BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

10788 Results

S.No.

Lab Name

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

7771

INDIAN TESTING LABORATORY PRIVATE LIMITED

IS 14333 (1996)

High Density Polyethylene Pipe For Sewerage -

PE 63, PE 80, PE 100

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10(Marking)	-	250	-
3(Designation)	-	250	-
4(Colour)	-	250	-
6(Dimensions of pipes)	-	500	-
7(Visual Appearance)	-	500	-
8.1(Hydraulic characteristics)	-	5000	-
8.2(Reversion)	-	1500	-
8.3(Density)	-	1000	-
8.4(Melt Flow Rate)	-	1500	-
Cl. 8.5, IS 2530-1963, Cl. 10(Cabon Black Content)	-	2000	-
Cl. 8.5, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	1500	-
5.1(High Density Polyethylene)	-	4500	-
5.2(Anti Oxident)	-	2500	-

15 Aug, 2028

-
Except- Anti-Oxidant test (Cl.5.2)

7772

INDIAN TESTING LABORATORY PRIVATE LIMITED

IS 14151 : Part 2 (2008)

Irrigation equipment - Sprinkler pipes - Specification: Part 2 quick coupled polyethylene pipes and fittings (Second Revision)

Group I - III

24500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.2.1 (Visual and Workmanship Requirement)	-	250	-
6.2, 6.2.1 (Quick Coupled Fittings)	-	250	-
6.1.3.2 (Quick coupled fittings)	-	250	-
6.1.3.1.1(Weldability Test)	-	2500	-
6.1.2.2( Hydraulic Proof Test)	-	1500	-
6.1.1, 6.1.1.1(Leakage Test)	-	1500	-
5.3(Dimensions of Quick Coupled Sprinkler Saddles Table 1.)	-	1500	-
5.2(Dimensions of Quick Coupled Pump Connectors Table 3.)	-	1500	-
4.2.7(Valve openers Table 1 of IS 8008 (Part 2))	-	1500	-
4.2.7(Insert vatve couplers Table 1 of IS 8008 (Part 3))	-	1500	-
4.2.7(End caps Table 1 of IS 8008 (Part 9))	-	2500	-
4.2.7(Pipe ends Table 1 of IS 8008 (Part 6))	-	2500	-
4.2.7(Ferrule reducers Table 1 of IS 8008 (Part 5))	-	2500	-
4.2.7(Reducers Table 1 and 2 of IS 8008 (Part 4))	-	2500	-
4.2.1(Quick Coupled ~pe HDPE Fittings)	-	2500	-
4.2.2(Quick Coupled ~pe HDPE Fittings)	-	2500	-
4.2.3(Quick Coupled ~pe HDPE Fittings)	-	2500	-
4.2.4(Quick Coupled ~pe HDPE Fittings)	-	2500	-
4.2.5(Quick Coupled ~pe HDPE Fittings)	-	2500	-
4.2.6(Quick Coupled ~pe HDPE Fittings)	-	2500	-
4.2.7(Quick Coupled ~pe HDPE Fittings)	-	2500	-
4.1.5(Rubber Ring)	-	1000	-
4.1.4(b)(Holding Attachments for Coupler Parts)	-	1000	-
4.1.4(a)(Holding Attachments for Coupler Parts)	-	1000	-
4.1 .3(Workmanship and Appearance)	-	5000	-
4.1 .1.2.2(HDPE couplers)	-	1000	-
4.1 .1.2.1(HDPE couplers)	-	1000	-
4.1 (b)(HDPE couplers —)	-	1000	-
4.1 (a)( Quick Coupled Male and Female Couplers)	-	1000	-
Cl.6.1.3(Weldability Test- b) Acceptance test)	-	2500	-
Cl.6.1.3(Weldability Test- a) Quality test)	-	5000	-
Cl 4.1.5(Rubber rings- B) Change in hardness)	-	1500	-
4.1.1.2.1(Density)	-	1000	-
4.1.1.2.1(Melt flow rate at 190°C/5 kg)	-	1000	-
4.1.1.2.1(Female coupler (min))	-	1000	-
4.1.1.2.1(Male coupler (min))	-	500	-
4.1.5(a. Identification of Rubber Ring)	-	1000	-
4.1.5(b. Colour of rubber ring)	-	1000	-
3.0((a) Carbon black content)	-	1500	-
3.0((b) Carbon black dispersion)	-	1000	-
3.0((a) Outside diameter)	-	1000	-
3.0((ii) Ovality)	-	500	-
3.0(Out of Squareness)	-	500	-
3.0(Reversion test)	-	1500	-
3.0(Tensile strength at yield)	-	1500	-
3.0(Elongation at break)	-	1000	-
3.0(Fusion Compatibility Test (i)Quality Test at 3.5MPa induced stress for 165 hours at 80°C)	-	5000	-
3.0(Fusion Compatibility Test (ii)Acceptance Test at 3.8MPa induced stress for 48 hours at 80°C)	-	2500	-
8(Marking)	-	250	-

15 Aug, 2028

-
-

7773

INDIAN TESTING LABORATORY PRIVATE LIMITED

IS 14151 : Part 1 (1999)

Irrigation equipment - Sprinkler pipes - Specification: Part 1 polyethylene pipes (First Revision)

Group I-III

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.3(CLASSIFICATION OF PIPES)	-	250	-
4.1(melt flow rating (MFR) shall not exceed 1.10 g/10 min.)	-	1500	-
4.1.1(density shall be between 940.4 kg/m’ and 958.4 kg/m3 (both inclusive) when determined at 27°C according to procedure prescribed in Annex A of IS 7328. The value of the density shall also not differ from the nominal value by more than 3 kg/m2 as per 5.2.1.1 of IS 7328.)	-	1000	-
4.1.2(The MFR of the material shall be between 0.2 to 1.1 (both inclusive) when tested at 190 T at a nominal load of 50 N by the method prescribed in 7 of IS 2530. The MFR of the material shall also be within 20% of the value declared by the manufacturer.’)	-	1500	-
Cl. 4.2 , IS 2530-1963, Cl. 10(Cabon Black Content)	-	2000	-
4.3(Anti-oxidant)	-	2500	-
5.1 table -1(DIMENSIONS OF PIPES)	-	500	-
5.1.2(Ovality)	-	250	-
6.1(VISUAL APPEARANCE)	-	250	-
Cl 7.1(Hydraulic Characteristics - Acceptance test)	-	2500	-
7.2(Reversion Test)	-	1500	-
7.3(Tensile Test)	-	1500	-
Cl.7.4(Fusion Compatibility Test- b) Acceptance test)	-	5000	-
7.5(Density)	-	1000	-
7.6(Melt now Rate (MFR))	-	1500	-
(Cl.4.2)(Carbon black- b) Dispersion of carbon black)	-	1000	-
(Cl.4.2)(Carbon black- a)carbon content)	-	2000	-
Cl.7.4(Fusion Compatibility Test- a) Quality test)	-	2500	-
Cl 7.1(Hydraulic Characteristics - Quality test)	-	2500	-
Cl.5(Dimensions of pipe - ii) Wall thickness maximum)	-	500	-
Cl.5(Dimensions of pipe - ii) Wall thickness minimum)	-	500	-
Cl.5(Dimensions of pipe - i) Outside diameter)	-	500	-
10(Marking)	-	250	-

15 Aug, 2028

-
Except- Anti-Oxidant test (Cl.4.3)

7774

INDIAN TESTING LABORATORY PRIVATE LIMITED

IS 15328 (2003)

Unplasticized Non-Pressure Polyvinyl Chloride ( PVC -U ) Pipes for use in Underground Drainage and Sewerage Systems -

Group I-III

22000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5,5.2(Composition of the material The material shall contain a minimum of 0.3 percent of rutile grade titanium dioxide.)	-	1000	-
6.1,6.1.1 IS 12235 (Part 1) Table 1(Dimension of Pipes: Mean outside Diameter, dem)	-	250	-
6.1,6.1.1 IS 12235 (Part 1) Table 1(Outside Diameter at any point, de)	-	250	-
6.1.2 IS 4985 Table 2(Wall Thickness, e )	-	250	-
6.1.3 (Length of Pipe)	-	250	-
6.1.4, Table 3(Dimensions of integral sockets and spigot ends :- a) Elastomeric Sealing Ringsockets and spigot ends i)Meean inside dia. Of socket, dsm)	-	250	-
6.1.4, Table 3(ii) Min. depth of engagement, A. )	-	250	-
6.1.4 Table 3(iii) Depth of sealing Zone C )	-	250	-
6.1.4, Table 3(iv) Length of spigot, l1)	-	250	-
6.1.4, Table 3(v) Chamfer length, H : Approx.)	-	250	-
6.1.4.1 (wall thickness of sockets e2 min=0.9e )	-	250	-
6.1.4.1 (e3min=0.75e)	-	250	-
6.1.4, Table 4(b) Solvent Cement Joint sockets and spigot ends i) Mean inside dia. Of socket, dsm)	-	250	-
6.1.4, Table 4(ii) Length of Solvent Cement socket, l2 )	-	250	-
6.1.4, Table 4(iii) Length of spigot, l1, 100 mm Min.)	-	250	-
6.1.4, Table 4(iv) Chamfer length, H, 7 mm Approx.)	-	250	-
7.1(Appearance:- )	-	250	-
7.2(Colour )	-	250	-
7.3 IS 1223S ( Part 2)(Vicat Softening Temperature When determined according to IS 1223S ( Part 2), shall not be lessthan 79°C.)	-	1500	-
7.4 IS 1223S ( Part 5)(Longitudinal Reversion: When tested according to the methodprescribed in IS 1223S ( Part 5), shall not exceed ± 5 percent. The pipe shall not exhibit any blisters, bubbles or crackson completion of the test.)	-	1500	-
8.1 Annex B(Resistance to External Blows at 0ºC: When tested according to the method prescribed in Annex B, the pipes hall have a true impact rate of not more than I0 percent.)	-	2000	-
8.2 Annex C Table 5(Ring Stiffness: When tested according to the method described in Annex C,the ring stiffness of the pipe shall be as stated in Table 5)	-	1500	-
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(Resistance to internal Hydrostatic Pressure(Type Test) a) Acceptance Test:(1h at 27 0 C) )	-	2500	-
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(b) Type Test:(1000h at 60 0 C) )	-	10000	-
9 9.1, IS 5382(JOINTS:- a) Elastomeric Sealing Rings)	-	1500	-
10.1.1 Annex D(Internal hydrostatic pressure test for elastomeric sealing ring joints)	-	2500	-
10.1.2 Annex E(Internal negative hydrostatic pressure test (internal vacuum) for elastomeric sealing ring joints)	-	2500	-
10.2.1(Internal hydrostatic pressure test for solvent cemented Joints)	-	2500	-
10.2.2(Internal negative hydrostatic pressure test (internal vacuum)for solvent cemented joints)	-	2500	-
'7.5 (amdt.7)(Effect on Water (Type test))	-	0	-
5.3(Qualitative)	-	0	-
12(Marking)	-	0	-

15 Aug, 2028

-
-

7775

INDIAN TESTING LABORATORY PRIVATE LIMITED

IS 13592 (2013)

Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Soil and Waste Discharge System Inside and Outside Buiildings Including Ventilation and Rainwater System

