BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

11365 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

8671

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 9585 (2021)

Lactometers - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. No. 11.2 (Check test)	-

-
Excluding Chemical-test facility available for cl.11

8672

CIPET: CENTRE FOR SKILLING AND TECHNICAL SUPPORT (CSTS) - AURANGABAD

7123534

IS 15532 (2004)

Plastics crates for fruits and vegetables - Specification

11250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Material)	-	2000	-
3.3(Shape, Dimensions and Design)	-	500	-
3.4(Mass)	-	250	-
3.5(Appearance and Surface Finish)	-	300	-
3.6(Dimensional Stability)	-	700	-
3.7(Confluence Line Strength)	-	1100	-
3.8.1(Compressive Strength (Resistance to Applied Load))	-	1100	-
3.8.2(Resistance to Drop)	-	1100	-
3.9(Resistance to Environmental Stress Cracking)	-	1200	-
3.10.1(Suspension Test)	-	2200	-
3.10.2(Free-Fall Test)	-	0	INCLUDED IN SUSPENSION TEST

31 Dec, 2026

-
-

8673

Karandikar Laboratories Pvt. Ltd.

7121526

IS/IEC 60079 : PART 11 (2011)

Explosive atmospheres : Part 11 Equipment protection by intrinsic safety I""""

200000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.3 Table 5, Table F.1 & Table F.2(Dimension measurement (mm))	-	5000	-
10.2(Temperature ( °C ))	-	15000	-
10.3(Leakage current ( mA ))	-	5000	-
10.5(Temperature ( °C ))	-	68000	-
10.6(Verification)	-	20000	-
10.7(Verification)	-	15000	-
10.9(Verification)	-	15000	-
10.1(Temperature ( °C ))	-	35000	-
10.11(Verification)	-	15000	-
10.12(Verification)	-	15000	-

04 Mar, 2028

-
-

8674

National council for cement and building materials (testing laboratories)

9102335

IS 8043 (1991)

Specification for hydrophobic Portland cement

Hydrophobic Portland Cement

32110 View breakup
Rs.32110/- (excluding transverse strength), Rs.43880/- (including transverse strength)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1 (ref. 6 - Table - 1 i of IS 269:2015)(Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-	10490	-
5.1 (ref. 6 - Table - 1 ii of IS 269:2015)(Ratio of percentage of alumina to that of iron oxide - Cl 4 of IS 4032:1985)	-	4450	-
5.1 (ref. 6 - Table - 1 iii of IS 269:2015)(Insoluble residue - Cl 4.10 of IS 4032:1985)	-	1940	-
5.1 (ref. 6 - Table - 1 iv of IS 269:2015)(Magnesia - Cl 4.8 of IS 4032:1985)	-	2510	-
5.1 (ref. 6 - Table - 1 v of IS 269:2015)(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	1940	-
5.1 (ref. 6 - Table - 1 vi of IS 269:2015)(Loss on ignition - Cl 4.2 of IS 4032:1985)	-	970	-
5.1 (ref. 6 - Table - 1 vii of IS 269:2015)(Chloride content - Cl 4.13 of IS 4032:1985)	-	1940	-
5.1 (ref. 6 - Table - 1 viii of IS 269:2015)( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	1610	-
6.1(Fineness 4031 Part 2)	-	1610	-
6.2(Expansion by Le Chatelier- IS 269 & 4031 Part 3)	-	1610	-
6.2(Expansion after aeration - IS 269 & 4031 Part 3)	-	1610	-
6.2(Expansion by Autoclave- IS 269 & 4031 Part 3)	-	2900	-
6.2(Expansion after aeration- IS 269 & 4031 Part 3)	-	2900	-
6.2(Setting Time Initial- IS 269 & 4031 Part 5)	-	725	-
6.2(Setting Time Final- IS 269 & 4031 Part 5)	-	725	-
6.3 a)(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1650	-
6.3 b)(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1870	-
6.3 c)(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	2200	-
6.6(Hydrophobicity- Annex B)	-	970	-

15 May, 2027

-
-

8675

Conformity Testing Labs Pvt. Ltd. Unit 2

8139626

IS 16221 : Part 2 (2015)

Safety of power converters for use in photovoltaic power systems: Part 2 particular requirements for inverters

350000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	135000	10& DISCOUNT FOR BIS
5(Marking and documentation)	-	10000	10& DISCOUNT FOR BIS
6(Environmental requirements and conditions)	-	10000	10& DISCOUNT FOR BIS
7(Protection against electric shock and energy hazards)	-	30000	10& DISCOUNT FOR BIS
8(Protection against Mechanical Hazards)	-	10000	10& DISCOUNT FOR BIS
9(Protection against Fire Hazards)	-	10000	10& DISCOUNT FOR BIS
10(Protection against Sonic Pressure Hazards)	-	20000	10& DISCOUNT FOR BIS
11(Protection against Liquid Hazards)	-	10000	10& DISCOUNT FOR BIS
12(Protection against Chemical Hazards)	-	10000	10& DISCOUNT FOR BIS
13(Physical Requirements)	-	20000	10& DISCOUNT FOR BIS
6.4(UV exposure)	-	10000	10& DISCOUNT FOR BIS
Clause No. 4.3(Thermal testing)	-	30000	10& DISCOUNT FOR BIS
Clause No. 4.4(Testing in single fault condition)	-	30000	10& DISCOUNT FOR BIS
4.5(Humidity preconditioning)	-	25000	10& DISCOUNT FOR BIS
4.6(Backfeed voltage protection)	-	20000	10& DISCOUNT FOR BIS
4.7(Electrical rating tests)	-	10000	10& DISCOUNT FOR BIS
4.8(Additional tests for grid interactive inverters)	-	20000	10& DISCOUNT FOR BIS

05 Apr, 2027

-
Included w.e.f. 1-10-2021. Exclusions: UV resistance (Cl.13.6.4), Component (Cl.14)

8676

Conformity Testing Labs Pvt. Ltd. Unit 2

8139626

IS 2993 (1998)

A.C. motor capacitors (Second Revision)

