BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

10790 Results

S.No.

Lab Name

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

7741

Alpha Test House Services LLP

IS 277 (2018)

Galvanized steel strips and sheets (Plain And Corrugated) - Specification (Seventh Revision)

5210 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(phosphorus)	-	50	-
5.1(copper)	-	50	-
5.1(nitrogen)	-	700	-
5.1(aluminium)	-	50	-
5.1(manganese)	-	50	-
5.1(sulphur)	-	50	-
5.1(carbon)	-	50	-
5.1(Titanium)	-	50	-
5.1(micro alloy)	-	250	-
7.4(Mass of Coating: Single Spot Test)	-	350	-
7.4(Mass of Coating: Triple Spot Test)	-	350	-
7.1 & 10.2(Mass of Coating: Single Spot Test)	-	350	-
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	350	-
Cl. 17(Marking )	-	150	-
Cl. 14 & Cl. 15 (Cl. 14 & Cl 15 (Pitch of Corrugation))	-	50	-
Cl. 14 & Cl. 15 (Cl. 14 & Cl 15 (Depth of Corrugation))	-	50	-
Cl. 14 & Cl. 15 (Cl. 14 & Cl 15 (Number of Corrugation))	-	50	-
Cl. 14 & Cl. 15 (Cl. 14 & Cl 15 (Difference between Diagonal))	-	50	-
Cl. 14 & Cl. 15 (Cl. 14 & Cl. 15 (Thickness))	-	50	-
Cl. 14 (Cl. 14 & Cl 15 (Width))	-	50	-
Cl. 14 (Cl. 14 & Cl 15 (Length))	-	50	-
Cl.12(Freedom from defects)	-	50	-
Cl. 8.1 (Cl. 8.1 (Percentage Elongation ))	-	100	-
Cl. 8.1 (Cl. 8.1 (Yield Stress))	-	500	-
Cl. 8.1 (Cl. 8.1 (Tensile Strength))	-	500	-
cl 5.1, T-1, Note-6, For reinforced steel(P)	-	50	-
cl 5.1, T-1, Note-5, For Microalloying elements(Nb+V+Ti+B)	-	250	-
cl 5.1, T-1, Note-5, For Microalloying elements(B)	-	250	-
cl 5.1, T-1, Note-5, For Microalloying elements(Ti)	-	250	-
cl 5.1, T-1, Note-5, For Microalloying elements(V)	-	250	-
cl 5.1, T-1, Note-5, For Microalloying elements(Nb)	-	250	-
cl 5.1, T-1, Note-4, For Cu bearing quality(Cu)	-	50	-
cl 5.1, T-1, Note-2, When Al-Si killed(Si)	-	50	-
cl 5.1, T-1, Note-2, When Al-Si killed(Al)	-	50	-
cl 5.1, T-1, Note-3(N2)	-	700	-
cl 5.1, T-1, designation For GP 550(P)	-	50	-
cl 5.1, T-1, designation For GP 550(S)	-	50	-
cl 5.1, T-1, designation For GP 550(Mn)	-	50	-
cl 5.1, T-1, designation For GP 550(C)	-	50	-
cl 5.1, T-1, Note-3(N2)	-	700	-
cl 5.1, T-1, designation For GP 450(P)	-	50	-
cl 5.1, T-1, designation For GP 450(S)	-	50	-
cl 5.1, T-1, designation For GP 450(Mn)	-	50	-
cl 5.1, T-1, designation For GP 450(C)	-	50	-
cl 5.1, T-1, designation For GP 350 class-2(P)	-	50	-
cl 5.1, T-1, designation For GP 350 class-2(S)	-	50	-
cl 5.1, T-1, designation For GP 350 class-2(Mn)	-	50	-
cl 5.1, T-1, designation For GP 350 class-2(C)	-	50	-
cl 5.1, T-1, designation For GP 300(P)	-	50	-
cl 5.1, T-1, designation For GP 350 class-1(P)	-	50	-
cl 5.1, T-1, designation For GP 350 class-1(S)	-	50	-
cl 5.1, T-1, designation For GP 350 class-1(Mn)	-	50	-
cl 5.1, T-1, designation For GP 350 class-1(C)	-	50	-
cl 5.1, T-1, designation For GP 300(S)	-	50	-
cl 5.1, T-1, designation For GP 300(Mn)	-	50	-
cl 5.1, T-1, designation For GP 300(C)	-	50	-
cl 5.1, T-1, designation For GP275(P)	-	50	-
cl 5.1, T-1, designation For GP275(S)	-	50	-
cl 5.1, T-1, designation For GP275(Mn)	-	50	-
cl 5.1, T-1, designation For GP275(C)	-	50	-
cl 5.1, T-1, designation For GP250(P)	-	50	-
cl 5.1, T-1, designation For GP250(S)	-	50	-
cl 5.1, T-1, designation For GP230(Mn)	-	50	-
cl 5.1, T-1, designation For GP230(C)	-	50	-
cl 5.1, T-1, designation For GPIF(P)	-	50	-
cl 5.1, T-1, designation For GPIF(S)	-	50	-
cl 5.1, T-1, designation For GPIF(Mn)	-	50	-
cl 5.1, T-1, designation For GPIF(C)	-	50	-
cl 5.1, T-1, designation For GPED(P)	-	50	-
cl 5.1, T-1, designation For GPED(S)	-	50	-
cl 5.1, T-1, designation For GPED(Mn)	-	50	-
cl 5.1, T-1, designation For GPED(C)	-	50	-
cl 5.1, T-1, designation For GPD(P)	-	50	-
cl 5.1, T-1, designation For GPD(S)	-	50	-
cl 5.1, T-1, designation For GPD(Mn)	-	50	-
cl 5.1, T-1, designation For GPD(C)	-	50	-
cl 5.1, T-1, designation For GPL(P)	-	50	-
cl 5.1, T-1, designation For GPL(S)	-	50	-
cl 5.1, T-1, designation For GPL(Mn)	-	50	-
cl 5.1, T-1, designation For GPL(C)	-	50	-
cl 5.1, T-1, designation For GC(P)	-	50	-
cl 5.1, T-1, designation For GC(S)	-	50	-
cl 5.1, T-1, designation For GC(Mn)	-	50	-
cl 5.1, T-1, designation For GC(C)	-	50	-
cl 5.1, T-1, designation For GPH (P)	-	50	-
cl 5.1, T-1, designation For GPH (S)	-	50	-
cl 5.1, T-1, designation For GPH (Mn)	-	50	-
cl 5.1, T-1, designation For GPH (C)	-	50	-
cl 5.1, T-1, designation For GP (P)	-	50	-
cl 5.1, T-1, designation For GP (S)	-	50	-
cl 5.1, T-1, designation For GP (Mn)	-	50	-
cl 5.1, T-1, designation For GP (C)	-	50	-
Cl.15.1.3.1(Overall width after corrugation)	-	100	-
Cl.15.1.3.1(Overall width before corrugation)	-	100	-
Cl. 9(Surface roughness)	-	500	-
Cl 14(Length, Width & Thickness)	-	100	-
Cl 13(Weight)	-	50	-
Cl 12(Workmanship)	-	150	-
Cl 10(Galvanising Test)	-	350	-
Cl 8.2(Press)	-	500	-
Cl 8.1(UTM)	-	500	-
Cl.15.1.3.1(Overall width after corrugation)	-	50	-
Cl.15.1.3.1(Overall width before corrugation)	-	50	-
Cl. 9(Surface roughness)	-	500	-
Cl 14(Length, Width & Thickness)	-	100	-
Cl 13(Weight)	-	50	-
Cl 12(Workmanship)	-	150	-
Cl 10(Galvanising Test)	-	350	-
Cl 8.2(Press)	-	500	-
Cl 8.1(UTM)	-	500	-
Cl.15.1.3.1(Overall width after corrugation)	-	100	-
Cl.15.1.3.1(Overall width before corrugation)	-	100	-
Cl. 9(Surface roughness)	-	500	-
Cl 14(Length, Width & Thickness)	-	100	-
Cl 13(Weight)	-	50	-
Cl 12(Workmanship)	-	150	-
Cl 10(Galvanising Test)	-	350	-
Cl 8.2(Press)	-	500	-
Cl 8.1(UTM)	-	500	-

31 Dec, 2026

-
Included w.e.f. 07.11.2023

7742

Alpha Test House Services LLP

IS 8329 (2000)

Centrifugally cast (Spun) ductile iron pressure pipes for water, gas and sewage - Specification (Third Revision)

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 10(Hardness & Tensile Test)	-	3000	10% DISCOUNT TO BIS
Cl 11(Hydrostatic Test)	-	3500	10% DISCOUNT TO BIS
Cl 13(Length, Diameter, Wall Thickness & Ovality)	-	2500	10% DISCOUNT TO BIS
Cl 10(Hardness & Tensile Test)	-	3000	-
Cl 11(Hydrostatic Test)	-	3500	-
Cl 13(Length, Diameter, Wall Thickness & Ovality)	-	2500	-
Cl 10(Hardness & Tensile Test)	-	3000	-

31 Dec, 2026

-
Included w.e.f. 07.11.2023

7743

Alpha Test House Services LLP

IS 9295 (1983)

Specification for steel tubes for idlers for belt conveyors (First Revision)

7650 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Sulphur- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	500	-
7.1(Phosphorous- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	500	-
8.1.1 Table 1(Tensile Strength- IS 1608(1))	-	500	-
8.1.1 Table 1(Yield Strength- IS 1608)	-	250	-
8.1.1 Table 1(Elongation Percent- IS 1608)	-	250	-
8.2(Drift Expansion Test- IS 2335)	-	500	-
8.3(Flattening Test- IS 2328)	-	550	-
9.1 Table 2(Thickness)	-	500	-
9.1 Table 2(Mass)	-	500	-
10(Hardness)	-	500	-
13.1.1(Ovality)	-	500	-
13.1.2(Eccentricity)	-	500	-
15.1(Straightness)	-	1000	-
16.1(Length)	-	500	-
17.1(Surface Protection)	-	200	-
14.0(Workmanship)	-	200	-
6.2(Fin height)	-	200	-
7.1(Sulphur- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	500	-
7.1(Phosphorous- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	500	-
8.1.1 Table 1(Tensile Strength- IS 1608(1))	-	500	-
8.1.1 Table 1(Yield Strength- IS 1608)	-	250	-
8.1.1 Table 1(Elongation Percent- IS 1608)	-	250	-
8.2(Drift Expansion Test- IS 2335)	-	500	-
8.3(Flattening Test- IS 2328)	-	550	-
9.1 Table 2(Thickness)	-	500	-
9.1 Table 2(Mass)	-	500	-
10(Hardness)	-	500	-
13.1.1(Ovality)	-	500	-
13.1.2(Eccentricity)	-	500	-
15.1(Straightness)	-	1000	-
16.1(Length)	-	500	-
17.1(Surface Protection)	-	200	-
7.1(Sulphur- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	500	-
7.1(Phosphorous- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	500	-
8.1.1 Table 1(Tensile Strength- IS 1608(1))	-	500	-
8.1.1 Table 1(Yield Strength- IS 1608)	-	250	-
8.1.1 Table 1(Elongation Percent- IS 1608)	-	250	-
8.2(Drift Expansion Test- IS 2335)	-	500	-
8.3(Flattening Test- IS 2328)	-	550	-
9.1 Table 2(Thickness)	-	500	-
9.1 Table 2(Mass)	-	500	-
10(Hardness)	-	500	-
13.1.1(Ovality)	-	500	-
13.1.2(Eccentricity)	-	500	-
15.1(Straightness)	-	1000	-
16.1(Length)	-	500	-
17.1(Surface Protection)	-	200	-

31 Dec, 2026

-
Included w.e.f. 07.11.2023

7744

Alpha Test House Services LLP

IS 7181 (1986)

Specification for horizontally cast iron double flanged pipes for water, gas and sewage (First Revision)

9900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Manufacture)	-	100	-
3.2(Manufacture)	-	100	-
3.3(Manufacture)	-	2000	-
3.4(Manufacture)	-	100	-
3.5(Manufacture)	-	100	-
5.1(Tensile Test)	-	2500	-
6.1(Hydrostatic Test)	-	2000	-
7.1(Sizes and Mass)	-	500	-
7.2(Sizes and Mass)	-	500	-
7.3(Sizes and Mass)	-	500	-
7.4(Sizes and Mass Dimensions of Flange)	-	500	-
8.5(Permissible Deviation from a Straight Line)	-	500	-
9(Coating)	-	500	-
3.1(Manufacture)	-	100	-
3.2(Manufacture)	-	100	-
3.3(Manufacture)	-	2000	-
3.4(Manufacture)	-	100	-
3.5(Manufacture)	-	100	-
5.1(Tensile Test)	-	2500	-
6.1(Hydrostatic Test)	-	2000	-
7.1(Sizes and Mass)	-	500	-
7.2(Sizes and Mass)	-	500	-
7.3(Sizes and Mass)	-	500	-
7.4(Sizes and Mass Dimensions of Flange)	-	500	-
8.5(Permissible Deviation from a Straight Line)	-	500	-
9(Coating)	-	500	-
3.1(Manufacture)	-	100	-
3.2(Manufacture)	-	100	-
3.3(Manufacture)	-	2000	-
3.4(Manufacture)	-	100	-
3.5(Manufacture)	-	100	-
5.1(Tensile Test)	-	2500	-
6.1(Hydrostatic Test)	-	2000	-
7.1(Sizes and Mass)	-	500	-
7.2(Sizes and Mass)	-	500	-
7.3(Sizes and Mass)	-	500	-
7.4(Sizes and Mass Dimensions of Flange)	-	500	-
8.5(Permissible Deviation from a Straight Line)	-	500	-
9(Coating)	-	500	-

31 Dec, 2026

-
Included w.e.f. 07.11.2023

7745

INDIAN TESTING LABORATORY PRIVATE LIMITED

IS 191 (2007)

