BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15471 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

7891

Shriram Research Institute

6104206

IS 21 (1992)

Wrought aluminium and aluminium alloys for manufacture of utensils specification (Fourth Revision)

All Grades

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	750	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Tensile Strength)	-	750	-

-
-

7892

Shriram Research Institute

6104206

IS 13457 (1992)

Pesticide - Deltamethrin WP specification

All Grades

6100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Description)	-	100	-
Cl. 3.3&3.3.1 Table 1(Deltamethrin content, )	-	2000	-
Cl. 3.3 Table 1(Sieving (material passing through 45 Micron IS Sieve),)	-	500	-
Cl. 3.3 Table 1(Suspensibility, )	-	2000	-
Cl. 3.3 Table 1(Wettability )	-	250	-
Cl. 3.3 Table 1(Acidity (as H2SO4), or Alkalinity (as NaOH))	-	1250	-

-
-

7893

Shriram Research Institute

6104206

IS 2557 (1994)

Annatto colour for food products - Specification (First Revision)

All Grades

5280 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table-1 Clause-5.1 SI.no (i) Annex-B(a) Annatto extract in oil, expresaed as bixin, percent by mass , min )	-	1000	-
Table-1 Clause-5.1 SI.no (ii) IS-1699 CL-15(Arsenic mg/kg)	-	1000	-
Table-1 Clause-5.1 SI.no (iii) IS-1699 CL-15(Lead mg/kg )	-	1000	-
Table-1 Clause-5.1 SI.no (ii) IS-1699 CL-15(Copper mg/kg)	-	1000	-
Table-1 Clause-5.1 SI.no (iii) IS-1699 CL-18(Heavy Metals mg/kg)	-	480	-

-
-

7894

Shriram Research Institute

6104206

IS 5346 (1994)

Synthetic food colour - Preparations and mixtures - Specification (Second Revision)

All Grades

4100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.5(Total dye Content)	-	1500	-
Clause 4.6 Table 1(Water InsoIuble matter,)	-	1000	-
Clause 4.6 Table 1(Lead (as pb) )	-	500	-
Clause 4.6 Table 1(Arsenic(as As))	-	500	-
Clause 4.6 Table 1(Heavy metals)	-	500	-
4.6 - Table 1 - Sl No - iv(Heavy metals - Cl 16 of IS 1699)	-	500	-
4.6 - Table 1 - Sl No - iii(Arsenic(as As) - Cl 15 of IS 1699)	-	500	-
4.6 - Table 1 - Sl No - ii(Lead (as pb) - Cl 15 of IS 1699)	-	500	-
4.6 - Table 1 - Sl No - i(Water InsoIuble matter - Cl 4 of IS 1699)	-	1000	-
4.5(Total dye Content, Annex - B)	-	1500	-

-
-

7895

Shriram Research Institute

6104206

IS 6527 (1995)

Stainless steel wire rods - Specification (First Revision)

All Grades

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 9(Tensile & Hardness)	-	2000	-
Cl 9(Tensile & Hardness)	-	1000	-
Cl 10(Diameter & Out Of Round)	-	1000	-

-
-

7896

Shriram Research Institute

6104206

IS 9359 (2023)

PHORATE G ENCAPSULATED SPECIFICATION Second Revision

GRANULES

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2.2(Physical - Sieving Requiremenr)	-	500	Visual
3.2.3(Dust)	-	1000	Sieve analysis and titrimetric
3.2.4.1(Encapsulation- % of declared nominal active ingredient in remnants.)	-	1500	Titrimetric
3.2.5(Moisture Content)	-	500	By Kar Fischer method
3.3.1(Phorate Content)	-	2000	Titrimetric
3.3.2(Acidity)	-	500	Titrimetric
3.2.2(Sieving Requirement)	-	500	GRavimeric analysis
3.2.3(Dust)	-	1000	Gravimetic
3.2.4(Encapsulation)	-	1500	Gravimetric and titrimetry
3.2.5(Moisture Content)	-	500	Karl Fischer Method
3.3.1(Phorate Content)	-	2000	Titrimetric
3.3.2(Acidity)	-	500	Titrimetry

-
-

7897

Shriram Research Institute

6104206

IS 1011 (2002)

Biscuits - Specification (Fourth Revision)

All Grades

3280 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(General Requirement)	-	530	-
6.3 Table 2 i (Moisture)	-	800	-
6.3 Table 2 ii (Acid insoluble ash (on dry basis))	-	950	-
6.3 Table 2 iii (Acidity of extracted fat (as oleic acid))	-	1000	-

-
-

7898

Shriram Research Institute

6104206

IS 2645 (2003)

Integral waterproofing compounds for cement mortar and concrete - Specification (Second Revision)

All Grades

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 3.2(Initial & Final)	-	1000	-
Cl 3.1(The permeability of water in specimen Prepared with WPC shall be less than half the permeability of plain cement specimens. (i.e ; < 50 percent))	-	3000	-
Cl 3.3(Compressive Strength, At 3days & 7 days)	-	3000	-

-
-

7899

Shriram Research Institute

6104206

IS 3633 (2003)

Black tea - Specification (Second Revision)

6200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.4 i(Water extract)	-	300	AS PER IS 3633.
4.4 ii(Total ash)	-	300	AS PER IS 3633.
4.4 iii(Water-soluble ash of total ash)	-	300	AS PER IS 3633.
4.4 iv(Alkalinity of water-solubleash (as K₂0))	-	300	AS PER IS 3633.
4.4 v(Acid-insoluble ash)	-	300	AS PER IS 3633.
4.4 vi(Crude fibre)	-	500	AS PER IS 3633.
4.4 i(Lead)	-	500	AS PER IS 3633.
4.4 iii(Copper)	-	500	AS PER IS 3633
4.1(Description)	-	200	AS PER IS 3633
4.3(Iron Fillings)	-	200	AS PER IS 3633
4.4 i(Dicofol)	-	1000	AS PER IS 3633
4.4 ii(Ethion)	-	1000	AS PER IS 3633
4.4 iii(Quinolphos)	-	1000	AS PER IS 3633

-
-

7900

Shriram Research Institute

6104206

IS 8944 (2005)

Chlorpyrifos, emulsifiable concentrates - Specification (First Revision)

All Grades

5850 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2.1(Description)	-	100	-
3.2.2(Cold Test)	-	250	-
3.2.3(Flash Point (Abel))	-	1000	-
3.2.4(Emulsion Stability)	-	250	-
3.3.1(Chloropyrifos content)	-	3000	-
3.3.2(Acidity (as H2SO4), )	-	1250	-

-
-

7901

Shriram Research Institute

6104206

IS 7224 (2006)

Iodized salt, vacuum evaporated iodized salt and refined iodized salt - Specification (Second Revision)

All Grades

7440 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.2(Particle Size)	-	100	-
Clause 4.3 Table 1(Moisture content)	-	400	-
Clause 4.3 Table 1(water insoluble matter)	-	240	-
Clause 4.3 Table 1(Chloride Content(as Nacl))	-	400	-
Clause 4.3 Table 1(Matter soluble in water other than sodium chloride)	-	400	-
Clause 4.3 Table 1(Calcium (as Ca))	-	400	-
Clause 4.3 Table 1(Magnesium (as mg))	-	400	-
Clause 4.3 Table 1(Sulphate (as SO4 ),)	-	400	-
Clause 4.3 Table 1(Iodine content, a) Manufacturers Level )	-	400	-
Clause 4.3 Table 1(b) Distribution channel including retailer)	-	400	-
Clause 4.3 Table 1(Alkalinity (as Na2CO3),)	-	400	-
Clause 4.3 Table 1(Lead as (Pb))	-	1200	-
Clause 4.3 Table 1(Arsenic(as As))	-	1200	-
Clause 4.3 Table 1(Iron(as Fe))	-	1200	-

-
-

7902

Shriram Research Institute

6104206

IS 8708 (2006)

Mancozeb wettable powder - Specification (First Revision)

All Grades

5850 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2.1(Description)	-	100	-
3.2.2(Sieving Requirement)	-	500	-
3.2.3(Suspensibility)	-	1500	-
3.2.4(Wettability)	-	250	-
3.3.2(Zinc Content)	-	750	-
3.3.3(Manganese Content)	-	750	-
3.3.1(Mancozeb Content)	-	0	-

-
-

7903

Shriram Research Institute

6104206

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

All Grades

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1(Nominal Size)	-	500	-
Cl. 7.2 Table -2 (Nominal Mass)	-	500	-
Cl. 8.1 Table 3(Tensile Strength (TS))	-	2000	-
Cl. 9.3, Table 4(Bend Test )	-	2000	-
Cl.9.4 & Cl. 9.4.1(Rebend test)	-	2000	-
Cl 5(Deformations and Surface Characteristics)	-	3000	-
4.1(Carbon %)	-	5000	-
4.1(Sulphur %)	-	0	-
4.1(Phosphorus %)	-	0	-
4.1(Manganese %)	-	0	-
4.1( Nitrogen%)	-	0	-
4.1(Ni)	-	0	-
4.1(Cr)	-	0	-
4.1(Mo)	-	0	-
4.1(Silicon %)	-	0	-
4.1( Copper %)	-	0	-
4.1( Nb)	-	0	-
4.1( Ti)	-	0	-
4.1( Aluminium %)	-	0	-
4.1(V)	-	0	-

-
-

7904

Shriram Research Institute

6104206

IS 252 (2013)

Caustic soda - Specification (Fourth Revision)

All Grades

7600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Form and Description)	-	100	-
Cl. 3.3 and 3.4(Table 1, S. no ii)(Sodium hydroxide (as NaOH), percent by mass)	-	1000	-
Cl. 3.3 and 3.4(Table 1, S. no i)(Sodium carbonate (as Na2CO3), percent by mass)	-	1000	-
Cl. 3.3 and 3.4(Table 1, S. no iii)(Chlorides (as Cl– ), percent by mass)	-	1000	-
Cl. 3.3 and 3.4(Table 1, S. no iv)(Sulphates (as SO4), percent by mass)	-	500	-
Cl. 3.3 and 3.4(Table 1, S. no v)(Silicates (as SiO2), percent by mass)	-	500	-
Cl. 3.3 and 3.4(Table 1, S. no vi)(Iron (as Fe))	-	500	-
Cl. 3.3 and 3.4(Table 1, S. no vii)(Copper)	-	500	-
Cl. 3.3 and 3.4(Table 1, S. no viii)(Manganese)	-	500	-
Cl. 3.3 and 3.4(Table 1, S. no ix)(Chlorates and per-chlorates)	-	1000	-
Cl. 3.3 and 3.4(Table 1, S. no xi)(Total mercury)	-	1000	-

