BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15656 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

8761

MSME TESTING CENTRE, CHENNAI

6106704

IS 398 : Part 3 (1976)

Specification for aluminium conductors for overhead transmission purposes: Part 3 aluminium conductors, aluminized steel reinforced (Second Revision)

3150 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1 Table-1(Dimensional measurement of wires)	-	630	for 7 stands
12.2 Table 1(Breaking Load Test- Before Stranding)	-	1080	for 7 stands
12.2 Table 1(Breaking Load Test- After Stranding)	-	1080	for 7 stands
12.3 Table 1(Elongation Test- After Stranding)	-	450	for 7 stands
12.3 Table 1(Elongation Test- Before Stranding)	-	450	for 7 stands
12.4 Table 1(Resistance of Aluminium wire)	-	630	for 7 stands
9.2 Table 3(Lay Ratio of stranded conductors)	-	360	for 7 stands

31 Dec, 2026

-
-

8762

MSME TESTING CENTRE, CHENNAI

6106704

IS 398 : Part 1 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 1 aluminium stranded conductors (Third Revision)

All Size

7300 View breakup
(for 7 strands)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.2, Table-1(Measurement of diameter of individual aluminium wire)	-	700	For 7 strand
12.3, Table-1(Breaking load before stranding)	-	1200	For 7 strand
12.3, Table-1(Breaking load after stranding)	-	1200	For 7 strand
12.4(Wrapping test)	-	700	For 7 strand
12.5, Table 1(Resistance test)	-	700	For 7 strand
12.6, Table 3(Measurement of lay ratio)	-	400	For 7 strand
9.3(Stranding)	-	100	For 7 strand
6(Freedom from defects)	-	100	For 7 strand
7.2.1(Sizes)	-	100	For 7 strand
8, 8.1, 8.2(Joint in wires, except during stranding)	-	500	For 7 strand
9.2(Lay ratio)	-	400	For 7 strand
4.1(Resistivity)	-	700	For 7 strand
4.2(Density)	-	500	For 7 strand

31 Dec, 2026

-
-

8763

MSME TESTING CENTRE, CHENNAI

6106704

IS 3975 (1999)

Low carbon galvanized steel wires, formed wires and tapes for armouring of cables - Specification (Third Revision)

6400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
14 (a)(Marking)	-	100	OK
14 (b)(Marking)	-	100	OK
14 (c)(Marking)	-	100	OK
14 (d)(Marking)	-	100	OK
14 (e)(Marking)	-	100	OK
14 (f)(Marking)	-	100	OK
14 (g)(Marking)	-	100	OK
14.2(Marking)	-	100	OK
7(Dimensions)	-	250	OK
11(Freedom from defects)	-	249.97	OK
9.1(Galvanizing Requirements )	-	750	OK
9.2(Galvanizing Requirements )	-	1000	OK
9.3(Galvanizing Requirements )	-	1000	OK
8.1(Mechanical Properties (as per table 5 of IS 1608))	-	700	OK
8.2(Mechanical Properties (as per IS 1717))	-	600	OK
8.3(Mechanical Properties (as per IS 1755))	-	300	OK
8.4(Mechanical Properties (as per IS 10810(Part- 42)))	-	400	OK
Clause 6.1, Table-1(Sulphur)	-	300	OK
Clause 6.1, Table-1(Phosphorus)	-	300	OK
6.2( Nitrogen%)	-	250	OK
6.2(Phosphorus %)	-	250	OK
6.2(Sulphur %)	-	250	OK

31 Dec, 2026

-
-

8764

International Centre for Automotive Technology, Gurugram

8123735

IS 16333 : Part 3 (2017)

Mobile phone handsets: Part 3 indian language support for mobile phone handsets - Specific requirements (First Revision)

20900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1(Inputting of text)	-	15900		Inputting Test
5.2(Message Readability)	-	5000		Marking

31 Dec, 2026

-
-

8765

International Centre for Automotive Technology, Gurugram

8123735

IS 16192 : Part 1 (2014)

Automotive vehicles - Wheel rims for two and three wheeled vehicles: Part 1 light alloy wheel rims - Method of tests and requirements

Light Alloy Wheel Rims-2 & 3 Wheelers

159580 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.1(Rotation Bending Fatigue Test (Dynamic Cornering Fatigue Test))	-	29625	Rotation Bending Fatigue Test (Dynamic Cornering fatigue Test)
4.2.2(Rotation Bending Fatigue Test (Dynamic Cornering Fatigue Test) No. of cycle 105)	-	29625	Rotation Bending Fatigue Test (Dynamic Cornering fatigue Test)
4.3.1(Radial Load Durability Test)	-	66040	Radial Load Durability Test
4.3.2(Radial load durability tests ,No of cycle 5 x 105)	-	66040	Radial Load Durability Test
4.4.1(Radial Impact Resistance Test)	-	18795	Radial Impact Resistance Test
4.5.1(Torsion Moment Test)	-	29400	Torsion Moment Test
4.6.1(Air Leak Test (Tubeless Tyres Wheel Rim))	-	15720	Not Applicable for Tube type Wheel Rim

31 Dec, 2026

-
-

8766

International Centre for Automotive Technology, Gurugram

8123735

IS 16192 : Part 2 (2014)

Automotive vehicles - Wheel rims for two and three wheeled vehicles: Part 2 sheet metal wheel rims - Method of tests and requirements

Sheet Metal Rim for 2 & 3 Wheelers

99390.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.3(Dynamic Cornering Fatigue Test)	-	46558	Dynamic Cornering Fatigue Test for Sheet Metal wheel rims for two wheeler
4.2.3.4(a) For three wheeled vehicles: 18000 load cycle)	-	38458	Dynamic Cornering Fatigue Test for Sheet Metal wheel rims for three wheeler
4.2.3.4(b) For two wheeled vehicles:no of cycle 105 )	-	46558	Dynamic Cornering Fatigue Test for Sheet Metal wheel rims for two wheeler
4.2.4(Dynamic Radial Fatigue Test (RFT))	-	52832	Dynamic Cornering Fatigue Test for Sheet Metal wheel rims for two & three wheeler