420000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.6(Visual Examination)	-	5000	10% Discount Offred to BIS
2.1(Check of dimensions)	-	5000	10% Discount Offred to BIS
2.9(Capacitance measurement)	-	10000	10% Discount Offred to BIS
2.11.1(Robustness of terminations)	-	5000	10% Discount Offred to BIS
2.11.1.1(Tensile)	-	5000	10% Discount Offred to BIS
2.11.1.2(Bending (half cf the terminations))	-	5000	10% Discount Offred to BIS
2.11 .1.3(Torsion (other half of the terminations))	-	5000	10% Discount Offred to BIS
2.11.1.5(Visual Examination)	-	5000	10% Discount Offred to BIS
2.11.2(Soldering)	-	5000	10% Discount Offred to BIS
2.11.3(Vibration)	-	10000	10% Discount Offred to BIS
2.11.4(fixing bolt or stud (if fitted))	-	5000	10% Discount Offred to BIS
2.12(Sealing Test)	-	15000	10% Discount Offred to BIS
2.13(Endurance test)	-	20000	10% Discount Offred to BIS
2.13.1(Endurance test :Testing in air with forced circulation)	-	20000	-
2.13.3(Endurance test : Conditions of compliance)	-	5000	10% Discount Offred to BIS
2.14(Damping heat test)	-	57000	10% Discount Offred to BIS
2.7(Voltage test between terminals)	-	10000	10% Discount Offred to BIS
2.8(Voltage test between terminals and case)	-	10000	10% Discount Offred to BIS
2.15(Self-healing test (if applicable))	-	72000	10% Discount Offred to BIS
2.16.3(Destruction test : Test procedure)	-	30000	10% Discount Offred to BIS
2.16.3.1(Destruction test : Test procedure - Preparation and pre-conditioning )	-	20000	10% Discount Offred to BIS
2.16.3.2(Destruction test : Test procedure : DC conditioning)	-	20000	10% Discount Offred to BIS
2.16.3.3(Destruction test : Test procedure : AC destruction test)	-	30000	10% Discount Offred to BIS
2.5(Tangent of loss angle)	-	5000	10% Discount Offred to BIS
2.16.4(Destruction tes: Evaluation of the failure )	-	50000	10% Discount Offred to BIS
2.10(Check of dimensions)	-	5000	10% Discount Offred to BIS
4.1(Creepage distances and clearances)	-	5000	10% Discount Offred to BIS
4.2(Terminals and connecting cables)	-	2000	10% Discount Offred to BIS
4.3(Earth connections)	-	2000	10% Discount Offred to BIS
4.4(Discharge devices)	-	5000	10% Discount Offred to BIS

05 Apr, 2027

-
-

8677

Envirocare Labs Pvt Ltd

7120616

IS 15757 (2007)

Follow-up formula - Complementary foods - Specification

27186 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause no 4(Description)	-	64	-
Clause no 5.1(Freedom from extraneous matter)	-	150	-
Cl 5.7(Flavour and Odour)	-	86	-
5.8.1 (Bacterial Count )	-	172	-
5.8.2 (Coliform Count )	-	172	-
5.8.3 (Escherichia Coli )	-	172	-
5.8.4 (Staphylococcus Aureus )	-	172	-
5.8.5 (Salmonella and Shigella )	-	645	-
5.8.6 (Yeast and Mould Count )	-	236	-
Table 1 (i)(Moisture)	-	129	-
Table 1 (ii)(Total milk protein)	-	236	-
Table 1 (iii)(Total fat)	-	172	-
Table 1 (iii)(Linoleate)	-	860	-
Table 1 (iv)(Total ash (Annex B of IS 14433))	-	129	-
Table 1 (v)(Acid insoluble ash (Annex B of IS 14433))	-	258	-
Table 1 (vi)(Solubility: Solubility index (IS 12759) )	-	194	-
Table 1 (vii)(VitaminA (as retinol) (IS 5886))	-	323	-
Table 1 (viii)(Iron (AnnexD of IS 14433 ))	-	237	-
Table 1 (ix)(Added vitamin D (IS 5835))	-	1720	-
Table 1 (x)(Thiamine (IS 5398))	-	860	-
Table 1 (xi)(Riboflavin (IS 5399))	-	860	-
Table 1 (xii)(Niacin (IS 5400))	-	860	-
Table 1 (xiii)(VitaminB6 (pyridoxine) (IS 7530))	-	860	-
Table 1 (xiv)(Folic acid (IS 7234 ))	-	1505	-
Table 1 (xv)(Pantothenic acid (IS 9840))	-	1075	-
Table 1 (xvi)(VitaminB12 (IS 7529 ))	-	1935	-
Table 1 (xvii)(Biotin (IS 9820))	-	1505	-
Table 1 (xviii)(Vitamin C (IS 5838))	-	237	-
Table 1 (xix)(VitaminE (IS 7235))	-	860	-
Table 1 (xx)(VitaminK (IS 7235))	-	860	-
Table 1 (xxii)(Sodium (IS 12760))	-	237	-
Table 1 (xxiii)(Potassium (IS 12760))	-	237	-
Table 1 (xxiv)(Chloride (IS 11763 ))	-	237	-
Table 1 (xxv)(Calcium (IS 5949))	-	237	-
Table 1 (xxvi)(Phosphorus (IS 12756))	-	237	-
Table 1 (xxvii)(Magnesium (IS 5949))	-	237	-
Table 1 (xxviii)(Iodine (ClauseA·2 of IS1224))	-	237	-
Table 1 (xxix)( Copper (Clause 15 of IS 1699))	-	237	-
Table 1 (xxx)(Zinc (Clause 15 of IS 1699))	-	237	-
Table 1 (xxxi)(Manganese (Clause 35 of IS 3025))	-	237	-
Table 1 (xxxii)(Selenium (Clause 35 of IS 3025))	-	237	-
Table 1 (xxxiii)(Heavy metals: a) Lead (IS 12074))	-	237	-
Table 1 (xxxiii)(Heavy metals: b) Arsenic (IS 11124))	-	237	-
Table 1 (xxxiii)(Heavy metals: c) Tin (Clause 17 of IS 2860))	-	237	-
Table 1 (xxxiii)(Heavy metals: d)Cadmium (Clause 15 of IS 1699))	-	237	-
5.10.1.7(pesticide residue)	-	4300	-
5.10.2.4(Aflatoxin B1)	-	1290	-

25 May, 2027

-
-

8678

NATIONAL TEST HOUSE(SOUTHERN REGION)

6122704

IS 513 : Part 2 (2016)

Cold reduced carbon steel sheet and strip: Part 2 high tensile and multi - Phase steel (Sixth Revision)

