BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

11247 Results

S.No.

Lab Name

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

8161

Alpha Test House Services LLP

IS 2039 : Part 1 to 3 (1991)

Steel tubes for bicycle and cycle rickshaws - Specification (Second Revision)

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 5.1 Table 1(Carbon)	-	100	BIS 10% discount
Cl. 5.1 Table 1(Silicon)	-	100	BIS 10% discount
Cl. 5.1 Table 1(Manganese)	-	100	BIS 10% discount
Cl. 5.1 Table 1(Phosphorous)	-	100	BIS 10% discount
Cl. 5.1 Table 1(Sulphur)	-	100	BIS 10% discount
Cl. 6.1(Workmanship)	-	200	BIS 10% discount
Cl. 6.2(Fin Height)	-	2000	BIS 10% discount
Cl. 6.3(Straightness)	-	2000	BIS 10% discount
Cl. 8.1(Tensile Strength)	-	1000	BIS 10% discount
Cl. 8.1(Yield Strength)	-	1000	BIS 10% discount
Cl. 8.1(Elongation)	-	500	BIS 10% discount
Cl. 8.2(Drift Expansion Test- IS 2335)	-	1500	BIS 10% discount
Cl. 8.3(Flattening Test-IS 2338)	-	1500	BIS 10% discount
Cl. 4.2.1(Diameter)	-	600	BIS 10% discount
Cl. 4.2.2(Thickness)	-	500	BIS 10% discount
Cl. 3.2.1, Table 4(Yield Stress)	-	500	BIS 10% discount
Cl. 3.2.1, Table 4(UTS)	-	1000	BIS 10% discount
Cl. 3.2.1, Table 4(Elongation)	-	500	BIS 10% discount
Cl. 3.2.2, Table 2(Drift Expansion Test- IS 2335)	-	1500	BIS 10% discount
Cl. 3.2.3, Table 3(Flattening Test-IS 2338)	-	1500	BIS 10% discount
Cl. 4.2.3(Length)	-	500	BIS 10% discount
Cl. 3.1(Carbon)	-	100	BIS 10% discount
Cl. 3.1(Silicon)	-	100	BIS 10% discount
Cl. 3.1(Manganese)	-	100	BIS 10% discount
Cl. 3.1(Phosphorous)	-	100	BIS 10% discount
Cl. 3.1(Sulphur)	-	100	BIS 10% discount
Cl. 4.2.1, Table 7(Yield Stress)	-	1000	BIS 10% discount
Cl. 4.2.1, Table 7(UTS)	-	1000	BIS 10% discount
Cl. 4.2.1, Table 7(Crushing)	-	600	BIS 10% discount
Cl. 4.2.2, Table 8(Drift Expansion Test- IS 2335)	-	1000	BIS 10% discount
Cl. 4.2.3, Table 9(Flattening Test-IS 2338)	-	1500	BIS 10% discount
Cl. 9(Diameter)	-	600	BIS 10% discount
Cl. 5.2.2(Mean Thickness)	-	500	BIS 10% discount
Cl. 5.2.3, Table 6(Length)	-	500	BIS 10% discount

Complete

31 Dec, 2026

-
Included w.e.f. 07.11.2023

8162

Alpha Test House Services LLP

IS 4270 (2001)

Steel tubes used for water wells specification (Third Revision)

11250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6(Tensile Test & Flattening Test)	-	2250	-
Cl 7(Outer Diameter, Thickness, Mass & Straightness)	-	3500	-
Cl 9(Pipe ends, Angle of bevel & Root Face )	-	1500	-
Cl 10(Outer Diameter & Overall Length)	-	700	-
Cl 12(Bituminous Coating & Galvanizing )	-	2000	-
Cl 14(Workmanship)	-	350	-
5.2(phosphorus)	-	300	-
Cl 14(Workmanship)	-	350	-
5.2(sulphur)	-	300	-
Cl 6(Tensile Test & Flattening Test)	-	2250	-
Cl 7(Outer Diameter, Thickness, Mass & Straightness)	-	3500	-
Cl 9(Pipe ends, Angle of bevel & Root Face )	-	1500	-
Cl 10(Outer Diameter & Overall Length)	-	700	-
Cl 12(Bituminous Coating & Galvanizing )	-	2000	-
Cl 14(Workmanship)	-	350	-
Cl 6(Tensile Test & Flattening Test)	-	2250	-
Cl 7(Outer Diameter, Thickness, Mass & Straightness)	-	3500	-
Cl 9(Pipe ends, Angle of bevel & Root Face )	-	1500	-
Cl 10(Outer Diameter & Overall Length)	-	700	-
Cl 12(Bituminous Coating & Galvanizing )	-	2000	-
Cl 14(Workmanship)	-	350	-
11.0(Alignment test IS 4270: 2001)	-	350	-

Complete

31 Dec, 2026

-
Included w.e.f. 07.11.2023

8163

Alpha Test House Services LLP

IS 3589 (2001)

Steel pipes for water and sewage (168.3 To 2540 Mm Outside Diameter) - Specification (Third Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1 Table 2 Table 3(Carbon Content IS 228)	-	100	-
8.1 Table 2 Table 3(Manganese Content IS 228)	-	100	-
8.1 Table 2 Table 3(Phosphorus Content IS 228)	-	100	-
8.1 Table 2 Table 3(Sulphur Content IS 228)	-	100	-
9.3(Guided bend test(For SAW Pipes))	-	500	-
10(Hydaulic pressure test)	-	1000	-
11.1, Table 5.(Outside Diameter (OD))	-	500	-
11.1, Table 5.(Thickness)	-	200	-
11.1, Table 5.(Mass)	-	200	-
12.3.3(Ovality)	-	200	-
12.5(Strightness)	-	1000	-
14.1(Visual inspection, Appearance and Workmanship)	-	200	-
14.4(Visual inspection, Appearance and Workmanship-Dent Depth(below 610 mm OD))	-	200	-
14.4(Visual inspection, Appearance and Workmanship-Dent Length)	-	200	-
8.1(CE)	-	500	-
9.3(Guided Bend Test (for SAW Pipes))	-	500	-
9.2.3(Flattening Test for seamless pipes)	-	500	-
9.2.1(Flattening test for ERW pipes )	-	500	-
9.1(Tensile test-Yield Strength)	-	1400	-
9.1(Tensile test-Strength)	-	1000	-
9.1(Tensile test- Elongation)	-	1000	-
8.1 Table 2 Table 3(Carbon Content IS 228)	-	100	-
8.1 Table 2 Table 3(Manganese Content IS 228)	-	100	-
8.1 Table 2 Table 3(Phosphorus Content IS 228)	-	100	-
8.1 Table 2 Table 3(Sulphur Content IS 228)	-	100	-
9.3(Guided bend test(For SAW Pipes))	-	500	-
10(Hydaulic pressure test)	-	1000	-
11.1, Table 5.(Outside Diameter (OD))	-	500	-
11.1, Table 5.(Thickness)	-	200	-
11.1, Table 5.(Mass)	-	200	-
12.3.3(Ovality)	-	200	-
12.5(Strightness)	-	1000	-
14.1(Visual inspection, Appearance and Workmanship)	-	200	-
14.4(Visual inspection, Appearance and Workmanship-Dent Depth(below 610 mm OD))	-	200	-
14.4(Visual inspection, Appearance and Workmanship-Dent Length)	-	200	-
8.1(CE)	-	500	-
8.1 Table 2 Table 3(Carbon Content IS 228)	-	-	-
8.1 Table 2 Table 3(Manganese Content IS 228)	-	-	-
8.1 Table 2 Table 3(Phosphorus Content IS 228)	-	-	-
8.1 Table 2 Table 3(Sulphur Content IS 228)	-	-	-
9.3(Guided bend test(For SAW Pipes))	-	-	-
10(Hydaulic pressure test)	-	-	-
11.1, Table 5.(Outside Diameter (OD))	-	-	-
11.1, Table 5.(Thickness)	-	-	-
11.1, Table 5.(Mass)	-	-	-
12.3.3(Ovality)	-	-	-
12.5(Strightness)	-	-	-
14.1(Visual inspection, Appearance and Workmanship)	-	-	-
14.4(Visual inspection, Appearance and Workmanship-Dent Depth(below 610 mm OD))	-	-	-
14.4(Visual inspection, Appearance and Workmanship-Dent Length)	-	-	-
8.1(CE)	-	-	-

Complete

31 Dec, 2026

-
Included w.e.f. 07.11.2023

8164

Alpha Test House Services LLP

IS 9523 (2000)

Ductile iron fittings for pressure pipes for water, gas and sewage - Specification (First Revision)

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5(Thickness)	-	500	-
Cl 6 & Table 4,5,6&7(Design & Tolerance)	-	1000	-
Cl 7(Rubber Gasket)	-	1000	-
Cl 9(Tensile Test & Hardness Test)	-	1500	-
Cl 10(Hydrostatic Test)	-	1000	-
Cl 11(Nominal Diameter, Ovality, Dimensions, No. Of Holes & Bolt Sizes)	-	1000	-
Cl 13(Coating)	-	1000	-
Cl 5(Thickness)	-	500	-
Cl 6 & Table 4,5,6&7(Design & Tolerance)	-	1000	-
Cl 7(Rubber Gasket)	-	1000	-
Cl 9(Tensile Test & Hardness Test)	-	1	-
Cl 10(Hydrostatic Test)	-	1000	-
Cl 11(Nominal Diameter, Ovality, Dimensions, No. Of Holes & Bolt Sizes)	-	1000	-
Cl 13(Coating)	-	1000	-

Complete

31 Dec, 2026

-
Included w.e.f. 07.11.2023

8165

Alpha Test House Services LLP

IS 11722 (1986)