31 Dec, 2026

-
-

8767

International Centre for Automotive Technology, Gurugram

8123735

IS 9436 (2018)

Performance requirements and methodsof test for wheels for passenger cars, quadricycles and mini goods cariers (First Revision)

Passenger Cars, Quadricycles & Mini Goods Carrier

101500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.1 table 2 (Cl 5.1 dynamic cornering fatigue test. Test factors and minimum cycle for requirements for wheels in normal Highway service dynamic cornering fatigue clause 5.1.3 5.1.4 and A-1 table 2)	-	36390	Dynamic Cornering Fatigue Test for Aluminum Alloy Wheel Rim
Cl 5.1 table 2 i)( ferrous all)	-	23917	Dynamic Cornering Fatigue Test for Ferrous Wheel rim
Cl 5.1 table 2 ii)( cold formed aluminium 5000 series)	-	36390	Dynamic Cornering Fatigue Test for Aluminum Alloy Wheel rim
Cl 5.1 table 2 iii)( aluminium cast and forged)	-	36390	Dynamic Cornering Fatigue Test for Aluminum Alloy Wheel rim
Cl 5.1 table 4(Cl.5.2dynamic cornering fatigue test.table 4 factors and minimum cycle requirements for temporary use wheels clause5.1.4 Amd-1)	-	23917	Dynamic Cornering Fatigue Test for Ferrous Wheel rim
Cl 5.1 table 4 i)( ferrous all)	-	23917	Dynamic Cornering Fatigue Test for Ferrous Wheel rim
Cl 5.1 table 4 ii)( cold formed aluminium 5000 series)	-	36390	Dynamic Cornering Fatigue Test for Aluminum Alloy Wheel rim
Cl 5.1 table 4 iii)( aluminium cast and forged)	-	36390	Dynamic Cornering Fatigue Test for Aluminum Alloy Wheel rim
Cl.5.2 table 3(Cl 5.2 dynamic radial Fatigue testTest factors and minimum cycle for requirements for wheels in normal Highway service dynamic Radial fatigue test clause 5.2.3 5.2.4 and A-1 table 3)	-	65110	Dynamic Radial Fatigue Test for Aluminum Alloy Wheel rim
Cl 5.2 table 3 i)(ferrous all)	-	47643	Dynamic Radial Fatigue Test for Ferrous Wheel rim
Cl 5.2 table 3 i)(Alluminium All)	-	65110	Dynamic Radial Fatigue Test for Aluminum Alloy Wheel rim
Cl.5.2 table 5(Cl 5.2 dynamic radial Fatigue test Test factors and minimum cycle for temporary use wheels Dynamic Radial fatigue test clause 5.2.4 and A-1 table 5)	-	65110	Dynamic Radial Fatigue Test for Aluminum Alloy Wheel rim
Cl 5.2 table 5 i)(ferrous all)	-	47643	Dynamic Radial Fatigue Test for Ferrous Wheel rim
Cl 5.2 table 5 i)(Alluminium All)	-	65110	Dynamic Radial Fatigue Test for Aluminum Alloy Wheel rim

31 Dec, 2026

-
-

8768

International Centre for Automotive Technology, Gurugram

8123735

IS 9438 (2018)

Performance requirements and methods of tests for wheels/ rims for trucks and buses (First Revision)