Copper - Specification (Fourth Revision)

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1 - Table 4(Copper + Silver(By difference)-IS440)	-	1000	-
7.1 - Table 4(Silver- IS 440)	-	750	-
7.1 - Table 4(Copper (any Silver present to be counted as copper)-IS440)	-	750	-
7.1 - Table 4(Phosphorus- IS 440)	-	750	-
7.1 - Table 4(Arsenic- IS440)	-	750	-
7.1 - Table 4(Antimony-IS440)	-	750	-
7.1 - Table 4(Bismuth-IS 440)	-	750	-
7.1 - Table 4(Iron IS 440)	-	750	-
7.1 - Table 4(Lead IS 440)	-	750	-
7.1 - Table 4(Nickel IS 440)	-	750	-
7.1 - Table 4(Oxygen IS 440)	-	1000	-
7.1 - Table 4(Selenium - IS 440)	-	750	-
7.1 - Table 4(Sulphur- IS 440)	-	500	-
7.1 - Table 4(Tellurium- IS 440)	-	750	-
7.1 - Table 4(Tin - IS 440)	-	750	-
7.1 - Table 4(Znic-IS 440)	-	500	-
7.1 - Table 4(Selenium + Telluuium- IS 440)	-	500	-
7.1 - Table 4(Total Impurities- IS 440)	-	500	-
8.1(FREEDOM FROM DEFECTS)	-	200	-
8.2(FREEDOM FROM DEFECTS)	-	200	-
5.1- Table 2(L)	-	100	-
5.1- Table 2(L1)	-	100	-
5.1- Table 2(h)	-	100	-
5.1- Table 2(h1)	-	100	-
5.1- Table 2(b)	-	100	-
5.1- Table 2(b1)	-	100	-
5.1- Table 2(R)	-	100	-
5.1- Table 2(R1)	-	100	-
5.1- Table 2(R2 )	-	100	-
5.1- Table 2(α )	-	100	-
5.1- Table 2( β )	-	100	-
5.1- Table 2(γ)	-	100	-
5.2(Billets)	-	100	-
5.4-Table 3 (For Billets)(Mass)	-	100	-
5.2-Table 3 (For Billets)(Diameter)	-	100	-
5.2-Table 3 (For Billets)(Length)	-	100	-
5.2-Table 3 (For Billets)(Deviation from straightness per 1000 mm length)	-	100	-
5.4-Table 3 (Vertically continuously cast wire bars)(Mass)	-	100	-
5.3-Table 3 (Vertically continuously cast wire bars)(Width)	-	100	-
5.3-Table 3 (Vertically continuously cast wire bars)(thickness )	-	100	-
5.3-Table 3 (Vertically continuously cast wire bars)(Other dimention)	-	100	-
5.4-Table 3 (Ingots)(Mass)	-	100	-
5.4-Table 3 (Cast cakes)(Mass)	-	100	-
5.3-Table 3 (Cast cakes)(Width)	-	100	-
5.3-Table 3 (Cast cakes)(thickness )	-	100	-
5.3-Table 3 (Cast cakes)(Deviation from straightness per 1000 mm length)	-	100	-

15 Aug, 2028

-
Amendment No. 2 Included w.e.f. 22.03.2023.

7746

Alpha Test House Services LLP

IS 13095 (2020)

Butterfly Valves for General Purposes ( First Revision )

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0(VALVE END CONNECTIONS)	-	50	-
6.0( NOMINAL SIZES )	-	50	-
7.0(NOMINAL PRESSURES)	-	50	-
7.2(Class designations)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Flange-D)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges-IS 6418 (Table 2/3/6/7/10)- Flange-b)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges-IS 6418 (Table 2/3/6/7/10)- Rasied Face-d4)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges-IS 6418 (Table 2/3/6/7/10)- Rasied Face-f)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Bolting )	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Drilling -Nos. )	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Drilling -d2)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Drilling -k)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Neck -d3)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Neck- r)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Flange-D)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Flange-b)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Rasied Face-d4)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Rasied Face-f)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Bolting)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Drilling -Nos. )	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Drilling -d2 )	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Drilling -k)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Neck -d3)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Neck-r)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Pipe O.D.- d1)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Flange - D)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Flange - b)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Raised Face - d4)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Raised Face - f)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Bolting)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Drilling - Nos.)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Drilling -d2)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Drilling -k)	-	50	-
9.1.1 ( Double Flanged Body Ends)	-	50	-
9.2.2(Wafer Body Ends)	-	200	-
10.1 -Table1 (FACE TO FACE DIMENSIONS)	-	200	-
11.0(Bodies)	-	200	-
12.0(DISC AND SHAFT)	-	200	-
13.0(SEATING AND LININGS)	-	200	-
14.0(BEARINGS)	-	200	-
14.2(BEARINGS)	-	200	-
14.3(BEARINGS)	-	200	-
16.0(OPERATION)	-	500	-
17.1(Performance Testing)	-	1000	-
17.2(Body Test)	-	1000	-
17.3(Seat Test)	-	300	-
17.4(Disc Strength Test)	-	300	-
Cl. 15 Table 2(Materials)	-	1500	-
5.0(SERVICE APPLICATIONS)	-	100	-
Cl. 15 Table 2(Materials)	-	1500	-

31 Dec, 2026

-
Included w.e.f. 07.11.2023

7747

Alpha Test House Services LLP

IS 15647 (2006)

Hot rolled steel narrow width strip for welded tubes and pipes

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(UTM)	-	1000	10% DISCOUNT TO BIS
Cl 9(Press)	-	2000	10% DISCOUNT TO BIS
Cl 11(Workmanship)	-	100	-
Cl 12(Length, Width & Thickness)	-	2000	10% DISCOUNT TO BIS
Cl. 8.2 Table 3(Elongation)	-	1000	10% DISCOUNT TO BIS
Cl. 8.2 Table 3(Yield Stress)	-	1000	10% DISCOUNT TO BIS
7(Chemical Composition)	-	2500	10% DISCOUNT TO BIS
Cl 8(UTM)	-	1000	-
Cl 9(Press)	-	2000	-
Cl 11(Workmanship)	-	100	-
Cl 12(Length, Width & Thickness)	-	2000	-
Cl. 8.2 Table 3(Elongation)	-	1000	-
Cl. 8.2 Table 3(Yield Stress)	-	1000	-
7(Chemical Composition)	-	2500	-
Cl 13(Workmanship)	-	300	-

31 Dec, 2026

-
Included w.e.f. 07.11.2023

7748

Alpha Test House Services LLP

IS 6603 (2001)

Stainless steel bars and flats - Specification (First Revision)

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Carbon -Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	200	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Silicon- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	200	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Manganese- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	200	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Nickel -Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	200	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Chromium- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	200	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Molybdenum- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	200	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Titanium- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	100	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Niobium- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	100	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Sulphur- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	100	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Phosphorus- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	100	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Others (Nitrogen)- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	400	-
Cl.14.1(Corrosion Resistance- IS 10461(Part1))	-	1000	-
Cl.14.1(Corrosion Resistance- IS 10461(Part2))	-	900	-
6(Freedom from defects:)	-	100	-
9.1, Table 3(0.2 Percent Proof Stress, MPa)	-	500	-
9.2, Table 3(Tensile Strength, MPa)	-	500	-
9.3, Table 3(Elongation ,Percent)	-	500	-
9.4, Table 3(Annealed Hardness, HB-IS 1500: Pt 1)	-	1000	-
9.5, Table 3(Charpy Impact Test, J-IS 1499)	-	3000	-
12(Diameter, mm)	-	200	-
12(Out of Round , mm)	-	200	-
12(Length , mm)	-	200	-
12(Variation in Straightness)	-	200	-
12(Dimensions & Tolerances, mm-IS 6603)	-	200	-
Cl. 9.3 Table 3(Bend Test)	-	500	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Carbon -Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	200	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Silicon- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	200	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Manganese- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	200	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Nickel -Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	200	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Chromium- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	200	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Molybdenum- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	200	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Titanium- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	100	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Niobium- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	100	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Sulphur- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	100	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Phosphorus- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	100	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Others (Nitrogen)- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	400	-
Cl.14.1(Corrosion Resistance- IS 10461(Part1))	-	1000	-
Cl.14.1(Corrosion Resistance- IS 10461(Part2))	-	900	-
6(Freedom from defects:)	-	100	-
9.1, Table 3(0.2 Percent Proof Stress, MPa)	-	500	-
9.2, Table 3(Tensile Strength, MPa)	-	500	-
9.3, Table 3(Elongation ,Percent)	-	500	-
9.4, Table 3(Annealed Hardness, HB-IS 1500: Pt 1)	-	1000	-
9.5, Table 3(Charpy Impact Test, J-IS 1499)	-	3000	-
12(Diameter, mm)	-	200	-
12(Out of Round , mm)	-	200	-
12(Length , mm)	-	200	-
12(Variation in Straightness)	-	200	-
12(Dimensions & Tolerances, mm-IS 6603)	-	200	-
Cl. 9.3 Table 3(Bend Test)	-	500	-

31 Dec, 2026

-
Included w.e.f. 07.11.2023

7749

Alpha Test House Services LLP

IS 6528 (1995)

Stainless steel wire - Specification (First Revision)

15375 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6(Workmanship)	-	100	15% DISCOUNT TO BIS
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Nitrogen)	-	500	15% DISCOUNT TO BIS
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Titanium)	-	200	15% DISCOUNT TO BIS
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Vanadium)	-	200	15% DISCOUNT TO BIS
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Boron)	-	200	15% DISCOUNT TO BIS
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Copper)	-	200	15% DISCOUNT TO BIS
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Molybdenum)	-	200	15% DISCOUNT TO BIS
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Nickel)	-	200	15% DISCOUNT TO BIS
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Chromium)	-	200	15% DISCOUNT TO BIS
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Aluminium)	-	200	15% DISCOUNT TO BIS
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Silicon)	-	200	15% DISCOUNT TO BIS
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Manganese)	-	200	15% DISCOUNT TO BIS
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Phosphorous)	-	200	15% DISCOUNT TO BIS
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Sulphor)	-	200	15% DISCOUNT TO BIS
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Carbon)	-	200	15% DISCOUNT TO BIS
Cl 10(UTM)	-	9375	15% DISCOUNT TO BIS
Cl 9.1 & Table 3(Diameter & Out Of Round)	-	500	15% DISCOUNT TO BIS
Cl 6(Workmanship)	-	100	15% DISCOUNT TO BIS
Cl 10(UTM)	-	9375	15% DISCOUNT TO BIS
Cl 9.1 & Table 3(Diameter & Out Of Round)	-	500	15% DISCOUNT TO BIS
Cl 6(Workmanship)	-	100	15% DISCOUNT TO BIS
Cl 10(UTM)	-	9375	15% DISCOUNT TO BIS
Cl 9.1 & Table 3(Diameter & Out Of Round)	-	500	15% DISCOUNT TO BIS
10.2(Reverse bend test-IS 1716)	-	800	15% DISCOUNT TO BIS
10.3(Torsion test- IS 1717)	-	800	15% DISCOUNT TO BIS
10.4(Wrapping test-IS 1755)	-	900	15% DISCOUNT TO BIS
Table 7(Workmanship)	-	100	15% DISCOUNT TO BIS
Cl 6(Workmanship)	-	100	15% DISCOUNT TO BIS
Cl 10(UTM)	-	9375	15% DISCOUNT TO BIS
Cl 9.1 & Table 3(Diameter & Out Of Round)	-	500	15% DISCOUNT TO BIS
10.2(Reverse bend test-IS 1716)	-	800	15% DISCOUNT TO BIS
10.3(Torsion test- IS 1717)	-	800	15% DISCOUNT TO BIS
10.4(Wrapping test-IS 1755)	-	900	15% DISCOUNT TO BIS
Table 7(Workmanship)	-	100	15% DISCOUNT TO BIS

31 Dec, 2026

-
Included w.e.f. 07.11.2023

7750

INDIAN TESTING LABORATORY PRIVATE LIMITED

IS 1660 (2009)

Wrought aluminium utensils - Specification (First Revision)

