BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

14028 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

7861

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 6649 (1985)

Specification for hardened and tempered washers for high strength structural bolts and nuts (First Revision)

Type-A, Type-B, Type-C

16900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3 Table-1(Dimensions Type A- d1)	-	1000	-
3 Table-1(Dimensions Type A- d2)	-	1000	-
3 Table-1(Dimensions Type A- S)	-	1000	-
3 Table-2(Dimensions Type B&C- d)	-	1000	-
3 Table-2(Dimensions Type B&C- a)	-	1000	-
3 Table-2(Dimensions Type B&C- t)	-	1000	-
3 Table-2(Dimensions Type B&C- θ)	-	1000	-
3.1(Deviation)	-	500	-
3.2(Concentric)	-	500	-
3.3(Clearance)	-	500	-
5(Chemical Composition- Sulphur)	-	700	-
5(Chemical Composition- Phosphorus)	-	700	-
7(Hardness)	-	1000	-
8(Finish)	-	1500	-
8.1(Freedom from defect)	-	1000	-
8.1(Uniformity of zinc coating)	-	1000	-
8.1(Mass of zinc coating)	-	1500	-
8.1(Knife test (Adhesion of coating))	-	1000	-

31 Dec, 2026

-
Included w.e.f. 08.05.2024

7862

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 14394 (1996)

Industrial fasteners - Hexagon nuts of product grade C - Hot - Dip galvanized - Specification (Size Range M12 To M36)

M12 TO M36

19800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Dimensions)	-	3000	-
4(General Requirement)	-	3000	-
4(Thread)	-	1000	-
4(Mechanical properties)	-	4500	-
4(Tolerances)	-	600	-
4(Surface finish)	-	2000	-
4(Acceptability)	-	1500	-
5.1(Proof loadvalues)	-	3000	-
6(Designation)	-	1000	-
7(Marking)	-	200	-
3(Dimensions)	-	-	-
4(General Requirement)	-	-	-
4(Thread)	-	-	-
4(Mechanical properties)	-	-	-
4(Tolerances)	-	-	-
4(Surface finish)	-	-	-
4(Acceptability)	-	-	-
5.1(Proof loadvalues)	-	-	-
6(Designation)	-	-	-
7(Marking)	-	-	-

31 Dec, 2026

-
Included w.e.f. 08.05.2024

7863

AADCO TESTING & RESEACH LABORATORY PVT LTD (UNIT-2) (E37), Ghaziabad

8176906

IS 14203 (2023)

FIRE RESISTING RECORD PROTECTION CABINETS SPECIFICATION Second Revision of IS 14203

All Type/All Sizes

750000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3 and 6 (Table 1)(Nominal Sizes - Height)	-	5000	-
3 and 6 (Table 1)(Nominal Sizes - Width)	-	5000	-
3 and 6 (Table 1)(Nominal Sizes - Depth)	-	5000	-
3 and 6 (Table 1)(Height of Pedestal)	-	5000	-
7(Designation)	-	5000	-
8.1(Cabinet Construction)	-	5000	-
8.2(Locking Mechanism)	-	6500	-
8.3(Locks)	-	5000	-
8.4(Handles)	-	5000	-
9(Internal Fixtures)	-	5000	-
10.1(Minimum overall thinckness of coating)	-	5000	-
10.2(Cross Hatch Test)	-	10000	-
11, Annex-B, 3.1(Fire Endurance Test)	-	550000	-
11, Annex-B, 3.2(Fire and Impact test)	-	525000	-

19 Mar, 2027

-
Included w.e.f 06.05.2024

7864

Plastics Woven Bag Testing Lab-Technical Training & Research Centre - TTRC

9187136

IS 16208 (2015)

Textiles - High density polyethylene (HDPE)/polypropylene (PP) woven sacks for packaging 10 kg, 15 kg, 20 kg, 25 kg and 30 kg foodgrains - Specification

10 kg, 15 kg, 20 kg, 25 kg and 30 kg

16500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(TYPES)	-	0	-
4.1(Raw Material)	-	0	-
4.2(Tapes – Width IS 6192 and IS 11197)	-	0	-
4.2(Tapes – Linear Density )	-	0	-
4.2(Construction)	-	0	-
4.3(Sacks)	-	0	-
4.3.1(Bottom Seam)	-	0	-
4.3.1( The two rows of stitches shall be separated from each other)	-	0	-
4.3.1( The outer stitch)	-	0	-
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	0	-
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	0	-
4.3.1(The number of stitches/dm)	-	0	-
4.3.2(Mouth)	-	0	-
4.4 and Table 1 i(Capacity)	-	0	-
5.2 and Table 1 ii a(Dimensions Inside Length)	-	200	-
5.2 and Table 1 ii b(Dimensions Inside Width)	-	200	-
5.2 and Table 1 iii(Ends per dm )	-	200	-
5.2 and Table 1 iv(Picks per dm )	-	200	-
5.1 and Table 1 v(Mass of sack )	-	500	-
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	1000	-
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise )	-	1000	-
5.2 and Table 1 vi(Breaking strength of bottom seam )	-	750	-
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise)	-	200	-
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise )	-	200	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	8500	-
5.2 and Table 1 x(Ash content )	-	800	-
3(TYPES)	-	0	-
4.1(Raw Material)	-	0	-
4.2(Tapes – Width IS 6192 and IS 11197)	-	0	-
4.2(Tapes – Linear Density )	-	0	-
4.2(Construction)	-	0	-
4.3(Sacks)	-	0	-
4.3.1(Bottom Seam)	-	0	-
4.3.1( The two rows of stitches shall be separated from each other)	-	0	-
4.3.1( The outer stitch)	-	0	-
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	0	-
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	0	-
4.3.1(The number of stitches/dm)	-	0	-
4.3.2(Mouth)	-	0	-
4.4 and Table 1 i(Capacity)	-	0	-
5.2 and Table 1 ii a(Dimensions Inside Length)	-	200	-
5.2 and Table 1 ii b(Dimensions Inside Width)	-	200	-
5.2 and Table 1 iii(Ends per dm )	-	200	-
5.2 and Table 1 iv(Picks per dm )	-	200	-
5.1 and Table 1 v(Mass of sack )	-	500	-
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	1000	-
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise )	-	1000	-
5.2 and Table 1 vi(Breaking strength of bottom seam )	-	750	-
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise)	-	200	-
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise )	-	200	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	8500	-
5.2 and Table 1 x(Ash content )	-	800	-
4.2 (Mesh size and weight in g/cm2) (amendment 3)(Mesh size and weight in g/cm2)	-	1000	-

29 Jul, 2028

-
-

7865

Plastics Woven Bag Testing Lab-Technical Training & Research Centre - TTRC

9187136

IS 14968 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing 50 Kg/25 kg sugar – Specification (first revision)

50/25

16500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(TYPES)	-	0	-
4.1(Raw Material)	-	0	-
4.2(Tapes – Width IS 6192 and IS 11197)	-	0	-
4.2(Tapes – Linear Density )	-	0	-
4.2(Construction)	-	0	-
4.3(Sacks)	-	0	-
4.3.1(Bottom Seam)	-	0	-
4.3.1(The two rows of stitches shall be separated from each other)	-	0	-
4.3.1( The outer stitch)	-	0	-
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	0	-
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	0	-
4.3.1(stitches/dm)	-	0	-
4.3.2(Mouth)	-	0	-
4.4(Liner IS 10146 or IS 10910.)	-	0	-
4.4(Mass of the loose liner )	-	0	-
4.4(Width of the loose liner)	-	0	-
4.4(Length of the line)	-	0	-
4.4(Bottom seam of the loose liner)	-	0	-
4.4.1(Liner)	-	0	-
4.5 and Table 1 i(Capacity)	-	0	-
5.2 and Table 1 ii a(Dimensions Inside Length)	-	200	-
5.2 and Table 1 ii b(Dimensions Inside Width)	-	200	-
5.2 and Table 1 iii(Ends per dm )	-	200	-
5.2 and Table 1 iv(Picks per dm )	-	200	-
5.1 and Table 1 v a(Mass of unlaminated sack IS 1964)	-	500	-
5.1 and Table 1 v b(Mass of unlaminated sack with liner )	-	500	-
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise IS 1969 (Part 1))	-	1000	-
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise IS 1969 (Part 1))	-	1000	-
5.2 and Table 1 vi(Breaking strength of bottom seam IS 9030 )	-	750	-
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise IS 1969 (Part 1))	-	200	-
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise IS 1969 (Part 1))	-	200	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	8000	-
5.2 and Table 1 x(Ash content )	-	800	-
3(TYPES)	-	0	-
4.1(Raw Material)	-	0	-
4.2(Tapes – Width IS 6192 and IS 11197)	-	0	-
4.2(Tapes – Linear Density )	-	0	-
4.2(Construction)	-	0	-
4.3(Sacks)	-	0	-
4.3.1(Bottom Seam)	-	0	-
4.3.1(The two rows of stitches shall be separated from each other)	-	0	-
4.3.1( The outer stitch)	-	0	-
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	0	-
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	0	-
4.3.1(stitches/dm)	-	0	-
4.3.2(Mouth)	-	0	-
4.4(Liner IS 10146 or IS 10910.)	-	0	-
4.4(Mass of the loose liner )	-	200	-
4.4(Width of the loose liner)	-	0	-
4.4(Length of the line)	-	0	-
4.4(Bottom seam of the loose liner)	-	0	-
4.4.1(Liner)	-	0	-
4.5 and Table 1 i(Capacity)	-	0	-
5.2 and Table 1 ii a(Dimensions Inside Length)	-	200	-
5.2 and Table 1 ii b(Dimensions Inside Width)	-	200	-
5.2 and Table 1 iii(Ends per dm )	-	200	-
5.2 and Table 1 iv(Picks per dm )	-	200	-
5.1 and Table 1 v a(Mass of unlaminated sack IS 1964)	-	500	-
5.1 and Table 1 v b(Mass of unlaminated sack with liner )	-	500	-
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise IS 1969 (Part 1))	-	1000	-
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise IS 1969 (Part 1))	-	1000	-
5.2 and Table 1 vi(Breaking strength of bottom seam IS 9030 )	-	800	-
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise IS 1969 (Part 1))	-	200	-
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise IS 1969 (Part 1))	-	200	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	8000	-
5.2 and Table 1 x(Ash content )	-	800	-
4.2 (Mesh size and weight in g/cm2) (amendment 3)(Mesh size and weight in g/cm2)	-	1000	-
Cl-4.4 (Amendment-3)(Thickness of liner)	-	200	-
5.3(UV Resistance)	-	5500	-

29 Jul, 2028

-
-

7866

Plastics Woven Bag Testing Lab-Technical Training & Research Centre - TTRC

9187136

IS 14887 (2014)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision)

16500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Tapes – Width and Thickness ( IS 6192/IS 11197))	-	0	-
3.2(Tapes – Linear Density (IS 6192/IS 11197))	-	0	-
3.2(Tapes – Tenacity (IS 6192/IS 11197))	-	0	-
3.2(Tapes – Elongation at point of rupture (IS 6192/IS 11197))	-	0	-
3.2(Tapes – Heat Shrinkage (HDPE) (Cl. 3.2 and IS 6192))	-	500	-
3.2(Tapes – Colour Fastness for pigmented tapes (IS 6192/IS 11197))	-	0	-
3.2(Tapes – Dimensional stability (PP) (IS 11197))	-	0	-
3.2(Unlaminated Fabric Mass )	-	500	-
3.3.1(Bottom seam (IS 10789))	-	0	-
4.1 and 3.4(Mass of bale (Cl. 4.1), Capacity (Cl 3.4))	-	0	-
4.2 and Table 1 ii(Dimensions )	-	500	-
5.2 and Table 1 iii(Ends per dm )	-	200	-
5.2 and Table 1 iv(Picks per dm )	-	200	-
4.2 and Table 1 v(Mass of sack )	-	500	-
4.2 and Table 1 vi(Average breaking strength of fabric )	-	1000	-
4.2 and Table 1 vi(Breaking strength of bottom seam )	-	750	-
4.2 and Table 1 viii(Elongation at break of fabric )	-	200	-
4.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	8500	-
4.2 and Table 1 x(Ash content )	-	800	-
3.2(Tapes – Width and Thickness ( IS 6192/IS 11197))	-	0	-
3.2(Tapes – Linear Density (IS 6192/IS 11197))	-	0	-
3.2(Tapes – Tenacity (IS 6192/IS 11197))	-	0	-
3.2(Tapes – Elongation at point of rupture (IS 6192/IS 11197))	-	200	-
3.2(Tapes – Heat Shrinkage (HDPE) (Cl. 3.2 and IS 6192))	-	500	-
3.2(Tapes – Colour Fastness for pigmented tapes (IS 6192/IS 11197))	-	0	-
3.2(Tapes – Dimensional stability (PP) (IS 11197))	-	0	-
3.2(Unlaminated Fabric Mass )	-	500	-
3.3.1(Bottom seam (IS 10789))	-	800	-
4.1 and 3.4(Mass of bale (Cl. 4.1), Capacity (Cl 3.4))	-	0	-
4.2 and Table 1 ii(Dimensions )	-	500	-
5.2 and Table 1 iii(Ends per dm )	-	200	-
5.2 and Table 1 iv(Picks per dm )	-	200	-
4.2 and Table 1 v(Mass of sack )	-	500	-
4.2 and Table 1 vi(Average breaking strength of fabric )	-	1000	-
4.2 and Table 1 vi(Breaking strength of bottom seam )	-	800	-
4.2 and Table 1 viii(Elongation at break of fabric )	-	200	-
4.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	8500	-
4.2 and Table 1 x(Ash content )	-	800	-
3.1(Material Identification)	-	1000	-
3.1(Overall Migration)	-	0	-
3.2(Density)	-	0	-
3.2(MFI)	-	1000	-
Cl 3.2 (Weight in g/m2) (Amendment 3)(Weight in g/m2)	-	200	-
Cl 3.2 (Mesh size)(Mesh size)	-	200	-
3.3.2(Mouth)	-	200	-

29 Jul, 2028

-
-

7867

Bharat Test House Pvt Ltd 1474 Sonipat Haryana

9135626

IS 1258 (2005)

Bayonet lamp holders (Fourth Revision)

