BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15617 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

8311

LUCID LABORATORIES PRIVATE LIMITED, HYDERABAD

6121636

IS 738 (1994)

Wrought aluminium alloys, drawn tube for general engineering purposes - Specification (Third Revision)

9100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6(Freedom from Defects- Cl.6)	-	100	-
Cl.7, IS 2678(Wall Thickness at any point)	-	100	-
Cl.7, IS 2678(Mean Wall Thickness)	-	100	-
Cl.7, IS 2678(Straightness)	-	100	-
Cl. 9.1 Table 2(0.2 percent proof stress- IS 2657)	-	1300	-
Cl. 9.1 Table 2(Tensile Strength- IS 2657)	-	1300	-
Cl. 9.1 Table 2(Elongation on guage length of 50 mm)	-	1300	-
Cl. 9.1.2(Flattening Test- IS 2328)	-	200	-
Cl. 8.1, Table 1(Aluminium- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	400	-
Cl. 8.1, Table 1(Copper- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	400	-
Cl. 8.1, Table 1(Magnesium- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	400	-
Cl. 8.1, Table 1(Silicon- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	400	-
Cl. 8.1, Table 1(Iron- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	400	-
Cl. 8.1, Table 1(Manganese- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	400	-
Cl. 8.1, Table 1(Zinc- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	400	-
Cl. 8.1, Table 1(Titanium- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	400	-
Cl. 8.1, Table 1(Chromium- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	400	-
Cl. 8.1, Table 1(Ti+ V (Remarks)- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	400	-
Cl. 8.1, Table 2(T. I.(Remarks)- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	300	-
Cl. 8.1, Table 3(Ti+ Cr (Remarks)- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	100	-
Cl. 8.1, Table 4(Cr+ Mn (Remarks)- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	100	-
10(Marking)	-	100	-

19 Apr, 2028

-
-

8312

PIONEER TESTING LABORATORY PRIVATE LIMITED

8176806

IS 617 (2024)

Aluminium and Aluminium Alloys Ingots for Remelting and Castings for General Engineering Purposes â Specification (Fourth Revision)

All Type

5700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6.1, Table-1(Si)	-	300	-
Cl-6.1, Table-1(Fe)	-	300	-
Cl-6.1, Table-1(Cu)	-	300	-
Cl-6.1, Table-1(Mn)	-	300	-
Cl-6.1, Table-1(Mg)	-	300	-
Cl-6.1, Table-1(Cr)	-	300	-
Cl-6.1, Table-1(Ni)	-	300	-
Cl-6.1, Table-1(Zn)	-	300	-
Cl-6.1, Table-1(Pb)	-	300	-
Cl-6.1, Table-1(Sn)	-	300	-
Cl-6.1, Table-1(Ti)	-	300	-
Cl-6.1, Table-1(Others elements Each)	-	300	-
Cl-6.1, Table-1(Others elements Total)	-	300	-
Cl-6.1, Table-1(Aluminium)	-	300	-
Cl-6.2(The chemical analysis)	-	300	-
Cl-7.1, Table-2(Sand-Cast Alloys- Tensile Strength)	-	2000	-
Cl-7.1, Table-2(Sand-Cast Alloys- Proof Stress)	-	2000	-
Cl-7.1, Table-2(Sand-Cast Alloys- Elongation)	-	2000	-
Cl-7.1, Table-2(Sand-Cast Alloys- Brinell Hardness HBW)	-	2000	-
Cl-7.1, Table-3(Chill Cast Alloys- Tensile Strength)	-	2000	-
Cl-7.1, Table-3(Chill Cast Alloys- Proof Stress)	-	2000	-
Cl-7.1, Table-3(Chill Cast Alloys- Elongation)	-	2000	-
Cl-7.1, Table-3(Chill Cast Alloys- Brinell Hardness HBW)	-	2000	-
Cl-7.1, Table-4(Investment-Cast Alloys- Tensile Strength)	-	2000	-
Cl-7.1, Table-4(Investment-Cast Alloys- Proof Stress)	-	2000	-
Cl-7.1, Table-4(Investment-Cast Alloys- Elongation)	-	2000	-
Cl-7.1, Table-4(Investment-Cast Alloys-Brinell Hardness)	-	2000	-
Cl-7.2(Tensile Tests)	-	2000	-
Cl-7.3(Test Pieces)	-	2000	-
Cl-7.4(Hardness)	-	2000	-
Cl-8(Freedom from Defects)	-	500	-
Cl-11(RETEST)	-	2000	-
Cl-13(Marking)	-	300	-
Cl. 6(Silicon)	-	300	-
Cl. 6(Iron)	-	300	-
Cl. 6(Copper)	-	300	-
Cl. 6(Manganese)	-	300	-
Cl. 6(Magnesium)	-	300	-
Cl. 6(Chromium)	-	300	-
Cl. 6(Nickel)	-	300	-
Cl. 6(Zinc)	-	300	-
Cl. 6(Lead)	-	300	-
Cl. 6(Tin)	-	300	-
Cl. 6(Titanium)	-	300	-
Cl. 6(Others Element Each)	-	300	-
Cl. 6(Others Element Total)	-	300	-
Cl. 6(Aluminium)	-	300	-
Cl. 6(Silver)	-	300	-
Cl. 6(Zirconium)	-	300	-
Cl. 6(Titanium+Zirconium)	-	300	-
Cl. 6(Antimony)	-	300	-
Cl. 6(Cobalt)	-	300	-
Cl. 6(Antimony+Cobalt)	-	300	-
Cl. 6(Beryllium)	-	300	-
10(Pressure Test)	-	2000	-
Cl-6.1, Table-1(Si)	-	300	-
Cl-6.1, Table-1(Fe)	-	300	-
Cl-6.1, Table-1(Cu)	-	300	-
Cl-6.1, Table-1(Mn)	-	300	-
Cl-6.1, Table-1(Mg)	-	300	-
Cl-6.1, Table-1(Cr)	-	300	-
Cl-6.1, Table-1(Ni)	-	300	-
Cl-6.1, Table-1(Zn)	-	300	-
Cl-6.1, Table-1(Pb)	-	300	-
Cl-6.1, Table-1(Sn)	-	300	-
Cl-6.1, Table-1(Ti)	-	300	-
Cl-6.1, Table-1(Others elements Each)	-	300	-
Cl-6.1, Table-1(Others elements Total)	-	300	-
Cl-6.1, Table-1(Aluminium)	-	300	-
Cl-6.2(The chemical analysis)	-	0	-
Cl-7.1, Table-2(Sand-Cast Alloys- Tensile Strength)	-	1500	-
Cl-7.1, Table-2(Sand-Cast Alloys- Proof Stress)	-	1000	-
Cl-7.1, Table-2(Sand-Cast Alloys- Elongation)	-	1000	-
Cl-7.1, Table-2(Sand-Cast Alloys- Brinell Hardness HBW)	-	1500	-
Cl-7.1, Table-3(Chill Cast Alloys- Tensile Strength)	-	1500	-
Cl-7.1, Table-3(Chill Cast Alloys- Proof Stress)	-	1000	-
Cl-7.1, Table-3(Chill Cast Alloys- Elongation)	-	1000	-
Cl-7.1, Table-3(Chill Cast Alloys- Brinell Hardness HBW)	-	1500	-
Cl-7.1, Table-4(Investment-Cast Alloys- Tensile Strength)	-	1500	-
Cl-7.1, Table-4(Investment-Cast Alloys- Proof Stress)	-	1000	-
Cl-7.1, Table-4(Investment-Cast Alloys- Elongation)	-	1000	-
Cl-7.1, Table-4(Investment-Cast Alloys-Brinell Hardness)	-	1500	-
Cl-7.2(Tensile Tests)	-	1500	-
Cl-7.3(Test Pieces)	-	0	-
Cl-7.4(Hardness)	-	1500	-
Cl-8(Freedom from Defects)	-	500	-
Cl-11(RETEST)	-	0	-
Cl-13(Marking)	-	0	-
Cl. 6(Silicon)	-	300	-
Cl. 6(Iron)	-	300	-
Cl. 6(Copper)	-	300	-
Cl. 6(Manganese)	-	300	-
Cl. 6(Magnesium)	-	300	-
Cl. 6(Chromium)	-	300	-
Cl. 6(Nickel)	-	300	-
Cl. 6(Zinc)	-	300	-
Cl. 6(Lead)	-	300	-
Cl. 6(Tin)	-	300	-
Cl. 6(Titanium)	-	300	-
Cl. 6(Others Element Each)	-	300	-
Cl. 6(Others Element Total)	-	300	-
Cl. 6(Aluminium)	-	300	-
Cl. 6(Silver)	-	500	-
Cl. 6(Zirconium)	-	500	-
Cl. 6(Titanium+Zirconium)	-	500	-
Cl. 6(Antimony)	-	500	-
Cl. 6(Cobalt)	-	500	-
Cl. 6(Antimony+Cobalt)	-	500	-
Cl. 6(Beryllium)	-	500	-
10(Pressure Test)	-	1500	-

10 Mar, 2027

-
Included w.e.f 20.05.2025

8313

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY - CIPET, HALDIA

5116334

IS 10840 (1994)

Blow moulded hdpe containers for packing of vanaspati - Specification (Second Revision)

All

9699.99 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Materials)	-	5025	(Test charges 4400 + specimen charges 625) Discount of 25 % is applicable on total test charges only for BIS. 1. Identification 2. Density 3. Overall migration
4.2(Manufacture)	-	500	Discount of 25 % is applicable on total test charges only for BIS.
4.3(Capacity)	-	499.99	Discount of 25 % is applicable on total test charges only for BIS.
4.4(Mass)	-	499.99	Discount of 25 % is applicable on total test charges only for BIS.
4.5(Shape and Dimensions)	-	500	Discount of 25 % is applicable on total test charges only for BIS.
4.6(Wall Thickness)	-	500	Discount of 25 % is applicable on total test charges only for BIS.
4.7.1(Closure Leakage test)	-	500	Discount of 25 % is applicable on total test charges only for BIS.
4.7.2(Drop impact test)	-	1100	Discount of 25 % is applicable on total test charges only for BIS.
4.7.3(Stacking test)	-	900	Discount of 25 % is applicable on total test charges only for BIS.
4.7.4(Handle Pull Test)	-	500	Discount of 25 % is applicable on total test charges only for BIS.
4.7.5(Ink adhesion for printed containers)	-	500	Discount of 25 % is applicable on total test charges only for BIS.
4.7.6(Product Resistance of printed containers)	-	500	Discount of 25 % is applicable on total test charges only for BIS.
4.7.7(Migration test)	-	1200	Discount of 25 % is applicable on total test charges only for BIS.
4.1(Material)	-	0	-
4.2(Manufacture)	-	0	-
4.3(Capacity)	-	0	-
4.4(Mass)	-	0	-
4.5(Shape and Dimensions)	-	0	-
4.6(Wall Thickness)	-	0	-
4.7.1(Closure Leakage test)	-	0	-
4.7.2(Drop Impact Test)	-	0	-
4.7.3(Stacking Test)	-	0	-
4.7.4(Handle Pull Test)	-	0	-
4.7.5(Ink Adhesion for Printed Contalners)	-	0	-
4.7.6(Product Resistance of Printed Containers)	-	0	-
4.7.7(Migration test)	-	0	-
5(Marking)	-	0	-

14 Dec, 2027

-
Included w.e.f.10.12.2024

8314

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY - CIPET, HALDIA

5116334

IS 15532 (2004)

Plastics crates for fruits and vegetables - Specification

All

9900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3, 3.1(Requirements)	-	0	-
3.2(Material)	-	4300	Discount of 25 % is applicable on total test charges only for BIS. 1. Identification= 2000 2.colour = 500 3. MFI=1100 4.Density=700
3.3(Shape, Dimensions and Design)	-	499.99	Discount of 25 % is applicable on total test charges only for BIS.
3.4(Mass)	-	499.99	Discount of 25 % is applicable on total test charges only for BIS.
3.5(Appearance and Surface Finish)	-	499.99	Discount of 25 % is applicable on total test charges only for BIS.
3.6(Dimensional Stability)	-	699.99	Discount of 25 % is applicable on total test charges only for BIS.
3.7(Confluence Line Strength)	-	1099.98	Discount of 25 % is applicable on total test charges only for BIS.
3.8.1(Compressive Strength (Resistance to Applied Load))	-	1099.99	Discount of 25 % is applicable on total test charges only for BIS.
3.8.2(Resistance to Drop)	-	1099.99	Discount of 25 % is applicable on total test charges only for BIS.
3.9(Resistance to Environmental Stress Cracking)	-	1200	Discount of 25 % is applicable on total test charges only for BIS.
3.10.1(Suspension Test)	-	2200	Discount of 25 % is applicable on total test charges only for BIS.
3.10.2(Free-Fall Test)	-	0	-
3.1(Crates)	-	0	-
3.2(Material)	-	0	-
3.3(Shape, Dimensions and Design)	-	0	-
3.4(Mass)	-	0	-
3.5(Appearance and Surface Finish)	-	0	-
3.6(Dimensional Stability)	-	0	-
3.7(Confluence line Strength)	-	0	-
3.8(Mechanical Strength)	-	0	-
3.9(Resistance to Environmental Stress Cracking)	-	0	-
3.10(Handle Test)	-	0	-
4(Packing and Marking)	-	0.02	-