-
-

7905

Shriram Research Institute

6104206

IS 3812 (Part 1) (2013)

Pulverized fuel ash - Specification: Part 1 For use as pozzolana in cement, cement mortar and concrete

All Grades

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1-Table 2(i)(PHYSICAL REQUIREMENTS-Fineness)	-	1000	-
7.1-Table 2(ii)(PHYSICAL REQUIREMENTS-Particles retained on 45 micron IS sieve)	-	1000	-
7.1-Table 2(iii)(PHYSICAL REQUIREMENTS-Average compressive strength)	-	2000	-
7.1-Table 2(iv)(PHYSICAL REQUIREMENTS-Compressive strength at 28 days)	-	3000	-
7.1-Table 2(v)(PHYSICAL REQUIREMENTS-Soundness by autoclave test )	-	2000	-
Cl. 6.1, Table 1 - i(Silicon dioxide (SiO2) plus aluminium oxide (Al2O3) plus ironoxide (Fe2O3) - IS 1727)	-	5500	-
Cl. 6.1, Table 1 - ii(Silicon dioxide (SiO2) - IS 1727)	-	0	-
Cl. 6.1, Table 1 - iii(Reactive Silica - Annex B)	-	0	-
Cl. 6.1, Table 1 - iv(Magnesium oxide (MgO) - IS 1727)	-	0	-
Cl. 6.1, Table 1 - v( Total sulphur as sulphur trioxide (SO3) - IS 1727)	-	0	-
Cl. 6.1, Table 1 - vi( Available alkalis as equivalent sodium oxide (Na2O) - Annex C)	-	0	-
Cl. 6.1, Table 1 - vii( Total Chlorides - IS 4032)	-	0	-
Cl. 6.1, Table 1 - viii( Loss on ignition - IS 1727)	-	0	-
Cl. 6.2(Moisture content of the fly ash when supplied in dry condition - Annex D)	-	0	-

-
-

7906

Shriram Research Institute

6104206

IS 3812 : Part 2 (2013)

Pulverized Fuel Ash - Part 2 : For Use as Admixture in Cement Mortar and Concrete

All Grades

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1, Table 1(Fineness — Specific surface in m2 /kg)	-	1000	-
7.1, Table 1(Particles retained on 45 micron IS sieve (wet sieving))	-	1000	-
7.1, Table 1(Soundnes)	-	2000	-
5.1, 6.1, Table 1(Silicon dioxide (SiO2 ) plus aluminium oxide (Al2O3 ) plus iron oxide (Fe2O3 ))	-	5500	-
5.1, 6.1, Table 1(Silicon dioxide (SiO2 ))	-	0	-
5.1, 6.1, Table 1(Magnesium oxide (MgO)	-	0	-
5.1, 6.1, Table 1(Total sulphur as sulphur trioxide (SO3)	-	0	-
5.1, 6.1, Table 1(Available alkalies as equivalent sodium oxide (Na2O))	-	0	-
5.1, 6.1, Table 1(Total chlorides)	-	0	-
5.1, 6.1, Table 1(Loss on ignition)	-	0	-
6.2(moisture content)	-	0	-

-
-

7907

Shriram Research Institute

6104206

IS 5410 (2013)

Cement paint - Specification (Second Revision)

11500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4.1(Composition - Portland Cement)	-	3500	-
Cl.4.1(Composition - Hydrated Lime)	-	0	-
Cl.4.1.1(Freedom from Organic Binders)	-	100	-
Cl.4.4(Lead Restriction)	-	1000	-
Cl.4.8, 7.1 - Table 1 iv)(Fastness to light)	-	5000	-
Cl.4.6(Durability)	-	0	-
Cl.4.7(Keeping Properties)	-	0	-
Cl.4.8, 7.1 - Table 1 i)(Drying Time, Hard Dry)	-	100	-
Cl.4.8, 7.1 - Table 1 iii)(Colour)	-	100	-
Cl.4.8, 7.1 - Table 1 v)(Residue on sieve (on dry material))	-	200	-
Cl.4.8, 7.1 - Table 1 vii)(Water Repellency)	-	200	-
Cl.4.8, 7.1 - Table 1 viii)(Pot life of mixed paint)	-	200	-
Cl.4.8, 7.1 - Table 1 ix)(Recoating Properties)	-	200	-

-
-

7908

Shriram Research Institute

6104206

IS 253 (2014)

Specification for common salt (Fourth Revision)

All Grades

6690 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause -3 for common salt 3.1 ( 3.1.1 ) ( The material shall be crystalline solid, white or pale pink or light grey in colour.)	-	200	-
Clause -3 for common salt 3.1 ( 3.1.2 ) Annex-2(Moisture The material shall contain not more than 6.0 percent by mass of moisture, on as received basis, when tested according to the method given in A-2)	-	500	-
Clause-3.2 for dairy salt (3.2.1)(The material shall be crystalline white solid and free from any visible impurities.)	-	200	-
Clause-3.1 for dairy salt (3.2.2)(3.2.2 Particle Size 99 percent by mass of the material shall pass completely through 850-micron IS Sieve [see IS 460 (Part I)].)	-	300	-
Clause-3.2 for dairy salt (3.2.3) Annex -2(3.2.3 Moisture The material shall contain not more than 0.5 percent by mass of moisture, on as received basis, when tested according to the methods given in A-2.)	-	500	-
Table 1 (i) Annex -4(Water insoluble matter, common)	-	250	-
Table 1 (i) Annex -4(Water insoluble matter, Dairy)	-	250	-
Table 1 (ii) Annex-5(Chloride content (as NaCl)common)	-	350	-
Table 1 (ii) Annex-5(Chloride content (as NaCl), Dairy)	-	350	-
Table 1 (iii) Annex-6( Matter soluble in water, other than sodium chloride, common)	-	300	-
Table 1 (iii) Annex-6( Matter soluble in water, other than sodium chloride, Dairy)	-	300	-
Table 1 (iv)(Calcium (as Ca), water soluble, percent by mass, common)	-	700	-
Table 1 (iv) Annex-7(Calcium (as Ca), water soluble, percent by mass, Dairy)	-	700	-
Table 1 (v)(Magnesium (as Mg), water soluble, percent by mass, common )	-	700	-
Table 1 (v) Annex-7(Magnesium (as Mg), water soluble, percent by mass, Dairy )	-	700	-
Table 1 (vi)(Sulphate as SO2 percent by mass, common)	-	390	-
Table 1 (vi) Annex-8(sulphate as SO2 percent by mass, Dairy)	-	390	-
Table 1 (vii) Annex-9(Alkalinity (as Na2CO3), common)	-	200	-
Table 1 (vii) Annex-11(Alkalinity (as Na2CO3), Dairy)	-	200	-
Table 1 (viii)(Lead (as Pb), common)	-	700	-
Table 1 (viii)(Lead (as Pb),Dairy )	-	700	-
Table 1 (ix)(Iron (as Fe), common)	-	700	-
Table 1 (ix)(Iron (as Fe), Dairy)	-	700	-
Table 1 (x) Annex-11(x) Arsenic (as As), common)	-	700	-
Table 1 (x) Annex-11(x) Arsenic (as As),Dairy)	-	700	-
Table 1 (xi) Annex-12(Copper (as Cu), common)	-	700	-
Table 1 (xi) Annex-12(Copper (as Cu), Dairy )	-	700	-

-
-

7909

Shriram Research Institute

6104206

IS 269 (2015)

Ordinary portland cement - Specification (Sixth Revision)

All Grades

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 Table-3 i.(Fineness)	-	1000	-
7 Table-3 ii a(Expansion by Le Chatelier)	-	500	-
7 Table-3 ii b(Expansion by Autoclave)	-	500	-
7 Table-3 iii a(Setting Time Initial)	-	500	-
7 Table-3 iii b(Setting Time Final)	-	500	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1000	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1000	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1000	-

-
-

7910

Shriram Research Institute

6104206

IS 455 (2015)

Portland slag cement - Specification

All Grades

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 Table 1 i(Fineness IS 4031(Part 2))	-	1000	-
7 Table 1 ii a(Soundness, Le-Chate1ier expansion IS 4031(Part 3) )	-	500	-
7 Table 1 ii b(Soundness, Autoclave expansion IS 4031(Part 3) )	-	500	-
7 Table 1 iii a(Setting Time ( by Vicat Apparatus ),Initial IS 4031(Part 5))	-	500	-
7 Table 1 iii b(Setting Time ( by Vicat Apparatus ), Final IS 4031(Part 5))	-	500	-
7 Table 1 iv a(Compretsive Strenqth .72 ± 1 hr IS 4031(Part 6))	-	1000	-
7 Table 1 iv b(Compretsive Strenqth 168 ± 2 hr IS 4031(Part 6))	-	1000	-
7 Table 1 iv c(Compretsive Strenqth 672 ± 4 hr IS 4031(Part 6))	-	1000	-

-
-

7911

Shriram Research Institute

6104206

IS 1489 (Part 1) (2015)

Portland pozzolana cement - Specification: Part 1 fly Ash Based

All Grades

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 -Table 2- i(Fineness 4031 Part 2)	-	1000	-
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	500	-
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	500	-
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	500	-
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	500	-
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1000	-
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1000	-
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1000	-
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	1000	-

-
-

7912

Shriram Research Institute

6104206

IS 1489 : Part 2 (2015)

Portland - Pozzolana cement - Specification: Part 2 calcined clay based

All Grades

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 -Table 2- i(Fineness 4031 Part 2)	-	1000	-
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	500	-
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	500	-
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	500	-
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	500	-
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1000	-
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1000	-
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1000	-
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	1000	-

-
-

7913

Shriram Research Institute

6104206

IS 8042 (2015)

White portland cement - Specification (Third Revision)

All Grades

13500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 -Table 2- i(Fineness 4031 Part 2)	-	1000	-
6 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	1000	-
6 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	1000	-
6 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	500	-
6 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	500	-
6 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1000	-
6 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1000	-
6 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	2000	-
6 -Table 2- vi(Degree of whiteness-Annex B)	-	0	-

