BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15471 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

8191

ACCURATE TEST SOLUTIONS LLP (F21), NOIDA

8141226

IS 2993 : Part 1 (2024)

a.c. Motor Capacitors Part 1 General - Performance, Testing and Rating - Safety Requirements - Guidance for Installation and Operation ( Third Revision )

425000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(General)	-	1000	5% discount for BIS
5.5(Tangent of loss angle)	-	4000	5% discount for BIS
5.7("Voltage test between terminals ")	-	10000	5% discount for BIS
5.8(Voltage test between terminals and case)	-	6000	5% discount for BIS
5.9(Capacitance measurement)	-	25000	5% discount for BIS
5.9(Capacitance measurement)	-	25000	5% discount for BIS
5.1(Check of dimensions)	-	6000	5% discount for BIS
5.11(Mechanical tests)	-	25000	5% discount for BIS
5.12(Sealing test)	-	15000	5% discount for BIS
5.13(Endurance test)	-	100000	5% discount for BIS Class A: 100000 Class B: 90000 Class C: 75000 Class D: 55000
5.14(Damp heat test)	-	50000	5% discount for BIS
5.15(Self-healing test)	-	75000	5% discount for BIS
5.16(Destruction test)	-	80000	5% discount for BIS
5.17(Resistance to heat, fire and tracking)	-	9000	5% discount for BIS
5.17.1(Ball-pressure test)	-	3000	5% discount for BIS
5.17.2(Glow-wire test)	-	3000	5% discount for BIS
5.17.3(Tracking test)	-	3000	5% discount for BIS
6.1(Maximum permissible voltage)	-	1000	5% discount for BIS
6.2("Maximum permissible current ")	-	1000	5% discount for BIS
6.3(Maximum permissible reactive output)	-	1000	5% discount for BIS
7(Safety requirements)	-	10000	5% discount for BIS
7.1(Requirements for Creepage distances and clearances)	-	2000	5% discount for BIS
7.2(Terminals and connecting cables)	-	6000	5% discount for BIS
7.3(Earth connections)	-	1000	5% discount for BIS
7.4(Discharge devices)	-	1000	5% discount for BIS
8(Marking)	-	1000	5% discount for BIS
9.2.1(Measurements of working voltage)	-	1000	5% discount for BIS
9.2.2(Influence of capacitance)	-	1000	5% discount for BIS
9.3(Checking capacitor temperature)	-	1000	5% discount for BIS
9.4(Checking transients)	-	1000	5% discount for BIS
9.5(Leakage current)	-	1000	5% discount for BIS

04 Jul, 2027

-
Included.w.e.f.05.11.2024

8192

Sleen India Biz venture Private Limited, Agra

9139736

IS 17630 (2021)

Medical Textiles Bedsheet and Pillow Cover Specification

Medical Textile

21000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(WORKMANSHIP AND FINISH)	-	200	-
6(GENERAL REQUIREMENTS - Fabric Washing & Tumble Drying)	-	300	-
6- Table 1- i)(GENERAL REQUIREMENTS - Colour fastness to rubbing a) Dry 4 or better b) Wet)	-	500	-
6- Table 1- ii)(GENERAL REQUIREMENTS - Colour fastness to perspiration (acidic and alkaline) a) Colour change b) Staining)	-	1000	-
6- Table 1- iii)(GENERAL REQUIREMENTS - Colour fastness to washing a) Colour change b) Staining)	-	1000	-
6- Table 1- iv)(GENERAL REQUIREMENTS - Colour fastness to light Color change)	-	500	-
6- Table 1- v)(GENERAL REQUIREMENTS - Dimensional stability to washing, percentage Length and width)	-	500	-
6- Table 1- vi)(GENERAL REQUIREMENTS - Pilling resistance)	-	500	-
6- Table 1- vii)(GENERAL REQUIREMENTS - Scouring loss, percent, Max (for cotton))	-	1000	-
7.1- Table 2- i)(PERFORMANCE REQUIREMENTS - Tensile strength (dry and wet) (N))	-	500	-
7.1- Table 2- ii)(PERFORMANCE REQUIREMENTS - Bursting strength (dry and wet) (kPa))	-	500	-
7.1- Table 2- iii)(PERFORMANCE REQUIREMENTS - Seam strength (dry and wet) (N))	-	500	-
7.1- Table 2- iv)(PERFORMANCE REQUIREMENTS - pH)	-	1000	-
7.1- Table 2- v)(PERFORMANCE REQUIREMENTS - Water soluble substance, percent)	-	1000	-
7.1- Table 2- vi)(PERFORMANCE REQUIREMENTS - Cleanliness–microbial (CFU/100 cm2))	-	2000	-
7.1- Table 2- vii)(PERFORMANCE REQUIREMENTS - Particle release [log10 (lint count)])	-	4000	-
7.1- Table 2- ix)(PERFORMANCE REQUIREMENTS - Moisture vapour transmission rate (Max))	-	0	This clause is under exclusion.
7.2(The performance requirements of reusable products shall have to be met after declared wash and sterilization cycle)	-	500	-
8.2(PACKAGING of Products STERILIZATION of Products)	-	500	-
9(MARKING)	-	500	-
5(WORKMANSHIP AND FINISH)	-	0	Repeated Clause.
6(GENERAL REQUIREMENTS - Fabric Washing & Tumble Drying)	-	0	Repeated Clause.
6- Table 1- i)(GENERAL REQUIREMENTS - Colour fastness to rubbing a) Dry 4 or better b) Wet)	-	0	Repeated Clause.
6- Table 1- ii)(GENERAL REQUIREMENTS - Colour fastness to perspiration (acidic and alkaline) a) Colour change b) Staining)	-	0	Repeated Clause.
6- Table 1- iii)(GENERAL REQUIREMENTS - Colour fastness to washing a) Colour change b) Staining)	-	0	Repeated Clause.
6- Table 1- iv)(GENERAL REQUIREMENTS - Colour fastness to light Color change)	-	0	Repeated Clause.
6- Table 1- v)(GENERAL REQUIREMENTS - Dimensional stability to washing, percentage Length and width)	-	0	Repeated Clause.
6- Table 1- vi)(GENERAL REQUIREMENTS - Pilling resistance)	-	0	Repeated Clause.
6- Table 1- vii)(GENERAL REQUIREMENTS - Scouring loss, percent, Max (for cotton))	-	0	Repeated Clause.
7.1- Table 2- i)(PERFORMANCE REQUIREMENTS - Tensile strength (dry and wet) (N))	-	0	Repeated Clause.
7.1- Table 2- ii)(PERFORMANCE REQUIREMENTS - Bursting strength (dry and wet) (kPa))	-	0	Repeated Clause.
7.1- Table 2- iii)(PERFORMANCE REQUIREMENTS - Seam strength (dry and wet) (N))	-	0	Repeated Clause.
7.1- Table 2- iv)(PERFORMANCE REQUIREMENTS - pH)	-	0	Repeated Clause.
7.1- Table 2- v)(PERFORMANCE REQUIREMENTS - Water soluble substance, percent)	-	0	Repeated Clause.
7.1- Table 2- vi)(PERFORMANCE REQUIREMENTS - Cleanliness–microbial (CFU/100 cm2))	-	0	Repeated Clause.
7.1- Table 2- vii)(PERFORMANCE REQUIREMENTS - Particle release [log10 (lint count)])	-	0	Repeated Clause.
7.1- Table 2- ix)(PERFORMANCE REQUIREMENTS - Moisture vapour transmission rate (Max))	-	0	Repeated Clause.
7.2(The performance requirements of reusable products shall have to be met after declared wash and sterilization cycle)	-	0	Repeated Clause.
8.2(PACKAGING of Products STERILIZATION of Products)	-	0	Repeated Clause.
9(MARKING)	-	0	Repeated Clause.
5(WORKMANSHIP AND FINISH)	-	0	Repeated Clause.
6(GENERAL REQUIREMENTS - Fabric Washing & Tumble Drying)	-	0	Repeated Clause.
6- Table 1- i)(GENERAL REQUIREMENTS - Colour fastness to rubbing a) Dry 4 or better b) Wet)	-	0	Repeated Clause.
6- Table 1- ii)(GENERAL REQUIREMENTS - Colour fastness to perspiration (acidic and alkaline) a) Colour change b) Staining)	-	0	Repeated Clause.
6- Table 1- iii)(GENERAL REQUIREMENTS - Colour fastness to washing a) Colour change b) Staining)	-	0	Repeated Clause.
6- Table 1- iv)(GENERAL REQUIREMENTS - Colour fastness to light Color change)	-	0	Repeated Clause.
6- Table 1- v)(GENERAL REQUIREMENTS - Dimensional stability to washing, percentage Length and width)	-	0	Repeated Clause.
6- Table 1- vi)(GENERAL REQUIREMENTS - Pilling resistance)	-	0	Repeated Clause.
6- Table 1- vii)(GENERAL REQUIREMENTS - Scouring loss, percent, Max (for cotton))	-	0	Repeated Clause.
7.1- Table 2- i)(PERFORMANCE REQUIREMENTS - Tensile strength (dry and wet) (N))	-	0	Repeated Clause.
7.1- Table 2- ii)(PERFORMANCE REQUIREMENTS - Bursting strength (dry and wet) (kPa))	-	0	Repeated Clause.
7.1- Table 2- iii)(PERFORMANCE REQUIREMENTS - Seam strength (dry and wet) (N))	-	0	Repeated Clause.
7.1- Table 2- iv)(PERFORMANCE REQUIREMENTS - pH)	-	0	Repeated Clause.
7.1- Table 2- v)(PERFORMANCE REQUIREMENTS - Water soluble substance, percent)	-	0	Repeated Clause.
7.1- Table 2- vi)(PERFORMANCE REQUIREMENTS - Cleanliness–microbial (CFU/100 cm2))	-	0	Repeated Clause.
7.1- Table 2- vii)(PERFORMANCE REQUIREMENTS - Particle release [log10 (lint count)])	-	0	Repeated Clause.
7.1- Table 2- ix)(PERFORMANCE REQUIREMENTS - Moisture vapour transmission rate (Max))	-	0	Repeated Clause.
7.2(The performance requirements of reusable products shall have to be met after declared wash and sterilization cycle)	-	0	Repeated Clause.
8.2(PACKAGING of Products STERILIZATION of Products)	-	0	Repeated Clause.
9(MARKING)	-	0	Repeated Clause.
5(WORKMANSHIP AND FINISH)	-	0	Repeated Clause.
6(GENERAL REQUIREMENTS - Fabric Washing & Tumble Drying)	-	0	Repeated Clause.
6- Table 1- i)(GENERAL REQUIREMENTS - Colour fastness to rubbing a) Dry 4 or better b) Wet)	-	0	Repeated Clause.
6- Table 1- ii)(GENERAL REQUIREMENTS - Colour fastness to perspiration (acidic and alkaline) a) Colour change b) Staining)	-	0	Repeated Clause.
6- Table 1- iii)(GENERAL REQUIREMENTS - Colour fastness to washing a) Colour change b) Staining)	-	0	Repeated Clause.
6- Table 1- iv)(GENERAL REQUIREMENTS - Colour fastness to light Color change)	-	0	Repeated Clause.
6- Table 1- v)(GENERAL REQUIREMENTS - Dimensional stability to washing, percentage Length and width)	-	0	Repeated Clause.
6- Table 1- vi)(GENERAL REQUIREMENTS - Pilling resistance)	-	0	Repeated Clause.
6- Table 1- vii)(GENERAL REQUIREMENTS - Scouring loss, percent, Max (for cotton))	-	0	Repeated Clause.
7.1- Table 2- i)(PERFORMANCE REQUIREMENTS - Tensile strength (dry and wet) (N))	-	0	Repeated Clause.
7.1- Table 2- ii)(PERFORMANCE REQUIREMENTS - Bursting strength (dry and wet) (kPa))	-	0	Repeated Clause.
7.1- Table 2- iii)(PERFORMANCE REQUIREMENTS - Seam strength (dry and wet) (N))	-	0	Repeated Clause.
7.1- Table 2- iv)(PERFORMANCE REQUIREMENTS - pH)	-	0	Repeated Clause.
7.1- Table 2- v)(PERFORMANCE REQUIREMENTS - Water soluble substance, percent)	-	0	Repeated Clause.
7.1- Table 2- vi)(PERFORMANCE REQUIREMENTS - Cleanliness–microbial (CFU/100 cm2))	-	0	Repeated Clause.
7.1- Table 2- vii)(PERFORMANCE REQUIREMENTS - Particle release [log10 (lint count)])	-	0	Repeated Clause.
7.1- Table 2- ix)(PERFORMANCE REQUIREMENTS - Moisture vapour transmission rate (Max))	-	0	Repeated Clause.
7.2(The performance requirements of reusable products shall have to be met after declared wash and sterilization cycle)	-	0	Repeated Clause.
8.2(PACKAGING of Products STERILIZATION of Products)	-	0	Repeated Clause.
9(MARKING)	-	0	Repeated Clause.

-
Included w.e.f.19.05.2025 Exclusion 7.1- Table 2- viii) (PERFORMANCE REQUIREMENTS - Biocompatibility Evaluation a) Cytotoxicity b) Irritation and skin sensitization) 7.1- Table 2- ix) (PERFORMANCE REQUIREMENTS - Moisture vapour transmission rate (Max))

8193

Sleen India Biz venture Private Limited, Agra

9139736

IS 17349 (2020)

Medical textiles – Shoe covers – Specification

Medical Textile

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Workmanship and finish)	-	500	-
5.2 - Table 1 - (i)(Cleanliness - Microbial)	-	3500	-
5.2 - Table 1 - (ii)(Tensile Strength)	-	500	-
5.2 - Table 1 - (iii)(Bursting Strength)	-	500	-
6(Packing)	-	500	-
7(Marking)	-	500	-
5(Requirements)	-	0	Repeated clause.
5.1(Workmanship and Finish)	-	0	Repeated clause.
5.2- Table 1- i)(Cleanliness – Microbial)	-	0	Repeated clause.
5.2- Table 1- ii)(Tensile strength)	-	0	Repeated clause.
5.2- Table 1- iii)(Bursting strength)	-	0	Repeated clause.
6(Packing)	-	0	Repeated clause.
7(Marking)	-	0	Repeated clause.
5.1(Workmanship and finish)	-	0	Repeated clause.
5.2 - Table 1 - (i)(Cleanliness - Microbial)	-	0	Repeated clause.
5.2 - Table 1 - (ii)(Tensile Strength)	-	0	Repeated clause.
5.2 - Table 1 - (iii)(Bursting Strength)	-	0	Repeated clause.
6(Packing)	-	0	Repeated clause.
7(Marking)	-	0	Repeated clause.
5(Requirements)	-	0	Repeated clause.
5.1(Workmanship and Finish)	-	0	Repeated clause.
5.2- Table 1- i)(Cleanliness – Microbial)	-	0	Repeated clause.
5.2- Table 1- ii)(Tensile strength)	-	0	Repeated clause.
5.2- Table 1- iii)(Bursting strength)	-	0	Repeated clause.
6(Packing)	-	0	Repeated clause.
7(Marking)	-	0	Repeated clause.
5.1(Workmanship and finish)	-	0	Repeated clause.
5.2 - Table 1 - (i)(Cleanliness - Microbial)	-	0	Repeated clause.
5.2 - Table 1 - (ii)(Tensile Strength)	-	0	Repeated clause.
5.2 - Table 1 - (iii)(Bursting Strength)	-	0	Repeated clause.
6(Packing)	-	0	Repeated clause.
7(Marking)	-	0	Repeated clause.
5(Requirements)	-	0	Repeated clause.
5.1(Workmanship and Finish)	-	0	Repeated clause.
5.2- Table 1- i)(Cleanliness – Microbial)	-	0	Repeated clause.
5.2- Table 1- ii)(Tensile strength)	-	0	Repeated clause.
5.2- Table 1- iii)(Bursting strength)	-	0	Repeated clause.
6(Packing)	-	0	Repeated clause.
7(Marking)	-	0	Repeated clause.

-
Included w.e.f 03.03.2025

8194

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 4509 (1992)

Ring slugging wrenches (Spanners) - specification (First Revision)

ring slugging wrenches

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Dimensions- s)	-	10000	-
3(Dimensions- a)	-	10000	-
3(Dimensions- b)	-	10000	-
3(Dimensions- l)	-	10000	-
5(Hardness)	-	10000	-
6(Workmanship and Finish)	-	10000	-
7(PRESERVATION AND PACKING)	-	10000	-
9(Designation)	-	10000	-
4(Chemical Test)	-	10000	-

31 Dec, 2026

-
Included w.e.f.12.11.2024

8195

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 4508 (1992)

Open ended slugging wrenches (Spanners) - specification (First Revision)

open ended slugging wrenches

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Dimensions- s)	-	10000	-
3(Dimensions- a)	-	10000	-
3(Dimensions- b)	-	10000	-
3(Dimensions- l)	-	10000	-
5(Hardness)	-	10000	-
6(Workmanship and Finish)	-	10000	-
7(PRESERVATION AND PACKING)	-	10000	-
9(Designation)	-	10000	-

31 Dec, 2026

-
included w.e.f.12.11.2024

8196

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 4123 (1982)

Specification for chain pipe wrenches (First Revision)

chain pipe wrenches

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3 Table 1(Dimensions- Nominal Size)	-	15000	-
3 Table 1(Dimensions- Capacity, D min)	-	15000	-
3 Table 1(Dimensions- Capacity, D max)	-	15000	-
3 Table 1(Dimensions- Length , L)	-	15000	-
3 Table 1(Dimensions- Length of Jaw, L1)	-	15000	-
3 Table 1(Dimensions- Width of Jaw, E)	-	15000	-
3 Table 1(Dimensions- Dia of Handle, d)	-	15000	-
3 Table 1(Dimensions- Thickness of Jaw, T)	-	15000	-
3 Table 1(Dimensions- Length of Chain)	-	15000	-
3 Table 1(Dimensions- Chain Pitch, P)	-	15000	-
5(Hardness- Jaws)	-	15000	-
6(Construction)	-	15000	-
6(Construction)	-	15000	-
6.1(Construction- Handel)	-	15000	-
6.2(Construction- Jaws)	-	15000	-
6.3(Construction- Chain)	-	15000	-
7.1(Workmanship and Finish )	-	15000	-
7.2(Workmanship and Finish )	-	15000	-
7.2(Workmanship and Finish )	-	15000	-
9(Test)	-	15000	-

31 Dec, 2026

-
Included w.e.f.12.11.2024

8197

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 6149 (1984)

Specification for single - Ended open - Jaw adjustable wrenches (First Revision)

Single - Ended open - Jaw adjustable wrenches

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2(Type)	-	15000	-
3(Grades)	-	15000	-
4 Table-1(Dimensions- Nominal Size)	-	15000	-
4 Table-1(Dimensions- l)	-	15000	-
4 Table-1(Dimensions- s)	-	15000	-
4 Table-1(Dimensions- a)	-	15000	-
4 Table-1(Dimensions- b)	-	15000	-
4 Table-1(Dimensions- t)	-	15000	-
4 Table-1(Dimensions- d)	-	15000	-
4 Table-1(Dimensions- Opening of adjustable jaws)	-	15000	-
6(Hardness- Frame, handle and Jaw)	-	15000	-
6(Hardness- Worm)	-	15000	-
6(Hardness- Worm pin)	-	15000	-
7(Manufacture,Workmanship & Finish)	-	15000	-
7(Manufacture,Workmanship & Finish)	-	15000	-
7(Manufacture,Workmanship & Finish)	-	15000	-
7(Manufacture,Workmanship & Finish)	-	15000	-
7(Manufacture,Workmanship & Finish)	-	15000	-
8(Longitudinal Play of Adjustable Jaw)	-	15000	-
8(Transverse Play of Adjustable Jaw)	-	15000	-
8(Torque)	-	15000	-
5(Chemical Composition)	-	15000	-

31 Dec, 2026

-
Included w.e.f.12.11.2024

8198

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 2029 (1998)

Ring wrenches (Spanners) - Specification (Fourth Revision)

ring wrenches

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3, Table-1(Dimensions- s1)	-	14000	-
3, Table-1(Dimensions- s2)	-	14000	-
3, Table-1(Dimensions- a)	-	14000	-
3, Table-1(Dimensions- b1)	-	14000	-
3, Table-1(Dimensions- b2)	-	14000	-
3, Table-1(Dimensions- L)	-	14000	-
5(Hardness)	-	14000	-
6(Workmanship and Finish)	-	14000	-
6(Workmanship and Finish)	-	14000	-
6(Torque Testing)	-	14000	-
7(Designation)	-	14000	-
Cl.4(CARBON)	-	14000	-
Cl.4(SULPHUR)	-	14000	-
Cl.4(PHOSPHURS)	-	14000	-
Cl.4(MANGANESE)	-	14000	-
Cl.4(NITROGEN)	-	14000	-
Cl.4(SILICON)	-	14000	-
Cl.4(CHROMIUM)	-	14000	-
Cl.4(NICKEL)	-	14000	-
Cl.4(VANADIUM)	-	14000	-
Cl.4(MOLYBDENUM)	-	14000	-
Cl 4(Carbon- IS 228(Part 1))	-	14000	-
Cl 4(Sulphur- IS 228(Part 9))	-	14000	-
Cl 4(Phosphorous- IS 228(Part 3))	-	14000	-
Cl 4(Manganese- IS 228(Part 2))	-	14000	-
Cl 4(Silicon- IS 228(Part 2))	-	14000	-
Cl.4(ALUMINIUM)	-	14000	-

31 Dec, 2026

-
Included w.e.f.12.11.2024

8199

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 2028 (2004)

Open jaw wrenches (Spanners) - Specification (Fijih Revision)

open jaw wrenches

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Dimensions- a)	-	14000	-
3.1(Dimensions- b)	-	14000	-
3.1(Dimensions- l)	-	14000	-
3.2, 3.3, 3.4(Dimensions- a)	-	14000	-
3.2, 3.3, 3.4(Dimensions- b1)	-	14000	-
3.2, 3.3, 3.4(Dimensions- b2)	-	14000	-
3.2, 3.3, 3.4(Dimensions- l)	-	14000	-
5(Hardness- upto 32 mm)	-	14000	-
5(Hardness- over 32 mm)	-	14000	-
6(Workmanship And Finish)	-	14000	-
6(Workmanship And Finish)	-	14000	-
6(Workmanship And Finish)	-	14000	-
8(Tourque test)	-	14000	-
4(Chemical Composition)	-	14000	-

31 Dec, 2026

-
Included w.e.f.12.11.2024

8200

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 3898 (2024)

Zineb technical - Specification Second Revision

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Description)	-	500	-
3.2, 7.1 Table - 1 (i)(Zineb Content)	-	4000	-
3.2, 7.1 Table - 1 (ii)(Zinc content)	-	2500	-
3.2, 7.1 Table - 1 (iii)(Moisture Content)	-	1500	-
3.1(Description)	-	-	-
3.2, 7.1 Table - 1 (i)(Zineb Content)	-	-	-
3.2, 7.1 Table - 1 (ii)(Zinc content)	-	-	-
3.2, 7.1 Table - 1 (iii)(Moisture Content)	-	-	-

31 Dec, 2026

-
Included w.e.f.10.12.2024

8201

FARE Labs Pvt. Ltd. (8166516), Gurugram

8166516

IS 14543 (2024)

Packaged Drinking Water Other than Packaged Natural Mineral Water Specification Third Revision

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-5.3, Table-4 (i)(Alpha emitters, Becquerel (Bq/l))	-	3250		30% Discount for BIS Samples
Cl-5.3, Table-4 (ii)(Beta emitters, Becquerel (Bq/l),)	-	3250		30% Discount for BIS Samples

25 Nov, 2026

-
Included w.e.f. 20.11.2024 For Alpha Emitters and Beta Emitters only.