14 Dec, 2027

-
Included .w.e.f.10.12.2024

8315

LUCID LABORATORIES PRIVATE LIMITED, HYDERABAD

6121636

IS 734 (1975)

Specification for wrought aluminium and aluminium alloy forging stock and forgings (For General Engineering Purposes) (Second Revision)

9100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1 table 1(chemical composition)	-	0	Given for individual element
5.1 table 2(0.2% proof strength)	-	1450	-
5.1 table 2(Tensile strength)	-	1450	-
5.1 table 2(Elongation)	-	1450	-
Cl.5.1(Aluminium - IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.5.1(Copper - IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.5.1(Magnesium - IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.5.1(Silicon - IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.5.1(Iron - IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.5.1(Manganese - IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.5.1(Zinc - IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.5.1(Titanium And/or Other Grain Refining Elements - IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.5.1(Chromium - IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.5.1(Remarks (Cu + Mg + Si + Fe + Mn + Zn) - IS 504 and its parts or any other intrumental/chemical methods)	-	150	-
4.1(Freedom from defects)	-	100	-
9.1(Tensile test)	-	0	Given for individual test
5.1 table 1(chemical composition)	-	-	-
5.1 table 2(0.2% proof strength)	-	-	-
5.1 table 2(Tensile strength)	-	-	-
5.1 table 2(Elongation)	-	-	-
Cl.5.1(Aluminium - IS 504 and its parts or any other intrumental/chemical methods)	-	-	-
Cl.5.1(Copper - IS 504 and its parts or any other intrumental/chemical methods)	-	-	-
Cl.5.1(Magnesium - IS 504 and its parts or any other intrumental/chemical methods)	-	-	-
Cl.5.1(Silicon - IS 504 and its parts or any other intrumental/chemical methods)	-	-	-
Cl.5.1(Iron - IS 504 and its parts or any other intrumental/chemical methods)	-	-	-
Cl.5.1(Manganese - IS 504 and its parts or any other intrumental/chemical methods)	-	-	-
Cl.5.1(Zinc - IS 504 and its parts or any other intrumental/chemical methods)	-	-	-
Cl.5.1(Titanium And/or Other Grain Refining Elements - IS 504 and its parts or any other intrumental/chemical methods)	-	-	-
Cl.5.1(Chromium - IS 504 and its parts or any other intrumental/chemical methods)	-	-	-
Cl.5.1(Remarks (Cu + Mg + Si + Fe + Mn + Zn) - IS 504 and its parts or any other intrumental/chemical methods)	-	-	-
4.1(Freedom from defects)	-	-	-
9.1(Tensile test)	-	-	-

19 Apr, 2028

-
-

8316

Arihant Analytical Laboratory Pvt. Ltd., Sonipat

9167906

IS 2185 : Part 3 (1984)

Concrete Masonry Units Part 3 Autoclaved Cellular Aerated Concrete Blocks

All Grade/Type/Size Designation

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Physical requirments)	-	25000	-
8.2(Physical requirments-Dimensions-Length)	-	25000	-
8.2(Physical requirments-Dimensions-Height)	-	25000	-
8.2(Physical requirments-Dimensions-Width)	-	25000	-
8.3(Physical requirments- Block density)	-	25000	-
8.4(Physical requirments- Compressive strength)	-	25000	-
8.5(Thermal Conductivity)	-	25000	-
8.6( Drying Shrinkage )	-	25000	-
8.4, 9.2 & 11.3(Indivisual Moisture Content)	-	25000	-
8.4, 9.2 & 11.3(Indivisual Bulk density)	-	25000	-
8.4, 9.2 & 11.3 & Table 1(Indivisual Compressive strength)	-	25000	-
8.3 & 9.1(Indivisual Moisture Content)	-	25000	-
8.3 & 9.1 Table 1(Indivisual Block Density)	-	25000	-
3.2 & 8.2(Indivisual Height)	-	25000	-
3.2 & 8.2(Indivisual Width)	-	25000	-
3.2 & 8.2(Indivisual Length)	-	25000	-
8.6, 9.4 & 11.5(Grade)	-	25000	-
3.4(Special Faces)	-	25000	-
3.3(Faces & Arises)	-	25000	-
3.1(Shape)	-	25000	-
8.1.1(General (Exposed wall construction))	-	25000	-
5(MATERIALS)	-	25000	-
7(SURFACE TEXTURE AND FINISH)	-	25000	-
9.3(Thermal Conductivity)	-	25000	-
15(Marking)	-	25000	-

02 Jun, 2027

-
Included w.e.f 30.05.2025

8317

BIS, Hyderabad Branch Laboratory (HYBL)

None

IS 14252 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sack for filling sand – Specification (second revision)

13500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Raw Material)	-
3.2 (Tapes – Width )	-
3.2 (Tapes – Linear Density )	-
3.3 (Tying Cord)	-
3.3 (Tying Cord)	-
3.3 (Tying Cord)	-
3.4 (Sack)	-
3.4.1 (Seam)	-
3.4.1 (Seam)	-
3.4.1 (Seam)	-
3.4.1 (Seam)	-
4.1 and Table 1 i a (Dimensions Outside Length)	-
4.1 and Table 1 i b (Dimensions Outside Width)	-
4.1 and Table 1 ii (Ends per dm )	-
4.1 and Table 1 iii (Picks per dm )	-
4.2 and Table 1 iv (Mass of sack )	-
4.1 and Table 1 v a (Average breaking strength of fabric Warpway )	-
4.1 and Table 1 v b (Average breaking strength of fabric Weftway )	-
4.1 and Table 1 vi (Average Breaking strength of bottom seam )	-
4.1 and Table 1 vii a (Elongation at break of fabric Lengthwise)	-
4.1 and Table 1 vii b (Elongation at break of fabric Widthwise )	-
4.1 and Table 1 viii (Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-
4.1 and Table 1 ix (Ash content )	-

-
Limited test facility for long term test (UV ageing), Monthly capacity for long term test is only 4 samples.

8318

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET) : IPT-BHUBANESWAR

5102634

IS 10124 : Part 1 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 1 General Requirements (Second Revision)

General Requirement

5550 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Material)	-	0	nil
4(Size of fitting)	-	0	nil
5.1 Table-1 Fig.1(Dimension of Socket length)	-	500	nil
5.1.2 Table-1(Dimensions of mean inside diameter at mid-point of socket depth)	-	0	nil
5.1.3 (Out of Roundness Tolerance of Socket Inside Diameter)	-	0	nil
5.2 Table-2 Fig.2(Dimensions of socket for elastomeric sealing ring)	-	0	nil
6.1(Opacity test in accordance with IS 12235 (Part 3))	-	700	nil
6.2(Short Term Hydraulic Test in accordance with Annex A)	-	1350.00	SPECIMEN PREPARATION-500/-
3.2.3(socket, measurements)	-	0	0
6.3(Effect on water test)	-	3000.00	nil

31 Dec, 2026

-
-

8319

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET) : IPT-BHUBANESWAR

5102634

IS 12818 (2010)

Unplasticized polyvinyl chloride (Pvc - U) screen and casing pipes for bore/tubewells - Specification (Second Revision)

UPVC screen and casing pipes for Bore/tube well

16350.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.6(Vicat Softening Temperature IS 12235 (Part 2).)	-	1100.00	nil
9.5(Tensile Strength IS 12235(Part 13))	-	1600.00	Specimen preparation charge 500.00
9.4 and Table 14(Resistance to External Blows at 0 ?C IS 12235 (Part 9))	-	1500.00	Specimen preparation charge 500.00
9.3(Density IS 12235 (Part 14))	-	700.00	nil
9.2(Internal Diameter)	-	500.00	nil
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	500.00	nil
8.4(Sealing rings - Hardness)	-	500.00	nil
8.1 to 8.3 and Table 11 &12 Fig 3A & 4A(THREADING OF SCREEN ANDCASING PIPES. IS 554.)	-	500.00	nil
7.5 and Table 10 Fig 2A & 2B(Minimum number of slots on the circumference of the cross-section.)	-	0	nil
7.5 and Table 10 Fig 2A & 2B(Summation of slot lengths over internal circumference of the cross- section.)	-	0	nil
7.4 Table 8 & 9 Fig 1(Segmental length for Spigot (average of 4.0))	-	0	nil
7.4 Table 8 & 9 Fig 1(Segmental length,mm for socket (average of 4.0))	-	0	nil
7.4 Table 8 & 9 Fig 1(Segmental length, l3)	-	0	nil
7.4 Table 8 & 9 Fig 1(Effective length, l2)	-	0	nil
7.3.2(Rib height)	-	0	nil
7.3.1(No.of Ribs)	-	0	nil
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Max)	-	0	nil
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Min)	-	0	nil
7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Mean outside dia over connection,mm (Take 4 reading and maximum valu reported))	-	0	nil
7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point, Max)	-	0	nil
7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point , Min)	-	0	NIL
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe , Max)	-	0	nil
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe, Min)	-	0	nil
7.2 and Table 5, 6 & 7 Fig 1B(Nominal Diameter)	-	0	nil
7.2 and Table 5, 6 & 7 Fig 1B(DIMENSIONS - Casing Pipes)	-	1500.00	specimen preparation charge:500.00
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Wall thickness)	-	0	nil
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Outer Diameter at any point )	-	0	nil
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Mean Outer Diameter of Pipe)	-	0	nil
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Nominal Diameter)	-	0	nil
4.1.2(K-Value as per IS-4669)	-	1000.00	nil
9.7(Effect on Water a) Lead (first extraction) b) Lead (Third extraction) c) Dialkyl Tin C4 & higher homologues measured as Tin (Third extraction) d) Cadmium (All three extracts) e) Mercury (All three extracts) f) Other Toxic Substances )	-	3000.00	nil
4.1.1 (Ref. 3.4.1. of IS 10151)(Composition - The monomer content (VCM content) in the resin - Annex A ofIS 10151)	-	3000.00	nil
9.1( Visual Appearance)	-	500.00	nil
5(COLOUR)	-	500.00	nil

31 Dec, 2026

-
-

8320

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET) : IPT-BHUBANESWAR

5102634

IS 14735 (1999)

Unplasticized Polyvinyl Chloride (UPVC) Injection Moulded Fittings for Soil and Waste Discharge System for Inside and Outside Buildings Including Ventilation and Rain Water System -

UPVC fittings

14650.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10(Workmanship)	-	500.00	nil
3(Type of Fitting)	-	0	nil
4(Size Designation)	-	0	nil
5(Colour of fittings)	-	500.00	nil
7.1,Table 1(Wall thickness)	-	500	nil
7.2 ,Table 2&3(Socket Dimensions)	-	0	nil
7.3(Dimensions of waste trap(Nahani Trap)	-	0	nil
8(Sealing Rings)	-	500.00	HARDNESS
11(Design requirements)	-	500.00	nil
11.1(Solvent cement type or Rubber ring type)	-	0	nil
11.2(Socket and spigot configeration)	-	0	nil
11.4,Table 5(Vent cowl)	-	0	nil
11.5,Table 6(Pipe Clips)	-	0	nil
12.1(Visual appearance)	-	500.00	nil
12.2(Stress relief test)	-	700.00	nil
12.3(Vicat softening tempewrature)	-	1100.00	nil
Cl.13, IS 12235 (P-7)-2004, (Resistance to Sulphuric Acid)	-	2500.00	specimen preparation charge: 500.00
Cl.14, Annex A(Titanium Di-Oxide Content)	-	1200	nil
Cl.15, Annex B(Sulphated Ash Content)	-	1200.00	nil
16.1(Impact test)	-	1100.00	DROP TEST
17(Watet tightness of joint)	-	850.00	nil
12.4(Effect on water test)	-	3000.00	nil
7.4(Chamfer)	-	0.00	nil
11.3(Access Openings)	-	0.00	nil
Table 4(Dimension of Access Openings)	-	0.00	nil

31 Dec, 2026

-
-

8321

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET) : IPT-BHUBANESWAR

5102634

IS 14968 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing 50 Kg/25 kg sugar – Specification (first revision)