GROUP- I, II, III, IV, V

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Classification Heavy/Medium/L:ight)	-	250	-
4(Material)	-	1500	-
5.1(The utensil shall be pressed or spun from one piece)	-	250	-
5.2( Body Thickness of the thinnest part of the finished utensil, mm Not declared )	-	250	-
5.2(Lid Thickness of the finished utensil, mm)	-	250	-
6.1 & Table 1( i) Name of Utensil )	-	250	-
6.1 & Table 1(ii) Shape of Utensil)	-	250	-
6.1 & Table 1( Nominal Size, mm)	-	250	-
6.1 & Table 1(Inside dia, Φ D mm Not declared )	-	250	-
6.1 & Table 1(Outside dia Ф NA)	-	250	-
6.1 & Table 1(Height NA)	-	250	-
6.1 & Table 1(Capacity, l NA)	-	500	-
6.1( Minimum sheet thickness for nominal size )	-	500	-
7.1(HANDLES ,When fitted shall be of aluminium, stainless steel or of other suitable fire resistance material These shall be fastened to the utensils by tightly drawn aluminium or stainless steel rivets, by welding, by screwing to cast bosses or by riveting between flange at the end of the handles. Handles shall be so shaped and positioned to facilitate the carrying and handling of the utensils in normal use )	-	1000	-
7.2(Handles shall be sufficiently strong to support a mass in the utensils equivalent to three times the mass of the water capacity of the utensils in the position of normal use without visible permanent deformation of the handle or utensil)	-	1000	-
8.1(The utensils shall be clean reasonably free from distortion, dents, wrinkles, wavy surface, burrs, scratches, pitting and deep tool marks and other surface defects)	-	250	-
8.2(The design of the utensils shall be such that it is easy to clean and prevent accumulation of dirt)	-	250	-
8.4.1.2( Finish of the coating: The coating shall be smooth continuous and uniform in appearance, and shall be adherent. It shall be free from powdery areas, loose films and discontinuities, such as breaks and scratches. The size and number of contact marks shall be minimum consistent with good practice.)	-	250	-
8.4.2(A coating of thickness 25 to 100 microns is generally required)	-	250	-
8.4.3(Abrasion Resistance When the coating surface is rubbed two or three times with emery paper with emery conforming to grit number 180 using medium finger pressure, it shall not abrade the surface but shall skid over the surface showing not more than a trace of whitening of the surface)	-	500	-
8.4.4(The colour of the hard anodic coating varies depending upon the alloy, thickness of the coating and electrolye. Normally the colour may vary from dark grey (almost black) to light grey. )	-	500	-
8.4.5 (When the coated surface is rubbed two or three times with fine emery paper grit number 180 using medium finger pressure, cloth or paper shall not abrade the surface. A faint trace of whitening on the cloth or paper is permissible)	-	500	-
9(The manufacturer shall provide full instructions for use and cleaning for coated or hard anodized utensils)	-	500	-
10(Each vessel shall be legibly and indelibly stamped on the outside surface or handle with the manufacturer’s name or registered trade-mark, size and thickness or class. )	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Nitrogen of IS 6911)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Titanium of IS 6911)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Vanadium of IS 6911)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Boron of IS 6911)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Copper of IS 6911)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Molybdenum of IS 6911)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Nickel of IS 6911)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Chromium of IS 6911)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Aluminium of IS 6911)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Silicon of IS 6911)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Manganese of IS 6911)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Phosphorous of IS 6911)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Sulphor of IS 6911)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Carbon of IS 6911)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Titanium of IS 737)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Chromium of IS 737)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Zinc of IS 737)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Manganese of IS 737)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Iron of IS 737)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Silicon of IS 737)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Magnesium of IS 737)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Copper of IS 737)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Aluminium of IS 737)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Titanium / other Grain of IS 21)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Chromium of IS 21)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Zinc of IS 21)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Manganese of IS 21)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Iron of IS 21)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Silicon of IS 21)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Magnesium of IS 21)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Copper of IS 21)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Aluminium of IS 21)	-	500	-
Clause 3.1.3, Table 2(Minimum Thickness at the bottom)	-	500	-
Clause 3.1.3, Table 2(Minimum Thickness of wall at top edge)	-	250	-
Clause 3.1.3, Table 2(Minimum Cover Thickness)	-	250	-
Clause 8.6.1(Performance test)	-	1000	-
Clause 8.6.2(Ground Nut Oil Test for Leakage)	-	500	-
0.5(Fabrication)	-	250	-
5.4(Qualitative and Anodized Coating)	-	250	-
5.5(Qualitative and Anodized Coating)	-	250	-
8.3(Anodized Coating)	-	250	-
8.5(Plastic Coating)	-	250	-

15 Aug, 2028

-
-

7751

INDIAN TESTING LABORATORY PRIVATE LIMITED

IS 2347 (2017)

Domestic pressure cooker - Specification (Sixth Revision)

GROUP I, II & III

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.6.2(Tests for Removal of Lid under Pressure For inner Lid Cooker)	-	750	-
8.6.1(Tests for Removal of Lid under Pressure For Outer Lid Cooker)	-	750	-
8.5(Bursting Pressure Test)	-	1000	-
8.4(Test for Safety Pressure Relief Device)	-	750	-
8.3(Operating Test for Pressure Regulating Device)	-	750	-
8.2(Proof Pressure Test)	-	750	-
8.1(Air Pressure Test)	-	750	-
7.4(WORKMANSHIP AND FINISH)	-	250	-
7.3(WORKMANSHIP AND FINISH)	-	250	-
7.2(WORKMANSHIP AND FINISH)	-	250	-
7.1(WORKMANSHIP AND FINISH)	-	250	-
6.4.1.1(Handles and Knobs)	-	4500	-
6.4.1(Handles and Knobs)	-	2500	-
6.3.1(Temperature Responsive Pressure Relief Device)	-	750	-
6.2.2(Safety Relief Device)	-	750	-
6.2.1(Safety Relief Device)	-	750	-
6.1.5(Pressure Regulating Device)	-	750	-
6.1.4(Pressure Regulating Device)	-	750	-
6.1.3(Pressure Regulating Device)	-	750	-
6.1.2(Pressure Regulating Device)	-	750	-
6.1.1(Pressure Regulating Device)	-	750	-
6(CONSTRUCTION)	-	250	-
5.7(Vent Pipe)	-	250	-
5.6(Vent Seal Pin for Pressure Regulating Device)	-	500	-
5.5(Pressure Regulating Device)	-	750	-
5.2(Safety Relief Device)	-	750	-
4.1(Capacity)	-	500	-
8.14(3 Ply Construction Cooker Body)	-	1500	-
8.12(Internal Coating)	-	1000	-
8.11(External Coating )	-	1000	-
8.10 NOTES (3)(Handles of the cooker - Proof Pressure)	-	250	-
8.10 NOTES (4)(Handles of the cooker)	-	2500	-
8.10 NOTES (5)(Handles of the cooker)	-	250	-
8.10 NOTES (6)(Handles of the cooker)	-	500	-
8.10 (a)(Handles of the cooker- Resistance to Burning)	-	250	-
8.10 (b)(Handles of the cooker- Heat Resistance)	-	1500	-
8.10 (c)(Handles of the cooker- Torque Strength)	-	1500	-
8.10 (d)(Handles of the cooker- Bending Strength)	-	1500	-
8.10 (e)(Handles of the cooker- Fatigue Resistance)	-	1500	-
8.10 (f)(Handles of the cooker- Thermal Insualtion Test)	-	1500	-
8.4 Annex H-1.1(Test for SPRD - For Destructible Devices )	-	1000	-
8.4 Annex H-1.2(Test for SPRD - For Resettable Devices )	-	1000	-
5.8(Vent Pipe Nut)	-	1000	-
5.1.1(Body, Lid, Containers and Grid)	-	1000	-
5.1.2(Body, Lid, Containers and Grid)	-	1000	-
5.1.3(Body, Lid, Containers and Grid)	-	1000	-
5.1.4(Body, Lid, Containers and Grid)	-	1000	-
5.3(Gasket)	-	1500	-
5.4(Handles and Knobs)	-	1000	-

15 Aug, 2028

-
for all grades except "for pressure cooker operated by spring loaded mechanism test"

7752

INDIAN TESTING LABORATORY PRIVATE LIMITED

IS 740 (1977)

Specification for wrought aluminium and aluminium alloy rivet stock for general engineering purposes (Second Revision)

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1, Table 1of IS:740 (Designation & Condition 65032, 'W')(Tensile Strength of Size upto and including 25 mm)	-	1000	-
4.1, Table 1of IS:740 (Designation & Condition 64430, 'W')(Tensile Strength of Size upto and including 25 mm)	-	1000	-
4.1, Table 1of IS:740 (Designation & Condition 55000, 'OD')(Tensile Strength of Size upto and including 25 mm)	-	1000	-
4.1, Table 1of IS:740 (Designation & Condition 55000, 'O or M')(Tensile Strength of Size upto and including 25 mm)	-	1000	-
4.1, Table 1of IS:740 (Designation & Condition 53000, 'OD')(Tensile Strength of Size upto and including 25 mm)	-	1000	-
4.1, Table 1of IS:740 (Designation & Condition 53000, 'O or M')(Tensile Strength of Size upto and including 25 mm)	-	1000	-
4.1, Table 1of IS:740 (Designation & Condition 24345, 'W')(Tensile Strength of Size upto and including 12 mm)	-	1000	-
4.1, Table 1of IS:740 (Designation & Condition 19000, '112')(Tensile Strength of Size upto and including 12 mm)	-	1000	-
4.1, Table 1of IS:740 (Designation 65032)(Aluminium)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Either Cr or Mn shall present)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Chromium)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Titanium and or other grain refining elements)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Zinc)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Manganese)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Iron)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Silicon)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Magnesium)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Copper)	-	500	-
4.1, Table 1of IS:740 (Designation 64430)(Aluminium)	-	500	-
4.1, Table 1of IS:740 (Designation 64430)(Cr+Mn)	-	500	-
4.1, Table 1of IS:740 (Designation 64430)(Chromium)	-	500	-
4.1, Table 1of IS:740 (Designation 64430)(Titanium and or other grain refining elements)	-	500	-
4.1, Table 1of IS:740 (Designation 64430)(Zinc)	-	500	-
4.1, Table 1of IS:740 (Designation 64430)(Manganese)	-	500	-
4.1, Table 1of IS:740 (Designation 64430)(Copper)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Aluminium)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Cr+Mn)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Chromium)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Titanium and or other grain refining elements)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Zinc)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Manganese)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Iron)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Silicon)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Magnesium)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Copper)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Aluminium)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Cr+Mn)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Chromium)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Titanium and or other grain refining elements)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Zinc)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Manganese)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Iron)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Silicon)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Magnesium)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Copper)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Aluminium)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Chromium)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Titanium and or other grain refining elements)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Zinc)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Manganese)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Iron)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Silicon)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Magnesium)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Copper)	-	500	-
4.1, Table 1of IS:740 (Designation 19000)(Cu+Mg+Si+Fe+Mn+Zn)	-	500	-
4.1, Table 1of IS:740 (Designation 19000)(Aluminium)	-	500	-
4.1, Table 1of IS:740 (Designation 19000)(Zinc)	-	500	-
4.1, Table 1of IS:740 (Designation 19000)(Manganese)	-	500	-
4.1, Table 1of IS:740 (Designation 19000)(Iron)	-	500	-
4.1, Table 1of IS:740 (Designation 19000)(Silicon)	-	500	-
4.1, Table 1of IS:740 (Designation 19000)(Magnesium)	-	500	-
4.1, Table 1of IS:740 (Designation 19000)(Copper)	-	500	-
6(Freedom From Defects)	-	250	-
7(Dmension And Tolerances)	-	250	-
9.2(Head Forming Test)	-	250	-
11(Marking)	-	250	-

15 Aug, 2028

-
-

7753

INDIAN TESTING LABORATORY PRIVATE LIMITED

IS 13395 (2021)

Performance of Handles and Handle Assemblies Attached to Cookware - Specification ( First Revision )

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(General)	-	500	-
5.2(Bending Strength)	-	2500	-
5.3(Torque Strength)	-	2500	-
5.4(Impact Strength)	-	2000	-
5.5(Fatigue Resistance)	-	2000	-
5.6(Leakage)	-	2000	-
5.7(Thermal Insulation)	-	1500	-
5.8(Heat Resistance)	-	2500	-
5.9(Washing Resistance)	-	2000	-
5.1(Burning Resistance)	-	1500	-
5.1(General)	-	500	-
5.2(Bending strength)	-	2500	-
5.3(Torque strength)	-	2500	-
5.4(Impact strength)	-	2000	-
5.5(Fatigue resistance)	-	2000	-
5.6(Leakage)	-	2000	-
5.7(Thermal insulation)	-	1500	-
5.8(Heat resistance)	-	2500	-
5.9(Washing resistance)	-	2000	-
5.10(Burning resistance)	-	1500	-
4.1(Construction)	-	250	-
4.2(Materials)	-	250	-
4.3(Selection and Size)	-	250	-
4.4(Position of handle and knob with respect to cookware)	-	250	-
4.5(Attachment to cookware)	-	250	-

15 Aug, 2028

-
-

7754

INDIAN TESTING LABORATORY PRIVATE LIMITED

IS 7466 (1994)

Rubber gaskets for pressure cookers - Specifications (First Revison)

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Workmanship and Finish )	-	500	-
3.4-Table 1(i)(Requirements of Rubber Used for Gaskets-Hardness IRHD)	-	1000	-
3.4-Table 1(ii)(Requirements of Rubber Used for Gaskets-Tensile strength,)	-	1500	-
3.4-Table 1(iii)(Requirements of Rubber Used for Gaskets-Elongation at break)	-	1000	-
3.4-Table 1(iv-a)(Requirements of Rubber Used for Gaskets-Hardness IRHD(After ageing 3 days in Aie-oven Change From Original Value))	-	2500	-
3.4-Table 1(iv-b)(Requirements of Rubber Used for Gaskets-Tensile strength(After ageing 3 days in Aie-oven Change From Original Value))	-	2500	-
3.4-Table 1(iv-c)(Requirements of Rubber Used for Gaskets-Elongation at break(After ageing 3 days in Aie-oven Change From Original Value))	-	1500	-
3.4-Table 1(v-a)(Requirements of Rubber Used for Gaskets-Hardness IRHD(After ageing in an autoclave Change From Original Value))	-	500	-
3.4-Table 1(v-b)(Requirements of Rubber Used for Gaskets-Tensile strength(After ageing in an autoclave Change From Original Value))	-	1500	-
3.4-Table 1(v-c)(Requirements of Rubber Used for Gaskets-Elongation at break(After ageing in an autoclave Change From Original Value))	-	1000	-
3.4-Table 1(vi)(Compression set)	-	2000	-
3.5-ANNEX C(PERFORMANCE TEST FOR PRESSURE COOKER )	-	2500	-
Clause 4.3 Table 1(Zinc oxide)	-	1500	-
Clause 3.4 Table 1(Heavy metal content)	-	1500	-
3.4. and Table 1 v) d(Requirements of Rubber Used for Gaskets-Volume(After ageing in an autoclave Change From Original Value))	-	1500	-
4.2(Marking)	-	250	-

15 Aug, 2028

-
-

7755

INDIAN TESTING LABORATORY PRIVATE LIMITED

IS 6911 (2017)

Stainless steel plate, sheet and strip - Specification (Second Revision)

