BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

14027 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

8341

Delta Testing and Research Laboratories Private Limited (C5)

9179506

IS 432 : Part 1 (1982)

Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild Steel and Medium Tensile Steel Bars

All type of Grade/Type/Size/Designation

3500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.1(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6.2(Diameter & Ovality)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6.2(Weight)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8.2(Bend test)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9.3(Press)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 5.1(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6.1(Diameter)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6.2(Weight)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8.1(ultimate tensile stress, yield stress and percentage elongation)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9.3(Press)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 5.1(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6.2(Diameter & Ovality)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6.2(Weight)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8(Physical Requirements)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9.3(Press)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause -4, 4.3(TITANIUM)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause -4, 4.2(VANADIUM)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause -4, 4.1(NIOBIUM)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause -4, 4.1(Molybdenum)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause -4, 4.1(Chromium)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause -4, 4.1(Nickel)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause -4, 4.1( ALUMINIUM)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause -4, 4.1(SILICON)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause -4, 4.1(NITROGEN)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause -4, 4.1(MANGANESE)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause -4, 4.1(PHOSPHURS)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause -4, 4.1(SULPHUR)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause -4, 4.1( CARBON)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 8.1 Table 1(Elongation)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 8.1 Table 1(Yield Stress)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 8.1(Elongation)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 8.1(Yield Stress)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 9.3(Bend test)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 6.1(Size)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9.3(Press)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8(UTM)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6.2(Weight)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6.2(Diameter & Ovality)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 5.1(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7(Tolerance)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 5.1(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6.2(Diameter & Ovality)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6.2(Weight)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8(UTM)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9.3(Press)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 4.1(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 5 & 6(Diameter)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 7(UTM)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8.3(Bending To Both Side At 90°, Then Straight)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 5.1(IS 432 Part 1)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 6.2(IS 1732)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 8.1(IS 1608 Part 1)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4(Any Instrumental Method/Chemical Method)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4(By Calculation)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4(By Calculation)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4(Any Instrumental Method/Chemical Method)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 5.1(Freedom from Defect)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 6.2(Mass)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 8.1(Ultimate Tensile Stress)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4(Boron)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4(By Calculation)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4(By Calculation)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4(Copper)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1 & 9.2(Yield Strength - IS: 1608 (P1))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1 & 9.2(Elongation on SoA 5.65mm GL - IS: 1608 (P1))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 5.1(Freedom from Defect)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 6.2(Mass)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 8.1(Ultimate Tensile Stress)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4(Boron)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4(Carbon Equivalent)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4(Ni+V+Ti)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4(Copper)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4(Copper)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
-

8342

Delta Testing and Research Laboratories Private Limited (C5)

9179506

IS 14587 (2023)

Prelaminated Medium Density Fibre Board - Specification

All Grade / Type / Size / Designation

17000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Medium Density Fibre (MDF) Board)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-7(Finish)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-8.1(Dimensions of prelaminated MDF)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-8.2(Tolerances)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-8.2.1(Edge straightness)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-9.1 S.No-(1), i(Density, kg/m3)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-9.1 S.No-(1), ii(Variation from mean density, percent)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-9.1 S.No-(1), iii(Moisture content, percent)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-9.1 S.No-(1), iv(Variation from mean moisture content, percent (absolute))	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-9.1 S.No-(1), v(Linear expansion (thickness swelling in water), due to general absorption after 24 h soaking, percent, Max)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-9.1 S.No-(1), vi(Internal bond strength, N/mm2, Min)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-9.1 S.No-(1), vii,a(After cyclic test)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-9.1 S.No-(1), vii,b(After accelerated water resistance test)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-9.1 S.No-(1), viii(Modulus of rupture, N/mm2 , Min)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-9.1 S.No-(1), ix(Modulus of elasticity, N/mm2 , Min)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-9.1 S.No-(1), x,(Screw withdrawal strength, ????????, Min)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-9.1 S.No-(1), xi(Formaldehyde content (Fc), mg/100 g for oven dry board)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-9.1 S.No-(1), xii(Steady-state formaldehyde emission (Fc), mg/m3)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-9.1 S.No-(1), xiii(Abrasion resistance in number of revolutions, Min, (Type 1 to 4))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-9.1 S.No-(1), xiv(Resistance to steam/water vapours)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-9.1 S.No-(1), xv(Resistance to crack)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-9.1 S.No-(1), xvi(Resistance to a cigarette burn)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-9.1 S.No-(1), xvii(Resistance to stain)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-11.2(Specific Requirement)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-12(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
-

8343

Delta Testing and Research Laboratories Private Limited (C5)

9179506

IS 407 (1981)

Specification for brass tubes for general purposes (Third Revision)

All type of Grade/Type/Size/Designation

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4/4.1("MANUFACTURE-The tubes shall be solid drawn and supplied in straight lengths. Their ends shall be clean and square with the axis of the tube.")	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6/6.1(FREEDOM FROM DEFECTS)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7/7.1 & 7.1.1(CONDITION)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8/8.1 & 8.2(SIZES AND TOLERANCES-Mean Outside Dia)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8/8.1 & 8.2(SIZES AND TOLERANCES-Mean Wall thickness)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8/8.1 & 8.2(SIZES AND TOLERANCES-Length)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9/9.1/Appendix A(PRESSURE TESTS-Hydraulic Test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9/9.2(PRESSURE TESTS-Pneumatic Test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10/10.1-Table 2(PHYSICAL TEST- Hardness (HV)-IS : 1501 (Part 1))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10/10.2-Table 2(PHYSICAL TEST- Tensilt Test - IS : 2655)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10/10.3(PHYSICAL TEST- Drifting Test- (For tubes upto and Including 100 mm nom OD))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10/10.4 (10.4.1)("PHYSICAL TEST-Flattening Test (For Tubes ≤ 2.5 mm Wall Thickness and not Exceeding 100 mm Outside Diameter)")	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10/10.4 (10.4.2)(PHYSICAL TEST-Flattening Test (For Tubes ≥ 2.5 mm Wall Thickness and More Than 100 mm Outside Diameter))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10/10.5(PHYSICAL TEST- Double Bend TestDouble Bend Test ( For Round Tubes ≤ 2.5 mm Wall Thickness and Over 100 mm Outside Diameter ))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10/10.6(PHYSICAL TEST- Mercurous Nitrate Test- IS : 2305)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11/11.1(MARKING)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11/11.1.1(MARKING)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5(Chemical Composition - IS 3685)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
-

8344

Delta Testing and Research Laboratories Private Limited (C5)

9179506

IS 319 (2007)

Free cutting brass bars, rods and section - Specification (Fifth Revision)

All type of Grade/Type/Size/Designation

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Freedom from defects)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.0(Dimension and Tolerances)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1 Table 1(Cu)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1 Table 1(Pb)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1 Table 1(Fe)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1 Table 1(Total other impurities excluding iron)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1 Table 1(Zn)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1 Table-2(Tensile Strength)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1 Table-2(Elongation)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2(Vickers Hardness)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10.1(Mercurous Nitrate Test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
14(Marking)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
-

8345

Delta Testing and Research Laboratories Private Limited (C5)

9179506

IS 318 (1981)

Specification for leaded tin bronze ingots and castings (Second Revision)

All type of Grade/type/Size/Designation

4500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(SIZE AND SHAPE)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6(FREEDOM FROM DEFECTS)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4, Table 2.(MECHANICAL PROPERTIES)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3, Table 1.(CHEMlCAL COMPOSITION)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2(Dimension)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1(Mass)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2(Freedom from defects-Castings)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Freedom from defects-Ingots)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1, Table 2(Elongation)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1, Table 2(0.2% Proof stress)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1, Table 2(Tensile strength)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5(Pressure Test)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5(Pressure Test)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5(Pressure Test - IS 318)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
-

8346

Delta Testing and Research Laboratories Private Limited (C5)

9179506

IS 12406 (2021)

Medium density fibre boards for general purpose - Specification

All Grade / Type / Size / Designation

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clauses 5.2, 9 and 10.2.2(Density)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Clauses 5.2, 9 and 10.2.2(Density)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Clauses 5.2, 9 and 10.2.2(Variation from mean density)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Clauses 5.2, 9 and 10.2.2(Moisture Content)	-	1500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Clauses 5.2, 9 and 10.2.2(Variation from mean moisture content)	-	1500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Clauses 5.2, 9 and 10.2.2(Linear expansion (Thickness Swelling in Water) Due to general Absorption after 24h soaking)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Clauses 5.2, 9 and 10.2.2(Internal Bond Strength)	-	1500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Clauses 5.2, 9 and 10.2.2(Internal Bond strength (i) (After Cyclic test) (ii) (After accelerated water resistance test))	-	1500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Clauses 5.2, 9 and 10.2.2(Modulus of Rupture a) Avg. Value b) Min. Individual)	-	1500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Clauses 5.2, 9 and 10.2.2(Modulus of Elasticity a) Avg. Value b) Min. Individual)	-	1500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Clauses 5.2, 9 and 10.2.2(Screw withdrawl strength (i) Face (ii) Edge (For thickness >12mm))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Clauses 5.2, 9 and 10.2.2(Formaldehyde Content (i) For Formaldehyde Class, E1 (ii) For Formaldehyde Class, E2)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Clauses 5.2, 9 and 10.2.2(Steady State Formaldehyde emission (Fc (i) For Formaldehyde Class, E1 (ii) For Formaldehyde Class, E2)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
8(DIMENSIONS AND TOLERANCES)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
-

8347

Delta Testing and Research Laboratories Private Limited (C5)

9179506

IS 280 (2006)

Mild steel wire for general engineering purposes (Fourth Revision)

