BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15471 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

8401

Aaditech Test and Calibration Lab LLP

8179926

IS 3854 (2023)

Switches for Domestic and Similar Purposes - Specification (Third Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General Requirements)	-	500	-
Cl-5(General notes on tests)	-	500	-
Cl-6(Rating)	-	500	-
Cl-8(Marking)	-	700	-
Cl-9(Checking of dimensions)	-	700	-
Cl-10.1, 10.2(Prevention of Access to Live Parts)	-	500	-
Cl-10.3(Requirements for Accessible Metal Parts)	-	500	-
Cl-10.4(Requirements for Insulation of the Mechanism)	-	500	-
Cl. 10.5(Requirements for Insulation of the Mechanism with Respect to the Surrounding Environment)	-	500	-
Cl-10.6(Requirements for Switches Operated Indirectly)	-	500	-
Cl-10.7(Requirements for Switches with Replaceable Pull Cord)	-	500	-
Cl-11(Provision for earthing)	-	1000	-
Cl-12(Terminals)	-	1000	-
Cl-13(Constructional requirements)	-	1500	-
Cl-14(Mechanism)	-	1000	-
Cl-15.1(Resistance to Ageing)	-	2000	-
Cl-15.2(Protection Provided by Enclosures of Switches)	-	1000	-
Cl-15.3(Resistance to Humidity)	-	1500	-
Cl-16.1(General)	-	500	-
Cl-16.2(Test for Measuring the Insulation Resistance)	-	1000	-
Cl-16.3(Electric Strength Test)	-	1000	-
Cl-17(Temperature rise)	-	1500	-
Cl-18(Making and breaking capacity)	-	1000	-
Cl-19(Normal operation)	-	1500	-
Cl-20(Mechanical strength)	-	1000	-
Cl-21(Resistance to heat)	-	1000	-
Cl-22(Screws, current carrying parts and connections)	-	1000	-
Cl-23(Creepage distances, clearances and distance through sealing compound)	-	700	-
Cl-24.1(Resistance to abnormal heat and fire)	-	1500	-
Cl-24.2(Resistance to tracking)	-	1500	-
Cl-25(Resistance to rusting)	-	1000	-
19.1(Test for Switches Intended for Inductive Loads)	-	1000	-
19.2(Test for Switches Intended for Externally Ballasted Lamp Loads)	-	1000	-
19.3(Test for Switches Intended for Self-ballasted Lamp Loads)	-	1000	-
13.5(Attachment of knobs)	-	1500	-
12.3.11(Table 11)(Test Current for the Verification of Electrical and Thermal Stresses in Normal Use of Screwless Terminals)	-	1000	-
12.3.12(Table 13)(Deflection Test Forces)	-	1000	-
Cl-7(Classification)	-	500	-
Cl-4(General Requirements)	-	500	-
Cl-5(General notes on tests)	-	0	-
Cl-6(Rating)	-	500	-
Cl-8(Marking)	-	700	-
Cl-9(Checking of dimensions)	-	700	-
Cl-10.1, 10.2(Prevention of Access to Live Parts)	-	500	-
Cl-10.3(Requirements for Accessible Metal Parts)	-	500	-
Cl-10.4(Requirements for Insulation of the Mechanism)	-	500	-
Cl. 10.5(Requirements for Insulation of the Mechanism with Respect to the Surrounding Environment)	-	500	-
Cl-10.6(Requirements for Switches Operated Indirectly)	-	500	-
Cl-10.7(Requirements for Switches with Replaceable Pull Cord)	-	500	-
Cl-11(Provision for earthing)	-	1000	-
Cl-12(Terminals)	-	1000	-
Cl-13(Constructional requirements)	-	1500	-
Cl-14(Mechanism)	-	1000	-
Cl-15.1(Resistance to Ageing)	-	2000	-
Cl-15.2(Protection Provided by Enclosures of Switches)	-	1000	-
Cl-15.3(Resistance to Humidity)	-	1500	-
Cl-16.1(General)	-	500	-
Cl-16.2(Test for Measuring the Insulation Resistance)	-	1000	-
Cl-16.3(Electric Strength Test)	-	1000	-
Cl-17(Temperature rise)	-	1500	-
Cl-18(Making and breaking capacity)	-	1000	-
Cl-19(Normal operation)	-	1500	-
Cl-20(Mechanical strength)	-	1000	-
Cl-21(Resistance to heat)	-	1000	-
Cl-22(Screws, current carrying parts and connections)	-	1000	-
Cl-23(Creepage distances, clearances and distance through sealing compound)	-	700	-
Cl-24.1(Resistance to abnormal heat and fire)	-	1500	-
Cl-24.2(Resistance to tracking)	-	1500	-
Cl-25(Resistance to rusting)	-	1000	-
19.1(Test for Switches Intended for Inductive Loads)	-	1000	-
19.2(Test for Switches Intended for Externally Ballasted Lamp Loads)	-	1000	-
19.3(Test for Switches Intended for Self-ballasted Lamp Loads)	-	1000	-
13.5(Attachment of knobs)	-	1500	-
12.3.11(Table 11)(Test Current for the Verification of Electrical and Thermal Stresses in Normal Use of Screwless Terminals)	-	1000	-
12.3.12(Table 13)(Deflection Test Forces)	-	1000	-
Cl-7(Classification)	-	500	-
Cl-4(General Requirements)	-	0	-
Cl-5(General notes on tests)	-	0	-
Cl-6(Rating)	-	0	-
Cl-8(Marking)	-	0	-
Cl-9(Checking of dimensions)	-	0	-
Cl-10.1, 10.2(Prevention of Access to Live Parts)	-	0	-
Cl-10.3(Requirements for Accessible Metal Parts)	-	0	-
Cl-10.4(Requirements for Insulation of the Mechanism)	-	0	-
Cl. 10.5(Requirements for Insulation of the Mechanism with Respect to the Surrounding Environment)	-	0	-
Cl-10.6(Requirements for Switches Operated Indirectly)	-	0	-
Cl-10.7(Requirements for Switches with Replaceable Pull Cord)	-	0	-
Cl-11(Provision for earthing)	-	0	-
Cl-12(Terminals)	-	0	-
Cl-13(Constructional requirements)	-	0	-
Cl-14(Mechanism)	-	0	-
Cl-15.1(Resistance to Ageing)	-	0	-
Cl-15.2(Protection Provided by Enclosures of Switches)	-	0	-
Cl-15.3(Resistance to Humidity)	-	0	-
Cl-16.1(General)	-	0	-
Cl-16.2(Test for Measuring the Insulation Resistance)	-	0	-
Cl-16.3(Electric Strength Test)	-	0	-
Cl-17(Temperature rise)	-	0	-
Cl-18(Making and breaking capacity)	-	0	-
Cl-19(Normal operation)	-	0	-
Cl-20(Mechanical strength)	-	0	-
Cl-21(Resistance to heat)	-	0	-
Cl-22(Screws, current carrying parts and connections)	-	0	-
Cl-23(Creepage distances, clearances and distance through sealing compound)	-	0	-
Cl-24.1(Resistance to abnormal heat and fire)	-	0	-
Cl-24.2(Resistance to tracking)	-	0	-
Cl-25(Resistance to rusting)	-	0	-
19.1(Test for Switches Intended for Inductive Loads)	-	0	-
19.2(Test for Switches Intended for Externally Ballasted Lamp Loads)	-	0	-
19.3(Test for Switches Intended for Self-ballasted Lamp Loads)	-	0	-
13.5(Attachment of knobs)	-	0	-
12.3.11(Table 11)(Test Current for the Verification of Electrical and Thermal Stresses in Normal Use of Screwless Terminals)	-	0	-
12.3.12(Table 13)(Deflection Test Forces)	-	0	-
Cl-7(Classification)	-	0	-
Cl-4(General Requirements)	-	0	-
Cl-5(General notes on tests)	-	0	-
Cl-6(Rating)	-	0	-
Cl-8(Marking)	-	0	-
Cl-9(Checking of dimensions)	-	0	-
Cl-10.1, 10.2(Prevention of Access to Live Parts)	-	0	-
Cl-10.3(Requirements for Accessible Metal Parts)	-	0	-
Cl-10.4(Requirements for Insulation of the Mechanism)	-	0	-
Cl. 10.5(Requirements for Insulation of the Mechanism with Respect to the Surrounding Environment)	-	0	-
Cl-10.6(Requirements for Switches Operated Indirectly)	-	0	-
Cl-10.7(Requirements for Switches with Replaceable Pull Cord)	-	0	-
Cl-11(Provision for earthing)	-	0	-
Cl-12(Terminals)	-	0	-
Cl-13(Constructional requirements)	-	0	-
Cl-14(Mechanism)	-	0	-
Cl-15.1(Resistance to Ageing)	-	0	-
Cl-15.2(Protection Provided by Enclosures of Switches)	-	0	-
Cl-15.3(Resistance to Humidity)	-	0	-
Cl-16.1(General)	-	0	-
Cl-16.2(Test for Measuring the Insulation Resistance)	-	0	-
Cl-16.3(Electric Strength Test)	-	0	-
Cl-17(Temperature rise)	-	0	-
Cl-18(Making and breaking capacity)	-	0	-
Cl-19(Normal operation)	-	0	-
Cl-20(Mechanical strength)	-	0	-
Cl-21(Resistance to heat)	-	0	-
Cl-22(Screws, current carrying parts and connections)	-	0	-
Cl-23(Creepage distances, clearances and distance through sealing compound)	-	0	-
Cl-24.1(Resistance to abnormal heat and fire)	-	0	-
Cl-24.2(Resistance to tracking)	-	0	-
Cl-25(Resistance to rusting)	-	0	-
19.1(Test for Switches Intended for Inductive Loads)	-	0	-
19.2(Test for Switches Intended for Externally Ballasted Lamp Loads)	-	0	-
19.3(Test for Switches Intended for Self-ballasted Lamp Loads)	-	0	-
13.5(Attachment of knobs)	-	0	-
12.3.11(Table 11)(Test Current for the Verification of Electrical and Thermal Stresses in Normal Use of Screwless Terminals)	-	0	-
12.3.12(Table 13)(Deflection Test Forces)	-	0	-
Cl-7(Classification)	-	0	-

-
-

8402

Atmy Analytical Labs Pvt. Ltd., Faridabad

8167506

IS 1171 (2011)

Ferromanganese - Specification (Fifth Revision)

14900 View breakup
-

Clause No.	Exclusion	Remark
Clause-4(Grades)	-	-
Clause-6(Supply of Materials)	-	-
Clause-7.1(Constitution of Consignment)	-	-
Clause-7, Table-1, S.No-3(Mn)	-	-
Clause-7.2.1,Table-1, S.No-4(C)	-	-
Clause-7.2.1, Table-1, S.No-5(Si Max)	-	-
Clause-7.2.1,Table-1, S.No-6(S Max)	-	-
Clause-7.2.1,Table-1, S.No-7(P Max)	-	-
Clause-8(Size Range)	-	-
Clause-12(Marking)	-	-

25 Feb, 2027

-
-

8403

WELL TECH TEST AND RESEARCH CENTER, DERABASSI

9177306

IS 7092 : Part 1 (1992)

Aluminium alloy tubes for irrigation purposes - Specification: Part 1 welded tubes (Second Revision)

WELDED TUBES AS PER TABLE 1

17000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10(Marking)	-	1000	-
5(Workmanship and Finish)	-	1000	-
8(Dimensions)	-	3000	-
7.2(Mechanical properties)	-	5000	-
7.3(Flattening test)	-	3000	-
7.4(Hydrostatic test)	-	4000	-
10(Marking)	-	0	TEST FACILITY FOR CHEMICAL ANALYSIS IS AVAILABLE AND TESTING CHARGES ARE 3500/-
5(Workmanship and Finish)	-	0	-
8(Dimensions)	-	0	-
7.2(Mechanical properties)	-	0	-
7.3(Flattening test)	-	0	-
7.4(Hydrostatic test)	-	0	-

30 Mar, 2027

-
Included w.e.f 07.01.2025

8404

SGS India Private Limited-Multilaboratory, Chennai

6114716

IS 14543 (2024)

Packaged Drinking Water Other than Packaged Natural Mineral Water Specification Third Revision

15250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.3(Appearance)	-	0	-
5.4/Annex D/i(P,P-DDT)	-	0	-
5.4/Annex D/ii(Lindane)	-	0	-
5.4/Annex D/iv(b-Endosulfan)	-	0	-
5.4/Annex D/xvi(Dieldrin)	-	0	-
5.4/Annex D/xvi(Aldrin)	-	0	-
5.4/Annex D/i(O,P-DDT)	-	0	-
5.4/Annex D/iv(a-Endosulfan)	-	0	-
5.4/Annex D/iii(d-HCH)	-	0	-
5.4/Annex D/i(O,P-DDD)	-	0	-
5.4/Annex D/i(P,P-DDE)	-	0	-
5.4/Annex D/iii(a-HCH)	-	0	-
5.4/Annex D/iii(β- HCH)	-	0	-
5.4/Annex D/iv(Endosulfan sulfate)	-	0	-
5.4/Annex D/i(P,P-DDD)	-	0	-
5.4/Annex D/xii(Alachlor)	-	0	-
5.4/Annex D/vii(Chlorpyrifos)	-	0	-
5.4/Annex D/x(Butachlor)	-	0	-
5.4/Annex D/vi(Ethion)	-	0	-
5.4/Annex D/xiv(Methyl parathion)	-	0	-
5.4/Annex D/xv(Malathion)	-	0	-
5.4/Annex D/viii(Phorate)	-	0	-
5.4/Annex D/v(Monochrotophos)	-	0	-
5.4/Annex D/xiii(Atrazine)	-	0	-
5.4/Annex D/viii(Phorate sulphoxide)	-	0	-
5.4/Annex D/viii(Phorate sulfone)	-	0	-
5.4/Annex D/xxvii(Methyl paraoxon)	-	0	-
5.4/Annex D/xxviii(Malaoxon)	-	0	-
5.4/Annex D/xi(Isoproturon)	-	0	-
5.4/Annex D/ix(2,4 –D)	-	0	-
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	300	-
Cl-5.2.2(Coliform)	-	150	-
Cl-5.2.3(Staphylococcus aureus)	-	375	-
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	150	-
Cl-5.2.5(Pseudomonas Aeruginosa)	-	300	-
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	150	-
Cl-5.2.7(Yeast and mould)	-	150	-
Cl-5.2.8(Salmonella)	-	675.99	-
Cl-5.2.9(Vibrio cholera)	-	450	-
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	75	-
Cl-5.3, Table-1 (ii)(Odour)	-	37.5	-
Cl-5.3, Table-1 (iii)(Taste)	-	37.5	-
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	37.5	-
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	75	-
Cl-5.3, Table-1 (vi)(pH)	-	37.5	-
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	150	-
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	75	-
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	75	-
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	75	-
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	300	-
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	225	-
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	150	-
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	75	-
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	75	-
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	75	-
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	75	-
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	150	-
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	150	-
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	75	-
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	75	-
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	75	-
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	75	-
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	75	-
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	300	-
Cl-5.3, Table-2 (xx)(Mineral oil)	-	75	-
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	375	-
Cl-5.3, Table-2 (xxii)(Sulphide)	-	150	-
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	149.99	-
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	150	-
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	2500	-
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	150	-
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	150	-
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	150	-
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	75	-
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	150	-
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	75	-
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	75	-
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	300	-
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	450	-
Cl-5.3, Table-3 (x)(Uranium)	-	750	-
Cl-5.2.3(Faecal streptococci)	-	0	-
Cl-5.2.8(shigella)	-	0	-
Cl-5.2.9(V.parahaemolyticus)	-	0	-
5.2.6(Aerobic Microbial Count @ 20 to 22 deg C)	-	0	-
5.4 i)(Dieldrin)	-	0	-
5.4 i)(Aldrin)	-	0	-
5.4 i)(Malathion)	-	0	-
5.4, i)("oxygen analogue of Malathion (Malaoxon)")	-	0	-
5.4 i)(Methyl Paraoxon)	-	0	-
5.4 i)(Methyl Parathion)	-	0	-
5.4 i)(Atrazine)	-	0	-
5.4 i)(Alachlor)	-	0	-
5.4 i)(Isoproturon)	-	0	-
5.4 i)(Butachlor)	-	0	-
5.4 i)(2,4-D)	-	0	-
5.4 i)(Phorate sulphone)	-	0	-
5.4 i)(Phorate sulphoxide)	-	0	-
5.4 i)(Phorate)	-	0	-
5.4 i)(Chlorpyrifos)	-	0	-
5.4 i)(Ethion)	-	0	-
5.4 i)(Monocrotophos)	-	0	-
5.4 i)(Endosulfan Sulphate)	-	0	-
5.4 i)(beta-Endosulfan)	-	0	-
5.4 i)(alpha-Endosulfan)	-	0	-
5.4 i)(Delta-HCH)	-	0	-
5.4 i)(beta-HCH)	-	0	-
5.4 i)(alpha-HCH)	-	0	-
5.4 i)(Gamma-HCH (Lindane))	-	0	-
5.4 i)(p,p DDD)	-	0	-
5.4 i)(o,p DDD)	-	0	-
5.4 i)(p,p DDE)	-	0	-
5.4, i)(o,p DDE)	-	0	-
5.4 i)(p,p DDT)	-	0	-
5.4 i)(o,p DDT)	-	0	-
Table 3, x)(Uranium)	-	750	-
Cl-5.1(General Requirements)	-	0	-
Cl-5.4 (i)(Pesticide residues considered individually)	-	0	-
Cl-5.4 (ii)(Total pesticide residue)	-	2775	-
5.4/Annex D/i(O,P-DDE)	-	0	-

14 Feb, 2028

-
Included w.e.f 30.04.2025 Exclusion: Cl-5.3, Table-4 (i) (Alpha emitters, Becquerel (Bq/l)), Cl-5.3, Table-4 (ii) (Beta emitters, Becquerel (Bq/l),)

8405

Atmy Analytical Labs Pvt. Ltd., Faridabad

8167506

IS 14261 (1995)

Transmission devices - V - Belts endless narrowv - Belts for industrial use - Specification

16500 View breakup
-

Clause No.	Exclusion	Remark
Cl 4(Material And Workmanship)	-	-
Cl 5.1(Cross-Section Dimensions)	-	-
Cl 5.2(Cross-Section Dimensions)	-	-
Cl 6(DESIGNATION)	-	-
Cl 7(Length Measurement And Tolerances)	-	-
Cl 7.2.1(Determination of Pitch Length)	-	-
Cl 7.2.2(Determination of Pitch Length)	-	-
Cl 7.2.3(Determination of Pitch Length)	-	-
Cl 7.3(Matched Belts)	-	-

25 Feb, 2027

-
-

8406

International Testing Centre, MSME Technology Development Centre, Meerut

8177804

IS 15844 : Part 3 (2024)