Bayonet Lamp Holders

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1(Marking )	-	100	-
8.2(Marking )	-	100	-
8.3(Marking )	-	100	-
8.4(Marking )	-	100	-
8.5(Marking )	-	100	-
8.6(Marking )	-	100	-
8.7(Marking )	-	100	-
8.8(Marking )	-	100	-
6(Rating )	-	50	-
6(Rating )	-	50	-
7(Classification)	-	50	-
7.2(Classification)	-	50	-
7.3(Classification)	-	50	-
7.4(Classification)	-	50	-
7.5(Classification)	-	50	-
7.6(Classification)	-	50	-
9.1(Dimensions)	-	200	-
9.1(Dimensions)	-	200	-
9.1(Dimensions)	-	200	-
9.1(Dimensions)	-	200	-
9.1(Dimensions)	-	200	-
9.1(Dimensions)	-	200	-
9.1(Dimensions)	-	200	-
9.1(Dimensions)	-	200	-
9.1(Dimensions)	-	200	-
9.1(Dimensions)	-	200	-
9.1(Dimensions)	-	200	-
9.1(Dimensions)	-	200	-
9.1(Dimensions)	-	200	-
9.1(Dimensions)	-	200	-
9.1(Dimensions)	-	200	-
9.1(Dimensions)	-	200	-
9.1(Dimensions)	-	200	-
9.1(Dimensions)	-	200	-
9.1(Dimensions)	-	200	-
9.1(Dimensions)	-	200	-
9.1(Dimensions)	-	200	-
9.1(Dimensions)	-	200	-
9.1(Dimensions)	-	200	-
9.1(Dimensions)	-	200	-
9.1(Dimensions)	-	200	-
9.2(Dimensions)	-	200	-
9.3(Dimensions)	-	200	-
9.3(Dimensions)	-	200	-
9.3(Dimensions)	-	200	-
9.3(Dimensions)	-	200	-
9.3(Dimensions)	-	200	-
9.3(Dimensions)	-	200	-
9.3(Dimensions)	-	200	-
10(Protection against electric shock )	-	750	-
11.1(Terminals)	-	500	-
11.2(Terminals)	-	500	-
11.3(Terminals)	-	500	-
11.3(Terminals)	-	500	-
11.3(Terminals)	-	500	-
11.3(Terminals)	-	500	-
11.3(Terminals)	-	500	-
11.3(Terminals)	-	500	-
11.4(Terminals)	-	500	-
12(Provision for Earthing)	-	750	-
13.1(Construction)	-	500	-
13.1(Construction (Data Sheet No 7005-10))	-	500	-
13.1(Construction (Data Sheet No 7005-10& 7006-15A))	-	500	-
13.2(Construction (Data Sheet No 7005-10& 7006-15A))	-	500	-
13.3(Construction )	-	500	-
13.4(Construction )	-	500	-
13.5(Construction)	-	500	-
13.2 ,13.6 & 13.7 (Construction)	-	500	-
13.2 ,13.6 & 13.8(Construction)	-	500	-
13.11(Construction)	-	500	-
14(Construction)	-	1000	-
15.1(Moisture Resistance, Insulation Resistance and Electric Strength)	-	1500	-
15.2(Moisture Resistance, Insulation Resistance and Electric Strength)	-	1500	-
15.3(Moisture Resistance, Insulation Resistance and Electric Strength)	-	1500	-
16.1(Mechanical Strength)	-	1250	-
16.1(Mechanical Strength)	-	1250	-
16.2(Mechanical Strength)	-	1250	-
16.3(Mechanical Strength)	-	1250	-
16.4(Mechanical Strength)	-	1250	-
16.5(Mechanical Strength)	-	1250	-
16.6 & Table - 6(Mechanical Strength)	-	1250	-
16.7(Mechanical Strength)	-	1250	-
16.8(Mechanical Strength)	-	1250	-
17(Screws,current-carrying parts and connections)	-	750	-
18(Creepage distances and Clearances)	-	600	-
18.1, Table 8(Creepage distances and Clearances)	-	600	-
18.1, Table 8(Creepage distances and Clearances)	-	600	-
18.1, Table 8(Creepage distances and Clearances)	-	600	-
18.1, Table 8(Creepage distances and Clearances)	-	600	-
18.1, Table 8(Creepage distances and Clearances)	-	600	-
18.1, Table 8(Creepage distances and Clearances)	-	600	-
18.1, Table 8(Creepage distances and Clearances)	-	600	-
19.1(General resistance to heat)	-	1250	-
19.2(General resistance to heat)	-	1250	-
19.3(General resistance to heat)	-	1250	-
19.4(Resistance to heat test)	-	1250	-
20.1(Resistance to heat, fire and tracking)	-	2250	-
20.3(Resistance to heat, fire and tracking)	-	2250	-
20.4(Resistance to heat, fire and tracking)	-	2250	-
20.5(Resistance to tracking)	-	2250	-
21.1(Resistance to excessive residual stresses and to rusting)	-	3000	-
21.1(Resistance to excessive residual stresses and to rusting)	-	3000	-
8.1(Marking )	-	100	-
8.1(Marking )	-	100	-
8.1(Marking )	-	100	-
8.1(Marking )	-	100	-
8.1(Marking )	-	100	-
8.1(Marking )	-	100	-
8.1(Marking )	-	100	-
8.1(Marking )	-	100	-
8.1(Marking )	-	100	-
8.1(Marking )	-	100	-
8.1(Marking )	-	100	-
8.1(Marking )	-	100	-
8.1(Marking )	-	100	-
8.2(Marking )	-	100	-
8.2(Marking )	-	100	-
8.2(Marking )	-	100	-
8.3(Marking )	-	100	-
8.4(Marking )	-	100	-
8.5(Marking )	-	100	-
8.6(Marking )	-	100	-
8.7(Marking )	-	100	-
8.8(Marking )	-	100	-
6(Rating )	-	50	-
6(Rating )	-	50	-
7(Classification)	-	50	-
7.2(Classification)	-	50	-
7.3(Classification)	-	50	-
7.4(Classification)	-	50	-
7.5(Classification)	-	50	-
7.6(Classification)	-	50	-
9.1(Dimensions)	-	200	-
9.1(Dimensions)	-	200	-
9.1(Dimensions)	-	200	-
9.1(Dimensions)	-	200	-
9.1(Dimensions)	-	200	-
9.1(Dimensions)	-	200	-
9.1(Dimensions)	-	200	-
9.1(Dimensions)	-	200	-
9.1(Dimensions)	-	200	-
9.1(Dimensions)	-	200	-
9.1(Dimensions)	-	200	-
9.1(Dimensions)	-	200	-
9.1(Dimensions)	-	200	-
9.1(Dimensions)	-	200	-
9.1(Dimensions)	-	200	-
9.1(Dimensions)	-	200	-
9.1(Dimensions)	-	200	-
9.1(Dimensions)	-	200	-
9.1(Dimensions)	-	200	-
9.1(Dimensions)	-	200	-
9.1(Dimensions)	-	200	-
9.1(Dimensions)	-	200	-
9.1(Dimensions)	-	200	-
9.1(Dimensions)	-	200	-
9.2(Dimensions)	-	200	-
9.3(Dimensions)	-	200	-
9.3(Dimensions)	-	200	-
9.3(Dimensions)	-	200	-
9.3(Dimensions)	-	200	-
9.3(Dimensions)	-	200	-
9.3(Dimensions)	-	200	-
10(Protection against electric shock )	-	750	-
11.1(Terminals)	-	500	-
11.2(Terminals)	-	500	-
11.3(Terminals)	-	500	-
12.3(Terminals)	-	750	-
11.3(Terminals)	-	500	-
11.3(Terminals)	-	500	-
11.3(Terminals)	-	500	-
11.3(Terminals)	-	500	-
11.4(Terminals)	-	500	-
12(Provision for Earthing)	-	750	-
13.1(Construction)	-	500	-
13.1(Construction (Data Sheet No 7005-10))	-	500	-
13.1(Construction (Data Sheet No 7005-10& 7006-15A))	-	500	-
13.2(Construction (Data Sheet No 7005-10& 7006-15A))	-	500	-
13.3(Construction )	-	500	-
13.4(Construction )	-	500	-
13.5(Construction)	-	500	-
13.2 ,13.6 & 13.7 (Construction)	-	500	-
13.2 ,13.6 & 13.8(Construction)	-	500	-
13.11(Construction)	-	500	-
14(Construction)	-	1000	-
15.1(Moisture Resistance, Insulation Resistance and Electric Strength)	-	1500	-
15.2(Moisture Resistance, Insulation Resistance and Electric Strength)	-	1500	-
15.3(Moisture Resistance, Insulation Resistance and Electric Strength)	-	1500	-
16.1(Mechanical Strength)	-	1250	-
16.1(Mechanical Strength)	-	1250	-
16.2(Mechanical Strength)	-	1250	-
16.3(Mechanical Strength)	-	1250	-
16.4(Mechanical Strength)	-	1250	-
16.5(Mechanical Strength)	-	1250	-
16.6 & Table - 6(Mechanical Strength)	-	1250	-
16.7(Mechanical Strength)	-	1250	-
16.8(Mechanical Strength)	-	1250	-
17(Screws,current-carrying parts and connections)	-	750	-
18(Creepage distances and Clearances)	-	600	-
18(Creepage distances and Clearances)	-	600	-
18(Creepage distances and Clearances)	-	600	-
18(Creepage distances and Clearances)	-	600	-
18(Creepage distances and Clearances)	-	600	-
18(Creepage distances and Clearances)	-	600	-
18(Creepage distances and Clearances)	-	600	-
18(Creepage distances and Clearances)	-	600	-
19.1(General resistance to heat)	-	1250	-
19.2(General resistance to heat)	-	1250	-
19.3(General resistance to heat)	-	1250	-
19.4(Resistance to heat test)	-	1250	-
20.1(Resistance to heat, fire and tracking)	-	2250	-
20.3(Resistance to heat, fire and tracking)	-	2250	-
20.4(Resistance to heat, fire and tracking)	-	2250	-
20.5(Resistance to tracking)	-	2250	-
21.1(Resistance to excessive residual stresses and to rusting)	-	3000	-
21.1(Resistance to excessive residual stresses and to rusting)	-	3000	-
8.1(Marking )	-	0	-
8.2(Marking )	-	0	-
8.3(Marking )	-	0	-
8.4(Marking )	-	0	-
8.5(Marking )	-	0	-
8.6(Marking )	-	0	-
8.7(Marking )	-	0	-
8.8(Marking )	-	0	-
6(Rating )	-	0	-
6(Rating )	-	0	-
7(Classification)	-	0	-
7.2(Classification)	-	0	-
7.3(Classification)	-	0	-
7.4(Classification)	-	0	-
7.5(Classification)	-	0	-
7.6(Classification)	-	0	-
9.1(Dimensions)	-	0	-
9.1(Dimensions)	-	0	-
9.1(Dimensions)	-	0	-
9.1(Dimensions)	-	0	-
9.1(Dimensions)	-	0	-
9.1(Dimensions)	-	0	-
9.1(Dimensions)	-	0	-
9.1(Dimensions)	-	0	-
9.1(Dimensions)	-	0	-
9.1(Dimensions)	-	0	-
9.1(Dimensions)	-	0	-
9.1(Dimensions)	-	0	-
9.1(Dimensions)	-	0	-
9.1(Dimensions)	-	0	-
9.1(Dimensions)	-	0	-
9.1(Dimensions)	-	0	-
9.1(Dimensions)	-	0	-
9.1(Dimensions)	-	0	-
9.1(Dimensions)	-	0	-
9.1(Dimensions)	-	0	-
9.1(Dimensions)	-	0	-
9.1(Dimensions)	-	0	-
9.1(Dimensions)	-	0	-
9.1(Dimensions)	-	0	-
9.1(Dimensions)	-	0	-
9.2(Dimensions)	-	0	-
9.3(Dimensions)	-	0	-
9.3(Dimensions)	-	0	-
9.3(Dimensions)	-	0	-
9.3(Dimensions)	-	0	-
9.3(Dimensions)	-	0	-
9.3(Dimensions)	-	0	-
9.3(Dimensions)	-	0	-
10(Protection against electric shock )	-	0	-
11.1(Terminals)	-	0	-
11.2(Terminals)	-	0	-
11.3(Terminals)	-	0	-
11.3(Terminals)	-	0	-
11.3(Terminals)	-	0	-
11.3(Terminals)	-	0	-
11.3(Terminals)	-	0	-
11.3(Terminals)	-	0	-
11.4(Terminals)	-	0	-
12(Provision for Earthing)	-	0	-
13.1(Construction)	-	0	-
13.1(Construction (Data Sheet No 7005-10))	-	0	-
13.1(Construction (Data Sheet No 7005-10& 7006-15A))	-	0	-
13.2(Construction (Data Sheet No 7005-10& 7006-15A))	-	0	-
13.3(Construction )	-	0	-
13.4(Construction )	-	0	-
13.5(Construction)	-	0	-
13.2 ,13.6 & 13.7 (Construction)	-	0	-
13.2 ,13.6 & 13.8(Construction)	-	0	-
13.11(Construction)	-	0	-
14(Construction)	-	0	-
15.1(Moisture Resistance, Insulation Resistance and Electric Strength)	-	0	-
15.2(Moisture Resistance, Insulation Resistance and Electric Strength)	-	0	-
15.3(Moisture Resistance, Insulation Resistance and Electric Strength)	-	0	-
16.1(Mechanical Strength)	-	0	-
16.1(Mechanical Strength)	-	0	-
16.2(Mechanical Strength)	-	0	-
16.3(Mechanical Strength)	-	0	-
16.4(Mechanical Strength)	-	0	-
16.5(Mechanical Strength)	-	0	-
16.6 & Table - 6(Mechanical Strength)	-	0	-
16.7(Mechanical Strength)	-	0	-
16.8(Mechanical Strength)	-	0	-
17(Screws,current-carrying parts and connections)	-	0	-
18(Creepage distances and Clearances)	-	0	-
18.1, Table 8(Creepage distances and Clearances)	-	0	-
18.1, Table 8(Creepage distances and Clearances)	-	0	-
18.1, Table 8(Creepage distances and Clearances)	-	0	-
18.1, Table 8(Creepage distances and Clearances)	-	0	-
18.1, Table 8(Creepage distances and Clearances)	-	0	-
18.1, Table 8(Creepage distances and Clearances)	-	0	-
18.1, Table 8(Creepage distances and Clearances)	-	0	-
19.1(General resistance to heat)	-	0	-
19.2(General resistance to heat)	-	0	-
19.3(General resistance to heat)	-	0	-
19.4(Resistance to heat test)	-	0	-
20.1(Resistance to heat, fire and tracking)	-	0	-
20.3(Resistance to heat, fire and tracking)	-	0	-
20.4(Resistance to heat, fire and tracking)	-	0	-
20.5(Resistance to tracking)	-	0	-
21.1(Resistance to excessive residual stresses and to rusting)	-	0	-
21.1(Resistance to excessive residual stresses and to rusting)	-	0	-
8.1(Marking )	-	0	-
8.1(Marking )	-	0	-
8.1(Marking )	-	0	-
8.1(Marking )	-	0	-
8.1(Marking )	-	0	-
8.1(Marking )	-	0	-
8.1(Marking )	-	0	-
8.1(Marking )	-	0	-
8.1(Marking )	-	0	-
8.1(Marking )	-	0	-
8.1(Marking )	-	0	-
8.1(Marking )	-	0	-
8.1(Marking )	-	0	-
8.2(Marking )	-	0	-
8.2(Marking )	-	0	-
8.2(Marking )	-	0	-
8.3(Marking )	-	0	-
8.4(Marking )	-	0	-
8.5(Marking )	-	0	-
8.6(Marking )	-	0	-
8.7(Marking )	-	0	-
8.8(Marking )	-	0	-
6(Rating )	-	0	-
6(Rating )	-	0	-
7(Classification)	-	0	-
7.2(Classification)	-	0	-
7.3(Classification)	-	0	-
7.4(Classification)	-	0	-
7.5(Classification)	-	0	-
7.6(Classification)	-	0	-
9.1(Dimensions)	-	0	-
9.1(Dimensions)	-	0	-
9.1(Dimensions)	-	0	-
9.1(Dimensions)	-	0	-
9.1(Dimensions)	-	0	-
9.1(Dimensions)	-	0	-
9.1(Dimensions)	-	0	-
9.1(Dimensions)	-	0	-
9.1(Dimensions)	-	0	-
9.1(Dimensions)	-	0	-
9.1(Dimensions)	-	0	-
9.1(Dimensions)	-	0	-
9.1(Dimensions)	-	0	-
9.1(Dimensions)	-	0	-
9.1(Dimensions)	-	0	-
9.1(Dimensions)	-	0	-
9.1(Dimensions)	-	0	-
9.1(Dimensions)	-	0	-
9.1(Dimensions)	-	0	-
9.1(Dimensions)	-	0	-
9.1(Dimensions)	-	0	-
9.1(Dimensions)	-	0	-
9.1(Dimensions)	-	0	-
9.1(Dimensions)	-	0	-
9.2(Dimensions)	-	0	-
9.3(Dimensions)	-	0	-
9.3(Dimensions)	-	0	-
9.3(Dimensions)	-	0	-
9.3(Dimensions)	-	0	-
9.3(Dimensions)	-	0	-
9.3(Dimensions)	-	0	-
10(Protection against electric shock )	-	0	-
11.1(Terminals)	-	0	-
11.2(Terminals)	-	0	-
11.3(Terminals)	-	0	-
12.3(Terminals)	-	0	-
11.3(Terminals)	-	0	-
11.3(Terminals)	-	0	-
11.3(Terminals)	-	0	-
11.3(Terminals)	-	0	-
11.4(Terminals)	-	0	-
12(Provision for Earthing)	-	0	-
13.1(Construction)	-	0	-
13.1(Construction (Data Sheet No 7005-10))	-	0	-
13.1(Construction (Data Sheet No 7005-10& 7006-15A))	-	0	-
13.2(Construction (Data Sheet No 7005-10& 7006-15A))	-	0	-
13.3(Construction )	-	0	-
13.4(Construction )	-	0	-
13.5(Construction)	-	0	-
13.2 ,13.6 & 13.7 (Construction)	-	0	-
13.2 ,13.6 & 13.8(Construction)	-	0	-
13.11(Construction)	-	0	-
14(Construction)	-	0	-
15.1(Moisture Resistance, Insulation Resistance and Electric Strength)	-	0	-
15.2(Moisture Resistance, Insulation Resistance and Electric Strength)	-	0	-
15.3(Moisture Resistance, Insulation Resistance and Electric Strength)	-	0	-
16.1(Mechanical Strength)	-	0	-
16.1(Mechanical Strength)	-	0	-
16.2(Mechanical Strength)	-	0	-
16.3(Mechanical Strength)	-	0	-
16.4(Mechanical Strength)	-	0	-
16.5(Mechanical Strength)	-	0	-
16.6 & Table - 6(Mechanical Strength)	-	0	-
16.7(Mechanical Strength)	-	0	-
16.8(Mechanical Strength)	-	0	-
17(Screws,current-carrying parts and connections)	-	0	-
18(Creepage distances and Clearances)	-	0	-
18(Creepage distances and Clearances)	-	0	-
18(Creepage distances and Clearances)	-	0	-
18(Creepage distances and Clearances)	-	0	-
18(Creepage distances and Clearances)	-	0	-
18(Creepage distances and Clearances)	-	0	-
18(Creepage distances and Clearances)	-	0	-
18(Creepage distances and Clearances)	-	0	-
19.1(General resistance to heat)	-	0	-
19.2(General resistance to heat)	-	0	-
19.3(General resistance to heat)	-	0	-
19.4(Resistance to heat test)	-	0	-
20.1(Resistance to heat, fire and tracking)	-	0	-
20.3(Resistance to heat, fire and tracking)	-	0	-
20.4(Resistance to heat, fire and tracking)	-	0	-
20.5(Resistance to tracking)	-	0	-
21.1(Resistance to excessive residual stresses and to rusting)	-	0	-
21.1(Resistance to excessive residual stresses and to rusting)	-	0	-