HDPE/PP bags for sugar packing

30280.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(TYPES)	-	0	nil
4.1(Raw Material)	-	2000.00	nil
4.2(Tapes – Width IS 6192 and IS 11197)	-	500.00	nil
4.2(Tapes – Linear Density )	-	700.00	nil
4.2(Construction)	-	0	nil
4.3(Sacks)	-	500.00	nil
4.3.1(Bottom Seam)	-	500.00	nil
4.3.1(The two rows of stitches shall be separated from each other)	-	0	nil
4.3.1( The outer stitch)	-	0	nil
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	0	nil
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	0	nil
4.3.1(stitches/dm)	-	0.00	nil
4.3.2(Mouth)	-	0	nil
4.4(Liner IS 10146 or IS 10910.)	-	1700.00	nil
4.4(Mass of the loose liner )	-	500.00	nil
4.4(Width of the loose liner)	-	500.00	nil
4.4(Length of the line)	-	0	nil
4.4(Bottom seam of the loose liner)	-	0	nil
4.4.1(Liner)	-	2000.00	nil
4.5 and Table 1 i(Capacity)	-	500.00	nil
5.2 and Table 1 ii a(Dimensions Inside Length)	-	500.00	nil
5.2 and Table 1 ii b(Dimensions Inside Width)	-	0	nil
5.2 and Table 1 iii(Ends per dm )	-	500.00	nil
5.2 and Table 1 iv(Picks per dm )	-	500.00	nil
5.1 and Table 1 v a(Mass of unlaminated sack IS 1964)	-	500.00	nil
5.1 and Table 1 v b(Mass of unlaminated sack with liner )	-	500.00	nil
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise IS 1969 (Part 1))	-	1100.00	nil
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise IS 1969 (Part 1))	-	1100.00	nil
5.2 and Table 1 vi(Breaking strength of bottom seam IS 9030 )	-	1100.00	nil
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise IS 1969 (Part 1))	-	0	nil
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise IS 1969 (Part 1))	-	0	nil
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	2200.00	nil
5.2 and Table 1 x(Ash content )	-	1200.00	nil
3(TYPES)	-	0.00	nil
4.2(Tapes – Width IS 6192 and IS 11197)	-	500.00	nil
4.2(Construction)	-	0.00	nil
4.2 (Mesh size and weight in g/cm2) (amendment 3)(Mesh size and weight in g/cm2)	-	500.00	nil
5.3(UV Resistance)	-	10180.00	Conditioning chatge(UV exposure)
Cl-4.4 (Amendment-3)(Thickness of liner)	-	500.00	nil

31 Dec, 2026

-
-

8322

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET) : IPT-BHUBANESWAR

5102634

IS 10840 (1994)

Blow moulded hdpe containers for packing of vanaspati - Specification (Second Revision)

17650.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Materials)	-	9950.0	container Body :(Density, Melt flow Index, Overall Migration) Handle closure: (Density, Melt flow Index, Overall Migration) Inner seal :(Density, Melt flow Index, Overall Migration)
4.2(Manufacture)	-	0	nil
4.3(Capacity)	-	500.00	nil
4.4(Mass)	-	500.00	nil
4.5(Shape and Dimensions)	-	500.00	nil
4.6(Wall Thickness)	-	500.00	nil
4.7.1(Closure Leakage test)	-	500.00	nil
4.7.2(Drop impact test)	-	1100.00	nil
4.7.3(Stacking test)	-	900.00	nil
4.7.4(Handle Pull Test)	-	500.00	nil
4.7.5(Ink adhesion for printed containers)	-	500.00	nil
4.7.6(Product Resistance of printed containers)	-	500.00	nil
4.7.7(Migration test)	-	1200.00	nil
5(Marking)	-	0	nil

31 Dec, 2026

-
-

8323

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET) : IPT-BHUBANESWAR

5102634

IS 16098 Part 1 (2013)

Structured-Wall Plastics Piping Systems for Non-Pressure Drainage and Sewerage Part 1 Pipes and Fittings With Smooth External Surface, Type A

94400.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.3.1(Dimension of Pipes and Fittings Diameter of pipe)	-	500.00	nil
6.3.2(Dimension of Pipes and Fittings Lengths of Pipe)	-	0	nil
6.3.3(Dimension of Pipes and Fittings Diameters of Pipes and Spigots of Pipes orFittings)	-	0	nil
7.0(Physical characteristics for pipes and fittings Appearance)	-	0	nil
7.1.1(Physical characteristics for pipes and fittings Colour of Finished Pipes)	-	500.00	nil
7.2(Physical characteristics for pipes and fittings )	-	500.00	nil
7.3(Physical characteristics for pipes and fittings )	-	0	nil
8.1.1(Mechanical Characteristics of Pipes General)	-	500.00	nil
8.1.2 (a)(Mechanical Characteristics of Pipes Ring Flexibility)	-	1100.00	nil
8.1.2 (b)(Mechanical Characteristics of Pipes Ring Flexibility)	-	1100.00	nil
8.1.2 (c)(Mechanical Characteristics of Pipes Ring Flexibility)	-	0	nil
8.1.2 (d)(Mechanical Characteristics of Pipes Ring Flexibility)	-	0	nil
8.1.2 (e)(Mechanical Characteristics of Pipes Ring Flexibility)	-	0	nil
8.3(Joints)	-	1200.00	specimen preparation:500.00
5.1(Composition of the material)	-	0	nil
6.3(Dimensions of pipes and fittings)	-	500.00	nil
6.3.1 Table 2(Mean outside diameter)	-	0	nil
7.4(Resistance to Dichloromethane)	-	1000.00	nil
7.5(longitudinal reversion)	-	1200.00	specimen preparation :500.00
8.1(Appearance and colour)	-	500.00	nil
8.2(Vicat softening temperature of fittings)	-	1100.00	nil
8.3(Effect of Heating (Stress Relief Test))	-	700.00	nil
9.1(Ring stiffness)	-	1600.00	specimen prepartation : 500.00
9.2(Resistance to external blows at o C)	-	1600.00	specimen preparation:500.00
9.3(Ring flexibility)	-	1100.00	nil
9.4(Creep ratio)	-	26600.00	conditioning charge :25500.00
10.1(Impact Strength of Injection Moulded and Fabricated Fittings)	-	1100.00	nil
11.1(Elastomeric Sealing Rings)	-	1350.00	conditioning charge : 500.00
11.2(Solvent cement)	-	1350.00	conditioning charge : 500.00
12.1.1(Tightness of Elastomeric Sealing Ring Joints (Water pressure))	-	1350.00	nil
12.1.2(Tightness of Elastomeric Sealing Ring Joints (Internal Vaccum ))	-	2300.00	nil
12.1.3(Resistance to Combined Temperature Cycling and External Loading)	-	39000.00	nil
12.2.1(Tightness of Solvent cemented Ring Joints )	-	1350.00	-
12.2.2(Tightness of Solvent cemented Ring Joints (Vaccum pressure))	-	2300.00	nil
7.6(7.6 Effect on Water)	-	3000.00	nil

31 Dec, 2026

-
-

8324

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET) : IPT-BHUBANESWAR

5102634

IS 7328 (2020)

Specification for Polyethylene Material for Moulding and Extrusion ( Third Revision )

NIL

13750.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.1.1(Density)	-	1325.00	specimen preparation : 625.00
5.2.1.2(MFI)	-	1100.00	nil
5.4.3 10 ofIS 2530(Carbon black content)	-	925.00	nil
5.5.6 IS 2530(Carbon black dispersion)	-	700.00	nil
5.5.2(When the products are used in contact with foodstuffs, pharmaceuticals and drinking water, its requirements with respect to the material shall also be met as per 3.3, 3.4 and 3.5 of IS 10146.)	-	2200.00	nil
5.4.2 13 ofIS 2530(Colour fastness to water)	-	1750.00	nil
5.4.35 15 ofIS 2530(Colour fastness to daylight)	-	850.00	nil
5.4.1 12 of IS 2530(Colour bleeding)	-	2000.00	nil
5.5.6(Dispersion of Carbon Black for Black Compound of IS 2530)	-	700.00	nil
Clause 6.4.2(Overall Migration, IS 9845, Annex D.2)	-	2200.00	conditioning charge : 500.00

31 Dec, 2026

-
-

8325

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET) : IPT-BHUBANESWAR

5102634

IS 17423 (2021)

Medical Textiles Bio-Protective Coveralls Specification (First Revision)

Medicle Textile coverall for COVID-19

10700.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl- 4.4, 5.2, 5.3, 5.4, 5.5 and 7.1, Table-1 (i)(Resistance to penetration by blood and body fluids (synthetic blood penetration resistance), procedure d (see note 1))	-	5500.00	NIL
Cl- 4.4, 5.2, 5.3, 5.4, 5.5 and 7.1, Table-1 (iv)(Tensile strength (dry and wet) (N))	-	1600.00	Specimen preparation 500.00
Cl- 4.4, 5.2, 5.3, 5.4, 5.5 and 7.1, Table-1 (v)(Seam strength (dry and wet) (N) (see note 2))	-	1100.00	NIL
Cl- 4.4, 5.2, 5.3, 5.4, 5.5 and 7.1 Table-1 (vi)(Bursting strength (dry and wet) (kPa))	-	1500.00	Specimen preeparation : 500.00
Cl-4.4(Coverall)	-	1000.00	nil

31 Dec, 2026

-
-

8326

BIS, Patna Branch Laboratory (PBL)

None

IS 12594 (1988)

Hot - Dip zinc coating on structural steel bars for concrete reinforcement - Specification

2200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

-
All test facilities are available for this IS except- i. Tests for micralloying elements (Clause 4.1) ii. Adhesion of Galvanized Coating (Clause 5.3)

8327

BIS, Patna Branch Laboratory (PBL)

None

IS 13502 (1992)

Pig iron - Specification

Rs.-5920 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

-
Test facility for Chromium and other alloying elements is not available (Clause 3.1)

8328

BANGALORE ANALYTICAL RESEARCH CENTER (P) LTD, BENGALURU

6174606

IS 14543 (2024)

Packaged Drinking Water Other than Packaged Natural Mineral Water Specification Third Revision

15600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	150	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.3(Appearance)	-	0	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4/Annex D/i(P,P-DDT)	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4/Annex D/ii(Lindane)	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4/Annex D/iv(b-Endosulfan)	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4/Annex D/xvi(Dieldrin)	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4/Annex D/xvi(Aldrin)	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4/Annex D/i(O,P-DDT)	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4/Annex D/iv(a-Endosulfan)	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4/Annex D/iii(d-HCH)	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4/Annex D/i(O,P-DDD)	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4/Annex D/i(P,P-DDE)	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4/Annex D/i(O,P-DDE)	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4/Annex D/iii(a-HCH)	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4/Annex D/iii(β- HCH)	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4/Annex D/iv(Endosulfan sulfate)	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4/Annex D/i(P,P-DDD)	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4/Annex D/xii(Alachlor)	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4/Annex D/vii(Chlorpyrifos)	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4/Annex D/x(Butachlor)	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4/Annex D/vi(Ethion)	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4/Annex D/xiv(Methyl parathion)	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4/Annex D/xv(Malathion)	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4/Annex D/viii(Phorate)	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4/Annex D/v(Monochrotophos)	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4/Annex D/xiii(Atrazine)	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4/Annex D/viii(Phorate sulphoxide)	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4/Annex D/viii(Phorate sulfone)	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4/Annex D/xxvii(Methyl paraoxon)	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4/Annex D/xxviii(Malaoxon)	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4/Annex D/xi(Isoproturon)	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4/Annex D/ix(2,4 –D)	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
Cl-5.1(General Requirements)	-	0	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	500	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
Cl-5.2.2(Coliform)	-	500	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
Cl-5.2.3(Staphylococcus aureus)	-	250	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	500	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
Cl-5.2.5(Pseudomonas Aeruginosa)	-	500	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	250	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
Cl-5.2.7(Yeast and mould)	-	250	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
Cl-5.2.8(Salmonella)	-	500	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
Cl-5.2.9(Vibrio cholera)	-	250	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
Cl-5.3, Table-1 (ii)(Odour)	-	150	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
Cl-5.3, Table-1 (iii)(Taste)	-	150	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	150	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	200	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
Cl-5.3, Table-1 (vi)(pH)	-	150	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	300	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	300	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	300	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	300	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	300	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	300	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	300	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	300	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	300	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	300	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	300	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	300	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	300	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	300	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	300	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	300	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	300	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	300	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	300	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
Cl-5.3, Table-2 (xx)(Mineral oil)	-	300	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	300	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
Cl-5.3, Table-2 (xxii)(Sulphide)	-	300	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	300	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	300	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	2000	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	300	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	300	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	300	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	300	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	300	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	300	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	300	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	750	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	750	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
Cl-5.3, Table-3 (x)(Uranium)	-	1800	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
Cl-5.4 (ii)(Total pesticide residue)	-	3000	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
Cl-5.2.3(Faecal streptococci)	-	250	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
Cl-5.2.8(shigella)	-	250	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
Cl-5.2.9(V.parahaemolyticus)	-	250	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.2.6(Aerobic Microbial Count @ 20 to 22 deg C)	-	250	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4 i)(Dieldrin)	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4 i)(Aldrin)	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4 i)(Malathion)	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4, i)("oxygen analogue of Malathion (Malaoxon)")	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4 i)(Methyl Paraoxon)	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4 i)(Methyl Parathion)	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4 i)(Atrazine)	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4 i)(Alachlor)	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4 i)(Isoproturon)	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4 i)(Butachlor)	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4 i)(2,4-D)	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4 i)(Phorate sulphone)	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4 i)(Phorate sulphoxide)	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4 i)(Phorate)	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4 i)(Chlorpyrifos)	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4 i)(Ethion)	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4 i)(Monocrotophos)	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4 i)(Endosulfan Sulphate)	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4 i)(beta-Endosulfan)	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4 i)(alpha-Endosulfan)	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4 i)(Delta-HCH)	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4 i)(beta-HCH)	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4 i)(alpha-HCH)	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4 i)(Gamma-HCH (Lindane))	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4 i)(p,p DDD)	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4 i)(o,p DDD)	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4 i)(p,p DDE)	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4, i)(o,p DDE)	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4 i)(p,p DDT)	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
5.4 i)(o,p DDT)	-	100	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
Table 3, x)(Uranium)	-	1800	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)
Cl-5.4 (i)(Pesticide residues considered individually)	-	3000	Testing Charges: (1) Rs. 15600 (For complete testing excluding radioactive elements) (2) Rs - 2100 (For Microbiology) (3) Rs - 8500 (For Chemical testing including uranium) (4) Rs - 5000 (For Pesticides only)