All type of Grade/Type/Size/Designation

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9(Tensile Test On UTM)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 11(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 13(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9(Tensile Test On UTM)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 11(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 13(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9(Tensile Test On UTM)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 11(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 13(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 AND AS PER IS 7887(MICRO ALLOY)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 AND AS PER IS 7887(ALUMINIUM)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 AND AS PER IS 7887(PHOSPHORUS)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 AND AS PER IS 7887(SULPHUR)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 AND AS PER IS 7887(MANGANESE)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 AND AS PER IS 7887(SILICON)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 AND AS PER IS 7887(CARBON)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 & 8(Ovality)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 & 8(Diameter)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2(Wrapping Test)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.3(Bend test)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10(Finish)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11(Coating test)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
13(Freedom from defects)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 13(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 11(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9(Tensile Test On UTM)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9(Tensile Test On UTM)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 11(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 13(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 6 and Note 3 of IS 7887(Any Instrumental Method/Chemical Method)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 6 and Note 3 of IS 7887(Copper)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
14(Packing)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
15(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 6 and Note 3 of IS 7887(Copper)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
-

8348

Delta Testing and Research Laboratories Private Limited (C5)

9179506

IS 5509 (2021)

Fire Retardant Plywood - Specification ( Third Revision )

All Grade / Type / Size / Designation

12450 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.3 (Table 1)(b) 6 mm and above)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1(Flame retardant chemicals)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.2(Flame retardant and preservative treatment)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.3(Treatment)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5(PREPARATION FOR TREATMENT)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1.1(Treatment of Plywood by Pressure Impregnation after Manufacture)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1.2(Soaking Treatment)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2(Choice of Treatment)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7(CONDITIONING AFTER TREATMENT)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1(Dimensions)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2(Thickness)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.3, Taable-1 (i)(Tolerance- Length)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9(WORKMANSHIP AND FINISH)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10(SAMPLING AND CRITERIA FOR CONFORMITY)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11 (a)(For flammability)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11 (b)(For flame penetration)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11 (c)(For rate of burning)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
12.1 Table - 2 (i)(Moisture content, percent, Max)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
12.1 Table - 2 (ii)(Flammability (see Note 1), minutes, Min)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
12.1 Table - 2 (iii)(Flame penetration (see Note 2), minutes, Min)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
12.1 Table - 2 (iv)(Rate of burning (see Note 3), minutes, Min)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
12.2(Other Tests)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
14(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
-

8349

KC INDIA TEST LABORATORIES LLP, GHAZIABAD

9140406

IS 16102 : Part 1 (2012)

Self - Ballasted led lamps for general lighting services: Part 1 safety requirements

Rating: Upto 35 Watt

22000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking)	-	400	20% Discount to BIS
6(Interchangeability)	-	2000	20% Discount to BIS
7(Protection against accidental contact with live parts)	-	5000	20% Discount to BIS
8(Insulation Resistance and Electric Strength)	-	2000	20% Discount to BIS
9(MECHANICAL STRENGTH)	-	1000	20% Discount to BIS
10(cap temperature)	-	1000	20% Discount to BIS
11(Resistance to Heat)	-	1800	20% Discount to BIS
12(Resistance to Flame and Ignition)	-	2000	20% Discount to BIS
13(Fault conditions)	-	5000	20% Discount to BIS
14(Creepage distance and clearances)	-	1800	20% Discount to BIS

06 Jun, 2027

-
For rated voltage up to 250V AC, 50 Hz and rated wattage up to 35 W. • Restricted to Cap type B22d, E14 & E27 only. Amendment No-3 including w.e.f. 06.03.2024 (rating upto 35 watt)

8350

Delta Testing and Research Laboratories Private Limited (C5)

9179506

IS 278 (2009)

Galvanized steel barbed wire for fencing - Specification (Fourth Revision)

All type of Grade/Type/Size/Designation

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Type A/Type B)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5 Table-1(Sizes Diameter of Line wire)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5 Table-1(Sizes Diamater of Point wire)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5 Table-1(Sizes Mass of Completed barbed wire)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5 Table-1(Sizes Distance between two barbs)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5 Table-1(Sizes No. of Lays between the two consequtive barbs)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1(Manufacture)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2(Manufacture)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2(Manufacture)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.3(Manufacture)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8(CHROMATING)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1(Freedom from defects)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2(Freedom from defects)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2(Freedom from defects)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2(Freedom from defects)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
12.1(Tensile Strength)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
12.1(Breaking load)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
12.2.1(Mass of zinc coating (line wire))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
12.2.2(Mass of zinc coating (point wire))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
12.2(Uniformity of zinc coating)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
12.3(Ductility)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 7.2(Cut Angle)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 7.2(Length of Barbs)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 7.2(Finishing of Barbs)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 7.1(General)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11(Sampling)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
13(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
-

8351

Delta Testing and Research Laboratories Private Limited (C5)

9179506

IS 210 (2009)

Grey iron castings - Specification (First Revision)

All type of Grade/Type/Size/Designation

4500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Chemical Composition(chemical composition shall be as agreed to between the purchaser and the manufacturer.))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1(WORKMANSHIP AND FINISH)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10.1(FREEDOM FROM DEFECTS)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10.2(FREEDOM FROM DEFECTS)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
13(SIZE OF TEST BARS-Diameter)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
13(SIZE OF TEST BARS-Length)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
15, Table 3(TENSIL.E TEST- IS 1608 Part1 )	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
16, Table 3(Hardness Test)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
17,Annex B(TRANSVERSE TEST)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
18(HYDROSTATIC TEST)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6(Chemical Composition(chemical composition shall be as agreed to between the purchaser and the manufacturer.))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1(WORKMANSHIP AND FINISH)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10.1(FREEDOM FROM DEFECTS)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10.2(FREEDOM FROM DEFECTS)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
13(SIZE OF TEST BARS-Diameter)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
13(SIZE OF TEST BARS-Length)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
15, Table 3(TENSIL.E TEST- IS 1608 Part1 )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
16, Table 3(Hardness Test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
17,Annex B(TRANSVERSE TEST)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
18(HYDROSTATIC TEST)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9(IS 7754)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9(IS 7754)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9(Microstructure)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
21(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9(Microstructure)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
-

8352

Delta Testing and Research Laboratories Private Limited (C5)

9179506

IS 1659 (2004)

Block boards - Specification (Fourth Revision)

All Grade / Type / Size / Designation

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.2.6(Spot test - Annexure L)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2.5(Modulus of elasticity - MINIMUM INDIVIDUAL - Annexure K)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2.5(Modulus of elasticity - AVERAGE - Annexure K)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2.5(Modulus of rupture - MINIMUM INDIVIDUAL - Annexure K)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2.5(Modulus of rupture - AVERAGE - Annexure K)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2.4(Mycological Test [for MR grade only] - Annexure J)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2.3(Adhesion of Plies - Annexure H)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2.2 (Resistance to water - Annexure G, Annexure H [For MR Grade])	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2.2 (Resistance to water - Annexure G, Annexure H [For BWP grade])	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2.1(Dimensional Changes caused by humidity Change in local planeness - Annexure F)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2.1(Dimensional Changes caused by humidity - Delamination - Annexure F)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2.1(Dimensional Changes caused by humidity - Change in thickness - at 40% RH - Annexure F)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2.1(Dimensional Changes caused by humidity - Change in Thickness - at 90% RH - Annexure F)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 40% RH - Annexure F)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 90% RH - Annexure F)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.3(Dimensional Requirements - Variation in thickness - Annexure E)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.3(Dimensional Requirements - Squareness - Annexure D)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.3(Dimensional Requirements - Edge Straightness - Annexure D)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.3(Dimensional Requirements - Thickness - Annexure E)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.3(Dimensional Requirements - Width - 8.1.4)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.3(Dimensional Requirements - Length - 8.1.4)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1.3, 6.3.3, IS 1328(Visual Inspection - Permissible Defects - IS 1328 [test method for DECORATIVE type])	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1.3, 6.3.3, IS 303(Visual Inspection - Permissible Defects - IS 303 [test method for COMMERCIAL type])	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2.6 (mechanical)(Spot test - Annexure L)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
cl. 11(marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
cl. 11.1(marking - BIS certification marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
-

8353

Delta Testing and Research Laboratories Private Limited (C5)

9179506

IS 1328 (1996)

Veneered Decorative Plywood -Specification

All Grade / Type / Size / Designation

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Grade - For BWR)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1(Grade - For MR)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.2(Type - For Type 1)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.2(Type - For Type 2)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1.1(Requirements - Open splits, checks or open joints - For Type 1 - Cl. 7.1.1)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2.1(Requirements - Open splits, checks or open joints - For Type 2 - Cl. 7.2.1)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1.2(Requirements - Other defects - For Type 1 - Cl. 7.1.2)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2.2(Requirements - Other defects - For Type 2 - Cl. 7.2.2.)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1.3(Requirements - Other Charcteristics and Manufacturing Defects - For Type 1 - Cl. 7.1.3)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2.3(Requirements - Other Charcteristics and Manufacturing Defects - For Type 2 - Cl. 7.2.3)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8(Dimensions & Tolerances - Length - Cl. 8)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8(Dimensions & Tolerances - Width - Cl. 8)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8(Dimensions & Tolerances - Squareness - Annexure C)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9(Finish - Cl. 9.1, 8.3)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9(Finish - Cl. 9.2, 8.3)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11(Tests - Moisture Content - Part 1 of IS 1734)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11(Tests - Water Resistance Test - Cl. 11.1.2.1 [for MR Grade])	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11(Tests - Water Resistance Test - Cl. 11.1.2.2 [for BWR Grade])	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
-

8354

Delta Testing and Research Laboratories Private Limited (C5)

9179506

IS 710 (2010)

Marine plywood - Specification (Second Revision)