19 Mar, 2026

-
including w.e.f 09.10.2024

7868

MSME TESTING CENTRE, CHENNAI

6106704

IS 6721 (2023)

SANDAL AND SLIPPERS SPECIFICATION First revision

8800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No.4(SHAPE AND DESIGN)	-	0	-
Cl. No.5("SIZE AND FITTINGS ")	-	0	-
Cl. No.6("CONSTRUCTION ")	-	0	-
Cl. No.7(MATERIAL)	-	0	-
Cl. No.8.1, Table no. 1(i),a("Tear strength, (other than moulded upper material) ")	-	300	-
Cl. No.8.1, Table no. 1(i),b("For all moulded upper material ")	-	0	-
Cl. No.8.1, Table no. 1(ii)(Flexing endurance)	-	400	-
Cl. No.8.2,Table no. 2(i)(Tear strength)	-	300	-
Cl. No.8.2,Table no. 2(ii),a("Abrasion resistance- At dry condition")	-	500	-
Cl. No.8.2,Table no. 2(ii),b("Abrasion resistance- At wet condition")	-	0	-
Cl. No.8.3,Table no. 3(i)(Tear strength)	-	300	-
Cl. No.8.3,Table no. 3(ii),a("Abrasion resistance- At dry condition")	-	500	-
Cl. No.8.3,Table no. 3(ii),b("Abrasion resistance- At wet condition")	-	0	-
Cl. No.8.4,Table no. 4(i)(Grain crack index)	-	300	-
Cl. No.8.4,Table no. 4(ii)(Density)	-	200	-
Cl. No.8.4,Table no. 4(iii)(Abrasion resistance)	-	300	-
Cl. No.8.4,Table no. 5(i)(Density)	-	200	-
Cl. No.8.4,Table no. 5(ii)("Abrasion resistance, Volume loss ")	-	300	-
Cl. No.8.4, Table no. 5(iii)("Flexing resistance, At 30 000 flexes")	-	400	-
Cl. No.8.5, Table no. 6(i)("Bond strength, N/mm, Min (Applicable when fore part is fully covered or strap width is more than 25 mm)")	-	300	-
Cl. No.8.5, Table no. 6(ii)("Toe post attachment strength, N, Min (Applicable if toe post is present)")	-	300	-
Cl. No.8.5, Table no. 6(iii)("Toe ring attachment strength, Min (Applicable if toe ring is not integral part of upper")	-	300	-
Cl. No.8.5, Table no. 6(iv)(Strap to outsole strength)	-	300	-
Cl. No.8.5, Table no. 6(v)("Attachment strength of back strap and Buckle/D-ring ")	-	300	-
Cl. No.8.5, Table no. 6(vi)("Attachment strength of elastic, limit of useful extension, percent")	-	300	-
Cl. No.8.5, Table no. 6(vii)("Attachment strength of back strap and velcro, N, Min (If, present)")	-	300	-
Cl. No.8.5, Table no. 6(viii)("Hydrolysis resistance, Cut growth after 150 000 flexes, mm, Max (Applicable for PU sole only)")	-	600	-
Cl. No.8.5, Table no. 6(ix)("Heel pull off strength, N, Min (Applicable for heel height 40 mm and above attached separately to the sandal/slipper)")	-	300	-
Cl. No.8.5, Table no. 6(x)("Inter layer bond strength, N/mm, (Applicable for multi-layer sole)")	-	300	-
Cl. No.8.5, Table no. 6(xi)("Slip Resistance, Coefficient of Friction (COF) (Not applicable for leather sole) (To be carried out on quarry tiles)")	-	900	-
Cl. No.8.6.2(Lead content)	-	200	-
Cl. No.9.(MARKING AND PACKING)	-	0	-
Cl. No.8.6.1,Table 1 of IS 17011(iv)(Chromium (VI))	-	300	-
Cl. No.8.6.1,Table 1 of IS 17011(x)(pH)	-	100	-
Cl-5 ((Amendment No-1)(Category And Type)	-	0	-
Cl.8 Table-1 S.No 1, (i) (Amendment No-1)(Bond strength , N/mm, Min)	-	0	-
Cl.8 Table-1 S.No 1, (ii) (Amendment No-1)(Toe post attachment strength)	-	0	-
Cl.8 Table-1 S.No 1, (iii) (Amendment No-1)(Toe ring attachment strength)	-	0	-
Cl.8 Table-1 S.No 1, (iv) (Amendment No-1)(Strap to outsole strength N, Min)	-	0	-
Cl.8 Table-1 S.No 1, (v) (Amendment No-1)(Attachment strength of back strap and buckle/D-ring N, Min)	-	0	-
Cl.8 Table-1 S.No 1, (vi) (Amendment No-1)(Limit of useful extension, percent, Min)	-	0	-
Cl.8 Table-1 S.No 1, (vii) (Amendment No-1)(Attachment strength of back strap and velcro, N, Mi)	-	0	-
Cl.8 Table-1 S.No 1, (viii) (Amendment No-1)(Hydrolysis resistance)	-	0	-
Cl.8 Table-1 S.No 1, (ix) (Amendment No-1)(Heel pull off strength)	-	0	-
Cl.8 Table-1 S.No 1, (x) (Amendment No-1)(Inter layer bond strength)	-	0	-
Cl.8 Table-1 S.No 1, (xi) (Amendment No-1)(Slip resistance, coefficient of friction (COF)3)	-	0	-
Cl.8 Table-1 S.No 1, (xii) (Amendment No-1)(Abrasion resistance, (volume loss) mm3 , Max)	-	0	-
Cl.8 Table-1 S.No 1, (xiii) (Amendment No-1)("Flexing resistance (Belt method or Bennewart flex method)")	-	0	-
Cl.8 Table-1 S.No 1, (xv) (Amendment No-1)(Lead content (as Pb)7 ppm)	-	0	-
Cl.9 Table-2 S.No 1, (i) a (Amendment No-1)(Tear strength for other than moulded upper material)	-	0	-
Cl.9 Table-2 S.No 1, (i) b (Amendment No-1)(Tear strength For all moulded upper material)	-	0	-
Cl.9 Table-2 S.No 1, (ii) (Amendment No-1)(Flexing endurance)	-	0	-
Cl.9 Table-3 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	0	-
Cl.9 Table-3 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	0	-
Cl.9 Table-4 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	0	-
Cl.9 Table-4 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	0	-
Cl.9 Table-5 S.No 1, (ii) (Amendment No-1)(Density, g/cm3 , Min)	-	0	-
Cl.9 Table-6 S.No 1, (i) (Amendment No-1)("Density, g/cm3 , Min (a)-Cellular, (b) Solid ")	-	0	-
Cl-10 (Amendment No-1)(Marking)	-	0	-
Cl.9 Table-5 S.No 1, (i) (Amendment No-1)(Grain crack index)	-	0	-
Cl.9 Table-5 S.No 1, (iii) (Amendment No-1)(Abrasion resistance, mm/kcs)	-	0	-

31 Dec, 2026

-
Included w.e.f. 02.04.2024 Exclusion: Cl. No.8.6.1,Table 1 of IS 17011(i) (Allergenic and carcinogenic disperse dyes), Cl. No.8.6.1,Table 1 of IS 17011(ii) (Aromatic amines released from Azo dyes (each individual amine)), Cl. No.8.6.1,Table 1 of IS 17011(iii) (Aromatic amines released from Azo dyes (each individual amine)), Cl. No.8.6.1,Table 1 of IS 17011(v) (Dimethyl fumarate (DMFU)), Cl. No.8.6.1,Table 1 of IS 17011(vi) (Formaldehyde (free or released by partial hydrolysis)), Cl. No.8.6.1,Table 1 of IS 17011(vii) (Formaldehyde), Cl. No.8.6.1,Table 1 of IS 17011(viii) (Organotin compounds), Cl. No.8.6.1,Table 1 of IS 17011(ix) (PCP-TeCP-TriCP polychlorophenols), Cl. No.8.6.1,Table 1 of IS 17011(xi) (Phthalates (each individual phthalate)), Cl. No.8.6.1,Table 1 of IS 17011(xii) (Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB)) Amendment No.1 Included w.e.f 03.05.2024

7869

National Test House (WR) - NTH, Mumbai

7107604

IS 302 : Part 2 : Sec 6 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 6 cooking ranges, hobs, ovens and similar appliances (First Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	500	-
7.0(Marking and instructions)	-	500	-
8.0(Protection against access to live part test)	-	500	-
9.0(Starting of motor-operated appliances test)	-	500	-
10.0(Power Input and current test)	-	500	-
11.0(Heating test)	-	1000	-
13.0(Leakage current and electric strength test)	-	500	-
14.0(Transient voltages)	-	500	-
15.0(Moisture Resistance)	-	1000	-
16.0(Leakage current and electric strength test)	-	500	-
17.0(Overload protection of transformers test)	-	500	-
18.0(Endurance test)	-	1000	-
19.0(Abnormal Operations)	-	1000	-
20.0(Stability and Mechanical Hazards)	-	500	-
21.0(Mechanical Strength)	-	500	-
22.0(Construction verification related tests)	-	500	-
23.0(Internal wiring)	-	500	-
24.0(Components)	-	500	-
25.0(Supply connections and External Flexible Cords)	-	500	-
26.0(Terminal for External Conductors)	-	500	-
27.0(Provision for Earthing)	-	500	-
28.0(Screws and connections)	-	500	-
29.0(Clearances and Creepage distances and solid insulation)	-	500	-
30.0(Resistance to heat and fire)	-	500	-
31.0(Resistance to rusting)	-	500	-
19.11.4.1(Electrostatic discharges)	-	500	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	500	-
19.11.4.7(Harmonics)	-	500	-
4(General Requirements)	-	500	-
5(General condition for the tests)	-	500	-
6.0(Classification)	-	500	-
7.0(Marking and instructions)	-	500	-
8.0(Protection against access to live part test)	-	500	-
9.0(Starting of motor-operated appliances test)	-	500	-
10.0(Power Input and current test)	-	500	-
11.0(Heating test)	-	1000	-
13.0(Leakage current and electric strength test)	-	500	-
14.0(Transient voltages)	-	500	-
15.0(Moisture Resistance)	-	1000	-
16.0(Leakage current and electric strength test)	-	500	-
17.0(Overload protection of transformers test)	-	500	-
18.0(Endurance test)	-	1000	-
19.0(Abnormal Operations)	-	1000	-
20.0(Stability and Mechanical Hazards)	-	500	-
21.0(Mechanical Strength)	-	500	-
22.0(Construction verification related tests)	-	500	-
23.0(Internal wiring)	-	500	-
24.0(Components)	-	500	-
25.0(Supply connections and External Flexible Cords)	-	500	-
26.0(Terminal for External Conductors)	-	500	-
27.0(Provision for Earthing)	-	500	-
28.0(Screws and connections)	-	500	-
29.0(Clearances and Creepage distances and solid insulation)	-	500	-
30.0(Resistance to heat and fire)	-	500	-
31.0(Resistance to rusting)	-	500	-
19.11.4.1(Electrostatic discharges)	-	500	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	500	-
19.11.4.7(Harmonics)	-	500	-
4(General Requirements)	-	500	-
5(General condition for the tests)	-	500	-

24 Jul, 2025

-
Included w.e.f. 31.07.2024 Exclusion: Cl.32.0 (Radiation, Toxicity and Similar hazards), Cl. 19.11.4.2 (Radiated fields), Cl. 19.11.4.3 (Fast transient bursts), Cl. 19.11.4.4 (Surge immunity test), Cl. 19.11.4.5 (Immunity to conducted discharges)

7870

National Test House (WR) - NTH, Mumbai

7107604

IS 302 : Part 2 : Sec 2 (1997)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 2 vacuum cleaners and water suction cleaning appliances

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Rating)	-	500	-
6(Classification)	-	500	-
7(Marking)	-	500	-
8(Protection against Access to Live Parts)	-	500	-
9(Starting Of Motor Operated Appliances)	-	500	-
10("Power Input & Current")	-	500	-
11(Temperature Rise/ Heating)	-	1000	-
12(OPERATION UNDER OVERLOAD CONDITIONS OF APPLIANCES WITH HEATING ELEMENTS)	-	1000	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	500	-
15(MOISTURE RESISTANCE)	-	1000	-
16(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( AFTER HUMIDITY TREATMENT ))	-	500	-
17(OVERLOAD PROTECTION)	-	500	-
19(ABNORMAL OPERATION)	-	500	-
20(STABILITY AND MECHANICAL HAZARDS)	-	500	-
21(MECHANICAL STRENGTH)	-	500	-
22(Construction)	-	500	-
23(INTERNAL WIRING)	-	500	-
24(COMPONENTS)	-	500	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	500	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	500	-
27(PROVISION FOR EARTHING)	-	500	-
28(SCREWS AND CONNECTIONS)	-	500	-
29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION)	-	500	-
30(RESISTANCE TO HEAT, FIRE AND TRACKING)	-	1000	-
31(RESISTANCE TO RUSTING)	-	500	-
5(Rating)	-	500	-
6(Classification)	-	500	-
7(Marking)	-	500	-
8(Protection against Access to Live Parts)	-	500	-
9(Starting Of Motor Operated Appliances)	-	500	-
10("Power Input & Current")	-	500	-
11(Temperature Rise/ Heating)	-	1000	-
12(OPERATION UNDER OVERLOAD CONDITIONS OF APPLIANCES WITH HEATING ELEMENTS)	-	500	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	500	-
15(MOISTURE RESISTANCE)	-	1000	-
16(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( AFTER HUMIDITY TREATMENT ))	-	500	-
17(OVERLOAD PROTECTION)	-	500	-
19(ABNORMAL OPERATION)	-	500	-
20(STABILITY AND MECHANICAL HAZARDS)	-	500	-
21(MECHANICAL STRENGTH)	-	500	-
22(Construction)	-	500	-
23(INTERNAL WIRING)	-	500	-
24(COMPONENTS)	-	500	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	500	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	500	-
27(PROVISION FOR EARTHING)	-	500	-
28(SCREWS AND CONNECTIONS)	-	500	-
29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION)	-	500	-
30(RESISTANCE TO HEAT, FIRE AND TRACKING)	-	1000	-
31(RESISTANCE TO RUSTING)	-	500	-
5(Rating)	-	500	-
6(Classification)	-	500	-
7(Marking)	-	500	-
8(Protection against Access to Live Parts)	-	500	-
9(Starting Of Motor Operated Appliances)	-	500	-
10("Power Input & Current")	-	500	-
11(Temperature Rise/ Heating)	-	1000	-
12(OPERATION UNDER OVERLOAD CONDITIONS OF APPLIANCES WITH HEATING ELEMENTS)	-	500	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	500	-
15(MOISTURE RESISTANCE)	-	500	-
16(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( AFTER HUMIDITY TREATMENT ))	-	500	-
17(OVERLOAD PROTECTION)	-	500	-
19(ABNORMAL OPERATION)	-	1000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	500	-
21(MECHANICAL STRENGTH)	-	500	-
22(Construction)	-	500	-
23(INTERNAL WIRING)	-	500	-
24(COMPONENTS)	-	500	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	500	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	500	-
27(PROVISION FOR EARTHING)	-	500	-
28(SCREWS AND CONNECTIONS)	-	500	-
29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION)	-	500	-
30(RESISTANCE TO HEAT, FIRE AND TRACKING)	-	500	-
31(RESISTANCE TO RUSTING)	-	500	-

24 Jul, 2025

-
Included w.e.f. 31.07.2024 Exclusion: Cl.14 (RADIO AND TELEVISION INTERFERENCE SUPPRESSION), Cl. 32 (RADIATION HAZARDS), 19.11.4.2 (Radiated fields), Cl. 19.11.4.3 (Fast transient bursts), Cl. 19.11.4.4 (Surge immunity test), Cl. 19.11.4.5 (Immunity to conducted discharges), Cl. 19.11.4.1 (Electrostatic discharges)

7871

DELHI TEST HOUSE (50) KUNDLI SONIPAT

9127026

IS 4159 (2021)