Type A & B

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5(Surface colour of the pipes shall be dark shade of grey)	-	200	-
Cl6.3(The composition shall be based on PVC resin having a K-value of 64 or greater when tested in accordance with IS 4669)	-	1500	-
Cl.7.1(Mean outside diameter, outside diameter at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-	250	-
Cl.7.1( outside diameter at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-	250	-
Cl.7.1( wall thickness at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-	250	-
Cl.7.2(Pipes shall be supplied in nominal lengths of 2, 3, 4 or 6 metres either plain or with socket for solvent cementing/grooved socket. Tolerances on specified length shall be + 10 mm and – 0 mm.The nominal length of the pipe with socket for solvent cementing/grooved socket shall be as given in Fig. 1.)	-	250	-
Cl.7.3.1(Minimum wall thickness of socket on pipes shall be as given in Table 2 read with Fig. 2 and Fig. 3.)	-	250	-
Cl.7.3.2(Dimensions of sockets for solvent cementing and grooved sockets of pipes shall be as given in Tables 3 and 4 respectively, read with Fig. 2 and 3.)	-	250	-
Cl.8.1(The internal and external surface of the pipes shall be smooth and clean, and free from grooving and other defects. The end shall be clearly cut and shall be square with the axis of the pipe. The end may be chamfered on the plain side.)	-	250	-
Cl.8.2(When tested by the method described in IS 12235 (Part 5), a length of pipe sample of 200 ± 20 mm shall not alter in length by more than 5 percent. In the case of socket ended pipes, this test shall be carried out on the plain portion of pipe taken at least 100 mm away from the root of the socket.)	-	1500	-
Cl8.3(This test shall be carried out for socket end pipes only. When tested by the method described in IS 12235 (Part 6), the test specimens shall not show blisters, excessive delamination or cracking or signs of weld line splitting.)	-	1500	-
Cl.8.4(When determined in accordance with IS 12235 (Part 2), the vicat softening temperature of the specimen shall not be less than 79°C.)	-	1500	-
Cl.8.5(After the required period of exposure, the tensile strengths of two samples when tested as per IS 12235 (Part 13) shall not show difference of more than 20 percent of their initial tensile strengths)	-	2500	-
Cl. 9, IS 12235 Part 7(Resistance to Sulphuric Acid)	-	2000	-
Cl.10.1(When tested by method prescribed in IS 12235 (Part 9),the pipe shall have a true impact rate of not more than 10 percent. Mass of striker and height of fall shall be as per Annex A.)	-	1500	-
Cl.10.2(When determined in accordance with the method described in IS 12235 (Part 13), the tensile strength at break shall not be less than 45 MPa.)	-	1500	-
Cl.10.3(The axial shrinkage shall not exceed 2 percent when determined in accordance with Annex B.)	-	1500	-
Cl.11.(Jointing of solvent cementing joints is to be carried out using solvent conforming to IS 14182. Apply a pressure of 0.05 MPa for a period of 15 min and there should be no leakage at any joint.)	-	1500	-
Cl. 12, IS 12235 Part 11(Resistance to Di-Chloro-Methane)	-	1200	-
8.6(Effect on Water Test)	-	3500	-
14(Marking)	-	250	-

15 Aug, 2028

-
-

7776

INDIAN TESTING LABORATORY PRIVATE LIMITED

IS 12701 (1996)

Rotational moulded polyethylene water storage tanks - specification (First Revision)

Group 1, 2, 3 & 4 CYLINDRICAL & VERTICAL TANKS

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.3(Carbon Black Content )	-	1500	-
4.2.3(Carbon Dispersion Test)	-	1000	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	1000	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	1000	-
6.1(Finish)	-	500	-
7.1.1(Resistance to Deformation)	-	1500	-
7.1.2(Resistance to Deformation)	-	1500	-
7.2(Resistance to Impact)	-	2000	-
7.3(Test for Top Load Resistance)	-	1500	-
7.4(Tensile Strength)	-	1500	-
7.5(Flexural Modulus)	-	2500	-
7.6(overall Migration)	-	3500	-
9.2.1(Man-Hole and Hand-Hole Lids)	-	1000	-
9.1(Lid Thickness)	-	750	-
5.4(Wall Thickness above effective height)	-	750	-
5.2 Table 2 (7)(Minimum Wall Thickness)	-	750	-
5.1 Table 1 (7)(Minimum Weight of Tank (Without Lid))	-	750	-
4.2.1(Density)	-	1500	-
4.2.2(MFI)	-	1500	-
4.1(MATERIALS)	-	250	-
10(MARKING)	-	250	-

15 Aug, 2028

-
-

7777

Alpha Test House Services LLP

IS 1239 : Part 1 (2004)

Steel tubes, tubulars and other wrought steel fittings - Specification: Part 1 steel tubes (Sixth Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(Outer Diameter, Thickness & Mass)	-	500	15% DISCOUNT TO BIS
Cl 10.1(Manufacturing )	-	1000	15% DISCOUNT TO BIS
Cl 10.1.1(Manufacturing )	-	1000	15% DISCOUNT TO BIS
Cl 12(Workmanship)	-	1000	15% DISCOUNT TO BIS
Cl 14(Tensile Test, Flattening Test & Bend Test)	-	4000	15% DISCOUNT TO BIS
Cl 15(Workmanship)	-	1000	15% DISCOUNT TO BIS
7, 6.1.1(CARBON)	-	250	15% DISCOUNT TO BIS
7, 6.1.1(SULPHUR)	-	250	15% DISCOUNT TO BIS
7, 6.1.1(PHOSPHURS)	-	250	15% DISCOUNT TO BIS
7, 6.1.1(MANGANESE)	-	250	15% DISCOUNT TO BIS
7, 6.1.1(NITROGEN)	-	250	15% DISCOUNT TO BIS
7, 6.1.1(SILICON)	-	250	15% DISCOUNT TO BIS
7, 6.1.1(ALUMINIUM)	-	250	15% DISCOUNT TO BIS
Clause 8.1 (Table3,4,5)(Nominal Bore)	-	100	15% DISCOUNT TO BIS
Clause 11.1(Random Length)	-	100	15% DISCOUNT TO BIS
Clause 11.2(Exact Length)	-	100	15% DISCOUNT TO BIS
Clause 11.3(Approximate Length)	-	200	15% DISCOUNT TO BIS
Cl. 14.1.1(Elongation)	-	500	15% DISCOUNT TO BIS
12 AND AS PER IS 4736(MASS OF ZINC COATING)	-	1000	15% DISCOUNT TO BIS
12 AND AS PER IS 4736(UNIFORMITY OF ZINC COATING)	-	1000	15% DISCOUNT TO BIS
Clause - 6.1.1, Table-1(NITROGEN)	-	250	15% DISCOUNT TO BIS
Cl 8(Outer Diameter, Thickness & Mass)	-	500	15% DISCOUNT TO BIS
Cl 10.1(Manufacturing )	-	1000	15% DISCOUNT TO BIS
Cl 10.1.1(Manufacturing )	-	1000	15% DISCOUNT TO BIS
Cl 12(Workmanship)	-	1000	15% DISCOUNT TO BIS
Cl 14(Tensile Test, Flattening Test & Bend Test)	-	4000	15% DISCOUNT TO BIS
Cl 15(Workmanship)	-	100	15% DISCOUNT TO BIS
7, 6.1.1(CARBON)	-	250	15% DISCOUNT TO BIS
7, 6.1.1(SULPHUR)	-	250	15% DISCOUNT TO BIS
7, 6.1.1(PHOSPHURS)	-	250	15% DISCOUNT TO BIS
7, 6.1.1(MANGANESE)	-	250	15% DISCOUNT TO BIS
7, 6.1.1(NITROGEN)	-	250	15% DISCOUNT TO BIS
7, 6.1.1(SILICON)	-	250	15% DISCOUNT TO BIS
7, 6.1.1(ALUMINIUM)	-	250	15% DISCOUNT TO BIS
Clause 8.1 (Table3,4,5)(Nominal Bore)	-	100	15% DISCOUNT TO BIS
Clause 11.1(Random Length)	-	100	15% DISCOUNT TO BIS
Clause 11.2(Exact Length)	-	100	15% DISCOUNT TO BIS
Clause 11.3(Approximate Length)	-	200	15% DISCOUNT TO BIS
Cl. 14.1.1(Elongation)	-	500	15% DISCOUNT TO BIS
12 AND AS PER IS 4736(MASS OF ZINC COATING)	-	100	15% DISCOUNT TO BIS
12 AND AS PER IS 4736(UNIFORMITY OF ZINC COATING)	-	1000	15% DISCOUNT TO BIS
Clause - 6.1.1, Table-1(NITROGEN)	-	250	15% DISCOUNT TO BIS
13.0(Leak Proof Test)	-	1500	15% DISCOUNT TO BIS

31 Dec, 2026

-
-

7778

INDIAN TESTING LABORATORY PRIVATE LIMITED

IS 1489 : Part 2 (2015)

Portland - Pozzolana cement - Specification: Part 2 calcined clay based

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	500	-
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	500	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	500	-
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	500	-
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	500	-
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	750	-
7 -Table 2- i(Fineness 4031 Part 2)	-	500	-
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	500	-
7 -Table 2- ii- a(Expansion after aeration - 4031 Part 3)	-	500	-
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	500	-
7 -Table 2- ii- b(Expansion after aeration- 4031 Part 3)	-	500	-
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	500	-
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	500	-
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1500	-
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1200	-
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1000	-
7 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	1000	-
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	1500	-
11(Marking)	-	250	-
4(RAW MATERIAL)	-	250	-

15 Aug, 2028

-
-

7779

INDIAN TESTING LABORATORY PRIVATE LIMITED

IS 1489 (Part 1) (2015)

Portland pozzolana cement - Specification: Part 1 fly Ash Based

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	1200	-
7 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	1000	-
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1200	-
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1000	-
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	700	-
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	500	-
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	500	-
7 -Table 2- ii- b(Expansion after aeration- 4031 Part 3)	-	500	-
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	500	-
7 -Table 2- ii- a(Expansion after aeration - 4031 Part 3)	-	500	-
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	500	-
7 -Table 2- i(Fineness 4031 Part 2)	-	500	-
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	500	-
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	500	-
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	500	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	500	-
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	500	-
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	500	-
11(Marking)	-	250	-
4(RAW MATERIAL)	-	250	-

15 Aug, 2028

-
-

7780

INDIAN TESTING LABORATORY PRIVATE LIMITED

IS 2185 : Part 3 (1984)

Concrete Masonry Units Part 3 Autoclaved Cellular Aerated Concrete Blocks

GRADE A,B,C

22500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Physical requirments)	-	500	-
8.2(Physical requirments-Dimensions-Length)	-	250	-
8.2(Physical requirments-Dimensions-Height)	-	250	-
8.2(Physical requirments-Dimensions-Width)	-	250	-
8.3(Physical requirments- Block density)	-	2500	-
8.4(Physical requirments- Compressive strength)	-	2500	-
8.5(Thermal Conductivity)	-	8500	-
8.6( Drying Shrinkage )	-	5000	-
8.4, 9.2 & 11.3(Indivisual Moisture Content)	-	1500	-
8.4, 9.2 & 11.3(Indivisual Bulk density)	-	2500	-
8.4, 9.2 & 11.3 & Table 1(Indivisual Compressive strength)	-	2500	-
8.3 & 9.1(Indivisual Moisture Content)	-	1500	-
8.3 & 9.1 Table 1(Indivisual Block Density)	-	1500	-
3.2 & 8.2(Indivisual Height)	-	500	-
3.2 & 8.2(Indivisual Width)	-	500	-
3.2 & 8.2(Indivisual Length)	-	500	-
8.6, 9.4 & 11.5(Grade)	-	250	-
3.4(Special Faces)	-	250	-
3.3(Faces & Arises)	-	250	-
3.1(Shape)	-	250	-
8.1.1(General (Exposed wall construction))	-	250	-
5(MA TEIUA.LS)	-	250	-
7(SURI'ACE TUTUU AND FINISH)	-	250	-
9.3(Thermal Conductivity)	-	8500	-
15(Marking)	-	250	-

15 Aug, 2028

-
-

7781

INDIAN TESTING LABORATORY PRIVATE LIMITED

IS 15477 (2019)

Adhesives for use with ceramic tiles and mosaics

TYPE-1,2,3,4 &5

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Classification)	-	500	-
5.1(Tensile Adhesion Strength )	-	5000	-
5.2(Shear Adhesion Strength )	-	5000	-
5.3(OpenTime)	-	2500	-
5.4(Adjustment Time)	-	2500	-
5.5(Slip (Required for Vertical Application Only))	-	5000	-
5.6(Deformability (Required for VerticalApplication Only))	-	5000	-
8.2(Marking)	-	250	-

15 Aug, 2028

-
-

7782

INDIAN TESTING LABORATORY PRIVATE LIMITED

IS 1239 : Part 1 (2004)

Steel tubes, tubulars and other wrought steel fittings - Specification: Part 1 steel tubes (Sixth Revision)