-
-

7914

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

Plywood for General Purposes-Specification

28000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Classification by appearance)	-	500	-
Cl-5.2, Table- 1 (i)(Blister)	-	0	-
Cl-5.2, Table- 1 (ii)(Checks)	-	0	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	0	-
Cl-5.2, Table- 1 (iv)(Dote)	-	0	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	0	-
Cl-5.2, Table- 1 (vi)(Joints)	-	0	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	0	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	0	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	0	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	0	-
Cl-5.2, Table- 1 (xi)(Patches)	-	0	-
Cl-5.2, Table- 1 (xii)(Splits)	-	0	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	0	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	0	-
Cl-6.1(Timber)	-	0	-
Cl-6.2(Adhesive)	-	2700	-
Cl-7.2.1(Thickness of veneers)	-	100	-
Cl-7.2.3(Grain Direction)	-	100	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	100	-
Cl-7.2.5.2(Splits)	-	100	-
Cl-7.2.5.3(Overlap)	-	100	-
Cl-8.1(Dimensions -length)	-	700	-
Cl-8.2(Thickness of the plywood boards)	-	700	-
Cl-8.3(Squareness)	-	600	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	5500	-
Cl-11.3.2(Mycological Test)	-	10000	-
Cl-11.4(Moisture Content)	-	1800	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	3000	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	3000	-
Cl-11.6(Formaldehyde Content Test)	-	2000	-
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	0	-
Cl-5.1(Classification by appearance)	-	0	-
Cl-5.2, Table- 1 (i)(Blister)	-	0	-
Cl-5.2, Table- 1 (ii)(Checks)	-	0	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	0	-
Cl-5.2, Table- 1 (iv)(Dote)	-	0	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	0	-
Cl-5.2, Table- 1 (vi)(Joints)	-	0	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	0	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	0	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	0	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	0	-
Cl-5.2, Table- 1 (xi)(Patches)	-	0	-
Cl-5.2, Table- 1 (xii)(Splits)	-	0	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	0	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	0	-
Cl-6.1(Timber)	-	0	-
Cl-6.2(Adhesive)	-	0	-
Cl-7.2.1(Thickness of veneers)	-	0	-
Cl-7.2.3(Grain Direction)	-	0	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	0	-
Cl-7.2.5.2(Splits)	-	0	-
Cl-7.2.5.3(Overlap)	-	0	-
Cl-8.1(Dimensions -length)	-	0	-
Cl-8.2(Thickness of the plywood boards)	-	0	-
Cl-8.3(Squareness)	-	0	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	0	-
Cl-11.3.2(Mycological Test)	-	0	-
Cl-11.4(Moisture Content)	-	0	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	0	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	0	-
Cl-11.6(Formaldehyde Content Test)	-	0	-
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	0	-
Cl-9(WORKMANSHIP AND FINISH)	-	0	-
Cl-7.2.4(Scarf Joints)	-	500	-
Cl-5.1(Classification by appearance)	-	0	-
Cl-5.2, Table- 1 (i)(Blister)	-	0	-
Cl-5.2, Table- 1 (ii)(Checks)	-	0	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	0	-
Cl-5.2, Table- 1 (iv)(Dote)	-	0	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	0	-
Cl-5.2, Table- 1 (vi)(Joints)	-	0	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	0	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	0	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	0	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	0	-
Cl-5.2, Table- 1 (xi)(Patches)	-	0	-
Cl-5.2, Table- 1 (xii)(Splits)	-	0	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	0	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	0	-
Cl-6.1(Timber)	-	0	-
Cl-6.2(Adhesive)	-	0	-
Cl-7.2.1(Thickness of veneers)	-	0	-
Cl-7.2.3(Grain Direction)	-	0	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	0	-
Cl-7.2.5.2(Splits)	-	0	-
Cl-7.2.5.3(Overlap)	-	0	-
Cl-8.1(Dimensions -length)	-	0	-
Cl-8.2(Thickness of the plywood boards)	-	0	-
Cl-8.3(Squareness)	-	0	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	0	-
Cl-11.3.2(Mycological Test)	-	0	-
Cl-11.4(Moisture Content)	-	0	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	0	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	0	-
Cl-11.6(Formaldehyde Content Test)	-	0	-
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	0	-
Cl-9(WORKMANSHIP AND FINISH)	-	0	-
Cl-7.2.4(Scarf Joints)	-	0	-
Cl-5.1(Classification by appearance)	-	0	-
Cl-5.2, Table- 1 (i)(Blister)	-	0	-
Cl-5.2, Table- 1 (ii)(Checks)	-	0	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	0	-
Cl-5.2, Table- 1 (iv)(Dote)	-	0	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	0	-
Cl-5.2, Table- 1 (vi)(Joints)	-	0	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	0	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	0	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	0	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	0	-
Cl-5.2, Table- 1 (xi)(Patches)	-	0	-
Cl-5.2, Table- 1 (xii)(Splits)	-	0	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	0	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	0	-
Cl-6.1(Timber)	-	0	-
Cl-6.2(Adhesive)	-	0	-
Cl-7.2.1(Thickness of veneers)	-	0	-
Cl-7.2.3(Grain Direction)	-	0	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	0	-
Cl-7.2.5.2(Splits)	-	0	-
Cl-7.2.5.3(Overlap)	-	0	-
Cl-8.1(Dimensions -length)	-	0	-
Cl-8.2(Thickness of the plywood boards)	-	0	-
Cl-8.3(Squareness)	-	0	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	0	-
Cl-11.3.2(Mycological Test)	-	0	-
Cl-11.4(Moisture Content)	-	0	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	0	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	0	-
Cl-11.6(Formaldehyde Content Test)	-	0	-
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	0	-
Cl-9(WORKMANSHIP AND FINISH)	-	0	-
Cl-7.2.4(Scarf Joints)	-	0	-

-
Included w.e.f.19.05.2025

7915

BIS, Eastern Regional Laboratory (ERL)

None

IS 15298 : part 4 (2024)

Personal Protective Equipment Part 4 Occupational Footwear (ISO 20347 : 2021, MOD) (Third Revision)

For all class, design and size

20400 View breakup
Chemical Requirement, Cl.5.3.5, Lead Content, Cl.5.3.7

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5.2 (Design)	-
Cl 5.2.2 (" Height of upper ")	-
Cl 5.2.3 (Heel area)	-
Cl 5.3.1.1 (Construction of whole footwear)	-
Cl 5.3.1.2 (Upper/outsole bond strength)	-
Cl 5.3.2 (Leak proofness)	-
Cl 5.3.3 (Specific ergonomic features)	-
Cl 5.3.6 (Seam strength)	-
Cl 5.4.1.1 (Class I footwear, determination of the area where upper requirements apply of Upper)	-
Cl 5.4.1.2 (Hybrid footwear, determination of the area where upper requirements apply of Upper)	-
Cl 5.4.2 (Thickness)	-
Cl 5.4.3 (Tear strength)	-
Cl 5.4.4, Table 9 (Tensile properties- Tensile strength)	-
Cl 5.4.4, Table 9 (Tensile properties- Breaking Force)	-
Cl 5.4.4, Table 9 (Tensile properties-Modulus at 100 % elongation)	-
Cl 5.4.4, Table 9 (Tensile properties- Elongation at break)	-
Cl 5.4.5 (Flexing resistance)	-
Cl 5.4.6 (Water vapour permeability and coefficient)	-
Cl 5.4.7 (Resistance to hydrolysis)	-
Cl 5.5.2 (Lining- Tear strength)	-
Cl 5.5.3 (Lining- Abrasion resistance)	-
Cl 5.5.4 (Lining-Water vapour permeability and coefficient)	-
Cl 5.6.2 (Tear strength of tongue)	-
Cl 5.7.1 (Thickness of Insole, insock and footbed)	-
Cl 5.7.2 (Water permeability of insock)	-
Cl 5.7.3 (Water absorption and desorption of Insole, insock and footbed)	-
Cl 5.7.4.1 (Abrasion resistance of Insoles)	-
Cl 5.7.4.2 (Abrasion resistance of Insocks)	-
Cl 5.8.2.1 (Thickness of Outsole)	-
Cl 5.8.2.2 (Cleated area)	-
Cl 5.8.2.3 (Cleat height)	-
Cl 5.8.3 (Outsole- Tear strength)	-
Cl 5.8.4 (Outsole- Abrasion resistance)	-
Cl 5.8.5 (Outsole-Flexing resistance)	-
Cl 5.8.6 (Outsole-Resistance to hydrolysis)	-
Cl 5.8.7 (Interlayer bond strength)	-
Cl.1.4.1 of IS 17011 (Table B Sl I ) (Phthalate: DINP)	-
Cl.1.4.1 of IS 17011 (Table B Sl II ) (Phthalate:: DNOP)	-
Cl.1.4.1 of IS 17011 (Table B Sl III ) (Phthalate: DEHP)	-
Cl.1.4.1 of IS 17011 (Table B Sl IV ) (Phthalate: DIDP)	-
Cl.1.4.1 of IS 17011 (Table B Sl V) (Phthalate: BBP)	-
Cl.1.4.1 of IS 17011 (Table B Sl VI ) (Phthalate:DBP)	-
Cl.1.4.1 of IS 17011 (Table B Sl VII ) (Phthalate: DIBP)	-
Cl.4.1 (Annex-A Sl I ) (Organotin: Dibutyltin)	-
Cl.4.1 (Annex-A Sl II ) (Organotin: Dibutyltin Dichloride)	-
Cl.4.1 (Annex-A Sl III ) (Organotin: Dioctyltin)	-
Cl.4.1 (Annex-A Sl IV) (Organotin: Monobutyltin)	-
Cl.4.1 (Annex-A Sl V ) (Organotin: Tributyltin)	-
Cl.4.1 (Annex-A Sl VI) (Organotin: Triphenyltin)	-
Cl.4.1 (Annex-A Sl VII ) (Organotin: Monoctyltin)	-
Cl.4.1 (Annex-A Sl VIII) (Organotin: Bis (tributyltin) oxide)	-
Cl. No.8.6.1,Table 1 of IS 17011 (Chromium)	-
Cl. No.8.6.1,Table 1 of IS 17011 (Formaldehyde (free or released by partial hydrolysis))	-
Cl. No.8.6.1,Table 1 of IS 17011 (Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-
Cl.8 - Table No 1 (Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988)	-
Cl.4.1 (Table B-3 Sl I) (Allergenic Disperse Dyes :Disperse blue 3)	-
Cl.4.1 (Table B-3 Sl II) (Allergenic Disperse Dyes :Disperse blue 7)	-
Cl.4.1 (Table B-3 Sl III) (Allergenic Disperse Dyes :Disperse blue 26)	-
Cl.4.1 (Table B-3 Sl IV) (Allergenic Disperse Dyes :Disperse blue 102)	-
Cl.4.1 (Table B-3 Sl V) (Allergenic Disperse Dyes: Disperse brown 1)	-
Cl.4.1 (Table B-3 Sl VI) (Allergenic Disperse Dyes :Disperse yellow 1)	-
Cl.4.1 (Table B-3 Sl VII) (Allergenic Disperse Dyes :Disperse yellow 9)	-
Cl.4.1 (Table B-3 Sl VIII) (Allergenic Disperse Dyes :Disperse yellow 39)	-
Cl.4.1 (Table B-3 Sl IX) (Allergenic Disperse Dyes :Disperse yellow 49)	-
Cl.4.1 (Table B-3 Sl X) (Allergenic Disperse Dyes :Disperse orange 1)	-
Cl.4.1 (Table B-3 Sl XI) (Allergenic Disperse Dyes :Disperse red 11)	-
Cl.4.1 (Table B-3 Sl XII) (Allergenic Disperse Dyes :Disperse red 17)	-
Cl.4.1 (Table B-3 Sl XIII) (Allergenic Disperse Dyes :Disperse yellow 7)	-
Cl.4.1 (Table B-3 Sl XIV) (Allergenic Disperse Dyes :Disperse yellow 56)	-
Cl.4.1 (Table B-3 Sl XV) (Allergenic Disperse Dyes :Disperse red 151)	-
Cl.4.1 (Table B-3 Sl XVI) (Allergenic Disperse Dyes :Solvent red 23)	-
Cl.4.1 (Table B-4 Sl I) (Carcinogenic Disperse Dyes :Navy blue)	-
Cl.4.1 (Table B-4 Sl II) (Carcinogenic Disperse Dyes: Disperse blue 1)	-
Cl.4.1 (Table B-4 Sl III) (Carcinogenic Disperse Dyes: Disperse blue 35)	-
Cl.4.1 (Table B-4 Sl IV) (Carcinogenic Disperse Dyes :Disperse blue 106)	-
Cl.4.1 (Table B-4 Sl V) (Carcinogenic Disperse Dyes: Disperse blue 124)	-
Cl.4.1 (Table B-4 Sl VI) (Carcinogenic Disperse Dyes :Disperse yellow 3)	-
Cl.4.1 (Table B-4 Sl VII) (Carcinogenic Disperse Dyes: Disperse orange 3)	-
Cl.4.1 (Table B-4 Sl VIII) (Carcinogenic Disperse Dyes :Disperse orange 37/59/76a))	-
Cl.4.1 (Table B-4 Sl IX) (Carcinogenic Disperse Dyes :Disperse red 1)	-
Cl.4.1 (Table B-4 Sl X) (Carcinogenic Disperse Dyes :Basic red 9)	-
Cl.4.1 (Table B-4 Sl XI) (Carcinogenic Disperse Dyes :Violet 3)	-
Cl.4.1 (Table B-4 Sl XII) (Carcinogenic Disperse Dyes Disperse :yellow 23)	-
Cl 5.3.5, Table no 1 of IS 17011 (ix) (PCP-TeCP-TriCP polychlorophenols)	-
Cl 5.3.5, Table no 1 of IS 17011 (v) (Dimethyl fumarate (DMFU))	-
Cl 5.3.5, Table no 1 of IS 17011 (ii) (Aromatic amines released from Azo dyes (each individual amine))	-
Cl 5.3.5, Table no 1 of IS 17011 (iii) (Aromatic amines released from Azo dyes (each individual amine))	-
Cl 5.3.5, Table no 1 of IS 17011 (x) (pH)	-

