BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

14026 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

8701

MICRO ENGINEERING AND TESTING LABORATORY OPC PRIVATE LIMITED, SONIPAT

9186006

IS 269 (2015)

Ordinary portland cement - Specification (Sixth Revision)

OPC 33/ OPC 43/ OPC 53/ OPC 43S/ OPC 53S

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1 Table-2 viii(Alkali content)	-	800	-
6.1 Table-2 vii(Chloride content)	-	800	-
6.1 Table-2 vi(Loss on ignition)	-	400	-
6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride)	-	600	-
6.1 Table-2 iv(Magnesia)	-	600	-
6.1 Table-2 iii.(Insoluble residue)	-	600	-
6.1 Table-2 ii.(Ratio of percentage of alumina to that of iron oxide)	-	600	-
6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-	2000	-
6 - Table - 1 viii(Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	800	-
6 - Table - 1 vii(Chloride content - Cl 4.13 of IS 4032:1985)	-	800	-
6 - Table - 1 vi(Loss on ignition - Cl 4.2 of IS 4032:1985)	-	400	-
6 - Table - 1 v(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	600	-
6 - Table - 1 iv(Magnesia - Cl 4.8 of IS 4032:1985)	-	600	-
6 - Table - 1 iii(Insoluble residue - Cl 4.10 of IS 4032:1985)	-	600	-
6 - Table - 1 ii(Ratio of percentage of alumina to that of iron oxide - Cl 4 of IS 4032:1985)	-	600	-
6 - Table - 1 i(Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-	2000	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iii b(Setting Time Final)	-	500	-
7 Table-3 iii a(Setting Time Initial)	-	500	-
7 Table-3 ii b(Expansion after aeration)	-	800	-
7 Table-3 ii b(Expansion by Autoclave)	-	800	-
7 Table-3 ii a(Expansion after aeration)	-	800	-
7 Table-3 ii a(Expansion by Le Chatelier)	-	500	-
7 Table-3 i.(Fineness)	-	600	-
6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-	2000	-
6 - Table - 1 ii(Ratio of percentage of alumina to that of iron oxide - Cl 4 of IS 4032:1985)	-	600	-
6.1 Table-2 viii(Alkali content)	-	800	-
6.1 Table-2 vii(Chloride content)	-	800	-
6.1 Table-2 vi(Loss on ignition)	-	400	-
6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride)	-	600	-
6.1 Table-2 iv(Magnesia)	-	600	-
6.1 Table-2 iii.(Insoluble residue)	-	600	-
6.1 Table-2 ii.(Ratio of percentage of alumina to that of iron oxide)	-	600	-
6 - Table - 1 viii( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	800	-
6 - Table - 1 vii(Chloride content - Cl 4.13 of IS 4032:1985)	-	800	-
6 - Table - 1 vi(Loss on ignition - Cl 4.2 of IS 4032:1985)	-	400	-
6 - Table - 1 v(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	600	-
6 - Table - 1 iv(Magnesia - Cl 4.8 of IS 4032:1985)	-	600	-
6 - Table - 1 i(Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-	2000	-
6.1 Table-2 viii(Alkali content)	-	800	-
6.1 Table-2 vii(Chloride content)	-	800	-
6.1 Table-2 vi(Loss on ignition)	-	400	-
6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride)	-	600	-
6.1 Table-2 iv(Magnesia)	-	600	-
6.1 Table-2 iii.(Insoluble residue)	-	600	-
6.1 Table-2 ii.(Ratio of percentage of alumina to that of iron oxide)	-	600	-
6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-	2000	-
6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-	2000	-
6.1 Table-2 ii.(Ratio of percentage of alumina to that of iron oxide)	-	600	-
6.1 Table-2 iii.(Insoluble residue)	-	600	-
6.1 Table-2 iv(Magnesia)	-	600	-
6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride)	-	600	-
6.1 Table-2 vi(Loss on ignition)	-	400	-
6.1 Table-2 vii(Chloride content)	-	800	-
5.1.1 Table 1 Sl. No. iv(Calcium Carbonate)	-	400	-
15.4(Requirments for systems implementing section 4)	-	0	N/A
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iii b(Setting Time Final)	-	500	-
7 Table-3 iii a(Setting Time Initial)	-	500	-
7 Table-3 ii b(Expansion after aeration)	-	800	-
7 Table-3 ii b(Expansion by Autoclave)	-	800	-
7 Table-3 ii a(Expansion by Le Chatelier)	-	500	-
7 Table-3 i.(Fineness)	-	600	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iii b(Setting Time Final)	-	500	-
7 Table-3 iii a(Setting Time Initial)	-	500	-
7 Table-3 ii b(Expansion after aeration)	-	800	-
7 Table-3 ii b(Expansion by Autoclave)	-	800	-
7 Table-3 ii a(Expansion after aeration)	-	800	-
7 Table-3 ii a(Expansion by Le Chatelier)	-	500	-
7 Table-3 i.(Fineness)	-	600	-
7 Table-3 i.(Fineness)	-	600	-
7 Table-3 ii a(Expansion by Le Chatelier)	-	500	-
7 Table-3 ii a(Expansion after aeration)	-	800	-
7 Table-3 ii b(Expansion by Autoclave)	-	800	-
7 Table-3 ii b(Expansion after aeration)	-	800	-
7 Table-3 iii a(Setting Time Initial)	-	500	-
7 Table-3 iii b(Setting Time Final)	-	500	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	750	-
6 - Table - 1 iii(Insoluble residue - Cl 4.10 of IS 4032:1985)	-	600	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	750	-
7 Table-3 ii a(Expansion after aeration)	-	800	-
7 Table-3 v(Transverse Strength - IS 4031 Part 8 (Optional))	-	0	N/A
7 Table-3 v(Transverse Strength - IS 4031 Part 8 (Optional))	-	0	N/A
7 Table-3 v(Transverse Strength - IS 4031 Part 8 (Optional))	-	0	N/A
7 Table-3 v(Transverse Strength - IS 4031 Part 8 (Optional))	-	0	N/A
7.1.8(Pump efficiency shall be as per 11.4)	-	0	N/A
Clause 7 Table 3, SI No. (v) (Compressive strength of Transverse Specimen, 672 ± 4 h)	-	0	N/A
Clause 7 Table 3, SI No. (v) (Compressive strength of Transverse Specimen, 168 ± 2 h)	-	0	N/A
Clause 7 Table 3, SI No. (v) (Compressive strength of Transverse Specimen, 72 ± 1 h)	-	0	N/A
Clause 7 Table 3, SI No. (v) (Transverse Strength, 672 ± 4 h)	-	0	N/A
Clause 7 Table 3, SI No. (v) (Transverse Strength, 168 ± 2 h)	-	0	N/A
Clause 7 Table 3, SI No. (v) (Transverse Strength, 72 ± 1 h)	-	0	N/A
11(Marking)	-	0	N/A
5(Manufacture)	-	0	N/A
9(Manufacture certificate)	-	0	N/A
13(Requirment for an originating system )	-	0	N/A
14(Requirment for an Reciving system )	-	0	N/A
15.2.1(Records characteristics)	-	0	N/A
15.2.3(Fixed length record )	-	0	N/A
15.2.4(Variable length record)	-	0	N/A
15.2.5(segmented records)	-	0	N/A
15.3(Attributes of record structured files)	-	0	N/A
10(Packing)	-	0	N/A
15.2.2(Measured data unit)	-	0	N/A

04 Jun, 2028

-
-

8702

Bharat Test House Pvt Ltd 1474 Sonipat Haryana

9135626

IS 15885 : PART 2 : SEC 9 (2011)

Safety of lamp control gear: Part 2 particular requirements: Sec 9 ballasts for discharge lamps (Excluding Fluorescent Lamps)

Ballasts For Discharge Lamps

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
21(Resistance to Corrosion)	-	5200	5% discount for BIS
20(Resistance to heat, fire and tracking )	-	6500	5% discount for BIS
19(Screws, current-carrying parts and Connections )	-	2000	5% discount for BIS
18(Creepage distances and Clearance )	-	1000	5% discount for BIS
17(Construction)	-	3000	5% discount for BIS
16(Fault Conditions)	-	2000	5% discount for BIS
15(High Voltage Impulse Testing)	-	2000	5% discount for BIS
14(Ballast Heating)	-	5000	5% discount for BIS
13(Thermal endurance test for windings )	-	8000	5% discount for BIS
12(Electric strength)	-	2000	5% discount for BIS
11(Moisture resistance and insulation)	-	10000	5% discount for BIS
10(Provisions for earthing)	-	1000	5% discount for BIS
9(Terminals)	-	1000	5% discount for BIS
8(Protection against accidental contact with live parts)	-	1000	5% discount for BIS
7(Marking)	-	200	5% discount for BIS
6(Classification)	-	100	5% discount for BIS

19 Mar, 2026

-
-

8703

Bharat Test House Pvt Ltd 1474 Sonipat Haryana

9135626

IS 15885 : PART 2 : SEC 8 (2011)

Safety of lamp control gear: Part 2 particular requirements: Sec 8 ballasts for fluorescent lamps

Ballasts For Fluorescent Lamps

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
21(Resistance to Corrosion)	-	5200	5% discount for BIS
20(Resistance to heat, fire and tracking )	-	6500	5% discount for BIS
19(Screws, current-carrying parts and Connections )	-	2000	5% discount for BIS
18(Creepage distances and Clearance )	-	1000	5% discount for BIS
17(Construction)	-	3000	5% discount for BIS
16(Fault Conditions)	-	2000	5% discount for BIS
15(High Voltage Impulse Testing)	-	2000	5% discount for BIS
14(Ballast Heating)	-	5000	5% discount for BIS
13(Thermal endurance test for windings )	-	8000	5% discount for BIS
12(Electric strength)	-	2000	5% discount for BIS
11(Moisture resistance and insulation)	-	10000	5% discount for BIS
10(Provisions for earthing)	-	1000	5% discount for BIS
9(Terminals)	-	1000	5% discount for BIS
8(Protection against accidental contact with live parts)	-	1000	5% discount for BIS
7(Marking)	-	200	5% discount for BIS
6(Classification)	-	1000	5% discount for BIS

19 Mar, 2026

-
-

8704

Bharat Test House Pvt Ltd 1474 Sonipat Haryana

9135626

IS 15885 : PART 2 : SEC 3 (2011)

Safety of lamp control gear: Part 2 particular requirements: Sec 3 ac supplied electronic ballasts for fluorescent lamps

Ac Supplied Electronic Ballasts For Fluorescent Lamps

42000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
21(Resistance to Corrosion)	-	5200	5% discount for BIS
20(Resistance to heat, fire and tracking )	-	2500	5% discount for BIS
19(Screws, current-carrying parts and Connections )	-	2000	5% discount for BIS
18(Creepage distances and Clearance )	-	1000	5% discount for BIS
17(Construction)	-	3000	5% discount for BIS
16(Abnormal Condition)	-	7000	5% discount for BIS
15(Protection of associated Components)	-	3000	5% discount for BIS
14(Fault Conditions)	-	2000	5% discount for BIS
13(Thermal endurance test for windings )	-	5000	5% discount for BIS
12(Electric strength)	-	2000	5% discount for BIS
11(Moisture resistance and insulation)	-	5000	5% discount for BIS
10(Provisions for earthing)	-	1000	5% discount for BIS
9(Terminals)	-	1000	5% discount for BIS
8(Protection against accidental contact with live parts)	-	1000	5% discount for BIS
7(Marking)	-	200	5% discount for BIS
6(Classification)	-	100	5% discount for BIS

19 Mar, 2026

-
-

8705

Spectro Analytical Labs Private Limited, Gautam Buddha Nagar

8130426

IS 16048 : Part 2 (2021)

SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES SECONDARY SEALED CELLS AND BATTERIES FOR PORTABLE APPLICATIONS PART 2: NICKEL-METAL HYDRIDE

300000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(Parameter measurement tolerances)	-	0	-
Cl-5.1(Cell designation)	-	0	-
Cl-5.3(Marking)	-	0	-
Cl-6.1.1(General)	-	0	-
Cl-6.1.2(Small prismatic cells)	-	0	-
Cl-6.1.3.1(Cells dimensionally interchangeable with primary cells)	-	0	-
Cl-6.1.3.2(cells not dimensionally interchangeable with primary cells)	-	0	-
Cl-6.2(Button cells)	-	0	-
Cl-6.3(9 V type nickel-metal hydride batteries)	-	0	-
Cl-7.1(General)	-	0	-
Cl-7.2(Charging procedure for test purposes)	-	15000	-
Cl-7.3.2.2(Discharge performance for cells at 20 °C)	-	15000	-
Cl-7.3.2.3(Discharge performance for batteries at 20 °C)	-	15000	-
Cl-7.3.2.4(Rated capacity (mAh) compliance test (example))	-	15000	-
Cl-7.3.3(Discharge performance at 0 °C)	-	15000	-
Cl-7.3.4(Discharge performance for rapid charge cells (R cells))	-	15000	-
Cl-7.4(Charge (capacity) retention)	-	10000	-
Cl-7.5.1.1(General)	-	0	-
Cl-7.5.1.2(Small prismatic, button and cylindrical cells not dimensionally interchangeable with primary cells)	-	20000	-
Cl-7.5.1.3.1(General)	-	15000	-
Cl-7.5.1.3.2(H or X cells)	-	5000	-
Cl-7.5.1.3.3(X cells)	-	5000	-
Cl-7.5.1.3.4(HR or XR cells)	-	5000	-
Cl-7.5.1.4(Cylindrical cells dimensionally interchangeable with primary cells)	-	5000	-
Cl-7.5.2.1(Small prismatic and button cells)	-	5000	-
Cl-7.5.2.2(L, M, H or X cylindrical cells)	-	0	-
Cl-7.5.2.3(LT, MT or HT cylindrical cells)	-	0	-
Cl-7.5.2.4(JT cylindrical cells)	-	0	-
Cl-7.5.2.5(LU, MU or HU cylindrical cells)	-	0	-
Cl-7.7.1(Small prismatic, L, M, H, X, LS or MS cylindrical, and button cells)	-	0	-
Cl-7.7.2(LT/LU, MT/MU or HT/HU cylindrical cells)	-	0	-
Cl-7.7.3(J cylindrical cells)	-	0	-
Cl-7.7.4(JT cylindrical cells)	-	0	-
Cl-7.7.5(R cylindrical cells)	-	0	-
Cl-7.8(Safety device operation)	-	0	-
Cl-7.9(Surface temperature limitation device operation (for S cell only))	-	0	-
Cl-7.10.1(Button cells or batteries, small prismatic cells or batteries, cylindrical cells or batteries)	-	0	-
Cl-7.10.2(2 Button cells or batteries, small prismatic cells or batteries, cylindrical cells or batteries (high recovery type))	-	0	-
Cl-7.11(Charge acceptance at +55 °C for LT, MT or HT cylindrical cells)	-	5000	-
Cl-7.12(Trickle charge acceptance for JT cylindrical cells)	-	5000	-
Cl-7.13.2(Measurement of the internal AC resistance)	-	2000	-
Cl-7.13.3(Measurement of the internal DC resistance)	-	2000	-
Cl-8 (Cl- 4.1 of IEC 61959(Vibration test)	-	5000	-
Cl-8 (Cl- 4.1 of IEC 61959(Open circuit voltages)	-	2000	-
Cl-8 (Cl- 4.2 of IEC 61959(Free fall test (cells and hard pack batteries only))	-	2000	-
Cl-8 (Cl- 4.2 of IEC 61959(Height of fall as a function of weight)	-	2000	-
Cl-8 (Cl- 5 of IEC 61959(Type approval)	-	0	-
Cl-9 (Cl- 8.1 of IEC 62133(General)	-	0	-
Cl-9 (Cl- 8.2 of IEC 62133(Small cell and battery safety information)	-	0	-
Cl-10.2.1(Type approval for small prismatic cells and button cells)	-	0	-
Cl-10.2.2(Type approval for cylindrical cells)	-	0	-
Cl-10.2.3(Type approval for batteries)	-	0	-
Cl-10.3(Batch acceptance)	-	0	-
Cl-4(Parameter measurement tolerances)	-	0	-
Cl-5.1(Cell designation)	-	0	-
Cl-5.3(Marking)	-	0	-
Cl-6.1.1(General)	-	0	-
Cl-6.1.2(Small prismatic cells)	-	0	-
Cl-6.1.3.1(Cells dimensionally interchangeable with primary cells)	-	0	-
Cl-6.1.3.2(cells not dimensionally interchangeable with primary cells)	-	0	-
Cl-6.2(Button cells)	-	5000	-
Cl-6.3(9 V type nickel-metal hydride batteries)	-	5000	-
Cl-7.1(General)	-	5000	-
Cl-7.2(Charging procedure for test purposes)	-	5000	-
Cl-7.3.2.2(Discharge performance for cells at 20 °C)	-	5000	-
Cl-7.3.2.3(Discharge performance for batteries at 20 °C)	-	5000	-
Cl-7.3.2.4(Rated capacity (mAh) compliance test (example))	-	5000	-
Cl-7.3.3(Discharge performance at 0 °C)	-	5000	-
Cl-7.3.4(Discharge performance for rapid charge cells (R cells))	-	0	-
Cl-7.4(Charge (capacity) retention)	-	0	-
Cl-7.5.1.1(General)	-	0	-
Cl-7.5.1.2(Small prismatic, button and cylindrical cells not dimensionally interchangeable with primary cells)	-	0	-
Cl-7.5.1.3.1(General)	-	0	-
Cl-7.5.1.3.2(H or X cells)	-	0	-
Cl-7.5.1.3.3(X cells)	-	0	-
Cl-7.5.1.3.4(HR or XR cells)	-	0	-
Cl-7.5.1.4(Cylindrical cells dimensionally interchangeable with primary cells)	-	0	-
Cl-7.5.2.1(Small prismatic and button cells)	-	0	-
Cl-7.5.2.2(L, M, H or X cylindrical cells)	-	0	-
Cl-7.5.2.2(L, M, H or X cylindrical cells)	-	0	-
Cl-7.5.2.3(LT, MT or HT cylindrical cells)	-	0	-
Cl-7.5.2.4(JT cylindrical cells)	-	0	-
Cl-7.5.2.5(LU, MU or HU cylindrical cells)	-	0	-
Cl-7.7.1(Small prismatic, L, M, H, X, LS or MS cylindrical, and button cells)	-	0	-
Cl-7.7.2(LT/LU, MT/MU or HT/HU cylindrical cells)	-	0	-
Cl-7.7.3(J cylindrical cells)	-	0	-
Cl-7.7.4(JT cylindrical cells)	-	0	-
Cl-7.7.5(R cylindrical cells)	-	0	-
Cl-7.8(Safety device operation)	-	0	-
Cl-7.9(Surface temperature limitation device operation (for S cell only))	-	0	-
Cl-7.10.1(Button cells or batteries, small prismatic cells or batteries, cylindrical cells or batteries)	-	5000	-
Cl-7.10.2(2 Button cells or batteries, small prismatic cells or batteries, cylindrical cells or batteries (high recovery type))	-	5000	-
Cl-7.11(Charge acceptance at +55 °C for LT, MT or HT cylindrical cells)	-	5000	-
Cl-7.12(Trickle charge acceptance for JT cylindrical cells)	-	5000	-
Cl-7.13.2(Measurement of the internal AC resistance)	-	2000	-
Cl-7.13.3(Measurement of the internal DC resistance)	-	2000	-
Cl-8 (Cl- 4.1 of IEC 61959)(Vibration test)	-	5000	-
Cl-8 (Cl- 4.2 of IEC 61959)(Free fall test (cells and hard pack batteries only))	-	5000	-
Cl. 9 (Cl. 7.2.1 of IEC 62133)(Low rate charging)	-	5000	-
Cl. 9 (Cl. 7.2.2 of IEC 62133)(Vibration)	-	5000	-
Cl. 9 (Cl. 7.2.3 of IEC 62133)(Case stress)	-	5000	-
Cl. 9 (Cl. 7.2.4 of IEC 62133)(Temperature cycling)	-	5000	-
Cl. 9 (Cl. 7.3.1 of IEC 62133)(Incorrect installation)	-	5000	-
Cl. 9 (Cl. 7.3.2 of IEC 62133)(External short circuit)	-	5000	-
Cl. 9 (Cl. 7.3.3 of IEC 62133)(Free fall)	-	2000	-
Cl. 9 (Cl. 7.3.4 of IEC 62133)(Mechanical shock)	-	5000	-
Cl. 9 (Cl. 7.3.5 of IEC 62133)(Thermal abuse)	-	5000	-
Cl. 9 (Cl. 7.3.6 of IEC 62133)(Crush)	-	5000	-
Cl. 9 (Cl. 7.3.7 of IEC 62133)(Low pressure)	-	5000	-
Cl. 9 (Cl. 7.3.8 of IEC 62133)(Overcharge)	-	5000	-
Cl. 9 (Cl. 7.3.9 of IEC 62133)(Forced discharge)	-	5000	-
Cl-9 (Cl- 8.1 of IEC 62133)(General)	-	0	-
Cl-9 (Cl- 8.2 of IEC 62133(Small cell and battery safety information)	-	0	-
10(Type approval and batch acceptance)	-	0	-