Yst210, Yst240 etc

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(Outer Diameter, Thickness & Mass)	-	500	-
Cl 14(Tensile Test, Flattening Test & Bend Test)	-	1500	-
7, 6.1.1(CARBON)	-	500	-
7, 6.1.1(SULPHUR)	-	500	-
7, 6.1.1(PHOSPHURS)	-	500	-
7, 6.1.1(MANGANESE)	-	500	-
Cl 10.1.1(Manufacturing )	-	500	-
Clause 11.1(Random Length)	-	500	-
Clause 11.2(Exact Length)	-	500	-
Clause 14.1.1(Elongation Percent)	-	500	-
Cl. 8 Table 3,4 & 5(Outside Diameter)	-	500	-
Cl. 8, 9 Table 3,4 & 5(Thickness)	-	500	-
Cl. 14.1(Tensile Strength)	-	1000	-
Cl. 14.2(Bend Test (uto and including 50 mm NB))	-	750	-
Cl 12(Workmanship)	-	250	-
7, 6.1.1(NITROGEN)	-	500	-
7, 6.1.1(SILICON)	-	500	-
7, 6.1.1(ALUMINIUM)	-	500	-
6.2 AND AS PER IS 10748(CARBON EQUIVALENT)	-	250	-
6.2 AND AS PER IS 10748(MICRO ALLOY)	-	750	-

15 Aug, 2028

-
-

7783

INDIAN TESTING LABORATORY PRIVATE LIMITED

IS 2062 (2011)

Hot rolled medium and high tensile structural steel - Specification (Seventh Revision)

E250, E275, E300, E350, E410, E450, E550, E600, E650

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 18(Weight)	-	500	-
Cl 15(Length, Width & Thickness)	-	500	-
Clause - 5, 8.1 & 8.2(E650, CARBON)	-	500	-
Clause - 5, 8.1 & 8.2(E650 ,MANGANESE)	-	500	-
Cl. 10.3 (Cl. 10.3 (Tensile Strength))	-	1000	-
Cl 12(Sudden Load Applied)	-	1200	-
Cl 11.3(Press)	-	500	-
Cl 10.3(UTM)	-	1000	-
Cl 7(Workmanship)	-	500	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon Equivalent- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
20(Marking)	-	500	-

15 Aug, 2028

-
Except- Y Groove Crackability test (Cl.13) & Other tests (Cl.14)

7784

INDIAN TESTING LABORATORY PRIVATE LIMITED

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

Group 1-6

11500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 9.4(Load In Other Direction From Bend)	-	500	-
Cl 9.3(Load In One Direction)	-	500	-
Cl 7.2(Weight)	-	500	-
Cl 6.1(Length, Width & Thickness)	-	500	-
Cl 5(Deformations and Surface Characteristics)	-	500	-
Cl 8.1(UTM)	-	1500	-
4.1(Sulphur and phosphorous)	-	500	-
4.1(CE)	-	250	-
4.1( Nitrogen%)	-	500	-
4.1(Ni)	-	500	-
4.1(Mo)	-	500	-
4.1(Cr)	-	500	-
4.1( Ti)	-	500	-
4.1(V)	-	500	-
4.1( Nb)	-	500	-
4.1( Aluminium %)	-	500	-
4.1( Copper %)	-	500	-
4.1(Silicon %)	-	500	-
4.1(Sulphur %)	-	500	-
4.1(Phosphorus %)	-	500	-
4.1(Manganese %)	-	500	-
4.1(Carbon %)	-	500	-
Cl.9.4 & Cl. 9.4.1(Rebend test)	-	1000	-
Cl. 9.3, Table 4(Bend Test )	-	1000	-
Cl. 8.1 Table 3(Elongation, percentage)	-	500	-
Cl. 8.1 Table 3(TS/YS ratio)	-	250	-
Cl. 8.1 Table 3(Tensile Strength (TS))	-	1000	-
Cl. 8.1 Table 3(Yield Stress (YS))	-	1000	-
Cl. 7.2 Table -2 (Nominal Mass)	-	500	-
Cl. 6.1(Nominal Size)	-	250	-
Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar))	-	250	-
Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), )	-	250	-
8.18.1 Table 3(Total elongation at maximum force)	-	250	-
Cl. 6.2, 6.3 Table 1(Gross Cross Sectional Area, A)	-	250	-
Cl. 4.3(Visual Inspection.)	-	250	-

15 Aug, 2028

-
Except- Pull out test

7785

INDIAN TESTING LABORATORY PRIVATE LIMITED

IS 9537 : Part 3 (1983)

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials

Light ,Medium, heavy Mechanical Stresses, 20mm -63 mm

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Marking)	-	250	-
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	250	-
7.1.1(Maximum and minimum outside diameter of socket)	-	250	-
7.1.1 Table-2(Length of Socket end)	-	250	-
7.2(Minimum inside diameter of conduit)	-	250	-
7.3(Length of conduit)	-	250	-
7.4(Unifomity of The wall Thickness)	-	250	-
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	1500	-
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	1200	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	2000	-
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	1000	-
10(Resistance to Heat -Ball presure test)	-	1000	-
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	1000	-
12(Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	2000	-
12(Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	1500	-
7.1.2(Maximum and minimum outside diameter of conduit)	-	500	-
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	500	-
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	250	-

15 Aug, 2028

-
Upto 50mm size

7786

INDIAN TESTING LABORATORY PRIVATE LIMITED

IS 14255 (1995)

Aertal bunched cables - For working voltages up to and including 1100 Volts - Specification

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.4(size of street lighting conductor)	-	150	-
6.5(Size of messenger conductor )	-	150	-
6.6(Joints in messenger conductor )	-	150	-
6.6(Direction of outer layer)	-	150	-
7.1(Insulation)	-	150	-
7.2( Thickness of insulation)	-	250	-
7.3(Tolerance on thickness of insulation )	-	250	-
7.4(Aplication of the insulation )	-	250	-
7.5(Colour of the insulation )	-	250	-
8.1(Core identification)	-	250	-
8.2(Core identification)	-	250	-
8.3(Identification by other means)	-	250	-
9.1(Assembly (Laying up))	-	250	-
9.2(Assembly (Laying up))	-	250	-
9.3(Direction of lay)	-	250	-
10.1 a) i)(Tests on phase/street light conductor: tensile test - Test method IS10810:Part 2)	-	250	-
10.1 a) ii)(Wrapping test - 10810: Part 3)	-	250	-
10.1 a) iii)(Resistance test - IS10810: Part 5)	-	1000	-
10.1 b) i)(Test on messenger conductor: Breaking load - IS 10810: Part 2)	-	1000	-
10.1 b) ii)(Test on messenger conductor: Elongation test - Cl 11.3)	-	1000	-
10.1 b) iii)(Test on messenger conductor: Resistance test - IS 10810: Part 5)	-	1500	-
10.1 c) i)(Physical tests for XLPE Insulation: Tensile strength - IS 10810: Part 7)	-	1500	-
10.1 c) i)(Physical tests for XLPE Insulation: elongation at break - IS 10810: part 7)	-	1000	-
10.1 c) ii)(Ageing in air oven : Tensile strength variation - IS 10810:Part 11)	-	2500	-
10.1 c) ii)(Ageing in air oven : Elongation variation- IS 10810: Part 11)	-	2500	-
10.1 c) iii)(Hot set test: Elongation under load - IS 10810: Part 30)	-	1500	-
10.1 c) iii)(Hot set test: Permanent elongation (set) after cooling - IS 10810: Part 30)	-	1500	-
10.1 c) iv)(Shrinkage test : Shrinkage - 10810:Part 12)	-	1000	-
10.1 c) iv)(Shrinkage test : Crack Observed - 10810:Part 12)	-	1000	-
10.1 c) v)(Water ahsorption (Gravimetric) - IS 10810: Part 33 )	-	1500	-
10.1 d) i)(Physical test for PE insulation: Tensile strength - IS 10810: Part 7 )	-	1500	-
10.1 d) i)(Physical test for PE insulation: elongation at break - IS 10810: Part 7)	-	1500	-
10.1 d) ii)(Melt flow index- IS 10810: Part 23)	-	1200	-
10.1 d) iv)(Vicat softening point -IS 10810: Part 22)	-	1000	-
10.1 d) v)(Environmental stress cracking -IS 10810:Part29)	-	1500	-
10.1 f)(Insulation resistance (Volume resistivity) test a) volume resistivity at 27°C - IS 10810: Part 43)	-	1200	-
10.1 f)(Insulation resistance (Volume resistivity) test b) volume resistivity at 70°C - IS 10810: Part 43)	-	1200	-
10.1 g)(High voltage test - IS10810:Part 45)	-	1200	-
11.4(Bending Test on the Completed Cable ( Optional) )	-	1000	-

15 Aug, 2028

-
-

7787

INDIAN TESTING LABORATORY PRIVATE LIMITED

IS 7098 : Part 1 (1988)

Specification for crosslinked polyethylene insulated pvc sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(CONDUCTOR: MATERIALS)	-	100	-
4(INSULATION : MATERIALS)	-	100	-
5.1(FILLER AND INNER SHEATH)	-	100	-
5.2(FILLER AND INNER SHEATH)	-	100	-
6(ARMOURING)	-	100	-
7(OUTER SHEATH)	-	100	-
8.1(CONDUCTOR: CONSTRUCTION)	-	100	-
8.2(PROTECTIVE BARRIER)	-	100	-
8.3(SIZE OF NEUTRAL CONDUCTOR)	-	100	-
9.2(Thickness of Insulation - Average)	-	500	-
9.3(Thickness of Insulation - Minimum)	-	500	-
9.4(Application of Insulation)	-	100	-
10.1(Core Identification)	-	100	-
10.2(Core Identification- Neutral)	-	100	-
10.3(Core Identification by number )	-	100	-
10.4(Core Identification by number - Neutral )	-	100	-
11(LAVING UP OF CORES)	-	100	-
12.1 & 12.2(Inner sheath : Application)	-	100	-
13.1(Armouring: Application)	-	100	-
13.1.2(Armouring: Coverage )	-	100	-
13.1.3(Armouring: Direction of Lay )	-	100	-
13.2(Type of armour )	-	100	-
13.3(Armouring : Dimensions -Wire Diameter)	-	500	-
13.3(Armouring : Dimensions -Formed wire )	-	500	-
13.4(Armour: Joint)	-	250	-
13.5(Armouring : Resistance Test)	-	1500	-
13.6 a)(ARMOURING: Tensile Strength)	-	1500	-
13.6 b)(ARMOURING: Elongation )	-	1000	-
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	1000	-
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	500	-
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	1000	-
13.6 f)(ARMOURING: Mass of zinc coating )	-	750	-
13.6 g)(ARMOURING: Resistivity)	-	1000	-
14.1(Outer Sheath : Application)	-	100	-
14.2(Colour of outer sheath)	-	250	-
14.3(Thickness of outer sheath - AVERAGE)	-	500	-
14.3(Thickness of outer sheath - minimum)	-	500	-
15.1 a) i)(Annealing Test ( For copper wire ) )	-	750	-
15.1 a) ii)(Tensile test (for aluminium) - Before stranding )	-	750	-
15.1 a) ii)(Tensile test (for aluminium) - After stranding )	-	750	-
15.1 a) iii)(Wrapping test (for aluminium))	-	750	-
15.1 a) iv)(Resistance test - Main conductor)	-	1000	-
15.1 a) iv)(Resistance test - Neutral conductor)	-	750	-
15.1 d) i) (Phyaical tests for insulation : Tensile Test)	-	750	-
15.1 d) i) (Phyaical tests for insulation : Elongation)	-	750	-
15.1 d) ii) (Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	1500	-
15.1 d) ii) (Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	1500	-
15.1 d) iii) (Phyaical tests for insulation : Hot set )	-	1500	-
15.1 d) iii) (Phyaical tests for insulation : Permanent set )	-	1200	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage )	-	1000	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage - Crack observed )	-	500	-
15.1 d) v) (Insulation: Waterabsorption(gravimetric))	-	1500	-
15.1 e) i) (Physical tests for outer sheath : Tensile stregth)	-	1000	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation )	-	1500	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	1000	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	1500	-
15.1 e) iii) (Sheath: Loss of mass in air oven)	-	1500	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage )	-	1000	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage - Crack observed )	-	1000	-
15.1 e) v) (Sheath : Hot deformation)	-	1000	-
15.1 e) vi) (Sheath : Heat shock test)	-	1000	-
15.1 e) vii) (Sheath : Thermalstability)	-	1000	-
15.1 f)(INSULATION RESISTANCE TEST : Volume resistivity )	-	1500	-
16.2(HIGH VOLTAGE TEST )	-	1500	-
16.3(FLAMMABILITY TEST : Period of Burning )	-	1000	-
16.3(FLAMMABILITY TEST : Unaffected length )	-	500	-
16.9(Oxygen Index Test)	-	2500	-
16.1(Flame Retardance Test on Single Cables)	-	5000	-
16.11(Flame Retardance Test on Bunched Cables)	-	5000	-
16.13(Test for Halogen Acid Gas Evolution)	-	1800	-
16.14(Temperature Index)	-	2500	-
Table 4(Copper purity test)	-	1500	-
Cl No. 16.15(Smoke density test)	-	2500	-