14 Nov, 2026

-
Included.w.e.f.26.12.2024 Exclusion Cl-5.3, Table-4 (i) (Alpha emitters, Becquerel (Bq/l)) Cl-5.3, Table-4 (ii) (Beta emitters, Becquerel (Bq/l),)

8329

BIS, Patna Branch Laboratory (PBL)

None

IS 2191 : Part 2 (2022)

WOODEN FLUSH DOOR SHUTTERS (CELLULAR, HOLLOW AND TUBULAR CORE TYPE) - SPECIFICATION PART 2 PARTICLE BOARD, HIGH DENSITY FIBRE BOARD, MEDIUM DENSITY FIBRE BOARD AND FIBRE HARDBOARD FACE PANELS (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-5 (Sizes and Tolerances)	-
Cl-10.3 (Glue Adhesion Test)	-
Cl-6.1. (Timber)	-
Cl-6.2 (Laminated veneer lumber (LVL), veneer laminated lumber (VLL), medium density fibre board (MDF), high density fibre board (HDF))	-
Cl-6.3.1 (Particle board)	-
Cl-6.3.2 (MDF board and HDF board)	-
Cl-6.3.5 (shutters with fibre hardboard face)	-
Cl-8.1 (Locks)	-
Cl-10.2 (End Immersion Test)	-

-
All test facilities are available as per the IS except- I. Varying Humidity Test (Clause 11.11)

8330

BIS, Patna Branch Laboratory (PBL)

None

IS 5460 (2022)

SOFTBALL SPECIFICATION

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.4.2 (Shape, Dimensions And Weight)	-
Cl.5 (Construction and Workmanship)	-

-
All test facilities are available as per the IS

8331

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY - CIPET, HALDIA

5116334

IS 16703 (2017)

Textiles - High density polyethylene (HDPE) polypropylene (PP) woven sacks for packaging of 25 kg polymer materials - Specification

All

24754.98 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Mass of Bale)	-	0	-
5.2 Table 1(Dimensions)	-	500	Discount of 25 % is applicable on total test charges only for BIS.
5.2 Table 1(Dimensions)	-	0	-
5.2 Table 1(Dimensions)	-	0	-
5.2 Table 1(Dimensions)	-	0	-
5.2 Table 1(Ends per dm)	-	500	Discount of 25 % is applicable on total test charges only for BIS.
5.2 Table 1(Picks per dm)	-	0	-
5.2 Table 1(Mass of sack, Gusseted type, g - IS 1964)	-	500	Discount of 25 % is applicable on total test charges only for BIS.
5.2 Table 1(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N) (kgf): - IS 1969 (Part 1))	-	1599.98	Test charges 1100 + specimen charges 500) Discount of 25 % is applicable on total test charges only for BIS.
5.2 Table 1(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N2) (kgf): - IS 1969 (Part 1))	-	1100	Discount of 25 % is applicable on total test charges only for BIS.
5.2 Table 1(Breaking strength of bottom seam (Ravelled strip method), Min, N) (kgf) - IS 9030)	-	1599.99	Test charges 1100 + specimen charges 500) Discount of 25 % is applicable on total test charges only for BIS.
5.2 Table 1(Elongation at break of fabric (Ravelled strip method), percent : IS 1969 (Part 1))	-	0	-
5.2 Table 1(Elongation at break of fabric (Ravelled strip method), percent : IS 1969 (Part 1))	-	0	-
5.2 Table 1(Drop impact strength)	-	1600	Test charges 1100 + specimen charges 500) Discount of 25 % is applicable on total test charges only for BIS.
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,a) For UV stabilized sacks)	-	1200	Discount of 25 % is applicable on total test charges only for BIS.
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,b) For non- UV stabilized sacks)	-	0	-
4.6(Capacity)	-	0	-
4.3.1(Bottom Seam)	-	5600	Test charges 5100 + specimen charges 500) Discount of 25 % is applicable on total test charges only for BIS.
4.3(Sacks)	-	500	Discount of 25 % is applicable on total test charges only for BIS.
4.2,5.1,5.2,5.3,5.4(Breaking strenght after U.V. Exposure (Warp/Weft))	-	2700	Test charges 2200 + specimen charges 500) Discount of 25 % is applicable on total test charges only for BIS.
4.2,5.1,5.2,5.3,5.4,(UV Resistance (192 hrs)(100 x 65+92x40))	-	10180	-
4.2(Linear Density)	-	700	Discount of 25 % is applicable on total test charges only for BIS.
4.2(Width of tape)	-	499.99	Discount of 25 % is applicable on total test charges only for BIS.

14 Dec, 2027

-
Included. w.e.f.10.12.2024

8332

CIPET, Madurai

6139834

IS 12100 (1987)

Specification for high density polyethylene (HDPE) woven sacks for packing flour

5-25 Kg

12013 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1, Table 1(Breaking strength of fabric on 5 × 20 cm strip, Widthwise)	-	1100	25% Discount for BIS on Testing Charges Only + Specimen Preparation Charges : Rs. 500
3.1, Table 1(Breaking strength of fabric on 5 × 20 cm strip, Lengthwise)	-	1100	25% Discount for BIS on Testing Charges Only + Specimen Preparation Charges : Rs. 500
3.1, Table 1(Seam breaking strength, Side team)	-	1100	25% Discount for BIS on Testing Charges Only + Specimen Preparation Charges : Rs. 500
3.1, Table 1(Seam breaking strength, Bottom team)	-	1100	25% Discount for BIS on Testing Charges Only + Specimen Preparation Charges : Rs. 500
3.2(Dimensions)	-	500	25% Discount for BIS on Testing Charges Only
3.3(Mass)	-	500	25% Discount for BIS on Testing Charges Only

22 May, 2027

-
Included w.e.f. 20.08.2024

8333

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY - CIPET, HALDIA

5116334

IS 16208 (2015)

Textiles - High density polyethylene (HDPE)/polypropylene (PP) woven sacks for packaging 10 kg, 15 kg, 20 kg, 25 kg and 30 kg foodgrains - Specification

All

24255 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(TYPES)	-	0	-
4.1(Raw Material)	-	4200	(Test charges 3700 + specimen charges 500) Discount of 25 % is applicable on total test charges only for BIS. 1. Identification = 2000 2. Migration = 1700
4.2(Tapes – Width IS 6192 and IS 11197)	-	500	Discount of 25 % is applicable on total test charges only for BIS.
4.2(Tapes – Linear Density )	-	700	Discount of 25 % is applicable on total test charges only for BIS.
4.2(Construction)	-	500	Discount of 25 % is applicable on total test charges only for BIS.
4.3(Sacks)	-	500	Discount of 25 % is applicable on total test charges only for BIS.
4.3.1(Bottom Seam)	-	500	Discount of 25 % is applicable on total test charges only for BIS.
4.3.1( The two rows of stitches shall be separated from each other)	-	0	-
4.3.1( The outer stitch)	-	0	-
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	0	-
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	0	-
4.3.1(The number of stitches/dm)	-	0	-
4.3.2(Mouth)	-	500	Discount of 25 % is applicable on total test charges only for BIS.
4.4 and Table 1 i(Capacity)	-	500	Discount of 25 % is applicable on total test charges only for BIS.
5.2 and Table 1 ii a(Dimensions Inside Length)	-	499.98	Discount of 25 % is applicable on total test charges only for BIS.
5.2 and Table 1 ii b(Dimensions Inside Width)	-	0	-
5.2 and Table 1 iii(Ends per dm )	-	500	Discount of 25 % is applicable on total test charges only for BIS.
5.2 and Table 1 iv(Picks per dm )	-	0	-
5.1 and Table 1 v(Mass of sack )	-	500	Discount of 25 % is applicable on total test charges only for BIS.
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	1600	(Test charges 1100 + specimen charges 500) Discount of 25 % is applicable on total test charges only for BIS.
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise )	-	1100	Discount of 25 % is applicable on total test charges only for BIS.
5.2 and Table 1 vi(Breaking strength of bottom seam )	-	1600.01	(Test charges 1100 + specimen charges 500) Discount of 25 % is applicable on total test charges only for BIS.
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise)	-	0	-
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise )	-	0	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	0	-
5.2 and Table 1 x(Ash content )	-	1200	Discount of 25 % is applicable on total test charges only for BIS.
3(TYPES)	-	0	-
4.1(Raw Material)	-	0	-
4.2(Tapes – Width IS 6192 and IS 11197)	-	0	-
4.2(Tapes – Linear Density )	-	0	-
4.2(Construction)	-	0	-
4.3(Sacks)	-	0	-
4.3.1(Bottom Seam)	-	0	-
4.3.1( The two rows of stitches shall be separated from each other)	-	0	-
4.3.1( The outer stitch)	-	0	-
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	0	-
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	0	-
4.3.1(The number of stitches/dm)	-	0	-
4.3.2(Mouth)	-	0	-
4.4 and Table 1 i(Capacity)	-	0	-
5.2 and Table 1 ii a(Dimensions Inside Length)	-	0	-
5.2 and Table 1 ii b(Dimensions Inside Width)	-	0	-
5.2 and Table 1 iii(Ends per dm )	-	0	-
5.2 and Table 1 iv(Picks per dm )	-	0	-
5.1 and Table 1 v(Mass of sack )	-	0	-
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	0	-
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise )	-	0	-
5.2 and Table 1 vi(Breaking strength of bottom seam )	-	0	-
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise)	-	0	-
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise )	-	0	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	12880	(Test charges 2200 ) Discount of 25 % is applicable on total test charges only for BIS. 1. UV Exposure =10180 2. specimen charges = 500
5.2 and Table 1 x(Ash content )	-	0	-
4.2 (Mesh size and weight in g/cm2) (amendment 3)(Mesh size and weight in g/cm2)	-	500	Discount of 25 % is applicable on total test charges only for BIS.