Wheel Rims for Trucks & Buses

264747 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.1 table 1(cl 5.2 dynamic radial Fatigue test (For Disc Wheels and wheels with Demountable Rims, Test factors for dynamic Radial Fatigue Test Loading method and Minimum No.of Performnace cycle clause 5.2.2 and 5.2.4 table 2)	-	123979	Dynamic Cornering fatigue Test for Aluminum Alloy Wheel Rim
Cl 5.1 table 1 i)(material Ferrous rim diametre 13 Accelerated test Factor 1.60)	-	31420	Dynamic Cornering fatigue Test for Ferrous Wheel Rim- Diameter 13" & accelerated test factor- 1.60
Cl 5.1 table 1 i)(material Ferrous rim diametre 14 Accelerated Test Factor 1.60)	-	31420	Dynamic Cornering fatigue Test for Ferrous Wheel Rim- Diameter 14" & accelerated test factor- 1.60
Cl 5.1 table 1 i)(material Ferrous rim diametre 15 Accelerated Test Factor 1.60)	-	31420	Dynamic Cornering fatigue Test for Ferrous Wheel Rim- Diameter 15" & accelerated test factor- 1.60
Cl 5.1 table 1 ii)(material Ferrous rim diametre 16 and aboveAccelerated Test Factor 1.45)	-	31420	Dynamic Cornering fatigue Test for Ferrous Wheel Rim- Diameter 16" & above and accelerated test factor- 1.45
Cl 5.1 table 1 iii)(material Ferrous rim any diametreAccelerated Test Factor 1.10)	-	62840	Dynamic Cornering fatigue Test for Ferrous Wheel Rim- Any Diameter & above and accelerated test factor- 1.10
Cl 5.1 table 1 ii)(material Ferrous rim any diametre and above Accelerated Test Factor 1.30)	-	62840	Dynamic Cornering fatigue Test for Ferrous Wheel Rim- Any Diameter & above and accelerated test factor- 1.30
Cl 5.1 table 1 iv)(material Alluminum rim diametre 16 and above Accelerated Test Factor 1.35)	-	123979	Dynamic Cornering fatigue Test for Aluminum Alloy Wheel Rim- Diameter 16" & above and accelerated test factor- 1.35
Cl 5.1 table 1 iv)(material Alluminum rim diametre 16 and above Accelerated Test Factor 1.63)	-	123979	Dynamic Cornering fatigue Test for Aluminum Alloy Wheel Rim- Diameter 16" & above and accelerated test factor- 1.63
Cl 5.1 table 1 v)(material Alluminum rim diametre 17.5 and larger Accelerated Test Factor 1.35)	-	123979	Dynamic Cornering fatigue Test for Aluminum Alloy Wheel Rim- Diameter 17.5" & larger and accelerated test factor- 1.35
Cl.5.2 table 2(Cl 5.2 dynamic radial Fatigue test (For Disc Wheels and wheels with Demountable Rims, Test factors for dynamic Radial Fatigue Test Loading method and Minimum No.of Performnace cycle clause 5.2.2 and 5.2.4 table 2)	-	140768	Dynamic Radial fatigue Test for Aluminum Alloy Wheel Rim
Cl.5.2 table 2 i(Material Ferrous rim diametre 13 (5˚˚ drop centre) Accelerated Test Factor 2.2, (Inset or Outset - All ))	-	66930	Dynamic Radial fatigue Test for Ferrous Wheel Rim-Diameter 13"(5° drop centre) & accelerated test factor-2.2
Cl.5.2 table 2 i(Material Ferrous rim diametre 14 and (5˚˚ drop centre) Accelerated Test Factor 2.2, (Inset or Outset - All ))	-	66930	Dynamic Radial fatigue Test for Ferrous Wheel Rim-Diameter 14"(5° drop centre) & accelerated test factor-2.2
Cl.5.2 table 2 i(Material Ferrous rim diametre 15 and (5˚˚ drop centre) Accelerated Test Factor 2.2, (Inset or Outset - All ))	-	66930	Dynamic Radial fatigue Test for Ferrous Wheel Rim-Diameter 15"(5° drop centre) & accelerated test factor-2.2
Cl.5.2 table 2 i(Material Ferrous rim diametre 16 and (5˚˚ drop centre) Accelerated Test Factor 2.2, (Inset or Outset - All ))	-	66930	Dynamic Radial fatigue Test for Ferrous Wheel Rim-Diameter 16"(5° drop centre) & accelerated test factor-2.2
Cl.5.2 table 2 i(Material Ferrous rim diametre 17 and (5˚˚ drop centre) Accelerated Test Factor 2.2, (Inset or Outset - All ))	-	66930	Dynamic Radial fatigue Test for Ferrous Wheel Rim-Diameter 17"(5° drop centre) & accelerated test factor-2.2
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 15 Accelerated Test Factor 2.0 , (Inset or Outset - All ))	-	66930	Dynamic Radial fatigue Test for Ferrous Wheel Rim-Diameter 15" & accelerated test factor-2.0
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 17 and Accelerated Test Factor 2.0, (Inset or Outset - All ))	-	66930	Dynamic Radial fatigue Test for Ferrous Wheel Rim-Diameter 17" & accelerated test factor-2.0
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 18 and Accelerated Test Factor 2.0, (Inset or Outset - All ))	-	66930	Dynamic Radial fatigue Test for Ferrous Wheel Rim-Diameter 18" & accelerated test factor-2.0
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 20 and Accelerated Test Factor 2.0, (Inset or Outset - All ))	-	66930	Dynamic Radial fatigue Test for Ferrous Wheel Rim-Diameter 20" & accelerated test factor-2.0
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 22 and Accelerated Test Factor 2.0, (Inset or Outset - All ))	-	66930	Dynamic Radial fatigue Test for Ferrous Wheel Rim-Diameter 22" & accelerated test factor-2.0
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 24 and Accelerated Test Factor 2.0 , (Inset or Outset - All ))	-	66930	Dynamic Radial fatigue Test for Ferrous Wheel Rim-Diameter 24" & accelerated test factor-2.0
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 17.5 HC and Accelerated Test Factor 2.0 , (Inset or Outset - All ))	-	66930	Dynamic Radial fatigue Test for Ferrous Wheel Rim-Diameter 17.5HC & accelerated test factor-2.0
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 19.5 and Accelerated Test Factor 2.0 , (Inset or Outset - All ))	-	66930	Dynamic Radial fatigue Test for Ferrous Wheel Rim-Diameter 19.5" & accelerated test factor-2.0
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 22.5 and Accelerated Test Factor 2.0 , (Inset or Outset - All ))	-	66930	Dynamic Radial fatigue Test for Ferrous Wheel Rim-Diameter 22.5" & accelerated test factor-2.0
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 24.5 and Accelerated Test Factor 2.0 , (Inset or Outset - All ))	-	66930	Dynamic Radial fatigue Test for Ferrous Wheel Rim-Diameter 24.5" & accelerated test factor-2.0
Cl.5.2 table 2 iii)(Material Aluminium rim diametre 16 and Accelerated Test Factor 2.8 , (Inset or Outset - 127 or more ))	-	140768	Dynamic Radial fatigue Test for Aluminum Alloy Wheel Rim-Diameter 16" & above and accelerated test factor-2.0
Cl.5.2 table 2 iv)(Material Aluminium rim diametre 17.5 and larger . Accelerated Test Factor 2.8 , (Inset or Outset - All ))	-	140768	Dynamic Radial fatigue Test for Aluminum Alloy Wheel Rim-Diameter 17.5" & larger and accelerated test factor-2.0
Cl.5.3 table 3 (Cl 5.3 dynamic Cornering Fatigue test (For wheels with Demountable Rims), Test Load factors for Wheels with demountable Rims - Dynamic cornerning Fatigue test clause 5.3.4 and 5.3.5 table 3)	-	31420	Dynamic Cornering fatigue Test for Wheels with Demountable Rims
Cl.5.3 table 3 i) (Accelerated test factor 1.9 Coefficient of friction 0.7)	-	31420	Dynamic Cornering fatigue Test for Ferrous Wheels with Demountable Rims & accelerated test factor-1.9
Cl.5.3 table 3 i) (Material Ferrous All, Accelerated test factor 1.5 Coefficient of friction 0.7)	-	31420	Dynamic Cornering fatigue Test for Ferrous Wheels with Demountable Rims & accelerated test factor-1.5
Cl.5.2 table 2 iii)(Material Aluminium rim diametre 16 and Accelerated Test Factor 2.0 , (Inset or Outset - 127 or more ))	-	140768	Dynamic Radial fatigue Test for Aluminum Alloy Wheel Rim-Diameter 16" and accelerated test factor-2.0
Cl.5.2 table 2 iv)(Material Aluminium rim diametre 17.5 and larger . Accelerated Test Factor 2.0 , (Inset or Outset - All ))	-	140768	Dynamic Radial fatigue Test for Aluminum Alloy Wheel Rim-Diameter 17.5" & larger and accelerated test factor-2.0