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 9(Workmanship)	-	1000	-
Cl 7(UTM)	-	3000	-
Cl. 7.2 Table 7(Bend Test)	-	1000	-
Cl 10(Length, Width & Thickness)	-	1000	-
Cl. 7.3 Table 4A & 4B(Tensile Strain Hardening)	-	3000	Additional Charges
Cl. 8.5.3 Table 6(Surface Roughness)	-	1000	Additional Charges

28 Nov, 2025

-
-

8679

Envirocare Labs Pvt Ltd

7120616

IS 14542 (1998)

Partly skimmed milk powder specification

Type I, Type II

3200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 6.6.1(Bacterial Count (IS 5402))	-	400		-
Cl 6.6.2(Coliform Count ((IS 5402))	-	400		-

25 May, 2027

-
-

8680

Envirocare Labs Pvt Ltd

7120616

IS 14433 (2007)

Infant milk substitutes - Specification (First Revision)

Type I, Type II, Type III

27047 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Description)	-	65	-
Clause no 6.1(freedom from extraneous matter)	-	65	-
6.3(Flavour taste and odour)	-	65	-
6.4(Scorched particles)	-	130	-
6.5(Linoleate)	-	1300	-
6.9.1(Bacterial count)	-	260	-
6.9.2(Coliform count)	-	260	-
6.9.3(Escherichia coli)	-	260	-
6.9.4(Staphylococcus Aureus)	-	260	-
6.9.5(Salmonella and shigella)	-	650	-
6.9.6(Yeast and mould count)	-	358	-
6.1(Moisture)	-	195	-
6.1(Milk protein)	-	358	-
6.1(Milk fat)	-	260	-
6.1(Total fat)	-	260	-
6.1(Total ash)	-	195	-
6.1(Acid insoluble ash)	-	260	-
6.1(Solubility)	-	293	-
6.1(Vitamin A (as Retinol))	-	488	-
6.1(Iron)	-	358	-
6.10 Table 1 (ix) a)(Lead)	-	358	-
6.10 Table 1 (ix) b)(Arsenic)	-	358	-
6.10 Table 1 (ix) c)(Tin)	-	325	-
6.10 Table 1 (ix) d)(Cadmium)	-	358	-
6.1(Added Vitamin D (expressed as chole-calciferol))	-	1300	-
6.1(Thiamin)	-	650	-
6.1(Niacin)	-	650	-
6.1(Riboflavin)	-	1300	-
6.1(Vitamin B6)	-	1300	-
6.1(Vitamin B12)	-	2600	-
6.1(Folic acid)	-	1339	-
6.1(Pentothenic acid)	-	1495	-
6.1(Biotin )	-	2080	-
6.1(Vitamin C)	-	358	-
6.1(Vitamin K)	-	1300	-
6.1(Calcium)	-	260	-
6.1(Phosphorus)	-	260	-
6.1(Iodine)	-	358	-
6.1(Copper)	-	358	-
6.1(Manganese)	-	358	-
6.1(Zinc)	-	358	-
6.1(Sodium)	-	358	-
6.1(Potassium)	-	358	-
6.1(Chloride)	-	260	-
6.1(Magnesium)	-	358	-
6.1(Selenium)	-	358	-
6.1(Vitamin E ( as alpha tocopherol compounds))	-	1300	-

25 May, 2027

-
-

8681

Customer Services & Development Center, HPCL-Mittal Energy Limited

8171106

IS 7328 (2020)

Specification for Polyethylene Material for Moulding and Extrusion ( Third Revision )

Polyethylene

1500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.1.1(Density)	-	1500	The test charge is in INR and for one sample
5.2.1.2(MFI)	-	1500	The test charge is in INR and for one sample
5.3.2 Table 6 IS 13360 (Part 5/Sec1)(Tensile strength at yield)	-	2000	The test charge is in INR and for one sample
5.3.2 Table 6 IS 13360 (Part 5/Sec1)(Elongation at yield)	-	2000	The test charge is in INR and for one sample
5.3.2 Table 6 IS 13360 (Part 5/Sec1)(Tensile strength at break)	-	2000	The test charge is in INR and for one sample
5.3.2 Table 6 IS 13360 (Part 5/Sec1)(Elongation at break)	-	2000	The test charge is in INR and for one sample
5.3.2 Table 6 IS 13360 (Part 5/Sec7)(Flexural modulas)	-	2000	The test charge is in INR and for one sample
5.3.2 Table 6 IS 13360 (Part 5/Sec4)(Izod/Charpy impact strength)	-	2000	The test charge is in INR and for one sample
5.3.2 Table 6 IS 13360 (Part 5/Sec11)(Shore Aor D hardness)	-	1500	The test charge is in INR and for one sample
5.3.2 Table 6 IS 13360 (Part 11/Sec1)(Coeffiicient of friction)	-	1500	The test charge is in INR and for one sample
5.3.2 Table 6 IS 13360 (Part 6/Sec3)(Heat deflection temperature)	-	2000	The test charge is in INR and for one sample
5.3.2 Table 6 IS 13360 (Part 6/Sec1)(Vicat softening temperature)	-	2000	The test charge is in INR and for one sample
Annex B of IS 4984 5.3.2 Table6(Oxidation induction time)	-	4000	The test charge is in INR and for one sample
4 of IS 7016 (part 8)(Oven ageing)	-	1800	The test charge is in INR for 24 hrs
IS 13360(part 9/Sec7)(Specular gloss)	-	1500	The test charge is in INR and for one sample
IS 13360(part 9/Sec5)(Haze or luminious transmittance)	-	1500	The test charge is in INR and for one sample
IS 13360(part 9/Sec9)/ASTME313(Yellowness index or whiteness index)	-	1500	The test charge is in INR and for one sample
5.3.2 Table 6 IS 13360 (Part 5/Sec23)(Tear Strength)	-	2000	The test charge is in INR and for one sample
5.3.2 Table 6 IS 13360 (Part 5/Sec6)(Dart Impact strength)	-	2000	The test charge is in INR and for one sample

28 Jul, 2028

-
Scope may be restricted as 'For polymer resin only'

8682

Envirocare Labs Pvt Ltd

7120616

IS 1009 (1979)

Specification for maida for General Purposes (Second Revision)