14 Dec, 2027

-
Included w.e.f.10.12.2024

8334

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 210 (2009)

Grey iron castings - Specification (First Revision)

4050 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Chemical Composition(chemical composition shall be as agreed to between the purchaser and the manufacturer.))	-	4050	4050/-
7.1(WORKMANSHIP AND FINISH)	-	4050	4050/-
10.1(FREEDOM FROM DEFECTS)	-	4050	4050/-
10.2(FREEDOM FROM DEFECTS)	-	4050	4050/-
13(SIZE OF TEST BARS-Diameter)	-	4050	4050/-
13(SIZE OF TEST BARS-Length)	-	4050	4050/-
15, Table 3(TENSIL.E TEST- IS 1608 Part1 )	-	4050	4050/-
16, Table 3(Hardness Test)	-	4050	4050/-
17,Annex B(TRANSVERSE TEST)	-	4050	4050/-
18(HYDROSTATIC TEST)	-	4050	4050/-
9(IS 7754)	-	4050	4050/-
9(Microstructure)	-	4050	4050/-
6(Chemical Composition(chemical composition shall be as agreed to between the purchaser and the manufacturer.))	-	1000	-
7.1(WORKMANSHIP AND FINISH)	-	50	-
10.1(FREEDOM FROM DEFECTS)	-	50	-
10.2(FREEDOM FROM DEFECTS)	-	50	-
13(SIZE OF TEST BARS-Diameter)	-	50	-
13(SIZE OF TEST BARS-Length)	-	50	-
15, Table 3(TENSIL.E TEST- IS 1608 Part1 )	-	650	-
16, Table 3(Hardness Test)	-	500	-
17,Annex B(TRANSVERSE TEST)	-	500	-
18(HYDROSTATIC TEST)	-	700	-
9(IS 7754)	-	500	-
9(Microstructure)	-	500	-

31 Dec, 2029

-
-

8335

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY - CIPET, HALDIA

5116334

IS 18482 (2023)

Textiles - Sandwich extrusion laminated polypropylene PP woven sacks for packaging bulk commodities - Specification

All

26017.98 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Sack Type)	-	500	Discount of 25 % is applicable on total test charges only for BIS.
5.2.1(Fabric)	-	500	Discount of 25 % is applicable on total test charges only for BIS.
5.2.2(Linear density of tapes)	-	700	Discount of 25 % is applicable on total test charges only for BIS.
5.2.4(Unlaminated fabric mass)	-	500	Discount of 25 % is applicable on total test charges only for BIS.
5.3.1.1.1(Mass of BOPP film in sandwich extrusion lamination)	-	500	Discount of 25 % is applicable on total test charges only for BIS.
5.3.1.1.2(Polypropylene coating mass for sandwich extrusion lamination of BOPP film with base PP woven fabric)	-	0	-
5.3.1.1.3(Total mass of BOPP film laminated woven fabric)	-	500	Discount of 25 % is applicable on total test charges only for BIS.
5.3.1.2.1(Mass of nonwoven fabric in sandwich extrusion lamination)	-	0	-
5.3.1.2.2(Polypropylene coating mass for sandwich extrusion lamination of non woven fabric with base PP woven fabric)	-	0	-
5.3.1.2.3(The total mass of nonwoven laminated woven fabric)	-	500	Discount of 25 % is applicable on total test charges only for BIS.
5.4.1(Sack)	-	500	Discount of 25 % is applicable on total test charges only for BIS.
5.4.1.1(Centre seam)	-	500	Discount of 25 % is applicable on total test charges only for BIS.
5.4.1.2(Bottom seam)	-	500	Discount of 25 % is applicable on total test charges only for BIS.
5.4.2(Sack)	-	0	-
5.4.3(Sack)	-	0	-
5.4.5(Liner)	-	3000	Discount of 25 % is applicable on total test charges only for BIS. 1. Identification=2000 2.Thickness & width of liner =500 3. Visual of liner =500
6.1.1, Table 1(Inside length)	-	500	Discount of 25 % is applicable on total test charges only for BIS.
6.1.1, Table 1(Inside width)	-	0	-
6.1.1, Table 1(Gusset width)	-	500	Discount of 25 % is applicable on total test charges only for BIS.
6.1.1, Table 1(Warp per dm)	-	500	Discount of 25 % is applicable on total test charges only for BIS.
6.1.1, Table 1(Weft per dm)	-	500	Discount of 25 % is applicable on total test charges only for BIS.
6.1.1, Table 1(Mass of laminated fabric)	-	500	Discount of 25 % is applicable on total test charges only for BIS.
6.2, Table 1(Average breaking strength - Lengthwise)	-	1600	(Test charges1100 + specimen charges 500) Discount of 25 % is applicable on total test charges only for BIS.
6.2, Table 1(Average breaking strength - Widthwise)	-	1100	Discount of 25 % is applicable on total test charges only for BIS.
6.2, Table 1(Breaking strength of bottom seam)	-	1100	Discount of 25 % is applicable on total test charges only for BIS.
6.2, Table 1(Breaking strength of centre seam)	-	1100	Discount of 25 % is applicable on total test charges only for BIS.
6.2, Table 1(Average elongation at break of fabric - Lengthwise)	-	0	-
6.2, Table 1(Average elongation at break of fabric - Widthwise)	-	0	-
6.3(Average breaking strength - Lengthwise after UV exposure)	-	11280	(Test charges1100 + specimen charges 10180) Discount of 25 % is applicable on total test charges only for BIS.
6.3(Average breaking strength - Widthwise after UV exposure)	-	1100	Discount of 25 % is applicable on total test charges only for BIS.
6.4(Drop Impact Testing of Filled Sacks)	-	850	Discount of 25 % is applicable on total test charges only for BIS.
Clause 5.4.5.3("Free from pin holes (except for air removal perforations), patches, tears, blisters, and any other visible defects")	-	0	-
Clause 6.2.2(Stitch strength)	-	0	-
Clause 6.2.2(Weld seam strength)	-	1100	Discount of 25 % is applicable on total test charges only for BIS.
Clause 5.4.5.3("Free from pin holes (except for air removal perforations), patches, tears, blisters, and any other visible defects")	-	0	-
Clause 6.2.2(Stitch strength)	-	0	-
Clause 6.2.2(Weld seam strength)	-	0	-
Clause 6.5 Table 1 viii(Ash content)	-	1200	Discount of 25 % is applicable on total test charges only for BIS.

14 Dec, 2027

-
Included w.e.f.10.12.2024

8336

BIS, Southern Regional Laboratory (SRL)

None

IS 2347 (2023)

DOMESTIC PRESSURE COOKER ï¿½ SPECIFICATION

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Gross capacity)	-
8.15.2 (Ball Drop Test )	-

-
" 1 No Excluding Excl Temp. Responsive Pressure Relief Device, Chromium over nickel plating, External Coating, Internal Coating and Chemical tests

8337

URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA

8168906

IS 1660 (2024)

Wrought and Cast Aluminium Utensils Specification ( Second Revision )