All Grade / Type / Size / Designation

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.1(MARKING)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
11.2(MARKING)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1(WORKMANSHIP AND FINISH )	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2(WORKMANSHIP AND FINISH )	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.3(WORKMANSHIP AND FINISH )	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.5(WORKMANSHIP AND FINISH )	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(DIMENSIONS)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(DIMENSIONS)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2(DIMENSIONS)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.3(DIMENSIONS)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.3(DIMENSIONS)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1.1(MOISTURE CONTENT)	-	1500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1.2 , 9.1.2.1(Glue Adhesion in Dry State)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1.2 , 9.1.2.2(Glue Adhesion in Dry State)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1.3 , 9.1.3.1.1(Water resistance test)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1.3 , 9.1.3.1.2(Water resistance test)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1.5(Mycological test)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1.5 , 9.1.3.1.1(Mycological test)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1.5 , 9.1.3.1.2(Mycological test)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1.4(Tensile strength)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1.6 (Table 3)(Static bending strength)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1.6 (Table 3)(Static bending strength)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1.7 (Table 4)(Wet bending strength)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1.7 (Table 4)(Wet bending strength)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1.8(Retention of preservative)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Rupture: Across the Face Grain: Minimum Individual))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Rupture: Across the Face Grain: Average))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Rupture: Along the Face Grain: Minimum Individual))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Rupture: Along the Face Grain: Average))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1.7 (Table 4)(Cl. 9.1.7 (Table 4) (Modulus of Elasticity: Across the Face Grain: Minimum Individual))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Elasticity: Across the Face Grain: Average))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Elasticity: Along the Face Grain: Minimum Individual))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Elasticity: Along the Face Grain: Average))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Rupture: Across the Face Grain: Minimum Individual))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Rupture: Across the Face Grain: Average))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Rupture: Along the Face Grain: Minimum Individual))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Rupture: Along the Face Grain: Average))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1.6 (Table 3)(Cl. 9.1.6 (Table 3) (Modulus of Elasticity: Across the Face Grain: Minimum Individual))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Elasticity: Across the Face Grain: Average))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Elasticity: Along the Face Grain: Minimum Individual))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Elasticity: Along the Face Grain: Average))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1.4(Cl. 9.1.4 (Tensile Strength: Sum of the Tensile Strength in two directions))	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1.4 (Cl. 9.1.4 (Tensile Strength: Perpendicular to grain))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1.4(Cl. 9.1.4 (Tensile Strength: Parallel to grain))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.9.1.5,9.1.3.1.1(Cl.9.1.5 (Mycological Test),9.1.3.1.1 (Glue Shear Strength: Individual))	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.9.1.5,9.1.3.1.1(Cl.9.1.5 (Mycological Test),9.1.3.1.1 ( Glue Shear Strength: Average))	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1.3, 9.1.3.1.1 (Cl. 9.1.3 (Water Resistance Test) , 9.1.3.1.1 (Glue Shear Strength: Individual))	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1.3, 9.1.3.1.1 (Cl. 9.1.3 (Water Resistance Test ), 9.1.3.1.1 (Glue Shear Strength: Average))	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1.2, 9.1.2.1 (Cl. 9.1.2 (Glue Adhesion in Dry State), 9.1.2.1 ( Glue Shear Strength: Individual))	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1.2, 9.1.2.1 (Cl. 9.1.2 (Glue Adhesion in Dry State), 9.1.2.1 ( Glue Shear Strength: Average ))	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
cl.5.1(manufacture - Veneers)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
cl.5.1(manufacture - Veneers - moisture content)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
cl.5.1.1(manufacture - Veneers - Defects in Veneers)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
cl.5.2.2(Assembly - Thickness of Veneers)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
-

8355

Delta Testing and Research Laboratories Private Limited (C5)

9179506

IS 15778 (2007)

Chlorinated polyvinyl chloride (Cpvc) pipes for potable hot and cold water distribution supplies - Specification

All Grade

100000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5 Table 1(Classification of pipes)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2.1 Annex B(Chloride Content of Resin)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.3(Compound Properties)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.3.1 Annex B(Chloride content)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.3.2 Annex C(Verification of the Malfunction Temperature, Tmal: )	-	5000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.3.2 IS 13360 (Part 3/See 1)(Density)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 IS 12235 (Part 1) Table 2(Dimension of Pipes: Mean outside Diameter)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1,7.1.1 IS 12235 (Part 1) Table 2(Outside Diameter at any point)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1.2 IS 12235 (Part 1) Table 2(Wall Thickness )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1.3 (Effective length)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8(Pipe Ends)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9(PHYSICAL AND CHEMICAL CHARACTERISTICS)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1(Visual Appearance)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1(Visual Appearance)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2 IS 12235 (Part 3)(Opacity)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.3,IS 4985 Cl. 10.3(Lead (first extraction))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.3,IS 4985 Cl. 10.3(Lead (third extraction))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.3,IS 4985 Cl. 10.3(Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.3,IS 4985 Cl. 10.3(Cadmium (for all three extracts) )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.3,IS 4985 Cl. 10.3(Mercury (for all three extracts) )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction) )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances including di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate')	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.4 IS 12235(Part 5/Sec 1 and Sec 2)(Reversion Test : When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.5 IS 12235(Part 2)(Vicat Softening Temperature: When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen shall not be less than 110°C.)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.6 IS 12235(Part 14)(Density)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10(Mechanical Properties)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	10000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	10000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	10000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10.2 Table 3 IS 12235 (Part 8/Sec 1)(Thermal Stability by Hydrostatic Pressure Testing)	-	10000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10.3 IS 4985 Table 4(Resistance to External Blow at O°C: When tested by the method prescribed in IS 4985, with classified striker mass and drop height as given in Table 4, the pipe shall have a true impact rate of not more than 10 percent.)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10.4 IS 12235(Part 19)(Flattening Test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10.5 IS 12235(Part 13)(Tensile Strength : When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C. )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5 Table 1(Classification of pipes)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2.1 Annex B(Chloride Content of Resin)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.3(Compound Properties)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.3.1 Annex B(Chloride content)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.3.2 Annex C(Verification of the Malfunction Temperature, Tmal: )	-	10000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.3.2 IS 13360 (Part 3/See 1)(Density)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 IS 12235 (Part 1) Table 2(Dimension of Pipes: Mean outside Diameter)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1,7.1.1 IS 12235 (Part 1)Table 2(Outside Diameter at any point (Minimum))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1.2 IS 12235 (Part 1)Table 2(Wall Thickness (Minimum))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1.3 (Effective length)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.0(Pipe Ends)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.0(PHYSICAL AND 1CHARACTERISTICS)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1(Visual Appearance)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1(Visual Appearance)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2 IS 12235 (Part 3)(Opacity)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.3,IS 4985 Cl. 10.3(Lead (first extraction))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.3,IS 4985 Cl. 10.3(Lead (third extraction))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.3,IS 4985 Cl. 10.3(Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.3,IS 4985 Cl. 10.3(Cadmium (for all three extracts) )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.3,IS 4985 Cl. 10.3(Mercury (for all three extracts) )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction) )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances including di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate')	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.4 IS 12235(Part 5/Sec 1 and Sec 2)(Reversion Test : When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.5 IS 12235(Part 2)(Vicat Softening Temperature: When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen shall not be less than 110°C.)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.6 IS 12235(Part 14)(Density)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10.0(Mechanical Properties)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	10000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	10000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	10000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10.2 Table 3 IS 12235 (Part 8/Sec 1)(Thermal Stability by Hydrostatic Pressure Testing)	-	10000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10.3 IS 4985 Table 4(Resistance to External Blow at O°C: When tested by the method prescribed in IS 4985, with classified striker mass and drop height as given in Table 4, the pipe shall have a true impact rate of not more than 10 percent.)	-	10000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10.4 IS 12235(Part 19)(Flattening Test)	-	10000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10.5 IS 12235(Part 13)(Tensile Strength : When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C. )	-	10000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1.2(Wall Thickness (Maximum))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1.1(Outside Diameter at any point (Maximum))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.3(K value Test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.3.3(Density)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
Upto 150 mm only

8356

Delta Testing and Research Laboratories Private Limited (C5)

9179506

IS 15801 (2008)

Polypropylene - Random copolymer pipes for hot and cold water supplies - Specification

All Grade

58000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4( Designation)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 7(Dimensions Of Pipes)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8(Visual Appearance)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9.1(Hydraulic Characteristics)	-	5000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9.2(Fusion Compatibility)	-	5000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9.3(Reversion Test )	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9.4 & Annex B(Impact Strength)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9.5(Density)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9.6(Melt Flow Rate)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9.7(Carbon Black Content & Dispersion)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9.8(Thermal Stability By Hydrostatic Pressure Testing)	-	40000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9.9(Opacity)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5(Colour)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
Upto 200 mm only

8357

Alpha Test House Private Limited, Delhi

8131026

IS 17505 : Part 1 (2021)

Specification for Thermosetting Insulated Fire Survival Cables for Fixed Installation having Low Emission of Smoke and Corrosive Gases when Affected by Fire for Working Voltages upto and including 1100 Vac and 1500 Vdc