Specification for thin walled flexible quick coupling pipes

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Pipe Manufacturing Process )	-	100	10% discount for BIS
5,5.1(Workmsnship &Finish)	-	100	10% discount for BIS
6 &7 ; Table 1(Dimension & Tolerance)	-	200	10% discount for BIS
8(Length)	-	100	10% discount for BIS
9(Galvanizing ,IS 4736)	-	800	10% discount for BIS
10,10.1(Couplers for thin walled coupling pipes ; Appendix A)	-	1000	10% discount for BIS
10,10.2 ,Table 1(Coupler,Type 1B, IS 5382)	-	1000	10% discount for BIS
10,10.3,Table 2(Leakage Test)	-	500	10% discount for BIS
11, Table 3(Angularity of Joint)	-	500	10% discount for BIS
12(Straightness)	-	1000	10% discount for BIS
13.1(Flattening Test,IS 2328)	-	500	10% discount for BIS
13.2(Tensile Test ,; IS 1608(P1))	-	1000	10% discount for BIS
14(Hydraulic Test)	-	900	10% discount for BIS
4.1(Pipe Manufacturing Process )	-	100	10% discount for BIS
5,5.1(Workmsnship &Finish)	-	100	10% discount for BIS
6 &7 ; Table 1(Dimension & Tolerance)	-	100	10% discount for BIS
4.1(Pipe Manufacturing Process )	-	100	-
5,5.1(Workmsnship &Finish)	-	100	-
6 &7 ; Table 1(Dimension & Tolerance)	-	200	-
8(Length)	-	100	-
9(Galvanizing ,IS 4736)	-	800	-
10,10.1(Couplers for thin walled coupling pipes ; Appendix A)	-	1000	-
10,10.2 ,Table 1(Coupler,Type 1B, IS 5382)	-	1000	-
10,10.3,Table 2(Leakage Test)	-	500	-
11, Table 3(Angularity of Joint)	-	500	-
12(Straightness)	-	1000	-
13.1(Flattening Test,IS 2328)	-	500	-
13.2(Tensile Test ,; IS 1608(P1))	-	1000	-
14(Hydraulic Test)	-	900	-
4.1(Pipe Manufacturing Process )	-	100	-
5,5.1(Workmsnship &Finish)	-	100	-
6 &7 ; Table 1(Dimension & Tolerance)	-	200	-

Complete

31 Dec, 2026

-
Included w.e.f. 07.11.2023

8166

Alpha Test House Services LLP

IS 9890 (1981)

Specification for general purpose ball valves

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Nom. size. )	-	1000	-
5(End connections)	-	1000	-
6(Drain Connection)	-	1000	-
7(Joints)	-	1000	-
10(Trim)	-	1000	-
3(Nom. size. )	-	1000	-
5(End connections)	-	1000	-
6(Drain Connection)	-	1000	-
7(Joints)	-	1000	-
10(Trim)	-	1000	-
3(Nom. size. )	-	1000	-
5(End connections)	-	1000	-
6(Drain Connection)	-	1000	-
7(Joints)	-	1000	-
10(Trim)	-	1000	-

Complete

31 Dec, 2026

-
Included w.e.f. 07.11.2023

8167

BIS, Eastern Regional Laboratory (ERL)

IS 5414 (1995)

Gaskets and packings - Gland packing jute and hemp - Specification (First Revision)

Rs.825/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2 (Lubricant Content -A-1 of IS 5414)	-
4.3 (Graphite or Mica Content - A-2 of IS 5414)	-
4.4 (Thickness)	-
4.5 (Weight per metre)	-
5 (Workmanship)	-

Partial

-
Except breaking load test

8168

Allumera Engineering Solutions Pvt ltd

IS 269 (2015)

Ordinary portland cement - Specification (Sixth Revision)

OPC-33gr,OPC-43gr,OPC-43S,OPC-53gr,OPC-53S

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-	6500	GST@ 18.5 percent is applicable to above testing charges.
6.1 Table-2 ii.(Ratio of percentage of alumina to that of iron oxide)	-	2000	-
6.1 Table-2 iii.(Insoluble residue)	-	1500	-
6.1 Table-2 iv(Magnesia)	-	1500	-
6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride)	-	1000	-
6.1 Table-2 vi(Loss on ignition)	-	1500	-
6.1 Table-2 vii(Chloride content)	-	1500	-
6.1 Table-2 viii(Alkali content)	-	2000	-
7 Table-3 i.(Fineness)	-	1000	-
7 Table-3 ii a(Expansion by Le Chatelier)	-	1000	-
7 Table-3 ii b(Expansion by Autoclave)	-	2000	-
7 Table-3 iii a(Setting Time Initial)	-	900	-
7 Table-3 iii b(Setting Time Final)	-	900	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	800	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	900	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1500	-
7 Table-3 v(Transverse Strength - IS 4031 Part 8 (Optional))	-	0	under exclusion
11(Marking)	-	500	visual & obervation remarks

Complete

13 Dec, 2026

-
Exclusion: Cl.7 Table-3 v (Transverse Strength - IS 4031 Part 8 (Optional))

8169

THE SOUTH INDIA TEXTILE RESEARCH ASSOCIATION

IS 17334 (2019)

Medical textiles – Surgical gowns and surgical drapes – Specification

56130 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1 Table 1 (x.)(Resistance to microbial penetration — Wet (IB))	-	14000	-
7.1 Table 1 (ix.)(Resistance to microbial penetration — Dry (CFU))	-	13500	-
7.1 Table 1 (iv.)(Viral resistance)	-	10000	-
7.1 Table 1 (iii.)(Blood resistance)	-	4500	-
7.1 Table 1 (xi.)(Biocompatability evaluation Cytotoxicity, Irritation and skin sensitization)	-	1600	-
7.1, Table 1 (i.)(Impact penetration)	-	600	-
7.1 Table 1 (xii.)(Moisture vapour transmission rate (Max.))	-	3000	-
7.1 Table 1 (v.)(Particle release)	-	3000	-
7.1 Table 1 (ii.)(Hydrostatic resistance (cmwc))	-	550	-
7.1 Table 1 (viii.)(Cleanliness–microbial (CFU/100 cm2))	-	3750	-
7.1 Table 1 (vii.)(bursting strength (dry and wet) (kPa))	-	650	-
7.1 Table 1 (vi.)(tensile strength (dry and wet) (N))	-	980	-

Complete

-
-

8170

Unique Test House

IS 320 (1980)

Specification for high tensile brass rods and sections (Other Than Forging Stock) (Second Revision)

1500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

07 Sep, 2025

-
-

8171

INDIAN TESTING LABORATORY PRIVATE LIMITED

IS 21 (1992)

Wrought aluminium and aluminium alloys for manufacture of utensils specification (Fourth Revision)

19000, 19500, 31000, 31500, 64430

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Tensile Strength)	-	500	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(0.2 Percent Proof Stress)	-	500	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(Tensile Strength)	-	500	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(0.2 Percent Proof Stress)	-	500	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'O')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'O')(Tensile Strength)	-	500	-
4.2, Table 1of IS:21 (Designation 64430)(Aluminium)	-	250	-
4.2, Table 1of IS:21 (Designation 64430)(Lead)	-	250	-
4.2, Table 1of IS:21 (Designation 64430)(Chromium)	-	250	-
4.2, Table 1of IS:21 (Designation 64430)(Titanium and or other grain refining elements)	-	250	-
4.2, Table 1of IS:21 (Designation 64430)(Zinc)	-	250	-
4.2, Table 1of IS:21 (Designation 64430)(Manganese)	-	250	-
4.2, Table 1of IS:21 (Designation 64430)(Iron)	-	250	-
4.2, Table 1of IS:21 (Designation 64430)(Silicon)	-	250	-
4.2, Table 1of IS:21 (Designation 64430)(Magnesium)	-	250	-
4.2, Table 1of IS:21 (Designation 64430)(Copper)	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Tensile Strength)	-	500	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Tensile Strength)	-	500	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Tensile Strength)	-	500	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Tensile Strength)	-	500	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'O')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'O')(Tensile Strength)	-	500	-
4.2, Table 1of IS:21 (Designation 31500)(Aluminium)	-	250	-
4.2, Table 1of IS:21 (Designation 31500)(Titanium and or other grain refining elements)	-	250	-
4.2, Table 1of IS:21 (Designation 31500)(Lead)	-	250	-
4.2, Table 1of IS:21 (Designation 31500)(Zinc)	-	250	-
4.2, Table 1of IS:21 (Designation 31500)(Manganese)	-	250	-
4.2, Table 1of IS:21 (Designation 31500)(Iron)	-	250	-
4.2, Table 1of IS:21 (Designation 31500)(Silicon)	-	250	-
4.2, Table 1of IS:21 (Designation 31500)(Magnesium)	-	250	-
4.2, Table 1of IS:21 (Designation 31500)(Copper)	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Tensile Strength)	-	500	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Tensile Strength)	-	500	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Tensile Strength)	-	500	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Tensile Strength)	-	500	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'O')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'O')(Tensile Strength)	-	500	-
4.2, Table 1of IS:21 (Designation 31000)(Aluminium)	-	250	-
4.2, Table 1of IS:21 (Designation 31000)(Lead)	-	250	-
4.2, Table 1of IS:21 (Designation 31000)(Chromium)	-	250	-
4.2, Table 1of IS:21 (Designation 31000)(Titanium and or other grain refining elements)	-	250	-
4.2, Table 1of IS:21 (Designation 31000)(Zinc)	-	250	-
4.2, Table 1of IS:21 (Designation 31000)(Manganese)	-	250	-
4.2, Table 1of IS:21 (Designation 31000)(Iron)	-	250	-
4.2, Table 1of IS:21 (Designation 31000)(Silicon)	-	250	-
4.2, Table 1of IS:21 (Designation 31000)(Magnesium)	-	250	-
4.2, Table 1of IS:21 (Designation 31000)(Copper)	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Tensile Strength)	-	500	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Tensile Strength)	-	500	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'O')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'O')(Tensile Strength)	-	500	-
4.2, Table 1of IS:21 (Designation 19500)(Aluminium)	-	250	-
4.2, Table 1of IS:21 (Designation 19500)(Cu+Si+Fe+Mn+Zn)	-	1000	-
4.2, Table 1of IS:21 (Designation 19500)(Lead)	-	250	-
4.2, Table 1of IS:21 (Designation 19500)(Zinc)	-	250	-
4.2, Table 1of IS:21 (Designation 19500)(Manganese)	-	250	-
4.2, Table 1of IS:21 (Designation 19500)(Iron)	-	250	-
4.2, Table 1of IS:21 (Designation 19500)(Silicon)	-	250	-
4.2, Table 1of IS:21 (Designation 19500)(Copper)	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Tensile Strength)	-	500	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Tensile Strength)	-	500	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Tensile Strength)	-	500	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Tensile Strength)	-	500	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'O')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'O')(Tensile Strength)	-	500	-
4.2, Table 1of IS:21 (Designation 19000)(Lead)	-	250	-
4.2, Table 1of IS:21 (Designation 19000)(Cu+Mg+Si+Fe+Mn+Zn)	-	1000	-
4.2, Table 1of IS:21 (Designation 19000)(Aluminium)	-	250	-
4.2, Table 1of IS:21 (Designation 19000)(Zinc)	-	250	-
4.2, Table 1of IS:21 (Designation 19000)(Manganese)	-	250	-
4.2, Table 1of IS:21 (Designation 19000)(Iron)	-	250	-
4.2, Table 1of IS:21 (Designation 19000)(Silicon)	-	250	-
4.2, Table 1of IS:21 (Designation 19000)(Magnesium)	-	250	-
4.2, Table 1of IS:21 (Designation 19000)(Copper)	-	250	-
4.1, & 4.1.1(Lead)	-	250	-
4.1.2(Aluminium)	-	250	-