31 Dec, 2026

-
-

8769

International Centre for Automotive Technology, Gurugram

8123735

IS 16192 : Part 3 (2018)

Automotive vehicles - Wheel rims for two and three wheeled vehicles: Part 3 Spoke Wheel Rims ---Method of tests and requirements

Spoke Wheel Rim-2 & 3 wheeler

12240.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2(Strength Requirements refer table -1 & table -2)	-	12240		Strength Test for Spoke wheel rims for two & three wheeler as per Cl. No. 4.2 of IS:16192(P3)-2018 with Amend. No.1, 2021
4.2(Strength Requirements refer table -1 & table -2)	-	12240		Strength Test for Spoke wheel rims for two & three wheeler as per Cl. No. 4.2 of IS:16192(P3)-2018 with Amend. No.1, 2021

31 Dec, 2026

-
-

8770

International Centre for Automotive Technology, Gurugram

8123735

IS 2553 : Part 2 (2019)

Safety glass - Specification: Part 2 for road transport (First Revision)

141983 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(Light Transmittance)	-	4760	GST Extra
5.1.1(Light Transmittance)	-	4760	GST Extra
5.1.2.1(Resistance to Abrasion)	-	18210	For complete Cl. No. 5.1.2
5.1.2.2(Resistance to Abrasion)	-	18210	For complete Cl. No. 5.1.2
5.1.2.3.1(Resistance to Abrasion)	-	18210	GST Extra
5.1.2.3.1(Resistance to Abrasion)	-	18210	For complete Cl. No. 5.1.2
5.1.2.3.2(Resistance to Abrasion)	-	18210	For complete Cl. No. 5.1.2
5.1.2.3.2(Resistance to Abrasion)	-	18210	For complete Cl. No. 5.1.2
5.2.1(Resistance to Temperature Changes)	-	3500	GST Extra
5.2.2(a) Resistance to Fire)	-	13556	GST Extra
5.2.2(b) Resistance to Fire)	-	13556	GST Extra
5.3.1 (Resistance to Radiation)	-	9297	GST Extra
5.3.2(Resistance to High Temperature)	-	2023	GST Extra
5.3.3.1(Resistance to Humidity)	-	25979	GST Extra
5.3.3.2(Resistance to Humidity)	-	25979	GST Extra
5.3.3.2(Resistance to Humidity)	-	25979	GST Extra
5.3.3.3(Resistance to Humidity)	-	25979	GST Extra
5.4.1(Optical Distortion)	-	7141	For complete Cl. No. 5.4.1
5.4.1.3 (Optical Distortion)	-	7141	For complete Cl. No. 5.4.1
5.4.2.3(Secondary image separation test)	-	7141	For complete Cl. No. 5.4.2
5.4.3.1(Head-form Test (Location of crack))	-	7141	For complete Cl. No. 5.4.2
5.4.3.2(Head-form Test (Interlayer adhesion))	-	7360	For complete Cl. No. 5.4.3
5.4.3.3.1(Head-form Test)	-	7360	For complete Cl. No. 5.4.3
5.4.3.3.2(Head-form Test)	-	7360	For complete Cl. No. 5.4.3
5.4.4(2.260 g Ball)	-	6151	GST Extra
5.4.5.1(227 g Ball)	-	5008	For complete Cl. No. 5.4.5
5.4.5.2(227 g Ball)	-	5008	For complete Cl. No. 5.4.5
5.4.5.3(227 g Ball)	-	5008	For complete Cl. No. 5.4.5
5.4.5.4(227 g Ball)	-	5008	For complete Cl. No. 5.4.5
5.5.1.1.1(Fragmentation Test)	-	4015	For complete cl. no. 5.5.1.1 and ROC > 200 mm
5.5.1.1.4(Fragmentation Test)	-	4015	For complete cl. no. 5.5.1.1 and ROC > 200 mm
5.5.1.1.5(Fragmentation Test)	-	4015	For complete cl. no. 5.5.1.1 and ROC > 200 mm
5.5.1.1.5.1(Fragmentation Test)	-	4015	For complete cl. no. 5.5.1.1 and ROC > 200 mm
5.5.1.1.5.2(Fragmentation Test)	-	4015	For complete cl. no. 5.5.1.1 and ROC > 200 mm
5.5.1.2(227 g ball test)	-	1941	GST Extra
5.5.2.1.1(227 g ball test)	-	6188	GST Extra
5.5.2.1.2(227 g ball test)	-	6188	GST Extra
5.5.2.1.3(227 g ball test)	-	6188	GST Extra
5.5.3.1(equirements Applicable only to Double-Glazed Units-Individual components)	-	15354	GST Extra
5.5.3.2.1( Head-form Test)	-	9094	GST Extra
5.5.3.2.2.1( Head-form Test)	-	9094	GST Extra
5.5.3.2.2.2( Head-form Test)	-	9094	GST Extra
5.5.3.2.2.3( Head-form Test)	-	9094	GST Extra
5.5.3.2.3-a( Head-form Test)	-	9094	GST Extra
5.5.3.2.3-b-1( Head-form Test)	-	9094	GST Extra
5.5.3.2.3-b-2( Head-form Test)	-	9094	GST Extra
5.5.3.2.3-b-3( Head-form Test)	-	9094	GST Extra
5.6.1.7( Head-form Test)	-	9094	GST Extra
5.6.1.8( Head-form Test-The HIC value )	-	9094	GST Extra
5.6.2.4-a(Mechanical Strength Test — 227g Ball)	-	6188	GST Extra
5.6.2.4-b(Mechanical Strength Test — 227g Ball)	-	6188	GST Extra
5.6.2.5(Mechanical Strength Test — 227g Ball test at –18° ± 2°C)	-	6188	GST Extra
5.6.2.5(Mechanical Strength Test — 227g Ball test at –18° ± 2°C)	-	6188	GST Extra
5.6.3.3(Flexibility and Fold Test)	-	8700	GST Extra
5.6.4.4-a(Weathering)	-	23456	GST Extra
5.6.4.4-b(Weathering)	-	23456	GST Extra
5.6.5.3-a(Cross-cut)	-	11490	GST Extra
5.6.5.3-b-1(Cross-cut)	-	11490	GST Extra
5.7.1.1(227 g Ball Test at 20 ± 5°C)	-	6188	GST Extra
5.7.2.1(227g Ball Test at –18° ± 2°C)	-	6188	GST Extra
5.7.3.1(Flexibility Test and Fold Test)	-	8700	GST Extra
5.7.3.1(Flexibility Test and Fold Test)	-	8700	GST Extra