III

3450 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 3.1(Description)	-	100	-
Clause 3.2(Microscopic Apperance)	-	100	-
Clause 3.3 Table 1(Moisture)	-	300	-
Clause 3.3 Table 1(Total Ash)	-	400	-
Clause 3.3 Table 1(Acid Insoluble ash)	-	650	-
Clause 3.3 Table 1(Gluten)	-	750	-
Clause 3.3 Table 1(Alcoholic acidity)	-	400	-
Clause 3.3 Table 2(Granularity)	-	200	-
Clause 3.3 Table 3(Uric acid)	-	550	-

25 May, 2027

-
-

8683

Conformity Testing Labs Pvt. Ltd. Unit 2

8139626

IS 16221 : Part 1 (2016)

Safety of Power Converters for use in Photovoltaic Power Systems Part 1 General Requirements

750000 View breakup
UPS/Invertors upto 10 KVA- Rs. 5,50,000/- UPS/Invertors above 10 KVA and < 20 KVA- Rs. 7,50,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
15(Software and firmware performing safety functions)	-	2000	10% discount for BIS
13(Physical requirements)	-	30000	10% discount for BIS
12(Chemical hazards)	-	15000	10% discount for BIS
11(Protection against liquid hazards)	-	15000	10% discount for BIS
10(Protection against Sonic Pressure hazards)	-	30000	10% discount for BIS
9(Protection Against Fire Hazards)	-	20000	10% discount for BIS
8(Protection Against mechanical Hazards)	-	20000	10% discount for BIS
7(Protection against electric shock and energy hazards)	-	40000	10% discount for BIS
6(Environmental Requirements and conditions)	-	20000	10% discount for BIS
5(Marking and documentation)	-	15000	10% discount for BIS
4(General testing requirements)	-	200000	10% discount for BIS
6.4(UV exposure)	-	15000	10% discount for BIS
9.1.4.3(Hot flaming oil test)	-	10000	10% discount for BIS
4.2(Thermal testing)	-	30000	10% discount for BIS
4.4(Testing in single fault condition)	-	60000	10% discount for BIS
4.5(Humidity preconditioning)	-	20000	10% discount for BIS
4.6(Backfeed voltage protection)	-	40000	10% discount for BIS
4.7(Electrical rating tests)	-	60000	10% discount for BIS

05 Apr, 2027

-
Included w.e.f. 1-10-2021. Exclusions: UV resistance (Cl.13.6.4), Component (Cl.14)

8684

BIS, Southern Regional Laboratory (SRL)

None

IS 2556 : Part 16 (2002)

Vitreous sanitary appliances (Vitreous China) - Specification: Part 16 specific requirements of wash down wall mounted water closets

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
"3 IS 2556(P1)" (GENERAL REQUIREMENTS)	-
"5 Table 1 & 2 " (DIMENSIONS AND TOLERANCES)	-
7 (FINISH)	-
6.1 (CONSTRUCTION)	-
8.1 ()	-
8.2 (Smudge Test)	-
8.3 (Holding Capacity Test)	-
8.4 (Single Ball Test)	-
9 (LOAD TEST)	-
4 (PATTERNS)	-
Clause 3 and Clause 9.5 of IS 2556 (Part 1) (Chemical resistance)	-

-
2 Nos. Advised wooden packing to avoid damage during transit.

8685

NATIONAL TEST HOUSE(SOUTHERN REGION)

6122704

IS 277 (2018)

Galvanized steel strips and sheets (Plain And Corrugated) - Specification (Seventh Revision)

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8.1(UTM)	-	3000	-
Cl 8.2(Press)	-	1000	-
Cl 14(Length, Width & Thickness)	-	1000	-
7.1 & 10.2(Mass of Coating: Single Spot Test)	-	1000	-
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	1000	-

28 Nov, 2025

-
-

8686

Ace Test Labs & Metrology Pvt. Ltd.

9162826

IS 17570 : Part 1 (2021)

Air Filters for general ventilation Part 1 Technical specifications requirements and classification system based upon particulate matter efficiency ePM Adoption of ISO 16890-1:2016

130000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CLAUSE 5.2(Filter Material)	-	35000	-
CLAUSE 5.4(Resistance to air flow)	-	60000	-
CLAUSE 5.6(Arrestance)	-	60000	-
CLAUSE 7(Efficiency test)	-	60000	-

14 Nov, 2027

-
-

8687

BIS, Central Laboratory (CL)

None

IS 9585 (2021)

Lactometers - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 3 (SIZE)	-
Cl 4.1 (FORM)	-
Cl 4.2 (FORM)	-
Cl 4.3 (FORM)	-
Cl 5.1 (MATERIAL OF CONSTRUCTION)	-
Cl 5.2 (MATERIAL OF CONSTRUCTION)	-
Cl 5.3 (MATERIAL OF CONSTRUCTION)	-
Cl 6.1 (WORKMANSHIP)	-
Cl 6.2 (WORKMANSHIP)	-
Cl 6.3 (WORKMANSHIP)	-
Cl 6.4 (WORKMANSHIP)	-
Cl 6.5 (WORKMANSHIP)	-
Cl 6.6 (WORKMANSHIP)	-
Cl 7 (Table-1 and Fig. 1) (DIMENSIONS)	-
Cl 7 (Table-1 and Fig. 1) (DIMENSIONS)	-
Cl 7 (Table-1 and Fig. 1) (DIMENSIONS)	-
Cl 7 (Table-1 and Fig. 1) (DIMENSIONS)	-
Cl 7 (Table-1 and Fig. 1) (DIMENSIONS)	-
Cl 7 (Table-1 and Fig. 1) (DIMENSIONS)	-
Cl 7 (Table-1 and Fig. 1) (DIMENSIONS)	-
Cl 7 (Table-1 and Fig. 1) (DIMENSIONS)	-
Cl 7 (Table-1 and Fig. 1) (DIMENSIONS)	-
Cl 7 (Table-1 and Fig. 1) (DIMENSIONS)	-
Cl 7 (Table-1 and Fig. 1) (DIMENSIONS)	-
Cl 7 (Table-1 and Fig. 1) (DIMENSIONS)	-
Cl 8.1 (SCALE)	-
Cl 8.3 (SCALE)	-
Cl 8.3 (SCALE)	-
Cl 8.3 (SCALE)	-
Cl 8.4 (SCALE)	-
Cl 8.4 (SCALE)	-
Cl 8.5 (SCALE)	-
Cl 8.6 (SCALE)	-
Cl 8.7 (SCALE)	-
Cl 9 (REFERENCE MARK)	-
Cl 9 (REFERENCE MARK)	-
Cl 10.1 (INSCRIPTIONS)	-
Cl 10.1.1 (INSCRIPTIONS)	-
Cl 12.1 (LACTOMETER JARS)	-
Cl 12.1 (LACTOMETER JARS)	-
Cl 12.1 (LACTOMETER JARS)	-
Cl 12.2 (LACTOMETER JARS)	-
Cl 13 (THERMOMETER)	-
Cl 13 (THERMOMETER)	-
Cl 13 (THERMOMETER)	-
Cl 13 (THERMOMETER)	-
Cl 13 (THERMOMETER)	-
Cl 13 (THERMOMETER)	-