Mineral Filled Sheathed Heating Elements

11600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
"Cl. 6 IS 4159:2021"(Classification)	-	600	-
"Cl. 8 IS 4159:2021"(Protection against access to live parts)	-	600	-
"Cl. 9 IS 4159:2021"(Starting of motor operated appliances)	-	1000	-
"Cl. 10 IS 4159:2021"(Power Input and Current)	-	500	-
"Cl. 11 IS 4159:2021"(Heating)	-	600	-
"Cl. 13 IS 4159:2021"(Leakage Current & Electrical Strength at Operating Temperature)	-	500	-
"Cl. 14 IS 4159:2021"(Transient Over Voltage)	-	600	-
"Cl. 15 IS 4159:2021"(Moisture Resistance)	-	1000	-
"Cl. 16 IS 4159:2021"(Leakage Current and Electric strength)	-	800	-
"Cl. 17 IS 4159:2021"(Overload protection of transformers and associated circuits.)	-	800	-
"Cl. 18 IS 4159:2021"(Endurance)	-	800	-
"Cl. 19 IS 4159:2021"(Abnormal Operation)	-	500	-
"Cl. 20 IS 4159:2021"(Stability and mechanical Hazards)	-	500	-
"Cl. 21 IS 4159:2021"(Mechanical Strength)	-	300	-
"Cl. 22 IS 4159:2021"(Construction)	-	600	-
"Cl. 23 IS 4159:2021"(Internal Wiring)	-	300	-
"Cl. 24 IS 4159:2021"(Components)	-	300	-
"Cl. 25 IS 4159:2021"(Supply Connections and External Flexible Cables and Cords)	-	300	-
"Cl. 26 IS 4159:2021"(Terminal For External Conductors)	-	300	-
"Cl. 27 IS 4159:2021"(Provision For Earthing)	-	800	-
"Cl. 28 IS 4159:2021"(Screws and Connections)	-	300	-
"Cl. 29 IS 4159:2021"(Creepage Distances, Clearances And Distances Through Insulation)	-	500	-
"Cl. 30 IS 4159:2021"(Resistance To Heat, Fire And Tracking)	-	1000	-
"Cl. 31 IS 4159:2021"(Resistance To Rusting)	-	500	-
"Cl. 102 IS 4159:2021"(Leakage and hydrostatic strength (for oil heating elements))	-	1500	-
Cl.22.106(CONSTRUCTION)	-	600	-
"Cl. 6 IS 4159:2021"(Classification)	-	600	-
"Cl. 8 IS 4159:2021"(Protection against access to live parts)	-	600	-
"Cl. 9 IS 4159:2021"(Starting of motor operated appliances)	-	1000	-
"Cl. 10 IS 4159:2021"(Power Input and Current)	-	500	-
"Cl. 11 IS 4159:2021"(Heating)	-	600	-
"Cl. 13 IS 4159:2021"(Leakage Current & Electrical Strength at Operating Temperature)	-	500	-
"Cl. 14 IS 4159:2021"(Transient Over Voltage)	-	600	-
"Cl. 15 IS 4159:2021"(Moisture Resistance)	-	1000	-
"Cl. 16 IS 4159:2021"(Leakage Current and Electric strength)	-	800	-
"Cl. 17 IS 4159:2021"(Overload protection of transformers and associated circuits.)	-	800	-
"Cl. 18 IS 4159:2021"(Endurance)	-	800	-
"Cl. 19 IS 4159:2021"(Abnormal Operation)	-	800	-
"Cl. 20 IS 4159:2021"(Stability and mechanical Hazards)	-	500	-
"Cl. 21 IS 4159:2021"(Mechanical Strength)	-	300	-
"Cl. 22 IS 4159:2021"(Construction)	-	600	-
"Cl. 23 IS 4159:2021"(Internal Wiring)	-	300	-
"Cl. 25 IS 4159:2021"(Supply Connections and External Flexible Cables and Cords)	-	300	-
"Cl. 26 IS 4159:2021"(Terminal For External Conductors)	-	300	-
"Cl. 27 IS 4159:2021"(Provision For Earthing)	-	800	-
"Cl. 28 IS 4159:2021"(Screws and Connections)	-	300	-
"Cl. 29 IS 4159:2021"(Creepage Distances, Clearances And Distances Through Insulation)	-	500	-
"Cl. 30 IS 4159:2021"(Resistance To Heat, Fire And Tracking)	-	1000	-
"Cl. 31 IS 4159:2021"(Resistance To Rusting)	-	500	-
"Cl. 102 IS 4159:2021"(Leakage and hydrostatic strength (for oil heating elements))	-	1500	-
Cl.22.106(CONSTRUCTION)	-	600	-

23 Jun, 2028

-
Included w.e.f 06.11.2024 Exclusion : Cl 24 Components Cl 19.11.4.1 to 19.11.4.7 (EMI/EMC)

7872

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 3614 (2021)

Specification of Fire Doors and Assembly First Revision of IS 3614 Parts 1 2

ALL

490000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Integrity, Insulation)	-	490000	-
Cl 7.2.2(SIZE (width))	-	490000	-
Cl 7.2.2(SIZE (Height))	-	490000	-
Cl 7.3.2(SIZE (width))	-	490000	-
Cl 7.3.2(SIZE (Height))	-	490000	-
Cl 7.4.2(SIZE (width))	-	490000	-
Cl 7.4.2(SIZE (Height))	-	490000	-
Cl 7.5.2(SIZE (width))	-	490000	-
Cl 7.5.2(SIZE (Height))	-	490000	-
7.3.1(MOISTURE CONTENT)	-	490000	-
7.2.7(Vision Pane (Uninsulated door) Width)	-	490000	-
7.2.7(Vision Pane (Uninsulated door) Height)	-	490000	-
7.2.7(Vision Pane (Insulated door) Width)	-	490000	-
7.2.7(Vision Pane (Insulated door) Height)	-	490000	-
7.3.4(Vision Pane (Width))	-	490000	-
7.3.4(Vision Pane (Height))	-	490000	-
Cl-7.2.1(Material)	-	490000	-
Cl-7.2.4(Fire Door Frames)	-	490000	-
Cl-7.2.5(Door Leaf)	-	490000	-
Cl-7.2.8(Louvres)	-	490000	-
Cl-7.2.9(Builder’s Hardware)	-	490000	-
Cl-7.4.3(Construction)	-	490000	-
Cl-7.4.5(Operator)	-	490000	-
Cl-7.5.1(Material)	-	490000	-
Cl-7.5.3(Construction of Sliding Door Leaf)	-	490000	-
Cl-11.3.1(Walls)	-	490000	-
Cl-11.4.1(Closing Devices)	-	490000	-
Cl-11.4.2(Releasing Devices)	-	490000	-
Cl-11.4.3(Hardware)	-	490000	-
Cl-6(VISION PANE ON FIRE DOORS)	-	490000	-
Cl-7.2.3(Construction)	-	490000	-
Cl-7.2.6(Intumescent Seal)	-	490000	-
Cl-7.3.6(Builder’s Hardware)	-	490000	-
Cl-7.4.4(General Requirement of Fire Rated Rolling Shutter)	-	490000	-
Cl-7.5.4(General Requirement of Fire Rated Sliding Door)	-	490000	-
Cl-7.6(General Requirement of Fire Doors)	-	490000	-
Cl-7.3.3(Construction)	-	490000	-
4(Integrity, Insulation)	-	0	-
Cl 7.2.2(SIZE (width))	-	0	-
Cl 7.2.2(SIZE (Height))	-	0	-
Cl 7.3.2(SIZE (width))	-	0	-
Cl 7.3.2(SIZE (Height))	-	0	-
Cl 7.4.2(SIZE (width))	-	0	-
Cl 7.4.2(SIZE (Height))	-	0	-
Cl 7.5.2(SIZE (width))	-	0	-
Cl 7.5.2(SIZE (Height))	-	0	-
7.3.1(MOISTURE CONTENT)	-	0	-
7.2.7(Vision Pane (Uninsulated door) Width)	-	0	-
7.2.7(Vision Pane (Uninsulated door) Height)	-	0	-
7.2.7(Vision Pane (Insulated door) Width)	-	0	-
7.2.7(Vision Pane (Insulated door) Height)	-	0	-
7.3.4(Vision Pane (Width))	-	0	-
7.3.4(Vision Pane (Height))	-	0	-
Cl-7.2.1(Material)	-	0	-
Cl-7.2.4(Fire Door Frames)	-	0	-
Cl-7.2.5(Door Leaf)	-	0	-
Cl-7.2.8(Louvres)	-	0	-
Cl-7.2.9(Builder’s Hardware)	-	0	-
Cl-7.4.3(Construction)	-	0	-
Cl-7.4.5(Operator)	-	0	-
Cl-7.5.1(Material)	-	0	-
Cl-7.5.3(Construction of Sliding Door Leaf)	-	0	-
Cl-11.3.1(Walls)	-	0	-
Cl-11.4.1(Closing Devices)	-	0	-
Cl-11.4.2(Releasing Devices)	-	0	-
Cl-11.4.3(Hardware)	-	0	-
Cl-6(VISION PANE ON FIRE DOORS)	-	0	-
Cl-7.2.3(Construction)	-	0	-
Cl-7.2.6(Intumescent Seal)	-	0	-
Cl-7.3.6(Builder’s Hardware)	-	0	-
Cl-7.4.4(General Requirement of Fire Rated Rolling Shutter)	-	0	-
Cl-7.5.4(General Requirement of Fire Rated Sliding Door)	-	0	-
Cl-7.6(General Requirement of Fire Doors)	-	0	-
Cl-7.3.3(Construction)	-	0	-
Cl-7.4(Avg closing speed of fire rated rolling shutters)	-	0	-

08 Feb, 2027

-
Included w.e.f. 01.04.2025

7873

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 617 (1994)

Cast aluminium and its alloys - Ingots and castings for general engineering purposes - Specification (Third Revision)

16800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9(TOLERANCES ON DIMENSIONS OF CASTINGS)	-	100	-
7(FREEDOM FROM DEFECTS)	-	100	-
6.2(Hardness)	-	500	-
6, Table 2.(MECHANICAL PROPERTIES OF CASTINGS)	-	1000	-
5, Table 1.(Chemical Composition)	-	12800	-
17(Marking)	-	100	-
11()	-	200	-
11(Pressure Test)	-	200	-
17(Marking)	-	100	-
11(Pressure Test)	-	200	-
11(Pressure Test - IS 617)	-	200	-
13(Marking)	-	100	-
Table-1, Clause - 5.1(Copper)	-	800	-
Table-1, Clause - 5.1(Iron)	-	1000	-
Table-1, Clause - 5.1(Magnesium)	-	1000	-
Table-1, Clause - 5.1(Manganese)	-	1000	-
Table-1, Clause - 5.1(Tin)	-	1000	-
Table-1, Clause - 5.1(Silicon)	-	1000	-
Table-1, Clause - 5.1(Nickel)	-	1000	-
Table-1, Clause - 5.1(Zinc)	-	1000	-
Table-1, Clause - 5.1(Other elements (each))	-	1000	-
Table-1, Clause - 5.1(Other elements (Total))	-	1000	-
Table-1, Clause - 5.1(Aluminium)	-	1000	-
Table-1, Clause - 5.1(Titanium)	-	1000	-
Table-1, Clause - 5.1(Lead)	-	1000	-
9(TOLERANCES ON DIMENSIONS OF CASTINGS)	-	2000	-
7(FREEDOM FROM DEFECTS)	-	500	-
6.2(Hardness)	-	1000	-
6, Table 2.(MECHANICAL PROPERTIES OF CASTINGS)	-	5000	-
5, Table 1.(Chemical Composition)	-	4300	-
17(Marking)	-	500	-
11()	-	3500	-
11(Pressure Test)	-	3500	-
17(Marking)	-	500	-
11(Pressure Test)	-	3500	-
11(Pressure Test - IS 617)	-	3500	-
13(Marking)	-	500	-
Table-1, Clause - 5.1(Copper)	-	300	-
Table-1, Clause - 5.1(Iron)	-	300	-
Table-1, Clause - 5.1(Magnesium)	-	300	-
Table-1, Clause - 5.1(Manganese)	-	300	-
Table-1, Clause - 5.1(Tin)	-	300	-
Table-1, Clause - 5.1(Silicon)	-	300	-
Table-1, Clause - 5.1(Nickel)	-	300	-
Table-1, Clause - 5.1(Zinc)	-	300	-
Table-1, Clause - 5.1(Aluminium)	-	300	-
Table-1, Clause - 5.1(Titanium)	-	300	-
Table-1, Clause - 5.1(Lead)	-	300	-

31 Dec, 2026

-
-

7874

DELHI TEST HOUSE (50) KUNDLI SONIPAT

9127026

IS 17550 : PART 3 (2021)

Household Refrigerating Appliance- Characteristics and test methods Part 3 Energy Consumption and volume

150000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
"Cl. No. 6 "("DETERMINATION OF ENERGY CONSUMPTION")	-	25000	For Direct Cool - Rs. 150000/-, For Frost Free & Others - Rs. 150000/-
"Cl. No.4.8 & Annex H "(Determination Of Volume)	-	15000	-
"Cl. No. 6 "("DETERMINATION OF ENERGY CONSUMPTION")	-	25000	-
"Cl. No. 6 "("DETERMINATION OF ENERGY CONSUMPTION")	-	25000	-
"Cl. No.4.8 & Annex H "(Determination Of Volume)	-	15000	-
4.2(Steady State Power Consumption)	-	16000	-
4.3(Defrost and Recovery Energy and temperature change)	-	16000	-
4.4(Defrost Frequency)	-	16000	-
4.5(Number of Test Points and Interpolations)	-	16000	-
4.6(Load Processing Efficiency)	-	16000	-
4.7(Specified Auxiliaries)	-	15000	-
4.8(Volumn Determination)	-	15000	-
6(Determination of Energy Consumption)	-	25000	-
Annex B(Determination of Steady state Power & Temperature)	-	16000	-
Annex C(Defrost and Recovery Energy and temperature change)	-	16000	-
Annex D(Defrost Interval)	-	16000	-
Annex E(Interpolation of Results)	-	16000	-
Annex F(Energy Consumption of specified auxiliaries)	-	15000	-
Annex G(Determination of Load Processing Efficiency)	-	16000	-
Annex H(Determination of Volume)	-	15000	-

23 Jun, 2028

-
Included w.e.f. 03.05.2024

7875

DELHI TEST HOUSE, Azadhpur

8131406

IS 1328 (1996)

Veneered Decorative Plywood -Specification

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Dimensions & Tolerances - Length - Cl. 8)	-	500	NA
8(Dimensions & Tolerances - Width - Cl. 8)	-	500	NA
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	500	NA
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	500	NA
8(Dimensions & Tolerances - Squareness - Annexure C)	-	500	NA
9(Finish - Cl. 9.1, 8.3)	-	500	NA
9(Finish - Cl. 9.2, 8.3)	-	500	NA
11(Tests - Moisture Content - Part 1 of IS 1734)	-	1000	NA
11(Tests - Water Resistance Test - Cl. 11.1.2.1 [for MR Grade])	-	2000	NA
11(Tests - Water Resistance Test - Cl. 11.1.2.2 [for BWR Grade])	-	1000	NA
4.1(Grade - For BWR)	-	500	NA
4.1(Grade - For MR)	-	500	NA
4.2(Type - For Type 1)	-	500	NA
4.2(Type - For Type 2)	-	500	NA

17 Jun, 2027

-
Included w.e.f 16.05.2024

7876

DELHI TEST HOUSE, Azadhpur

8131406

IS 5509 (2021)

Fire Retardant Plywood - Specification ( Third Revision )

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.3 (Table 1)(b) 6 mm and above)	-	500	-
8.1(Dimensions)	-	1000	NA
8.2(Thickness)	-	500	NA
8.3, Taable-1 (i)(Tolerance- Length)	-	250	NA
9(WORKMANSHIP AND FINISH)	-	500	NA
11 (a)(For flammability)	-	500	NA
11 (b)(For flame penetration)	-	500	NA
11 (c)(For rate of burning)	-	500	NA
12.1 Table - 2 (i)(Moisture content, percent, Max)	-	2000	NA
12.1 Table - 2 (ii)(Flammability (see Note 1), minutes, Min)	-	2500	NA
12.1 Table - 2 (iii)(Flame penetration (see Note 2), minutes, Min)	-	2500	NA
12.1 Table - 2 (iv)(Rate of burning (see Note 3), minutes, Min)	-	2500	NA

17 Jun, 2027

-
Included w.e.f 16.05.2024

7877

DELHI TEST HOUSE (50) KUNDLI SONIPAT

9127026

IS 17550 : PART 2 (2021)

Household Refrigerating Appliance- Characteristics and test methods Part 2 Performance requirements

350000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No. 6(Storage Test)	-	38000	For Direct Cool - Rs. 170000/-, For Frost Free & Others - 350000
Cl. No. 7(Cooling Capacity Test)	-	38000	-
Cl. No. 8(Freezing Capacity Test)	-	38000	-
Cl. No. 9("Automatic Ice-Making Capacity Test")	-	38000	-
"Cl. No.4.6 & Annex A"(PULL-DOWN TEST)	-	48000	-
Cl. No.4.6(b) & Annex B("Wine Storage Appliances And Compartments; Storage Test")	-	44000	-
Cl. No.4.6(C) & AnnexC("Temperature Rise Test ")	-	45000	-
Cl. No.4.6(d) & Annex D("Water Vapour Condensation Test ")	-	46000	-
Cl. No.4.6(d) & Annex D("Water Vapour Condensation Test ")	-	46000	-
Cl. No. 6(Storage Test)	-	38000	-
Cl. No. 8(Freezing Capacity Test)	-	38000	-
Cl. No. 9("Automatic Ice-Making Capacity Test")	-	38000	-
"Cl. No.4.6 & Annex A"(PULL-DOWN TEST)	-	48000	-
Cl. No.4.6(b) & Annex B("Wine Storage Appliances And Compartments; Storage Test")	-	44000	--
Cl. No.4.6(C) & AnnexC("Temperature Rise Test ")	-	45000	-
Cl. No.4.6(d) & Annex D("Water Vapour Condensation Test ")	-	46000	-
4.2(Storage test)	-	38000	-
4.3(Cooling capacity test)	-	38000	-
4.5(Automatic ice-making capacity test)	-	38000	-
4.6(Other Tests)	-	183000	-
6(Storage test)	-	38000	-
7(Cooling capacity test)	-	38000	-
8(Freezing capacity test)	-	38000	-
9(Automatic ice-making capacity test)	-	38000	-
Annex A(Pull Down test)	-	48000	-
Annex B(Storage test of wine storage appliances and compartments)	-	44000	-
Annex C(Temperature Rise Test)	-	45000	-
Annex D(Water Vapour Condensation Test)	-	46000	-
4.4(Freezing Capacity Test)	-	38000	-
5(General Test Conditions)	-	15000	-