Sports Footwear Part 3 Professional Sports Footwear

55000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6(Size and Fittings)	-	300	-
Cl-5(Design)	-	300	-
Cl-6(Size and Fittings)	-	300	-
Cl.7.1.1(Upper to Mid Sole/Out Sole, Upper to Composite Sole (Applicable Only When the Sole is Composite) and Out Sole to Mid Sole (Multilayer, if Present), Bond Performance)	-	500	-
Cl.7.1.2(Energy Absorption at Seat Region)	-	500	-
Cl.7.1.1(Upper to Mid Sole/Out Sole, Upper to Composite Sole (Applicable Only When the Sole is Composite) and Out Sole to Mid Sole (Multilayer, if Present), Bond Performance)	-	300	-
Cl.7.1.2(Energy Absorption at Seat Region)	-	500	-
Cl.7.1.3(Complete Shoe Flexing)	-	1000	-
Cl.7.1.4(Washability)	-	500	-
Cl.7.1.5(Slip Resistance)	-	1500	-
Cl.7.1.6(Heel Drop)	-	300	-
Cl.7.2 Table-2 S.No- (ii)(Tear strength (average force), N, Min)	-	500	-
Cl.7.2 Table-2 S.No- (i)("Flexing resistance, Min a) Dry condition b) Wet condition")	-	1000	-
Cl.7.2 Table-2 S.No- (iii)("Colour fastness rubbing a-Dry b-Wet")	-	500	-
Cl.7.2 Table-2 S.No- (iv)("a) Water vapour permeability b) Water vapour coefficient")	-	1000	-
Cl.7.2 Table-2 S.No- (v)(Stitch tear strength N/mm, Min)	-	500	-
Cl.7.2 Table-2 S.No- (vi)(Colour fastness to light grey scale rate)	-	500	-
Cl.7.2 Table-2 S.No- (vii)(Tensile strength)	-	500	-
Cl.7.2 Table-2 S.No- (viii)(Elongation at break, percent)	-	500	-
Cl.7.2 Table-2 S.No- (ix)("Abrasion test a) Dry b) Wet")	-	1000	-
Cl.7.2 Table-3 S.No- (i)(Breaking strength, N/mm, Min)	-	500	-
Cl.7.2 Table-3 S.No- (ii)(Elongation at break, percent, Min)	-	500	-
Cl.7.2 Table-3 S.No- (iii)(Tear strength, N, Min)	-	500	-
Cl.7.2 Table-3 S.No- (iv)(Strength at needle perforation)	-	500	-
Cl.7.2 Table-3 S.No- (v)("Flexing resistance a-Dry condition, b) Wet condition")	-	800	-
Cl.7.2 Table-3 S.No- (vi)("a) Water vapour permeability b) Water vapour coefficient")	-	1000	-
Cl.7.2 Table-3 S.No- (vii)(Hydrolysis resistance)	-	500	-
Cl.7.2 Table-3 S.No- (viii)(Colour fastness to light grey scale rate)	-	500	-
Cl.7.2 Table-3 S.No- (ix)(Bursting strength)	-	500	-
Cl.7.3 Table-4 S.No- (i)(Tear strength, N, Min)	-	500	-
Cl.7.3 Table-4 S.No- (ii)("Abrasion resistance, a) Dry b) Wet ")	-	800	-
Cl.7.3 Table-4 S.No- (iii)(Colour fastness to rubbing, grey scale rate with 10 rubs on dry or wet, Min)	-	500	-
Cl.7.3 Table-4 S.No- (iv)(Colour fastness to perspiration (contact method) grey scale rate, Min)	-	500	-
Cl.7.3 Table-4 S.No- (v)("a-Water vapour permeability b-Water vapour coefficient")	-	500	-
Cl.7.4 Table-5 S.No- (ii)(Abrasion resistance)	-	800	-
Cl.7.4 Table-5 S.No- (iii)("a) Water absorption b) Water desorption")	-	800	-
Cl.7.5 Table-6 S.No- (i)("Abrasion resistance a) Dry condition b) Wet condition")	-	800	-
Cl.7.5 Table-6 S.No- (ii)("a) Water absorption b) Water desorption")	-	1000	-
Cl.7.5 Table-6 S.No- (iii)(Heat resistance shrinkage linear, percent, Max)	-	500	-
Cl.7.6 Table-7 S.No- (i)(Abrasion resistance)	-	500	-
Cl.7.6 Table-7 S.No- (ii)("Flexing resistance a) Bennewart Method b) Ross flexing method")	-	1000	-
Cl.7.6 Table-7 S.No- (iii)(Hydrolysis resistance)	-	2000	-
Cl.7.6 Table-7 S.No- (iv)(Tear strength, N/mm, Min)	-	500	-
Cl.7.6 Table-7 S.No- (v)(Tensile strength)	-	500	-
Cl.7.6 Table-7 S.No- (vi)(Elongation at break percent, Min)	-	500	-
Cl.7.6 Table-7 S.No- (vii)(Compression set percent, Max)	-	800	-
Cl.7.7 Table-8 S.No- (i)("Compression set, percent, Max a) For EVA b) For all other material")	-	800	-
Cl.7.7 Table-8 S.No- (ii)(Split tear strength)	-	500	-
Cl.7.7 Table-8 S.No- (iii)(Heat shrinkage, percent, Ma)	-	1000	-
Cl.7.7 Table-8 S.No- (iv)(Elongation at break, percent, Min)	-	500	-
Cl.7.8 Table-9 S.No- (i)(First dry collapsing load, hardness, N, Min)	-	1000	-
Cl.7.8 Table-9 S.No- (ii)(Resilience, percent, Min)	-	500	-
Cl.7.8 Table-9 S.No- (iii)(Moisture resistance, percent, Min)	-	1700	-
Cl.7.8 Table-9 S.No- (v)(Peel strength, N/nm, Min)	-	500	-
Cl.7.9 Table-10 S.No- (i)("Peel strength, N/mm, Min a) Initial b) After 5 000 wear cycles")	-	500	-
Cl.7.9 Table-10 S.No- (ii)("Shear strength, kPa, Min a) Initial b) After 5 000 wear cycles")	-	500	-
Cl.7.10 Table-11 S.No- (i)(Limit of useful extension, percent, Min)	-	500	-
Cl.7.10 Table-11 S.No- (ii)(Needle strength, N/mm, Min)	-	500	-
Cl.7.11 Table-12 S.No- (i)(Breaking strength of lace)	-	500	-
Cl.7.11 Table-12 S.No- (ii)(Lace tag strength)	-	500	-
Cl.7.11 Table-12 S.No- (iii)(Lace to lace abrasion)	-	500	-
Cl.7.11 Table-12 S.No- (iv)(Colour fastness to water (for lace) (Contact method))	-	500	-
Cl.7.11 Table-12 S.No- (v)(Strength of buckle/ski hook/D-ring,)	-	500	-
Cl.7.11 Table-12 S.No- (vi)("Corrosion resistance (applicable for all including decorative metal part) ")	-	500	-
Cl.7.11 Table-13 S.No- (i)(Corrosion resistance (applicable for metallic spikes))	-	500	-
Cl-7.12.1, Table no. 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	3000	-
Cl-7.12.1, Table no. 1 of IS 17011,(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Cl-7.12.1, Table no. 1 of IS 17011,(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Cl-7.12.1, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	2000	-
Cl-7.12.1, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	2000	-
Cl-7.12.1, Table no. 1 of IS 17011,(vi)(Formaldehyde (free or released by partial hydrolysis))	-	2000	-
Cl-7.12.1, Table no. 1 of IS 17011,(vii)(Formaldehyde)	-	2000	-
Cl-7.12.1, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	4500	-
Cl-7.12.1, Table no. 1 of IS 17011,(ix)(PCP-TeCP-TriCP polychlorophenols)	-	3000	-
Cl-7.12.1, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	4500	-
Cl-7.12.1, Table no. 1 of IS 17011,(vi)(Formaldehyde (free or released by partial hydrolysis))	-	2000	-
Cl-7.12.1, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	2000	-
Cl-7.12.1, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	2000	-
Cl-7.12.1, Table no. 1 of IS 17011,(x)(pH)	-	500	-
Cl-7.12.1, Table no. 1 of IS 17011,(xi)(Phthalates (each individual phthalate))	-	4500	-
C-7.12.1, Table no. 1 of IS 17011,(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	1000	-
Cl-7.12.2(PVC is present in sports shoe)	-	2000	-
Cl- 8.1(Marking)	-	300	-
Cl.7.7 Table-8 S.No- (iii)(Elongation at break, percent, Min)	-	500	-
Cl.7.8 Table-9 S.No- (iv)("a) Initial dry area shape retention, percent, Min b) Area shape retention after 10th collapse, dry, percent, Min ")	-	500	-
Cl-6(Size and Fittings)	-	300	-
Cl-5(Design)	-	300	-
Cl-6(Size and Fittings)	-	300	-
Cl.7.1.1(Upper to Mid Sole/Out Sole, Upper to Composite Sole (Applicable Only When the Sole is Composite) and Out Sole to Mid Sole (Multilayer, if Present), Bond Performance)	-	500	-
Cl.7.1.2(Energy Absorption at Seat Region)	-	500	-
Cl.7.1.1(Upper to Mid Sole/Out Sole, Upper to Composite Sole (Applicable Only When the Sole is Composite) and Out Sole to Mid Sole (Multilayer, if Present), Bond Performance)	-	500	-
Cl.7.1.2(Energy Absorption at Seat Region)	-	500	-
Cl.7.1.3(Complete Shoe Flexing)	-	1500	-
Cl.7.1.4(Washability)	-	1000	-
Cl.7.1.5(Slip Resistance)	-	1500	-
Cl.7.1.6(Heel Drop)	-	300	-
Cl.7.2 Table-2 S.No- (ii)(Tear strength (average force), N, Min)	-	500	-
Cl.7.2 Table-2 S.No- (i)("Flexing resistance, Min a) Dry condition b) Wet condition")	-	1500	-
Cl.7.2 Table-2 S.No- (iii)("Colour fastness rubbing a-Dry b-Wet")	-	500	-
Cl.7.2 Table-2 S.No- (iv)("a) Water vapour permeability b) Water vapour coefficient")	-	500	-
Cl.7.2 Table-2 S.No- (v)(Stitch tear strength N/mm, Min)	-	500	-
Cl.7.2 Table-2 S.No- (vi)(Colour fastness to light grey scale rate)	-	500	-
Cl.7.2 Table-2 S.No- (vii)(Tensile strength)	-	500	-
Cl.7.2 Table-2 S.No- (viii)(Elongation at break, percent)	-	500	-
Cl.7.2 Table-2 S.No- (ix)("Abrasion test a) Dry b) Wet")	-	800	-
Cl.7.2 Table-3 S.No- (i)(Breaking strength, N/mm, Min)	-	500	-
Cl.7.2 Table-3 S.No- (ii)(Elongation at break, percent, Min)	-	500	-
Cl.7.2 Table-3 S.No- (iii)(Tear strength, N, Min)	-	500	-
Cl.7.2 Table-3 S.No- (iv)(Strength at needle perforation)	-	500	-
Cl.7.2 Table-3 S.No- (v)("Flexing resistance a-Dry condition, b) Wet condition")	-	800	-
Cl.7.2 Table-3 S.No- (vi)("a) Water vapour permeability b) Water vapour coefficient")	-	800	-
Cl.7.2 Table-3 S.No- (vii)(Hydrolysis resistance)	-	1500	-
Cl.7.2 Table-3 S.No- (viii)(Colour fastness to light grey scale rate)	-	500	-
Cl.7.2 Table-3 S.No- (ix)(Bursting strength)	-	500	-
Cl.7.3 Table-4 S.No- (i)(Tear strength, N, Min)	-	500	-
Cl.7.3 Table-4 S.No- (ii)("Abrasion resistance, a) Dry b) Wet ")	-	800	-
Cl.7.3 Table-4 S.No- (iii)(Colour fastness to rubbing, grey scale rate with 10 rubs on dry or wet, Min)	-	500	-
Cl.7.3 Table-4 S.No- (iv)(Colour fastness to perspiration (contact method) grey scale rate, Min)	-	500	-
Cl.7.3 Table-4 S.No- (v)("a-Water vapour permeability b-Water vapour coefficient")	-	500	-
Cl.7.4 Table-5 S.No- (ii)(Abrasion resistance)	-	800	-
Cl.7.4 Table-5 S.No- (iii)("a) Water absorption b) Water desorption")	-	500	-
Cl.7.5 Table-6 S.No- (i)("Abrasion resistance a) Dry condition b) Wet condition")	-	500	-
Cl.7.5 Table-6 S.No- (ii)("a) Water absorption b) Water desorption")	-	500	-
Cl.7.5 Table-6 S.No- (iii)(Heat resistance shrinkage linear, percent, Max)	-	800	-
Cl.7.6 Table-7 S.No- (i)(Abrasion resistance)	-	800	-
Cl.7.6 Table-7 S.No- (ii)("Flexing resistance a) Bennewart Method b) Ross flexing method")	-	1500	-
Cl.7.6 Table-7 S.No- (iii)(Hydrolysis resistance)	-	1500	-
Cl.7.6 Table-7 S.No- (iv)(Tear strength, N/mm, Min)	-	500	-
Cl.7.6 Table-7 S.No- (v)(Tensile strength)	-	500	-
Cl.7.6 Table-7 S.No- (vi)(Elongation at break percent, Min)	-	500	-
Cl.7.6 Table-7 S.No- (vii)(Compression set percent, Max)	-	800	-
Cl.7.7 Table-8 S.No- (i)("Compression set, percent, Max a) For EVA b) For all other material")	-	800	-
Cl.7.7 Table-8 S.No- (ii)(Split tear strength)	-	500	-
Cl.7.7 Table-8 S.No- (iii)(Heat shrinkage, percent, Ma)	-	500	-
Cl.7.7 Table-8 S.No- (iv)(Elongation at break, percent, Min)	-	500	-
Cl.7.8 Table-9 S.No- (i)(First dry collapsing load, hardness, N, Min)	-	500	-
Cl.7.8 Table-9 S.No- (ii)(Resilience, percent, Min)	-	500	-
Cl.7.8 Table-9 S.No- (iii)(Moisture resistance, percent, Min)	-	500	-
Cl.7.8 Table-9 S.No- (v)(Peel strength, N/nm, Min)	-	500	-
Cl.7.9 Table-10 S.No- (i)("Peel strength, N/mm, Min a) Initial b) After 5 000 wear cycles")	-	500	-
Cl.7.9 Table-10 S.No- (ii)("Shear strength, kPa, Min a) Initial b) After 5 000 wear cycles")	-	500	-
Cl.7.10 Table-11 S.No- (i)(Limit of useful extension, percent, Min)	-	500	-
Cl.7.10 Table-11 S.No- (ii)(Needle strength, N/mm, Min)	-	500	-
Cl.7.11 Table-12 S.No- (i)(Breaking strength of lace)	-	500	-
Cl.7.11 Table-12 S.No- (ii)(Lace tag strength)	-	500	-
Cl.7.11 Table-12 S.No- (iii)(Lace to lace abrasion)	-	500	-
Cl.7.11 Table-12 S.No- (iv)(Colour fastness to water (for lace) (Contact method))	-	500	-
Cl.7.11 Table-12 S.No- (v)(Strength of buckle/ski hook/D-ring,)	-	500	-
Cl.7.11 Table-12 S.No- (vi)("Corrosion resistance (applicable for all including decorative metal part) ")	-	500	-
Cl.7.11 Table-13 S.No- (i)(Corrosion resistance (applicable for metallic spikes))	-	500	-
Cl-7.12.1, Table no. 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	3000	-
Cl-7.12.1, Table no. 1 of IS 17011,(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3500	-
Cl-7.12.1, Table no. 1 of IS 17011,(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3500	-
Cl-7.12.1, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	1000	-
Cl-7.12.1, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	2000	-
Cl-7.12.1, Table no. 1 of IS 17011,(vi)(Formaldehyde (free or released by partial hydrolysis))	-	1000	-
Cl-7.12.1, Table no. 1 of IS 17011,(vii)(Formaldehyde)	-	1000	-
Cl-7.12.1, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	3500	-
Cl-7.12.1, Table no. 1 of IS 17011,(ix)(PCP-TeCP-TriCP polychlorophenols)	-	3000	-
Cl-7.12.1, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	3000	-
Cl-7.12.1, Table no. 1 of IS 17011,(vi)(Formaldehyde (free or released by partial hydrolysis))	-	2000	-
Cl-7.12.1, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	2000	-
Cl-7.12.1, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	1000	-
Cl-7.12.1, Table no. 1 of IS 17011,(x)(pH)	-	500	-
Cl-7.12.1, Table no. 1 of IS 17011,(xi)(Phthalates (each individual phthalate))	-	4500	-
C-7.12.1, Table no. 1 of IS 17011,(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	1000	-
Cl-7.12.2(PVC is present in sports shoe)	-	500	-
Cl- 8.1(Marking)	-	300	-
Cl.7.7 Table-8 S.No- (iii)(Elongation at break, percent, Min)	-	500	-
Cl.7.8 Table-9 S.No- (iv)("a) Initial dry area shape retention, percent, Min b) Area shape retention after 10th collapse, dry, percent, Min ")	-	500	-
Cl.7.4 Table-5 S.No- (i)(Flexing index, Min)	-	1500	-

15 Apr, 2027

-
Included w.e.f.29.11.2024

8407

Stellar Test House, Noida

8171606

IS 302 : Part 2 : Sec 202 (1992)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 202 electric stoves