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.1 & 7.2 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Molybdenum -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Copper -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Others-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Titanium-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Niobium-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl.12(Corrosion Resistance- IS 10461(Part1))	-	1000	-
6(Freedom from defects , IS 6911)	-	250	-
10.1,Table 4&Table 6(Tensile Test - IS 1608(Pt -1))	-	1000	-
10.2,Table 4&Table 5(Hardness Test- IS 1500(Pt -1),IS 1501 (Pt-1),IS 1586 (Pt -1))	-	750	-
10.3(Bend Test - IS 1599)	-	500	-
11,Table 7(Erichsen cupping test-IS 10175)	-	750	-
15(Surface Finish)	-	250	-
10.1 Amd 2(Yeild Strength)	-	500	-
10.1 Amd 2(0.2 Percent Proof Stress)	-	500	-
10.1 Amd 2(Elongation)	-	500	-
Clause 17 , Table 9 to Table 19(Dimension (Length))	-	500	-
Clause 17 , Table 9 to Table 19(Dimension (Width))	-	500	-
Clause 17 , Table 9 to Table 19(Dimension (Thickness))	-	500	-
Clause 17 , Table 9 to Table 19(Flatness)	-	300	-
Clause 17 , Table 9 to Table 19(Camber)	-	300	-
4(Supply of Material)	-	250	-
8(Heat Treatment)	-	250	-
19(Marking)	-	250	-

15 Aug, 2028

-
-

7756

INDIAN TESTING LABORATORY PRIVATE LIMITED

IS 7809 : Part 3 : Sec 1 (1986)

Specification for pressure sensitive adhesive insulating tapes for electrical purposes: Part 3 requirements or individual materials: Sec 1 plasticized polyvinylchloride tapes with non - Thermosetting adhesive (First Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General Requirments,as per IS 7809 (Part 1 ) :1975 )	-	250	-
Cl.No.3.2(Width)	-	500	-
Cl.No.3.3(Length)	-	500	-
Cl.No.3.4(Thickness)	-	500	-
Cl.No.4.1(Tensile Strength)	-	1500	-
Cl.No.4.2(Adhesion to Steel)	-	1500	-
Cl.No.4.3(Adhesion to backing)	-	1500	-
Cl.No.4.4(Electric Strength at RT)	-	2500	-
Cl.No.4.5(Electric Strength after Humid Conditioning)	-	2500	-
Cl.No.4.6(Flammability)	-	1500	-
4.7(Electrolytic corrosion)	-	4500	-
4.8(Stability to accelerated ageing )	-	4000	-
Cl.No.4.9(Insulation Resistance)	-	2500	-
Cl.No.4 of IS 7809 (Part 1)-1975(Appearance)	-	500	-
Cl.No.5 of IS 7809 (Part 1)-1975(Freedom From Deffects)	-	500	-
3.1(Marking, Cl.9 of IS 7809 (Part 1):1975)	-	200	-

15 Aug, 2028

-
-

7757

INDIAN TESTING LABORATORY PRIVATE LIMITED

IS 3854 (1997)

Switches for domestic and similar purposes - Specification (Second Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Marking)	-	250	-
8(Marking)	-	250	-
8.9(Marking)	-	250	-
7(Classification)	-	250	-
10(Protection against Electric Shock)	-	250	-
11.1(Provision for earthing)	-	250	-
12(Terminals)	-	250	-
12.2.2(Connection of conductor)	-	250	-
12.2.3(Mechanical strength of terminals)	-	500	-
12.2.4(Resistance to corrosion)	-	500	-
12.2.5(Undue damage to conductor)	-	500	-
12.2.7(Insertion of conductor)	-	250	-
12.2.9(Locking against accidental loosening)	-	250	-
12.2.11(Distance between screw and conductor)	-	250	-
12.3.2(Screwless terminals)	-	250	-
12.3.3(Connectin of conductor)	-	250	-
12.3.4(Material of terminals)	-	250	-
12.3.5(Clamping)	-	250	-
12.3.7(v) Interconnection of conductors [Cl. 12.3.7])	-	250	-
12.3.11(vi) Electrical & Thermal Stresses [Cl 12.3.11])	-	1000	-
12.3.12(vii) Deflection Stresses [Cl. 12.3.12])	-	1000	-
13.1(a) Insulating lining, barriers and the like [Cl 13.1])	-	500	-
13.2(b) Construction of switch [Cl 13.2])	-	250	-
13.2(i) Installation Test)	-	250	-
13.3(c) Covers,cover plates and actuating members [Cl 13.3])	-	250	-
13.4(d) Ordinary switches [Cl 13.4])	-	250	-
13.5(e) Rotary switches [Cl 13.5])	-	250	-
13.6(f) Screws and other means [Cl 13.6])	-	250	-
13.7(g) Combination of switches or switches and socket outlets [Cl 13.7])	-	250	-
13.8(h) Assessories combined with switches [Cl. 13.8])	-	250	-
13.9(j) Switches other than ordinary switches [Cl. 13.9])	-	250	-
13.1(k) Switches to be installed in a box [Cl. 13.10])	-	250	-
13.11(l) Surface type switches other than ordinary switch [Cl. 13.11])	-	250	-
13.15(q) Requirements for membrane in inlet opening [ Cl. 13.15])	-	250	-
15.1(Resistance to Ageing, to Harmful Ingress of water and to Humidity [Cl. 15]: Resistance to Ageing, [Cl. 15.1])	-	1000	-
15.2(b)Resistance to Harmful ingress of water [Cl. 15.2])	-	1000	-
15.3(c) Resistance to Humidity [Cl. 15.3])	-	1000	-
16.1(Insulation resistance [Cl. 16.1])	-	1000	-
17(Temperature- rise [Cl. 17])	-	1000	-
16.2( Electric Strength [Cl. 16.2])	-	1000	-
18(Marking and breaking Capacity[Cl. 18])	-	1000	-
19(Normal Operation [Cl. 19] a) General & Operation)	-	1000	-
14.3(d)Test for arcing and sparking [Cl 14.3])	-	500	-
21(Resistance to Heat [Cl.21])	-	750	-
22(Screw, Current Carrying Part And Connection [Cl.22])	-	500	-
22.1(i) Screw & Nuts [Cl.22.1])	-	500	-
22.4(ii) Screw & rivets [Cl . 22.4])	-	500	-
22.3(iii) Electrical Connections [Cl.22.3])	-	500	-
23.2(Creepage distances, clearances and distance through sealing compound [Cl.23])	-	750	-
24.1.1(Resistance to Abnormal Heat & Fire [Cl.24.1] [Glow Wire Test] [Cl.24.1.1])	-	1500	-
24.2(Resistance to tracking [For Switch other than ordinary] [Cl.24.2])	-	1500	-
25 of IS 3854 : 1997(Resistance to rusting)	-	1000	-
11.3(Provision for earthing)	-	1000	-
16.3(Flash test)	-	750	-
20.8(Mechanical Strength Test)	-	500	-
20.7(Mechanical Strength Test)	-	500	-
22.2(Measurement and manual test)	-	250	-
22.6(Inspection and chemical analysis)	-	250	-
16.3(Insulation resistance and electric strength )	-	750	-
13.12, 13.13, 13.14(m) Inlet opening [Cl. 13.12.13.13 & 13.14])	-	750	-
14(Mechanism [Cl. 14])	-	750	-
12.2.6(Terminals, Qualitative)	-	250	-
12.3.1(Terminals, Qualitative)	-	250	-
12.3.6(Terminals, Qualitative)	-	250	-
12.3.10(Terminals, Qualitative)	-	250	-
13.12(Qualitative)	-	250	-

15 Aug, 2028

-
Upto 16 Amp. Excluding AX type

7758

INDIAN TESTING LABORATORY PRIVATE LIMITED

IS 1293 (2019)

Plugs and socket - Outlets of rated Voltage up to and including 250 Volts and rated current up to and including 16 amperes - Specification (Third Revision)

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Ratings)	-	100	-
7.1.1(Accessories Classification)	-	100	-
7.1.2(Accessories Classification)	-	100	-
7.1.3(Accessories Classification)	-	100	-
7.1.4(Accessories Classification)	-	100	-
7.1.5(Accessories Classification)	-	100	-
7.2.1(Socket-Outlets Classification)	-	100	-
7.2.2(Socket-Outlets Classification)	-	100	-
7.2.3(Socket-Outlets Classification)	-	100	-
7.2.4(Socket-Outlets Classification)	-	100	-
7.3(Plug Classification)	-	100	-
8.1(MARKING)	-	500	-
8.8(MARKING)	-	500	-
8.9(MARKING)	-	500	-
9.1(CHECKING OF DIMENSIONS)	-	500	-
9.2(CHECKING OF DIMENSIONS)	-	500	-
10.1(PROTECTION AGAINST ELECTRIC SHOCK)	-	500	-
10.1(PROTECTION AGAINST ELECTRIC SHOCK)	-	500	-
10.3(PROTECTION AGAINST ELECTRIC SHOCK)	-	500	-
10.4(PROTECTION AGAINST ELECTRIC SHOCK)	-	500	-
10.5(PROTECTION AGAINST ELECTRIC SHOCK)	-	500	-
10.6(PROTECTION AGAINST ELECTRIC SHOCK)	-	500	-
10.7(PROTECTION AGAINST ELECTRIC SHOCK)	-	500	-
11.1(PROVISIONS FOR EARTHING)	-	500	-
11.2(PROVISIONS FOR EARTHING)	-	500	-
11.3(PROVISIONS FOR EARTHING)	-	500	-
11.4(PROVISIONS FOR EARTHING)	-	500	-
11.5(PROVISIONS FOR EARTHING)	-	500	-
11.6(PROVISIONS FOR EARTHING)	-	500	-
12.1.1(TERMINALS)	-	250	-
12.1.2(TERMINALS)	-	250	-
12.2.1(TERMINALS)	-	250	-
12.2.2(TERMINALS)	-	250	-
12.2.3(TERMINALS)	-	250	-
12.2.4(TERMINALS)	-	250	-
12.2.5(TERMINALS)	-	250	-
12.2.6(TERMINALS)	-	250	-
12.2.7(TERMINALS)	-	250	-
12.2.8(TERMINALS)	-	250	-
12.2.9(TERMINALS)	-	250	-
12.3.1(TERMINALS)	-	250	-
12.3.11(TERMINALS)	-	250	-
12.3.2(TERMINALS)	-	250	-
12.3.3(TERMINALS)	-	250	-
12.3.4(TERMINALS)	-	250	-
12.3.5(TERMINALS)	-	250	-
12.3.6(TERMINALS)	-	250	-
12.3.7(TERMINALS)	-	250	-
12.3.8(TERMINALS)	-	250	-
12.3.9(TERMINALS)	-	250	-
12.3.10(TERMINALS)	-	250	-
12.3.12(TERMINALS)	-	250	-
13.1(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.2(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.3(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.4(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.5(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.6(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.7(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.8(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.9(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.1(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.11(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.12(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.13(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.14(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.15(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.16(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.17(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.18(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.19(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.2(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.21(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.22(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.23(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
14.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.3(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.4(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.5(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.6(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.7(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.8(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.9(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.11(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.13(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.14(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.15(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.16(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.17(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.18(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.19(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.21(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.22(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.23.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.23.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.24(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.25(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.26(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
15(INTERLOCKED SOCKET-OUTLETS)	-	100	-
16.1(RESISTANCE TO AGEING,)	-	500	-
16.2(RESISTANCE TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	1000	-
16.3(Resistance to Humidity)	-	1000	-
17.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	1000	-
17.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	1000	-
17.3(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	1000	-
18(OPERATION OF EARTHING CONTACTS)	-	500	-
19(TEMPERATURE RISE)	-	1000	-
20(BREAKING CAPACITY)	-	1500	-
21(NORMAL OPERATION)	-	1500	-
22.1(Verification of the Maximum Withdrawal Force)	-	500	-
22.2(Verification of Minimum Withdrawal Force)	-	500	-
23.1(FLEXIBLE CABLES AND THEIR CONNECTION)	-	500	-
23.1(FLEXIBLE CABLES AND THEIR CONNECTION)	-	500	-
23.3(FLEXIBLE CABLES AND THEIR CONNECTION)	-	500	-
23.4(FLEXIBLE CABLES AND THEIR CONNECTION)	-	500	-
24.1(MECHANICAL STRENGTH For all kinds of fixed socket-outlets )	-	500	-
24.1(MECHANICAL STRENGTH For portable multiple and combined socket outlets with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	500	-
24.1(MECHANICAL STRENGTH For surface mounting boxes)	-	500	-
24.2(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	500	-
24.2(MECHANICAL STRENGTH For plug 1) with enclosures, covers and bodies other than elastomeric or thermoplastic material)	-	500	-
24.5(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	500	-
24.5(MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	500	-
24.5(MECHANICAL STRENGTH For Plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	500	-
24.6(MECHANICAL STRENGTH For screwed glands of accessories having an IP code higher than IP20)	-	500	-
24.7(MECHANICAL STRENGTH For plug pins provided with insulating sleeves)	-	500	-
24.8(MECHANICAL STRENGTH For shuttered socket-outlets)	-	500	-
24.9(MECHANICAL STRENGTH For portable multiple and combined socket outlets (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	500	-
24.1(MECHANICAL STRENGTH For Plug (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	500	-
24.1(MECHANICAL STRENGTH For Plug (1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	500	-
24.11(MECHANICAL STRENGTH For portable socket-outlets having means for suspension on a wall)	-	500	-
24.12(MECHANICAL STRENGTH For portable socket-outlets having means for suspension on a wall)	-	500	-
24.13(MECHANICAL STRENGTH For portable socket-outlets having means for suspension on a wall)	-	500	-
24.14.1(MECHANICAL STRENGTH For fixed socket-outlets)	-	500	-
24.14.2(MECHANICAL STRENGTH For fixed socket-outlets)	-	500	-
24.14.3(MECHANICAL STRENGTH For plugs and portable socket-outlets)	-	500	-
24.15(MECHANICAL STRENGTH )	-	1000	-
24.16(MECHANICAL STRENGTH )	-	1000	-
24.16(MECHANICAL STRENGTH For shroud of portable socket-outlets)	-	1000	-
25.1(RESISTANCE TO HEAT Accessories and surface mounting boxes)	-	1000	-
25.2(RESISTANCE TO HEAT Parts of insulating material necessary to retain current-carrying parts of the earthing circuit in position, as well as parts of the front surface zone of thermoplastic material)	-	1000	-
25.3(RESISTANCE TO HEAT Parts of insulating material not necessary to retain current-carrying parts and parts of the earthing circuit in position, even though they are in contact with them)	-	1000	-
25.4(RESISTANCE TO HEAT )	-	1000	-
26.1(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	500	-
26.2(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	500	-
26.3(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	500	-
26.4(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	500	-
26.5(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	500	-
26.6(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	500	-
26.7(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	500	-
27.1(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	500	-
27.2(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	1000	-
27.3(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	1000	-
28.1.1(Resistance to Abnormal Heat and to Fire Glow-Wire Test)	-	1000	-
28.1.2(Resistance to Abnormal Heat and to Fire for plugs with pins provided with insulating sleeves)	-	1000	-
28.2(Resistance to Tracking For accessories other than IP code higher than IPX0 parts of insulating material retaining live parts in position)	-	1000	-
29(RESISTANCE TO RUSTING)	-	1000	-
30.1(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Pressure Test at High Temperature)	-	1000	-
30.2(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Static Damp Heat Test)	-	1000	-
30.3(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Tests at Low Temperature)	-	1000	-
30.4(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Impact Test at Low Temperature)	-	1000	-

