BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15625 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

8371

International Testing Centre, MSME Technology Development Centre, Meerut

8177804

IS 15298 : Part 3 (2024)

Personal Protective Equipment Part 3 Protective Footwear (ISO 20346 : 2021, MOD) (Third Revision)

45500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.2(Design)	-	300	-
Cl 5.2.2(" Height of upper ")	-	300	-
Cl 5.2.3(Heel area)	-	300	-
Cl 5.3.1.1(Construction of whole footwear)	-	300	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	500	-
Cl 5.3.2.1(Toe protection - general)	-	800	-
Cl 5.3.2.2(Internal length)	-	300	-
Cl 5.3.2.3(Width of toecap flange)	-	300	-
Cl 5.3.2.4.1(Corrosion resistance of Class I footwear and hybrid mounted footwear)	-	500	-
Cl 5.3.2.4.2(Corrosion resistance of Class II and hybrid moulded footwear)	-	500	-
Cl 5.3.2.5(Behaviour of toecaps (thermal and chemical) of Corrosion resistance)	-	300	-
Cl 5.3.2.6(Impact resistance)	-	800	-
Cl 5.3.2.7(Compression resistance)	-	500	-
Cl 5.3.3(Leak proofness)	-	800	-
Cl 5.3.4("Specific ergonomic features ")	-	800	-
Cl 5.3.5.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	1500	-
Cl 5.3.6, Table no 1 of IS 17011 (i)(Allergenic and carcinogenic disperse dyes)	-	3000	-
Cl 5.3.6, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3500	-
Cl 5.3.6, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3500	-
Cl 5.3.6, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	2000	-
Cl 5.3.6, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	2000	-
Cl 5.3.6, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	2000	-
Cl 5.3.6, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	2000	-
Cl 5.3.6, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	3500	-
Cl 5.3.6, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	3000	-
Cl 5.3.6, Table no 1 of IS 17011 (x)(pH)	-	500	-
Cl 5.3.6, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	4500	-
Cl 5.3.6, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	2000	-
Cl 5.3.7(Seam strength)	-	500	-
Cl 5.3.8(Lead Content ( National Annex A))	-	2000	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	500	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	500	-
Cl 5.4.2(Thickness)	-	300	-
Cl 5.4.3(Tear strength)	-	500	-
Cl 5.4.4, Table 11(Tensile properties- Tensile strength)	-	500	-
Cl 5.4.4, Table 11(Tensile properties- Breaking Force)	-	500	-
Cl 5.4.4, Table 11(Tensile properties-Modulus at 100 % elongation)	-	500	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	500	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	500	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	800	-
Cl 5.4.7(Resistance to hydrolysis)	-	1500	-
Cl 5.5.2(Lining- Tear strength)	-	500	-
Cl 5.5.3(Lining- Abrasion resistance)	-	800	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	800	-
Cl 5.6.2(Tear strength of tongue)	-	500	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	300	-
Cl 5.7.2(Water permeability of insock)	-	800	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	800	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	800	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	800	-
Cl 5.8.2.1(Thickness of Outsole)	-	300	-
Cl 5.8.2.2(Cleated area)	-	300	-
Cl 5.8.2.3(Cleat height)	-	300	-
Cl 5.8.3(Outsole- Tear strength)	-	500	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	800	-
Cl 5.8.5(Outsole-Flexing resistance)	-	800	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	1500	-
Cl 5.8.7(Interlayer bond strength)	-	500	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	800	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	800	-
Cl 6.2.1.1.4(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	800	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	800	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	300	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	500	-
Cl 6.2.1.4.2.1(Corrosion resistance of perforation resistant metallic insert for Class I footwear and hybrid mounted footwear)	-	500	-
Cl 6.2.1.4.2.2(Corrosion resistance of perforation resistant metallic insert for Class II footwear and hybrid moulded footwear)	-	500	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	1500	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	800	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	800	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	1000	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	1500	-
Cl 6.2.4(Energy absorption of seat region)	-	500	-
Cl 6.2.5(Water resistance)	-	800	-
Cl 6.2.6.1(Metatarsal protection - Construction)	-	500	-
Cl 6.2.6.2("Metatarsal protection-Impact resistance of metatarsal protective device ")	-	500	-
Cl 6.2.7(Ankle protection)	-	500	-
Cl 6.2.8.2(Cut resistance footwear- design)	-	1000	-
Cl 6.2.8.2(Dimensions and construction of protective area of Cut resistance footwear)	-	300	-
Cl 6.2.8.3(Resistance to cutting)	-	500	-
Cl 6.2.9(Scuff cap)	-	500	-
Cl 6.2.10("Slip resistance on ceramic tile floor with glycerine ")	-	1500	-
Cl 6.3(Upper — Water penetration and absorption)	-	800	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	800	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	500	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	300	-
Cl 6.4.3.2(Design of Ladder grip)	-	300	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	300	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	300	-
Cl 7("Marking ")	-	300	-
Cl 7("Marking ")	-	300	-

15 Apr, 2027

-
Included.w.e.f.06.12.2024

8372

BIS, Central Laboratory (CL)

None

IS 367 (1993)

Electric kettles and jugs for household and similar use - Specification (Fourth Revision)

3525 .5 KW View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-9 (Cl-8 of IS 302-2-15) (PROTECTION AGAINST ACCESS TO LIVE PARTS)	-
Cl-9 (Cl-10 of IS 302-2-15) (POWER INPUT AND CURRENT)	-
Cl-9 (Cl-11 of IS 302-2-15) (HEATING)	-
Cl-9 (Cl-13 of IS 302-2-15) (LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-
Cl-9 (Cl-15 of IS 302-2-15) (MOISTURE RESISTANCE)	-
Cl-9 (Cl-16 of IS 302-2-15) (LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-
Cl-9 (Cl-19 of IS 302-2-15) (ABNORMAL OPERATION)	-
Cl-9 (Cl-20 of IS 302-2-15) (STABILITY AND MECHANICAL HAZARDS)	-
Cl-9 (Cl-21 of IS 302-2-15) (MECHANICAL STRENGTH)	-
Cl-9 (Cl-22 of IS 302-2-15) (CONSTRUCTION)	-
Cl-9 (Cl-23 of IS 302-2-15) (INTERNAL WIRING)	-
Cl-9 (Cl-24 of IS 302-2-15) (COMPONENTS)	-
Cl-9 (Cl-25 of IS 302-2-15) (SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-
Cl-9 (Cl-26 of IS 302-2-15) (TERMINALS FOR EXTERNAL CONDUCTORS)	-
Cl-9 (Cl-27 of IS 302-2-15) (PROVISION FOR EARTHING)	-
Cl-9 (Cl-28 of IS 302-2-15) (SCREWS AND CONNECTIONS)	-
Cl-9 (Cl-29 of IS 302-2-15) (CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-
Cl-9 (Cl-30 of IS 302-2-15) (RESISTANCE TO HEAT AND FIRE)	-
Cl-9 (Cl-31 of IS 302-2-15) (RESISTANCE TO RUSTING)	-
7 (Classification)	-
11 (Overall Dimensions)	-
12 (Mass)	-
13 (Water Capacity)	-
16 (Minimum quantity of water that can be boiled)	-
18 (Thermal Efficiency)	-
20 (Finish)	-
8 (Marking and Instruction)	-

-
Exclusion Cl. 14, Cl.15, Cl.17, Cl.19 and Cl.20.2

8373

Global Testing Laboratory Private limited, Ghaziabad

8184306

IS 9537 : Part 3 (1983)

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials

3500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Marking)	-	500	-
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	500	-
6.3(Standard Mark on Conduit)	-	500	-
7.1.1(Maximum and minimum outside diameter of socket)	-	500	-
7.1.1 Table-2(Length of Socket end)	-	500	-
7.1.2(Maximum and minimum outside diameter of conduit)	-	500	-
7.2(Minimum inside diameter of conduit)	-	500	-
7.3(Length of conduit)	-	500	-
7.4(Unifomity of The wall Thickness)	-	500	-
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	500	-
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	500	-
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	500	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	500	-
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	500	-
10(Resistance to Heat -Ball presure test)	-	1000	-
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	1000	-
12(Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	1000	-
12(Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	1000	-
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	1000	-
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	1000	-
12(3 Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	1000	-
12(3 Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	1000	-
11.0(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	1000	-
10.0(Resistance to Heat -Ball presure test)	-	1000	-
9.5 Fig.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	500	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	500	-
9.3(Compression Test (after removal of force) as per caluse 9.3.3 of IS: 9537 (Part 1)-1980)	-	1000	-
9.3(Compression Test at Full force applied (On load))	-	1000	-
9.2(Bending Test At Low Temp (-5 ±2°C))	-	1000	-
9.2(Bending Test At Room Temp)	-	500	-
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	500	-
7.4(Unifomity of The wall Thickness)	-	1000	-
7.3(Length of conduit)	-	500	-
7.2 Fig.3(Minimum inside diameter of conduit)	-	500	-
7.1.2 Fig.2(Minimum outside diameter of conduit)	-	500	-
7.1.2 Fig.1(Maximum outside diameter of conduit)	-	500	-
7.1.1 Table-2(Length of Socket end)	-	500	-
7.1.1 Fig.8(Maximum inside diameter of socket)	-	500	-
7.1.1 Fig.7(Maximum outside diameter of socket)	-	500	-
6.3(Standard Mark on Conduit)	-	500	-
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	500	-
6.1 - d(Marking)	-	500	-
6.1 - c(Marking)	-	500	-
6.1 - b(Marking)	-	500	-
6.1 - a(Marking)	-	500	-

11 Mar, 2028

-
-

8374

Precision Laboratories LLP, Ahmedabad

7174106

IS 710 (2024)

MARINE PLYWOOD - SPECIFICATION (Third Revision)

15500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Timber)	-	1500	-
Cl-4.2(Adhesive)	-	1500	-
Cl-5.1(Veneers)	-	1500	-
Cl-5.2.1(Glueing)	-	1500	-
Cl -5.2.2(Thickness of Veneers)	-	1500	-
Cl - 5.2.3.1(Joint in Veneers)	-	1500	-
Cl - 5.2.3.2(Edge joints)	-	1500	-
Cl - 5.2.3.3(End joints)	-	1500	-
Cl - 5.2.3.4(Scarf joints)	-	1500	-
Cl - 5.2.4(Grain Direction)	-	1500	-
Cl-5.3(Treatment)	-	1500	-
Cl-5.4(Moisture Content)	-	1500	-
Cl-6.1(Dimensions (length))	-	1500	-
Cl-6.2(Thickness)	-	1500	-
Cl-6.3(Squareness)	-	1500	-
Cl-7.1, 7.2, 7.3, 7.4, 7.5 & 7.6(Workmanship and finish)	-	1500	-
Cl-9.3(Moisture Content)	-	1500	-
Cl-9.4.2(Glue Adhesion in Dry State- Adhesion of Plies)	-	1500	-
Cl-9.4.1(Glue Adhesion in Dry State- Glue Shear Strength -Average)	-	1500	-
Cl-9.5.1.1(Glue Adhesion in Water Resistance - Glue Shear Strength -Average)	-	1500	-
Cl-9.5.1.2(Water Resistance Test-Adhesion of plies)	-	1500	-
Cl-9.5.2(Water Resistance Test)	-	1500	-
Cl-9.6(Tensile Strength-Along the grain)	-	1500	-
Cl-9.7(Mycological Test -Adhesion)	-	1500	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1500	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1500	-
Cl-9.9, Table-3 (i) a((Modulus of Elasticity: Across the Face Grain: Average) Wet Bending)	-	1500	-
Cl-9.9, Table-3 (i) b((Modulus of Elasticity: Across the Face Grain: Minimum Individual) Wet Bending)	-	1500	-
Cl-9.10(Retention of Preservative)	-	1500	-
Cl-9.11(Formaldehyde Content Test)	-	1500	-
Cl-9.12(Steady-State Formaldehyde Emission Test)	-	1500	-
Cl-9.4.2(Adhesion of Plies)	-	1500	-
5.1.1(Defects in veneers)	-	1500	-
Cl-4.1(Timber)	-	1500	-
Cl-4.2(Adhesive)	-	1500	-
Cl-5.1(Veneers)	-	1500	-
Cl-5.2.1(Glueing)	-	1500	-
Cl -5.2.2(Thickness of Veneers)	-	1500	-
Cl - 5.2.3.1(Joint in Veneers)	-	1500	-
Cl - 5.2.3.2(Edge joints)	-	1500	-
Cl - 5.2.3.3(End joints)	-	1500	-
Cl - 5.2.3.4(Scarf joints)	-	1500	-
Cl - 5.2.4(Grain Direction)	-	1500	-
Cl-5.3(Treatment)	-	1500	-
Cl-5.4(Moisture Content)	-	1500	-
Cl-6.1(Dimensions (length))	-	1500	-
Cl-6.2(Thickness)	-	1500	-
Cl-6.3(Squareness)	-	1500	-
Cl-7.1, 7.2, 7.3, 7.4, 7.5 & 7.6(Workmanship and finish)	-	1500	-
Cl-9.3(Moisture Content)	-	1500	-
Cl-9.4.2(Glue Adhesion in Dry State- Adhesion of Plies)	-	1500	-
Cl-9.4.1(Glue Adhesion in Dry State- Glue Shear Strength -Average)	-	1500	-
Cl-9.5.1.1(Glue Adhesion in Water Resistance - Glue Shear Strength -Average)	-	1500	-
Cl-9.5.1.2(Water Resistance Test-Adhesion of plies)	-	1500	-
Cl-9.5.2(Water Resistance Test)	-	1500	-
Cl-9.6(Tensile Strength-Along the grain)	-	1500	-
Cl-9.7(Mycological Test -Adhesion)	-	1500	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1500	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1500	-
Cl-9.9, Table-3 (i) a((Modulus of Elasticity: Across the Face Grain: Average) Wet Bending)	-	1500	-
Cl-9.9, Table-3 (i) b((Modulus of Elasticity: Across the Face Grain: Minimum Individual) Wet Bending)	-	1500	-
Cl-9.10(Retention of Preservative)	-	1500	-
Cl-9.11(Formaldehyde Content Test)	-	1500	-
Cl-9.4.2(Adhesion of Plies)	-	1500	-
5.1.1(Defects in veneers)	-	1500	-
Cl-9.12(Steady-State Formaldehyde Emission Test)	-	1500	-
Cl-4.1(Timber)	-	1500	-
Cl-4.2(Adhesive)	-	1500	-
Cl-5.1(Veneers)	-	1500	-
Cl-5.2.1(Glueing)	-	1500	-
Cl -5.2.2(Thickness of Veneers)	-	1500	-
Cl - 5.2.3.1(Joint in Veneers)	-	1500	-
Cl - 5.2.3.2(Edge joints)	-	1500	-
Cl - 5.2.3.3(End joints)	-	1500	-
Cl - 5.2.3.4(Scarf joints)	-	1500	-
Cl - 5.2.4(Grain Direction)	-	1500	-
Cl-5.3(Treatment)	-	1500	-
Cl-5.4(Moisture Content)	-	1500	-
Cl-6.1(Dimensions (length))	-	1500	-
Cl-6.2(Thickness)	-	1500	-
Cl-6.3(Squareness)	-	1500	-
Cl-7.1, 7.2, 7.3, 7.4, 7.5 & 7.6(Workmanship and finish)	-	1500	-
Cl-9.3(Moisture Content)	-	1500	-
Cl-9.4.2(Glue Adhesion in Dry State- Adhesion of Plies)	-	1500	-
Cl-9.4.1(Glue Adhesion in Dry State- Glue Shear Strength -Average)	-	1500	-
Cl-9.5.1.1(Glue Adhesion in Water Resistance - Glue Shear Strength -Average)	-	1500	-
Cl-9.5.1.2(Water Resistance Test-Adhesion of plies)	-	1500	-
Cl-9.5.2(Water Resistance Test)	-	1500	-
Cl-9.6(Tensile Strength-Along the grain)	-	1500	-
Cl-9.7(Mycological Test -Adhesion)	-	1500	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1500	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1500	-
Cl-9.9, Table-3 (i) a((Modulus of Elasticity: Across the Face Grain: Average) Wet Bending)	-	1500	-
Cl-9.9, Table-3 (i) b((Modulus of Elasticity: Across the Face Grain: Minimum Individual) Wet Bending)	-	1500	-
Cl-9.10(Retention of Preservative)	-	1500	-
Cl-9.11(Formaldehyde Content Test)	-	1500	-
Cl-9.4.2(Adhesion of Plies)	-	1500	-
5.1.1(Defects in veneers)	-	1500	-
Cl-9.12(Steady-State Formaldehyde Emission Test)	-	1500	-
Cl-4.1(Timber)	-	1500	-
Cl-4.2(Adhesive)	-	1500	-
Cl-5.1(Veneers)	-	1500	-
Cl-5.2.1(Glueing)	-	1500	-
Cl -5.2.2(Thickness of Veneers)	-	1500	-
Cl - 5.2.3.1(Joint in Veneers)	-	1500	-
Cl - 5.2.3.2(Edge joints)	-	1500	-
Cl - 5.2.3.3(End joints)	-	1500	-
Cl - 5.2.3.4(Scarf joints)	-	1500	-
Cl - 5.2.4(Grain Direction)	-	1500	-
Cl-5.3(Treatment)	-	1500	-
Cl-5.4(Moisture Content)	-	1500	-
Cl-6.1(Dimensions (length))	-	1500	-
Cl-6.2(Thickness)	-	1500	-
Cl-6.3(Squareness)	-	1500	-
Cl-7.1, 7.2, 7.3, 7.4, 7.5 & 7.6(Workmanship and finish)	-	1500	-
Cl-9.3(Moisture Content)	-	1500	-
Cl-9.4.2(Glue Adhesion in Dry State- Adhesion of Plies)	-	1500	-
Cl-9.4.1(Glue Adhesion in Dry State- Glue Shear Strength -Average)	-	1500	-
Cl-9.5.1.1(Glue Adhesion in Water Resistance - Glue Shear Strength -Average)	-	1500	-
Cl-9.5.1.2(Water Resistance Test-Adhesion of plies)	-	1500	-
Cl-9.5.2(Water Resistance Test)	-	1500	-
Cl-9.6(Tensile Strength-Along the grain)	-	1500	-
Cl-9.7(Mycological Test -Adhesion)	-	1500	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1500	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1500	-
Cl-9.9, Table-3 (i) a((Modulus of Elasticity: Across the Face Grain: Average) Wet Bending)	-	1500	-
Cl-9.9, Table-3 (i) b((Modulus of Elasticity: Across the Face Grain: Minimum Individual) Wet Bending)	-	1500	-
Cl-9.10(Retention of Preservative)	-	1500	-
Cl-9.11(Formaldehyde Content Test)	-	1500	-
Cl-9.4.2(Adhesion of Plies)	-	1500	-
5.1.1(Defects in veneers)	-	1500	-
Cl-9.12(Steady-State Formaldehyde Emission Test)	-	1500	-

31 Oct, 2029

-
Included w.e.f 04.03.2025 Exclusion: Cl-9.12 (Steady-State Formaldehyde Emission Test)

8375

AANKAN CALIBRATION AND TESTING CENTRE LLP, DANTLI

7184406

IS 2202 : Part 1 (2023)

WOODEN FLUSH DOOR SHUTTERS SOLID CORE TYPE SPECIFICATION PART 1 PLYWOOD FACE PANELS Seventh Revision

GRADE BWP/MR,TYPE BN/BD/PD/PN,Size 2440 x1220x 50mm Max

25400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.1(Workmanship & Finish)	-	200	-
9.2(Workmanship & Finish)	-	200	-
9.3(Workmanship & Finish)	-	200	-
11.1(Dimensions - Height)	-	200	-
11.1(Dimensions - Width)	-	200	-
11.1(Dimensions - Thickness)	-	200	-
11.1(Dimensions - Variation in thickness)	-	100	-
11.1(Dimensions - Squareness)	-	200	-
11.12(End immersion test)	-	300	-
11.13(Knife Test)	-	1000	-
11.14(Glue Adhesion Test)	-	1000	-
4(GRADE)	-	0	-
4(TYPE)	-	0	-
5(SIZES)	-	0	-
7.1.1(CONSTRUCTION-Blockboard Core)	-	0	-
7.1.1(CONSTRUCTION-Blockboard Core)	-	0	-
7.1.2(CONSTRUCTION-Blockboard Core)	-	0	-
7.3.2(CONSTRUCTION-Stiles and Rails)	-	0	-
7.3.2(a)(CONSTRUCTION-Stiles and Rails-Joints)	-	0	-
7.3.2(b)(CONSTRUCTION-Stiles and Rails-Joints)	-	0	-
7.3.2(c)(CONSTRUCTION-Stiles and Rails-Joints)	-	0	-
7.3.3(CONSTRUCTION-Stiles and Rails)	-	0	-
9.1(WORKMANSHIP AND FINISH)	-	0	-
9.2(WORKMANSHIP AND FINISH)	-	0	-
9.3(WORKMANSHIP AND FINISH)	-	0	-
11.1(Dimensions and Squareness Test)	-	0	-
11.1(Dimensions and Squareness Test)	-	0	-
11.1(Dimensions and Squareness Test)	-	0	-
11.1(Dimensions and Squareness Test)	-	0	-
11.1(Dimensions and Squareness Test)	-	0	-
11.2(General Flatness Test)	-	900	-
11.2(General Flatness Test)	-	0	-
11.2(General Flatness Test)	-	0	-
11.3(Local Planeness Test)	-	1000	-
11.4(Impact Indentation Test)	-	1000	-
11.4(Impact Indentation Test)	-	0	-
11.5(Flexure Test)	-	2000	-
11.5(Flexure Test)	-	0	-
11.6(Edge Loading Test)	-	1500	-
11.6(Edge Loading Test)	-	0	-
11.6(Edge Loading Test)	-	0	-
11.6(Edge Loading Test)	-	0	-
11.7.1(Shock Resistance Test)	-	2000	-
11.7.2(Shock Resistance Test)	-	0	-
11.8(Buckling Test)	-	1500	-
11.8(Buckling Test)	-	0	-
11.8(Buckling Test)	-	0	-
11.9.2(Slamming Test)	-	1500	-
11.9.3(Slamming Test)	-	0	-
11.10(Misuse Test)	-	800	-
11.11(Varying Humidity Test)	-	4000	-
11.11(Varying Humidity Test)	-	0	-
11.12(End Immersion Test)	-	3000	-
11.13(Knife Test)	-	1000	-
11.14(Glue Adhesion Test)	-	1000	-
11.15(Screw Withdrawal Resistance Test)	-	3500	-
11.15(Screw Withdrawal Resistance Test)	-	0	-
Clause 4.2(grades specified)	-	0	-
Clause 5(SIZES)	-	0	-
Clause 6.1.1(species of timber)	-	0	-
Clause 6.1.2(list of species)	-	0	-
Clause 6.1.3(moisture content)	-	0	EXTRA CHARGES FOR CL.6.1.3 RS 1000
Clause 6.2.1(Plywood)	-	0	EXTRA CHARGES FOR CL.6.2.1 IS 303 RS 4000 & IS 710 RS 1200
Clause 6.2.2(Decorative plywood)	-	0	EXTRA CHARGES FOR CL.6.2.2 RS 4000
Clause 6.3(Cross-Bands)	-	0	EXTRA CHARGES FOR CL.6.3 RS 1500
Clause 6.4.1(Commercial Face Veneers)	-	0	EXTRA CHARGES FOR CL.6.4.1 RS 1500
Clause 6.4.2(Decorative Face Veneers)	-	0	EXTRA CHARGES FOR CL.6.4.2 RS 1500
Clause 6.6.1(Adhesives)	-	8000	EXTRA CHARGES FOR CL.6.61 BWP- RS 8000 & MR RS 7000
Clause 6.7(Particle Board)	-	0	EXTRA CHARGES FOR CL.6.7 RS 1200(SWELLING IN THICKNESS DUE TO GENERAL ABSORPTION)
Clause 6.8(Medium density fibre board)	-	0	EXTRA CHARGES FOR CL.6.8 RS 1200(SWELLING IN THICKNESS DUE TO GENERAL ABSORPTION)
Clause 6.9(Alternative Materials)	-	0	EXTRA CHARGES FOR CL6.9 FOR IS 710-12600, IS 303 -4000
Clause 7.1(Blockboard Core)	-	0	EXTRA CHARGES FOR CL.7.1 -1500
Clause 7.2(Particle Board or Medium Density Fibre)	-	0	-
Clause 7.3(Stiles and Rails)	-	200	-
Clause 7.4(Levelling)	-	0	-
Clause 7.5(Face Panel)	-	0	-
Clause 7.6(Lipping)	-	0	-
Clause 7.7(Rebating)	-	0	-
Clause 7.8(Opening for Glazing)	-	0	-
Clause 7.9(Venetian)	-	0	-
Clause 8.1(Locks)	-	0	-
Clause 9(WORKMANSHIP AND FINISH)	-	0	-
Clause 10.1(Classification of Tests)	-	0	-
Clause 11.1(Dimensions and Squareness Test)	-	0	-
Clause 11.2(General Flatness Test)	-	0	-
Clause 11.3(Local Planeness Test)	-	0	-
Clause 11.4(Impact Indentation Test)	-	0	-
Clause 11.5(Flexure Test)	-	0	-
Clause 11.6(Edge Loading Test)	-	0	-
Clause 11.7(Shock Resistance Test)	-	0	-
Clause 11.8(Buckling Resistance Test)	-	0	-
Clause 11.9(Slamming Test)	-	0	-
Clause 11.10(Misuse Test)	-	0	-
Clause 11.11(Varying Humidity Test)	-	0	-
Clause 11.12(End Immersion Test)	-	0	-
Clause 11.13(Knife Test)	-	0	-
Clause 11.14(Glue Adhesion Test)	-	0	-
Clause 11.15(Screw Withdrawal Resistance Test)	-	0	-
Clause 12(SAMPLING AND CRITERIA FOR CONFORMITY)	-	0	-
Clause 13(ADDITIONAL REQUIREMENTS FOR ECO MARK)	-	0	-
Clause 14(Marking)	-	0	-
4(Grade, Type and Construction)	-	0	-
5(Sizes and Thickness)	-	0	-
6.1(Timber)	-	0	-
6.2(Plywood for flush door shutter)	-	0	-
6.3(Cross-Bands )	-	0	-
6.4.1(Commercial Face Veneers)	-	0	-
6.4.2(Decorative face veneers)	-	0	-
6.6(Adhesives)	-	0	-
6.7(Particle Board)	-	0	-
6.8(Medium Density Fibre)	-	0	-
6.9(Alternative Materials)	-	0	-
7(Construction)	-	0	-
8.1(Locks)	-	0	-
8.2(Other Fittings)	-	0	-
9(Workmanship and Finish)	-	0	-
10(Tests)	-	0	-
11.1(Dimensions and Squareness Test)	-	0	-
11.2(General Flatness Test)	-	0	-
11.3(Local Planeness Test)	-	0	-
11.4(Impact Indentation Test)	-	0	-
11.5(Flexure Test)	-	0	-
11.6(Edge Loading Test)	-	0	-
11.7(Shock Resistance Test)	-	0	-
11.9(Slamming Test)	-	0	-
11.1(Misuse Test)	-	0	-
11.11(Varying Humidity Test)	-	0	-
11.12(End Immersion Test)	-	0	-
11.13(Knife Test)	-	0	-
11.14(Glue Adhesion Test)	-	0	-
11.15(Screw Withdrawal Resistance Test)	-	0	-
14(Marking )	-	100	-
Cl-13(ADDITIONAL REQUIREMENTS FOR ECO MARK)	-	0	-
11.8(Buckling Resistance Test)	-	0	-