31 Dec, 2026

-
-

8771

International Centre for Automotive Technology, Gurugram

8123735

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

Information Technology Equipment

166250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.6(Power interface .)	-	5000	NA
1.7(Markings and instructions)	-	3000	NA
2.1(Protection from electric shock and energy hazards)	-	2000	NA
2.2(SELV circuits)	-	4500	NA
2.3(TNV circuits)	-	4500	NA
2.4(Limited current circuits)	-	4000	NA
2.5(Limited power sources .)	-	2000	NA
2.6(Provisions for earthing and bonding)	-	3000	NA
2.7(Overcurrent and earth fault protection in primary circuits)	-	2000	NA
2.8(Safety interlocks)	-	8000	NA
2.9(Electrical insulation)	-	5000	NA
2.10(Clearances, creepage distances and distances through insulation)	-	6000	NA
3.1(General)	-	1000	NA
3.2(Connection to a mains supply)	-	2000	NA
3.3(Wiring terminals for connection of external conductors)	-	15000	NA
3.4(Disconnection from the mains supply)	-	2500	NA
3.5(Interconnection of equipment)	-	4000	NA
4.1(Stability)	-	3520	NA
4.2(Mechanical strength)	-	7000	NA
4.3(Design and construction)	-	1000	NA
4.4(Protection against hazardous moving parts)	-	1000	NA
4.5(Thermal requirements)	-	5000	NA
4.6(Openings in enclosures)	-	7000	NA
4.7(Resistance to fire)	-	5000	NA
5.1(Touch current and protective conductor curren)	-	13000	NA
5.2(Electric strength)	-	15000	NA
5.3(Abnormal operating and fault conditions)	-	10000	NA
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	5230	NA
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	5000	NA
6.3(Protection of the telecommunication wiring system from overheating)	-	5000	NA
7.1(General)	-	1000	NA
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	1000	NA
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	1000	NA
7.4(Insulation between primary circuits and cable distribution systems)	-	7000	NA