04 Jan, 2027

-
Included w.e.f. 25.04.2024

8706

Testtex India Laboratories Private Limited, Noida

8138306

IS 15298 : part 4 (2017)

Personal protective equipment: Part 4 occupational footwear (Second Revision)

Occupational Footwear

54200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table 1(CLASS I)	-	200	-
Table 1(CLASS II)	-	200	-
5.2.2.1(General)	-	500	-
5.2.2.2(Height of upper)	-	300	-
5.2.2.3(Seat region)	-	300	-
5.3.2.1(Construction)	-	300	-
5.3.1.2(Upper/outsole bond strength)	-	700	-
5.3.2.2(Leakproofness)	-	500	-
5.3.2.3(Specific ergonomic features )	-	1000	-
5.3.2.5(Innocuousness )	-	26500	-
5.4.2.1(Upper)	-	300	-
5.4.2.2(Thickness )	-	300	-
5.4.2.3(Tear strenth)	-	500	-
5.4.2.4(Tensile properties)	-	500	-
5.4.2.5(Flexing resistance )	-	1000	-
5.4.2.6(Water vapour permeability and coefficient )	-	700	-
5.4.2.7(pH value )	-	500	-
5.4.2.8(Hydrolysis)	-	3500	-
5.4.2.9(Chromium VI content )	-	750	-
5.5.2.1(Tear strength )	-	500	-
5.5.2.2(Abrasion resistance )	-	700	-
5.5.2.3(Water vapour permeability and coefficient )	-	700	-
5.5.2.4(pH value )	-	500	-
5.5.2.5(Chromium VI content )	-	750	-
5.6(Tongue )	-	0	-
5.6.2.1(Tear strength )	-	500	-
5.6.2.2(pH value )	-	500	-
5.6.2.3(Chromium VI content )	-	750	-
5.7.2.1(Insole and insock )	-	300	-
5.7.2.2(Insole and insock )	-	500	-
5.7.2.3(Water absorption and desorption )	-	500	-
5.7.4.1(Abrasion resistance )	-	400	-
5.7.4.2(Abrasion resistance )	-	700	-
5.7.2.5(Chromium VI content )	-	750	-
5.8.2.1(Outsole)	-	0	-
5.8.1.1(Thickness )	-	300	-
5.8.1.2(Cleated area )	-	300	-
5.8.1.3(Cleat height)	-	300	-
5.8.2.2(Tear strength )	-	500	-
5.8.2.3(Abrasion resistance )	-	700	-
5.8.2.4(Flexing resistance )	-	700	-
5.8.2.5(Hydrolysis )	-	3500	-
5.8.2.6(Interlayer bond strength )	-	700	-
6.2.1.1(Metallic anti-penetration insert )	-	1000	-
6.2.1.1.2(Non-metallic anti-penetration insert used as an insole)	-	1000	-
6.2.1.2(Construction)	-	200	-
6.2.1.3(Dimensions )	-	300	-
6.2.1.4(Flex resistance of penetration-resistant inserts )	-	2500	-
6.2.1.5.1(Corrosion resistance of penetration-resistant metallic inserts)	-	500	-
6.2.1.5.2(Penetration-resistant non-metallic inserts)	-	1000	-
6.2.2.1(Conductive footwear)	-	1000	-
6.2.2.2(Antistatic footwear)	-	1000	-
6.2.3.1(Heat insulation of sole complex )	-	700	-
6.2.3.2(Cold insulation of sole complex)	-	700	-
6.2.2.4(Energy absorption of seat region )	-	2000	-
6.2.2.5(Water resistance )	-	500	-
6.2.7.1(Cut resistance foot wear)	-	0	-
6.2.7.2(Cut resistance foot wear)	-	0	-
6.2.7.3(Resistance to cutting)	-	2500	-
6.2.7.4(Pentration resistance)	-	1000	-
6.3.2.2(Upper- water penetration)	-	1000	-
6.4.2.1(Resistance to hot contact)	-	700	-
6.4.2.2(Resistance to fuel oil)	-	700	-
7(a)(Marking)	-	0	-
7(b)(Marking)	-	0	-
7(c)(Marking)	-	0	-
7(d)(Marking)	-	0	-
7(e)(Marking)	-	0	-
7(e)(Marking)	-	0	-
Table 1(CLASS I)	-	0	Clause Repeated
Table 1(CLASS II)	-	0	Clause Repeated
5.2.2.1(General)	-	0	Clause Repeated
5.2.2.2(Height of upper)	-	0	Clause Repeated
5.2.2.3(Seat region)	-	0	Clause Repeated
5.3.2.1(Construction)	-	0	Clause Repeated
5.3.1.2(Upper/outsole bond strength)	-	0	Clause Repeated
5.3.2.2(Leakproofness)	-	0	Clause Repeated
5.3.2.3(Specific ergonomic features )	-	0	Clause Repeated
5.3.2.5(Innocuousness )	-	0	Clause Repeated
5.4.2.1(Upper)	-	0	Clause Repeated
5.4.2.2(Thickness )	-	0	Clause Repeated
5.4.2.3(Tear strenth)	-	0	Clause Repeated
5.4.2.4(Tensile properties)	-	0	Clause Repeated
5.4.2.5(Flexing resistance )	-	0	Clause Repeated
5.4.2.6(Water vapour permeability and coefficient )	-	0	Clause Repeated
5.4.2.7(pH value )	-	0	Clause Repeated
5.4.2.8(Hydrolysis)	-	0	Clause Repeated
5.4.2.9(Chromium VI content )	-	0	Clause Repeated
5.5.2.1(Tear strength )	-	0	Clause Repeated
5.5.2.2(Abrasion resistance )	-	0	Clause Repeated
5.5.2.3(Water vapour permeability and coefficient )	-	0	Clause Repeated
5.5.2.4(pH value )	-	0	Clause Repeated
5.5.2.5(Chromium VI content )	-	0	Clause Repeated
5.6(Tongue )	-	0	Clause Repeated
5.6.2.1(Tear strength )	-	0	Clause Repeated
5.6.2.2(pH value )	-	0	Clause Repeated
5.6.2.3(Chromium VI content )	-	0	Clause Repeated
5.7.2.1(Insole and insock )	-	0	Clause Repeated
5.7.2.2(Insole and insock )	-	0	Clause Repeated
5.7.2.3(Water absorption and desorption )	-	0	Clause Repeated
5.7.4.1(Abrasion resistance )	-	0	Clause Repeated
5.7.4.2(Abrasion resistance )	-	0	Clause Repeated
5.7.2.5(Chromium VI content )	-	0	Clause Repeated
5.8.2.1(Outsole)	-	0	Clause Repeated
5.8.1.1(Thickness )	-	0	Clause Repeated
5.8.1.2(Cleated area )	-	0	Clause Repeated
5.8.1.3(Cleat height)	-	0	Clause Repeated
5.8.2.2(Tear strength )	-	0	Clause Repeated
5.8.2.3(Abrasion resistance )	-	0	Clause Repeated
5.8.2.4(Flexing resistance )	-	0	Clause Repeated
5.8.2.5(Hydrolysis )	-	0	Clause Repeated
5.8.2.6(Interlayer bond strength )	-	0	Clause Repeated
6.2.1.1(Metallic anti-penetration insert )	-	0	Clause Repeated
6.2.1.1.2(Non-metallic anti-penetration insert used as an insole)	-	0	Clause Repeated
6.2.1.2(Construction)	-	0	Clause Repeated
6.2.1.3(Dimensions )	-	0	Clause Repeated
6.2.1.4(Flex resistance of penetration-resistant inserts )	-	0	Clause Repeated
6.2.1.5.1(Corrosion resistance of penetration-resistant metallic inserts)	-	0	Clause Repeated
6.2.1.5.2(Penetration-resistant non-metallic inserts)	-	0	Clause Repeated
6.2.2.1(Conductive footwear)	-	0	Clause Repeated
6.2.2.2(Antistatic footwear)	-	0	Clause Repeated
6.2.3.1(Heat insulation of sole complex )	-	0	Clause Repeated
6.2.3.2(Cold insulation of sole complex)	-	0	Clause Repeated
6.2.2.4(Energy absorption of seat region )	-	0	Clause Repeated
6.2.2.5(Water resistance )	-	0	Clause Repeated
6.2.7.1(Cut resistance foot wear)	-	0	Clause Repeated
6.2.7.2(Cut resistance foot wear)	-	0	Clause Repeated
6.2.7.3(Resistance to cutting)	-	0	Clause Repeated
6.2.7.4(Pentration resistance)	-	0	Clause Repeated
6.3.2.2(Upper- water penetration)	-	0	Clause Repeated
6.4.2.1(Resistance to hot contact)	-	0	Clause Repeated
6.4.2.2(Resistance to fuel oil)	-	0	Clause Repeated
7(a)(Marking)	-	0	Clause Repeated
7(b)(Marking)	-	0	Clause Repeated
7(c)(Marking)	-	0	Clause Repeated
7(d)(Marking)	-	0	Clause Repeated
7(e)(Marking)	-	0	Clause Repeated
7(e)(Marking)	-	0	Clause Repeated
5.3.4.1(Slip resistance)	-	2000	-
5.3.4.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (SLS) solution)	-	0	Inclusive in Clause 5.3.4.1
5.3.4.3(Slip resistance on steel floor with glycerine )	-	0	Inclusive in Clause 5.3.4.1
5.3.4.4(Slip resistance on ceramic tile floor with SLS and on steel floor with glycerine )	-	0	Inclusive in Clause 5.3.4.1

31 Dec, 2026

-
Included w.e.f. 03.10.2024 Exclusion: for all types of footwear except electrically insulated footwear, ankle protection footwear, Cl.5.3.2.5 innocuousness allergenic and carcinogenic disperse dyes

8707

Bharat Test House Pvt Ltd 1474 Sonipat Haryana

9135626

IS 15885 : PART 2 : SEC 1 (2011)

Safety of lamp control gear: Part 2 particular requirements: Sec 1 starting devices (Other Than Glow Starters)

Starters For Discharge Lamps

50050 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
22(Resistance to Corrosion)	-	5200	5% discount for BIS
21(Resistance to heat, fire and tracking)	-	6500	5% discount for BIS
20(Screws, current-carrying parts and Connections)	-	3000	5% discount for BIS
19(Creepage distances and Clearance )	-	1000	5% discount for BIS
18(Construction)	-	3000	5% discount for BIS
17(Mechanical Strength)	-	1000	5% discount for BIS
16(Pulse Voltage of Ignitors)	-	7000	5% discount for BIS
15(Heating of independent starting Devices)	-	3000	5% discount for BIS
14(Fault Conditions)	-	2000	5% discount for BIS
13(Thermal endurance test for windings )	-	8000	5% discount for BIS
12(Electric strength)	-	2000	5% discount for BIS
11(Moisture resistance and insulation)	-	5000	5% discount for BIS
10(Provisions for earthing)	-	1000	5% discount for BIS
9(Terminals)	-	1000	5% discount for BIS
8(Protection against accidental contact with live parts)	-	1000	5% discount for BIS
7(Marking)	-	250	5% discount for BIS
6(Classification)	-	100	5% discount for BIS

19 Mar, 2026

-
-

8708

Bharat Test House Pvt Ltd 1474 Sonipat Haryana

9135626

IS 15882 (2009)

Ballasts for discharge lamps (Excluding Tubular Fluorescent Lamps) - Performance requirements

Ballasts For Discharge Lamps

42500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
15(Electrical requirements for Ballasts for high-pressure sodium Vapour lamps)	-	5000	5% discount for BIS
14(Electrical requirements for Ballasts for metal halide lamps)	-	5000	5% discount for BIS
13(Electrical requirements for Ballasts for low-pressure sodium Vapour lamps)	-	5000	5% discount for BIS
12(Electrical requirements for ballasts For high-pressure mercury)	-	5000	5% discount for BIS
11(Ignitors)	-	12500	5% discount for BIS
10(Magnetic Screening)	-	2250	5% discount for BIS
9(Current Waveform)	-	3000	5% discount for BIS
8(Supply Current)	-	2500	5% discount for BIS
7(Circuit Power factor)	-	1500	5% discount for BIS
6(Ballasts designed to operate various supply voltages)	-	500	5% discount for BIS
5(Marking)	-	250	5% discount for BIS

19 Mar, 2026

-
-

8709

Bharat Test House Pvt Ltd 1474 Sonipat Haryana

9135626

IS 15518 : Part 1 (2004)

Safety requirements for incandescent lamps: Part 1 tungsten filament lamps for domestic and similar general lighting purposes

Incandescent Tungsten Filament Lamps for Domestic and

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.1(Mandatory Markings)	-	100	5% discount to BIS
4.2.2(Standard Mark)	-	100	5% discount to BIS
4.2.3(Dichroic Reflectorized (Cool Beam) Lamps and Bowl Mirror Lamps)	-	100	5% discount to BIS
4.2.4(Lamps with Operating Positions Limitations)	-	100	5% discount to BIS
4.3, Table 1(Lamp Cap)	-	800	5% discount to BIS
4.3, Table 1(Gauge)	-	800	5% discount to BIS
4.3.1(E14 Capped Lamps)	-	800	5% discount to BIS
4.4.1(Average Cap Temperature Rise)	-	5000	5% discount to BIS
4.4.2(Compliance)	-	5000	5% discount to BIS
4.4.1, 4.4.2, Table 2(Group Number)	-	5000	5% discount to BIS
4.4.1, 4.4.2, Table 2(Wattage (Note 1))	-	5000	5% discount to BIS
4.4.1, 4.4.2, Table 2(Bulb Shape)	-	5000	5% discount to BIS
4.4.1, 4.4.2, Table 2(t3, B15d)	-	5000	5% discount to BIS
4.4.1, 4.4.2, Table 2(t3, B22d)	-	5000	5% discount to BIS
4.4.1, 4.4.2, Table 2(t3, E12)	-	5000	5% discount to BIS
4.4.1, 4.4.2, Table 2(t3, E14)	-	5000	5% discount to BIS
4.4.1, 4.4.2, Table 2(t3, E27)	-	5000	5% discount to BIS
4.4.3(Batch Testing)	-	5000	5% discount to BIS
4.5.1(Resistance to Torque, Caps)	-	1000	5% discount to BIS
4.5.2(Resistance to Torque, Unused Lamps)	-	1000	5% discount to BIS
4.5.2, Table 3(Cap type)	-	1000	5% discount to BIS
4.5.2, Table 3(Torque Value)	-	1000	5% discount to BIS
4.5.3(Resistance to Heat)	-	1000	5% discount to BIS
4.5.3, Table 4(Cap type)	-	5000	5% discount to BIS
4.5.3, Table 4(Torque Value)	-	1000	5% discount to BIS
4.5.4(Heating Treatment Temperatures)	-	1000	5% discount to BIS
4.6(Insulation Resistance of B15d, B22d and E27/51 × 39 Capped Lamps and Other Lamps having Insulated Skirts)	-	1000	5% discount to BIS
4.7.1(Metal Parts Intended to be Insulated from Live Parts)	-	1100	5% discount to BIS
4.7.2(Bayonet Caps)	-	1100	5% discount to BIS
4.7.3(Edison Screw Caps)	-	1100	5% discount to BIS
4.8(Creepage Distances for B15d and B22d Capped Lamps)	-	500	5% discount to BIS
4.9(Safety at End of Life)	-	10000	5% discount to BIS
4.1(Interchangeability)	-	1000	5% discount to BIS
4.10, Table 5(Lamp Cap)	-	1000	5% discount to BIS
4.10, Table 5(Cap Dimensions to be Checked by the Gauges)	-	1000	5% discount to BIS
4.10, Table 5(Data Sheet)	-	1000	5% discount to BIS