Complete

15 Aug, 2028

-
-

8172

Chem-Tech Laboratories Private Limited

IS 17042 : Part 1 (2020)

Diesel Engines — NOx Reduction Agent AUS 32 Part 1 Quality Requirements ( First Revision )

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5 and table 1(Alkalinity as NH3)	-	450	-
5 and table 1(Urea content)	-	350	-
5 and table 1(Refractive index)	-	500	-
5 and table 1(Biuret)	-	750	-
5 and table 1(Aldehydes)	-	500	-
5 and table 1(Insoluble matter)	-	850	-
5 and table 1(Phosphate (PO4))	-	750	-
5 and table 1(Aluminium)	-	85	-
5 and table 1(Calcium)	-	85	-
5 and table 1(Chromium)	-	85	-
5 and table 1(Copper)	-	85	-
5 and table 1(Iron)	-	85	-
5 and table 1(Potassium)	-	85	-
5 and table 1(Magnesium)	-	85	-
5 and table 1(Sodium)	-	85	-
5 and table 1(Nickel)	-	85	-
5 and table 1(Zinc)	-	85	-

Complete

07 Apr, 2028

-
-

8173

National Test House (NR)

IS 8978 (1992)

Specification for electric instantaneous water heaters (Second Revision)

15000 View breakup
For BIS samples: BIS approved Testng charges. For Others: Rs.15000 (Inclusive of safety testing charges as per IS 302-2-35 @ Rs.5000/-)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.7 of IS 302-2-35:2017(Marking)	-	100	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.6 of IS 302-2-35:2017(Classification)	-	100	-
Cl.6 of IS 302-2-35:2017(Classification)	-	0	-
Cl.8 of IS 302-2-35:2017(Protection Against Access To Live Parts)	-	1000	-
Cl.10 of IS 302-2- 35:2011(Power Input & Current )	-	1000	-
Cl.11 of 302-2-35:2017(Heating)	-	1000	-
Cl.11 of 302-2-35:2017(Heating)	-	0	-
Cl.11 of 302-2-35:2017(Heating)	-	0	-
Cl.11 of 302-2-35:2017(Heating)	-	0	-
Cl.13 of IS 302-2-35:2017(Leakage Current & Electrical Strength at Operating Temperature )	-	500	-
Cl.13 of IS 302-2-35:2017(Leakage Current & Electrical Strength at Operating Temperature )	-	0	-
Cl.14 of IS 302-2-35:2017(Transient Over Voltages )	-	500	-
Cl.15 of IS 302-2-35-2011(Moisture Resistance )	-	100	-
Cl.16 of IS 302-2-35:2011(Leakage Current and Electric Strength)	-	0	-
Cl.16 of IS 302-2-35:2011(Leakage Current and Electric Strength)	-	0	-
Cl.17 IS 302-2-35:2017(Overload Protection of Transformers & Associated circuits )	-	100	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	100	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	0	-
Cl.20 of IS 302-2-35-2011(Stability & Mechanical Hazards )	-	100	-
Cl.21.1 of IS 302-2-35-2011(Mechanical strength)	-	500	-
Cl. 21.2 of IS 302-1:2008(Mechanical strength)	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	400	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	0	-
Cl.24 of IS 302-2-35:2017(Component )	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	300	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	100	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	0	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	500	-
Cl.28 of IS 302-2-35:2017(Screws and Connections )	-	300	-
Cl.29 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation)	-	500	-
Cl.29 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation)	-	0	-
Cl.29 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation)	-	0	-
Cl.30 of IS 302-2-35: 2011(Resistance to Heat and Fire)	-	500	-
Cl.30.1 of IS 302-1:2008(Resistance to Heat and Fire)	-	0	-
Cl.31 of IS 302-2-35: 2011(Resistance to Rusting )	-	500	-
Cl.30.2 of IS 302-1:2008(Resistance to Heat and Fire)	-	0	-
Cl.29.2 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation : Creepage distance )	-	0	-
Cl.29.1 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation : Clearance distance )	-	0	-
Cl.28 of IS 302-2-35:2017(Screws and Connections )	-	0	-
Cl.27.5 of IS 302-2-35:2017(Provision for Earthing : ECR )	-	0	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	0	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	0	-
Cl.25.18 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25.15 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Cord grip test - displacement )	-	0	-
Cl.25.15 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Cord grip test )	-	0	-
Cl.25.12 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Moulding of supply cord )	-	0	-
Cl.25.10 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Colour of Earthing conductor )	-	0	-
Cl.25.8 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Resistance of supply cord )	-	0	-
Cl.25.5 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Type of attachment )	-	0	-
Cl.25.1 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : connection to the supply mains)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.24 of IS 302-2-35:2017(Component )	-	500	-
Cl.23 of IS 302-2-35:2017(Internal Wiring ; Colour of earthing conductor)	-	0	-
Cl.22.110 of IS 302-2-35:2017(Construction : Provision for fixing to wall )	-	500	-
Cl.22.109 of IS 302-2-35:2017(Construction : Operation of presure switch of open outlet water heater )	-	0	-
Cl.22.108 of IS 302-2-35:2017(Construction : Temperature of outlet water intended to supply for showring )	-	0	-
Cl.22.107 of IS 302-2-35:2017(Construction : Temperature of outlet )	-	0	-
Cl.22.106 of IS 302-2-35:2017(Construction : Operation of thermal cut out for closed water heater )	-	0	-
Cl.22.104 of IS 302-2-35:2017(Construction : Pressure in open outlet water heaters )	-	0	-
Cl.22.103 of IS 302-2-35:2017(Construction : Pressure relief device operation for closed water heater )	-	0	-
Cl.22.102 of IS 302-2-35:2017(Construction : excessive temperature of outlet )	-	0	-
Cl.22.101 of IS 302-2-35:2017(Construction : Rated pressure of closed water heater )	-	0	-
Cl.22.47 of IS 302-2-35:2017(Construction : Water pressure test )	-	0	-
Cl.22.44 of IS 302-1:2008(Construction : Shape and decoration )	-	0	-
Cl.22.34, Cl 22.35 of IS 302-1:2008(Construction : Shaft of operating Knobs )	-	0	-
Cl.22.33 of IS 302-1:2008(Construction : Direct contact of liquids )	-	0	-
Cl 22.26 ,Cl.22.28, Cl 22.29, Cl 22.30 , Cl 22.31, Cl 22.32 of IS 302-1:2008(Construction : Supplymentry/ double / reinforced insulation for Class II/ Class III appliance )	-	0	-
Cl.22.18 of IS 302-1:2008(Construction : Resistance to corrosion )	-	0	-
Cl.22.17 of IS 302-1:2008(Construction : Spacers )	-	0	-
Cl.22.14 of IS 302-1:2008(Construction : Ragged or sharp edges )	-	0	-
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knob, grips, levers and similar parts )	-	0	-
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable parts )	-	0	-
Cl.22.7 of IS 302-1:2008(Construction : safeguards against the risk of excessive pressure. )	-	0	-
Cl.22.6 of IS 302-2-35:2017(Construction : size of drain hole )	-	0	-
Cl.22.6 of IS 302-1:2008(Construction : effect of water on 3 insulation )	-	0	-
Cl.22.2 of IS 302-1:2008(Construction : connection to supply mains )	-	0	-
Cl.22.1 of IS 302-1:2008(Construction : IP test )	-	0	-
Cl. 21.2 of IS 302-1:2008(Mechanical strength : prevent penetration by sharp implements. )	-	500	-
Cl.21.1 of IS 302-1:2008(Mechanical strength : Rough handling in normal use)	-	0	-
Cl.20 of IS 302-2-35:2017(Stability & Mechanical Hazards )	-	100	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation : effect on container)	-	100	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation : High voltage)	-	0	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation : Temperature rise of insulation of supply cord)	-	0	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation : Temperature rise of test corner)	-	0	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation : Emission of flames, molten metal ,or poisonous or ignitable gas)	-	0	-
Cl.16 of IS 302-2-35:2017(Leakage Current and Electric Strength (After Humidity))	-	1000	-
Cl.16 of IS 302-2-35:2017(Leakage Current and Electric Strength (After Humidity))	-	0	-
Cl.15 of IS 302-2-35:2017(Moisture Resistance )	-	100	-
Cl.14 of IS 302-2-35:2017(Transient Over Voltages )	-	100	-
Cl.13 of IS 302-2-35:2017(Leakage Current & 3 Strength at Operating Temperature : High voltage )	-	0	-
Cl.11 of 302-2-35:2017(Heating : room temperature)	-	100	-
Cl.11 of 302-2-35:2017(Heating : Insulation of supply cord)	-	0	-
Cl.11 of 302-2-35:2017(Heating : Temperature rise of test corner)	-	0	-
Cl.10 of IS 302-2- 35:2017(Power Input & Current )	-	1000	-
Cl.8 of IS 302-2-35:2017(Protection Against Access To Live Parts)	-	900	-
Cl.7.102 of IS 302-2-35:2017(Marking : Standard mark)	-	100	-
Cl.7.101 of IS 302-2-35:2017(Marking : Woter inlet and outlet idetification)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking : Position of marking)	-	0	-
Cl.7.14 of IS 302-1:2008(Marking ; Legibility and durability)	-	0	-
Cl.7.13 of IS 302-1:2008(Marking : Language)	-	0	-
Cl.7.10 & 7.11 of IS 302-1:2008(Marking : Indication for direction of control)	-	0	-
Cl.7.8 of IS 302-1:2008(Marking : Terminal for connection )	-	0	-
Cl.7.6 of IS 302-1:2008(Marking : Symbols)	-	0	-
Cl.7.1 of IS 302-2-35:2017(Marking : rated pressure)	-	0	-
Cl.7.1 of IS 302-1:2008(Marking : Country of manufacture)	-	0	-
Cl.7.1 of IS 302-1:2008(Marking : IP number )	-	0	-
Cl.7.1 of IS 302-1:2008(Marking : Symbol for class II)	-	0	-
Cl.7.1 of IS 302-1:2008(Marking : Molel or type)	-	0	-
Cl.7.1 of IS 302-1:2008(Marking : Manufacture identification)	-	0	-
Cl.7.1 of IS 302-1:2008(Marking : Rated power input)	-	0	-
Cl.7.1 of IS 302-1:2008(Marking : Nature of supply)	-	0	-
Cl.7.1 of IS 302-1:2008(Marking : Rated Voltage)	-	0	-