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	50	5% Discount for BIS
6(Classification- IS 302-1)	-	50	5% Discount for BIS
7.1(Marking- IS 302-1)	-	50	5% Discount for BIS
7.1(Marking- IS 302-1)	-	50	5% Discount for BIS
7.1(Marking- IS 302-1)	-	50	5% Discount for BIS
7.1(Marking- IS 302-1)	-	50	5% Discount for BIS
7.1(Marking- IS 302-1)	-	50	5% Discount for BIS
7.1(Marking- IS 302-1)	-	50	5% Discount for BIS
7.1(Marking- IS 302-1)	-	50	5% Discount for BIS
7.1(Marking- IS 302-1)	-	50	5% Discount for BIS
7.1(Marking- IS 302-1)	-	50	5% Discount for BIS
7.3(Marking- IS 302-1)	-	50	5% Discount for BIS
7.4(Marking- IS 302-1)	-	50	5% Discount for BIS
7.6(Marking- IS 302-1)	-	50	5% Discount for BIS
7.11(Marking- IS 302-1)	-	50	5% Discount for BIS
7.12(Marking- IS 302-1)	-	50	5% Discount for BIS
7.13(Marking- IS 302-1)	-	50	5% Discount for BIS
7.14(Marking- IS 302-1)	-	50	5% Discount for BIS
7.15(Marking- IS 302-1)	-	50	5% Discount for BIS
7.101(Marking)	-	50	5% Discount for BIS
8( Protection Against Electric Shock, IS 302-1)	-	400	5% Discount for BIS
10(Power Input and Current, IS 302-1)	-	800	5% Discount for BIS
11(Heating, IS 302-1)	-	100	5% Discount for BIS
11(Heating, IS 302-1)	-	200	5% Discount for BIS
11(Heating, IS 302-1)	-	100	5% Discount for BIS
11(Heating, IS 302-1)	-	100	5% Discount for BIS
11(Heating, IS 302-1)	-	100	5% Discount for BIS
11(Heating, IS 302-1)	-	100	5% Discount for BIS
11(Heating, IS 302-1)	-	100	5% Discount for BIS
12(Operation under overload conditions of appliances with heating elements, IS 302-2-202: 1992)	-	100	5% Discount for BIS
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	250	5% Discount for BIS
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	250	5% Discount for BIS
15.1(Moisture Resistance, IS 302-1)	-	500	5% Discount for BIS
15.3(Moisture Resistance, IS 302-1)	-	500	5% Discount for BIS
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	250	5% Discount for BIS
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	250	5% Discount for BIS
19.2(Abnormal Operation, IS 302-1)	-	250	5% Discount for BIS
19.2(Abnormal Operation, IS 302-1)	-	250	5% Discount for BIS
19.3(Abnormal Operation, IS 302-1)	-	250	5% Discount for BIS
19.3(Abnormal Operation, IS 302-1)	-	250	5% Discount for BIS
20.1(Stability & Mechanical Hazards, IS 302-1)	-	500	5% Discount for BIS
21.1(Mechanical Strength, IS 302-1 & IS 302-2-202)	-	500	5% Discount for BIS
22(Construction, IS 302-1)	-	100	5% Discount for BIS
22.101(Construction)	-	100	5% Discount for BIS
22.102(Construction)	-	100	5% Discount for BIS
22.103(Construction)	-	100	5% Discount for BIS
22.104(Construction)	-	100	5% Discount for BIS
22.105(Construction)	-	100	5% Discount for BIS
22.105.1(Construction)	-	100	5% Discount for BIS
22.105.2(Construction)	-	100	5% Discount for BIS
22.106(Construction)	-	100	5% Discount for BIS
11.107.1(Construction)	-	100	5% Discount for BIS
23.1(Internal Wiring, IS 302-1)	-	100	5% Discount for BIS
23.2(Internal Wiring, IS 302-1)	-	100	5% Discount for BIS
23.8(Internal Wiring, IS 302-1)	-	100	5% Discount for BIS
23.9(Internal Wiring, IS 302-1)	-	100	5% Discount for BIS
23.10(Internal Wiring, IS 302-1)	-	100	5% Discount for BIS
24.1(Components, IS 302-1)	-	100	5% Discount for BIS
24.2(Components, IS 302-1)	-	100	5% Discount for BIS
24.101(Components)	-	100	5% Discount for BIS
22.107(Construction)	-	100	5% Discount for BIS
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	50	5% Discount for BIS
25.4(Supply Connection and External Flexible Cords)	-	50	5% Discount for BIS
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	50	5% Discount for BIS
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	50	5% Discount for BIS
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	50	5% Discount for BIS
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	50	5% Discount for BIS
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	50	5% Discount for BIS
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	50	5% Discount for BIS
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	50	5% Discount for BIS
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	50	5% Discount for BIS
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	50	5% Discount for BIS
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	50	5% Discount for BIS
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	50	5% Discount for BIS
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	50	5% Discount for BIS
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	50	5% Discount for BIS
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	50	5% Discount for BIS
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	50	5% Discount for BIS
26(Terminals for External Conductors, IS 302-1)	-	500	5% Discount for BIS
27.1(Provision for Earthing, IS 302-1)	-	100	5% Discount for BIS
27.2(Provision for Earthing, IS 302-1)	-	100	5% Discount for BIS
27.3(Provision for Earthing, IS 302-1)	-	100	5% Discount for BIS
27.4(Provision for Earthing, IS 302-1)	-	100	5% Discount for BIS
27.5(Provision for Earthing, IS 302-1)	-	100	5% Discount for BIS
28(Screws & Connections, IS 302-1)	-	500	5% Discount for BIS
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	250	5% Discount for BIS
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	250	5% Discount for BIS
30.1(Resistance to Heat, Fire & Tracking, IS 302-1)	-	500	5% Discount for BIS
30.2(Resistance to Heat, Fire & Tracking, IS 302-1)	-	500	5% Discount for BIS
31(Resistance of Rusting, IS 302-1)	-	500	5% Discount for BIS
6(Classification- IS 302-1 )	-	50	5% Discount for BIS
6(Classification- IS 302-1)	-	50	5% Discount for BIS
7.1(Marking- IS 302-1)	-	50	5% Discount for BIS
7.1(Marking- IS 302-1)	-	50	5% Discount for BIS
7.1(Marking- IS 302-1)	-	50	5% Discount for BIS
7.1(Marking- IS 302-1)	-	50	5% Discount for BIS
7.1(Marking- IS 302-1)	-	50	5% Discount for BIS
7.1(Marking- IS 302-1)	-	50	5% Discount for BIS
7.1(Marking- IS 302-1)	-	50	5% Discount for BIS
7.1(Marking- IS 302-1)	-	50	5% Discount for BIS
7.1(Marking- IS 302-1)	-	50	5% Discount for BIS
7.3(Marking- IS 302-1)	-	50	5% Discount for BIS
7.4(Marking- IS 302-1)	-	50	5% Discount for BIS
7.6(Marking- IS 302-1)	-	50	5% Discount for BIS
7.11(Marking- IS 302-1)	-	50	5% Discount for BIS
7.12(Marking- IS 302-1)	-	50	5% Discount for BIS
7.13(Marking- IS 302-1)	-	50	5% Discount for BIS
7.14(Marking- IS 302-1)	-	50	5% Discount for BIS
7.15(Marking- IS 302-1)	-	50	5% Discount for BIS
7.101(Marking)	-	50	5% Discount for BIS
8( Protection Against Electric Shock, IS 302-1)	-	400	5% Discount for BIS
10(Power Input and Current, IS 302-1)	-	800	5% Discount for BIS
11(Heating, IS 302-1)	-	200	5% Discount for BIS
11(Heating, IS 302-1)	-	100	5% Discount for BIS
11(Heating, IS 302-1)	-	100	5% Discount for BIS
11(Heating, IS 302-1)	-	100	5% Discount for BIS
11(Heating, IS 302-1)	-	100	5% Discount for BIS
11(Heating, IS 302-1)	-	100	5% Discount for BIS
11(Heating, IS 302-1)	-	100	5% Discount for BIS
12(Operation under overload conditions of appliances with heating elements, IS 302-2-202: 1992)	-	100	5% Discount for BIS
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	250	5% Discount for BIS
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	250	5% Discount for BIS
15.1(Moisture Resistance, IS 302-1)	-	1000	5% Discount for BIS
15.3(Moisture Resistance, IS 302-1)	-	1000	5% Discount for BIS
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	250	5% Discount for BIS
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	250	5% Discount for BIS
19.2(Abnormal Operation, IS 302-1)	-	250	5% Discount for BIS
19.2(Abnormal Operation, IS 302-1)	-	250	5% Discount for BIS
19.3(Abnormal Operation, IS 302-1)	-	250	5% Discount for BIS
19.3(Abnormal Operation, IS 302-1)	-	250	5% Discount for BIS
20.1(Stability & Mechanical Hazards, IS 302-1)	-	500	5% Discount for BIS
21.1(Mechanical Strength, IS 302-1 & IS 302-2-202)	-	500	5% Discount for BIS
22(Construction, IS 302-1)	-	100	5% Discount for BIS
22.101(Construction)	-	100	5% Discount for BIS
22.102(Construction)	-	100	5% Discount for BIS
22.103(Construction)	-	100	5% Discount for BIS
22.104(Construction)	-	100	5% Discount for BIS
22.105(Construction)	-	100	5% Discount for BIS
22.105.1(Construction)	-	100	5% Discount for BIS
22.105.2(Construction)	-	100	5% Discount for BIS
22.106(Construction)	-	100	5% Discount for BIS
11.107.1(Construction)	-	100	5% Discount for BIS
23.1(Internal Wiring, IS 302-1)	-	100	5% Discount for BIS
23.2(Internal Wiring, IS 302-1)	-	100	5% Discount for BIS
23.8(Internal Wiring, IS 302-1)	-	100	5% Discount for BIS
23.9(Internal Wiring, IS 302-1)	-	100	5% Discount for BIS
23.10(Internal Wiring, IS 302-1)	-	100	5% Discount for BIS
24.1(Components, IS 302-1)	-	100	5% Discount for BIS
24.2(Components, IS 302-1)	-	100	5% Discount for BIS
24.101(Components)	-	100	5% Discount for BIS
22.107(Construction)	-	100	5% Discount for BIS
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	50	5% Discount for BIS
25.4(Supply Connection and External Flexible Cords)	-	50	5% Discount for BIS
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	50	5% Discount for BIS
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	50	5% Discount for BIS
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	50	5% Discount for BIS
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	500	5% Discount for BIS
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	50	5% Discount for BIS
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	50	5% Discount for BIS
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	50	5% Discount for BIS
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	50	5% Discount for BIS
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	50	5% Discount for BIS
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	50	5% Discount for BIS
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	50	5% Discount for BIS
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	50	5% Discount for BIS
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	50	5% Discount for BIS
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	50	5% Discount for BIS
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	50	5% Discount for BIS
26(Terminals for External Conductors, IS 302-1)	-	500	5% Discount for BIS
27.1(Provision for Earthing, IS 302-1)	-	100	5% Discount for BIS
27.2(Provision for Earthing, IS 302-1)	-	100	5% Discount for BIS
27.3(Provision for Earthing, IS 302-1)	-	100	5% Discount for BIS
27.4(Provision for Earthing, IS 302-1)	-	100	5% Discount for BIS
27.5(Provision for Earthing, IS 302-1)	-	100	5% Discount for BIS
28(Screws & Connections, IS 302-1)	-	500	5% Discount for BIS
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	250	5% Discount for BIS
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	250	5% Discount for BIS
30.1(Resistance to Heat, Fire & Tracking, IS 302-1)	-	500	5% Discount for BIS
30.2(Resistance to Heat, Fire & Tracking, IS 302-1)	-	500	5% Discount for BIS
31(Resistance of Rusting, IS 302-1)	-	500	5% Discount for BIS
6(Classification- IS 302-1 )	-	50	5% Discount for BIS
6(Classification- IS 302-1)	-	50	5% Discount for BIS
7.1(Marking- IS 302-1)	-	50	5% Discount for BIS
7.1(Marking- IS 302-1)	-	50	5% Discount for BIS
7.1(Marking- IS 302-1)	-	50	5% Discount for BIS
7.1(Marking- IS 302-1)	-	50	5% Discount for BIS
7.1(Marking- IS 302-1)	-	50	5% Discount for BIS
7.1(Marking- IS 302-1)	-	50	5% Discount for BIS
7.1(Marking- IS 302-1)	-	50	5% Discount for BIS
7.1(Marking- IS 302-1)	-	50	5% Discount for BIS
7.1(Marking- IS 302-1)	-	50	5% Discount for BIS
7.3(Marking- IS 302-1)	-	50	5% Discount for BIS
7.4(Marking- IS 302-1)	-	50	5% Discount for BIS
7.6(Marking- IS 302-1)	-	50	5% Discount for BIS
7.11(Marking- IS 302-1)	-	50	5% Discount for BIS
7.12(Marking- IS 302-1)	-	50	5% Discount for BIS
7.13(Marking- IS 302-1)	-	50	5% Discount for BIS
7.14(Marking- IS 302-1)	-	50	5% Discount for BIS
7.15(Marking- IS 302-1)	-	50	5% Discount for BIS
7.101(Marking)	-	50	5% Discount for BIS
8( Protection Against Electric Shock, IS 302-1)	-	400	5% Discount for BIS
10(Power Input and Current, IS 302-1)	-	800	5% Discount for BIS
11(Heating, IS 302-1)	-	100	5% Discount for BIS
11(Heating, IS 302-1)	-	100	5% Discount for BIS
11(Heating, IS 302-1)	-	100	5% Discount for BIS
11(Heating, IS 302-1)	-	100	5% Discount for BIS
11(Heating, IS 302-1)	-	100	5% Discount for BIS
11(Heating, IS 302-1)	-	100	5% Discount for BIS
11(Heating, IS 302-1)	-	100	5% Discount for BIS
12(Operation under overload conditions of appliances with heating elements, IS 302-2-202: 1992)	-	100	5% Discount for BIS
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	250	5% Discount for BIS
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	250	5% Discount for BIS
15.1(Moisture Resistance, IS 302-1)	-	500	5% Discount for BIS
15.3(Moisture Resistance, IS 302-1)	-	500	5% Discount for BIS
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	250	5% Discount for BIS
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	250	5% Discount for BIS
19.2(Abnormal Operation, IS 302-1)	-	250	5% Discount for BIS
19.2(Abnormal Operation, IS 302-1)	-	250	5% Discount for BIS
19.3(Abnormal Operation, IS 302-1)	-	250	5% Discount for BIS
19.3(Abnormal Operation, IS 302-1)	-	250	5% Discount for BIS
20.1(Stability & Mechanical Hazards, IS 302-1)	-	250	5% Discount for BIS
21.1(Mechanical Strength, IS 302-1 & IS 302-2-202)	-	500	5% Discount for BIS
22(Construction, IS 302-1)	-	100	5% Discount for BIS
22.101(Construction)	-	100	5% Discount for BIS
22.102(Construction)	-	100	5% Discount for BIS
22.103(Construction)	-	100	5% Discount for BIS
22.104(Construction)	-	100	5% Discount for BIS
22.105(Construction)	-	100	5% Discount for BIS
22.105.1(Construction)	-	100	5% Discount for BIS
22.105.2(Construction)	-	100	5% Discount for BIS
22.106(Construction)	-	100	5% Discount for BIS
11.107.1(Construction)	-	100	5% Discount for BIS
23.1(Internal Wiring, IS 302-1)	-	100	5% Discount for BIS
23.2(Internal Wiring, IS 302-1)	-	100	5% Discount for BIS
23.8(Internal Wiring, IS 302-1)	-	100	5% Discount for BIS
23.9(Internal Wiring, IS 302-1)	-	100	5% Discount for BIS
23.10(Internal Wiring, IS 302-1)	-	100	5% Discount for BIS
24.1(Components, IS 302-1)	-	100	5% Discount for BIS
24.2(Components, IS 302-1)	-	100	5% Discount for BIS
24.101(Components)	-	100	5% Discount for BIS
22.107(Construction)	-	100	5% Discount for BIS
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	50	5% Discount for BIS
25.4(Supply Connection and External Flexible Cords)	-	50	5% Discount for BIS
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	50	5% Discount for BIS
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	50	5% Discount for BIS
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	50	5% Discount for BIS
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	500	5% Discount for BIS
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	50	5% Discount for BIS
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	50	5% Discount for BIS
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	50	5% Discount for BIS
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	50	5% Discount for BIS
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	50	5% Discount for BIS
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	50	5% Discount for BIS
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	50	5% Discount for BIS
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	50	5% Discount for BIS
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	50	5% Discount for BIS
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	50	5% Discount for BIS
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	50	5% Discount for BIS
26(Terminals for External Conductors, IS 302-1)	-	50	5% Discount for BIS
27.1(Provision for Earthing, IS 302-1)	-	100	5% Discount for BIS
27.2(Provision for Earthing, IS 302-1)	-	100	5% Discount for BIS
27.3(Provision for Earthing, IS 302-1)	-	100	5% Discount for BIS
27.4(Provision for Earthing, IS 302-1)	-	100	5% Discount for BIS
27.5(Provision for Earthing, IS 302-1)	-	100	5% Discount for BIS
28(Screws & Connections, IS 302-1)	-	500	5% Discount for BIS
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	250	5% Discount for BIS
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	250	5% Discount for BIS
30.1(Resistance to Heat, Fire & Tracking, IS 302-1)	-	500	5% Discount for BIS
30.2(Resistance to Heat, Fire & Tracking, IS 302-1)	-	500	5% Discount for BIS
31(Resistance of Rusting, IS 302-1)	-	500	5% Discount for BIS

26 Sep, 2028

-
Included w.e.f.12.12.2024 Exclusion Cl 24, CL 22, (EMI/EMC) 19.11.4.1 to 19.11.4.7

8408

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 10631 (1983)

Specification for stainless steel for welding electrode core wire

21000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1 Table 1(Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	2000	-
5.1 Table 1(Silicon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	2000	-
5.1 Table 1(Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	2000	-
5.1 Table 1(Chromium- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	2000	-
5.1 Table 1(Nickel- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	2000	-
5.1 Table 1(Molybdenum- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	2000	-
5.1 Table 1(Sulphur- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	2000	-
5.1 Table 1(Phosphorous- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	2000	-
6(FREEDOM FROM DEFECTS)	-	2000	-
7(Size and Tolerances)	-	3000	-
Clause 5.1(Molybdenum)	-	0	(Repeat entry)
Clause 5.1(Nickel)	-	0	(Repeat entry)
Clause 5.1(Chromium)	-	0	(Repeat entry)
Clause 5.1(Silicon)	-	0	(Repeat entry)
Clause 5.1(Phosphorous)	-	0	(Repeat entry)
Clause 5.1(Sulphur)	-	0	(Repeat entry)
Clause 5.1(Manganese)	-	0	(Repeat entry)
Clause 5.1(Carbon)	-	0	(Repeat entry)
5.1 Table 1(Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	(Repeat entry)
5.1 Table 1(Silicon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	(Repeat entry)
5.1 Table 1(Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	(Repeat entry)
5.1 Table 1(Chromium- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	(Repeat entry)
5.1 Table 1(Nickel- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	(Repeat entry)
5.1 Table 1(Molybdenum- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	(Repeat entry)
5.1 Table 1(Sulphur- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	(Repeat entry)
5.1 Table 1(Phosphorous- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	(Repeat entry)
6(FREEDOM FROM DEFECTS)	-	0	(Repeat entry)
7(Size and Tolerances)	-	0	(Repeat entry)
Clause 5.1(Molybdenum)	-	0	(Repeat entry)
Clause 5.1(Nickel)	-	0	(Repeat entry)
Clause 5.1(Chromium)	-	0	(Repeat entry)
Clause 5.1(Silicon)	-	0	(Repeat entry)
Clause 5.1(Phosphorous)	-	0	(Repeat entry)
Clause 5.1(Sulphur)	-	0	(Repeat entry)
Clause 5.1(Manganese)	-	0	(Repeat entry)
Clause 5.1(Carbon)	-	0	(Repeat entry)
5.1 Table 1(Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	(Repeat entry)
5.1 Table 1(Silicon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	(Repeat entry)
5.1 Table 1(Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	(Repeat entry)
5.1 Table 1(Chromium- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	(Repeat entry)
5.1 Table 1(Nickel- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	(Repeat entry)
5.1 Table 1(Molybdenum- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	(Repeat entry)
5.1 Table 1(Sulphur- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	(Repeat entry)
5.1 Table 1(Phosphorous- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	(Repeat entry)
6(FREEDOM FROM DEFECTS)	-	0	(Repeat entry)
7(Size and Tolerances)	-	0	(Repeat entry)
Clause 5.1(Molybdenum)	-	0	(Repeat entry)
Clause 5.1(Nickel)	-	0	(Repeat entry)
Clause 5.1(Chromium)	-	0	(Repeat entry)
Clause 5.1(Silicon)	-	0	(Repeat entry)
Clause 5.1(Phosphorous)	-	0	(Repeat entry)
Clause 5.1(Sulphur)	-	0	(Repeat entry)
Clause 5.1(Manganese)	-	0	(Repeat entry)
Clause 5.1(Carbon)	-	0	(Repeat entry)

31 Dec, 2026

-
Included w.e.f.21.11.2024

8409

International Testing Centre, MSME Technology Development Centre, Meerut

8177804

IS 17012 (2018)

High ankle tactical boots with pu - Rubber sole - Specification

38600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Innocuousness Test IS 17011)	-	20000	-
4.16.2(Breaking Strength of lace )	-	500	-
4.16.1(Length of lace )	-	300	-
4.15(D-ring & Hooks )	-	300	-
6.1(Resistance to Fuel Oil)	-	500	-
4.14.9(Resistance to hot contact )	-	500	-
4.14.8(Flexing resistance )	-	800	-
4.14.7(Ageing test)	-	1500	-
4.14.6(Hardness (IRHD))	-	500	-
4.14.5(Abrasion resistance )	-	800	-
4.14.4(Tear Strength)	-	500	-
4.14.3(Sole Density )	-	300	-
4.14.2(Thickness)	-	300	-
4.14.1(Material)	-	500	-
4.13(Breaking Strength of thread )	-	500	-
4.12.2(Tear Strength)	-	500	-
4.12.1(Thickness )	-	300	-
4.11.2(Tear Strength)	-	500	-
4.11.1(Thickness )	-	300	-
4.10.3(Water absorption & desorption percent)	-	1000	-
4.10.2(Abrasion resistance )	-	1000	-
4.10.1(Material)	-	500	-
4.9.3(Water absorption & desorption percent)	-	1000	-
4.9.2(Abrasion resistance )	-	1000	-
4.9.1(Thickness)	-	300	-
4.8(Thickness Toe puff & counter stiffener)	-	1000	-
4.7.5(Water Vapour permeability & coefficient )	-	1000	-
4.7.4(Abrasion resistance )	-	800	-
4.7.3(Tear Strength)	-	500	-
4.7.2(Material Counter & Tongue)	-	800	-
4.7.1(Material vamp & Quarter)	-	800	-
4.6.3(Water Penetration and water absorption )	-	1000	-
4.6.2(Tear Strength)	-	500	-
4.6.1(Thickness )	-	300	-
4.5.8(Energy absorption of seat region )	-	500	-
4.5.7(Cold Insulation of sole complex)	-	500	-
4.5.6(Heat Insulation of sole Complex)	-	500	-
4.5.5(Antistatic test)	-	1000	-
4.5.4(Slip Resitance)	-	1500	-
4.5.3.2(Interayer bond strength)	-	500	-
4.5.3.1(Upper/outsole bond strength)	-	500	-
4.5.2(Ergonomic Feature)	-	500	-
4.5.1(Construction)	-	500	-
4.4(Height of upper )	-	300	-
4.3.2(Weight)	-	300	-
4.2(Design )	-	300	-
Cl. 6, Cl.6.1, 6.1.1 & 6.1.2, 8.6 of IS 15298 part 1,ISO 1817,ISO 4643,(Resistance to fuel oil)	-	1500	-
8, 8.1, 8.2, 8.2.1(Marking)	-	300	-
9(Information to be Supplied)	-	300	-
Cl.4.6.4(Water Penetration and Water Absorption)	-	1000	-
Cl. 6, Cl.6.1, 6.1.1 & 6.1.2,(Resistance to fuel oil)	-	500	-
CL.8,8.1, 8.2,8.2.1(Marking)	-	300	-
Cl.9,(Information to be Supplied)	-	300	-
4.3.1(Size)	-	300	-

15 Apr, 2027

-
Included w.e.f 19.09.2024

8410

Ahmedabad Textile Industry's Research Association (ATIRA), Ahmedabad

7173002

IS 16089 (2013)

Jute agro-textile – Sapling bags for growth of seedling/ sapling – Specification

3250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4, Table 1, (i)(Mass, g/m², Min)	-	450	-
Clause 4, Table 1, (ii)(Thickness, mm)	-	450	-
Clause 4, Table 1, (iv) a(Threads/dm, Warp)	-	150	-
Clause 4, Table 1, (iv) b(Threads/dm, Weft)	-	150	-
Clause 4, Table 1, (v)(Width of Hessian fabric, cm)	-	200	-
Clause 4, Table 1, (vi)(Length and width of sapling bags, cm, Min)	-	400	-
Clause 4, Table 1, (vii)(Water holding capacity, percent)	-	550	-
Clause 4, Table 1, (viii) a(Tensile strength, kN/m, Warp)	-	450	-
Clause 4, Table 1, (viii) b(Tensile strength, kN/m, Weft)	-	450	-

-
Included w.e.f 10.10.2024 Excluding Cl 4, Table 1, (iii) (Open area, percent)

8411

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 2501 (1995)

Solid drawn copper tubesfor general engineering purposes - Specification (Third Revision)

Copper tubes

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No.5(Grades)	-	6000	Hydrogen Embrittlement Test. 5000/- extra charges.
Cl. No.6(CONDITION)	-	100	Hydrogen Embrittlement Test. 5000/- extra charges.
Cl. No. 7(FREEDOM FROM DEFECTS)	-	100	Hydrogen Embrittlement Test. 5000/- extra charges.
Cl. No. 8.1(Dimensions)	-	1500	Hydrogen Embrittlement Test. 5000/- extra charges.
Cl. No. 8.2(Tolerances)	-	200	Hydrogen Embrittlement Test. 5000/- extra charges.
Cl. No. 9(CHEMICAL COMPOSITION)	-	6000	Hydrogen Embrittlement Test. 5000/- extra charges.
Cl. No. 10.1.1, Table no. 1(Tensile Test)	-	2500	Hydrogen Embrittlement Test. 5000/- extra charges.
Cl. No. 10.2(Flattening and Doubling-Over Test)	-	1900	Hydrogen Embrittlement Test. 5000/- extra charges.
Cl. No. 10.3(Drift Expanding Test)	-	2000	Hydrogen Embrittlement Test. 5000/- extra charges.
Cl. No. 10.4(Non-Destructive Testing)	-	100	Hydrogen Embrittlement Test. 5000/- extra charges.
Cl. No. 10.5("Microscopic Examination ( for 0 Condition Only )")	-	500	Hydrogen Embrittlement Test. 5000/- extra charges.
Cl. No. 13(Marking)	-	100	Hydrogen Embrittlement Test. 5000/- extra charges.
10.6(Hydrogen Embrittlement Test)	-	0	Hydrogen Embrittlement Test. 5000/- extra charges.
Cl. No.5(Grades)	-	6000	-
Cl. No.6(CONDITION)	-	100	-
Cl. No. 7(FREEDOM FROM DEFECTS)	-	100	-
Cl. No. 8.1(Dimensions)	-	1500	-
Cl. No. 8.2(Tolerances)	-	200	-
Cl. No. 9(CHEMICAL COMPOSITION)	-	6000	-
Cl. No. 10.1.1, Table no. 1(Tensile Test)	-	2500	-
Cl. No. 10.2(Flattening and Doubling-Over Test)	-	1900	-
Cl. No. 10.3(Drift Expanding Test)	-	2000	-
Cl. No. 10.4(Non-Destructive Testing)	-	100	-
Cl. No. 10.5("Microscopic Examination ( for 0 Condition Only )")	-	500	-
Cl. No. 13(Marking)	-	100	-
10.6(Hydrogen Embrittlement Test)	-	0	-

31 Dec, 2026

-
Included w.e.f. 15.04.2024

8412

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 4412 (1981)

Specification for copper wires for general engineering purposes (First Revision)