140000.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	1000	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	500	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	1000	-
Cl. 11,14,16, Table 4 and Table 6 of IS 17505 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	500	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 36)-1984(Diameter of armour Wire)	-	250	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 37)-1984(Tensile strength and elongation at break)	-	250	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 38)-1984(Torsion Test on galvanised steel wire for armouring)	-	250	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 39)-1984(Winding Test for Formed Wires)	-	250	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 40)-1984(Uniformity of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	350	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 41)-1984(Mass of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	350	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 42)-1984(Resistivity test)	-	500	-
Table 1 and Table 2 of IS 17505 -1: 2021, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	3000	-
Cl 18.2 of IS 17505-1:2021 & IS:10810 (Part 45)-1984(High voltage test)	-	2000	-
Table 1 of IS 17505-1 :2021 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	2000	-
Cl. 18.6 of IS 17505-1:2021 & IS:10810 (Part 58)-1998(Oxygen index)	-	3000	-
Cl. 18.7 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	3000	-
Table-1 & Table-2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	3000	-
Specification for thermosetting insulated fire survival cables for fixed installation having low emission of smoke and corrosive gases when affected by fire for working voltages upto and including 1100 V A.C. and 1500 V D.C(Hot deformation)	-	500	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	10000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	10000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	10000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	10000	-
Table 1 of IS 17505-1: 2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	500	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 30)-1984(Hot set test)	-	2000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone Resistance test)	-	5000	-
Cl 18.5.1 of IS 17505-1 :2021 & IS:10810 (Part 61)-1988(Flame test on single cable)	-	2000	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	500	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	0	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	0	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	0	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 7)-1984(Tensile strength and elongation at break.)	-	1500	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Cl 18.6 of IS 17505-1: 2021 & IS:10810 (Part 58)-1998(Oxygen Index.)	-	0	-
Cl 18.8 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	0	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone resistance test)	-	0	-
Table 2 of IS 17505-1:2021 & IS:10810 (Part 15)-1984(Hot deformation)	-	0	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	0	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	0	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	0	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	500	-
Cl 18.2of IS 17505-1:2021 & IS:10810 (Part 45)-1984.(High Voltage test.)	-	0	-
Cl 18.5of IS 17505-1:2021 & IS:10810 (Part 53)-1984(Flammability Test)	-	1000	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 20)-1984(Cold bend test)	-	500	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	0	-
Cl 18.5 of IS 17505-1:2021 & IS:10810 (Part 61)-1988(Flammability Test)	-	0	-
Cl 18.9 of IS 17505-1:2021(Water immersion test ( effect of water on sheath of cable))	-	2000	-
Cl 18.8 of IS 17505-1:2021& IS:10810 (Part 63)-1993(Smoke density test)	-	5000	-
Cl. 3.5, 18.4 & Annex-E of IS 17505-1:2021(Circuit integrity test under fire)	-	45000	-
Cl. 17.1 Table 9 (iv) e(Heat Shock)	-	500	-
Cl. 17.1 Table 9 (iv) h(Water absorption (Gravimetric))	-	3000	-
Cl. 17.1 Table 9 (vii) b(Flame test on bunched cable)	-	5000	-
Cl. 17.1 Table 9 (ix)(Abrasion resistance test)	-	5000	-
IS 191:2007 & IS 440(Copper purity test)	-	0	-

17 May, 2027

-
Included w.e.f. 01.05.2024 Exclusion: IS 191:2007 & IS 440 (Copper Purity Test)

8358

Delta Testing and Research Laboratories Private Limited (C5)

9179506

IS 303 (1989)

Plywood for General Purposes -

BWR & MR Grade

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	750	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	750	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	750	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	750	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	750	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	750	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	750	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	750	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
11.2.2(Glue Adhesion - Mycological test - 11.2.2, Part 7 of IS 1734 [for MR Garde only])	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for MR Grade])	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for BWR Grade])	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
11.3(Moisture Content - Part 1 of IS 1734)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
8(Dimensions & Tolerances - Squareness - Annexure C)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
8(Dimensions & Tolerances - Width - Cl. 8)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
8(Dimensions & Tolerances - Length - Cl. 8)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9(Workmanship and Finish - Cl.9, 8.3, Annexure C)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9(Workmanship and Finish - Cl.9, 8.3, Annexure C)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2, Table 1, Table 2(Quality Requirements - Cl. 5.2)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1(Type - For BB Type)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1(Type - For AB Type)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1(Type - For AA Type)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4(Grade - For MR grade)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4(Grade - For BWR grade)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
cl. 13.1(marking)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
cl. 13.2(marking)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
-

8359

Delta Testing and Research Laboratories Private Limited (C5)

9179506

IS 8042 (2015)

White portland cement - Specification (Third Revision)

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5 - Table - 1 i(Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5 - Table - 1 ii(Iron oxide - Cl 4.5 of IS 4032:1985)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5 - Table - 1 iii(Insoluble residue - Cl 4.10 of IS 4032:1985)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5 - Table - 1 iv(Magnesia - Cl 4.8 of IS 4032:1985)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5 - Table - 1 v(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5 - Table - 1 vi(Loss on ignition - Cl 4.2 of IS 4032:1985)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5 - Table - 1 vii(Chloride content - Cl 4.13 of IS 4032:1985)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6 -Table 2- i(Fineness 4031 Part 2)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6 -Table 2- ii- a(Expansion after aeration - 4031 Part 3)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6-Table 2- ii- b(Expansion after aeration- 4031 Part 3)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6 -Table 2- vi(Degree of whiteness-Annex B)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5 - Table - 1 i(Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5 - Table - 1 ii(Iron oxide - Cl 4.5 of IS 4032:1985)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5 - Table - 1 iii(Insoluble residue - Cl 4.10 of IS 4032:1985)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5 - Table - 1 iv(Magnesia - Cl 4.8 of IS 4032:1985)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5 - Table - 1 v(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5 - Table - 1 vi(Loss on ignition - Cl 4.2 of IS 4032:1985)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5 - Table - 1 vii(Chloride content - Cl 4.13 of IS 4032:1985)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6 -Table 2- i(Fineness 4031 Part 2)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6 -Table 2- ii- a(Expansion after aeration - 4031 Part 3)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6-Table 2- ii- b(Expansion after aeration- 4031 Part 3)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6 -Table 2- vi(Degree of whiteness-Annex B)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6, table-2, ii(Whiteness)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 6 Table 2, SI No. (v) (Compressive strength of Transverse Specimen, 672 ± 4 h)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 6 Table 2, SI No. (v) (Compressive strength of Transverse Specimen, 168 ± 2 h)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 6 Table 2, SI No. (v) (Compressive strength of Transverse Specimen, 72 ± 1 h)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 6 Table 2, SI No. (v) (Transverse Strength, 672 ± 4 h)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 6 Table 2, SI No. (v) (Transverse Strength, 168 ± 2 h)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 6 Table 2, SI No. (v) (Transverse Strength, 72 ± 1 h)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
-

8360

Delta Testing and Research Laboratories Private Limited (C5)

9179506

IS 15328 (2003)

Unplasticized Non-Pressure Polyvinyl Chloride ( PVC -U ) Pipes for use in Underground Drainage and Sewerage Systems -

All Grade

24000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5,5.2(Composition of the material The material shall contain a minimum of 0.3 percent of rutile grade titanium dioxide.)	-	1000	-
6.1,6.1.1 IS 12235 (Part 1) Table 1(Dimension of Pipes: Mean outside Diameter, dem)	-	1000	-
6.1,6.1.1 IS 12235 (Part 1) Table 1(Outside Diameter at any point, de)	-	1000	-
6.1.2 IS 4985 Table 2(Wall Thickness, e )	-	1000	-
6.1.3 (Length of Pipe)	-	1000	-
6.1.4, Table 3(Dimensions of integral sockets and spigot ends :- a) Elastomeric Sealing Ringsockets and spigot ends i)Meean inside dia. Of socket, dsm)	-	1000	-
6.1.4, Table 3(ii) Min. depth of engagement, A. )	-	1000	-
6.1.4 Table 3(iii) Depth of sealing Zone C )	-	1000	-
6.1.4, Table 3(iv) Length of spigot, l1)	-	1000	-
6.1.4, Table 3(v) Chamfer length, H : Approx.)	-	1000	-
6.1.4.1 (wall thickness of sockets e2 min=0.9e )	-	1000	-
6.1.4.1 (e3min=0.75e)	-	1000	-
6.1.4, Table 4(b) Solvent Cement Joint sockets and spigot ends i) Mean inside dia. Of socket, dsm)	-	1000	-
6.1.4, Table 4(ii) Length of Solvent Cement socket, l2 )	-	1000	-
6.1.4, Table 4(iii) Length of spigot, l1, 100 mm Min.)	-	1000	-
6.1.4, Table 4(iv) Chamfer length, H, 7 mm Approx.)	-	1000	-
7(Physical characteristics )	-	1000	-
7.1(Appearance:- )	-	1000	-
7.1(Appearance:- )	-	1000	-
7.2(Colour )	-	1000	-
7.3 IS 1223S ( Part 2)(Vicat Softening Temperature When determined according to IS 1223S ( Part 2), shall not be lessthan 79°C.)	-	1000	-
7.4 IS 1223S ( Part 5)(Longitudinal Reversion: When tested according to the methodprescribed in IS 1223S ( Part 5), shall not exceed ± 5 percent. The pipe shall not exhibit any blisters, bubbles or crackson completion of the test.)	-	1000	-
8(MECHANICAL CHARACTERISTICS)	-	1000	-
8.1 Annex B(Resistance to External Blows at 0ºC: When tested according to the method prescribed in Annex B, the pipes hall have a true impact rate of not more than I0 percent.)	-	1000	-
8.2 Annex C Table 5(Ring Stiffness: When tested according to the method described in Annex C,the ring stiffness of the pipe shall be as stated in Table 5)	-	1000	-
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(Resistance to internal Hydrostatic Pressure(Type Test) a) Acceptance Test:(1h at 27 0 C) )	-	2000	-
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(b) Type Test:(1000h at 60 0 C) )	-	1000	-
9 9.1, IS 5382(JOINTS:- a) Elastomeric Sealing Rings)	-	1000	-
9.2 IS 14182(b) Solvent cement)	-	1000	-
10(Performance requirements)	-	1000	-
10.1.1 Annex D(Internal hydrostatic pressure test for elastomeric sealing ring joints)	-	2000	-
10.1.2 Annex E(Internal negative hydrostatic pressure test (internal vacuum) for elastomeric sealing ring joints)	-	2000	-
10.2.1(Internal hydrostatic pressure test for solvent cemented Joints)	-	2000	-
10.2.2(Internal negative hydrostatic pressure test (internal vacuum)for solvent cemented joints)	-	2000	-
'7.5 (amdt.7)(Effect on Water (Type test))	-	1000	-
5.3(Qualitative)	-	1000	-
12(Marking)	-	1000	-