-
-

8376

CIPET, Hyderabad

6111634

IS 17425 (2020)

Irrigation Equipment - Quick Coupled Polyethylene Pipes and Fittings for Sprinkler Irrigation Systems - Specification

66725 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Dimensions of pipe - i) Outside diameter)	-	750	25 % DISCOUNT FOR BIS
5(Dimensions of pipe - ii) Wall thickness minimum)	-	750	25 % DISCOUNT FOR BIS
6(Visual Appearance)	-	300	25 % DISCOUNT FOR BIS
7.1(Hydraulic Characteristics - Quality test)	-	4800	25 % DISCOUNT FOR BIS
7.1(Hydraulic Characteristics - Acceptance test)	-	1600	25 % DISCOUNT FOR BIS
7.2(Reversion Test)	-	700	25 % DISCOUNT FOR BIS
7.3(Tensile Test- i) Tensile Strength)	-	1100	25 % DISCOUNT FOR BIS
7.3(Tensile Test - ii)Elongation at Break)	-	1100	25 % DISCOUNT FOR BIS
7.4(Fusion Compatibility Test- a) Quality test)	-	4800	25 % DISCOUNT FOR BIS
7.4(Fusion Compatibility Test- b) Acceptance test)	-	1600	25 % DISCOUNT FOR BIS
7.5(Density)	-	500	25 % DISCOUNT FOR BIS
7.6(Melt Flow Rate)	-	1100	25 % DISCOUNT FOR BIS
4.2(Carbon black- a)carbon content)	-	925	25 % DISCOUNT FOR BIS
4.2(Carbon black- b) Dispersion of carbon black)	-	700	25 % DISCOUNT FOR BIS
5.1.2(Ovality)	-	750	25 % DISCOUNT FOR BIS
4.3(Anti-oxidant)	-	700	25 % DISCOUNT FOR BIS
Cl. 4.2 , IS 2530-1963, Cl. 10(Cabon Black Content)	-	925	25 % DISCOUNT FOR BIS
4.1.2(The MFR of the material shall be between 0.2 to 1.1 (both inclusive) when tested at 190 T at a nominal load of 50 N by the method prescribed in 7 of IS 2530. The MFR of the material shall also be within 20% of the value declared by the manufacturer.’)	-	1100	25 % DISCOUNT FOR BIS
4.1.1(density shall be between 940.4 kg/m’ and 958.4 kg/m3 (both inclusive) when determined at 27°C according to procedure prescribed in Annex A of IS 7328. The value of the density shall also not differ from the nominal value by more than 3 kg/m2 as per 5.2.1.1 of IS 7328.)	-	500	25 % DISCOUNT FOR BIS
3(CLASSIFICATION OF PIPES)	-	500	25 % DISCOUNT FOR BIS
4.1(Quick Coupled Male and Female Couplers)	-	500	25 % DISCOUNT FOR BIS
4.1.3(Workmanship and appearance)	-	300	25 % DISCOUNT FOR BIS
4.1.4(Holding attachments for coupler parts)	-	2625	25 % DISCOUNT FOR BIS
6.1.3(Weldability Test- a) Quality test)	-	4800	25 % DISCOUNT FOR BIS
6.1.3(Weldability Test- b) Acceptance test)	-	1600	25 % DISCOUNT FOR BIS
3(QUICK COUPLED PIPES)	-	300	25 % DISCOUNT FOR BIS
4(QUICK COUPLED FITTINGS)	-	300	25 % DISCOUNT FOR BIS
4.1 (a)(Quick Coupled Male and Female Couplers)	-	300	25 % DISCOUNT FOR BIS
4.1 (b)(HDPE couplers —)	-	300	25 % DISCOUNT FOR BIS
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Aluminium Content)	-	1050	25 % DISCOUNT FOR BIS
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Copper Content)	-	1050	25 % DISCOUNT FOR BIS
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Magnesium Content)	-	1050	25 % DISCOUNT FOR BIS
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Silicon Content)	-	1050	25 % DISCOUNT FOR BIS
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Iron Content)	-	1050	25 % DISCOUNT FOR BIS
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Manganese Content)	-	1050	25 % DISCOUNT FOR BIS
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Zinc Content)	-	1050	25 % DISCOUNT FOR BIS
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Titanium Content)	-	1050	25 % DISCOUNT FOR BIS
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Chromium Content)	-	1050	25 % DISCOUNT FOR BIS
6.2 (iii) Rubber Rings (a) Shore hardness(Shore hardness)	-	375	25 % DISCOUNT FOR BIS
6.2 (iii) Rubber Rings (b) Accelerated Storage test(Accelerated Storage test)	-	4575	25 % DISCOUNT FOR BIS
10(Marking)	-	300	25 % DISCOUNT FOR BIS

23 Feb, 2027

-
Included w.e.f.19.12.2024

8377

Astute Labs Pvt Ltd, Pune

7174321

IS/IEC 80601 : Part 2 : Sec 30 (2018)

Medical electrical equipment: Part 2 - 30 particular requirements for basic safety and essential performance of automated non - Invasive sphygmomanometers

700000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
212(Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment)	-	30000	-
211(Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment)	-	30000	-
210(Requirements for the development of physiologic closed-loop controllers)	-	30000	-
206(Usability)	-	30000	-
201.106(Clinical accuracy)	-	30000	-
201.105(Automatic cycling modes)	-	30000	-
201.103(Maximum inflating time)	-	30000	-
201.102(Connection tubing and CUFF connectors)	-	30000	-
201.101(Requirements for CUFFS)	-	30000	-
201.16(ME SYSTEMS)	-	20000	-
201.15(Construction of ME EQUIPMENT)	-	30000	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS))	-	20000	-
201.13(HAZARDOUS SITUATIONS and fault conditions for ME EQUIPMENT)	-	30000	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	30000	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	40000	-
201.1(Protection against unwanted and excessive radiation HAZARDS)	-	40000	-
201.9(Protection against mechanical HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	50000	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	60000	-
201.7(ME EQUIPMENT identification, marking and documents)	-	30000	-
201.6(Classification of ME EQUIPMENT and ME SYSTEMS)	-	30000	-
201.5(General requirements for testing ME EQUIPMENT)	-	30000	-
201.4(General)	-	20000	-
212(Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment)	-	0	-
211(Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment)	-	0	-
210(Requirements for the development of physiologic closed-loop controllers)	-	0	-
206(Usability)	-	0	-
201.106(Clinical accuracy)	-	0	-
201.105(Automatic cycling modes)	-	0	-
201.103(Maximum inflating time)	-	0	-
201.102(Connection tubing and CUFF connectors)	-	0	-
201.101(Requirements for CUFFS)	-	0	-
201.16(ME SYSTEMS)	-	0	-
201.15(Construction of ME EQUIPMENT)	-	0	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS))	-	0	-
201.13(HAZARDOUS SITUATIONS and fault conditions for ME EQUIPMENT)	-	0	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	0	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	0	-
201.1(Protection against unwanted and excessive radiation HAZARDS)	-	0	-
201.9(Protection against mechanical HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	0	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	0	-
201.7(ME EQUIPMENT identification, marking and documents)	-	0	-
201.6(Classification of ME EQUIPMENT and ME SYSTEMS)	-	0	-
201.5(General requirements for testing ME EQUIPMENT)	-	0	-
201.4(General)	-	0	-
212(Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment)	-	0	-
211(Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment)	-	0	-
210(Requirements for the development of physiologic closed-loop controllers)	-	0	-
206(Usability)	-	0	-
201.106(Clinical accuracy)	-	0	-
201.105(Automatic cycling modes)	-	0	-
201.103(Maximum inflating time)	-	0	-
201.102(Connection tubing and CUFF connectors)	-	0	-
201.101(Requirements for CUFFS)	-	0	-
201.16(ME SYSTEMS)	-	0	-
201.15(Construction of ME EQUIPMENT)	-	0	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS))	-	0	-
201.13(HAZARDOUS SITUATIONS and fault conditions for ME EQUIPMENT)	-	0	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	0	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	0	-
201.1(Protection against unwanted and excessive radiation HAZARDS)	-	0	-
201.9(Protection against mechanical HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	0	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	0	-
201.7(ME EQUIPMENT identification, marking and documents)	-	0	-
201.6(Classification of ME EQUIPMENT and ME SYSTEMS)	-	0	-
201.5(General requirements for testing ME EQUIPMENT)	-	0	-
201.4(General)	-	0	-

05 Nov, 2029

-
Included w.e.f.17.03.2025 Exclusion CL 201.17 (Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS) CL 202.8 (Electromagnetic IMMUNITY requirements for ME EQUIPMENT and ME SYSTEMS) CL 202 (Electromagnetic disturbances – Requirements and tests)

8378

Astute Labs Pvt Ltd, Pune

7174321

IS 13450 : Part 2 : Sec 18 (2014)

Medical electrical equipment: Part 2 particular requirements for the basic safety and essential performance: Sec 18 endoscopic equipment

600000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
201.4(General requirements)	-	40000	-
201.5(General requirements for testing of ME EQUIPMENT)	-	40000	-
201.6(Classification of ME EQUIPMENT and ME SYSTEMS)	-	40000	-
201.7(ME EQUIPMENT identification, marking and documents)	-	40000	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	60000	-
201.9(Protection against MECHANICAL HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	60000	-
201.1(Protection against unwanted and excessive radiation HAZARDS)	-	40000	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	60000	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	60000	-
201.13(HAZARDOUS SITUATIONS and fault conditions)	-	50000	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS))	-	30000	-
201.15(Construction of ME EQUIPMENT)	-	50000	-
201.16(ME SYSTEMS)	-	30000	-
201.4(General requirements)	-	0	-
201.5(General requirements for testing of ME EQUIPMENT)	-	0	-
201.6(Classification of ME EQUIPMENT and ME SYSTEMS)	-	0	-
201.7(ME EQUIPMENT identification, marking and documents)	-	0	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	0	-
201.9(Protection against MECHANICAL HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	0	-
201.1(Protection against unwanted and excessive radiation HAZARDS)	-	0	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	0	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	0	-
201.13(HAZARDOUS SITUATIONS and fault conditions)	-	0	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS))	-	0	-
201.15(Construction of ME EQUIPMENT)	-	0	-
201.16(ME SYSTEMS)	-	0	-
201.4(General requirements)	-	0	-
201.5(General requirements for testing of ME EQUIPMENT)	-	0	-
201.6(Classification of ME EQUIPMENT and ME SYSTEMS)	-	0	-
201.7(ME EQUIPMENT identification, marking and documents)	-	0	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	0	-
201.9(Protection against MECHANICAL HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	0	-
201.1(Protection against unwanted and excessive radiation HAZARDS)	-	0	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	0	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	0	-
201.13(HAZARDOUS SITUATIONS and fault conditions)	-	0	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS))	-	0	-
201.15(Construction of ME EQUIPMENT)	-	0	-
201.16(ME SYSTEMS)	-	0	-

05 Nov, 2029

-
Included w.e.f.17.03.2025 Exclusion Cl 201.17 (Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS) Cl 202 (Electromagnetic compatibility – Requirements and tests)

8379

Astute Labs Pvt Ltd, Pune

7174321

IS 13450 : Part 2 : Sec 21 (2018)

Medical electrical equipment: Part 2 particular requirements for the basic safety and essential performance: Sec 21 infant radiant warmer

700000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
201.4(General requirements)	-	50000	-
201.5(General requirements for testing of ME EQUIPMENT)	-	50000	-
201.6(Classification Of ME equipment and ME systems)	-	50000	-
201.7(ME EQUIPMENT identification, marking and documents)	-	50000	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	60000	-
201.9(Protection against MECAHNICAL HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	60000	-
201.10(Protection against unwanted and excessive radiation HAZARDS)	-	50000	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	50000	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	80000	-
201.13(HAZARDOUS SITUATIONS and fault conditions)	-	50000	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS))	-	50000	-
201.15(Construction of ME EQUIPMENT)	-	50000	-
201.16(ME SYSTEMS)	-	50000	-
201.4(General requirements)	-	0	-
201.5(General requirements for testing of ME EQUIPMENT)	-	0	-
201.6(Classification Of ME equipment and ME systems)	-	0	-
201.7(ME EQUIPMENT identification, marking and documents)	-	0	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	0	-
201.9(Protection against MECAHNICAL HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	0	-
201.10(Protection against unwanted and excessive radiation HAZARDS)	-	0	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	0	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	0	-
201.13(HAZARDOUS SITUATIONS and fault conditions)	-	0	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS))	-	0	-
201.15(Construction of ME EQUIPMENT)	-	0	-
201.16(ME SYSTEMS)	-	0	-
201.4(General requirements)	-	0	-
201.5(General requirements for testing of ME EQUIPMENT)	-	0	-
201.6(Classification Of ME equipment and ME systems)	-	0	-
201.7(ME EQUIPMENT identification, marking and documents)	-	0	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	0	-
201.9(Protection against MECAHNICAL HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	0	-
201.10(Protection against unwanted and excessive radiation HAZARDS)	-	0	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	0	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	0	-
201.13(HAZARDOUS SITUATIONS and fault conditions)	-	0	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS))	-	0	-
201.15(Construction of ME EQUIPMENT)	-	0	-
201.16(ME SYSTEMS)	-	0	-

05 Nov, 2029

-
Included w.e.f.09.04.2025 Exclusion Cl 201.17 (Electromagnetic compatibility of ME equipment and ME systems) Cl 202 (Electromagnetic compatibility-Requirement and tests)

8380

Astute Labs Pvt Ltd, Pune

7174321

IS 13450 : Part 2 : Sec 19 (2018)

Medical electrical equipment: Part 2 particular requirements for the basic safety and essential performance: Sec 19 baby incubator

700000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
201.4(General requirements)	-	50000	-
201.5(General requirements for testing of ME EQUIPMENT)	-	50000	-
201.6(Classification Of ME equipment and ME systems)	-	50000	-
201.7(ME EQUIPMENT identification, marking and documents)	-	50000	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	60000	-
201.9(Protection against MECAHNICAL HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	60000	-
201.10(Protection against unwanted and excessive radiation HAZARDS)	-	50000	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	50000	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	80000	-
201.13(HAZARDOUS SITUATIONS and fault conditions)	-	50000	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS))	-	50000	-
201.15(Construction of ME EQUIPMENT)	-	50000	-
201.16(ME SYSTEMS)	-	50000	-
201.4(General requirements)	-	0	-
201.5(General requirements for testing of ME EQUIPMENT)	-	0	-
201.6(Classification Of ME equipment and ME systems)	-	0	-
201.7(ME EQUIPMENT identification, marking and documents)	-	0	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	0	-
201.9(Protection against MECAHNICAL HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	0	-
201.10(Protection against unwanted and excessive radiation HAZARDS)	-	0	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	0	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	0	-
201.13(HAZARDOUS SITUATIONS and fault conditions)	-	0	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS))	-	0	-
201.15(Construction of ME EQUIPMENT)	-	0	-
201.16(ME SYSTEMS)	-	0	-
201.4(General requirements)	-	0	-
201.5(General requirements for testing of ME EQUIPMENT)	-	0	-
201.6(Classification Of ME equipment and ME systems)	-	0	-
201.7(ME EQUIPMENT identification, marking and documents)	-	0	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	0	-
201.9(Protection against MECAHNICAL HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	0	-
201.10(Protection against unwanted and excessive radiation HAZARDS)	-	0	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	0	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	0	-
201.13(HAZARDOUS SITUATIONS and fault conditions)	-	0	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS))	-	0	-
201.15(Construction of ME EQUIPMENT)	-	0	-
201.16(ME SYSTEMS)	-	0	-

05 Nov, 2029

-
Included w.e.f.09.04.2025 Exclusion Cl 201.17 (Electromagnetic compatibility of ME equipment and ME systems) Cl 202 (Electromagnetic compatibility-Requirement and tests)

8381

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY - CIPET, HALDIA

5116334

IS 7834 : Part 8 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 8 Specific requirements for caps

All sizes

6563 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(General)	-	5250	(Test charges 5250 ) Discount of 25 % is applicable on total test charges only for BIS. 1. Opacity = 700 2. HPT = 850 3. Effect on water = 3000 4. Stress relief test = 700
2.2(Manufacture)	-	0	-
2.2.2(diameter of the socket of cap)	-	500	Discount of 25 % is applicable on total test charges only for BIS.
2.1(General)	-	0	-
2.2(Manufacture)	-	0	-
2.2.2(diameter of the socket of cap)	-	0	-
6.1.1(VCM Content Test)	-	3000	Discount of 25 % is applicable on total test charges only for BIS.
2.2.2 table 1(Laying length)	-	0.02	-

14 Dec, 2027

-
Included w.e.f.04.12.2024

8382

Astute Labs Pvt Ltd, Pune

7174321

IS 13450 : PART 2 : SEC 4 (2018)

Medical electrical equipment: Part 2 particular requirements for the basic safety and essential performance: Sec 4 cardiac defibrillators (First Revision)

800000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
201.4(General requirements)	-	60000	-
201.5(General requirements for testing of ME EQUIPMENT)	-	60000	-
201.6(Classification Of ME equipment and ME systems)	-	60000	-
201.7(ME EQUIPMENT identification, marking and documents)	-	60000	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	80000	-
201.9(Protection against MECAHNICAL HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	80000	-
201.10(Protection against unwanted and excessive radiation HAZARDS)	-	50000	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	60000	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	80000	-
201.13(HAZARDOUS SITUATIONS and fault conditions)	-	80000	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS))	-	25000	-
201.15(Construction of ME EQUIPMENT)	-	80000	-
201.16(ME SYSTEMS)	-	25000	-
201.4(General requirements)	-	0	-
201.5(General requirements for testing of ME EQUIPMENT)	-	0	-
201.6(Classification Of ME equipment and ME systems)	-	0	-
201.7(ME EQUIPMENT identification, marking and documents)	-	0	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	0	-
201.9(Protection against MECAHNICAL HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	0	-
201.10(Protection against unwanted and excessive radiation HAZARDS)	-	0	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	0	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	0	-
201.13(HAZARDOUS SITUATIONS and fault conditions)	-	0	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS))	-	0	-
201.15(Construction of ME EQUIPMENT)	-	0	-
201.16(ME SYSTEMS)	-	0	-
201.4(General requirements)	-	0	-
201.5(General requirements for testing of ME EQUIPMENT)	-	0	-
201.6(Classification Of ME equipment and ME systems)	-	0	-
201.7(ME EQUIPMENT identification, marking and documents)	-	0	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	0	-
201.9(Protection against MECAHNICAL HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	0	-
201.10(Protection against unwanted and excessive radiation HAZARDS)	-	0	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	0	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	0	-
201.13(HAZARDOUS SITUATIONS and fault conditions)	-	0	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS))	-	0	-
201.15(Construction of ME EQUIPMENT)	-	0	-
201.16(ME SYSTEMS)	-	0	-

05 Nov, 2029

-
Included w.e.f.09.04.2025 Exclusion Cl 201.17 (Electromagnetic compatibility of ME equipment and ME systems) Cl 202 (Electromagnetic compatibility-Requirement and tests)

8383

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY - CIPET, HALDIA

5116334

IS 7834 : Part 7 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 7 Specific requirements for unions

All Sizes

6563 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
table 1 sl.no: 01(16 )	-	0	-
table 1 sl.no: 02(20 )	-	0	-
table 1 sl.no: 03(25 )	-	0	-
table 1 sl.no: 04(32 )	-	0	-
table 1 sl.no: 05(40 )	-	0	-
table 1 sl.no: 06(50 )	-	0	-
table 1 sl.no: 07(63 )	-	0	-
2.1(General)	-	5250	(Test charges 5250 ) Discount of 25 % is applicable on total test charges only for BIS. 1. Opacity = 700 2. HPT = 850 3. Effect on water = 3000 4.Stress relief test = 700
2.2(Manufacture)	-	0	-
2.2.2, Table 1(Size)	-	0	-
2.2.2, Table 1(Union Laying Length)	-	0	-
2.2.3( inside diameter of the socket)	-	500	Discount of 25 % is applicable on total test charges only for BIS.
2.2.3(Socket length)	-	0	-
2.1(General)	-	0	-
2.2(Manufacture)	-	0	-
2.2.2, Table 1(Size)	-	0	-
2.2.2, Table 1(Union Laying Length)	-	0	-
2.2.3( inside diameter of the socket)	-	0	-
2.2.3(Socket length)	-	0	-
6.1.1(VCM Content Test)	-	3000	Discount of 25 % is applicable on total test charges only for BIS.
2.2.2 table 1(Laying length)	-	0.01	-