Copper wires

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4(Chemical Composition)	-	10000	Hydrogen Embrittlement Test. 5000/- extra charges.
5.1(Tensile Test)	-	3500	Hydrogen Embrittlement Test. 5000/- extra charges.
5.2(Embrittlement Test)	-	0	Hydrogen Embrittlement Test. 5000/- extra charges.
6(Freedom from defect)	-	500	Hydrogen Embrittlement Test. 5000/- extra charges.
7.1(Diameter and Tolerances)	-	1000	Hydrogen Embrittlement Test. 5000/- extra charges.
Clause 4.1 ( Table -1)(Copper+Silver)	-	1000	Hydrogen Embrittlement Test. 5000/- extra charges.
Clause 4.1 ( Table -1)(phosphorus)	-	500	Hydrogen Embrittlement Test. 5000/- extra charges.
Clause 4.1 ( Table -1)(Antimony)	-	500	Hydrogen Embrittlement Test. 5000/- extra charges.
Clause 4.1 ( Table -1)(Arsenic)	-	500	Hydrogen Embrittlement Test. 5000/- extra charges.
Clause 4.1 ( Table -1)(Bismuth)	-	500	Hydrogen Embrittlement Test. 5000/- extra charges.
Clause 4.1 ( Table -1)(Iron)	-	500	Hydrogen Embrittlement Test. 5000/- extra charges.
Clause 4.1 ( Table -1)(Lead)	-	500	Hydrogen Embrittlement Test. 5000/- extra charges.
Clause 4.1 ( Table -1)(Nckel)	-	500	Hydrogen Embrittlement Test. 5000/- extra charges.
Clause 4.1 ( Table -1)(Selenium+Tellurium)	-	4000	Hydrogen Embrittlement Test. 5000/- extra charges.
Clause 4.1 ( Table -1)(Tellurium)	-	2000	Hydrogen Embrittlement Test. 5000/- extra charges.
Clause 4.1 ( Table -1)(Tin)	-	500	Hydrogen Embrittlement Test. 5000/- extra charges.
Clause 4.1 ( Table -1)(Total Impurities)	-	1000	Hydrogen Embrittlement Test. 5000/- extra charges.
Clause 4(Chemical Composition)	-	10000	-
5.1(Tensile Test)	-	3500	-
5.2(Embrittlement Test)	-	0	-
6(Freedom from defect)	-	500	-
7.1(Diameter and Tolerances)	-	1000	-
Clause 4.1 ( Table -1)(Copper+Silver)	-	1000	-
Clause 4.1 ( Table -1)(phosphorus)	-	500	-
Clause 4.1 ( Table -1)(Antimony)	-	500	-
Clause 4.1 ( Table -1)(Arsenic)	-	500	-
Clause 4.1 ( Table -1)(Bismuth)	-	500	-
Clause 4.1 ( Table -1)(Iron)	-	500	-
Clause 4.1 ( Table -1)(Lead)	-	500	-
Clause 4.1 ( Table -1)(Nckel)	-	500	-
Clause 4.1 ( Table -1)(Selenium+Tellurium)	-	4000	-
Clause 4.1 ( Table -1)(Tellurium)	-	2000	-
Clause 4.1 ( Table -1)(Tin)	-	500	-
Clause 4.1 ( Table -1)(Total Impurities)	-	1000	-

31 Dec, 2026

-
Included w.e.f. 15.04.2024 Exclusion: Cl.5.2 (Embrittlement Test)

8413

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 4171 (1983)

Specification for copper rods and bars for general engineering purposes (First Revision)

Copper rods & bars

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.1 Table 1(1. Copper, including silver, min)	-	1000	Hydrogen Embrittlement Test. 5000/- extra charges.
Clause 4.1 Table 1(2. Tin, max)	-	1000	Hydrogen Embrittlement Test. 5000/- extra charges.
Clause 4.1 Table 1(3. Lead, max)	-	1000	Hydrogen Embrittlement Test. 5000/- extra charges.
Clause 4.1 Table 1(5. Nickel, max)	-	1000	Hydrogen Embrittlement Test. 5000/- extra charges.
Clause 4.1 Table 1(6. Arsenic, max)	-	1000	Hydrogen Embrittlement Test. 5000/- extra charges.
Clause 4.1 Table 1(7. Antimony, max)	-	1000	Hydrogen Embrittlement Test. 5000/- extra charges.
Clause 4.1 Table 1(8. Bismuth, max)	-	1000	Hydrogen Embrittlement Test. 5000/- extra charges.
Clause 4.1 Table 1(9. Phosphorus)	-	1000	Hydrogen Embrittlement Test. 5000/- extra charges.
Clause 4.1 Table 1(10. Selenium and Tellurium, max)	-	1000	Hydrogen Embrittlement Test. 5000/- extra charges.
Clause 4.1 Table 1(11. Total impurities ( excluding silver, nickel and phosphorus ), max)	-	1000	Hydrogen Embrittlement Test. 5000/- extra charges.
5.2(Hydrogen Embrittlement test)	-	0	Hydrogen Embrittlement Test. 5000/- extra charges.
5.1(Tensile Properties)	-	4000	Hydrogen Embrittlement Test. 5000/- extra charges.
7.1(Dimension and Tolerances)	-	1000	Hydrogen Embrittlement Test. 5000/- extra charges.
Clause 4.1 Table 1(1. Copper, including silver, min)	-	1000	-
Clause 4.1 Table 1(2. Tin, max)	-	1000	-
Clause 4.1 Table 1(3. Lead, max)	-	1000	-
Clause 4.1 Table 1(5. Nickel, max)	-	1000	-
Clause 4.1 Table 1(6. Arsenic, max)	-	1000	-
Clause 4.1 Table 1(7. Antimony, max)	-	1000	-
Clause 4.1 Table 1(8. Bismuth, max)	-	1000	-
Clause 4.1 Table 1(9. Phosphorus)	-	1000	-
Clause 4.1 Table 1(10. Selenium and Tellurium, max)	-	1000	-
Clause 4.1 Table 1(11. Total impurities ( excluding silver, nickel and phosphorus ), max)	-	1000	-
5.2(Hydrogen Embrittlement test)	-	0	-
5.1(Tensile Properties)	-	4000	-
7.1(Dimension and Tolerances)	-	1000	-

31 Dec, 2026

-
-

8414

Hi Physix Laboratory India Private Limited, Pune

7126926

IS 3315 (2024)

Direct Evaporative Air Cooler â Specification (Fourth Revision)

82000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Enclosure)	-	12000	-
Cl-5.2(Filter Pads)	-	0	-
Cl-5.3(Sump Tank Capacities)	-	5000	-
Cl-5.4(Blower/Fan)	-	0	-
Cl-5.4.3(Fan motor)	-	0	Compliance will be checked by pre-testing documents. In case testing is required as per IS 996 additional charges of Rs. 14334/- will be applicable.
Cl-5.5(Pump Set)	-	0	Compliance will be checked by pre-testing documents. In case testing is required as per IS 11951 additional charges of Rs. 49500/- will be applicable.
Cl-5.6.1(Electrical wiring and connection)	-	1000	-
Cl-5.6.2(Suitable power cable)	-	1000	Length of measurement of cords
Cl-5.7(Switches)	-	0	In case switch need to be tested as per Cl. 5.7 a), b), c), d). Additional Testing charges will be applicable of Rs. 10000/-
Cl-6(Rating Requirement)	-	0	-
Cl-8.1(Performance Requirement)	-	0	Charges given in main test clauses
Cl-8.2(Sound Test)	-	10000	-
Cl-8.3(Air Delivery (Air Flow) Test)	-	10000	-
Cl-8.4(Cooling Efficiency Test)	-	10000	-
Cl-8.5(Power Consumption)	-	5000	Including Power factor measurements
Cl-8.6(EER Calculation Method)	-	1000	-
Cl-8.7(Drop Test)	-	2000	-
Cl-8.8(Air Cooler Blower/Fan Reliability Test)	-	15000	-
Cl-12.2.1(General Running Tests)	-	1000	-
Cl-12.2.2(Protection against Electric Shock)	-	2000	-
Cl-12.2.3(High Voltage Tests)	-	2000	-
Cl-12.2.4(Leakage Current)	-	2000	-
Cl-12.2.5(Provision for Earthing)	-	2000	-
Cl-12.2.6(Finish)	-	1000	-
Cl-13(Additional Requirement for ECO-Mark)	-	0	-
Cl-14(Storage)	-	0	-
Cl-5.1(Enclosure)	-	0	-
Cl-5.2(Filter Pads)	-	0	-
Cl-5.3(Sump Tank Capacities)	-	0	-
Cl-5.4(Blower/Fan)	-	0	-
Cl-5.4.3(Fan motor)	-	0	-
Cl-5.5(Pump Set)	-	0	-
Cl-5.6.1(Electrical wiring and connection)	-	0	-
Cl-5.6.2(Suitable power cable)	-	0	-
Cl-5.7(Switches)	-	0	-
Cl-6(Rating Requirement)	-	0	-
Cl-8.1(Performance Requirement)	-	0	-
Cl-8.2(Sound Test)	-	0	-
Cl-8.3(Air Delivery (Air Flow) Test)	-	0	-
Cl-8.4(Cooling Efficiency Test)	-	0	-
Cl-8.5(Power Consumption)	-	0	-
Cl-8.6(EER Calculation Method)	-	0	-
Cl-8.7(Drop Test)	-	0	-
Cl-8.8(Air Cooler Blower/Fan Reliability Test)	-	0	-
Cl-12.2.1(General Running Tests)	-	0	-
Cl-12.2.2(Protection against Electric Shock)	-	0	-
Cl-12.2.3(High Voltage Tests)	-	0	-
Cl-12.2.4(Leakage Current)	-	0	-
Cl-12.2.5(Provision for Earthing)	-	0	-
Cl-12.2.6(Finish)	-	0	-
Cl-13(Additional Requirement for ECO-Mark)	-	0	-
Cl-14(Storage)	-	0	-
Cl-5.1(Enclosure)	-	0	-
Cl-5.2(Filter Pads)	-	0	-
Cl-5.3(Sump Tank Capacities)	-	0	-
Cl-5.4(Blower/Fan)	-	0	-
Cl-5.4.3(Fan motor)	-	0	-
Cl-5.5(Pump Set)	-	0	-
Cl-5.6.1(Electrical wiring and connection)	-	0	-
Cl-5.6.2(Suitable power cable)	-	0	-
Cl-5.7(Switches)	-	0	-
Cl-6(Rating Requirement)	-	0	-
Cl-8.1(Performance Requirement)	-	0	-
Cl-8.2(Sound Test)	-	0	-
Cl-8.3(Air Delivery (Air Flow) Test)	-	0	-
Cl-8.4(Cooling Efficiency Test)	-	0	-
Cl-8.5(Power Consumption)	-	0	-
Cl-8.6(EER Calculation Method)	-	0	-
Cl-8.7(Drop Test)	-	0	-
Cl-8.8(Air Cooler Blower/Fan Reliability Test)	-	0	-
Cl-12.2.1(General Running Tests)	-	0	-
Cl-12.2.2(Protection against Electric Shock)	-	0	-
Cl-12.2.3(High Voltage Tests)	-	0	-
Cl-12.2.4(Leakage Current)	-	0	-
Cl-12.2.5(Provision for Earthing)	-	0	-
Cl-12.2.6(Finish)	-	0	-
Cl-13(Additional Requirement for ECO-Mark)	-	0	-
Cl-14(Storage)	-	0	-
Cl-5.1(Enclosure)	-	0	-
Cl-5.2(Filter Pads)	-	0	-
Cl-5.3(Sump Tank Capacities)	-	0	-
Cl-5.4(Blower/Fan)	-	0	-
Cl-5.4.3(Fan motor)	-	0	-
Cl-5.5(Pump Set)	-	0	-
Cl-5.6.1(Electrical wiring and connection)	-	0	-
Cl-5.6.2(Suitable power cable)	-	0	-
Cl-5.7(Switches)	-	0	-
Cl-6(Rating Requirement)	-	0	-
Cl-8.1(Performance Requirement)	-	0	-
Cl-8.2(Sound Test)	-	0	-
Cl-8.3(Air Delivery (Air Flow) Test)	-	0	-
Cl-8.4(Cooling Efficiency Test)	-	0	-
Cl-8.5(Power Consumption)	-	0	-
Cl-8.6(EER Calculation Method)	-	0	-
Cl-8.7(Drop Test)	-	0	-
Cl-8.8(Air Cooler Blower/Fan Reliability Test)	-	0	-
Cl-12.2.1(General Running Tests)	-	0	-
Cl-12.2.2(Protection against Electric Shock)	-	0	-
Cl-12.2.3(High Voltage Tests)	-	0	-
Cl-12.2.4(Leakage Current)	-	0	-
Cl-12.2.5(Provision for Earthing)	-	0	-
Cl-12.2.6(Finish)	-	0	-
Cl-13(Additional Requirement for ECO-Mark)	-	0	-
Cl-14(Storage)	-	0	-
Cl-5.1(Enclosure)	-	0	-
Cl-5.2(Filter Pads)	-	0	-
Cl-5.3(Sump Tank Capacities)	-	0	-
Cl-5.4(Blower/Fan)	-	0	-
Cl-5.4.3(Fan motor)	-	0	-
Cl-5.5(Pump Set)	-	0	-
Cl-5.6.1(Electrical wiring and connection)	-	0	-
Cl-5.6.2(Suitable power cable)	-	0	-
Cl-5.7(Switches)	-	0	-
Cl-6(Rating Requirement)	-	0	-
Cl-8.1(Performance Requirement)	-	0	-
Cl-8.2(Sound Test)	-	0	-
Cl-8.3(Air Delivery (Air Flow) Test)	-	0	-
Cl-8.4(Cooling Efficiency Test)	-	0	-
Cl-8.5(Power Consumption)	-	0	-
Cl-8.6(EER Calculation Method)	-	0	-
Cl-8.7(Drop Test)	-	0	-
Cl-8.8(Air Cooler Blower/Fan Reliability Test)	-	0	-
Cl-12.2.1(General Running Tests)	-	0	-
Cl-12.2.2(Protection against Electric Shock)	-	0	-
Cl-12.2.3(High Voltage Tests)	-	0	-
Cl-12.2.4(Leakage Current)	-	0	-
Cl-12.2.5(Provision for Earthing)	-	0	-
Cl-12.2.6(Finish)	-	0	-
Cl-13(Additional Requirement for ECO-Mark)	-	0	-
Cl-14(Storage)	-	0	-

20 Jun, 2028

-
Included w.e.f. 05.11.2024

8415

BIS, Central Laboratory (CL)

None

IS 8028 (2023)

QUINALPHOS EMULSIFIABLE CONCENTRATE SPECIFICATION second revision

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
CL 3.2.1 (Description)	-
Cl. 3.2.2 (Cold Test)	-
CL 3.2.3 (Flash Point)	-
CL 3.2.4 (Emul;sion Stability)	-
CL 3.2.5 (Acidity)	-

-
-

8416

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 3735 (1996)