8202

Sleen India Biz venture Private Limited, Agra

9139736

IS 17509 (2021)

Disposable Baby Diaper Specification

Medical Textile

21200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause no. 3(Material)	-	200	-
Clause no. 3.1(Top Cover / Top Sheet)	-	250	-
Clause no. 3.2(Absorbent Core)	-	500	-
Clause no. 3.3(Outer Protective Barrier or Back Sheet)	-	500	-
Clause no. 4(Fastening & Securing Mechanism)	-	500	-
Clause no. 5(ManufactureWorkmanship and Finish)	-	250	-
Clause no.6(Type and Size: FOR X LARGE)	-	500	Combined test price for cl. 6 is 500/-.
Clause no.6(Diaper Length)	-	0	Combined test price for cl. 6 is 500/-.
Clause no.6(Diaper Width)	-	0	Combined test price for cl. 6 is 500/-.
Clause no.6(Diaper Crotch)	-	0	Combined test price for cl. 6 is 500/-.
Clause no.6(Absorbent Core Length)	-	0	Combined test price for cl. 6 is 500/-.
Clause no.6(Absorbent Core Width Back)	-	0	Combined test price for cl. 6 is 500/-.
1()	-	0	Combined test price for cl. 6 is 500/-.
Clause no.6(Absorbent Core Length)	-	0	Combined test price for cl. 6 is 500/-.
Clause no.6(Absorbent Core Width Front)	-	0	Combined test price for cl. 6 is 500/-.
Clause no.6(Core Cortch)	-	0	Combined test price for cl. 6 is 500/-.
Clause no.7(Performance Requirements)	-	500	-
Clause no.7.1(pH Value)	-	1000	-
Clause no.7.2 Table-2(Minimum absorption Capacity (X Large))	-	1000	-
Clause no.7.2 Table-2(Rewet under Load (All Sizes))	-	500	-
Clause no.7.2 Table-2(Rate of Absorption (All Sizes))	-	1000	-
Clause no.7.3(Hygiene Testing Requirement, Total Viable Count)	-	4300	-
Clause no.7.3(Hygiene Testing Requirement, Staphylococcus Aureus)	-	2200	-
Clause no.7.5(Phthalate Test)	-	4000	-
Clause no.7.7(Anti-Bacterial Activity Value (optional))	-	0	This test facility is not available.
9 & 9.1(Marking)	-	250	-
10(Packing)	-	250	-
CL 7.3(Total Viable Count)	-	4300	Repeated Clause.
CL 7.3(Staphylococcus aureus)	-	2200	Repeated Clause.
CL 7.7(Anti-Bacterial Activity Value (Optional))	-	0	This test facility is not available.
Clause no. 3(Material)	-	0	Repeated Clause.
Clause no. 3.1(Top Cover / Top Sheet)	-	0	Repeated Clause.
Clause no. 3.2(Absorbent Core)	-	0	Repeated Clause.
Clause no. 3.3(Outer Protective Barrier or Back Sheet)	-	0	Repeated Clause.
Clause no. 4(Fastening & Securing Mechanism)	-	0	Repeated Clause.
Clause no. 5(ManufactureWorkmanship and Finish)	-	0	Repeated Clause.
Clause no.6(Type and Size: FOR X LARGE)	-	0	Repeated Clause.
Clause no.6(Diaper Length)	-	0	Repeated Clause.
Clause no.6(Diaper Width)	-	0	Repeated Clause.
Clause no.6(Diaper Crotch)	-	0	Repeated Clause.
Clause no.6(Absorbent Core Length)	-	0	Repeated Clause.
Clause no.6(Absorbent Core Width Back)	-	0	Repeated Clause.
1()	-	0	Repeated Clause.
Clause no.6(Absorbent Core Length)	-	0	Repeated Clause.
Clause no.6(Absorbent Core Width Front)	-	0	Repeated Clause.
Clause no.6(Core Cortch)	-	0	Repeated Clause.
Clause no.7(Performance Requirements)	-	0	Repeated Clause.
Clause no.7.1(pH Value)	-	0	Repeated Clause.
Clause no.7.2 Table-2(Minimum absorption Capacity (X Large))	-	0	Repeated Clause.
Clause no.7.2 Table-2(Rewet under Load (All Sizes))	-	0	Repeated Clause.
Clause no.7.2 Table-2(Rate of Absorption (All Sizes))	-	0	Repeated Clause.
Clause no.7.3(Hygiene Testing Requirement, Total Viable Count)	-	0	Repeated Clause.
Clause no.7.3(Hygiene Testing Requirement, Staphylococcus Aureus)	-	0	Repeated Clause.
Clause no.7.5(Phthalate Test)	-	0	Repeated Clause.
Clause no.7.7(Anti-Bacterial Activity Value (optional))	-	0	This test facility is not available.
9 & 9.1(Marking)	-	0	Repeated Clause.
10(Packing)	-	0	Repeated Clause.
CL 7.3(Total Viable Count)	-	0	Repeated Clause.
CL 7.3(Staphylococcus aureus)	-	0	Repeated Clause.
CL 7.7(Anti-Bacterial Activity Value (Optional))	-	0	This test facility is not available.
Clause no. 3(Material)	-	0	Repeated Clause.
Clause no. 3.1(Top Cover / Top Sheet)	-	0	Repeated Clause.
Clause no. 3.2(Absorbent Core)	-	0	Repeated Clause.
Clause no. 3.3(Outer Protective Barrier or Back Sheet)	-	0	Repeated Clause.
Clause no. 4(Fastening & Securing Mechanism)	-	0	Repeated Clause.
Clause no. 5(ManufactureWorkmanship and Finish)	-	0	Repeated Clause.
Clause no.6(Type and Size: FOR X LARGE)	-	0	Repeated Clause.
Clause no.6(Diaper Length)	-	0	Repeated Clause.
Clause no.6(Diaper Width)	-	0	Repeated Clause.
Clause no.6(Diaper Crotch)	-	0	Repeated Clause.
Clause no.6(Absorbent Core Length)	-	0	Repeated Clause.
Clause no.6(Absorbent Core Width Back)	-	0	Repeated Clause.
1()	-	0	Repeated Clause.
Clause no.6(Absorbent Core Length)	-	0	Repeated Clause.
Clause no.6(Absorbent Core Width Front)	-	0	Repeated Clause.
Clause no.6(Core Cortch)	-	0	Repeated Clause.
Clause no.7(Performance Requirements)	-	0	Repeated Clause.
Clause no.7.1(pH Value)	-	0	Repeated Clause.
Clause no.7.2 Table-2(Minimum absorption Capacity (X Large))	-	0	Repeated Clause.
Clause no.7.2 Table-2(Rewet under Load (All Sizes))	-	0	Repeated Clause.
Clause no.7.2 Table-2(Rate of Absorption (All Sizes))	-	0	Repeated Clause.
Clause no.7.3(Hygiene Testing Requirement, Total Viable Count)	-	0	Repeated Clause.
Clause no.7.3(Hygiene Testing Requirement, Staphylococcus Aureus)	-	0	Repeated Clause.
Clause no.7.5(Phthalate Test)	-	0	Repeated Clause.
Clause no.7.7(Anti-Bacterial Activity Value (optional))	-	0	This test facility is not available.
9 & 9.1(Marking)	-	0	Repeated Clause.
10(Packing)	-	0	Repeated Clause.
CL 7.3(Total Viable Count)	-	0	Repeated Clause.
CL 7.3(Staphylococcus aureus)	-	0	Repeated Clause.
CL 7.7(Anti-Bacterial Activity Value (Optional))	-	0	This test facility is not available.
Clause no. 3(Material)	-	0	Repeated Clause.
Clause no. 3.1(Top Cover / Top Sheet)	-	0	Repeated Clause.
Clause no. 3.2(Absorbent Core)	-	0	Repeated Clause.
Clause no. 3.3(Outer Protective Barrier or Back Sheet)	-	0	Repeated Clause.
Clause no. 4(Fastening & Securing Mechanism)	-	0	Repeated Clause.
Clause no. 5(ManufactureWorkmanship and Finish)	-	0	Repeated Clause.
Clause no.6(Type and Size: FOR X LARGE)	-	0	Repeated Clause.
Clause no.6(Diaper Length)	-	0	Repeated Clause.
Clause no.6(Diaper Width)	-	0	Repeated Clause.
Clause no.6(Diaper Crotch)	-	0	Repeated Clause.
Clause no.6(Absorbent Core Length)	-	0	Repeated Clause.
Clause no.6(Absorbent Core Width Back)	-	0	Repeated Clause.
1()	-	0	Repeated Clause.
Clause no.6(Absorbent Core Length)	-	0	Repeated Clause.
Clause no.6(Absorbent Core Width Front)	-	0	Repeated Clause.
Clause no.6(Core Cortch)	-	0	Repeated Clause.
Clause no.7(Performance Requirements)	-	0	Repeated Clause.
Clause no.7.1(pH Value)	-	0	Repeated Clause.
Clause no.7.2 Table-2(Minimum absorption Capacity (X Large))	-	0	Repeated Clause.
Clause no.7.2 Table-2(Rewet under Load (All Sizes))	-	0	Repeated Clause.
Clause no.7.2 Table-2(Rate of Absorption (All Sizes))	-	0	Repeated Clause.
Clause no.7.3(Hygiene Testing Requirement, Total Viable Count)	-	0	Repeated Clause.
Clause no.7.3(Hygiene Testing Requirement, Staphylococcus Aureus)	-	0	Repeated Clause.
Clause no.7.5(Phthalate Test)	-	0	Repeated Clause.
9 & 9.1(Marking)	-	0	Repeated Clause.
10(Packing)	-	0	Repeated Clause.
CL 7.3(Total Viable Count)	-	0	Repeated Clause.
CL 7.3(Staphylococcus aureus)	-	0	Repeated Clause.
Clause no. 3(Material)	-	0	Repeated Clause.
Clause no. 3.1(Top Cover / Top Sheet)	-	0	Repeated Clause.
Clause no. 3.2(Absorbent Core)	-	0	Repeated Clause.
Clause no. 3.3(Outer Protective Barrier or Back Sheet)	-	0	Repeated Clause.
Clause no. 4(Fastening & Securing Mechanism)	-	0	Repeated Clause.
Clause no. 5(ManufactureWorkmanship and Finish)	-	0	Repeated Clause.
Clause no.6(Type and Size: FOR X LARGE)	-	0	Repeated Clause.
Clause no.6(Diaper Length)	-	0	Repeated Clause.
Clause no.6(Diaper Width)	-	0	Repeated Clause.
Clause no.6(Diaper Crotch)	-	0	Repeated Clause.
Clause no.6(Absorbent Core Length)	-	0	Repeated Clause.
Clause no.6(Absorbent Core Width Back)	-	0	Repeated Clause.
1()	-	0	Repeated Clause.
Clause no.6(Absorbent Core Length)	-	0	Repeated Clause.
Clause no.6(Absorbent Core Width Front)	-	0	Repeated Clause.
Clause no.6(Core Cortch)	-	0	Repeated Clause.
Clause no.7(Performance Requirements)	-	0	Repeated Clause.
Clause no.7.1(pH Value)	-	0	Repeated Clause.
Clause no.7.2 Table-2(Minimum absorption Capacity (X Large))	-	0	Repeated Clause.
Clause no.7.2 Table-2(Rewet under Load (All Sizes))	-	0	Repeated Clause.
Clause no.7.2 Table-2(Rate of Absorption (All Sizes))	-	0	Repeated Clause.
Clause no.7.3(Hygiene Testing Requirement, Total Viable Count)	-	0	Repeated Clause.
Clause no.7.3(Hygiene Testing Requirement, Staphylococcus Aureus)	-	0	Repeated Clause.
Clause no.7.5(Phthalate Test)	-	0	Repeated Clause.
9 & 9.1(Marking)	-	0	Repeated Clause.
10(Packing)	-	0	Repeated Clause.
CL 7.3(Total Viable Count)	-	0	Repeated Clause.
CL 7.3(Staphylococcus aureus)	-	0	Repeated Clause.

-
Included w.e.f 03.03.2025 Exclusion : Clause no.7.4 (Biocompatibility Evaluation- Cytotoxicity), Clause no. 7.4 (Biocompatibility Evaluation- Irritation), Clause no.7.4 (Biocompatibility Evaluation- Skin Sensitization), CL 7.4 (Biocompatibility Evaluation - Cytotoxicity, Irritation and Skin Sensitization), CL 7.6 (Biodegradability and Compostability (Optional)), CL 7.7 (Anti-Bacterial Activity Value (Optional))

8203

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 7494 (2023)

ALLOYS FOR INTERNAL COMBUSTION ENGINE VALVE APPLICATIONS ï¿½ SPECIFICATION (Second Revision)

VM, VA, VSA, VTA

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 5.0(classification.)	-	25000	5% discount for BIS sample
Clause. 5.0(manufacture)	-	25000	5% discount for BIS sample
Clause. 5.0(Product Designations)	-	25000	5% discount for BIS sample
Clause. 7.0(Carbon)	-	25000	5% discount for BIS sample
Clause. 7.0(Silicon)	-	25000	5% discount for BIS sample
Clause. 7.0(Manganese.)	-	25000	5% discount for BIS sample
Clause. 7.0(Phosphorus)	-	25000	5% discount for BIS sample
Clause. 7.0(Chromium)	-	25000	5% discount for BIS sample
Clause. 7.0(Nickel)	-	25000	5% discount for BIS sample
Clause. 7.0(Molybednum)	-	25000	5% discount for BIS sample
Clause. 7.0(Vanadium)	-	25000	5% discount for BIS sample
Clause. 7.0(Neobium)	-	25000	5% discount for BIS sample
Clause. 7.0(Titanium)	-	25000	5% discount for BIS sample
Clause. 7.0(Nitrogen)	-	25000	5% discount for BIS sample
Clause. 7.0(Tungsten.)	-	25000	5% discount for BIS sample
Clause. 7.0(Other)	-	25000	5% discount for BIS sample
Clause. 7.0(Aluminium)	-	25000	5% discount for BIS sample
Clause.9.0(Tensile Test)	-	25000	5% discount for BIS sample
Clause.9.0(Proof Stress)	-	25000	5% discount for BIS sample
Clause.9.0(Elongation)	-	25000	5% discount for BIS sample
Clause.9.0(Brinell Hardness)	-	25000	5% discount for BIS sample
Clause.8.0(Freedom from defect)	-	25000	5% discount for BIS sample
Clause.10.0(Grain size)	-	25000	5% discount for BIS sample
Clause.11.0(Non-metallic inclusion.)	-	25000	5% discount for BIS sample
Clause.12.0(Physical propertise)	-	25000	5% discount for BIS sample
Cluase.13.0(Dimensions and tolerances.)	-	25000	5% discount for BIS sample
Clause 16.0(Packing and marking.)	-	25000	5% discount for BIS sample

31 Dec, 2026

-
Included w.e.f. 03.10.2024

8204

Pious laboratories Pvt. Ltd., Indore

8183516

IS 7224 (2006)

Iodized salt, vacuum evaporated iodized salt and refined iodized salt - Specification (Second Revision)

8196.54 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause no4.1(Description)	-	98.99	-
Clause 4.3 Table 1(Moisture content)	-	299.99	-
Clause 4.3 Table 1(water insoluble matter)	-	299.99	-
Clause 4.3 Table 1(Chloride Content(as Nacl))	-	322.02	-
Clause 4.3 Table 1(Matter soluble in water other than sodium chloride)	-	325.99	-
Clause 4.3 Table 1(Calcium (as Ca))	-	506.01	-
Clause 4.3 Table 1(Magnesium (as mg))	-	506.02	-
Clause 4.3 Table 1(Sulphate (as SO4 ),)	-	506.01	-
Clause 4.3 Table 1(Iodine content, a) Manufacturers Level )	-	615.99	-
Clause 4.3 Table 1(b) Distribution channel including retailer)	-	615	-
Clause 4.3 Table 1(Alkalinity (as Na2CO3),)	-	500.01	-
Clause 4.3 Table 1(Lead as (Pb))	-	999.99	-
Clause 4.3 Table 1(Arsenic(as As))	-	999.99	-
Clause 4.3 Table 1(Iron(as Fe))	-	999.99	-
Clause 4.2(Particle Size)	-	200.5	-
4.4(Anticaking agents (Potassium Ferrocyanide))	-	400.01	-

07 Jan, 2028

-
-

8205

MSME-TESTING STATION, JAIPUR

8185014

IS 1848 : Part 1 (2018)

Writing and printing papers - Specification: Part 1 account book, azure lead, bond, cream laid and cream wove/printing white/printing coloured/printing offset, printing maplitho, printing white super calendered and typewriting types (Fifth Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4.2(Substance, Ref IS 1763)	-	900	substance test
Cl. 4.4(Size and tolerance on size)	-	900	-
Cl. 4.5(pH)	-	900	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Tensile index, Account book-CD)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Tensile index, Account book-MD)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Brightness ISO, Account book)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Opacity, Account book)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(One minute cobb test, Account book)	-	900	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Double fold, Account book-CD)	-	500	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Double fold, Account book-MD)	-	500	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Gloss, Account book)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Wax pick, Account book)	-	900	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Smoothness(Bendtsen),Account book)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Tear index, Account book-CD)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Tear index, Account book-MD)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Tensile index, Azure laid-CD)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Tensile index, Azure laid-MD)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Brightness ISO, Azure laid)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Opacity,Azure laid)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(One minute cobb test, Azure laid)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Double fold, Azure laid-CD)	-	500	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Double fold, Azure laid-MD)	-	500	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Gloss, Azure laid)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Wax pick, Azure laid)	-	900	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Smoothness(Bendtsen),Azure laid)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Tear index, Azure laid-CD)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Tear index, Azure laid-MD)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Tensile index, Bond-CD)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Tensile index, Bond-MD)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Brightness ISO, Bond)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Opacity, Bond)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(One minute cobb test, Bond)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Double fold, Bond-CD)	-	500	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Double fold, Bond-MD)	-	500	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Gloss, Bond)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Wax pick, Bond)	-	900	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Smoothness(Bendtsen),Bond)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Tear index, Bond-CD)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Tear index, Bond-MD)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Tensile index, Cream laid and cream wove/printing white/printing coloured/printing offset-CD)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Tensile index, Cream laid and cream wove/printing white/printing coloured/printing offset-MD)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Brightness ISO, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Opacity, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(One minute cobb test, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Double fold, Cream laid and cream wove/printing white/printing coloured/printing offset-CD)	-	500	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Double fold, Cream laid and cream wove/printing white/printing coloured/printing offset-MD)	-	500	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Gloss, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Wax pick, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	900	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Smoothness bendtsen, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Tear index, Cream laid and cream wove/printing white/printing coloured/printing offset-CD)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Tear index, Cream laid and cream wove/printing white/printing coloured/printing offset-MD)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Tensile index, Printing Maplitho-CD)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Tensile index, Printing Maplitho-MD)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Brightness ISO, Printing Maplitho)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Opacity, Printing Maplitho)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(One minute cobb test, Printing Maplitho)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Double fold, Printing Maplitho-CD)	-	500	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Double fold, Printing Maplitho-MD)	-	500	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Gloss, Printing Maplitho)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Wax pick, Printing Maplitho)	-	900	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Smoothness bendtsen, Printing Maplitho)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Tear index, Printing Maplitho-CD)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Tear index, Printing Maplitho-MD)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tensile index, Printing White Super Calendered-CD)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tensile index, Printing White Super Calendered-MD)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Brightness ISO, Printing White Super Calendered)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Opacity, Printing White Super Calendered)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(One minute cobb test, Printing White Super Calendered)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Double fold, Printing White Super Calendered-CD)	-	500	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Double fold, Printing White Super Calendered-MD)	-	500	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Gloss, Printing White Super Calendered)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Wax pick, Printing White Super Calendered)	-	900	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Smoothness bendtsen, Printing White Super Calendered)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tear index, Printing White Super Calendered-CD)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tear index, Printing White Super Calendered-MD)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tensile index, Typewriting-CD)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Tensile index, Typewriting-MD)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Brightness ISO, Typewriting)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Opacity, Typewriting)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(One minute cobb test, Typewriting)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Double fold, Typewriting-CD)	-	500	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Double fold, Typewriting-MD)	-	500	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Gloss, Typewriting)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Wax pick, Typewriting)	-	900	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Smoothness bendtsen, Typewriting)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Tear index, Typewriting-CD)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Tear index, Typewriting-MD)	-	1000	-
Cl.4.2(Substance, Ref IS 1763)	-	900	-
Cl. 4.4(Size and tolerance on size)	-	900	-
Cl. 4.5(pH)	-	900	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Tensile index, Account book-CD)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Tensile index, Account book-MD)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Brightness ISO, Account book)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Opacity, Account book)	-	10100	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(One minute cobb test, Account book)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Double fold, Account book-CD)	-	500	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Double fold, Account book-MD)	-	500	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Gloss, Account book)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Wax pick, Account book)	-	900	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Smoothness(Bendtsen),Account book)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Tear index, Account book-CD)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Tear index, Account book-MD)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Tensile index, Azure laid-CD)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Tensile index, Azure laid-MD)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Brightness ISO, Azure laid)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Opacity,Azure laid)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(One minute cobb test, Azure laid)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Double fold, Azure laid-CD)	-	500	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Double fold, Azure laid-MD)	-	500	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Gloss, Azure laid)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Wax pick, Azure laid)	-	900	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Smoothness(Bendtsen),Azure laid)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Tear index, Azure laid-CD)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Tear index, Azure laid-MD)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Tensile index, Bond-CD)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Tensile index, Bond-MD)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Brightness ISO, Bond)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Opacity, Bond)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(One minute cobb test, Bond)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Double fold, Bond-CD)	-	500	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Double fold, Bond-MD)	-	500	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Gloss, Bond)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Wax pick, Bond)	-	900	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Smoothness(Bendtsen),Bond)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Tear index, Bond-CD)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Tear index, Bond-MD)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Tensile index, Cream laid and cream wove/printing white/printing coloured/printing offset-CD)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Tensile index, Cream laid and cream wove/printing white/printing coloured/printing offset-MD)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Brightness ISO, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Opacity, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(One minute cobb test, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Double fold, Cream laid and cream wove/printing white/printing coloured/printing offset-CD)	-	500	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Double fold, Cream laid and cream wove/printing white/printing coloured/printing offset-MD)	-	500	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Gloss, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Wax pick, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	900	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Smoothness bendtsen, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Tear index, Cream laid and cream wove/printing white/printing coloured/printing offset-CD)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Tear index, Cream laid and cream wove/printing white/printing coloured/printing offset-MD)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Tensile index, Printing Maplitho-CD)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Tensile index, Printing Maplitho-MD)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Brightness ISO, Printing Maplitho)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Opacity, Printing Maplitho)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(One minute cobb test, Printing Maplitho)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Double fold, Printing Maplitho-CD)	-	500	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Double fold, Printing Maplitho-MD)	-	500	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Gloss, Printing Maplitho)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Wax pick, Printing Maplitho)	-	900	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Smoothness bendtsen, Printing Maplitho)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Tear index, Printing Maplitho-CD)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Tear index, Printing Maplitho-MD)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tensile index, Printing White Super Calendered-CD)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tensile index, Printing White Super Calendered-MD)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Brightness ISO, Printing White Super Calendered)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Opacity, Printing White Super Calendered)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(One minute cobb test, Printing White Super Calendered)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Double fold, Printing White Super Calendered-CD)	-	500	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Double fold, Printing White Super Calendered-MD)	-	500	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Gloss, Printing White Super Calendered)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Wax pick, Printing White Super Calendered)	-	900	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Smoothness bendtsen, Printing White Super Calendered)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tear index, Printing White Super Calendered-CD)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tear index, Printing White Super Calendered-MD)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tensile index, Typewriting-CD)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Tensile index, Typewriting-MD)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Brightness ISO, Typewriting)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Opacity, Typewriting)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(One minute cobb test, Typewriting)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Double fold, Typewriting-CD)	-	500	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Double fold, Typewriting-MD)	-	500	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Gloss, Typewriting)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Wax pick, Typewriting)	-	900	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Smoothness bendtsen, Typewriting)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Tear index, Typewriting-CD)	-	1000	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Tear index, Typewriting-MD)	-	1000	-
Cl.4.2(Substance)	-	900	-
Cl.4.2.1(Tolerances on nominal substance)	-	900	-
Cl.4.3(Thickness)	-	900	-
Cl.4.4(Sizes and tolerances on sizes)	-	900	-
Cl.4.5(pH)	-	900	-
Table-1(i)(Tensile index, CD)	-	1000	-
Table-1(i)(Tensile index, MD)	-	1000	-
Table-1(ii)(Brightness, ISO)	-	1000	-
Table-1(iii)(Opacity)	-	1000	-
Table-1(iv)(One minute cobb test)	-	1000	-
Table-1(v)(No of double fold, CD)	-	500	-
Table-1(v)(No of double fold, MD)	-	500	-
Table-1(vi)(Gloss)	-	1000	-
Table-1(vii)(Wax pick)	-	900	-
Table-1(viii)(Smoothness (Bendtsen))	-	1000	-
Table-1(ix)(Tear index, CD)	-	1000	-
Table-1(ix)(Tear index, MD)	-	1000	-