19 Mar, 2026

-
-

8710

Spectro Analytical Labs Private Limited, Gautam Buddha Nagar

8130426

IS/IEC 62368 : Part 1 (2018)

Audio / Video, Information and Communication Technology Equipment Part 1 Safety Requirements ( First Revision )

100000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4, 4.1, 4.1.1, 4.1.2, 4.1.3, 4.1.4, 4.1.5, 4.1.6, 4.1.7, 4.1.8, 4.1.9,4.1.10, 4.1.11,4.1.12, 4.1.13, 4.1.14,4.1.15(General Requirements)	-	5000	-
Cl. 4.2, 4.2.1, 4.2.2, 4.2.3, 4.2.4(Energy source classifications)	-	5000	-
Cl. No. 4.3 ,4.4,4.5, 4.6,4.7,4.8,4.9,4.10 with all sub clauses(Protection against energy sources)	-	5000	-
Cl. No. 5,5.1,5.2,5.3,5.4,5.5,5.6,5.7,5.8 with all sub clauses(Electrically-caused injury)	-	5000	-
Cl No. 6,6.1,6.2,6.3,6.4,6.5,6.6 with all sub clause(Electrically-caused fire)	-	5000	-
Cl. 7, 7.1, 7.2, 7.3, 7.4, 7.5, 7.6(Injury caused by hazardous substances)	-	5000	-
Cl. 8,8.1,8.2,8.3,8.4,8.5,8.6,8.7,8.8,8.9,8.10,8.11,8.12 with all sub clause(Mechanically-caused injury)	-	3000	-
Cl. 9, 9.1, 9.2, 9.2.1,9.2.2, 9.2.3, 9.3, 9.3.1, 9.3.2, 9.4, 9.5, 9.5.1, 9.5.2, 9.6, 9.6.1, 9.6.2, 9.6.3(Thermal burn injury)	-	6000	-
Annex. B, B.1, B.1.1, B.1.2, B.1.3, B.1.4, B.1.5,B.2,B.2.1, B.2.2, B.2.3, B.2.4, B.2.5, B.2.6, B.2.6.1, B.2.6.2, B.2.6.3, B.2.7, B.3, B.3.1, B.3.2, B.3.3, B.3.4, B.3.5, B.3.6, B.3.7, B.3.8, B.4, B.4.1, B.4.2, B.4.3, B.4.3.1, B.4.3.2,B.4.4, B.4.4.1, B.4.4.(Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	5000	-
Annex. D, D.1, D.2, D.3(Test Generators)	-	8000	-
Annex E, E.1, E.2, E.3(Test conditions)	-	5000	-
Annex. F, F.1, F.2, F2.1, F.2.2,F2.3,F.3, F.3.1, F.3.2, F.3.2.1,F.3.2.2, F.3.3,F.3.3.1, F.3.3.2,F.3.3.3, F.3.3.4, F.3.3.5, F.3.3.6,F.3.3.7, F.3.3.8, F.3.4, F.3.5, F.3.5.1,F.3.5.2, F.3.5.3, F.3.5.4, F.3.5.5,F.3.5.6, F.3.5.7,F.3.6, F.3.6.1, F.3.6.1.1, F.3.6(Equipment markings, instructions, and instructional safeguards)	-	2000	-
Annex. G, G.1, G.1.1, G.1.2, G.1.3, G.2, G.2.1, G.2.2, G.2.3, G.2.4, G.3, G.3.1, G.3.1.1, G.3.1.2, G.3.2, G.3.2.1,G.3.2.2, G.3.3,G.3.4, G.3.5, G.3.5.1, G.3.5.2, G.4, G.4.1, G.4.2, G.4.3, G.5, G.5.1, G.5.1.1, G.5.1.2,G.5.1.3,G.5.2,G.5.2.1, G.5.2.2, G.5.2.3(Components)	-	3000	-
Annex I(Overvoltage categories)	-	2000	-
Annex. J, J.1, J.2, J.2.1, J.2.2, J.2.2.1, J.2.2.1.1, J.2.2.1.2, J.2.2.1.3, J.2.2.2, J.2.3, J.2.4, J.2.5, J.3, J.3.1, J.3.2, J.3.3(Insulated winding wires for use without interleaved insulation)	-	4000	-
Annex. K, K.1, K.1.1, K.1.2, K.2, K.3, K.4, K.5, K.5.1, K.5.2, K.6, K.6.1, K.6.2, K.7, K.7.1, K.7.2, K.7.3, K.7.4(Safety Interlocks)	-	3000	-
Annex. L, L.1, L.2, L.3, L.4, L.5, L.6, L.7, L.8, L.9,(Disconnect devices)	-	2000	-
Annex. M, M.1, M.2, M.2.1, M.2.2, M.3, M.3.1, M.3.2, M.3.3, M.4, M.4.1, M.4.2,M.4.2.1, M.4.2.2,M.4.3, M.4.4,M.4.4.1, M.4.4.2,M.4.4.3, M.4.4.4, M.4.4.5, M.4.4.6, M.5, M.5.1, M.5.2, M.6, M.6.1, M.6.2, M.7, M.7.1, M.7.2, M.7.3, M.7.3.1,M.7.3.2, M.7.3.3, M.7.(Equipment containing batteries and their protection circuits)	-	2000	-
Annex. N(Electrochemical potentials)	-	2000	-
Annex. O(Measurement of creepage distances and clearances)	-	3000	-
Annex. P, P.1, P.2, P.2.1, P.2.2, P.2.3, P.2.3.1, P.2.3.2, P.3, P.3.1, P.3.2, P.3.3, P.3.4, P.4, P.4.1, P.4.2(Safeguards against conductive objects)	-	3000	-
Annex. Q, Q.1, Q.1.1, Q.1.2, Q.2(Circuits intended for interconnection with building wiring)	-	3000	-
Annex. R, R.1, R.2, R.3, R.4(Limited short-circuit test)	-	3000	-
Annex. S, S.1, S.2, S.3, S.3.1, S.3.2, S.4, S.5(Tests for resistance to heat and fire)	-	5000	-
Annex. T, T.1, T.2, T.3, T.4, T.5, T.6, T.7, T.8, T.9, T.10, T.11(Mechanical strength tests)	-	1000	-
Annex. V, V.1, V.1.1, V.1.2, V.1.3, V.1.4, V.1.5, V.1.6, V.2(Determination of accessible parts)	-	1000	-
Annex. X(Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420V peak (300V rms))	-	1000	-
Annex. Y, Y.1, Y.2, Y.3, Y.3.1, Y.3.2, Y.3.3, Y.3.4, Y.3.5, Y.4, Y.4.1 Y.4.2, Y.4.3, Y.4.4, Y.4.5, Y.5, Y.5.1, Y.5.2, Y.5.3, Y.5.4, Y.5.5, Y.5.5.1, Y.5.5.2, Y.5.5.3, Y.6, Y.6.1, Y.6.2(Construction requirements for outdoor enclosure)	-	1000	-
10(Radiation)	-	1000	-
Annex C, C.1 & C.2(UV radiation)	-	1000	-
Cl. 4, 4.1, 4.1.1, 4.1.2, 4.1.3, 4.1.4, 4.1.5, 4.1.6, 4.1.7, 4.1.8, 4.1.9,4.1.10, 4.1.11,4.1.12, 4.1.13, 4.1.14,4.1.15(General Requirements)	-	3000	-
Cl. 4.2, 4.2.1, 4.2.2, 4.2.3, 4.2.4(Energy source classifications)	-	5000	-
Cl. No. 4.3 ,4.4,4.5, 4.6,4.7,4.8,4.9,4.10 with all sub clauses(Protection against energy sources)	-	5000	-
Cl. No. 5,5.1,5.2,5.3,5.4,5.5,5.6,5.7,5.8 with all sub clauses(Electrically-caused injury)	-	5000	-
Cl No. 6,6.1,6.2,6.3,6.4,6.5,6.6 with all sub clause(Electrically-caused fire)	-	3000	-
Cl. 7, 7.1, 7.2, 7.3, 7.4, 7.5, 7.6(Injury caused by hazardous substances)	-	3000	-
Cl. 8,8.1,8.2,8.3,8.4,8.5,8.6,8.7,8.8,8.9,8.10,8.11,8.12 with all sub clause(Mechanically-caused injury)	-	3000	-
Cl. 9, 9.1, 9.2, 9.2.1,9.2.2, 9.2.3, 9.3, 9.3.1, 9.3.2, 9.4, 9.5, 9.5.1, 9.5.2, 9.6, 9.6.1, 9.6.2, 9.6.3(Thermal burn injury)	-	3000	-
Annex. B, B.1, B.1.1, B.1.2, B.1.3, B.1.4, B.1.5,B.2,B.2.1, B.2.2, B.2.3, B.2.4, B.2.5, B.2.6, B.2.6.1, B.2.6.2, B.2.6.3, B.2.7, B.3, B.3.1, B.3.2, B.3.3, B.3.4, B.3.5, B.3.6, B.3.7, B.3.8, B.4, B.4.1, B.4.2, B.4.3, B.4.3.1, B.4.3.2,B.4.4, B.4.4.1, B.4.4.(Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	3000	-
Annex. D, D.1, D.2, D.3(Test Generators)	-	3000	-
Annex E, E.1, E.2, E.3(Test conditions)	-	3000	-
Annex. F, F.1, F.2, F2.1, F.2.2,F2.3,F.3, F.3.1, F.3.2, F.3.2.1,F.3.2.2, F.3.3,F.3.3.1, F.3.3.2,F.3.3.3, F.3.3.4, F.3.3.5, F.3.3.6,F.3.3.7, F.3.3.8, F.3.4, F.3.5, F.3.5.1,F.3.5.2, F.3.5.3, F.3.5.4, F.3.5.5,F.3.5.6, F.3.5.7,F.3.6, F.3.6.1, F.3.6.1.1, F.3.6(Equipment markings, instructions, and instructional safeguards)	-	3000	-
Annex. G, G.1, G.1.1, G.1.2, G.1.3, G.2, G.2.1, G.2.2, G.2.3, G.2.4, G.3, G.3.1, G.3.1.1, G.3.1.2, G.3.2, G.3.2.1,G.3.2.2, G.3.3,G.3.4, G.3.5, G.3.5.1, G.3.5.2, G.4, G.4.1, G.4.2, G.4.3, G.5, G.5.1, G.5.1.1, G.5.1.2,G.5.1.3,G.5.2,G.5.2.1, G.5.2.2, G.5.2.3(Components)	-	3000	-
Annex I(Overvoltage categories)	-	3000	-
Annex. J, J.1, J.2, J.2.1, J.2.2, J.2.2.1, J.2.2.1.1, J.2.2.1.2, J.2.2.1.3, J.2.2.2, J.2.3, J.2.4, J.2.5, J.3, J.3.1, J.3.2, J.3.3(Insulated winding wires for use without interleaved insulation)	-	3000	-
Annex. K, K.1, K.1.1, K.1.2, K.2, K.3, K.4, K.5, K.5.1, K.5.2, K.6, K.6.1, K.6.2, K.7, K.7.1, K.7.2, K.7.3, K.7.4(Safety Interlocks)	-	3000	-
Annex. L, L.1, L.2, L.3, L.4, L.5, L.6, L.7, L.8, L.9,(Disconnect devices)	-	3000	-
Annex. M, M.1, M.2, M.2.1, M.2.2, M.3, M.3.1, M.3.2, M.3.3, M.4, M.4.1, M.4.2,M.4.2.1, M.4.2.2,M.4.3, M.4.4,M.4.4.1, M.4.4.2,M.4.4.3, M.4.4.4, M.4.4.5, M.4.4.6, M.5, M.5.1, M.5.2, M.6, M.6.1, M.6.2, M.7, M.7.1, M.7.2, M.7.3, M.7.3.1,M.7.3.2, M.7.3.3, M.7.(Equipment containing batteries and their protection circuits)	-	3000	-
Annex. N(Electrochemical potentials)	-	3000	-
Annex. O(Measurement of creepage distances and clearances)	-	3000	-
Annex. P, P.1, P.2, P.2.1, P.2.2, P.2.3, P.2.3.1, P.2.3.2, P.3, P.3.1, P.3.2, P.3.3, P.3.4, P.4, P.4.1, P.4.2(Safeguards against conductive objects)	-	3000	-
Annex. Q, Q.1, Q.1.1, Q.1.2, Q.2(Circuits intended for interconnection with building wiring)	-	3000	-
Annex. R, R.1, R.2, R.3, R.4(Limited short-circuit test)	-	3000	-
Annex. S, S.1, S.2, S.3, S.3.1, S.3.2, S.4, S.5(Tests for resistance to heat and fire)	-	3000	-
Annex. T, T.1, T.2, T.3, T.4, T.5, T.6, T.7, T.8, T.9, T.10, T.11(Mechanical strength tests)	-	3000	-
Annex. V, V.1, V.1.1, V.1.2, V.1.3, V.1.4, V.1.5, V.1.6, V.2(Determination of accessible parts)	-	3000	-
Annex. X(Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420V peak (300V rms))	-	3000	-
Annex. Y, Y.1, Y.2, Y.3, Y.3.1, Y.3.2, Y.3.3, Y.3.4, Y.3.5, Y.4, Y.4.1 Y.4.2, Y.4.3, Y.4.4, Y.4.5, Y.5, Y.5.1, Y.5.2, Y.5.3, Y.5.4, Y.5.5, Y.5.5.1, Y.5.5.2, Y.5.5.3, Y.6, Y.6.1, Y.6.2(Construction requirements for outdoor enclosure)	-	3000	-
10(Radiation)	-	3000	-
Annex C, C.1 & C.2(UV radiation)	-	3000	-

04 Jan, 2027

-
Included w.e.f. 15.07.2024

8711

RTRC LIMITED, GURUGRAM

9177406

IS 17048 (2018)

Halogen free flame retardant (HFFR) cables for working voltages up to and including 1 100 Volts - Specification

89000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1 a) (Conductor : Material )	-	0	Complete Testing Charges : Rs. 89000/- For Single core unsheathed cable Rs. 172500/- for Single core sheathed cable. Additional charge, Rs. 2000 /- For each additional core
4.1.1 b) (Material : Seperator tape )	-	0	-
4.1.1 d) , 11.1, 12.1, 13.1,14.1(Class of conductor )	-	0	-
4.1.1 e) (Shape of conductor )	-	0	-
4.1.1 f) (Nominal size of conductor )	-	0	-
4.2.1, 11.2, 12.2, 13.2, 14.2(Insulation : Material )	-	0	-
4.2.2, 11.2, 12.2, 13.2, 14.2(Insulation : Application )	-	0	-
4.2.3,11.2, 12.2, 13.2(Thickness of insulation - Avearge : IS 10810 ( Part 6 ))	-	1000	-
4.2.3, 11.2, 12.2, 13.2, 14.2(Thickness of insulation - miniumum : IS 10810 ( Part 6 ))	-	0	-
4.2.4(Insulation : Tensile stregth ( Before ageing)-IS 10810 (Part 7) )	-	0	-
4.2.4(Insulation : Elongation ( Before ageing) -IS 10810 (Part 7))	-	1500	-
4.2.4(Insulation : Tensile stregth ( After ageing) - IS 10810 (Part 7) )	-	1500	-
4.2.5(Insulation : Tensile stregth variation ( After ageing) - IS 10810 (Part 7) )	-	0	-
4.2.4(Insulation : Elongation (after ageing) - IS 10810 (Part 7) )	-	1500	-
4.2.5(Insulation : Elongation variation (after ageing) - IS 10810 (Part 7) )	-	0	-
4.3(Fillers)	-	0	-
4.4(Binder Tape)	-	0	-
4.5.1,13.4, 14.4(Sheath : Compound )	-	0	-
4.5.2, 13.4, 14.4(Sheath : Application)	-	0	-
4.5.3,13.4, 14.4(Thickness of sheath - Average : IS 10810 (Part 6))	-	0	-
4.5.3,13.4, 14.4(Thickness of sheath - Minimum : IS 10810 (Part 6))	-	0	-
4.5.4, 13.4(Sheath : Tensile stregth ( Before ageing)-IS 10810 (Part 7) )	-	1500	-
4.5.4,13.4(Sheath : Elongation ( Before ageing) -IS 10810 (Part 7))	-	1500	-
4.5.4, 13.4, 14.4(Sheath : Tensile stregth ( After ageing) - IS 10810 (Part 7) )	-	1500	-
4.5.5, 13.4, 14.4(Sheath : Tensile stregth variation ( After ageing) - IS 10810 (Part 7) )	-	5000	-
4.5.4, 13.4, 14.4(Sheath : Elongation (after ageing) - IS 10810 (Part 7) )	-	1500	-
4.5.5, 13.4,14.4(Sheath : Elongation variation (after ageing) - IS 10810 (Part 7) )	-	0	-
4.5.5, 11.3, 12.3, 13.6, 14.6(Overall Dimensions)	-	1000	-
4.5.5.1, 11.3, 12.3,13.5, 14.5(Ovality)	-	0	-
4.5.6, 13.4(Colour of Sheath)	-	0	-
5.1(High Voltage Test (at Room Temperature))	-	2500	-
5.2(Spark Test (Routine Test))	-	0	-
5.3(Flammability Test- IS 10810 (Part 53).)	-	2500	-
5.4(Oxygen Index Test- IS 10810 (Part 58))	-	2500	As applicable
5.5(Temperature Index-IS 10810 (Part 64).)	-	2500	As applicable
5.6(Smoke Density-IS 10810 (Part 63).)	-	10000	Smoke density test (3-meter cube)
5.7(Assessment of Halogen- Table 1 of Annex D)	-	35000	-
5.1(Persulphate Test- IS 10810 (Part 4).)	-	1000	As applicable
5.11(Flame Retardant Test- IS 10810 (Part 61),)	-	2500	-
5.12(Hot Set Test- IS 10810 (Part 30).)	-	1500	-
5.12(Permanent Set - IS 10810 (Part 30).)	-	0	-
5.13(Water Immersion Test (Effect of Water on Sheath) : Tensile strength -IS 10810 (Part 7).)	-	4500	As applicable
5.13(Water Immersion Test (Effect of Water on Sheath) : Elogation -IS 10810 (Part 7).)	-	0	-
5.14(Ozone Resistance Test -IS 10810 (Part 13 ))	-	12500	-
5.15(Cold Bend Test-IS 10810 (Part 20).)	-	1500	As applicable
5.16(Cold Impact Test- IS 10810 (Part 21).)	-	1500	As applicable
6.1, Table 1(CORE IDENTIFICATION)	-	0	-
6.2(Core Identification by Numbers)	-	0	-
6.2.1(Preferred Arrangement of Marking)	-	0	-
6.2.2(Durability)	-	0	-
7.0(CABLE CODE)	-	0	-
9.0( IDENTIFICATION)	-	0	-
10.1(Packing )	-	0	-
10.2(marking)	-	0	-
10.2.1(Standards marking)	-	0	-
13.3, 14.3(assembly of cores )	-	0	-
6.1(General Requirements)	-	0	-
6.1.1(Colour Combination Green Yellow)	-	0	-
12.1(Conductor)	-	0	-
12.2, Table 4(insulation)	-	0	-
Table 4(Copper Purity test)	-	9000	As applicable
4.3.1 (e)(Fluorine content test (Fillers))	-	15000	As applicable
4.3.1 (d)(Presence of fluorine test (Fillers))	-	6000	As applicable
4.3.1 (c)(Conductivity test (Fillers))	-	4000	As applicable
4.3.1 (b)(pH test (Fillers))	-	4000	As applicable
4.3.1 (a)(HCl test (Fillers))	-	6000	As applicable
5.7 (a)(HCl test (Assessment of halogen test))	-	0	As applicable
5.7 (b)(pH test (Assessment of halogen test))	-	4000	As applicable
5.7 (c)(Conductivity test (Assessment of halogen test))	-	4000	As applicable
5.7 (d)(Presence of fluorine test (Assessment of halogen test))	-	6000	As applicable
5.7 (e)(Fluorine content test (Assessment of halogen test))	-	15000	As applicable
Table 2 ,( Clause 11.4, 12.4, 13.7 14.7 and 15.7 )(Insulation Resistance)	-	2000	-
"Table 2 ( Clause 11.4, 12.4, 13.7 14.7 and 15.7 )"(Conductor Resistance)	-	1000	-
Table 2 , Clause .5.13(Water immersion test (Effect of water on sheath) - TS Variation of Sheath)	-	4500	As applicable
Table 2 , Clause 5.13(Water immersion test (Effect of water on sheath) - Elongation Variation of Sheath)	-	0	-
"Table 2 ( Clause 11.4, 12.4, 13.7 14.7 and 15.7 )"(Hot Deformation)	-	1500	-
Table 2, III.a.ii(Annealing test (for Cu, before stranding))	-	1000	-
Table 2, II.a, b(Wrapping test before stranding (for Al))	-	0	-