Canvas Shoes, Rubber Sole

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4.5 Consolidation Test IS 3400 (Part 5) : 1986 (From the quarter, cut a strip of 25.0 ± 0.5 mm width along the leagth of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30N (3.0 kgf) for each of the teat piecea (see Note under 4.4).')	-	100	-
4.1.1 Upper, Sl No. (i) of Table 1(The upper shall consist of over layer of cotton, manmade or blended conforming' to the requirements given in Sl No. (i) of Table 1 as an overlayer and cotton drill conforming to the requirements given in Sl No. (ii) of Table 1, as an inner layer or lining. The two fabrics shall be firmly adhered together with rubber compound. )	-	100	-
Cl.4.1.1.1 Colour fastness(The dyed fabrics prescribed in 4.1.1 shall be fast todaylight and mechanical washing. Fastness to daylight shall be of rating 4 or better, when tested in accordance with IS 686 : 1985 or IS 2454: 1985. However in case of dispute the method prescribed in IS 686 : 1985 shall be considered as referee method.)	-	100	-
Cl.4.1.2 Binding Material(IS 1954 : 1990) (IS1969 : 1985)(Cotton tape NEWAR used as binding material shall conform to the requirements prescribed in col 3 of Table 2, when tested in accordance with the methods referred to in col 4 of the table.)	-	100	-
Cl.4.1.2.1 Anmex B.(Cotton, manmade or blended shall be used as binding material.' 'Coloured cotton tapes shall have fastness to day light of rating as and if agreed to between the purchaser and the supplier when tested in accordance with IS 686 : 1985. The black tapes shall be free from sulphur dyes when tested in accordance with Annex B.')	-	100	-
Cl.4.1.3.1( Sewing thread cotton, manmade or blended shall be used for stitching of upper. For cotton variety thread shall conform to variety No. 28 of IS 1720. Polyester variety thread shall conform to variety No. 9 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification. Sewing thread cotton, manmade or blended shall be used for binding of upper. For cotton variety thread shall conform to variety No. 32 of IS 1720. Polyester variety thread shall conform to variety No. 5 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification.')	-	100	-
Cl.4.3.3( The counter shall be stitched at the back, set from bottom of lining and bound flat on top edge with white/scoured binding material cut in bias and formed as a tape. T )	-	100	-
Cl.4.1.4(.Brass, steel or aluminium eyelets of 7.5 mm diameter and wall thickness 0.30 to 0.35 mm shall be used.')	-	100	-
Cl.4.1.5 Laces( The shoes shall be provided with fabric braided laces either matching the shade of the upper or black or The length of the lace shall be 60 ± 3 cm )	-	100	-
Cl.4.1.5 Laces(and shallhave the breaking strength of not less than 250 N when tested between 18 cm grips in accordance with IS 1969 : 1985, the rate of traverse of power actuated grip being 300 mm/min.)	-	100	-
Cl.4.1.5 Laces Annex B(In case the laces are black, the same shall pass the test for freedom from sulpher dyes when tested in accordance with Annex B. The two ends of the lace shall be provided with suitable metal or plastic tips.)	-	100	-
Cl.4.1.6 Rubber Components(The rubber components shall conform to the requirements given in Table 4, when tested from finished boots.However in case it is not possible to cut the test pieces from the made up boots then 4.1.5.3 of IS 13695 : 1993 shall be followed.')	-	100	-
Cl.4.1.6.2 Ageing col 4 of Table 5.(The shoes shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the shoes shall conform to the physical requirements prescribed in col 4 of Table 5. )	-	100	-
Cl.4.1.6.2 Ageing (None of the rubber components of the shoes shall show any sign of tackiness or crack developed after ageing, when examined visually)	-	100	-
Cl.4.1.6.3 Thickness of components in Table 6.(Individual components of the shoes shall comply with the thickness and material requirements prescribed in Table 6.)	-	100	-
CL.4.2 Shape and Design IS 1638 : 1969(Cl 4.2.1 The shoes shall be made according to design and pattern as agreed to between the purchaser and the supplier. Size and fittings of the shoes shall be in accordance with IS 1638 : 1969 unless otherwise specified by the purchaser.)	-	100	-
Cl.4.2.2( The recommended design of canvas shoes is shown in Fig. 1.)	-	100	-
Cl.4.3 Construction Cl 4.3.1( The upper shall be stitched on a lock stitch machine and the number of stitches shall be 30 to 40 per dm.)	-	100	-
Cl.'4.3.2( Back of the upper shall be reinforced with a strip of upper material when there is a seam.')	-	100	-
Cl.4.3.3( The counter shall be stitched at the back, set from bottom of lining and bound flat on top edge with white/scoured binding material cut in bias and formed as a tape. T )	-	100	-
Cl.4.3.3(he number of stitches shall be 30 to 40 per decimetre. The counter binding shall meet the binding of the upper at the centre top edge of the heel.)	-	100	-
Cl.4.4 Adhesion Test(From the upper-foxing portion where it is adhered to the canvas, parallel to the waist of sole, cut a strip of length 100 mm and width 8 mm. Separate out the plies initially by breaking the bond to a length of about 75 mm. Carry out the test on two specimens in accordance with IS 3400 (Part 5) : 1986. There shall be no further separation within 1 minute at a load of 1 kg for each of the two specimens.)	-	100	-
CL.4.6 Mass(The mass of one pair of finished shoes of size 8 shall not exceed 750 g with an increase or decrease of 25 g for each bigger or smaller size respectively)	-	100	-
Cl.4.3.3(he number of stitches shall be 30 to 40 per decimetre. The counter binding shall meet the binding of the upper at the centre top edge of the heel.)	-	100	-
Cl.4.5 Consolidation Test IS 3400 (Part 5) : 1986 (From the quarter, cut a strip of 25.0 ± 0.5 mm width along the leagth of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30N (3.0 kgf) for each of the teat piecea (see Note under 4.4).')	-	100	-
4.1.1 Upper, Sl No. (i) of Table 1(The upper shall consist of over layer of cotton, manmade or blended conforming' to the requirements given in Sl No. (i) of Table 1 as an overlayer and cotton drill conforming to the requirements given in Sl No. (ii) of Table 1, as an inner layer or lining. The two fabrics shall be firmly adhered together with rubber compound. )	-	100	-
Cl.4.1.1.1 Colour fastness(The dyed fabrics prescribed in 4.1.1 shall be fast todaylight and mechanical washing. Fastness to daylight shall be of rating 4 or better, when tested in accordance with IS 686 : 1985 or IS 2454: 1985. However in case of dispute the method prescribed in IS 686 : 1985 shall be considered as referee method.)	-	100	-
Cl.4.1.2 Binding Material(IS 1954 : 1990) (IS1969 : 1985)(Cotton tape NEWAR used as binding material shall conform to the requirements prescribed in col 3 of Table 2, when tested in accordance with the methods referred to in col 4 of the table.)	-	100	-
Cl.4.1.2.1 Anmex B.(Cotton, manmade or blended shall be used as binding material.' 'Coloured cotton tapes shall have fastness to day light of rating as and if agreed to between the purchaser and the supplier when tested in accordance with IS 686 : 1985. The black tapes shall be free from sulphur dyes when tested in accordance with Annex B.')	-	100	-
Cl.4.1.3.1( Sewing thread cotton, manmade or blended shall be used for stitching of upper. For cotton variety thread shall conform to variety No. 28 of IS 1720. Polyester variety thread shall conform to variety No. 9 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification. Sewing thread cotton, manmade or blended shall be used for binding of upper. For cotton variety thread shall conform to variety No. 32 of IS 1720. Polyester variety thread shall conform to variety No. 5 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification.')	-	100	-
Cl.4.1.3.2 (IS 2454 : 1985) IS 765 : 1979 IS 971 : 1966( The colour of the threads shall be as agreedto between the purchaser and the supplier. The dyed threads shall conform to the following requirements or IS 686 : 1985'.)	-	100	-
Cl.4.1.4(.Brass, steel or aluminium eyelets of 7.5 mm diameter and wall thickness 0.30 to 0.35 mm shall be used.')	-	100	-
Cl.4.1.5 Laces( The shoes shall be provided with fabric braided laces either matching the shade of the upper or black or The length of the lace shall be 60 ± 3 cm )	-	100	-
Cl.4.1.5 Laces(and shallhave the breaking strength of not less than 250 N when tested between 18 cm grips in accordance with IS 1969 : 1985, the rate of traverse of power actuated grip being 300 mm/min.)	-	100	-
Cl.4.1.5 Laces Annex B(In case the laces are black, the same shall pass the test for freedom from sulpher dyes when tested in accordance with Annex B. The two ends of the lace shall be provided with suitable metal or plastic tips.)	-	100	-
Cl.4.1.6 Rubber Components(The rubber components shall conform to the requirements given in Table 4, when tested from finished boots.However in case it is not possible to cut the test pieces from the made up boots then 4.1.5.3 of IS 13695 : 1993 shall be followed.')	-	100	-
Cl.4.1.6.2 Ageing col 4 of Table 5.(The shoes shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the shoes shall conform to the physical requirements prescribed in col 4 of Table 5. )	-	100	-
Cl.4.1.6.2 Ageing (None of the rubber components of the shoes shall show any sign of tackiness or crack developed after ageing, when examined visually)	-	100	-
Cl.4.1.6.3 Thickness of components in Table 6.(Individual components of the shoes shall comply with the thickness and material requirements prescribed in Table 6.)	-	100	-
CL.4.2 Shape and Design IS 1638 : 1969(Cl 4.2.1 The shoes shall be made according to design and pattern as agreed to between the purchaser and the supplier. Size and fittings of the shoes shall be in accordance with IS 1638 : 1969 unless otherwise specified by the purchaser.)	-	100	-
Cl.4.2.2( The recommended design of canvas shoes is shown in Fig. 1.)	-	100	-
Cl.4.3 Construction Cl 4.3.1( The upper shall be stitched on a lock stitch machine and the number of stitches shall be 30 to 40 per dm.)	-	100	-
Cl.'4.3.2( Back of the upper shall be reinforced with a strip of upper material when there is a seam.')	-	100	-
Cl.4.4 Adhesion Test(From the upper-foxing portion where it is adhered to the canvas, parallel to the waist of sole, cut a strip of length 100 mm and width 8 mm. Separate out the plies initially by breaking the bond to a length of about 75 mm. Carry out the test on two specimens in accordance with IS 3400 (Part 5) : 1986. There shall be no further separation within 1 minute at a load of 1 kg for each of the two specimens.)	-	100	-
CL.4.6 Mass(The mass of one pair of finished shoes of size 8 shall not exceed 750 g with an increase or decrease of 25 g for each bigger or smaller size respectively)	-	100	-
Cl.4.5 Consolidation Test IS 3400 (Part 5) : 1986 (From the quarter, cut a strip of 25.0 ± 0.5 mm width along the leagth of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30N (3.0 kgf) for each of the teat piecea (see Note under 4.4).')	-	100	-
4.1.1 Upper, Sl No. (i) of Table 1(The upper shall consist of over layer of cotton, manmade or blended conforming' to the requirements given in Sl No. (i) of Table 1 as an overlayer and cotton drill conforming to the requirements given in Sl No. (ii) of Table 1, as an inner layer or lining. The two fabrics shall be firmly adhered together with rubber compound. )	-	100	-
Cl.4.1.1.1 Colour fastness(The dyed fabrics prescribed in 4.1.1 shall be fast todaylight and mechanical washing. Fastness to daylight shall be of rating 4 or better, when tested in accordance with IS 686 : 1985 or IS 2454: 1985. However in case of dispute the method prescribed in IS 686 : 1985 shall be considered as referee method.)	-	100	-
Cl.4.1.2 Binding Material(IS 1954 : 1990) (IS1969 : 1985)(Cotton tape NEWAR used as binding material shall conform to the requirements prescribed in col 3 of Table 2, when tested in accordance with the methods referred to in col 4 of the table.)	-	100	-
Cl.4.1.2.1 Anmex B.(Cotton, manmade or blended shall be used as binding material.' 'Coloured cotton tapes shall have fastness to day light of rating as and if agreed to between the purchaser and the supplier when tested in accordance with IS 686 : 1985. The black tapes shall be free from sulphur dyes when tested in accordance with Annex B.')	-	100	-
Cl.4.1.3.1( Sewing thread cotton, manmade or blended shall be used for stitching of upper. For cotton variety thread shall conform to variety No. 28 of IS 1720. Polyester variety thread shall conform to variety No. 9 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification. Sewing thread cotton, manmade or blended shall be used for binding of upper. For cotton variety thread shall conform to variety No. 32 of IS 1720. Polyester variety thread shall conform to variety No. 5 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification.')	-	100	-
Cl.4.1.4(.Brass, steel or aluminium eyelets of 7.5 mm diameter and wall thickness 0.30 to 0.35 mm shall be used.')	-	100	-
Cl.4.1.5 Laces( The shoes shall be provided with fabric braided laces either matching the shade of the upper or black or The length of the lace shall be 60 ± 3 cm )	-	100	-
Cl.4.1.5 Laces(and shallhave the breaking strength of not less than 250 N when tested between 18 cm grips in accordance with IS 1969 : 1985, the rate of traverse of power actuated grip being 300 mm/min.)	-	100	-
Cl.4.1.5 Laces Annex B(In case the laces are black, the same shall pass the test for freedom from sulpher dyes when tested in accordance with Annex B. The two ends of the lace shall be provided with suitable metal or plastic tips.)	-	100	-
Cl.4.1.6 Rubber Components(The rubber components shall conform to the requirements given in Table 4, when tested from finished boots.However in case it is not possible to cut the test pieces from the made up boots then 4.1.5.3 of IS 13695 : 1993 shall be followed.')	-	100	-
Cl.4.1.6.2 Ageing col 4 of Table 5.(The shoes shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the shoes shall conform to the physical requirements prescribed in col 4 of Table 5. )	-	100	-
Cl.4.1.6.2 Ageing (None of the rubber components of the shoes shall show any sign of tackiness or crack developed after ageing, when examined visually)	-	100	-
Cl.4.1.6.3 Thickness of components in Table 6.(Individual components of the shoes shall comply with the thickness and material requirements prescribed in Table 6.)	-	100	-
Cl.4.3 Construction Cl 4.3.1( The upper shall be stitched on a lock stitch machine and the number of stitches shall be 30 to 40 per dm.)	-	100	-
Cl.4.4 Adhesion Test(From the upper-foxing portion where it is adhered to the canvas, parallel to the waist of sole, cut a strip of length 100 mm and width 8 mm. Separate out the plies initially by breaking the bond to a length of about 75 mm. Carry out the test on two specimens in accordance with IS 3400 (Part 5) : 1986. There shall be no further separation within 1 minute at a load of 1 kg for each of the two specimens.)	-	100	-
CL.4.6 Mass(The mass of one pair of finished shoes of size 8 shall not exceed 750 g with an increase or decrease of 25 g for each bigger or smaller size respectively)	-	100	-
4.8(Adhesion )	-	100	-
4.7(Consolidation test )	-	100	-
4.6(Mass )	-	100	-
4.5(Finish )	-	100	-
4.4(Contruction )	-	100	-
4.3(Leg Height )	-	100	-
4.2(Design )	-	100	-
4.1.6.2(Thickness of components )	-	100	-
4.1.6.2(Ageing)	-	100	-
4.1.6.2(Elongation at break after ageing )	-	100	-
4.1.6.2(Tensile after ageing )	-	100	-
4.1.6(Compression set )	-	100	-
4.1.6(Elongation at break )	-	100	-
4.1.6(Tensile strength)	-	100	-
4.1.6(Hardness (after accelerated ))	-	100	-
4.1.6(Flexing resistance test)	-	100	-
4.1.6(Hardness )	-	100	-
4.1.6(Relative density)	-	100	-
4.1.5(Sulpher dyes content )	-	100	-
4.1.5(Breaking Load )	-	100	-
4.1.5(Length )	-	100	-
4.1.4(Thickness)	-	100	-
4.1.4(Size )	-	100	-
4.1.3(Color fastness to perspiration)	-	100	-
4.1.3(Colorfastness to washing)	-	100	-
4.1.3(Colorfastness to light )	-	100	-
4.1.3(Single thread breaking load)	-	100	-
4.1.1.2(Colorfastness to washing)	-	100	-
4.1.1.1(Colorfastness to light )	-	100	-
4.1.1 (Drill) (End & Picks/dm)	-	100	-
4.1.1 (canvas )(End & Picks/dm)	-	100	-
4.1.1 (canvas )(Breaking Load )	-	100	-
5, 5.1, Cl. 5.2, Cl. 5.2.1, Cl. 5.2.1.1(Packing and marking)	-	100	-
" CL. 5.1, Cl. 5.2, Cl. 5.2.1, Cl. 5.2.1.1(Packing and marking ")	-	100	-
Cl.4.3.3(The edges of quarter shall be bound with dyed cotton binding material or matching to the colour of the upper, cut in bias and formed as a tape.)	-	100	-
Cl.4.3.4 (The vantp shall be strengthened with a rubber toe-cap (see Fig. 1).)	-	100	-
Cl.4.3.5( Five pairs of eyelets shall be fitted in each shoe. The eyelets shall be properly clenched without any distortion. It shall properly match the colour of the upper canvas, or as agreed to between the purchaser and the supplier.)	-	100	-
Cl.4.3.6( The shoes shall be free from folds, wrinkles in the upper, blisters, embedded foreign matters and excessive surface markings. In appearance, general workmanship, finish and all other respects, not defined in the standard, the shoes shall be similar to the sample approved by the purchaser, if any)	-	100	-
CL.4.3.7( The soles shall be of even substance and ofone layer only.)	-	100	-
Cl.4.3.8( A rubber foxing shall be fixed all round the sole and heel. The colour shall be as agreed to between the purchaser and the supplier. )	-	100	-
Cl.4.3.8(The foxing, not less than 18 mm wide, shall not extend beyond the edges of the sole at the bottom)	-	100	-
Cl.4.3.3(The edges of quarter shall be bound with dyed cotton binding material or matching to the colour of the upper, cut in bias and formed as a tape.)	-	100	-
Cl.4.3.4 (The vantp shall be strengthened with a rubber toe-cap (see Fig. 1).)	-	100	-
Cl.4.3.5( Five pairs of eyelets shall be fitted in each shoe. The eyelets shall be properly clenched without any distortion. It shall properly match the colour of the upper canvas, or as agreed to between the purchaser and the supplier.)	-	100	-
Cl.4.3.6( The shoes shall be free from folds, wrinkles in the upper, blisters, embedded foreign matters and excessive surface markings. In appearance, general workmanship, finish and all other respects, not defined in the standard, the shoes shall be similar to the sample approved by the purchaser, if any)	-	100	-
CL.4.3.7( The soles shall be of even substance and ofone layer only.)	-	100	-
Cl.4.3.8( A rubber foxing shall be fixed all round the sole and heel. The colour shall be as agreed to between the purchaser and the supplier. )	-	100	-
Cl.4.3.8(The foxing, not less than 18 mm wide, shall not extend beyond the edges of the sole at the bottom)	-	100	-
CL.4.2 Shape and Design IS 1638 : 1969(Cl 4.2.1 The shoes shall be made according to design and pattern as agreed to between the purchaser and the supplier. Size and fittings of the shoes shall be in accordance with IS 1638 : 1969 unless otherwise specified by the purchaser.)	-	200	-
Cl.4.2.2( The recommended design of canvas shoes is shown in Fig. 1.)	-	200	-
Cl.'4.3.2( Back of the upper shall be reinforced with a strip of upper material when there is a seam.')	-	200	-
Cl.4.3.3( The counter shall be stitched at the back, set from bottom of lining and bound flat on top edge with white/scoured binding material cut in bias and formed as a tape. T )	-	200	-
Cl.4.3.3(he number of stitches shall be 30 to 40 per decimetre. The counter binding shall meet the binding of the upper at the centre top edge of the heel.)	-	200	-
Cl.4.3.3(The edges of quarter shall be bound with dyed cotton binding material or matching to the colour of the upper, cut in bias and formed as a tape.)	-	200	-
Cl.4.3.4 (The vantp shall be strengthened with a rubber toe-cap (see Fig. 1).)	-	200	-
Cl.4.3.5( Five pairs of eyelets shall be fitted in each shoe. The eyelets shall be properly clenched without any distortion. It shall properly match the colour of the upper canvas, or as agreed to between the purchaser and the supplier.)	-	200	-
Cl.4.3.6( The shoes shall be free from folds, wrinkles in the upper, blisters, embedded foreign matters and excessive surface markings. In appearance, general workmanship, finish and all other respects, not defined in the standard, the shoes shall be similar to the sample approved by the purchaser, if any)	-	200	-
CL.4.3.7( The soles shall be of even substance and ofone layer only.)	-	200	-
Cl.4.3.8( A rubber foxing shall be fixed all round the sole and heel. The colour shall be as agreed to between the purchaser and the supplier. )	-	200	-
Cl.4.3.8(The foxing, not less than 18 mm wide, shall not extend beyond the edges of the sole at the bottom)	-	200	-
4.1.2(Colorfastness to light )	-	200	-
4.1.2(Colorfastness to washing)	-	200	-
4.1.2(Breaking Strength )	-	200	-
4.1.2(Width )	-	200	-
Cl.4.1.3.2 (IS 2454 : 1985) IS 765 : 1979 IS 971 : 1966( The colour of the threads shall be as agreedto between the purchaser and the supplier. The dyed threads shall conform to the following requirements or IS 686 : 1985'.)	-	200	-
Cl.4.1.3.2 (IS 2454 : 1985) IS 765 : 1979 IS 971 : 1966( The colour of the threads shall be as agreedto between the purchaser and the supplier. The dyed threads shall conform to the following requirements or IS 686 : 1985'.)	-	200	-
4.1.3(Construction )	-	200	-
4.1.1 (Drill) (Colorfastness to light )	-	200	-

-
Included w.e.f 27.11.2024

8417

International Testing Centre, MSME Technology Development Centre, Meerut

8177804

IS 17043 : Part 2 (2024)