21 Aug, 2027

-
Upto 500 mm only

8361

Delta Testing and Research Laboratories Private Limited (C5)

9179506

IS 455 (2015)

Portland slag cement - Specification

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 Table 1 v(Transverse strength (optional) IS 4031(Part 8) )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 Table 1 iv c(Compretsive Strenqth 672 ± 4 hr IS 4031(Part 6))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 Table 1 iv b(Compretsive Strenqth 168 ± 2 hr IS 4031(Part 6))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 Table 1 iv a(Compretsive Strenqth .72 ± 1 hr IS 4031(Part 6))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 Table 1 iii b(Setting Time ( by Vicat Apparatus ), Final IS 4031(Part 5))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 Table 1 iii a(Setting Time ( by Vicat Apparatus ),Initial IS 4031(Part 5))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 Table 1 ii b(Soundness, Autoclave expansion IS 4031(Part 3) )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 Table 1 ii a(Soundness, Le-Chate1ier expansion IS 4031(Part 3) )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 Table 1 i(Fineness IS 4031(Part 2))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 vii( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 vi(Chloride content - Cl 4.13 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 v(Loss on ignition - Cl 6.2 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 iv(Sulphide sulphur (S) - Cl 6.12 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 6.11 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 ii(Magnesia - Cl 6.8 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 i(Insoluble residue - Cl 6.9 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 Table 1 v(Transverse strength (optional) IS 4031(Part 8) )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 Table 1 iv c(Compretsive Strenqth 672 ± 4 hr IS 4031(Part 6))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 Table 1 iv b(Compretsive Strenqth 168 ± 2 hr IS 4031(Part 6))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 Table 1 iv a(Compretsive Strenqth .72 ± 1 hr IS 4031(Part 6))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 Table 1 iii b(Setting Time ( by Vicat Apparatus ), Final IS 4031(Part 5))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 Table 1 iii a(Setting Time ( by Vicat Apparatus ),Initial IS 4031(Part 5))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 Table 1 ii b(Soundness, Autoclave expansion IS 4031(Part 3) )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 Table 1 ii a(Soundness, Le-Chate1ier expansion IS 4031(Part 3) )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 Table 1 i(Fineness IS 4031(Part 2))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 vii( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 vi(Chloride content - Cl 4.13 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 v(Loss on ignition - Cl 6.2 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 iv(Sulphide sulphur (S) - Cl 6.12 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 6.11 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 ii(Magnesia - Cl 6.8 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 i(Insoluble residue - Cl 6.9 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 7 Table-2(Cl. 7 Table-2 i (Fineness ))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 7 Table-2(Cl. 7 Table-2 ii a (Expansion after aeration ))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 7 Table-2(Cl. 7 Table-2 ii a (Soundness , Le Chatelier Expansion ))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 7 Table-2(Cl. 7 Table-2 ii b (Expansion after aeration ))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 7 Table-2(Cl. 7 Table-2 ii b (Soundness , Autoclave Expansion ))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 7 Table-2(Cl. 7 Table-2 iii a (Setting time Initial))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 7 Table-2(Cl. 7 Table-2 iii b (Setting time Final))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 7 Table-2(Cl. 7 Table-2 iv a (Compressive Strength 72±1 hr IS))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 7 Table-2(Cl. 7 Table-2 iv b (Compressive Strength 168±2 hr ))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 7 Table-2(Cl. 7 Table-2 iv c (Compressive Strength 672±4 hr) )	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 7 Table-2(Cl. 7 Table-2 v (Transverse Strength (Optional) )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11.3(Consistency(IS:4031(Pt-4)-1988)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
-

8362

Delta Testing and Research Laboratories Private Limited (C5)

9179506

IS 15058 (2002)

PVC water - Stops at transverse contraction joints for use in masonry and concrete dams - Specification

All Grade

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2 Table 1,vii) f) Annex C(Stability in effects of alkalies test Dimension change)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vii) c) Annex C(Stability in effects of alkalies test Change in hardness at 7 days )	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vii) b) Annex C(Stability in effects of alkalies test Weight decrease at 7 day)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vii) a) Annex C(Stability in effects of alkalies test Weight increase at 7 day)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vii) e) Annex C(Stability in effects of alkalies test Weight decrease at 28 days)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vii) d) Annex C(Stability in effects of alkalies test Weight increase at 28 days)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1, iv) Annex A(Water absorption)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1, v) Annex G of IS 9766(Cold bend temperature at which samples does not crack)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1, iii) IS 13360 (Part 5/Sec 11)(Hardness (Shore A))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vi) b) Annex B(Accelerated extraction test: Elongation)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1, ii) IS 13360 (Part 5/Sec 1)(Elongation,)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7(PACKING : The water-stop shall be packed in coil form, the inside diameter of which shall not be less than 300 mm)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vi) a) Annex B(Accelerated extraction test Tensile strength)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1, i) IS 13360 (Part 5/Sec 1)(Tensile strength)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3(PVC WATER-STOPS)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.1(Materials)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2(Test Requirements)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.3(Colour)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4,4.1 Fig.1(SHAPE AND DIMENSIONS)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.1 (Tolerances on Dimensions a) Width)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.1 (Tolerances on Dimensions b) Thickness)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5, 5.1(WORKMANSHIP AND FINISH)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2(WORKMANSHIP AND FINISH)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vii) f) Annex C(Stability in effects of alkalies test Dimension change)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vii) c) Annex C(Stability in effects of alkalies test Change in hardness at 7 days )	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vii) b) Annex C(Stability in effects of alkalies test Weight decrease at 7 day)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vii) a) Annex C(Stability in effects of alkalies test Weight increase at 7 day)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vii) e) Annex C(Stability in effects of alkalies test Weight decrease at 28 days)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vii) d) Annex C(Stability in effects of alkalies test Weight increase at 28 days)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1, iv) Annex A(Water absorption)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1, v) Annex G of IS 9766(Cold bend temperature at which samples does not crack)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1, iii) IS 13360 (Part 5/Sec 11)(Hardness (Shore A))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vi) b) Annex B(Accelerated extraction test: Elongation)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1, ii) IS 13360 (Part 5/Sec 1)(Elongation,)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7(PACKING : The water-stop shall be packed in coil form, the inside diameter of which shall not be less than 300 mm)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vi) a) Annex B(Accelerated extraction test Tensile strength)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1, i) IS 13360 (Part 5/Sec 1)(Tensile strength)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3(PVC WATER-STOPS)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.1(Materials)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2(Test Requirements)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.3(Colour)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4,4.1 Fig.1(SHAPE AND DIMENSIONS)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.1 (Tolerances on Dimensions a) Width)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.1 (Tolerances on Dimensions b) Thickness)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5, 5.1(WORKMANSHIP AND FINISH)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2(WORKMANSHIP AND FINISH)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vii) f) Annex C(Stability in effects of alkalies test Dimension change)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vii) c) Annex C(Stability in effects of alkalies test Change in hardness at 7 days )	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vii) b) Annex C(Stability in effects of alkalies test Weight decrease at 7 day)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vii) a) Annex C(Stability in effects of alkalies test Weight increase at 7 day)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vii) e) Annex C(Stability in effects of alkalies test Weight decrease at 28 days)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vii) d) Annex C(Stability in effects of alkalies test Weight increase at 28 days)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1, iv) Annex A(Water absorption)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1, v) Annex G of IS 9766(Cold bend temperature at which samples does not crack)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1, iii) IS 13360 (Part 5/Sec 11)(Hardness (Shore A))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vi) b) Annex B(Accelerated extraction test: Elongation)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1, ii) IS 13360 (Part 5/Sec 1)(Elongation,)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7(PACKING : The water-stop shall be packed in coil form, the inside diameter of which shall not be less than 300 mm)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vi) a) Annex B(Accelerated extraction test Tensile strength)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1, i) IS 13360 (Part 5/Sec 1)(Tensile strength)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3(PVC WATER-STOPS)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.1(Materials)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2(Test Requirements)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.3(Colour)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4,4.1 Fig.1(SHAPE AND DIMENSIONS)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.1 (Tolerances on Dimensions a) Width)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.1 (Tolerances on Dimensions b) Thickness)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5, 5.1(WORKMANSHIP AND FINISH)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2(WORKMANSHIP AND FINISH)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vii) f) Annex C(Stability in effects of alkalies test Dimension change)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vii) c) Annex C(Stability in effects of alkalies test Change in hardness at 7 days )	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vii) b) Annex C(Stability in effects of alkalies test Weight decrease at 7 day)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vii) a) Annex C(Stability in effects of alkalies test Weight increase at 7 day)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vii) e) Annex C(Stability in effects of alkalies test Weight decrease at 28 days)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vii) d) Annex C(Stability in effects of alkalies test Weight increase at 28 days)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1, iv) Annex A(Water absorption)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1, v) Annex G of IS 9766(Cold bend temperature at which samples does not crack)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1, iii) IS 13360 (Part 5/Sec 11)(Hardness (Shore A))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vi) b) Annex B(Accelerated extraction test: Elongation)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1, ii) IS 13360 (Part 5/Sec 1)(Elongation,)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7(PACKING : The water-stop shall be packed in coil form, the inside diameter of which shall not be less than 300 mm)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vi) a) Annex B(Accelerated extraction test Tensile strength)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1, i) IS 13360 (Part 5/Sec 1)(Tensile strength)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3(PVC WATER-STOPS)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.1(Materials)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2(Test Requirements)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.3(Colour)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4,4.1 Fig.1(SHAPE AND DIMENSIONS)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.1 (Tolerances on Dimensions a) Width)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.1 (Tolerances on Dimensions b) Thickness)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5, 5.1(WORKMANSHIP AND FINISH)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2(WORKMANSHIP AND FINISH)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
-