14 Dec, 2027

-
Included w.e.f.03.12.2024

8384

LUCID LABORATORIES PRIVATE LIMITED, HYDERABAD

6121636

IS 5522 (2014)

Stainless steel sheets and strips for utensils - Specification (Third Revision)

9600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.1 & 7.2 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	-
Cl. 7.1 & 7.2 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	-
Cl. 7.1 & 7.2 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	-
Cl. 7.1 & 7.2 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	-
Cl. 7.1 & 7.2 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	-
Cl. 7.1 & 7.2 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	-
Cl. 7.1 & 7.2 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	-
Cl. 7.1 & 7.2 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
8.2, Table 3(Tensile Test-1608:Part 1)	-	0	-
8.2, Table 3(Proof Stress, N/mm2)	-	1000	-
8.2, Table 3(Tensile Strength, N/mm2)	-	1000	-
8.2, Table 3(Elongation, %)	-	1000	-
8.3(Hardness , max-IS 1500 or IS 1501 (Part 1) or IS 1586)	-	1000	-
8.4(Bend Test)	-	500	-
8.5(Erichsen Cupping Test)	-	500	-
10.1(Thickness, mm)	-	100	-
10.2(width, mm)	-	100	-
10.3(Length, mm)	-	100	-
10.4(Flatness,mm)	-	100	-
10.5(Camber, mm)	-	100	-
11(Surface Finish)	-	100	-
Cl . 6 .0(Freedom from defect)	-	100	-
13(Marking)	-	100	-

19 Apr, 2028

-
-

8385

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

All Grade

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 9.4(Load In Other Direction From Bend)	-	6500	-
Cl 9.3(Load In One Direction)	-	6500	-
Cl 7.2(Weight)	-	6500	-
Cl 6.1(Length, Width & Thickness)	-	6500	-
Cl 9.4(Load In Other Direction From Bend)	-	6500	-
Cl 9.3(Load In One Direction)	-	6500	-
Cl 7.2(Weight)	-	6500	-
Cl 6.1(Length, Width & Thickness)	-	6500	-
Cl 9.4(Load In Other Direction From Bend)	-	6500	-
Cl 9.3(Load In One Direction)	-	6500	-
Cl 8.1(UTM)	-	6500	-
Cl 7.2(Weight)	-	6500	-
Cl 6.1(Length, Width & Thickness)	-	6500	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON +EQUIVELENT )	-	6000	-
4.1(Sulphur and phosphorous)	-	6000	-
4.1(CE)	-	6000	-
4.1( Nitrogen%)	-	6000	-
4.1(Ni)	-	6000	-
4.1(Mo)	-	6000	-
4.1(Cr)	-	6000	-
4.1( Ti)	-	6000	-
4.1(V)	-	6000	-
4.1( Nb)	-	6000	-
4.1( Aluminium %)	-	6000	-
4.1( Copper %)	-	6000	-
4.1(Silicon %)	-	6000	-
4.1(Sulphur %)	-	6000	-
4.1(Phosphorus %)	-	6000	-
4.1(Manganese %)	-	6000	-
4.1(Carbon %)	-	6000	-
Cl.9.4 & Cl. 9.4.1(Rebend test)	-	6500	-
Cl. 9.3, Table 4(Bend Test )	-	6500	-
Cl. 8.1 Table 3(Elongation, percentage)	-	6500	-
Cl. 8.1 Table 3(TS/YS ratio)	-	6500	-
Cl. 8.1 Table 3(Tensile Strength (TS))	-	6500	-
Cl. 8.1 Table 3(Yield Stress (YS))	-	6500	-
Cl. 7.2 Table -2 (Nominal Mass)	-	6500	-
Cl. 6.1(Nominal Size)	-	6500	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR+PHOSPHUR)	-	6000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 MANGANESE)	-	6000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 NITROGEN)	-	6000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 PHOSPHURS)	-	6000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR)	-	6000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON )	-	6000	-
Cl.4.2 of IS 1786 (Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6000	-
Cl.4.2 of IS 1786 (Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6000	-
Cl.4.2 of IS 1786 (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6000	-
Cl.4.2 of IS 1786 (Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6000	-
Cl.4.2 of IS 1786 (Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6000	-
Cl.4.2 of IS 1786 (Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6000	-
Cl.4.2 of IS 1786 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6000	-
Cl.4.2 of IS 1786 (Grade:- Fe 415D,Fe 415S, Fe 500D,Fe 500S,Fe 550D)(Carbon Equivalent)	-	6000	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur & Phosphorous)	-	6000	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Phosphorous- IS 228)	-	6000	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur-IS 228)	-	6000	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Carbon-IS 228)	-	6000	-
8.18.1 Table 3(Total elongation at maximum force)	-	6500	-
4.2(Niobium (Nb))	-	6500	-
4.2(Boron (B))	-	6500	-
Cl. 8.1 Table 3(TS/YS Ratio)	-	6500	-
Cl. 8.1 Table 3(Maximum Extension)	-	6500	-
Cl. 8.1 Table 3(Total Elongation at Maximum Force)	-	6500	-
Cl. 6.2, 6.3 Table 1(Gross Cross Sectional Area, A)	-	6500	-
Cl. 4.3(Visual Inspection.)	-	6500	-
Clause 9.4(Rebend Test)	-	6500	-
Clause 6.3(Effective Cross-sectional Area)	-	6500	-
Clause 8.1(Table 3)(Total Elongation at Maximum Force)	-	6500	-
Cl 9.4(Load In Other Direction From Bend)	-	6500	-
Cl 9.3(Load In One Direction)	-	6500	-
Cl 8.1(UTM)	-	6500	-
Cl 7.2(Weight)	-	6500	-
Cl 6.1(Length, Width & Thickness)	-	6500	-
Cl 6.1(Length, Width & Thickness)	-	6500	-
Cl 7.2(Weight)	-	6500	-
Cl 8.1(UTM)	-	6500	-
Cl 9.3(Load In One Direction)	-	6500	-
Cl 9.4(Load In Other Direction From Bend)	-	6500	-
7.0 & 7.1(Specified lengths - SOP MT-23)	-	6500	-
8.0 & 8.1("Total elongation at maximum force on 5.65 vSo mm GL. ")	-	6500	-
7.1(Specified length)	-	6500	-
9.2(Tensile test,IS:1608(Pt1)-2018)	-	6500	-
9.5(Retest)	-	6500	-
Clause 4.2 Note 2, Amendment 1 & 3(Nb+V+B+Ti)	-	6000	-
Clause 4.2 Note 3, Amendment 1 & 3(Cr+Cu+Ni+Mo+P)	-	6000	-
Clause 4.2, Amendment 3 Note 4("In order to ascertain whether sufficient quantities of nitrogen binding elements are present, following formula may be used, where all elements are in ppm. (N−120)< (Al free/10)+((Ti+V)/7)+(Nb/14)")	-	6000	-
Cl.4.2 of IS 1786 (Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6000	-
Cl.4.2 of IS 1786 (Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6000	-
Cl.4.2 of IS 1786 (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6000	-
Cl.4.2 of IS 1786 (Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6000	-
Cl.4.2 of IS 1786 (Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6000	-
Cl.4.2 of IS 1786 (Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6000	-
Cl.4.2 of IS 1786 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6000	-
Cl.4.2 of IS 1786 (Grade:- Fe 415D,Fe 415S, Fe 500D,Fe 500S,Fe 550D)(Carbon Equivalent)	-	6000	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur & Phosphorous)	-	6000	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Phosphorous- IS 228)	-	6000	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur-IS 228)	-	6000	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Carbon-IS 228)	-	6000	-
8.18.1 Table 3(Total elongation at maximum force)	-	6500	-
4.2(Niobium (Nb))	-	6000	-
4.2(Boron (B))	-	6000	-
Cl. 8.1 Table 3(TS/YS Ratio)	-	6500	-
Cl. 8.1 Table 3(Maximum Extension)	-	6500	-
Cl. 8.1 Table 3(Total Elongation at Maximum Force)	-	6500	-
Cl. 6.2, 6.3 Table 1(Gross Cross Sectional Area, A)	-	6500	-
Cl. 4.3(Visual Inspection.)	-	6500	-
Clause 9.4(Rebend Test)	-	6500	-
Clause 6.3(Effective Cross-sectional Area)	-	6500	-
Clause 8.1(Table 3)(Total Elongation at Maximum Force)	-	6500	-
Cl 9.4(Load In Other Direction From Bend)	-	6500	-
Cl 9.3(Load In One Direction)	-	6500	-
Cl 8.1(UTM)	-	6500	-
Cl 7.2(Weight)	-	6500	-
Cl 6.1(Length, Width & Thickness)	-	6500	-
Cl 6.1(Length, Width & Thickness)	-	6500	-
Cl 7.2(Weight)	-	6500	-
Cl 8.1(UTM)	-	6500	-
Cl 9.3(Load In One Direction)	-	6500	-
Cl 9.4(Load In Other Direction From Bend)	-	6500	-
7.0 & 7.1(Specified lengths - SOP MT-23)	-	6500	-
8.0 & 8.1("Total elongation at maximum force on 5.65 vSo mm GL. ")	-	6500	-
7.1(Specified length)	-	6500	-
9.2(Tensile test,IS:1608(Pt1)-2018)	-	6500	-
9.5(Retest)	-	6500	-
Clause 4.2 Note 2, Amendment 1 & 3(Nb+V+B+Ti)	-	6000	-
Clause 4.2 Note 3, Amendment 1 & 3(Cr+Cu+Ni+Mo+P)	-	6000	-
Clause 4.2, Amendment 3 Note 4("In order to ascertain whether sufficient quantities of nitrogen binding elements are present, following formula may be used, where all elements are in ppm. (N−120)< (Al free/10)+((Ti+V)/7)+(Nb/14)")	-	6000	-
Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar))	-	6500	-
Cl 5(Deformations and Surface Characteristics)	-	6500	-
Cl 5(Deformations and Surface Characteristics)	-	6500	-
Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), )	-	6500	-
Cl. 5.2(Surface Characteristics)	-	6500	-
Cl 5(Deformations and Surface Characteristics)	-	6500	-
Cl 5(Deformations and Surface Characteristics)	-	6500	-
Cl. 5.3 (b)(The ribs contributing the projected area - Transverse Ribs)	-	6500	-
Cl. 5.3 (a)(The ribs contributing the projected area - Longitudinal Ribs)	-	6500	-
13(Identification and marking)	-	0	-
9.1(Preparation of test sample)	-	0	-
12(Inspection)	-	0	-
Cl 5(Deformations and Surface Characteristics)	-	6500	-
Cl 5(Deformations and Surface Characteristics)	-	6500	-
Cl.4.2 of IS 1786 (Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.4.2 of IS 1786 (Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.4.2 of IS 1786 (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.4.2 of IS 1786 (Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.4.2 of IS 1786 (Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.4.2 of IS 1786 (Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.4.2 of IS 1786 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.4.2 of IS 1786 (Grade:- Fe 415D,Fe 415S, Fe 500D,Fe 500S,Fe 550D)(Carbon Equivalent)	-	0	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur & Phosphorous)	-	0	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Phosphorous- IS 228)	-	0	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur-IS 228)	-	0	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Carbon-IS 228)	-	0	-
8.18.1 Table 3(Total elongation at maximum force)	-	0	-
4.2(Niobium (Nb))	-	0	-
4.2(Boron (B))	-	0	-
Cl. 8.1 Table 3(TS/YS Ratio)	-	0	-
Cl. 8.1 Table 3(Maximum Extension)	-	0	-
Cl. 8.1 Table 3(Total Elongation at Maximum Force)	-	0	-
Cl. 6.2, 6.3 Table 1(Gross Cross Sectional Area, A)	-	0	-
Cl. 4.3(Visual Inspection.)	-	0	-
Clause 9.4(Rebend Test)	-	0	-
Clause 6.3(Effective Cross-sectional Area)	-	0	-
Clause 8.1(Table 3)(Total Elongation at Maximum Force)	-	0	-
Cl 9.4(Load In Other Direction From Bend)	-	0	-
Cl 9.3(Load In One Direction)	-	0	-
Cl 8.1(UTM)	-	0	-
Cl 7.2(Weight)	-	0	-
Cl 6.1(Length, Width & Thickness)	-	0	-
Cl 6.1(Length, Width & Thickness)	-	0	-
Cl 7.2(Weight)	-	0	-
Cl 8.1(UTM)	-	0	-
Cl 9.3(Load In One Direction)	-	0	-
Cl 9.4(Load In Other Direction From Bend)	-	0	-
7.0 & 7.1(Specified lengths - SOP MT-23)	-	0	-
8.0 & 8.1("Total elongation at maximum force on 5.65 vSo mm GL. ")	-	0	-
7.1(Specified length)	-	0	-
9.2(Tensile test,IS:1608(Pt1)-2018)	-	0	-
9.5(Retest)	-	0	-
Clause 4.2 Note 2, Amendment 1 & 3(Nb+V+B+Ti)	-	0	-
Clause 4.2 Note 3, Amendment 1 & 3(Cr+Cu+Ni+Mo+P)	-	0	-
Clause 4.2, Amendment 3 Note 4("In order to ascertain whether sufficient quantities of nitrogen binding elements are present, following formula may be used, where all elements are in ppm. (N−120)< (Al free/10)+((Ti+V)/7)+(Nb/14)")	-	0	-
Cl 5(Deformations and Surface Characteristics)	-	0	-
Cl. 5.2(Surface Characteristics)	-	0	-
Cl 5(Deformations and Surface Characteristics)	-	0	-
Cl 5(Deformations and Surface Characteristics)	-	0	-
Cl. 5.3 (b)(The ribs contributing the projected area - Transverse Ribs)	-	0	-
Cl. 5.3 (a)(The ribs contributing the projected area - Longitudinal Ribs)	-	0	-
13(Identification and marking)	-	0	-
9.1(Preparation of test sample)	-	0	-
12(Inspection)	-	0	-
Cl 5(Deformations and Surface Characteristics)	-	0	-

-
Included w.e.f.23.07.2025 Exclusion:- 5.7 (PullOut (Bond Test))

8386

Astute Labs Pvt Ltd, Pune

7174321

IS 13450 : Part 2 : Sec 13 (2024)

Medical Electrical Equipment: Part 2 Particular Requirements for the Basic Safety and Essential Performance: Sec 13 Anaesthetic Workstation (First Revision)