31 Dec, 2026

-
-

8772

International Centre for Automotive Technology, Gurugram

8123735

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

152000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	500	nil
7(Heating under normal operating conditions)	-	0	nil
8(Constructional requirements with regard to the protection against electric shock)	-	10000	nil
9(Electric shock hazard under normal operating conditions)	-	4000	nil
10(Insulation requirements)	-	7000	nil
11(Fault conditions)	-	15000	nil
12(Mechanical strength)	-	10000	nil
13(CLEARANCES and CREEPAGE DISTANCES)	-	15000	nil
15(TERMINALS)	-	3000	nil
16(External flexible cords)	-	10000	nil
17(Electrical connections and mechanical fixings)	-	15000	nil
19(Stability and mechanical hazards)	-	30000	nil
20(Resistance to fire)	-	15000	nil
Cl.5.1 of Cl.5(General requirements)	-	500	nil
Cl.5.1-i) of Cl.5(Comprehensible and easily discernible)	-	0	nil
Cl.5.1-ii) of Cl.5(Permanent durability against water and petroleum spirit)	-	0	nil
Cl.5.2 of Cl.5(Identification and supply ratings)	-	500	nil
Cl.5.2 a) of Cl.5(Identification, maker)	-	0	nil
Cl.5.2 b) of Cl.5(Model number or type reference)	-	0	nil
Cl.5.2 d) of Cl.5(Nature of supply)	-	0	nil
Cl.5.2 e) of Cl.5(Rated supply voltage)	-	0	nil
Cl.5.2 f) of Cl.5(Mains frequency if safety dependant)	-	0	nil
Cl.5.2 g) of Cl.5(Rated current or power consumption for apparatus supplied by supply apparatus for general use, on apparatus or in instruction manual: Measured current or power consumption: Deviation % (max 10%):)	-	0	nil
Cl.5.2 h) of Cl.5(Rated current or power consumption for apparatus intended for connection to an a.c. mains supply:Measured current or power consumption for Television set: Deviation % (max 10%):)	-	0	nil
Cl.5.2 h)-i) of Cl.5(appliance coupler for Class I is used for Class II equipment with functional earth connection, the requirements of Clause 15 and Clause 16 related to Class I construction shall be applied up to the connecting point of the protective(earthing) conductor to the functional earth.)	-	0	nil
Cl.5.2 h)-ii) of Cl.5(Graphical symbols placed on the apparatus, whether required by this standard or not, shall be in accordance with IEC 60417 or ISO 3864-2 or ISO 7000, if available. In the absence of suitable symbols, the manufacturer may design specific graphical symbols.)	-	0	nil
Cl.5.2 h)-iii) of Cl.5(Care shall be taken so that additional markings and instructions not required by this standard do not contradict the markings and instructions required by this standard . Symbols placed on the Equipment shall be explained in the user manual.)	-	0	nil
Cl.5.3 of Cl.5(Terminals)	-	500	nil
Cl.5.3a) of Cl.5(Earth terminal)	-	0	nil
Cl.5.3b) of Cl.5(Hazardous live terminals)	-	0	nil
Cl.5.3c) of Cl.5(Markings on supply output terminals)	-	0	nil
Cl.5.4 of Cl.5(Caution marking)	-	500	nil
Cl.5.4a) of Cl.5(Use of triangle with exclamation mark)	-	0	nil
Cl.5.4b) of Cl.5(Marking on loudspeaker grille, IEC 60417-5036)	-	0	nil
Cl.5.4c) of Cl.5(User-replaceable coin / button cell battery marking)	-	0	nil
Cl.5.5 of Cl.5(Instructions)	-	500	nil
Cl.5.5.1 of Cl.5.5(Safety relevant information)	-	0	nil
Cl.5.5.2 a) of Cl.5.5(Mains powered equipment not exposed to dripping or splashing. Warning concerning objects filled with liquid, etc.)	-	0	nil
Cl.5.5.2 b) of Cl.5.5(Hazardous live terminals, instructions for wiring)	-	0	nil
Cl.5.5.2 c) of Cl.5.5(Instructions for replacing lithium battery)	-	0	nil
Cl.5.5.2 d) of Cl.5.5(Class I earth connection warning)	-	0	nil
Cl.5.5.2 e) of Cl.5.5(Instructions for multimedia system connection)	-	0	nil
Cl.5.5.2 f) of Cl.5.5(Special stability warning for attachment of the apparatus to the floor/wall)	-	0	nil
Cl.5.5.2 g) of Cl.5.5(Warning: battery exposure to heat)	-	0	nil
Cl.5.5.2 h) of Cl.5.5(Warning: protective film on CRT face)	-	0	nil
Cl.5.5.2 i) of Cl.5.5("Warning: Non-floor standing TV >7kg")	-	0	nil
Cl.5.5.2 j) of Cl.5.5("Warning: User replaceable coin / button cell battery")	-	0	nil
Cl.5.5.3 (a-b) of Cl.5.5(Disconnect device: plug/coupler or all-pole mains switch location, accessibility and markings)	-	0	nil
Cl.5.5.3 c) of Cl.5.5(Instructions for permanently connected equipment)	-	0	nil
Cl.5.5.3 c) i) of Cl.5.5(Marking, signal lamps or similar for completely disconnection from the mains)	-	0	nil
Cl.7.1 of Cl.7(General)	-	5000	nil
"Cl.7.1.1 of Cl.7.1 Table-3"(Requirements)	-	0	nil
"Cl.7.1.2 of Cl.7.1 Table-3"(Accessible parts)	-	0	nil
"Cl.7.1.3 of Cl.7.1 Table-3"(Parts, other than windings and printed boards, providing electrical insulation)	-	0	nil
"Cl.7.1.4 of Cl.7.1 Table-3"(Parts acting as a support or a mechanical barrier)	-	0	nil
"Cl.7.1.5 of Cl.7.1 Table-3"(Windings)	-	0	nil
"Cl.7.1.6 of Cl.7.1 Table-3"(Parts not subject to a limit under7.1.1 to 7.1.4)	-	0	nil
Cl.7.2 of Cl.7(Softening temperature of insulating material supporting parts conductively connected to the mains carrying a current> 0.2 A, shall be at least 150ºC)	-	10000	nil
Cl.8.1 of Cl.8(Conductive parts covered by lacquer, paper, untreated textile oxide films and beads etc. considered to be bare*)	-	0	nil
Cl.8.2 of Cl.8(No shock hazard when changing voltage setting device, fuse-links or handling drawers etc.)	-	0	nil
Cl.8.3 of Cl.8(Insulation of hazardous live parts not provided by hygroscopic material)	-	0	nil