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3.1.1, 3.1.2(Minimum Thickness of Sheet)	-	300	-
Cl-3.1.3, Table-2(Minimum Thickness at the Bottom)	-	300	-
Cl-3.1.3, Table-2(Minimium Thickness of Wall at the Top Edge)	-	300	-
Cl-3.1.3, Table-2(Minimum Cover Thickness)	-	300	-
Cl-4.1(Main body of utensil)	-	300	-
Cl-4.1(Cast cookware)	-	300	-
Cl-4.1(Other aluminum components and parts)	-	300	-
Cl-4.1.1(Lids (material))	-	300	-
Cl-4.1.1(Minimum thickness of lid)	-	300	-
Cl-4.1.2(Minimum thickness of glass)	-	300	-
Cl-4.1.2(Material of rim)	-	300	-
Cl-4.1.2(Minimum thickness of rim)	-	300	-
Cl-4.2(Material of strips)	-	300	-
Cl-4.2(Stainless steel handles, rivets and fittings)	-	300	-
Cl-4.3(Clips of lunch box)	-	300	-
Cl-4.3(Clips of lunch box)	-	300	-
Cl-4.3(Rivets used in lunch box)	-	300	-
Cl-4.4(Screws, studs/nuts, and locking loop)	-	300	-
Cl-4.5(Rivets for fixing of handles)	-	300	-
Cl-4.5(Material of cap)	-	300	-
Cl-4.6(Strips used for flame guards)	-	300	-
Cl-4.6(stainless steel)	-	300	-
Cl-5(Fabrication)	-	300	-
Cl-6(Shape and Dimensions)	-	300	-
Cl-7.1(Handles, when fitted)	-	300	-
Cl-7.2(Handles)	-	300	-
Cl-7.3 (Cl- 4.1 of IS 13395)(Construction)	-	300	-
Cl-7.3 (Cl- 4.2 of IS 13395)(Materials)	-	300	-
Cl-7.3 (Cl- 4.3 of IS 13395)(Selection and Size)	-	300	-
Cl-7.3 (Cl- 4.4 of IS 13395)(Position of Handle and Knob with Respect to Cookware)	-	300	-
Cl-7.3 (Cl- 4.5 of IS 13395)(Attachment to Cookware)	-	300	-
Cl-7.3 (Cl- 5.2 of IS 13395)(Bending Strength)	-	300	-
Cl-7.3 (Cl- 5.3 of IS 13395)(Torque Strength)	-	300	-
Cl-7.3 (Cl- 5.4 of IS 13395)(Impact Strength)	-	300	-
Cl-7.3 (Cl- 5.5 of IS 13395)(Fatigue Resistance)	-	300	-
Cl-7.3 (Cl- 5.6 of IS 13395)(Leakage)	-	300	-
Cl-7.3 (Cl- 5.7 of IS 13395)(Thermal Insulation)	-	300	-
Wrought and Cast Aluminium Utensils — Specification(Heat Resistance)	-	300	-
Cl-7.3 (Cl- 5.9 of IS 13395)(Washing Resistance (Type Test))	-	300	-
Cl-7.3 (Cl- 5.10 of IS 13395)(Burning Resistance)	-	300	-
Cl-8(Workmanship and Finish)	-	300	-
Cl-8.3(Utensils, if anodized, fully or partially)	-	300	-
Cl-8.3(Minimum nominal thickness)	-	300	-
Cl-8.3(Thickness of hard anodized)	-	300	-
Cl-8.3(Finish and appearance of hard anodized)	-	300	-
Cl-8.3(Abrasion resistance of hard anodized)	-	100	-
Cl-8.3(Colour of hard anodized)	-	100	-
Cl-8.3(Hardness of hard anodized)	-	100	-
Wrought and Cast Aluminium Utensils — Specification(Lid of the cookware)	-	100	-
Cl-8.5(Non-stick unreinforced PTFE)	-	100	-
Cl-8.6(Ceramic coating)	-	100	-
Cl-8.7(The thickness test, adhesion test)	-	100	-
Cl-8.7(Minimum thickness of coating)	-	100	-
Cl-8.7.1(Dry heat the cookware)	-	100	-
Cl-8.8(Requirements of PTFE)	-	100	-
Cl-8.9(Material for induction plate)	-	100	-
Cl-8.9(Test for Induction compatible base)	-	100	-
Cl-8.10.1(Tests for Lunch Boxes- Performance Test)	-	100	-
Cl-8.10.1(Tests for Lunch Boxes- Performance Test)	-	100	-
Cl-8.10.2(Tests for Lunch Boxes- Ground Nut Oil Test for Leakage)	-	100	-
Cl-8.11.1(Test(s) on Tempered Glass Lid- Fragmentation Test)	-	100	-
Cl-8.11.2(Test(s) on Tempered Glass Lid-Ball Drop Test)	-	100	-
Cl-8.11.3(Test(s) on Tempered Glass Lid- Thermal Shock Test)	-	100	-
Cl-8.11.4(Test(s) on Tempered Glass Lid- Free Fall Test)	-	100	-
Cl-9.1(Normal Capacity)	-	100	-
Cl-9.2(Normal Capacity of internal diameter)	-	100	-
Cl-3.1.1, 3.1.2(Minimum Thickness of Sheet)	-	300	-
Cl-3.1.3, Table-2(Minimum Thickness at the Bottom)	-	300	-
Cl-3.1.3, Table-2(Minimium Thickness of Wall at the Top Edge)	-	300	-
Cl-3.1.3, Table-2(Minimum Cover Thickness)	-	300	-
Cl-4.1(Main body of utensil)	-	300	-
Cl-4.1(Cast cookware)	-	300	-
Cl-4.1(Other aluminum components and parts)	-	300	-
Cl-4.1.1(Lids (material))	-	300	-
Cl-4.1.1(Minimum thickness of lid)	-	300	-
Cl-4.1.2(Minimum thickness of glass)	-	300	-
Cl-4.1.2(Material of rim)	-	300	-
Cl-4.1.2(Minimum thickness of rim)	-	300	-
Cl-4.2(Material of strips)	-	300	-
Cl-4.2(Stainless steel handles, rivets and fittings)	-	300	-
Cl-4.3(Clips of lunch box)	-	300	-
Cl-4.3(Clips of lunch box)	-	300	-
Cl-4.3(Rivets used in lunch box)	-	300	-
Cl-4.4(Screws, studs/nuts, and locking loop)	-	300	-
Cl-4.5(Rivets for fixing of handles)	-	300	-
Cl-4.5(Material of cap)	-	300	-
Cl-4.6(Strips used for flame guards)	-	300	-
Cl-4.6(stainless steel)	-	300	-
Cl-5(Fabrication)	-	300	-
Cl-6(Shape and Dimensions)	-	300	-
Cl-7.1(Handles, when fitted)	-	300	-
Cl-7.2(Handles)	-	300	-
Cl-7.3 (Cl- 4.1 of IS 13395)(Construction)	-	300	-
Cl-7.3 (Cl- 4.2 of IS 13395)(Materials)	-	300	-
Cl-7.3 (Cl- 4.3 of IS 13395)(Selection and Size)	-	300	-
Cl-7.3 (Cl- 4.4 of IS 13395)(Position of Handle and Knob with Respect to Cookware)	-	300	-
Cl-7.3 (Cl- 4.5 of IS 13395)(Attachment to Cookware)	-	300	-
Cl-7.3 (Cl- 5.2 of IS 13395)(Bending Strength)	-	300	-
Cl-7.3 (Cl- 5.3 of IS 13395)(Torque Strength)	-	300	-
Cl-7.3 (Cl- 5.4 of IS 13395)(Impact Strength)	-	300	-
Cl-7.3 (Cl- 5.5 of IS 13395)(Fatigue Resistance)	-	300	-
Cl-7.3 (Cl- 5.6 of IS 13395)(Leakage)	-	300	-
Cl-7.3 (Cl- 5.7 of IS 13395)(Thermal Insulation)	-	300	-
Wrought and Cast Aluminium Utensils — Specification(Heat Resistance)	-	300	-
Cl-7.3 (Cl- 5.9 of IS 13395)(Washing Resistance (Type Test))	-	300	-
Cl-7.3 (Cl- 5.10 of IS 13395)(Burning Resistance)	-	300	-
Cl-8(Workmanship and Finish)	-	300	-
Cl-8.3(Utensils, if anodized, fully or partially)	-	300	-
Cl-8.3(Minimum nominal thickness)	-	300	-
Cl-8.3(Thickness of hard anodized)	-	300	-
Cl-8.3(Finish and appearance of hard anodized)	-	300	-
Cl-8.3(Abrasion resistance of hard anodized)	-	300	-
Cl-8.3(Colour of hard anodized)	-	300	-
Cl-8.3(Hardness of hard anodized)	-	300	-
Wrought and Cast Aluminium Utensils — Specification(Lid of the cookware)	-	300	-
Cl-8.5(Non-stick unreinforced PTFE)	-	300	-
Cl-8.6(Ceramic coating)	-	300	-
Cl-8.7(The thickness test, adhesion test)	-	300	-
Cl-8.7(Minimum thickness of coating)	-	300	-
Cl-8.7.1(Dry heat the cookware)	-	300	-
Cl-8.8(Requirements of PTFE)	-	300	-
Cl-8.9(Material for induction plate)	-	300	-
Cl-8.9(Test for Induction compatible base)	-	300	-
Cl-8.10.1(Tests for Lunch Boxes- Performance Test)	-	300	-
Cl-8.10.1(Tests for Lunch Boxes- Performance Test)	-	300	-
Cl-8.10.2(Tests for Lunch Boxes- Ground Nut Oil Test for Leakage)	-	300	-
Cl-8.11.1(Test(s) on Tempered Glass Lid- Fragmentation Test)	-	300	-
Cl-8.11.2(Test(s) on Tempered Glass Lid-Ball Drop Test)	-	300	-
Cl-8.11.3(Test(s) on Tempered Glass Lid- Thermal Shock Test)	-	300	-
Cl-8.11.4(Test(s) on Tempered Glass Lid- Free Fall Test)	-	300	-
Cl-9.1(Normal Capacity)	-	300	-
Cl-9.2(Normal Capacity of internal diameter)	-	300	-
Cl-3.1.1, 3.1.2(Minimum Thickness of Sheet)	-	300	-
Cl-3.1.3, Table-2(Minimum Thickness at the Bottom)	-	300	-
Cl-3.1.3, Table-2(Minimium Thickness of Wall at the Top Edge)	-	300	-
Cl-3.1.3, Table-2(Minimum Cover Thickness)	-	300	-
Cl-4.1(Main body of utensil)	-	300	-
Cl-4.1(Cast cookware)	-	300	-
Cl-4.1(Other aluminum components and parts)	-	300	-
Cl-4.1.1(Lids (material))	-	300	-
Cl-4.1.1(Minimum thickness of lid)	-	300	-
Cl-4.1.2(Minimum thickness of glass)	-	300	-
Cl-4.1.2(Material of rim)	-	300	-
Cl-4.1.2(Minimum thickness of rim)	-	300	-
Cl-4.2(Material of strips)	-	300	-
Cl-4.2(Stainless steel handles, rivets and fittings)	-	300	-
Cl-4.3(Clips of lunch box)	-	300	-
Cl-4.3(Clips of lunch box)	-	300	-
Cl-4.3(Rivets used in lunch box)	-	300	-
Cl-4.4(Screws, studs/nuts, and locking loop)	-	300	-
Cl-4.5(Rivets for fixing of handles)	-	300	-
Cl-4.5(Material of cap)	-	300	-
Cl-4.6(Strips used for flame guards)	-	300	-
Cl-4.6(stainless steel)	-	300	-
Cl-5(Fabrication)	-	300	-
Cl-6(Shape and Dimensions)	-	300	-
Cl-7.1(Handles, when fitted)	-	300	-
Cl-7.2(Handles)	-	300	-
Cl-7.3 (Cl- 4.1 of IS 13395)(Construction)	-	300	-
Cl-7.3 (Cl- 4.2 of IS 13395)(Materials)	-	300	-
Cl-7.3 (Cl- 4.3 of IS 13395)(Selection and Size)	-	300	-
Cl-7.3 (Cl- 4.4 of IS 13395)(Position of Handle and Knob with Respect to Cookware)	-	300	-
Cl-7.3 (Cl- 4.5 of IS 13395)(Attachment to Cookware)	-	300	-
Cl-7.3 (Cl- 5.2 of IS 13395)(Bending Strength)	-	300	-
Cl-7.3 (Cl- 5.3 of IS 13395)(Torque Strength)	-	300	-
Cl-7.3 (Cl- 5.4 of IS 13395)(Impact Strength)	-	300	-
Cl-7.3 (Cl- 5.5 of IS 13395)(Fatigue Resistance)	-	300	-
Cl-7.3 (Cl- 5.6 of IS 13395)(Leakage)	-	300	-
Cl-7.3 (Cl- 5.7 of IS 13395)(Thermal Insulation)	-	300	-
Wrought and Cast Aluminium Utensils — Specification(Heat Resistance)	-	300	-
Cl-7.3 (Cl- 5.9 of IS 13395)(Washing Resistance (Type Test))	-	300	-
Cl-7.3 (Cl- 5.10 of IS 13395)(Burning Resistance)	-	300	-
Cl-8(Workmanship and Finish)	-	300	-
Cl-8.3(Utensils, if anodized, fully or partially)	-	300	-
Cl-8.3(Minimum nominal thickness)	-	300	-
Cl-8.3(Thickness of hard anodized)	-	300	-
Cl-8.3(Finish and appearance of hard anodized)	-	300	-
Cl-8.3(Abrasion resistance of hard anodized)	-	300	-
Cl-8.3(Colour of hard anodized)	-	300	-
Cl-8.3(Hardness of hard anodized)	-	300	-
Wrought and Cast Aluminium Utensils — Specification(Lid of the cookware)	-	300	-
Cl-8.5(Non-stick unreinforced PTFE)	-	300	-
Cl-8.6(Ceramic coating)	-	300	-
Cl-8.7(The thickness test, adhesion test)	-	300	-
Cl-8.7(Minimum thickness of coating)	-	300	-
Cl-8.7.1(Dry heat the cookware)	-	300	-
Cl-8.8(Requirements of PTFE)	-	300	-
Cl-8.9(Material for induction plate)	-	300	-
Cl-8.9(Test for Induction compatible base)	-	300	-
Cl-8.10.1(Tests for Lunch Boxes- Performance Test)	-	300	-
Cl-8.10.1(Tests for Lunch Boxes- Performance Test)	-	300	-
Cl-8.10.2(Tests for Lunch Boxes- Ground Nut Oil Test for Leakage)	-	300	-
Cl-8.11.1(Test(s) on Tempered Glass Lid- Fragmentation Test)	-	300	-
Cl-8.11.2(Test(s) on Tempered Glass Lid-Ball Drop Test)	-	300	-
Cl-8.11.3(Test(s) on Tempered Glass Lid- Thermal Shock Test)	-	300	-
Cl-8.11.4(Test(s) on Tempered Glass Lid- Free Fall Test)	-	300	-
Cl-9.1(Normal Capacity)	-	300	-
Cl-9.2(Normal Capacity of internal diameter)	-	300	-
Cl-3.1.1, 3.1.2(Minimum Thickness of Sheet)	-	300	-
Cl-3.1.3, Table-2(Minimum Thickness at the Bottom)	-	300	-
Cl-3.1.3, Table-2(Minimium Thickness of Wall at the Top Edge)	-	300	-
Cl-3.1.3, Table-2(Minimum Cover Thickness)	-	300	-
Cl-4.1(Main body of utensil)	-	300	-
Cl-4.1(Cast cookware)	-	300	-
Cl-4.1(Other aluminum components and parts)	-	300	-
Cl-4.1.1(Lids (material))	-	300	-
Cl-4.1.1(Minimum thickness of lid)	-	300	-
Cl-4.1.2(Minimum thickness of glass)	-	300	-
Cl-4.1.2(Material of rim)	-	300	-
Cl-4.1.2(Minimum thickness of rim)	-	300	-
Cl-4.2(Material of strips)	-	300	-
Cl-4.2(Stainless steel handles, rivets and fittings)	-	300	-
Cl-4.3(Clips of lunch box)	-	300	-
Cl-4.3(Clips of lunch box)	-	300	-
Cl-4.3(Rivets used in lunch box)	-	300	-
Cl-4.4(Screws, studs/nuts, and locking loop)	-	300	-
Cl-4.5(Rivets for fixing of handles)	-	300	-
Cl-4.5(Material of cap)	-	300	-
Cl-4.6(Strips used for flame guards)	-	300	-
Cl-4.6(stainless steel)	-	300	-
Cl-5(Fabrication)	-	300	-
Cl-6(Shape and Dimensions)	-	300	-
Cl-7.1(Handles, when fitted)	-	300	-
Cl-7.2(Handles)	-	300	-
Cl-7.3 (Cl- 4.1 of IS 13395)(Construction)	-	300	-
Cl-7.3 (Cl- 4.2 of IS 13395)(Materials)	-	300	-
Cl-7.3 (Cl- 4.3 of IS 13395)(Selection and Size)	-	300	-
Cl-7.3 (Cl- 4.4 of IS 13395)(Position of Handle and Knob with Respect to Cookware)	-	300	-
Cl-7.3 (Cl- 4.5 of IS 13395)(Attachment to Cookware)	-	300	-
Cl-7.3 (Cl- 5.2 of IS 13395)(Bending Strength)	-	300	-
Cl-7.3 (Cl- 5.3 of IS 13395)(Torque Strength)	-	300	-
Cl-7.3 (Cl- 5.4 of IS 13395)(Impact Strength)	-	300	-
Cl-7.3 (Cl- 5.5 of IS 13395)(Fatigue Resistance)	-	300	-
Cl-7.3 (Cl- 5.6 of IS 13395)(Leakage)	-	300	-
Cl-7.3 (Cl- 5.7 of IS 13395)(Thermal Insulation)	-	300	-
Wrought and Cast Aluminium Utensils — Specification(Heat Resistance)	-	300	-
Cl-7.3 (Cl- 5.9 of IS 13395)(Washing Resistance (Type Test))	-	300	-
Cl-7.3 (Cl- 5.10 of IS 13395)(Burning Resistance)	-	300	-
Cl-8(Workmanship and Finish)	-	300	-
Cl-8.3(Utensils, if anodized, fully or partially)	-	300	-
Cl-8.3(Minimum nominal thickness)	-	300	-
Cl-8.3(Thickness of hard anodized)	-	300	-
Cl-8.3(Finish and appearance of hard anodized)	-	300	-
Cl-8.3(Abrasion resistance of hard anodized)	-	300	-
Cl-8.3(Colour of hard anodized)	-	300	-
Cl-8.3(Hardness of hard anodized)	-	300	-
Wrought and Cast Aluminium Utensils — Specification(Lid of the cookware)	-	300	-
Cl-8.5(Non-stick unreinforced PTFE)	-	300	-
Cl-8.6(Ceramic coating)	-	300	-
Cl-8.7(The thickness test, adhesion test)	-	300	-
Cl-8.7(Minimum thickness of coating)	-	300	-
Cl-8.7.1(Dry heat the cookware)	-	300	-
Cl-8.8(Requirements of PTFE)	-	300	-
Cl-8.9(Material for induction plate)	-	300	-
Cl-8.9(Test for Induction compatible base)	-	300	-
Cl-8.10.1(Tests for Lunch Boxes- Performance Test)	-	300	-
Cl-8.10.1(Tests for Lunch Boxes- Performance Test)	-	300	-
Cl-8.10.2(Tests for Lunch Boxes- Ground Nut Oil Test for Leakage)	-	300	-
Cl-8.11.1(Test(s) on Tempered Glass Lid- Fragmentation Test)	-	300	-
Cl-8.11.2(Test(s) on Tempered Glass Lid-Ball Drop Test)	-	300	-
Cl-8.11.3(Test(s) on Tempered Glass Lid- Thermal Shock Test)	-	300	-
Cl-8.11.4(Test(s) on Tempered Glass Lid- Free Fall Test)	-	300	-
Cl-9.1(Normal Capacity)	-	300	-
Cl-9.2(Normal Capacity of internal diameter)	-	300	-

-
Included w.e.f.28.07.2025

8338

ACCURATE TEST SOLUTIONS LLP (F21), NOIDA

8141226

IS 996 (2009)

Single phase a.c. induction motors for general purpose (Third Revision)