8363

Atmy Analytical Labs Pvt. Ltd., Faridabad

8167506

IS 15351 (2015)

Agro textiles – Laminated high density polyethylene (HDPE) woven geomembrane for water proof lining – Specification (second revision)

190000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(HDPE Tapes)	-	190000	Complete Testing Charges
3.2(HDPE Fabric)	-	190000	Complete Testing Charges
5(MANUFACTURE)	-	190000	Complete Testing Charges
5.1(Lamination)	-	190000	Complete Testing Charges
5.2(Panel Width)	-	190000	Complete Testing Charges
5.3(Joints/Seams)	-	190000	Complete Testing Charges
5.1.1 and 6.2(Thickness, mm- IS 7016: Part 1)	-	190000	Complete Testing Charges
5.1.1 and 6.2(Mass, g/sq m)	-	190000	Complete Testing Charges
5.1.1 and 6.2(Dimensions, mm- Annexure A of IS 11652)	-	190000	Complete Testing Charges
5.1.1 and 6.2(Length)	-	190000	Complete Testing Charges
5.1.1 and 6.2(Width)	-	190000	Complete Testing Charges
5.1.1 and 6.2(Carbon black content, Percent- IS 2530)	-	190000	Complete Testing Charges
5.1.1 and 6.2(Breaking Load on 20 cm X 10 cm Strip, Min )	-	190000	Complete Testing Charges
5.1.1 and 6.2(Before UV exposure IS 13162 (Part 5)	-	190000	Complete Testing Charges
5.1.1 and 6.2(Strain at Maximum load, Percent-IS 13162 (Part 5)	-	190000	Complete Testing Charges
Table-1(Breaking load on 20 × 10 cm strip, N, Min after)	-	190000	Complete Testing Charges
5.1.1 and 6.2( U.V exposure of 1000 h for warp and weft)	-	190000	Complete Testing Charges
5.1.1 and 6.2(Impact failure load, at 1524 mm drop,)	-	190000	Complete Testing Charges
5.1.1 and 6.2(Tear resistance, N, Min-Method A1 of IS 7016 (Part 3))	-	190000	Complete Testing Charges
5.1.1 and 6.2(Puncture resistance, N, Min-Annex D)	-	190000	Complete Testing Charges
5.1.1 and 6.2(Bursting strength (Ball burst),N/cm², Min-)	-	190000	Complete Testing Charges
5.1.1 and 6.2(IS 7016 (Part 6))	-	190000	Complete Testing Charges
5.1.1 and 6.2(Seam strength before UV exposure (N/mm), Min-IS 15060)	-	190000	Complete Testing Charges
Table-1(Seam strength after UV exposure N/mm, Min-Annex B and IS 15060)	-	190000	Complete Testing Charges
5.1.1 and 6.2(Hydrostatic resistance-Annex E)	-	190000	Complete Testing Charges
5.1.1 and 6.2(Ash content, percent, Max-Annex F)	-	190000	Complete Testing Charges

25 Feb, 2027

-
-

8364

Atmy Analytical Labs Pvt. Ltd., Faridabad

8167506

IS 17397 : Part 1 (2020)

Plastics ” Thermoplastic Polyurethanes for Moulding and Extrusion Part 1 Designation System and Basis for Specifications

ALL

24900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 3.5.2,Table-3(Hardness, Shore A, ISO 868)	-	24900	Complete Testing Charges
Clause 3.5.2,Table-3(Hardness,Shore D, ISO 868)	-	24900	Complete Testing Charges
Clause 3.5.3,Table-4(Tensile modulus of elasticity, Mpa, ISO 527)	-	24900	Complete Testing Charges
Clause 3.5.2,Table-3(Hardness, Shore A, ISO 868)	-	24900	Complete Testing Charges
Clause 3.5.2,Table-3(Hardness,Shore D, ISO 868)	-	24900	Complete Testing Charges
Clause 3.5.3,Table-4(Tensile modulus of elasticity, Mpa, ISO 527)	-	24900	Complete Testing Charges

25 Feb, 2027

-
-

8365

Atmy Analytical Labs Pvt. Ltd., Faridabad

8167506

IS 14650 (2023)

UNALLOYED AND ALLOYED STEEL INGOT AND SEMI-FINISHED PRODUCTS FOR RE-ROLLING PURPOSES - SPECIFICATION (First Revision)

ALL

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause - 7.1(CARBON)	-	7500	-
Clause - 7.1(SULPHUR)	-	7500	-
Clause - 7.1(PHOSPHURS)	-	7500	-
Clause - 7.1(MANGANESE)	-	7500	-
Clause - 7.1(NITROGEN)	-	7500	-
As per Clause 10(Dimension)	-	7500	-
As per Clause 10.1(Dimension Width)	-	7500	-
As per Clause 10.1(Dimension Thickness)	-	7500	-
As per Clause 10.2(Dimension Length)	-	7500	-
As per Clause 11/11.1/11.2/11.3/11.4(Tolerances)	-	7500	-
As per Clause 11.5(Bend)	-	7500	-
As per Clause 11.6(Camber)	-	7500	-
As per Clause 11.7 (i)(Out of Square)	-	7500	-
As per Clause 11.7 (ii)(Round Corners)	-	7500	-
As per Clause 11.7 (iii)(Ridges due to gas cutting)	-	7500	-
As per Clause 11.7 (iv)(Taper (Width variation on top and bottom surface at one location)	-	7500	-
As per Clause 11.7 (v)(Edge slanting (Width variation on top and bottom surface at one location)	-	7500	-
As per Clause 11.7 (vi)(Convexity(Difference in thickness from edge to curve)	-	7500	-
As per Clause 11.7 (vii)(Chamfering (Length variation on top and bottom surface at one location)	-	7500	-
As per Clause 11.7 (viii)(Wedge (Thickness variation at the edges along the cross section)	-	7500	-
As per Clause 11.7 (ix)(Scarfing pits)	-	7500	-
As per Clause 12/12.1/12.2/12.3(Freedom from defects)	-	7500	-
Clause. 13(Macro examination test.)	-	7500	-
Clause. 13(Macro examination test.)	-	7500	-
Clause. 13(Sulphur print.)	-	7500	-
Clause. 13(Inclusion content)	-	7500	-
Clause. 14(Marking)	-	7500	-
Clause.15(Ordering information)	-	7500	-
Clause.6.0(Manufacture)	-	7500	-
Clause.7.1(Silicon)	-	7500	-
Clause.7.1(Carbon Equbalant)	-	7500	-
Clause.7.1(Microalloy element)	-	7500	-

25 Feb, 2027

-
-

8366

Atmy Analytical Labs Pvt. Ltd., Faridabad

8167506

IS 3566 (2023)

TEXTILES - VISCOSE RAYON CUT STAPLE SPUN YARN - SPECIFICATION (SECOND REVISION)

all

44500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(GENERAL REQUIREMENTS)	-	44500	-
5.1 Table 1 (i)(Count, Ne)	-	44500	-
5.1 Table 1 (ii)(Count CV, percent, Max)	-	44500	-
5.1 Table 1 (iii)(CSP, Min)	-	44500	-
5.1 Table 1 (iv)(Lea breaking load CV, Percent, Max)	-	44500	-
5.1Tble 1 (v)(Yarn tenacity, cN/tex, Min)	-	44500	-
5.1 Table 1 (vi)(Breaking elongation, percent, Min)	-	44500	-
5.1 Table 1 (vii)(Yarn tenacity CV percent, Max)	-	44500	-
5.1Table 1 (viii)(Unevenness, percent Max)	-	44500	-
5.1 Table 1 (ix)(Unevenness CV, percent, Max)	-	44500	-
5.1 Table 1 (x)(Hairiness index, Max)	-	44500	-
5.1 Table 1 (xi)(Imperfections/km, Max)	-	44500	-
5.2 Table 2 (i)(Count, Ne)	-	44500	-
5.2 Table 2 (ii)(Count CV, percent, Max)	-	44500	-
5.2 Table 2 (iii)(Twist per meter)	-	44500	-
5.2 Table 2 (iv)(CSP, Min)	-	44500	-
5.2 Table 2 (v)(Lea breaking load CV, Percent, Max)	-	44500	-
5.2 Table 2 (vi)(Yarn tenacity, cN/tex, Min)	-	44500	-
5.2 Table 2(vii)(Yarn tenacity CV, percent, Max)	-	44500	-
5.2 Table 2 (viii)(Breaking elongation percent, Min)	-	44500	-
5.2 Table 2 (ix)(Unevenness, percent Max)	-	44500	-
5.2 Table 2 (x)(Unevenness CV, percent, Max)	-	44500	-
5.2 Table 2 (xi)(Hairiness index, Max)	-	44500	-
5.2 Table 2(xii)(Imperfections/km, Max)	-	44500	-
5.3.2(The average resultant count of the multifold yarn)	-	44500	-
5.3.3(The lea breaking strength of multifold yarn)	-	44500	-
5.3.4(The ply twist in the multifold yarn)	-	44500	-
5.3.6(The requirement for hairiness index)	-	44500	-
7(MARKING)	-	44500	-

25 Feb, 2027

-
Included w.e.f. 01.01.2024

8367

Atmy Analytical Labs Pvt. Ltd., Faridabad

8167506

IS 1363 : Part 3 (2018)

Hexagon Head Bolts, Screws and Nuts of Product Grade ˜C ™ Part 3 (Style 1) Hexagon Nuts ( Size Range M 5 to M 64 ) ( Fifth Revision )