03 Apr, 2027

-
-

8712

Spectro Analytical Labs Private Limited, Gautam Buddha Nagar

8130426

IS 16047 : Part 3 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Secondary Lithium Cells and Batteries for Portable Applications Part 3 Prismatic and Cylindrical Lithium Secondary Cells, and Batteries Made From Them ( First Revision )

330000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Cell Designation and Marking)	-	5000	-
7.1, 7.2(Charging Procedure for Test Purpose)	-	50000	-
7.3.1(Discharge Performance at 20°C (Rated Capacity))	-	25000	-
7.3.2("Discharge Performance at -20°C ")	-	25000	-
7.3.3(High Rate Discharge Performance at 20°C)	-	25000	-
7.4(Charge (capacity) Retention and Recovery)	-	30000	-
7.5(Charge (Capacity) Recovery After Long Term Storage)	-	30000	-
7.6.2(Endurance In Cycles at a Rate of 0.2It A)	-	50000	-
7.6.3("Endurance in Cycles at a Rate of 0.5It A (Accelerated Test Procedure) ")	-	50000	-
7.7(Battery Internal Resistance)	-	20000	-
7.8(Electrostatic Discharge (ESD))	-	20000	-

04 Jan, 2027

-
Included w.e.f. 25.04.2024

8713

MICRO ENGINEERING AND TESTING LABORATORY OPC PRIVATE LIMITED, SONIPAT

9186006

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

High Strength Deformed Steel Bars and Wires

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON +EQUIVELENT )	-	300	-
4.1(Sulphur and phosphorous)	-	500	-
4.1(CE)	-	300	-
4.1( Nitrogen%)	-	300	-
4.1(Ni)	-	300	-
4.1(Mo)	-	300	-
4.1(Cr)	-	300	-
4.1( Ti)	-	300	-
4.1(V)	-	300	-
4.1( Nb)	-	300	-
4.1( Aluminium %)	-	300	-
4.1( Copper %)	-	300	-
4.1(Silicon %)	-	300	-
4.1(Sulphur %)	-	300	-
4.1(Phosphorus %)	-	300	-
4.1(Manganese %)	-	300	-
4.1(Carbon %)	-	300	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR+PHOSPHUR)	-	800	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 MANGANESE)	-	800	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 NITROGEN)	-	800	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 PHOSPHURS)	-	800	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR)	-	800	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON )	-	800	-
Cl.4.2 of IS 1786 (Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl.4.2 of IS 1786 (Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl.4.2 of IS 1786 (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl.4.2 of IS 1786 (Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl.4.2 of IS 1786 (Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl.4.2 of IS 1786 (Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl.4.2 of IS 1786 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl.4.2 of IS 1786 (Grade:- Fe 415D,Fe 415S, Fe 500D,Fe 500S,Fe 550D)(Carbon Equivalent)	-	300	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur & Phosphorous)	-	500	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Phosphorous- IS 228)	-	300	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur-IS 228)	-	300	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Carbon-IS 228)	-	300	-
4.2(Niobium (Nb))	-	300	-
4.2(Boron (B))	-	300	-
Clause 4.2 Note 2, Amendment 1 & 3(Nb+V+B+Ti)	-	0	-
Clause 4.2 Note 3, Amendment 1 & 3(Cr+Cu+Ni+Mo+P)	-	1500	-
Clause 4.2, Amendment 3 Note 4("In order to ascertain whether sufficient quantities of nitrogen binding elements are present, following formula may be used, where all elements are in ppm. (N−120)< (Al free/10)+((Ti+V)/7)+(Nb/14)")	-	1500	-
1()	-	0	-
Cl 9.4(Load In Other Direction From Bend)	-	400	-
Cl 9.3(Load In One Direction)	-	400	-
Cl 7.2(Weight)	-	250	-
Cl 6.1(Length, Width & Thickness)	-	400	-
Cl 5(Deformations and Surface Characteristics)	-	0	-
Cl 9.4(Load In Other Direction From Bend)	-	400	-
Cl 9.3(Load In One Direction)	-	400	-
Cl 7.2(Weight)	-	250	-
Cl 6.1(Length, Width & Thickness)	-	400	-
Cl 5(Deformations and Surface Characteristics)	-	0	-
Cl.9.4 & Cl. 9.4.1(Rebend test)	-	400	-
Cl. 9.3, Table 4(Bend Test )	-	400	-
Cl. 8.1 Table 3(Elongation, percentage)	-	800	-
Cl. 8.1 Table 3(TS/YS ratio)	-	400	-
Cl. 8.1 Table 3(Tensile Strength (TS))	-	1100	-
Cl. 8.1 Table 3(Yield Stress (YS))	-	500	-
Cl. 7.2 Table -2 (Nominal Mass)	-	250	-
Cl. 6.1(Nominal Size)	-	250	-
Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar))	-	800	-
Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), )	-	800	-
8.18.1 Table 3(Total elongation at maximum force)	-	500	-
Cl 5(Deformations and Surface Characteristics)	-	0	-
5.7(PullOut (Bond Test))	-	0	-
Cl. 8.1 Table 3(TS/YS Ratio)	-	400	-
Cl. 5.3 (b)(The ribs contributing the projected area - Transverse Ribs)	-	400	-
Cl. 5.3 (a)(The ribs contributing the projected area - Longitudinal Ribs)	-	400	-
Cl. 8.1 Table 3(Maximum Extension)	-	500	-
Cl. 8.1 Table 3(Total Elongation at Maximum Force)	-	500	-
Cl. 6.2, 6.3 Table 1(Gross Cross Sectional Area, A)	-	250	-
Cl. 4.3(Visual Inspection.)	-	250	-
Cl. 5.2(Surface Characteristics)	-	250	-
Clause 9.4(Rebend Test)	-	400	-
Clause 6.3(Effective Cross-sectional Area)	-	250	-
Clause 8.1(Table 3)(Total Elongation at Maximum Force)	-	500	-
Cl 9.4(Load In Other Direction From Bend)	-	400	-
Cl 9.3(Load In One Direction)	-	400	-
Cl 7.2(Weight)	-	250	-
Cl 6.1(Length, Width & Thickness)	-	400	-
Cl 5(Deformations and Surface Characteristics)	-	0	-
Cl 5(Deformations and Surface Characteristics)	-	0	-
Cl 6.1(Length, Width & Thickness)	-	400	-
Cl 7.2(Weight)	-	250	-
Cl 8.1(UTM)	-	2000	-
Cl 9.3(Load In One Direction)	-	400	-
Cl 9.4(Load In Other Direction From Bend)	-	400	-
13(Identification and marking)	-	300	-
5.7(Pull-out test - IS:2770(P1))	-	0	-
7.0 & 7.1(Specified lengths - SOP MT-23)	-	500	-
8.0 & 8.1("Total elongation at maximum force on 5.65 vSo mm GL. ")	-	500	-
4.3(Rolling and cold working of bars/wire)	-	0	-
7.1(Specified length)	-	500	-
9.1(Preparation of test sample)	-	200	-
9.2(Tensile test,IS:1608(Pt1)-2018)	-	1100	-
9.5(Retest)	-	0	-
12(Inspection)	-	300	-
Cl 8.1(UTM)	-	2000	-
Cl 8.1(UTM)	-	2000	-
Cl 8.1(UTM)	-	2000	-
Cl 8.1(UTM)	-	2000	-
Cl 9.3(Load In One Direction)	-	400	-
Cl 7.2(Weight)	-	250	-
Cl 6.1(Length, Width & Thickness)	-	400	-
Cl 9.4(Load In Other Direction From Bend)	-	400	-
Cl 5(Deformations and Surface Characteristics)	-	0	-

04 Jun, 2028

-
-

8714

RTRC LIMITED, GURUGRAM

9177406

IS 17293 (2020)

Electric Cables for Photovoltaic Systems for Rated Voltage 1 500 V d.c.

1213700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	750	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	750	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	1000	-
Annex G and Table 3 of IS 17293:2020(Ozone Resistance test)	-	14500	-
IS 191 : 2007, IS 440(Copper purity test)	-	1200	-
Table 3 of IS 17293:2020 & IS 10810 (Part 63)(Smoke density test.)	-	11000	Smoke density test (3-meter cube)
Cl 6.4.3 and Table 3 of IS 8130(Diameter of wire in conductor)	-	500	-
Table-3 & Annex-F of IS 17293:2020 and IS 10810 (Part 7) 1984(Elongation at low temperature (Cold Elongation))	-	7500	-
Annex H and Table 3 of IS 17293:2020(Damp Heat test)	-	140000	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	1500	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	1000	-
Cl 11.2.3 & Table-3 of IS 17293:2020 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	1500	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	4000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(IS 17293)	-	4000	For Conductivity Test
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	6000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	21000	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(IS 10810-30)	-	1500	For Hot Set Test
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	385000	-
Annex D and Table 3 of IS 17293:2020(Dynamic Penetration test)	-	5000	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	16000	-
Annex C of IS 17293:2020 & IS:10810 (Part 21)-1984(Cold impact test)	-	1500	-
Annex - B of IS 17293:2020(Compatibility test)	-	5500	-
Table 3 of IS 17293:2020 & IS:10810 (Part 20)-1984(Cold bend test)	-	1500	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	1000	-
Cl 5.3 of IS 17048:2018 & IS:10810 (Part 53)-1984(Flammability Test)	-	3000	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	1000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Conductivity)	-	4000	-
Cl 11.2.1 of IS 17293:2020 & IS:10810 (Part 45)-1984(High voltage test)	-	2500	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	21000	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	4000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	6000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(Hot set test)	-	1500	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	385000	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	0	-
Annex - B of IS 17293:2020(Compatibility test)	-	0	-
Table 3 of IS 17293:2020 & IS:10810 (Part 12)-1984(Shrinkage test)	-	1000	-
Annex - E of IS 17293 : 2020(UV resistance)	-	108000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(pH)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Conductivity)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(HCl and HBr)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	0	-
11.2.2(Spark Test)	-	4500	-
11.2.4(Long-term Resistance of Insulation to d.c.)	-	8500	-
11.2.5(Surface Resistance of Sheath)	-	4000	-
11.3.1(Sheath Colour)	-	0	-
11.3.2(Sheath Marking)	-	0	-
11.3.3(Overall Diameters and Ovality)	-	1000	-
Annex J(Assessment of Halogens)	-	0	-
5.1, 6.1, Table 11, 1.1(Properties before ageing b)	-	0	-
5.1, 6.1, Table 11, 1.2(Properties after ageing in oven)	-	0	-
5.1, 6.1, Table 11, 1.3(Hot set test b)	-	0	-
5.1, 6.1, Table 11, 1.4(Thermal endurance Test conditions b)	-	0	-
5.1, 6.1, Table 11, 1.5(Bending at low temperature)	-	5500	-
5.1, 6.1, Table 11, 1.6(Elongation at low temperature Insulated conductor/cable overall diameter)	-	7500	-
5.1, 6.1, Table 11, 1.7(Sheath resistance against acid and alkaline solution)	-	0	-
5.1, 6.1, Table 11, 1.8(Compatibility test)	-	0	-
5.2(Application to the Conductor)	-	0	-
5.3(Thickness)	-	0	-
6.2(Sheath application)	-	0	-
6.3(Sheath Thickness)	-	0	-
6.4(Sheath Colour)	-	0	-
7(Overall Dimension)	-	0	-
8.1(Continuity of Marking)	-	500	-
8.2(Durability)	-	1000	-
8.3(Legibility)	-	1000	-
9(Core Identification)	-	0	-
12(Packing and Marking)	-	0	-
4.1(Resistance)	-	0	-
7.1.2.1, 7.2.3(Annealing)	-	0	-
Table 3, (IS 10810 Part 53)(Test for vertical flame propagation on complete cable)	-	0	-

03 Apr, 2027

-
-

8715

Hi Physix Laboratory India Private Limited, Pune

7126926

IS 17681 (2022)

Specification for Bottled water dispensers

240000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Construction)	-	0	Charges added subcluases
4.1(General Design)	-	500	-
4.3(Finish)	-	500	-
4.4(Thermal Insulation)	-	500	-
4.5(Hardware)	-	500	-
4.6(Disposal of Waste Water)	-	500	-
4.7(Hot Water Tank)	-	500	-
4.8(Hermetically Sealed Compressor)	-	500	-
4.9(Protective Guards)	-	500	-
5(Refrigeration System)	-	0	Charges added subcluases
5.1(Pipes and Connections/Fitting)	-	500	-
5.2(Control of Operation)	-	500	-
6.1(General)	-	1000	-
6.1(Protection against electric shock (Cl. 8 of IS 302-2-24))	-	3000	-
6.1(Power Input & Current (Cl. 10 of IS 302-2-24))	-	5000	-
6.1(Temperature Rise/ Heating (Cl. 11 of IS 302-2-24))	-	6000	-
6.1("Insulation Resistance and Electric Strength/ Leakage Current and Electric Strength (Cl. 13 of IS 302-2-24)")	-	5000	-
6.1("Moisture Resistance (Cl. 15 of IS 302-2-24)")	-	12000	-
6.1("Insulation resistance and electric strength (After humidity treatment) (Cl. 16 of IS 302-2-24)")	-	5000	-
6.1("Provision For Earthing (Cl. 27 of IS 302-2-24)")	-	3000	-
6.1("Screws & Connections (Cl. 28 of IS 302-2-24)")	-	3000	-
6.2(Electrical Accessories)	-	1000	-
6.3(Salt Mist Test)	-	25000	-
7(Sound pressure level)	-	15000	-
10.1(Cooling Capacity Test)	-	20000	-
10.2(Maximum Operating Condition Test (Environmental))	-	15000	-
10.3(Maximum Operating Condition Test (Voltage))	-	15000	-
10.4(Heating Capacity Test)	-	20000	-
10.5(Annual Energy Consumption Test)	-	30000	-
10.6(Freeze-up Test)	-	20000	-
10.7(Door Opening and Closing Test)	-	10000	-
10.8(Door Seal Test)	-	3000	-
10.9(Pull-down Test)	-	15000	-
11(Marking and instruction)	-	2000	-
4.2(Materials)	-	1000	-

20 Jun, 2028

-
Included w.e.f. 19.03.2024

8716

RTRC LIMITED, GURUGRAM

9177406

IS 9968 : Part 2 (2002)

Specification for elastomer - Insulated cables: Part 2 for working voltages from 3.3 kV up to and including 33 kV (First Revision)