-
-

8688

BIS, Central Laboratory (CL)

None

IS 15834 (2020)

Stainless Steel Sliding Door Bolts ( Aldrops ) for Use With Padlocks - Specification ( First Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5 (DIMENSIONS AND TOLERANCES)	-
Cl 5 (DIMENSIONS AND TOLERANCES)	-
Cl 5 (DIMENSIONS AND TOLERANCES)	-
Cl 5 (DIMENSIONS AND TOLERANCES)	-
Cl 5 (DIMENSIONS AND TOLERANCES)	-
6 (MANUFACTURE)	-
7 (FINISH)	-
Cl.4 (Carbon)	-
Cl.4 (Sulphur)	-
Cl.4 (Phosphorus)	-
Cl.4 (Manganese)	-
Cl.4 (Silicon)	-
Cl.4 (Nickel)	-
Cl.4 (Chromium)	-
Cl.4 (Copper)	-
Cl.4 (Molybdenum)	-
Cl.4 (Nitrogen)	-
Cl.4 (Titanium)	-
Cl.4 (Niobium)	-

-
Material Grade/ designation as per relevant IS may please be declared. Sample dia > 3mm or thickness > 0.8 mm can only be tested

8689

BIS, Central Laboratory (CL)

None

IS 5342 (1996)

Ascorbic acid, food grade - Specification (First Revision)

6716.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.4 table 1 (Sulphated ash)	-
4.4 table 1 (Loss on drying over sulphuric acid for 24 hours)	-
4.3 (pH)	-
4.4 table 1 (Arsenic)	-
4.4 table 1 (Heavy metals)	-
3 (Description)	-
4.4 table 1 (Purity as C6H8O6)	-
4.1.1 (Identification test)	-

-
500 gm x 3 Excluding 1- Purity 2-Loss on drying;

8690

BIS, Central Laboratory (CL)

None

IS 1084 (2005)

Textiles – Manila ropes – Specification (fifth revision)

Rs. 7218/- excluding Lubrication. View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 Table 1 to 3 (Manila Fibre )	-
6.2 Table 1 to 3 (Yarn )	-
6.3 (Strand )	-
6.4 (Ropes The ropes shall be well-laid and free from defects and each coil shall be continuous throughout its length and shall not contain loose ends, splices or joints in the strands or in the rope. The number of strands in the rope and the lay of rope, unless otherwise specified, shall be as in next colum:)	-
8.1 IS 7071 (Part 2) (Mass of the Coil The net mass of the coil shall be determined in accordance with IS 7071 (Part 2). The difference between the observed mass and the calculated value of mass obtained by multiplying nominal linear density of the rope with the length of rope in the coil shall be within limits specified below: Reference No. of Rope)	-
8.2 IS 7071 (Parts 1 to 3) (Pitch The pitch of rope, when determined in accordance with IS 7071 (Parts 1 to 3) shall conform to the following requirements: Type of Rope: Pitch :)	-
8.3 IS 7071 (Parts 1 to 3) (Length of Coil The length of each coil when tested as per IS 7071 (Parts 1 to 3) shall not be less than 220 m or as declared. However, if so agreed between the buyer and the seller, the length of coil may be tested under zero tension and ± 5 percent tolerance shall be applicable for the rope with diameters less than or equal to 14 and ± 3 percent with a diameter greater than 14 on the specified/declared length.)	-
8.4 (Diameter The diameter of the rope shall not be less than that specified in Tables 1 to 3 and shall not exceed by more than the following tolerances: Diameter: mm)	-
8.5 Table: 1 / 2 / 3 (No. of yarns per strand)	-
8.5 Table: 1 / 2 / 3 (Linear density)	-
8.5 Table: 1 / 2 / 3 (Breaking strength Grade :)	-
9 (FINISH)	-
6.6 IS 3522 (Part 1) (Rot-Proofing Treatment If so ordered, ropes shall be rot-proofed by the application of zinc or copper based rot-proofing agent in appropriate quantity as agreed to protect the rope from fungus and microbial attack. The rot-proofing agent may be applied at the dressing stage for uniform penetration in the rope. Ropes which have been so treated shall otherwise comply, in all respects with the requirements of this standard. When Zn or Copper are extracted in accordance with IS 3522 (Part 1), it shall be minimum 0.5 percent and 0.2 percent respectively.)	-

-
-

8691

BIS, Southern Regional Laboratory (SRL)

None

IS 13258 (2014)

Welded low carbon steel cylinders exceeding 5 litre water capacity for low pressure liquefiable gas - Requirements for inspection and reconditioning of used lpg cylinders (First Revision)

- View breakup
Rs. 900/- (for physical defects of cylinder excluding bottom shell thickness) + charges as per referred ISS.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
10.4 (Tare Weight Verification)	-
14 (HYDROSTATIC TEST)	-
16 (PNEUMATIC TEST)	-

-
-

8692

BIS, Central Laboratory (CL)

None

IS 2548 : Part 2 (1996)

Plastic seats and covers for water - Closets - Specification: Part 2 thermoplastic seats and covers (Fifth Revision)