15 Aug, 2028

-
-

7788

INDIAN TESTING LABORATORY PRIVATE LIMITED

IS 1554 : Part 1 (1988)

Specification for pvc insulated (Heavy Duty) electric cables: Part 1 for working voltages up to and including 1100 v (Third Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(MATERIALS : CONDUCTOR)	-	100	-
4.1.1(INSULATION : General Purjose Insulaiion)	-	100	-
4.1.2(INSULATION : Heat Resisting Insulation)	-	750	-
5.1(MATERIALS : FILLER AND INNER SHEATH)	-	100	-
5.2(MATERIALS : FILLER AND INNER SHEATH)	-	100	-
6.1(MATERIALS : ARMGURING)	-	100	-
6.2(MATERIALS : ARMGURING)	-	100	-
7.1.1(OUTER SHEATH : For Cables with General Purpose InsuIafion)	-	100	-
7.1.2(OUTER SHEATH : For Cables with Heat Resisting InsuIalion)	-	100	-
8.1(CONSTRUCTION : CONDUCTOR)	-	100	-
9.1(INSULATION )	-	100	-
9.2(INSULATION : Thickness of Insulation)	-	500	-
9.3(INSULATION :Tolerance on Thickness of Insulation)	-	250	-
9.4(INSULATION : Application of Insulation)	-	100	-
10.1(CORE IDENTIFICATION)	-	100	-
10.2(CORE IDENTIFICATION)	-	100	-
10.3(CORE IDENTIFICATION)	-	100	-
11.1(LAYING UP OF CORES)	-	100	-
11.2(LAYING UP OF CORES)	-	100	-
12.1(INNER SHEATH)	-	100	-
12.2(INNER SHEATH)	-	100	-
12.3(INNER SHEATH :Thickness of Inner Sheath)	-	100	-
13.1.1(ARMOURING : Application)	-	100	-
13.1.2(Armouring: Coverage )	-	100	-
13.1.3(ARMOURING : Direction of lay )	-	100	-
13.1.4(ARMOURING : Application)	-	100	-
13.2.1(ARMOURING : Type of Armour)	-	100	-
13.3(Armouring : Dimensions -Wire Diameter)	-	500	-
13.3(Armouring : Dimensions -Formed wire )	-	500	-
13.4(ARMOURING : Joints)	-	100	-
13.5.1(ARMOURING : Resistance)	-	500	-
13.5.2(ARMOURING : Resistance)	-	500	-
13.6 a)(ARMOURING: Tensile Strength)	-	1000	-
13.6 b)(ARMOURING: Elongation )	-	500	-
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	1000	-
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	5000	-
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	750	-
13.6 f)(ARMOURING: Mass of zinc coating )	-	750	-
13.6 g)(ARMOURING: Resistivity)	-	1000	-
14.1(OUTER SHEATH)	-	500	-
14.2(OUTER SHEATH)	-	500	-
14.3(OUTER SHEATH : Colour )	-	100	-
14.4.1(Thickness of Outer Sheath : Unarmowed Cables)	-	500	-
14.4.2(Thickness of Outer Sheath : Armoured Cables)	-	500	-
15.1 a) 1)(Tests on conductor : Annealing test ( for copper ))	-	750	-
15.1 a) 2)(Tensile test (for aluminium) - Before stranding )	-	1000	-
15.1 a) 2)(Tensile test (for aluminium) - After stranding )	-	1000	-
15.1 a) 3)(Tests on conductor : Wrapping test ( for aluminium ))	-	750	-
15.1 a) 4)(Tests on conductor : Conductor resistance test)	-	750	-
15.1 a) 4)(Resistance test - Neutral conductor )	-	750	-
15.1 d)1)(Phyaical tests for insulation : Tensile Test)	-	750	-
15.1 d)1)(Phyaical tests for insulation : Elongation )	-	500	-
15.1 d)1)(Physical tests for sheath : Tensile stregth )	-	1000	-
15.1 d)1)(Physical tests for sheath : Elongation )	-	1000	-
15.1 d)2)(Phyaical tests for insulation- Ageing in air Oven : Tensile Test)	-	1500	-
15.1 d)2)(Phyaical tests for insulation - Ageing in air oven : Elongation )	-	1500	-
15.1 d)2)(Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	1500	-
15.1 d)2)(Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	1000	-
15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	1000	-
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation )	-	1000	-
15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	1000	-
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	1000	-
15.1 d)3)(Phyaical tests for insulation : Shrinkage )	-	1000	-
15.1 d)3)(Phyaical tests for insulation : Shrinkage - Crack observed )	-	1000	-
15.1 d)3)(Phyaical tests for Sheath : Shrinkage )	-	1000	-
15.1 d)3)(Phyaical tests for Sheath : Shrinkage - Crack observed )	-	1000	-
15.1 d)4)(Hot deformation : Insulation )	-	1000	-
15.1 d)4)(Hot deformation : Sheath )	-	1000	-
15.1 d)5)( Loss of mass in air oven- Insulation )	-	1500	-
15.1 d)5)( Loss of mass in air oven- sheath )	-	1000	-
15.1 d)6)(Heat shock test- Insulation )	-	1000	-
15.1 d)6)(Heat shock test- sheath )	-	1000	-
15.1 d)7)(Thermal stability- insulation )	-	1000	-
15.1 d)7)(Thermal stability- Sheath )	-	1000	-
15.1 e)(Insulation resistance test : Volume Resistivity )	-	1000	-
15.1 e)(Insulation resistance test : IR Constant )	-	1000	-
15.1 f)(High voltage test ( water immersion test ))	-	1500	-
15.1 g)(High voltage test at room temperature)	-	1000	-
15.4 a)(Cold bend test- Insulation ( Optional test))	-	750	-
15.4 a)(Cold bend test- Sheath ( Optional test))	-	750	-
15.4 b)(Cold impact test- Insulation ( Optional test))	-	750	-
15.4 b)(Cold impact test- Sheath ( Optional test))	-	750	-
15.4 c)(Armour resistance test ( for other than mining cables ).- Optional test )	-	1000	-
16.2(DETAILS OF TESTS : High Voltage Test at Room Temperature)	-	1500	-
16.3.1(High Voltage Test ( Water Immersion Test ) : a.c. Test)	-	1000	-
16.3.2(High Voltage Test ( Water Immersion Test ) : d.c. Test)	-	1000	-
16.4(Flammability Test)	-	750	-
16.5(Oxygen Index Test)	-	2500	-
16.6(Flame Retardance Test on Single Cables)	-	4500	-
16.7(Flame Retardance Test on Bunched Cables)	-	4500	-
16.9(Test for Halogen Acid Gas Evolution)	-	2500	-
16.1(Temperature Index)	-	2500	-
Cl No. 16.10(Smoke density test)	-	2500	-
Table 4(Copper purity test)	-	1000	-

15 Aug, 2028

-
-

7789

Alpha Test House Services LLP

IS 6911 (2017)

Stainless steel plate, sheet and strip - Specification (Second Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.1 & 7.2 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	15% DISCOUNT TO BIS
Cl. 7.1 & 7.2 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	15% DISCOUNT TO BIS
Cl. 7.1 & 7.2 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	15% DISCOUNT TO BIS
Cl. 7.1 & 7.2 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	15% DISCOUNT TO BIS
Cl. 7.1 & 7.2 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	15% DISCOUNT TO BIS
Cl. 7.1 & 7.2 Table 1(Molybdenum -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	15% DISCOUNT TO BIS
Cl. 7.1 & 7.2 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	15% DISCOUNT TO BIS
Cl. 7.1 & 7.2 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	15% DISCOUNT TO BIS
Cl. 7.1 & 7.2 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	15% DISCOUNT TO BIS
Cl. 7.1 & 7.2 Table 1(Copper -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	15% DISCOUNT TO BIS
Cl. 7.1 & 7.2 Table 1(Others-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	15% DISCOUNT TO BIS
Cl. 7.1 & 7.2 Table 1(Titanium-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	15% DISCOUNT TO BIS
Cl. 7.1 & 7.2 Table 1(Niobium-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	15% DISCOUNT TO BIS
Cl.12(Corrosion Resistance- IS 10461(Part1))	-	2500	15% DISCOUNT TO BIS
Cl.12(Corrosion Resistance- IS 10461(Part2))	-	2500	15% DISCOUNT TO BIS
6(Freedom from defects , IS 6911)	-	300	15% DISCOUNT TO BIS
10.1,Table 4&Table 6(Tensile Test - IS 1608(Pt -1))	-	1000	15% DISCOUNT TO BIS
10.2,Table 4&Table 5(Hardness Test- IS 1500(Pt -1),IS 1501 (Pt-1),IS 1586 (Pt -1))	-	2000	15% DISCOUNT TO BIS
10.3(Bend Test - IS 1599)	-	500	15% DISCOUNT TO BIS
11,Table 7(Erichsen cupping test-IS 10175)	-	2000	15% DISCOUNT TO BIS
15(Surface Finish)	-	300	15% DISCOUNT TO BIS
17(Dimension and tolerance)	-	300	15% DISCOUNT TO BIS
10.1 Amd 2(Yeild Strength)	-	1000	15% DISCOUNT TO BIS
10.1 Amd 2(0.2 Percent Proof Stress)	-	500	15% DISCOUNT TO BIS
10.1 Amd 2(Elongation)	-	1000	15% DISCOUNT TO BIS
Clause 17 , Table 9 to Table 19(Dimension (Length))	-	300	15% DISCOUNT TO BIS
Clause 17 , Table 9 to Table 19(Dimension (Width))	-	300	15% DISCOUNT TO BIS
Clause 17 , Table 9 to Table 19(Dimension (Thickness))	-	300	15% DISCOUNT TO BIS
Clause 17 , Table 9 to Table 19(Flatness)	-	100	15% DISCOUNT TO BIS
Clause 17 , Table 9 to Table 19(Camber)	-	100	15% DISCOUNT TO BIS
Cl. 7.1 & 7.2 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	15% DISCOUNT TO BIS
Cl. 7.1 & 7.2 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	15% DISCOUNT TO BIS
Cl. 7.1 & 7.2 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	15% DISCOUNT TO BIS
Cl. 7.1 & 7.2 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	15% DISCOUNT TO BIS
Cl. 7.1 & 7.2 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	15% DISCOUNT TO BIS
Cl. 7.1 & 7.2 Table 1(Molybdenum -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	15% DISCOUNT TO BIS
Cl. 7.1 & 7.2 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	15% DISCOUNT TO BIS
Cl. 7.1 & 7.2 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	15% DISCOUNT TO BIS
Cl. 7.1 & 7.2 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	15% DISCOUNT TO BIS
Cl. 7.1 & 7.2 Table 1(Copper -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	15% DISCOUNT TO BIS
Cl. 7.1 & 7.2 Table 1(Others-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	15% DISCOUNT TO BIS
Cl. 7.1 & 7.2 Table 1(Titanium-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	15% DISCOUNT TO BIS
Cl. 7.1 & 7.2 Table 1(Niobium-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	15% DISCOUNT TO BIS
Cl.12(Corrosion Resistance- IS 10461(Part1))	-	2500	15% DISCOUNT TO BIS
Cl.12(Corrosion Resistance- IS 10461(Part2))	-	2500	15% DISCOUNT TO BIS
6(Freedom from defects , IS 6911)	-	300	15% DISCOUNT TO BIS
10.1,Table 4&Table 6(Tensile Test - IS 1608(Pt -1))	-	1000	15% DISCOUNT TO BIS
10.2,Table 4&Table 5(Hardness Test- IS 1500(Pt -1),IS 1501 (Pt-1),IS 1586 (Pt -1))	-	2000	15% DISCOUNT TO BIS
10.3(Bend Test - IS 1599)	-	500	15% DISCOUNT TO BIS
11,Table 7(Erichsen cupping test-IS 10175)	-	2000	15% DISCOUNT TO BIS
15(Surface Finish)	-	300	15% DISCOUNT TO BIS
17(Dimension and tolerance)	-	300	15% DISCOUNT TO BIS
10.1 Amd 2(Yeild Strength)	-	1000	15% DISCOUNT TO BIS
10.1 Amd 2(0.2 Percent Proof Stress)	-	500	15% DISCOUNT TO BIS
10.1 Amd 2(Elongation)	-	1000	15% DISCOUNT TO BIS
Clause 17 , Table 9 to Table 19(Dimension (Length))	-	300	15% DISCOUNT TO BIS
Clause 17 , Table 9 to Table 19(Dimension (Width))	-	300	15% DISCOUNT TO BIS
Clause 17 , Table 9 to Table 19(Dimension (Thickness))	-	300	15% DISCOUNT TO BIS
Clause 17 , Table 9 to Table 19(Flatness)	-	300	15% DISCOUNT TO BIS
Clause 17 , Table 9 to Table 19(Camber)	-	300	15% DISCOUNT TO BIS