All

17200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3-Table 1(Dimensions-D)	-	17200	-
3-Table 1(Dimensions-P)	-	17200	-
3-Table 1(Dimensions-dw(minimum))	-	17200	-
3-Table 1(Dimensions-e(minimum))	-	17200	-
3-Table 1(Dimensions-m(minimum))	-	17200	-
3-Table 1(Dimensions-m(maximum))	-	17200	-
3-Table 1(Dimensions-mw(minimum))	-	17200	-
3-Table 1(Dimensions-s(minimum))	-	17200	-
3-Table 1(Dimensions-s(maximum))	-	17200	-
3-Table 2(Dimensions-D)	-	17200	-
3-Table 2(Dimensions-P)	-	17200	-
3-Table 2(Dimensions-dw(minimum))	-	17200	-
3-Table 2(Dimensions-e(minimum))	-	17200	-
3-Table 2(Dimensions-m(minimum))	-	17200	-
3-Table 2(Dimensions-m(maximum))	-	17200	-
3-Table 2(Dimensions-mw(minimum))	-	17200	-
3-Table 2(Dimensions-s(minimum))	-	17200	-
4-Table 3(General requirements)	-	17200	-
4-Table 3(Threads-ISO 724 & 965(1))	-	17200	-
4-Table 3(Mechanical property-Property class (ISO 898-1))	-	17200	-
4-Table 3(Mechanical property-Tensile strength (ISO 898-1))	-	17200	-
4-Table 3(Mechanical property-Lower yield strength (ISO 898-1) )	-	17200	-
4-Table 3(Mechanical property-Stress at 0,2 % non-proportional elongation (ISO 898-1))	-	17200	-
4-Table 3(Mechanical property-Stress at 0,0048d non-proportional elongation for full-size fasteners (ISO 898-1))	-	17200	-
4-Table 3(Mechanical property-Stress under proof load (ISO 898-1))	-	17200	-
4-Table 3(Mechanical property-Proof strength ratio (ISO 898-1))	-	17200	-
4-Table 3(Mechanical property-Percentage elongation after fracture for machined test pieces (ISO 898-1))	-	17200	-
4-Table 3(Mechanical property-Percentage reduction of area after fracture for machined test pieces (ISO 898-1))	-	17200	-
4-Table 3(Mechanical property-Elongation after fracture for full-size fasteners (ISO 898-1))	-	17200	-
4-Table 3(Mechanical property-Head soundness (ISO 898-1))	-	17200	-
4-Table 3(Mechanical property-Vickers hardness (ISO 898-1))	-	17200	-
4-Table 3(Mechanical property-Brinell hardness (ISO 898-1))	-	17200	-
4-Table 3(Mechanical property-Rockwell hardness (ISO 898-1) HRB)	-	17200	-
4-Table 3(Mechanical property-Rockwell hardness (ISO 898-1) HRC)	-	17200	-
4-Table 3(Mechanical property-Surface hardness (ISO 898-1))	-	17200	-
4-Table 3(Mechanical property-Non-carburization (ISO 898-1))	-	17200	-
4-Table 3(Mechanical property-Height of non-decarburized thread zone (ISO 898-1))	-	17200	-
4-Table 3(Mechanical property-Depth of complete decarburization in the thread (ISO 898-1))	-	17200	-
4-Table 3(Mechanical property-Reduction of hardness after retempering (ISO 898-1))	-	17200	-
4-Table 3(Mechanical property-Breaking torque (ISO 898-1))	-	17200	-
4-Table 3(Mechanical property-Impact strength (ISO 898-1))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Quench Cracks(ISO 6157-1))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging cracks (ISO 6157-1))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts (ISO 6157-1)- Chamfer Circle)	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts (ISO 6157-1))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts-Hexagon head screw (ISO 6157-1))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts-Circular head screws (ISO 6157-1))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging Bursts-Circular head screws (ISO 6157-1))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts (ISO 6157-1) (Chamfer Circle))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts (ISO 6157-1))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Hexagon head screw (ISO 6157-1))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear Bursts-Circular head screws (ISO 6157-1))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Circular head screws (ISO 6157-1))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Raw material seams and laps (ISO 6157-1))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Voids (ISO 6157-1))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Folds (ISO 6157-1))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Tool marks (ISO 6157-1))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Damages (ISO 6157-1) (Impairs Usability))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Damages (ISO 6157-1))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-- Quench cracks (ISO 6157-3))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks - (ISO 6157-3))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts (ISO 6157-3) Chamfer Circle)	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts-Hexagon head screw (ISO 6157-3))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts-Circular head screws (ISO 6157-3))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts-Circular head screws (ISO 6157-3))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Hexagon head screws-Width (ISO 6157-3))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Hexagon head screws-Depth (ISO 6157-3))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Hexagon head screws (ISO 6157-3))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Hexagon head screws (ISO 6157-3))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Hexagon head screws (ISO 6157-3))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Circular head screws - (ISO 6157-3))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Circular head screws - (ISO 6157-3))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Raw material, seams and laps- (ISO 6157-3))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Voids- (ISO 6157-3))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Folds- (ISO 6157-3))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Tool marks - (ISO 6157-3))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Laps on the thread - (ISO 6157-3))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Laps on the thread - (ISO 6157-3))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Damages - (ISO 6157-3))	-	17200	-
3-Table 2(Dimensions-s(maximum))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts (ISO 6157-3))	-	17200	-

25 Feb, 2027

-
-

8368

Atmy Analytical Labs Pvt. Ltd., Faridabad

8167506

IS 1363 : Part 2 (2018)

Hexagon Head Bolts, Screws and Nuts of Product Grade ‘C’ Part 2 Hexagon Head Screws ( Size Range M 5 to M 64 ) ( Fifth Revision )

all

17200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 5(Designation)	-	17200	-
Cl. 3, Table 1 & 2(Dimensions)	-	17200	-
Cl. 3, Table 1 & 2(Dimensions)	-	17200	-
Cl. 3, Table 1 & 2(Dimensions)	-	17200	-
Cl. 3, Table 1 & 2(Dimensions)	-	17200	-
Cl. 3, Table 1 & 2(Dimensions)	-	17200	-
Cl. 3, Table 1 & 2(Dimensions)	-	17200	-
Cl. 3, Table 1 & 2(Dimensions)	-	17200	-
Cl. 3, Table 1 & 2(Dimensions)	-	17200	-
Cl. 3, Table 1 & 2(Dimensions)	-	17200	-
Cl. 3, Table 1 & 2(Dimensions)	-	17200	-
Cl. 3, Table 1 & 2(Dimensions)	-	17200	-
Cl. 3, Table 1 & 2(Dimensions)	-	17200	-
Cl. 3, Table 1 & 2(Dimensions)	-	17200	-
Cl. 4(General requirements)	-	17200	-
Cl. 4(General requirements)	-	17200	-
Cl. 4(General requirements)	-	17200	-
Cl. 4(General requirements)	-	17200	-
Cl. 4(Thread)	-	17200	-
Cl. 4(Mechanical Properties Ref.IS 1367 (Part 3))	-	17200	-
Cl. 4(Mechanical Properties Ref.IS 1367 (Part 3))	-	17200	-
Cl. 4(Mechanical Properties Ref.IS 1367 (Part 3))	-	17200	-
Cl. 4(Mechanical Properties Ref.IS 1367 (Part 3))	-	17200	-
Cl. 4(Mechanical Properties Ref.IS 1367 (Part 3))	-	17200	-
Cl. 4(Mechanical Properties Ref.IS 1367 (Part 3))	-	17200	-
Cl. 4(Mechanical Properties Ref.IS 1367 (Part 3))	-	17200	-
Cl. 4(Mechanical Properties Ref.IS 1367 (Part 3))	-	17200	-
Cl. 4(Mechanical Properties Ref.IS 1367 (Part 3))	-	17200	-
Cl. 4(Mechanical Properties Ref.IS 1367 (Part 3))	-	17200	-
Cl. 4(Mechanical Properties Ref.IS 1367 (Part 3))	-	17200	-
Cl. 4(Mechanical Properties Ref.IS 1367 (Part 3))	-	17200	-
Cl. 4(Mechanical Properties Ref.IS 1367 (Part 3))	-	17200	-
Cl. 5(Finish - Coating Ref. ISO 4042 & ISO 10683)	-	17200	-

25 Feb, 2027

-
-

8369

Atmy Analytical Labs Pvt. Ltd., Faridabad

8167506

IS 1363 : Part 1 (2019)

Hexagon Head Bolts, Screws and Nuts of Product Grade ‘C’ Part 1 Hexagon Head Bolts ( Size Range M 5 to M 64 ) ( Fifth Revision )