210000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(CONDUCTORS: Cables for Fixed Installation)	-	0	-
4.2(CONDUCTORS:Flexible Cables)	-	0	-
5(INSULATION)	-	0	-
6(SEMICONDUCTING COMPOUND)	-	0	-
7.1(Proofed Tape)	-	0	-
7.1(Proofed Tape: Thickness)	-	1000	-
7.2(Polyethylene Terephthalate ( P E T P ) or Polypropylene Base Tape : Thickness)	-	1000	-
7.3(Tape )	-	0	-
8(SCREENING)	-	0	-
9(CENTRE AND FILLERS)	-	0	-
10(ARMOUR)	-	0	-
11.1(Inner Sheath)	-	0	-
11.2(Outer Sheath)	-	0	-
12.1(Tapes)	-	0	-
12.2(Cords and Yarns)	-	0	-
13.1 & 13.2(CONSTRUCTION:CONDUCTORS-Cables for Fixed Installations/Flexible Cables)	-	0	-
13.3(Earthing Conductor)	-	0	-
13.3.1(Earthing Conductor)	-	0	-
13.4(Separator Tape)	-	0	-
14(CONDUCTOR SCREENING)	-	0	-
15.1(INSULATION : Application)	-	30000	Additional Charge, Rs 30,000/- for each additional core.
15.2(Thickness of Insulation)	-	1000	-
15.3(Tolerance on Thickness of Insulation)	-	0	-
16.1(INSULATION SCREENING : Application)	-	0	-
16.2(INSULATION SCREENING : Parts )	-	0	-
16.3(INSULATION SCREENING : Non Metallic Parts )	-	0	-
16.4(INSULATION SCREENING : Metallic Parts )	-	0	-
17(CORE IDENTIFICATION)	-	0	-
17(CORE IDENTIFICATION: Unscreed cable )	-	0	-
18.1(LAYING UP OF CORES)	-	0	-
18.2(LAYING UP OF CORES : Flexible cable)	-	0	-
18.3(LAYING UP OF CORES : Binder Tape)	-	0	-
19.1(Inner Sheath : Application)	-	0	-
19.2(Thickness of Inner Sheath)	-	1000	-
19.3(Inner Sheath : proofed tape)	-	0	-
20.1(ARMOURING: Application)	-	0	-
20.2(Type of Armour)	-	0	-
20.2 1.2(Direction of lay of armour)	-	0	-
20.2 1.3(Joint in armour)	-	0	-
20.2.2(Filling Factot )	-	0	-
20.2.2(Diameter of braiding)	-	1000	-
20.2.2.1(Braiding material)	-	0	-
20.3(Substitution of the galvanized steel wires/formed)	-	0	-
21.1(OUTER SHEATH)	-	0	-
21.2(Coulor of Outer sheath)	-	0	-
21.3(Thickness of Outer Sheat: Average)	-	1000	-
21.3(Thickness of Outer Sheat: Minimum)	-	0	-
22.1 a)1)(Annealing test (for copper) - IS 10810: Part 1)	-	1500	as applicable
22.1 a)2)(Tensile test (for aluminium) -IS 10810: Part 2)	-	1500	as applicable
22.1 a)3)(Wrapping Test (for aluminium) - IS 10810: Part 3)	-	1000	-
22.1 a)4)(Conductor resistance test)	-	2500	-
22.1 a)5)(Persulphate test (tinned copper conductor)- IS 10810: Part 4)	-	1500	as applicable
22.1 b)1)(Test for Galvanized Steel Wires/Formed Wires 1) Dimensions -IS 10810: Part 36)	-	1000	-
22.1 b)2)i)(Test for Galvanized Steel Wires/Formed Wires 2) Tensile Strentgh -IS 10810: Part 37)	-	1000	-
22.1 b)2)ii)(Test for Galvanized Steel Wires/Formed Wires 2) Elongation at break -IS 10810: Part 37)	-	1000	-
22.1 b)2)iii)(Test for Galvanized Steel Wires/Formed Wires 3) Torsion (for round wires only) -IS 10810: Part 38)	-	1000	-
22.1 b)2)iv)(Test for Galvanized Steel Wires/Formed Wires 4) Winding (for strips only) -IS 10810: Part 39)	-	1000	-
22.1 b)2)v)(Test for Galvanized Steel Wires/Formed Wires 5) Zinc coating : Uniformity-IS 10810: Part 40)	-	2500	-
22.1 b)2)vi)(Test for Galvanized Steel Wires/Formed Wires 5) Zinc coating : Mass -IS 10810: Part 41)	-	2500	-
22.1 b)2) vii) (Resistivity - IS 10810: Part 42)	-	1500	-
22.1 c)2)(Physical Tests for Insulation : Tensile Strenth - IS 10810: Part 7)	-	1500	-
22.1 c)2)(Physical Tests for Insulation : Elongation - IS 10810: Part 7)	-	1500	-
22.1 c)2)(Physical Tests for Sheath : Tensile Strenth - IS 10810: Part 7)	-	1500	-
22.1 c)2)(Physical Tests for Sheath : Elongation - IS 10810: Part 7)	-	1500	-
22.1 c)3)(Physical Tests for Insulation ( Ageing in air oven): Tensile Strenth - IS 10810: Part 11)	-	2500	-
22.1 c)3)(Physical Tests for Insulation ( Ageing in air oven): Tensile Strenth Variation - IS 10810: Part 12)	-	0	-
22.1 c)3)(Physical Tests for Insulation( Ageing in air oven) : Elongation - IS 10810: Part 11)	-	2500	-
22.1 c)3)(Physical Tests for Insulation( Ageing in air oven) : Elongation variation - IS 10810: Part 12)	-	0	-
22.1 c)3)(Physical Tests for Sheath( Ageing in air oven) : Tensile Strenth - IS 10810: Part 11)	-	2500	-
22.1 c)3)(Physical Tests for Sheath( Ageing in air oven) : Tensile Strenth variation - IS 10810: Part 12)	-	0	-
22.1 c)3)(Physical Tests for Sheath ( Ageing in air oven): Elongation - IS 10810: Part 11)	-	2500	-
22.1 c)3)(Physical Tests for Sheath ( Ageing in air oven): Elongation variation - IS 10810: Part 12)	-	0	-
22.1 c)4)(Physical Tests for Insulation ( Ageing in air bomb): Tensile Strenth variation - IS 10810: Part 56)	-	2500	-
22.1 c)4)(Physical Tests for Insulation( Ageing in air bomb) : Elongation variation - IS 10810: Part 56)	-	2500	-
22.1 c)4)(Physical Tests for Sheath(Ageing in air bomb) : Tensile Strenth variation - IS 10810: Part 56)	-	2500	-
22.1 c)4)(Physical Tests for Sheath ( Ageing in air bomb): Elongation variation - IS 10810: Part 56)	-	2500	-
22.1 c)5)(Physical Tests for Insulation :Hot set Elongation - IS 10810: Part 30)	-	4000	-
22.1 c)5)(Physical Tests for Insulation :Permanent set - IS 10810: Part 30)	-	0	-
22.1 c)5)(Physical Tests for Sheath :Hot set Elongation - IS 10810: Part 30)	-	5000	-
22.1 c)5)(Physical Tests for Sheath :Permanent set - IS 10810: Part 30)	-	0	-
22.1 c)6)(Physical Tests for Sheath(Oil resistance test) : Tensile Strenth Variation - IS 10810: Part 31)	-	3000	-
22.1 c)6)(Physical Tests for Sheath ( Oil resistance test): Elongation Variation - IS 10810: Part 31)	-	3000	-
22.1 c)7)(Tear Resistance test - IS 10810: Part 17)	-	5500	-
22.1 c)8)(Shrinkage : Insulation - IS 10810: Part 12)	-	3500	-
22.1 c)8)(Shrinkage test- Crack observed : Insulation - IS 10810: Part 13)	-	0	-
22.1 c)8)(Shrinkage test : Sheath - IS 10810: Part 12)	-	3000	-
22.1 c)8)(Shrinkage test - Crack oberved : Sheath - IS 10810: Part 13)	-	0	-
22.1 c)9)(Hot deformation test : Insulation - IS 10810: Part 15)	-	2500	-
22.1 c)9)(Hot deformation test : Sheath - IS 10810: Part 15)	-	2500	-
22.1 c)10)(Loss of mass in air oven : Insulation - IS 10810: Part 10)	-	3000	-
22.1 c)10)(Loss of mass in air oven : Sheath - IS 10810: Part 10)	-	3500	-
22.1 c)11)(Heat shock : Insulation - IS 10810: Part 14)	-	2500	-
22.1 c)11)(Heat shock : Sheath - IS 10810: Part 14)	-	2500	-
22.1 c)12)(Thermal stability : Insulation - IS 10810: Part 60)	-	1000	-
22.1 c)12)(Thermal stability : Sheath - IS 10810: Part 60)	-	1000	-
22.1 d)(Insulation Resistance Test: Volume resistivity )	-	3500	-
22.1 d)(Insulation Resistance Test: Insulation resistance constant )	-	0	-
22.1 e)(Partial Discharge Test)	-	18000	-
22.1 f)(Bending Test Followed by Partial Discharge Test)	-	0	-
22.1 g)(Dielectric Power Factor Test 1) As a function of Voltage)	-	8000	-
22.1 g)(Dielectric Power Factor Test 1) As a function of temperature)	-	7000	-
22.1 h)(Heating Cycle Test)	-	18000	-
22.1 j)(Impulse Withstand Test)	-	15000	-
22.1 m)(Water Absorption Test - IS 10810: Part 28)	-	5500	-
22.1 n)(Flammability)	-	3000	-
24.1(Manufacturer's Identification)	-	0	-
24.2(Voltage Identification)	-	0	-
24.3(Cable Code)	-	0	-
25.2.1(Marking on drum )	-	0	-
25.2.2(BIS Certification Marking)	-	0	-
22.1 k)(High Voltage Test for Four Hours)	-	5000	-

03 Apr, 2027

-
-

8717

Spectro Analytical Labs Private Limited, Gautam Buddha Nagar

8130426

IS 16048 : Part 1 (2021)

SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES SECONDARY SEALED CELLS AND BATTERIES FOR PORTABLE APPLICATIONS PART 1: NICKEL-CADMIUM

150000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter measurement tolerances)	-	10000	-
5(Cell and battery designation and marking)	-	10000	-
6, Table no. 1,2,3and 4(Dimensions)	-	10000	-
7, Table no.5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,(Electrical tests)	-	80000	-
8(Mechanical tests)	-	20000	-
9(Safety requirements)	-	10000	-
10, Table no. 28, 29 , 30(Type approval and batch acceptance)	-	10000	-

04 Jan, 2027

-
Included w.e.f. 25.04.2024

8718

Bharat Test House Pvt Ltd 1474 Sonipat Haryana

9135626

IS 13021 : Part 2 (1991)

AC supplied electronic ballasts for tubular fluorescent lamps - Specification: Part 2 performance requirements

AC Supplied Electronic Ballasts For Tubular Florescent

34000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(mandatory markings:)	-	500	5% discount for BIS
5.2(addition to the mandatory marking)	-	500	5% discount for BIS
5.3(Non-mandatory information)	-	500	5% discount for BIS
5.4(BIS Standard Mark)	-	500	5% discount for BIS
6.1(GENERAL STATEMENT)	-	250	5% discount for BIS
7.0(STARTING CONDITIONS)	-	1000	5% discount for BIS
7.1(Ballast for Current Controlled Preheat Starting Mode)	-	1000	5% discount for BIS
7.2(Ballasts for Voltage-Controlled Preheat Starting Mode)	-	1000	5% discount for BIS
7.3(Ballast for Non-preheat Starting Mode)	-	1000	5% discount for BIS
7.3.1(Open Circuit Voltage)	-	1000	5% discount for BIS
7.3.2(Ballast Impedance Test)	-	1000	5% discount for BIS
7.3.3(Cathode Current)	-	1000	5% discount for BIS
7.4(Starting Aid and Distances)	-	1000	5% discount for BIS
8.1(ballast lumen factor)	-	3500	5% discount for BIS
8.2(total circuit power)	-	3500	5% discount for BIS
8.3(Requirements for dimming)	-	3500	5% discount for BIS
9.1(CIRCUIT POWER FACTOR)	-	2000	5% discount for BIS
10.1(SUPPLY CURRENT)	-	2000	5% discount for BIS
11.1(MAXIMUM CURRENT IN ANY LEAD TO A CATHODE)	-	3000	5% discount for BIS
12.1, 12.1.1, 12.1.5, Table 1(Harmonic Order)	-	2750	5% discount for BIS
12.1, 12.1.1, 12.1.5, Table 1(Maximum Value Expressed as a% of the Fundamental Current of the Luminaire)	-	2750	5% discount for BIS
12.1.2(Luminaire)	-	2750	5% discount for BIS
12.1.4, Table 2(Harmonic Order)	-	2750	5% discount for BIS
12.1.4, Table 2(Maximum Value Expressed as a% of the Fundamental Current of the Luminaire)	-	2750	5% discount for BIS
12.2(Lamp Operating Current Waveform)	-	2750	5% discount for BIS
13.1(MAGNETIC SCREENING)	-	1500	5% discount for BIS
14.1(Impedance fo Audio-Frequencies)	-	2500	5% discount for BIS
15.1(MAINS TRANSIENT OVERVOLTAGE)	-	3000	5% discount for BIS
16.1(Removal of Lamp(s))	-	5000	5% discount for BIS
16.2(Lamp Fails to Start)	-	5000	5% discount for BIS
17.0(ENDURANCE)	-	7000	5% discount for BIS

19 Mar, 2026

-
-

8719

Spectro Analytical Labs Private Limited, Gautam Buddha Nagar

8130426

IS 16270 (2014)

Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test

875000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Condition of use)	-	55000	-
5.1(Mechanical Endurance)	-	55000	-
5.2(Charge efficiency)	-	53000	-
5.3(Deep discharge protection)	-	55000	-
5.4(Marking)	-	52000	-
5.5(Dafety)	-	53000	-
5.6(Documentation)	-	54000	-
6(Finctional Characteristics)	-	57000	-
7(General test conditions)	-	57000	-
8.1(Capacity test)	-	53000	-
8.2(Endurance test)	-	55000	-
8.3(Charge retention test)	-	53000	-
8.4(Cycle endurance in Photovoltaic application)	-	57000	-
8.5(Sulphation Test)	-	54000	-
8.6(Water loss test)	-	57000	-
8.7(Non spillability)	-	55000	-

04 Jan, 2027

-
Included w.e.f. 25.04.2024

8720

Bharat Test House Pvt Ltd 1474 Sonipat Haryana

9135626

IS 12449 : Part 2 (1988)

Specification For starting devices (Other Than Glow Starters) : Part 2 performance requirements

Starters for High Intensity Discharge Lamps

42500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.4(Resistance to dust and moisture)	-	21000	5% discount for BIS
6.3(Construction)	-	21000	5% discount for BIS
6.2(Provisions for protective earthing)	-	21000	5% discount for BIS
5.4(Terminals)	-	21000	5% discount for BIS
5.3(Protection against accidental contact with live parts)	-	21000	5% discount for BIS
5.2(Marking)	-	21000	5% discount for BIS
4(Classification )	-	500	5% discount for BIS

19 Mar, 2026

-
REVISED TESTING CHARGES W.E.F. 5-7-2021. Included w.e.f 29-07-2020

8721

RTRC LIMITED, GURUGRAM

9177406

IS 7098 : Part 3 (1993)

Cross - Linked polyethylene insulated thermoplastic sheathed cables - Specification: Part 3 for working voltages from 66 kV up to and including 220 kV

450000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(CONDUCTOR)	-	0	-
5(INSULATION)	-	0	-
6(SCREENING)	-	0	-
7.1(MOISTURE BARRIER : Laminated Tape)	-	0	-
7.2(MOISTURE BARRIER : Lead Alloy Sheath)	-	0	-
7.3(MOISTURE BARRIER : Water Blocking Tape/Powder)	-	0	-
8.1(INNER SHEATH)	-	0	-
8.2(INNER SHEATH)	-	0	-
8.3(INNER SHEATH)	-	0	-
9.1(ARMOUR)	-	0	-
9.2(ARMOUR)	-	0	-
10.1(OUTER SHEATH)	-	0	-
10.2(OUTER SHEATH)	-	0	-
11.1(CONDUCTOR)	-	0	-
11.2(CONDUCTOR)	-	0	-
12.1(CONDUCTOR SCREENING )	-	0	-
12.2(CONDUCTOR SCREENING )	-	0	-
13.1(INSULATION)	-	0	-
13.2(INSULATION)	-	0	-
14.1(INSULATION SCREENING)	-	0	-
14.2.1(INSULATION SCREENING : Non-metallic Part)	-	0	-
14.2.2(INSULATION SCREENING : Non-metallic Part)	-	0	-
14.2.3(INSULATION SCREENING : Non-metallic Part)	-	0	-
14.3.1(INSULATION SCREENING : Metallic Part)	-	0	-
14.3.2(INSULATION SCREENING : Metallic Part)	-	0	-
14.3.3(INSULATION SCREENING : Metallic Part)	-	0	-
15.1(MOISTURE BARRIER)	-	0	-
15.2.1(Metallic Sheath)	-	0	-
15.2.2(Metallic Sheath)	-	0	-
16.1(INNER SHEATH)	-	0	-
16.2(INNER SHEATH)	-	0	-
17.1(ARMOUR)	-	0	-
17.2(ARMOUR)	-	0	-
17.3(ARMOUR)	-	0	-
17.4(ARMOUR)	-	0	-
17.5(ARMOUR)	-	0	-
18.1(OUTER SHEATH)	-	0	-
18.2(outer sheath colour)	-	0	-
18.3.1(Thickness of Outer Sheath : Unarmoured Cables)	-	2500	-
18.3.1(Thickness of Outer Sheath : armoured Cables)	-	2500	-
19.1 A) I)(Tests on conductor : Annealing test ( for copper ))	-	2500	-
19.1 A) II)(Tests on conductor : Resistance test)	-	12500	-
19.1 b) I)(Test for thickness and dimensions of insulation)	-	5000	-
19.1 b) II)(Tensile strength and elongation at break)	-	5000	-
19.1 b) III)(Thermal ageing in air oven)	-	10000	-
19.1 b) IV)(Hot set test)	-	6500	-
19.1 b) V)(Shrinkage test)	-	3500	-
20.3(Test for concentric metallic screen : Test for concentric copper wire)	-	5000	-
20.4(Test for concentric copper tape)	-	5000	-
20.5(Thickness of metallic sheath)	-	3500	-
20.6(Tests for armouring material : Dimensions)	-	3500	-
19.1 f) II)(Tests for armouring material : Tensile strength and elongation at break)	-	2000	-
Table 9, (Measurement of thickness)	-	1000	-
19.1 g)2) i)(PVC sheath : Tensile strength and elongation at break)	-	2000	-
19.1 g)2) iii)(PVC sheath : Loss of mass)	-	5500	-
19.1 g)2) v)(PVC sheath : Hot deformation test)	-	2500	-
19.1 g)2) vi)(PVC sheath : Shrinkage test)	-	3500	-
19.1 g)2) vii)(PVC sheath : Thermal stability)	-	1500	-
19.1 g)3) ii)(PE sheath : Tensile strength and elongation at break before and after ageing)	-	2000	If Applicable
19.1 g)3) iii)(PE sheath : Hot-detormation)	-	2500	Additional Charge, If Applicable
20.7(Flammabihty test ( for PVC outer sheathed cables only ))	-	3000	-
20.8.3(Water tightness test)	-	35000	-
20.9.1(Thermal ageing on complete cable sample)	-	12500	-
19.1 k) ii)(Tensile strength and elongation at breakfor insulation and outer sheath)	-	0	-
20.2(Resistivity test for semi-conducting layer)	-	7500	-
20.11.1(Bending test followed by P D test)	-	65000	-
20.12, 20.18(Dielectric power factor and capacitance measurement at ambient temperature)	-	18500	-
20.13(Dielectric power factor measurement at elevated temperature)	-	18500	-
20.14.1(Load cycle test followed by P.D measurement)	-	75000	-
20.15(Impulse Voltage Test Followed by High Voltage Test)	-	65000	-
19.5(Check on Insulation Thickness Before the Electrical Type Tests)	-	4000	-
20.16.1(Test for Dimensions of Insulation : Insulation Thickness)	-	4000	-
20.16.2(Test for Dimensions of Insulation : Test for Eccentricity)	-	4000	-
20.16.3(Test for Dimensions of Insulation : Test for Ovality)	-	3000	-
20.17(High Voltage Test ( as Routine and Acceptance Tests ) )	-	25000	-
20.18(Measurement of Capacitance)	-	25000	-