23 Jun, 2028

-
Included w.e.f. 03.05.2024

7878

Atmy Analytical Labs Pvt. Ltd., Faridabad

8167506

IS 1117 (2018)

Laboratory glassware - Single - Volume pipettes (Second Revision)

15500 View breakup
-

Clause No.	Exclusion	Remark
6.1.1&3(Marking)	-	-
3(Class of Accuracy)	-	-
4.1(Nominal capacities)	-	-
4.2(Accuracy)	-	-
5.1(Material)	-	-
5.1(Material)	-	-
5.1.1(Limit of Alkalinity)	-	-
5.2(Pattern of Pipette)	-	-
5.3(Workmanship & Finish)	-	-
5.4(i) Distance of graduation line from top of pipette.)	-	-
5.4(ii) Distance from graduation line to top of bulb(pattern 2))	-	-
5.4(iii)Distance from graduation line to tip of jet (Pattern 1))	-	-
5.4(iv) Wall thickness)	-	-
5.4(a) pattern 2 pipette of 1 and 2ml )	-	-
5.4(b) Other pipettes)	-	-
5.4(v) Dia. of safety bulb (if provided ))	-	-
5.4(vi)Distance from top of pipette to bottom of safety bulb )	-	-
5.4(vii) Overall length, L)	-	-
5.4(viii) Length of suction tube, L1 )	-	-
5.4(ix) Length of delivery tube, L2 )	-	-
5.4(x) Internal dia. of suction tube D1 )	-	-
5.4(xi) External dia. of bulb D2 )	-	-
5.4(xii) External dia. of delivery tube D3 )	-	-
5.5(Delivery Time)	-	-
5.5(Delivery Time)	-	-
5.6&7(Graduation line & Visibility )	-	-
6.1.2(Marking)	-	-
6.1.1&3(Marking)	-	-
3(Class of Accuracy)	-	-
4.1(Nominal capacities)	-	-
4.2(Accuracy)	-	-
5.1(Material)	-	-
5.1(Material)	-	-
5.1.1(Limit of Alkalinity)	-	-
5.2(Pattern of Pipette)	-	-
5.3(Workmanship & Finish)	-	-
5.4(i) Distance of graduation line from top of pipette.)	-	-
5.4(ii) Distance from graduation line to top of bulb(pattern 2))	-	-
5.4(iii)Distance from graduation line to tip of jet (Pattern 1))	-	-
5.4(iv) Wall thickness)	-	-
5.4(a) pattern 2 pipette of 1 and 2ml )	-	-
5.4(b) Other pipettes)	-	-
5.4(v) Dia. of safety bulb (if provided ))	-	-
5.4(vi)Distance from top of pipette to bottom of safety bulb )	-	-
5.4(vii) Overall length, L)	-	-
5.4(viii) Length of suction tube, L1 )	-	-
5.4(ix) Length of delivery tube, L2 )	-	-
5.4(x) Internal dia. of suction tube D1 )	-	-
5.4(xi) External dia. of bulb D2 )	-	-
5.4(xii) External dia. of delivery tube D3 )	-	-
5.5(Delivery Time)	-	-
5.5(Delivery Time)	-	-
5.6&7(Graduation line & Visibility )	-	-
6.1.2(Marking)	-	-
6.1.1&3(Marking)	-	-
3(Class of Accuracy)	-	-
4.1(Nominal capacities)	-	-
4.2(Accuracy)	-	-
5.1(Material)	-	-
5.1(Material)	-	-
5.1.1(Limit of Alkalinity)	-	-
5.2(Pattern of Pipette)	-	-
5.3(Workmanship & Finish)	-	-
5.4(i) Distance of graduation line from top of pipette.)	-	-
5.4(ii) Distance from graduation line to top of bulb(pattern 2))	-	-
5.4(iii)Distance from graduation line to tip of jet (Pattern 1))	-	-
5.4(iv) Wall thickness)	-	-
5.4(a) pattern 2 pipette of 1 and 2ml )	-	-
5.4(b) Other pipettes)	-	-
5.4(v) Dia. of safety bulb (if provided ))	-	-
5.4(vi)Distance from top of pipette to bottom of safety bulb )	-	-
5.4(vii) Overall length, L)	-	-
5.4(viii) Length of suction tube, L1 )	-	-
5.4(ix) Length of delivery tube, L2 )	-	-
5.4(x) Internal dia. of suction tube D1 )	-	-
5.4(xi) External dia. of bulb D2 )	-	-
5.4(xii) External dia. of delivery tube D3 )	-	-
5.5(Delivery Time)	-	-
5.5(Delivery Time)	-	-
5.6&7(Graduation line & Visibility )	-	-
6.1.2(Marking)	-	-

25 Feb, 2027

-
-

7879

DELHI TEST HOUSE (50) KUNDLI SONIPAT

9127026

IS 17550 : PART 1 (2021)

HOUSEHOLD REFRIGERATING APPLIANCES CHARACTERISTICS AND TEST METHODS Part 1 General Requirements

254000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
"Cl. No. 9 "(Testing The Air Tightness Of Door Or Lid Seal(S))	-	4000	-
"Cl. No.10 "(Testing The Opening Force Of Door(S) Or Lid(S))	-	4000	-
"Cl. No.11 "(Testing The Durability Of Hinges And Handles Of Door(S) And Lid(S))	-	15000	-
"Cl. No.12 "(Testing The Mechanical Strength Of Shelves And Similar Components)	-	4000	-
"Cl. No.14 "(Ice-Making Test (If Applicable))	-	12000	-
"Cl. No.15 "(Test For Absence Of Odour And Taste)	-	15000	-
"Cl. No.16 "(Safety Requirements)	-	23500	-
"Cl. No. 9 "(Testing The Air Tightness Of Door Or Lid Seal(S))	-	4000	-
"Cl. No.10 "(Testing The Opening Force Of Door(S) Or Lid(S))	-	4000	-
"Cl. No.11 "(Testing The Durability Of Hinges And Handles Of Door(S) And Lid(S))	-	15000	-
"Cl. No.12 "(Testing The Mechanical Strength Of Shelves And Similar Components)	-	4000	-
"Cl. No.14 "(Ice-Making Test (If Applicable))	-	12000	-
"Cl. No.15 "(Test For Absence Of Odour And Taste)	-	15000	-
"Cl. No.16(a) "(Protection against acess to live parts)	-	1500	-
"Cl. No.16(b) "(Power input and current)	-	2000	-
"Cl. No.16(c) "(Heating)	-	7000	-
"Cl. No.16(d) "(Leakage current and electric strength at operating temperature)	-	4000	-
"Cl. No.16(e) "(Moisture resistance)	-	5000	-
"Cl. No.16(f) "(Leakage current and electric strength)	-	4000	-
"Cl. No.20.3(a) "("Production Routine Test a)Leakage current test ")	-	1500	-
"Cl. No.20.3(b) "(b) Earth continuity tesT)	-	1500	-
"Cl. No.20.3(c) "(c) Electric strength)	-	1500	-
"Cl. No.8.11 "(Thermostat function test)	-	500	-
"Cl. No.5 "(Markings)	-	1000	-
4(Classification)	-	1000	-
5(Marking)	-	1000	-
6.2(Determination of Linear Dimensions)	-	1000	-
7(Instructions)	-	1000	-
8.2(Material and Finishes)	-	1000	-
8.3(Thermal Insulation and Air Tightness)	-	4000	-
8.4(Doors, Lids and Fittings)	-	4000	-
8.5(Shelves and Containers)	-	4000	-
8.6(Disposal of Defrost Water)	-	4000	-
8.7(Refrigerating System)	-	4000	-
8.8(Supply Cord)	-	4000	-
8.9(Compressor)	-	500	-
8.10(Temperature Sensing Controls (Thermostat))	-	500	-
8.11(Temperature Sensing Controls (Thermostat) Setting)	-	500	-
9(Testing the Air tightness of door or lid seal(s) before water vapour condensation test)	-	4000	-
9(Testing the Air tightness of door or lid seal(s) after water vapour condensation test)	-	4000	-
10(Testing the Opening force of door(s) or lid(s))	-	4000	-
11(Testing the Durability of hinges and handles of door(s) and lid(s))	-	15000	-
12(Testing the Mechanical strength of shelves and similar components)	-	4000	-
13(Water-vapour condensation test)	-	12000	-
14(Ice-making test (if applicable))	-	12000	-
15(Test for absence of odour and taste)	-	15000	-
16(a)(Protection against access to live parts)	-	1500	-
16(b)(Power input and current)	-	2000	-
16 (c(Heating)	-	7000	-
16(d)(Leakage current and electric strength at operating temperature)	-	4000	-
16(e)(Moisture resistance)	-	5000	-
16(f)(Leakage current and electric strength (high voltage after humidity))	-	4000	-
17(Packing)	-	500	-
18(Designation)	-	500	-
19(Instructions for Use and Maintenance)	-	500	-
20.3 (a)(Leakage Current Test)	-	1500	-
20.3 (b)(Earth Continuity Test)	-	1500	-
20.3 (c(Electric Strength Test)	-	1500	-
"Cl. No. 9 "(Testing The Air Tightness Of Door Or Lid Seal(S))	-	4000	-
"Cl. No.10 "(Testing The Opening Force Of Door(S) Or Lid(S))	-	4000	-
"Cl. No.11 "(Testing The Durability Of Hinges And Handles Of Door(S) And Lid(S))	-	15000	-
"Cl. No.12 "(Testing The Mechanical Strength Of Shelves And Similar Components)	-	4000	-
"Cl. No.14 "(Ice-Making Test (If Applicable))	-	12000	-
"Cl. No.15 "(Test For Absence Of Odour And Taste)	-	15000	-
"Cl. No.16 "(Safety Requirements)	-	23500	-
"Cl. No. 9 "(Testing The Air Tightness Of Door Or Lid Seal(S))	-	4000	-
"Cl. No.10 "(Testing The Opening Force Of Door(S) Or Lid(S))	-	4000	-
"Cl. No.11 "(Testing The Durability Of Hinges And Handles Of Door(S) And Lid(S))	-	15000	-
"Cl. No.12 "(Testing The Mechanical Strength Of Shelves And Similar Components)	-	4000	-
"Cl. No.14 "(Ice-Making Test (If Applicable))	-	12000	-
"Cl. No.15 "(Test For Absence Of Odour And Taste)	-	15000	-
"Cl. No.16(a) "(Protection against acess to live parts)	-	1500	-
"Cl. No.16(b) "(Power input and current)	-	2000	-
"Cl. No.16(c) "(Heating)	-	7000	-
"Cl. No.16(d) "(Leakage current and electric strength at operating temperature)	-	4000	-
"Cl. No.16(e) "(Moisture resistance)	-	5000	-
"Cl. No.16(f) "(Leakage current and electric strength)	-	4000	-
"Cl. No.20.3(a) "("Production Routine Test a)Leakage current test ")	-	1500	-
"Cl. No.20.3(b) "(b) Earth continuity tesT)	-	1500	-
"Cl. No.20.3(c) "(c) Electric strength)	-	1500	-
"Cl. No.8.11 "(Thermostat function test)	-	500	-
"Cl. No.5 "(Markings)	-	1000	-
4(Classification)	-	1000	-
5(Marking)	-	1000	-
6.2(Determination of Linear Dimensions)	-	1000	-
7(Instructions)	-	1000	-
8.2(Material and Finishes)	-	1000	-
8.3(Thermal Insulation and Air Tightness)	-	4000	-
8.4(Doors, Lids and Fittings)	-	4000	-
8.5(Shelves and Containers)	-	4000	-
8.6(Disposal of Defrost Water)	-	4000	-
8.7(Refrigerating System)	-	4000	-
8.8(Supply Cord)	-	4000	-
8.9(Compressor)	-	500	-
8.10(Temperature Sensing Controls (Thermostat))	-	500	-
8.11(Temperature Sensing Controls (Thermostat) Setting)	-	500	-
9(Testing the Air tightness of door or lid seal(s) before water vapour condensation test)	-	4000	-
9(Testing the Air tightness of door or lid seal(s) after water vapour condensation test)	-	4000	-
10(Testing the Opening force of door(s) or lid(s))	-	4000	-
11(Testing the Durability of hinges and handles of door(s) and lid(s))	-	15000	-
12(Testing the Mechanical strength of shelves and similar components)	-	4000	-
13(Water-vapour condensation test)	-	12000	-
14(Ice-making test (if applicable))	-	12000	-
15(Test for absence of odour and taste)	-	15000	-
16(a)(Protection against access to live parts)	-	1500	-
16(b)(Power input and current)	-	2000	-
16 (c(Heating)	-	7000	-
16(d)(Leakage current and electric strength at operating temperature)	-	4000	-
16(e)(Moisture resistance)	-	5000	-
16(f)(Leakage current and electric strength (high voltage after humidity))	-	4000	-
17(Packing)	-	500	-
18(Designation)	-	500	-
19(Instructions for Use and Maintenance)	-	500	-
20.3 (a)(Leakage Current Test)	-	1500	-
20.3 (b)(Earth Continuity Test)	-	1500	-
20.3 (c(Electric Strength Test)	-	1500	-

23 Jun, 2028

-
Included w.e.f. 03.05.2024

7880

Bharat Test House Pvt Ltd 781 Sonipat Haryana

9137826

IS 15787 (2008)

Switch - Socket - Outlets (Non - Interlock Type)

Switch-Socket-Outlets (Non-Interlock Type)

24000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 IS 15787:2008(Ratings )	-	10	-
Cl.7 IS 15787:2008(Classification)	-	10	-
Cl.8 IS 15787:2008(Marking )	-	30	-
Cl.9 IS 15787:2008(Checking of dimension)	-	200	-
Cl.10 IS 15787:2008(Protection against to electric shock )	-	500	-
Cl.11 IS 15787:2008(Provision for earthing )	-	500	-
Cl.12 IS 15787:2008(Terminals)	-	1000	-
Cl.13 IS 15787:2008(Construction of fixed socket outlet)	-	1000	-
Cl.14 IS 15787:2008(Construction of Plugs and Portable Socket- Outlet )	-	1000	-
Cl.15 IS 15787:2008(Interlocked Socket-outlet )	-	800	-
Cl.16 IS 15787:2008(Resistance to ageing,To harmful ingress of water and To Humidity)	-	1500	-
Cl.17 IS 15787:2008(Insulation resistance & electric strength )	-	500	-
Cl.18 IS 15787:2008(Operation of Earthing Contacts)	-	500	-
Cl.19 IS 15787:2008(Temperature rise )	-	3000	-
Cl.20 IS 15787:2008(Making & Breaking )	-	3500	-
Cl.21 IS 15787:2008(Normal operation )	-	2000	-
Cl.22 IS 15787:2008(Force necessary to withdraw the plug )	-	500	-
Cl.23 IS 15787:2008(Flexible cables & their connections)	-	500	-
Cl.24 IS 15787:2008(Mechanical strength)	-	700	-
Cl.25 IS 15787:2008(Resistance to heat )	-	3000	-
Cl.26 IS 15787:2008(Screws, current carrying parts & connections)	-	500	-
Cl.27 IS 15787:2008(Creepage distance, clearances & Distance through sealing compounds)	-	250	-
Cl.28 IS 15787:2008(Resistance of insulating material to Abnormal Heat , To Fire & To tracking )	-	1000	-
Cl.29 IS 15787:2008(Resistance to Rusting)	-	1000	-
Cl.30 IS 15787:2008(Additional tests on pins providing with insulating sleeves)	-	500	-

31 Dec, 2026

-
-

7881

DELHI TEST HOUSE, Azadhpur

8131406

IS 14587 (2023)