900000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
201.4(General requirements)	-	50000	-
201.5(General requirements for testing ME equipment)	-	50000	-
201.6(Classification of ME equipment or ME systems)	-	50000	-
201.7(ME equipment identification, marking and documents)	-	50000	-
201.8(Protection against electrical hazards from ME equipment)	-	50000	-
201.9(Protection against mechanical hazards of ME equipment and ME systems)	-	50000	-
201.10(Protection against unwanted and excessive radiation hazards)	-	50000	-
201.11(Protection against excessive temperatures and other hazards)	-	50000	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	50000	-
201.13(Hazardous situations and fault conditions)	-	50000	-
201.14(Programmable electrical medical systems (PEMS))	-	50000	-
201.15(Construction of ME equipment)	-	50000	-
201.16(ME systems)	-	50000	-
201.101(Additional requirements for anaesthetic gas delivery systems)	-	20000	-
201.102(Additional requirements for an anaesthetic breathing system)	-	20000	-
201.103(Additional requirements for an AGSS)	-	20000	-
201.104(Additional requirements for interchangeable and non-interchangeable anaesthetic vapour delivery systems)	-	20000	-
201.105(Additional requirements for an anaesthetic ventilator)	-	20000	-
201.106(Display of pressure-volume loops)	-	30000	-
201.107(Clinical evaluation)	-	40000	-
206(Usability)	-	40000	-
208(General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems)	-	40000	-
201.4(General requirements)	-	0	-
201.4.4(Additional requirements for expected service life)	-	0	-
201.4.10(Power supply)	-	0	-
201.4.10.101(Requirements for pneumatic power input)	-	0	-
201.5.101.3(Gas flow rate and leakage specifications)	-	0	-
201.8.11.3(Power supply cords)	-	0	-
201.9.2.1(General)	-	0	-
201.9.2.101(Maintenance points)	-	0	-
201.9.2.102(Lighting)	-	0	-
201.9.2.103(Integrated seating)	-	0	-
201.9.2.104(Arrangement of control positions)	-	0	-
201.9.4(Instability hazards)	-	0	-
201.9.4.2.4.3(Movement over a threshold)	-	0	-
201.11.6.3(Spillage on ME equipment and ME systems)	-	0	-
201.11.6.8(Compatibility with substances used with the ME equipment)	-	0	-
201.11.8(Interruption of the power supply/supply mains to ME equipment)	-	0	-
201.11.8.102(Alarm condition for power supply failure)	-	0	-
201.11.8.103(Internal electrical power source)	-	0	-
201.11.101(Packaging systems for components intended to be sterilized)	-	0	-
201.12.4(Protection against hazardous output)	-	0	-
201.12.4.101(Accidental adjustment of operating controls)	-	0	-
201.12.4.102(Additional requirements for anaesthetic workstations)	-	0	-
201.12.4.103(Respiratory gas monitoring equipment)	-	0	-
201.12.4.103.1(Carbon dioxide monitoring equipment)	-	0	-
201.12.4.103.2(Oxygen monitoring equipment)	-	0	-
201.12.4.103.3(Anaesthetic agent monitoring equipment)	-	0	-
201.12.4.104(Exhaled volume monitoring equipment)	-	0	-
201.12.4.104.1(Accuracy)	-	0	-
201.12.4.104.2(Alarm conditions)	-	0	-
201.12.4.105(Anaesthetic breathing system integrity alarm condition)	-	0	-
201.12.4.106(Anaesthetic breathing system continuing-positive-pressure alarm condition)	-	0	-
201.12.4.107.1(Oxygen supply failure alarm system)	-	0	-
201.12.4.107.2(Oxygen supply failure protection device)	-	0	-
201.12.4.107.3(Hypoxic mixture delivery selection protection device)	-	0	-
201.12.4.108(Protection device for the workplace environment)	-	0	-
201.12.4.109(Protection device for the workplace environment)	-	0	-
201.13.101(Simultaneous failure)	-	0	-
201.14.6.1(Identification of known and foreseeable hazards)	-	0	-
201.14.101(Software life cycle processes)	-	0	-
201.15.3.5(Rough handling test)	-	0	-
201.15.101(Operator-detachable, flow-direction-sensitive parts and accessories)	-	0	-
201.16.9.2.1(Multiple socket-outlet)	-	0	-
201.16.101.1(General)	-	0	-
201.16.101.2(Connection to other equipment for network/data coupling)	-	0	-
201.16.101.3(Connection to distributed alarm system/information system)	-	0	-
201.101.1.1(Instructions for use)	-	0	-
201.101.1.2(Technical description)	-	0	-
201.101.2(Interruption of the electrical power supply)	-	0	-
201.101.3(Protection against cross-contamination of volatile anaesthetic agents)	-	0	-
201.101.4(Medical gas supply)	-	0	-
201.101.4.1.1(Inlet connector)	-	0	-
201.101.4.1.2(Inlet filtration)	-	0	-
201.101.4.1.3(Pressure regulators)	-	0	-
201.101.4.1.4(Reserve oxygen supply)	-	0	-
201.101.4.2.1(Inlet connector)	-	0	-
201.101.4.2.2(Inlet filtration)	-	0	-
201.101.4.2.3(Reverse flow and cross-flow protection device)	-	0	-
201.101.4.3(Pressure or content monitoring equipment)	-	0	-
201.101.5.1(Leakage prior to the flow rate adjustment control element)	-	0	-
201.101.5.2(Leakage after the flow rate adjustment control element)	-	0	-
201.101.6.1(Graduations and accuracy)	-	0	-
201.101.6.2(Flow rate adjustment control)	-	0	-
201.101.6.3(Carbon dioxide flow rate adjustment control)	-	0	-
201.101.7(Gas mixers)	-	0	-
201.101.8(Oxygen flush)	-	0	-
201.101.9(Fresh-gas outlet)	-	0	-
201.101.10(Interface to interchangeable anaesthetic vapour delivery systems)	-	0	-
201.102.1.1.1(Non-metallic parts)	-	0	-
201.102.1.1.2(Bag/ventilator control)	-	0	-
201.102.1.1.3(Absorbent bypass)	-	0	-
201.102.1.1.4(Inspiratory and expiratory ports of a circle absorber assembl)	-	0	-
201.102.1.2(Instructions for use)	-	0	-
201.102.2(Pressure limitation protection devices)	-	0	-
201.102.2.1(Maximum limited pressure protection device)	-	0	-
201.102.2.2(Adjustable pressure limit protection device)	-	0	-
201.102.3(Packaging of parts of anaesthetic breathing systems)	-	0	-
201.102.4(Electrical conductivity)	-	0	-
201.102.5.2(Exhaust port connector)	-	0	-
201.102.5.1(Patient connection port)	-	0	-
201.102.5.3.1(Arrangement and connector)	-	0	-
201.102.5.3.2(Marking)	-	0	-
201.102.5.3.3(Connectors of the reservoir bag connecting tube)	-	0	-
201.102.5.4(Anaesthetic ventilator port connector)	-	0	-
201.102.5.5(Anaesthetic breathing system port connector)	-	0	-
201.102.5.6(Inspiratory and expiratory port connectors of a circle absorber assembly)	-	0	-
201.102.5.7(Other port connectors)	-	0	-
201.102.6(Leakage)	-	0	-
201.102.7(Inspiratory and expiratory pressure/flow rate characteristics)	-	0	-
201.102.8.1(Y-piece)	-	0	-
201.102.8.2(Exhaust valve)	-	0	-
201.102.8.3(Breathing tubes)	-	0	-
201.102.9.1(Constructional requirements)	-	0	-
201.102.9.2(Absorbent bypass mechanism)	-	0	-
201.102.9.3(Resistance to flow rate)	-	0	-
201.102.10.2(Opening pressure)	-	0	-
201.102.10.3(Pressure flow-rate characteristics)	-	0	-
201.102.10.4(Reverse flow rate and dislocation)	-	0	-
201.102.11(Fresh-gas inlet)	-	0	-
201.102.12(Ventilation modes)	-	0	-
201.103.1.2(Instructions for use)	-	0	-
201.103.2(Pressure relief protection device)	-	0	-
201.103.3.1.1(AGSS inlet pressure)	-	0	-
201.103.3.1.2(Induced flow rate for active AGSS)	-	0	-
201.103.3.1.3(Flow resistance for active AGSS)	-	0	-
201.103.3.1.4(Spillage to atmosphere)	-	0	-
201.103.3.1.5(Leakage)	-	0	-
201.103.3.2.1(Pressure)	-	0	-
201.103.3.2.2(Induced flow rate for active AGSS)	-	0	-
201.103.4.1(Hose connectors)	-	0	-
201.103.4.2(Connections between parts of transfer systems and receiving systems)	-	0	-
201.103.4.3(Connections to diverting respiratory gas monitors)	-	0	-
201.103.5.1(Inlet)	-	0	-
201.103.6.1(Inlet connectors)	-	0	-
201.103.6.2(Outlet connectors)	-	0	-
201.103.6.3(Hoses)	-	0	-
201.103.6.4(Particle filter for active AGSS)	-	0	-
201.103.7(Transfer systems and receiving systems with integral power device for active AGSS)	-	0	-
201.103.8(Visual indicator for active AGSS)	-	0	-
201.104.1.1(Marking)	-	0	-
201.104.1.2(Instructions for use)	-	0	-
201.104.2.1(Controls)	-	0	-
201.104.2.2(Accuracy)	-	0	-
201.104.3(Vapour concentration during and after oxygen flush)	-	0	-
201.104.4(Connectors)	-	0	-
201.104.5(Cross-contamination)	-	0	-
201.104.6(Anaesthetic vapour delivery system filling)	-	0	-
201.105.1(Instructions for use)	-	0	-
201.105.2(Pressure limitation protection device)	-	0	-
201.105.2.1(Maximum limited pressure protection device)	-	0	-
201.105.2.2(Adjustable pressure limit protection device)	-	0	-
201.105.3(Activation of automatic ventilation)	-	0	-
201.105.4(Anaesthetic breathing system port connector)	-	0	-
201.105.5(Interruption of the electrical or pneumatic power supply)	-	0	-
201.105.6(Exhaust port connector)	-	0	-
201.105.7.1(Expiratory hold)	-	0	-
201.105.7.2(Inspiratory hold)	-	0	-
201.105.8(Subatmospheric pressure)	-	0	-
206.6.2.2.2(Primary operating functions)	-	0	-
208.5.2.2(Technical description)	-	0	-
208.6.8.3(Global indefinite alarm signal inactivation states)	-	0	-
208.6.8.4(Termination of inactivation of alarm signals)	-	0	-
208.6.12(Alarm system logging)	-	0	-
209(Requirements for environmentally conscious design)	-	0	-
210(Process requirements for the development of physiologic closed-loop controllers)	-	0	-
211(Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment)	-	0	-
212(Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment)	-	0	-
BB.2(Spark ignition tests)	-	0	-
BB.3(Surface temperature ignition tests)	-	0	-
201.C.1(Marking on the outside of ME equipment and ME systems or their parts)	-	0	-
201.C.3(Marking of controls and instruments)	-	0	-
201.C.4(Accompanying documents, general)	-	0	-
201.C.4(Accompanying documents, technical description)	-	0	-
201.4(General requirements)	-	0	-
201.5(General requirements for testing ME equipment)	-	0	-
201.6(Classification of ME equipment or ME systems)	-	0	-
201.7(ME equipment identification, marking and documents)	-	0	-
201.8(Protection against electrical hazards from ME equipment)	-	0	-
201.9(Protection against mechanical hazards of ME equipment and ME systems)	-	0	-
201.10(Protection against unwanted and excessive radiation hazards)	-	0	-
201.11(Protection against excessive temperatures and other hazards)	-	0	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	0	-
201.13(Hazardous situations and fault conditions)	-	0	-
201.14(Programmable electrical medical systems (PEMS))	-	0	-
201.15(Construction of ME equipment)	-	0	-
201.16(ME systems)	-	0	-
201.101(Additional requirements for anaesthetic gas delivery systems)	-	0	-
201.102(Additional requirements for an anaesthetic breathing system)	-	0	-
201.103(Additional requirements for an AGSS)	-	0	-
201.104(Additional requirements for interchangeable and non-interchangeable anaesthetic vapour delivery systems)	-	0	-
201.105(Additional requirements for an anaesthetic ventilator)	-	0	-
201.106(Display of pressure-volume loops)	-	0	-
201.107(Clinical evaluation)	-	0	-
206(Usability)	-	0	-
208(General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems)	-	0	-
201.4(General requirements)	-	0	-
201.4.4(Additional requirements for expected service life)	-	0	-
201.4.10(Power supply)	-	0	-
201.4.10.101(Requirements for pneumatic power input)	-	0	-
201.5.101.3(Gas flow rate and leakage specifications)	-	0	-
201.8.11.3(Power supply cords)	-	0	-
201.9.2.1(General)	-	0	-
201.9.2.101(Maintenance points)	-	0	-
201.9.2.102(Lighting)	-	0	-
201.9.2.103(Integrated seating)	-	0	-
201.9.2.104(Arrangement of control positions)	-	0	-
201.9.4(Instability hazards)	-	0	-
201.9.4.2.4.3(Movement over a threshold)	-	0	-
201.11.6.3(Spillage on ME equipment and ME systems)	-	0	-
201.11.6.8(Compatibility with substances used with the ME equipment)	-	0	-
201.11.8(Interruption of the power supply/supply mains to ME equipment)	-	0	-
201.11.8.102(Alarm condition for power supply failure)	-	0	-
201.11.8.103(Internal electrical power source)	-	0	-
201.11.101(Packaging systems for components intended to be sterilized)	-	0	-
201.12.4(Protection against hazardous output)	-	0	-
201.12.4.101(Accidental adjustment of operating controls)	-	0	-
201.12.4.102(Additional requirements for anaesthetic workstations)	-	0	-
201.12.4.103(Respiratory gas monitoring equipment)	-	0	-
201.12.4.103.1(Carbon dioxide monitoring equipment)	-	0	-
201.12.4.103.2(Oxygen monitoring equipment)	-	0	-
201.12.4.103.3(Anaesthetic agent monitoring equipment)	-	0	-
201.12.4.104(Exhaled volume monitoring equipment)	-	0	-
201.12.4.104.1(Accuracy)	-	0	-
201.12.4.104.2(Alarm conditions)	-	0	-
201.12.4.105(Anaesthetic breathing system integrity alarm condition)	-	0	-
201.12.4.106(Anaesthetic breathing system continuing-positive-pressure alarm condition)	-	0	-
201.12.4.107.1(Oxygen supply failure alarm system)	-	0	-
201.12.4.107.2(Oxygen supply failure protection device)	-	0	-
201.12.4.107.3(Hypoxic mixture delivery selection protection device)	-	0	-
201.12.4.108(Protection device for the workplace environment)	-	0	-
201.12.4.109(Protection device for the workplace environment)	-	0	-
201.13.101(Simultaneous failure)	-	0	-
201.14.6.1(Identification of known and foreseeable hazards)	-	0	-
201.14.101(Software life cycle processes)	-	0	-
201.15.3.5(Rough handling test)	-	0	-
201.15.101(Operator-detachable, flow-direction-sensitive parts and accessories)	-	0	-
201.16.9.2.1(Multiple socket-outlet)	-	0	-
201.16.101.1(General)	-	0	-
201.16.101.2(Connection to other equipment for network/data coupling)	-	0	-
201.16.101.3(Connection to distributed alarm system/information system)	-	0	-
201.101.1.1(Instructions for use)	-	0	-
201.101.1.2(Technical description)	-	0	-
201.101.2(Interruption of the electrical power supply)	-	0	-
201.101.3(Protection against cross-contamination of volatile anaesthetic agents)	-	0	-
201.101.4(Medical gas supply)	-	0	-
201.101.4.1.1(Inlet connector)	-	0	-
201.101.4.1.2(Inlet filtration)	-	0	-
201.101.4.1.3(Pressure regulators)	-	0	-
201.101.4.1.4(Reserve oxygen supply)	-	0	-
201.101.4.2.1(Inlet connector)	-	0	-
201.101.4.2.2(Inlet filtration)	-	0	-
201.101.4.2.3(Reverse flow and cross-flow protection device)	-	0	-
201.101.4.3(Pressure or content monitoring equipment)	-	0	-
201.101.5.1(Leakage prior to the flow rate adjustment control element)	-	0	-
201.101.5.2(Leakage after the flow rate adjustment control element)	-	0	-
201.101.6.1(Graduations and accuracy)	-	0	-
201.101.6.2(Flow rate adjustment control)	-	0	-
201.101.6.3(Carbon dioxide flow rate adjustment control)	-	0	-
201.101.7(Gas mixers)	-	0	-
201.101.8(Oxygen flush)	-	0	-
201.101.9(Fresh-gas outlet)	-	0	-
201.101.10(Interface to interchangeable anaesthetic vapour delivery systems)	-	0	-
201.102.1.1.1(Non-metallic parts)	-	0	-
201.102.1.1.2(Bag/ventilator control)	-	0	-
201.102.1.1.3(Absorbent bypass)	-	0	-
201.102.1.1.4(Inspiratory and expiratory ports of a circle absorber assembl)	-	0	-
201.102.1.2(Instructions for use)	-	0	-
201.102.2(Pressure limitation protection devices)	-	0	-
201.102.2.1(Maximum limited pressure protection device)	-	0	-
201.102.2.2(Adjustable pressure limit protection device)	-	0	-
201.102.3(Packaging of parts of anaesthetic breathing systems)	-	0	-
201.102.4(Electrical conductivity)	-	0	-
201.102.5.2(Exhaust port connector)	-	0	-
201.102.5.1(Patient connection port)	-	0	-
201.102.5.3.1(Arrangement and connector)	-	0	-
201.102.5.3.2(Marking)	-	0	-
201.102.5.3.3(Connectors of the reservoir bag connecting tube)	-	0	-
201.102.5.4(Anaesthetic ventilator port connector)	-	0	-
201.102.5.5(Anaesthetic breathing system port connector)	-	0	-
201.102.5.6(Inspiratory and expiratory port connectors of a circle absorber assembly)	-	0	-
201.102.5.7(Other port connectors)	-	0	-
201.102.6(Leakage)	-	0	-
201.102.7(Inspiratory and expiratory pressure/flow rate characteristics)	-	0	-
201.102.8.1(Y-piece)	-	0	-
201.102.8.2(Exhaust valve)	-	0	-
201.102.8.3(Breathing tubes)	-	0	-
201.102.9.1(Constructional requirements)	-	0	-
201.102.9.2(Absorbent bypass mechanism)	-	0	-
201.102.9.3(Resistance to flow rate)	-	0	-
201.102.10.2(Opening pressure)	-	0	-
201.102.10.3(Pressure flow-rate characteristics)	-	0	-
201.102.10.4(Reverse flow rate and dislocation)	-	0	-
201.102.11(Fresh-gas inlet)	-	0	-
201.102.12(Ventilation modes)	-	0	-
201.103.1.2(Instructions for use)	-	0	-
201.103.2(Pressure relief protection device)	-	0	-
201.103.3.1.1(AGSS inlet pressure)	-	0	-
201.103.3.1.2(Induced flow rate for active AGSS)	-	0	-
201.103.3.1.3(Flow resistance for active AGSS)	-	0	-
201.103.3.1.4(Spillage to atmosphere)	-	0	-
201.103.3.1.5(Leakage)	-	0	-
201.103.3.2.1(Pressure)	-	0	-
201.103.3.2.2(Induced flow rate for active AGSS)	-	0	-
201.103.4.1(Hose connectors)	-	0	-
201.103.4.2(Connections between parts of transfer systems and receiving systems)	-	0	-
201.103.4.3(Connections to diverting respiratory gas monitors)	-	0	-
201.103.5.1(Inlet)	-	0	-
201.103.6.1(Inlet connectors)	-	0	-
201.103.6.2(Outlet connectors)	-	0	-
201.103.6.3(Hoses)	-	0	-
201.103.6.4(Particle filter for active AGSS)	-	0	-
201.103.7(Transfer systems and receiving systems with integral power device for active AGSS)	-	0	-
201.103.8(Visual indicator for active AGSS)	-	0	-
201.104.1.1(Marking)	-	0	-
201.104.1.2(Instructions for use)	-	0	-
201.104.2.1(Controls)	-	0	-
201.104.2.2(Accuracy)	-	0	-
201.104.3(Vapour concentration during and after oxygen flush)	-	0	-
201.104.4(Connectors)	-	0	-
201.104.5(Cross-contamination)	-	0	-
201.104.6(Anaesthetic vapour delivery system filling)	-	0	-
201.105.1(Instructions for use)	-	0	-
201.105.2(Pressure limitation protection device)	-	0	-
201.105.2.1(Maximum limited pressure protection device)	-	0	-
201.105.2.2(Adjustable pressure limit protection device)	-	0	-
201.105.3(Activation of automatic ventilation)	-	0	-
201.105.4(Anaesthetic breathing system port connector)	-	0	-
201.105.5(Interruption of the electrical or pneumatic power supply)	-	0	-
201.105.6(Exhaust port connector)	-	0	-
201.105.7.1(Expiratory hold)	-	0	-
201.105.7.2(Inspiratory hold)	-	0	-
201.105.8(Subatmospheric pressure)	-	0	-
206.6.2.2.2(Primary operating functions)	-	0	-
208.5.2.2(Technical description)	-	0	-
208.6.8.3(Global indefinite alarm signal inactivation states)	-	0	-
208.6.8.4(Termination of inactivation of alarm signals)	-	0	-
208.6.12(Alarm system logging)	-	0	-
209(Requirements for environmentally conscious design)	-	0	-
210(Process requirements for the development of physiologic closed-loop controllers)	-	0	-
211(Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment)	-	0	-
212(Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment)	-	0	-
BB.2(Spark ignition tests)	-	0	-
BB.3(Surface temperature ignition tests)	-	0	-
201.C.1(Marking on the outside of ME equipment and ME systems or their parts)	-	0	-
201.C.3(Marking of controls and instruments)	-	0	-
201.C.4(Accompanying documents, general)	-	0	-
201.C.4(Accompanying documents, technical description)	-	0	-
201.4(General requirements)	-	0	-
201.5(General requirements for testing ME equipment)	-	0	-
201.6(Classification of ME equipment or ME systems)	-	0	-
201.7(ME equipment identification, marking and documents)	-	0	-
201.8(Protection against electrical hazards from ME equipment)	-	0	-
201.9(Protection against mechanical hazards of ME equipment and ME systems)	-	0	-
201.10(Protection against unwanted and excessive radiation hazards)	-	0	-
201.11(Protection against excessive temperatures and other hazards)	-	0	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	0	-
201.13(Hazardous situations and fault conditions)	-	0	-
201.14(Programmable electrical medical systems (PEMS))	-	0	-
201.15(Construction of ME equipment)	-	0	-
201.16(ME systems)	-	0	-
201.101(Additional requirements for anaesthetic gas delivery systems)	-	0	-
201.102(Additional requirements for an anaesthetic breathing system)	-	0	-
201.103(Additional requirements for an AGSS)	-	0	-
201.104(Additional requirements for interchangeable and non-interchangeable anaesthetic vapour delivery systems)	-	0	-
201.105(Additional requirements for an anaesthetic ventilator)	-	0	-
201.106(Display of pressure-volume loops)	-	0	-
201.107(Clinical evaluation)	-	0	-
206(Usability)	-	0	-
208(General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems)	-	0	-
201.4(General requirements)	-	0	-
201.4.4(Additional requirements for expected service life)	-	0	-
201.4.10(Power supply)	-	0	-
201.4.10.101(Requirements for pneumatic power input)	-	0	-
201.5.101.3(Gas flow rate and leakage specifications)	-	0	-
201.8.11.3(Power supply cords)	-	0	-
201.9.2.1(General)	-	0	-
201.9.2.101(Maintenance points)	-	0	-
201.9.2.102(Lighting)	-	0	-
201.9.2.103(Integrated seating)	-	0	-
201.9.2.104(Arrangement of control positions)	-	0	-
201.9.4(Instability hazards)	-	0	-
201.9.4.2.4.3(Movement over a threshold)	-	0	-
201.11.6.3(Spillage on ME equipment and ME systems)	-	0	-
201.11.6.8(Compatibility with substances used with the ME equipment)	-	0	-
201.11.8(Interruption of the power supply/supply mains to ME equipment)	-	0	-
201.11.8.102(Alarm condition for power supply failure)	-	0	-
201.11.8.103(Internal electrical power source)	-	0	-
201.11.101(Packaging systems for components intended to be sterilized)	-	0	-
201.12.4(Protection against hazardous output)	-	0	-
201.12.4.101(Accidental adjustment of operating controls)	-	0	-
201.12.4.102(Additional requirements for anaesthetic workstations)	-	0	-
201.12.4.103(Respiratory gas monitoring equipment)	-	0	-
201.12.4.103.1(Carbon dioxide monitoring equipment)	-	0	-
201.12.4.103.2(Oxygen monitoring equipment)	-	0	-
201.12.4.103.3(Anaesthetic agent monitoring equipment)	-	0	-
201.12.4.104(Exhaled volume monitoring equipment)	-	0	-
201.12.4.104.1(Accuracy)	-	0	-
201.12.4.104.2(Alarm conditions)	-	0	-
201.12.4.105(Anaesthetic breathing system integrity alarm condition)	-	0	-
201.12.4.106(Anaesthetic breathing system continuing-positive-pressure alarm condition)	-	0	-
201.12.4.107.1(Oxygen supply failure alarm system)	-	0	-
201.12.4.107.2(Oxygen supply failure protection device)	-	0	-
201.12.4.107.3(Hypoxic mixture delivery selection protection device)	-	0	-
201.12.4.108(Protection device for the workplace environment)	-	0	-
201.12.4.109(Protection device for the workplace environment)	-	0	-
201.13.101(Simultaneous failure)	-	0	-
201.14.6.1(Identification of known and foreseeable hazards)	-	0	-
201.14.101(Software life cycle processes)	-	0	-
201.15.3.5(Rough handling test)	-	0	-
201.15.101(Operator-detachable, flow-direction-sensitive parts and accessories)	-	0	-
201.16.9.2.1(Multiple socket-outlet)	-	0	-
201.16.101.1(General)	-	0	-
201.16.101.2(Connection to other equipment for network/data coupling)	-	0	-
201.16.101.3(Connection to distributed alarm system/information system)	-	0	-
201.101.1.1(Instructions for use)	-	0	-
201.101.1.2(Technical description)	-	0	-
201.101.2(Interruption of the electrical power supply)	-	0	-
201.101.3(Protection against cross-contamination of volatile anaesthetic agents)	-	0	-
201.101.4(Medical gas supply)	-	0	-
201.101.4.1.1(Inlet connector)	-	0	-
201.101.4.1.2(Inlet filtration)	-	0	-
201.101.4.1.3(Pressure regulators)	-	0	-
201.101.4.1.4(Reserve oxygen supply)	-	0	-
201.101.4.2.1(Inlet connector)	-	0	-
201.101.4.2.2(Inlet filtration)	-	0	-
201.101.4.2.3(Reverse flow and cross-flow protection device)	-	0	-
201.101.4.3(Pressure or content monitoring equipment)	-	0	-
201.101.5.1(Leakage prior to the flow rate adjustment control element)	-	0	-
201.101.5.2(Leakage after the flow rate adjustment control element)	-	0	-
201.101.6.1(Graduations and accuracy)	-	0	-
201.101.6.2(Flow rate adjustment control)	-	0	-
201.101.6.3(Carbon dioxide flow rate adjustment control)	-	0	-
201.101.7(Gas mixers)	-	0	-
201.101.8(Oxygen flush)	-	0	-
201.101.9(Fresh-gas outlet)	-	0	-
201.101.10(Interface to interchangeable anaesthetic vapour delivery systems)	-	0	-
201.102.1.1.1(Non-metallic parts)	-	0	-
201.102.1.1.2(Bag/ventilator control)	-	0	-
201.102.1.1.3(Absorbent bypass)	-	0	-
201.102.1.1.4(Inspiratory and expiratory ports of a circle absorber assembl)	-	0	-
201.102.1.2(Instructions for use)	-	0	-
201.102.2(Pressure limitation protection devices)	-	0	-
201.102.2.1(Maximum limited pressure protection device)	-	0	-
201.102.2.2(Adjustable pressure limit protection device)	-	0	-
201.102.3(Packaging of parts of anaesthetic breathing systems)	-	0	-
201.102.4(Electrical conductivity)	-	0	-
201.102.5.2(Exhaust port connector)	-	0	-
201.102.5.1(Patient connection port)	-	0	-
201.102.5.3.1(Arrangement and connector)	-	0	-
201.102.5.3.2(Marking)	-	0	-
201.102.5.3.3(Connectors of the reservoir bag connecting tube)	-	0	-
201.102.5.4(Anaesthetic ventilator port connector)	-	0	-
201.102.5.5(Anaesthetic breathing system port connector)	-	0	-
201.102.5.6(Inspiratory and expiratory port connectors of a circle absorber assembly)	-	0	-
201.102.5.7(Other port connectors)	-	0	-
201.102.6(Leakage)	-	0	-
201.102.7(Inspiratory and expiratory pressure/flow rate characteristics)	-	0	-
201.102.8.1(Y-piece)	-	0	-
201.102.8.2(Exhaust valve)	-	0	-
201.102.8.3(Breathing tubes)	-	0	-
201.102.9.1(Constructional requirements)	-	0	-
201.102.9.2(Absorbent bypass mechanism)	-	0	-
201.102.9.3(Resistance to flow rate)	-	0	-
201.102.10.2(Opening pressure)	-	0	-
201.102.10.3(Pressure flow-rate characteristics)	-	0	-
201.102.10.4(Reverse flow rate and dislocation)	-	0	-
201.102.11(Fresh-gas inlet)	-	0	-
201.102.12(Ventilation modes)	-	0	-
201.103.1.2(Instructions for use)	-	0	-
201.103.2(Pressure relief protection device)	-	0	-
201.103.3.1.1(AGSS inlet pressure)	-	0	-
201.103.3.1.2(Induced flow rate for active AGSS)	-	0	-
201.103.3.1.3(Flow resistance for active AGSS)	-	0	-
201.103.3.1.4(Spillage to atmosphere)	-	0	-
201.103.3.1.5(Leakage)	-	0.01	-
201.103.3.2.1(Pressure)	-	0	-
201.103.3.2.2(Induced flow rate for active AGSS)	-	0	-
201.103.4.1(Hose connectors)	-	0	-
201.103.4.2(Connections between parts of transfer systems and receiving systems)	-	0	-
201.103.4.3(Connections to diverting respiratory gas monitors)	-	0	-
201.103.5.1(Inlet)	-	0	-
201.103.6.1(Inlet connectors)	-	0	-
201.103.6.2(Outlet connectors)	-	0	-
201.103.6.3(Hoses)	-	0	-
201.103.6.4(Particle filter for active AGSS)	-	0	-
201.103.7(Transfer systems and receiving systems with integral power device for active AGSS)	-	0	-
201.103.8(Visual indicator for active AGSS)	-	0	-
201.104.1.1(Marking)	-	0	-
201.104.1.2(Instructions for use)	-	0	-
201.104.2.1(Controls)	-	0	-
201.104.2.2(Accuracy)	-	0	-
201.104.3(Vapour concentration during and after oxygen flush)	-	0	-
201.104.4(Connectors)	-	0	-
201.104.5(Cross-contamination)	-	0	-
201.104.6(Anaesthetic vapour delivery system filling)	-	0	-
201.105.1(Instructions for use)	-	0	-
201.105.2(Pressure limitation protection device)	-	0	-
201.105.2.1(Maximum limited pressure protection device)	-	0	-
201.105.2.2(Adjustable pressure limit protection device)	-	0	-
201.105.3(Activation of automatic ventilation)	-	0	-
201.105.4(Anaesthetic breathing system port connector)	-	0	-
201.105.5(Interruption of the electrical or pneumatic power supply)	-	0	-
201.105.6(Exhaust port connector)	-	0	-
201.105.7.1(Expiratory hold)	-	0	-
201.105.7.2(Inspiratory hold)	-	0	-
201.105.8(Subatmospheric pressure)	-	0	-
206.6.2.2.2(Primary operating functions)	-	0	-
208.5.2.2(Technical description)	-	0	-
208.6.8.3(Global indefinite alarm signal inactivation states)	-	0	-
208.6.8.4(Termination of inactivation of alarm signals)	-	0	-
208.6.12(Alarm system logging)	-	0	-
209(Requirements for environmentally conscious design)	-	0	-
210(Process requirements for the development of physiologic closed-loop controllers)	-	0	-
211(Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment)	-	0	-
212(Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment)	-	0	-
BB.2(Spark ignition tests)	-	0	-
BB.3(Surface temperature ignition tests)	-	0	-
201.C.1(Marking on the outside of ME equipment and ME systems or their parts)	-	0	-
201.C.3(Marking of controls and instruments)	-	0	-
201.C.4(Accompanying documents, general)	-	0	-
201.C.4(Accompanying documents, technical description)	-	0	-

05 Nov, 2029

-
Included w.e.f.17.03.2025 Exclusion Cl 201.17 (Electromagnetic compatibility of ME equipment and ME systems) Cl 202 (Electromagnetic disturbances — Requirements and tests)

8387

Astute Labs Pvt Ltd, Pune

7174321

IS 13450 : PART 2 : SEC 24 (2019)

Medical electrical equipment: Part 2 particular requirements for the basic safety and essential performance: Sec 24 infusion pumps and controllers (First Revision)