03 Apr, 2027

-
Exclusion: Above 66 kv for the following clauses, Testing Facility for Cl.20.17 (High Voltage Test ( as Routine and Acceptance Tests ) ), Cl. 20.18 (Measurement of Capacitance), Cl. 20.15 (Impulse Voltage Test Followed by High Voltage Test), Cl. 20.14.1 (Load cycle test followed by P.D measurement), Cl. 20.13 (Dielectric power factor measurement at elevated temperature), Cl. 20.12, 20.18 (Dielectric power factor and capacitance measurement at ambient temperature), Cl. 20.11.1 (Bending test followed by P D test)

8722

RTRC LIMITED, GURUGRAM

9177406

IS 14494 (2019)

Elastomer insulated flexible cables for use in mines - Specification (First Revision)

240000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(CONDUCTOR)	-	0	Complete Testing Charges : Rs 55000/- Three Core Cable upto 1.1 KV Cable. Rs 73000/- Three Core Cable for 1.9/3.3 KV Cable. Rs 80000/- Three Core Cable for 3.8/6.6 KV Cable. Rs 250000/- Four Core Cable for 6.35/11 KV Cable.
5(INSULATION)	-	0	-
5.1(Power Cores)	-	0	-
5.2(Pilot and Earth Cores)	-	0	-
6(SEMI-CONDUCTING COMPOUND)	-	0	-
7.1(TAPE : Proofed Tape)	-	0	-
7.2(TAPE : Polyethylene Terephalate (PETP) or Polypropylene Base Tape)	-	0	-
7.3(TAPE )	-	0	-
8(CENTRE)	-	0	-
9.1(FILLERS)	-	0	-
9.2(FILLERS)	-	0	-
10(CRADLE SEPARATOR)	-	0	-
11.1(ARMOUR)	-	0	-
11.2(ARMOUR)	-	0	-
11.2 a)(ARMOURING: Tensile Strength)	-	500	-
11.2 b)(ARMOURING: Elongation )	-	500	-
11.2 c)(ARMOURING: Torsion Test (For round wire ) )	-	500	-
11.2 d)(ARMOURING: Uniformity of zinc coating)	-	500	-
11.2 e)(ARMOURING: Mass of zinc coating )	-	500	-
12.1(SHEATH : Inner Sheath)	-	0	-
12.2(SHEATH : Outer Sheath)	-	0	-
13.1(REINFORCEMENT MATERIAL : Tape)	-	0	-
13.2(REINFORCEMENT MATERIAL : Cord/Yarns)	-	0	-
14.1(CONSTRUCTION : CONDUCTOR)	-	0	-
14.2(CONSTRUCTION : CONDUCTOR)	-	0	-
14.3(CONSTRUCTION : CONDUCTOR)	-	0	-
14.4(CONSTRUCTION : CONDUCTOR)	-	0	-
15(CONDUCTOR SCREENING)	-	0	-
16.1(INSULATION)	-	1000	Additional charge, Rs 1000/- for each additional core above three core cable up to 1.9/3.3 kV. Rs 5000/- for each additional core above three core cable above 1.9/3.3 kV
16.2(INSULATION : Thickness of Insulation)	-	1000	-
16.3(INSULATION : Tolerance on Insulation Thickness)	-	0	-
16.4(INSULATION : Application of Insulation)	-	0	-
16.5(INSULATION)	-	0	-
17.1(INSULATION SCREEN)	-	0	-
17.2(INSULATION SCREEN)	-	0	-
17.3(INSULATION SCREEN)	-	0	-
17.4(INSULATION SCREEN)	-	0	-
18(PROTECTIVE SCREEN)	-	0	-
19(CONDUCTANCE OF SCREEN)	-	0	-
19.1(Individual Core Screen)	-	0	-
19.2(Collective Screen)	-	0	-
20.1(CORE IDENTIFICATION)	-	0	-
20.2(Colour Scheme for Identification)	-	0	-
20.3(Scheme for Identification by Numbering)	-	0	-
21.1(LAYING UP OF CORES)	-	0	-
21.2(LAYING UP OF CORES)	-	0	-
21.3(LAYING UP OF CORES)	-	0	-
21.4(LAYING UP OF CORES)	-	0	-
22.1(INNER SHEATH)	-	0	-
22.2(Thickness of Inner Sheath)	-	500	-
22.3(INNER SHEATH)	-	0	-
23.1(ARMOURING)	-	0	-
23.2(ARMOURING)	-	0	-
23.3(ARMOURING)	-	0	-
23.4(ARMOURING)	-	0	-
24.1(OUTER SHEATH)	-	0	-
24.2(Thickness of Outer Sheath)	-	500	-
24.3(Tolerance on Thickness of Outer Sheath)	-	0	-
24.4(OUTER SHEATH)	-	0	-
25.1(CABLE CONSTRUCTION AND DIMENSIONS)	-	0	-
27.2(Bending test followed by partial discharge test;)	-	35000	Additional charge, if applicable
27.4(Dielectric power factor test)	-	25000	Additional charge, if applicable
27.5(Heating cycle test followed by partial discharge test;)	-	45000	Additional charge, if applicable
27.6(Impulse voltage test; and)	-	35000	Additional charge, if applicable
26.3(Special Provisions)	-	0	-
27.8(Flammability Test)	-	3500	-
27.9(Water Absorption Test)	-	7500	-
28(IDENTIFICATION)	-	0	-
29.1(PACKING AND MARKING)	-	0	-
29.2(PACKING AND MARKING)	-	0	-
30(BIS CERTIFICATION MARKING)	-	0	-
Table 33®, Annex E(Electric tset on semi-conducting screen)	-	25000	Additional charge, if applicable
Table 33(n), Cl. No. 27.7(High Voltage test for 4 hrs.)	-	5500	-
Table 33(j), Cl. No. 27.4(Dielectric Power Factor (as a function of Voltage))	-	0	-
Table 33(h), Cl. No. 27.2(Partial discharge test)	-	0	-
Table 33(f)(Insulation resistance)	-	3500	-
Table 33(e)(Tear resistance on sheath)	-	5500	-
Table 33(e)(Oil resistance - Elongation on sheath)	-	2500	-
Table 33(e)(Oil resistance - Tensile strength on sheath)	-	2500	-
Table 33(e)(Permanent set on Sheath)	-	0	-
Table 33(e)(Hot set on Sheath)	-	2500	-
Table 33(e)(Ageing in air bomb - Elongation on Sheath)	-	2500	-
Table 33(e)(Ageing in air bomb - Tensile strength on Sheath)	-	2500	-
Table 33(e)(Elongation at break on Sheath)	-	2500	-
Table 33(e)(Tensile strength on Sheath)	-	2500	-
Table 33(d)(Ozone resistance on Insulation)	-	12500	Additional charge, if applicable
Table 33(d)(Permanent set on Insulation)	-	0	-
Table 33(d)(Hot set on Insulation)	-	4000	-
Table 33(d)(Ageing in air bomb - Elongation on Insulation)	-	4000	-
Table 33(d)(Ageing in air bomb - Tensile strength on Insulation)	-	4000	-
Table 33(d)(Ageing in air oven - Elongation on Insulation)	-	2500	-
Table 33(d)(Ageing in air oven - Tensile strength on Insulation)	-	2500	-
Table 33(d)(Elongation at break on Insulation)	-	1000	-
Table 33(d)(Tensile strength on Insulation)	-	1000	-
Table 33(b)(Diameter of armour wire)	-	500	-
Table 4(Copper purity test)	-	9000	Additional charge, if applicable
Table 33(a)(Conductor resistance test)	-	2500	-
Table 33(a)(Annealing test)	-	1000	-
Table 33(c)(Resistivity of steel wire)	-	1000	-

03 Apr, 2027

-
-

8723

Testtex India Laboratories Private Limited, Noida

8138306

IS 15298 : Part 3 (2019)

Personal protective equipment: Part 3 protective footwear (Second Revision)

Protective footwear

41475 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.2 Table-2(Height of upper)	-	300	-
5.2.3 Table-2(Seat Region)	-	300	-
5.3.1.1 Table-2(Construction)	-	300	-
5.3.1.2 Table-2(Upper/Outsole Bond)	-	700	-
Table-2(Strength)	-	0	-
5.3.2.1 Table-2(General)	-	300	-
5.3.2.2 Table-2(Internal Length of toe cap)	-	300	-
5.3.2.3 Table-2(Impact Resistance -T- )	-	700	-
5.3.2.4 Table-2(Compression)	-	700	-
5.3.2.5 Table-2(Behaviour of toe cap)	-	500	-
5.3.3 Table-2(Leak Proofness)	-	500	-
5.3.4 Table-2(Specific Ergonomic)	-	1000	-
Table-2(Features)	-	0	-
Table-2(0.18)	-	26500	5.3.6 (Innocuousness)
5.4.1 Table-2(General)	-	300	-
5.4.2 Table-2(Thickness)	-	300	-
5 4 3 Table-2(Tear Strength)	-	500	-
5.4.4 Table-2(Tensile Properties)	-	500	-
5.4.5 Table-2(Flexing Resistance)	-	1000	-
5.4.6 Table-2(Water Vapour Permeability & Coefficient)	-	700	-
5 4.7 Table-2( )	-	500	-
5 4.8 Table-2(Hydrolysis)	-	3500	-
5.4 9 Table-2(Chrome VI)	-	750	-
5.5.1 Table-2(Tear Strength)	-	500	-
5.5.2 Table-2(Abrasion Resistance)	-	700	-
5.5.3 Table-2(Water Vapour Permeability & Coefficient)	-	700	-
5.5.4 Table-2(pH Value)	-	500	-
5.5.5 Table-2(Chrome VI)	-	750	-
5.6.1 Table-2(Tear Strength)	-	500	-
5.6.2 Table-2(pH Value)	-	500	-
5.6.3 Table-2(Chromium VI)	-	750	-
5.7.1 Table-3(Thickness)	-	300	-
5.7.2 Table-3(pH Value)	-	500	-
5.7.3 Table-3(Water Absorption &)	-	500	-
5.7.4.1 Table-3(Insole Abrasion)	-	400	-
5.7.4.2 Table-3(Abrasion)	-	700	-
5.7.5 Table-3(Chromium VI)	-	750	-
5.8.1 Table-2(Design)	-	900	Thickness, Cleat Height, Cleat Area
5.8.2 Table-2(Tear Strength)	-	500	-
5.8.3 Table-3(Abrasion Resistance)	-	700	-
5.8.4 Table-3(Flexing Resistance)	-	700	-
5.8.5 Table-3(Hydrolysis)	-	3500	-
5.8.6 Table-2(Interlayer BondStrength)	-	700	-
6.2.1 Table-I8(Penetration Resistance)	-	1000	-
6.2.2.1 Table-18(Electrical Properties)	-	0	-
Table-18(Conductive Footwear)	-	1000	-
6.2.2.2 Table-18(Antistatic Footwear)	-	1000	-
6.2.3.1 Table-18(Heat Insulated Comp)	-	700	-
6.2.3.2 Table-18(Cold Insulated)	-	700	-
6.2.4 Table-18(Energy Absorption of seat region)	-	2000	-
6.2.5 Table-18(Water Resistance)	-	500	-
6.2.7 Table-18(Ankle Protection)	-	0	-
6.2.8 Table-18(Cut Resistance)	-	2500	-
6.3 Table-18(Water Penetration & Absorption)	-	1000	-
6.4.1 Table-18(Resistance to Hot Contact)	-	700	-
6.4.2 Table-18(Resistance to Fuel oil)	-	700	-
Cl.4, Table1, Annex A ISO 20344 :2011(Classification and designs)	-	0	Clause Repeated
Cl. 5,Cl.5.1Table 2, Table 3(General)	-	0	Clause Repeated
Cl. 5.2, Cl.5.2.1, Figure 3,(General)	-	0	Clause Repeated
8(Information to be supplied)	-	0	Clause Repeated
Cl.8.1 IS 15298 Part 3:2018, ISO 20346 :2014(General)	-	0	Clause Repeated
8.2(Electrical properties)	-	0	Clause Repeated
8.2.1(Conductive footwear)	-	0	Clause Repeated
8.2.2(Antistatic footwear)	-	0	Clause Repeated
8.3(Insocks)	-	0	Clause Repeated
Cl.5.8.1.3(Cleat Height)	-	0	Clause Repeated
Cl.5.8.1.2(Cleated area)	-	0	Clause Repeated
Cl.5.8.1.1(Table 17 Thickness)	-	0	Clause Repeated
Table-3(Desorption)	-	0	Clause Repeated
6.2.7 Table-18(Ankle Protection)	-	0	Clause Repeated
6.2.8 Table-18(Cut Resistance)	-	0	Clause Repeated
Cl.4, Table1, Annex A ISO 20344 :2011(Classification and designs)	-	0	Clause Repeated
Cl. 5,Cl.5.1Table 2, Table 3(General)	-	0	Clause Repeated
Cl. 5.2, Cl.5.2.1, Figure 3,(General)	-	0	Clause Repeated
8(Information to be supplied)	-	0	Clause Repeated
Cl.8.1 IS 15298 Part 3:2018, ISO 20346 :2014(General)	-	0	Clause Repeated
8.2(Electrical properties)	-	0	Clause Repeated
8.2.1(Conductive footwear)	-	0	Clause Repeated
8.2.2(Antistatic footwear)	-	0	Clause Repeated
8.3(Insocks)	-	0	Clause Repeated
Cl.5.8.1.3(Cleat Height)	-	0	Clause Repeated
Cl.5.8.1.2(Cleated area)	-	0	Clause Repeated
Cl.5.8.1.1(Table 17 Thickness)	-	0	Clause Repeated
5.3.5.2 Table-2(Slip Resistance SRA)	-	0	Clause Repeated
5.3.5.3 Table-2(Slip Resistance SRB)	-	0	Clause Repeated
Cl.5.3.5.1, Cl.5.3.5.2,Cl.5.3.5.3 or 5.3.5.4 IS 15298 (Part1):2015,ISO 20344:2011,5.11(General)	-	2000	-
5.3.5.4 Table-2(Slip Resistance SRC)	-	0	Inclusive Cl. 5.3.5.1, 5.3.5.2, 5.3.5.3, 5.3.5.4
Cl. 6.2.6 Table 18(Metatarsal Protection)	-	2000	-

31 Dec, 2026

-
Included w.e.f. 03.10.2024 Exclusion: for all types of footwear except electrically insulated footwear, ankle protection footwear, Cl.5.3.6 innocuousness allergenic and carcinogenic disperse dyes

8724

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 17077 : Part 1 (2022)

PLASTICS ACRYLONITRILE- BUTADIENESTYRENE ABS MOULDING AND EXTRUSION MATERIALS PART 1 DESIGNATION SYSTEM AND SPECIFICATIONS

7925.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.5.1 and 6.1(Vicat Softening temperature,(°C),Clause 5 Table 3, IS 17077 (P-2))	-	1100.00	-
4.2.5.2 and 6.2(Charpy Notched Impact Strength,(kj/m²),Clause 5 Table 3, IS 17077 (P-2))	-	1725.00	TESTING CHARGES- 1100.00 SPECIMEN/ CONDITIOING CHARGES- 625.00
4.2.5.3 and 6.3(Melt Mass Flow Rate,(g/10min),Clause 5 Table 3,IS 17077 (P-2))	-	1100.00	-
4.2.5.4 and 6.4(Tensile Modulus,(Mpa),Clause 5 Table 3,IS 17077 (P-2))	-	1800.00	TESTING CHARGES- 1300.00 SPECIMEN/ CONDITIOING CHARGES- 500.00
6.5.1.2(Overall migration,(mg/dm²), IS 9845)	-	2200.00	TESTING CHARGES- 1700.00 SPECIMEN/ CONDITIOING CHARGES- 500.00

24 Apr, 2027

-
Exclusion: Cl 6.5.1.1 (Pigments and colourants, IS 9833)

8725

RTRC LIMITED, GURUGRAM

9177406

IS 7098 : Part 2 (2011)

Crosslinked polyethylene insulated thermoplastic sheathed cables - Specification: Part 2 for working voltages from 3.3 kV up to and including 33 kV (Second Revision)