-
Mech- Except , water resistance test (trough test). Mech Quantity:- 6 Pairs shoes + 1 slab of outsole (Size 200x200 mm of thickness 2.0+/-0.2 mm) for tear strength + 1 slab (size 200 x 200 mm of thickness 3.0+/- 0.2 mm) for Hydrolysis + Raw material + For multilayer outsole separate slab of outer layer of outsole to be provided for Abrasion Resistance test. Chem - Complete, Material declaration required for Innocuousness test.

7916

BIS, Eastern Regional Laboratory (ERL)

None

IS 15298 : Part 3 (2024)

Personal Protective Equipment Part 3 Protective Footwear (ISO 20346 : 2021, MOD) (Third Revision)

For all class, design and size

20400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5.2 (Design)	-
Cl 5.2.2 (" Height of upper ")	-
Cl 5.2.3 (Heel area)	-
Cl 5.3.1.1 (Construction of whole footwear)	-
Cl 5.3.1.2 (Upper/outsole bond strength)	-
Cl 5.3.2.1 (Toe protection - general)	-
Cl 5.3.2.2 (Internal length)	-
Cl 5.3.2.3 (Width of toecap flange)	-
Cl 5.3.2.4.1 (Corrosion resistance of Class I footwear and hybrid mounted footwear)	-
Cl 5.3.2.4.2 (Corrosion resistance of Class II and hybrid moulded footwear)	-
Cl 5.3.2.5 (Behaviour of toecaps (thermal and chemical) of Corrosion resistance)	-
Cl 5.3.2.6 (Impact resistance)	-
Cl 5.3.2.7 (Compression resistance)	-
Cl 5.3.3 (Leak proofness)	-
Cl 5.3.4 ("Specific ergonomic features ")	-
Cl 5.3.7 (Seam strength)	-
Cl 5.4.1.1 (Class I footwear, determination of the area where upper requirements apply of Upper)	-
Cl 5.4.1.2 (Hybrid footwear, determination of the area where upper requirements apply of Upper)	-
Cl 5.4.2 (Thickness)	-
Cl 5.4.3 (Tear strength)	-
Cl 5.4.4, Table 11 (Tensile properties- Tensile strength)	-
Cl 5.4.4, Table 11 (Tensile properties- Breaking Force)	-
Cl 5.4.4, Table 11 (Tensile properties-Modulus at 100 % elongation)	-
Cl 5.4.4, Table 11 (Tensile properties- Elongation at break)	-
Cl 5.4.6 (Water vapour permeability and coefficient)	-
Cl 5.4.7 (Resistance to hydrolysis)	-
Cl 5.5.2 (Lining- Tear strength)	-
Cl 5.5.3 (Lining- Abrasion resistance)	-
Cl 5.5.4 (Lining-Water vapour permeability and coefficient)	-
Cl 5.6.2 (Tear strength of tongue)	-
Cl 5.7.1 (Thickness of Insole, insock and footbed)	-
Cl 5.7.2 (Water permeability of insock)	-
Cl 5.7.3 (Water absorption and desorption of Insole, insock and footbed)	-
Cl 5.7.4.1 (Abrasion resistance of Insoles)	-
Cl 5.7.4.2 (Abrasion resistance of Insocks)	-
Cl 5.8.2.1 (Thickness of Outsole)	-
Cl 5.8.2.2 (Cleated area)	-
Cl 5.8.2.3 (Cleat height)	-
Cl 5.8.3 (Outsole- Tear strength)	-
Cl 5.8.4 (Outsole- Abrasion resistance)	-
Cl 5.8.5 (Outsole-Flexing resistance)	-
Cl 5.8.6 (Outsole-Resistance to hydrolysis)	-
Cl 5.8.7 (Interlayer bond strength)	-
Cl 5.3.6, Table no 1 of IS 17011 (ix) (PCP-TeCP-TriCP polychlorophenols)	-
Cl.1.4.1 of IS 17011 (Table B Sl I ) (Phthalate: DINP)	-
Cl.1.4.1 of IS 17011 (Table B Sl II ) (Phthalate:: DNOP)	-
Cl.1.4.1 of IS 17011 (Table B Sl III ) (Phthalate: DEHP)	-
Cl.1.4.1 of IS 17011 (Table B Sl IV ) (Phthalate: DIDP)	-
Cl.1.4.1 of IS 17011 (Table B Sl V) (Phthalate: BBP)	-
Cl.1.4.1 of IS 17011 (Table B Sl VI ) (Phthalate:DBP)	-
Cl.1.4.1 of IS 17011 (Table B Sl VII ) (Phthalate: DIBP)	-
Cl.4.1 (Annex-A Sl I ) (Organotin: Dibutyltin)	-
Cl.4.1 (Annex-A Sl II ) (Organotin: Dibutyltin Dichloride)	-
Cl.4.1 (Annex-A Sl III ) (Organotin: Dioctyltin)	-
Cl.4.1 (Annex-A Sl IV) (Organotin: Monobutyltin)	-
Cl.4.1 (Annex-A Sl V ) (Organotin: Tributyltin)	-
Cl.4.1 (Annex-A Sl VI) (Organotin: Triphenyltin)	-
Cl.4.1 (Annex-A Sl VII ) (Organotin: Monoctyltin)	-
Cl.4.1 (Annex-A Sl VIII) (Organotin: Bis (tributyltin) oxide)	-
Cl. No.8.6.1,Table 1 of IS 17011 (Formaldehyde (free or released by partial hydrolysis))	-
Cl. No.8.6.1,Table 1 of IS 17011 (Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-
Cl.8 - Table No 1 (Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988)	-
Cl.4.1 (Table B-3) (Allergenic and Carcinogenic Disperse Dyes)	-
Cl.4.1 (Table B-1 Sl I) (Aromatic Amines: 4-aminobiphenyl)	-
Cl.4.1 (Table B-1 Sl II) (Aromatic Amines: Benzidine)	-
Cl.4.1 (Table B-1 Sl III) (Aromatic Amines: 4-chloro-o-toluidine)	-
Cl.4.1 (Table B-1 Sl IV) (Aromatic Amines: 2-naphthylamine)	-
Cl.4.1 (Table B-1 Sl V) (Aromatic Amines :o-aminoazotoluene)	-
Cl.4.1 (Table B-1 Sl VI) (Aromatic Amines: 2-amino-4-nitrotoluenem)	-
Cl.4.1 (Table B-1 Sl VII) (Aromatic Amines: p-chloroaniline)	-
Cl.4.1 (Table B-1 Sl VIII) (Aromatic Amines: 2,4-diaminoanisole)	-
Cl.4.1 (Table B-1 Sl IX) (Aromatic Amines : 4,4’- diaminodiphenylmethane:)	-
Cl.4.1 (Table B-1 Sl X) (Aromatic Amines : 3,3’-dichlorobenzidine)	-
Cl.4.1 (Table B-1 Sl XI) (Aromatic Amines : 3,3’-dimethoxybenzidine)	-
Cl.4.1 (Table B-1 Sl XII) (Aromatic Amines : 3,3’-dimethylbenzidine)	-
Cl.4.1 (Table B-1 Sl XIII) (Aromatic Amines: 3,3’-dimethyl-4,4’-diaminodiphenylmethane)	-
Cl.4.1 (Table B-1 Sl XIV) (Aromatic Amines : p-cresidine)	-
Cl.4.1 (Table B-1 Sl XV) (Aromatic Amines : 4,4’-methylene-bis(2-chloroaniline):)	-
Cl.4.1 (Table B-1 Sl XVI) (Aromatic Amines :4,4’-oxydianiline)	-
Cl.4.1 (Table B-1 Sl XVII) (Aromatic Amines:4,4’-thiodianiline)	-
Cl.4.1 (Table B-1 Sl XVIII) (Aromatic Amines :o-toluidine:)	-
Cl.4.1 (Table B-1 Sl XIX) (Aromatic Amines: 2,4-toluylendiamine)	-
Cl.4.1 (Table B-1 Sl XX) (Aromatic Amines: 2,4,5-trimethylaniline)	-
Cl.4.1 (Table B-1 Sl XXI) (Aromatic Amines :2,4-dimethylaniline)	-
Cl.4.1 (Table B-1 Sl XXII) (Aromatic Amines: 2,6-dimethylaniline:)	-
Cl.4.1 (Table B-1 Sl XXIII) (Aromatic Amines :2-methoxyaniline)	-
Cl.4.1 (Table B-1 Sl XXIV) (Aromatic Amines :4-aminoazobenzene)	-