05 May, 2028

-
-

8206

FARE Labs Pvt. Ltd., Gurugram

8135716

IS 13428 (2024)

PACKAGED NATURAL MINERAL WATER - SPECIFICATION Third Revision

19145 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.2/Table 1/i(Colour)	-	150	30% Discount for BIS Samples
6.2/Table 1/ii(Odour)	-	40	30% Discount for BIS Samples
6.2/Table 1/iii(Taste)	-	50	30% Discount for BIS Samples
6.2/Table 1/iv(Turbidity)	-	40	30% Discount for BIS Samples
Cl- 6.3, Annex N (i)(P,P -DDE)	-	83.33	30% Discount for BIS Samples
Cl- 6.3, Annex N (i)(O,P -DDE)	-	83.33	30% Discount for BIS Samples
Cl- 6.3, Annex N (i)(P,P- DDT)	-	83.33	30% Discount for BIS Samples
Cl- 6.3, Annex N (i)(O,P -DDT)	-	83.33	30% Discount for BIS Samples
Cl-6.3, Annex N (i)(P,P- DDD)	-	83.33	30% Discount for BIS Samples
6.2/Table 1/vi(pH Value)	-	40	30% Discount for BIS Samples
Cl-6.3, Annex N (i)(O,P-DDD)	-	83.33	30% Discount for BIS Samples
Cl- 6.3, Annex N (ii)(γ-HCH (lindane))	-	83.33	30% Discount for BIS Samples
Cl- 6.3, Annex N (iii)(α-HCH)	-	83.33	30% Discount for BIS Samples
Cl- 6.3, Annex N (iii)(β-HCH)	-	83.33	30% Discount for BIS Samples
Cl- 6.3, Annex N (iii)(δ - HCH)	-	83.33	30% Discount for BIS Samples
Cl- 6.3, Annex N (iv)(Endosulfan - α)	-	83.33	30% Discount for BIS Samples
Cl- 6.3, Annex N (iv)(Endosulfan - β)	-	83.33	30% Discount for BIS Samples
Cl- 6.3, Annex N (iv)(Endosulfan - sulphate)	-	83.33	30% Discount for BIS Samples
Cl- 6.3, Annex N (v)(Monocrotophos)	-	83.33	30% Discount for BIS Samples
Cl- 6.3, Annex N (vi)(Ethion)	-	83.33	30% Discount for BIS Samples
Cl- 6.3, Annex N (vii)(Chlorpyrifos)	-	83.33	30% Discount for BIS Samples
Cl- 6.3, Annex N (viii)(Phorate and its oxygen analogue)	-	83.33	30% Discount for BIS Samples
Cl- 6.3, Annex N (viii)(phorate sulphoxide)	-	83.33	30% Discount for BIS Samples
Cl- 6.3, Annex N (viii)(phorate sulphone)	-	83.33	30% Discount for BIS Samples
Cl- 6.3, Annex N (ix)(2,4-D)	-	83.33	30% Discount for BIS Samples
Cl- 6.3, Annex N (x)(Butachlor)	-	83.33	30% Discount for BIS Samples
Cl- 6.3, Annex N (xi)(Isoproturon)	-	83.33	30% Discount for BIS Samples
Cl- 6.3, Annex N (xii)(Alachlor)	-	83.33	30% Discount for BIS Samples
Cl- 6.3, Annex N (xiii)(Atrazine)	-	83.33	30% Discount for BIS Samples
Cl- 6.3, Annex N (xiv)(Methyl parathion)	-	83.33	30% Discount for BIS Samples
Cl- 6.3, Annex N (xiv)(Methyl paraoxon)	-	83.33	30% Discount for BIS Samples
Cl- 6.3, Annex N (xv)(Malathion)	-	83.33	30% Discount for BIS Samples
Cl- 6.3, Annex N (xv)(malaoxon)	-	83.33	30% Discount for BIS Samples
Cl- 6.3, Annex N (xvi)(Aldrin)	-	83.33	30% Discount for BIS Samples
Cl-6.3, Annex N (XVI)(Dieldrin)	-	83.33	30% Discount for BIS Samples
6.2/Table 3/viii(Polychlorinated biphenyle (PCB))	-	2000	30% Discount for BIS Samples
6.2/Table 3/ix(Polynuclear aromatic hydrocarbons)	-	2000	30% Discount for BIS Samples
6.2/Table 2/iv(Manganese)	-	250	30% Discount for BIS Samples
6.2/Table 2/v(Copper)	-	225	30% Discount for BIS Samples
6.2/Table 2/vii(Barium)	-	250	30% Discount for BIS Samples
6.2/Table 2/viii(Antimony)	-	200	30% Discount for BIS Samples
6.2/Table 2/ix(Borate)	-	75	30% Discount for BIS Samples
6.2/Table 2/x(Silver)	-	250	30% Discount for BIS Samples
6.2/Table 2/xiii(Magnesium)	-	150	30% Discount for BIS Samples
6.2/Table 1/v(Total Dissoved)	-	75	30% Discount for BIS Samples
6.1.1(Escherichia coli)	-	250	30% Discount for BIS Samples
6.1.2(Coliform)	-	250	30% Discount for BIS Samples
6.1.3(Faecal Streptococci)	-	400	30% Discount for BIS Samples
6.1.4(Sulphite Reducing Anaerobe)	-	400	30% Discount for BIS Samples
6.1.5(Pseudomonas aeruginosa)	-	400	30% Discount for BIS Samples
6.1.6(Yeast and moould)	-	250	30% Discount for BIS Samples
6.1.7(Salmonella)	-	450	30% Discount for BIS Samples
6.1.8(Vibrio Cholera)	-	450	30% Discount for BIS Samples
6.2/Table 2/i(Nitrate)	-	150	30% Discount for BIS Samples
6.2/Table 2/ii(Nitrite)	-	150	30% Discount for BIS Samples
6.2/Table 2/iii(Sulphide)	-	150	30% Discount for BIS Samples
6.2/Table 2/vi(Fluoride)	-	150	30% Discount for BIS Samples
6.2/Table 2/xi(Chloride)	-	75	30% Discount for BIS Samples
6.2/Table 2/xii(Sulphate)	-	100	30% Discount for BIS Samples
6.2/Table 2/xiv(Calcium)	-	150	30% Discount for BIS Samples
6.2/Table 2/xv(Sodium)	-	150	30% Discount for BIS Samples
6.2/Table 2/xvi(Alkalinity)	-	75	30% Discount for BIS Samples
6.2/Table 2/xvii(Selenium)	-	250	30% Discount for BIS Samples
6.2/Table 2/xviii(Mineral Oil)	-	200	30% Discount for BIS Samples
6.2/Table 2/xix(Phenolic Compounds)	-	150	30% Discount for BIS Samples
6.2/Table 2/xx(Anionic Surface active agents)	-	200	30% Discount for BIS Samples
6.2/Table 3/iii(Cyanide)	-	250	30% Discount for BIS Samples
6.2/Table 3/vi(Lead)	-	250	30% Discount for BIS Samples
6.2/Table 3/vii(Nickel)	-	250	30% Discount for BIS Samples
6.2/Table 3/x(Uranium)	-	2750	30% Discount for BIS Samples
6.2/Table 3/i(Arsenic)	-	250	30% Discount for BIS Samples
6.2/Table 3/ii(Cadmium)	-	250	30% Discount for BIS Samples
6.2/Table 3/iv(Chromium)	-	250	30% Discount for BIS Samples
6.2/Table 3/v(Mercury)	-	250	30% Discount for BIS Samples
Cl-6.1.3(Staphylococcus aureus)	-	400	30% Discount for BIS Samples
Cl-6.1.7(Shigella)	-	450	30% Discount for BIS Samples
Cl-6.1.8(V. parahaemolyticus)	-	450	30% Discount for BIS Samples

09 Mar, 2029

-
Included w.e.f.28.10.2024 exclusion CL 6.2/Table 4/i (Alpha emitters, Bq/l, Max) CL 6.2/Table 4/ii (Beta emitters, Bq/l, Max)

8207

Sleen India Biz venture Private Limited, Agra

9139736

IS 5405 (2019)

Sanitary napkins – Specification (second revision)

Medical Textile

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5(SIZES, Regular )	-	500	Testing charge for parameter Sizes (Pad length and Pad width) (Regular, L, XL, XXL): Rs. 500/-
Cl 5(SIZES, Large)	-	0	-
Cl 5(SIZES, Extra Large)	-	0	-
Cl 5(SIZES, XXL)	-	0	-
Cl 5(Absorbent Capacity, Regular )	-	0	-
Cl 5(Absorbent Capacity, Large)	-	0	-
Cl 5(Absorbent Capacity, Extra Large)	-	0	-
Cl 7.1(pH Value, IS 1390 (cold method) for all sizes)	-	1000	-
Cl 7.2(Ability to Withstand Pressure after Absorption, for all sizes, Annex B)	-	500	-
Cl 7.3.1(Bacterial and Fungal Bioburden, 7.3.1.1, ISO 11737 (Part 1))	-	2000	-
Cl7.3.2(Test for Common Skin Pathogen — Staphylococcus Aureus, 7.3.2.1, IS 5887 (Part 2))	-	1000	-
Cl 5(SIZES, Regular )	-	0	-
Cl 5(SIZES, Large)	-	0	-
Cl 5(SIZES, Extra Large)	-	0	-
Cl 5(SIZES, XXL)	-	0	-
Cl 5(Absorbent Capacity, Regular )	-	0	-
Cl 5(Absorbent Capacity, Large)	-	0	-
Cl 5(Absorbent Capacity, Extra Large)	-	0	-
Cl 5(Absorbent Capacity, XXL)	-	0	-
Cl 7.1(pH Value, IS 1390 (cold method) for all sizes)	-	0	Repeated Clause.
Cl 7.2(Ability to Withstand Pressure after Absorption, for all sizes, Annex B)	-	0	Repeated Clause.
Cl 7.3.1(Bacterial and Fungal Bioburden, 7.3.1.1, ISO 11737 (Part 1))	-	0	Repeated Clause.
Cl7.3.2(Test for Common Skin Pathogen — Staphylococcus Aureus, 7.3.2.1, IS 5887 (Part 2))	-	0	Repeated Clause.
3.1(Cover/Top sheet)	-	500	-
3.2(Absorbent Core)	-	500	-
3.3(Barrier or Bottom Sheet)	-	400	-
4.1 (1)(Type and shapes of sanitary napkins)	-	400	-
4.2(Sanitary napkins shape & design)	-	400	-
6.0(Manufacture, workmanship & finish)	-	300	-
7.6(Pthalate test)	-	3000	-
Cl 5(Absorbent Capacity, XXL)	-	0	Repeated Clause.
Cl 5(SIZES, Regular )	-	0	Repeated Clause.
Cl 5(SIZES, Large)	-	0	Repeated Clause.
Cl 5(SIZES, Extra Large)	-	0	Repeated Clause.
Cl 5(SIZES, XXL)	-	0	Repeated Clause.
Cl 5(Absorbent Capacity, Regular )	-	0	Repeated Clause.
Cl 5(Absorbent Capacity, Large)	-	0	Repeated Clause.
Cl 5(Absorbent Capacity, Extra Large)	-	0	Repeated Clause.
Cl 7.1(pH Value, IS 1390 (cold method) for all sizes)	-	0	Repeated Clause.
Cl 7.2(Ability to Withstand Pressure after Absorption, for all sizes, Annex B)	-	0	Repeated Clause.
Cl 7.3.1(Bacterial and Fungal Bioburden, 7.3.1.1, ISO 11737 (Part 1))	-	0	Repeated Clause.
Cl7.3.2(Test for Common Skin Pathogen — Staphylococcus Aureus, 7.3.2.1, IS 5887 (Part 2))	-	0	Repeated Clause.
Cl 5(SIZES, Regular )	-	0	Repeated Clause.
Cl 5(SIZES, Large)	-	0	Repeated Clause.
Cl 5(SIZES, Extra Large)	-	0	Repeated Clause.
Cl 5(SIZES, XXL)	-	0	Repeated Clause.
Cl 5(Absorbent Capacity, Regular )	-	0	Repeated Clause.
Cl 5(Absorbent Capacity, Large)	-	0	Repeated Clause.
Cl 5(Absorbent Capacity, Extra Large)	-	0	Repeated Clause.
Cl 5(Absorbent Capacity, XXL)	-	0	Repeated Clause.
Cl 7.1(pH Value, IS 1390 (cold method) for all sizes)	-	0	Repeated Clause.
Cl 7.2(Ability to Withstand Pressure after Absorption, for all sizes, Annex B)	-	0	Repeated Clause.
Cl 7.3.1(Bacterial and Fungal Bioburden, 7.3.1.1, ISO 11737 (Part 1))	-	0	Repeated Clause.
Cl7.3.2(Test for Common Skin Pathogen — Staphylococcus Aureus, 7.3.2.1, IS 5887 (Part 2))	-	0	Repeated Clause.
3.1(Cover/Top sheet)	-	0	Repeated Clause.
3.2(Absorbent Core)	-	0	Repeated Clause.
3.3(Barrier or Bottom Sheet)	-	0	Repeated Clause.
4.1 (1)(Type and shapes of sanitary napkins)	-	0	Repeated Clause.
4.2(Sanitary napkins shape & design)	-	0	Repeated Clause.
6.0(Manufacture, workmanship & finish)	-	0	Repeated Clause.
7.6(Pthalate test)	-	0	Repeated Clause.
Cl 5(Absorbent Capacity, XXL)	-	0	Repeated Clause.

-
Included w.e.f 03.03.2025 Exclusion : Cl 7.4 (Biocompatibility Evaluation — Cytotoxicity, Irritation and Skin Sensitization, IS/ISO 10993 Part 5 and IS/ISO 10993 Part 10), Cl 7.5 (Biodegradability and Compostability (Optional), IS/ISO 17088.)

8208

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 6192 (2023)

Textiles Monoaxially oriented high density polyethylene HDPE and polypropylene PP tapes Specification

23405.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(High Density Polyethylene Tapes)	-	4425.00	Identification of material-2000.00 Density- 1325.00 MFI-1100.00 (Applicable only for HDPE tapes)
Cl-4.2(Polypropylene Tapes)	-	4425.00	Identification of material-2000.00 Density- 1325.00 MFI-1100.00 (Applicable only for PP tapes)
Cl-4.3(Additives and Masterbatches)	-	2000.00	-
Cl-5.1.1(Finished tape width)	-	500.00	-
Cl-5.1.2(Thickness of the tape)	-	500.00	-
Cl-5.1.3(Linear density of tape)	-	700.00	-
Cl-5.1.4(Polypropylene Tapes)	-	1100.00	Tenacity-1100.00
Cl-5.1.5(Average value of the elongation at break of tape)	-	0.00	Tenacity & Elongation at break have single charge.
Cl-5.1.6(UV radiation exposure)	-	11280.00	UV Exposure Charge- 10180.00 Retention of Breaking Strength- 1100.00
Cl-5.1.6(UV stabilized HDPE and PP resins)	-	0.00	Charges Taken above.
Cl-5.1.7(Average heat shrinkage of HDPE tapes)	-	1700.00	-
Cl-5.1.8(Ash Content)	-	1200.00	-
Cl-6.1(Marking)	-	0.00	-
Cl-4.1(High Density Polyethylene Tapes)	-	-	-
Cl-4.2(Polypropylene Tapes)	-	-	-
Cl-4.3(Additives and Masterbatches)	-	-	-
Cl-5.1.1(Finished tape width)	-	-	-
Cl-5.1.2(Thickness of the tape)	-	-	-
Cl-5.1.3(Linear density of tape)	-	-	-
Cl-5.1.4(Polypropylene Tapes)	-	-	-
Cl-5.1.5(Average value of the elongation at break of tape)	-	-	-
Cl-5.1.6(UV radiation exposure)	-	-	-
Cl-5.1.6(UV stabilized HDPE and PP resins)	-	-	-
Cl-5.1.7(Average heat shrinkage of HDPE tapes)	-	-	-
Cl-5.1.8(Ash Content)	-	-	-
Cl-6.1(Marking)	-	-	-

24 Apr, 2027

-
Included w.e.f 08.10.2024

8209

KALYANI LABORATORIES PRIVATE LIMITED, BHUBANESWAR

5134116

IS 13428 (2024)