190000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(CONDUCTOR)	-	0	-
4.1.1(CONDUCTOR)	-	0	-
5(INSULATION)	-	0	Complete testing Charge : Rs.1,90,000/- for Single core cable; Rs.2,40,000/- for Three core cable up to 19/33 kV. and Rs.4,20,000/- for Single core cable; Rs.6,25,000/- for Three core cable for 33/33 kV.
6(SCREENING)	-	0	-
6.1.1(SCREENING : - Non-metallic — Semiconducting Compound)	-	0	-
6.1.2(SCREENING : - Non-magnetic Metallic Tape for Single Core Unscreened and Unarmoured Cables)	-	0	-
7(FILLERS AND INNER SHEATH)	-	0	-
8.1(ARMOURING)	-	0	-
8.2(ARMOURING)	-	0	-
9(OUTER SHEATH )	-	0	-
10.1(CONDUCTOR)	-	0	-
10.2(CONDUCTOR)	-	0	-
11(CONDUCTOR SCREENING)	-	0	-
12.1(INSULATION)	-	0	-
12.2(INSULATION : Thickness of Insulation)	-	2500	-
12.3(INSULATION : Tolerance on Thickness of Insulation)	-	0	-
12.4(Eccentricity and Ovality)	-	2500	-
12.5(INSULATION : Application of Insulation)	-	0	-
13.1(INSULATION SCREENING)	-	0	-
13.2(INSULATION SCREENING)	-	0	-
13.3(INSULATION SCREENING)	-	0	-
13.4(INSULATION SCREENING)	-	0	-
14.1(CORE IDENTIFICATION)	-	25000	Additional Charge, Rs 25000/- for each additional Core
14.1.1(CORE IDENTIFICATION)	-	0	-
15.1(LAVING UP OF CORES)	-	0	-
16.1(INNER SHEATH (COMMON COVERING))	-	0	-
16.2(INNER SHEATH (COMMON COVERING))	-	0	-
16.2.1(INNER SHEATH (COMMON COVERING))	-	0	-
16.3(INNER SHEATH (COMMON COVERING) : Thickness of Inner Sheath)	-	500	-
16.3.1(INNER SHEATH (COMMON COVERING) : Thickness of Inner Sheath)	-	0	-
17.1(ARMOURING : Application )	-	0	-
17.1.1(ARMOURING )	-	0	-
17.1.2(ARMOURING )	-	0	-
17.1.3(ARMOURING )	-	0	-
17.2(ARMOURING : Type of armour )	-	0	-
17.2.1(ARMOURING : Type of armour )	-	0	-
17.2(ARMOURING : Coverage )	-	1500	-
17.3(ARMOURING : Dimension )	-	1000	-
17.4(ARMOURING : Joints)	-	0	-
16.4(ARMOURING : Resistance)	-	3500	-
18.1(OUTER SHEATH)	-	0	-
18.2(OUTER SHEATH: Colour)	-	0	-
18.3(Thicknes of outer sheath : average )	-	500	-
18.3(Thicknes of outer sheath : minimum )	-	0	-
19.1 i) a)(Annealing test (for copper))	-	2500	Charge, as applicable
19.1 i) b)(Tensile test (for aluminium) - Before stranding )	-	2500	Charge, as applicable
19.1 i) b)(Tensile test (for aluminium) - After stranding )	-	0	-
19.1 i) c)(Wrapping test ( for aluminium))	-	0	-
19.1 i) d)(Resistance test - Main conductor )	-	3500	-
19.1 i) d)(Resistance test - Neutral conductor )	-	0	-
19.1 iii) a)(Phyaical tests for insulation : Tensile Test)	-	1500	-
19.1 iii) a)(Phyaical tests for insulation : Elongation )	-	1000	-
19.1 iii) b)(Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	2500	-
19.1 iii) b)(Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	2500	-
19.1 iii) c)(Degree of cross linking )	-	0	-
19.1 iii) d)(Phyaical tests for insulation : Hot set )	-	4000	-
19.1 iii) d)(Phyaical tests for insulation : Permanent set )	-	0	-
19.1 iii) e)(Phyaical tests for insulation : Shrinkage )	-	2500	-
19.1 iii) e)(Phyaical tests for insulation : Shrinkage - Crack observed )	-	0	-
19.1 iii) f)(Insulation: Waterabsorption(gravimetric))	-	5500	-
19.1 v) a)(Test for strippability of semiconducting strippable insulation screen (when applicable))	-	1000	-
19.1 v) b)(Volume resistivity)	-	4500	-
19.1 vi) a)(Physical tests for outer sheath : Tensile stregth )	-	1500	-
19.1 vi) a)(Physical tests for outer sheath : Elongation )	-	1000	-
19.1 vi) b)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	2500	-
19.1 vi) b)(Physical tests for outer sheath -Ageing in air oven : Elongation )	-	2500	-
19.1 vi) b)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	0	-
19.1 vi) b)(Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	0	-
19.1 vi) c)(Phyaical tests for Sheath : Shrinkage )	-	1000	-
19.1 vi) c)(Phyaical tests for Sheath : Shrinkage - Crack observed )	-	0	-
19.1 vi) d)(Sheath : Hot deformation)	-	2000	-
19.1 vi) e)(Loss of massIn air oven)	-	2000	-
19.1 vi) f)(Sheath : Heat shock test)	-	2000	-
19.1 vi) g)(Sheath : Thermalstability)	-	1000	-
19.1 vi) h)(Carbon black content of polythene sheath )	-	3500	Additional charges, If Applicable
19.1 vii)(Thermal ageing test for complete cable - Tensile stregth )	-	2500	-
19.1 vii)(Thermal ageing test for complete cable- Elogation )	-	2500	-
19.1 vii)(Thermal ageing test for complete cable- Resistivity )	-	2500	-
19.1 xi)(Insulation resistance test : volume resistivity )	-	3500	-
20.2(Partial discharge test)	-	20000	-
20.3(Bending test)	-	5000	-
20.4(Dielectric power factor test : As a function of voltage)	-	7000	-
20.4(Dielectric power factor test : As a function of temperature)	-	5000	-
20.5(Heating Cycle Test)	-	25000	-
20.6(Impulse withstand test (Rated voltage, kV 3.8/6.6 Impulse voltage, kV 60))	-	20000	Additional charges, If Applicable
20.7(High voltage test)	-	10000	-
20.8(Flammability test)	-	3500	-
20.1(Oxygen Index Test)	-	2500	Additional Charge, if applicable
20.11(Flame Retardance Test on Single Cables)	-	2500	-
20.12(Flame Retardance Test on Bunched Cables)	-	10000	Additional Charge, if applicable
20.13(Test for Halogen Acid Gas Evolution)	-	4000	Additional Charge, if applicable
20.14( Test for Smoke Density)	-	4500	Additional Charge, if applicable
20.15(Temperature Index)	-	0	Additional Charge, if applicable
21.1(IDENTIFICATION : Manufacturer's Identification)	-	0	-
21.2(IDENTIFICATION : Cable Identification)	-	0	-
21.3(IDENTIFICATION : Cable Code)	-	0	-
20.3 (a)(Partial discharge test (Bending test))	-	0	-
20.5 (a)(PD test (heating cycle test))	-	0	-
20.6(Impulse Withstand Test (Rated voltage, kV 6.35/11 Impulse voltage, kV 75))	-	20000	as applicable.
20.6(Impulse Withstand Test (Rated voltage, kV 11/11 Impulse voltage, kV 95))	-	20000	as applicable.
20.6(Impulse Withstand Test (Rated voltage, kV 12.7/22 Impulse voltage, kV 125))	-	20000	as applicable.
20.6(Impulse Withstand Test (Rated voltage, kV 19/33 Impulse voltage, kV 170))	-	20000	as applicable.

03 Apr, 2027

-
-

8726

Bharat Test House Pvt Ltd 1474 Sonipat Haryana

9135626

IS 12449 : Part 1 (1988)

Specification For starting devices (Other Than Glow Starters) : Part 1 general and safety requirements

Starters for High Intensity Discharge Lamps

55000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
20(Resistance to Corrosion)	-	5250	5% discount for BIS
19(Resistance to heat, fire and tracking)	-	6500	5% discount for BIS
18(Creepage distances and Clearance )	-	1000	5% discount for BIS
17(Screws, current-carrying parts and Connections)	-	2000	5% discount for BIS
16(Mechanical Strength)	-	5000	5% discount for BIS
15(Pulse Voltage of Ignitors)	-	2500	5% discount for BIS
14(Heating of independent starting Devices)	-	7000	5% discount for BIS
13(Fault Conditions)	-	3000	5% discount for BIS
12(Insulation resistance and Electric strength)	-	10000	5% discount for BIS
11(Resistance to dust and moisture)	-	8000	5% discount for BIS
10(Construction)	-	1500	5% discount for BIS
9(Provisions for protective earthing)	-	1000	5% discount for BIS
8(Terminals)	-	1000	5% discount for BIS
7(Protection against accidental contact with live parts)	-	1000	5% discount for BIS
6(Marking)	-	250	5% discount for BIS
5(Classification )	-	0	-

19 Mar, 2026

-
-

8727

Hindustaan Testing Solutions LLP, Ambala

9122136

IS 2046 (1995)

Decorative thermosetting synthetic resinbonded laminated sheets specification (Second Revision)

All

25400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4 , Table 1(CLASSIFICATION)	-	0	Complete Testing Charges-25400 20% discount to BIS GST applicable as per govt rule
5.1(Colour and Pattern)	-	100	-
5.2(Surface Finish)	-	100	-
5.2.2(Reverse side/Bonding)	-	0	-
5.3 ,Table 5(Thickness)	-	200	-
5.4(Appearance )	-	100	-
5.2.2(Sports, dirt and similar surface defects)	-	200	-
5.2.2(Fibres,hairs,scratches)	-	100	-
5.2.2(Accumulated(Combination)of surface defects)	-	100	-
5.2.2(Edge Defects)	-	100	-
5.2.2(Broken Corners )	-	100	-
5.4.4(Sanding Defects)	-	100	-
5.4.5 table 6(W arping (Flatness ))	-	200	-
5.4.6 (Length and width of a full size Laminate)	-	400	-
5.4.6 (Length and width of a full size Laminate)	-	0	-
5.4.7,Fig. 2(Staightness of Edges)	-	200	-
5.4.8, Fig.3(Squareness of the Laminates)	-	200	-
5.5, Tables 7, Sr No.(i) Annex C(Resistance to Surface wear)	-	1500	-
5.5, Tables 7, Sr No.(ii) Annex D(Resistance to immersin in boiling water)	-	2000	-
5.5, Tables 7, Sr No.(ii) Annex D(Resistance to immersin in boiling water)	-	0	-
5.5, Tables 7, Sr No.(ii) Annex D(Resistance to immersin in boiling water)	-	0	-
5.5, Tables 7, Sr No.(iii) Annex E(Resistance to Dry heat at 180 °C)	-	1500	-
5.5, Tables 7, Sr No.(iv) Annex F(Dimensional Stability at deviated Temperature)	-	1800	-
5.5, Tables 7, Sr No.(v) Annex G(Dimensional Stability at 20°C)	-	1800	-
5.5, Tables 7, Sr No.(vi) Annex G(Resistance to impact by small diameter ball)	-	1000	-
5.5, Tables 7, Sr No.(vii) Annex J(Resistance to impact by large diameter balls (self supporting compact laminates))	-	1500	-
5.5, Tables 7, Sr No.(viii) Annex K(Resistance to cracking (thin laminates))	-	600	-
5.5, Tables 7, Sr No.(ix) Annex B & E(Resistance to scratching)	-	600	-
5.5, Tables 7, Sr No.(x) Annex -M(Resistance to staining)	-	600	-
5.5, Tables 7, Sr No.(x) Annex -N (alternative)(Resistance to colour change)	-	3500	-
5.5, Tables 7, Sr No.(x) Annex -O (alternative)(Resistance to colour change)	-	0	-
5.5, Tables 7, Sr No.(xi) Annex -P (alternative)(Resistance to Cigarette burns)	-	600	-
5.5, Tables 7, Sr No.(xi) Annex -R (Formability Method A)	-	1000	-
5.5, Tables 7, Sr No.(xiv) Annex -S (Resistance to Blistering Method A)	-	1000	-
5.5, Tables 7, Sr No.(xv) Annex -T (Resistance to steam)	-	600	-
5.5, Tables 7, Sr No.(xvi) Annex -N (Resistance to crazing (Thick laminates))	-	600	-
5.5, Tables 7, Sr No.(xvii) Annex -Y (Resistance to moisture (Double faced compact laminates))	-	1000	-
5.5, Tables 7, Sr No.(xviii) Annex -F of IS 13401 (Flexural Modulus)	-	500	-
5.5, Tables 7, Sr No.(xix) Annex -F of IS 13401 (Flexural Strength)	-	500	-
5.5, Tables 7, Sr No.(xx) IS 8543 (Part4/Sec1) (Tensile Strength)	-	1000	-
7.2 a)(Marking)	-	0	-
7.2 b)(Marking)	-	0	-
7.2 c)(Marking)	-	0	-
7.2 d)(Marking)	-	0	-
7.2.1(Marking)	-	0	-
5 & 5.1(Colour & Pattern)	-	0	-
5.2(Surface & Finish)	-	0	-
5.2.2(Reverse side Bonding)	-	0	-
5.3(Nominal thickness)	-	0	-
5.4.1.1(Surface defects)	-	0	-
5.4.1.2(Fiber hair scratches)	-	0	-
5.4.1.3(Accumulated(combinations) of surface defect)	-	0	-
5.4.2(Edge defect)	-	0	-
5.4.3(Broken corner)	-	0	-
5.4.4(Sanding defect)	-	0	-
5.4.5(Warping(Flatness))	-	0	-
5.4.6(Length)	-	0	-
5.4.6(Width)	-	0	-
5.4.7(Straightness of edge)	-	0	-
5.4.8(Squreness of laminate)	-	0	-
5.5Table-7(1(Surfacewear)	-	0	-
Table-7(2(Immesion in boiling water)	-	0	-
Table-7(3(Dry heat resistance)	-	0	-
Table-7(4(Dimensional stability)	-	0	-
Table-7(6(Impact by small dia.Ball)	-	0	-
Table-7(7(Impact by large dia.Ball)	-	0	-
Table-7(8(Cracking resistance)	-	0	-
Table-7(9(Scracting resistance)	-	0	-
Table-7(10(Staining resistance)	-	0	-
Table-7(10(Colour change(Xenon arc resis))	-	0	-
Table-7(11(Cigarette burn resistance)	-	0	-
Table-7(12(Formability)	-	0	-
Table-7(13(Blistering)	-	0	-
Table-7(14(Steam resistance)	-	0	-
Table-7(15(Crazing reistance)	-	0	-
Table-7(16(Moisture reistance)	-	0	-
Table-8(17(Flexural Modulus)	-	0	-
Table-8(18(Flexural strength)	-	0	-
Table-8(19(Tensile strength)	-	0	-
4 , Table 1(CLASSIFICATION)	-	0	-
5.1(Colour and Pattern)	-	0	-
5.2(Surface Finish)	-	0	-
5.2.2(Reverse side/Bonding)	-	0	-
5.3 ,Table 5(Thickness)	-	0	-
5.4(Appearance )	-	0	-
5.2.2(Sports, dirt and similar surface defects)	-	0	-
5.2.2(Fibres,hairs,scratches)	-	0	-
5.2.2(Accumulated(Combination)of surface defects)	-	0	-
5.2.2(Edge Defects)	-	0	-
5.2.2(Broken Corners )	-	0	-
5.4.4(Sanding Defects)	-	0	-
5.4.5 table 6(W arping (Flatness ))	-	0	-
5.4.6 (Length and width of a full size Laminate)	-	0	-
5.4.6 (Length and width of a full size Laminate)	-	0	-
5.4.7,Fig. 2(Staightness of Edges)	-	0	-
5.4.8, Fig.3(Squareness of the Laminates)	-	0	-
5.5, Tables 7, Sr No.(i) Annex C(Resistance to Surface wear)	-	0	-
5.5, Tables 7, Sr No.(ii) Annex D(Resistance to immersin in boiling water)	-	0	-
5.5, Tables 7, Sr No.(ii) Annex D(Resistance to immersin in boiling water)	-	0	-
5.5, Tables 7, Sr No.(ii) Annex D(Resistance to immersin in boiling water)	-	0	-
5.5, Tables 7, Sr No.(iii) Annex E(Resistance to Dry heat at 180 °C)	-	0	-
5.5, Tables 7, Sr No.(iv) Annex F(Dimensional Stability at deviated Temperature)	-	0	-
5.5, Tables 7, Sr No.(v) Annex G(Dimensional Stability at 20°C)	-	0	-
5.5, Tables 7, Sr No.(vi) Annex G(Resistance to impact by small diameter ball)	-	0	-
5.5, Tables 7, Sr No.(vii) Annex J(Resistance to impact by large diameter balls (self supporting compact laminates))	-	0	-
5.5, Tables 7, Sr No.(viii) Annex K(Resistance to cracking (thin laminates))	-	0	-
5.5, Tables 7, Sr No.(ix) Annex B & E(Resistance to scratching)	-	0	-
5.5, Tables 7, Sr No.(x) Annex -M(Resistance to staining)	-	0	-
5.5, Tables 7, Sr No.(x) Annex -N (alternative)(Resistance to colour change)	-	0	-
5.5, Tables 7, Sr No.(xi) Annex -P (alternative)(Resistance to Cigarette burns)	-	0	-
5.5, Tables 7, Sr No.(xi) Annex -R (Formability Method A)	-	0	-
5.5, Tables 7, Sr No.(xiv) Annex -S (Resistance to Blistering Method A)	-	0	-
5.5, Tables 7, Sr No.(xv) Annex -T (Resistance to steam)	-	0	-
5.5, Tables 7, Sr No.(xvi) Annex -N (Resistance to crazing (Thick laminates))	-	0	-
5.5, Tables 7, Sr No.(xvii) Annex -Y (Resistance to moisture (Double faced compact laminates))	-	0	-
5.5, Tables 7, Sr No.(xviii) Annex -F of IS 13401 (Flexural Modulus)	-	0	-
5.5, Tables 7, Sr No.(xix) Annex -F of IS 13401 (Flexural Strength)	-	0	-
5.5, Tables 7, Sr No.(xx) IS 8543 (Part4/Sec1) (Tensile Strength)	-	0	-
7.2 a)(Marking)	-	0	-
7.2 b)(Marking)	-	0	-
7.2 c)(Marking)	-	0	-
7.2 d)(Marking)	-	0	-
7.2.1(Marking)	-	0	-
5 & 5.1(Colour & Pattern)	-	0	-
5.2(Surface & Finish)	-	0	-
5.2.2(Reverse side Bonding)	-	0	-
5.3(Nominal thickness)	-	0	-
5.4.1.1(Surface defects)	-	0	-
5.4.1.2(Fiber hair scratches)	-	0	-
5.4.1.3(Accumulated(combinations) of surface defect)	-	0	-
5.4.2(Edge defect)	-	0	-
5.4.3(Broken corner)	-	0	-
5.4.4(Sanding defect)	-	0	-
5.4.5(Warping(Flatness))	-	0	-
5.4.6(Length)	-	0	-
5.4.6(Width)	-	0	-
5.4.7(Straightness of edge)	-	0	-
5.4.8(Squreness of laminate)	-	0	-
5.5Table-7(1(Surfacewear)	-	0	-
Table-7(2(Immesion in boiling water)	-	0	-
Table-7(3(Dry heat resistance)	-	0	-
Table-7(4(Dimensional stability)	-	0	-
Table-7(6(Impact by small dia.Ball)	-	0	-
Table-7(7(Impact by large dia.Ball)	-	0	-
Table-7(8(Cracking resistance)	-	0	-
Table-7(9(Scracting resistance)	-	0	-
Table-7(10(Staining resistance)	-	0	-
Table-7(10(Colour change(Xenon arc resis))	-	0	-
Table-7(11(Cigarette burn resistance)	-	0	-
Table-7(12(Formability)	-	0	-
Table-7(13(Blistering)	-	0	-
Table-7(14(Steam resistance)	-	0	-
Table-7(15(Crazing reistance)	-	0	-
Table-7(16(Moisture reistance)	-	0	-
Table-8(17(Flexural Modulus)	-	0	-
Table-8(18(Flexural strength)	-	0	-
Table-8(19(Tensile strength)	-	0	-
4 , Table 1(CLASSIFICATION)	-	0	-
5.1(Colour and Pattern)	-	0	-
5.2(Surface Finish)	-	0	-
5.2.2(Reverse side/Bonding)	-	0	-
5.3 ,Table 5(Thickness)	-	0	-
5.4(Appearance )	-	0	-
5.2.2(Sports, dirt and similar surface defects)	-	0	-
5.2.2(Fibres,hairs,scratches)	-	0	-
5.2.2(Accumulated(Combination)of surface defects)	-	0	-
5.2.2(Edge Defects)	-	0	-
5.2.2(Broken Corners )	-	0	-
5.4.4(Sanding Defects)	-	0	-
5.4.5 table 6(W arping (Flatness ))	-	0	-
5.4.6 (Length and width of a full size Laminate)	-	0	-
5.4.6 (Length and width of a full size Laminate)	-	0	-
5.4.7,Fig. 2(Staightness of Edges)	-	0	-
5.4.8, Fig.3(Squareness of the Laminates)	-	0	-
5.5, Tables 7, Sr No.(i) Annex C(Resistance to Surface wear)	-	0	-
5.5, Tables 7, Sr No.(ii) Annex D(Resistance to immersin in boiling water)	-	0	-
5.5, Tables 7, Sr No.(ii) Annex D(Resistance to immersin in boiling water)	-	0	-
5.5, Tables 7, Sr No.(ii) Annex D(Resistance to immersin in boiling water)	-	0	-
5.5, Tables 7, Sr No.(iii) Annex E(Resistance to Dry heat at 180 °C)	-	0	-
5.5, Tables 7, Sr No.(iv) Annex F(Dimensional Stability at deviated Temperature)	-	0	-
5.5, Tables 7, Sr No.(v) Annex G(Dimensional Stability at 20°C)	-	0	-
5.5, Tables 7, Sr No.(vi) Annex G(Resistance to impact by small diameter ball)	-	0	-
5.5, Tables 7, Sr No.(vii) Annex J(Resistance to impact by large diameter balls (self supporting compact laminates))	-	0	-
5.5, Tables 7, Sr No.(viii) Annex K(Resistance to cracking (thin laminates))	-	0	-
5.5, Tables 7, Sr No.(ix) Annex B & E(Resistance to scratching)	-	0	-
5.5, Tables 7, Sr No.(x) Annex -M(Resistance to staining)	-	0	-
5.5, Tables 7, Sr No.(x) Annex -N (alternative)(Resistance to colour change)	-	0	-
5.5, Tables 7, Sr No.(xi) Annex -P (alternative)(Resistance to Cigarette burns)	-	0	-
5.5, Tables 7, Sr No.(xi) Annex -R (Formability Method A)	-	0	-
5.5, Tables 7, Sr No.(xiv) Annex -S (Resistance to Blistering Method A)	-	0	-
5.5, Tables 7, Sr No.(xv) Annex -T (Resistance to steam)	-	0	-
5.5, Tables 7, Sr No.(xvi) Annex -N (Resistance to crazing (Thick laminates))	-	0	-
5.5, Tables 7, Sr No.(xvii) Annex -Y (Resistance to moisture (Double faced compact laminates))	-	0	-
5.5, Tables 7, Sr No.(xviii) Annex -F of IS 13401 (Flexural Modulus)	-	0	-
5.5, Tables 7, Sr No.(xix) Annex -F of IS 13401 (Flexural Strength)	-	0	-
5.5, Tables 7, Sr No.(xx) IS 8543 (Part4/Sec1) (Tensile Strength)	-	0	-
7.2 a)(Marking)	-	0	-
7.2 b)(Marking)	-	0	-
7.2 c)(Marking)	-	0	-
7.2 d)(Marking)	-	0	-
7.2.1(Marking)	-	0	-
5 & 5.1(Colour & Pattern)	-	0	-
5.2(Surface & Finish)	-	0	-
5.2.2(Reverse side Bonding)	-	0	-
5.3(Nominal thickness)	-	0	-
5.4.1.1(Surface defects)	-	0	-
5.4.1.2(Fiber hair scratches)	-	0	-
5.4.1.3(Accumulated(combinations) of surface defect)	-	0	-
5.4.2(Edge defect)	-	0	-
5.4.3(Broken corner)	-	0	-
5.4.4(Sanding defect)	-	0	-
5.4.5(Warping(Flatness))	-	0	-
5.4.6(Length)	-	0	-
5.4.6(Width)	-	0	-
5.4.7(Straightness of edge)	-	0	-
5.4.8(Squreness of laminate)	-	0	-
5.5Table-7(1(Surfacewear)	-	0	-
Table-7(2(Immesion in boiling water)	-	0	-
Table-7(3(Dry heat resistance)	-	0	-
Table-7(4(Dimensional stability)	-	0	-
Table-7(6(Impact by small dia.Ball)	-	0	-
Table-7(7(Impact by large dia.Ball)	-	0	-
Table-7(8(Cracking resistance)	-	0	-
Table-7(9(Scracting resistance)	-	0	-
Table-7(10(Staining resistance)	-	0	-
Table-7(10(Colour change(Xenon arc resis))	-	0	-
Table-7(11(Cigarette burn resistance)	-	0	-
Table-7(12(Formability)	-	0	-
Table-7(13(Blistering)	-	0.01	-
Table-7(14(Steam resistance)	-	0	-
Table-7(15(Crazing reistance)	-	0	-
Table-7(16(Moisture reistance)	-	0	-
Table-8(17(Flexural Modulus)	-	0.01	-
Table-8(18(Flexural strength)	-	0	-
Table-8(19(Tensile strength)	-	0	-