Prelaminated Medium Density Fibre Board - Specification

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-7(Finish)	-	500	NA
Cl-8.1(Dimensions of prelaminated MDF)	-	1500	NA
Cl-8.2(Tolerances)	-	500	NA
Cl-8.2.1(Edge straightness)	-	500	NA
Cl-9.1 S.No-(1), i(Density, kg/m3)	-	1000	NA
Cl-9.1 S.No-(1), ii(Variation from mean density, percent)	-	250	NA
Cl-9.1 S.No-(1), iii(Moisture content, percent)	-	1500	NA
Cl-9.1 S.No-(1), iv(Variation from mean moisture content, percent (absolute))	-	250	NA
Cl-9.1 S.No-(1), v(Linear expansion (thickness swelling in water), due to general absorption after 24 h soaking, percent, Max)	-	1000	NA
Cl-9.1 S.No-(1), vi(Internal bond strength, N/mm2, Min)	-	2000	NA
Cl-9.1 S.No-(1), viii(Modulus of rupture, N/mm2 , Min)	-	2500	NA
Cl-9.1 S.No-(1), ix(Modulus of elasticity, N/mm2 , Min)	-	2000	NA
Cl-9.1 S.No-(1), x,(Screw withdrawal strength, ????????, Min)	-	2000	NA
Cl-9.1 S.No-(1), xi(Formaldehyde content (Fc), mg/100 g for oven dry board)	-	1000	NA
Cl-9.1 S.No-(1), xii(Steady-state formaldehyde emission (Fc), mg/m3)	-	1000	NA
Cl-9.1 S.No-(1), xiii(Abrasion resistance in number of revolutions, Min, (Type 1 to 4))	-	2500	NA
Cl-9.1 S.No-(1), xiv(Resistance to steam/water vapours)	-	500	NA
Cl-9.1 S.No-(1), xv(Resistance to crack)	-	500	NA
Cl-9.1 S.No-(1), xvi(Resistance to a cigarette burn)	-	500	NA
Cl-9.1 S.No-(1), xvii(Resistance to stain)	-	1000	NA
Cl-9.1 S.No-(1), vii,a(After cyclic test)	-	8500	NA
Cl-9.1 S.No-(1), vii,b(After accelerated water resistance test)	-	8500	NA
Cl-7(Finish)	-	-	-
Cl-8.1(Dimensions of prelaminated MDF)	-	-	-
Cl-8.2(Tolerances)	-	-	-
Cl-8.2.1(Edge straightness)	-	-	-
Cl-9.1 S.No-(1), i(Density, kg/m3)	-	-	-
Cl-9.1 S.No-(1), ii(Variation from mean density, percent)	-	-	-
Cl-9.1 S.No-(1), iii(Moisture content, percent)	-	-	-
Cl-9.1 S.No-(1), iv(Variation from mean moisture content, percent (absolute))	-	-	-
Cl-9.1 S.No-(1), v(Linear expansion (thickness swelling in water), due to general absorption after 24 h soaking, percent, Max)	-	-	-
Cl-9.1 S.No-(1), vi(Internal bond strength, N/mm2, Min)	-	-	-
Cl-9.1 S.No-(1), viii(Modulus of rupture, N/mm2 , Min)	-	-	-
Cl-9.1 S.No-(1), ix(Modulus of elasticity, N/mm2 , Min)	-	-	-
Cl-9.1 S.No-(1), x,(Screw withdrawal strength, ????????, Min)	-	-	-
Cl-9.1 S.No-(1), xi(Formaldehyde content (Fc), mg/100 g for oven dry board)	-	-	-
Cl-9.1 S.No-(1), xii(Steady-state formaldehyde emission (Fc), mg/m3)	-	-	-
Cl-9.1 S.No-(1), xiii(Abrasion resistance in number of revolutions, Min, (Type 1 to 4))	-	-	-
Cl-9.1 S.No-(1), xiv(Resistance to steam/water vapours)	-	-	-
Cl-9.1 S.No-(1), xv(Resistance to crack)	-	-	-
Cl-9.1 S.No-(1), xvi(Resistance to a cigarette burn)	-	-	-
Cl-9.1 S.No-(1), xvii(Resistance to stain)	-	-	-
Cl-9.1 S.No-(1), vii,a(After cyclic test)	-	-	-
Cl-9.1 S.No-(1), vii,b(After accelerated water resistance test)	-	-	-

17 Jun, 2027

-
Included w.e.f 16.05.2024 Excluding Cl-11.2 (Specific Requirement) (Eco Mark)

7882

DELHI TEST HOUSE, Azadhpur

8131406

IS 12406 (2021)

Medium density fibre boards for general purpose - Specification

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clauses 5.2, 9 and 10.2.2(Density)	-	500	NA
Clauses 5.2, 9 and 10.2.2(Density)	-	500	NA
Clauses 5.2, 9 and 10.2.2(Variation from mean density)	-	500	NA
Clauses 5.2, 9 and 10.2.2(Moisture Content)	-	1000	NA
Clauses 5.2, 9 and 10.2.2(Variation from mean moisture content)	-	500	NA
Clauses 5.2, 9 and 10.2.2(Linear expansion (Thickness Swelling in Water) Due to general Absorption after 24h soaking)	-	1000	NA
Clauses 5.2, 9 and 10.2.2(Internal Bond Strength)	-	1000	NA
Clauses 5.2, 9 and 10.2.2(Internal Bond strength (i) (After Cyclic test) (ii) (After accelerated water resistance test))	-	1000	NA
Clauses 5.2, 9 and 10.2.2(Modulus of Rupture a) Avg. Value b) Min. Individual)	-	2000	NA
Clauses 5.2, 9 and 10.2.2(Modulus of Elasticity a) Avg. Value b) Min. Individual)	-	2000	NA
Clauses 5.2, 9 and 10.2.2(Screw withdrawl strength (i) Face (ii) Edge (For thickness >12mm))	-	1000	NA
Clauses 5.2, 9 and 10.2.2(Formaldehyde Content (i) For Formaldehyde Class, E1 (ii) For Formaldehyde Class, E2)	-	2000	NA
Clauses 5.2, 9 and 10.2.2(Steady State Formaldehyde emission (Fc (i) For Formaldehyde Class, E1 (ii) For Formaldehyde Class, E2)	-	2000	NA
8(DIMENSIONS AND TOLERANCES)	-	1000	NA

17 Jun, 2027

-
Included w.e.f 16.05.2024

7883

BIS, Eastern Regional Laboratory (ERL)

None

IS 13334 : Part 2 (2014)

Skimmed milk powder - Specification: Part 2 extra grade (First Revision)

Rs 10430/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Table 1 (ix) (Bacterial count (IS 5402))	-
Table 1 (x) (Coliform count (IS 5401 - Part 1))	-
Table 1 (xi) (Escherichia coli (IS 5887 - Part 1))	-
Table 1 (xii) (Coagulase positive Staphylococcus aureus (IS 5887 - Part 2))	-
Table 1 (xiii) (Salmonella (IS 5887 - Part 3))	-
Table 1 (xiv)(a) (Spore Count: a)Aerobic (Bacillus cereus) Type m (IS 5887 - Part 6))	-
Table 1 (xiv)(b) (Spore Count: b) Anaerobic (Sulfite reducing Clostridia) Type m (ISO 15213 : 2003))	-
Table 1 (xv) (Listeria monocytogenes (IS 14988 - Part 2 : 2001))	-
Clause no 4 (Description)	-
Cl.5.4 (Flavour & Taste)	-
Cl.5.7, Table 1, Sl No.-(i) (Moisture- IS 16072)	-
Cl.5.7, Table 1, Sl No.-(ii) (Milk protein in milk solids not fat- IS 72192)	-
Cl.5.7, Table 1, Sl No.-(iii) (Milk fat - IS 11721 or Annex B of IS 13334)	-
Cl.5.7, Table 1, Sl No.-(iv) (Insolubility index- IS 12759)	-
Cl.5.7, Table 1, Sl No.-(v) (Total ash (on dry basis) -Annex B of IS 14433)	-
Cl.5.7, Table 1, Sl No.-(vi) (Titratable acidity-IS 11766)	-
Cl.5.7, Table 1, Sl No.-(viii) (Scorched particles-IS 13500)	-
Cl 4.0 (Description)	-
Cl.5.4 (Flavour & Taste)	-

-
Shelf life to be declared; Excluding Lactate Content

7884

Atmy Analytical Labs Pvt. Ltd., Faridabad

8167506

IS 2619 (2018)

Glass beakers - Specification (Third Revision)

15500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5 Capacity (a)overflow of capacity of a beaker shall exceed the nominal capacity by at least 5 %;)	-	15500	-
Cl.5 Capacity (b) Distance between the levels corresponding to the nominal and overflow capacities shall be at least 10 mm.)	-	15500	-
Cl.6 Material(Beakers shall be made of borosilicate glass 3.3 in accordance with ISO 3585. The glass shall be reasonably free from residual strain and from visible glass defects which might impair the safety and performance of the beaker.)	-	15500	-
Cl.7.1 Dimensions(Low-form and tall-form beakers shall observe the dimensions specified in Table 1 and thick-walled beakers the dimensions specifed in Table 2. The tolerances on the external diameter shall be ±5 % of the value given in the tables.)	-	15500	-
Cl.7.2 Radius at base(Beakers having a nominal capacity of 250 ml or greater shall have an external radius at the junction between the base and the side of 10 % to 20 % of the external diameter.)	-	15500	-
Cl.7.2 Radius at base(Beakers having a nominal capacity less than 250 ml shall have a minimum radius at the junction between the base and the side of 5 % of the external diameter.)	-	15500	-
Cl.7.3 Wall thickness(Substantial local irregularities from the minimum values for wall thickness given in the tables shall be avoided. That means, the minimum wall thickness shall fall at no place below the values given in Table 1 and Table 2 and the beakers shall comply with the requirement for thermal shock endurance specified in 8.5.)	-	15500	-
Cl.8.1 Base(The design of the base shall enable the beaker to stand vertically on a plane horizontal surface without spinning or rocking)	-	15500	-
8.2 Upper edge(The side of the beaker shall be slightly flared near the brim in a smooth and regular curve. The diameter of the brim shall be of the order of 5 % to 15 % greater than the diameter of the body. The edge of the brim shall be finished in a plane parallel with that of the horizontal base.)	-	15500	-
Cl. 8.3 Spout(The spout shall be shaped so that, when the beaker is filled with water, the water may be poured in a regular stream clear of the side of the beaker. When the beaker is placed on a horizontal surface and filling is continued beyond its overflow capacity, the water shall first overflow from the spout and not from any other part of the brim.)	-	15500	-
Cl.8.4 Scale(Beakers may be provided with a scale, which should approximately indicate the volume contained in the beaker.)	-	15500	-
Cl.8.5 Thermal shock resistance(Beakers shall have a thermal shock resistance of 160 °C when tested in accordance with ISO 718.)	-	15500	-
Cl.5 Capacity (a)overflow of capacity of a beaker shall exceed the nominal capacity by at least 5 %;)	-	15500	-
Cl.5 Capacity (b) Distance between the levels corresponding to the nominal and overflow capacities shall be at least 10 mm.)	-	15500	-
Cl.6 Material(Beakers shall be made of borosilicate glass 3.3 in accordance with ISO 3585. The glass shall be reasonably free from residual strain and from visible glass defects which might impair the safety and performance of the beaker.)	-	15500	-
Cl.7.1 Dimensions(Low-form and tall-form beakers shall observe the dimensions specified in Table 1 and thick-walled beakers the dimensions specifed in Table 2. The tolerances on the external diameter shall be ±5 % of the value given in the tables.)	-	15500	-
Cl.7.2 Radius at base(Beakers having a nominal capacity of 250 ml or greater shall have an external radius at the junction between the base and the side of 10 % to 20 % of the external diameter.)	-	15500	-
Cl.7.2 Radius at base(Beakers having a nominal capacity less than 250 ml shall have a minimum radius at the junction between the base and the side of 5 % of the external diameter.)	-	15500	-
Cl.7.3 Wall thickness(Substantial local irregularities from the minimum values for wall thickness given in the tables shall be avoided. That means, the minimum wall thickness shall fall at no place below the values given in Table 1 and Table 2 and the beakers shall comply with the requirement for thermal shock endurance specified in 8.5.)	-	15500	-
Cl.8.1 Base(The design of the base shall enable the beaker to stand vertically on a plane horizontal surface without spinning or rocking)	-	15500	-
8.2 Upper edge(The side of the beaker shall be slightly flared near the brim in a smooth and regular curve. The diameter of the brim shall be of the order of 5 % to 15 % greater than the diameter of the body. The edge of the brim shall be finished in a plane parallel with that of the horizontal base.)	-	15500	-
Cl. 8.3 Spout(The spout shall be shaped so that, when the beaker is filled with water, the water may be poured in a regular stream clear of the side of the beaker. When the beaker is placed on a horizontal surface and filling is continued beyond its overflow capacity, the water shall first overflow from the spout and not from any other part of the brim.)	-	15500	-
Cl.8.4 Scale(Beakers may be provided with a scale, which should approximately indicate the volume contained in the beaker.)	-	15500	-
Cl.8.5 Thermal shock resistance(Beakers shall have a thermal shock resistance of 160 °C when tested in accordance with ISO 718.)	-	15500	-
Cl.5 Capacity (a)overflow of capacity of a beaker shall exceed the nominal capacity by at least 5 %;)	-	15500	-
Cl.5 Capacity (b) Distance between the levels corresponding to the nominal and overflow capacities shall be at least 10 mm.)	-	15500	-
Cl.6 Material(Beakers shall be made of borosilicate glass 3.3 in accordance with ISO 3585. The glass shall be reasonably free from residual strain and from visible glass defects which might impair the safety and performance of the beaker.)	-	15500	-
Cl.7.1 Dimensions(Low-form and tall-form beakers shall observe the dimensions specified in Table 1 and thick-walled beakers the dimensions specifed in Table 2. The tolerances on the external diameter shall be ±5 % of the value given in the tables.)	-	15500	-
Cl.7.2 Radius at base(Beakers having a nominal capacity of 250 ml or greater shall have an external radius at the junction between the base and the side of 10 % to 20 % of the external diameter.)	-	15500	-
Cl.7.2 Radius at base(Beakers having a nominal capacity less than 250 ml shall have a minimum radius at the junction between the base and the side of 5 % of the external diameter.)	-	15500	-
Cl.7.3 Wall thickness(Substantial local irregularities from the minimum values for wall thickness given in the tables shall be avoided. That means, the minimum wall thickness shall fall at no place below the values given in Table 1 and Table 2 and the beakers shall comply with the requirement for thermal shock endurance specified in 8.5.)	-	15500	-
Cl.8.1 Base(The design of the base shall enable the beaker to stand vertically on a plane horizontal surface without spinning or rocking)	-	15500	-
8.2 Upper edge(The side of the beaker shall be slightly flared near the brim in a smooth and regular curve. The diameter of the brim shall be of the order of 5 % to 15 % greater than the diameter of the body. The edge of the brim shall be finished in a plane parallel with that of the horizontal base.)	-	15500	-
Cl. 8.3 Spout(The spout shall be shaped so that, when the beaker is filled with water, the water may be poured in a regular stream clear of the side of the beaker. When the beaker is placed on a horizontal surface and filling is continued beyond its overflow capacity, the water shall first overflow from the spout and not from any other part of the brim.)	-	15500	-
Cl.8.4 Scale(Beakers may be provided with a scale, which should approximately indicate the volume contained in the beaker.)	-	15500	-
Cl.8.5 Thermal shock resistance(Beakers shall have a thermal shock resistance of 160 °C when tested in accordance with ISO 718.)	-	15500	-
Cl.5 Capacity (a)overflow of capacity of a beaker shall exceed the nominal capacity by at least 5 %;)	-	0	-
Cl.5 Capacity (b) Distance between the levels corresponding to the nominal and overflow capacities shall be at least 10 mm.)	-	0	-
Cl.6 Material(Beakers shall be made of borosilicate glass 3.3 in accordance with ISO 3585. The glass shall be reasonably free from residual strain and from visible glass defects which might impair the safety and performance of the beaker.)	-	0	-
Cl.7.1 Dimensions(Low-form and tall-form beakers shall observe the dimensions specified in Table 1 and thick-walled beakers the dimensions specifed in Table 2. The tolerances on the external diameter shall be ±5 % of the value given in the tables.)	-	0	-
Cl.7.2 Radius at base(Beakers having a nominal capacity of 250 ml or greater shall have an external radius at the junction between the base and the side of 10 % to 20 % of the external diameter.)	-	0	-
Cl.7.2 Radius at base(Beakers having a nominal capacity less than 250 ml shall have a minimum radius at the junction between the base and the side of 5 % of the external diameter.)	-	0	-
Cl.7.3 Wall thickness(Substantial local irregularities from the minimum values for wall thickness given in the tables shall be avoided. That means, the minimum wall thickness shall fall at no place below the values given in Table 1 and Table 2 and the beakers shall comply with the requirement for thermal shock endurance specified in 8.5.)	-	0	-
Cl.8.1 Base(The design of the base shall enable the beaker to stand vertically on a plane horizontal surface without spinning or rocking)	-	0	-
8.2 Upper edge(The side of the beaker shall be slightly flared near the brim in a smooth and regular curve. The diameter of the brim shall be of the order of 5 % to 15 % greater than the diameter of the body. The edge of the brim shall be finished in a plane parallel with that of the horizontal base.)	-	0	-
Cl. 8.3 Spout(The spout shall be shaped so that, when the beaker is filled with water, the water may be poured in a regular stream clear of the side of the beaker. When the beaker is placed on a horizontal surface and filling is continued beyond its overflow capacity, the water shall first overflow from the spout and not from any other part of the brim.)	-	0	-
Cl.8.4 Scale(Beakers may be provided with a scale, which should approximately indicate the volume contained in the beaker.)	-	0	-
Cl.8.5 Thermal shock resistance(Beakers shall have a thermal shock resistance of 160 °C when tested in accordance with ISO 718.)	-	0	-
Cl.5 Capacity (a)overflow of capacity of a beaker shall exceed the nominal capacity by at least 5 %;)	-	0	-
Cl.5 Capacity (b) Distance between the levels corresponding to the nominal and overflow capacities shall be at least 10 mm.)	-	0	-
Cl.6 Material(Beakers shall be made of borosilicate glass 3.3 in accordance with ISO 3585. The glass shall be reasonably free from residual strain and from visible glass defects which might impair the safety and performance of the beaker.)	-	0	-
Cl.7.1 Dimensions(Low-form and tall-form beakers shall observe the dimensions specified in Table 1 and thick-walled beakers the dimensions specifed in Table 2. The tolerances on the external diameter shall be ±5 % of the value given in the tables.)	-	0	-
Cl.7.2 Radius at base(Beakers having a nominal capacity of 250 ml or greater shall have an external radius at the junction between the base and the side of 10 % to 20 % of the external diameter.)	-	0	-
Cl.7.2 Radius at base(Beakers having a nominal capacity less than 250 ml shall have a minimum radius at the junction between the base and the side of 5 % of the external diameter.)	-	0	-
Cl.7.3 Wall thickness(Substantial local irregularities from the minimum values for wall thickness given in the tables shall be avoided. That means, the minimum wall thickness shall fall at no place below the values given in Table 1 and Table 2 and the beakers shall comply with the requirement for thermal shock endurance specified in 8.5.)	-	0	-
Cl.8.1 Base(The design of the base shall enable the beaker to stand vertically on a plane horizontal surface without spinning or rocking)	-	0	-
8.2 Upper edge(The side of the beaker shall be slightly flared near the brim in a smooth and regular curve. The diameter of the brim shall be of the order of 5 % to 15 % greater than the diameter of the body. The edge of the brim shall be finished in a plane parallel with that of the horizontal base.)	-	0	-
Cl. 8.3 Spout(The spout shall be shaped so that, when the beaker is filled with water, the water may be poured in a regular stream clear of the side of the beaker. When the beaker is placed on a horizontal surface and filling is continued beyond its overflow capacity, the water shall first overflow from the spout and not from any other part of the brim.)	-	0	-
Cl.8.4 Scale(Beakers may be provided with a scale, which should approximately indicate the volume contained in the beaker.)	-	0	-
Cl.8.5 Thermal shock resistance(Beakers shall have a thermal shock resistance of 160 °C when tested in accordance with ISO 718.)	-	0	-
Cl.5 Capacity (a)overflow of capacity of a beaker shall exceed the nominal capacity by at least 5 %;)	-	0	-
Cl.5 Capacity (b) Distance between the levels corresponding to the nominal and overflow capacities shall be at least 10 mm.)	-	0	-
Cl.6 Material(Beakers shall be made of borosilicate glass 3.3 in accordance with ISO 3585. The glass shall be reasonably free from residual strain and from visible glass defects which might impair the safety and performance of the beaker.)	-	0	-
Cl.7.1 Dimensions(Low-form and tall-form beakers shall observe the dimensions specified in Table 1 and thick-walled beakers the dimensions specifed in Table 2. The tolerances on the external diameter shall be ±5 % of the value given in the tables.)	-	0	-
Cl.7.2 Radius at base(Beakers having a nominal capacity of 250 ml or greater shall have an external radius at the junction between the base and the side of 10 % to 20 % of the external diameter.)	-	0	-
Cl.7.2 Radius at base(Beakers having a nominal capacity less than 250 ml shall have a minimum radius at the junction between the base and the side of 5 % of the external diameter.)	-	0	-
Cl.7.3 Wall thickness(Substantial local irregularities from the minimum values for wall thickness given in the tables shall be avoided. That means, the minimum wall thickness shall fall at no place below the values given in Table 1 and Table 2 and the beakers shall comply with the requirement for thermal shock endurance specified in 8.5.)	-	0	-
Cl.8.1 Base(The design of the base shall enable the beaker to stand vertically on a plane horizontal surface without spinning or rocking)	-	0	-
8.2 Upper edge(The side of the beaker shall be slightly flared near the brim in a smooth and regular curve. The diameter of the brim shall be of the order of 5 % to 15 % greater than the diameter of the body. The edge of the brim shall be finished in a plane parallel with that of the horizontal base.)	-	0	-
Cl. 8.3 Spout(The spout shall be shaped so that, when the beaker is filled with water, the water may be poured in a regular stream clear of the side of the beaker. When the beaker is placed on a horizontal surface and filling is continued beyond its overflow capacity, the water shall first overflow from the spout and not from any other part of the brim.)	-	0	-
Cl.8.4 Scale(Beakers may be provided with a scale, which should approximately indicate the volume contained in the beaker.)	-	0	-
Cl.8.5 Thermal shock resistance(Beakers shall have a thermal shock resistance of 160 °C when tested in accordance with ISO 718.)	-	0	-