-
Mech- Except water resistance test (trough test), metatarsal protection. Quantity:- 6 Pairs shoes + 2 Toe caps(if metallic) + 5 Pairs Toe caps (if non -metallic)+ 1 slab of outsole (Size 200x200 mm of thickness 2.0+/-0.2 mm) for tear strength + 1 slab (size 200 x 200 mm of thickness 3.0+/- 0.2 mm) for Hydrolysis + Raw material + For multilayer outsole separate slab of outer layer of outsole to be provided for Abrasion Resistance test. Chem- Complete, Material declaration required for Innocuousness test.

7917

MS TESTING LABORATORY LLP

8187716

IS 2074 (2023)

Ready Mixed Paint Air Drying Red Oxide Zinc Chrome Priming -Specification (Fourth Revision)

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.1 (a)(Composition, Pigment, Cl 5.1.1)	-	500	-
Cl 5.1 (b)(Composition, Driers)	-	200	-
Cl 5.1 .1 (a)(Zinc chrome, (Type 2 of IS 51), Annex B)	-	500	-
Cl 5.1 .1 (b)(Synthetic red oxides of iron (conforming to Grade 2 or IS 44), (conforming to Grade 3 of IS 44), 6 of IS 6947 (Part 2))	-	500	-
Cl 5.1 .1 (c)(Suitable extenders)	-	500	-
Cl 5.1.2(Volatile vehicle)	-	500	-
Cl 5.2(Material)	-	200	-
Cl 5.3(Compatibility with Thinner, IS 1872)	-	200	-
Cl 5.4(Freedom from Objectionable Impurities)	-	200	-
Cl 5.5(Lead Restriction, IS 101(Part 8/Sec 5))	-	500	-
1 (i) (a) Table 1(Consistency, Annex C)	-	500	-
1 (i) (b) Table 1(Viscosity by ford cup No. 4, IS 101 (Part1/sec5))	-	500	-
1 (ii) Table 1(Mass, IS 101 (Part1/sec7))	-	500	-
1 (iii) (a) Table 1(Drying time, Surface Dry, IS 101 (Part3/sec1))	-	500	-
1 (iii) (b) Table 1(Drying time, Hard Dry, IS 101 (Part3/sec1))	-	500	-
1 (iv) (a) Table 1(Finish, IS 101 (Part3/sec4))	-	500	-
1 (iv) (b) Table 1(Gloss, IS 101 (Part4/sec4))	-	500	-
1 (v) Table 1(Fineness of grind, IS 101 (Part 3/Sec 5))	-	500	-
1 (vi) Table 1(Colour, IS 101 (Part 4/Sec 2))	-	500	-
1 (vii) (a) Table 1(Flexibility and adhesion: Bend test (with 6.25 mm dia mandrel and in type 1 apparatus), Clause 2 of IS 101 (Part 5/Sec 2))	-	500	-
1 (vii) (b) Table 1(Scratch hardness (load 1 000g), Clause 3 of IS 101 (Part 5/Sec 2))	-	500	-
1 (viii) Table 1(Flash point, IS 101 (Part l/Sec 6))	-	500	-
1 (ix) Table 1(Volume solids, IS 101 (Part 8/Sec 6))	-	800	-
1 (x) (a) Table 1(Resistance to humidity under condition of condensation: Resistance to humidity, Clause 2 of IS 101 (Part 6/Sec 1))	-	2000	-
1 (x) (b) Table 1(Resistance to humidity under condition of condensation: Resistance to sea water (applicable for marine paints only), Annex D)	-	1000	-
1 (x) (c) Table 1(Resistance to humidity under condition of condensation: Resistance to salt spray, Annex E)	-	2000	-
1 (xi) Table 1(Accelerated storage stability test, Annex F)	-	1000	-
1 (xii) Table 1(Keeping properties, IS 101 (Part 6/Sec 2))	-	2000	Keeping properties test report will be done after 12 months
Cl 5.1 (a)(Composition, Pigment, Cl 5.1.1)	-	500	-
Cl 5.1 (b)(Composition, Driers)	-	200	-
Cl 5.1 .1 (a)(Zinc chrome, (Type 2 of IS 51), Annex B)	-	500	-
Cl 5.1 .1 (b)(Synthetic red oxides of iron (conforming to Grade 2 or IS 44), (conforming to Grade 3 of IS 44), 6 of IS 6947 (Part 2))	-	500	-
Cl 5.1 .1 (c)(Suitable extenders)	-	500	-
Cl 5.1.2(Volatile vehicle)	-	500	-
Cl 5.2(Material)	-	200	-
Cl 5.3(Compatibility with Thinner, IS 1872)	-	200	-
Cl 5.4(Freedom from Objectionable Impurities)	-	200	-
Cl 5.5(Lead Restriction, IS 101(Part 8/Sec 5))	-	500	-
1 (i) (a) Table 1(Consistency, Annex C)	-	500	-
1 (i) (b) Table 1(Viscosity by ford cup No. 4, IS 101 (Part1/sec5))	-	500	-
1 (ii) Table 1(Mass, IS 101 (Part1/sec7))	-	500	-
1 (iii) (a) Table 1(Drying time, Surface Dry, IS 101 (Part3/sec1))	-	500	-
1 (iii) (b) Table 1(Drying time, Hard Dry, IS 101 (Part3/sec1))	-	500	-
1 (iv) (a) Table 1(Finish, IS 101 (Part3/sec4))	-	500	-
1 (iv) (b) Table 1(Gloss, IS 101 (Part4/sec4))	-	500	-
1 (v) Table 1(Fineness of grind, IS 101 (Part 3/Sec 5))	-	500	-
1 (vi) Table 1(Colour, IS 101 (Part 4/Sec 2))	-	500	-
1 (vii) (a) Table 1(Flexibility and adhesion: Bend test (with 6.25 mm dia mandrel and in type 1 apparatus), Clause 2 of IS 101 (Part 5/Sec 2))	-	500	-
1 (vii) (b) Table 1(Scratch hardness (load 1 000g), Clause 3 of IS 101 (Part 5/Sec 2))	-	500	-
1 (viii) Table 1(Flash point, IS 101 (Part l/Sec 6))	-	500	-
1 (ix) Table 1(Volume solids, IS 101 (Part 8/Sec 6))	-	800	-
1 (x) (a) Table 1(Resistance to humidity under condition of condensation: Resistance to humidity, Clause 2 of IS 101 (Part 6/Sec 1))	-	2000	-
1 (x) (b) Table 1(Resistance to humidity under condition of condensation: Resistance to sea water (applicable for marine paints only), Annex D)	-	1000	-
1 (x) (c) Table 1(Resistance to humidity under condition of condensation: Resistance to salt spray, Annex E)	-	2000	-
1 (xi) Table 1(Accelerated storage stability test, Annex F)	-	1000	-
1 (xii) Table 1, Cl.5.6(Keeping properties 1. Visual observation [Cl.3.1, table 1 of IS 101 (Part 6/Sec 2)])	-	2000	-
1 (xii) Table 1, Cl.5.6(Keeping properties 5. Loss of mass resulting from Storage [Cl.3.5 of IS 101 (Part 6/Sec 2)])	-	500	-
1 (xii) Table 1, Cl.5.6(Keeping properties 4. Observation of dried film [Cl.3.4, table 1 of IS 101 (Part 6/Sec 2)])	-	500	-
1 (xii) Table 1, Cl.5.6(Keeping properties 3. Degree of settling [Cl.3.3, table 2 of IS 101 (Part 6/Sec 2)])	-	500	-
1 (xii) Table 1, Cl.5.6(Keeping properties 2. Change in skinning [Cl.3.2, table 2 of IS 101 (Part 6/Sec 2)]v)	-	500	-
Clause 5.1 Note(IS 101 Part 8 Sec 2)	-	500	-
Clause 5.1 Note(Non Volatile Vehicle)	-	500	-
6.2(Marking)	-	200	-
Clause 5.1 Note(Non Volatile Vehicle)	-	500	-
Cl-4(The smell of the material shall not be objectionable during application)	-	200	-
Cl-5.1 (a)(Pigment)	-	500	-
Cl-5.1 (b)(Driers)	-	200	-
Cl-5.1.1 (a)("Zinc oxide content Chromic anhydride content")	-	500	-
Cl-5.1.1 (b)(Synthetic red oxides of iron or Natural red oxides of iron or A mixture of both which shall correspond to red oxide, percent by mass)	-	500	-
Cl-5.1.1 (c)(Suitable extenders)	-	500	-
Cl-5.1.2(volatile vehicle)	-	500	-
Cl-5.2(Material)	-	200	-
Cl-5.3(Compatibility with Thinner)	-	200	-
Cl-5.4(Freedom from Objectionable Impurities)	-	200	-
Cl-5.5(Lead Restriction)	-	500	-
Cl-5.6 & 8 Table-1 (i) (a)(Consistency)	-	500	-
Cl-5.6 & 8, Table-1 (i) (b)(Viscosity by ford cup No. 4 at 27±2°C)	-	500	-
Cl-5.6 & 8, Table-1 (ii)(Mass, in kg/10 1, Min)	-	500	-
Cl-5.6 & 8, Table-1 (iii)("Drying time, h, Max a) Surface dry b) Hard dry")	-	1000	-
Cl-5.6 & 8, Table-1 (iv)(a) Finish)	-	500	-
Cl-5.6 & 8, Table-1 (iv)(b) Gloss 60° , Max)	-	500	-
Cl-5.6 & 8, Table-1 (v)(Fineness of grind, microns, Max)	-	500	-
Cl-5.6 & 8, Table-1 (vi)(Colour)	-	500	-
Cl-5.6 & 8,, Table-1 (vii) a)(Flexibility and adhesion: Bend test with 6.25mm dia mandrel and in type 1 apparatus)	-	500	-
Cl-5.6 & 8, Table-1 (viii)(Flash point)	-	500	-
Cl-5.6 & 8,, Table-1 (ix)(Volume solids, percent)	-	800	-
Cl-5.6 & 8,, Table-1 (x) (a)(Resistance to humidity)	-	2000	-
Cl-5.6 & 8, Table-1 (x) (b)("Resistance to sea water (applicable for marine paints only)")	-	1000	-
Cl-5.6 & 8, Table-1 (x) (c)(Resistance to salt spray)	-	2000	-
Cl-5.6 & 8, Table-1 (xi)(Accelerated storage stability test)	-	1000	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Visual observation (Corrosion and odour of putrefaction, rancidity or souring) ")	-	2000	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Change in skinning")	-	500	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Degree of settling ")	-	500	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Observation of dried film ")	-	500	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Loss of mass resulting from Storage ")	-	500	-
Cl-5.7, Table-2 (i)(Consistency)	-	500	-
Cl-5.7, Table-2 (ii)(Hard dry, h, Max)	-	500	-
Cl-5.7, Table-2 (iii)(Non- volatile vehicle, percent, Min)	-	500	-
Cl-5.7, Table-2 (iv)(Wet opacity, m2 /10 l, Min)	-	500	-
Cl-5.6 & 8,, Table-1 (vii) b)(Flexibility and adhesion: Scratch hardness)	-	0	-