12 Sep, 2028

-
Included w.e.f 27.11.2024 Exclusion Cl 5.5, Tables 7, (xi) (Resistance to Cigarette burns) Cl 5.5, Tables 7, (xiv) (Formability Method B) Cl 5.5, Tables 7, (xiv) (Resistance to Blistering Method B)

8728

Bharat Test House Pvt Ltd 1474 Sonipat Haryana

9135626

IS 9974 : Part 1 (1981)

Specification for high pressure sodium vapour lamps: Part 1 general requirements and tests

High Pressure Sodium Vapor Lamps

55000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(MARKING : Mark of origin)	-	400	5% discount for BIS
5.1(MARKING : Rated wattage; )	-	400	5% discount for BIS
5.1(MARKING : Country of manufacture; )	-	400	5% discount for BIS
5.1(MARKING : Lamp designation )	-	400	5% discount for BIS
5.1(MARKING : Rated voltage or voltage range. )	-	400	5% discount for BIS
5.1.1(MARKING)	-	400	5% discount for BIS
6(LAMP CAPS )	-	1200	5% discount for BIS
7.2.1(Lamp Starting Test : Lamp with External Starter)	-	12500	5% discount for BIS
7.2.2(Lamp Starting Test : Lamp with Internal Starter)	-	12500	5% discount for BIS
7.3.1(Lamp Worm-Up Test)	-	12500	5% discount for BIS
7.3.2(Lamp Worm-Up Test)	-	12500	5% discount for BIS
7.4.1(Lamp Electrical Characteristics : Ageing)	-	12500	5% discount for BIS
7.4.2(Lamp Electrical Characteristics : Ageing)	-	12500	5% discount for BIS
8.1(Open Circuit Voltage)	-	12500	5% discount for BIS
8.2.1(Starting Pulse Characteristics )	-	12500	5% discount for BIS
8.2.2(Starting Pulse Characteristics )	-	12500	5% discount for BIS
8.2.3(Starting Pulse Characteristics )	-	12500	5% discount for BIS
8.2.4.1(Starting Pulse Characteristics : General guidance)	-	12500	5% discount for BIS
8.2.4.2(Starting Pulse Characteristics : General guidance)	-	12500	5% discount for BIS
8.2.4.3(Starting Pulse Characteristics : General guidance)	-	12500	5% discount for BIS
8.3(Lamp Warm-Up Current )	-	12500	5% discount for BIS
8.4(Current Crest Factor )	-	12500	5% discount for BIS
9.1(Voltage Increase at Lamp Terminals)	-	12500	5% discount for BIS
9.2(Lamp Envelope Temperatures )	-	12500	5% discount for BIS
9.3(Permissible Cap Temperatures )	-	12500	5% discount for BIS
4.1(Lamp Dimensions )	-	600	5% discount for BIS
4.2(Glass Bulb)	-	600	5% discount for BIS
4.3.1(Caps)	-	600	5% discount for BIS
4.3.2(Caps)	-	600	5% discount for BIS
4.3.3(Caps)	-	600	5% discount for BIS
4.3.4(Caps : Insulation Resistance)	-	600	5% discount for BIS
10.1(5 000 hours operation, )	-	15000	5% discount for BIS
10.2(Life Test)	-	15000	5% discount for BIS
10.2.1(Switching ‘on’ and switching ‘off’ during life test)	-	15000	5% discount for BIS
11.1( General Conditions )	-	200	5% discount for BIS
11.2(Mechanical, Physical and Marking Requirements )	-	200	5% discount for BIS
11.3.1( Lamp Starting, Warm-up and Electrical Characteristica )	-	200	5% discount for BIS
11.4(Lumen Maintenmce)	-	200	5% discount for BIS
3.1(Starting and operating conditions)	-	100	5% discount for BIS
4(Mechnical and Physical Requirements)	-	600	5% discount for BIS

19 Mar, 2026

-
-

8729

Bharat Test House Pvt Ltd 1474 Sonipat Haryana

9135626

IS 2418 : Part 1 (2018)

Tubular fluorescent lamps for general lighting service: Part 1 safety requirements (Second Revision)

Tubular Fluorescent Lamps

29500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No. 4.10(Lamp minimum overall length)	-	1500	5% discount for BIS
Clause No. 4.9(Lamp cap temperature rise)	-	3500	5% discount for BIS
Clause No. 4.8(Creepage distance for caps)	-	1500	5% discount for BIS
Clause No. 4.7(Resistance to heat & fire)	-	4250	5% discount for BIS
Clause No. 4.6(Parts which can become accidentally live)	-	1250	5% discount for BIS
Clause No. 4.5(Electric strength )	-	4000	5% discount for BIS
Clause No. 4.4(Insulation Resistance Measurement)	-	2500	5% discount for BIS
Clause No. 4.3(Mechanical requirement for caps)	-	1500	5% discount for BIS
Clause No. 4.2 (Marking.)	-	500	5% discount for BIS
3.9(Routine test)	-	0	-
7.1.3(Routine Tests)	-	0	-
4.11(Information for Luminaire Design)	-	4500	5% discount for BIS
4.12(Information for Ballast Design)	-	4500	5% discount for BIS

19 Mar, 2026

-
-

8730

Hi Physix Laboratory India Private Limited, Pune

7126926

IS 1475 : Part 1 (2001)

Self - Contained drinking water coolers - Specification: Part 1 energy consumption and performance (Third Revision)

24700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(COMPONENTS AND THEIR MATERIALS)	-	100	-
6.2(COMPONENTS AND THEIR MATERIALS)	-	100	-
6.3(COMPONENTS AND THEIR MATERIALS)	-	100	-
6.4(COMPONENTS AND THEIR MATERIALS)	-	100	-
6.5(COMPONENTS AND THEIR MATERIALS)	-	100	-
6.6(COMPONENTS AND THEIR MATERIALS)	-	100	-
6.7(COMPONENTS AND THEIR MATERIALS)	-	100	-
6.8(COMPONENTS AND THEIR MATERIALS)	-	100	-
6.9(COMPONENTS AND THEIR MATERIALS)	-	100	-
6.1(COMPONENTS AND THEIR MATERIALS)	-	100	-
6.11(COMPONENTS AND THEIR MATERIALS)	-	100	-
6.12(COMPONENTS AND THEIR MATERIALS)	-	100	-
6.13(COMPONENTS AND THEIR MATERIALS)	-	100	-
6.14(COMPONENTS AND THEIR MATERIALS)	-	100	-
6.15(COMPONENTS AND THEIR MATERIALS)	-	100	-
6.16(COMPONENTS AND THEIR MATERIALS)	-	100	-
6.17(COMPONENTS AND THEIR MATERIALS)	-	100	-
7.7.1(Insulation Resistance)	-	1000	-
7.7.2(High Voltage Test)	-	1000	-
7.7.3(Cooling capacity rating test)	-	8000	-
7.7.4(Maximum operating conditions)	-	5000	-
7.8.2(Performance test)	-	8000	-
6.1(COMPONENTS AND THEIR MATERIALS)	-	0	-
6.2(COMPONENTS AND THEIR MATERIALS)	-	0	-
6.3(COMPONENTS AND THEIR MATERIALS)	-	0	-
6.4(COMPONENTS AND THEIR MATERIALS)	-	0	-
6.5(COMPONENTS AND THEIR MATERIALS)	-	0	-
6.6(COMPONENTS AND THEIR MATERIALS)	-	0	-
6.7(COMPONENTS AND THEIR MATERIALS)	-	0	-
6.8(COMPONENTS AND THEIR MATERIALS)	-	0	-
6.9(COMPONENTS AND THEIR MATERIALS)	-	0	-
6.1(COMPONENTS AND THEIR MATERIALS)	-	0	-
6.11(COMPONENTS AND THEIR MATERIALS)	-	0	-
6.12(COMPONENTS AND THEIR MATERIALS)	-	0	-
6.13(COMPONENTS AND THEIR MATERIALS)	-	0	-
6.14(COMPONENTS AND THEIR MATERIALS)	-	0	-
6.15(COMPONENTS AND THEIR MATERIALS)	-	0	-
6.16(COMPONENTS AND THEIR MATERIALS)	-	0	-
6.17(COMPONENTS AND THEIR MATERIALS)	-	0	-
7.7.1(Insulation Resistance)	-	0	-
7.7.2(High Voltage Test)	-	0	-
7.7.3(Cooling capacity rating test)	-	0	-
7.7.4(Maximum operating conditions)	-	0	-
7.8.2(Performance test)	-	0	-
6.1(COMPONENTS AND THEIR MATERIALS)	-	0	-
6.2(COMPONENTS AND THEIR MATERIALS)	-	0	-
6.3(COMPONENTS AND THEIR MATERIALS)	-	0	-
6.4(COMPONENTS AND THEIR MATERIALS)	-	0	-
6.5(COMPONENTS AND THEIR MATERIALS)	-	0	-
6.6(COMPONENTS AND THEIR MATERIALS)	-	0	-
6.7(COMPONENTS AND THEIR MATERIALS)	-	0	-
6.8(COMPONENTS AND THEIR MATERIALS)	-	0	-
6.9(COMPONENTS AND THEIR MATERIALS)	-	0	-
6.1(COMPONENTS AND THEIR MATERIALS)	-	0	-
6.11(COMPONENTS AND THEIR MATERIALS)	-	0	-
6.12(COMPONENTS AND THEIR MATERIALS)	-	0	-
6.13(COMPONENTS AND THEIR MATERIALS)	-	0	-
6.14(COMPONENTS AND THEIR MATERIALS)	-	0	-
6.15(COMPONENTS AND THEIR MATERIALS)	-	0	-
6.16(COMPONENTS AND THEIR MATERIALS)	-	0	-
6.17(COMPONENTS AND THEIR MATERIALS)	-	0	-
7.7.1(Insulation Resistance)	-	0	-
7.7.2(High Voltage Test)	-	0	-
7.7.3(Cooling capacity rating test)	-	0	-
7.7.4(Maximum operating conditions)	-	0	-
7.8.2(Performance test)	-	0	-
6.1(COMPONENTS AND THEIR MATERIALS)	-	0	-
6.2(COMPONENTS AND THEIR MATERIALS)	-	0	-
6.3(COMPONENTS AND THEIR MATERIALS)	-	0	-
6.4(COMPONENTS AND THEIR MATERIALS)	-	0	-
6.5(COMPONENTS AND THEIR MATERIALS)	-	0	-
6.6(COMPONENTS AND THEIR MATERIALS)	-	0	-
6.7(COMPONENTS AND THEIR MATERIALS)	-	0	-
6.8(COMPONENTS AND THEIR MATERIALS)	-	0	-
6.9(COMPONENTS AND THEIR MATERIALS)	-	0	-
6.1(COMPONENTS AND THEIR MATERIALS)	-	0	-
6.11(COMPONENTS AND THEIR MATERIALS)	-	0	-
6.12(COMPONENTS AND THEIR MATERIALS)	-	0	-
6.13(COMPONENTS AND THEIR MATERIALS)	-	0	-
6.14(COMPONENTS AND THEIR MATERIALS)	-	0	-
6.15(COMPONENTS AND THEIR MATERIALS)	-	0	-
6.16(COMPONENTS AND THEIR MATERIALS)	-	0	-
6.17(COMPONENTS AND THEIR MATERIALS)	-	0	-
7.7.1(Insulation Resistance)	-	0	-
7.7.2(High Voltage Test)	-	0	-
7.7.3(Cooling capacity rating test)	-	0	-
7.7.4(Maximum operating conditions)	-	0	-
7.8.2(Performance test)	-	0	-

20 Jun, 2028

-
Included w.e.f. 19.03.2024

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number