31 Dec, 2026

-
Included w.e.f. 07.11.2023

7790

Conformity Testing Labs Pvt. Ltd. Unit 2

IS 3735 (1996)

Canvas Shoes, Rubber Sole

All

18800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4.5 Consolidation Test IS 3400 (Part 5) : 1986 (From the quarter, cut a strip of 25.0 ± 0.5 mm width along the leagth of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30N (3.0 kgf) for each of the teat piecea (see Note under 4.4).')	-	500	10 % discount to BIS.
4.1.1 Upper, Sl No. (i) of Table 1(The upper shall consist of over layer of cotton, manmade or blended conforming' to the requirements given in Sl No. (i) of Table 1 as an overlayer and cotton drill conforming to the requirements given in Sl No. (ii) of Table 1, as an inner layer or lining. The two fabrics shall be firmly adhered together with rubber compound. )	-	100	10 % discount to BIS.
Cl.4.1.1.1 Colour fastness(The dyed fabrics prescribed in 4.1.1 shall be fast todaylight and mechanical washing. Fastness to daylight shall be of rating 4 or better, when tested in accordance with IS 686 : 1985 or IS 2454: 1985. However in case of dispute the method prescribed in IS 686 : 1985 shall be considered as referee method.)	-	1500	10 % discount to BIS.
Cl.4.1.2 Binding Material(IS 1954 : 1990) (IS1969 : 1985)(Cotton tape NEWAR used as binding material shall conform to the requirements prescribed in col 3 of Table 2, when tested in accordance with the methods referred to in col 4 of the table.)	-	1500	10 % discount to BIS.
Cl.4.1.2.1 Anmex B.(Cotton, manmade or blended shall be used as binding material.' 'Coloured cotton tapes shall have fastness to day light of rating as and if agreed to between the purchaser and the supplier when tested in accordance with IS 686 : 1985. The black tapes shall be free from sulphur dyes when tested in accordance with Annex B.')	-	500	10 % discount to BIS.
Cl.4.1.3.1( Sewing thread cotton, manmade or blended shall be used for stitching of upper. For cotton variety thread shall conform to variety No. 28 of IS 1720. Polyester variety thread shall conform to variety No. 9 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification. Sewing thread cotton, manmade or blended shall be used for binding of upper. For cotton variety thread shall conform to variety No. 32 of IS 1720. Polyester variety thread shall conform to variety No. 5 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification.')	-	100	10 % discount to BIS.
Cl.4.1.3.2 (IS 2454 : 1985) IS 765 : 1979 IS 971 : 1966( The colour of the threads shall be as agreedto between the purchaser and the supplier. The dyed threads shall conform to the following requirements or IS 686 : 1985'.)	-	1500	10 % discount to BIS.
Cl.4.1.4(.Brass, steel or aluminium eyelets of 7.5 mm diameter and wall thickness 0.30 to 0.35 mm shall be used.')	-	100	10 % discount to BIS.
Cl.4.1.5 Laces( The shoes shall be provided with fabric braided laces either matching the shade of the upper or black or The length of the lace shall be 60 ± 3 cm )	-	100	10 % discount to BIS.
Cl.4.1.5 Laces(and shallhave the breaking strength of not less than 250 N when tested between 18 cm grips in accordance with IS 1969 : 1985, the rate of traverse of power actuated grip being 300 mm/min.)	-	100	10 % discount to BIS.
Cl.4.1.5 Laces Annex B(In case the laces are black, the same shall pass the test for freedom from sulpher dyes when tested in accordance with Annex B. The two ends of the lace shall be provided with suitable metal or plastic tips.)	-	500	10 % discount to BIS.
Cl.4.1.6 Rubber Components(The rubber components shall conform to the requirements given in Table 4, when tested from finished boots.However in case it is not possible to cut the test pieces from the made up boots then 4.1.5.3 of IS 13695 : 1993 shall be followed.')	-	100	10 % discount to BIS.
Cl.4.1.6.2 Ageing col 4 of Table 5.(The shoes shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the shoes shall conform to the physical requirements prescribed in col 4 of Table 5. )	-	500	-
Cl.4.1.6.2 Ageing (None of the rubber components of the shoes shall show any sign of tackiness or crack developed after ageing, when examined visually)	-	100	10 % discount to BIS.
Cl.4.1.6.3 Thickness of components in Table 6.(Individual components of the shoes shall comply with the thickness and material requirements prescribed in Table 6.)	-	100	10 % discount to BIS.
CL.4.2 Shape and Design IS 1638 : 1969(Cl 4.2.1 The shoes shall be made according to design and pattern as agreed to between the purchaser and the supplier. Size and fittings of the shoes shall be in accordance with IS 1638 : 1969 unless otherwise specified by the purchaser.)	-	100	10 % discount to BIS.
Cl.4.2.2( The recommended design of canvas shoes is shown in Fig. 1.)	-	100	10 % discount to BIS.
Cl.4.3 Construction Cl 4.3.1( The upper shall be stitched on a lock stitch machine and the number of stitches shall be 30 to 40 per dm.)	-	100	10 % discount to BIS.
Cl.'4.3.2( Back of the upper shall be reinforced with a strip of upper material when there is a seam.')	-	100	10 % discount to BIS.
Cl.4.3.3( The counter shall be stitched at the back, set from bottom of lining and bound flat on top edge with white/scoured binding material cut in bias and formed as a tape. T )	-	100	10 % discount to BIS.
Cl.4.3.3(he number of stitches shall be 30 to 40 per decimetre. The counter binding shall meet the binding of the upper at the centre top edge of the heel.)	-	100	10 % discount to BIS.
Cl.4.3.3(The edges of quarter shall be bound with dyed cotton binding material or matching to the colour of the upper, cut in bias and formed as a tape.)	-	100	10 % discount to BIS.
Cl.4.3.4 (The vantp shall be strengthened with a rubber toe-cap (see Fig. 1).)	-	100	10 % discount to BIS.
Cl.4.3.5( Five pairs of eyelets shall be fitted in each shoe. The eyelets shall be properly clenched without any distortion. It shall properly match the colour of the upper canvas, or as agreed to between the purchaser and the supplier.)	-	100	10 % discount to BIS.
Cl.4.3.6( The shoes shall be free from folds, wrinkles in the upper, blisters, embedded foreign matters and excessive surface markings. In appearance, general workmanship, finish and all other respects, not defined in the standard, the shoes shall be similar to the sample approved by the purchaser, if any)	-	100	10 % discount to BIS.
CL.4.3.7( The soles shall be of even substance and ofone layer only.)	-	100	10 % discount to BIS.
Cl.4.3.8( A rubber foxing shall be fixed all round the sole and heel. The colour shall be as agreed to between the purchaser and the supplier. )	-	100	10 % discount to BIS.
Cl.4.3.8(The foxing, not less than 18 mm wide, shall not extend beyond the edges of the sole at the bottom)	-	100	10 % discount to BIS.
Cl.4.4 Adhesion Test(From the upper-foxing portion where it is adhered to the canvas, parallel to the waist of sole, cut a strip of length 100 mm and width 8 mm. Separate out the plies initially by breaking the bond to a length of about 75 mm. Carry out the test on two specimens in accordance with IS 3400 (Part 5) : 1986. There shall be no further separation within 1 minute at a load of 1 kg for each of the two specimens.)	-	500	10 % discount to BIS.
CL.4.6 Mass(The mass of one pair of finished shoes of size 8 shall not exceed 750 g with an increase or decrease of 25 g for each bigger or smaller size respectively)	-	100	10 % discount to BIS.
Cl.4.5 Consolidation Test IS 3400 (Part 5) : 1986 (From the quarter, cut a strip of 25.0 ± 0.5 mm width along the leagth of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30N (3.0 kgf) for each of the teat piecea (see Note under 4.4).')	-	500	10 % discount to BIS.
4.8(Adhesion )	-	500	10 % discount to BIS.
4.7(Consolidation test )	-	500	10 % discount to BIS.
4.6(Mass )	-	100	10 % discount to BIS.
4.5(Finish )	-	100	10 % discount to BIS.
4.4(Contruction )	-	100	10 % discount to BIS.
4.3(Leg Height )	-	100	10 % discount to BIS.
4.2(Design )	-	100	10 % discount to BIS.
4.1.6.2(Thickness of components )	-	100	10 % discount to BIS.
4.1.6.2(Ageing)	-	500	10 % discount to BIS.
4.1.6.2(Elongation at break after ageing )	-	100	10 % discount to BIS.
4.1.6(Tensile strength)	-	400	10 % discount to BIS.
4.1.6(Hardness (after accelerated ))	-	500	10 % discount to BIS.
4.1.6(Flexing resistance test)	-	1200	10 % discount to BIS.
4.1.6(Hardness )	-	500	10 % discount to BIS.
4.1.6(Relative density)	-	500	10 % discount to BIS.
4.1.5(Sulpher dyes content )	-	500	10 % discount to BIS.
4.1.5(Breaking Load )	-	500	10 % discount to BIS.
4.1.5(Length )	-	100	10 % discount to BIS.
4.1.4(Thickness)	-	100	10 % discount to BIS.
4.1.4(Size )	-	100	10 % discount to BIS.
4.1.3(Color fastness to perspiration)	-	1500	10 % discount to BIS.
4.1.3(Colorfastness to washing)	-	1500	10 % discount to BIS.
4.1.3(Colorfastness to light )	-	1500	10 % discount to BIS.
4.1.3(Single thread breaking load)	-	200	10 % discount to BIS.
4.1.3(Construction )	-	100	10 % discount to BIS.
4.1.2(Colorfastness to light )	-	1500	10 % discount to BIS.
4.1.2(Colorfastness to washing)	-	1500	10 % discount to BIS.
4.1.2(Breaking Strength )	-	500	10 % discount to BIS.
4.1.2(Width )	-	100	10 % discount to BIS.
4.1.1.2(Colorfastness to washing)	-	1500	10 % discount to BIS.
4.1.1.1(Colorfastness to light )	-	1500	10 % discount to BIS.
4.1.1 (Drill) (End & Picks/dm)	-	200	10 % discount to BIS.
4.1.1 (Drill) (Colorfastness to light )	-	1500	10 % discount to BIS.
4.1.1 (canvas )(End & Picks/dm)	-	200	10 % discount to BIS.
4.1.1 (canvas )(Breaking Load )	-	500	10 % discount to BIS.
5, 5.1, Cl. 5.2, Cl. 5.2.1, Cl. 5.2.1.1(Packing and marking)	-	100	10 % discount to BIS.
" CL. 5.1, Cl. 5.2, Cl. 5.2.1, Cl. 5.2.1.1(Packing and marking ")	-	100	10 % discount to BIS.