28 Aug, 2028

-
-

7918

BIS, Eastern Regional Laboratory (ERL)

None

IS 15914 (2011)

High tensile strength flat rolled steel plate (Up To 6 Mm), sheet and strip for the manufacture of welded gas cylinder - Specification

All grades

Rs. 7760/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 7 (UTM)	-
Cl 9 (Workmanship)	-
Cl. 10 (Mass)	-
Cl 10 (Length, Width & Thickness)	-
Cl. 7 Table 3 (Elongation)	-
Cl. 7 Table 3 (Yield Stress)	-
6.0 (CARBON)	-
6.0 (SULPHUR)	-
6.0 (PHOSPHORUS)	-
6.0 (MANGANESE)	-
6.0 (SILICON)	-
6.0 (NITROGEN)	-

-
Except C,S, P, Mn, Si, N(except Al and microalloying elements), Grade to be declared

7919

ALAIPURIA TEST HOUSE PRIVATE LIMITED, GHAZIABAD

8180426

IS 302 : Part 2 : Sec 9 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 9 toasters, grills, roasters and similar appliances (First Revision)

-----

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.31(Verification)	-	50	-
Cl.30(Verification)	-	50	-
CL.29(Verification)	-	50	-
Cl.28(Verification)	-	50	-
Cl.27(Verification)	-	50	-
Cl.26(Verification)	-	50	-
Cl.25(Verification)	-	50	-
Cl.24(Verification)	-	50	-
Cl.23(Verification)	-	50	-
Cl.22(Verification)	-	50	-
Cl.21(Verification)	-	50	-
Cl.20(Verification)	-	50	-
Cl.19(Verification)	-	50	-
Cl. 16(Verification)	-	50	-
Cl.15.1(Moisture Resistance)	-	50	-
Cl.14(Verification)	-	50	-
Cl.13(Verification)	-	50	-
Cl.11(Verification)	-	50	-
Cl.10(Verification)	-	50	-
Cl.8(Verification)	-	50	-
Cl. 7(Verification)	-	50	-
Cl. 6(Classification- IS 302-1)	-	50	-
Cl. 31 IS 302-2-9(Resistance To Rusting )	-	500	-
Cl. 30 IS 302-2-9(Resistance To Heat, Fire And Tracking)	-	500	-
Cl. 29 IS 302-2-9(Creepage Distances, Clearances And Distances Through Insulation)	-	500	-
Cl. 28 IS 302-2-9(Screws and Connections)	-	100	-
Cl. 27 IS 302-2-9(Provision For Earthing )	-	500	-
Cl. 26 IS 302-2-9(Terminal For External Conductors )	-	100	-
Cl. 25 IS 302-2-9(Supply Connections and External Flexible Cables and Cords )	-	500	-
Cl. 24 IS 302-2-9(Components)	-	200	-
Cl. 23 IS 302-2-9(Internal Wiring)	-	200	-
Cl. 22 IS 302-2-9(Construction )	-	200	-
Cl. 21 IS 302-2-9(Mechanical Strength)	-	200	-
Cl. 20 IS 302-2-9(Stability and mechanical Hazards)	-	200	-
Cl. 19 IS 302-2-9(Abnormal Operation )	-	500	-
Cl. 18 IS 302-2-9(Endurance)	-	200	-
Cl. 17 IS 302-2-9(Overload protection of transformers and associated circuits.)	-	200	-
Cl. 16 IS 302-2-9(Leakage Current and Electric strength )	-	500	-
Cl. 15 IS 302-2-9(Moisture Resistance)	-	500	-
Cl. 14 IS 302-2-9(Transient overvoltage)	-	500	-
Cl. 13.3 IS 302-2-9(Leakage Current & Electric Strength at Operating Temperature)	-	500	-
Cl. 11 IS 302-2-9(Heating)	-	500	-
Cl. 10 IS 302-2-9(Power Input and Current )	-	1000	-
Cl. 9 IS 302-2-9(Starting of motor operated appliances)	-	250	-
Cl. 8 IS 302-2-9(Protection against access to live parts)	-	500	-
Cl. 7 IS 302-2-9(Marking and Instruction)	-	200	-
Cl. 6 IS 302-2-9(Classification- IS 302-1)	-	200	-
31(Resistance to rusting)	-	50	-
31(Resistance to rusting)	-	50	-
30.2.4(Resistance to heat and fire)	-	50	-
30.2(Resistance to heat and fire)	-	50	-
30.1(Resistance to heat and fire)	-	50	-
29.3(Clearances, creepage distances and solid insulation)	-	50	-
29.2(Clearances, creepage distances and solid insulation)	-	50	-
29.2(Clearances, creepage distances and solid insulation)	-	50	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	50	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	50	-
28.2 to 28.4(Screws and connections)	-	50	-
28.1, Table No.-14(Screws and connections)	-	50	-
27.6(Provision for earthing)	-	50	-
27.5(Provision for earthing)	-	50	-
27.1 to 27.4(Provision for earthing)	-	50	-
26.10 & 26.11(Terminals for external conductors)	-	50	-
26.9(Terminals for external conductors)	-	50	-
26.1 to 26.8(Terminals for external conductors)	-	50	-
25.16 to 25.25(Supply connection and external flexible cords)	-	50	-
25.15(Supply connection and external flexible cords)	-	50	-
25.14(Supply connection and external flexible cords)	-	50	-
25.14(Supply connection and external flexible cords)	-	50	-
25.9 to 25.13(Supply connection and external flexible cords)	-	50	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	50	-
25.5 to 25.7(Supply connection and external flexible cords)	-	50	-
25.4(Supply connection and external flexible cords)	-	50	-
25.3(Supply connection and external flexible cords)	-	50	-
25.2(Supply connection and external flexible cords)	-	50	-
25.1(Supply connection and external flexible cords)	-	50	-
24.101(Components)	-	50	-
24.101(Components)	-	50	-
24.2 to 24.6(Components)	-	50	-
24.1(Components)	-	50	-
23.6 to 23.10(Internal wiring)	-	50	-
23.5(Internal wiring)	-	50	-
23.4(Internal wiring)	-	50	-
23.3(Internal wiring)	-	50	-
23.1 & 23.2(Internal wiring)	-	50	-
22.111(Constructions)	-	50	-
22.111(Constructions)	-	50	-
22.11o(Constructions)	-	50	-
22.109(Constructions)	-	50	-
22.108(Constructions)	-	50	-
22.101 to 22.107(Constructions)	-	50	-
22.13 to 22.48(Constructions)	-	50	-
22.12(Constructions)	-	50	-
22.11(Constructions)	-	50	-
22.11(Constructions)	-	50	-
22.7 to 22.10(Constructions)	-	50	-
22.6(Constructions)	-	50	-
22.5(Constructions)	-	50	-
22.4(Constructions)	-	50	-
22.3(Constructions)	-	50	-
22.2(Constructions)	-	50	-
22.1(Constructions)	-	50	-
21.101(MECHANICAL STRENGTH)	-	50	-
21.101(MECHANICAL STRENGTH)	-	50	-
21.2(MECHANICAL STRENGTH)	-	50	-
21.1(MECHANICAL STRENGTH)	-	50	-
20.2(Stability and mechanical hazards)	-	50	-
20.1(Stability and mechanical hazards)	-	50	-
19.104(ABNORMAL OPERATION)	-	50	-
19.103(ABNORMAL OPERATION)	-	50	-
19.102(ABNORMAL OPERATION)	-	50	-
19.101(ABNORMAL OPERATION)	-	50	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	50	-
17(Overload protection of transformers and associated circuits)	-	50	-
16.3(Insulation resistance test)	-	50	-
16.3(Electric strength test)	-	50	-
16.1 & 16.2(Leakage current test)	-	50	-
15.3(Moisture resistance)	-	50	-
15.3(Moisture resistance)	-	50	-
15.3(Moisture resistance)	-	50	-
15.2(Moisture resistance)	-	50	-
15.2(Moisture resistance)	-	50	-
15.2(Moisture resistance)	-	50	-
15.2(Moisture resistance)	-	50	-
15.1(Moisture resistance)	-	50	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	50	-
13.3 and Table No.- 4(Electric strength test)	-	50	-