Cl.8.4 of Cl.8(No risk of electric shock from accessible parts or from parts rendered accessible following the removal of a cover which can be removed by hand)	-	0	nil
Cl.8.5 of Cl.8(Class I apparatus*)	-	0	nil
Cl.8.5 i) of Cl.8(Basic insulation between hazardous live parts and earthed accessible parts *)	-	0	nil
Cl.8.5 ii) of Cl.8(Resistors bridging basic insulation shall complying with 14.1 a) *)	-	0	nil
Cl.8.5 iii) of Cl.8(Capacitors bridging basic insulation shall complying with 14.2.1 a) *)	-	0	nil
Cl.8.5 iv) of Cl.8(Protective earthing terminal *)	-	0	nil
Cl.8.6 of Cl.8(Class II apparatus)	-	0	nil
Cl.8.6 a) of Cl.8(Basic and supplementary insulation between hazardous live parts and accessible parts *)	-	0	nil
Cl.8.6 b) of Cl.8(Reinforced insulation between hazardous live parts and accessible parts *)	-	0	nil
Cl.8.7 of Cl.8(Components bridging insulation)	-	0	nil
Cl.8.7 i) of Cl.8(Basic insulation bridged by components complying with 14.4.5.3)	-	0	nil
Cl.8.7 ii) of Cl.8(Components bridging basic, supplementary, double or reinforced insulation complying with 14.2 a) or 14.4)	-	0	nil
Cl.8.7 iii) of Cl.8(Basic and supplementary insulation each being bridged by a capacitor or RC-unit complying with 14.3.2 a))	-	0	nil
Cl.8.7 iv) of Cl.8(Double or reinforced insulation being bridged with 2 capacitors or RC-units in series complying with 14.3.2 a))	-	0	nil
Cl.8.7 v) of Cl.8(Double or reinforced insulation being bridged with a single capacitor or RC-unit complying with 14.3.2 b))	-	0	nil
Cl.8.8 of Cl.8(Insulation thickness and thin sheet materials)	-	0	nil
Cl.8.8 i) of Cl.8(Basic or supplementary insulation > 0,4 mm (mm)*)	-	0	nil
Cl.8.8 ii) of Cl.8(Reinforced insulation > 0,4 mm (mm) *)	-	0	nil
Cl.8.8 iii) of Cl.8(Thin sheet material used inside the equipment)	-	0	nil
Cl.8.8 iv) of Cl.8(Basic or supplementary insulation, atleast two layers, each meeting10.4)	-	0	nil
Cl.8.8 v) of Cl.8(Basic or supplementary insulation, three layers any two of which meet10.4)	-	0	nil
Cl.8.8 vi) of Cl.8(Reinforced insulation, two layers each of which meet 10.4)	-	0	nil
Cl.8.9 of Cl.8(Adequate insulation between internal hazardous live conductors and accessible parts, or between internal hazardous live parts and conductors connected to accessible parts)	-	0	nil
Cl.8.10 of Cl.8(Double insulation between accessible parts and conductors connected to the mains)	-	0	nil
Cl.8.10 of Cl.8(Double insulation between conductors connected to accessible parts and parts connected to the mains)	-	0	nil
Cl.8.11 of Cl.8(Detaching of wires)	-	0	nil
Cl.8.11 i) of Cl.8(Noun due reduction of creepage or clearance distances if wires become detached)	-	0	nil
Cl.8.11 ii) of Cl.8(Vibration test carried out)	-	0	nil
Cl.8.12 of Cl.8(Adequate fastening of windows, lenses, lamp covers etc. (pull test 20 N for 10 s))	-	0	nil
Cl.8.13 of Cl.8(Adequate fastening of windows, lenses, lamp covers etc. (pull test 20 N for 10 s))	-	0	nil
Cl.8.14 of Cl.8(No risk of damage to the insulation of internal wiring due to hot parts or sharp edges)	-	0	nil
Cl.8.15 of Cl.8(Only special supply equipment can be used*)	-	0	nil
Cl.8.16 of Cl.8(Insulated winding wire without additional interleaved insulation)	-	0	nil
Cl.8.18 of Cl.8(Disconnection from the mains)	-	0	nil
Cl.8.18 i) of Cl.8(Disconnect device used in apparatus)	-	0	nil
Cl.8.18 ii) of Cl.8(All-pole switch or circuit breaker with >3mm contact separation.)	-	0	nil
Cl.8.18 iii) of Cl.8(Mains switch ON indication *)	-	0	nil
Cl.8.19 of Cl.8(Switch not fitted in the mains cord *)	-	0	nil
Cl.8.20 of Cl.8(Bridging components comply with clause 14)	-	0	nil
Cl.8.21 of Cl.8(Non-separable thin sheet material)	-	0	nil
Cl.9.1 of Cl.9(Testing on the outside)	-	0	nil
Cl.9.1.1 of Cl.9.1(Requirements)	-	0	nil
Cl.9.1.1 i) of Cl.9.1(Accessible parts shall not be hazardous live)	-	0	nil
Cl.9.1.1 ii) of Cl.9.1(Inaccessible terminals are not accessible or comply with relevant requirements)	-	0	nil
Cl.9.1.1 iii) of Cl.9.1(For voltages >1000 V ac or >1500 V dc complies with clause 13.3.1 for basic insulation)	-	0	nil
Cl.9.1.1.2 of Cl.9.1.1(Determination of hazardous live parts)	-	0	nil
Cl.9.1.1.2 a) of Cl.9.1.1(Open circuit voltages)	-	0	nil
Touch current measured from terminal devices using the network in annex D(Touch current measured from terminal devices using the network in annex D)	-	0	nil
Cl.9.1.1.2 c) of Cl.9.1.1(The charge exceeds 45 μC)	-	0	nil
Cl.9.1.1.2 d) of Cl.9.1.1(Energy of discharge not exceeding 350 mJ)	-	0	nil
Cl.9.1.1.3 of Cl.9.1.1(Test with test finger and test probe)	-	0	nil
Cl.9.1.2 of Cl.9.1(Shafts of operating knobs, handles, levers and the like)	-	0	nil
Cl.9.1.3 of Cl.9.1(Openings ofthe enclosure)	-	0	nil
Cl.9.1.4 of Cl.9.1(Terminals)	-	0	nil
Cl.9.1.4 i) of Cl.9.1(Terminals)	-	0	nil
Cl.9.1.4 ii) of Cl.9.1(Terminals)	-	0	nil
Cl.9.1.5 of Cl.9.1(Pre-set controls)	-	0	nil
Cl.9.1.6 of Cl.9.1(Withdrawal of the mains plug:)	-	0	nil
Cl.9.1.6 i) of Cl.9.1(Withdrawal of the mains plug:)	-	0	nil
Cl.9.1.6 ii) of Cl.9.1(Withdrawal of the mains plug:)	-	0	nil
Cl.9.1.6 iii) of Cl.9.1(Withdrawal of the mains plug:)	-	0	nil
Cl.9.1.7 of Cl.9.1(Resistance to external forces)	-	0	nil
Cl.9.1.7 a) of Cl.9.1(Resistance to external forces)	-	0	nil
Cl.9.1.7 b) of Cl.9.1(Resistance to external forces)	-	0	nil
Cl.9.1.7 c) of Cl.9.1(Resistance to external forces)	-	0	nil
Cl.9.2 of Cl.9(Removal of protective covers)	-	0	nil