Rs. 5700/- and testing charges as per referred Iss View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (Shapes)	-
5.1.1.1 a) Seats: (i) Flat / Recessed underside,)	-
5.1.1.1 a) Seats: (ii) For recessed underside thickness,3 mm,Min ,)	-
5.1.1.1 a) Seats: (iii) Open / Closed front pattern .)	-
5.1.1 a) Seats: (iv) The design shall provide for fixing of the seat on water- closet by hinging device.)	-
5.1.1 a) Seats: (v) The seat shall be free from warpage)	-
5.1.2 b) Covers: (i) Shall completely cover the aperture of seat,easy to raise from seat,easy to be connected to the seat by hinging device & shall not have any projection under- side the cover.)	-
5.1.2 b) Covers: (ii) The cover shall not be less than 3 mm in thickness at any point.)	-
5.1.2 b) Covers: (iii) The cover shall be free from warpage.)	-
5.2 Finish (i) The surfaces of the seats, covers and components shall be smooth, free from blisters and delamination and reasonably free from flowlines, contamination, streaking and unintended colour variation.)	-
5.2 Finish (ii) They shall be capable of being easily cleaned and shall not be adversely affected by household cleaners.)	-
5.2 Finish (iii) There shall be no sharp edges.)	-
5.2 Finish (iv) The mouldings shall be non-absorptive and free from cracks, crevices and internal voids.)	-
6 (Dimensions ( mm))	-
6.1 (Seat)	-
6.1 a (A)	-
6.1 b (B)	-
6.1 C (C)	-
6.1 d (D)	-
6.1 e (E)	-
6.1 f (F)	-
6.1 g (G)	-
6.1 h (Thickness of seat at thinnest point , 3)	-
6.1 j (10)	-
Cl.6.2 Cover a) (Thickness of cover at thinnest point, 3)	-
Cl.6.2 Cover b) (10)	-
Hinging Device Cl 7 ((All dimensions are in mm))	-
Buffers & Distance pieces Cl.8 (Buffer) i) (No. of buffers,3 Min.)	-
8.1.1 ii) (Size of seat buffers ;)	-
8.1.1, i) (Shall have four radial ribs,moulded integrally supported by the top surface of the water-closet.supported by the top surface of the water-closet.)	-
8.1.1, ii) (Shall be not less than 45 mm in the radial direction.)	-
8.1.1, iii) (Width on plan 3 mm,Min.)	-
8.1.1, iv) (The distance between two adjacent ribs shall be not less than 100 mm.)	-
Cl 8.2.1 a) (Shall be fitted with the same number of buffers as provided for the seat.)	-
Cl 8.2.1 b) (The buffers below the seat & cover shall be placed vertically over each other.)	-
8.2.2 vi) (Alternatively the seat and cover may not be provided with buffers or distance pieces. In that case the design of seat shall be such that underside contact surface is flat and covers the whole rim of water-closet pan and is stable.)	-
Water absorption Cl 9.2 a) (1) Seat 0.75 % Max)	-
Cl9.3 Impact Resistance (1) The seat,hinges & buffers / distance pieces shall show no visible damage.)	-
Cl.9.7 Surface Hardness (Rockwell hardness number a)Seat)	-
Cl9.3 Impact Resistance (1) The seat,hinges & buffers / distance pieces shall show no visible damage.)	-
Cl .9.8 Endurance test for Seats,Covers and buffers (Shall not be dislocated & damaged.)	-
Cl 7 (Hinging Device)	-
Cl 9 (Rigidity (Cl.9.4))	-
4.1 (Seats and cover)	-

-
-

8693

BIS, Western Regional Laboratory (WRL)

None

IS 2548 : Part 2 (1996)

Plastic seats and covers for water - Closets - Specification: Part 2 thermoplastic seats and covers (Fifth Revision)

Rs. 5700/- and testing charges as per referred Iss View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Seats and cover)	-
4.2 (Hinging Device a) Bronze or Brass with Ni/Cr plating conforming to IS 1068,)	-
4.2 (b)Mild Steel with Ni/Cr plating conforming to IS 1068,)	-
4.2 (c)Al.Alloy with anodic coating conforming to IS 1868,)	-
4.2 (d)Suitable plastic. i) Water absorption on immersion for 24 hours should not exceed 0.6 percent by mass,)	-
4.2 (ii) Elongation should be 15 percent, Min, and)	-
4.2 (iii)The material should be capable of withstanding temperature up to 55°C without undergoing deformation or softening and becoming unsatisfactory in performance.)	-
5.1 (Shapes)	-
5.1.1.1 a) Seats: (ii) For recessed underside thickness,3 mm,Min ,)	-
5.1.1.1 a) Seats: (iii) Open / Closed front pattern .)	-
5.1.1 a) Seats: (iv) The design shall provide for fixing of the seat on water- closet by hinging device.)	-
5.1.1 a) Seats: (v) The seat shall be free from warpage)	-
5.1.1 a) Seats: (iv) The design shall provide for fixing of the seat on water- closet by hinging device.)	-
5.1.2 b) Covers: (i) Shall completely cover the aperture of seat,easy to raise from seat,easy to be connected to the seat by hinging device & shall not have any projection under- side the cover.)	-
5.1.2 b) Covers: (ii) The cover shall not be less than 3 mm in thickness at any point.)	-
5.1.2 b) Covers: (iii) The cover shall be free from warpage.)	-
5.2 Finish (i) The surfaces of the seats, covers and components shall be smooth, free from blisters and delamination and reasonably free from flowlines, contamination, streaking and unintended colour variation.)	-
5.2 Finish (ii) They shall be capable of being easily cleaned and shall not be adversely affected by household cleaners.)	-
5.2 Finish (iii) There shall be no sharp edges.)	-
5.2 Finish (iv) The mouldings shall be non-absorptive and free from cracks, crevices and internal voids.)	-
6.1 a (A)	-
6.1 b (B)	-
6.1 C (C)	-
6.1 d (D)	-
6.1 e (E)	-
6.1 f (F)	-
6.1 g (G)	-
6.1 h (Thickness of seat at thinnest point , 3)	-
Cl.6.2 Cover a) (Thickness of cover at thinnest point, 3)	-
6.1 j (10)	-
Hinging Device Cl 7 ((All dimensions are in mm))	-
Buffers & Distance pieces Cl.8 (Buffer) i) (No. of buffers,3 Min.)	-
8.1.1 ii) (Size of seat buffers ;)	-
8.1.1, i) (Shall have four radial ribs,moulded integrally supported by the top surface of the water-closet.supported by the top surface of the water-closet.)	-
8.1.1, ii) (Shall be not less than 45 mm in the radial direction.)	-
8.1.1, iii) (Width on plan 3 mm,Min.)	-
8.1.1, iv) (The distance between two adjacent ribs shall be not less than 100 mm.)	-
Cl 8.2.1 a) (Shall be fitted with the same number of buffers as provided for the seat.)	-
Cl 8.2.1 b) (The buffers below the seat & cover shall be placed vertically over each other.)	-
8.2.2 vi) (Alternatively the seat and cover may not be provided with buffers or distance pieces. In that case the design of seat shall be such that underside contact surface is flat and covers the whole rim of water-closet pan and is stable.)	-
Water absorption Cl 9.2 a) (1) Seat 0.75 % Max)	-
Cl9.3 Impact Resistance (1) The seat,hinges & buffers / distance pieces shall show no visible damage.)	-
Cl.9.5 Staining by Seats & Covers (Shall not be any visible colour transfer to the white cloth.)	-
Cl.9.7 Surface Hardness (Rockwell hardness number a)Seat)	-
Cl .9.8 Endurance test for Seats,Covers and buffers (Shall not be dislocated & damaged.)	-