Complete

26 Oct, 2025

-
-

8174

BIS, Central Laboratory (CL)

IS 4566 (2020)

Specification For Methylene Chloride ( Dichloromethane ) — Technical ( Second Revision

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.4.1 (Description)	-
Cl.4.2, Table-1(i) (Relative density at 27/27°C)	-
Cl.4.2, Table-1(ii) (Distillation range at a pressure of 1 bar (optional for grade 1))	-
Cl.4.2, Table-1(iii) (Residue on evapouration)	-
Cl.4.2, Table-1(v) (Acidity (as Hcl))	-
Cl.4.2, Table-1(vi) (Free Chlorine)	-
Cl.4.2, Table-1(vii) (Aldehydes)	-
Cl.4.2, Table-1(viii) (Iron (as Fe))	-
Cl.4.2, Table-1(ix) (Heavy metals (as Pb))	-
Cl.4.2, Table-1(x) (Resistance to potassium permanganate)	-
Cl.4.2, Table-1(xi) (Nesslers reagent)	-
Cl.4.2, Table-1(xii) (Resistance to sulphuric acid)	-

Partial

-
-

8175

BIS, Central Laboratory (CL)

IS 5149 (2020)

Specification for Maleic Anhydride, Technical ( Second Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.2.1 (Description)	-
Cl.2.2, Table-1(i) (Crystallizing point)	-
Cl.2.2, Table-1(ii) (Colour of the molten material)	-
Cl.2.2, Table-1(iii) (Maleic acid content)	-
Cl.2.2, Table-1(iv) (Maleic anhydride content)	-
Cl.2.2, Table-1(v) (Ash)	-
Cl.2.2, Table-1(vi) (Iron content (as Fe))	-
Cl.2.1 (Description)	-
Cl.2.2, Table-1(i) (Crystallizing point)	-
Cl.2.2, Table-1(ii) (Colour of the molten material)	-
Cl.2.2, Table-1(iii) (Maleic acid content)	-
Cl.2.2, Table-1(iv) (Maleic anhydride content)	-
Cl.2.2, Table-1(v) (Ash)	-
Cl.2.2, Table-1(vi) (Iron content (as Fe))	-
Cl.2.1 (Description)	-
Cl.2.2, Table-1(i) (Crystallizing point)	-
Cl.2.2, Table-1(ii) (Colour of the molten material)	-
Cl.2.2, Table-1(iii) (Maleic acid content)	-
Cl.2.2, Table-1(iv) (Maleic anhydride content)	-
Cl.2.2, Table-1(v) (Ash)	-
Cl.2.2, Table-1(vi) (Iron content (as Fe))	-
Cl.2.1 (Description)	-
Cl.2.2, Table-1(i) (Crystallizing point)	-
Cl.2.2, Table-1(ii) (Colour of the molten material)	-
Cl.2.2, Table-1(iii) (Maleic acid content)	-
Cl.2.2, Table-1(iv) (Maleic anhydride content)	-
Cl.2.2, Table-1(v) (Ash)	-
Cl.2.2, Table-1(vi) (Iron content (as Fe))	-
Cl.2.1 (Description)	-
Cl.2.2, Table-1(i) (Crystallizing point)	-
Cl.2.2, Table-1(ii) (Colour of the molten material)	-
Cl.2.2, Table-1(iii) (Maleic acid content)	-
Cl.2.2, Table-1(iv) (Maleic anhydride content)	-
Cl.2.2, Table-1(v) (Ash)	-

Partial

-
Test facility is complete for this IS

8176

Alpha Test House Services LLP

IS 277 (2018)

Galvanized steel strips and sheets (Plain And Corrugated) - Specification (Seventh Revision)