PACKAGED NATURAL MINERAL WATER - SPECIFICATION Third Revision

PACKAGED NATURAL MINERAL WATER

18915 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.1(Escherichia coli)	-	340	OK
6.1.2(Coliform)	-	340	OK
6.1.3(Faecal Streptococci)	-	340	OK
6.1.4(Sulphite Reducing Anaerobe)	-	340	OK
6.1.5(Pseudomonas aeruginosa)	-	340	OK
6.1.6(Yeast and moould)	-	340	OK
6.1.7(Salmonella)	-	340	OK
6.1.8(Vibrio Cholera)	-	340	OK
6.2/Table 1/i(Colour)	-	60	OK
6.2/Table 1/ii(Odour)	-	60	OK
6.2/Table 1/iii(Taste)	-	60	OK
6.2/Table 1/iv(Turbidity)	-	60	OK
6.2/Table 1/v(Total Dissoved)	-	100	OK
6.2/Table 1/vi(pH Value)	-	60	OK
6.2/Table 2/i(Nitrate)	-	150	OK
6.2/Table 2/ii(Nitrite)	-	150	OK
6.2/Table 2/iii(Sulphide)	-	200	OK
6.2/Table 2/iv(Manganese)	-	150	OK
6.2/Table 2/v(Copper)	-	150	OK
6.2/Table 2/vi(Fluoride)	-	150	OK
6.2/Table 2/vii(Barium)	-	150	OK
6.2/Table 2/viii(Antimony)	-	200	OK
6.2/Table 2/ix(Borate)	-	200	OK
6.2/Table 2/x(Silver)	-	150	OK
6.2/Table 2/xi(Chloride)	-	150	OK
6.2/Table 2/xii(Sulphate)	-	150	OK
6.2/Table 2/xiii(Magnesium)	-	150	OK
6.2/Table 2/xiv(Calcium)	-	150	OK
6.2/Table 2/xv(Sodium)	-	150	OK
6.2/Table 2/xvi(Alkalinity)	-	150	OK
6.2/Table 2/xvii(Selenium)	-	150	OK
6.2/Table 2/xviii(Mineral Oil)	-	200	OK
6.2/Table 2/xix(Phenolic Compounds)	-	200	OK
6.2/Table 2/xx(Anionic Surface active agents)	-	200	OK
6.2/Table 3/i(Arsenic)	-	200	OK
6.2/Table 3/ii(Cadmium)	-	200	OK
6.2/Table 3/iii(Cyanide)	-	200	OK
6.2/Table 3/iv(Chromium)	-	150	OK
6.2/Table 3/v(Mercury)	-	200	OK
6.2/Table 3/vi(Lead)	-	200	OK
6.2/Table 3/vii(Nickel)	-	150	OK
6.2/Table 3/viii(Polychlorinated biphenyle (PCB))	-	700	OK
6.2/Table 3/ix(Polynuclear aromatic hydrocarbons)	-	700	OK
6.2/Table 3/x(Uranium)	-	1500	OK
Cl- 6.3, Annex N (i)(P,P -DDE)	-	30	OK
Cl- 6.3, Annex N (i)(O,P -DDE)	-	30	OK
Cl- 6.3, Annex N (i)(P,P- DDT)	-	30	OK
Cl- 6.3, Annex N (i)(O,P -DDT)	-	30	OK
Cl-6.3, Annex N (i)(P,P- DDD)	-	30	OK
Cl-6.3, Annex N (i)(O,P-DDD)	-	30	OK
Cl- 6.3, Annex N (ii)(γ-HCH (lindane))	-	30	OK
Cl- 6.3, Annex N (iii)(α-HCH)	-	30	OK
Cl- 6.3, Annex N (iii)(β-HCH)	-	30	OK
Cl- 6.3, Annex N (iii)(δ - HCH)	-	30	OK
Cl- 6.3, Annex N (iv)(Endosulfan - α)	-	30	OK
Cl- 6.3, Annex N (iv)(Endosulfan - β)	-	30	OK
Cl- 6.3, Annex N (iv)(Endosulfan - sulphate)	-	30	OK
Cl- 6.3, Annex N (v)(Monocrotophos)	-	30	OK
Cl- 6.3, Annex N (vi)(Ethion)	-	30	OK
Cl- 6.3, Annex N (vii)(Chlorpyrifos)	-	30	OK
Cl- 6.3, Annex N (viii)(Phorate and its oxygen analogue)	-	30	OK
Cl- 6.3, Annex N (viii)(phorate sulphoxide)	-	30	OK
Cl- 6.3, Annex N (viii)(phorate sulphone)	-	30	OK
Cl- 6.3, Annex N (ix)(2,4-D)	-	30	OK
Cl- 6.3, Annex N (x)(Butachlor)	-	30	OK
Cl- 6.3, Annex N (xi)(Isoproturon)	-	30	OK
Cl- 6.3, Annex N (xii)(Alachlor)	-	30	OK
Cl- 6.3, Annex N (xiii)(Atrazine)	-	30	OK
Cl- 6.3, Annex N (xiv)(Methyl parathion)	-	30	OK
Cl- 6.3, Annex N (xiv)(Methyl paraoxon)	-	30	OK
Cl- 6.3, Annex N (xv)(Malathion)	-	30	OK
Cl- 6.3, Annex N (xv)(malaoxon)	-	30	OK
Cl- 6.3, Annex N (xvi)(Aldrin)	-	30	OK
6.2/Table 4/i(Alpha emitters, Bq/l, Max)	-	1750	OK
6.2/Table 4/ii(Beta emitters, Bq/l, Max)	-	1750	OK
Cl-6.1.3(Staphylococcus aureus)	-	340	OK
Cl-6.1.7(Shigella)	-	340	OK
Cl-6.1.8(V. parahaemolyticus)	-	340	OK
Cl-6.3, Annex N (XVI)(Dieldrin)	-	30	OK
6.1.1(Escherichia coli)	-	340	ok
6.1.2(Coliform)	-	340	ok
6.1.3(Faecal Streptococci)	-	340	ok
6.1.4(Sulphite Reducing Anaerobe)	-	340	ok
6.1.5(Pseudomonas aeruginosa)	-	340	OK
6.1.6(Yeast and moould)	-	340	OK
6.1.7(Salmonella)	-	340	OK
6.1.8(Vibrio Cholera)	-	340	OK
6.2/Table 1/i(Colour)	-	60	OK
6.2/Table 1/ii(Odour)	-	60	OK
6.2/Table 1/iii(Taste)	-	60	OK
6.2/Table 1/iv(Turbidity)	-	60	OK
6.2/Table 1/v(Total Dissoved)	-	100	OK
6.2/Table 1/vi(pH Value)	-	60	OK
6.2/Table 2/i(Nitrate)	-	150	OK
6.2/Table 2/ii(Nitrite)	-	150	OK
6.2/Table 2/iii(Sulphide)	-	150	OK
6.2/Table 2/iv(Manganese)	-	150	OK
6.2/Table 2/v(Copper)	-	150	OK
6.2/Table 2/vi(Fluoride)	-	150	OK
6.2/Table 2/vii(Barium)	-	150	OK
6.2/Table 2/viii(Antimony)	-	150	OK
6.2/Table 2/ix(Borate)	-	150	OK
6.2/Table 2/x(Silver)	-	150	OK
6.2/Table 2/xi(Chloride)	-	150	OK
6.2/Table 2/xii(Sulphate)	-	150	OK
6.2/Table 2/xiii(Magnesium)	-	150	OK
6.2/Table 2/xiv(Calcium)	-	150	OK
6.2/Table 2/xv(Sodium)	-	150	OK
6.2/Table 2/xvi(Alkalinity)	-	150	OK
6.2/Table 2/xvii(Selenium)	-	150	OK
6.2/Table 2/xviii(Mineral Oil)	-	200	OK
6.2/Table 2/xix(Phenolic Compounds)	-	200	OK
6.2/Table 2/xx(Anionic Surface active agents)	-	200	OK
6.2/Table 3/i(Arsenic)	-	200	OK
6.2/Table 3/ii(Cadmium)	-	200	OK
6.2/Table 3/iii(Cyanide)	-	200	OK
6.2/Table 3/iv(Chromium)	-	150	OK
6.2/Table 3/v(Mercury)	-	200	OK
6.2/Table 3/vi(Lead)	-	200	OK
6.2/Table 3/vii(Nickel)	-	150	OK
6.2/Table 3/viii(Polychlorinated biphenyle (PCB))	-	700	OK
6.2/Table 3/ix(Polynuclear aromatic hydrocarbons)	-	700	OK
6.2/Table 3/x(Uranium)	-	1500	OK
Cl- 6.3, Annex N (i)(P,P -DDE)	-	30	OK
Cl- 6.3, Annex N (i)(O,P -DDE)	-	30	OK
Cl- 6.3, Annex N (i)(P,P- DDT)	-	30	OK
Cl- 6.3, Annex N (i)(O,P -DDT)	-	30	OK
Cl-6.3, Annex N (i)(P,P- DDD)	-	30	OK
Cl-6.3, Annex N (i)(O,P-DDD)	-	30	OK
Cl- 6.3, Annex N (ii)(γ-HCH (lindane))	-	30	OK
Cl- 6.3, Annex N (iii)(α-HCH)	-	30	OK
Cl- 6.3, Annex N (iii)(β-HCH)	-	30	OK
Cl- 6.3, Annex N (iii)(δ - HCH)	-	30	OK
Cl- 6.3, Annex N (iv)(Endosulfan - α)	-	30	OK
Cl- 6.3, Annex N (iv)(Endosulfan - β)	-	30	OK
Cl- 6.3, Annex N (iv)(Endosulfan - sulphate)	-	30	OK
Cl- 6.3, Annex N (v)(Monocrotophos)	-	30	OK
Cl- 6.3, Annex N (vi)(Ethion)	-	30	OK
Cl- 6.3, Annex N (vii)(Chlorpyrifos)	-	30	OK
Cl- 6.3, Annex N (viii)(Phorate and its oxygen analogue)	-	30	OK
Cl- 6.3, Annex N (viii)(phorate sulphoxide)	-	30	OK
Cl- 6.3, Annex N (viii)(phorate sulphone)	-	30	OK
Cl- 6.3, Annex N (ix)(2,4-D)	-	30	OK
Cl- 6.3, Annex N (x)(Butachlor)	-	30	OK
Cl- 6.3, Annex N (xi)(Isoproturon)	-	30	OK
Cl- 6.3, Annex N (xii)(Alachlor)	-	30	OK
Cl- 6.3, Annex N (xiii)(Atrazine)	-	30	OK
Cl- 6.3, Annex N (xiv)(Methyl parathion)	-	30	OK
Cl- 6.3, Annex N (xiv)(Methyl paraoxon)	-	30	OK
Cl- 6.3, Annex N (xv)(Malathion)	-	30	OK
Cl- 6.3, Annex N (xv)(malaoxon)	-	30	OK
Cl- 6.3, Annex N (xvi)(Aldrin)	-	30	OK
6.2/Table 4/i(Alpha emitters, Bq/l, Max)	-	1750	OK
6.2/Table 4/ii(Beta emitters, Bq/l, Max)	-	1750	OK
Cl-6.1.3(Staphylococcus aureus)	-	340	OK
Cl-6.1.7(Shigella)	-	340	OK
Cl-6.1.8(V. parahaemolyticus)	-	340	OK
Cl-6.3, Annex N (XVI)(Dieldrin)	-	30	OK
6.1.1(Escherichia coli)	-	340	OK
6.1.2(Coliform)	-	340	OK
6.1.3(Faecal Streptococci)	-	340	OK
6.1.4(Sulphite Reducing Anaerobe)	-	340	OK
6.1.5(Pseudomonas aeruginosa)	-	340	OK
6.1.6(Yeast and moould)	-	340	OK
6.1.7(Salmonella)	-	340	OK
6.1.8(Vibrio Cholera)	-	340	OK
6.2/Table 1/i(Colour)	-	60	OK
6.2/Table 1/ii(Odour)	-	60	OK
6.2/Table 1/iii(Taste)	-	60	OK
6.2/Table 1/iv(Turbidity)	-	60	OK
6.2/Table 1/v(Total Dissoved)	-	100	OK
6.2/Table 1/vi(pH Value)	-	60	OK
6.2/Table 2/i(Nitrate)	-	150	OK
6.2/Table 2/ii(Nitrite)	-	150	OK
6.2/Table 2/iii(Sulphide)	-	200	OK
6.2/Table 2/iv(Manganese)	-	150	OK
6.2/Table 2/v(Copper)	-	150	OK
6.2/Table 2/vi(Fluoride)	-	150	OK
6.2/Table 2/vii(Barium)	-	150	OK
6.2/Table 2/viii(Antimony)	-	150	OK
6.2/Table 2/ix(Borate)	-	150	OK
6.2/Table 2/x(Silver)	-	150	OK
6.2/Table 2/xi(Chloride)	-	150	OK
6.2/Table 2/xii(Sulphate)	-	150	OK
6.2/Table 2/xiii(Magnesium)	-	150	OK
6.2/Table 2/xiv(Calcium)	-	150	OK
6.2/Table 2/xv(Sodium)	-	150	OK
6.2/Table 2/xvi(Alkalinity)	-	150	OK
6.2/Table 2/xvii(Selenium)	-	150	OK
6.2/Table 2/xviii(Mineral Oil)	-	200	OK
6.2/Table 2/xix(Phenolic Compounds)	-	200	OK
6.2/Table 2/xx(Anionic Surface active agents)	-	200	OK
6.2/Table 3/i(Arsenic)	-	200	OK
6.2/Table 3/ii(Cadmium)	-	200	OK
6.2/Table 3/iii(Cyanide)	-	200	OK
6.2/Table 3/iv(Chromium)	-	150	OK
6.2/Table 3/v(Mercury)	-	200	OK
6.2/Table 3/vi(Lead)	-	200	OK
6.2/Table 3/vii(Nickel)	-	150	OK
6.2/Table 3/viii(Polychlorinated biphenyle (PCB))	-	700	OK
6.2/Table 3/ix(Polynuclear aromatic hydrocarbons)	-	700	OK
6.2/Table 3/x(Uranium)	-	1500	OK
Cl- 6.3, Annex N (i)(P,P -DDE)	-	30	OK
Cl- 6.3, Annex N (i)(O,P -DDE)	-	30	OK
Cl- 6.3, Annex N (i)(P,P- DDT)	-	30	OK
Cl- 6.3, Annex N (i)(O,P -DDT)	-	30	OK
Cl-6.3, Annex N (i)(P,P- DDD)	-	30	OK
Cl-6.3, Annex N (i)(O,P-DDD)	-	30	OK
Cl- 6.3, Annex N (ii)(γ-HCH (lindane))	-	30	OK
Cl- 6.3, Annex N (iii)(α-HCH)	-	30	OK
Cl- 6.3, Annex N (iii)(β-HCH)	-	30	OK
Cl- 6.3, Annex N (iii)(δ - HCH)	-	30	OK
Cl- 6.3, Annex N (iv)(Endosulfan - α)	-	30	OK
Cl- 6.3, Annex N (iv)(Endosulfan - β)	-	30	OK
Cl- 6.3, Annex N (iv)(Endosulfan - sulphate)	-	30	OK
Cl- 6.3, Annex N (v)(Monocrotophos)	-	30	OK
Cl- 6.3, Annex N (vi)(Ethion)	-	30	OK
Cl- 6.3, Annex N (vii)(Chlorpyrifos)	-	30	OK
Cl- 6.3, Annex N (viii)(Phorate and its oxygen analogue)	-	30	OK
Cl- 6.3, Annex N (viii)(phorate sulphoxide)	-	30	OK
Cl- 6.3, Annex N (viii)(phorate sulphone)	-	30	OK
Cl- 6.3, Annex N (ix)(2,4-D)	-	30	OK
Cl- 6.3, Annex N (x)(Butachlor)	-	30	OK
Cl- 6.3, Annex N (xi)(Isoproturon)	-	30	OK
Cl- 6.3, Annex N (xii)(Alachlor)	-	30	OK
Cl- 6.3, Annex N (xiii)(Atrazine)	-	30	OK
Cl- 6.3, Annex N (xiv)(Methyl parathion)	-	30	OK
Cl- 6.3, Annex N (xiv)(Methyl paraoxon)	-	30	OK
Cl- 6.3, Annex N (xv)(Malathion)	-	30	OK
Cl- 6.3, Annex N (xv)(malaoxon)	-	30	OK
Cl- 6.3, Annex N (xvi)(Aldrin)	-	30	OK
6.2/Table 4/i(Alpha emitters, Bq/l, Max)	-	1750	OK
6.2/Table 4/ii(Beta emitters, Bq/l, Max)	-	1750	OK
Cl-6.1.3(Staphylococcus aureus)	-	340	OK
Cl-6.1.7(Shigella)	-	340	OK
Cl-6.1.8(V. parahaemolyticus)	-	340	OK
Cl-6.3, Annex N (XVI)(Dieldrin)	-	30	OK

11 Jul, 2028

-
Included w.e.f. 30.09.2024

8210

VSIX ANALYTICAL LABS PVT LTD, BENGALURU

6139316

IS 13428 (2024)

PACKAGED NATURAL MINERAL WATER - SPECIFICATION Third Revision

16800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.1(Escherichia coli)	-	200	Not Applicable
6.1.2(Coliform)	-	200	Not Applicable
6.1.3(Faecal Streptococci)	-	300	Not Applicable
6.1.4(Sulphite Reducing Anaerobe)	-	500	Not Applicable
6.1.5(Pseudomonas aeruginosa)	-	500	Not Applicable
6.1.6(Yeast and moould)	-	500	Not Applicable
6.1.7(Salmonella)	-	500	Not Applicable
6.1.8(Vibrio Cholera)	-	500	Not Applicable
6.2/Table 1/i(Colour)	-	100	Not Applicable
6.2/Table 1/ii(Odour)	-	100	Not Applicable
6.2/Table 1/iii(Taste)	-	100	Not Applicable
6.2/Table 1/iv(Turbidity)	-	100	Not Applicable
6.2/Table 1/v(Total Dissoved)	-	100	Not Applicable
6.2/Table 1/vi(pH Value)	-	100	Not Applicable
6.2/Table 2/i(Nitrate)	-	100	Not Applicable
6.2/Table 2/ii(Nitrite)	-	100	Not Applicable
6.2/Table 2/iii(Sulphide)	-	200	Not Applicable
6.2/Table 2/iv(Manganese)	-	200	Not Applicable
6.2/Table 2/v(Copper)	-	200	Not Applicable
6.2/Table 2/vi(Fluoride)	-	200	Not Applicable
6.2/Table 2/vii(Barium)	-	200	Not Applicable
6.2/Table 2/viii(Antimony)	-	200	Not Applicable
6.2/Table 2/ix(Borate)	-	200	Not Applicable
6.2/Table 2/x(Silver)	-	200	Not Applicable
6.2/Table 2/xi(Chloride)	-	100	Not Applicable
6.2/Table 2/xii(Sulphate)	-	100	Not Applicable
6.2/Table 2/xiii(Magnesium)	-	100	Not Applicable
6.2/Table 2/xiv(Calcium)	-	100	Not Applicable
6.2/Table 2/xv(Sodium)	-	200	Not Applicable
6.2/Table 2/xvi(Alkalinity)	-	100	Not Applicable
6.2/Table 2/xvii(Selenium)	-	200	Not Applicable
6.2/Table 2/xviii(Mineral Oil)	-	200	Not Applicable
6.2/Table 2/xix(Phenolic Compounds)	-	200	Not Applicable
6.2/Table 2/xx(Anionic Surface active agents)	-	200	Not Applicable
6.2/Table 3/i(Arsenic)	-	200	Not Applicable
6.2/Table 3/ii(Cadmium)	-	200	Not Applicable
6.2/Table 3/iii(Cyanide)	-	200	Not Applicable
6.2/Table 3/iv(Chromium)	-	200	Not Applicable
6.2/Table 3/v(Mercury)	-	200	Not Applicable
6.2/Table 3/vi(Lead)	-	200	Not Applicable
6.2/Table 3/vii(Nickel)	-	200	Not Applicable
6.2/Table 3/viii(Polychlorinated biphenyle (PCB))	-	400	Not Applicable
6.2/Table 3/ix(Polynuclear aromatic hydrocarbons)	-	400	Not Applicable
6.2/Table 3/x(Uranium)	-	1200	Not Applicable
Cl- 6.3, Annex N (i)(P,P -DDE)	-	100	Not Applicable
Cl- 6.3, Annex N (i)(O,P -DDE)	-	100	Not Applicable
Cl- 6.3, Annex N (i)(P,P- DDT)	-	100	Not Applicable
Cl- 6.3, Annex N (i)(O,P -DDT)	-	100	Not Applicable
Cl-6.3, Annex N (i)(P,P- DDD)	-	100	Not Applicable
Cl-6.3, Annex N (i)(O,P-DDD)	-	100	Not Applicable
Cl- 6.3, Annex N (ii)(γ-HCH (lindane))	-	100	Not Applicable
Cl- 6.3, Annex N (iii)(α-HCH)	-	100	Not Applicable
Cl- 6.3, Annex N (iii)(β-HCH)	-	100	Not Applicable
Cl- 6.3, Annex N (iii)(δ - HCH)	-	100	Not Applicable
Cl- 6.3, Annex N (iv)(Endosulfan - α)	-	100	Not Applicable
Cl- 6.3, Annex N (iv)(Endosulfan - β)	-	100	Not Applicable
Cl- 6.3, Annex N (iv)(Endosulfan - sulphate)	-	200	Not Applicable
Cl- 6.3, Annex N (v)(Monocrotophos)	-	200	Not Applicable
Cl- 6.3, Annex N (vi)(Ethion)	-	200	Not Applicable
Cl- 6.3, Annex N (vii)(Chlorpyrifos)	-	200	Not Applicable
Cl- 6.3, Annex N (viii)(Phorate and its oxygen analogue)	-	200	Not Applicable
Cl- 6.3, Annex N (viii)(phorate sulphoxide)	-	200	Not Applicable
Cl- 6.3, Annex N (viii)(phorate sulphone)	-	200	Not Applicable
Cl- 6.3, Annex N (ix)(2,4-D)	-	200	Not Applicable
Cl- 6.3, Annex N (x)(Butachlor)	-	200	Not Applicable
Cl- 6.3, Annex N (xi)(Isoproturon)	-	200	Not Applicable
Cl- 6.3, Annex N (xii)(Alachlor)	-	200	Not Applicable
Cl- 6.3, Annex N (xiii)(Atrazine)	-	200	Not Applicable
Cl- 6.3, Annex N (xiv)(Methyl parathion)	-	200	Not Applicable
Cl- 6.3, Annex N (xiv)(Methyl paraoxon)	-	200	Not Applicable
Cl- 6.3, Annex N (xv)(Malathion)	-	200	Not Applicable
Cl- 6.3, Annex N (xv)(malaoxon)	-	200	Not Applicable
Cl-6.1.3(Staphylococcus aureus)	-	500	Not Applicable
Cl-6.1.7(Shigella)	-	500	Not Applicable
Cl-6.1.8(V. parahaemolyticus)	-	500	Not Applicable
Cl- 6.3, Annex N (xvi)(Aldrin)	-	200	Not Applicable
Cl-6.3, Annex N (XVI)(Dieldrin)	-	200	Not Applicable
6.1.1(Escherichia coli)	-	0	-
6.1.2(Coliform)	-	0	-
6.1.3(Faecal Streptococci)	-	0	-
6.1.4(Sulphite Reducing Anaerobe)	-	0	-
6.1.5(Pseudomonas aeruginosa)	-	0	-
6.1.6(Yeast and moould)	-	0	-
6.1.7(Salmonella)	-	0	-
6.1.8(Vibrio Cholera)	-	0	-
6.2/Table 1/i(Colour)	-	0	-
6.2/Table 1/ii(Odour)	-	0	-
6.2/Table 1/iii(Taste)	-	0	-
6.2/Table 1/iv(Turbidity)	-	0	-
6.2/Table 1/v(Total Dissoved)	-	0	-
6.2/Table 1/vi(pH Value)	-	0	-
6.2/Table 2/i(Nitrate)	-	0	-
6.2/Table 2/ii(Nitrite)	-	0	-
6.2/Table 2/iii(Sulphide)	-	0	-
6.2/Table 2/iv(Manganese)	-	0	-
6.2/Table 2/v(Copper)	-	0	-
6.2/Table 2/vi(Fluoride)	-	0	-
6.2/Table 2/vii(Barium)	-	0	-
6.2/Table 2/viii(Antimony)	-	0	-
6.2/Table 2/ix(Borate)	-	0	-
6.2/Table 2/x(Silver)	-	0	-
6.2/Table 2/xi(Chloride)	-	0	-
6.2/Table 2/xii(Sulphate)	-	0	-
6.2/Table 2/xiii(Magnesium)	-	0	-
6.2/Table 2/xiv(Calcium)	-	0	-
6.2/Table 2/xv(Sodium)	-	0	-
6.2/Table 2/xvi(Alkalinity)	-	0	-
6.2/Table 2/xvii(Selenium)	-	0	-
6.2/Table 2/xviii(Mineral Oil)	-	0	-
6.2/Table 2/xix(Phenolic Compounds)	-	0	-
6.2/Table 2/xx(Anionic Surface active agents)	-	0	-
6.2/Table 3/i(Arsenic)	-	0	-
6.2/Table 3/ii(Cadmium)	-	0	-
6.2/Table 3/iii(Cyanide)	-	0	-
6.2/Table 3/iv(Chromium)	-	0	-
6.2/Table 3/v(Mercury)	-	0	-
6.2/Table 3/vi(Lead)	-	0	-
6.2/Table 3/vii(Nickel)	-	0	-
6.2/Table 3/viii(Polychlorinated biphenyle (PCB))	-	0	-
6.2/Table 3/ix(Polynuclear aromatic hydrocarbons)	-	0	-
6.2/Table 3/x(Uranium)	-	0	-
Cl- 6.3, Annex N (i)(P,P -DDE)	-	0	-
Cl- 6.3, Annex N (i)(O,P -DDE)	-	0	-
Cl- 6.3, Annex N (i)(P,P- DDT)	-	0	-
Cl- 6.3, Annex N (i)(O,P -DDT)	-	0	-
Cl-6.3, Annex N (i)(P,P- DDD)	-	0	-
Cl-6.3, Annex N (i)(O,P-DDD)	-	0	-
Cl- 6.3, Annex N (ii)(γ-HCH (lindane))	-	0	-
Cl- 6.3, Annex N (iii)(α-HCH)	-	0	-
Cl- 6.3, Annex N (iii)(β-HCH)	-	0	-
Cl- 6.3, Annex N (iii)(δ - HCH)	-	0	-
Cl- 6.3, Annex N (iv)(Endosulfan - α)	-	0	-
Cl- 6.3, Annex N (iv)(Endosulfan - β)	-	0	-
Cl- 6.3, Annex N (iv)(Endosulfan - sulphate)	-	0	-
Cl- 6.3, Annex N (v)(Monocrotophos)	-	0	-
Cl- 6.3, Annex N (vi)(Ethion)	-	0	-
Cl- 6.3, Annex N (vii)(Chlorpyrifos)	-	0	-
Cl- 6.3, Annex N (viii)(Phorate and its oxygen analogue)	-	0	-
Cl- 6.3, Annex N (viii)(phorate sulphoxide)	-	0	-
Cl- 6.3, Annex N (viii)(phorate sulphone)	-	0	-
Cl- 6.3, Annex N (ix)(2,4-D)	-	0	-
Cl- 6.3, Annex N (x)(Butachlor)	-	0	-
Cl- 6.3, Annex N (xi)(Isoproturon)	-	0	-
Cl- 6.3, Annex N (xii)(Alachlor)	-	0	-
Cl- 6.3, Annex N (xiii)(Atrazine)	-	0	-
Cl- 6.3, Annex N (xiv)(Methyl parathion)	-	0	-
Cl- 6.3, Annex N (xiv)(Methyl paraoxon)	-	0	-
Cl- 6.3, Annex N (xv)(Malathion)	-	0	-
Cl- 6.3, Annex N (xv)(malaoxon)	-	0	-
Cl-6.1.3(Staphylococcus aureus)	-	0	-
Cl-6.1.7(Shigella)	-	0	-
Cl-6.1.8(V. parahaemolyticus)	-	0	-
Cl- 6.3, Annex N (xvi)(Aldrin)	-	0	-
Cl-6.3, Annex N (XVI)(Dieldrin)	-	0	-