-
-

8694

AC TEST LAB, COTERD SOLUTIONS (OPC) PRIVATE LIMITED

8170806

IS 8148 (2018)

Ducted and package air - Conditioners - Specification (Second Revision)

IDU/ODU, Ducted (IDU & ODU). Up to 17.5kW

685000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2 &4.5(Salt Spray Test)	-	40000	-
13.2(BIS Certification Marking)	-	5000	-
12.3.3(Safety Tests: )	-	0	-
12.2.6(Provisions for Earthing (Earth Resistance Test))	-	5000	-
12.2.5(Leakage Current Test)	-	5000	-
12.2.4(High Voltage Test)	-	5000	-
12.2.3(Insulation Resistance Test)	-	5000	-
12.2.2(Pressure Test or Leakage Test)	-	50000	-
12.2.1( Running Test)	-	0	-
11(Sound Test)	-	35000	-
9.3(Automatic Defrost Performance Test)	-	50000	-
9.2(Maximum Heating Performance Test)	-	80000	-
9.1(Heating Capacity Test)	-	100000	-
8.8(Power Consumption Test)	-	20000	-
7.6 & 8.7(Condensate Desposal Test)	-	40000	-
7.5 & 8.6(Enclosure Sweat Test)	-	30000	-
7.4 & 8.4, 8.5(Freeze-Up Test)	-	30000	-
7.3 & 8.3(Maximum Cooling Conditions Test)	-	80000	-
7.1 , 7.2 & 8.1(Capacity Rating Test & ISEER Test Condition )	-	150000	-
4.1 to 4.14(Constrution- IS 8148)	-	0	-

15 Jul, 2028

-
-

8695

AC TEST LAB, COTERD SOLUTIONS (OPC) PRIVATE LIMITED

8170806

IS 1391 : Part 2 (2018)

Room air conditioners - Specification: Part 2 split air conditioners (Third Revision)

Cooling/Cooling & heating IDU, ODU & both. Up to 17.5kW

640000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No. 8.2.2 (The Maximum Heating/Overload Test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	100000	-
Heating Capacity test (Clause No. 8.2.1, 9.11), Power consumption test by heat pump (Clause No. 9.8)(The Heating capacity test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	50000	-
Clause No. 5.1(Physical Verification)	-	0	-
Clause No. 15.3.3(a)(Protection against access to the live part was conducted using Test Probe B.)	-	5000	-
Clause No. 15.2.5 & 15.3.3(c)(Provision for Earthing (Earth Resistance Test) was conducted using a Earth Continuity Tester. )	-	5000	-
Clause No. 15.2.3 & 15.3.3(b)(High Voltage (Electric strength) Test was conducted using AC withstanding voltage/IR Tester. )	-	5000	-
Clause No. 15.2.4 & 15.3.3(d)( 3 Leakage Current at Operating Temperature (Leakage Current Test) was conducted using Leak Current Hitester.)	-	5000	-
Clause No. 14.3( Sound Test was conducted using Sound Level Meter. )	-	25000	-
Clause No. 8.1.3, 9.5( Freeze Up (Air Blockage Test & Drip Test) Test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	100000	Freeze Up (Air Blockage Test & Drip Test) Test charge below rated capacity 10.55 KW (3 Tr.) is Rs. 100000.00 Freeze Up (Air Blockage Test & Drip Test) Test charge rated capacity 10.55 kw and above (3 Tr. and above) is Rs. 125000.00
Clause No. 8.1.4, 9.6( Enclosure Sweat test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	50000	Enclosure Sweat test charge below rated capacity 10.55 KW (3 Tr.) is Rs. 50000.00 Enclosure Sweat test charge rated capacity 10.55 kw and above (3 Tr. and above) is Rs. 60000.00
Clause No. 8.1.2, 9.4(Maximum Operating test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	100000	Maximum Operating test below rated capacity 10.55 KW (3 Tr.) is Rs. 100000.00 Maximum Operating test rated capacity 10.55 kw and above (3 Tr. and above) is Rs. 125000.00
Cooling Capacity Test (Cl. No. 8.1.1, 9.9), Power Factor Test (Cl. No. 9.3), Power Consumption Test for Cooling (Cl. No. 9.7)(Cooling Capacity Test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	50000	Cooling Capacity Test below rated capacity 10.55 KW (3 Tr.) is Rs. 50000.00 Cooling Capacity Test rated capacity 10.55 kw and above (3 Tr. and above) is Rs. 60000.00
Cooling Capacity Test (Cl. No. 8.1.1, 9.9), Power Factor Test (Cl. No. 9.3), Power Consumption Test for Cooling (Cl. No. 9.7)(Cooling Capacity Test at Full Load and Half Load were conducted using a Balanced Ambient Room-Type Calorimeter. )	-	100000	Cooling Capacity Test at Full Load and Half Load Test below rated capacity 10.55 KW (3 Tr.) is Rs. 100000.00 Cooling Capacity Test at Full Load and Half Load Test rated capacity 10.55 kw and above (3 Tr. and above) is Rs.150000.00
Clause No. 15.4.2( Pressure Test or Leakage Test was conducted prior to start of Cooling Capacity Test using a Balanced Ambient Room-Type Calorimeter. )	-	10000	-
5.1(General- IS 1391 (Part 2))	-	0	-
5.2(Material- IS 1391 (Part 2))	-	0	-
5.3(Electrical Charged Paerts- IS 1391 (Part 2))	-	0	-
5.4(Refrigerent Circuit- IS 1391 (Part 2))	-	0	-
5.7(Air Filter- IS 1391 (Part 2))	-	0	-
5.8(Temreture Sensing Controlers- IS 1391 (Part 1), IS/IEC 60730 Part 2 Section 9)	-	0	-
5.9(Hermetic Compressor- IS 1391 (Part 1), IS 10617)	-	0	-
5.10(Motors- IS 1391 (Part 1), IS 996)	-	0	-
5.11(Heat Exchanger- IS 1391 (Part 1), IS 11329)	-	0	-
5.6(Grounding Terminal and Grounding Lead Wire- IS 1391 (Part 2), IS 302 (Part 1))	-	0	-
9.2(Safety Conditions for A3 refrigerants)	-	0	-
15.12.4,13.2(Leakage Current Test- IS 1391 (Part 2), IS 302 (Part 1))	-	0	-
9.12, 8.3, Annex-J(Measurement of ISEER- IS 1391 (Part 2))	-	0	-
9.10, 12(Sound Test- IS 1391 (Part 2))	-	0	-
9.11(Heating Capacity Test- IS 1391 (Part 2))	-	0	-
17(Marking- IS 1391(Part 2))	-	0	-
9.9(Cooling Capacity Test- IS 1391 (Part 2 ))	-	0	-