13500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
10(Type of enclosures)	-	450	5% discount to BIS
11(Methods of cooling)	-	450	5% discount to BIS
9.1(General construction (as per Cl. 9 & F-3))	-	450	5% discount to BIS
9(General construction (as per Cl. 9 & F-3))	-	450	5% discount to BIS
9.4.11(General construction (as per Cl. 9 & F-3))	-	450	5% discount to BIS
9(General construction (as per Cl. 9 & F-3))	-	450	5% discount to BIS
9.4.11(General construction (as per Cl. 9 & F-3))	-	450	5% discount to BIS
9.4.13(General construction (as per Cl. 9 & F-3))	-	450	5% discount to BIS
4.1(Rated Voltage)	-	450	5% discount to BIS
4.2(Rated Frequency)	-	450	5% discount to BIS
4.3(Rated Output)	-	450	5% discount to BIS
4.4(Rated Speed)	-	450	5% discount to BIS
7(Dimensions (Cl.App.F-4))	-	450	5% discount to BIS
9.5(Earthing)	-	450	5% discount to BIS
9.5(Earthing)	-	450	5% discount to BIS
9.5(Earthing)	-	450	5% discount to BIS
17.3 (a)(No load test at rated voltage and frequency )	-	450	5% discount to BIS
17.3 (a)(No load test at rated voltage and frequency)	-	450	5% discount to BIS
17.3 (a)(No load test at rated voltage and frequency)	-	450	5% discount to BIS
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	450	5% discount to BIS
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	450	5% discount to BIS
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	450	5% discount to BIS
12.1.1(Test for Breakaway starting current at rated voltage and frequency (Cl.12.1.1 & Cl. 12.5))	-	450	5% discount to BIS
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	450	5% discount to BIS
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	450	5% discount to BIS
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	450	5% discount to BIS
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	450	5% discount to BIS
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	450	5% discount to BIS
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	450	5% discount to BIS
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	450	5% discount to BIS
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	450	5% discount to BIS
12.7(Insulation resistance test)	-	450	5% discount to BIS
13.1(High voltage test)	-	450	5% discount to BIS
13.2(Moisture proofness)	-	450	5% discount to BIS
13.2(Moisture proofness)	-	450	5% discount to BIS
13.3(Leakage current test)	-	450	5% discount to BIS
12.6(Vibration Severity)	-	450	5% discount to BIS
15.1(ADDITIONAL TESTS (For ECO - MARK))	-	450	5% discount to BIS
15.1.5(Noise Level)	-	450	5% discount to BIS
15.2(Specific Requirements)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
10(Type of enclosures)	-	450	5% discount to BIS
11(Methods of cooling)	-	450	5% discount to BIS
9.1(General construction (as per Cl. 9 & F-3))	-	450	5% discount to BIS
9(General construction (as per Cl. 9 & F-3))	-	450	5% discount to BIS
9.4.11(General construction (as per Cl. 9 & F-3))	-	450	5% discount to BIS
9(General construction (as per Cl. 9 & F-3))	-	450	5% discount to BIS
9.4.11(General construction (as per Cl. 9 & F-3))	-	450	5% discount to BIS
9.4.13(General construction (as per Cl. 9 & F-3))	-	450	5% discount to BIS
4.1(Rated Voltage)	-	450	5% discount to BIS
4.2(Rated Frequency)	-	450	5% discount to BIS
4.3(Rated Output)	-	450	5% discount to BIS
4.4(Rated Speed)	-	450	5% discount to BIS
9.5(Earthing)	-	450	5% discount to BIS
9.5(Earthing)	-	450	5% discount to BIS
9.5(Earthing)	-	450	5% discount to BIS
17.3 (a)(No load test at rated voltage and frequency )	-	450	5% discount to BIS
17.3 (a)(No load test at rated voltage and frequency)	-	450	5% discount to BIS
17.3 (a)(No load test at rated voltage and frequency)	-	450	5% discount to BIS
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	450	5% discount to BIS
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	450	5% discount to BIS
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	450	5% discount to BIS
12.1.1(Test for Breakaway starting current at rated voltage and frequency (Cl.12.1.1 & Cl. 12.5))	-	450	5% discount to BIS
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	450	5% discount to BIS
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	450	5% discount to BIS
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	450	5% discount to BIS
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	450	5% discount to BIS
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	450	5% discount to BIS
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	450	5% discount to BIS
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	450	5% discount to BIS
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	450	5% discount to BIS
12.7(Insulation resistance test)	-	450	5% discount to BIS
13.1(High voltage test)	-	450	5% discount to BIS
13.2(Moisture proofness)	-	450	5% discount to BIS
13.2(Moisture proofness)	-	450	5% discount to BIS
13.3(Leakage current test)	-	450	5% discount to BIS
12.6(Vibration Severity)	-	450	5% discount to BIS
15.1(ADDITIONAL TESTS (For ECO - MARK))	-	450	5% discount to BIS
15.1.5(Noise Level)	-	450	5% discount to BIS
15.2(Specific Requirements)	-	450	5% discount to BIS
9.0(Observation)	-	450	5% discount to BIS
7.2(Dimensions)	-	450	5% discount to BIS
11.0(Observation)	-	450	5% discount to BIS
17.3 (j)(Observation)	-	450	5% discount to BIS
9.5(Observation)	-	450	5% discount to BIS
14.0(Observation)	-	450	5% discount to BIS
16.0(Observation)	-	450	5% discount to BIS
17.4 & 9.4.6.1(Observation)	-	450	5% discount to BIS
17.3 (k)(Current)	-	450	5% discount to BIS
17.3 (m)(Vibration)	-	450	5% discount to BIS
17.3 (g)(Insulation Resistance)	-	450	5% discount to BIS
17.3 (h)(Voltage)	-	450	5% discount to BIS
17.3 (b)(Temperature)	-	450	5% discount to BIS
17.3 (e)(Temperature)	-	450	5% discount to BIS
17.3 (f)(Torque)	-	450	5% discount to BIS
17.3 (c)(Current, Torque)	-	450	5% discount to BIS
17.3 (d)(Voltage, Current, Power, Frequency, Speed, Efficiency, Power factor, Slip)	-	450	5% discount to BIS
17.3 (a)(Voltage, Current, Power, Frequency, Speed)	-	450	5% discount to BIS
14(Terminal marking)	-	450	5% discount to BIS
12.1.2(Momentary overload for motors)	-	450	5% discount to BIS
16(Observation)	-	450	5% discount to BIS
14(Observation)	-	450	5% discount to BIS
9.5(Observation)	-	450	5% discount to BIS
17.3 (a)(Voltage, Current, Power, Frequency, Speed)	-	450	5% discount to BIS
17.3 (d)(Voltage, Current, Power, Frequency, Speed, Efficiency, Power factor, Slip)	-	450	5% discount to BIS
17.3 (c)(Current, Torque)	-	450	5% discount to BIS
17.3 (f)(Torque)	-	450	5% discount to BIS
17.3 (e)(Temperature)	-	450	5% discount to BIS
17.3 (b)(Temperature)	-	450	5% discount to BIS
17.3 (h)(Voltage)	-	450	5% discount to BIS
17.3 (g)(Insulation Resistance)	-	450	5% discount to BIS
17.3 (m)(Vibration)	-	450	5% discount to BIS
17.3 (j)(Observation)	-	450	5% discount to BIS
17.3 (k)(Current)	-	450	5% discount to BIS
11(Observation)	-	450	5% discount to BIS
17.4 & 9.4.6.1(Observation)	-	450	5% discount to BIS
7.2(Dimensions)	-	450	5% discount to BIS
9(Observation)	-	450	5% discount to BIS
16(Observation)	-	450	5% discount to BIS
14(Observation)	-	450	5% discount to BIS
9.5(Observation)	-	450	5% discount to BIS
17.3 (a)(Voltage, Current, Power, Frequency, Speed)	-	450	5% discount to BIS
17.3 (d)(Voltage, Current, Power, Frequency, Speed, Efficiency, Power factor, Slip)	-	450	5% discount to BIS
17.3 (c)(Current, Torque)	-	450	5% discount to BIS
17.3 (f)(Torque)	-	450	5% discount to BIS
17.3 (e)(Temperature)	-	450	5% discount to BIS
17.3 (b)(Temperature)	-	450	5% discount to BIS
17.3 (h)(Voltage)	-	450	5% discount to BIS
17.3 (g)(Insulation Resistance)	-	450	5% discount to BIS
17.3 (m)(Vibration)	-	450	5% discount to BIS
17.3 (j)(Observation)	-	450	5% discount to BIS
17.3 (k)(Current)	-	450	5% discount to BIS
11(Observation)	-	450	5% discount to BIS
17.4 & 9.4.6.1(Observation)	-	450	5% discount to BIS
7.2(Dimensions)	-	450	5% discount to BIS
9(Observation)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
10(Type of enclosures)	-	450	5% discount to BIS
11(Methods of cooling)	-	450	5% discount to BIS
9.1(General construction (as per Cl. 9 & F-3))	-	450	5% discount to BIS
9(General construction (as per Cl. 9 & F-3))	-	450	5% discount to BIS
9.4.11(General construction (as per Cl. 9 & F-3))	-	450	5% discount to BIS
9(General construction (as per Cl. 9 & F-3))	-	450	5% discount to BIS
9.4.11(General construction (as per Cl. 9 & F-3))	-	450	5% discount to BIS
9.4.13(General construction (as per Cl. 9 & F-3))	-	450	5% discount to BIS
4.1(Rated Voltage)	-	450	5% discount to BIS
4.2(Rated Frequency)	-	450	5% discount to BIS
4.3(Rated Output)	-	450	5% discount to BIS
4.4(Rated Speed)	-	450	5% discount to BIS
7(Dimensions (Cl.App.F-4))	-	450	5% discount to BIS
9.5(Earthing)	-	450	5% discount to BIS
9.5(Earthing)	-	450	5% discount to BIS
9.5(Earthing)	-	450	5% discount to BIS
17.3 (a)(No load test at rated voltage and frequency )	-	450	5% discount to BIS
17.3 (a)(No load test at rated voltage and frequency)	-	450	5% discount to BIS
17.3 (a)(No load test at rated voltage and frequency)	-	450	5% discount to BIS
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	450	5% discount to BIS
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	450	5% discount to BIS
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	450	5% discount to BIS
12.1.1(Test for Breakaway starting current at rated voltage and frequency (Cl.12.1.1 & Cl. 12.5))	-	450	5% discount to BIS
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	450	5% discount to BIS
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	450	5% discount to BIS
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	450	5% discount to BIS
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	450	5% discount to BIS
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	450	5% discount to BIS
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	450	5% discount to BIS
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	450	5% discount to BIS
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	450	5% discount to BIS
12.7(Insulation resistance test)	-	450	5% discount to BIS
13.1(High voltage test)	-	450	5% discount to BIS
13.2(Moisture proofness)	-	450	5% discount to BIS
13.2(Moisture proofness)	-	450	5% discount to BIS
13.3(Leakage current test)	-	450	5% discount to BIS
12.6(Vibration Severity)	-	450	5% discount to BIS
15.1(ADDITIONAL TESTS (For ECO - MARK))	-	450	5% discount to BIS
15.1.5(Noise Level)	-	450	5% discount to BIS
15.2(Specific Requirements)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
16.1(Marking and Diagram of connenctions)	-	450	5% discount to BIS
10(Type of enclosures)	-	450	5% discount to BIS
11(Methods of cooling)	-	450	5% discount to BIS
9.1(General construction (as per Cl. 9 & F-3))	-	450	5% discount to BIS
9(General construction (as per Cl. 9 & F-3))	-	450	5% discount to BIS
9.4.11(General construction (as per Cl. 9 & F-3))	-	450	5% discount to BIS
9(General construction (as per Cl. 9 & F-3))	-	450	5% discount to BIS
9.4.11(General construction (as per Cl. 9 & F-3))	-	450	5% discount to BIS
9.4.13(General construction (as per Cl. 9 & F-3))	-	450	5% discount to BIS
4.1(Rated Voltage)	-	450	5% discount to BIS
4.2(Rated Frequency)	-	450	5% discount to BIS
4.3(Rated Output)	-	450	5% discount to BIS
4.4(Rated Speed)	-	450	5% discount to BIS
9.5(Earthing)	-	450	5% discount to BIS
9.5(Earthing)	-	450	5% discount to BIS
9.5(Earthing)	-	450	5% discount to BIS
17.3 (a)(No load test at rated voltage and frequency )	-	450	5% discount to BIS
17.3 (a)(No load test at rated voltage and frequency)	-	450	5% discount to BIS
17.3 (a)(No load test at rated voltage and frequency)	-	450	5% discount to BIS
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	450	5% discount to BIS
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	450	5% discount to BIS
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	450	5% discount to BIS
12.1.1(Test for Breakaway starting current at rated voltage and frequency (Cl.12.1.1 & Cl. 12.5))	-	450	5% discount to BIS
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	450	5% discount to BIS
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	450	5% discount to BIS
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	450	5% discount to BIS
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	450	5% discount to BIS
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	450	5% discount to BIS
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	450	5% discount to BIS
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	450	5% discount to BIS
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	450	5% discount to BIS
12.7(Insulation resistance test)	-	450	5% discount to BIS
13.1(High voltage test)	-	450	5% discount to BIS
13.2(Moisture proofness)	-	450	5% discount to BIS
13.2(Moisture proofness)	-	450	5% discount to BIS
13.3(Leakage current test)	-	450	5% discount to BIS
12.6(Vibration Severity)	-	450	5% discount to BIS
15.1(ADDITIONAL TESTS (For ECO - MARK))	-	450	5% discount to BIS
15.1.5(Noise Level)	-	450	5% discount to BIS
15.2(Specific Requirements)	-	450	5% discount to BIS
14(Terminal marking)	-	450	5% discount to BIS
12.1.2(Momentary overload for motors)	-	450	5% discount to BIS
16(Observation)	-	450	5% discount to BIS
14(Observation)	-	450	5% discount to BIS
9.5(Observation)	-	450	5% discount to BIS
17.3 (a)(Voltage, Current, Power, Frequency, Speed)	-	450	5% discount to BIS
17.3 (d)(Voltage, Current, Power, Frequency, Speed, Efficiency, Power factor, Slip)	-	450	5% discount to BIS
17.3 (c)(Current, Torque)	-	450	5% discount to BIS
17.3 (f)(Torque)	-	450	5% discount to BIS
17.3 (e)(Temperature)	-	450	5% discount to BIS
17.3 (b)(Temperature)	-	450	5% discount to BIS
17.3 (h)(Voltage)	-	450	5% discount to BIS
17.3 (g)(Insulation Resistance)	-	450	5% discount to BIS
17.3 (m)(Vibration)	-	450	5% discount to BIS
17.3 (j)(Observation)	-	450	5% discount to BIS
17.3 (k)(Current)	-	450	5% discount to BIS
11(Observation)	-	450	5% discount to BIS
17.4 & 9.4.6.1(Observation)	-	450	5% discount to BIS
7.2(Dimensions)	-	450	5% discount to BIS
9(Observation)	-	450	5% discount to BIS
16(Observation)	-	450	5% discount to BIS
14(Observation)	-	450	5% discount to BIS
9.5(Observation)	-	450	5% discount to BIS
17.3 (a)(Voltage, Current, Power, Frequency, Speed)	-	450	5% discount to BIS
17.3 (d)(Voltage, Current, Power, Frequency, Speed, Efficiency, Power factor, Slip)	-	450	5% discount to BIS
17.3 (c)(Current, Torque)	-	450	5% discount to BIS
17.3 (f)(Torque)	-	450	5% discount to BIS
17.3 (e)(Temperature)	-	450	5% discount to BIS
17.3 (b)(Temperature)	-	450	5% discount to BIS
17.3 (h)(Voltage)	-	450	5% discount to BIS
17.3 (g)(Insulation Resistance)	-	450	5% discount to BIS
17.3 (m)(Vibration)	-	450	5% discount to BIS
17.3 (j)(Observation)	-	450	5% discount to BIS
17.3 (k)(Current)	-	450	5% discount to BIS
11(Observation)	-	450	5% discount to BIS
17.4 & 9.4.6.1(Observation)	-	450	5% discount to BIS
7.2(Dimensions)	-	450	5% discount to BIS
9(Observation)	-	450	5% discount to BIS