05 Apr, 2027

-
Included w.e.f. 02.12.2022

7791

Conformity Testing Labs Pvt. Ltd. Unit 2

IS 3736 (1995)

Canvas boots, rubber sole - Specification (Second Revision)

ALL

23800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4.1.7.4 Ageing(The boots shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the soles and heels of the boots shall conform to the physical requirements prescribed in Table 5. i) Tensile Length)	-	700	10 % discount to BIS.
Cl.4.1.7.4 Ageing(ii) Elongation at break)	-	700	10 % discount to BIS.
Cl.4.1.7.2 IS 3400 (Part 2) : 1980(2)Hardness, IRHD)	-	500	10 % discount to BIS.
4.1.6 Fabric Laces Cl.4.1.6.1( The boots shall be provided with braided of cotton or man made or blended fabric laces 115 ± 5 cm in length, matching the colour of the upper. )	-	300	10 % discount to BIS.
Cl.4.1.1 upper IS 1969(d) Picks/dm)	-	200	10 % discount to BIS.
Cl.4.4.5 ( Table 1.)(d) Picks/dm)	-	200	10 % discount to BIS.
4.1.2 Lining Material(195 ± 5 picks/dm shall be used.)	-	200	10 % discount to BIS.
Cl.4.1.1 upper IS 1969(c) Ends/dm )	-	200	10 % discount to BIS.
Cl.4.4.5 ( Table 1.)(c) Ends/dm )	-	200	10 % discount to BIS.
4.1.2 Lining Material(having 390 ± 10 ends/dm and )	-	200	10 % discount to BIS.
Cl.4.1.7.2 IS 3400 (Part 4) : 1987 IS 3400 (Part 2) : 1980(Change in initial hardness after accelerated ageing for 24 h at l00 ± 1°C)	-	500	10 % discount to BIS.
Cl.4.8 Adhesion Test(From the upper foxing portion where it is adhered to the canvas cut a strip of 8.0 ± 0.5 mm width along with the length of the sole at the waist portion and of sufficient lengh to permit separation over a length of at least 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100 ± 10 mm per minute in accordance with IS 3400 (Part 5):1986 or the Static Dead Load Method as given in Annex C. The individual adhesion value noted/recorded shall not be less than 8 N (0.8 kgf) for each of the test pieces ( see Note under 4.7 ).')	-	500	10 % discount to BIS.
Cl.4.4.9(From the upper of made up footwear representative sample of width 25 ± 0.5 mm width strip is to be cut along the length of the boot of enough length so as to make it convenient to allow a distance of minimum 30 mm between the jaws of the tensile machine)	-	200	10 % discount to BIS.
Cl.4.1.7.2 IS 3400 (Part 1) : 1987(Tensile strength in MPa, Min)	-	500	10 % discount to BIS.
Cl.4.1.3 Binding Material IS 1954:1990(Cotton tape NEWAR used as binding material shall conform to the requirements as mentioned in Table 2, when tested in accordance with the methods referred to in col 4 of Table 2. 1)Width, mm. Min )	-	500	10 % discount to BIS.
Cl.4.4.3(The top, side and front edges of the quarters and tongue shall be bound with cotton tape NEWAR of not less than 13 mm width using variety No. 29 thread.)	-	100	10 % discount to BIS.
Cl.4.1.7.3 IS 3400 (Part 10) : 1977(Compression set, in percent. Max)	-	500	10 % discount to BIS.
Cl.4.4.4( The back of the quarter shall be reinforced with a strip, not less than 25 mm wide,of either upper material or canvas. In case of composite upper material the edges of the strip shall be bound by cotton tape ( NEWAR ). When canvas cloth is used the edges shall be folded and shall be stitched with two rows of stitching.)	-	100	10 % discount to BIS.
Cl.4.7 Consolidation Test(From the quarter, cut a strip of 25.0 ± 0. 5 mm width along the length of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100 ± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30 N (3.0 kgf) for each of the test pieces)	-	500	10 % discount to BIS.
Cl.4.1.7.2 IS 3400 (Part 1) : 1987(Elongation at break, in percent, Min)	-	500	10 % discount to BIS.
IS 1969:1985(Breaking load on 50 cm test length. N, Min)	-	500	10 % discount to BIS.
4.1.6 Fabric Laces Cl.4.1.6.1(The laces shall have a minimum breaking load of 450 N, when tested between 18 cm grips, the rate of traverse of power actuated grip being 30 cm/min.)	-	100	10 % discount to BIS.
Cl.4.1.7.2 IS 3400 (Part 16) : 1974(iii)Flexing resistance, number of cycles b)Cut growth at the end of 150 000 cycles, Percent, Max)	-	1200	10 % discount to BIS.
Cl.4.4.5 ( Table 1.)(b) Weft )	-	500	10 % discount to BIS.
Cl.4.4.5 ( Table 1.)( in case of half bellow. Thefull bellow tongue shall be made out of canvas cloth as prescribed in Sl No. (i) of Table 1. Breaking load in N, Min a) Warp )	-	100	10 % discount to BIS.
Cl.4.1.1 upper IS 1969(b)Weft)	-	500	10 % discount to BIS.
Cl.4.1.1 upper IS 1969(Breaking load in N.Min (5 × 20 cm grip): a) Wrap)	-	500	10 % discount to BIS.
Cl.4.1.7.2 IS 3400 (Part 16) : 1974(iii)Flexing resistance, number of cycles a)Initial crack, Min)	-	1200	10 % discount to BIS.
4.1.2 Lining Material( 200 N Minin weft way (when tested in accordance with IS 1969 : 1985) )	-	500	10 % discount to BIS.
4.1.2 Lining Material(For covering of the insole, cotton drill conforming to Table 1, Sl No. (ii) shall be used. For detachable insole, bleached cotton twill of breaking load 390 N Min in warp way and)	-	200	10 % discount to BIS.
Cl.4.1.1 upper(The upper shall consist of Rip Stop Fabric of cotton or manmade or its blend being the over layer and cotton drill as an inner layer and shall conform to the requirements given at Sl No. (i) of Table 1. Sr.no 1.Overlayer Construction )	-	100	10 % discount to BIS.
4.1.1.1 Colour fastness(The dyed fabrics prescribed in 4.1.1 shall be fast to daylight and mechanical washing. Fastness to daylight shall be of rating 4 or better, when tested in accordance with IS 686 : 1985 or IS 2454 : 1985.)	-	1500	10 % discount to BIS.
Cl.4.1.1.2( Fastness to mechanical washing (mild) shall be of rating 4 or better, when tested in accordance with IS 764 : 1979)	-	1500	10 % discount to BIS.
Cl.4.1.3.3( Black tapes shall be free from sulphur dyes when tested in accordance with Annex B.)	-	700	10 % discount to BIS.
Cl.4.1.4 Reinforcement Material(The back seam, joining two quarters at the back of the heel shall be reinforced with a not less than 25 mm wide tape made out of material conforming to Sl No. (i) of Table 1)	-	100	10 % discount to BIS.
Cl.4.1.5 Thread for Upper Closing Cl.4.1.5.1 (IS 1670:1991)(Sewing thread cotton, man made or blended shall be used for stitching of upper. For cotton variety thread shall conform to variety No. 28 of IS 1720. Polyester variety thread shall conform to variety No. 9 of IS 9543. Any other blend of thread would have breaking load not less than above referred requirements. Sewing thread cotton, manmade or blended shall be used for binding of upper. For cotton variety thread shall conform to variety No. 32 of IS 1720. Polyester variety thread shall conform to variety No. 5 of IS 9543. Any other blend of thread would have breaking load not less than above referred requirement of specification.')	-	2000	10 % discount to BIS.
Cl.4.1.5.2( The colour of the threads shall be asagreed to between the purchaser and the supplier. The dyed threads shall conform to the following requirements)	-	500	10 % discount to BIS.
4.1.6 Fabric Laces Cl.4.1.6.1(The two ends of the lace shall be provided with suitable metal or plastic tips. Black laces shall be free from sulphur dyes when tested in accordance with Annex B.)	-	200	10 % discount to BIS.
Cl.4.1.7 Rubber Components Cl.4.1.7.1( the soles and heels shall conform to Type 2 of IS 5676:1995.)	-	200	10 % discount to BIS.
Cl.4.1.7.2 IS 3400 (Part 9) : 1978( The rubber components shall conform to Table 4 when tested.' ( Page 3, Table 4, Note 1) — 'However in case it is not possible then 4.2.5.3 of IS 13695:1993 shall be followed. 1)Relative density, Max)	-	500	10 % discount to BIS.
Cl.4.1.7.5 Thickness of components(Individual components of the boots shall comply with the thickness and material requirements prescribed in Table 6.)	-	500	10 % discount to BIS.
Cl.4.3 Leg Height(The leg height of the boots for size 8 shall be 160 ± 2 mm with an increase or decrease of 4 mm of the nominal height for each bigger or smaller sizes respectively when measured at the inside from the back of the boot from insole to the top.)	-	100	10 % discount to BIS.
Cl.4.4.2( The canvas upper shall be lined with bleached drill cloth.)	-	100	10 % discount to BIS.
Cl.4.4.3( The upper shall be stitched on a lockstitch machine, with 30 to 40 stitches per decimetre by thread of variety No. 8 and variety No. 29 cotton sewing thread conforming to 4.1.5 using variety No. 29 for taping and binding and variety No. 8 for remaining seams. )	-	100	10 % discount to BIS.
Cl.4.4.5 ( The tongue shall be either half or full bellow depending on the requirement of the purchaser andshall be made from composite material prescribed for the upper in 4.1.1.)	-	100	10 % discount to BIS.
Cl.4.4.6( A minimum of seven aluminium, brass or steel eyelets having 10 mm diameter and wall thickness 0.30 to 0.35 mm shall be fitted in each face.')	-	200	10 % discount to BIS.
Cl.4.4.7( The toe shall be reinforced with a toe puff cemented inside and outside with rubber toe cap. The heel piece (counter) or stiffener shall be set from the bottom of the lining and bound flat on the top edge with white cloth for binding of countertop edge with white clothfor binding of counter)	-	100	10 % discount to BIS.
Cl.4.4.8( A strengthening rubber arch piece shall be firmly pasted and stitched at the middle arch of the inside quarter. Another strengthening rubber piece, circular in shape 35 ± 1 mm in diameter, may bepasted and stitched at the centre of the inside)	-	100	10 % discount to BIS.
Cl.4.4.10( A 25 mm Min wide and 2 mm Min thick rubber golosh in serrated, diamond or any otherdesign, as agreed to between the purchaser and thesupplier, shall be fitted all round the sole edge of the boot. The golosh shall not extend below the edge of the sole.)	-	100	10 % discount to BIS.
Cl.4.5.1(Cl.4.1.6.)( Each pair of boot shall be provided with a pair of braided fabric laces of the quality as prescribed in 4.1.6.)	-	100	10 % discount to BIS.
Cl.4.5.2( In appearance, general workmanship, finish and in all other respects, not defined in this standard, the boot shall be similar to those of the sample approved by the purchaser, if any.)	-	100	10 % discount to BIS.
Cl.4.6 Mass(The mass of finished boots, rubber sole, of size 8 shall not exceed 1130 g per pair, and the mass shall increase or decrease by 75 g per pair for each bigger or smaller size respectively.)	-	100	10 % discount to BIS.
Cl.4.9 Composite Breaking Strength Test( From the upper of made up footwear representative sample of width 25 ± 0.5 mm width strip is to be cut along the length of the boot of enough length so as to make it convenient to allow a distance of minimum 30 mm between the jaws of the tensile machine.Rate of traverse of pulling jaw shall be 100 ± 5 mm per minute. Two such test pieces will be required to be obtained from the made up footwear and will be subjected to test to break each test piece. Mean value of each set of test pieces comprising of length wise and height wise test pieces will be 1 000 N/25 mm width minimum.')	-	500	10 % discount to BIS.
Cl.4.1.7.4 Ageing(ii) Elongation at break)	-	700	10 % discount to BIS.
Cl.4.1.7.2 IS 3400 (Part 16) : 1974(iii)Flexing resistance, number of cycles b)Cut growth at the end of 150 000 cycles, Percent, Max)	-	1500	10 % discount to BIS.
Cl.4.9 Composite Breaking Strength Test( From the upper of made up footwear representative sample of width 25 ± 0.5 mm width strip is to be cut along the length of the boot of enough length so as to make it convenient to allow a distance of minimum 30 mm between the jaws of the tensile machine.Rate of traverse of pulling jaw shall be 100 ± 5 mm per minute. Two such test pieces will be required to be obtained from the made up footwear and will be subjected to test to break each test piece. Mean value of each set of test pieces comprising of length wise and height wise test pieces will be 1 000 N/25 mm width minimum.')	-	500	10 % discount to BIS.