18 Mar, 2027

-
including w.e.f 09.10.2024 1 cl-5.3, table-4(i) (Alpha emitters, Becquerel (bq/i) 2. cl-5.3, table-4(ii) (Beta emitters, Becquerel (bq/i)

8211

Bee Pharmo Labs Pvt. Ltd., Thane

7139416

IS 13428 (2024)

PACKAGED NATURAL MINERAL WATER - SPECIFICATION Third Revision

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.2(Coliform)	-	300	-
6.1.1(Escherichia coli)	-	300	-
6.1.3(Faecal Streptococci)	-	300	-
6.1.4(Sulphite Reducing Anaerobe)	-	300	-
6.1.5(Pseudomonas aeruginosa)	-	300	-
6.1.6(Yeast and moould)	-	300	-
6.1.7(Salmonella)	-	300	-
6.1.8(Vibrio Cholera)	-	300	-
Cl-6.1.3(Staphylococcus aureus)	-	300	-
Cl-6.1.7(Shigella)	-	300	-
Cl-6.1.8(V. parahaemolyticus)	-	300	-
6.2/Table 1/i(Colour)	-	75	-
6.2/Table 1/ii(Odour)	-	50	-
6.2/Table 1/iv(Turbidity)	-	75	-
6.2/Table 1/iii(Taste)	-	50	-
6.2/Table 1/v(Total Dissoved)	-	200	-
6.2/Table 1/vi(pH Value)	-	50	-
6.2/Table 2/i(Nitrate)	-	125	-
6.2/Table 2/ii(Nitrite)	-	125	-
6.2/Table 2/iii(Sulphide)	-	125	-
6.2/Table 2/iv(Manganese)	-	125	-
6.2/Table 2/v(Copper)	-	125	-
6.2/Table 2/vi(Fluoride)	-	125	-
6.2/Table 2/vii(Barium)	-	125	-
6.2/Table 2/viii(Antimony)	-	125	-
6.2/Table 2/ix(Borate)	-	125	-
6.2/Table 2/x(Silver)	-	125	-
6.2/Table 2/xi(Chloride)	-	125	-
6.2/Table 2/xii(Sulphate)	-	125	-
6.2/Table 2/xiii(Magnesium)	-	125	-
6.2/Table 2/xiv(Calcium)	-	125	-
6.2/Table 2/xv(Sodium)	-	125	-
6.2/Table 2/xvi(Alkalinity)	-	125	-
6.2/Table 2/xvii(Selenium)	-	125	-
6.2/Table 2/xviii(Mineral Oil)	-	200	-
6.2/Table 2/xix(Phenolic Compounds)	-	200	-
6.2/Table 2/xx(Anionic Surface active agents)	-	200	-
6.2/Table 3/i(Arsenic)	-	125	-
6.2/Table 3/ii(Cadmium)	-	125	-
6.2/Table 3/iii(Cyanide)	-	200	-
6.2/Table 3/iv(Chromium)	-	125	-
6.2/Table 3/v(Mercury)	-	125	-
6.2/Table 3/vi(Lead)	-	125	-
6.2/Table 3/vii(Nickel)	-	125	-
6.2/Table 3/viii(Polychlorinated biphenyle (PCB))	-	500	-
6.2/Table 3/ix(Polynuclear aromatic hydrocarbons)	-	500	-
6.2/Table 3/x(Uranium)	-	500	-
Cl- 6.3, Annex N (i)(P,P -DDE)	-	3025	-
Cl- 6.3, Annex N (i)(O,P -DDE)	-	0	-
Cl- 6.3, Annex N (i)(P,P- DDT)	-	0	-
Cl- 6.3, Annex N (i)(O,P -DDT)	-	0	-
Cl-6.3, Annex N (i)(P,P- DDD)	-	0	-
Cl-6.3, Annex N (i)(O,P-DDD)	-	0	-
Cl- 6.3, Annex N (ii)(γ-HCH (lindane))	-	0	-
Cl- 6.3, Annex N (iii)(α-HCH)	-	0	-
Cl- 6.3, Annex N (iii)(β-HCH)	-	0	-
Cl- 6.3, Annex N (iii)(δ - HCH)	-	0	-
Cl- 6.3, Annex N (iv)(Endosulfan - α)	-	0	-
Cl- 6.3, Annex N (iv)(Endosulfan - β)	-	0	-
Cl- 6.3, Annex N (iv)(Endosulfan - sulphate)	-	0	-
Cl- 6.3, Annex N (v)(Monocrotophos)	-	0	-
Cl- 6.3, Annex N (vi)(Ethion)	-	0	-
Cl- 6.3, Annex N (vii)(Chlorpyrifos)	-	0	-
Cl- 6.3, Annex N (viii)(Phorate and its oxygen analogue)	-	0	-
Cl- 6.3, Annex N (viii)(phorate sulphoxide)	-	0	-
Cl- 6.3, Annex N (viii)(phorate sulphone)	-	0	-
Cl- 6.3, Annex N (ix)(2,4-D)	-	0	-
Cl- 6.3, Annex N (x)(Butachlor)	-	0	-
Cl- 6.3, Annex N (xi)(Isoproturon)	-	0	-
Cl- 6.3, Annex N (xii)(Alachlor)	-	0	-
Cl- 6.3, Annex N (xiii)(Atrazine)	-	0	-
Cl- 6.3, Annex N (xiv)(Methyl parathion)	-	0	-
Cl- 6.3, Annex N (xiv)(Methyl paraoxon)	-	0	-
Cl- 6.3, Annex N (xv)(Malathion)	-	0	-
Cl- 6.3, Annex N (xv)(malaoxon)	-	0	-
Cl- 6.3, Annex N (xvi)(Aldrin)	-	0	-
Cl-6.3, Annex N (XVI)(Dieldrin)	-	0	-
6.1.2(Coliform)	-	0	Duplicate entry
6.1.1(Escherichia coli)	-	0	Duplicate entry
6.1.3(Faecal Streptococci)	-	0	Duplicate entry
6.1.4(Sulphite Reducing Anaerobe)	-	0	Duplicate entry
6.1.5(Pseudomonas aeruginosa)	-	0	Duplicate entry
6.1.6(Yeast and moould)	-	0	Duplicate entry
6.1.7(Salmonella)	-	0	Duplicate entry
6.1.8(Vibrio Cholera)	-	0	Duplicate entry
Cl-6.1.3(Staphylococcus aureus)	-	0	Duplicate entry
Cl-6.1.7(Shigella)	-	0	Duplicate entry
Cl-6.1.8(V. parahaemolyticus)	-	0	Duplicate entry
6.2/Table 1/i(Colour)	-	0	Duplicate entry
6.2/Table 1/ii(Odour)	-	0	Duplicate entry
6.2/Table 1/iv(Turbidity)	-	0	Duplicate entry
6.2/Table 1/iii(Taste)	-	0	Duplicate entry
6.2/Table 1/v(Total Dissoved)	-	0	Duplicate entry
6.2/Table 1/vi(pH Value)	-	0	Duplicate entry
6.2/Table 2/i(Nitrate)	-	0	Duplicate entry
6.2/Table 2/ii(Nitrite)	-	0	Duplicate entry
6.2/Table 2/iii(Sulphide)	-	0	Duplicate entry
6.2/Table 2/iv(Manganese)	-	0	Duplicate entry
6.2/Table 2/v(Copper)	-	0	Duplicate entry
6.2/Table 2/vi(Fluoride)	-	0	Duplicate entry
6.2/Table 2/vii(Barium)	-	0	Duplicate entry
6.2/Table 2/viii(Antimony)	-	0	Duplicate entry
6.2/Table 2/ix(Borate)	-	0	Duplicate entry
6.2/Table 2/x(Silver)	-	0	Duplicate entry
6.2/Table 2/xi(Chloride)	-	0	Duplicate entry
6.2/Table 2/xii(Sulphate)	-	0	Duplicate entry
6.2/Table 2/xiii(Magnesium)	-	0	Duplicate entry
6.2/Table 2/xiv(Calcium)	-	0	Duplicate entry
6.2/Table 2/xv(Sodium)	-	0	Duplicate entry
6.2/Table 2/xvi(Alkalinity)	-	0	Duplicate entry
6.2/Table 2/xvii(Selenium)	-	0	Duplicate entry
6.2/Table 2/xviii(Mineral Oil)	-	0	Duplicate entry
6.2/Table 2/xix(Phenolic Compounds)	-	0	Duplicate entry
6.2/Table 2/xx(Anionic Surface active agents)	-	0	Duplicate entry
6.2/Table 3/i(Arsenic)	-	0	Duplicate entry
6.2/Table 3/ii(Cadmium)	-	0	Duplicate entry
6.2/Table 3/iii(Cyanide)	-	0	Duplicate entry
6.2/Table 3/iv(Chromium)	-	0	Duplicate entry
6.2/Table 3/v(Mercury)	-	0	Duplicate entry
6.2/Table 3/vi(Lead)	-	0	Duplicate entry
6.2/Table 3/vii(Nickel)	-	0	Duplicate entry
6.2/Table 3/viii(Polychlorinated biphenyle (PCB))	-	0	Duplicate entry
6.2/Table 3/ix(Polynuclear aromatic hydrocarbons)	-	0	Duplicate entry
6.2/Table 3/x(Uranium)	-	0	Duplicate entry
Cl- 6.3, Annex N (i)(P,P -DDE)	-	0	Duplicate entry
Cl- 6.3, Annex N (i)(O,P -DDE)	-	0	Duplicate entry
Cl- 6.3, Annex N (i)(P,P- DDT)	-	0	Duplicate entry
Cl- 6.3, Annex N (i)(O,P -DDT)	-	0	Duplicate entry
Cl-6.3, Annex N (i)(P,P- DDD)	-	0	Duplicate entry
Cl-6.3, Annex N (i)(O,P-DDD)	-	0	Duplicate entry
Cl- 6.3, Annex N (ii)(γ-HCH (lindane))	-	0	Duplicate entry
Cl- 6.3, Annex N (iii)(α-HCH)	-	0	Duplicate entry
Cl- 6.3, Annex N (iii)(β-HCH)	-	0	Duplicate entry
Cl- 6.3, Annex N (iii)(δ - HCH)	-	0	Duplicate entry
Cl- 6.3, Annex N (iv)(Endosulfan - α)	-	0	Duplicate entry
Cl- 6.3, Annex N (iv)(Endosulfan - β)	-	0	Duplicate entry
Cl- 6.3, Annex N (iv)(Endosulfan - sulphate)	-	0	Duplicate entry
Cl- 6.3, Annex N (v)(Monocrotophos)	-	0	Duplicate entry
Cl- 6.3, Annex N (vi)(Ethion)	-	0	Duplicate entry
Cl- 6.3, Annex N (vii)(Chlorpyrifos)	-	0	Duplicate entry
Cl- 6.3, Annex N (viii)(Phorate and its oxygen analogue)	-	0	Duplicate entry
Cl- 6.3, Annex N (viii)(phorate sulphoxide)	-	0	Duplicate entry
Cl- 6.3, Annex N (viii)(phorate sulphone)	-	0	Duplicate entry
Cl- 6.3, Annex N (ix)(2,4-D)	-	0	Duplicate entry
Cl- 6.3, Annex N (x)(Butachlor)	-	0	Duplicate entry
Cl- 6.3, Annex N (xi)(Isoproturon)	-	0	Duplicate entry
Cl- 6.3, Annex N (xii)(Alachlor)	-	0	Duplicate entry
Cl- 6.3, Annex N (xiii)(Atrazine)	-	0	Duplicate entry
Cl- 6.3, Annex N (xiv)(Methyl parathion)	-	0	Duplicate entry
Cl- 6.3, Annex N (xiv)(Methyl paraoxon)	-	0	Duplicate entry
Cl- 6.3, Annex N (xv)(Malathion)	-	0	Duplicate entry
Cl- 6.3, Annex N (xv)(malaoxon)	-	0	Duplicate entry
Cl- 6.3, Annex N (xvi)(Aldrin)	-	0	Duplicate entry
Cl-6.3, Annex N (XVI)(Dieldrin)	-	0	Duplicate entry

15 Mar, 2027

-
Included w.e.f 09.10.2024 Excluding: Cl 6.2/Table 4/i (Alpha emitters, Bq/l, Max), Cl 6.2/Table 4/ii (Beta emitters, Bq/l, Max)

8212

Hi Physix Laboratory India Private Limited, Pune

7126926

IS 14286 : Part 1 : Sec 4 (2023)

Terrestrial photovoltaic PV modules Design qualification and type approval Part 1-4: Special requirements for testing of thin-film CuInGASSe2 based photovoltaic PV modules Third Revision

1985000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-8(Major visual defects)	-	0	-
Cl-11.1(Visual inspection (MQT 01))	-	20000	-
Cl-11.2(Maximum power determination (MQT 02))	-	30000	-
Cl-11.3(Insulation test (MQT 03))	-	15000	-
Cl-11.4(Measurement of temperature coefficients (MQT 04))	-	60000	-
Cl-11.5(Measurement of nominal module operating temperature (NMOT) (MQT 05))	-	0	-
Cl-11.6(Performance at STC (MQT 06.1) and NMOT (MQT 06.2)	-	30000	-
Cl-11.7(Performance at low irradiance (MQT 07))	-	30000	-
Cl-11.8(Outdoor exposure test (MQT 08))	-	30000	-
Cl-11.9(Hot-spot endurance test (MQT 09))	-	200000	-
Cl-11.10(UV preconditioning test (MQT 10))	-	150000	-
Cl-11.11(Thermal cycling test (MQT 11))	-	250000	-
Cl-11.12(As per IEC 61215-1:2016)	-	100000	11.12 (Humidity-freeze test (MQT 12))
Cl-11.13(Damp heat test (MQT 13))	-	150000	-
Cl-11.14(Robustness of terminations test (MQT 14))	-	15000	-
Cl-11.15(Robustness of terminations test (MQT 14))	-	20000	11.15 (Wet leakage current test (MQT 15))
Cl-11.16(Static mechanical load test (MQT 16))	-	40000	-
Cl-11.17(Hail test (MQT 17))	-	20000	-
Cl-11.18(Bypass diode testing (MQT 18))	-	80000	-
Cl-11.19(Stabilization (MQT 19))	-	300000	-
Cl-8(Major visual defects)	-	0	-
Cl-11.1(Visual inspection (MQT 01))	-	0	-
Cl-11.2(Maximum power determination (MQT 02))	-	0	-
Cl-11.3(Insulation test (MQT 03))	-	0	-
Cl-11.4(Measurement of temperature coefficients (MQT 04))	-	0	-
Cl-11.5(Measurement of nominal module operating temperature (NMOT) (MQT 05))	-	0	-
Cl-11.6(Performance at STC (MQT 06.1) and NMOT (MQT 06.2)	-	0	-
Cl-11.7(Performance at low irradiance (MQT 07))	-	0	-
Cl-11.8(Outdoor exposure test (MQT 08))	-	0	-
Cl-11.9(Hot-spot endurance test (MQT 09))	-	0	-
Cl-11.10(UV preconditioning test (MQT 10))	-	0	-
Cl-11.11(Thermal cycling test (MQT 11))	-	0	-
Cl-11.12(As per IEC 61215-1:2016)	-	0	-
Cl-11.13(Damp heat test (MQT 13))	-	0	-
Cl-11.14(Robustness of terminations test (MQT 14))	-	0	-
Cl-11.15(Robustness of terminations test (MQT 14))	-	0	-
Cl-11.16(Static mechanical load test (MQT 16))	-	0	-
Cl-11.17(Hail test (MQT 17))	-	0	-
Cl-11.18(Bypass diode testing (MQT 18))	-	0	-
Cl-11.19(Stabilization (MQT 19))	-	0	-
5(Marking and documentation)	-	5000	-
11.20(Cyclic (dynamic) mechanical load test (MQT 20))	-	120000	-
11.21(Potential induced degradation test (MQT 21))	-	300000	-
11.22(Bending test (MQT 22))	-	20000	-

20 Jun, 2028

-
Included w.e.f 05.11.2024

8213

Sleen India Biz venture Private Limited, Agra

9139736

IS 1117 (2018)

Laboratory glassware - Single - Volume pipettes (Second Revision)