15 Jul, 2028

-
-

8696

AC TEST LAB, COTERD SOLUTIONS (OPC) PRIVATE LIMITED

8170806

IS 1391 : Part 1 (2017)

Room air conditioners - Specification: Part 1 unitary air conditioners (Third Revision)

Cooling only, Cooling and Heating up to 17.5kW

530000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No. 9.2.2 (The Maximum Heating/Overload Test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	100000	-
Heating Capacity test (Clause No. 9.2.1), Power consumption test by heat pump ( Clause No. 10.9)(The Heating capacity test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	50000	-
Clause No. 5.1(Physical Verification)	-	0	-
Clause No. 16.3.3(a)(The Protection against access to the live part was conducted using Test Probe B.)	-	5000	-
Clause No. 16.2.5 & 16.3.3(c)(The Provision for Earthing (Earth Resistance Test) was conducted using a Earth Continuity Tester. )	-	5000	-
Clause No. 16.2.3 & 16.3.3(b)(The High Voltage (Electric strength) Test was conducted using AC withstanding voltage/IR Tester. )	-	5000	-
Clause No. 16.2.4 & 16.3.3(d)(The 3 Leakage Current at Operating Temperature (Leakage Current Test) was conducted using Leak Current Hitester. )	-	5000	-
Clause No. 15.3(Sound Test was conducted using Sound Level Meter. )	-	25000	-
Clause No. 9.1.3, 10.5(Freeze Up (Air Blockage Test & Drip Test) Test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	100000	-
Clause No. 9.1.4, 10.6(Enclosure Sweat test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	50000	-
Clause No. 9.1.2, 10.4(Maximum Operating test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	100000	-
Cooling Capacity Test (Cl. No. 9.1.1, 10.10), Power Factor Test (Cl. No. 10.3), Power Consumption Test for Cooling (Cl. No. 10.8) (Cooling Capacity Test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	50000	-
Cooling Capacity Test (Cl. No. 9.1.1, 10.10), Power Factor Test (Cl. No. 10.3), Power Consumption Test for Cooling (Cl. No. 10.8) (Cooling Capacity Test at Full Load and Half Load were conducted using a Balanced Ambient Room-Type Calorimeter. )	-	100000	-
Clause No. 16.4.2(Pressure Test or Leakage Test was conducted prior to start of Cooling Capacity Test using a Balanced Ambient Room-Type Calorimeter. )	-	10000	-
5.2(Material)	-	0	-
5.3.5(Electrical Cable)	-	0	-
5.4(Refrigerent Cycle)	-	0	-
5.7(Air Filter)	-	0	-
5.8(Temreture Sensing Controlers- IS 1391 (Part 1), IS/IEC 60730 Part 2 Section 9)	-	0	-
5.9(Hermetic Compressor)	-	0	-
5.10(Motors)	-	0	-
5.11(Heat Exchanger)	-	0	-
5.6(Grounding Terminal and Grounding Lead Wire)	-	0	-
10.7(Condensate disposal test as per)	-	0	-
10.11, 15(Sound Test)	-	0	-
10.12(Heating Capacity Test)	-	0	-
10.2(Safety Conditions for unit using A3 refrigerants)	-	0	-
18(Marking- IS 1391 (Part 1))	-	0	-

15 Jul, 2028

-
-

8697

GLOBAL LAB AND CONSULTANCY SERVICES LLP

6170916

IS 3029 (1964)

Specification for castorseed cake for purposes for fertilizer

Type 1 Type 2

900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3 Table 1 & i)("Moisture percent by weight")	-	200	-
4.3 Table 1 & ii)("Water insoluble organic nitrogen percent by weight")	-	200	-
4.3 Table 1 & iv)("Acid insoluble ash percent by weight")	-	200	-
"4.3 Table 1 & iii)"("Total ash percent by weight")	-	300	-

13 Jul, 2028

-
-

8698

GLOBAL LAB AND CONSULTANCY SERVICES LLP

6170916

IS 1713 (1986)

Specification for decorticated groundnut oil cake as livestock feed ingredient (Second Revision)

Type I & Type II

1650 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2 Table 1 & i)(Moisture percent by mass)	-	200	-
4.2 Table 1 & ii)("Crude protein percent by mass")	-	350	-
4.2 Table 1 & iii)("Crude fat percent by mass")	-	350	-
4.2 Table 1 & iv)("Crude fibre percent by mass")	-	350	-
4.2 Table 1 & v)("Acid insoluble ash percent by mass")	-	400	-

13 Jul, 2028

-
-

8699

BIS, Southern Regional Laboratory (SRL)

None

IS 14151 : Part 1 (1999)

Irrigation equipment - Sprinkler pipes - Specification: Part 1 polyethylene pipes (First Revision)

Rs.17350/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.3 (CLASSIFICATION OF PIPES)	-
6.1 (VISUAL APPEARANCE)	-

-
Excluding Standard superseded, will be removed from scope

8700

GLOBAL LAB AND CONSULTANCY SERVICES LLP

6170916

IS 2154 (2014)

Coconut oilcake as livestock feed ingredient - Specification (Third Revision)

Type I & Type II

2200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
"4.2 Table 1 & i)"(Moisture percent by mass)	-	300	-
"4.2 Table 1 & ii)"("Crude protein percent by mass")	-	500	-
4.2 Table 1 & iii)("Crude fat percent by mass")	-	500	-
"4.2 Table 1 & iv)"("Crude fibre percent by mass")	-	500	-
"4.2 Table 1 & v)"("Acid insoluble ash percent by mass")	-	400	-

13 Jul, 2028

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number