Shoes: Shoes for General Purpose

42500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Shape and Design)	-	500	-
Cl-5.3(Material)	-	500	-
Cl-5.4, Table-1 (i)(Bond strength, N/mm, Min Upper to outsole, N/mm, Min)	-	500	-
Cl-5.4, Table-1 (ii)(Inter layer bond strength,= N/mm, Min Midsole to outsole, N/mm, Min)	-	500	-
Cl-5.4, Table-1 (iii)(Whole shoe flexing, flexes)	-	1000	-
Cl-5.4, Table-1 (iv)(Water proofness on complete shoe)	-	1000	-
Cl-5.4, Table-1 (v)(Slip resistance, Cof(1), Min dry and wet* (quarry tile))	-	1500	-
Cl-5.4, Table-1 (vi)(Attachment strength of strap and buckle/D-ring N)	-	500	-
Cl-5.4, Table-1 (vii)(Attachment strength of strap and velcro , N, Min)	-	500	-
Cl-5.4, Table-1 (viii)(Strength of eyelet attachment, N, Min)	-	500	-
Cl-5.4, Table-1 (ix)(Heel pull off strength, N, Min)	-	500	-
Cl-5.4, Table-1 (x)(Top piece attachment strength, N, Min)	-	500	-
Cl-5.4, Table-1 (xi)(Seam strength, N/mm, Min)	-	50	-
Cl-5.4, Table-1 (xii)(Whole shoe topline strength, N, Min)	-	500	-
Cl-5.4, Table-1 (xiii)(Abrasion resistance (volume loss), mm3)	-	1000	-
Cl-5.4, Table-1 (xiv)(Chemical requirements(3))	-	20000	-
Cl-5.4, Table-1 (xv)(Lead content (as Pb) ppm, Max)	-	2000	-
Cl-5.4, Table-1 (xvi)(Hydrolysis resistance,(4) cut growth at 150 000 flexes, mm, Max)	-	1000	-
Cl-6.1.1, Table-2 (i)(Tear trength, N)	-	500	-
Cl-6.1.1, Table-2 (ii)(Flexing resistance, flexes)	-	1000	-
Cl-6.1.1, Table-2 (iii)(Colour fastness to rubbing (marring/staining))	-	500	-
Cl-6.1.1, Table-2 (iv)(Colour fastness to water (contact method- multi fabrics))	-	500	-
Cl-6.1.1, Table-2 (v)(Water vapour permeability,mg/cm2 /h, Min Water vapour coefficient,mg/cm2 , Min)	-	1000	-
Cl-6.1.1, Table-2 (vi)(Stitch tear strength, N/mm, Min)	-	500	-
Cl-6.1.1, Table-2 (vii)(Abrasion resistance)	-	1000	-
Cl-6.1.2, Table-3 (i)(Colour fastness to light, Marring, Min)	-	1500	-
Cl-6.1.2, Table-3 (ii)(Water resistance)	-	500	-
Cl-6.1.2, Table-3 (iii)(Flexing resistance, flexes at (-) 5 °C 25 000 flexes)	-	800	-
Cl-6.1.3, Table- 4 (i)(Breaking strength, N/mm, Min Elongation at break, percent, Min)	-	500	-
Cl-6.1.3, Table- 4 (ii)(Tear Strength, N, Min)	-	500	-
Cl-6.1.3, Table- 4 (iii)(Strength at needle perforation, N/mm, Min)	-	500	-
Cl-6.1.3, Table- 4 (iv)(Flexing resistance, Flexes)	-	800	-
Cl-6.1.3, Table- 4 (v)(Water vapour permeability (WVP), mg/cm2 /h, Min)	-	1000	-
Cl-6.1.3, Table- 4 (vi)(Hydrolysis resistance)	-	2000	-
Cl-6.1.3, Table- 4 (vii)(Abrasion resistance)	-	800	-
Cl-6.1.4, Table-5 (i)(Colour fastness to light, Marring, Min)	-	1500	-
Cl-6.1.4, Table- 5 (ii)(Flexing resistance, flexes at (-) 5 ºC, s 25 000 flexes)	-	700	-
Cl-6.2, Table-6 (i)(Tear strength, N, Min)	-	500	-
Cl-6.2, Table-6 (ii)(Abrasion resistance)	-	1000	-
Cl-6.2, Table-6 (iii)(Colour fastness rubbing (crocking))	-	500	-
Cl-6.2, Table-6 (iv)(Colour fastness to perspiration)	-	500	-
Cl-6.2, Table-6 (v)(Water vapour permeability, mg/cm2 /h, Min Water vapour coefficient, mg/cm2, Min)	-	800	-
Cl-6.3, Table-7 (ii)(Abrasion resistance at 400 cycles)	-	500	-
Cl-6.3, Table-7 (iii)(Water absorption, mg/cm2 , Min Water desorption, percent, Min)	-	500	-
Cl-6.4, Table-8 (i)(Thickness, mm, Min)	-	300	-
Cl-6.4, Table-8 (ii)(Abrasion resistance)	-	800	-
Cl-6.4, Table-8 (iii)(Water absorption, mg/cm2 , Min Water desorption, percent, Min)	-	500	-
Cl-6.5.1, , Table-9 (i)(Flexing resistance)	-	500	-
Cl-6.5.1, , Table-9 (ii)(Hydrolysis resistance, cut growth at 150 000 flexes, mm, Max)	-	2000	-
Cl-6.5.1, , Table-9 (iii)(Compression set, percent, Max)	-	800	-
Cl-6.5.2.1, Table-10 (i)(Grain crack index, Min)	-	500	-
Cl-6.5.2.1, Table-10 (ii)(Density, g/cm3 , Min)	-	300	-
Cl-6.5.2.2, Table-11 (i)(Water resistance, (dynamic method))	-	800	-
Cl-6.5.2.3, Table-12 (i)(Hardness, Min)	-	300	-
Cl-6.5.2.3, Table-12 (ii)(Density, g/cm3 , Max)	-	300	-
Cl-6.5.2.3, Table-12 (iii)(Abrasion resistance (volume loss), mm3 , Max)	-	800	-
Cl-6.5.2.3, Table-12 (iv)(Bond Strength between Rubber top-lift and adjacent material, N/mm, Min)	-	500	-
Cl-6.6, Table-13 (i)(Heat shrinkage, percent, Max)	-	500	-
Cl-6.6, Table-13 (ii)(Split tear strength, kg/25 mm, Min)	-	500	-
Cl-6.6, Table-13 (iii)(Compression set, percent, Max)	-	800	-
Cl-6.7, Table-14 (i)(Hardness, N)	-	300	-
Cl-6.7, Table-14 (ii)(Resilience, percent)	-	800	-
Cl-6.7, Table-14 (iii)(Moisture resistance, percent)	-	500	-
Cl-6.10, Table-17 (i)(Lace breaking strength, N, Min)	-	500	-
Cl-6.10, Table-17 (ii)(Lace tag strength, N, Min)	-	500	-
Cl-6.10, Table-17 (iii)(Lace to lace abrasion resistance, cycles)	-	500	-
Cl-6.10, Table-17 (iv)(Colour fastness to water for lace contact methodstaining Gray scale rate , Min)	-	500	-
Cl-6.10, Table-17 (v)(Corrosion resistance)	-	500	-
Cl-6.11, Table-18 (i)(Fatigue resistance, cycles, Min)	-	500	-
Cl-6.11, Table-18 (ii)(Security of puller attachment strength, N, Min)	-	500	-
Cl-6.11, Table-18 (iii)(Lateral load, N, Min)	-	1000	-
Cl-6.11, Table-18 (iv)(End attachment strength, N, Min)	-	500	-
Cl-8.1(Marking)	-	300	-
Cl-6.7, Table-14 (iv)(Area shape retention, percent (a) Initial, Min b) After 10 collapsing load, Min)	-	500	-
Cl-6.7, Table-14 (v)(Adhesion strength, N/mm)	-	500	-
Cl-6.8, Table-15 (i)(Peel strength, N/mm a) Initial, Min b) After 5 000 wear cycles, Min)	-	500	-
Cl- 6.8, Table-15 (ii)(a) Shear strength, kPa b) Initial, Min)	-	500	-
Cl- 6.9, Table-16 (i)(Limit of useful extension, percent, Min)	-	500	-
Cl- 6.9, Table-16 (ii)(Needle strength, N/mm, Min)	-	500	-
Cl-5.1(Shape and Design)	-	300	-
Cl-5.3(Material)	-	300	-
Cl-5.4, Table-1 (i)(Bond strength, N/mm, Min Upper to outsole, N/mm, Min)	-	500	-
Cl-5.4, Table-1 (ii)(Inter layer bond strength,= N/mm, Min Midsole to outsole, N/mm, Min)	-	500	-
Cl-5.4, Table-1 (iii)(Whole shoe flexing, flexes)	-	1500	-
Cl-5.4, Table-1 (iv)(Water proofness on complete shoe)	-	1500	-
Cl-5.4, Table-1 (v)(Slip resistance, Cof(1), Min dry and wet* (quarry tile))	-	1500	-
Cl-5.4, Table-1 (vi)(Attachment strength of strap and buckle/D-ring N)	-	500	-
Cl-5.4, Table-1 (vii)(Attachment strength of strap and velcro , N, Min)	-	500	-
Cl-5.4, Table-1 (viii)(Strength of eyelet attachment, N, Min)	-	500	-
Cl-5.4, Table-1 (ix)(Heel pull off strength, N, Min)	-	500	-
Cl-5.4, Table-1 (x)(Top piece attachment strength, N, Min)	-	500	-
Cl-5.4, Table-1 (xi)(Seam strength, N/mm, Min)	-	500	-
Cl-5.4, Table-1 (xii)(Whole shoe topline strength, N, Min)	-	1500	-
Cl-5.4, Table-1 (xiii)(Abrasion resistance (volume loss), mm3)	-	800	-
Cl-5.4, Table-1 (xiv)(Chemical requirements(3))	-	30000	-
Cl-5.4, Table-1 (xv)(Lead content (as Pb) ppm, Max)	-	1000	-
Cl-5.4, Table-1 (xvi)(Hydrolysis resistance,(4) cut growth at 150 000 flexes, mm, Max)	-	1500	-
Cl-6.1.1, Table-2 (i)(Tear trength, N)	-	500	-
Cl-6.1.1, Table-2 (ii)(Flexing resistance, flexes)	-	1500	-
Cl-6.1.1, Table-2 (iii)(Colour fastness to rubbing (marring/staining))	-	800	-
Cl-6.1.1, Table-2 (iv)(Colour fastness to water (contact method- multi fabrics))	-	800	-
Cl-6.1.1, Table-2 (v)(Water vapour permeability,mg/cm2 /h, Min Water vapour coefficient,mg/cm2 , Min)	-	500	-
Cl-6.1.1, Table-2 (vi)(Stitch tear strength, N/mm, Min)	-	500	-
Cl-6.1.1, Table-2 (vii)(Abrasion resistance)	-	800	-
Cl-6.1.2, Table-3 (i)(Colour fastness to light, Marring, Min)	-	800	-
Cl-6.1.2, Table-3 (ii)(Water resistance)	-	1000	-
Cl-6.1.2, Table-3 (iii)(Flexing resistance, flexes at (-) 5 °C 25 000 flexes)	-	800	-
Cl-6.1.3, Table- 4 (i)(Breaking strength, N/mm, Min Elongation at break, percent, Min)	-	500	-
Cl-6.1.3, Table- 4 (ii)(Tear Strength, N, Min)	-	500	-
Cl-6.1.3, Table- 4 (iii)(Strength at needle perforation, N/mm, Min)	-	500	-
Cl-6.1.3, Table- 4 (iv)(Flexing resistance, Flexes)	-	800	-
Cl-6.1.3, Table- 4 (v)(Water vapour permeability (WVP), mg/cm2 /h, Min)	-	800	-
Cl-6.1.3, Table- 4 (vi)(Hydrolysis resistance)	-	1500	-
Cl-6.1.3, Table- 4 (vii)(Abrasion resistance)	-	800	-
Cl-6.1.4, Table-5 (i)(Colour fastness to light, Marring, Min)	-	500	-
Cl-6.1.4, Table- 5 (ii)(Flexing resistance, flexes at (-) 5 ºC, s 25 000 flexes)	-	800	-
Cl-6.2, Table-6 (i)(Tear strength, N, Min)	-	500	-
Cl-6.2, Table-6 (ii)(Abrasion resistance)	-	800	-
Cl-6.2, Table-6 (iii)(Colour fastness rubbing (crocking))	-	500	-
Cl-6.2, Table-6 (iv)(Colour fastness to perspiration)	-	500	-
Cl-6.2, Table-6 (v)(Water vapour permeability, mg/cm2 /h, Min Water vapour coefficient, mg/cm2, Min)	-	500	-
Cl-6.3, Table-7 (ii)(Abrasion resistance at 400 cycles)	-	800	-
Cl-6.3, Table-7 (iii)(Water absorption, mg/cm2 , Min Water desorption, percent, Min)	-	500	-
Cl-6.4, Table-8 (i)(Thickness, mm, Min)	-	300	-
Cl-6.4, Table-8 (ii)(Abrasion resistance)	-	800	-
Cl-6.4, Table-8 (iii)(Water absorption, mg/cm2 , Min Water desorption, percent, Min)	-	500	-
Cl-6.5.1, , Table-9 (i)(Flexing resistance)	-	1500	-
Cl-6.5.1, , Table-9 (ii)(Hydrolysis resistance, cut growth at 150 000 flexes, mm, Max)	-	1500	-
Cl-6.5.1, , Table-9 (iii)(Compression set, percent, Max)	-	1000	-
Cl-6.5.2.1, Table-10 (i)(Grain crack index, Min)	-	300	-
Cl-6.5.2.1, Table-10 (ii)(Density, g/cm3 , Min)	-	300	-
Cl-6.5.2.2, Table-11 (i)(Water resistance, (dynamic method))	-	800	-
Cl-6.5.2.3, Table-12 (i)(Hardness, Min)	-	300	-
Cl-6.5.2.3, Table-12 (ii)(Density, g/cm3 , Max)	-	300	-
Cl-6.5.2.3, Table-12 (iii)(Abrasion resistance (volume loss), mm3 , Max)	-	800	-
Cl-6.5.2.3, Table-12 (iv)(Bond Strength between Rubber top-lift and adjacent material, N/mm, Min)	-	500	-
Cl-6.6, Table-13 (i)(Heat shrinkage, percent, Max)	-	800	-
Cl-6.6, Table-13 (ii)(Split tear strength, kg/25 mm, Min)	-	500	-
Cl-6.6, Table-13 (iii)(Compression set, percent, Max)	-	500	-
Cl-6.7, Table-14 (i)(Hardness, N)	-	300	-
Cl-6.7, Table-14 (ii)(Resilience, percent)	-	500	-
Cl-6.7, Table-14 (iii)(Moisture resistance, percent)	-	500	-
Cl-6.10, Table-17 (i)(Lace breaking strength, N, Min)	-	500	-
Cl-6.10, Table-17 (ii)(Lace tag strength, N, Min)	-	500	-
Cl-6.10, Table-17 (iii)(Lace to lace abrasion resistance, cycles)	-	800	-
Cl-6.10, Table-17 (iv)(Colour fastness to water for lace contact methodstaining Gray scale rate , Min)	-	500	-
Cl-6.10, Table-17 (v)(Corrosion resistance)	-	800	-
Cl-6.11, Table-18 (i)(Fatigue resistance, cycles, Min)	-	500	-
Cl-6.11, Table-18 (ii)(Security of puller attachment strength, N, Min)	-	500	-
Cl-6.11, Table-18 (iii)(Lateral load, N, Min)	-	800	-
Cl-6.11, Table-18 (iv)(End attachment strength, N, Min)	-	500	-
Cl-8.1(Marking)	-	300	-
Cl-6.7, Table-14 (iv)(Area shape retention, percent (a) Initial, Min b) After 10 collapsing load, Min)	-	500	-
Cl-6.7, Table-14 (v)(Adhesion strength, N/mm)	-	500	-
Cl-6.8, Table-15 (i)(Peel strength, N/mm a) Initial, Min b) After 5 000 wear cycles, Min)	-	500	-
Cl- 6.8, Table-15 (ii)(a) Shear strength, kPa b) Initial, Min)	-	500	-
Cl- 6.9, Table-16 (i)(Limit of useful extension, percent, Min)	-	500	-
Cl- 6.9, Table-16 (ii)(Needle strength, N/mm, Min)	-	800	-
Cl-6.3, Table-7 (i)(Flexing index, Min)	-	1500	-
Cl-6.5.2.1, Table-10 (iii)(Abrasion resistance, mm/kcs, Max)	-	800	-
CL. 5.4, Table 1, Sl No (xiv) & Table 1 of IS 17011(pH, Min)	-	500	-
CL. 5.4, Table 1, Sl No (xv)("Lead content (as Pb) ppm, Max (applicable only for PVC")	-	1000	-

15 Apr, 2027

-
Included w.e.f.29.11.2024

8418

Ahmedabad Textile Industry's Research Association (ATIRA), Ahmedabad

7173002

IS 17070 (2019)

Jute agrotextiles for growth of plant and suppression of weeds – Specification

7900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5 -Table 1 -(i)(Mass at 20 percent moisture regain)	-	800	-
5 -Table 1 -(ii)(Thickness)	-	450	-
5 -Table 1 -(iii)(Width)	-	200	-
5 -Table 1 -(iv)(Wide width tensile strength)	-	1650	-
5 -Table 1 -(v)(Tear strength)	-	900	-
5 -Table 1 -(vi)(Bursting strength)	-	800	-
5 -Table 1 -(vii)(Index Puncture resistance)	-	1350	-
5 -Table 1 -(viii)(Air permeability)	-	650	-
5-Table 1 -(ix)(Water permittivity)	-	1100	-

-
Included w.e.f 10.10.2024 Excluding Cl 8 (Marking)

8419

DELHI TEST HOUSE, Azadhpur

8131406

IS 210 (2009)

Grey iron castings - Specification (First Revision)

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1(FREEDOM FROM DEFECTS)	-	500	TESTING CHARGES :-Rs.9000/-
10.2(FREEDOM FROM DEFECTS)	-	500	TESTING CHARGES :-Rs.9000/-
15, Table 3(TENSIL.E TEST- IS 1608 Part1 )	-	2000	TESTING CHARGES :-Rs.9000/-
16, Table 3(Hardness Test)	-	1000	TESTING CHARGES :-Rs.9000/-
6(Chemical Composition(chemical composition shall be as agreed to between the purchaser and the manufacturer.))	-	5500	TESTING CHARGES :-Rs.9000/-
10.1(FREEDOM FROM DEFECTS)	-	500	TESTING CHARGES :-Rs.9000/-
10.2(FREEDOM FROM DEFECTS)	-	500	TESTING CHARGES :-Rs.9000/-
15, Table 3(TENSIL.E TEST- IS 1608 Part1 )	-	2000	TESTING CHARGES :-Rs.9000/-
16, Table 3(Hardness Test)	-	1000	TESTING CHARGES :-Rs.9000/-
21(Marking)	-	250	TESTING CHARGES :-Rs.9000/-
6(Chemical Composition(chemical composition shall be as agreed to between the purchaser and the manufacturer.))	-	5500	TESTING CHARGES :-Rs.9000/-

17 Jun, 2027

-
Included w.e.f 15.10.2024 Excluding Cl 9 (Microstructure) Optional Test

8420

Stellar Test House, Noida

8171606

IS 1293 (2019)

Plugs and socket - Outlets of rated Voltage up to and including 250 Volts and rated current up to and including 16 amperes - Specification (Third Revision)

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(RATINGS)	-	20	5% discount for BIS
7.1.1(Accessories Classification)	-	20	5% discount for BIS
7.1.2(Accessories Classification)	-	20	5% discount for BIS
7.1.3(Accessories Classification)	-	20	5% discount for BIS
7.1.4(Accessories Classification)	-	20	5% discount for BIS
7.1.5(Accessories Classification)	-	20	5% discount for BIS
7.2.1(Socket-Outlets Classification)	-	20	5% discount for BIS
7.2.2(Socket-Outlets Classification)	-	20	5% discount for BIS
7.2.3(Socket-Outlets Classification)	-	20	5% discount for BIS
7.2.4(Socket-Outlets Classification)	-	20	5% discount for BIS
7.3(Plug Classification)	-	20	5% discount for BIS
8(Marking)	-	20	5% discount for BIS
9(CHECKING OF DIMENSIONS)	-	50	5% discount for BIS
10(PROTECTION AGAINST ELECTRIC SHOCK)	-	50	5% discount for BIS
11(Provision for earthing)	-	50	5% discount for BIS
12(terminals)	-	50	5% discount for BIS
13.1(Construction of fixed Socket Outlets)	-	50	5% discount for BIS
13.2(Construction of fixed Socket Outlets)	-	50	5% discount for BIS
13.3(Construction of fixed Socket Outlets)	-	50	5% discount for BIS
13.4(Construction of fixed Socket Outlets)	-	50	5% discount for BIS
13.5(Construction of fixed Socket Outlets)	-	50	5% discount for BIS
13.6(Construction of fixed Socket Outlets)	-	50	5% discount for BIS
13.7(Construction of fixed Socket Outlets)	-	50	5% discount for BIS
13.8(Construction of fixed Socket Outlets)	-	50	5% discount for BIS
13.9(Construction of fixed Socket Outlets)	-	50	5% discount for BIS
13.10(Construction of fixed Socket Outlets)	-	50	5% discount for BIS
13.11(Construction of fixed Socket Outlets)	-	50	5% discount for BIS
13.12(Construction of fixed Socket Outlets)	-	50	5% discount for BIS
13.13(Construction of fixed Socket Outlets)	-	50	5% discount for BIS
13.14(Construction of fixed Socket Outlets)	-	50	5% discount for BIS
13.15(Construction of fixed Socket Outlets)	-	50	5% discount for BIS
13.16(Construction of fixed Socket Outlets)	-	50	5% discount for BIS
13.17(Construction of fixed Socket Outlets)	-	50	5% discount for BIS
13.18(Construction of fixed Socket Outlets)	-	50	5% discount for BIS
13.19(Construction of fixed Socket Outlets)	-	50	5% discount for BIS
13.2(Construction of fixed Socket Outlets)	-	50	5% discount for BIS
13.21(Construction of fixed Socket Outlets)	-	50	5% discount for BIS
13.22(Construction of fixed Socket Outlets)	-	50	5% discount for BIS
13.23(Construction of fixed Socket Outlets)	-	50	5% discount for BIS
14.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	5% discount for BIS
14.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	5% discount for BIS
14.3(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	5% discount for BIS
14.4(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	5% discount for BIS
14.5(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	5% discount for BIS
14.6(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	5% discount for BIS
14.7(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	5% discount for BIS
14.8(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	5% discount for BIS
14.9(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	5% discount for BIS
14.10(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	5% discount for BIS
14.11(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	5% discount for BIS
14.12(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	5% discount for BIS
14.13(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	5% discount for BIS
14.14(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	5% discount for BIS
14.15(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	5% discount for BIS
14.16(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	5% discount for BIS
14.17(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	5% discount for BIS
14.18(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	5% discount for BIS
14.19(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	5% discount for BIS
14.20(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	5% discount for BIS
14.21(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	5% discount for BIS
14.22(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	5% discount for BIS
14.23(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	5% discount for BIS
14.24(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	5% discount for BIS
14.25(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	5% discount for BIS
14.26(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	5% discount for BIS
15(INTERLOCKED SOCKET-OUTLETS)	-	50	5% discount for BIS
16.1(Resistance to Ageing)	-	250	5% discount for BIS
16.2(RESISTANCE TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	260	5% discount for BIS
16.3(Resistance to Humidity)	-	250	5% discount for BIS
17.1(RESISTANCE AND ELECTRIC STRENGTH)	-	200	5% discount for BIS
17.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	200	5% discount for BIS
17.3(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	200	5% discount for BIS
18(OPERATION OF EARTHING CONTACTS)	-	100	5% discount for BIS
19(TEMPERATURE RISE)	-	300	5% discount for BIS
20(Making & Breaking Capacity)	-	400	5% discount for BIS
21(Normal Operation)	-	400	5% discount for BIS
22.1(Verification of the Maximum Withdrawal Force)	-	50	5% discount for BIS
22.2(Verification of Minimum Withdrawal Force)	-	50	5% discount for BIS
23.1(FLEXIBLE CABLES AND THEIR CONNECTION)	-	50	5% discount for BIS
23.2(FLEXIBLE CABLES AND THEIR CONNECTION)	-	50	5% discount for BIS
23.3(FLEXIBLE CABLES AND THEIR CONNECTION)	-	50	5% discount for BIS
23.4(FLEXIBLE CABLES AND THEIR CONNECTION)	-	50	5% discount for BIS
24.1(MECHANICAL STRENGTH For all kinds of fixed socketoutlets)	-	200	5% discount for BIS
24.1(MECHANICAL STRENGTH For portable multiple and combined socket outlets with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	200	5% discount for BIS
24.1(MECHANICAL STRENGTH For surface mounting boxes)	-	200	5% discount for BIS
24.2(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	200	5% discount for BIS
24.2(MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	200	5% discount for BIS
24.2(MECHANICAL STRENGTH For plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	200	5% discount for BIS
24.2(MECHANICAL STRENGTH For plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	200	5% discount for BIS
24.3(MECHANICAL STRENGTH for fixed socket-outlets with a main part intended to be mounted directly on a surface)	-	200	5% discount for BIS
24.4(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	200	5% discount for BIS
24.4(MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	200	5% discount for BIS
24.5(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	200	5% discount for BIS
24.5(MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	200	5% discount for BIS
24.5(MECHANICAL STRENGTH For Plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	200	5% discount for BIS
24.6(MECHANICAL STRENGTH For screwed glands of accessories having an IP code higher than IP20)	-	200	5% discount for BIS
24.7(MECHANICAL STRENGTH For plug pins provided with insulating sleeves)	-	200	5% discount for BIS
24.8(MECHANICAL STRENGTH For shuttered socketoutlets)	-	200	5% discount for BIS
24.9(MECHANICAL STRENGTH For portable multiple and combined socket outlets (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	200	5% discount for BIS
24.9(MECHANICAL STRENGTH For portable multiple and combined socket outlets (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	200	5% discount for BIS
24.10(MECHANICAL STRENGTH For Plug (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	200	5% discount for BIS
24.10(MECHANICAL STRENGTH For Plug (1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	200	5% discount for BIS
24.11(MECHANICAL STRENGTH For portable socketoutlets having means for suspension on a wall)	-	200	5% discount for BIS
24.12(MECHANICAL STRENGTH For portable socketoutlets having means for suspension on a wall)	-	200	5% discount for BIS
24.13(MECHANICAL STRENGTH For portable socketoutlets having means for suspension on a wall)	-	200	5% discount for BIS
24.14.1(MECHANICAL STRENGTH For fixed socket-outlets)	-	200	5% discount for BIS
24.14.2(MECHANICAL STRENGTH For fixed socket-outlets)	-	200	5% discount for BIS
24.14.3(MECHANICAL STRENGTH For plugs and portable socketoutlets)	-	200	5% discount for BIS
24.15(MECHANICAL STRENGTH)	-	200	5% discount for BIS
24.16(MECHANICAL STRENGTH)	-	200	5% discount for BIS
24.16(MECHANICAL STRENGTH For shroud of portable socket-outlets)	-	200	5% discount for BIS
25.1(Resistance to heat)	-	200	5% discount for BIS
25.2(Resistance to heat)	-	200	5% discount for BIS
25.3(Resistance to heat)	-	200	5% discount for BIS
25.4(Resistance to heat)	-	200	5% discount for BIS
26.1(SCREWS, CURRENTCARRYING PARTS AND CONNECTIONS)	-	100	5% discount for BIS
26.2(SCREWS, CURRENTCARRYING PARTS AND CONNECTIONS)	-	100	5% discount for BIS
26.3(SCREWS, CURRENTCARRYING PARTS AND CONNECTIONS)	-	100	5% discount for BIS
26.4(SCREWS, CURRENTCARRYING PARTS AND CONNECTIONS)	-	100	5% discount for BIS
26.5(SCREWS, CURRENTCARRYING PARTS AND CONNECTIONS)	-	100	5% discount for BIS
26.6(SCREWS, CURRENTCARRYING PARTS AND CONNECTIONS)	-	100	5% discount for BIS
26.7(SCREWS, CURRENTCARRYING PARTS AND CONNECTIONS)	-	100	5% discount for BIS
27.1(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	50	5% discount for BIS
27.2(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	100	5% discount for BIS
27.3(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	100	5% discount for BIS
28.1.1(Glow-Wire Test)	-	200	5% discount for BIS
28.2(Resistance to Tracking)	-	200	5% discount for BIS
29(Resistance to Rusting)	-	200	5% discount for BIS
30.1(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Pressure Test at High Temperature)	-	200	5% discount for BIS
30.2(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Static Damp Heat Test)	-	200	5% discount for BIS
30.3(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Tests at Low Temperature)	-	200	5% discount for BIS
30.4(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Impact Test at Low Temperature)	-	200	5% discount for BIS

26 Sep, 2028

-
included w.e.f.01.11.2024

8421

BIS, Central Laboratory (CL)

None

IS 3854 (2023)

Switches for Domestic and Similar Purposes - Specification (Third Revision)