800000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
201.4(General requirements)	-	50000	-
201.5(General requirements for testing of ME EQUIPMENT)	-	50000	-
201.6(Classification of ME EQUIPMENT and ME SYSTEM)	-	40000	-
201.7(ME EQUIPMENT identification, marking and documents)	-	40000	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	70000	-
201.9(Protection against MECHANICAL HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	70000	-
201.1(Protection against unwanted and excessive radiation HAZARDS)	-	40000	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	50000	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	100000	-
201.13(HAZARDOUS SITUATIONS and fault conditions)	-	50000	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS))	-	30000	-
201.15(Construction of ME EQUIPMENT)	-	60000	-
201.16(ME SYSTEMS)	-	50000	-
206(Usability)	-	50000	-
208(General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems)	-	50000	-
201.4(General requirements)	-	0	-
201.5(General requirements for testing of ME EQUIPMENT)	-	0	-
201.6(Classification of ME EQUIPMENT and ME SYSTEM)	-	0	-
201.7(ME EQUIPMENT identification, marking and documents)	-	0	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	0	-
201.9(Protection against MECHANICAL HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	0	-
201.1(Protection against unwanted and excessive radiation HAZARDS)	-	0	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	0	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	0	-
201.13(HAZARDOUS SITUATIONS and fault conditions)	-	0	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS))	-	0	-
201.15(Construction of ME EQUIPMENT)	-	0	-
201.16(ME SYSTEMS)	-	0	-
206(Usability)	-	0	-
208(General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems)	-	0	-
201.4(General requirements)	-	0	-
201.5(General requirements for testing of ME EQUIPMENT)	-	0	-
201.6(Classification of ME EQUIPMENT and ME SYSTEM)	-	0	-
201.7(ME EQUIPMENT identification, marking and documents)	-	0	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	0	-
201.9(Protection against MECHANICAL HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	0	-
201.1(Protection against unwanted and excessive radiation HAZARDS)	-	0	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	0	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	0	-
201.13(HAZARDOUS SITUATIONS and fault conditions)	-	0	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS))	-	0	-
201.15(Construction of ME EQUIPMENT)	-	0	-
201.16(ME SYSTEMS)	-	0	-
206(Usability)	-	0	-
208(General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems)	-	0	-

05 Nov, 2029

-
Included w.e.f.09.04.2025 Exclusion Cl 201.17 (Electromagnetic compatibility of ME equipment and ME systems) Cl 202 (Electromagnetic compatibility-Requirement and tests)

8388

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY - CIPET, HALDIA

5116334

IS 7834 : Part 6 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 6 Specific requirements for sockets

All Sizes

6563 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
table 1 sl.no: 01(16 )	-	0	-
table 1 sl.no: 02(20 )	-	0	-
table 1 sl.no: 03(25 )	-	0	-
table 1 sl.no: 04(32 )	-	0	-
table 1 sl.no: 05(40 )	-	0	-
table 1 sl.no: 06(50 )	-	0	-
table 1 sl.no: 07(63 )	-	0	-
table 1 sl.no: 08(75 )	-	0	-
table 1 sl.no: 09(90 )	-	0	-
table 1 sl.no: 10(110 )	-	0	-
table 1 sl.no: 11(125 )	-	0	-
table 1 sl.no: 12(140 )	-	0	-
table 1 sl.no: 13(160 )	-	0	-
table 1 sl.no: 14( 180 )	-	0	-
table 1 sl.no: 15(200 )	-	0	-
table 1 sl.no: 16(225 )	-	0	-
table 1 sl.no: 17(250.0)	-	0	-
table 1 sl.no: 18(280.0)	-	0	-
table 1 sl.no: 19(315.0)	-	0	-
2.1(General)	-	5249.99	(Test charges 5250) Discount of 25 % is applicable on total test charges only for BIS. 1. Opacity = 700 2. HPT = 850 3. Effect on water = 3000 4. Stress relief test =700
2.2(Manufacture)	-	0	-
2.2.2, Table 1(Socket Laying Length)	-	0	-
2.2.3(Socket length)	-	500	Discount of 25 % is applicable on total test charges only for BIS.
2.1(General)	-	0	-
2.2(Manufacture)	-	0	-
2.2.2, Table 1(Size)	-	0	-
2.2.2, Table 1(Socket Laying Length)	-	0	-
2.2.3( inside diameter of the socket)	-	0	-
6.1.1(VCM Content Test)	-	3000	Discount of 25 % is applicable on total test charges only for BIS.
2.2.2 table 1(Laying length)	-	0	-
2.2.2, Table 1(Size)	-	0	-
2.2.3( inside diameter of the socket)	-	0	-
2.2.3(Socket length)	-	0	-

14 Dec, 2027

-
Included w.e.f.03.12.2024

8389

DELHI TEST HOUSE, Azadhpur

8131406

IS 1660 (2024)

Wrought and Cast Aluminium Utensils Specification ( Second Revision )

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6(Shape and Dimensions)	-	1000	COMPLETE TESTING - 35000/-
Cl-7.1(Handles, when fitted)	-	500	COMPLETE TESTING - 35000/-
Cl-7.2(Handles)	-	500	COMPLETE TESTING - 35000/-
Cl-8(Workmanship and Finish)	-	500	COMPLETE TESTING - 35000/-
Cl-8.3(Utensils, if anodized, fully or partially)	-	1000	COMPLETE TESTING - 35000/-
Cl-8.3(Minimum nominal thickness)	-	1000	COMPLETE TESTING - 35000/-
Cl-8.3(Thickness of hard anodized)	-	1000	COMPLETE TESTING - 35000/-
Cl-8.3(Finish and appearance of hard anodized)	-	500	COMPLETE TESTING - 35000/-
Cl-8.3(Abrasion resistance of hard anodized)	-	500	COMPLETE TESTING - 35000/-
Cl-8.3(Colour of hard anodized)	-	500	COMPLETE TESTING - 35000/-
Cl-8.3(Hardness of hard anodized)	-	500	COMPLETE TESTING - 35000/-
Cl-8.5(Non-stick unreinforced PTFE)	-	2500	COMPLETE TESTING - 35000/-
Cl-8.6(Ceramic coating)	-	2500	COMPLETE TESTING - 35000/-
Cl-8.7(The thickness test, adhesion test)	-	1000	COMPLETE TESTING - 35000/-
Cl-8.7(Minimum thickness of coating)	-	500	COMPLETE TESTING - 35000/-
Cl-8.7.1(Dry heat the cookware)	-	500	COMPLETE TESTING - 35000/-
Cl-8.9(Test for Induction compatible base)	-	10000	COMPLETE TESTING - 35000/-
Cl-8.10.1(Tests for Lunch Boxes- Performance Test)	-	5000	COMPLETE TESTING - 35000/-
Cl-8.10.1(Tests for Lunch Boxes- Performance Test)	-	5000	COMPLETE TESTING - 35000/-
Cl-8.10.2(Tests for Lunch Boxes- Ground Nut Oil Test for Leakage)	-	5000	COMPLETE TESTING - 35000/-
Cl-8.11.1(Test(s) on Tempered Glass Lid- Fragmentation Test)	-	2500	COMPLETE TESTING - 35000/-
Cl-8.11.2(Test(s) on Tempered Glass Lid-Ball Drop Test)	-	1000	COMPLETE TESTING - 35000/-
Cl-8.11.3(Test(s) on Tempered Glass Lid- Thermal Shock Test)	-	1000	COMPLETE TESTING - 35000/-
Cl-8.11.4(Test(s) on Tempered Glass Lid- Free Fall Test)	-	500	COMPLETE TESTING - 35000/-
Cl-9.1(Normal Capacity)	-	250	COMPLETE TESTING - 35000/-
Cl-9.2(Normal Capacity of internal diameter)	-	200	COMPLETE TESTING - 35000/-
Cl-7.3 (Cl- 4.1 of IS 13395)(Construction)	-	500	COMPLETE TESTING - 35000/-
Cl-7.3 (Cl- 4.2 of IS 13395)(Materials)	-	500	COMPLETE TESTING - 35000/-
Cl-7.3 (Cl- 4.3 of IS 13395)(Selection and Size)	-	500	COMPLETE TESTING - 35000/-
Cl-7.3 (Cl- 4.4 of IS 13395)(Position of Handle and Knob with Respect to Cookware)	-	500	COMPLETE TESTING - 35000/-
Cl-7.3 (Cl- 4.5 of IS 13395)(Attachment to Cookware)	-	1000	COMPLETE TESTING - 35000/-
Cl-7.3 (Cl- 5.2 of IS 13395)(Bending Strength)	-	1000	COMPLETE TESTING - 35000/-
Cl-7.3 (Cl- 5.3 of IS 13395)(Torque Strength)	-	1000	COMPLETE TESTING - 35000/-
Cl-7.3 (Cl- 5.4 of IS 13395)(Impact Strength)	-	1000	COMPLETE TESTING - 35000/-
Cl-7.3 (Cl- 5.5 of IS 13395)(Fatigue Resistance)	-	2000	COMPLETE TESTING - 35000/-
Cl-7.3 (Cl- 5.6 of IS 13395)(Leakage)	-	1000	COMPLETE TESTING - 35000/-
Cl-7.3 (Cl- 5.7 of IS 13395)(Thermal Insulation)	-	1000	COMPLETE TESTING - 35000/-
Wrought and Cast Aluminium Utensils — Specification(Heat Resistance)	-	500	COMPLETE TESTING - 35000/-
Cl-7.3 (Cl- 5.9 of IS 13395)(Washing Resistance (Type Test))	-	1000	COMPLETE TESTING - 35000/-
Cl-7.3 (Cl- 5.10 of IS 13395)(Burning Resistance)	-	1000	COMPLETE TESTING - 35000/-
Cl-4.1(Main body of utensil)	-	10000	COMPLETE TESTING - 35000/-
Cl-4.1(Cast cookware)	-	10000	COMPLETE TESTING - 35000/-
Cl-4.1(Other aluminum components and parts)	-	15000	COMPLETE TESTING - 35000/-
Cl-4.1.1(Lids (material))	-	5000	COMPLETE TESTING - 35000/-
Cl-4.1.1(Minimum thickness of lid)	-	500	COMPLETE TESTING - 35000/-
Cl-4.1.2(Minimum thickness of glass)	-	500	COMPLETE TESTING - 35000/-
Cl-4.1.2(Material of rim)	-	2500	COMPLETE TESTING - 35000/-
Cl-4.1.2(Minimum thickness of rim)	-	500	COMPLETE TESTING - 35000/-
Cl-4.2(Material of strips)	-	5000	COMPLETE TESTING - 35000/-
Cl-4.2(Stainless steel handles, rivets and fittings)	-	10000	COMPLETE TESTING - 35000/-
Cl-4.3(Clips of lunch box)	-	2000	COMPLETE TESTING - 35000/-
Cl-4.3(Clips of lunch box)	-	2000	COMPLETE TESTING - 35000/-
Cl-4.3(Rivets used in lunch box)	-	2500	COMPLETE TESTING - 35000/-
Cl-4.4(Screws, studs/nuts, and locking loop)	-	2500	COMPLETE TESTING - 35000/-
Cl-4.5(Rivets for fixing of handles)	-	2500	COMPLETE TESTING - 35000/-
Cl-4.5(Material of cap)	-	2500	COMPLETE TESTING - 35000/-
Cl-4.6(Strips used for flame guards)	-	2500	COMPLETE TESTING - 35000/-
Cl-4.6(stainless steel)	-	3500	COMPLETE TESTING - 35000/-
Cl-5(Fabrication)	-	500	COMPLETE TESTING - 35000/-
Cl-3.1.1, 3.1.2(Minimum Thickness of Sheet)	-	250	COMPLETE TESTING - 35000/-
Cl-3.1.3, Table-2(Minimum Thickness at the Bottom)	-	250	COMPLETE TESTING - 35000/-
Cl-3.1.3, Table-2(Minimium Thickness of Wall at the Top Edge)	-	250	COMPLETE TESTING - 35000/-
Cl-3.1.3, Table-2(Minimum Cover Thickness)	-	250	COMPLETE TESTING - 35000/-
Cl-8.8(Requirements of PTFE)	-	5000	COMPLETE TESTING - 35000/-
Wrought and Cast Aluminium Utensils — Specification(Lid of the cookware)	-	0	COMPLETE TESTING - 35000/-
Cl-8.9(Material for induction plate)	-	7500	COMPLETE TESTING - 35000/-
Cl-6(Shape and Dimensions)	-	0	COMPLETE TESTING - 35000/-
Cl-7.1(Handles, when fitted)	-	0	COMPLETE TESTING - 35000/-
Cl-7.2(Handles)	-	0	COMPLETE TESTING - 35000/-
Cl-8(Workmanship and Finish)	-	0	COMPLETE TESTING - 35000/-
Cl-8.3(Utensils, if anodized, fully or partially)	-	0	COMPLETE TESTING - 35000/-
Cl-8.3(Minimum nominal thickness)	-	0	COMPLETE TESTING - 35000/-
Cl-8.3(Thickness of hard anodized)	-	0	COMPLETE TESTING - 35000/-
Cl-8.3(Finish and appearance of hard anodized)	-	0	COMPLETE TESTING - 35000/-
Cl-8.3(Abrasion resistance of hard anodized)	-	0	COMPLETE TESTING - 35000/-
Cl-8.3(Colour of hard anodized)	-	0	COMPLETE TESTING - 35000/-
Cl-8.3(Hardness of hard anodized)	-	0	COMPLETE TESTING - 35000/-
Cl-8.5(Non-stick unreinforced PTFE)	-	0	COMPLETE TESTING - 35000/-
Cl-8.6(Ceramic coating)	-	0	COMPLETE TESTING - 35000/-
Cl-8.7(The thickness test, adhesion test)	-	0	COMPLETE TESTING - 35000/-
Cl-8.7(Minimum thickness of coating)	-	0	COMPLETE TESTING - 35000/-
Cl-8.7.1(Dry heat the cookware)	-	0	COMPLETE TESTING - 35000/-
Cl-8.9(Test for Induction compatible base)	-	0	COMPLETE TESTING - 35000/-
Cl-8.10.1(Tests for Lunch Boxes- Performance Test)	-	0	COMPLETE TESTING - 35000/-
Cl-8.10.1(Tests for Lunch Boxes- Performance Test)	-	0	COMPLETE TESTING - 35000/-
Cl-8.10.2(Tests for Lunch Boxes- Ground Nut Oil Test for Leakage)	-	0	COMPLETE TESTING - 35000/-
Cl-8.11.1(Test(s) on Tempered Glass Lid- Fragmentation Test)	-	0	COMPLETE TESTING - 35000/-
Cl-8.11.2(Test(s) on Tempered Glass Lid-Ball Drop Test)	-	0	COMPLETE TESTING - 35000/-
Cl-8.11.3(Test(s) on Tempered Glass Lid- Thermal Shock Test)	-	0	COMPLETE TESTING - 35000/-
Cl-8.11.4(Test(s) on Tempered Glass Lid- Free Fall Test)	-	0	COMPLETE TESTING - 35000/-
Cl-9.1(Normal Capacity)	-	0	COMPLETE TESTING - 35000/-
Cl-9.2(Normal Capacity of internal diameter)	-	0	COMPLETE TESTING - 35000/-
Cl-7.3 (Cl- 4.1 of IS 13395)(Construction)	-	0	COMPLETE TESTING - 35000/-
Cl-7.3 (Cl- 4.2 of IS 13395)(Materials)	-	0	COMPLETE TESTING - 35000/-
Cl-7.3 (Cl- 4.3 of IS 13395)(Selection and Size)	-	0	COMPLETE TESTING - 35000/-
Cl-7.3 (Cl- 4.4 of IS 13395)(Position of Handle and Knob with Respect to Cookware)	-	0	COMPLETE TESTING - 35000/-
Cl-7.3 (Cl- 4.5 of IS 13395)(Attachment to Cookware)	-	0	COMPLETE TESTING - 35000/-
Cl-7.3 (Cl- 5.2 of IS 13395)(Bending Strength)	-	0	COMPLETE TESTING - 35000/-
Cl-7.3 (Cl- 5.3 of IS 13395)(Torque Strength)	-	0	COMPLETE TESTING - 35000/-
Cl-7.3 (Cl- 5.4 of IS 13395)(Impact Strength)	-	0	COMPLETE TESTING - 35000/-
Cl-7.3 (Cl- 5.5 of IS 13395)(Fatigue Resistance)	-	0	COMPLETE TESTING - 35000/-
Cl-7.3 (Cl- 5.6 of IS 13395)(Leakage)	-	0	COMPLETE TESTING - 35000/-
Cl-7.3 (Cl- 5.7 of IS 13395)(Thermal Insulation)	-	0	COMPLETE TESTING - 35000/-
Wrought and Cast Aluminium Utensils — Specification(Heat Resistance)	-	0	COMPLETE TESTING - 35000/-
Cl-7.3 (Cl- 5.9 of IS 13395)(Washing Resistance (Type Test))	-	0	COMPLETE TESTING - 35000/-
Cl-7.3 (Cl- 5.10 of IS 13395)(Burning Resistance)	-	0	COMPLETE TESTING - 35000/-
Cl-4.1(Main body of utensil)	-	0	COMPLETE TESTING - 35000/-
Cl-4.1(Cast cookware)	-	0	COMPLETE TESTING - 35000/-
Cl-4.1(Other aluminum components and parts)	-	0	COMPLETE TESTING - 35000/-
Cl-4.1.1(Lids (material))	-	0	COMPLETE TESTING - 35000/-
Cl-4.1.1(Minimum thickness of lid)	-	0	COMPLETE TESTING - 35000/-
Cl-4.1.2(Minimum thickness of glass)	-	0	COMPLETE TESTING - 35000/-
Cl-4.1.2(Material of rim)	-	0	COMPLETE TESTING - 35000/-
Cl-4.1.2(Minimum thickness of rim)	-	0	COMPLETE TESTING - 35000/-
Cl-4.2(Material of strips)	-	0	COMPLETE TESTING - 35000/-
Cl-4.2(Stainless steel handles, rivets and fittings)	-	0	COMPLETE TESTING - 35000/-
Cl-4.3(Clips of lunch box)	-	0	COMPLETE TESTING - 35000/-
Cl-4.3(Clips of lunch box)	-	0	COMPLETE TESTING - 35000/-
Cl-4.3(Rivets used in lunch box)	-	0	COMPLETE TESTING - 35000/-
Cl-4.4(Screws, studs/nuts, and locking loop)	-	0	COMPLETE TESTING - 35000/-
Cl-4.5(Rivets for fixing of handles)	-	0	COMPLETE TESTING - 35000/-
Cl-4.5(Material of cap)	-	0	COMPLETE TESTING - 35000/-
Cl-4.6(Strips used for flame guards)	-	0	COMPLETE TESTING - 35000/-
Cl-4.6(stainless steel)	-	0	COMPLETE TESTING - 35000/-
Cl-5(Fabrication)	-	0	COMPLETE TESTING - 35000/-
Cl-3.1.1, 3.1.2(Minimum Thickness of Sheet)	-	0	COMPLETE TESTING - 35000/-
Cl-3.1.3, Table-2(Minimum Thickness at the Bottom)	-	0	COMPLETE TESTING - 35000/-
Cl-3.1.3, Table-2(Minimium Thickness of Wall at the Top Edge)	-	0	COMPLETE TESTING - 35000/-
Cl-3.1.3, Table-2(Minimum Cover Thickness)	-	0	COMPLETE TESTING - 35000/-
Cl-8.8(Requirements of PTFE)	-	0	COMPLETE TESTING - 35000/-
Wrought and Cast Aluminium Utensils — Specification(Lid of the cookware)	-	0	COMPLETE TESTING - 35000/-
Cl-8.9(Material for induction plate)	-	0	COMPLETE TESTING - 35000/-

17 Jun, 2027

-
Included.w.e.f.23.12.2024

8390

International Testing Centre, MSME Technology Development Centre, Meerut

8177804

IS 15298 : part 4 (2024)

Personal Protective Equipment Part 4 Occupational Footwear (ISO 20347 : 2021, MOD) (Third Revision)

44500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.2(Design)	-	300	-
Cl 5.2.2(" Height of upper ")	-	300	-
Cl 5.2.3(Heel area)	-	300	-
Cl 5.3.1.1(Construction of whole footwear)	-	300	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	500	-
Cl 5.3.2(Leak proofness)	-	500	-
Cl 5.3.3(Specific ergonomic features)	-	500	-
Cl 5.3.4.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	1500	-
Cl 5.3.5, Table no 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	3000	-
Cl 5.3.5, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3500	-
Cl 5.3.5, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3500	-
Cl 5.3.5, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	2000	-
Cl 5.3.5, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	2000	-
Cl 5.3.5, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	2000	-
Cl 5.3.5, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	3500	-
Cl 5.3.5, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	3000	-
Cl 5.3.5, Table no 1 of IS 17011 (x)(pH)	-	500	-
Cl 5.3.5, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	4500	-
Cl 5.3.5, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	2000	-
Cl 5.3.6(Seam strength)	-	500	-
Cl 5.3.7(Lead Content ( National Annex A))	-	2000	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	300	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	300	-
Cl 5.4.3(Tear strength)	-	500	-
Cl 5.4.4, Table 9(Tensile properties- Tensile strength)	-	500	-
Cl 5.4.4, Table 9(Tensile properties- Breaking Force)	-	500	-
Cl 5.4.4, Table 9(Tensile properties-Modulus at 100 % elongation)	-	500	-
Cl 5.4.4, Table 9(Tensile properties- Elongation at break)	-	500	-
Cl 5.4.5(Flexing resistance)	-	800	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	800	-
Cl 5.4.7(Resistance to hydrolysis)	-	1500	-
Cl 5.5.2(Lining- Tear strength)	-	500	-
Cl 5.5.3(Lining- Abrasion resistance)	-	800	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	800	-
Cl 5.6.2(Tear strength of tongue)	-	500	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	300	-
Cl 5.7.2(Water permeability of insock)	-	800	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	800	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	800	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	800	-
Cl 5.8.2.1(Thickness of Outsole)	-	300	-
Cl 5.8.2.2(Cleated area)	-	300	-
Cl 5.8.2.3(Cleat height)	-	300	-
Cl 5.8.3(Outsole- Tear strength)	-	500	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	800	-
Cl 5.8.5(Outsole-Flexing resistance)	-	800	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	1500	-
Cl 5.8.7(Interlayer bond strength)	-	500	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	500	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	500	-
Cl 6.2.1.1.4(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	500	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	300	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	300	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	800	-
Cl 6.2.1.4.2.1(ISO 20344:2021, 5.11.2)	-	500	-
Cl 6.2.1.4.2.2(ISO 20344:2021, 5.6.2.1)	-	500	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	1500	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	1500	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	1500	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	1000	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	1500	-
Cl 6.2.4(Energy absorption of seat region)	-	500	-
Cl 6.2.5(Water resistance)	-	800	-
Cl 6.2.6(Ankle protection)	-	500	-
Cl 6.2.7.1(Cut resistance footwear- design)	-	1000	-
Cl 6.2.7.2(Dimensions and construction of protective area of Cut resistance footwear)	-	300	-
Cl 6.2.7.3(Resistance to cutting)	-	800	-
Cl 6.2.8(Scuff cap)	-	500	-
Cl 6.2.9("Slip resistance on ceramic tile floor with glycerine ")	-	1500	-
Cl 6.3(Upper — Water penetration and absorption)	-	800	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	800	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	500	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	500	-
Cl 6.4.3.2(Design of Ladder grip)	-	500	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	500	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	500	-
Cl 7("Marking ")	-	300	-
Cl 5.4.2(Thickness)	-	300	-

15 Apr, 2027

-
Included w.e.f.04.12.2024

8391

Astute Labs Pvt Ltd, Pune

7174321

IS 13450 : Part 2 : Sec 25 (2018)

Medical Electrical Equipment Part 2 Particular Requirements for the Basic Safety and Essential Performance Section 25 Electrocardiographs