Single- Volume Pipettes - A/AS/B

16000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.1&3(Marking)	-	500	-
3(Class of Accuracy)	-	2000	-
4.1(Nominal capacities)	-	2000	-
4.2(Accuracy)	-	2000	-
5.1.1(Limit of Alkalinity)	-	2000	-
5.1(Material)	-	1000	-
5.1(Material)	-	1000	-
5.2(Pattern of Pipette)	-	2000	-
5.3(Workmanship & Finish)	-	500	-
5.4(i) Distance of graduation line from top of pipette.)	-	500	-
5.4(ii) Distance from graduation line to top of bulb(pattern 2))	-	500	-
5.4(iii)Distance from graduation line to tip of jet (Pattern 1))	-	500	-
5.4(iv) Wall thickness)	-	1000	-
5.4(a) pattern 2 pipette of 1 and 2ml )	-	500	-
5.4(b) Other pipettes)	-	1000	-
5.4(v) Dia. of safety bulb (if provided ))	-	500	-
5.4(vi)Distance from top of pipette to bottom of safety bulb )	-	500	-
5.4(vii) Overall length, L)	-	500	-
5.4(viii) Length of suction tube, L1 )	-	500	-
5.4(ix) Length of delivery tube, L2 )	-	500	-
5.4(x) Internal dia. of suction tube D1 )	-	500	-
5.4(xi) External dia. of bulb D2 )	-	500	-
5.4(xii) External dia. of delivery tube D3 )	-	500	-
5.5(Delivery Time)	-	1000	-
5.5(Delivery Time)	-	0	-
5.6&7(Graduation line & Visibility )	-	1000	-
6.1.2(Marking)	-	500	-
6.1.1&3(Marking)	-	500	-
3(Class of Accuracy)	-	0	Repeated Clause.
4.1(Nominal capacities)	-	0	Repeated Clause.
4.2(Accuracy)	-	0	Repeated Clause.
5.1(Material)	-	0	Repeated Clause.
5.1(Material)	-	0	Repeated Clause.
5.1.1(Limit of Alkalinity)	-	0	Repeated Clause.
5.2(Pattern of Pipette)	-	0	Repeated Clause.
5.3(Workmanship & Finish)	-	0	Repeated Clause.
5.4(i) Distance of graduation line from top of pipette.)	-	0	Repeated Clause.
5.4(ii) Distance from graduation line to top of bulb(pattern 2))	-	0	Repeated Clause.
5.4(iii)Distance from graduation line to tip of jet (Pattern 1))	-	0	Repeated Clause.
5.4(iv) Wall thickness)	-	0	Repeated Clause.
5.4(a) pattern 2 pipette of 1 and 2ml )	-	0	Repeated Clause.
5.4(b) Other pipettes)	-	0	Repeated Clause.
5.4(v) Dia. of safety bulb (if provided ))	-	0	Repeated Clause.
5.4(vi)Distance from top of pipette to bottom of safety bulb )	-	0	Repeated Clause.
5.4(vii) Overall length, L)	-	0	Repeated Clause.
5.4(viii) Length of suction tube, L1 )	-	0	Repeated Clause.
5.4(ix) Length of delivery tube, L2 )	-	0	Repeated Clause.
5.4(x) Internal dia. of suction tube D1 )	-	0	Repeated Clause.
5.4(xi) External dia. of bulb D2 )	-	0	Repeated Clause.
5.4(xii) External dia. of delivery tube D3 )	-	0	Repeated Clause.
5.5(Delivery Time)	-	0	Repeated Clause.
5.5(Delivery Time)	-	0	Repeated Clause.
5.6&7(Graduation line & Visibility )	-	0	Repeated Clause.
6.1.2(Marking)	-	0	Repeated Clause.
3(Class of Accuracy)	-	0	Repeated Clause.
4.1(Nominal capacities)	-	0	Repeated Clause.
4.2(Accuracy)	-	0	Repeated Clause.
5.1(Material)	-	0	Repeated Clause.
5.1(Material)	-	0	Repeated Clause.
5.1.1(Limit of Alkalinity)	-	0	Repeated Clause.
5.2(Pattern of Pipette)	-	0	Repeated Clause.
5.3(Workmanship & Finish)	-	0	Repeated Clause.
5.4(i) Distance of graduation line from top of pipette.)	-	0	Repeated Clause.
5.4(ii) Distance from graduation line to top of bulb(pattern 2))	-	0	Repeated Clause.
5.4(iii)Distance from graduation line to tip of jet (Pattern 1))	-	0	Repeated Clause.
5.4(iv) Wall thickness)	-	0	Repeated Clause.
5.4(a) pattern 2 pipette of 1 and 2ml )	-	0	Repeated Clause.
5.4(b) Other pipettes)	-	0	Repeated Clause.
5.4(v) Dia. of safety bulb (if provided ))	-	0	Repeated Clause.
5.4(vi)Distance from top of pipette to bottom of safety bulb )	-	0	Repeated Clause.
5.4(vii) Overall length, L)	-	0	Repeated Clause.
5.4(viii) Length of suction tube, L1 )	-	0	Repeated Clause.
5.4(ix) Length of delivery tube, L2 )	-	0	Repeated Clause.
5.4(x) Internal dia. of suction tube D1 )	-	0	Repeated Clause.
5.4(xi) External dia. of bulb D2 )	-	0	Repeated Clause.
5.4(xii) External dia. of delivery tube D3 )	-	0	Repeated Clause.
5.5(Delivery Time)	-	0	Repeated Clause.
5.5(Delivery Time)	-	0	Repeated Clause.
5.6&7(Graduation line & Visibility )	-	0	Repeated Clause.
6.1.2(Marking)	-	0	Repeated Clause.
4.1(unit of volume)	-	0	Repeated Clause.
4.2(delivery volume)	-	0	Repeated Clause.
4.3(reference temperature)	-	0	Repeated Clause.
5.1(Types and Classes of accuracy)	-	0	Repeated Clause.
5.2(Types of single- volume pipette)	-	0	Repeated Clause.
Clause- 6.0(Maximum Permissible error)	-	0	Repeated Clause.
7.1(Material)	-	0	Repeated Clause.
7.2(Shape)	-	0	Repeated Clause.
7.3(Bulb)	-	0	Repeated Clause.
7.4(Dimensions)	-	0	Repeated Clause.
7.5(Top of Pipette)	-	0	Repeated Clause.
7.6(Delivery Jet)	-	0	Repeated Clause.
7.7(Delivery Time)	-	0	Repeated Clause.
7.8(Waiting Time)	-	0	Repeated Clause.
Clause- 8.0(Graduation Line)	-	0	Repeated Clause.
Clause- 9.0(Setting of the Meniscus)	-	0	Repeated Clause.
Clause-10.0(Marking)	-	0	Repeated Clause.
6.1.1&3(Marking)	-	0	Repeated Clause.
6.1.1&3(Marking)	-	0	Repeated Clause.
3(Class of Accuracy)	-	0	Repeated Clause.
4.1(Nominal capacities)	-	0	Repeated Clause.
4.2(Accuracy)	-	0	Repeated Clause.
5.1.1(Limit of Alkalinity)	-	0	Repeated Clause.
5.1(Material)	-	0	Repeated Clause.
5.1(Material)	-	0	Repeated Clause.
5.2(Pattern of Pipette)	-	0	Repeated Clause.
5.3(Workmanship & Finish)	-	0	Repeated Clause.
5.4(i) Distance of graduation line from top of pipette.)	-	0	Repeated Clause.
5.4(ii) Distance from graduation line to top of bulb(pattern 2))	-	0	Repeated Clause.
5.4(iii)Distance from graduation line to tip of jet (Pattern 1))	-	0	Repeated Clause.
5.4(iv) Wall thickness)	-	0	Repeated Clause.
5.4(a) pattern 2 pipette of 1 and 2ml )	-	0	Repeated Clause.
5.4(b) Other pipettes)	-	0	Repeated Clause.
5.4(v) Dia. of safety bulb (if provided ))	-	0	Repeated Clause.
5.4(vi)Distance from top of pipette to bottom of safety bulb )	-	0	Repeated Clause.
5.4(vii) Overall length, L)	-	0	Repeated Clause.
5.4(viii) Length of suction tube, L1 )	-	0	Repeated Clause.
5.4(ix) Length of delivery tube, L2 )	-	0	Repeated Clause.
5.4(x) Internal dia. of suction tube D1 )	-	0	Repeated Clause.
5.4(xi) External dia. of bulb D2 )	-	0	Repeated Clause.
5.4(xii) External dia. of delivery tube D3 )	-	0	Repeated Clause.
5.5(Delivery Time)	-	0	Repeated Clause.
5.5(Delivery Time)	-	0	Repeated Clause.
5.6&7(Graduation line & Visibility )	-	0	Repeated Clause.
6.1.2(Marking)	-	0	Repeated Clause.
6.1.1&3(Marking)	-	0	Repeated Clause.
3(Class of Accuracy)	-	0	Repeated Clause.
4.1(Nominal capacities)	-	0	Repeated Clause.
4.2(Accuracy)	-	0	Repeated Clause.
5.1(Material)	-	0	Repeated Clause.
5.1(Material)	-	0	Repeated Clause.
5.1.1(Limit of Alkalinity)	-	0	Repeated Clause.
5.2(Pattern of Pipette)	-	0	Repeated Clause.
5.3(Workmanship & Finish)	-	0	Repeated Clause.
5.4(i) Distance of graduation line from top of pipette.)	-	0	Repeated Clause.
5.4(ii) Distance from graduation line to top of bulb(pattern 2))	-	0	Repeated Clause.
5.4(iii)Distance from graduation line to tip of jet (Pattern 1))	-	0	Repeated Clause.
5.4(iv) Wall thickness)	-	0	Repeated Clause.
5.4(a) pattern 2 pipette of 1 and 2ml )	-	0	Repeated Clause.
5.4(b) Other pipettes)	-	0	Repeated Clause.
5.4(v) Dia. of safety bulb (if provided ))	-	0	Repeated Clause.
5.4(vi)Distance from top of pipette to bottom of safety bulb )	-	0	Repeated Clause.
5.4(vii) Overall length, L)	-	0	Repeated Clause.
5.4(viii) Length of suction tube, L1 )	-	0	Repeated Clause.
5.4(ix) Length of delivery tube, L2 )	-	0	Repeated Clause.
5.4(x) Internal dia. of suction tube D1 )	-	0	Repeated Clause.
5.4(xi) External dia. of bulb D2 )	-	0	Repeated Clause.
5.4(xii) External dia. of delivery tube D3 )	-	0	Repeated Clause.
5.5(Delivery Time)	-	0	v
5.5(Delivery Time)	-	0	Repeated Clause.
5.6&7(Graduation line & Visibility )	-	0	Repeated Clause.
6.1.2(Marking)	-	0	v
3(Class of Accuracy)	-	0	Repeated Clause.
4.1(Nominal capacities)	-	0	Repeated Clause.
4.2(Accuracy)	-	0	Repeated Clause.
5.1(Material)	-	0	Repeated Clause.
5.1(Material)	-	0	Repeated Clause.
5.1.1(Limit of Alkalinity)	-	0	Repeated Clause.
5.2(Pattern of Pipette)	-	0	Repeated Clause.
5.3(Workmanship & Finish)	-	0	Repeated Clause.
5.4(i) Distance of graduation line from top of pipette.)	-	0	Repeated Clause.
5.4(ii) Distance from graduation line to top of bulb(pattern 2))	-	0	Repeated Clause.
5.4(iii)Distance from graduation line to tip of jet (Pattern 1))	-	0	Repeated Clause.
5.4(iv) Wall thickness)	-	0	Repeated Clause.
5.4(a) pattern 2 pipette of 1 and 2ml )	-	0	Repeated Clause.
5.4(b) Other pipettes)	-	0	Repeated Clause.
5.4(v) Dia. of safety bulb (if provided ))	-	0	Repeated Clause.
5.4(vi)Distance from top of pipette to bottom of safety bulb )	-	0	Repeated Clause.
5.4(vii) Overall length, L)	-	0	Repeated Clause.
5.4(vii) Overall length, L)	-	0	Repeated Clause.
5.4(viii) Length of suction tube, L1 )	-	0	Repeated Clause.
5.4(ix) Length of delivery tube, L2 )	-	0	Repeated Clause.
5.4(ix) Length of delivery tube, L2 )	-	0	Repeated Clause.
5.4(x) Internal dia. of suction tube D1 )	-	0	Repeated Clause.
5.4(xi) External dia. of bulb D2 )	-	0	Repeated Clause.
5.4(xi) External dia. of bulb D2 )	-	0	Repeated Clause.
5.4(xii) External dia. of delivery tube D3 )	-	0	Repeated Clause.
5.5(Delivery Time)	-	0	Repeated Clause.
5.5(Delivery Time)	-	0	Repeated Clause.
5.5(Delivery Time)	-	0	Repeated Clause.
5.5(Delivery Time)	-	0	Repeated Clause.
5.6&7(Graduation line & Visibility )	-	0	Repeated Clause.
6.1.2(Marking)	-	0	Repeated Clause.
6.1.2(Marking)	-	0	Repeated Clause.
4.1(unit of volume)	-	0	Repeated Clause.
4.2(delivery volume)	-	0	Repeated Clause.
4.3(reference temperature)	-	0	Repeated Clause.
5.1(Types and Classes of accuracy)	-	0	Repeated Clause.
5.1(Types and Classes of accuracy)	-	0	Repeated Clause.
5.2(Types of single- volume pipette)	-	0	Repeated Clause.
5.2(Types of single- volume pipette)	-	0	Repeated Clause.
Clause- 6.0(Maximum Permissible error)	-	0	Repeated Clause.
7.1(Material)	-	0	Repeated Clause.
7.1(Material)	-	0	Repeated Clause.
7.2(Shape)	-	0	Repeated Clause.
7.2(Shape)	-	0	Repeated Clause.
7.3(Bulb)	-	0	Repeated Clause.
7.4(Dimensions)	-	0	Repeated Clause.
7.4(Dimensions)	-	0	Repeated Clause.
7.5(Top of Pipette)	-	0	v
7.5(Top of Pipette)	-	0	Repeated Clause.
7.6(Delivery Jet)	-	0	Repeated Clause.
7.6(Delivery Jet)	-	0	Repeated Clause.
7.7(Delivery Time)	-	0	Repeated Clause.
7.7(Delivery Time)	-	0	Repeated Clause.
7.8(Waiting Time)	-	0	v
Clause- 8.0(Graduation Line)	-	0	Repeated Clause.
Clause- 8.0(Graduation Line)	-	0	Repeated Clause.
Clause- 9.0(Setting of the Meniscus)	-	0	Repeated Clause.
Clause-10.0(Marking)	-	0	Repeated Clause.
Clause-10.0(Marking)	-	0	Repeated Clause.
6.1.1&3(Marking)	-	0	Repeated Clause.
6.1.1&3(Marking)	-	0	Repeated Clause.
6.1.1&3(Marking)	-	0	Repeated Clause.
3(Class of Accuracy)	-	0	Repeated Clause.
4.1(Nominal capacities)	-	0	Repeated Clause.
4.2(Accuracy)	-	0	Repeated Clause.
5.1.1(Limit of Alkalinity)	-	0	Repeated Clause.
5.1(Material)	-	0	Repeated Clause.
5.1(Material)	-	0	Repeated Clause.
5.2(Pattern of Pipette)	-	0	Repeated Clause.
5.3(Workmanship & Finish)	-	0	Repeated Clause.
5.4(i) Distance of graduation line from top of pipette.)	-	0	Repeated Clause.
5.4(ii) Distance from graduation line to top of bulb(pattern 2))	-	0	Repeated Clause.
5.4(iii)Distance from graduation line to tip of jet (Pattern 1))	-	0	Repeated Clause.
5.4(iv) Wall thickness)	-	0	Repeated Clause.
5.4(a) pattern 2 pipette of 1 and 2ml )	-	0	Repeated Clause.
5.4(b) Other pipettes)	-	0	Repeated Clause.
5.4(v) Dia. of safety bulb (if provided ))	-	0	Repeated Clause.
5.4(vi)Distance from top of pipette to bottom of safety bulb )	-	0	Repeated Clause.
5.4(vii) Overall length, L)	-	0	Repeated Clause.
5.4(viii) Length of suction tube, L1 )	-	0	Repeated Clause.
5.4(ix) Length of delivery tube, L2 )	-	0	Repeated Clause.
5.4(x) Internal dia. of suction tube D1 )	-	0	Repeated Clause.
5.4(xi) External dia. of bulb D2 )	-	0	Repeated Clause.
5.4(xii) External dia. of delivery tube D3 )	-	0	Repeated Clause.
5.5(Delivery Time)	-	0	Repeated Clause.
5.5(Delivery Time)	-	0	Repeated Clause.
5.6&7(Graduation line & Visibility )	-	0	Repeated Clause.
6.1.2(Marking)	-	0	Repeated Clause.
6.1.1&3(Marking)	-	0	Repeated Clause.
3(Class of Accuracy)	-	0	Repeated Clause.
4.1(Nominal capacities)	-	0	Repeated Clause.
4.2(Accuracy)	-	0	Repeated Clause.
5.1(Material)	-	0	Repeated Clause.
5.1(Material)	-	0	Repeated Clause.
5.1.1(Limit of Alkalinity)	-	0	Repeated Clause.
5.2(Pattern of Pipette)	-	0	Repeated Clause.
5.3(Workmanship & Finish)	-	0	Repeated Clause.
5.4(i) Distance of graduation line from top of pipette.)	-	0	Repeated Clause.
5.4(ii) Distance from graduation line to top of bulb(pattern 2))	-	0	Repeated Clause.
5.4(iii)Distance from graduation line to tip of jet (Pattern 1))	-	0	Repeated Clause.
5.4(iv) Wall thickness)	-	0	Repeated Clause.
5.4(a) pattern 2 pipette of 1 and 2ml )	-	0	Repeated Clause.
5.4(b) Other pipettes)	-	0	Repeated Clause.
5.4(v) Dia. of safety bulb (if provided ))	-	0	Repeated Clause.
5.4(vi)Distance from top of pipette to bottom of safety bulb )	-	0	Repeated Clause.
5.4(vii) Overall length, L)	-	0	Repeated Clause.
5.4(viii) Length of suction tube, L1 )	-	0	Repeated Clause.
5.4(ix) Length of delivery tube, L2 )	-	0	Repeated Clause.
5.4(x) Internal dia. of suction tube D1 )	-	0	Repeated Clause.
5.4(xi) External dia. of bulb D2 )	-	0	Repeated Clause.
5.4(xii) External dia. of delivery tube D3 )	-	0	Repeated Clause.
5.5(Delivery Time)	-	0	Repeated Clause.
5.5(Delivery Time)	-	0	Repeated Clause.
5.6&7(Graduation line & Visibility )	-	0	Repeated Clause.
6.1.2(Marking)	-	0	Repeated Clause.
3(Class of Accuracy)	-	0	Repeated Clause.
4.1(Nominal capacities)	-	0	Repeated Clause.
4.2(Accuracy)	-	0	Repeated Clause.
5.1(Material)	-	0	Repeated Clause.
5.1(Material)	-	0	Repeated Clause.
5.1.1(Limit of Alkalinity)	-	0	Repeated Clause.
5.2(Pattern of Pipette)	-	0	Repeated Clause.
5.3(Workmanship & Finish)	-	0	Repeated Clause.
5.4(i) Distance of graduation line from top of pipette.)	-	0	Repeated Clause.
5.4(ii) Distance from graduation line to top of bulb(pattern 2))	-	0	Repeated Clause.
5.4(iii)Distance from graduation line to tip of jet (Pattern 1))	-	0	Repeated Clause.
5.4(iv) Wall thickness)	-	0	Repeated Clause.
5.4(a) pattern 2 pipette of 1 and 2ml )	-	0	Repeated Clause.
5.4(b) Other pipettes)	-	0	Repeated Clause.
5.4(v) Dia. of safety bulb (if provided ))	-	0	Repeated Clause.
5.4(vi)Distance from top of pipette to bottom of safety bulb )	-	0	Repeated Clause.
5.4(vii) Overall length, L)	-	0	Repeated Clause.
5.4(viii) Length of suction tube, L1 )	-	0	Repeated Clause.
5.4(ix) Length of delivery tube, L2 )	-	0	Repeated Clause.
5.4(x) Internal dia. of suction tube D1 )	-	0	Repeated Clause.
5.4(xi) External dia. of bulb D2 )	-	0	Repeated Clause.
5.4(xii) External dia. of delivery tube D3 )	-	0	Repeated Clause.
5.5(Delivery Time)	-	0	Repeated Clause.
5.5(Delivery Time)	-	0	Repeated Clause.
5.6&7(Graduation line & Visibility )	-	0	Repeated Clause.
6.1.2(Marking)	-	0	Repeated Clause.
4.1(unit of volume)	-	0	Repeated Clause.
4.2(delivery volume)	-	0	Repeated Clause.
4.3(reference temperature)	-	0	Repeated Clause.
5.1(Types and Classes of accuracy)	-	0	Repeated Clause.
5.2(Types of single- volume pipette)	-	0	Repeated Clause.
Clause- 6.0(Maximum Permissible error)	-	0	Repeated Clause.
7.1(Material)	-	0	Repeated Clause.
7.2(Shape)	-	0	Repeated Clause.
7.3(Bulb)	-	0	Repeated Clause.
7.4(Dimensions)	-	0	Repeated Clause.
7.5(Top of Pipette)	-	0	Repeated Clause.
7.6(Delivery Jet)	-	0	Repeated Clause.
7.7(Delivery Time)	-	0	Repeated Clause.
7.8(Waiting Time)	-	0	Repeated Clause.
Clause- 8.0(Graduation Line)	-	0	Repeated Clause.
Clause- 9.0(Setting of the Meniscus)	-	0	Repeated Clause.
Clause-10.0(Marking)	-	0	Repeated Clause.
6.1.1&3(Marking)	-	0	Repeated Clause.