5210 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(phosphorus)	-	50	-
5.1(copper)	-	50	-
5.1(nitrogen)	-	700	-
5.1(aluminium)	-	50	-
5.1(manganese)	-	50	-
5.1(sulphur)	-	50	-
5.1(carbon)	-	50	-
5.1(Titanium)	-	50	-
5.1(micro alloy)	-	250	-
7.4(Mass of Coating: Single Spot Test)	-	350	-
7.4(Mass of Coating: Triple Spot Test)	-	350	-
7.1 & 10.2(Mass of Coating: Single Spot Test)	-	350	-
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	350	-
Cl. 17(Marking )	-	150	-
Cl. 14 & Cl. 15 (Cl. 14 & Cl 15 (Pitch of Corrugation))	-	50	-
Cl. 14 & Cl. 15 (Cl. 14 & Cl 15 (Depth of Corrugation))	-	50	-
Cl. 14 & Cl. 15 (Cl. 14 & Cl 15 (Number of Corrugation))	-	50	-
Cl. 14 & Cl. 15 (Cl. 14 & Cl 15 (Difference between Diagonal))	-	50	-
Cl. 14 & Cl. 15 (Cl. 14 & Cl. 15 (Thickness))	-	50	-
Cl. 14 (Cl. 14 & Cl 15 (Width))	-	50	-
Cl. 14 (Cl. 14 & Cl 15 (Length))	-	50	-
Cl.12(Freedom from defects)	-	50	-
Cl. 8.1 (Cl. 8.1 (Percentage Elongation ))	-	100	-
Cl. 8.1 (Cl. 8.1 (Yield Stress))	-	500	-
Cl. 8.1 (Cl. 8.1 (Tensile Strength))	-	500	-
cl 5.1, T-1, Note-6, For reinforced steel(P)	-	50	-
cl 5.1, T-1, Note-5, For Microalloying elements(Nb+V+Ti+B)	-	250	-
cl 5.1, T-1, Note-5, For Microalloying elements(B)	-	250	-
cl 5.1, T-1, Note-5, For Microalloying elements(Ti)	-	250	-
cl 5.1, T-1, Note-5, For Microalloying elements(V)	-	250	-
cl 5.1, T-1, Note-5, For Microalloying elements(Nb)	-	250	-
cl 5.1, T-1, Note-4, For Cu bearing quality(Cu)	-	50	-
cl 5.1, T-1, Note-2, When Al-Si killed(Si)	-	50	-
cl 5.1, T-1, Note-2, When Al-Si killed(Al)	-	50	-
cl 5.1, T-1, Note-3(N2)	-	700	-
cl 5.1, T-1, designation For GP 550(P)	-	50	-
cl 5.1, T-1, designation For GP 550(S)	-	50	-
cl 5.1, T-1, designation For GP 550(Mn)	-	50	-
cl 5.1, T-1, designation For GP 550(C)	-	50	-
cl 5.1, T-1, Note-3(N2)	-	700	-
cl 5.1, T-1, designation For GP 450(P)	-	50	-
cl 5.1, T-1, designation For GP 450(S)	-	50	-
cl 5.1, T-1, designation For GP 450(Mn)	-	50	-
cl 5.1, T-1, designation For GP 450(C)	-	50	-
cl 5.1, T-1, designation For GP 350 class-2(P)	-	50	-
cl 5.1, T-1, designation For GP 350 class-2(S)	-	50	-
cl 5.1, T-1, designation For GP 350 class-2(Mn)	-	50	-
cl 5.1, T-1, designation For GP 350 class-2(C)	-	50	-
cl 5.1, T-1, designation For GP 300(P)	-	50	-
cl 5.1, T-1, designation For GP 350 class-1(P)	-	50	-
cl 5.1, T-1, designation For GP 350 class-1(S)	-	50	-
cl 5.1, T-1, designation For GP 350 class-1(Mn)	-	50	-
cl 5.1, T-1, designation For GP 350 class-1(C)	-	50	-
cl 5.1, T-1, designation For GP 300(S)	-	50	-
cl 5.1, T-1, designation For GP 300(Mn)	-	50	-
cl 5.1, T-1, designation For GP 300(C)	-	50	-
cl 5.1, T-1, designation For GP275(P)	-	50	-
cl 5.1, T-1, designation For GP275(S)	-	50	-
cl 5.1, T-1, designation For GP275(Mn)	-	50	-
cl 5.1, T-1, designation For GP275(C)	-	50	-
cl 5.1, T-1, designation For GP250(P)	-	50	-
cl 5.1, T-1, designation For GP250(S)	-	50	-
cl 5.1, T-1, designation For GP230(Mn)	-	50	-
cl 5.1, T-1, designation For GP230(C)	-	50	-
cl 5.1, T-1, designation For GPIF(P)	-	50	-
cl 5.1, T-1, designation For GPIF(S)	-	50	-
cl 5.1, T-1, designation For GPIF(Mn)	-	50	-
cl 5.1, T-1, designation For GPIF(C)	-	50	-
cl 5.1, T-1, designation For GPED(P)	-	50	-
cl 5.1, T-1, designation For GPED(S)	-	50	-
cl 5.1, T-1, designation For GPED(Mn)	-	50	-
cl 5.1, T-1, designation For GPED(C)	-	50	-
cl 5.1, T-1, designation For GPD(P)	-	50	-
cl 5.1, T-1, designation For GPD(S)	-	50	-
cl 5.1, T-1, designation For GPD(Mn)	-	50	-
cl 5.1, T-1, designation For GPD(C)	-	50	-
cl 5.1, T-1, designation For GPL(P)	-	50	-
cl 5.1, T-1, designation For GPL(S)	-	50	-
cl 5.1, T-1, designation For GPL(Mn)	-	50	-
cl 5.1, T-1, designation For GPL(C)	-	50	-
cl 5.1, T-1, designation For GC(P)	-	50	-
cl 5.1, T-1, designation For GC(S)	-	50	-
cl 5.1, T-1, designation For GC(Mn)	-	50	-
cl 5.1, T-1, designation For GC(C)	-	50	-
cl 5.1, T-1, designation For GPH (P)	-	50	-
cl 5.1, T-1, designation For GPH (S)	-	50	-
cl 5.1, T-1, designation For GPH (Mn)	-	50	-
cl 5.1, T-1, designation For GPH (C)	-	50	-
cl 5.1, T-1, designation For GP (P)	-	50	-
cl 5.1, T-1, designation For GP (S)	-	50	-
cl 5.1, T-1, designation For GP (Mn)	-	50	-
cl 5.1, T-1, designation For GP (C)	-	50	-
Cl.15.1.3.1(Overall width after corrugation)	-	100	-
Cl.15.1.3.1(Overall width before corrugation)	-	100	-
Cl. 9(Surface roughness)	-	500	-
Cl 14(Length, Width & Thickness)	-	100	-
Cl 13(Weight)	-	50	-
Cl 12(Workmanship)	-	150	-
Cl 10(Galvanising Test)	-	350	-
Cl 8.2(Press)	-	500	-
Cl 8.1(UTM)	-	500	-
Cl.15.1.3.1(Overall width after corrugation)	-	50	-
Cl.15.1.3.1(Overall width before corrugation)	-	50	-
Cl. 9(Surface roughness)	-	500	-
Cl 14(Length, Width & Thickness)	-	100	-
Cl 13(Weight)	-	50	-
Cl 12(Workmanship)	-	150	-
Cl 10(Galvanising Test)	-	350	-
Cl 8.2(Press)	-	500	-
Cl 8.1(UTM)	-	500	-
Cl.15.1.3.1(Overall width after corrugation)	-	100	-
Cl.15.1.3.1(Overall width before corrugation)	-	100	-
Cl. 9(Surface roughness)	-	500	-
Cl 14(Length, Width & Thickness)	-	100	-
Cl 13(Weight)	-	50	-
Cl 12(Workmanship)	-	150	-
Cl 10(Galvanising Test)	-	350	-
Cl 8.2(Press)	-	500	-
Cl 8.1(UTM)	-	500	-

Complete

31 Dec, 2026

-
Included w.e.f. 07.11.2023

8177

Alpha Test House Services LLP

IS 8329 (2000)

Centrifugally cast (Spun) ductile iron pressure pipes for water, gas and sewage - Specification (Third Revision)

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 10(Hardness & Tensile Test)	-	3000	10% DISCOUNT TO BIS
Cl 11(Hydrostatic Test)	-	3500	10% DISCOUNT TO BIS
Cl 13(Length, Diameter, Wall Thickness & Ovality)	-	2500	10% DISCOUNT TO BIS
Cl 10(Hardness & Tensile Test)	-	3000	-
Cl 11(Hydrostatic Test)	-	3500	-
Cl 13(Length, Diameter, Wall Thickness & Ovality)	-	2500	-
Cl 10(Hardness & Tensile Test)	-	3000	-

Complete

31 Dec, 2026

-
Included w.e.f. 07.11.2023

8178

Alpha Test House Services LLP

IS 9295 (1983)

Specification for steel tubes for idlers for belt conveyors (First Revision)

7650 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Sulphur- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	500	-
7.1(Phosphorous- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	500	-
8.1.1 Table 1(Tensile Strength- IS 1608(1))	-	500	-
8.1.1 Table 1(Yield Strength- IS 1608)	-	250	-
8.1.1 Table 1(Elongation Percent- IS 1608)	-	250	-
8.2(Drift Expansion Test- IS 2335)	-	500	-
8.3(Flattening Test- IS 2328)	-	550	-
9.1 Table 2(Thickness)	-	500	-
9.1 Table 2(Mass)	-	500	-
10(Hardness)	-	500	-
13.1.1(Ovality)	-	500	-
13.1.2(Eccentricity)	-	500	-
15.1(Straightness)	-	1000	-
16.1(Length)	-	500	-
17.1(Surface Protection)	-	200	-
14.0(Workmanship)	-	200	-
6.2(Fin height)	-	200	-
7.1(Sulphur- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	500	-
7.1(Phosphorous- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	500	-
8.1.1 Table 1(Tensile Strength- IS 1608(1))	-	500	-
8.1.1 Table 1(Yield Strength- IS 1608)	-	250	-
8.1.1 Table 1(Elongation Percent- IS 1608)	-	250	-
8.2(Drift Expansion Test- IS 2335)	-	500	-
8.3(Flattening Test- IS 2328)	-	550	-
9.1 Table 2(Thickness)	-	500	-
9.1 Table 2(Mass)	-	500	-
10(Hardness)	-	500	-
13.1.1(Ovality)	-	500	-
13.1.2(Eccentricity)	-	500	-
15.1(Straightness)	-	1000	-
16.1(Length)	-	500	-
17.1(Surface Protection)	-	200	-
7.1(Sulphur- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	500	-
7.1(Phosphorous- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	500	-
8.1.1 Table 1(Tensile Strength- IS 1608(1))	-	500	-
8.1.1 Table 1(Yield Strength- IS 1608)	-	250	-
8.1.1 Table 1(Elongation Percent- IS 1608)	-	250	-
8.2(Drift Expansion Test- IS 2335)	-	500	-
8.3(Flattening Test- IS 2328)	-	550	-
9.1 Table 2(Thickness)	-	500	-
9.1 Table 2(Mass)	-	500	-
10(Hardness)	-	500	-
13.1.1(Ovality)	-	500	-
13.1.2(Eccentricity)	-	500	-
15.1(Straightness)	-	1000	-
16.1(Length)	-	500	-
17.1(Surface Protection)	-	200	-

Complete

31 Dec, 2026

-
Included w.e.f. 07.11.2023

8179

Alpha Test House Services LLP

IS 7181 (1986)

Specification for horizontally cast iron double flanged pipes for water, gas and sewage (First Revision)

9900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Manufacture)	-	100	-
3.2(Manufacture)	-	100	-
3.3(Manufacture)	-	2000	-
3.4(Manufacture)	-	100	-
3.5(Manufacture)	-	100	-
5.1(Tensile Test)	-	2500	-
6.1(Hydrostatic Test)	-	2000	-
7.1(Sizes and Mass)	-	500	-
7.2(Sizes and Mass)	-	500	-
7.3(Sizes and Mass)	-	500	-
7.4(Sizes and Mass Dimensions of Flange)	-	500	-
8.5(Permissible Deviation from a Straight Line)	-	500	-
9(Coating)	-	500	-
3.1(Manufacture)	-	100	-
3.2(Manufacture)	-	100	-
3.3(Manufacture)	-	2000	-
3.4(Manufacture)	-	100	-
3.5(Manufacture)	-	100	-
5.1(Tensile Test)	-	2500	-
6.1(Hydrostatic Test)	-	2000	-
7.1(Sizes and Mass)	-	500	-
7.2(Sizes and Mass)	-	500	-
7.3(Sizes and Mass)	-	500	-
7.4(Sizes and Mass Dimensions of Flange)	-	500	-
8.5(Permissible Deviation from a Straight Line)	-	500	-
9(Coating)	-	500	-
3.1(Manufacture)	-	100	-
3.2(Manufacture)	-	100	-
3.3(Manufacture)	-	2000	-
3.4(Manufacture)	-	100	-
3.5(Manufacture)	-	100	-
5.1(Tensile Test)	-	2500	-
6.1(Hydrostatic Test)	-	2000	-
7.1(Sizes and Mass)	-	500	-
7.2(Sizes and Mass)	-	500	-
7.3(Sizes and Mass)	-	500	-
7.4(Sizes and Mass Dimensions of Flange)	-	500	-
8.5(Permissible Deviation from a Straight Line)	-	500	-
9(Coating)	-	500	-