05 Apr, 2027

-
Included w.e.f. 02.12.2022

7792

KC INDIA TEST LABORATORIES LLP

IS 3854 (1997)

Switches for domestic and similar purposes - Specification (Second Revision)

Upto 16A

11850 View breakup
Rs.8800 for 6 A screw type; Rs.7350 for 6 A screwless type; Rs.8800/- for 10 A screw type; Rs.8800 for 10 A screwless type; Rs.9600/- for 16 screw type. Rs.11850/- for 16 screwless type.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Rating)	-	150	20% Discount for BIS
7(Classification)	-	150	20% Discount for BIS
8(Marking)	-	150	20% Discount for BIS
10(Protection against Electric Shock)	-	300	20% Discount for BIS
11.1(Provision for earthing)	-	300	20% Discount for BIS
11.2(Provision for earthing)	-	300	20% Discount for BIS
11.3(Provision for earthing)	-	300	20% Discount for BIS
11.4(Provision for earthing)	-	300	20% Discount for BIS
12.2(Terminals)	-	1000	20% Discount for BIS
12.3(Terminals)	-	1500	20% Discount for BIS
13(Constructional requirements )	-	800	20% Discount for BIS
14(Mechanism [Cl. 14])	-	350	20% Discount for BIS
15.1(Resistance to Ageing, to Harmful Ingress of water and to Humidity [Cl. 15]: Resistance to Ageing, [Cl. 15.1])	-	500	20% Discount for BIS
15.2(b)Resistance to Harmful ingress of water [Cl. 15.2])	-	500	20% Discount for BIS
15.3(c) Resistance to Humidity [Cl. 15.3])	-	500	20% Discount for BIS
16(Insulation resistance and electric strength )	-	600	20% Discount for BIS
17(Temperature- rise [Cl. 17])	-	800	20% Discount for BIS
18(Marking and breaking Capacity[Cl. 18])	-	1500	20% Discount for BIS
19(Normal Operation [Cl. 19] a) General & Operation)	-	3000	20% Discount for BIS
20(Mechanical Strength Test [Cl. 20])	-	300	20% Discount for BIS
21(Resistance to Heat [Cl.21])	-	500	20% Discount for BIS
22(Screw, Current Carrying Part And Connection [Cl.22])	-	350	20% Discount for BIS
23(Creepage distances, clearances and distance through sealing compound [Cl.23])	-	350	20% Discount for BIS
24.1.1(Resistance to Abnormal Heat & Fire [Cl.24.1] [Glow Wire Test] [Cl.24.1.1])	-	400	20% Discount for BIS
24.2(Resistance to tracking [For Switch other than ordinary] [Cl.24.2])	-	400	20% Discount for BIS
25 of IS 3854 : 1997(Resistance to rusting)	-	350	20% Discount for BIS
6(Rating)	-	150	20% Discount for BIS
7(Classification)	-	150	20% Discount for BIS
8(Marking)	-	150	20% Discount for BIS
10(Protection against Electric Shock)	-	300	20% Discount for BIS
11.1(Provision for earthing)	-	300	20% Discount for BIS
11.2(Provision for earthing)	-	300	20% Discount for BIS
11.3(Provision for earthing)	-	300	20% Discount for BIS
11.4(Provision for earthing)	-	300	20% Discount for BIS
12.2(Terminals)	-	1000	20% Discount for BIS
12.3(Terminals)	-	1500	20% Discount for BIS
13(Constructional requirements )	-	800	20% Discount for BIS
14(Mechanism [Cl. 14])	-	350	20% Discount for BIS
15.1(Resistance to Ageing, to Harmful Ingress of water and to Humidity [Cl. 15]: Resistance to Ageing, [Cl. 15.1])	-	500	20% Discount for BIS
15.2(b)Resistance to Harmful ingress of water [Cl. 15.2])	-	500	20% Discount for BIS
15.3(c) Resistance to Humidity [Cl. 15.3])	-	500	20% Discount for BIS
16(Insulation resistance and electric strength )	-	600	20% Discount for BIS
17(Temperature- rise [Cl. 17])	-	800	20% Discount for BIS
18(Marking and breaking Capacity[Cl. 18])	-	1500	20% Discount for BIS
19(Normal Operation [Cl. 19] a) General & Operation)	-	3000	20% Discount for BIS
20(Mechanical Strength Test [Cl. 20])	-	300	20% Discount for BIS
21(Resistance to Heat [Cl.21])	-	500	20% Discount for BIS
22(Screw, Current Carrying Part And Connection [Cl.22])	-	350	20% Discount for BIS
23(Creepage distances, clearances and distance through sealing compound [Cl.23])	-	350	20% Discount for BIS
24.1.1(Resistance to Abnormal Heat & Fire [Cl.24.1] [Glow Wire Test] [Cl.24.1.1])	-	400	20% Discount for BIS
24.2(Resistance to tracking [For Switch other than ordinary] [Cl.24.2])	-	400	20% Discount for BIS
25 of IS 3854 : 1997(Resistance to rusting)	-	350	20% Discount for BIS

06 Jun, 2027

-
-

7793

Conformity Testing Labs Pvt. Ltd. Unit 2

IS 6721 (1972)

Specification for PVC sandal

ALL

3200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.4(Dimension)	-	100	10 % discount to BIS.
4.0(Lead Content )	-	500	10 % discount to BIS.
4.0(Volatility % by mass)	-	500	10 % discount to BIS.
4.0(Tear strength )	-	500	10 % discount to BIS.
4.0(Elongation at break )	-	100	10 % discount to BIS.
4.0(Tensile Strength )	-	400	10 % discount to BIS.
4.0(Hardness (IRHD))	-	500	10 % discount to BIS.
4.0(Density )	-	500	10 % discount to BIS.
4.2(Design)	-	100	10 % discount to BIS.
6(Marking)	-	100	10 % discount to BIS.
4.4(Dimension)	-	100	10 % discount to BIS.
4.0(Lead Content )	-	500	10 % discount to BIS.
4.0(Volatility % by mass)	-	500	10 % discount to BIS.
4.0(Tear strength )	-	500	10 % discount to BIS.
4.0(Elongation at break )	-	100	10 % discount to BIS.
4.0(Tensile Strength )	-	400	10 % discount to BIS.
4.0(Hardness (IRHD))	-	500	10 % discount to BIS.
4.0(Density )	-	500	10 % discount to BIS.
4.2(Design)	-	100	10 % discount to BIS.
6(Marking)	-	100	10 % discount to BIS.
4.4(Dimension)	-	100	10 % discount to BIS.
4.0(Lead Content )	-	500	10 % discount to BIS.
4.0(Volatility % by mass)	-	500	10 % discount to BIS.
4.0(Tear strength )	-	500	10 % discount to BIS.
4.0(Elongation at break )	-	100	10 % discount to BIS.
4.0(Tensile Strength )	-	400	10 % discount to BIS.
4.0(Hardness (IRHD))	-	500	10 % discount to BIS.
4.0(Density )	-	500	10 % discount to BIS.
4.2(Design)	-	100	10 % discount to BIS.
6(Marking)	-	100	10 % discount to BIS.
"3.5(size and thickness of soles &heels)	-	100	10 % discount to BIS.
4.2(Design)	-	100	10 % discount to BIS.
6(Marking)	-	100	10 % discount to BIS.

05 Apr, 2027

-
Included w.e.f. 02.12.2022

7794

Conformity Testing Labs Pvt. Ltd. Unit 2

IS 10702 (1992)

Rubber hawal chappal - Specification (Second Revision)

ALL

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4(Stud bolt)	-	100	10 % discount to BIS
5.4(Stud diameter)	-	100	10 % discount to BIS
5.4(Tear strength )	-	500	10 % discount to BIS
5.4(Hardness (shore A)- after ageing)	-	500	10 % discount to BIS
5.4(Hardness (Shore A))	-	300	10 % discount to BIS
5.4(Breaking strength )	-	400	10 % discount to BIS
5.4(Elongation at break )	-	100	10 % discount to BIS
5.4(Tensile Strength )	-	500	10 % discount to BIS
5.4(Relative density )	-	500	10 % discount to BIS
5.4(Shrinkage test (at 100 C temp))	-	500	10 % discount to BIS
5.4(Shrinkage test (at room temp))	-	500	10 % discount to BIS
5.4(Split tear strength )	-	500	10 % discount to BIS
5.4(Compression set)	-	500	10 % discount to BIS
5.4(Hardness (Shore A))	-	300	10 % discount to BIS
5.4(Relative density)	-	500	10 % discount to BIS
5.3(Thickness )	-	100	10 % discount to BIS
5.1(Shape & Design)	-	100	10 % discount to BIS
6, 6.1, 6.2(Marking and packing)	-	100	10 % discount to BIS

05 Apr, 2027

-
Included w.e.f. 02.12.2022

7795

Conformity Testing Labs Pvt. Ltd. Unit 2

IS 15844 (2010)