-
Included w.e.f 30.04.2025

8214

Sleen India Biz venture Private Limited, Agra

9139736

IS 2619 (2018)

Glass beakers - Specification (Third Revision)

Low form beaker and tall form with spout

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5 Capacity (a)overflow of capacity of a beaker shall exceed the nominal capacity by at least 5 %;)	-	500	-
Cl.5 Capacity (b) Distance between the levels corresponding to the nominal and overflow capacities shall be at least 10 mm.)	-	500	-
Cl.6 Material(Beakers shall be made of borosilicate glass 3.3 in accordance with ISO 3585. The glass shall be reasonably free from residual strain and from visible glass defects which might impair the safety and performance of the beaker.)	-	0	-
Cl.7.1 Dimensions(Low-form and tall-form beakers shall observe the dimensions specified in Table 1 and thick-walled beakers the dimensions specifed in Table 2. The tolerances on the external diameter shall be ±5 % of the value given in the tables.)	-	1000	-
Cl.7.2 Radius at base(Beakers having a nominal capacity of 250 ml or greater shall have an external radius at the junction between the base and the side of 10 % to 20 % of the external diameter.)	-	1000	-
Cl.7.3 Wall thickness(Substantial local irregularities from the minimum values for wall thickness given in the tables shall be avoided. That means, the minimum wall thickness shall fall at no place below the values given in Table 1 and Table 2 and the beakers shall comply with the requirement for thermal shock endurance specified in 8.5.)	-	500	-
Cl.8.1 Base(The design of the base shall enable the beaker to stand vertically on a plane horizontal surface without spinning or rocking)	-	500	-
8.2 Upper edge(The side of the beaker shall be slightly flared near the brim in a smooth and regular curve. The diameter of the brim shall be of the order of 5 % to 15 % greater than the diameter of the body. The edge of the brim shall be finished in a plane parallel with that of the horizontal base.)	-	500	-
Cl. 8.3 Spout(The spout shall be shaped so that, when the beaker is filled with water, the water may be poured in a regular stream clear of the side of the beaker. When the beaker is placed on a horizontal surface and filling is continued beyond its overflow capacity, the water shall first overflow from the spout and not from any other part of the brim.)	-	500	-
Cl.8.4 Scale(Beakers may be provided with a scale, which should approximately indicate the volume contained in the beaker.)	-	500	-
Cl.8.5 Thermal shock resistance(Beakers shall have a thermal shock resistance of 160 °C when tested in accordance with ISO 718.)	-	2000	-
Cl.5 Capacity (a)overflow of capacity of a beaker shall exceed the nominal capacity by at least 5 %;)	-	0	Repeated Clause
Cl.5 Capacity (b) Distance between the levels corresponding to the nominal and overflow capacities shall be at least 10 mm.)	-	0	Repeated Clause
Cl.6 Material(Beakers shall be made of borosilicate glass 3.3 in accordance with ISO 3585. The glass shall be reasonably free from residual strain and from visible glass defects which might impair the safety and performance of the beaker.)	-	0	Repeated Clause
Cl.7.1 Dimensions(Low-form and tall-form beakers shall observe the dimensions specified in Table 1 and thick-walled beakers the dimensions specifed in Table 2. The tolerances on the external diameter shall be ±5 % of the value given in the tables.)	-	0	Repeated Clause
Cl.7.2 Radius at base(Beakers having a nominal capacity of 250 ml or greater shall have an external radius at the junction between the base and the side of 10 % to 20 % of the external diameter.)	-	0	Repeated Clause
Cl.7.2 Radius at base(Beakers having a nominal capacity less than 250 ml shall have a minimum radius at the junction between the base and the side of 5 % of the external diameter.)	-	0	Repeated Clause
Cl.7.3 Wall thickness(Substantial local irregularities from the minimum values for wall thickness given in the tables shall be avoided. That means, the minimum wall thickness shall fall at no place below the values given in Table 1 and Table 2 and the beakers shall comply with the requirement for thermal shock endurance specified in 8.5.)	-	0	Repeated Clause
Cl.8.1 Base(The design of the base shall enable the beaker to stand vertically on a plane horizontal surface without spinning or rocking)	-	0	Repeated Clause
8.2 Upper edge(The side of the beaker shall be slightly flared near the brim in a smooth and regular curve. The diameter of the brim shall be of the order of 5 % to 15 % greater than the diameter of the body. The edge of the brim shall be finished in a plane parallel with that of the horizontal base.)	-	0	Repeated Clause
Cl. 8.3 Spout(The spout shall be shaped so that, when the beaker is filled with water, the water may be poured in a regular stream clear of the side of the beaker. When the beaker is placed on a horizontal surface and filling is continued beyond its overflow capacity, the water shall first overflow from the spout and not from any other part of the brim.)	-	0	Repeated Clause
Cl.8.4 Scale(Beakers may be provided with a scale, which should approximately indicate the volume contained in the beaker.)	-	0	Repeated Clause
Cl.8.5 Thermal shock resistance(Beakers shall have a thermal shock resistance of 160 °C when tested in accordance with ISO 718.)	-	0	Repeated Clause
Cl.5 Capacity (a)overflow of capacity of a beaker shall exceed the nominal capacity by at least 5 %;)	-	0	Repeated Clause
Cl.5 Capacity (b) Distance between the levels corresponding to the nominal and overflow capacities shall be at least 10 mm.)	-	0	Repeated Clause
Cl.6 Material(Beakers shall be made of borosilicate glass 3.3 in accordance with ISO 3585. The glass shall be reasonably free from residual strain and from visible glass defects which might impair the safety and performance of the beaker.)	-	0	Repeated Clause
Cl.7.1 Dimensions(Low-form and tall-form beakers shall observe the dimensions specified in Table 1 and thick-walled beakers the dimensions specifed in Table 2. The tolerances on the external diameter shall be ±5 % of the value given in the tables.)	-	0	Repeated Clause
Cl.7.2 Radius at base(Beakers having a nominal capacity of 250 ml or greater shall have an external radius at the junction between the base and the side of 10 % to 20 % of the external diameter.)	-	0	Repeated Clause
Cl.7.2 Radius at base(Beakers having a nominal capacity less than 250 ml shall have a minimum radius at the junction between the base and the side of 5 % of the external diameter.)	-	0	Repeated Clause
Cl.7.3 Wall thickness(Substantial local irregularities from the minimum values for wall thickness given in the tables shall be avoided. That means, the minimum wall thickness shall fall at no place below the values given in Table 1 and Table 2 and the beakers shall comply with the requirement for thermal shock endurance specified in 8.5.)	-	0	Repeated Clause
Cl.8.1 Base(The design of the base shall enable the beaker to stand vertically on a plane horizontal surface without spinning or rocking)	-	0	Repeated Clause
8.2 Upper edge(The side of the beaker shall be slightly flared near the brim in a smooth and regular curve. The diameter of the brim shall be of the order of 5 % to 15 % greater than the diameter of the body. The edge of the brim shall be finished in a plane parallel with that of the horizontal base.)	-	0	Repeated Clause
Cl. 8.3 Spout(The spout shall be shaped so that, when the beaker is filled with water, the water may be poured in a regular stream clear of the side of the beaker. When the beaker is placed on a horizontal surface and filling is continued beyond its overflow capacity, the water shall first overflow from the spout and not from any other part of the brim.)	-	0	Repeated Clause
Cl.8.4 Scale(Beakers may be provided with a scale, which should approximately indicate the volume contained in the beaker.)	-	0	Repeated Clause
Cl.8.5 Thermal shock resistance(Beakers shall have a thermal shock resistance of 160 °C when tested in accordance with ISO 718.)	-	0	Repeated Clause
Cl.7.2 Radius at base(Beakers having a nominal capacity less than 250 ml shall have a minimum radius at the junction between the base and the side of 5 % of the external diameter.)	-	0	Repeated Clause
Cl.5 Capacity (a)overflow of capacity of a beaker shall exceed the nominal capacity by at least 5 %;)	-	0	Repeated Clause
Cl.5 Capacity (b) Distance between the levels corresponding to the nominal and overflow capacities shall be at least 10 mm.)	-	0	Repeated Clause
Cl.6 Material(Beakers shall be made of borosilicate glass 3.3 in accordance with ISO 3585. The glass shall be reasonably free from residual strain and from visible glass defects which might impair the safety and performance of the beaker.)	-	0	Repeated Clause
Cl.7.1 Dimensions(Low-form and tall-form beakers shall observe the dimensions specified in Table 1 and thick-walled beakers the dimensions specifed in Table 2. The tolerances on the external diameter shall be ±5 % of the value given in the tables.)	-	0	Repeated Clause
Cl.7.2 Radius at base(Beakers having a nominal capacity of 250 ml or greater shall have an external radius at the junction between the base and the side of 10 % to 20 % of the external diameter.)	-	0	Repeated Clause
Cl.7.3 Wall thickness(Substantial local irregularities from the minimum values for wall thickness given in the tables shall be avoided. That means, the minimum wall thickness shall fall at no place below the values given in Table 1 and Table 2 and the beakers shall comply with the requirement for thermal shock endurance specified in 8.5.)	-	0	Repeated Clause
Cl.8.1 Base(The design of the base shall enable the beaker to stand vertically on a plane horizontal surface without spinning or rocking)	-	0	Repeated Clause
8.2 Upper edge(The side of the beaker shall be slightly flared near the brim in a smooth and regular curve. The diameter of the brim shall be of the order of 5 % to 15 % greater than the diameter of the body. The edge of the brim shall be finished in a plane parallel with that of the horizontal base.)	-	0	Repeated Clause
Cl. 8.3 Spout(The spout shall be shaped so that, when the beaker is filled with water, the water may be poured in a regular stream clear of the side of the beaker. When the beaker is placed on a horizontal surface and filling is continued beyond its overflow capacity, the water shall first overflow from the spout and not from any other part of the brim.)	-	0	Repeated Clause
Cl.8.4 Scale(Beakers may be provided with a scale, which should approximately indicate the volume contained in the beaker.)	-	0	Repeated Clause
Cl.8.5 Thermal shock resistance(Beakers shall have a thermal shock resistance of 160 °C when tested in accordance with ISO 718.)	-	0	Repeated Clause
Cl.5 Capacity (a)overflow of capacity of a beaker shall exceed the nominal capacity by at least 5 %;)	-	0	Repeated Clause
Cl.5 Capacity (b) Distance between the levels corresponding to the nominal and overflow capacities shall be at least 10 mm.)	-	0	Repeated Clause
Cl.6 Material(Beakers shall be made of borosilicate glass 3.3 in accordance with ISO 3585. The glass shall be reasonably free from residual strain and from visible glass defects which might impair the safety and performance of the beaker.)	-	0	Repeated Clause
Cl.7.1 Dimensions(Low-form and tall-form beakers shall observe the dimensions specified in Table 1 and thick-walled beakers the dimensions specifed in Table 2. The tolerances on the external diameter shall be ±5 % of the value given in the tables.)	-	0	Repeated Clause
Cl.7.2 Radius at base(Beakers having a nominal capacity of 250 ml or greater shall have an external radius at the junction between the base and the side of 10 % to 20 % of the external diameter.)	-	0	Repeated Clause
Cl.7.2 Radius at base(Beakers having a nominal capacity less than 250 ml shall have a minimum radius at the junction between the base and the side of 5 % of the external diameter.)	-	0	Repeated Clause
Cl.7.3 Wall thickness(Substantial local irregularities from the minimum values for wall thickness given in the tables shall be avoided. That means, the minimum wall thickness shall fall at no place below the values given in Table 1 and Table 2 and the beakers shall comply with the requirement for thermal shock endurance specified in 8.5.)	-	0	Repeated Clause
Cl.8.1 Base(The design of the base shall enable the beaker to stand vertically on a plane horizontal surface without spinning or rocking)	-	0	Repeated Clause
8.2 Upper edge(The side of the beaker shall be slightly flared near the brim in a smooth and regular curve. The diameter of the brim shall be of the order of 5 % to 15 % greater than the diameter of the body. The edge of the brim shall be finished in a plane parallel with that of the horizontal base.)	-	0	Repeated Clause
Cl. 8.3 Spout(The spout shall be shaped so that, when the beaker is filled with water, the water may be poured in a regular stream clear of the side of the beaker. When the beaker is placed on a horizontal surface and filling is continued beyond its overflow capacity, the water shall first overflow from the spout and not from any other part of the brim.)	-	0	Repeated Clause
Cl.8.4 Scale(Beakers may be provided with a scale, which should approximately indicate the volume contained in the beaker.)	-	0	Repeated Clause
Cl.8.5 Thermal shock resistance(Beakers shall have a thermal shock resistance of 160 °C when tested in accordance with ISO 718.)	-	0	Repeated Clause
Cl.5 Capacity (a)overflow of capacity of a beaker shall exceed the nominal capacity by at least 5 %;)	-	0	Repeated Clause
Cl.5 Capacity (b) Distance between the levels corresponding to the nominal and overflow capacities shall be at least 10 mm.)	-	0	Repeated Clause
Cl.6 Material(Beakers shall be made of borosilicate glass 3.3 in accordance with ISO 3585. The glass shall be reasonably free from residual strain and from visible glass defects which might impair the safety and performance of the beaker.)	-	0	Repeated Clause
Cl.7.1 Dimensions(Low-form and tall-form beakers shall observe the dimensions specified in Table 1 and thick-walled beakers the dimensions specifed in Table 2. The tolerances on the external diameter shall be ±5 % of the value given in the tables.)	-	0	Repeated Clause
Cl.7.2 Radius at base(Beakers having a nominal capacity of 250 ml or greater shall have an external radius at the junction between the base and the side of 10 % to 20 % of the external diameter.)	-	0	Repeated Clause
Cl.7.2 Radius at base(Beakers having a nominal capacity less than 250 ml shall have a minimum radius at the junction between the base and the side of 5 % of the external diameter.)	-	0	Repeated Clause
Cl.7.3 Wall thickness(Substantial local irregularities from the minimum values for wall thickness given in the tables shall be avoided. That means, the minimum wall thickness shall fall at no place below the values given in Table 1 and Table 2 and the beakers shall comply with the requirement for thermal shock endurance specified in 8.5.)	-	0	Repeated Clause
Cl.8.1 Base(The design of the base shall enable the beaker to stand vertically on a plane horizontal surface without spinning or rocking)	-	0	Repeated Clause
8.2 Upper edge(The side of the beaker shall be slightly flared near the brim in a smooth and regular curve. The diameter of the brim shall be of the order of 5 % to 15 % greater than the diameter of the body. The edge of the brim shall be finished in a plane parallel with that of the horizontal base.)	-	0	Repeated Clause
Cl. 8.3 Spout(The spout shall be shaped so that, when the beaker is filled with water, the water may be poured in a regular stream clear of the side of the beaker. When the beaker is placed on a horizontal surface and filling is continued beyond its overflow capacity, the water shall first overflow from the spout and not from any other part of the brim.)	-	0	Repeated Clause
Cl.8.4 Scale(Beakers may be provided with a scale, which should approximately indicate the volume contained in the beaker.)	-	0	Repeated Clause
Cl.8.5 Thermal shock resistance(Beakers shall have a thermal shock resistance of 160 °C when tested in accordance with ISO 718.)	-	0	Repeated Clause
Cl.7.2 Radius at base(Beakers having a nominal capacity less than 250 ml shall have a minimum radius at the junction between the base and the side of 5 % of the external diameter.)	-	0	Repeated Clause
Cl.5 Capacity (a)overflow of capacity of a beaker shall exceed the nominal capacity by at least 5 %;)	-	0	Repeated Clause
Cl.5 Capacity (b) Distance between the levels corresponding to the nominal and overflow capacities shall be at least 10 mm.)	-	0	Repeated Clause
Cl.6 Material(Beakers shall be made of borosilicate glass 3.3 in accordance with ISO 3585. The glass shall be reasonably free from residual strain and from visible glass defects which might impair the safety and performance of the beaker.)	-	0	Repeated Clause
Cl.7.1 Dimensions(Low-form and tall-form beakers shall observe the dimensions specified in Table 1 and thick-walled beakers the dimensions specifed in Table 2. The tolerances on the external diameter shall be ±5 % of the value given in the tables.)	-	0	Repeated Clause
Cl.7.2 Radius at base(Beakers having a nominal capacity of 250 ml or greater shall have an external radius at the junction between the base and the side of 10 % to 20 % of the external diameter.)	-	0	Repeated Clause
Cl.7.3 Wall thickness(Substantial local irregularities from the minimum values for wall thickness given in the tables shall be avoided. That means, the minimum wall thickness shall fall at no place below the values given in Table 1 and Table 2 and the beakers shall comply with the requirement for thermal shock endurance specified in 8.5.)	-	0	Repeated Clause
Cl.8.1 Base(The design of the base shall enable the beaker to stand vertically on a plane horizontal surface without spinning or rocking)	-	0	Repeated Clause
8.2 Upper edge(The side of the beaker shall be slightly flared near the brim in a smooth and regular curve. The diameter of the brim shall be of the order of 5 % to 15 % greater than the diameter of the body. The edge of the brim shall be finished in a plane parallel with that of the horizontal base.)	-	0	Repeated Clause
Cl. 8.3 Spout(The spout shall be shaped so that, when the beaker is filled with water, the water may be poured in a regular stream clear of the side of the beaker. When the beaker is placed on a horizontal surface and filling is continued beyond its overflow capacity, the water shall first overflow from the spout and not from any other part of the brim.)	-	0	Repeated Clause
Cl.8.4 Scale(Beakers may be provided with a scale, which should approximately indicate the volume contained in the beaker.)	-	0	Repeated Clause
Cl.8.5 Thermal shock resistance(Beakers shall have a thermal shock resistance of 160 °C when tested in accordance with ISO 718.)	-	0	Repeated Clause
Cl.5 Capacity (a)overflow of capacity of a beaker shall exceed the nominal capacity by at least 5 %;)	-	0	Repeated Clause
Cl.5 Capacity (b) Distance between the levels corresponding to the nominal and overflow capacities shall be at least 10 mm.)	-	0	Repeated Clause
Cl.6 Material(Beakers shall be made of borosilicate glass 3.3 in accordance with ISO 3585. The glass shall be reasonably free from residual strain and from visible glass defects which might impair the safety and performance of the beaker.)	-	0	Repeated Clause
Cl.7.1 Dimensions(Low-form and tall-form beakers shall observe the dimensions specified in Table 1 and thick-walled beakers the dimensions specifed in Table 2. The tolerances on the external diameter shall be ±5 % of the value given in the tables.)	-	0	Repeated Clause
Cl.7.2 Radius at base(Beakers having a nominal capacity of 250 ml or greater shall have an external radius at the junction between the base and the side of 10 % to 20 % of the external diameter.)	-	0	Repeated Clause
Cl.7.2 Radius at base(Beakers having a nominal capacity less than 250 ml shall have a minimum radius at the junction between the base and the side of 5 % of the external diameter.)	-	0	Repeated Clause
Cl.7.3 Wall thickness(Substantial local irregularities from the minimum values for wall thickness given in the tables shall be avoided. That means, the minimum wall thickness shall fall at no place below the values given in Table 1 and Table 2 and the beakers shall comply with the requirement for thermal shock endurance specified in 8.5.)	-	0	Repeated Clause
Cl.8.1 Base(The design of the base shall enable the beaker to stand vertically on a plane horizontal surface without spinning or rocking)	-	0	Repeated Clause
8.2 Upper edge(The side of the beaker shall be slightly flared near the brim in a smooth and regular curve. The diameter of the brim shall be of the order of 5 % to 15 % greater than the diameter of the body. The edge of the brim shall be finished in a plane parallel with that of the horizontal base.)	-	0	Repeated Clause
Cl. 8.3 Spout(The spout shall be shaped so that, when the beaker is filled with water, the water may be poured in a regular stream clear of the side of the beaker. When the beaker is placed on a horizontal surface and filling is continued beyond its overflow capacity, the water shall first overflow from the spout and not from any other part of the brim.)	-	0	Repeated Clause
Cl.8.4 Scale(Beakers may be provided with a scale, which should approximately indicate the volume contained in the beaker.)	-	0	Repeated Clause
Cl.8.5 Thermal shock resistance(Beakers shall have a thermal shock resistance of 160 °C when tested in accordance with ISO 718.)	-	0	Repeated Clause
Cl.5 Capacity (a)overflow of capacity of a beaker shall exceed the nominal capacity by at least 5 %;)	-	0	Repeated Clause
Cl.5 Capacity (b) Distance between the levels corresponding to the nominal and overflow capacities shall be at least 10 mm.)	-	0	Repeated Clause
Cl.6 Material(Beakers shall be made of borosilicate glass 3.3 in accordance with ISO 3585. The glass shall be reasonably free from residual strain and from visible glass defects which might impair the safety and performance of the beaker.)	-	0	Repeated Clause
Cl.7.1 Dimensions(Low-form and tall-form beakers shall observe the dimensions specified in Table 1 and thick-walled beakers the dimensions specifed in Table 2. The tolerances on the external diameter shall be ±5 % of the value given in the tables.)	-	0	Repeated Clause
Cl.7.2 Radius at base(Beakers having a nominal capacity of 250 ml or greater shall have an external radius at the junction between the base and the side of 10 % to 20 % of the external diameter.)	-	0	Repeated Clause
Cl.7.2 Radius at base(Beakers having a nominal capacity less than 250 ml shall have a minimum radius at the junction between the base and the side of 5 % of the external diameter.)	-	0	Repeated Clause
Cl.7.3 Wall thickness(Substantial local irregularities from the minimum values for wall thickness given in the tables shall be avoided. That means, the minimum wall thickness shall fall at no place below the values given in Table 1 and Table 2 and the beakers shall comply with the requirement for thermal shock endurance specified in 8.5.)	-	0	Repeated Clause
Cl.8.1 Base(The design of the base shall enable the beaker to stand vertically on a plane horizontal surface without spinning or rocking)	-	0	Repeated Clause
8.2 Upper edge(The side of the beaker shall be slightly flared near the brim in a smooth and regular curve. The diameter of the brim shall be of the order of 5 % to 15 % greater than the diameter of the body. The edge of the brim shall be finished in a plane parallel with that of the horizontal base.)	-	0	Repeated Clause
Cl. 8.3 Spout(The spout shall be shaped so that, when the beaker is filled with water, the water may be poured in a regular stream clear of the side of the beaker. When the beaker is placed on a horizontal surface and filling is continued beyond its overflow capacity, the water shall first overflow from the spout and not from any other part of the brim.)	-	0	Repeated Clause
Cl.8.4 Scale(Beakers may be provided with a scale, which should approximately indicate the volume contained in the beaker.)	-	0	Repeated Clause
Cl.8.5 Thermal shock resistance(Beakers shall have a thermal shock resistance of 160 °C when tested in accordance with ISO 718.)	-	0	Repeated Clause
Cl.7.2 Radius at base(Beakers having a nominal capacity less than 250 ml shall have a minimum radius at the junction between the base and the side of 5 % of the external diameter.)	-	0	Repeated Clause
Cl.5 Capacity (a)overflow of capacity of a beaker shall exceed the nominal capacity by at least 5 %;)	-	0	Repeated Clause
Cl.5 Capacity (b) Distance between the levels corresponding to the nominal and overflow capacities shall be at least 10 mm.)	-	0	Repeated Clause
Cl.6 Material(Beakers shall be made of borosilicate glass 3.3 in accordance with ISO 3585. The glass shall be reasonably free from residual strain and from visible glass defects which might impair the safety and performance of the beaker.)	-	0	Repeated Clause
Cl.7.1 Dimensions(Low-form and tall-form beakers shall observe the dimensions specified in Table 1 and thick-walled beakers the dimensions specifed in Table 2. The tolerances on the external diameter shall be ±5 % of the value given in the tables.)	-	0	Repeated Clause
Cl.7.2 Radius at base(Beakers having a nominal capacity of 250 ml or greater shall have an external radius at the junction between the base and the side of 10 % to 20 % of the external diameter.)	-	0	Repeated Clause
Cl.7.3 Wall thickness(Substantial local irregularities from the minimum values for wall thickness given in the tables shall be avoided. That means, the minimum wall thickness shall fall at no place below the values given in Table 1 and Table 2 and the beakers shall comply with the requirement for thermal shock endurance specified in 8.5.)	-	0	Repeated Clause
Cl.8.1 Base(The design of the base shall enable the beaker to stand vertically on a plane horizontal surface without spinning or rocking)	-	0	Repeated Clause
8.2 Upper edge(The side of the beaker shall be slightly flared near the brim in a smooth and regular curve. The diameter of the brim shall be of the order of 5 % to 15 % greater than the diameter of the body. The edge of the brim shall be finished in a plane parallel with that of the horizontal base.)	-	0	Repeated Clause
Cl. 8.3 Spout(The spout shall be shaped so that, when the beaker is filled with water, the water may be poured in a regular stream clear of the side of the beaker. When the beaker is placed on a horizontal surface and filling is continued beyond its overflow capacity, the water shall first overflow from the spout and not from any other part of the brim.)	-	0	Repeated Clause
Cl.8.4 Scale(Beakers may be provided with a scale, which should approximately indicate the volume contained in the beaker.)	-	0	Repeated Clause
Cl.8.5 Thermal shock resistance(Beakers shall have a thermal shock resistance of 160 °C when tested in accordance with ISO 718.)	-	0	Repeated Clause
Cl.5 Capacity (a)overflow of capacity of a beaker shall exceed the nominal capacity by at least 5 %;)	-	0	Repeated Clause
Cl.5 Capacity (b) Distance between the levels corresponding to the nominal and overflow capacities shall be at least 10 mm.)	-	0	Repeated Clause
Cl.6 Material(Beakers shall be made of borosilicate glass 3.3 in accordance with ISO 3585. The glass shall be reasonably free from residual strain and from visible glass defects which might impair the safety and performance of the beaker.)	-	0	Repeated Clause
Cl.7.1 Dimensions(Low-form and tall-form beakers shall observe the dimensions specified in Table 1 and thick-walled beakers the dimensions specifed in Table 2. The tolerances on the external diameter shall be ±5 % of the value given in the tables.)	-	0	Repeated Clause
Cl.7.2 Radius at base(Beakers having a nominal capacity of 250 ml or greater shall have an external radius at the junction between the base and the side of 10 % to 20 % of the external diameter.)	-	0	Repeated Clause
Cl.7.2 Radius at base(Beakers having a nominal capacity less than 250 ml shall have a minimum radius at the junction between the base and the side of 5 % of the external diameter.)	-	0	Repeated Clause
Cl.7.3 Wall thickness(Substantial local irregularities from the minimum values for wall thickness given in the tables shall be avoided. That means, the minimum wall thickness shall fall at no place below the values given in Table 1 and Table 2 and the beakers shall comply with the requirement for thermal shock endurance specified in 8.5.)	-	0	Repeated Clause
Cl.8.1 Base(The design of the base shall enable the beaker to stand vertically on a plane horizontal surface without spinning or rocking)	-	0	Repeated Clause
8.2 Upper edge(The side of the beaker shall be slightly flared near the brim in a smooth and regular curve. The diameter of the brim shall be of the order of 5 % to 15 % greater than the diameter of the body. The edge of the brim shall be finished in a plane parallel with that of the horizontal base.)	-	0	Repeated Clause
Cl. 8.3 Spout(The spout shall be shaped so that, when the beaker is filled with water, the water may be poured in a regular stream clear of the side of the beaker. When the beaker is placed on a horizontal surface and filling is continued beyond its overflow capacity, the water shall first overflow from the spout and not from any other part of the brim.)	-	0	Repeated Clause
Cl.8.4 Scale(Beakers may be provided with a scale, which should approximately indicate the volume contained in the beaker.)	-	0	Repeated Clause
Cl.8.5 Thermal shock resistance(Beakers shall have a thermal shock resistance of 160 °C when tested in accordance with ISO 718.)	-	0	Repeated Clause
Cl.5 Capacity (a)overflow of capacity of a beaker shall exceed the nominal capacity by at least 5 %;)	-	0	Repeated Clause
Cl.5 Capacity (b) Distance between the levels corresponding to the nominal and overflow capacities shall be at least 10 mm.)	-	0	Repeated Clause
Cl.6 Material(Beakers shall be made of borosilicate glass 3.3 in accordance with ISO 3585. The glass shall be reasonably free from residual strain and from visible glass defects which might impair the safety and performance of the beaker.)	-	0	Repeated Clause
Cl.7.1 Dimensions(Low-form and tall-form beakers shall observe the dimensions specified in Table 1 and thick-walled beakers the dimensions specifed in Table 2. The tolerances on the external diameter shall be ±5 % of the value given in the tables.)	-	0	Repeated Clause
Cl.7.2 Radius at base(Beakers having a nominal capacity of 250 ml or greater shall have an external radius at the junction between the base and the side of 10 % to 20 % of the external diameter.)	-	0	Repeated Clause
Cl.7.2 Radius at base(Beakers having a nominal capacity less than 250 ml shall have a minimum radius at the junction between the base and the side of 5 % of the external diameter.)	-	0	Repeated Clause
Cl.7.3 Wall thickness(Substantial local irregularities from the minimum values for wall thickness given in the tables shall be avoided. That means, the minimum wall thickness shall fall at no place below the values given in Table 1 and Table 2 and the beakers shall comply with the requirement for thermal shock endurance specified in 8.5.)	-	0	Repeated Clause
Cl.8.1 Base(The design of the base shall enable the beaker to stand vertically on a plane horizontal surface without spinning or rocking)	-	0	Repeated Clause
8.2 Upper edge(The side of the beaker shall be slightly flared near the brim in a smooth and regular curve. The diameter of the brim shall be of the order of 5 % to 15 % greater than the diameter of the body. The edge of the brim shall be finished in a plane parallel with that of the horizontal base.)	-	0	Repeated Clause
Cl. 8.3 Spout(The spout shall be shaped so that, when the beaker is filled with water, the water may be poured in a regular stream clear of the side of the beaker. When the beaker is placed on a horizontal surface and filling is continued beyond its overflow capacity, the water shall first overflow from the spout and not from any other part of the brim.)	-	0	Repeated Clause
Cl.8.4 Scale(Beakers may be provided with a scale, which should approximately indicate the volume contained in the beaker.)	-	0	Repeated Clause
Cl.8.5 Thermal shock resistance(Beakers shall have a thermal shock resistance of 160 °C when tested in accordance with ISO 718.)	-	0	Repeated Clause
Cl.7.2 Radius at base(Beakers having a nominal capacity less than 250 ml shall have a minimum radius at the junction between the base and the side of 5 % of the external diameter.)	-	0	Repeated Clause