Complete

31 Dec, 2026

-
Included w.e.f. 07.11.2023

8180

INDIAN TESTING LABORATORY PRIVATE LIMITED

IS 191 (2007)

Copper - Specification (Fourth Revision)

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1 - Table 4(Copper + Silver(By difference)-IS440)	-	1000	-
7.1 - Table 4(Silver- IS 440)	-	750	-
7.1 - Table 4(Copper (any Silver present to be counted as copper)-IS440)	-	750	-
7.1 - Table 4(Phosphorus- IS 440)	-	750	-
7.1 - Table 4(Arsenic- IS440)	-	750	-
7.1 - Table 4(Antimony-IS440)	-	750	-
7.1 - Table 4(Bismuth-IS 440)	-	750	-
7.1 - Table 4(Iron IS 440)	-	750	-
7.1 - Table 4(Lead IS 440)	-	750	-
7.1 - Table 4(Nickel IS 440)	-	750	-
7.1 - Table 4(Oxygen IS 440)	-	1000	-
7.1 - Table 4(Selenium - IS 440)	-	750	-
7.1 - Table 4(Sulphur- IS 440)	-	500	-
7.1 - Table 4(Tellurium- IS 440)	-	750	-
7.1 - Table 4(Tin - IS 440)	-	750	-
7.1 - Table 4(Znic-IS 440)	-	500	-
7.1 - Table 4(Selenium + Telluuium- IS 440)	-	500	-
7.1 - Table 4(Total Impurities- IS 440)	-	500	-
8.1(FREEDOM FROM DEFECTS)	-	200	-
8.2(FREEDOM FROM DEFECTS)	-	200	-
5.1- Table 2(L)	-	100	-
5.1- Table 2(L1)	-	100	-
5.1- Table 2(h)	-	100	-
5.1- Table 2(h1)	-	100	-
5.1- Table 2(b)	-	100	-
5.1- Table 2(b1)	-	100	-
5.1- Table 2(R)	-	100	-
5.1- Table 2(R1)	-	100	-
5.1- Table 2(R2 )	-	100	-
5.1- Table 2(α )	-	100	-
5.1- Table 2( β )	-	100	-
5.1- Table 2(γ)	-	100	-
5.2(Billets)	-	100	-
5.4-Table 3 (For Billets)(Mass)	-	100	-
5.2-Table 3 (For Billets)(Diameter)	-	100	-
5.2-Table 3 (For Billets)(Length)	-	100	-
5.2-Table 3 (For Billets)(Deviation from straightness per 1000 mm length)	-	100	-
5.4-Table 3 (Vertically continuously cast wire bars)(Mass)	-	100	-
5.3-Table 3 (Vertically continuously cast wire bars)(Width)	-	100	-
5.3-Table 3 (Vertically continuously cast wire bars)(thickness )	-	100	-
5.3-Table 3 (Vertically continuously cast wire bars)(Other dimention)	-	100	-
5.4-Table 3 (Ingots)(Mass)	-	100	-
5.4-Table 3 (Cast cakes)(Mass)	-	100	-
5.3-Table 3 (Cast cakes)(Width)	-	100	-
5.3-Table 3 (Cast cakes)(thickness )	-	100	-
5.3-Table 3 (Cast cakes)(Deviation from straightness per 1000 mm length)	-	100	-

Complete

15 Aug, 2028

-
Amendment No. 2 Included w.e.f. 22.03.2023.

8181

Alpha Test House Services LLP

IS 13095 (2020)

Butterfly Valves for General Purposes ( First Revision )

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0(VALVE END CONNECTIONS)	-	50	-
6.0( NOMINAL SIZES )	-	50	-
7.0(NOMINAL PRESSURES)	-	50	-
7.2(Class designations)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Flange-D)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges-IS 6418 (Table 2/3/6/7/10)- Flange-b)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges-IS 6418 (Table 2/3/6/7/10)- Rasied Face-d4)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges-IS 6418 (Table 2/3/6/7/10)- Rasied Face-f)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Bolting )	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Drilling -Nos. )	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Drilling -d2)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Drilling -k)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Neck -d3)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Neck- r)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Flange-D)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Flange-b)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Rasied Face-d4)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Rasied Face-f)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Bolting)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Drilling -Nos. )	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Drilling -d2 )	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Drilling -k)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Neck -d3)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Neck-r)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Pipe O.D.- d1)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Flange - D)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Flange - b)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Raised Face - d4)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Raised Face - f)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Bolting)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Drilling - Nos.)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Drilling -d2)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Drilling -k)	-	50	-
9.1.1 ( Double Flanged Body Ends)	-	50	-
9.2.2(Wafer Body Ends)	-	200	-
10.1 -Table1 (FACE TO FACE DIMENSIONS)	-	200	-
11.0(Bodies)	-	200	-
12.0(DISC AND SHAFT)	-	200	-
13.0(SEATING AND LININGS)	-	200	-
14.0(BEARINGS)	-	200	-
14.2(BEARINGS)	-	200	-
14.3(BEARINGS)	-	200	-
16.0(OPERATION)	-	500	-
17.1(Performance Testing)	-	1000	-
17.2(Body Test)	-	1000	-
17.3(Seat Test)	-	300	-
17.4(Disc Strength Test)	-	300	-
Cl. 15 Table 2(Materials)	-	1500	-
5.0(SERVICE APPLICATIONS)	-	100	-
Cl. 15 Table 2(Materials)	-	1500	-

Complete

31 Dec, 2026

-
Included w.e.f. 07.11.2023

8182

Alpha Test House Services LLP

IS 15647 (2006)

Hot rolled steel narrow width strip for welded tubes and pipes

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(UTM)	-	1000	10% DISCOUNT TO BIS
Cl 9(Press)	-	2000	10% DISCOUNT TO BIS
Cl 11(Workmanship)	-	100	-
Cl 12(Length, Width & Thickness)	-	2000	10% DISCOUNT TO BIS
Cl. 8.2 Table 3(Elongation)	-	1000	10% DISCOUNT TO BIS
Cl. 8.2 Table 3(Yield Stress)	-	1000	10% DISCOUNT TO BIS
7(Chemical Composition)	-	2500	10% DISCOUNT TO BIS
Cl 8(UTM)	-	1000	-
Cl 9(Press)	-	2000	-
Cl 11(Workmanship)	-	100	-
Cl 12(Length, Width & Thickness)	-	2000	-
Cl. 8.2 Table 3(Elongation)	-	1000	-
Cl. 8.2 Table 3(Yield Stress)	-	1000	-
7(Chemical Composition)	-	2500	-
Cl 13(Workmanship)	-	300	-

Complete

31 Dec, 2026

-
Included w.e.f. 07.11.2023

8183

Alpha Test House Services LLP

IS 6603 (2001)

Stainless steel bars and flats - Specification (First Revision)

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Carbon -Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	200	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Silicon- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	200	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Manganese- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	200	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Nickel -Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	200	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Chromium- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	200	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Molybdenum- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	200	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Titanium- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	100	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Niobium- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	100	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Sulphur- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	100	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Phosphorus- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	100	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Others (Nitrogen)- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	400	-
Cl.14.1(Corrosion Resistance- IS 10461(Part1))	-	1000	-
Cl.14.1(Corrosion Resistance- IS 10461(Part2))	-	900	-
6(Freedom from defects:)	-	100	-
9.1, Table 3(0.2 Percent Proof Stress, MPa)	-	500	-
9.2, Table 3(Tensile Strength, MPa)	-	500	-
9.3, Table 3(Elongation ,Percent)	-	500	-
9.4, Table 3(Annealed Hardness, HB-IS 1500: Pt 1)	-	1000	-
9.5, Table 3(Charpy Impact Test, J-IS 1499)	-	3000	-
12(Diameter, mm)	-	200	-
12(Out of Round , mm)	-	200	-
12(Length , mm)	-	200	-
12(Variation in Straightness)	-	200	-
12(Dimensions & Tolerances, mm-IS 6603)	-	200	-
Cl. 9.3 Table 3(Bend Test)	-	500	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Carbon -Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	200	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Silicon- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	200	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Manganese- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	200	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Nickel -Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	200	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Chromium- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	200	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Molybdenum- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	200	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Titanium- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	100	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Niobium- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	100	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Sulphur- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	100	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Phosphorus- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	100	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Others (Nitrogen)- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	400	-
Cl.14.1(Corrosion Resistance- IS 10461(Part1))	-	1000	-
Cl.14.1(Corrosion Resistance- IS 10461(Part2))	-	900	-
6(Freedom from defects:)	-	100	-
9.1, Table 3(0.2 Percent Proof Stress, MPa)	-	500	-
9.2, Table 3(Tensile Strength, MPa)	-	500	-
9.3, Table 3(Elongation ,Percent)	-	500	-
9.4, Table 3(Annealed Hardness, HB-IS 1500: Pt 1)	-	1000	-
9.5, Table 3(Charpy Impact Test, J-IS 1499)	-	3000	-
12(Diameter, mm)	-	200	-
12(Out of Round , mm)	-	200	-
12(Length , mm)	-	200	-
12(Variation in Straightness)	-	200	-
12(Dimensions & Tolerances, mm-IS 6603)	-	200	-
Cl. 9.3 Table 3(Bend Test)	-	500	-

Complete

31 Dec, 2026

-
Included w.e.f. 07.11.2023

8184

Alpha Test House Services LLP

IS 6528 (1995)

Stainless steel wire - Specification (First Revision)