Sports Footwear Specification

ALL

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.11(Corrosion resistance)	-	500	10 % discount to BIS.
3.10(Ross Flex test)	-	500	10 % discount to BIS.
3.10(Shape retention percent )	-	200	10 % discount to BIS.
3.10(Collapsing load )	-	200	10 % discount to BIS.
3.10(Crush load )	-	500	10 % discount to BIS.
3.9(Lace abrasion test)	-	500	10 % discount to BIS.
3.9(Griping Strength of Tags)	-	500	10 % discount to BIS.
3.9(Colour migration / Colour fastness)	-	500	10 % discount to BIS.
3.9(Breaking Strength )	-	500	10 % discount to BIS.
3.8(Heat resistance tester )	-	500	10 % discount to BIS.
3.8(Compression set )	-	500	10 % discount to BIS.
3.8(Die-C tear Strength )	-	500	10 % discount to BIS.
3.8(Elongation at Break )	-	100	10 % discount to BIS.
3.8(Tensile Strength)	-	400	10 % discount to BIS.
3.7(Flexing index)	-	500	10 % discount to BIS.
3.7(Abrasion resistance )	-	500	10 % discount to BIS.
3.7(Water absorption & loss percent )	-	500	10 % discount to BIS.
3.7(Tensile Strength)	-	500	10 % discount to BIS.
3.6(Ross flexing )	-	1200	10 % discount to BIS.
3.6(Adhesion to mid sole )	-	500	10 % discount to BIS.
3.6(Abrasion resistance )	-	1200	10 % discount to BIS.
3.6(Die-C tear Strength )	-	500	10 % discount to BIS.
3.6(Trouser tear strength )	-	500	10 % discount to BIS.
3.5(Heat resistance tester )	-	500	10 % discount to BIS.
3.5(Adhesive to sole)	-	500	10 % discount to BIS.
3.5(Compression set )	-	500	10 % discount to BIS.
3.5(Die-C tear Strength )	-	500	10 % discount to BIS.
3.5(Split tear strength )	-	500	10 % discount to BIS.
3.5(Elongation at Break )	-	100	10 % discount to BIS.
3.5(Tensile Strength)	-	400	10 % discount to BIS.
3.4(Colorfastness to light )	-	1500	10 % discount to BIS.
3.4(Colour fastness to crocking )	-	500	10 % discount to BIS.
3.4(Tear Strength)	-	500	10 % discount to BIS.
3.4(Elongation at Break )	-	100	10 % discount to BIS.
3.4(Tensile Strength)	-	400	10 % discount to BIS.
3.4(Adhesive Strength )	-	500	10 % discount to BIS.
3.4(Hydrolysis )	-	700	10 % discount to BIS.
3.4(Upper flexing resistance )	-	500	10 % discount to BIS.
3.3.4(Energy absorption of seat region )	-	500	10 % discount to BIS.
3.3.3(Sole /midsole bond strength )	-	500	10 % discount to BIS.
3.3.2(Upper/outsole bond strength)	-	500	10 % discount to BIS.
3.3.1(Contruction)	-	50	10 % discount to BIS.
3.2.3 & 3.2.4(Visual )	-	50	10 % discount to BIS.
3.2.1(Design )	-	50	10 % discount to BIS.
Cl. 3.6,Table 7,IS 3400(Part 17), iv)(Tear strength, kg/cm, Min)	-	200	10 % discount to BIS.
Cl. 3.7 Table 10, Outsole Materials — Thermo Plastic Urethane (TPU) IS 3400 (Part 1) i)(Tensile strength)	-	500	10 % discount to BIS.
CL. 3.8 Table 12, Insole Material: Stoble Non-woven, Annex G i)(Trouser tear strength, kg, Min)	-	500	10 % discount to BIS.
CL. 3.8 Table 12, Cl. 6.12 IS 15298 (part1) ii)(Abrasion resistance, cycles, Min)	-	1000	10 % discount to BIS.
Cl. 3.8, Table 12, Annex F, iv)(Heat resistance, shrinkage linear, percent, Max)	-	500	10 % discount to BIS.
Cl. 3.11 Table 16 A-3.4 of IS 7554 ii)(Resilience, percent, Min)	-	200	10 % discount to BIS.
Cl. 3.11 Table 16 A-3.5 of IS 7554 iii)(Moisture resistance, percent, Min)	-	200	10 % discount to BIS.
Cl. 3.11 Table 16 iv) a)A-3.1 of IS 7554(Initial dry area shape retention, percent, Min)	-	200	10 % discount to BIS.
Cl. 3.11 Table 16 iv) b) A-3.3 of IS 7554(Area shape retention after 10th collapse, dry, percent, Min)	-	200	10 % discount to BIS.
Cl. 3.11 Table 16,\ Annex B of IS 7554 v)(Peel strength, N/cm, Min)	-	500	10 % discount to BIS.
Cl. 3.4,Table 3(Lastometer test, mm, Min)	-	500	10 % discount to BIS.
Cl. 3.5,Table 6(Vamp and Quarter Liningi) Tear strength, N, Min a) Leather,b) Coated fabric and textile)	-	500	10 % discount to BIS.
Cl. 3.5 Table 6(Abrasion resistance, No. of cycles, Min,a) Dry – 25 600,b) Wet – 12 800)	-	1000	10 % discount to BIS.
Cl. 3.5 Table 6(Water vapour permeability, mg/(cm2.h), Min)	-	500	10 % discount to BIS.
Cl. 3.5,Table 6(Water vapour coefficient, mg/cm2, Min)	-	500	10 % discount to BIS.
Cl. 3.5,Table 6(pH value (for leather lining), Min)	-	500	10 % discount to BIS.
Cl. 3.5,Table 6(Chromium VI content (for leather lining), mg/kg, Max)	-	2000	10 % discount to BIS.
Cl. 3.6,Table 7(Tear strength, kg/cm, Min)	-	500	10 % discount to BIS.
Cl. 3.6,Table(Heat resistance, shrinkage linear, percent, Max)	-	500	10 % discount to BIS.
Cl. 3.7 Table 10(Outsole Materials — Thermo Plastic Urethane (TPU) i) Tensile strength)	-	500	10 % discount to BIS.
CL. 3.8 Table 12(Insole Material: Stoble Non-woven, Annex G i) Trouser tear strength, kg, Min)	-	500	10 % discount to BIS.
Cl. 3.8,Table 12(IS 3400 (Part 16) iii) Ross flexing, cycles, Min)	-	1200	10 % discount to BIS.
Cl. 3.8, Table 12 Annex F,(iv) Heat resistance, shrinkage linear, percent, Max)	-	500	10 % discount to BIS.
Cl. 3.11,Table 16(Counter Material: Thermoplastic, Solvent Activated and Heat Activated Sheets i) First dry collapsing load, hardness, N, Min)	-	200	10 % discount to BIS.
Cl. 3.11 Table 16(A-3.4 of IS 7554 ii) Resilience, percent, Min)	-	200	10 % discount to BIS.
Cl. 3.11 Table 16(A-3.5 of IS 7554 iii)Moisture resistance, percent, Min)	-	200	10 % discount to BIS.
Cl. 3.11 Table 16 ,iv)(a)A-3.1 of IS 7554 - Initial dry area shape retention, percent, Min b) A-3.3 of IS 7554 - Area shape retention after 10th collapse, dry, percent, Min)	-	200	10 % discount to BIS.
Cl. 3.11 Table 16,(Annex B of IS 7554 v) Peel strength, N/cm, Min)	-	500	10 % discount to BIS.

05 Apr, 2027

-
Included w.e.f. 02.12.2022

7796

NATIONAL TEST HOUSE(SOUTHERN REGION)

IS 2830 (2012)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purposes - Specification (Third Revision)

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Carbon %)	-	800	nil
6.1(Manganese %)	-	800	nil
6.1(Phosphorus %)	-	800	nil
6.1(Sulphur %)	-	800	nil
6.1( Copper %)	-	800	nil
6.1(Silicon %)	-	800	-

28 Nov, 2025

-
-

7797

LPG Equipment Research Centre (LERC)

IS 4246 (2002)

Domestic gas stoves for use with liquefied petroleum gases - Specification (Fifth Revision)

28320 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

-
-

7798

Central Power Research Institute (CPRI), Bangalore

IS 1180 : Part 1 (2014)

Outdoor Type Oil Immersed Distribution Transformers Upto and Including 2 500 kVA, 33kV - Specification Part 1 Mineral Oil Immersed (Fourth Revision)

274000 View breakup
Complete testing charges: Rs. 315100/- per transformer (up to 200 kVA without taps); Rs. 365010/- per transformer (up to 200 kVA with 7 taps); Rs. 365010/- per transformer ( above 200 kVA & up to 250 kVA with 7 taps); Rs. 405260/- per transformer (above 250 kVA & up to 500 kVA with 7 taps); Rs. 408840/- per transformer (1600 kVA & up to 2000 kVA with 7 taps excluding short circuit test); Rs. 443340/- per transformer (2000 kVA & up to 2500 kVA with 7 taps excluding short circuit test); Rs. 275260/- per transformer (500 kVA & up to 630 kVA with 17 taps excluding short circuit test); Rs. 284230/- per transformer (630 kVA & up to 1000 kVA with 17 taps excluding short circuit test); Rs. 399640/- per transformer (1000 kVA & up to 1600 kVA with 17 taps excluding short circuit test). Test charges will vary depending on the rating of the sample. The applicable test charges will be intimated through a proforma invoice.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
21.2 a)(Measurement of winding resistance )	-	5100	Test charges will vary depending on the kVA & Tappings of the Transformer Test charge applicable will be intimated through a proforma invoice
21.2 b)( Measurement of voltage ratio and check of phase displacemen)	-	3400	Test charges will vary depending on the kVA & Tappings of the Transformer Test charge applicable will be intimated through a proforma invoice
21.2 c)( Measurement of short-circuit impedance (principal tapping, when applicable) and load loss at 50 percent and 100 percent load)	-	10150	Test charges will vary depending on the kVA & Tappings of the Transformer Test charge applicable will be intimated through a proforma invoice
21.2 d)(Measurement of no-load loss and current)	-	10150	Test charges will vary depending on the kVA & Tappings of the Transformer Test charge applicable will be intimated through a proforma invoice
21.2 e)(Measurement of insulation resistance)	-	2550	Test charges will vary depending on the kVA & Tappings of the Transformer Test charge applicable will be intimated through a proforma invoice
21.2 f)(Induced over-voltage withstand test)	-	3200	Test charges will vary depending on the kVA & Tappings of the Transformer Test charge applicable will be intimated through a proforma invoice
21.2 g)( Separate-source voltage withstand test)	-	5200	Test charges will vary depending on the kVA & Tappings of the Transformer Test charge applicable will be intimated through a proforma invoice
21.3(b)(Temperature-rise test)	-	41600	Test charges will vary depending on the kVA & Tappings of the Transformer Test charge applicable will be intimated through a proforma invoice
21.3(c)(Short-circuit withstand test)	-	84450	Test charges will vary depending on the kVA & Tappings of the Transformer Test charge applicable will be intimated through a proforma invoice
21.4 c(No load current at 112.5 percent voltage.)	-	1700	Test charges will vary depending on the kVA & Tappings of the Transformer Test charge applicable will be intimated through a proforma invoice
21.5.1.1(Pressure test-Type test (For Transformers up to 200 kVA ))	-	11000	Test charges will vary depending on the kVA & Tappings of the Transformer Test charge applicable will be intimated through a proforma invoice
21.5.1.2(Pressure test-routine test (For Transformers up to 200 kVA ))	-	11000	Test charges will vary depending on the kVA & Tappings of the Transformer Test charge applicable will be intimated through a proforma invoice
21.5.2.1(Type test : For Transformers Above 200 kVA and Up to Including 2 500 kVA)	-	11000	Test charges will vary depending on the kVA & Tappings of the Transformer Test charge applicable will be intimated through a proforma invoice
21.5.2.2(routine test :For Transformers Above 200 kVA and Up to Including 2 500 kVA)	-	11000	Test charges will vary depending on the kVA & Tappings of the Transformer Test charge applicable will be intimated through a proforma invoice
21.5.2.3( Oil leakage test (routine test))	-	5500	Test charges will vary depending on the kVA & Tappings of the Transformer Test charge applicable will be intimated through a proforma invoice
21.5.3.3(Oil leakage test (routine test))	-	5500	Test charges will vary depending on the kVA & Tappings of the Transformer Test charge applicable will be intimated through a proforma invoice
21.5.3.1(For Single Phase Distribution Transformers Up to Including 25 kVA : pressure test (type test))	-	11000	Test charges will vary depending on the kVA & Tappings of the Transformer Test charge applicable will be intimated through a proforma invoice
21.5.3.2(For Single Phase Distribution Transformers Up to Including 25 kVA : pressure test (routine test))	-	11000	Test charges will vary depending on the kVA & Tappings of the Transformer Test charge applicable will be intimated through a proforma invoice
21.4 d(Paint adhesion tests)	-	2400	Test charges will vary depending on the kVA & Tappings of the Transformer Test charge applicable will be intimated through a proforma invoice
21.4 a)( Determination of sound levels)	-	28800	Test charges will vary depending on the kVA & Tappings of the Transformer Test charge applicable will be intimated through a proforma invoice
21.4 e(BDV and moisture content of oil in the transformer)	-	3000	Test charges will vary depending on the kVA & Tappings of the Transformer Test charge applicable will be intimated through a proforma invoice
21.3(a )(Lightning impulse test)	-	58300	Test charges will vary depending on the kVA & Tappings of the Transformer Test charge applicable will be intimated through a proforma invoice

31 Dec, 2026

-
-

7799

Sigma Test & Research Centre

IS 9873 : Part 3 (2017)

Safety of toys: Part 3 migration of certain elements (Second Revision)

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1 - Table 1(Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	4000	None
4.1 - Table 1(Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	4000	None
4.1 - Table 1(Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	4000	None
4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	4000	None
4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	4000	None
4.1 - Table 1(Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	4000	None
4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	4000	None
4.1 - Table 1(Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	4000	None

14 Dec, 2023

-
Deferred w.e.f. 30.07.2024 REVISED VERWION OF IS 9873 PT-3):2020 INCLUDED W.E.F. 20-07-2021.

7800

Sigma Test & Research Centre

IS 9873 : Part 2 (2017)

Safety of toys: Part 2 flammability (Third Revision)

2000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.2-5.2(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy-Duration of the flame after the removal of the test flame)	-	1000	None
4.2.2(a)-5.2(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was 150 mm or more)	-	1000	None
4.2.2(b)-5.2(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was less than 150 mm)	-	1000	None
4.2.3-5.3(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy-Duration of the flame after the removal of the test flame)	-	1000	None
4.2.3-5.3(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy- maximum distance between the upper edge of the burnt area and the point of application of the test flame)	-	1000	None
4.2.4-5.3(Toys to be worn on the head-Full or partial moulded head masks-Duration of the flame after the removal of the test flame)	-	1000	None
4.2.5-5.4(Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-rate of spread of flame)	-	1000	None
4.2.5-5.4(Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	1000	None
4.3-5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-rate of spread of flame)	-	1000	None
4.3-5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	1000	None
4.3(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play)	-	1000	None
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame)	-	1000	None
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	1000	None
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	1000	None
4.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	1000	None
4.5-5.5(Soft-filled toys-rate of spread of flame )	-	1000	None
4.5-5.5(Soft-filled toys-Test for soft-filled toys )	-	1000	None

14 Dec, 2023

-
Deferred w.e.f. 30.07.2024

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number

No Record Found