15 Aug, 2028

-
-

7759

Alpha Test House Services LLP

IS 5522 (2014)

Stainless steel sheets and strips for utensils - Specification (Third Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.1 & 7.2 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 7.1 & 7.2 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 7.1 & 7.2 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 7.1 & 7.2 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 7.1 & 7.2 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 7.1 & 7.2 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 7.1 & 7.2 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 7.1 & 7.2 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
8.2, Table 3(Tensile Test-1608:Part 1)	-	1000	-
8.2, Table 3(Proof Stress, N/mm2)	-	1000	-
8.2, Table 3(Elongation, %)	-	500	-
8.3(Hardness , max-IS 1500 or IS 1501 (Part 1) or IS 1586)	-	1000	-
8.4(Bend Test)	-	200	-
8.5(Erichsen Cupping Test)	-	1800	-
10.1(Thickness, mm)	-	300	-
10.2(width, mm)	-	300	-
10.3(Length, mm)	-	200	-
10.4(Flatness,mm)	-	200	-
10.5(Camber, mm)	-	1000	-
11(Surface Finish)	-	75	-
Cl . 6 .0(Freedom from defect)	-	25	-
Cl. 7.1 & 7.2 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 7.1 & 7.2 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 7.1 & 7.2 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 7.1 & 7.2 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 7.1 & 7.2 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 7.1 & 7.2 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 7.1 & 7.2 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 7.1 & 7.2 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
8.2, Table 3(Tensile Test-1608:Part 1)	-	1000	-
8.2, Table 3(Proof Stress, N/mm2)	-	1000	-
8.2, Table 3(Elongation, %)	-	500	-
8.3(Hardness , max-IS 1500 or IS 1501 (Part 1) or IS 1586)	-	1000	-
8.4(Bend Test)	-	200	-
8.5(Erichsen Cupping Test)	-	1800	-
10.1(Thickness, mm)	-	300	-
10.2(width, mm)	-	300	-
10.3(Length, mm)	-	200	-
10.4(Flatness,mm)	-	200	-
10.5(Camber, mm)	-	1000	-
11(Surface Finish)	-	75	-
Cl . 6 .0(Freedom from defect)	-	25	-

31 Dec, 2026

-
Included w.e.f. 07.11.2023

7760

INDIAN TESTING LABORATORY PRIVATE LIMITED

IS 15778 (2007)

Chlorinated polyvinyl chloride (Cpvc) pipes for potable hot and cold water distribution supplies - Specification

Class I, II, III

95000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5 Table 1(Classification of pipes)	-	250	-
6.2.1 Annex B(Chloride Content of Resin)	-	2500	-
6.3(Compound Properties)	-	10000	-
6.3.1 Annex B(Chloride content)	-	2500	-
6.3.2 Annex C(Verification of the Malfunction Temperature, Tmal: )	-	5000	-
7.1 IS 12235 (Part 1) Table 2(Dimension of Pipes: Mean outside Diameter)	-	100	-
7.1,7.1.1 IS 12235 (Part 1) Table 2(Outside Diameter at any point)	-	1000	-
7.1.2 IS 12235 (Part 1) Table 2(Wall Thickness )	-	1000	-
7.1.3 (Effective length)	-	1000	-
8(Pipe Ends)	-	1000	-
9.1(Visual Appearance)	-	500	-
9.2 IS 12235 (Part 3)(Opacity)	-	1500	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (first extraction))	-	1500	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (third extraction))	-	1500	-
Cl. 9.3,IS 4985 Cl. 10.3(Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	1500	-
Cl. 9.3,IS 4985 Cl. 10.3(Cadmium (for all three extracts) )	-	1500	-
Cl. 9.3,IS 4985 Cl. 10.3(Mercury (for all three extracts) )	-	1500	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction) )	-	1500	-
9.4 IS 12235(Part 5/Sec 1 and Sec 2)(Reversion Test : When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.)	-	1500	-
9.5 IS 12235(Part 2)(Vicat Softening Temperature: When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen shall not be less than 110°C.)	-	1500	-
9.6 IS 12235(Part 14)(Density)	-	1500	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	30000	-
10.2 Table 3 IS 12235 (Part 8/Sec 1)(Thermal Stability by Hydrostatic Pressure Testing)	-	45000	-
10.3 IS 4985 Table 4(Resistance to External Blow at O°C: When tested by the method prescribed in IS 4985, with classified striker mass and drop height as given in Table 4, the pipe shall have a true impact rate of not more than 10 percent.)	-	2500	-
10.4 IS 12235(Part 19)(Flattening Test)	-	1500	-
10.5 IS 12235(Part 13)(Tensile Strength : When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C. )	-	2500	-
6.3.3(Density)	-	1000	-

15 Aug, 2028

-
-

7761

Alpha Test House Services LLP

IS 1079 (2017)

Hot rolled carbon steel sheet, plate and strip - Specification (Seventh Revision)

8100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Carbon %)	-	100	15% DISCOUNT TO BIS
6.1(Manganese %)	-	100	15% DISCOUNT TO BIS
6.1(Phosphorus %)	-	100	15% DISCOUNT TO BIS
6.1(Sulphur %)	-	100	15% DISCOUNT TO BIS
6.1(Silicon %)	-	100	15% DISCOUNT TO BIS
6.1( Copper %)	-	100	15% DISCOUNT TO BIS
6.1( Aluminium %)	-	100	15% DISCOUNT TO BIS
6.1( Nb)	-	100	15% DISCOUNT TO BIS
6.1(V)	-	100	15% DISCOUNT TO BIS
6.1( Ti)	-	100	15% DISCOUNT TO BIS
6.1(Cr)	-	100	15% DISCOUNT TO BIS
6.1(Mo)	-	100	15% DISCOUNT TO BIS
6.1(Ni)	-	100	15% DISCOUNT TO BIS
6.1( Nitrogen%)	-	1300	15% DISCOUNT TO BIS
Cl.13(Out of square)	-	300	15% DISCOUNT TO BIS
Cl.13(Flatness)	-	200	15% DISCOUNT TO BIS
Cl.13(Camber)	-	200	15% DISCOUNT TO BIS
Cl.13(Width)	-	200	15% DISCOUNT TO BIS
Cl.13(Thickness)	-	200	15% DISCOUNT TO BIS
Cl. 8.3, Cl. 8.3.1 Table 5 and Table 6(Percentage Elongation After Fracture at 5.65√A Gauge length)	-	500	15% DISCOUNT TO BIS
Cl. 8.3, Cl. 8.3.1 Table 5 and Table 6(Percentage Elongation After Fracture at 80 mm Gauge length)	-	500	15% DISCOUNT TO BIS
Cl. 8.3, Cl. 8.3.1 Table 5 and Table 6(Percentage Elongation After Fracture at 50 mm Gauge length)	-	500	15% DISCOUNT TO BIS
Cl. 8.3, Cl. 8.3.1 Table 6(0.2% Proof Stress/Yield Stress)	-	500	15% DISCOUNT TO BIS
Cl 13(Length, Width & Thickness)	-	500	15% DISCOUNT TO BIS
Cl 12(Workmanship)	-	200	15% DISCOUNT TO BIS
Cl 10(Die Press)	-	400	15% DISCOUNT TO BIS
9(Bend test)	-	500	15% DISCOUNT TO BIS
14(Calculation of weight)	-	200	15% DISCOUNT TO BIS
8, Table 5 & 6(Tensile Strength)	-	1000	15% DISCOUNT TO BIS
8, Table 5 & 6(Yield Strength)	-	1000	15% DISCOUNT TO BIS
8, Table 5 & 6(Elongation)	-	500	15% DISCOUNT TO BIS
Clause 10(Cuppping Test)	-	400	15% DISCOUNT TO BIS
Clause 12(Freedom from defect)	-	200	15% DISCOUNT TO BIS
Clause 7, Table 3, Note 1(Boron)	-	100	15% DISCOUNT TO BIS
Clause 7, Table 3, Note 1(B+Ti+Nb+V)	-	100	15% DISCOUNT TO BIS
6.1(Carbon %)	-	100	15% DISCOUNT TO BIS
6.1(Manganese %)	-	100	15% DISCOUNT TO BIS
6.1(Phosphorus %)	-	100	15% DISCOUNT TO BIS
6.1(Sulphur %)	-	100	15% DISCOUNT TO BIS
6.1(Silicon %)	-	100	15% DISCOUNT TO BIS
6.1( Copper %)	-	100	15% DISCOUNT TO BIS
6.1( Aluminium %)	-	100	15% DISCOUNT TO BIS
6.1( Nb)	-	100	15% DISCOUNT TO BIS
6.1(V)	-	100	15% DISCOUNT TO BIS
6.1( Ti)	-	100	15% DISCOUNT TO BIS
6.1(Cr)	-	100	15% DISCOUNT TO BIS
6.1(Mo)	-	100	15% DISCOUNT TO BIS
6.1(Ni)	-	100	15% DISCOUNT TO BIS
6.1( Nitrogen%)	-	1300	15% DISCOUNT TO BIS
Cl.13(Out of square)	-	300	15% DISCOUNT TO BIS
Cl.13(Flatness)	-	200	15% DISCOUNT TO BIS
Cl.13(Camber)	-	200	15% DISCOUNT TO BIS
Cl.13(Width)	-	200	15% DISCOUNT TO BIS
Cl.13(Thickness)	-	200	15% DISCOUNT TO BIS
Cl. 8.3, Cl. 8.3.1 Table 5 and Table 6(Percentage Elongation After Fracture at 5.65√A Gauge length)	-	500	15% DISCOUNT TO BIS
Cl. 8.3, Cl. 8.3.1 Table 5 and Table 6(Percentage Elongation After Fracture at 80 mm Gauge length)	-	500	15% DISCOUNT TO BIS
Cl. 8.3, Cl. 8.3.1 Table 5 and Table 6(Percentage Elongation After Fracture at 50 mm Gauge length)	-	500	15% DISCOUNT TO BIS
Cl. 8.3, Cl. 8.3.1 Table 6(0.2% Proof Stress/Yield Stress)	-	500	15% DISCOUNT TO BIS
Cl 13(Length, Width & Thickness)	-	500	15% DISCOUNT TO BIS
Cl 12(Workmanship)	-	200	15% DISCOUNT TO BIS
Cl 10(Die Press)	-	400	15% DISCOUNT TO BIS
9(Bend test)	-	500	15% DISCOUNT TO BIS
14(Calculation of weight)	-	200	15% DISCOUNT TO BIS
8, Table 5 & 6(Tensile Strength)	-	1000	15% DISCOUNT TO BIS
8, Table 5 & 6(Yield Strength)	-	1000	15% DISCOUNT TO BIS
8, Table 5 & 6(Elongation)	-	500	15% DISCOUNT TO BIS
Clause 10(Cuppping Test)	-	400	15% DISCOUNT TO BIS
Clause 12(Freedom from defect)	-	200	15% DISCOUNT TO BIS
Clause 7, Table 3, Note 1(Boron)	-	100	15% DISCOUNT TO BIS
Clause 7, Table 3, Note 1(B+Ti+Nb+V)	-	100	15% DISCOUNT TO BIS
6.1(Carbon %)	-	100	15% DISCOUNT TO BIS
6.1(Manganese %)	-	100	15% DISCOUNT TO BIS
6.1(Phosphorus %)	-	100	15% DISCOUNT TO BIS
6.1(Sulphur %)	-	100	15% DISCOUNT TO BIS
6.1(Silicon %)	-	100	15% DISCOUNT TO BIS
6.1( Copper %)	-	100	15% DISCOUNT TO BIS
6.1( Aluminium %)	-	100	15% DISCOUNT TO BIS
6.1( Nb)	-	100	15% DISCOUNT TO BIS
6.1(V)	-	100	15% DISCOUNT TO BIS
6.1( Ti)	-	100	15% DISCOUNT TO BIS
6.1(Cr)	-	100	15% DISCOUNT TO BIS
6.1(Mo)	-	100	15% DISCOUNT TO BIS
6.1(Ni)	-	100	15% DISCOUNT TO BIS
6.1( Nitrogen%)	-	1300	15% DISCOUNT TO BIS
Cl.13(Out of square)	-	300	15% DISCOUNT TO BIS
Cl.13(Flatness)	-	200	15% DISCOUNT TO BIS
Cl.13(Camber)	-	200	15% DISCOUNT TO BIS
Cl.13(Width)	-	200	15% DISCOUNT TO BIS
Cl.13(Thickness)	-	200	15% DISCOUNT TO BIS
Cl. 8.3, Cl. 8.3.1 Table 5 and Table 6(Percentage Elongation After Fracture at 5.65√A Gauge length)	-	500	15% DISCOUNT TO BIS
Cl. 8.3, Cl. 8.3.1 Table 5 and Table 6(Percentage Elongation After Fracture at 80 mm Gauge length)	-	500	15% DISCOUNT TO BIS
Cl. 8.3, Cl. 8.3.1 Table 5 and Table 6(Percentage Elongation After Fracture at 50 mm Gauge length)	-	500	15% DISCOUNT TO BIS
Cl. 8.3, Cl. 8.3.1 Table 6(0.2% Proof Stress/Yield Stress)	-	500	15% DISCOUNT TO BIS
Cl 13(Length, Width & Thickness)	-	500	15% DISCOUNT TO BIS
Cl 12(Workmanship)	-	200	15% DISCOUNT TO BIS
Cl 10(Die Press)	-	400	15% DISCOUNT TO BIS
9(Bend test)	-	500	15% DISCOUNT TO BIS
14(Calculation of weight)	-	200	15% DISCOUNT TO BIS
8, Table 5 & 6(Tensile Strength)	-	1000	15% DISCOUNT TO BIS
8, Table 5 & 6(Yield Strength)	-	1000	15% DISCOUNT TO BIS
8, Table 5 & 6(Elongation)	-	500	15% DISCOUNT TO BIS
Clause 10(Cuppping Test)	-	400	15% DISCOUNT TO BIS
Clause 12(Freedom from defect)	-	200	15% DISCOUNT TO BIS
Clause 7, Table 3, Note 1(Boron)	-	100	15% DISCOUNT TO BIS
Clause 7, Table 3, Note 1(B+Ti+Nb+V)	-	100	15% DISCOUNT TO BIS