15375 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6(Workmanship)	-	100	15% DISCOUNT TO BIS
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Nitrogen)	-	500	15% DISCOUNT TO BIS
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Titanium)	-	200	15% DISCOUNT TO BIS
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Vanadium)	-	200	15% DISCOUNT TO BIS
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Boron)	-	200	15% DISCOUNT TO BIS
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Copper)	-	200	15% DISCOUNT TO BIS
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Molybdenum)	-	200	15% DISCOUNT TO BIS
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Nickel)	-	200	15% DISCOUNT TO BIS
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Chromium)	-	200	15% DISCOUNT TO BIS
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Aluminium)	-	200	15% DISCOUNT TO BIS
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Silicon)	-	200	15% DISCOUNT TO BIS
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Manganese)	-	200	15% DISCOUNT TO BIS
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Phosphorous)	-	200	15% DISCOUNT TO BIS
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Sulphor)	-	200	15% DISCOUNT TO BIS
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Carbon)	-	200	15% DISCOUNT TO BIS
Cl 10(UTM)	-	9375	15% DISCOUNT TO BIS
Cl 9.1 & Table 3(Diameter & Out Of Round)	-	500	15% DISCOUNT TO BIS
Cl 6(Workmanship)	-	100	15% DISCOUNT TO BIS
Cl 10(UTM)	-	9375	15% DISCOUNT TO BIS
Cl 9.1 & Table 3(Diameter & Out Of Round)	-	500	15% DISCOUNT TO BIS
Cl 6(Workmanship)	-	100	15% DISCOUNT TO BIS
Cl 10(UTM)	-	9375	15% DISCOUNT TO BIS
Cl 9.1 & Table 3(Diameter & Out Of Round)	-	500	15% DISCOUNT TO BIS
10.2(Reverse bend test-IS 1716)	-	800	15% DISCOUNT TO BIS
10.3(Torsion test- IS 1717)	-	800	15% DISCOUNT TO BIS
10.4(Wrapping test-IS 1755)	-	900	15% DISCOUNT TO BIS
Table 7(Workmanship)	-	100	15% DISCOUNT TO BIS
Cl 6(Workmanship)	-	100	15% DISCOUNT TO BIS
Cl 10(UTM)	-	9375	15% DISCOUNT TO BIS
Cl 9.1 & Table 3(Diameter & Out Of Round)	-	500	15% DISCOUNT TO BIS
10.2(Reverse bend test-IS 1716)	-	800	15% DISCOUNT TO BIS
10.3(Torsion test- IS 1717)	-	800	15% DISCOUNT TO BIS
10.4(Wrapping test-IS 1755)	-	900	15% DISCOUNT TO BIS
Table 7(Workmanship)	-	100	15% DISCOUNT TO BIS

Complete

31 Dec, 2026

-
Included w.e.f. 07.11.2023

8185

INDIAN TESTING LABORATORY PRIVATE LIMITED

IS 1660 (2009)

Wrought aluminium utensils - Specification (First Revision)

GROUP- I, II, III, IV, V

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Classification Heavy/Medium/L:ight)	-	250	-
4(Material)	-	1500	-
5.1(The utensil shall be pressed or spun from one piece)	-	250	-
5.2( Body Thickness of the thinnest part of the finished utensil, mm Not declared )	-	250	-
5.2(Lid Thickness of the finished utensil, mm)	-	250	-
6.1 & Table 1( i) Name of Utensil )	-	250	-
6.1 & Table 1(ii) Shape of Utensil)	-	250	-
6.1 & Table 1( Nominal Size, mm)	-	250	-
6.1 & Table 1(Inside dia, Φ D mm Not declared )	-	250	-
6.1 & Table 1(Outside dia Ф NA)	-	250	-
6.1 & Table 1(Height NA)	-	250	-
6.1 & Table 1(Capacity, l NA)	-	500	-
6.1( Minimum sheet thickness for nominal size )	-	500	-
7.1(HANDLES ,When fitted shall be of aluminium, stainless steel or of other suitable fire resistance material These shall be fastened to the utensils by tightly drawn aluminium or stainless steel rivets, by welding, by screwing to cast bosses or by riveting between flange at the end of the handles. Handles shall be so shaped and positioned to facilitate the carrying and handling of the utensils in normal use )	-	1000	-
7.2(Handles shall be sufficiently strong to support a mass in the utensils equivalent to three times the mass of the water capacity of the utensils in the position of normal use without visible permanent deformation of the handle or utensil)	-	1000	-
8.1(The utensils shall be clean reasonably free from distortion, dents, wrinkles, wavy surface, burrs, scratches, pitting and deep tool marks and other surface defects)	-	250	-
8.2(The design of the utensils shall be such that it is easy to clean and prevent accumulation of dirt)	-	250	-
8.4.1.2( Finish of the coating: The coating shall be smooth continuous and uniform in appearance, and shall be adherent. It shall be free from powdery areas, loose films and discontinuities, such as breaks and scratches. The size and number of contact marks shall be minimum consistent with good practice.)	-	250	-
8.4.2(A coating of thickness 25 to 100 microns is generally required)	-	250	-
8.4.3(Abrasion Resistance When the coating surface is rubbed two or three times with emery paper with emery conforming to grit number 180 using medium finger pressure, it shall not abrade the surface but shall skid over the surface showing not more than a trace of whitening of the surface)	-	500	-
8.4.4(The colour of the hard anodic coating varies depending upon the alloy, thickness of the coating and electrolye. Normally the colour may vary from dark grey (almost black) to light grey. )	-	500	-
8.4.5 (When the coated surface is rubbed two or three times with fine emery paper grit number 180 using medium finger pressure, cloth or paper shall not abrade the surface. A faint trace of whitening on the cloth or paper is permissible)	-	500	-
9(The manufacturer shall provide full instructions for use and cleaning for coated or hard anodized utensils)	-	500	-
10(Each vessel shall be legibly and indelibly stamped on the outside surface or handle with the manufacturer’s name or registered trade-mark, size and thickness or class. )	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Nitrogen of IS 6911)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Titanium of IS 6911)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Vanadium of IS 6911)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Boron of IS 6911)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Copper of IS 6911)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Molybdenum of IS 6911)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Nickel of IS 6911)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Chromium of IS 6911)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Aluminium of IS 6911)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Silicon of IS 6911)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Manganese of IS 6911)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Phosphorous of IS 6911)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Sulphor of IS 6911)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Carbon of IS 6911)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Titanium of IS 737)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Chromium of IS 737)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Zinc of IS 737)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Manganese of IS 737)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Iron of IS 737)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Silicon of IS 737)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Magnesium of IS 737)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Copper of IS 737)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Aluminium of IS 737)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Titanium / other Grain of IS 21)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Chromium of IS 21)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Zinc of IS 21)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Manganese of IS 21)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Iron of IS 21)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Silicon of IS 21)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Magnesium of IS 21)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Copper of IS 21)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Aluminium of IS 21)	-	500	-
Clause 3.1.3, Table 2(Minimum Thickness at the bottom)	-	500	-
Clause 3.1.3, Table 2(Minimum Thickness of wall at top edge)	-	250	-
Clause 3.1.3, Table 2(Minimum Cover Thickness)	-	250	-
Clause 8.6.1(Performance test)	-	1000	-
Clause 8.6.2(Ground Nut Oil Test for Leakage)	-	500	-
0.5(Fabrication)	-	250	-
5.4(Qualitative and Anodized Coating)	-	250	-
5.5(Qualitative and Anodized Coating)	-	250	-
8.3(Anodized Coating)	-	250	-
8.5(Plastic Coating)	-	250	-

Complete

15 Aug, 2028

-
-

8186

INDIAN TESTING LABORATORY PRIVATE LIMITED

IS 2347 (2017)

Domestic pressure cooker - Specification (Sixth Revision)

GROUP I, II & III

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.6.2(Tests for Removal of Lid under Pressure For inner Lid Cooker)	-	750	-
8.6.1(Tests for Removal of Lid under Pressure For Outer Lid Cooker)	-	750	-
8.5(Bursting Pressure Test)	-	1000	-
8.4(Test for Safety Pressure Relief Device)	-	750	-
8.3(Operating Test for Pressure Regulating Device)	-	750	-
8.2(Proof Pressure Test)	-	750	-
8.1(Air Pressure Test)	-	750	-
7.4(WORKMANSHIP AND FINISH)	-	250	-
7.3(WORKMANSHIP AND FINISH)	-	250	-
7.2(WORKMANSHIP AND FINISH)	-	250	-
7.1(WORKMANSHIP AND FINISH)	-	250	-
6.4.1.1(Handles and Knobs)	-	4500	-
6.4.1(Handles and Knobs)	-	2500	-
6.3.1(Temperature Responsive Pressure Relief Device)	-	750	-
6.2.2(Safety Relief Device)	-	750	-
6.2.1(Safety Relief Device)	-	750	-
6.1.5(Pressure Regulating Device)	-	750	-
6.1.4(Pressure Regulating Device)	-	750	-
6.1.3(Pressure Regulating Device)	-	750	-
6.1.2(Pressure Regulating Device)	-	750	-
6.1.1(Pressure Regulating Device)	-	750	-
6(CONSTRUCTION)	-	250	-
5.7(Vent Pipe)	-	250	-
5.6(Vent Seal Pin for Pressure Regulating Device)	-	500	-
5.5(Pressure Regulating Device)	-	750	-
5.2(Safety Relief Device)	-	750	-
4.1(Capacity)	-	500	-
8.14(3 Ply Construction Cooker Body)	-	1500	-
8.12(Internal Coating)	-	1000	-
8.11(External Coating )	-	1000	-
8.10 NOTES (3)(Handles of the cooker - Proof Pressure)	-	250	-
8.10 NOTES (4)(Handles of the cooker)	-	2500	-
8.10 NOTES (5)(Handles of the cooker)	-	250	-
8.10 NOTES (6)(Handles of the cooker)	-	500	-
8.10 (a)(Handles of the cooker- Resistance to Burning)	-	250	-
8.10 (b)(Handles of the cooker- Heat Resistance)	-	1500	-
8.10 (c)(Handles of the cooker- Torque Strength)	-	1500	-
8.10 (d)(Handles of the cooker- Bending Strength)	-	1500	-
8.10 (e)(Handles of the cooker- Fatigue Resistance)	-	1500	-
8.10 (f)(Handles of the cooker- Thermal Insualtion Test)	-	1500	-
8.4 Annex H-1.1(Test for SPRD - For Destructible Devices )	-	1000	-
8.4 Annex H-1.2(Test for SPRD - For Resettable Devices )	-	1000	-
5.8(Vent Pipe Nut)	-	1000	-
5.1.1(Body, Lid, Containers and Grid)	-	1000	-
5.1.2(Body, Lid, Containers and Grid)	-	1000	-
5.1.3(Body, Lid, Containers and Grid)	-	1000	-
5.1.4(Body, Lid, Containers and Grid)	-	1000	-
5.3(Gasket)	-	1500	-
5.4(Handles and Knobs)	-	1000	-