25 Feb, 2027

-
-

7885

Atmy Analytical Labs Pvt. Ltd., Faridabad

8167506

IS 915 (2012)

Laboratory glassware - One - Mark volumetric flasks (Third Revision)

15500 View breakup
-

Clause No.	Exclusion	Remark
8.1(Material)	-	-
Table 1(Nominal Capacity)	-	-
Table 1(Internal Neck Diameter)	-	-
Table 1(Distance of graduation line)	-	-
Table 1(Overall Height)	-	-
Table 1(Bulb Diameter)	-	-
Table 1(Base Diameter)	-	-
Table 1(Wall Thickness)	-	-
Table 1(Ground joint k4)	-	-
Table 1(Ground joint k6)	-	-
8.3(Shape)	-	-
8.4(Neck)	-	-
8.5(Stopper)	-	-
8.6(Dimensions)	-	-
9.0(Graduation Line)	-	-
Table-2(Nominal capacity)	-	-
Table-2(Internal neck diameter)	-	-
Table-2(Distance of graduation line 1))	-	-
Table-2(Overall height 2))	-	-
Table-2(Bulb diameter)	-	-
Table-2(Base diameter)	-	-
Table-2(Wall thickness)	-	-
Table-2(Ground joint 3) k4)	-	-
Table-2(Ground joint 3) k6)	-	-
12.1(Visibility of graduation line, figures and marking)	-	-
12.2(Visibility of graduation line, figures and marking)	-	-
Clause. 7.0(Accuracy)	-	-
Table 1(Nominal Capacity)	-	-
9.0(Graduation Line)	-	-
Table-2(Nominal capacity)	-	-
Table-2(Internal neck diameter)	-	-
Table-2(Distance of graduation line 1))	-	-
Table-2(Overall height 2))	-	-
Table-2(Bulb diameter)	-	-
Table-2(Base diameter)	-	-
Table-2(Wall thickness)	-	-
Table-2(Ground joint 3) k4)	-	-
Table-2(Ground joint 3) k6)	-	-
12.1(Visibility of graduation line, figures and marking)	-	-
12.2(Visibility of graduation line, figures and marking)	-	-
Clause. 7.0(Accuracy)	-	-
Table 1(Nominal Capacity)	-	-
9.0(Graduation Line)	-	-
Table-2(Nominal capacity)	-	-
Table-2(Internal neck diameter)	-	-
Table-2(Distance of graduation line 1))	-	-
Table-2(Overall height 2))	-	-
Table-2(Bulb diameter)	-	-
Table-2(Base diameter)	-	-
Table-2(Wall thickness)	-	-
Table-2(Ground joint 3) k4)	-	-
Table-2(Ground joint 3) k6)	-	-
12.1(Visibility of graduation line, figures and marking)	-	-
12.2(Visibility of graduation line, figures and marking)	-	-
Clause. 7.0(Accuracy)	-	-

25 Feb, 2027

-
-

7886

Atmy Analytical Labs Pvt. Ltd., Faridabad

8167506

IS 878 (2008)

Laboratory glassware - Graduated measuring cylinders (Second Revision)

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table-1(Nominal capacity)	-	14500	-
Table-1(Overall height)	-	14500	-
Table-1(Distance from top of scale to top of cylinder)	-	14500	-
Table-1(Internal height to highest graduation line)	-	14500	-
Table-1(Sub-divisions)	-	14500	-
Table-1(capacity at lowest graduation line)	-	14500	-
Cl-9.1(Wall thickness)	-	14500	-
Cl-9.2(Stability)	-	14500	-
Cl-9.3(Base)	-	14500	-
Cl-9.4(Rim and spout)	-	14500	-
Cl-9.5(Neck and stopper)	-	14500	-
Cl-9.6, Table-2(Nominal capacity)	-	14500	-
Cl-9.6, Table-2(Overall height)	-	14500	-
Cl-9.6, Table-2(Distance from top of scale to top of cylinder)	-	14500	-
Cl-9.6, Table-2(Internal height to highest graduation line)	-	14500	-
Cl-9.6, Table-2(Sub divisions)	-	14500	-
Cl-9.6, Table-2(capacity at lowest graduation line)	-	14500	-
Cl-10.1(Graduation)	-	14500	-
Cl-10.2(Figuring)	-	14500	-
Cl-11(Accuracy testing)	-	14500	-
Cl-13(Visibility of graduation lines, figures and marking)	-	14500	-
Table-1(capacity at lowest graduation line)	-	0	-
Cl-9.1(Wall thickness)	-	0	-
Cl-9.2(Stability)	-	0	-
Cl-9.3(Base)	-	0	-
Cl-9.4(Rim and spout)	-	0	-
Cl-9.5(Neck and stopper)	-	0	-
Cl-9.6, Table-2(Nominal capacity)	-	0	-
Cl-9.6, Table-2(Overall height)	-	0	-
Cl-9.6, Table-2(Distance from top of scale to top of cylinder)	-	0	-
Cl-9.6, Table-2(Internal height to highest graduation line)	-	0	-
Cl-9.6, Table-2(Sub divisions)	-	0	-
Cl-9.6, Table-2(capacity at lowest graduation line)	-	0	-
Cl-10.1(Graduation)	-	0	-
Cl-10.2(Figuring)	-	0	-
Cl-11(Accuracy testing)	-	0	-
Cl-13(Visibility of graduation lines, figures and marking)	-	0	-
Clause. 8.0(Material)	-	0	-
Table- 1(Max. Permissible Error (Class- a))	-	0	-
Table- 1(Max. Permissible Error (Class- b))	-	0	-
Table- 2(Max. Permissible Error (Type-2))	-	0	-

25 Feb, 2027

-
-

7887

DELHI TEST HOUSE, Azadhpur

8131406

IS 13428 (2024)