ALL

17200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3-Table 1(Dimensions-d)	-	17200	-
3-Table 1(Dimensions-p)	-	17200	-
3-Table 1(Dimensions-b)	-	17200	-
3-Table 1(Dimensions-c(Maximum))	-	17200	-
3-Table 1(Dimensions-da(Maximum))	-	17200	-
3-Table 1(Dimensions-ds(Minimum))	-	17200	-
3-Table 1(Dimensions-ds(maximum))	-	17200	-
3-Table 1(Dimensions-dw(minimum))	-	17200	-
3-Table 1(Dimensions-e(minimum))	-	17200	-
3-Table 1(Dimensions-k(nominal))	-	17200	-
3-Table 1(Dimensions-k(Minimum))	-	17200	-
3-Table 1(Dimensions-k(maximum))	-	17200	-
3-Table 1(Dimensions-kw(minimum))	-	17200	-
3-Table 1(Dimensions-r(minimum))	-	17200	-
3-Table 1(Dimensions-s(minimum))	-	17200	-
3-Table 1(Dimensions-s(maximum))	-	17200	-
3-Table 1(Dimensions-l(nominal))	-	17200	-
3-Table 1(Dimensions-l(minimum))	-	17200	-
3-Table 1(Dimensions-l(maximum))	-	17200	-
3-Table 1(Dimensions-ls(minimum))	-	17200	-
3-Table 1(Dimensions-lg(maximum))	-	17200	-
3-Table 1(Dimensions-β)	-	17200	-
3-Table 1(Dimensions-u)	-	17200	-
3-Table 2(Dimensions-d)	-	17200	-
3-Table 2(Dimensions-p)	-	17200	-
3-Table 2(Dimensions-b)	-	17200	-
3-Table 2(Dimensions-c(Maximum))	-	17200	-
3-Table 2(Dimensions-da(Maximum))	-	17200	-
3-Table 2(Dimensions-ds(Minimum))	-	17200	-
3-Table 2(Dimensions-ds(maximum))	-	17200	-
3-Table 2(Dimensions-dw(minimum))	-	17200	-
3-Table 2(Dimensions-e(minimum))	-	17200	-
3-Table 2(Dimensions-k(nominal))	-	17200	-
3-Table 2(Dimensions-k(Minimum))	-	17200	-
3-Table 2(Dimensions-k(maximum))	-	17200	-
3-Table 2(Dimensions-kw(minimum))	-	17200	-
3-Table 2(Dimensions-r(minimum))	-	17200	-
3-Table 2(Dimensions-s(minimum))	-	17200	-
3-Table 2(Dimensions-s(maximum))	-	17200	-
3-Table 2(Dimensions-l(nominal))	-	17200	-
3-Table 2(Dimensions-l(minimum))	-	17200	-
3-Table 2(Dimensions-l(maximum))	-	17200	-
3-Table 2(Dimensions-ls(minimum))	-	17200	-
3-Table 2(Dimensions-lg(maximum))	-	17200	-
3-Table 2(Dimensions-β)	-	17200	-
3-Table 2(Dimensions-u)	-	17200	-
4-Table 3(General requirements-ISO 8992)	-	17200	-
4-Table 3(Threads-ISO 724 & 965(1))	-	17200	-
4-Table 3(Mechanical property-Property class (ISO 898-1))	-	17200	-
4-Table 3(Mechanical property-Tensile strength (ISO 898-1))	-	17200	-
4-Table 3(Mechanical property-Lower yield strength (ISO 898-1) )	-	17200	-
4-Table 3(Mechanical property-Stress at 0,2 % non-proportional elongation (ISO 898-1))	-	17200	-
4-Table 3(Mechanical property-Stress at 0,0048d non-proportional elongation for full-size fasteners (ISO 898-1))	-	17200	-
4-Table 3(Mechanical property-Stress under proof load (ISO 898-1))	-	17200	-
4-Table 3(Mechanical property-Proof strength ratio (ISO 898-1))	-	17200	-
4-Table 3(Mechanical property-Percentage elongation after fracture for machined test pieces (ISO 898-1))	-	17200	-
4-Table 3(Mechanical property-Percentage reduction of area after fracture for machined test pieces (ISO 898-1))	-	17200	-
4-Table 3(Mechanical property-Elongation after fracture for full-size fasteners (ISO 898-1))	-	17200	-
4-Table 3(Mechanical property-Head soundness (ISO 898-1))	-	17200	-
4-Table 3(Mechanical property-Vickers hardness (ISO 898-1))	-	17200	-
4-Table 3(Mechanical property-Brinell hardness (ISO 898-1))	-	17200	-
4-Table 3(Mechanical property-Rockwell hardness (ISO 898-1))	-	17200	-
4-Table 3(Mechanical property-Rockwell hardness (ISO 898-1))	-	17200	-
4-Table 3(Mechanical property-Surface hardness (ISO 898-1))	-	17200	-
4-Table 3(Mechanical property-Non-carburization (ISO 898-1))	-	17200	-
4-Table 3(Mechanical property-Height of non-decarburized thread zone (ISO 898-1))	-	17200	-
4-Table 3(Mechanical property-Depth of complete decarburization in the thread (ISO 898-1))	-	17200	-
4-Table 3(Mechanical property-Reduction of hardness after retempering (ISO 898-1))	-	17200	-
4-Table 3(Mechanical property-Breaking torque (ISO 898-1))	-	17200	-
4-Table 3(Mechanical property-Impact strength (ISO 898-1))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Quench Cracks(ISO 6157-1))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging cracks (ISO 6157-1))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts (ISO 6157-1))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts (ISO 6157-1))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts-Hexagon head screw (ISO 6157-1))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts-Circular head screws (ISO 6157-1))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts-Circular head screws (ISO 6157-1))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts (ISO 6157-1))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts (ISO 6157-1))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Hexagon head screw (ISO 6157-1))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Circular head screws (ISO 6157-1))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Circular head screws (ISO 6157-1))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Raw material seams and laps (ISO 6157-1))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Voids (ISO 6157-1))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Folds (ISO 6157-1))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Tool marks (ISO 6157-1))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Damages (ISO 6157-1))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Damages (ISO 6157-1))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-- Quench cracks (ISO 6157-3))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks - (ISO 6157-3))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts (ISO 6157-3))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts (ISO 6157-3))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts-Hexagon head screw (ISO 6157-3))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts-Circular head screws (ISO 6157-3))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts-Circular head screws (ISO 6157-3))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Hexagon head screws-Width (ISO 6157-3))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Hexagon head screws-Depth (ISO 6157-3))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Hexagon head screws (ISO 6157-3))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Hexagon head screws (ISO 6157-3))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Hexagon head screws (ISO 6157-3))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Circular head screws - (ISO 6157-3))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Circular head screws - (ISO 6157-3))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Raw material, seams and laps- (ISO 6157-3))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Voids- (ISO 6157-3))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Folds- (ISO 6157-3))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Tool marks - (ISO 6157-3))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Laps on the thread - (ISO 6157-3))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Laps on the thread - (ISO 6157-3))	-	17200	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Damages - (ISO 6157-3))	-	17200	-

25 Feb, 2027

-
-

8370

Atmy Analytical Labs Pvt. Ltd., Faridabad

8167506

IS 5295 (2023)

Ethylene Glycol - Specification (Third Revision)

ALL

21000 View breakup
For General grade Rs. 14900/- For Fibre grade Rs. 21000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1("Description IS 5295 : 2023 ")	-	500	Complete Testing Charges
4.2Table 1 (i)("Colour IS 5295 : 2023 ")	-	0	Complete Testing Charges
4.2Table 1 (ii)("Relative density at 20 °C/20 °C (IS 1448 (Part 167)")	-	0	Complete Testing Charges
4.2Table 1 (iii)("Distillation range at 760 mmHg IS 5298")	-	0	Complete Testing Charges
4.2Table 1 (iii)(a) Initial boiling point)	-	0	Complete Testing Charges
4.2Table 1 (iii)(b) The temperature at which 95 ml of material shall distil)	-	0	Complete Testing Charges
4.2Table 1 (iv)("Moisture content 1448 (Part 175) / 1448(Part 182) ")	-	0	Complete Testing Charges
4.2Table 1 (v)("Acidity (as acetic acid) IS 5295 : 2023 ")	-	0	Complete Testing Charges
4.2Table 1 (vi)("Ultra-Violet transmittance in 1 cm cell at IS 5295 : 2023 ")	-	0	Complete Testing Charges
4.2Table 1 (vi)(a) 220 nm)	-	0	Complete Testing Charges
4.2Table 1 (vi)(b) 275 nm)	-	0	Complete Testing Charges
4.2Table 1 (vi)(c) 350 nm)	-	0	Complete Testing Charges
4.2Table 1 (vii)("Freezing point of equal volumes of material and water IS 5295 : 2023 ")	-	0	Complete Testing Charges
4.2Table 1 (viii)("Iron content IS 5295 : 2023 ")	-	0	Complete Testing Charges
4.2Table 1 (ix)("Chlorides content IS 5295 : 2023 ")	-	0	Complete Testing Charges
4.2Table 1 (x)("Purity IS 5295 : 2023 ")	-	0	Complete Testing Charges
4.2Table 1 (xi)("Diethylene glycol content IS 5295 : 2023 ")	-	0	Complete Testing Charges
4.2Table 1 (xii)("Aldehyde (as HCHO) IS 5295 : 2023 ")	-	0	Complete Testing Charges
4.1(Material shall be colourless)	-	0	Complete Testing Charges
4.2-Table 1-i)(Colour, Pt-Co, Max)	-	2000	Complete Testing Charges
4.2-Table 1-ii)(Relative density1) at 20 °C/20 °C)	-	1500	Complete Testing Charges
4.2-Table 1-iii)(Distillation range at 760 mmHg: a) Initial boiling point, °C Min b) The temperature at which 95 ml of material shall distil, °C, Max)	-	2500	Complete Testing Charges
4.2-Table 1-iv)(Moisture content, percent by mass, Max)	-	1500	Complete Testing Charges
4.2-Table 1-v)(Acidity (as acetic acid), ppm, Max)	-	2500	Complete Testing Charges
4.2-Table 1-vi)(Ultra-Violet transmittance in 1 cm cell at a) 220 nm, Min b) 275 nm, Min c) 350 nm, Min )	-	4000	Complete Testing Charges
4.2-Table 1-vii)(Freezing point of equal volumes of material and water, Max)	-	2500	Complete Testing Charges
4.2-Table 1-viii)(Iron content, ppm, Max)	-	2500	Complete Testing Charges
4.2-Table 1-ix)(Chlorides content (as Cl), ppm, Max)	-	2000	Complete Testing Charges
4.2-Table 1-x)(Purity, percent, Min)	-	2500	Complete Testing Charges
4.2-Table 1-xi)(Diethylene glycol content, ppm, Max)	-	2500	Complete Testing Charges
4.2-Table 1-xii)(Aldehyde (as HCHO), ppm, Max)	-	2500	Complete Testing Charges
6.1(Packing)	-	500	Complete Testing Charges
6.2(Marking)	-	1000	Complete Testing Charges

25 Feb, 2027

-
Revised version of IS 5295:2023 included w.e.f. 30.11.2023

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number