04 Jul, 2027

-
Included.w.e.f.24.12.2024

8339

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY - CIPET, HALDIA

5116334

IS 17216 (2019)

Polyethylene Mulch Films for Agriculture and Horticulture • Specification

All

236998.75 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(Density)	-	500	Discount of 25 % is applicable on total test charges only for BIS.
5.1.2(Melt Flow Index)	-	1099.99	Discount of 25 % is applicable on total test charges only for BIS.
5.1.4(Carbon black, Density)	-	0	-
5.2.1(Visual Appearance)	-	500	Discount of 25 % is applicable on total test charges only for BIS.
5.2.2(Film Form)	-	500	Discount of 25 % is applicable on total test charges only for BIS.
5.2.4(Odour)	-	499.99	Discount of 25 % is applicable on total test charges only for BIS.
5.3.1.1(Tolerance on thickness)	-	0	-
5.3.1.2(Tolerance on width)	-	500.01	Discount of 25 % is applicable on total test charges only for BIS.
5.3.2(Impact Strength)	-	1350	(Test charges 850 + specimen charges 500) Discount of 25 % is applicable on total test charges only for BIS.
5.3.2, Table 1(Nominal Film Thickness)	-	499.99	Discount of 25 % is applicable on total test charges only for BIS.
5.3.2, Table 1(Impact Failure Mass)	-	0	-
5.3.3(Tensile Strength at Break)	-	1600	(Test charges 1100 + specimen charges 500) Discount of 25 % is applicable on total test charges only for BIS.
5.3.4(Elongation at Break)	-	1099.99	Discount of 25 % is applicable on total test charges only for BIS.
5.3.5(Coefficient of Friction)	-	849.99	Discount of 25 % is applicable on total test charges only for BIS.
5.3.6(Elmendorf Tear Strength)	-	2000	(Test charges 1500 + specimen charges 500) Discount of 25 % is applicable on total test charges only for BIS.
5.3.7(Opacity)	-	699.99	Discount of 25 % is applicable on total test charges only for BIS.
5.4, Table 2(Carbon black, percent)	-	925	Discount of 25 % is applicable on total test charges only for BIS.
5.4, Table 2(Ash content, percent)	-	1199.99	Discount of 25 % is applicable on total test charges only for BIS.
5.4, Table 2(Carbon black dispersion)	-	700	Discount of 25 % is applicable on total test charges only for BIS.
Cl.5.4(Carbon Black percent (w/w)- Annex A)	-	0	-
Cl.5.4(Ash content percent (w/w)- Annex A)	-	0	-
5.5(Service Life)	-	224780	(Test charges 2200 + specimen charges 222580 ) Discount of 25 % is applicable on total test charges only for BIS.
5.5, Annex D(U. V. Exposure (Service Life of Indian Solar Radiant Exposure 160 Kly))	-	0	-
Cl.5.4(Carbon Black Dispersion- Cl.16 of IS 2530)	-	0	-
Cl.5.4(Carbon Black Dispersion- Cl.16 of IS 2530)	-	0	-
506(Solar Reflectance for Reflective Mulch Film)	-	2000	Discount of 25 % is applicable on total test charges only for BIS.

14 Dec, 2027

-
Included w.e.f.10.12.2024 exclusion CL 5.1.4(Carbon black) and CL 5.1.5(UV Stabilizer)

8340

SIIR, Delhi Shriram Institute For Industrial Research

8102006

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

40600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Visual Appearance)	-	1000	30% Discount
Cl-7.4(Mean Outside Diameter (For upto 50 mm take 8 reading, above 50mm take 6 reading & average will be reported))	-	1500	30% Discount
7.4.1.2(Ovality)	-	0	-
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	15000	30% Discount
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	7500	30% Discount
8.2(Longitudinal Reversion Test)	-	2500	30% Discount
Cl. 8.3(Carbon Black Content)	-	1500	30% Discount
Cl. 8.3(Carbon Black Dispersion)	-	1500	30% Discount
8.4( Melt Flow Rate)	-	2500	30% Discount
8.5 (Oxidation Induction Time)	-	4000	30% Discount
Clause 8.6(Overall migration (stimulate))	-	2500	30% Discount
Clause 8.6(Overall migration (surface of material))	-	0	-
8.7(Density)	-	1000	30% Discount
8.8(Tensile Strength for Butt-fusion)	-	2000	30% Discount
8.9 table-6(Elongation at Break)	-	0	-
8.10(Slow Crack Growth Rate)	-	5000	30% Discount
5, 5.1 table-1(MATERIALS)	-	1000	30% Discount
5.2(Polyethylene Resin)	-	2500	30% Discount
5.3 (a)(Carbon Black Master Batch)	-	0	-
5.3(c)(Carbon Black Master Batch)	-	0	-
5.3(d)(Carbon Black Master Batch)	-	0	-
5.3(e)(Carbon Black Master Batch)	-	0	-
6, 6.1(PIPE DESCRIPTION)	-	1000	30% Discount
6, 6.1.1(PIPE DESCRIPTION)	-	0	-
6, 6.1.2(PIPE DESCRIPTION)	-	0	-
6.1.3 (PIPE DESCRIPTION)	-	0	-
6.1.4(PIPE DESCRIPTION)	-	0	-
6.2(Colour)	-	1000	30% Discount
6.2.1(6.1.1 Identification Stripes)	-	1000	30% Discount
8.6(Overall migration)	-	0	-
8.3(Carbon black)	-	0	-
7()	-	0	-
5.2(Density)	-	0	-
5.2(MFI @ 1900C/5.0 Kg)	-	2500	30% Discount
5.2(Volatile matter Content)	-	1500	30% Discount
5.3(Toluene Extract)	-	0	-
Cl 8.3(Carbon Black Content)	-	0	-
Cl 8.3(Carbon Black Dispersion)	-	0	-
Table-2 (iii, iv)(Thermal Stability (Oxidation Induction Time), Volatile Matter)	-	0	-
5.2,T2(Melt Flow rate(Temperature - 190oC,Mass 5kg)-IS 2530-1963)	-	0	-
8.7(Density-IS 7328:2020)	-	0	-
8.7(Corrected Density- IS 7328:2020)	-	0	-
8.9,T6("Tensile - IS 4984-2016 (Annexure-H)")	-	0	-
8.9,T6("Elongation -IS 4984-2016 (Annexure-H)")	-	0	-
Clause 8.3(Carbon Black content)	-	0	-
Clause 8.3(Carbon Black Dispersion)	-	0	-
Clause 7.1(Visual Apperance)	-	0	-
7.1(Visual Appearance)	-	0	-
Cl. 8.3(Carbon Black Content)	-	0	-
Cl. 8.3(Carbon Black Dispersion)	-	0	-
Clause 8.6(Overall migration (stimulate))	-	0	-
Clause 8.6(Overall migration (surface of material))	-	0	-
8.10(Slow Crack Growth Rate)	-	0	-
7()	-	0	-
5.2(Density)	-	0	-
5.2(MFI @ 1900C/5.0 Kg)	-	0	-
5.2(Volatile matter Content)	-	0	-
5.3(Toluene Extract)	-	0	-
Cl 8.3(Carbon Black Content)	-	0	-
Cl 8.3(Carbon Black Dispersion)	-	0	-
Table-2 (iii, iv)(Thermal Stability (Oxidation Induction Time), Volatile Matter)	-	0	-
5.2,T2(Melt Flow rate(Temperature - 190oC,Mass 5kg)-IS 2530-1963)	-	0	-
8.7(Density-IS 7328:2020)	-	0	-
8.7(Corrected Density- IS 7328:2020)	-	0	-
8.9,T6("Tensile - IS 4984-2016 (Annexure-H)")	-	0	-
8.9,T6("Elongation -IS 4984-2016 (Annexure-H)")	-	0	-
Clause 8.3(Carbon Black content)	-	0	-
Clause 8.3(Carbon Black Dispersion)	-	0	-
Clause 7.1(Visual Apperance)	-	0	-
7.1(Visual Appearance)	-	0	-
Cl. 8.3(Carbon Black Content)	-	0	-
Cl. 8.3(Carbon Black Dispersion)	-	0	-
Clause 8.6(Overall migration (stimulate))	-	0	-
Clause 8.6(Overall migration (surface of material))	-	0	-
8.10(Slow Crack Growth Rate)	-	0	-
7()	-	0	-
5.2(Density)	-	0	-
5.2(MFI @ 1900C/5.0 Kg)	-	0	-
5.2(Volatile matter Content)	-	0	-
5.3(Toluene Extract)	-	0	-
Cl 8.3(Carbon Black Content)	-	0	-
Cl 8.3(Carbon Black Dispersion)	-	0	-
Table-2 (iii, iv)(Thermal Stability (Oxidation Induction Time), Volatile Matter)	-	0	-
5.2,T2(Melt Flow rate(Temperature - 190oC,Mass 5kg)-IS 2530-1963)	-	0	-
8.7(Density-IS 7328:2020)	-	0	-
8.7(Corrected Density- IS 7328:2020)	-	0	-
8.9,T6("Tensile - IS 4984-2016 (Annexure-H)")	-	0	-
8.9,T6("Elongation -IS 4984-2016 (Annexure-H)")	-	0	-
Clause 8.3(Carbon Black content)	-	0	-
Clause 8.3(Carbon Black Dispersion)	-	0	-
Clause 7.1(Visual Apperance)	-	0	-
7.2(Length)	-	0	-
7.3(Coiling)	-	0	-
Clause 7.3(Coiling)	-	0	-

31 Dec, 2026

-
Included w.e.f 23.12.2024 Exclusion : Cl 5.3(b) (Carbon Black Master Batch), Cl 5.4 (Anti oxydent)

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number

No Record Found

No Record Found