PACKAGED NATURAL MINERAL WATER - SPECIFICATION Third Revision

20500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.1(Escherichia coli)	-	500	NA
6.1.2(Coliform)	-	500	NA
6.1.3(Faecal Streptococci)	-	500	NA
6.1.4(Sulphite Reducing Anaerobe)	-	500	NA
6.1.5(Pseudomonas aeruginosa)	-	500	NA
6.1.6(Yeast and moould)	-	500	NA
6.1.7(Salmonella)	-	500	NA
6.1.8(Vibrio Cholera)	-	500	NA
6.2/Table 1/i(Colour)	-	200	NA
6.2/Table 1/ii(Odour)	-	250	NA
6.2/Table 1/iii(Taste)	-	250	NA
6.2/Table 1/iv(Turbidity)	-	250	NA
6.2/Table 1/v(Total Dissoved)	-	250	NA
6.2/Table 1/vi(pH Value)	-	200	NA
6.2/Table 2/i(Nitrate)	-	250	NA
6.2/Table 2/ii(Nitrite)	-	250	NA
6.2/Table 2/iii(Sulphide)	-	250	NA
6.2/Table 2/iv(Manganese)	-	250	NA
6.2/Table 2/v(Copper)	-	250	NA
6.2/Table 2/vi(Fluoride)	-	250	NA
6.2/Table 2/vii(Barium)	-	250	NA
6.2/Table 2/viii(Antimony)	-	250	NA
6.2/Table 2/ix(Borate)	-	250	NA
6.2/Table 2/x(Silver)	-	250	NA
6.2/Table 2/xi(Chloride)	-	250	NA
6.2/Table 2/xii(Sulphate)	-	250	NA
6.2/Table 2/xiii(Magnesium)	-	250	NA
6.2/Table 2/xiv(Calcium)	-	250	NA
6.2/Table 2/xv(Sodium)	-	250	NA
6.2/Table 2/xvi(Alkalinity)	-	250	NA
6.2/Table 2/xvii(Selenium)	-	250	NA
6.2/Table 2/xviii(Mineral Oil)	-	250	NA
6.2/Table 2/xix(Phenolic Compounds)	-	250	NA
6.2/Table 2/xx(Anionic Surface active agents)	-	250	NA
6.2/Table 3/i(Arsenic)	-	250	NA
6.2/Table 3/ii(Cadmium)	-	250	NA
6.2/Table 3/iii(Cyanide)	-	250	NA
6.2/Table 3/iv(Chromium)	-	250	NA
6.2/Table 3/v(Mercury)	-	250	NA
6.2/Table 3/vi(Lead)	-	250	NA
6.2/Table 3/vii(Nickel)	-	250	NA
6.2/Table 3/viii(Polychlorinated biphenyle (PCB))	-	200	NA
6.2/Table 3/ix(Polynuclear aromatic hydrocarbons)	-	200	NA
Cl- 6.3, Annex N (i)(P,P -DDE)	-	200	NA
Cl- 6.3, Annex N (i)(O,P -DDE)	-	200	NA
Cl- 6.3, Annex N (i)(O,P -DDT)	-	200	NA
Cl-6.3, Annex N (i)(P,P- DDD)	-	200	NA
Cl-6.3, Annex N (i)(O,P-DDD)	-	200	NA
Cl- 6.3, Annex N (ii)(γ-HCH (lindane))	-	200	NA
Cl- 6.3, Annex N (iii)(α-HCH)	-	200	NA
Cl- 6.3, Annex N (iii)(β-HCH)	-	200	NA
Cl- 6.3, Annex N (iii)(δ - HCH)	-	200	NA
Cl- 6.3, Annex N (iv)(Endosulfan - α)	-	200	NA
Cl- 6.3, Annex N (iv)(Endosulfan - β)	-	200	NA
Cl- 6.3, Annex N (iv)(Endosulfan - sulphate)	-	200	NA
Cl- 6.3, Annex N (v)(Monocrotophos)	-	200	NA
Cl- 6.3, Annex N (viii)(Phorate and its oxygen analogue)	-	200	NA
Cl- 6.3, Annex N (viii)(phorate sulphoxide)	-	200	NA
Cl- 6.3, Annex N (viii)(phorate sulphone)	-	200	NA
Cl- 6.3, Annex N (ix)(2,4-D)	-	200	NA
Cl- 6.3, Annex N (x)(Butachlor)	-	200	NA
Cl- 6.3, Annex N (xi)(Isoproturon)	-	200	NA
Cl- 6.3, Annex N (xii)(Alachlor)	-	200	NA
Cl- 6.3, Annex N (xiii)(Atrazine)	-	200	NA
Cl- 6.3, Annex N (xiv)(Methyl parathion)	-	200	NA
Cl- 6.3, Annex N (xiv)(Methyl paraoxon)	-	200	NA
Cl- 6.3, Annex N (xv)(Malathion)	-	200	NA
Cl- 6.3, Annex N (xv)(malaoxon)	-	200	NA
Cl- 6.3, Annex N (xvi)(Aldrin)	-	200	NA
6.2/Table 3/x(Uranium)	-	200	NA
Cl- 6.3, Annex N (i)(P,P- DDT)	-	200	NA
Cl- 6.3, Annex N (vi)(Ethion)	-	200	NA
Cl- 6.3, Annex N (vii)(Chlorpyrifos)	-	200	NA
6.1.1(Escherichia coli)	-	500	NA
6.1.2(Coliform)	-	500	NA
6.1.3(Faecal Streptococci)	-	500	NA
6.1.4(Sulphite Reducing Anaerobe)	-	500	NA
6.1.5(Pseudomonas aeruginosa)	-	500	NA
6.1.6(Yeast and moould)	-	500	NA
6.1.7(Salmonella)	-	500	NA
6.1.8(Vibrio Cholera)	-	500	NA
6.2/Table 1/i(Colour)	-	200	NA
6.2/Table 1/ii(Odour)	-	200	NA
6.2/Table 1/iii(Taste)	-	200	NA
6.2/Table 1/iv(Turbidity)	-	200	NA
6.2/Table 1/v(Total Dissoved)	-	200	NA
6.2/Table 1/vi(pH Value)	-	200	NA
6.2/Table 2/i(Nitrate)	-	250	NA
6.2/Table 2/ii(Nitrite)	-	250	NA
6.2/Table 2/iii(Sulphide)	-	250	NA
6.2/Table 2/iv(Manganese)	-	250	NA
6.2/Table 2/v(Copper)	-	250	NA
6.2/Table 2/vi(Fluoride)	-	250	NA
6.2/Table 2/vii(Barium)	-	250	NA
6.2/Table 2/viii(Antimony)	-	250	NA
6.2/Table 2/ix(Borate)	-	250	NA
6.2/Table 2/x(Silver)	-	250	NA
6.2/Table 2/xi(Chloride)	-	250	NA
6.2/Table 2/xii(Sulphate)	-	250	NA
6.2/Table 2/xiii(Magnesium)	-	250	NA
6.2/Table 2/xiv(Calcium)	-	250	NA
6.2/Table 2/xv(Sodium)	-	250	NA
6.2/Table 2/xvi(Alkalinity)	-	250	NA
6.2/Table 2/xvii(Selenium)	-	250	NA
6.2/Table 2/xviii(Mineral Oil)	-	250	NA
6.2/Table 2/xix(Phenolic Compounds)	-	250	NA
6.2/Table 2/xx(Anionic Surface active agents)	-	250	NA
6.2/Table 3/i(Arsenic)	-	250	NA
6.2/Table 3/ii(Cadmium)	-	250	NA
6.2/Table 3/iii(Cyanide)	-	250	NA
6.2/Table 3/iv(Chromium)	-	250	NA
6.2/Table 3/v(Mercury)	-	250	NA
6.2/Table 3/vi(Lead)	-	250	NA
6.2/Table 3/vii(Nickel)	-	250	NA
6.2/Table 3/viii(Polychlorinated biphenyle (PCB))	-	250	NA
6.2/Table 3/ix(Polynuclear aromatic hydrocarbons)	-	250	NA
Cl- 6.3, Annex N (i)(P,P -DDE)	-	250	NA
Cl- 6.3, Annex N (i)(O,P -DDE)	-	250	NA
Cl- 6.3, Annex N (i)(O,P -DDT)	-	250	NA
Cl-6.3, Annex N (i)(P,P- DDD)	-	250	NA
Cl-6.3, Annex N (i)(O,P-DDD)	-	250	NA
Cl- 6.3, Annex N (ii)(γ-HCH (lindane))	-	250	NA
Cl- 6.3, Annex N (iii)(α-HCH)	-	250	NA
Cl- 6.3, Annex N (iii)(β-HCH)	-	250	NA
Cl- 6.3, Annex N (iii)(δ - HCH)	-	250	NA
Cl- 6.3, Annex N (iv)(Endosulfan - α)	-	250	NA
Cl- 6.3, Annex N (iv)(Endosulfan - β)	-	250	NA
Cl- 6.3, Annex N (iv)(Endosulfan - sulphate)	-	250	NA
Cl- 6.3, Annex N (v)(Monocrotophos)	-	250	NA
Cl- 6.3, Annex N (viii)(Phorate and its oxygen analogue)	-	250	NA
Cl- 6.3, Annex N (viii)(phorate sulphoxide)	-	250	NA
Cl- 6.3, Annex N (viii)(phorate sulphone)	-	250	NA
Cl- 6.3, Annex N (ix)(2,4-D)	-	250	NA
Cl- 6.3, Annex N (x)(Butachlor)	-	250	NA
Cl- 6.3, Annex N (xi)(Isoproturon)	-	250	NA
Cl- 6.3, Annex N (xii)(Alachlor)	-	250	NA
Cl- 6.3, Annex N (xiii)(Atrazine)	-	250	NA
Cl- 6.3, Annex N (xiv)(Methyl parathion)	-	250	NA
Cl- 6.3, Annex N (xiv)(Methyl paraoxon)	-	250	NA
Cl- 6.3, Annex N (xv)(Malathion)	-	250	NA
Cl- 6.3, Annex N (xv)(malaoxon)	-	250	NA
Cl- 6.3, Annex N (xvi)(Aldrin)	-	250	NA
6.2/Table 3/x(Uranium)	-	250	NA
Cl- 6.3, Annex N (i)(P,P- DDT)	-	250	NA
Cl- 6.3, Annex N (vi)(Ethion)	-	250	NA
Cl- 6.3, Annex N (vii)(Chlorpyrifos)	-	250	NA
6.1.1(Escherichia coli)	-	-	-
6.1.2(Coliform)	-	-	-
6.1.3(Faecal Streptococci)	-	-	-
6.1.4(Sulphite Reducing Anaerobe)	-	-	-
6.1.5(Pseudomonas aeruginosa)	-	-	-
6.1.6(Yeast and moould)	-	-	-
6.1.7(Salmonella)	-	-	-
6.1.8(Vibrio Cholera)	-	-	-
6.2/Table 1/i(Colour)	-	-	-
6.2/Table 1/ii(Odour)	-	-	-
6.2/Table 1/iii(Taste)	-	-	-
6.2/Table 1/iv(Turbidity)	-	-	-
6.2/Table 1/v(Total Dissoved)	-	-	-
6.2/Table 1/vi(pH Value)	-	-	-
6.2/Table 2/i(Nitrate)	-	-	-
6.2/Table 2/ii(Nitrite)	-	-	-
6.2/Table 2/iii(Sulphide)	-	-	-
6.2/Table 2/iv(Manganese)	-	-	-
6.2/Table 2/v(Copper)	-	-	-
6.2/Table 2/vi(Fluoride)	-	-	-
6.2/Table 2/vii(Barium)	-	-	-
6.2/Table 2/viii(Antimony)	-	-	-
6.2/Table 2/ix(Borate)	-	-	-
6.2/Table 2/x(Silver)	-	-	-
6.2/Table 2/xi(Chloride)	-	-	-
6.2/Table 2/xii(Sulphate)	-	-	-
6.2/Table 2/xiii(Magnesium)	-	-	-
6.2/Table 2/xiv(Calcium)	-	-	-
6.2/Table 2/xv(Sodium)	-	-	-
6.2/Table 2/xvi(Alkalinity)	-	-	-
6.2/Table 2/xvii(Selenium)	-	-	-
6.2/Table 2/xviii(Mineral Oil)	-	-	-
6.2/Table 2/xix(Phenolic Compounds)	-	-	-
6.2/Table 2/xx(Anionic Surface active agents)	-	-	-
6.2/Table 3/i(Arsenic)	-	-	-
6.2/Table 3/ii(Cadmium)	-	-	-
6.2/Table 3/iii(Cyanide)	-	-	-
6.2/Table 3/iv(Chromium)	-	-	-
6.2/Table 3/v(Mercury)	-	-	-
6.2/Table 3/vi(Lead)	-	-	-
6.2/Table 3/vii(Nickel)	-	-	-
6.2/Table 3/viii(Polychlorinated biphenyle (PCB))	-	-	-
6.2/Table 3/ix(Polynuclear aromatic hydrocarbons)	-	-	-
Cl- 6.3, Annex N (i)(P,P -DDE)	-	-	-
Cl- 6.3, Annex N (i)(O,P -DDE)	-	-	-
Cl- 6.3, Annex N (i)(O,P -DDT)	-	-	-
Cl-6.3, Annex N (i)(P,P- DDD)	-	-	-
Cl-6.3, Annex N (i)(O,P-DDD)	-	-	-
Cl- 6.3, Annex N (ii)(γ-HCH (lindane))	-	-	-
Cl- 6.3, Annex N (iii)(α-HCH)	-	-	-
Cl- 6.3, Annex N (iii)(β-HCH)	-	-	-
Cl- 6.3, Annex N (iii)(δ - HCH)	-	-	-
Cl- 6.3, Annex N (iv)(Endosulfan - α)	-	-	-
Cl- 6.3, Annex N (iv)(Endosulfan - β)	-	-	-
Cl- 6.3, Annex N (iv)(Endosulfan - sulphate)	-	-	-
Cl- 6.3, Annex N (v)(Monocrotophos)	-	-	-
Cl- 6.3, Annex N (viii)(Phorate and its oxygen analogue)	-	-	-
Cl- 6.3, Annex N (viii)(phorate sulphoxide)	-	-	-
Cl- 6.3, Annex N (viii)(phorate sulphone)	-	-	-
Cl- 6.3, Annex N (ix)(2,4-D)	-	-	-
Cl- 6.3, Annex N (x)(Butachlor)	-	-	-
Cl- 6.3, Annex N (xi)(Isoproturon)	-	-	-
Cl- 6.3, Annex N (xii)(Alachlor)	-	-	-
Cl- 6.3, Annex N (xiii)(Atrazine)	-	-	-
Cl- 6.3, Annex N (xiv)(Methyl parathion)	-	-	-
Cl- 6.3, Annex N (xiv)(Methyl paraoxon)	-	-	-
Cl- 6.3, Annex N (xv)(Malathion)	-	-	-
Cl- 6.3, Annex N (xv)(malaoxon)	-	-	-
Cl- 6.3, Annex N (xvi)(Aldrin)	-	-	-
6.2/Table 3/x(Uranium)	-	-	-
Cl- 6.3, Annex N (i)(P,P- DDT)	-	-	-
Cl- 6.3, Annex N (vi)(Ethion)	-	-	-
Cl- 6.3, Annex N (vii)(Chlorpyrifos)	-	-	-
Cl-6.1.3(Staphylococcus aureus)	-	-	-
Cl-6.1.7(Shigella)	-	-	-
Cl-6.1.8(V. parahaemolyticus)	-	-	-
Cl-6.3, Annex N (XVI)(Dieldrin)	-	-	-

17 Jun, 2027

-
Included w.e.f 20.12.2024 Exclusion : Cl 6.2 Table 4(i) Alpha emitters Cl 6.2 Table 4(ii) Beta emitters

7888

DELHI TEST HOUSE (50) KUNDLI SONIPAT

9127026

IS 3315 (2019)

Evaporative air coolers (Desert Coolers?) - Specification (Third Revision)

70000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
15.3(BIS Certification Marking)	-	1000	-
15( MARKING AND INFORMATION)	-	750	-
10.5( Stable Operating Conditions)	-	2000	-
10.2(Standard Ratings)	-	1500	-
10(GENERAL TEST CONDITIONS)	-	2000	-
9.5( Energy Consumption)	-	1500	-
9.3(Noise Level)	-	2000	-
9(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	1200	-
8.3.1 ,8.4.2, & 6.2(Cooling Efficiency and Air Delivery Test)	-	15000	-
8.2.8, 8.4.3,& 6.2©(Power Consumption Test)	-	8800	-
8.2.7( Finish )	-	750	-
8.2.6( Earthing Connections Tests)	-	3000	-
8.2.5( Leakage Current)	-	4000	-
8.2.4(Insulation Resistance Test)	-	4500	-
8.2.3 (High Voltage Tests)	-	5000	-
8.2.2(Protection against Electric Shock )	-	3000	-
6(PERFORMANCE REQUIREMENTS)	-	3500	-
15.3(BIS Certification Marking)	-	1000	-
15( MARKING AND INFORMATION)	-	750	-
10.5( Stable Operating Conditions)	-	2000	-
10.2(Standard Ratings)	-	1500	-
10(GENERAL TEST CONDITIONS)	-	2000	-
9.5( Energy Consumption)	-	1500	-
9.3(Noise Level)	-	2000	-
9(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	1200	-
8.3.1 ,8.4.2, & 6.2(Cooling Efficiency and Air Delivery Test)	-	15000	-
8.2.8, 8.4.3,& 6.2©(Power Consumption Test)	-	8800	-
8.2.7( Finish )	-	750	-
8.2.6( Earthing Connections Tests)	-	3000	-
8.2.5( Leakage Current)	-	4000	-
8.2.4(Insulation Resistance Test)	-	4500	-
8.2.3 (High Voltage Tests)	-	5000	-
8.2.2(Protection against Electric Shock )	-	3000	-
6(PERFORMANCE REQUIREMENTS)	-	3500	-
5(Manufacture and construction)	-	2500	-
7(Electrical equipment)	-	4000	-
8.2.1(General running tests)	-	500	-
8.3.2(Rated frequency)	-	1500	-
8.4.1 a)(Verification of marking)	-	2000	-

23 Jun, 2028

-
Included w.e.f. 03.05.2024

7889

DELHI TEST HOUSE, Azadhpur

8131406

IS 14246 (2024)

CONTINUOUSLY PRE-PAINTED GALVANIZED STEEL SHEETS AND STRIPS - SPECIFICATION Second Revision

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Steel Base)	-	2500	Class 1- 23000, Class 2 - 28000, Class 3 - 55000
Cl-4.2(Metallic Coating)	-	1000	Class 1- 23000, Class 2 - 28000, Class 3 - 55000
Cl-4.3(Organic Coating)	-	1000	Class 1- 23000, Class 2 - 28000, Class 3 - 55000
Cl-4.4(Dry Film Thickness)	-	500	Class 1- 23000, Class 2 - 28000, Class 3 - 55000
Cl-5(Classification of durability of organic coating)	-	2000	Class 1- 23000, Class 2 - 28000, Class 3 - 55000
Cl-6.2.3(Bend Test)	-	500	Class 1- 23000, Class 2 - 28000, Class 3 - 55000
Cl-6.3.1(Pencil Hardness Test)	-	500	Class 1- 23000, Class 2 - 28000, Class 3 - 55000
Cl-6.4(Impact Resistance Test)	-	1000	Class 1- 23000, Class 2 - 28000, Class 3 - 55000
Cl-6.5(Cross Hatch Test)	-	1000	Class 1- 23000, Class 2 - 28000, Class 3 - 55000
Cl-7.3.1(Gloss)	-	1000	Class 1- 23000, Class 2 - 28000, Class 3 - 55000
Cl-7.3.2(Colour)	-	500	Class 1- 23000, Class 2 - 28000, Class 3 - 55000
Cl-9.1(The nominal thickness of sheets)	-	500	Class 1- 23000, Class 2 - 28000, Class 3 - 55000
Cl-9.4.1(Tolerances on thickness sheets and strips)	-	500	Class 1- 23000, Class 2 - 28000, Class 3 - 55000
Cl-9.4.2(Width)	-	500	Class 1- 23000, Class 2 - 28000, Class 3 - 55000
Cl-9.4.3(Length)	-	500	Class 1- 23000, Class 2 - 28000, Class 3 - 55000
Cl-10.1(Camber)	-	500	Class 1- 23000, Class 2 - 28000, Class 3 - 55000
Cl-10.2(Deviation from Squareness (Out-of Square)	-	500	Class 1- 23000, Class 2 - 28000, Class 3 - 55000
Cl-10.3(Deviation from Flatness)	-	500	Class 1- 23000, Class 2 - 28000, Class 3 - 55000
Cl-6.7(Other Tests)	-	0	Class 1- 23000, Class 2 - 28000, Class 3 - 55000
Cl-8.1, Table-4 (i)(Undercut at scribed lines)	-	40000	Class 1- 23000, Class 2 - 28000, Class 3 - 55000
Cl-8.1, Table-4 (ii)(Corrosion of the base metal)	-	40000	Class 1- 23000, Class 2 - 28000, Class 3 - 55000
Cl-8.1, Table-4 (iii)(Blistering)	-	40000	Class 1- 23000, Class 2 - 28000, Class 3 - 55000
Cl-8.2 Table 5 (i)(Undercut at scribed lines)	-	40000	Class 1- 23000, Class 2 - 28000, Class 3 - 55000
Cl-8.2 Table 5 (ii)(Blistering)	-	40000	Class 1- 23000, Class 2 - 28000, Class 3 - 55000
Cl-6.6(Solvent Resistance Test)	-	750	Class 1- 23000, Class 2 - 28000, Class 3 - 55000
Cl-9.4.4(Mass)	-	500	Class 1- 23000, Class 2 - 28000, Class 3 - 55000
Cl-4.5(Profiles)	-	0	Class 1- 23000, Class 2 - 28000, Class 3 - 55000
Cl-6.1(Sampling of Test Specimen)	-	0	Class 1- 23000, Class 2 - 28000, Class 3 - 55000

17 Jun, 2027

-
Included w.e.f 16.05.2024

7890

DELHI TEST HOUSE, Azadhpur

8131406

IS 13395 (2021)

Performance of Handles and Handle Assemblies Attached to Cookware - Specification ( First Revision )

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Construction)	-	250	NA
4.2(Materials)	-	2500	NA
4.3(Selection and Size)	-	250	NA
4.4(Position of handle and knob with respect to cookware)	-	250	NA
4.5(Attachment to cookware)	-	250	NA
5.1(General)	-	500	NA
5.2(Bending strength)	-	1500	NA
5.3(Torque strength)	-	1500	NA
5.4(Impact strength)	-	1000	NA
5.5(Fatigue resistance)	-	1000	NA
5.6(Leakage)	-	2000	NA
5.7(Thermal insulation)	-	1000	NA
5.8(Heat resistance)	-	1500	NA
5.9(Washing resistance)	-	1000	NA
5.10(Burning resistance)	-	1500	NA

17 Jun, 2027

-
Revised version of IS 13395:2021 included w.e.f. 28-7-2021.

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number