Please see remarks View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-6 (Rating)	-
Cl-7 (Classification)	-
Cl-8 (Marking)	-
Cl-9 (Checking of dimensions)	-
Cl-10.1, 10.2 (Prevention of Access to Live Parts)	-
Cl-10.3 (Requirements for Accessible Metal Parts)	-
Cl-10.4 (Requirements for Insulation of the Mechanism)	-
Cl. 10.5 (Requirements for Insulation of the Mechanism with Respect to the Surrounding Environment)	-
Cl-10.6 (Requirements for Switches Operated Indirectly)	-
Cl-10.7 (Requirements for Switches with Replaceable Pull Cord)	-
Cl-11 (Provision for earthing)	-
Cl-12 (Terminals)	-
Cl-13 (Constructional requirements)	-
Cl-14 (Mechanism)	-
Cl-15.1 (Resistance to Ageing)	-
Cl-15.2 (Protection Provided by Enclosures of Switches)	-
Cl-15.3 (Resistance to Humidity)	-
Cl-16.1 (General)	-
Cl-16.2 (Test for Measuring the Insulation Resistance)	-
Cl-16.3 (Electric Strength Test)	-
Cl-17 (Temperature rise)	-
Cl-18 (Making and breaking capacity)	-
Cl-20 (Mechanical strength)	-
Cl-21 (Resistance to heat)	-
Cl-22 (Screws, current carrying parts and connections)	-
Cl-23 (Creepage distances, clearances and distance through sealing compound)	-
Cl-24.1 (Resistance to abnormal heat and fire)	-
Cl-24.2 (Resistance to tracking)	-
Cl-25 (Resistance to rusting)	-
19.1 (Test for Switches Intended for Inductive Loads)	-
13.5 (Attachment of knobs)	-
12.3.11(Table 11) (Test Current for the Verification of Electrical and Thermal Stresses in Normal Use of Screwless Terminals)	-
12.3.12(Table 13) (Deflection Test Forces)	-
12.3.11(Table 11) (Test Current for the Verification of Electrical and Thermal Stresses in Normal Use of Screwless Terminals)	-

-
-

8422

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 10773 (1995)

Wrought copper tubes for refrigeration and air - Conditioning purposes - Specification (First Revision)

Copper tubes

19000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Freedom from defect)	-	100	For Hydrogen Embrittlement Test 5000/- Extra charges.
8(Dimension and Tolerance)	-	1800	For Hydrogen Embrittlement Test 5000/- Extra charges.
9.1 - 1(Copper)	-	700	For Hydrogen Embrittlement Test 5000/- Extra charges.
9.1 - 1(Arsenic)	-	700	For Hydrogen Embrittlement Test 5000/- Extra charges.
9.1 - 1(Iron)	-	700	For Hydrogen Embrittlement Test 5000/- Extra charges.
9.1 - 1(Lead)	-	700	For Hydrogen Embrittlement Test 5000/- Extra charges.
9.1 - 1(Nickel)	-	700	For Hydrogen Embrittlement Test 5000/- Extra charges.
9.1 - 1(Tin)	-	700	For Hydrogen Embrittlement Test 5000/- Extra charges.
9.1 - 1(Phosphorus)	-	700	For Hydrogen Embrittlement Test 5000/- Extra charges.
9.1 - 1(Total impurities)	-	700	For Hydrogen Embrittlement Test 5000/- Extra charges.
9.1 - 1(Manganese)	-	100	For Hydrogen Embrittlement Test 5000/- Extra charges.
9.1 - 1(Aluminium)	-	100	For Hydrogen Embrittlement Test 5000/- Extra charges.
9.1 - 1(Zinc)	-	100	For Hydrogen Embrittlement Test 5000/- Extra charges.
10.1.1 - 2(Tensile Test)	-	3000	For Hydrogen Embrittlement Test 5000/- Extra charges.
10.1.1 - 2(0.2 Proof stress)	-	2300	For Hydrogen Embrittlement Test 5000/- Extra charges.
10.1.1 - 2(Percentage elongation on 50mm gauge length)	-	500	For Hydrogen Embrittlement Test 5000/- Extra charges.
10.2(Flattening Test)	-	2000	For Hydrogen Embrittlement Test 5000/- Extra charges.
10.3(Drift Expanding Test)	-	2000	For Hydrogen Embrittlement Test 5000/- Extra charges.
10.4.2(Hydrostatic Test)	-	200	For Hydrogen Embrittlement Test 5000/- Extra charges.
10.4.3(Pneumatic Test)	-	200	For Hydrogen Embrittlement Test 5000/- Extra charges.
10.4.1(Eddy Current Test)	-	200	For Hydrogen Embrittlement Test 5000/- Extra charges.
10.5(Microscopic Examination)	-	200	For Hydrogen Embrittlement Test 5000/- Extra charges.
10.6(Hydrogen Embrittlement Test)	-	5000	For Hydrogen Embrittlement Test 5000/- Extra charges.
11.1(Residue Test Or cleanliness test)	-	1400	For Hydrogen Embrittlement Test 5000/- Extra charges.

31 Dec, 2026

-
-

8423

BIS, Central Laboratory (CL)

None

IS 12866 (2021)

Plastic Translucent Sheets made from Thermo-Setting Polyester Resin Glassfibre Reinforced - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.3 (Water absorption)	-
4 (PROFILES, DIMENSIONS AND TOLERANCES)	-
5 (WORKMANSHIP AND FINISH)	-

-
-

8424

DELHI TEST HOUSE, Azadhpur

8131406

IS 1865 (1991)

Iron castings with spheroidal or nodular graphite - Specification (Third Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.1(Tensile Strength)	-	2500	TESTING CHARGES ;- RS.15000/-
12.2(Impact Test)	-	1500	TESTING CHARGES ;- RS.15000/-
13.1(Tensile Test)	-	2500	TESTING CHARGES ;- RS.15000/-
17(Marking)	-	500	TESTING CHARGES ;- RS.15000/-
13.2(Hardness Test)	-	1000	TESTING CHARGES ;- RS.15000/-
13.3(Impact Test)	-	1500	TESTING CHARGES ;- RS.15000/-
5(Manufacture)	-	5500	TESTING CHARGES ;- RS.15000/-

17 Jun, 2027

-
Included w.e.f.22.07.2025

8425

International Testing Centre, MSME Technology Development Centre, Meerut

8177804

IS 17043 : Part 1 (2024)

Shoes - Specification Part 1 Shoes for Services

38000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.2(Design)	-	300	-
Cl-4.3.1(Size)	-	300	-
Cl-4.3.2(Weight)	-	300	-
Cl-4.4(Height of Upper)	-	300	-
Cl-4.5, S.Cl-4.5.2(Ergonomic Feature)	-	500	-
Cl-4.5, S.Cl-4.5.3(Bond Strength)	-	500	-
Cl-4.5, S.Cl-4.5.4(Slip Resistance)	-	1500	-
Cl-4.5.5.1(Electrical Properties-Antistatic footwear)	-	800	-
Cl-4.5, S.Cl-4.5.6(Heat Insulation of Sole Complex)	-	500	-
Cl-4.5, S.Cl-4.5.7(Cold Insulation of Sole Complex)	-	1000	-
Cl-4.6.1(Material)	-	1500	-
Cl-4.6.2(Tear Strength)	-	500	-
Cl-4.6.3(Water Vapour Permeability and Coefficient)	-	1000	-
Cl-4.6.4(Water Penetration and Water Absorption)	-	1000	-
Cl-4.7.1(Material)	-	500	-
Cl-4.7.2(Tear Strength)	-	500	-
Cl-4.7.3(Abrasion Resistance)	-	1000	-
Cl-4.7.4(Water Vapour Permeability and Coefficient)	-	1000	-
Cl. 4.8.1(Material)	-	500	-
Cl-4.8.2(Abrasion Resistance)	-	500	-
Cl-4.8.3(Water Absorption and Desorption)	-	1000	-
Cl-4.9.3(Abrasion Resistance)	-	1000	-
Cl-4.10(Toe Puff and Counter Stiffener)	-	800	-
Cl-4.11.1(Material)	-	500	-
Cl-4.11.2(Tear Strength)	-	500	-
Cl-4.12(Closing Thread)	-	500	-
Cl-4.13.2(Thickness)	-	300	-
Cl-4.13.3(Moulded Density)	-	300	-
Cl-4.13.4(Hardness)	-	500	-
Cl-4.13.5(Ageing Test)	-	1500	-
Cl-4.13.6(Tear Strength)	-	500	-
Cl-4.13.7(Abrasion Resistance)	-	500	-
Cl-4.13.8(Flexing Resistance)	-	1000	-
Cl-4.14(Eyelet)	-	500	-
Cl-4.15.2(Breaking Load and Tag Retention)	-	1000	-
Cl-5(Chemical Requirements)	-	25000	-
Cl-7(Marking)	-	300	-
Cl.4.5.8(Energy Absorption of Seat Region)	-	1500	-
Cl- 4.5.3.1(Upper-outsole bond strength)	-	500	-
Cl.4.5.3.2(Interlayer bond strength)	-	500	-
Cl-4.9.1(Material)	-	500	-
Cl-4.9.2(Water Absorption and Desorption)	-	1000	-
Cl-4.13.1(Material)	-	500	-
Cl-4.15.1(Material)	-	500	-
Cl-5, Table 1 of IS 17011 (i)(Allergenic and carcinogenic disperse dyes)	-	3000	-
Cl-5, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Cl-5, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Cl-5, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	800	-
Cl-5, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	2000	-
Cl-5, Table no 1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	1000	-
Cl-5, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	1000	-
Cl-5, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	3500	-
Cl-5, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	3000	-
Cl-5, Table no 1 of IS 17011 (x)(pH)	-	500	-
Cl-5, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	4500	-
Cl-5, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	2000	-
4.9 Insocks(Insock thickness)	-	300	-
Cl-4.2(Design)	-	300	-
Cl-4.3.1(Size)	-	300	-
Cl-4.3.2(Weight)	-	300	-
Cl-4.4(Height of Upper)	-	300	-
Cl-4.5, S.Cl-4.5.2(Ergonomic Feature)	-	500	-
Cl-4.5, S.Cl-4.5.3(Bond Strength)	-	500	-
Cl-4.5, S.Cl-4.5.4(Slip Resistance)	-	1500	-
Cl-4.5.5.1(Electrical Properties-Antistatic footwear)	-	800	-
Cl-4.5, S.Cl-4.5.6(Heat Insulation of Sole Complex)	-	500	-
Cl-4.5, S.Cl-4.5.7(Cold Insulation of Sole Complex)	-	500	-
Cl-4.6.1(Material)	-	500	-
Cl-4.6.2(Tear Strength)	-	500	-
Cl-4.6.3(Water Vapour Permeability and Coefficient)	-	1000	-
Cl-4.6.4(Water Penetration and Water Absorption)	-	1000	-
Cl-4.7.1(Material)	-	500	-
Cl-4.7.2(Tear Strength)	-	500	-
Cl-4.7.3(Abrasion Resistance)	-	800	-
Cl-4.7.4(Water Vapour Permeability and Coefficient)	-	1000	-
Cl. 4.8.1(Material)	-	500	-
Cl-4.8.2(Abrasion Resistance)	-	800	-
Cl-4.8.3(Water Absorption and Desorption)	-	1000	-
Cl-4.9.3(Abrasion Resistance)	-	1000	-
Cl-4.10(Toe Puff and Counter Stiffener)	-	500	-
Cl-4.11.1(Material)	-	500	-
Cl-4.11.2(Tear Strength)	-	500	-
Cl-4.12(Closing Thread)	-	500	-
Cl-4.13.2(Thickness)	-	300	-
Cl-4.13.3(Moulded Density)	-	300	-
Cl-4.13.4(Hardness)	-	500	-
Cl-4.13.5(Ageing Test)	-	1500	-
Cl-4.13.6(Tear Strength)	-	500	-
Cl-4.13.7(Abrasion Resistance)	-	800	-
Cl-4.13.8(Flexing Resistance)	-	800	-
Cl-4.14(Eyelet)	-	500	-
Cl-4.15.2(Breaking Load and Tag Retention)	-	500	-
Cl-5(Chemical Requirements)	-	25000	-
Cl-7(Marking)	-	300	-
Cl.4.5.8(Energy Absorption of Seat Region)	-	1000	-
Cl- 4.5.3.1(Upper-outsole bond strength)	-	500	-
Cl.4.5.3.2(Interlayer bond strength)	-	500	-
Cl-4.9.1(Material)	-	500	-
Cl-4.9.2(Water Absorption and Desorption)	-	1000	-
Cl-4.13.1(Material)	-	500	-
Cl-4.15.1(Material)	-	500	-
Cl-5, Table 1 of IS 17011 (i)(Allergenic and carcinogenic disperse dyes)	-	3000	-
Cl-5, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Cl-5, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Cl-5, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	1000	-
Cl-5, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	2000	-
Cl-5, Table no 1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	1000	-
Cl-5, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	1000	-
Cl-5, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	4500	-
Cl-5, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	3500	-
Cl-5, Table no 1 of IS 17011 (x)(pH)	-	500	-
Cl-5, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	4500	-
Cl-5, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	2000	-
4.9 Insocks(Insock thickness)	-	300	-

15 Apr, 2027

-
Included w.e.f 19.09.2024

8426

FHHL PRIVATE LIMITED, PUNE

7124016

IS 13428 (2024)