320000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
201.4(Power and Current)	-	20000	-
201.5(Temperature, Humidity, Dimensions, Force)	-	20000	-
201.7.4.101(Qualitative)	-	0	-
201.8(Current, Voltage, Energy, Dimensions, Impedance)	-	40000	-
201.8.5.5.1(Voltage, Time)	-	0	-
201.8.5.5.2(Energy)	-	0	-
201.9(Mechanical dimensions, strength , torque, force)	-	20000	-
201.11(Temperature)	-	30000	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	45000	-
201.12.1.101.1(Automated measurements on ECGS)	-	0	-
201.12.1.101.2(Requirements for amplitude measurements)	-	0	-
201.12.1.101.3(Requirements for interval measurements)	-	0	-
201.12.1.101.3.1(* Requirements for absolute interval and wave duration measurements)	-	0	-
201.12.1.101.3.2()	-	0	-
201.12.4(Protection against hazardous output)	-	0	-
201.12.4.101(Indication of inoperable ELECTROCARDIOGRAPH)	-	0	-
201.12.4.102(ECG signals)	-	0	-
201.12.4.102.1(ECG signals)	-	0	-
201.12.4.102.2(Minimum required configuration)	-	0	-
201.12.4.102.3(ECG signals)	-	0	-
201.12.4.102.3.1(General)	-	0	-
201.12.4.102.3.2(Goldberger and Wilson LEADS)	-	0	-
201.12.4.102.4(Recovery time)	-	0	-
201.12.4.103(Input impedance)	-	0	-
201.12.4.104(Required GAINS)	-	0	-
201.12.4.105.2(Overload tolerance)	-	0	-
201.12.4.105.3(FILTERS (including line frequency interference FILTERS))	-	0	-
201.12.4.106.1(Noise level)	-	0	-
201.12.4.106.2(CHANNEL crosstalk)	-	0	-
201.12.4.107.1.1.1(High Frequency Response)	-	0	-
201.12.4.107.1.1.2(Low frequency (impulse) response)	-	0	-
201.12.4.107.1.2(Test with calibration ECG)	-	0	-
201.12.4.107.2(Linearity and Dynamic range)	-	0	-
201.12.4.107.3(Sampling and amplitude quantisation during data acquisition)	-	0	-
201.12.4.108(Printing, electronic storage and transmission)	-	0	-
201.12.4.108.1(Record identification)	-	0	-
201.12.4.108.2(PATIENT identification)	-	0	-
201.12.4.108.3.1(Time and event markers)	-	0	-
201.12.4.108.3.2(Recording speed)	-	0	-
201.12.4.108.3.3(Time and amplitude ruling)	-	0	-
201.12.4.109(Use with cardiac pacemakers)	-	0	-
201.13(HAZARDOUS SITUATIONS and fault conditions)	-	20000	-
201.15(Mechanical strength, Temperature, current)	-	30000	-
15.3(Force, Dimensions, Temperature)	-	0	-
201.16(Leakage currents , dielectirc strength)	-	30000	-
201.7(ME EQUIPMENT identification, marking and documents)	-	20000	-
201.10(Protection against unwanted and excessive radiation HAZARDS)	-	0	-
201.6(Classification of ME EQUIPMENT and ME SYSTEMS)	-	0	-
201.4(General requirements)	-	0	-
201.5(General requirements for testing of ME EQUIPMENT)	-	0	-
201.6(Classification of ME EQUIPMENT and ME SYSTEMS)	-	0	-
201.7(ME EQUIPMENT identification, marking and documents)	-	0	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	0	-
201.9(Protection against MECHANICAL HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	0	-
201.1(Protection against unwanted and excessive radiation HAZARDS)	-	0	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	0	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	0	-
201.13(HAZARDOUS SITUATIONS and fault conditions)	-	0	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS))	-	0	-
201.15(Construction of ME EQUIPMENT)	-	0	-
201.16(ME SYSTEMS)	-	0	-
202.6.1(EMISSIONS)	-	15000	-
202.6.2.2(ELECTROSTATIC DISCHARGE (ESD))	-	15000	-
202.6.2.4(Electrical fast transients and bursts)	-	15000	-
201.4(Power and Current)	-	0	-
201.5(Temperature, Humidity, Dimensions, Force)	-	0	-
201.7.4.101(Qualitative)	-	0	-
201.8(Current, Voltage, Energy, Dimensions, Impedance)	-	0	-
201.8.5.5.1(Voltage, Time)	-	0	-
201.8.5.5.2(Energy)	-	0	-
201.9(Mechanical dimensions, strength , torque, force)	-	0	-
201.11(Temperature)	-	0	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	0	-
201.12.1.101.1(Automated measurements on ECGS)	-	0	-
201.12.1.101.2(Requirements for amplitude measurements)	-	0	-
201.12.1.101.3(Requirements for interval measurements)	-	0	-
201.12.1.101.3.1(* Requirements for absolute interval and wave duration measurements)	-	0	-
201.12.1.101.3.2()	-	0	-
201.12.4(Protection against hazardous output)	-	0	-
201.12.4.101(Indication of inoperable ELECTROCARDIOGRAPH)	-	0	-
201.12.4.102(ECG signals)	-	0	-
201.12.4.102.1(ECG signals)	-	0	-
201.12.4.102.2(Minimum required configuration)	-	0	-
201.12.4.102.3(ECG signals)	-	0	-
201.12.4.102.3.1(General)	-	0	-
201.12.4.102.3.2(Goldberger and Wilson LEADS)	-	0	-
201.12.4.102.4(Recovery time)	-	0	-
201.12.4.103(Input impedance)	-	0	-
201.12.4.104(Required GAINS)	-	0	-
201.12.4.105.2(Overload tolerance)	-	0	-
201.12.4.105.3(FILTERS (including line frequency interference FILTERS))	-	0	-
201.12.4.106.1(Noise level)	-	0	-
201.12.4.106.2(CHANNEL crosstalk)	-	0	-
201.12.4.107.1.1.1(High Frequency Response)	-	0	-
201.12.4.107.1.1.2(Low frequency (impulse) response)	-	0	-
201.12.4.107.1.2(Test with calibration ECG)	-	0	-
201.12.4.107.2(Linearity and Dynamic range)	-	0	-
201.12.4.107.3(Sampling and amplitude quantisation during data acquisition)	-	0	-
201.12.4.108(Printing, electronic storage and transmission)	-	0	-
201.12.4.108.1(Record identification)	-	0	-
201.12.4.108.2(PATIENT identification)	-	0	-
201.12.4.108.3.1(Time and event markers)	-	0	-
201.12.4.108.3.2(Recording speed)	-	0	-
201.12.4.108.3.3(Time and amplitude ruling)	-	0	-
201.12.4.109(Use with cardiac pacemakers)	-	0	-
201.13(HAZARDOUS SITUATIONS and fault conditions)	-	0	-
201.15(Mechanical strength, Temperature, current)	-	0	-
15.3(Force, Dimensions, Temperature)	-	0	-
201.16(Leakage currents , dielectirc strength)	-	0	-
201.7(ME EQUIPMENT identification, marking and documents)	-	0	-
201.10(Protection against unwanted and excessive radiation HAZARDS)	-	0	-
201.6(Classification of ME EQUIPMENT and ME SYSTEMS)	-	0	-
201.4(General requirements)	-	0	-
201.5(General requirements for testing of ME EQUIPMENT)	-	0	-
201.6(Classification of ME EQUIPMENT and ME SYSTEMS)	-	0	-
201.7(ME EQUIPMENT identification, marking and documents)	-	0	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	0	-
201.9(Protection against MECHANICAL HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	0	-
201.1(Protection against unwanted and excessive radiation HAZARDS)	-	0	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	0	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	0	-
201.13(HAZARDOUS SITUATIONS and fault conditions)	-	0	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS))	-	0	-
201.15(Construction of ME EQUIPMENT)	-	0	-
201.16(ME SYSTEMS)	-	0	-
202.6.1(EMISSIONS)	-	0	-
202.6.2.2(ELECTROSTATIC DISCHARGE (ESD))	-	0	-
202.6.2.4(Electrical fast transients and bursts)	-	0	-
201.4(Power and Current)	-	0	-
201.5(Temperature, Humidity, Dimensions, Force)	-	0	-
201.7.4.101(Qualitative)	-	0	-
201.8(Current, Voltage, Energy, Dimensions, Impedance)	-	0	-
201.8.5.5.1(Voltage, Time)	-	0	-
201.8.5.5.2(Energy)	-	0	-
201.9(Mechanical dimensions, strength , torque, force)	-	0	-
201.11(Temperature)	-	0	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	0	-
201.12.1.101.1(Automated measurements on ECGS)	-	0	-
201.12.1.101.2(Requirements for amplitude measurements)	-	0	-
201.12.1.101.3(Requirements for interval measurements)	-	0	-
201.12.1.101.3.1(* Requirements for absolute interval and wave duration measurements)	-	0	-
201.12.1.101.3.2()	-	0	-
201.12.4(Protection against hazardous output)	-	0	-
201.12.4.101(Indication of inoperable ELECTROCARDIOGRAPH)	-	0	-
201.12.4.102(ECG signals)	-	0	-
201.12.4.102.1(ECG signals)	-	0	-
201.12.4.102.2(Minimum required configuration)	-	0	-
201.12.4.102.3(ECG signals)	-	0	-
201.12.4.102.3.1(General)	-	0	-
201.12.4.102.3.2(Goldberger and Wilson LEADS)	-	0	-
201.12.4.102.4(Recovery time)	-	0	-
201.12.4.103(Input impedance)	-	0	-
201.12.4.104(Required GAINS)	-	0	-
201.12.4.105.2(Overload tolerance)	-	0	-
201.12.4.105.3(FILTERS (including line frequency interference FILTERS))	-	0	-
201.12.4.106.1(Noise level)	-	0	-
201.12.4.106.2(CHANNEL crosstalk)	-	0	-
201.12.4.107.1.1.1(High Frequency Response)	-	0	-
201.12.4.107.1.1.2(Low frequency (impulse) response)	-	0	-
201.12.4.107.1.2(Test with calibration ECG)	-	0	-
201.12.4.107.2(Linearity and Dynamic range)	-	0	-
201.12.4.107.3(Sampling and amplitude quantisation during data acquisition)	-	0	-
201.12.4.108(Printing, electronic storage and transmission)	-	0	-
201.12.4.108.1(Record identification)	-	0	-
201.12.4.108.2(PATIENT identification)	-	0	-
201.12.4.108.3.1(Time and event markers)	-	0	-
201.12.4.108.3.2(Recording speed)	-	0	-
201.12.4.108.3.3(Time and amplitude ruling)	-	0	-
201.12.4.109(Use with cardiac pacemakers)	-	0	-
201.13(HAZARDOUS SITUATIONS and fault conditions)	-	0	-
201.15(Mechanical strength, Temperature, current)	-	0	-
15.3(Force, Dimensions, Temperature)	-	0	-
201.16(Leakage currents , dielectirc strength)	-	0	-
201.7(ME EQUIPMENT identification, marking and documents)	-	0	-
201.10(Protection against unwanted and excessive radiation HAZARDS)	-	0	-
201.6(Classification of ME EQUIPMENT and ME SYSTEMS)	-	0	-
201.4(General requirements)	-	0	-
201.5(General requirements for testing of ME EQUIPMENT)	-	0	-
201.6(Classification of ME EQUIPMENT and ME SYSTEMS)	-	0	-
201.7(ME EQUIPMENT identification, marking and documents)	-	0	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	0	-
201.9(Protection against MECHANICAL HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	0	-
201.1(Protection against unwanted and excessive radiation HAZARDS)	-	0	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	0	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	0	-
201.13(HAZARDOUS SITUATIONS and fault conditions)	-	0	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS))	-	0	-
201.15(Construction of ME EQUIPMENT)	-	0	-
201.16(ME SYSTEMS)	-	0	-
202.6.1(EMISSIONS)	-	0	-
202.6.2.2(ELECTROSTATIC DISCHARGE (ESD))	-	0	-
202.6.2.4(Electrical fast transients and bursts)	-	0	-

05 Nov, 2029

-
Included w.e.f.17.03.2025 Exclusion Cl 201.17 (Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS) Cl 202 (Electromagnetic compatibility – Requirements and tests) Cl 202.6.2.3 (Radiated RF electromagnetic fields) Cl 202.6.2.6 (Conducted disturbances, induced by RF fields) Cl 202.6.2.101 (Electrosurgery interference)

8392

Astute Labs Pvt Ltd, Pune

7174321

IS 13450 : Part 2 : Sec 27 (2018)

Medical electrical equipment: Part 2 particular requirements for the basic safety and essential performance: Sec 27 electrocardiographic monitoring equipment

300000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
201.4(General requirements)	-	15000	-
201.5(General requirements for testing of ME EQUIPMENT)	-	15000	-
201.6(Classification of ME EQUIPMENT and ME SYSTEMS)	-	15000	-
201.7(ME EQUIPMENT identification, marking and documents)	-	15000	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	15000	-
201.9(Protection against MECHANICAL HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	15000	-
201.1(Protection against unwanted and excessive radiation HAZARDS)	-	15000	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	30000	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	45000	-
201.13(HAZARDOUS SITUATIONS and fault conditions)	-	30000	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS)	-	15000	-
201.15(Construction of ME EQUIPMENT)	-	15000	-
201.16(Me Systems)	-	30000	-
208(General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems)	-	30000	-
201.4(General requirements)	-	0	-
201.5(General requirements for testing of ME EQUIPMENT)	-	0	-
201.6(Classification of ME EQUIPMENT and ME SYSTEMS)	-	0	-
201.7(ME EQUIPMENT identification, marking and documents)	-	0	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	0	-
201.9(Protection against MECHANICAL HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	0	-
201.1(Protection against unwanted and excessive radiation HAZARDS)	-	0	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	0	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	0	-
201.13(HAZARDOUS SITUATIONS and fault conditions)	-	0	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS)	-	0	-
201.15(Construction of ME EQUIPMENT)	-	0	-
201.16(Me Systems)	-	0	-
208(General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems)	-	0	-
201.4(General requirements)	-	0	-
201.5(General requirements for testing of ME EQUIPMENT)	-	0	-
201.6(Classification of ME EQUIPMENT and ME SYSTEMS)	-	0	-
201.7(ME EQUIPMENT identification, marking and documents)	-	0	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	0	-
201.9(Protection against MECHANICAL HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	0	-
201.1(Protection against unwanted and excessive radiation HAZARDS)	-	0	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	0	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	0	-
201.13(HAZARDOUS SITUATIONS and fault conditions)	-	0	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS)	-	0	-
201.15(Construction of ME EQUIPMENT)	-	0	-
201.16(Me Systems)	-	0	-
208(General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems)	-	0	-

05 Nov, 2029

-
Included w.e.f.09.04.2025 Exclusion Cl 201.17 (Electromagnetic compatibility of ME equipment and ME systems) Cl 202 (Electromagnetic compatibility-Requirement and tests)

8393

Intertek India Private Limited, New Delhi (E-20)

8122426

IS 302 : Part 1 (2008)

Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)

154000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	1000	-
8.1.1(Protection against live parts in all positions)	-	1000	-
8.1.2(Protection against live parts in openings)	-	1000	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	1000	-
8.1.4(Protection against live parts against protective impedance)	-	1000	-
10.1(Power input)	-	7000	-
10.2(Current input)	-	7000	-
11.1(General)	-	0	Refer charges of Cl. 11.8
11.2(General)	-	0	Refer charges of Cl. 11.8
11.3(Heating)	-	0	Refer charges of Cl. 11.8
13.1(General)	-	0	-
13.2(Leakage current at operating temperature)	-	6000	-
13.3(Electric Strength at operating temperature)	-	6000	-
14(Transient Over Voltages)	-	9000	-
15.0(General)	-	0	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	0	Refer charges of Cl. 15.2 and Cl. 15.3
15.2(Spillage Test)	-	8000	-
15.3(Humidity Test)	-	8000	-
16.0(General)	-	0	-
16.1(General)	-	0	-
16.2(Leakage Current (after Clause 15))	-	6000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	6000	-
17(Over Load Protection of Transformers and associated circuits)	-	9000	-
19(Abnormal Operation)	-	15000	-
20(Stability test)	-	3000	-
21(Mechanical Strength Test)	-	4000	-
22(Construction verification related test)	-	12000	-
23(General)	-	3000	-
24(Components)	-	1000	-
25(Supply connection and external flexible cords)	-	4000	-
26(Terminals for external conductors)	-	1000	-
27(Provision for earthing)	-	2000	-
28(Screw test and connections)	-	2000	-
29(clearance, creepage distances and solid insulation)	-	5000	-
30.1(Ball pressure test)	-	3000	-
30.2(Glow Wire Test)	-	3000	-
30.2(Needle Flame Test)	-	3000	-
31(Resistance to Rusting)	-	0	-
4(General Requirement)	-	0	-
5(General conditions for tests)	-	0	-
6(Classification- IS 302-1)	-	0	-
18(Endurance Test requirements and tests)	-	0	-
4(General requirement)	-	0	-
16(Leakage current and electric strength)	-	0	Refer charges of Cl. 16.2 and Cl.16.3
17(Overload protection of transformers and associated circuits)	-	0	Clause repeated
9(Starting of motor operation test requirements and tests)	-	0	-
18(Endurance)	-	0	-
8.1.5(Live parts of built-in appliances)	-	1000	-
11.4(Heating appliances)	-	0	Refer charges of Cl. 11.8
11.5(Motor-operated appliances)	-	0	Refer charges of Cl. 11.8
11.6(Combined appliances)	-	0	Refer charges of Cl. 11.8
11.7(Duration corresponding)	-	0	Refer charges of Cl. 11.8
11.8(Temperature rise)	-	15000	-
7(Marking and instructions)	-	0	Clause repeated
8.1.1(Protection against live parts in all positions)	-	0	Clause repeated
8.1.2(Protection against live parts in openings)	-	0	Clause repeated
8.1.3(Protection against live parts in visible glowing heating elements)	-	0	Clause repeated
8.1.4(Protection against live parts against protective impedance)	-	0	Clause repeated
10.1(Power input)	-	0	Clause repeated
10.2(Current input)	-	0	Clause repeated
11.1(General)	-	0	Clause repeated
11.2(General)	-	0	Clause repeated
11.3(Heating)	-	0	Clause repeated
13.1(General)	-	0	Clause repeated
13.2(Leakage current at operating temperature)	-	0	Clause repeated
13.3(Electric Strength at operating temperature)	-	0	Clause repeated
14(Transient Over Voltages)	-	0	Clause repeated
15.0(General)	-	0	Clause repeated
15.1(Ingress Protection test other than IPX0 (IP test))	-	0	Clause repeated
15.2(Spillage Test)	-	0	Clause repeated
15.3(Humidity Test)	-	0	Clause repeated
16.0(General)	-	0	Clause repeated
16.1(General)	-	0	Clause repeated
16.2(Leakage Current (after Clause 15))	-	0	Clause repeated
16.3(Electric Strength (after clause 15 and 16.2))	-	0	Clause repeated
17(Over Load Protection of Transformers and associated circuits)	-	0	Clause repeated
19(Abnormal Operation)	-	0	Clause repeated
20(Stability test)	-	0	Clause repeated
21(Mechanical Strength Test)	-	0	Clause repeated
22(Construction verification related test)	-	0	Clause repeated
23(General)	-	0	Clause repeated
24(Components)	-	0	Clause repeated
25(Supply connection and external flexible cords)	-	0	Clause repeated
26(Terminals for external conductors)	-	0	Clause repeated
27(Provision for earthing)	-	0	Clause repeated
28(Screw test and connections)	-	0	Clause repeated
29(clearance, creepage distances and solid insulation)	-	0	Clause repeated
30.1(Ball pressure test)	-	0	Clause repeated
30.2(Glow Wire Test)	-	0	Clause repeated
30.2(Needle Flame Test)	-	0	Clause repeated
31(Resistance to Rusting)	-	0	Clause repeated
4(General Requirement)	-	0	Clause repeated
5(General conditions for tests)	-	0	Clause repeated
6(Classification- IS 302-1)	-	0	Clause repeated
18(Endurance Test requirements and tests)	-	0	Clause repeated
4(General requirement)	-	0	Clause repeated
16(Leakage current and electric strength)	-	0	Clause repeated
17(Overload protection of transformers and associated circuits)	-	0	Clause repeated
9(Starting of motor operation test requirements and tests)	-	0	Clause repeated
18(Endurance)	-	0	Clause repeated
8.1.5(Live parts of built-in appliances)	-	0	Clause repeated
11.4(Heating appliances)	-	0	Clause repeated
11.5(Motor-operated appliances)	-	0	Clause repeated
11.6(Combined appliances)	-	0	Clause repeated
11.7(Duration corresponding)	-	0	Clause repeated
11.8(Temperature rise)	-	0	Clause repeated

27 Oct, 2028

-
Included.w.e.f.10.01.2025 Exclusion Cl 32 (Radiation Toxicity and Similar Hazards) Cl 19.11.4.1 (Electrostatic discharges) Cl 19.11.4.2 (Radiated fields) Cl 19.11.4.3 (Fast transient bursts) Cl 19.11.4.4 (Surge immunity test) Cl 19.11.4.5 (Immunity to conducted discharges) Cl 19.11.4.6 (Class 3 Voltage dips and interruptions) Cl 19.11.4.7 (Harmonics) Cl 22 (Construction verification related test) "(1)Cooking ranges, hobs, ovens and similar appliances, (2)Commercial Dispensing Appliances and Vending Machines, (3) spin extractors (For testing charges please refer relevant Part 2 standard in LIMS)"

8394

Astute Labs Pvt Ltd, Pune

7174321

IS 13450 : Part 2 : Sec 34 (2019)

Medical Electrical Equipment Part 2 Particular Requirements for the Basic Safety and Essential Performance Section 34 Invasive blood pressure monitoring equipment

500000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
201.4(General requirements)	-	30000	-
201.5(General requirements for testing of ME EQUIPMENT)	-	30000	-
201.6.2(Protection against electric shock)	-	15000	-
201.6.6(Mode of operation)	-	15000	-
201.7(ME EQUIPMENT identification, marking and documents)	-	40000	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	50000	-
201.9(Protection against MECHANICAL HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	30000	-
201.1(Protection against unwanted and excessive radiation HAZARDS)	-	30000	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	30000	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	60000	-
201.13(HAZARDOUS SITUATIONS and fault conditions)	-	40000	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS))	-	40000	-
201.15(Construction of ME EQUIPMENT)	-	30000	-
201.16(ME SYSTEMS)	-	30000	-
208(General requirements, tests and guidance for alarm systems in MEDICAL ELECTRICAL EQUIPMENT and MEDICAL ELECTRICAL SYSTEMS)	-	30000	-
201.4(General requirements)	-	0	-
201.5(General requirements for testing of ME EQUIPMENT)	-	0	-
201.6.2(Protection against electric shock)	-	0	-
201.6.6(Mode of operation)	-	0	-
201.7(ME EQUIPMENT identification, marking and documents)	-	0	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	0	-
201.9(Protection against MECHANICAL HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	0	-
201.1(Protection against unwanted and excessive radiation HAZARDS)	-	0	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	0	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	0	-
201.13(HAZARDOUS SITUATIONS and fault conditions)	-	0	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS))	-	0	-
201.15(Construction of ME EQUIPMENT)	-	0	-
201.16(ME SYSTEMS)	-	0	-
208(General requirements, tests and guidance for alarm systems in MEDICAL ELECTRICAL EQUIPMENT and MEDICAL ELECTRICAL SYSTEMS)	-	0	-
201.4(General requirements)	-	0	-
201.5(General requirements for testing of ME EQUIPMENT)	-	0	-
201.6.2(Protection against electric shock)	-	0	-
201.6.6(Mode of operation)	-	0	-
201.7(ME EQUIPMENT identification, marking and documents)	-	0	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	0	-
201.9(Protection against MECHANICAL HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	0	-
201.1(Protection against unwanted and excessive radiation HAZARDS)	-	0	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	0	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	0	-
201.13(HAZARDOUS SITUATIONS and fault conditions)	-	0	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS))	-	0	-
201.15(Construction of ME EQUIPMENT)	-	0	-
201.16(ME SYSTEMS)	-	0	-
208(General requirements, tests and guidance for alarm systems in MEDICAL ELECTRICAL EQUIPMENT and MEDICAL ELECTRICAL SYSTEMS)	-	0	-