13.1, 13.2(Leakage current test)	-	50	-
13.1, 13.2(Leakage current test)	-	50	-
11.101(Heating)	-	50	-
11.1 to 11.8, Table No.-3(Heating)	-	50	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	50	-
8.1.5(Protection against access to live parts)	-	50	-
8.1.4(Protection against access to live parts)	-	50	-
8.1.3(Protection against access to live parts)	-	50	-
8.1.2(Protection against access to live parts)	-	50	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	50	-
7.14(Legibility & Durability of Markings test)	-	50	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	50	-
31(Resistance to rusting)	-	50	-
31(Resistance to rusting)	-	50	-
30.2.4(Resistance to heat and fire)	-	50	-
30.2(Resistance to heat and fire)	-	50	-
30.1(Resistance to heat and fire)	-	50	-
29.3(Clearances, creepage distances and solid insulation)	-	50	-
29.2(Clearances, creepage distances and solid insulation)	-	50	-
29.2(Clearances, creepage distances and solid insulation)	-	50	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	50	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	50	-
28.2 to 28.4(Screws and connections)	-	50	-
28.1, Table No.-14(Screws and connections)	-	50	-
27.6(Provision for earthing)	-	50	-
27.5(Provision for earthing)	-	50	-
27.1 to 27.4(Provision for earthing)	-	50	-
26.10 & 26.11(Terminals for external conductors)	-	50	-
26.9(Terminals for external conductors)	-	50	-
26.1 to 26.8(Terminals for external conductors)	-	50	-
25.16 to 25.25(Supply connection and external flexible cords)	-	50	-
25.15(Supply connection and external flexible cords)	-	50	-
25.14(Supply connection and external flexible cords)	-	50	-
25.9 to 25.13(Supply connection and external flexible cords)	-	50	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	50	-
25.5 to 25.7(Supply connection and external flexible cords)	-	50	-
25.4(Supply connection and external flexible cords)	-	50	-
25.3(Supply connection and external flexible cords)	-	50	-
25.2(Supply connection and external flexible cords)	-	50	-
25.1(Supply connection and external flexible cords)	-	50	-
24.101(Components)	-	50	-
24.101(Components)	-	50	-
24.2 to 24.6(Components)	-	50	-
24.1(Components)	-	50	-
23.6 to 23.10(Internal wiring)	-	50	-
23.5(Internal wiring)	-	50	-
23.4(Internal wiring)	-	50	-
23.3(Internal wiring)	-	50	-
23.1 & 23.2(Internal wiring)	-	50	-
22.111(Constructions)	-	50	-
22.111(Constructions)	-	50	-
22.11o(Constructions)	-	50	-
22.109(Constructions)	-	50	-
22.108(Constructions)	-	50	-
22.101 to 22.107(Constructions)	-	50	-
22.13 to 22.48(Constructions)	-	50	-
22.12(Constructions)	-	50	-
22.11(Constructions)	-	50	-
22.11(Constructions)	-	50	-
22.7 to 22.10(Constructions)	-	50	-
22.6(Constructions)	-	50	-
22.5(Constructions)	-	50	-
22.4(Constructions)	-	50	-
22.3(Constructions)	-	50	-
22.2(Constructions)	-	50	-
21.101(MECHANICAL STRENGTH)	-	50	-
21.101(MECHANICAL STRENGTH)	-	50	-
21.2(MECHANICAL STRENGTH)	-	50	-
21.1(MECHANICAL STRENGTH)	-	50	-
20.2(Stability and mechanical hazards)	-	50	-
20.1(Stability and mechanical hazards)	-	50	-
19.104(ABNORMAL OPERATION)	-	50	-
19.103(ABNORMAL OPERATION)	-	50	-
19.102(ABNORMAL OPERATION)	-	50	-
19.101(ABNORMAL OPERATION)	-	50	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	50	-
17(Overload protection of transformers and associated circuits)	-	50	-
16.3(Insulation resistance test)	-	50	-
16.1 & 16.2(Leakage current test)	-	50	-
15.3(Moisture resistance)	-	50	-
15.3(Moisture resistance)	-	50	-
15.3(Moisture resistance)	-	50	-
15.2(Moisture resistance)	-	50	-
15.2(Moisture resistance)	-	50	-
15.2(Moisture resistance)	-	50	-
15.2(Moisture resistance)	-	50	-
15.1(Moisture resistance)	-	50	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	50	-
13.3 and Table No.- 4(Electric strength test)	-	50	-
13.1, 13.2(Leakage current test)	-	50	-
13.1, 13.2(Leakage current test)	-	50	-
11.101(Heating)	-	50	-
11.1 to 11.8, Table No.-3(Heating)	-	50	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	50	-
8.1.5(Protection against access to live parts)	-	50	-
8.1.4(Protection against access to live parts)	-	50	-
8.1.3(Protection against access to live parts)	-	50	-
8.1.2(Protection against access to live parts)	-	50	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	50	-
7.14(Legibility & Durability of Markings test)	-	50	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	50	-
31(Resistance to Rusting)	-	50	-
30(Resistance to Heat & Fire)	-	50	-
29(Clearances, Creepage Distances & Solid Insulation)	-	50	-
28(Screws & Connections)	-	50	-
27(Provision For Earthing)	-	50	-
26(Terminals For External Conductors)	-	50	-
25(Supply Connection & External Flexible Cords)	-	50	-
24(Components)	-	50	-
23(Internal wiring)	-	50	-
22(Construction)	-	50	-
21(Mechanical strength)	-	50	-
20(Stability & Mechanical Hazards)	-	50	-
19(Abnormal Operation)	-	50	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	50	-
16(Leakage Current and Electric Strength)	-	50	-
15(Moisture Resistance)	-	50	-
14(Transient Over Voltage)	-	50	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	50	-
11(Temperature Rise/ Heating)	-	50	-
10(Power Input & Current)	-	50	-
9(Starting Of Motor Operated Appliances)	-	50	-
8(Protection against access to live parts)	-	50	-
31(Resistance to Rusting)	-	50	-
30(Resistance to Heat & Fire)	-	50	-
29(Clearances, Creepage Distances & Solid Insulation)	-	50	-
28(Screws & Connections)	-	50	-
27(Provision For Earthing)	-	50	-
26(Terminals For External Conductors)	-	50	-
25(Supply Connection & External Flexible Cords)	-	50	-
24(Components)	-	50	-
23(Internal wiring)	-	50	-
22(Construction)	-	50	-
21(Mechanical strength)	-	50	-
20(Stability & Mechanical Hazards)	-	50	-
19(Abnormal Operation)	-	50	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	50	-
16(Leakage Current and Electric Strength)	-	50	-
15(Moisture Resistance)	-	50	-
14(Transient Over Voltage)	-	50	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	50	-
11(Temperature Rise/ Heating)	-	50	-
10(Power Input & Current)	-	50	-
9(Starting Of Motor Operated Appliances)	-	50	-
8(Protection against access to live parts)	-	50	-
25.14(Supply connection and external flexible cords)	-	50	-
22.1(Constructions)	-	50	-
16.3(Electric strength test)	-	50	-