PACKAGED NATURAL MINERAL WATER - SPECIFICATION Third Revision

15200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.1(Escherichia coli)	-	200	-
6.1.2(Coliform)	-	200	-
6.1.3(Faecal Streptococci)	-	200	-
6.1.4(Sulphite Reducing Anaerobe)	-	200	-
6.1.5(Pseudomonas aeruginosa)	-	200	-
6.1.6(Yeast and moould)	-	200	-
6.1.7(Salmonella)	-	200	-
6.1.8(Vibrio Cholera)	-	200	-
6.2/Table 1/i(Colour)	-	100	-
6.2/Table 1/ii(Odour)	-	100	-
6.2/Table 1/iii(Taste)	-	100	-
6.2/Table 1/iv(Turbidity)	-	100	-
6.2/Table 1/v(Total Dissoved)	-	200	-
6.2/Table 1/vi(pH Value)	-	100	-
6.2/Table 2/i(Nitrate)	-	200	-
6.2/Table 2/ii(Nitrite)	-	200	-
6.2/Table 2/iii(Sulphide)	-	200	-
6.2/Table 2/iv(Manganese)	-	300	-
6.2/Table 2/v(Copper)	-	300	-
6.2/Table 2/vi(Fluoride)	-	300	-
6.2/Table 2/vii(Barium)	-	300	-
6.2/Table 2/viii(Antimony)	-	300	-
6.2/Table 2/ix(Borate)	-	300	-
6.2/Table 2/x(Silver)	-	300	-
6.2/Table 2/xi(Chloride)	-	200	-
6.2/Table 2/xii(Sulphate)	-	200	-
6.2/Table 2/xiii(Magnesium)	-	200	-
6.2/Table 2/xiv(Calcium)	-	200	-
6.2/Table 2/xv(Sodium)	-	300	-
6.2/Table 2/xvi(Alkalinity)	-	200	-
6.2/Table 2/xvii(Selenium)	-	300	-
6.2/Table 2/xviii(Mineral Oil)	-	300	-
6.2/Table 2/xix(Phenolic Compounds)	-	200	-
6.2/Table 2/xx(Anionic Surface active agents)	-	200	-
6.2/Table 3/i(Arsenic)	-	300	-
6.2/Table 3/ii(Cadmium)	-	300	-
6.2/Table 3/iii(Cyanide)	-	300	-
6.2/Table 3/iv(Chromium)	-	300	-
6.2/Table 3/v(Mercury)	-	300	-
6.2/Table 3/vi(Lead)	-	300	-
6.2/Table 3/vii(Nickel)	-	300	-
6.2/Table 3/viii(Polychlorinated biphenyle (PCB))	-	300	-
6.2/Table 3/ix(Polynuclear aromatic hydrocarbons)	-	300	-
6.2/Table 3/x(Uranium)	-	1700	-
Cl- 6.3, Annex N (i)(P,P -DDE)	-	100	-
Cl- 6.3, Annex N (i)(O,P -DDE)	-	100	-
Cl- 6.3, Annex N (i)(P,P- DDT)	-	100	-
Cl- 6.3, Annex N (i)(O,P -DDT)	-	100	-
Cl-6.3, Annex N (i)(P,P- DDD)	-	100	-
Cl-6.3, Annex N (i)(O,P-DDD)	-	100	-
Cl- 6.3, Annex N (ii)(γ-HCH (lindane))	-	100	-
Cl- 6.3, Annex N (iii)(α-HCH)	-	100	-
Cl- 6.3, Annex N (iii)(β-HCH)	-	100	-
Cl- 6.3, Annex N (iii)(δ - HCH)	-	100	-
Cl- 6.3, Annex N (iv)(Endosulfan - α)	-	100	-
Cl- 6.3, Annex N (iv)(Endosulfan - β)	-	100	-
Cl- 6.3, Annex N (iv)(Endosulfan - sulphate)	-	100	-
Cl- 6.3, Annex N (v)(Monocrotophos)	-	100	-
Cl- 6.3, Annex N (vi)(Ethion)	-	100	-
Cl- 6.3, Annex N (vii)(Chlorpyrifos)	-	100	-
Cl- 6.3, Annex N (viii)(Phorate and its oxygen analogue)	-	100	-
Cl- 6.3, Annex N (viii)(phorate sulphoxide)	-	50	-
Cl- 6.3, Annex N (viii)(phorate sulphone)	-	50	-
Cl- 6.3, Annex N (ix)(2,4-D)	-	150	-
Cl- 6.3, Annex N (x)(Butachlor)	-	100	-
Cl- 6.3, Annex N (xi)(Isoproturon)	-	150	-
Cl- 6.3, Annex N (xii)(Alachlor)	-	100	-
Cl- 6.3, Annex N (xiii)(Atrazine)	-	100	-
Cl- 6.3, Annex N (xiv)(Methyl parathion)	-	100	-
Cl- 6.3, Annex N (xiv)(Methyl paraoxon)	-	100	-
Cl- 6.3, Annex N (xv)(Malathion)	-	50	-
Cl- 6.3, Annex N (xv)(malaoxon)	-	50	-
Cl- 6.3, Annex N (xvi)(Aldrin)	-	100	-
6.2/Table 4/i(Alpha emitters, Bq/l, Max)	-	0	-
6.2/Table 4/ii(Beta emitters, Bq/l, Max)	-	0	-
Cl-6.1.3(Staphylococcus aureus)	-	200	-
Cl-6.1.7(Shigella)	-	200	-
Cl-6.1.8(V. parahaemolyticus)	-	200	-
Cl-6.3, Annex N (XVI)(Dieldrin)	-	100	-
6.1.1(Escherichia coli)	-	0	-
6.1.2(Coliform)	-	0	-
6.1.3(Faecal Streptococci)	-	0	-
6.1.4(Sulphite Reducing Anaerobe)	-	0	-
6.1.5(Pseudomonas aeruginosa)	-	0	-
6.1.6(Yeast and moould)	-	0	-
6.1.7(Salmonella)	-	0	-
6.1.8(Vibrio Cholera)	-	0	-
6.2/Table 1/i(Colour)	-	0	-
6.2/Table 1/ii(Odour)	-	0	-
6.2/Table 1/iii(Taste)	-	0	-
6.2/Table 1/iv(Turbidity)	-	0	-
6.2/Table 1/v(Total Dissoved)	-	0	-
6.2/Table 1/vi(pH Value)	-	0	-
6.2/Table 2/i(Nitrate)	-	0	-
6.2/Table 2/ii(Nitrite)	-	0	-
6.2/Table 2/iii(Sulphide)	-	0	-
6.2/Table 2/iv(Manganese)	-	0	-
6.2/Table 2/v(Copper)	-	0	-
6.2/Table 2/vi(Fluoride)	-	0	-
6.2/Table 2/vii(Barium)	-	0	-
6.2/Table 2/viii(Antimony)	-	0	-
6.2/Table 2/ix(Borate)	-	0	-
6.2/Table 2/x(Silver)	-	0	-
6.2/Table 2/xi(Chloride)	-	0	-
6.2/Table 2/xii(Sulphate)	-	0	-
6.2/Table 2/xiii(Magnesium)	-	0	-
6.2/Table 2/xiv(Calcium)	-	0	-
6.2/Table 2/xv(Sodium)	-	0	-
6.2/Table 2/xvi(Alkalinity)	-	0	-
6.2/Table 2/xvii(Selenium)	-	0	-
6.2/Table 2/xviii(Mineral Oil)	-	0	-
6.2/Table 2/xix(Phenolic Compounds)	-	0	-
6.2/Table 2/xx(Anionic Surface active agents)	-	0	-
6.2/Table 3/i(Arsenic)	-	0	-
6.2/Table 3/ii(Cadmium)	-	0	-
6.2/Table 3/iii(Cyanide)	-	0	-
6.2/Table 3/iv(Chromium)	-	0	-
6.2/Table 3/v(Mercury)	-	0	-
6.2/Table 3/vi(Lead)	-	0	-
6.2/Table 3/vii(Nickel)	-	0	-
6.2/Table 3/viii(Polychlorinated biphenyle (PCB))	-	0	-
6.2/Table 3/ix(Polynuclear aromatic hydrocarbons)	-	0	-
6.2/Table 3/x(Uranium)	-	0	-
Cl- 6.3, Annex N (i)(P,P -DDE)	-	0	-
Cl- 6.3, Annex N (i)(O,P -DDE)	-	0	-
Cl- 6.3, Annex N (i)(P,P- DDT)	-	0	-
Cl- 6.3, Annex N (i)(O,P -DDT)	-	0	-
Cl-6.3, Annex N (i)(P,P- DDD)	-	0	-
Cl-6.3, Annex N (i)(O,P-DDD)	-	0	-
Cl- 6.3, Annex N (ii)(γ-HCH (lindane))	-	0	-
Cl- 6.3, Annex N (iii)(α-HCH)	-	0	-
Cl- 6.3, Annex N (iii)(β-HCH)	-	0	-
Cl- 6.3, Annex N (iii)(δ - HCH)	-	0	-
Cl- 6.3, Annex N (iv)(Endosulfan - α)	-	0	-
Cl- 6.3, Annex N (iv)(Endosulfan - β)	-	0	-
Cl- 6.3, Annex N (iv)(Endosulfan - sulphate)	-	0	-
Cl- 6.3, Annex N (v)(Monocrotophos)	-	0	-
Cl- 6.3, Annex N (vi)(Ethion)	-	0	-
Cl- 6.3, Annex N (vii)(Chlorpyrifos)	-	0	-
Cl- 6.3, Annex N (viii)(Phorate and its oxygen analogue)	-	0	-
Cl- 6.3, Annex N (viii)(phorate sulphoxide)	-	0	-
Cl- 6.3, Annex N (viii)(phorate sulphone)	-	0	-
Cl- 6.3, Annex N (ix)(2,4-D)	-	0	-
Cl- 6.3, Annex N (x)(Butachlor)	-	0	-
Cl- 6.3, Annex N (xi)(Isoproturon)	-	0	-
Cl- 6.3, Annex N (xii)(Alachlor)	-	0	-
Cl- 6.3, Annex N (xiii)(Atrazine)	-	0	-
Cl- 6.3, Annex N (xiv)(Methyl parathion)	-	0	-
Cl- 6.3, Annex N (xiv)(Methyl paraoxon)	-	0	-
Cl- 6.3, Annex N (xv)(Malathion)	-	0	-
Cl- 6.3, Annex N (xv)(malaoxon)	-	0	-
Cl- 6.3, Annex N (xvi)(Aldrin)	-	0	-
6.2/Table 4/i(Alpha emitters, Bq/l, Max)	-	0	-
6.2/Table 4/ii(Beta emitters, Bq/l, Max)	-	0	-
Cl-6.1.3(Staphylococcus aureus)	-	0	-
Cl-6.1.7(Shigella)	-	0	-
Cl-6.1.8(V. parahaemolyticus)	-	0	-
Cl-6.3, Annex N (XVI)(Dieldrin)	-	0	-
6.1.1(Escherichia coli)	-	0	-
6.1.2(Coliform)	-	0	-
6.1.3(Faecal Streptococci)	-	0	-
6.1.4(Sulphite Reducing Anaerobe)	-	0	-
6.1.5(Pseudomonas aeruginosa)	-	0	-
6.1.6(Yeast and moould)	-	0	-
6.1.7(Salmonella)	-	0	-
6.1.8(Vibrio Cholera)	-	0	-
6.2/Table 1/i(Colour)	-	0	-
6.2/Table 1/ii(Odour)	-	0	-
6.2/Table 1/iii(Taste)	-	0	-
6.2/Table 1/iv(Turbidity)	-	0	-
6.2/Table 1/v(Total Dissoved)	-	0	-
6.2/Table 1/vi(pH Value)	-	0	-
6.2/Table 2/i(Nitrate)	-	0	-
6.2/Table 2/ii(Nitrite)	-	0	-
6.2/Table 2/iii(Sulphide)	-	0	-
6.2/Table 2/iv(Manganese)	-	0	-
6.2/Table 2/v(Copper)	-	0	-
6.2/Table 2/vi(Fluoride)	-	0	-
6.2/Table 2/vii(Barium)	-	0	-
6.2/Table 2/viii(Antimony)	-	0	-
6.2/Table 2/ix(Borate)	-	0	-
6.2/Table 2/x(Silver)	-	0	-
6.2/Table 2/xi(Chloride)	-	0	-
6.2/Table 2/xii(Sulphate)	-	0	-
6.2/Table 2/xiii(Magnesium)	-	0	-
6.2/Table 2/xiv(Calcium)	-	0	-
6.2/Table 2/xv(Sodium)	-	0	-
6.2/Table 2/xvi(Alkalinity)	-	0	-
6.2/Table 2/xvii(Selenium)	-	0	-
6.2/Table 2/xviii(Mineral Oil)	-	0	-
6.2/Table 2/xix(Phenolic Compounds)	-	0	-
6.2/Table 2/xx(Anionic Surface active agents)	-	0	-
6.2/Table 3/i(Arsenic)	-	0	-
6.2/Table 3/ii(Cadmium)	-	0	-
6.2/Table 3/iii(Cyanide)	-	0	-
6.2/Table 3/iv(Chromium)	-	0	-
6.2/Table 3/v(Mercury)	-	0	-
6.2/Table 3/vi(Lead)	-	0	-
6.2/Table 3/vii(Nickel)	-	0	-
6.2/Table 3/viii(Polychlorinated biphenyle (PCB))	-	0	-
6.2/Table 3/ix(Polynuclear aromatic hydrocarbons)	-	0	-
6.2/Table 3/x(Uranium)	-	0	-
Cl- 6.3, Annex N (i)(P,P -DDE)	-	0	-
Cl- 6.3, Annex N (i)(O,P -DDE)	-	0	-
Cl- 6.3, Annex N (i)(P,P- DDT)	-	0	-
Cl- 6.3, Annex N (i)(O,P -DDT)	-	0	-
Cl-6.3, Annex N (i)(P,P- DDD)	-	0	-
Cl-6.3, Annex N (i)(O,P-DDD)	-	0	-
Cl- 6.3, Annex N (ii)(γ-HCH (lindane))	-	0	-
Cl- 6.3, Annex N (iii)(α-HCH)	-	0	-
Cl- 6.3, Annex N (iii)(β-HCH)	-	0	-
Cl- 6.3, Annex N (iii)(δ - HCH)	-	0	-
Cl- 6.3, Annex N (iv)(Endosulfan - α)	-	0	-
Cl- 6.3, Annex N (iv)(Endosulfan - β)	-	0	-
Cl- 6.3, Annex N (iv)(Endosulfan - sulphate)	-	0	-
Cl- 6.3, Annex N (v)(Monocrotophos)	-	0	-
Cl- 6.3, Annex N (vi)(Ethion)	-	0	-
Cl- 6.3, Annex N (vii)(Chlorpyrifos)	-	0	-
Cl- 6.3, Annex N (viii)(Phorate and its oxygen analogue)	-	0	-
Cl- 6.3, Annex N (viii)(phorate sulphoxide)	-	0	-
Cl- 6.3, Annex N (viii)(phorate sulphone)	-	0	-
Cl- 6.3, Annex N (ix)(2,4-D)	-	0	-
Cl- 6.3, Annex N (x)(Butachlor)	-	0	-
Cl- 6.3, Annex N (xi)(Isoproturon)	-	0	-
Cl- 6.3, Annex N (xii)(Alachlor)	-	0	-
Cl- 6.3, Annex N (xiii)(Atrazine)	-	0	-
Cl- 6.3, Annex N (xiv)(Methyl parathion)	-	0	-
Cl- 6.3, Annex N (xiv)(Methyl paraoxon)	-	0	-
Cl- 6.3, Annex N (xv)(Malathion)	-	0	-
Cl- 6.3, Annex N (xv)(malaoxon)	-	0	-
Cl- 6.3, Annex N (xvi)(Aldrin)	-	0	-
6.2/Table 4/i(Alpha emitters, Bq/l, Max)	-	0	-
6.2/Table 4/ii(Beta emitters, Bq/l, Max)	-	0	-
Cl-6.1.3(Staphylococcus aureus)	-	0	-
Cl-6.1.7(Shigella)	-	0	-
Cl-6.1.8(V. parahaemolyticus)	-	0	-
Cl-6.3, Annex N (XVI)(Dieldrin)	-	0	-
6.1.1(Escherichia coli)	-	0	-
6.1.2(Coliform)	-	0	-
6.1.3(Faecal Streptococci)	-	0	-
6.1.4(Sulphite Reducing Anaerobe)	-	0	-
6.1.5(Pseudomonas aeruginosa)	-	0	-
6.1.6(Yeast and moould)	-	0	-
6.1.7(Salmonella)	-	0	-
6.1.8(Vibrio Cholera)	-	0	-
6.2/Table 1/i(Colour)	-	0	-
6.2/Table 1/ii(Odour)	-	0	-
6.2/Table 1/iii(Taste)	-	0	-
6.2/Table 1/iv(Turbidity)	-	0	-
6.2/Table 1/v(Total Dissoved)	-	0	-
6.2/Table 1/vi(pH Value)	-	0	-
6.2/Table 2/i(Nitrate)	-	0	-
6.2/Table 2/ii(Nitrite)	-	0	-
6.2/Table 2/iii(Sulphide)	-	0	-
6.2/Table 2/iv(Manganese)	-	0	-
6.2/Table 2/v(Copper)	-	0	-
6.2/Table 2/vi(Fluoride)	-	0	-
6.2/Table 2/vii(Barium)	-	0	-
6.2/Table 2/viii(Antimony)	-	0	-
6.2/Table 2/ix(Borate)	-	0	-
6.2/Table 2/x(Silver)	-	0	-
6.2/Table 2/xi(Chloride)	-	0	-
6.2/Table 2/xii(Sulphate)	-	0	-
6.2/Table 2/xiii(Magnesium)	-	0	-
6.2/Table 2/xiv(Calcium)	-	0	-
6.2/Table 2/xv(Sodium)	-	0	-
6.2/Table 2/xvi(Alkalinity)	-	0	-
6.2/Table 2/xvii(Selenium)	-	0	-
6.2/Table 2/xviii(Mineral Oil)	-	0	-
6.2/Table 2/xix(Phenolic Compounds)	-	0	-
6.2/Table 2/xx(Anionic Surface active agents)	-	0	-
6.2/Table 3/i(Arsenic)	-	0	-
6.2/Table 3/ii(Cadmium)	-	0	-
6.2/Table 3/iii(Cyanide)	-	0	-
6.2/Table 3/iv(Chromium)	-	0	-
6.2/Table 3/v(Mercury)	-	0	-
6.2/Table 3/vi(Lead)	-	0	-
6.2/Table 3/vii(Nickel)	-	0	-
6.2/Table 3/viii(Polychlorinated biphenyle (PCB))	-	0	-
6.2/Table 3/ix(Polynuclear aromatic hydrocarbons)	-	0	-
6.2/Table 3/x(Uranium)	-	0	-
Cl- 6.3, Annex N (i)(P,P -DDE)	-	0	-
Cl- 6.3, Annex N (i)(O,P -DDE)	-	0	-
Cl- 6.3, Annex N (i)(P,P- DDT)	-	0	-
Cl- 6.3, Annex N (i)(O,P -DDT)	-	0	-
Cl-6.3, Annex N (i)(P,P- DDD)	-	0	-
Cl-6.3, Annex N (i)(O,P-DDD)	-	0	-
Cl- 6.3, Annex N (ii)(γ-HCH (lindane))	-	0	-
Cl- 6.3, Annex N (iii)(α-HCH)	-	0	-
Cl- 6.3, Annex N (iii)(β-HCH)	-	0	-
Cl- 6.3, Annex N (iii)(δ - HCH)	-	0	-
Cl- 6.3, Annex N (iv)(Endosulfan - α)	-	0	-
Cl- 6.3, Annex N (iv)(Endosulfan - β)	-	0	-
Cl- 6.3, Annex N (iv)(Endosulfan - sulphate)	-	0	-
Cl- 6.3, Annex N (v)(Monocrotophos)	-	0	-
Cl- 6.3, Annex N (vi)(Ethion)	-	0	-
Cl- 6.3, Annex N (vii)(Chlorpyrifos)	-	0	-
Cl- 6.3, Annex N (viii)(Phorate and its oxygen analogue)	-	0	-
Cl- 6.3, Annex N (viii)(phorate sulphoxide)	-	0	-
Cl- 6.3, Annex N (viii)(phorate sulphone)	-	0	-
Cl- 6.3, Annex N (ix)(2,4-D)	-	0	-
Cl- 6.3, Annex N (x)(Butachlor)	-	0	-
Cl- 6.3, Annex N (xi)(Isoproturon)	-	0	-
Cl- 6.3, Annex N (xii)(Alachlor)	-	0	-
Cl- 6.3, Annex N (xiii)(Atrazine)	-	0	-
Cl- 6.3, Annex N (xiv)(Methyl parathion)	-	0	-
Cl- 6.3, Annex N (xiv)(Methyl paraoxon)	-	0	-
Cl- 6.3, Annex N (xv)(Malathion)	-	0	-
Cl- 6.3, Annex N (xv)(malaoxon)	-	0	-
Cl- 6.3, Annex N (xvi)(Aldrin)	-	0	-
6.2/Table 4/i(Alpha emitters, Bq/l, Max)	-	0	-
6.2/Table 4/ii(Beta emitters, Bq/l, Max)	-	0	-
Cl-6.1.3(Staphylococcus aureus)	-	0	-
Cl-6.1.7(Shigella)	-	0	-
Cl-6.1.8(V. parahaemolyticus)	-	0	-
Cl-6.3, Annex N (XVI)(Dieldrin)	-	0	-

31 Dec, 2026

-
Included w.e.f. 26.09.2024 Exclusion: Cl.6.2 Table-4 (i) Alpha Emitters, Cl.6.2 Table-4 (ii) Beta Emitters

8427

Bharat Test House Pvt Ltd 781 Sonipat Haryana

9137826

IS 302 : Part 2 : Sec 46 (1993)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 46 electric steam cookers

Electric Steam Cookers

27500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General)	-	0	-
5(Rating)	-	100	-
6(Classification)	-	100	-
7(Marking)	-	100	-
8("8 PROTECTION AGAINST ELECTRIC SHOCK ")	-	500	-
9("STARTING OF MOTOR-OPERATING APPLIANCES ")	-	0	-
10(INPUT AND CURRENT)	-	1000	-
11(TEMPERATURE RISE)	-	1500	-
12("OPERATION UNDER OVERLOAD CONDITIONS OF APPLIANCES WITH HEATING ELEMENTS")	-	1000	-
13(" ELECTRICAL INSULATION AND LEKAGE CURRENT AT OPERATING TEMPERATURE ")	-	800	-
14("RADIO AND TELEVISION INTERFERENCE SUPPRESSION")	-	2000	-
15(MOISTURE RESISTANCE)	-	4000	-
16("INSULATION RESlSTANCE AND specified in 16.2. ELECTRIC SHOCK STRENGTH ( AFTER HUMIDITY TREATMENT )")	-	800	-
17(OVERLOAD PROTECTION)	-	1500	-
19(ABNORMAL OPERATION)	-	2000	-
20("STABILITY AND MECHANICAL HAZARDS")	-	500	-
21(MECHANICAL STRENGTH)	-	1000	-
21(MECHANICAL STRENGTH)	-	1000	-
22(CONSTRUCTION)	-	2000	-
22(CONSTRUCTION)	-	2000	-
23(INTERNAL WIRING)	-	500	-
24(COMPONENTS)	-	0	-
25("SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS ")	-	1000	-
26("TERMINALS FOR EXTERNAL CONDUCTORS")	-	500	-
27(PROVISION FOR EARTHING)	-	1000	-
28(SCREWS AND CONNECTIONS)	-	600	-
30("RESISTANCE TO HEAT, FIRE AND TRACKING ")	-	2000	-
31(RESISTANCE TO RUSTING)	-	1000	-
31(RESISTANCE TO RUSTING)	-	1000	-
32(RADIATION HAZARDS)	-	500	-
4(General)	-	0	-
5(Rating)	-	0	-
6(Classification)	-	0	-
7(Marking)	-	0	-
8("8 PROTECTION AGAINST ELECTRIC SHOCK ")	-	0	-
9("STARTING OF MOTOR-OPERATING APPLIANCES ")	-	0	-
10(INPUT AND CURRENT)	-	0	-
11(TEMPERATURE RISE)	-	0	-
12("OPERATION UNDER OVERLOAD CONDITIONS OF APPLIANCES WITH HEATING ELEMENTS")	-	0	-
13(" ELECTRICAL INSULATION AND LEKAGE CURRENT AT OPERATING TEMPERATURE ")	-	0	-
14("RADIO AND TELEVISION INTERFERENCE SUPPRESSION")	-	0	-
15(MOISTURE RESISTANCE)	-	0	-
16("INSULATION RESlSTANCE AND specified in 16.2. ELECTRIC SHOCK STRENGTH ( AFTER HUMIDITY TREATMENT )")	-	0	-
17(OVERLOAD PROTECTION)	-	0	-
19(ABNORMAL OPERATION)	-	0	-
20("STABILITY AND MECHANICAL HAZARDS")	-	0	-
21(MECHANICAL STRENGTH)	-	0	-
21(MECHANICAL STRENGTH)	-	0	-
22(CONSTRUCTION)	-	0	-
22(CONSTRUCTION)	-	0	-
23(INTERNAL WIRING)	-	0	-
24(COMPONENTS)	-	0	-
25("SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS ")	-	0	-
26("TERMINALS FOR EXTERNAL CONDUCTORS")	-	0	-
27(PROVISION FOR EARTHING)	-	0	-
28(SCREWS AND CONNECTIONS)	-	0	-
30("RESISTANCE TO HEAT, FIRE AND TRACKING ")	-	0	-
31(RESISTANCE TO RUSTING)	-	0	-
31(RESISTANCE TO RUSTING)	-	0	-
32(RADIATION HAZARDS)	-	0	-
20("STABILITY AND MECHANICAL HAZARDS")	-	0	-
21(MECHANICAL STRENGTH)	-	0	-
22(CONSTRUCTION)	-	0	-
23(INTERNAL WIRING)	-	0	-
24(COMPONENTS)	-	0	-
25("SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS ")	-	0	-
26("TERMINALS FOR EXTERNAL CONDUCTORS")	-	0	-
27(PROVISION FOR EARTHING)	-	0	-
28(SCREWS AND CONNECTIONS)	-	0	-
30("RESISTANCE TO HEAT, FIRE AND TRACKING ")	-	0	-
31(RESISTANCE TO RUSTING)	-	0	-
32(RADIATION HAZARDS)	-	0	-

31 Dec, 2026

-
Included.w.e.f.13.11.2024. Exclusion : 19.11.4.1 to 19.11.4.7 (EMI/EMC)

8428

BIS, Southern Regional Laboratory (SRL)

None

IS 7933 (2022)

Specification for Flexible Polyurethane Foam for Domestic Mattresses First Revision

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.8, Table 1, i) (Density,)	-
5.4 (Dimensions and Tolerances)	-

-
-

8429

BIS, Southern Regional Laboratory (SRL)

None

IS 3748 (2022)

Tool Steels - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
11.1 (Product diameter or thickness ≥ 15 mm)	-
7.2 (Chemical Composition)	-
7.2 (Carbon)	-
As per Clause 7.2, Table 2 to 9 (Silicon)	-
As per Clause 7.2, Table 2 to 9 (Manganese)	-
As per Clause 7.2, Table 2 to 9 (Chromium)	-
As per Clause 7.2, Table 2 to 9 (Sulphur)	-
As per Clause 7.2, Table 2 to 9 (phosphorus)	-
As per Clause 7.2, Table 2 to 9 (Cobalt)	-
As per Clause 7.2, Table 2 to 9 (Molybdenum)	-
As per Clause 7.2, Table 2 to 9 (vanadium)	-
As per Clause 7.2, Table 2 to 9 (Tunsten)	-
As per Clause 7.2, Table 2 to 9 (Nickel)	-
As per Clause 7.2, Table 2 to 9 (Nitrogen)	-

-
-

8430

TAG Corporation, Chennai

6138806

IS 398 : Part 6 (2021)

Aluminium Conductors For Overhead Transmission Purposes Part 6: High conductivity aluminium alloy stranded conductors

High conductivity aluminium alloy stranded conductors

286635 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
16.2(Visual Examination)	-	1200	test charges per sample of conductor
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	5200	Test charges per conductor inclusive of all layers
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	5200	Test charges per conductor inclusive of all layers
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	5200	Test charges per conductor inclusive of all layers
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	5200	Test charges per conductor inclusive of all layers
16.4, Table 2(Measurement of Diameter of Individual Aluminium Alloy Wires)	-	360	test charges per individual strand
16.5, Table 2(Breaking Load Test - before stranding)	-	360	test charges per individual strand
16.5, Table 2(Breaking Load Test - after stranding)	-	360	test charges per individual strand
16.6, Table 1(Elongation Test - before stranding)	-	690	test charges per individual strand
16.6, Table 1(Elongation Test - after stranding)	-	690	test charges per individual strand
16.7, Table 2(Resistivity Test)	-	920	test charges per individual strand
16.8(Wrapping Test)	-	575	test charges per individual strand
11(Stranding)	-	5200	Test charges per conductor inclusive of all layers
8(Freedom from defects)	-	1200	test charges per sample of conductor
16.9, Table 3(Ultimate Tensile Strength on Stranded Conductor)	-	28800	test charges per sample of conductor
16.10, Table 3(d.c. Resistance Test on Stranded Conductor)	-	9200	test charges per sample of conductor
16.11(Stress-strain Test)	-	44900	test charges per sample of conductor
16.2(Visual Examination)	-	-	-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	-	-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	-	-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	-	-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	-	-
16.4, Table 2(Measurement of Diameter of Individual Aluminium Alloy Wires)	-	-	-
16.5, Table 2(Breaking Load Test - before stranding)	-	-	-
16.5, Table 2(Breaking Load Test - after stranding)	-	-	-
16.6, Table 1(Elongation Test - before stranding)	-	-	-
16.6, Table 1(Elongation Test - after stranding)	-	-	-
16.7, Table 2(Resistivity Test)	-	-	-
16.8(Wrapping Test)	-	-	-
11(Stranding)	-	-	-
8(Freedom from defects)	-	-	-
16.9, Table 3(Ultimate Tensile Strength on Stranded Conductor)	-	-	-
16.10, Table 3(d.c. Resistance Test on Stranded Conductor)	-	-	-
16.11(Stress-strain Test)	-	-	-

10 Jan, 2027

-
Included w.e.f 03.01.2025

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number