05 Nov, 2029

-
Included w.e.f.17.03.2025 Exclusion Cl 201.17 (Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS) Cl 202 (Electromagnetic compatibility – Requirements and tests)

8395

VARDAN ENVIROLAB, GURUGRAM

8169616

IS 17782 (2021)

FORTIFIED RICE KERNELS-SPECIFICATION

Fortified Rice Kernel

26100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Description)	-	100	-
4.1.1(length, breadth, and thickness)	-	500	-
4.1.2(length, breadth, thickness, thousand kernel weight, and true density)	-	500	-
4.1.6(ree from added colouring matter, metal peices and other impurities)	-	500	-
4.3(Pesticides/insecticides residues, poisonous metals, naturally occurring toxic substances and other contaminant Aflatoxins)	-	5000	-
Table-1, (4.1.3, 4.1.5 and 8)(i) Iron, mg/100 g)	-	1000	-
Table-1, (4.1.3, 4.1.5 and 8)(ii) Folic acid, μg/100 g)	-	1500	-
Table-1, (4.1.3, 4.1.5 and 8)(iii) Vitamin B12, μg/100 g)	-	1500	-
Table-2, 4.1.4, 4.1.5 and 8(i) Zinc, mg/100 g)	-	1000	-
Table-2, 4.1.4, 4.1.5 and 8(ii) Vitamin A, μg/100 g)	-	1500	-
Table-2, 4.1.4, 4.1.5 and 8(iii) Thiamine)	-	1500	-
Table-2, 4.1.4, 4.1.5 and 8(iv) Riboflavin (Vitamin B2), mg/100 g)	-	1500	-
Table-2, 4.1.4, 4.1.5 and 8(v) Niacin (Vitamin B3), mg/100 g)	-	1500	-
Table-2, 4.1.4, 4.1.5 and 8(vi) Pyridoxine (Vitamin B6), mg/100 g)	-	1500	-
Table-3, 4.1.6 and 8(i) Moisture content,)	-	500	-
Table-3, 4.1.6 and 8(ii) Broken fortified rice kernels,)	-	500	-
Table-3, 4.1.6 and 8(iii) Foreign matter,)	-	500	-
Table-3, 4.1.6 and 8(iv) Damaged grains)	-	500	-
Table-3, 4.1.6 and 8(v) Discolored grains)	-	500	-
Table-3, 4.1.6 and 8(vi) Chalky grains)	-	500	-
Table-3, 4.1.6 and 8(vii) Admixture)	-	500	-
Table-4, 4.7 and 8(i) Total plate count,)	-	1000	-
Table-4, 4.7 and 8(ii) Yeasts and moulds,)	-	1000	-
Table-4, 4.7 and 8(iii) Coliform count,)	-	1000	-
4.5(Cooking Quality)	-	500	-
4.1(Description)	-	0	-
4.1.1(length, breadth, and thickness)	-	0	-
4.1.2(length, breadth, thickness, thousand kernel weight, and true density)	-	0	-
4.1.6(ree from added colouring matter, metal peices and other impurities)	-	0	-
4.3(Pesticides/insecticides residues, poisonous metals, naturally occurring toxic substances and other contaminant Aflatoxins)	-	0	-
Table-1, (4.1.3, 4.1.5 and 8)(i) Iron, mg/100 g)	-	0	-
Table-1, (4.1.3, 4.1.5 and 8)(ii) Folic acid, μg/100 g)	-	0	-
Table-1, (4.1.3, 4.1.5 and 8)(iii) Vitamin B12, μg/100 g)	-	0	-
Table-2, 4.1.4, 4.1.5 and 8(i) Zinc, mg/100 g)	-	0	-
Table-2, 4.1.4, 4.1.5 and 8(ii) Vitamin A, μg/100 g)	-	0	-
Table-2, 4.1.4, 4.1.5 and 8(iii) Thiamine)	-	0	-
Table-2, 4.1.4, 4.1.5 and 8(iv) Riboflavin (Vitamin B2), mg/100 g)	-	0	-
Table-2, 4.1.4, 4.1.5 and 8(v) Niacin (Vitamin B3), mg/100 g)	-	0	-
Table-2, 4.1.4, 4.1.5 and 8(vi) Pyridoxine (Vitamin B6), mg/100 g)	-	0	-
Table-3, 4.1.6 and 8(i) Moisture content,)	-	0	-
Table-3, 4.1.6 and 8(ii) Broken fortified rice kernels,)	-	0	-
Table-3, 4.1.6 and 8(iii) Foreign matter,)	-	0	-
Table-3, 4.1.6 and 8(iv) Damaged grains)	-	0	-
Table-3, 4.1.6 and 8(v) Discolored grains)	-	0	-
Table-3, 4.1.6 and 8(vi) Chalky grains)	-	0	-
Table-3, 4.1.6 and 8(vii) Admixture)	-	0	-
Table-4, 4.7 and 8(i) Total plate count,)	-	0	-
Table-4, 4.7 and 8(ii) Yeasts and moulds,)	-	0	-
Table-4, 4.7 and 8(iii) Coliform count,)	-	0	-
4.5(Cooking Quality)	-	0	-
4.1(Description)	-	0	-
4.1.1(length, breadth, and thickness)	-	0	-
4.1.2(length, breadth, thickness, thousand kernel weight, and true density)	-	0	-
4.1.6(ree from added colouring matter, metal peices and other impurities)	-	0	-
4.3(Pesticides/insecticides residues, poisonous metals, naturally occurring toxic substances and other contaminant Aflatoxins)	-	0	-
Table-1, (4.1.3, 4.1.5 and 8)(i) Iron, mg/100 g)	-	0	-
Table-1, (4.1.3, 4.1.5 and 8)(ii) Folic acid, μg/100 g)	-	0	-
Table-1, (4.1.3, 4.1.5 and 8)(iii) Vitamin B12, μg/100 g)	-	0	-
Table-2, 4.1.4, 4.1.5 and 8(i) Zinc, mg/100 g)	-	0	-
Table-2, 4.1.4, 4.1.5 and 8(ii) Vitamin A, μg/100 g)	-	0	-
Table-2, 4.1.4, 4.1.5 and 8(iii) Thiamine)	-	0	-
Table-2, 4.1.4, 4.1.5 and 8(iv) Riboflavin (Vitamin B2), mg/100 g)	-	0	-
Table-2, 4.1.4, 4.1.5 and 8(v) Niacin (Vitamin B3), mg/100 g)	-	0	-
Table-2, 4.1.4, 4.1.5 and 8(vi) Pyridoxine (Vitamin B6), mg/100 g)	-	0	-
Table-3, 4.1.6 and 8(i) Moisture content,)	-	0	-
Table-3, 4.1.6 and 8(ii) Broken fortified rice kernels,)	-	0	-
Table-3, 4.1.6 and 8(iii) Foreign matter,)	-	0	-
Table-3, 4.1.6 and 8(iv) Damaged grains)	-	0	-
Table-3, 4.1.6 and 8(v) Discolored grains)	-	0	-
Table-3, 4.1.6 and 8(vi) Chalky grains)	-	0	-
Table-3, 4.1.6 and 8(vii) Admixture)	-	0	-
Table-4, 4.7 and 8(i) Total plate count,)	-	0	-
Table-4, 4.7 and 8(ii) Yeasts and moulds,)	-	0	-
Table-4, 4.7 and 8(iii) Coliform count,)	-	0	-
4.5(Cooking Quality)	-	0	-
4.1(Description)	-	0	-
4.1.1(length, breadth, and thickness)	-	0	-
4.1.2(length, breadth, thickness, thousand kernel weight, and true density)	-	0	-
4.1.6(ree from added colouring matter, metal peices and other impurities)	-	0	-
4.3(Pesticides/insecticides residues, poisonous metals, naturally occurring toxic substances and other contaminant Aflatoxins)	-	0	-
Table-1, (4.1.3, 4.1.5 and 8)(i) Iron, mg/100 g)	-	0	-
Table-1, (4.1.3, 4.1.5 and 8)(ii) Folic acid, μg/100 g)	-	0	-
Table-1, (4.1.3, 4.1.5 and 8)(iii) Vitamin B12, μg/100 g)	-	0	-
Table-2, 4.1.4, 4.1.5 and 8(i) Zinc, mg/100 g)	-	0	-
Table-2, 4.1.4, 4.1.5 and 8(ii) Vitamin A, μg/100 g)	-	0	-
Table-2, 4.1.4, 4.1.5 and 8(iii) Thiamine)	-	0	-
Table-2, 4.1.4, 4.1.5 and 8(iv) Riboflavin (Vitamin B2), mg/100 g)	-	0	-
Table-2, 4.1.4, 4.1.5 and 8(v) Niacin (Vitamin B3), mg/100 g)	-	0	-
Table-2, 4.1.4, 4.1.5 and 8(vi) Pyridoxine (Vitamin B6), mg/100 g)	-	0	-
Table-3, 4.1.6 and 8(i) Moisture content,)	-	0	-
Table-3, 4.1.6 and 8(ii) Broken fortified rice kernels,)	-	0	-
Table-3, 4.1.6 and 8(iii) Foreign matter,)	-	0	-
Table-3, 4.1.6 and 8(iv) Damaged grains)	-	0	-
Table-3, 4.1.6 and 8(v) Discolored grains)	-	0	-
Table-3, 4.1.6 and 8(vi) Chalky grains)	-	0	-
Table-3, 4.1.6 and 8(vii) Admixture)	-	0	-
Table-4, 4.7 and 8(i) Total plate count,)	-	0	-
Table-4, 4.7 and 8(ii) Yeasts and moulds,)	-	0	-
Table-4, 4.7 and 8(iii) Coliform count,)	-	0	-
4.5(Cooking Quality)	-	0	-
4.1(Description)	-	0	-
4.1.1(length, breadth, and thickness)	-	0	-
4.1.2(length, breadth, thickness, thousand kernel weight, and true density)	-	0	-
4.1.6(ree from added colouring matter, metal peices and other impurities)	-	0	-
4.3(Pesticides/insecticides residues, poisonous metals, naturally occurring toxic substances and other contaminant Aflatoxins)	-	0	-
Table-1, (4.1.3, 4.1.5 and 8)(i) Iron, mg/100 g)	-	0	-
Table-1, (4.1.3, 4.1.5 and 8)(ii) Folic acid, μg/100 g)	-	0	-
Table-1, (4.1.3, 4.1.5 and 8)(iii) Vitamin B12, μg/100 g)	-	0	-
Table-2, 4.1.4, 4.1.5 and 8(i) Zinc, mg/100 g)	-	0	-
Table-2, 4.1.4, 4.1.5 and 8(ii) Vitamin A, μg/100 g)	-	0	-
Table-2, 4.1.4, 4.1.5 and 8(iii) Thiamine)	-	0	-
Table-2, 4.1.4, 4.1.5 and 8(iv) Riboflavin (Vitamin B2), mg/100 g)	-	0	-
Table-2, 4.1.4, 4.1.5 and 8(v) Niacin (Vitamin B3), mg/100 g)	-	0	-
Table-2, 4.1.4, 4.1.5 and 8(vi) Pyridoxine (Vitamin B6), mg/100 g)	-	0	-
Table-3, 4.1.6 and 8(i) Moisture content,)	-	0	-
Table-3, 4.1.6 and 8(ii) Broken fortified rice kernels,)	-	0	-
Table-3, 4.1.6 and 8(iii) Foreign matter,)	-	0	-
Table-3, 4.1.6 and 8(iv) Damaged grains)	-	0	-
Table-3, 4.1.6 and 8(v) Discolored grains)	-	0	-
Table-3, 4.1.6 and 8(vi) Chalky grains)	-	0	-
Table-3, 4.1.6 and 8(vii) Admixture)	-	0	-
Table-4, 4.7 and 8(i) Total plate count,)	-	0	-
Table-4, 4.7 and 8(ii) Yeasts and moulds,)	-	0	-
Table-4, 4.7 and 8(iii) Coliform count,)	-	0	-
4.5(Cooking Quality)	-	0	-
4.1(Description)	-	0	-
4.1.1(length, breadth, and thickness)	-	0	-
4.1.2(length, breadth, thickness, thousand kernel weight, and true density)	-	0	-
4.1.6(ree from added colouring matter, metal peices and other impurities)	-	0	-
4.3(Pesticides/insecticides residues, poisonous metals, naturally occurring toxic substances and other contaminant Aflatoxins)	-	0	-
Table-1, (4.1.3, 4.1.5 and 8)(i) Iron, mg/100 g)	-	0	-
Table-1, (4.1.3, 4.1.5 and 8)(ii) Folic acid, μg/100 g)	-	0	-
Table-1, (4.1.3, 4.1.5 and 8)(iii) Vitamin B12, μg/100 g)	-	0	-
Table-2, 4.1.4, 4.1.5 and 8(i) Zinc, mg/100 g)	-	0	-
Table-2, 4.1.4, 4.1.5 and 8(ii) Vitamin A, μg/100 g)	-	0	-
Table-2, 4.1.4, 4.1.5 and 8(iii) Thiamine)	-	0	-
Table-2, 4.1.4, 4.1.5 and 8(iv) Riboflavin (Vitamin B2), mg/100 g)	-	0	-
Table-2, 4.1.4, 4.1.5 and 8(v) Niacin (Vitamin B3), mg/100 g)	-	0	-
Table-2, 4.1.4, 4.1.5 and 8(vi) Pyridoxine (Vitamin B6), mg/100 g)	-	0	-
Table-3, 4.1.6 and 8(i) Moisture content,)	-	0	-
Table-3, 4.1.6 and 8(ii) Broken fortified rice kernels,)	-	0	-
Table-3, 4.1.6 and 8(iii) Foreign matter,)	-	0	-
Table-3, 4.1.6 and 8(iv) Damaged grains)	-	0	-
Table-3, 4.1.6 and 8(v) Discolored grains)	-	0	-
Table-3, 4.1.6 and 8(vi) Chalky grains)	-	0	-
Table-3, 4.1.6 and 8(vii) Admixture)	-	0	-
Table-4, 4.7 and 8(i) Total plate count,)	-	0	-
Table-4, 4.7 and 8(ii) Yeasts and moulds,)	-	0	-
Table-4, 4.7 and 8(iii) Coliform count,)	-	0	-
4.5(Cooking Quality)	-	0	-

26 Dec, 2027

-
Exclusion: 4.5.1 (Percent solid loss) 4.5.2 (Cooking time) 4.5.3 (Texture of the cooked fortified rice) 4.5.4 (iron, folic acid, vitamin B12)

8396

TYPE TEST CENTER SIEMENS LIMITED KALWA, NAVI MUMBAI

7174421

IS/IEC 60947 : Part 4 : Sec 1 (2018)

Low-Voltage switchgear and controlgear : Part 4-1 Contactors and motor starters electromechanical contactors and motor-Starters

Electromechanical contactors and motor-starters

1500000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.2(Materials)	-	20000	Manufacturer to provide declaration from supplier
8.1.2.1(General materials requirements)	-	0	Covered in main clause. Manufacturer to provide declaration from supplier
8.1.2.2(Glow wire testing)	-	0	Covered in main clause. Manufacturer to provide declaration from supplier
8.1.2.3(Test based on flammability category)	-	0	Covered in main clause. Manufacturer to provide declaration from supplier
8.1.3(Current-carrying parts and their connections)	-	20000	-
8.1.4(Clearances and creepage distances)	-	25000	-
8.1.5.1(Insulation)	-	0	Covered in main clause.
8.1.5.2(Direction of movement)	-	0	Covered in main clause.
8.1.5.3(Mounting)	-	0	Covered in main clause.
8.1.5.4(Protection)	-	0	Covered in main clause.
8.1.8(Terminals)	-	25000	-
8.1.8.1(General)	-	0	Covered in main clause.
8.1.8.2(Terminal identification and marking)	-	0	Covered in main clause.
8.1.9(Additional requirements for equipment provided with a neutral pole)	-	0	Covered in main clause.
8.1.10(Provisions for protective earthing)	-	0	Covered in main clause.
8.1.11(Enclosures for equipment)	-	0	Covered in main clause.
8.1.11.1(Design)	-	0	Covered in main clause.
8.1.11.2(Insulation)	-	0	Covered in main clause.
8.1.12(Degrees of protection of enclosed equipment)	-	50000	-
8.1.13(Conduit pull-out, torque and bending with metallic conduits)	-	50000	-
8.1.14(Limited energy source)	-	50000	-
8.1.14.1(General)	-	0	Covered in main clause.
8.1.14.2(Limited energy source with galvanic separation)	-	0	Covered in main clause.
8.1.14.3(Limited energy source with current limiting impedance)	-	50000	Covered in main clause.
8.1.15(Stored charge energy circuit)	-	50000	-
8.1.16(Fault and abnormal conditions)	-	25000	-
8.1.17(Short-circuit and overload protection of ports)	-	25000	-
8.2(Performance requirements)	-	0	Refer Sequence charges
8.2.1(Operating conditions)	-	0	Refer Sequence charges
8.2.1.1.1(General conditions)	-	0	Refer Sequence charges
8.2.1.2(Limits of operation of contactors and power-operated starters)	-	0	Refer Sequence charges
8.2.1.3(Limits of operation of under-voltage relays and releases)	-	0	Refer Sequence charges
8.2.1.4(Limits of operation of shunt-coil operated releases (shunt trip))	-	0	Refer Sequence charges
8.2.1.5(Limits of operation of current sensing relays and releases)	-	50000	-
8.2.1.5.1(Limits of operation of time-delay overload relays when all poles are energized)	-	0	Refer Sequence charges
8.2.1.5.1.1(General tripping requirements of overload relays)	-	0	Refer Sequence charges
8.2.1.5.1.2(Thermal memory test verification)	-	0	Refer Sequence charges
8.2.1.5.2(Limits of operation of three-pole time-delay overload relays energized on two poles)	-	0	Refer Sequence charges
8.2.1.5.3(Limits of operation of instantaneous magnetic overload relays)	-	0	Refer Sequence charges
8.2.1.5.4(Limits of operation of under-current relays and releases for automatic change over)	-	0	Refer Sequence charges
8.2.1.5.4.1(Limits of operation of under-current relays)	-	0	Refer Sequence charges
8.2.1.5.4.2(Limits of operation of automatic change over by under-current relays)	-	0	Refer Sequence charges
8.2.2(Temperature-rise)	-	50000	-
8.2.2.3(Accessible parts)	-	0	Covered in main clause
8.2.2.4(Ambient air temperature)	-	0	Covered in main clause
8.2.2.5(Main circuit)	-	0	Covered in main clause
8.2.2.6(Control circuits)	-	0	Covered in main clause
8.2.2.7.1(Uninterrupted and eight-hour duty windings)	-	0	Covered in main clause
8.2.3(Dielectric properties)	-	40000	-
8.2.3.2(Voltage limiting components between circuits)	-	0	Covered in main clause
8.2.4.3.1(Mechanical durability)	-	300000	-
8.2.4.3.2(Electrical durability)	-	500000	-
8.2.4.4(Overload current withstand capability of contactors)	-	25000	-
8.2.4.5(Coil power consumption)	-	50000	-
8.2.4.6(Pole impedance)	-	50000	-
8.2.4.7(Ability of a MPSD to make and break under short-circuit conditions)	-	210000	-
8.2.5.1(Performance under short-circuit conditions)	-	210000	-
8.2.5.3(Co-ordination test between AC-3e rated starter and associated SCPD)	-	210000	-
8.2.5.4(Co-ordination between a MPSD and another short-circuit protective device)	-	210000	-
9.1.5.2(Environment tests)	-	300000	-
9.2.2(Electrical performance of screwless-type clamping units)	-	100000	-
9.2.4(Limited energy source test)	-	50000	-
9.2.5(Breakdown of components)	-	50000	-
9.2.5.2(Breakdown of components test)	-	0	Covered in main clause
9.3.3.2(Operating limits)	-	500000	-
9.3.3.2.1.2(Coil power consumption)	-	0	Covered in main clause
9.3.3.2.1.3(Pole impedance)	-	0	Covered in main clause
9.3.3.2.2(Relays and releases)	-	0	Covered in main clause
9.3.3.3.1(Ambient air temperature)	-	0	Covered in main clause
9.3.3.3.2(Measurement of the temperature of parts)	-	0	Covered in main clause
9.3.3.3.3(Temperature-rise of a part)	-	0	Covered in main clause
9.3.3.3.4(Temperature-rise of the main circuit)	-	0	Covered in main clause
9.3.3.3.5(Temperature-rise of control circuits)	-	0	Covered in main clause
9.3.3.3.6(Temperature-rise of coils and electromagnets)	-	0	Covered in main clause
9.3.3.3.7(Temperature-rise of auxiliary circuits)	-	0	Covered in main clause
9.3.3.3.8(Temperature-rise of starting resistors for rheostatic rotor starters)	-	0	Covered in main clause
9.3.3.6(Operational performance capability)	-	160000	-
9.3.4.2.2(prospective current)	-	0	Covered in main clause
9.3.4.2.3(Test at the rated conditional short-circuit current Iq)	-	2100000	-
9.3.5(Overload current withstand capability of contactors)	-	25000	-
9.3.6.2(Operation and operating limits)	-	0	Covered in main clause
9.3.6.3(Dielectric tests)	-	0	Covered in main clause
9.3.6.4(Mechanical operation tests of a MPSD)	-	0	Covered in main clause
F.7.2(Tests on products in a new condition)	-	0	Covered in main clause
F.7.3(Test after conventional operational performance)	-	0	Covered in main clause
H.3(Limits of operation of control functions)	-	0	Covered in main clause
H.4(Test of the control functions)	-	0	Covered in main clause
M.9.5(Climatic test)	-	0	Covered in main clause
8.2.4 of IEC 60947-1:2007 (Sequence 5)(Verification of Mechanical properties of terminals)	-	0	Covered in main clause
Annex C of IEC 60947-1:2007 (Sequence 5)(Verification of Degree of protection of enclosed contactors and starters)	-	0	Covered in main clause
M.9.11(Clearance and creepage distances)	-	0	-
N.3.2(Touch current measurement)	-	0	-
P.2.3(Verification of operational performance capability)	-	0	-
P.2.4.2(Test voltage)	-	0	-
P.2.4.3(Application of the test voltage)	-	0	-
Q.5.3(Selectivity determined by test)	-	0	-
9.2.3(Ageing test for screwless-type clamping unit)	-	25000	-
P.4(Test of MPSD for IT system)	-	210000	-
8.1.2(Materials)	-	20000	Manufacturer to provide declaration from supplier
8.1.2.1(General materials requirements)	-	0	-
8.1.2.2(Glow wire testing)	-	0	-
8.1.2.3(Test based on flammability category)	-	0	-
8.1.3(Current-carrying parts and their connections)	-	20000	-
8.1.4(Clearances and creepage distances)	-	25000	-
8.1.5.1(Insulation)	-	0	Covered in main clause.
8.1.5.2(Direction of movement)	-	0	Covered in main clause.
8.1.5.3(Mounting)	-	0	Covered in main clause.
8.1.5.4(Protection)	-	0	Covered in main clause.
8.1.8(Terminals)	-	25000	-
8.1.8.1(General)	-	0	Covered in main clause.
8.1.8.2(Terminal identification and marking)	-	0	Covered in main clause.
8.1.9(Additional requirements for equipment provided with a neutral pole)	-	0	Covered in main clause.
8.1.10(Provisions for protective earthing)	-	0	Covered in main clause.
8.1.11(Enclosures for equipment)	-	0	Covered in main clause.
8.1.11.1(Design)	-	0	Covered in main clause.
8.1.11.2(Insulation)	-	0	Covered in main clause.
8.1.12(Degrees of protection of enclosed equipment)	-	50000	-
8.1.13(Conduit pull-out, torque and bending with metallic conduits)	-	50000	-
8.1.14(Limited energy source)	-	50000	-
8.1.14.1(General)	-	0	Covered in main clause.
8.1.14.2(Limited energy source with galvanic separation)	-	0	Covered in main clause.
8.1.14.3(Limited energy source with current limiting impedance)	-	0	Covered in main clause.
8.1.15(Stored charge energy circuit)	-	50000	Covered in main clause.
8.1.16(Fault and abnormal conditions)	-	25000	-
8.1.17(Short-circuit and overload protection of ports)	-	25000	-
8.2(Performance requirements)	-	0	Refer Sequence charges
8.2.1(Operating conditions)	-	0	Refer Sequence charges
8.2.1.1.1(General conditions)	-	0	Refer Sequence charges
8.2.1.2(Limits of operation of contactors and power-operated starters)	-	0	Refer Sequence charges
8.2.1.3(Limits of operation of under-voltage relays and releases)	-	0	Refer Sequence charges
8.2.1.4(Limits of operation of shunt-coil operated releases (shunt trip))	-	0	Refer Sequence charges
8.2.1.5(Limits of operation of current sensing relays and releases)	-	500000	-
8.2.1.5.1(Limits of operation of time-delay overload relays when all poles are energized)	-	0	Refer Sequence charges
8.2.1.5.1.1(General tripping requirements of overload relays)	-	0	Refer Sequence charges
8.2.1.5.1.2(Thermal memory test verification)	-	0	Refer Sequence charges
8.2.1.5.2(Limits of operation of three-pole time-delay overload relays energized on two poles)	-	0	Refer Sequence charges
8.2.1.5.3(Limits of operation of instantaneous magnetic overload relays)	-	0	Refer Sequence charges
8.2.1.5.4(Limits of operation of under-current relays and releases for automatic change over)	-	0	Refer Sequence charges
8.2.1.5.4.1(Limits of operation of under-current relays)	-	0	Refer Sequence charges
8.2.1.5.4.2(Limits of operation of automatic change over by under-current relays)	-	0	Refer Sequence charges
8.2.2(Temperature-rise)	-	50000	-
8.2.2.3(Accessible parts)	-	0	Covered in main clause
8.2.2.4(Ambient air temperature)	-	0	Covered in main clause
8.2.2.5(Main circuit)	-	0	Covered in main clause
8.2.2.6(Control circuits)	-	0	Covered in main clause
8.2.2.7.1(Uninterrupted and eight-hour duty windings)	-	0	Covered in main clause
8.2.3(Dielectric properties)	-	40000	-
8.2.3.2(Voltage limiting components between circuits)	-	0	Covered in main clause
8.2.4.3.1(Mechanical durability)	-	300000	-
8.2.4.3.2(Electrical durability)	-	500000	-
8.2.4.4(Overload current withstand capability of contactors)	-	25000	-
8.2.4.5(Coil power consumption)	-	50000	-
8.2.4.6(Pole impedance)	-	50000	-
8.2.4.7(Ability of a MPSD to make and break under short-circuit conditions)	-	210000	-
8.2.5.1(Performance under short-circuit conditions)	-	210000	-
8.2.5.3(Co-ordination test between AC-3e rated starter and associated SCPD)	-	210000	-
8.2.5.4(Co-ordination between a MPSD and another short-circuit protective device)	-	210000	-
9.1.5.2(Environment tests)	-	300000	-
9.2.2(Electrical performance of screwless-type clamping units)	-	100000	-
9.2.4(Limited energy source test)	-	50000	-
9.2.5(Breakdown of components)	-	50000	-
9.2.5.2(Breakdown of components test)	-	0	Covered in main clause
9.3.3.2(Operating limits)	-	500000	-
9.3.3.2.1.2(Coil power consumption)	-	0	Covered in main clause
9.3.3.2.1.3(Pole impedance)	-	0	Covered in main clause
9.3.3.2.2(Relays and releases)	-	0	Covered in main clause
9.3.3.3.1(Ambient air temperature)	-	0	Covered in main clause
9.3.3.3.2(Measurement of the temperature of parts)	-	0	Covered in main clause
9.3.3.3.3(Temperature-rise of a part)	-	0	Covered in main clause
9.3.3.3.4(Temperature-rise of the main circuit)	-	0	Covered in main clause
9.3.3.3.5(Temperature-rise of control circuits)	-	0	Covered in main clause
9.3.3.3.6(Temperature-rise of coils and electromagnets)	-	0	Covered in main clause
9.3.3.3.7(Temperature-rise of auxiliary circuits)	-	0	Covered in main clause
9.3.3.3.8(Temperature-rise of starting resistors for rheostatic rotor starters)	-	0	Covered in main clause
9.3.3.6(Operational performance capability)	-	160000	-
9.3.4.2.2(prospective current)	-	0	Covered in main clause
9.3.4.2.3(Test at the rated conditional short-circuit current Iq)	-	210000	-
9.3.5(Overload current withstand capability of contactors)	-	25000	-
9.3.6.2(Operation and operating limits)	-	0	Covered in main clause
9.3.6.3(Dielectric tests)	-	0	Covered in main clause
9.3.6.4(Mechanical operation tests of a MPSD)	-	0	Covered in main clause
F.7.2(Tests on products in a new condition)	-	0	Covered in main clause
F.7.3(Test after conventional operational performance)	-	0	Covered in main clause
H.3(Limits of operation of control functions)	-	0	Covered in main clause
H.4(Test of the control functions)	-	0	Covered in main clause
M.9.5(Climatic test)	-	0	Covered in main clause
8.2.4 of IEC 60947-1:2007 (Sequence 5)(Verification of Mechanical properties of terminals)	-	0	Covered in main clause
Annex C of IEC 60947-1:2007 (Sequence 5)(Verification of Degree of protection of enclosed contactors and starters)	-	0	Covered in main clause
M.9.11(Clearance and creepage distances)	-	0	Covered in main clause
N.3.2(Touch current measurement)	-	0	Covered in main clause
P.2.3(Verification of operational performance capability)	-	0	Covered in main clause
P.2.4.2(Test voltage)	-	0	Covered in main clause
P.2.4.3(Application of the test voltage)	-	0	Covered in main clause
Q.5.3(Selectivity determined by test)	-	0	Covered in main clause
9.2.3(Ageing test for screwless-type clamping unit)	-	25000	-
P.4(Test of MPSD for IT system)	-	210000	-