31 Dec, 2026

-
-

7762

INDIAN TESTING LABORATORY PRIVATE LIMITED

IS 12786 (1989)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification

CLASS I, II & III

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.b(Potyethylene - anti-oxidant)	-	2500	-
4.1.c.i (Density)	-	1000	-
4.1.c.ii (Toluene extract - Annex A)	-	1500	-
4.1.c.iii (Volatile matter - Annex B )	-	1500	-
4.1.c & 4.2.a (Carbon Black content - IS 2530 : 1963)	-	1500	-
4.2.b (The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	1000	-
4.3(Addition of not more than 10 percent of the manufactures own rework material produced during the manufacture and works testing of pipe complying with this standard is permitted. No other rework material shall be used)	-	500	-
7.3(Tensile Test)	-	1500	-
7.3(Elongation at Break)	-	1000	-
7.4(SusceptibiIity to Environmental Stress Cracking)	-	2500	-
5 and Table 1(DIMENSIONS OF PIPES - outside diameters)	-	500	-
5 and Table 1(DIMENSIONS OF PIPES - wall thickness shall)	-	500	-
7.2(Reversion Test)	-	1500	-
Cl. 7.1 Table -2(Acceptance Test for 1 hrs @ 27 c & 6.9 Mpa)	-	2500	-
6.1(Visual Appearance)	-	500	-
3.1(Class of Pipe)	-	500	-
9.0 (9.1)(Minimum Internal Diameter of Coil)	-	500	-
8.0 (8.1) (Supply of pipes )	-	250	-
7.1 Table-2 (Hydraulic Characteristics a)Quality Test for 100 hours at 70°C & 2.5.MPa induced stress. )	-	5000	-
4.1.c(iv)(MATERIAL)	-	250	-
4.1d(MATERIAL)	-	250	-
4.2a(Carbon Black Content)	-	750	-

15 Aug, 2028

-
-

7763

INDIAN TESTING LABORATORY PRIVATE LIMITED

IS 14885 (2001)

Polyethylene pipes for the supply of gaseous fuels - Specification

SDR 17.6,13.6,11.0,9 GROUP I-III PE 80&PE 100

105000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.4(Colour)	-	250	-
Table-2, 5.1(Conventional Density, IS 7328:1992)	-	1500	-
Table-2, 5.1(Melt Flow Rate, IS 2530:1963)	-	2500	-
Table-2, 5.1(Thermal Staibility, Annex-D)	-	7500	-
Table-2, 5.1(Resistance to gas constituents, Cl 5.5)	-	10000	-
Table-2, 5.1(Pigment dispersion, Annex-E)	-	1500	-
5.2(Anti Oxidant: Cl. 17 of IS 2530)	-	5000	-
5.3(U.V.Stabilizer)	-	10000	-
6.1, Table-3(Ovality Pipe, Cl 6.3.2)	-	500	-
6.1, Table-3(Nominal Outside Diameter of Pipes , Cl 6.3.1)	-	500	-
6.2.1, Table-4(Minimum Wall Thickness, Cl.6.3, Cl.6.2.1.1, Table-5)	-	500	-
6.4(Length of pipe)	-	500	-
7, Table-6(Maximmn Out of Square of Each Pipe End)	-	500	-
8.1(Hydraulic Charactristics, Annex-A)	-	45000	-
8.2(Reversion Test. Annex-C)	-	1500	-
8.3(Density, Annex A of IS 7328)	-	1500	-
8.4(Melt Flow Rate (MFR), IS 2530)	-	1500	-
8.5(Thermal Stability to Oxidation, Annex-D)	-	5000	-
8.7(Tensile yield strength, Annex-J)	-	2500	-
8.7(Elongation at break, Annex-J)	-	1500	-
8.8(Resistance to Weathering, Annex-F)	-	10000	-
8.9(Squeeze off, Annex-G)	-	10000	-
8.6 & Table-2(Volatile Content: Annex-H of IS 14885)	-	5000	-
10(Marking)	-	250	-

15 Aug, 2028

-
-

7764

Alpha Test House Services LLP

IS 513 : Part 1 (2016)

Cold reduced carbon steel sheet and strip: Part 1 cold forming and drawing purpose (Sixth Revision)

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.0(ALUMINIUM)	-	100	15% DISCOUNT TO BIS
7.0(MICRO ALLOYS)	-	100	15% DISCOUNT TO BIS
7.0(NITROGEN)	-	200	15% DISCOUNT TO BIS
7.0(SILICON)	-	100	15% DISCOUNT TO BIS
7.0(MANGANESE)	-	100	15% DISCOUNT TO BIS
7.0(PHOSPHORUS)	-	100	15% DISCOUNT TO BIS
7.0(SULPHUR)	-	100	15% DISCOUNT TO BIS
7.0(CARBON)	-	200	15% DISCOUNT TO BIS
Cl. 11(Out of square)	-	100	15% DISCOUNT TO BIS
Cl. 11(Flatness)	-	100	15% DISCOUNT TO BIS
Cl. 11(Camber)	-	100	15% DISCOUNT TO BIS
Cl. 11(Width)	-	100	15% DISCOUNT TO BIS
Cl. 11(Thickness)	-	100	15% DISCOUNT TO BIS
Cl. 8.7(Bake Hardening Index)	-	150	15% DISCOUNT TO BIS
Cl. 8.6 Table 5A, 5B & 5C(Tensile Strain Hardening Component (n-Value))	-	150	15% DISCOUNT TO BIS
Cl. 8.5 Table 5A, 5B & 5C(Plastic Strain Ratio (r bar/r-90))	-	150	15% DISCOUNT TO BIS
Cl. 8.4(Bend Test)	-	940	15% DISCOUNT TO BIS
Cl. 8.3 Table 6(Hardness Test ( Only for CR0 & CR1))	-	500	15% DISCOUNT TO BIS
Cl. 8.2(Cupping Test(Only for sheet and coils CR2, CR3, CR4(having thickness 0.5 mm-2.0 mm))	-	1000	15% DISCOUNT TO BIS
Cl. 8.1 & Table 5A, 5B & 5C(Elongation at 80 mm gauge length)	-	700	15% DISCOUNT TO BIS
Cl. 8.1 & Table 5A, 5B & 5C(Elongation at 50 mm gauge length)	-	700	15% DISCOUNT TO BIS
Cl. 8.1 & Table 5A, 5B & 5C(Yield Stress)	-	700	15% DISCOUNT TO BIS
Cl. 9 Table 8(Surface roughness)	-	500	15% DISCOUNT TO BIS
Cl 10(Workmanship)	-	250	15% DISCOUNT TO BIS
Cl 9.6(Workmanship)	-	250	15% DISCOUNT TO BIS
Cl. 11(Out of square)	-	100	15% DISCOUNT TO BIS
Cl. 11(Flatness)	-	100	15% DISCOUNT TO BIS
Cl. 11(Camber)	-	100	15% DISCOUNT TO BIS
Cl. 11(Width)	-	100	15% DISCOUNT TO BIS
Cl. 11(Thickness)	-	100	15% DISCOUNT TO BIS
Cl. 8.7(Bake Hardening Index)	-	150	15% DISCOUNT TO BIS
Cl. 8.6 Table 5A, 5B & 5C(Tensile Strain Hardening Component (n-Value))	-	150	15% DISCOUNT TO BIS
Cl. 8.5 Table 5A, 5B & 5C(Plastic Strain Ratio (r bar/r-90))	-	150	15% DISCOUNT TO BIS
Cl. 8.4(Bend Test)	-	940	15% DISCOUNT TO BIS
Cl. 8.3 Table 6(Hardness Test ( Only for CR0 & CR1))	-	500	15% DISCOUNT TO BIS
Cl. 8.2(Cupping Test(Only for sheet and coils CR2, CR3, CR4(having thickness 0.5 mm-2.0 mm))	-	1000	15% DISCOUNT TO BIS
Cl. 8.1 & Table 5A, 5B & 5C(Elongation at 80 mm gauge length)	-	700	15% DISCOUNT TO BIS
Cl. 8.1 & Table 5A, 5B & 5C(Elongation at 50 mm gauge length)	-	700	15% DISCOUNT TO BIS
Cl. 8.1 & Table 5A, 5B & 5C(Yield Stress)	-	700	15% DISCOUNT TO BIS
Cl. 9 Table 8(Surface roughness)	-	500	15% DISCOUNT TO BIS
Cl 10(Workmanship)	-	250	15% DISCOUNT TO BIS
Cl 9.6(Workmanship)	-	250	15% DISCOUNT TO BIS

31 Dec, 2026

-
Included w.e.f. 07.11.2023

7765

BIS, Eastern Regional Laboratory (ERL)

IS 4431 (1978)

Specification for carbon and carbon manganese free cutting steels (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 6 (Carbon)	-
Cl. 6 (Sulphur)	-
Cl. 6 (Phosphorus)	-
Cl. 6 (Manganese)	-
Cl. 6 (Silicon)	-
Cl. 6 (Nickel)	-
Cl. 6 (Copper)	-
Cl. 6 (Molybdenum)	-
Cl. 6 (Chromium)	-
5 (Freedom from defectes)	-
8.1 (Tensile strength)	-
8.1 (Elongation)	-
8.1 (Izod Impact)	-
9 (Diameter)	-
9 (Out of Round)	-
9 (Straightness)	-

-
Excluding Vanadium

7766

INDIAN TESTING LABORATORY PRIVATE LIMITED

IS 12818 (2010)

Unplasticized polyvinyl chloride (Pvc - U) screen and casing pipes for bore/tubewells - Specification (Second Revision)

RMS,RDS,PMS,PDS,CS,CM,CD

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.6(Vicat Softening Temperature IS 12235 (Part 2).)	-	1500	-
9.5(Tensile Strength IS 12235(Part 13))	-	1500	-
9.4 and Table 14(Resistance to External Blows at 0 ?C IS 12235 (Part 9))	-	1500	-
9.3(Density IS 12235 (Part 14))	-	1000	-
9.2(Internal Diameter)	-	1000	-
9.1( Visual Appearance)	-	500	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	1000	-
8.4(Sealing rings - Hardness)	-	750	-
8.1 to 8.3 and Table 11 &12 Fig 3A & 4A(THREADING OF SCREEN ANDCASING PIPES. IS 554.)	-	1500	-
7.5 and Table 10 Fig 2A & 2B(Approximate Free Passage Area, in Percent (Mean Value) for Width of Slot (w))	-	250	-
7.5 and Table 10 Fig 2A & 2B(Minimum number of slots on the circumference of the cross-section.)	-	250	-
7.5 and Table 10 Fig 2A & 2B(Summation of slot lengths over internal circumference of the cross- section.)	-	250	-
7.4 Table 8 & 9 Fig 1(Segmental length, l5)	-	250	-
7.4 Table 8 & 9 Fig 1(Segmental length, l4)	-	250	-
7.4 Table 8 & 9 Fig 1(Segmental length, l3)	-	250	-
7.4 Table 8 & 9 Fig 1(Effective length, l2)	-	250	-
7.3.2(Rib height)	-	250	-
7.3.1(No.of Ribs)	-	250	-
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Max)	-	250	-
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Min)	-	250	-
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter over Connection)	-	250	-
7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point, Max)	-	250	-
7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point , Min)	-	250	-
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe , Max)	-	250	-
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe, Min)	-	250	-
7.2 and Table 5, 6 & 7 Fig 1B(Nominal Diameter)	-	250	-
4.1.2(K-Value as per IS-4669)	-	1500	-
4.1.1 (Ref. 3.4.1. of IS 10151)(Composition - The monomer content (VCM content) in the resin - Annex A ofIS 10151)	-	4000	-
5(COLOUR)	-	250	-
9.7(Effect on Water a) Lead (first extraction) b) Lead (Third extraction) c) Dialkyl Tin C4 & higher homologues measured as Tin (Third extraction) d) Cadmium (All three extracts) e) Mercury (All three extracts) f) Other Toxic Substances )	-	4500	-
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Wall thickness)	-	250	-
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Mean Outer Diameter over Connection)	-	250	-
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Outer Diameter at any point )	-	250	-
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Mean Outer Diameter of Pipe)	-	250	-
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Nominal Diameter)	-	250	-
11(Marking)	-	250	-