03 Oct, 2027

-
Included.w.e.f.07.11.2024 Exclusion 32 (RADIATION, TOXICITY AND SIMILAR HAZARDS) 19.11.4.1 to 19.11.4.5 (EMI/EMC)

7920

Standard Testing and Compliance Private Limited

6178726

IS 302 : Part 2 : Sec 15 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 15 appliances for heating liquids (First Revision)

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	500	15% Discount to BIS
7(Marking and instructions)	-	1000	15% Discount to BIS
8(Protection against live parts)	-	500	15% Discount to BIS
10(POWER INPUT AND CURRENT)	-	1000	15% Discount to BIS
11(HEATING)	-	1000	15% Discount to BIS
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	1000	15% Discount to BIS
14(TRANSIENT OVERVOLTAGES)	-	1000	15% Discount to BIS
15(MOISTURE RESISTANCE)	-	1000	15% Discount to BIS
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	1000	15% Discount to BIS
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	1000	15% Discount to BIS
19(ABNORMAL OPERATION)	-	1000	15% Discount to BIS
20(STABILITY AND MECHANICAL HAZARDS)	-	500	15% Discount to BIS
21(MECHANICAL STRENGTH)	-	1000	15% Discount to BIS
22(CONSTRUCTION)	-	1000	15% Discount to BIS
23(INTERNAL WIRING)	-	500	15% Discount to BIS
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	500	15% Discount to BIS
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	500	15% Discount to BIS
27(PROVISION FOR EARTHING)	-	500	15% Discount to BIS
28(SCREWS AND CONNECTIONS)	-	500	15% Discount to BIS
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	1000	15% Discount to BIS
30(RESISTANCE TO HEAT AND FIRE)	-	1000	15% Discount to BIS
31(RESISTANCE TO RUSTING)	-	1000	15% Discount to BIS
22.3(Flexing test)	-	0	-
4(General requirements)	-	0	-
5(General Conditions of tests)	-	0	-
6(Classification- IS 302-1)	-	0	-
6(Classification- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.3(Marking- IS 302-1)	-	0	-
7.4(Marking- IS 302-1)	-	0	-
7.5(Marking- IS 302-1)	-	0	-
7.6(Marking- IS 302-1)	-	0	-
7.7(Marking- IS 302-1)	-	0	-
7.8(Marking- IS 302-1)	-	0	-
6(Classification- IS 302-1)	-	0	-
6(Classification- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
Marking- IS 302-1(Marking- IS 302-1)	-	0	-
7.3(Marking- IS 302-1)	-	0	-
7.4(Marking- IS 302-1)	-	0	-
7.5(Marking- IS 302-1)	-	0	-
7.6(Marking- IS 302-1)	-	0	-
7.7(Marking- IS 302-1)	-	0	-
7.8(Marking- IS 302-1)	-	0	-
7.9(Marking- IS 302-1)	-	0	-
7.1O(Marking- IS 302-1)	-	0	-
7.11(Marking- IS 302-1)	-	0	-
7.12(Marking- IS 302-2-15)	-	0	-
7.12(Marking- IS 302-1)	-	0	-
7.12.1(Marking- IS 302-1)	-	0	-
7.12.3(Marking- IS 302-1)	-	0	-
7.12.5(Marking- IS 302-1)	-	0	-
7.12.6(Marking- IS 302-1)	-	0	-
7.13(Marking- IS 302-1)	-	0	-
7.14(Marking- IS 302-1)	-	0	-
7.15(Marking- IS 302-1)	-	0	-
8(Protection Against Electric Shock, IS 302-1)	-	0	-
10(Power Input and Current, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	0	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	0	-
15.1(Moisture Resistance, IS 302-1)	-	0	-
15.2(Spillage test as 15.2, IS 3.02-1 & 302-2-15)	-	0	-
16(Leakage current as per Cl 16, IS 302-1)	-	0	-
16(electric strength as per Cl 16, IS 302-1)	-	0	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	0	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	0	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	0	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	0	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	0	-
21.1(Mechanical Strength, IS 302-1)	-	0	-
23.2(Internal Wiring, IS 302-1)	-	0	-
21.2(Mechanical Strength, IS 302-1)	-	0	-
22.1(Construction, IS 302-1)	-	0	-
23.1(Internal Wiring, IS 302-1)	-	0	-
23.4(Internal Wiring, IS 302-1)	-	0	-
23.5(Internal Wiring, IS 302-1)	-	0	-
23.6(Internal Wiring, IS 302-1)	-	0	-
23.7(Internal Wiring, IS 302-1)	-	0	-
23.8(Internal Wiring, IS 302-1)	-	0	-
23.9(Internal Wiring, IS 302-1)	-	0	-
23.1O(Internal Wiring, IS 302-1)	-	0	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.9(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
26(Terminals for External Conductors, IS 302-1)	-	0	-
27.1(Provision for Earthing, IS 302-1)	-	0	-
27.2(Provision for Earthing, IS 302-1)	-	0	-
27.3(Provision for Earthing, IS 302-1)	-	0	-
27.4(Provision for Earthing, IS 302-1)	-	0	-
27.5(Provision for Earthing, IS 302-1)	-	0	-
28(Screws & Connections, IS 302-1)	-	0	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	0	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	0	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	0	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	0	-
31(Resistance of Rusting, IS 302-1)	-	0	-
6.0(Classification)	-	0	-
7(Marking and instructions)	-	0	-
8(Protection against live parts)	-	0	-
10(POWER INPUT AND CURRENT)	-	0	-
11(HEATING)	-	0	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	0	-
14(TRANSIENT OVERVOLTAGES)	-	0	-
15(MOISTURE RESISTANCE)	-	0	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	0	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	0	-
19(ABNORMAL OPERATION)	-	0	-
20(STABILITY AND MECHANICAL HAZARDS)	-	0	-
21(MECHANICAL STRENGTH)	-	0	-
22(CONSTRUCTION)	-	0	-
23(INTERNAL WIRING)	-	0	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	0	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
27(PROVISION FOR EARTHING)	-	0	-
28(SCREWS AND CONNECTIONS)	-	0	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	0	-
30(RESISTANCE TO HEAT AND FIRE)	-	0	-
31(RESISTANCE TO RUSTING)	-	0	-
22.3(Flexing test)	-	0	-
4(General requirements)	-	0	-
5(General Conditions of tests)	-	0	-
6(Classification- IS 302-1)	-	0	-
6(Classification- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.3(Marking- IS 302-1)	-	0	-
7.4(Marking- IS 302-1)	-	0	-
7.5(Marking- IS 302-1)	-	0	-
7.6(Marking- IS 302-1)	-	0	-
7.7(Marking- IS 302-1)	-	0	-
7.8(Marking- IS 302-1)	-	0	-
6(Classification- IS 302-1)	-	0	-
6(Classification- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
Marking- IS 302-1(Marking- IS 302-1)	-	0	-
7.3(Marking- IS 302-1)	-	0	-
7.4(Marking- IS 302-1)	-	0	-
7.5(Marking- IS 302-1)	-	0	-
7.6(Marking- IS 302-1)	-	0	-
7.7(Marking- IS 302-1)	-	0	-
7.8(Marking- IS 302-1)	-	0	-
7.9(Marking- IS 302-1)	-	0	-
7.1O(Marking- IS 302-1)	-	0	-
7.11(Marking- IS 302-1)	-	0	-
7.12(Marking- IS 302-2-15)	-	0	-
7.12(Marking- IS 302-1)	-	0	-
7.12.1(Marking- IS 302-1)	-	0	-
7.12.3(Marking- IS 302-1)	-	0	-
7.12.5(Marking- IS 302-1)	-	0	-
7.12.6(Marking- IS 302-1)	-	0	-
7.13(Marking- IS 302-1)	-	0	-
7.14(Marking- IS 302-1)	-	0	-
7.15(Marking- IS 302-1)	-	0	-
8(Protection Against Electric Shock, IS 302-1)	-	0	-
10(Power Input and Current, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	0	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	0	-
15.1(Moisture Resistance, IS 302-1)	-	0	-
15.2(Spillage test as 15.2, IS 3.02-1 & 302-2-15)	-	0	-
16(Leakage current as per Cl 16, IS 302-1)	-	0	-
16(electric strength as per Cl 16, IS 302-1)	-	0	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	0	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	0	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	0	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	0	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	0	-
21.1(Mechanical Strength, IS 302-1)	-	0	-
23.2(Internal Wiring, IS 302-1)	-	0	-
21.2(Mechanical Strength, IS 302-1)	-	0	-
22.1(Construction, IS 302-1)	-	0	-
23.1(Internal Wiring, IS 302-1)	-	0	-
23.4(Internal Wiring, IS 302-1)	-	0	-
23.5(Internal Wiring, IS 302-1)	-	0	-
23.6(Internal Wiring, IS 302-1)	-	0	-
23.7(Internal Wiring, IS 302-1)	-	0	-
23.8(Internal Wiring, IS 302-1)	-	0	-
23.9(Internal Wiring, IS 302-1)	-	0	-
23.1O(Internal Wiring, IS 302-1)	-	0	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.9(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
26(Terminals for External Conductors, IS 302-1)	-	0	-
27.1(Provision for Earthing, IS 302-1)	-	0	-
27.2(Provision for Earthing, IS 302-1)	-	0	-
27.3(Provision for Earthing, IS 302-1)	-	0	-
27.4(Provision for Earthing, IS 302-1)	-	0	-
27.5(Provision for Earthing, IS 302-1)	-	0	-
28(Screws & Connections, IS 302-1)	-	0	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	0	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	0	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	0	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	0	-
31(Resistance of Rusting, IS 302-1)	-	0	-
6.0(Classification)	-	0	-
7(Marking and instructions)	-	0	-
8(Protection against live parts)	-	0	-
10(POWER INPUT AND CURRENT)	-	0	-
11(HEATING)	-	0	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	0	-
14(TRANSIENT OVERVOLTAGES)	-	0	-
15(MOISTURE RESISTANCE)	-	0	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	0	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	0	-
19(ABNORMAL OPERATION)	-	0	-
20(STABILITY AND MECHANICAL HAZARDS)	-	0	-
21(MECHANICAL STRENGTH)	-	0	-
22(CONSTRUCTION)	-	0	-
23(INTERNAL WIRING)	-	0	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	0	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
27(PROVISION FOR EARTHING)	-	0	-
28(SCREWS AND CONNECTIONS)	-	0	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	0	-
30(RESISTANCE TO HEAT AND FIRE)	-	0	-
31(RESISTANCE TO RUSTING)	-	0	-
22.3(Flexing test)	-	0	-
4(General requirements)	-	0	-
5(General Conditions of tests)	-	0	-
6(Classification- IS 302-1)	-	0	-
6(Classification- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.3(Marking- IS 302-1)	-	0	-
7.4(Marking- IS 302-1)	-	0	-
7.5(Marking- IS 302-1)	-	0	-
7.6(Marking- IS 302-1)	-	0	-
7.7(Marking- IS 302-1)	-	0	-
7.8(Marking- IS 302-1)	-	0	-
6(Classification- IS 302-1)	-	0	-
6(Classification- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
Marking- IS 302-1(Marking- IS 302-1)	-	0	-
7.3(Marking- IS 302-1)	-	0	-
7.4(Marking- IS 302-1)	-	0	-
7.5(Marking- IS 302-1)	-	0	-
7.6(Marking- IS 302-1)	-	0	-
7.7(Marking- IS 302-1)	-	0	-
7.8(Marking- IS 302-1)	-	0	-
7.9(Marking- IS 302-1)	-	0	-
7.1O(Marking- IS 302-1)	-	0	-
7.11(Marking- IS 302-1)	-	0	-
7.12(Marking- IS 302-2-15)	-	0	-
7.12(Marking- IS 302-1)	-	0	-
7.12.1(Marking- IS 302-1)	-	0	-
7.12.3(Marking- IS 302-1)	-	0	-
7.12.5(Marking- IS 302-1)	-	0	-
7.12.6(Marking- IS 302-1)	-	0	-
7.13(Marking- IS 302-1)	-	0	-
7.14(Marking- IS 302-1)	-	0	-
7.15(Marking- IS 302-1)	-	0	-
8(Protection Against Electric Shock, IS 302-1)	-	0	-
10(Power Input and Current, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	0	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	0	-
15.1(Moisture Resistance, IS 302-1)	-	0	-
15.2(Spillage test as 15.2, IS 3.02-1 & 302-2-15)	-	0	-
16(Leakage current as per Cl 16, IS 302-1)	-	0	-
16(electric strength as per Cl 16, IS 302-1)	-	0	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	0	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	0	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	0	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	0	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	0	-
21.1(Mechanical Strength, IS 302-1)	-	0	-
23.2(Internal Wiring, IS 302-1)	-	0	-
21.2(Mechanical Strength, IS 302-1)	-	0	-
22.1(Construction, IS 302-1)	-	0	-
23.1(Internal Wiring, IS 302-1)	-	0	-
23.4(Internal Wiring, IS 302-1)	-	0	-
23.5(Internal Wiring, IS 302-1)	-	0	-
23.6(Internal Wiring, IS 302-1)	-	0	-
23.7(Internal Wiring, IS 302-1)	-	0	-
23.8(Internal Wiring, IS 302-1)	-	0	-
23.9(Internal Wiring, IS 302-1)	-	0	-
23.1O(Internal Wiring, IS 302-1)	-	0	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.9(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
26(Terminals for External Conductors, IS 302-1)	-	0	-
27.1(Provision for Earthing, IS 302-1)	-	0	-
27.2(Provision for Earthing, IS 302-1)	-	0	-
27.3(Provision for Earthing, IS 302-1)	-	0	-
27.4(Provision for Earthing, IS 302-1)	-	0	-
27.5(Provision for Earthing, IS 302-1)	-	0	-
28(Screws & Connections, IS 302-1)	-	0	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	0	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	0	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	0	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	0	-
31(Resistance of Rusting, IS 302-1)	-	0	-
7.1(Marking- IS 302-2-15)	-	0	-
7.1(Marking- IS 302-2-15)	-	0	-

10 Jul, 2027

-
Included w.e.f.12.12.2024 Exclusion only for rice cooker 24 (COMPONENTS) 32 (RADIATION, TOXICITY AND SIMILAR HAZARDS) 22.16 (Automatic cord reel) 22.32 (Oxygen bomb for rubber material) 22.47 (Water pressure inlet) Annex BB (Appliance for board ships) 19.11.4.1 (Electrostatic discharges) 19.11.4.2 (Radiated fields) 19.11.4.3 (Fast transient bursts) 19.11.4.4 (Surge immunity test) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.7 (Harmonics) 19.11.4.5 (Immunity to conducted discharges)

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number