-
Included w.e.f.31.07.2025 Exclusion Excluding: Cl.6 Material (Beakers shall be made of borosilicate glass 3.3 in accordance with ISO 3585. The glass shall be reasonably free from residual strain and from visible glass defects which might impair the safety and performance of the beaker.)

8215

BIS, Eastern Regional Laboratory (ERL)

None

IS 17043 : Part 2 (2024)

Shoes: Shoes for General Purpose

For all type

20400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-5.4, Table-1 (i) (Bond strength, N/mm, Min Upper to outsole, N/mm, Min)	-
Cl-5.4, Table-1 (ii) (Inter layer bond strength,= N/mm, Min Midsole to outsole, N/mm, Min)	-
Cl-5.4, Table-1 (vi) (Attachment strength of strap and buckle/D-ring N)	-
Cl-5.4, Table-1 (vii) (Attachment strength of strap and velcro , N, Min)	-
Cl-5.4, Table-1 (xi) (Seam strength, N/mm, Min)	-
Cl-5.4, Table-1 (xiii) (Abrasion resistance (volume loss), mm3)	-
Cl-5.4, Table-1 (xvi) (Hydrolysis resistance,(4) cut growth at 150 000 flexes, mm, Max)	-
Cl-6.1.1, Table-2 (v) (Water vapour permeability,mg/cm2 /h, Min Water vapour coefficient,mg/cm2 , Min)	-
Cl-6.1.1, Table-2 (vii) (Abrasion resistance)	-
Cl-6.1.3, Table- 4 (v) (Water vapour permeability (WVP), mg/cm2 /h, Min)	-
Cl-6.1.3, Table- 4 (vii) (Abrasion resistance)	-
Cl-5.4, Table-1 (xiv) (Chemical requirements(3))	-
Cl-5.4, Table-1 (xv) (Lead content (as Pb) ppm, Max)	-
Cl.1.4.1 of IS 17011 (Table B Sl I ) (Phthalate: DINP)	-
Cl.1.4.1 of IS 17011 (Table B Sl II ) (Phthalate:: DNOP)	-
Cl.1.4.1 of IS 17011 (Table B Sl III ) (Phthalate: DEHP)	-
Cl.1.4.1 of IS 17011 (Table B Sl IV ) (Phthalate: DIDP)	-
Cl.1.4.1 of IS 17011 (Table B Sl V) (Phthalate: BBP)	-
Cl.1.4.1 of IS 17011 (Table B Sl VI ) (Phthalate:DBP)	-
Cl.1.4.1 of IS 17011 (Table B Sl VII ) (Phthalate: DIBP)	-
Cl.4.1 (Annex-A Sl I ) (Organotin: Dibutyltin)	-
Cl.4.1 (Annex-A Sl II ) (Organotin: Dibutyltin Dichloride)	-
Cl.4.1 (Annex-A Sl III ) (Organotin: Dioctyltin)	-
Shoes: Shoes for General Purpose (Organotin: Monobutyltin)	-
Cl.4.1 (Annex-A Sl V ) (Organotin: Tributyltin)	-
Cl.4.1 (Annex-A Sl VI) (Organotin: Triphenyltin)	-
Cl.4.1 (Annex-A Sl VII ) (Organotin: Monoctyltin)	-
Cl.4.1 (Annex-A Sl VIII) (Organotin: Bis (tributyltin) oxide)	-
Cl.1.4.1 of IS 17011 (DMFU)	-
Cl. No.8.6.1,Table 1 of IS 17011 (Chromium)	-
Cl. No.8.6.1,Table 1 of IS 17011 (Formaldehyde (free or released by partial hydrolysis))	-
Cl. No.8.6.1,Table 1 of IS 17011 (pH)	-
Cl. No.8.6.1,Table 1 of IS 17011 (Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-
Cl.4.1 (Table B-1 Sl I) (Aromatic Amines: 4-aminobiphenyl)	-
Cl.4.1 (Table B-1 Sl II) (Aromatic Amines: Benzidine)	-
Cl.4.1 (Table B-1 Sl III) (Aromatic Amines: 4-chloro-o-toluidine)	-
Cl.4.1 (Table B-1 Sl IV) (Aromatic Amines: 2-naphthylamine)	-
Cl.4.1 (Table B-1 Sl V) (Aromatic Amines :o- aminoazotoluene)	-
Cl.4.1 (Table B-1 Sl VI) (Aromatic Amines: 2-amino-4-nitrotoluenem)	-
Cl.4.1 (Table B-1 Sl VII) (Aromatic Amines: p-chloroaniline)	-
Cl.4.1 (Table B-1 Sl VIII) (Aromatic Amines: 2,4-diaminoanisole)	-
Cl.4.1 (Table B-1 Sl X) (Aromatic Amines : 3,3’-dichlorobenzidine)	-
Cl.4.1 (Table B-1 Sl XI) (Aromatic Amines : 3,3’-dimethoxybenzidine)	-
Cl.4.1 (Table B-1 Sl XII) (Aromatic Amines : 3,3’-dimethylbenzidine)	-
Cl.4.1 (Table B-1 Sl XIII) (Aromatic Amines: 3,3’-dimethyl-4,4’-diaminodiphenylmethane)	-
Cl.4.1 (Table B-1 Sl XIV) (Aromatic Amines : p-cresi)	-
Cl.4.1 (Table B-1 Sl XV) (Aromatic Amines : 4,4’-methylene-bis(2-chloroaniline):)	-
Cl.4.1 (Table B-1 Sl XVI) (Aromatic Amines :4,4’-oxydianiline)	-
Cl.4.1 (Table B-1 Sl XVII) (Aromatic Amines:4,4’-thiodianiline)	-
Cl.4.1 (Table B-1 Sl XVIII) (Aromatic Amines :o-toluidine:)	-
Cl.4.1 (Table B-1 Sl XIX) (Aromatic Amines: 2,4-toluylendiamine)	-
Cl.4.1 (Table B-1 Sl XX) (Aromatic Amines: 2,4,5-trimethylaniline)	-
Cl.4.1 (Table B-1 Sl XXI) (Aromatic Amines :2,4-dimethylaniline)	-
Cl.4.1 (Table B-1 Sl XXII) (Aromatic Amines: 2,6-dimethylaniline:)	-
Cl.4.1 (Table B-1 Sl XXIII) (Aromatic Amines :2-methoxyaniline)	-
Cl.4.1 (Table B-1 Sl XXIV) (Aromatic Amines :4-aminoazobenzene)	-
Cl.4.1 (Table B-3 Sl I) (Allergenic Disperse Dyes :Disperse blue 3)	-
Cl.4.1 (Table B-3 Sl II) (Allergenic Disperse Dyes :Disperse blue 7)	-
Cl.4.1 (Table B-3 Sl III) (Allergenic Disperse Dyes :Disperse blue 26)	-
Cl.4.1 (Table B-3 Sl IV) (Allergenic Disperse Dyes :Disperse blue 102)	-
Cl.4.1 (Table B-3 Sl V) (Allergenic Disperse Dyes: Disperse brown 1)	-
Cl.4.1 (Table B-3 Sl VI) (Allergenic Disperse Dyes :Disperse yellow 1)	-
Cl.4.1 (Table B-3 Sl VII) (Allergenic Disperse Dyes :Disperse yellow 9)	-
Cl.4.1 (Table B-3 Sl VIII) (Allergenic Disperse Dyes :Disperse yellow 39)	-
Cl.4.1 (Table B-3 Sl IX) (Allergenic Disperse Dyes :Disperse yellow 49)	-
Cl.4.1 (Table B-3 Sl X) (Allergenic Disperse Dyes :Disperse orange 1)	-
Cl.4.1 (Table B-3 Sl XI) (Allergenic Disperse Dyes :Disperse red 11)	-
Cl.4.1 (Table B-3 Sl XII) (Allergenic Disperse Dyes :Disperse red 17)	-
Cl.4.1 (Table B-3 Sl XIII) (Allergenic Disperse Dyes :Disperse yellow 7)	-
Cl.4.1 (Table B-3 Sl XIV) (Allergenic Disperse Dyes :Disperse yellow 56)	-
Cl.4.1 (Table B-3 Sl XV) (Allergenic Disperse Dyes :Disperse red 151)	-
Cl.4.1 (Table B-3 Sl XVI) (Allergenic Disperse Dyes :Solvent red 23)	-
Cl.4.1 (Table B-4 Sl I) (Carcinogenic Disperse Dyes :Navy blue)	-
Cl.4.1 (Table B-4 Sl II) (Carcinogenic Disperse Dyes: Disperse blue 1)	-
Cl.4.1 (Table B-4 Sl III) (Carcinogenic Disperse Dyes: Disperse blue 35)	-
Cl.4.1 (Table B-4 Sl IV) (Carcinogenic Disperse Dyes :Disperse blue 106)	-
Cl.4.1 (Table B-4 Sl V) (Carcinogenic Disperse Dyes: Disperse blue 124)	-
Cl.4.1 (Table B-4 Sl VI) (Carcinogenic Disperse Dyes :Disperse yellow 3)	-
Cl.4.1 (Table B-4 Sl VII) (Carcinogenic Disperse Dyes: Disperse orange 3)	-
Cl.4.1 (Table B-4 Sl VIII) (Carcinogenic Disperse Dyes :Disperse orange 37/59/76a))	-
Cl.4.1 (Table B-4 Sl IX) (Carcinogenic Disperse Dyes :Disperse red 1)	-
Cl.4.1 (Table B-4 Sl X) (Carcinogenic Disperse Dyes :Basic red 9)	-
Cl.4.1 (Table B-4 Sl XI) (Carcinogenic Disperse Dyes :Violet 3)	-
Cl.4.1 (Table B-4 Sl XII) (Carcinogenic Disperse Dyes Disperse yellow 23)	-
Cl.4.1 (Table B-3) (Allergenic and Carcinogenic Disperse Dyes)	-
Cl.4.1 (Table B-11) (PCP-TeCP-TriCP polychlorophenols)	-

-
Mech- Except Colour fastness to Artificial Daylight (table 3) and slip resistance for kids, Mech Quantity:- 5 Pairs + Raw material for Additional requirements + Type to be declared + Prepared test piece to be provided for seam strength test and Strength of eyelet attachment + Slab for Hydrolysis resistance test(200 X 200 mm of thickness 3.0 +/- 0.2 mm) + For multilayer outsole separate slab of outer layer of outsole to be provided for Abrasion Resistance test, Chem - Complete, Material declaration required for Innocuousness test.

8216

Kailtech Test and Research Centre Pvt. Ltd., Indore

8125636

IS 7226 (1974)

Specification for cold - Rolled medium, high carbon and low alloy steel strip for general engineering purposes

Except Grade 110Cr35W2

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1 Table 1(Carbon- IS 228)	-	2000	-
4.1 Table 1(Manganese- IS 228)	-	2000	-
4.1 Table 1(Silicon- IS 228)	-	2000	-
4.1 Table 1(Sulphur- IS 228)	-	2000	-
4.1 Table 1(Phosphorous- IS 228)	-	2000	-
4.1 Table 1(Chromium- IS 228)	-	2000	-
4.1 Table 1(Tungsten- IS 228)	-	0	-
5(HARDNESS TEST)	-	2000	-
6( FREEDOM FROM DEFECTS)	-	1000	-
9.1, Table 3(i)TOLERANCE ON WIDTH)	-	1000	-
9.1, Table 4(ii)TOLERANCE ON THICKNESS)	-	1000	-
9.2( Camber)	-	1000	-
10(SURFACE FINISH)	-	0	-
12.1(Marking)	-	0	-
12.1(Marking)	-	0	-
4.1 Table 1(Carbon- IS 228)	-	0	-
4.1 Table 1(Manganese- IS 228)	-	0	-
4.1 Table 1(Silicon- IS 228)	-	0	-
4.1 Table 1(Sulphur- IS 228)	-	0	-
4.1 Table 1(Phosphorous- IS 228)	-	0	-
4.1 Table 1(Chromium- IS 228)	-	0	-
4.1 Table 1(Tungsten- IS 228)	-	0	-
5(HARDNESS TEST)	-	0	-
6( FREEDOM FROM DEFECTS)	-	0	-
9.1, Table 3(i)TOLERANCE ON WIDTH)	-	0	-
9.1, Table 4(ii)TOLERANCE ON THICKNESS)	-	0	-
9.2( Camber)	-	0	-
10(SURFACE FINISH)	-	0	-
12.1(Marking)	-	0	-
12.1(Marking)	-	0	-

18 Dec, 2027

-
Included w.e.f 10.10.2024 Exclusion : All grades except Grade 110Cr35W2

8217

Kailtech Test and Research Centre Pvt. Ltd., Indore

8125636

IS 6902 (1973)

Specification for steel wire for spokes

All

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4.1(Carbon- IS 228)	-	3000	-
Cl. 4.1(Carbon- IS 228)	-	0	-
Clause No. 4.1(Carbon)	-	0	-
Cl. 4.1(Manganese- IS 228.)	-	2000	-
Cl. 4.1(Manganese- IS 228.)	-	0	-
Clause No. 4.1(Manganese)	-	0	-
Cl. 4.1(Sulphur- IS 228.)	-	2000	-
Cl. 4.1(Sulphur- IS 228.)	-	0	-
Clause No. 4.1(Sulphur)	-	0	-
Cl. 4.1(Phosphorus- IS 228.)	-	2000	-
Cl. 4.1(Phosphorus- IS 228.)	-	0	-
Clause No. 4.1(Phosphorus)	-	0	-
5.1( Tensile strength )	-	6000	Including Coating Tests
5.1( Tensile strength )	-	0	-
6( Bend Test )	-	1000	-
6.0( Bend Test )	-	0	-
7(Freedom from defects )	-	1000	-
7.0(Freedom from defects )	-	0	-
8(Wire diameter & Tolerances)	-	1000	-
8.0(Wire diameter & Tolerances)	-	0	-

18 Dec, 2027

-
Included w.e.f 10.10.2024

8218

Kailtech Test and Research Centre Pvt. Ltd., Indore

8125636

IS 4224 (1972)

Specification for steel wire for staples, pins and clips (First Revision)

All

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 3.1, Table 1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	2500	-
Cl. 3.1, Table 1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	2000	-
Cl. 3.1, Table 1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	2000	-
Cl. 3.1, Table 1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	2000	-
4(Freedom from defects , IS 4224)	-	1000	-
5(Sizes and Tolerances - IS 4224)	-	1000	-
6(Finish)	-	3500	Mass of Zinc Coating, Uniformity pf Zinc Coating
7.1(Tensile Test - IS 1608(Pt -1))	-	5000	-
7.2(Reverse Bend Test--IS 1716)	-	2000	-

18 Dec, 2027

-
Included w.e.f 10.10.2024

8219

Kailtech Test and Research Centre Pvt. Ltd., Indore

8125636

IS 4223 (1975)

Steel Wire For Umbrella Ribs

All

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6.1(Sulphur- Appropriate parts of IS 228.)	-	2000	-
Cl 6.1(Phosphorus- Appropriate parts of IS 228.)	-	2000	-
7(Freedom rom defects , IS 4223)	-	1000	-
8,9 (Sizes and Tolerances - IS 4223)	-	1000	-
10.1, Table 1(Mechanical ptoperties - IS 1608(Pt -1))	-	4000	-
10.2(Torsion Test - IS 1717)	-	2000	-
10.3(Reverse Bend Test--IS 1716)	-	2000	-
10.4( Straightness Test - IS 4223)	-	1000	-
10.5(Deflection Test - IS 4223)	-	1000	-
12(Rust Protection-IS 4223)	-	0	-
Cl. 6.1(Sulphur- IS 228(Part 9))	-	0	-
Cl. 6.1(Phosphorous- IS 228(Part 3))	-	0	-

18 Dec, 2027

-
Included w.e.f 10.10.2024

8220

Kailtech Test and Research Centre Pvt. Ltd., Indore

8125636

IS 2255 (1977)

Specification for mild steel wire rod for the manufacture of machine screws (By Cold Heading Process) (Second Revision)

all

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 5.1(Carbon- Relevant parts of IS 228.)	-	2500	-
Cl. 5.1(Manganese- Relevant parts of IS 228.)	-	2000	-
Cl. 5.1(Sulphur- Relevant parts of IS 228.)	-	2000	-
Cl. 5.1(Phosphorus- Relevant parts of IS 228.)	-	2000	-
7(Sizes and tolernces)	-	2000	-
8(FREEDOM FROM DEFECTS)	-	2000	-

18 Dec, 2027

-
Included w.e.f 10.10.2024

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number