Complete

15 Aug, 2028

-
for all grades except "for pressure cooker operated by spring loaded mechanism test"

8187

INDIAN TESTING LABORATORY PRIVATE LIMITED

IS 740 (1977)

Specification for wrought aluminium and aluminium alloy rivet stock for general engineering purposes (Second Revision)

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1, Table 1of IS:740 (Designation & Condition 65032, 'W')(Tensile Strength of Size upto and including 25 mm)	-	1000	-
4.1, Table 1of IS:740 (Designation & Condition 64430, 'W')(Tensile Strength of Size upto and including 25 mm)	-	1000	-
4.1, Table 1of IS:740 (Designation & Condition 55000, 'OD')(Tensile Strength of Size upto and including 25 mm)	-	1000	-
4.1, Table 1of IS:740 (Designation & Condition 55000, 'O or M')(Tensile Strength of Size upto and including 25 mm)	-	1000	-
4.1, Table 1of IS:740 (Designation & Condition 53000, 'OD')(Tensile Strength of Size upto and including 25 mm)	-	1000	-
4.1, Table 1of IS:740 (Designation & Condition 53000, 'O or M')(Tensile Strength of Size upto and including 25 mm)	-	1000	-
4.1, Table 1of IS:740 (Designation & Condition 24345, 'W')(Tensile Strength of Size upto and including 12 mm)	-	1000	-
4.1, Table 1of IS:740 (Designation & Condition 19000, '112')(Tensile Strength of Size upto and including 12 mm)	-	1000	-
4.1, Table 1of IS:740 (Designation 65032)(Aluminium)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Either Cr or Mn shall present)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Chromium)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Titanium and or other grain refining elements)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Zinc)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Manganese)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Iron)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Silicon)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Magnesium)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Copper)	-	500	-
4.1, Table 1of IS:740 (Designation 64430)(Aluminium)	-	500	-
4.1, Table 1of IS:740 (Designation 64430)(Cr+Mn)	-	500	-
4.1, Table 1of IS:740 (Designation 64430)(Chromium)	-	500	-
4.1, Table 1of IS:740 (Designation 64430)(Titanium and or other grain refining elements)	-	500	-
4.1, Table 1of IS:740 (Designation 64430)(Zinc)	-	500	-
4.1, Table 1of IS:740 (Designation 64430)(Manganese)	-	500	-
4.1, Table 1of IS:740 (Designation 64430)(Copper)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Aluminium)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Cr+Mn)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Chromium)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Titanium and or other grain refining elements)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Zinc)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Manganese)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Iron)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Silicon)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Magnesium)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Copper)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Aluminium)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Cr+Mn)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Chromium)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Titanium and or other grain refining elements)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Zinc)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Manganese)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Iron)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Silicon)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Magnesium)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Copper)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Aluminium)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Chromium)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Titanium and or other grain refining elements)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Zinc)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Manganese)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Iron)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Silicon)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Magnesium)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Copper)	-	500	-
4.1, Table 1of IS:740 (Designation 19000)(Cu+Mg+Si+Fe+Mn+Zn)	-	500	-
4.1, Table 1of IS:740 (Designation 19000)(Aluminium)	-	500	-
4.1, Table 1of IS:740 (Designation 19000)(Zinc)	-	500	-
4.1, Table 1of IS:740 (Designation 19000)(Manganese)	-	500	-
4.1, Table 1of IS:740 (Designation 19000)(Iron)	-	500	-
4.1, Table 1of IS:740 (Designation 19000)(Silicon)	-	500	-
4.1, Table 1of IS:740 (Designation 19000)(Magnesium)	-	500	-
4.1, Table 1of IS:740 (Designation 19000)(Copper)	-	500	-
6(Freedom From Defects)	-	250	-
7(Dmension And Tolerances)	-	250	-
9.2(Head Forming Test)	-	250	-
11(Marking)	-	250	-

Complete

15 Aug, 2028

-
-

8188

INDIAN TESTING LABORATORY PRIVATE LIMITED

IS 13395 (2021)

Performance of Handles and Handle Assemblies Attached to Cookware - Specification ( First Revision )

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(General)	-	500	-
5.2(Bending Strength)	-	2500	-
5.3(Torque Strength)	-	2500	-
5.4(Impact Strength)	-	2000	-
5.5(Fatigue Resistance)	-	2000	-
5.6(Leakage)	-	2000	-
5.7(Thermal Insulation)	-	1500	-
5.8(Heat Resistance)	-	2500	-
5.9(Washing Resistance)	-	2000	-
5.1(Burning Resistance)	-	1500	-
5.1(General)	-	500	-
5.2(Bending strength)	-	2500	-
5.3(Torque strength)	-	2500	-
5.4(Impact strength)	-	2000	-
5.5(Fatigue resistance)	-	2000	-
5.6(Leakage)	-	2000	-
5.7(Thermal insulation)	-	1500	-
5.8(Heat resistance)	-	2500	-
5.9(Washing resistance)	-	2000	-
5.10(Burning resistance)	-	1500	-
4.1(Construction)	-	250	-
4.2(Materials)	-	250	-
4.3(Selection and Size)	-	250	-
4.4(Position of handle and knob with respect to cookware)	-	250	-
4.5(Attachment to cookware)	-	250	-

Complete

15 Aug, 2028

-
-

8189

INDIAN TESTING LABORATORY PRIVATE LIMITED

IS 7466 (1994)

Rubber gaskets for pressure cookers - Specifications (First Revison)

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Workmanship and Finish )	-	500	-
3.4-Table 1(i)(Requirements of Rubber Used for Gaskets-Hardness IRHD)	-	1000	-
3.4-Table 1(ii)(Requirements of Rubber Used for Gaskets-Tensile strength,)	-	1500	-
3.4-Table 1(iii)(Requirements of Rubber Used for Gaskets-Elongation at break)	-	1000	-
3.4-Table 1(iv-a)(Requirements of Rubber Used for Gaskets-Hardness IRHD(After ageing 3 days in Aie-oven Change From Original Value))	-	2500	-
3.4-Table 1(iv-b)(Requirements of Rubber Used for Gaskets-Tensile strength(After ageing 3 days in Aie-oven Change From Original Value))	-	2500	-
3.4-Table 1(iv-c)(Requirements of Rubber Used for Gaskets-Elongation at break(After ageing 3 days in Aie-oven Change From Original Value))	-	1500	-
3.4-Table 1(v-a)(Requirements of Rubber Used for Gaskets-Hardness IRHD(After ageing in an autoclave Change From Original Value))	-	500	-
3.4-Table 1(v-b)(Requirements of Rubber Used for Gaskets-Tensile strength(After ageing in an autoclave Change From Original Value))	-	1500	-
3.4-Table 1(v-c)(Requirements of Rubber Used for Gaskets-Elongation at break(After ageing in an autoclave Change From Original Value))	-	1000	-
3.4-Table 1(vi)(Compression set)	-	2000	-
3.5-ANNEX C(PERFORMANCE TEST FOR PRESSURE COOKER )	-	2500	-
Clause 4.3 Table 1(Zinc oxide)	-	1500	-
Clause 3.4 Table 1(Heavy metal content)	-	1500	-
3.4. and Table 1 v) d(Requirements of Rubber Used for Gaskets-Volume(After ageing in an autoclave Change From Original Value))	-	1500	-
4.2(Marking)	-	250	-

Complete

15 Aug, 2028

-
-

8190

INDIAN TESTING LABORATORY PRIVATE LIMITED

IS 6911 (2017)

Stainless steel plate, sheet and strip - Specification (Second Revision)

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.1 & 7.2 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Molybdenum -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Copper -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Others-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Titanium-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Niobium-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl.12(Corrosion Resistance- IS 10461(Part1))	-	1000	-
6(Freedom from defects , IS 6911)	-	250	-
10.1,Table 4&Table 6(Tensile Test - IS 1608(Pt -1))	-	1000	-
10.2,Table 4&Table 5(Hardness Test- IS 1500(Pt -1),IS 1501 (Pt-1),IS 1586 (Pt -1))	-	750	-
10.3(Bend Test - IS 1599)	-	500	-
11,Table 7(Erichsen cupping test-IS 10175)	-	750	-
15(Surface Finish)	-	250	-
10.1 Amd 2(Yeild Strength)	-	500	-
10.1 Amd 2(0.2 Percent Proof Stress)	-	500	-
10.1 Amd 2(Elongation)	-	500	-
Clause 17 , Table 9 to Table 19(Dimension (Length))	-	500	-
Clause 17 , Table 9 to Table 19(Dimension (Width))	-	500	-
Clause 17 , Table 9 to Table 19(Dimension (Thickness))	-	500	-
Clause 17 , Table 9 to Table 19(Flatness)	-	300	-
Clause 17 , Table 9 to Table 19(Camber)	-	300	-
4(Supply of Material)	-	250	-
8(Heat Treatment)	-	250	-
19(Marking)	-	250	-

Complete

15 Aug, 2028

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number

No Record Found