15 Aug, 2028

-
-

7767

BIS Patna Branch Laboratory (PBL)

IS 4985 (2021)

UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES SPECIFICATION Fourth Revision

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
10.1 (Colour)	-
10.1 (Surface Finish)	-
10.7 (Sulphated Ash Content)	-
7.2.1.1 Table3 (Angle of taper (Note-1))	-
7.1.1.1 (DIMENSIONS-PIPE-Mean O.D. (Minimum))	-
7.1.1.1 (DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-
7.1.1.1 (DIMENSIONS-PIPE-Mean O.D. Variation)	-
7.1.1.2 (DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-
7.1.1.2 (DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-
7.1.1.2 (DIMENSIONS-PIPE-Ovality (Maximum))	-
7.1.2.1 (DIMENSIONS-PIPE-Thickness(Minimum))	-
7.1.2.1 (DIMENSIONS-PIPE-Thickness(Maximum))	-
7.1.2.1 (DIMENSIONS-PIPE-Average Thickness)	-
7.2.1.1-Table 3 (DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-
7.2.1.1-Table 3 (DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum))	-
7.2.1.1-Table 3 (DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum))	-
7.2.1.2(a)-Table 5 (DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement)	-
7.2.1.2-Table 4 (DIMENSIONS-Sockets for elastomeric sealing ring joints-Socket inner Diameter)	-
9.1 (PIPE ENDS)	-
10.1 (PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-
10.1.1 (PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-
10.4 (PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-
10.6 (PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-
7.1.3 (mean outside diameter, outside diameter at any point, and wall thickness of plumbing pipes)	-
7.1.4 (Length)	-
10.5 (PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-
11.2 (Resistance to External Blows at 0°C)	-
10.2 (PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-

-
All test facilities are available as per the IS except- i. Sealing Ring (Clause 8) ii. Hydrostatic Chracteristics (Clause 11.1) iii. Effect On Water (Clause10.3) iv. Reversion test (Clause10.4)

7768

BIS, Bengaluru Branch Laboratory (BNBL)

IS 9873 : Part 3 (2020)

Safety of Toys Part 3 Migration of Certain Elements ( Third Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 - Table 1 (Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-

-
test facility not available for Pthalates

7769

Alpha Test House Services LLP

IS 10748 (2004)

Hot - Rolled steel strip for welded tubes and pipes - Specification (Second Revision)

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8 & Table 3(UTM)	-	2500	15% DISCOUNT TO BIS
Cl 9(Press)	-	1000	15% DISCOUNT TO BIS
Cl 11(Workmanship)	-	200	15% DISCOUNT TO BIS
Cl 12 & 13(Length, Width & Thickness)	-	200	15% DISCOUNT TO BIS
7.1(Carbon %)	-	200	15% DISCOUNT TO BIS
7.1(Manganese %)	-	200	15% DISCOUNT TO BIS
7.1(Phosphorus %)	-	200	15% DISCOUNT TO BIS
7.1(Sulphur %)	-	200	15% DISCOUNT TO BIS
7.1(Silicon %)	-	200	15% DISCOUNT TO BIS
7.1( Copper %)	-	200	15% DISCOUNT TO BIS
7.1( Aluminium %)	-	200	15% DISCOUNT TO BIS
7.1( Nb)	-	200	15% DISCOUNT TO BIS
7.1(V)	-	200	15% DISCOUNT TO BIS
7.1( Ti)	-	200	15% DISCOUNT TO BIS
7.1(Cr)	-	200	15% DISCOUNT TO BIS
7.1(Mo)	-	200	15% DISCOUNT TO BIS
7.1(Ni)	-	200	15% DISCOUNT TO BIS
7.1( Nitrogen%)	-	200	15% DISCOUNT TO BIS
7.1(CE)	-	200	15% DISCOUNT TO BIS
Table 1 ( Clauses 7.1 ,7.2 )(TITANIUM)	-	200	15% DISCOUNT TO BIS
Table 1 ( Clauses 7.1 ,7.2 )(VANADIUM)	-	200	15% DISCOUNT TO BIS
Table 1 ( Clauses 7.1 ,7.2 )(NIOBIUM)	-	200	15% DISCOUNT TO BIS
Table 1 ( Clauses 7.1 ,7.2 )(CARBON EQUIVELENT )	-	200	15% DISCOUNT TO BIS
Table 1 ( Clauses 7.1 ,7.2 )(Molybdenum)	-	200	15% DISCOUNT TO BIS
Table 1 ( Clauses 7.1 ,7.2 )(Chromium)	-	200	15% DISCOUNT TO BIS
Table 1 ( Clauses 7.1 ,7.2 )(Nickel)	-	200	15% DISCOUNT TO BIS
Table 1 ( Clauses 7.1 ,7.2 )( ALUMINIUM)	-	200	15% DISCOUNT TO BIS
Table 1 ( Clauses 7.1 ,7.2 )(SILICON)	-	200	15% DISCOUNT TO BIS
Table 1 ( Clauses 7.1 ,7.2 )(NITROGEN)	-	100	15% DISCOUNT TO BIS
Table 1 ( Clauses 7.1 ,7.2 )(MANGANESE)	-	100	15% DISCOUNT TO BIS
Table 1 ( Clauses 7.1 ,7.2 )(PHOSPHURS)	-	100	15% DISCOUNT TO BIS
Table 1 ( Clauses 7.1 ,7.2 )(SULPHUR)	-	100	15% DISCOUNT TO BIS
Table 1 ( Clauses 7.1 ,7.2 )( CARBON)	-	100	15% DISCOUNT TO BIS
Cl. 14(Weight)	-	100	15% DISCOUNT TO BIS
Cl. 12, 13(Camber)	-	100	15% DISCOUNT TO BIS
Cl. 12, 13(Thickness)	-	100	15% DISCOUNT TO BIS
Cl. 8, Table 3(Elongation)	-	1000	15% DISCOUNT TO BIS
Cl. 8, Table 3(Yield Stress)	-	1000	15% DISCOUNT TO BIS
Cl 8 & Table 3(UTM)	-	2500	15% DISCOUNT TO BIS
Cl 9(Press)	-	1000	15% DISCOUNT TO BIS
Cl 11(Workmanship)	-	200	15% DISCOUNT TO BIS
Cl 12 & 13(Length, Width & Thickness)	-	200	15% DISCOUNT TO BIS
7.1(Carbon %)	-	200	15% DISCOUNT TO BIS
7.1(Manganese %)	-	200	15% DISCOUNT TO BIS
7.1(Phosphorus %)	-	200	15% DISCOUNT TO BIS
7.1(Sulphur %)	-	200	15% DISCOUNT TO BIS
7.1(Silicon %)	-	200	15% DISCOUNT TO BIS
7.1( Copper %)	-	200	15% DISCOUNT TO BIS
7.1( Aluminium %)	-	200	15% DISCOUNT TO BIS
7.1( Nb)	-	200	15% DISCOUNT TO BIS
7.1(V)	-	200	15% DISCOUNT TO BIS
7.1( Ti)	-	200	15% DISCOUNT TO BIS
7.1(Cr)	-	200	15% DISCOUNT TO BIS
7.1(Mo)	-	200	15% DISCOUNT TO BIS
7.1(Ni)	-	200	15% DISCOUNT TO BIS
7.1( Nitrogen%)	-	200	15% DISCOUNT TO BIS
7.1(CE)	-	200	15% DISCOUNT TO BIS
Cl. 14(Weight)	-	100	15% DISCOUNT TO BIS
Cl. 12, 13(Camber)	-	100	15% DISCOUNT TO BIS
Cl. 12, 13(Thickness)	-	100	15% DISCOUNT TO BIS
Cl. 8, Table 3(Elongation)	-	1000	15% DISCOUNT TO BIS
Cl. 8, Table 3(Yield Stress)	-	1000	15% DISCOUNT TO BIS
8.0 (1)(Tensile Strength-IS:1608(P1))	-	1100	15% DISCOUNT TO BIS
15.0 & 15.1(Coil edges - IS:10748)	-	100	15% DISCOUNT TO BIS
15.0 & 15.2(Surface finish - IS:10748)	-	100	15% DISCOUNT TO BIS
15.0 & 15.5(Telescopicity - IS:10748)	-	100	15% DISCOUNT TO BIS
15(Condition of Coil)	-	100	15% DISCOUNT TO BIS

31 Dec, 2026

-
-

7770

Alpha Test House Services LLP

IS 1239 : Part 2 (2011)

Steel tubes, tubulars and other steel fittings - Specification: Part 2 steel pipe fittings (Fifth Revision)