07 Nov, 2026

-
Included w.e.f.09.12.2024 Exclusion CL M.8.3 (Electromagnetic compatibility (EMC)) CL 8.3 (Electromagnetic compatibility (EMC)) CL 8.3.2 (Immunity) CL CL 8.3.3 (Emission) CL 9.4.2 (Immunity) CL 9.4.2.2 (Electrostatic discharge) CL 9.4.2.3 (Radiated radio-frequency electromagnetic field) CL 9.4.2.4 (Conducted disturbances induced by radio-frequency fields) CL 9.4.2.5 (Electrical fast transient/bursts CL CL 9.4.2.6 (Surges) CL 9.4.2.7 (Power frequency magnetic field) CL 9.4.2.8 (Voltage dips and short-time interruptions) CL 9.4.2.9 (Harmonics in the supply) CL 9.4.3 (Emission) CL M.9.4 (Thermal cycling test) CL M.9.7 (Critical load current test) CL 8.1.2.2 (Glow wire testing) CL 8.1.2.3 (Test based on flammability category) CL 8.1.2.2 (Glow wire testing) CL 8.1.2.3 (Test based on flammability category) Seq I: Temperature rise upto 6300A Dielectric test 0-5kV power frequency & upto 18.5kV Impulse withstand Operating limits upto test current 10kA Seq II / III: Making and Breaking capabilities / Short circuit test upto 55kA @ 760V ac test voltage and 100ms duration max. Seq IV: Overload withstand upto test current 10kA Seq V: Mechanical properties of terminal - Yes IP1x to 7x, IPx1 to IPx6

8397

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY - CIPET, HALDIA

5116334

IS 7834 : Part 5 (1987)

Injection Moulded PVC Socket Fittings With Solvent Cement Joints for Water Supplies - Part 5 : Specific Requirements for 45 degree Tees

All SIzes

6563 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
table 1 sl.no: 01(16 (Z) )	-	0	-
table 1 sl.no: 02(20 (Z) )	-	0	-
table 1 sl.no: 03(25 (Z) )	-	0	-
table 1 sl.no: 04(32 (Z) )	-	0	-
table 1 sl.no: 05(40 (Z) )	-	0	-
table 1 sl.no: 06(50 (Z) )	-	0	-
table 1 sl.no: 07(63 (Z) )	-	0	-
table 1 sl.no: 08(75 (Z) )	-	0	-
table 1 sl.no: 09(90 (Z) )	-	0	-
table 1 sl.no: 10(110 (Z) )	-	0	-
table 1 sl.no: 11(125 (Z) )	-	0	-
table 1 sl.no: 12(140 (Z) )	-	0	-
table 1 sl.no: 13(160(z))	-	0	-
table 1 sl.no: 01(16 (Z1) )	-	0	-
table 1 sl.no: 02(20 (Z1) )	-	0	-
table 1 sl.no: 03(25 (Z1) )	-	0	-
table 1 sl.no: 04(32 (Z1) )	-	0	-
table 1 sl.no: 05(40 (Z1) )	-	0	-
table 1 sl.no: 06(50 (Z1) )	-	0	-
table 1 sl.no: 07(63 (Z1) )	-	0	-
table 1 sl.no: 08(75 (Z1) )	-	0	-
table 1 sl.no: 09(90 (Z) )	-	0	-
table 1 sl.no: 10(110 (Z1) )	-	0	-
table 1 sl.no: 11(125 (Z1) )	-	0	-
table 1 sl.no: 12(140 (Z1) )	-	0	-
table 1 sl.no: 13(160(z1))	-	0	-
2.1(General)	-	5250	(Test charges 5250 ) Discount of 25 % is applicable on total test charges only for BIS. 1. Opacity = 700 2. HPT = 850 3. Effect on water = 3000 4. Stress relief test = 700.
2.2(Manufacture)	-	0	-
2.2.2, Table 1(Size)	-	0	-
2.2.2, Table 1(45 ̊ Tees Laying Length, Z)	-	0	-
2.2.2, Table 1(45 ̊ Tees Laying Length, Z1)	-	0	-
2.2.3( inside diameter of the socket)	-	500	Discount of 25 % is applicable on total test charges only for BIS.
2.2.3(Socket length)	-	0	-
2.1(General)	-	0	-
2.2(Manufacture)	-	0	-
2.2.2, Table 1(Size)	-	0	-
2.2.2, Table 1(45 ̊ Tees Laying Length, Z)	-	0	-
2.2.2, Table 1(45 ̊ Tees Laying Length, Z1)	-	0	-
2.2.3( inside diameter of the socket)	-	0	-
2.2.3(Socket length)	-	0	-
6.1.1(VCM Content Test)	-	3000	Discount of 25 % is applicable on total test charges only for BIS.
2.2.2 table 1(Laying length)	-	0.01	-

14 Dec, 2027

-
Included.w.e.f.03.12.2024

8398

Astute Labs Pvt Ltd, Pune

7174321

IS/IEC 80601 : Part 2 : Sec 49 (2018)

Medical electrical equipment Part 2- Particular requirements for basic safety and essential performance- Sec 49 Multifunction patient monitors

500000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
201.5(General requirements for testing of ME EQUIPMENT)	-	30000	-
201.6(Classification Of ME equipment and ME systems)	-	30000	-
201.7(ME EQUIPMENT identification, marking and documents)	-	40000	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	50000	-
201.9(Protection against MECAHNICAL HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	30000	-
201.10(Protection against unwanted and excessive radiation HAZARDS)	-	30000	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	30000	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	60000	-
201.13(HAZARDOUS SITUATIONS and fault conditions)	-	40000	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS))	-	30000	-
201.15(Construction of ME EQUIPMENT)	-	40000	-
201.16(ME SYSTEMS)	-	30000	-
201.4(General requirements)	-	30000	-
208(General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems)	-	30000	-
201.5(General requirements for testing of ME EQUIPMENT)	-	0	-
201.6(Classification Of ME equipment and ME systems)	-	0	-
201.7(ME EQUIPMENT identification, marking and documents)	-	0	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	0	-
201.9(Protection against MECAHNICAL HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	0	-
201.10(Protection against unwanted and excessive radiation HAZARDS)	-	0	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	0	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	0	-
201.13(HAZARDOUS SITUATIONS and fault conditions)	-	0	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS))	-	0	-
201.15(Construction of ME EQUIPMENT)	-	0	-
201.16(ME SYSTEMS)	-	0	-
201.4(General requirements)	-	0	-
208(General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems)	-	0	-
201.5(General requirements for testing of ME EQUIPMENT)	-	0	-
201.6(Classification Of ME equipment and ME systems)	-	0	-
201.7(ME EQUIPMENT identification, marking and documents)	-	0	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	0	-
201.9(Protection against MECAHNICAL HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	0	-
201.10(Protection against unwanted and excessive radiation HAZARDS)	-	0	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	0	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	0	-
201.13(HAZARDOUS SITUATIONS and fault conditions)	-	0	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS))	-	0	-
201.15(Construction of ME EQUIPMENT)	-	0	-
201.16(ME SYSTEMS)	-	0	-
201.4(General requirements)	-	0	-
208(General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems)	-	0	-

05 Nov, 2029

-
Included w.e.f.17.03.2025 Exclusion Cl 201.17 (Electromagnetic compatibility of ME equipment and ME systems) Cl 202 (Electromagnetic disturbances-Requirements and tests)

8399

AADHAR TESTING SOLUTIONS LLP, GHAZIABAD

8185026

IS 3419 (1988)

Specification for fittings for rigid non - Metallic (Second Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8 & 5(Visual Examination -IS:3419)	-	500	25% Discount for BIS
6.2 & 9.1- Table-1, ii(Inside Diameter of Collar for Slip type cuplers -IS:3419)	-	200	25% Discount for BIS
6.2 & 9.1- Table-1, iii(Inside Diameter of Ridge for Slip type cuplers -IS:3419)	-	500	25% Discount for BIS
6.2 & 9.1- Table-1, iv(Minimum overall length for Slip type cuplers -IS:3419)	-	200	25% Discount for BIS
6.2 & 9.1- Table-1, v(Minimum wall thickness for Slip type cuplers -IS:3419)	-	500	25% Discount for BIS
6.2 & 9.1- Table-2, ii(Inside Diameter of Collar for Socketed type cuplers -IS:3419)	-	500	25% Discount for BIS
6.2 & 9.1- Table-2, iii(Inside Diameter of Ridge for Socketed type cuplers -IS:3419)	-	500	25% Discount for BIS
6.2 & 9.1- Table-2, iv(Minimum overall length (a) for Socketed type cuplers -IS:3419)	-	200	25% Discount for BIS
6.2 & 9.1- Table-2, v(Minimum overall length (l) for Socketed type cuplers -IS:3419)	-	200	25% Discount for BIS
6.2 & 9.1- Table-2, vi(Minimum wall thickness for Socketed type cuplers -IS:3419)	-	200	25% Discount for BIS
6.2 & 9.1- Table-3, ii(Inside Diameter of Collar(d6) for Clamp type cuplers -IS:3419)	-	500	25% Discount for BIS
6.2 & 9.1- Table-3, iii(Inside Diameter of Collar (d5) for Clamp type cuplers -IS:3419)	-	500	25% Discount for BIS
6.2 & 9.1- Table-3, iv(Inside Diameter of Ridge for Clamp type cuplers -IS:3419)	-	500	25% Discount for BIS
6.2 & 9.1- Table-3, iv(Minimum length for Clamp type cuplers -IS:3419)	-	200	25% Discount for BIS
6.2 & 9.1- Table-3, vi(Minimum wall thickness for Clamp type cuplers -IS:3419)	-	200	25% Discount for BIS
6.2 & 9.1- Table-4, ii(Outside Dameter of Normal type bend -IS:3419)	-	200	25% Discount for BIS
6.2 & 9.1- Table-4, iii(Minimum Inside Diameter of Normal Type Bend -IS:3419)	-	200	25% Discount for BIS
6.2 & 9.1- Table-4, iv(Radious(R) of Normal Type Bend -IS:3419)	-	200	25% Discount for BIS
6.2 & 9.1- Table-4, v(Length (l1) of Normal Type Bend -IS:3419)	-	200	25% Discount for BIS
6.2 & 9.1- Table-5, ii(Outside Dameter of Slip type cupling bend -IS:3419)	-	200	25% Discount for BIS
6.2 & 9.1- Table-5, iii(Minimum Inside Diameter of Slip type cupling bend -IS:3419)	-	200	25% Discount for BIS
6.2 & 9.1- Table-5, iv(Inside Diameter of collar for Slip type cupling bend -IS:3419)	-	200	25% Discount for BIS
6.2 & 9.1- Table-5, v(R- for Slip type cupling bend -IS:3419)	-	200	25% Discount for BIS
6.2 & 9.1- Table-5, vi(Y- for Slip type cupling bend -IS:3419)	-	200	25% Discount for BIS
6.2 & 9.1- Table-5, vii(l2- for Slip type cupling bend -IS:3419)	-	200	25% Discount for BIS
6.2 & 9.1- Table-6, ii(Inside Diameter of collar for Normal type Elbows -IS:3419)	-	200	25% Discount for BIS
6.2 & 9.1- Table-6, iii(Length (l) of Normal Type Elbows -IS:3419)	-	200	25% Discount for BIS
6.2 & 9.1- Table-6, iv(Radious(r) of Normal Type Elbows -IS:3419)	-	200	25% Discount for BIS
6.2 & 9.1- Table-6, v(Minimum wall thicknes of Elbows -IS:3419)	-	500	25% Discount for BIS
6.2 & 9.1- Table-7, ii(Inside Diameter of Collear for Normal type Tees -IS:3419)	-	200	25% Discount for BIS
6.2 & 9.1- Table-7, iii(Length (l) of Normal type Tees -IS:3419)	-	200	25% Discount for BIS
6.2 & 9.1- Table-7, iv(Radious(r) of Normal type Tees -IS:3419)	-	200	25% Discount for BIS
6.2 & 9.1- Table-7, v( Minimum wall thicknes of Normal type Tees -IS:3419)	-	200	25% Discount for BIS
6.2 & 9.1- Table-8, ii(Inside Diameter of Collear for socketed type Tees - IS:3419)	-	200	25% Discount for BIS
6.2 & 9.1- Table-8, iii(a - of socketed type Tees -IS:3419)	-	200	25% Discount for BIS
6.2 & 9.1- Table-8, iv(l - of socketed type Tees -IS:3419)	-	200	25% Discount for BIS
6.2 & 9.1- Table-8, v(Minimum wall thicknes of socketed type Tees -IS:3419)	-	200	25% Discount for BIS
6.2 & 9.1- Table-9, ii(B - of spout Type Circular Boxes -IS:3419)	-	200	25% Discount for BIS
6.2 & 9.1- Table-9, iii(C - of spout Type Circular Boxes -IS:3419)	-	200	25% Discount for BIS
6.2 & 9.1- Table-9, iv(D - of spout Type Circular Boxes -IS:3419)	-	200	25% Discount for BIS
6.2 & 9.1- Table-9, v(E - of spout Type Circular Boxes -IS:3419)	-	200	25% Discount for BIS
6.2 & 9.1- Table-9, vi(F(Max) - of spout Type Circular Boxes -IS:3419)	-	200	25% Discount for BIS
6.2 & 9.1- Table-9, vii(F(Min) - of spout Type Circular Boxes -IS:3419)	-	200	25% Discount for BIS
6.2 & 9.1- Table-9, viii(G - of spout Type Circular Boxes -IS:3419)	-	200	25% Discount for BIS
6.2 & 9.1- Table-9, ix(t - of spout Type Circular Boxes -IS:3419)	-	200	25% Discount for BIS
10(Resistance to Heat -IS:3419)	-	1000	25% Discount for BIS
11(Resistance to Burning - IS 3419)	-	1000	25% Discount for BIS
12(Moisture Absorption - IS 3419)	-	500	25% Discount for BIS
13.2 &13.3(Resistance to chemival action in Acid solution - IS 3419)	-	1500	25% Discount for BIS
13.2 &13.3(Resistance to chemival action in Alkaline solution - IS 3419)	-	1500	25% Discount for BIS
14.1(Copper Test - IS 3419)	-	1000	25% Discount for BIS
15, 15.3(Resistance to Oil - IS 3419)	-	1000	25% Discount for BIS
15,15.4(Resistance to Oil - IS 3419)	-	1000	25% Discount for BIS
16- Appendix-A(Resistance to Impact -IS 3419)	-	500	25% Discount for BIS
17.2(Electric Strength - IS 3419)	-	500	25% Discount for BIS
17.3(Insulation Resistance - IS 3419)	-	500	25% Discount for BIS
Cl.7.1(Marking)	-	500	25% Discount for BIS
Cl.7.1(Construction)	-	250	25% Discount for BIS
Cl. 5(Construction)	-	250	25% Discount for BIS
Cl. 5(Construction)	-	250	25% Discount for BIS
Cl.5.3(Construction)	-	250	25% Discount for BIS
Cl.5.3(Construction)	-	250	25% Discount for BIS
(Cl.6) Table 9(Dimensions A)	-	500	25% Discount for BIS
(Cl.6) Table 9(Dimensions B)	-	500	25% Discount for BIS
(Cl.6) Table 9(Dimensions C)	-	500	25% Discount for BIS
(Cl.6) Table 9(Dimensions D)	-	500	25% Discount for BIS
(Cl.6) Table 9(Dimensions E)	-	500	25% Discount for BIS
(Cl.6) Table 9(Dimensions F)	-	50	25% Discount for BIS
(Cl.6) Table 9(Dimensions G)	-	500	25% Discount for BIS
(Cl.6) Table 9(Dimensions t)	-	500	25% Discount for BIS
Cl. 10(Resistance to Heat)	-	1000	25% Discount for BIS
Cl. 11(Resistance to Burning)	-	500	25% Discount for BIS
Cl. 12(Moisture Absorption Test)	-	500	25% Discount for BIS
Cl.13(Resistance to Chemical Action)	-	1500	25% Discount for BIS
Cl.14(Copper Test)	-	1000	25% Discount for BIS
Cl. 15(Resistance to Oil)	-	1000	25% Discount for BIS
Cl. 15(Resistance to Oil)	-	1000	25% Discount for BIS

01 May, 2028

-
-

8400

AADHAR TESTING SOLUTIONS LLP, GHAZIABAD

8185026

IS 9537 : Part 2 (1981)

Specification for conduits for electrical installations: Part 2 rigid steel conduits

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Marking, IS 9537-2)	-	500	25% Discount for BIS
6.1(Marking, IS 9537-2)	-	500	25% Discount for BIS
6.1(Marking, IS 9537-2)	-	500	25% Discount for BIS
6.3(Marking, Cl. 6.4 of IS 9537-1)	-	500	25% Discount for BIS
6.2(Marking, IS 9537-2)	-	500	25% Discount for BIS
7.2.1(Dimensions, (Minimum outside Diameter), IS 9537-2)	-	500	25% Discount for BIS
7.2.2(Dimensions (Maximum outside Diameter), IS 9537-2)	-	500	25% Discount for BIS
7.3(Dimensions (Wall thickness), IS 9537-2)	-	500	25% Discount for BIS
7.3.3(Uniformity of wall thickness, IS 9537-2)	-	500	25% Discount for BIS
7.4(Screw threads, IS 9537-2)	-	500	25% Discount for BIS
8.1(Construction, Cl. 8 of IS 9537-1)	-	250	25% Discount for BIS
8.2(Construction, IS 9537-2)	-	250	25% Discount for BIS
9.2(Mechanical Properties (Bending test), Cl. 9.3 of IS 9537-1)	-	1000	25% Discount for BIS
9.3(Mechanical Properties (Compression Test), IS 9537-2)	-	1500	25% Discount for BIS
13(External Influences, IS 9537-2)	-	500	25% Discount for BIS
Cl 13.4.5(External Influence ( Outside tube))	-	500	25% Discount for BIS
Cl 13.4.6(External Influence ( Inside tube))	-	500	25% Discount for BIS
7.1(Dimensions)	-	500	25% Discount for BIS

01 May, 2028

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number