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Chemical Composition - Sulphur - Laddle Analysis IS 228)	-	1000	15% DISCOUNT TO BIS
7.1(Chemical Composition - Phosphorus - Laddle Analysis IS 228)	-	1000	15% DISCOUNT TO BIS
8.1-Table 1( DIMENSIONS OF TUBULARS-Pieces )	-	20	15% DISCOUNT TO BIS
8.2-Table-2( DIMENSIONS OF TUBULARS-Nipples )	-	20	15% DISCOUNT TO BIS
8.2-Table-2( DIMENSIONS OF TUBULARS-Nipples-A )	-	20	15% DISCOUNT TO BIS
8.2-Table-2( DIMENSIONS OF TUBULARS-Nipples-B )	-	20	15% DISCOUNT TO BIS
8.2-Table-2( DIMENSIONS OF TUBULARS-Nipples-C )	-	20	15% DISCOUNT TO BIS
8.3.1-Table 3(DIMENSIONS OF TUBULARS-Longscrews (Connectors))	-	20	15% DISCOUNT TO BIS
8.3.1-Table 3(DIMENSIONS OF TUBULARS-Longscrews (Connectors)-A)	-	20	15% DISCOUNT TO BIS
8.3.1-Table 3(DIMENSIONS OF TUBULARS-Longscrews (Connectors)-B)	-	20	15% DISCOUNT TO BIS
8.3.1-Table 3(DIMENSIONS OF TUBULARS-Longscrews (Connectors)-C)	-	20	15% DISCOUNT TO BIS
8.3.2(DIMENSIONS OF TUBULARS-Longscrews (Connectors))	-	20	15% DISCOUNT TO BIS
8.3.2(DIMENSIONS OF TUBULARS-Longscrews (Connectors)-The face of the back nut angle)	-	20	15% DISCOUNT TO BIS
8.4.1 -Table 4(Bends and springs)	-	20	15% DISCOUNT TO BIS
8.4.1 -Table 4(Bends and springs-A)	-	20	15% DISCOUNT TO BIS
8.4.1 -Table 4(Bends and springs-B)	-	20	15% DISCOUNT TO BIS
8.4.1 -Table 4(Bends and springs-R)	-	20	15% DISCOUNT TO BIS
8.4.1 -Table 4(Bends and springs-C)	-	20	15% DISCOUNT TO BIS
8.4.1 -Table 4(Bends and springs-D)	-	20	15% DISCOUNT TO BIS
8.4.1 -Table 4(Bends and springs-E)	-	20	15% DISCOUNT TO BIS
8.5-Table 5( Return Bends)	-	20	15% DISCOUNT TO BIS
8.5-Table 5( Return Bends-A)	-	20	15% DISCOUNT TO BIS
8.5-Table 5( Return Bends-B)	-	20	15% DISCOUNT TO BIS
8.6 -Table 6(Sockets)	-	20	15% DISCOUNT TO BIS
8.6 -Table 6(Sockets-A)	-	20	15% DISCOUNT TO BIS
8.6 -Table 6(Sockets-B)	-	20	15% DISCOUNT TO BIS
8.6 -Table 6(Maximum Inside Diameter of Internal Parallel Thread)	-	20	15% DISCOUNT TO BIS
9(DIMENSIONS OF STEEL FITTINGS (OTHER THAN TUBULARS))	-	20	15% DISCOUNT TO BIS
9.1-Table 7(Dimensions of Screwed Ends of Fittings-D )	-	20	15% DISCOUNT TO BIS
9.1-Table 7(Dimensions of Screwed Ends of Fittings-E )	-	20	15% DISCOUNT TO BIS
9.1-Table 7(Dimensions of Screwed Ends of Fittings-d )	-	20	15% DISCOUNT TO BIS
9.1-Table 7(Dimensions of Screwed Ends of Fittings-Taper )	-	20	15% DISCOUNT TO BIS
9.1-Table 8 (Dimensions of Elbows, Tees and Crosses, Equal-A)	-	20	15% DISCOUNT TO BIS
9.1-Table 9 (Dimensions of Elbows Reducing-A)	-	20	15% DISCOUNT TO BIS
9.1-Table 9 (Dimensions of Elbows Reducing-B)	-	20	15% DISCOUNT TO BIS
9.1-Table 10 (Dimensions of Tees, Reducing (on the Branch)-A)	-	20	15% DISCOUNT TO BIS
9.1-Table 10 (Dimensions of Tees, Reducing (on the Branch)-B)	-	20	15% DISCOUNT TO BIS
9.1-Table 11 (Dimensions of Tees, Reducing (on the Run and Branch, or on the Run Only)-A)	-	20	15% DISCOUNT TO BIS
9.1-Table 11 (Dimensions of Tees, Reducing (on the Run and Branch, or on the Run Only)-B)	-	20	15% DISCOUNT TO BIS
9.1-Table 12(Dimensions of Tees (Increasing on the Branch)-A)	-	20	15% DISCOUNT TO BIS
9.1-Table 12(Dimensions of Tees (Increasing on the Branch)-B)	-	20	15% DISCOUNT TO BIS
9.1-Table 13( Dimensions of Crosses, Reducing-A)	-	20	15% DISCOUNT TO BIS
9.1-Table 13( Dimensions of Crosses, Reducing-B)	-	20	15% DISCOUNT TO BIS
9.1-Table 14( Elbows, Tees and Crosses, Side Outlet, Equal-A)	-	20	15% DISCOUNT TO BIS
9.1-Table 14( Elbows, Tees and Crosses, Side Outlet, Equal-B)	-	20	15% DISCOUNT TO BIS
9.1-Table 15( Dimensions of Elbows, Round, Male and Female, Equal-A)	-	20	15% DISCOUNT TO BIS
9.1-Table 15( Dimensions of Elbows, Round, Male and Female, Equal-B)	-	20	15% DISCOUNT TO BIS
9.1-Table 15( Dimensions of Elbows, Round, Male and Female, Equal-Minimum Bore of Male End)	-	20	15% DISCOUNT TO BIS
9.1-Table 15( Dimensions of Elbows, Round, Male and Female, Equal-Maximum Bore of Male End)	-	20	15% DISCOUNT TO BIS
9.1-Table 16( Dimensions of Elbows, Equal, 135°-A)	-	20	15% DISCOUNT TO BIS
9.1-Table 17 (Dimensions of Y-Pieces, Female, Equal-A)	-	20	15% DISCOUNT TO BIS
9.1-Table 18 (Dimensions of Socket, Reducing-A)	-	20	15% DISCOUNT TO BIS
9.1-Table 19 (Dimensions of Caps-A)	-	20	15% DISCOUNT TO BIS
9.1-Table 19 (Dimensions of Caps-T)	-	20	15% DISCOUNT TO BIS
9.1-Table 20(Dimensions of Plug-Minimum Length of Thread for Basic Gauge)	-	20	15% DISCOUNT TO BIS
9.1-Table 20(Dimensions of Plug-Minimum Length of Thread for Basic Gauge-S)	-	10	15% DISCOUNT TO BIS
9.1-Table 20(Dimensions of Plug-Minimum Length of Thread for Basic Gauge-D)	-	10	15% DISCOUNT TO BIS
9.1-Table 20(Dimensions of Plug-Minimum Length of Thread for Basic Gauge-K)	-	10	15% DISCOUNT TO BIS
9.1-Table 21 (Dimensions of Elbows, Tees and Crosses, Male, Equal-A)	-	10	15% DISCOUNT TO BIS
9.1-Table 22(Dimensions of Y-Pieces and Angle Tees, Male, Equal-A )	-	10	15% DISCOUNT TO BIS
9.1-Table 22(Dimensions of Y-Pieces and Angle Tees, Male, Equal-B )	-	10	15% DISCOUNT TO BIS
9.1-Table 23( Dimensions of Twin Elbows and Sweep Tees, Male, Equal-B)	-	10	15% DISCOUNT TO BIS
9.1-Table 24(Dimensions of Socket Unions-A )	-	10	15% DISCOUNT TO BIS
9.1-Table 25 (Dimensions of Pipe Unions-A)	-	10	15% DISCOUNT TO BIS
9.1-Table 26 (Dimensions of Union Bends-A )	-	10	15% DISCOUNT TO BIS
9.1-Table 26 (Dimensions of Union Bends-B )	-	10	15% DISCOUNT TO BIS
9.1-Table 27 (Dimensions of Hexagon Bushes-L)	-	10	15% DISCOUNT TO BIS
9.1-Table 27 (Dimensions of Hexagon Bushes-T)	-	10	15% DISCOUNT TO BIS
9.1-Table 27 (Dimensions of Hexagon Bushes-A)	-	10	15% DISCOUNT TO BIS
9.1-Table 27 (Dimensions of Hexagon Bushes-B)	-	10	15% DISCOUNT TO BIS
9.1-Table 28 (Dimensions of Nipples, Hexagon, Equal-L)	-	10	15% DISCOUNT TO BIS
9.1-Table 28 (Dimensions of Nipples, Hexagon, Equal-T)	-	10	15% DISCOUNT TO BIS
9.1-Table 28 (Dimensions of Nipples, Hexagon, Equal-A)	-	10	15% DISCOUNT TO BIS
9.1-Table 28 (Dimensions of Nipples, Hexagon, Equal-C)	-	10	15% DISCOUNT TO BIS
9.1-Table 28 (Dimensions of Nipples, Hexagon, Equal-B)	-	10	15% DISCOUNT TO BIS
11.1(a)(Internal hydraulic Pressure Test)	-	1000	15% DISCOUNT TO BIS
11.1(a)(Internal Air Pressure Test)	-	1000	15% DISCOUNT TO BIS
11.2.1( Drift Expanding Test)	-	3000	15% DISCOUNT TO BIS
11.2.2 (Taper Screw Plug Test)	-	20	15% DISCOUNT TO BIS
14(WORKMANSHIP)	-	500	15% DISCOUNT TO BIS
13 and as per IS 4736(UNIFORMITY OF ZINC COATING)	-	700	15% DISCOUNT TO BIS
13 and as per IS 4736(MASS OF ZINC COATING)	-	1000	15% DISCOUNT TO BIS
Clause 13.1.3 (Adhesion Test)	-	300	15% DISCOUNT TO BIS
Clause 10(Joints )	-	3000	15% DISCOUNT TO BIS
Clause 9.2.3 (Threads tolerance )	-	20	15% DISCOUNT TO BIS
Clause 9.2.2 (Tolerance for alignment of threads )	-	20	15% DISCOUNT TO BIS
Clause 9.1, Table- 27(Normal Size (Internal Threads) (Dimensions of Hexagon Bushes) )	-	20	15% DISCOUNT TO BIS
Clause 9.1, Table- 27(Normal Size (External Threads) (Dimensions of Hexagon Bushes) )	-	20	15% DISCOUNT TO BIS
Clause 8.3.3(Parallel threads )	-	20	15% DISCOUNT TO BIS
7.1(Chemical Composition - Sulphur - Laddle Analysis IS 228)	-	-	-
7.1(Chemical Composition - Phosphorus - Laddle Analysis IS 228)	-	-	-
8.1-Table 1( DIMENSIONS OF TUBULARS-Pieces )	-	-	-
8.2-Table-2( DIMENSIONS OF TUBULARS-Nipples )	-	-	-
8.2-Table-2( DIMENSIONS OF TUBULARS-Nipples-A )	-	-	-
8.2-Table-2( DIMENSIONS OF TUBULARS-Nipples-B )	-	-	-
8.2-Table-2( DIMENSIONS OF TUBULARS-Nipples-C )	-	-	-
8.3.1-Table 3(DIMENSIONS OF TUBULARS-Longscrews (Connectors))	-	-	-
8.3.1-Table 3(DIMENSIONS OF TUBULARS-Longscrews (Connectors)-A)	-	-	-
8.3.1-Table 3(DIMENSIONS OF TUBULARS-Longscrews (Connectors)-B)	-	-	-
8.3.1-Table 3(DIMENSIONS OF TUBULARS-Longscrews (Connectors)-C)	-	-	-
8.3.2(DIMENSIONS OF TUBULARS-Longscrews (Connectors))	-	-	-
8.3.2(DIMENSIONS OF TUBULARS-Longscrews (Connectors)-The face of the back nut angle)	-	-	-
8.4.1 -Table 4(Bends and springs)	-	-	-
8.4.1 -Table 4(Bends and springs-A)	-	-	-
8.4.1 -Table 4(Bends and springs-B)	-	-	-
8.4.1 -Table 4(Bends and springs-R)	-	-	-
8.4.1 -Table 4(Bends and springs-C)	-	-	-
8.4.1 -Table 4(Bends and springs-D)	-	-	-
8.4.1 -Table 4(Bends and springs-E)	-	-	-
8.5-Table 5( Return Bends)	-	-	-
8.5-Table 5( Return Bends-A)	-	-	-
8.5-Table 5( Return Bends-B)	-	-	-
8.6 -Table 6(Sockets)	-	-	-
8.6 -Table 6(Sockets-A)	-	-	-
8.6 -Table 6(Sockets-B)	-	-	-
8.6 -Table 6(Maximum Inside Diameter of Internal Parallel Thread)	-	-	-
9(DIMENSIONS OF STEEL FITTINGS (OTHER THAN TUBULARS))	-	-	-
9.1-Table 7(Dimensions of Screwed Ends of Fittings-D )	-	-	-
9.1-Table 7(Dimensions of Screwed Ends of Fittings-E )	-	-	-
9.1-Table 7(Dimensions of Screwed Ends of Fittings-d )	-	-	-
9.1-Table 7(Dimensions of Screwed Ends of Fittings-Taper )	-	-	-
9.1-Table 8 (Dimensions of Elbows, Tees and Crosses, Equal-A)	-	-	-
9.1-Table 9 (Dimensions of Elbows Reducing-A)	-	-	-
9.1-Table 9 (Dimensions of Elbows Reducing-B)	-	-	-
9.1-Table 10 (Dimensions of Tees, Reducing (on the Branch)-A)	-	-	-
9.1-Table 10 (Dimensions of Tees, Reducing (on the Branch)-B)	-	-	-
9.1-Table 11 (Dimensions of Tees, Reducing (on the Run and Branch, or on the Run Only)-A)	-	-	-
9.1-Table 11 (Dimensions of Tees, Reducing (on the Run and Branch, or on the Run Only)-B)	-	-	-
9.1-Table 12(Dimensions of Tees (Increasing on the Branch)-A)	-	-	-
9.1-Table 12(Dimensions of Tees (Increasing on the Branch)-B)	-	-	-
9.1-Table 13( Dimensions of Crosses, Reducing-A)	-	-	-
9.1-Table 13( Dimensions of Crosses, Reducing-B)	-	-	-
9.1-Table 14( Elbows, Tees and Crosses, Side Outlet, Equal-A)	-	-	-
9.1-Table 14( Elbows, Tees and Crosses, Side Outlet, Equal-B)	-	-	-
9.1-Table 15( Dimensions of Elbows, Round, Male and Female, Equal-A)	-	-	-
9.1-Table 15( Dimensions of Elbows, Round, Male and Female, Equal-B)	-	-	-
9.1-Table 15( Dimensions of Elbows, Round, Male and Female, Equal-Minimum Bore of Male End)	-	-	-
9.1-Table 15( Dimensions of Elbows, Round, Male and Female, Equal-Maximum Bore of Male End)	-	-	-
9.1-Table 16( Dimensions of Elbows, Equal, 135°-A)	-	-	-
9.1-Table 17 (Dimensions of Y-Pieces, Female, Equal-A)	-	-	-
9.1-Table 18 (Dimensions of Socket, Reducing-A)	-	-	-
9.1-Table 19 (Dimensions of Caps-A)	-	-	-
9.1-Table 19 (Dimensions of Caps-T)	-	-	-
9.1-Table 20(Dimensions of Plug-Minimum Length of Thread for Basic Gauge)	-	-	-
9.1-Table 20(Dimensions of Plug-Minimum Length of Thread for Basic Gauge-S)	-	-	-
9.1-Table 20(Dimensions of Plug-Minimum Length of Thread for Basic Gauge-D)	-	-	-
9.1-Table 20(Dimensions of Plug-Minimum Length of Thread for Basic Gauge-K)	-	-	-
9.1-Table 21 (Dimensions of Elbows, Tees and Crosses, Male, Equal-A)	-	-	-
9.1-Table 22(Dimensions of Y-Pieces and Angle Tees, Male, Equal-A )	-	-	-
9.1-Table 22(Dimensions of Y-Pieces and Angle Tees, Male, Equal-B )	-	-	-
9.1-Table 23( Dimensions of Twin Elbows and Sweep Tees, Male, Equal-B)	-	-	-
9.1-Table 24(Dimensions of Socket Unions-A )	-	-	-
9.1-Table 25 (Dimensions of Pipe Unions-A)	-	-	-
9.1-Table 26 (Dimensions of Union Bends-A )	-	-	-
9.1-Table 26 (Dimensions of Union Bends-B )	-	-	-
9.1-Table 27 (Dimensions of Hexagon Bushes-L)	-	-	-
9.1-Table 27 (Dimensions of Hexagon Bushes-T)	-	-	-
9.1-Table 27 (Dimensions of Hexagon Bushes-A)	-	-	-
9.1-Table 27 (Dimensions of Hexagon Bushes-B)	-	-	-
9.1-Table 28 (Dimensions of Nipples, Hexagon, Equal-L)	-	-	-
9.1-Table 28 (Dimensions of Nipples, Hexagon, Equal-T)	-	-	-
9.1-Table 28 (Dimensions of Nipples, Hexagon, Equal-A)	-	-	-
9.1-Table 28 (Dimensions of Nipples, Hexagon, Equal-C)	-	-	-
9.1-Table 28 (Dimensions of Nipples, Hexagon, Equal-B)	-	-	-
11.1(a)(Internal hydraulic Pressure Test)	-	-	-
11.1(a)(Internal Air Pressure Test)	-	-	-
11.2.1( Drift Expanding Test)	-	-	-
11.2.2 (Taper Screw Plug Test)	-	-	-
14(WORKMANSHIP)	-	-	-
Clause 13.1.3 (Adhesion Test)	-	-	-
Clause 10(Joints )	-	-	-
Clause 9.2.3 (Threads tolerance )	-	-	-
Clause 9.2.2 (Tolerance for alignment of threads )	-	-	-
Clause 9.1, Table- 27(Normal Size (Internal Threads) (Dimensions of Hexagon Bushes) )	-	-	-
Clause 9.1, Table- 27(Normal Size (External Threads) (Dimensions of Hexagon Bushes) )	-	-	-
Clause 8.3.3(Parallel threads )	-	-	-

31 Dec, 2026

-
Included w.e.f. 07.11.2023

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number