Cl.10.2 of Cl.10(Surge Test)	-	0	nil
Cl.10.2 a) of Cl.10(Surge Test)	-	0	nil
Cl.10.2 b) of Cl.10(Surge Test)	-	0	nil
Cl.10.2 b) (i) of Cl.10(Surge Test)	-	0	nil
Cl.10.2 b) (ii) of Cl.10(Surge Test)	-	0	nil
Cl.10.2 b) (iii) of Cl.10(Surge Test)	-	0	nil
Cl.10.3 of Cl.10(Humidity treatment)	-	0	nil
Cl.10.4 of Cl.10(Insulation resistance and dielectric strength)	-	0	nil
Cl.10.4.1 of Cl.10.4(Insulation of the insulating materials)	-	0	nil
Cl.10.4.2 of Cl.10.4(Between parts of different polarity directly connected to the mains Between parts of different polarity directly connected to the mains)	-	0	nil
Cl.10.4.2 i) of Cl.10.4(Between parts separated by BASIC or SUPPLEMENTARY insulation)	-	0	nil
Cl.10.4.2 ii) of Cl.10.4(Between parts separated by REINFORCED insulation)	-	0	nil
Cl.11.1 of Cl.11(Electric Shock Hazard)	-	0	nil
Cl.11.1 a) of Cl.11(Electric Shock Hazard)	-	0	nil
Cl.11.1 b) of Cl.11(Electric Shock Hazard)	-	0	nil
Cl.11.2 of Cl.11(Heating)	-	0	nil
Cl.11.2.1 of Cl.11.2(Requirements)	-	0	nil
Cl.11.2.1 i) of Cl.11.2(No danger of fire to the surroundings)	-	0	nil
Cl.11.2.1 ii) of Cl.11.2(Safety not impaired by abnormal heat)	-	0	nil
Cl.11.2.1 of Cl.11.2(Flames extinguish within 10 seconds)	-	0	nil
Cl.11.2.1 of Cl.11.2(No hazard from softening solder)	-	0	nil
Cl.11.2.1 of Cl.11.2(Soldered terminations not used as protective mechanism)	-	0	nil
Cl.11.2.2 of Cl.11.2(Measurement of temperature rises)	-	0	nil
Cl.11.2.3 of Cl.11.2(Accessible parts)	-	0	nil
Cl.11.2.4 of Cl.11.2(Parts, other than windings and printed boards, providing electrical insulation)	-	0	nil
Cl.11.2.5 of Cl.11.2(Parts acting as a support or a mechanical barrier)	-	0	nil
Cl.11.2.6 of Cl.11.2(Windings )	-	0	nil
Cl.11.2.7 of Cl.11.2(Printed boards)	-	0	nil
Cl.11.2.7 i) of Cl.11.2(Printed boards)	-	0	nil
Cl.11.2.7 ii) of Cl.11.2(Printed boards)	-	0	nil
Cl.11.2.7 iii) of Cl.11.2(Printed boards)	-	0	nil
Cl.11.2.8 of Cl.11.2(Parts not subject to a limit under7.1.1 to 7.1.4)	-	0	nil
Cl.12.1.1 of Cl.12.1(Requirements)	-	0	nil
Cl.12.1.2 of Cl.12.1(Bump test )	-	0	nil
Cl.12.1.3 of Cl.12.1(Vibration test)	-	0	nil
Cl.12.1.4 of Cl.12.1(Impact test)	-	0	nil
Cl.12.1.5 of Cl.12.1(Drop test)	-	0	nil
Cl.12.1.6 of Cl.12.1(Stress relief test)	-	0	nil
Cl.12.2 of Cl.12(Fixing of actuating elements)	-	0	nil
Cl.12.3 of Cl.12(Remote control devices held in hand)	-	0	nil
Cl.12.4 of Cl.12(Drawers )	-	0	nil
Cl.12.5 of Cl.12(Antenna coaxial sockets mounted on the apparatus)	-	0	nil
Cl.12.5 a) of Cl.12(Endurance test,)	-	0	nil
Cl.12.5 b) of Cl.12(Impact test,)	-	0	nil
Cl.12.5 c) of Cl.12(Torque test)	-	0	nil
Cl.12.6 of Cl.12(Telescoping or rod antennas)	-	0	nil
Cl.12.6.1 i) of Cl.12.6(General requirements)	-	0	nil
Cl.12.6.2 of Cl.12.6(Physical securement)	-	0	nil
Cl.12.7 of Cl.12(Apparatus containing coin / button cell batteries)	-	0	nil
Cl.12.7.1 of Cl.12.7(Coin/button cell batteries with a diameter of 32 mm or less.)	-	0	nil
Cl.12.7.2 of Cl.12.7(Construction requirementss)	-	0	nil
Cl.12.7.3.2 of Cl.12.7.3(Stress relief test)	-	0	nil
Cl.12.7.3.3 of Cl.12.7.3(Battery replacement test)	-	0	nil
Cl.12.7.3.4 of Cl.12.7.3(Drop test)	-	0	nil
Cl.12.7.3.5 of Cl.12.7.3(Impact test)	-	0	nil
Cl.12.7.3.6 of Cl.12.7.3(Crush test)	-	0	nil
Cl.12.7.4 of Cl.12.7(Compliance)	-	0	nil
Cl.13.1 of Cl.13(General)	-	0	nil
Cl.13.2 of Cl.13(Determination of Working voltage)	-	0	nil
Cl.13.3 of Cl.13(Clearances)	-	0	nil
Cl.13.3.1 of Cl.13.3(General)	-	0	nil
Cl.13.3.2 of Cl.13.3(Clearances in circuits conductively connected to the mains)	-	0	nil
Cl.13.3.3 of Cl.13.3(Clearances in circuits not conductively connected to the mains)	-	0	nil
Cl.13.3.4 of Cl.13(Measurement of transient voltages)	-	0	nil
Cl.13.4 a) of Cl.13(Creepage distances )	-	0	nil
Cl.13.4 b) of Cl.13(Creepage distances )	-	0	nil
Cl.13.4 c) of Cl.13(Creepage distances )	-	0	nil
Cl.13.6 a) of Cl.13(Jointed insulation )	-	0	nil
Cl.13.7 of Cl.13(Enclosed and sealed parts)	-	0	nil
Cl.13.8 of Cl.13(Parts filled with insulating compound, meeting the requirements of 8.8)	-	0	nil
Cl.15.1 of Cl.15(Plugs and Sockets*)	-	0	nil
Cl.15.1.1 of Cl.15.1(Plugs and Sockets*)	-	0	nil
Cl.15.1.2 of Cl.15.1(Design of connectors other than for mains power *)	-	0	nil
Cl.15.1.2 i) of Cl.15.1(Design of sockets with symbol of 5.3 b) design *)	-	0	nil
Cl.15.1.3 of Cl.15.1(Design of terminals and connectors used in output circuits of supply apparatus*)	-	0	nil
Cl.15.2 of Cl.15(Provisions for protective earthing)	-	0	nil
Cl.15.3 of Cl.15(Terminals for external flexible cords and for permanent connection to the mains supply*)	-	0	nil
Cl.15.3.1 of Cl.15.3(Adequate terminals for connection of permanent wiring*)	-	0	nil
Cl.15.3.2 of Cl.15.3(Reliable connection of non-detachable cords)	-	0	nil
Cl.15.3.2 i) of Cl.15.3(Not soldered to conductors of a printed circuit board)	-	0	nil
Cl.15.3.2 ii) of Cl.15.3(Adequate clearances and creepage distances between connections should a wire break away)	-	0	nil
Cl.15.3.2 iii) of Cl.15.3(Wire secured by additional means to the conductor)	-	0	nil
Cl.15.3.3 of Cl.15.3(Screws and nuts clamping conductors have adequate threads: ISO 261, ISO 262 or similar*)	-	0	nil
Cl.15.3.4 of Cl.15.3(Conductors adequately fixed (two independent fixings) *)	-	0	nil
Cl.15.3.5 of Cl.15.3(Terminals allow connection of conductors having appropriate cross-sectional area)	-	0	nil
Cl.15.3.6 of Cl.15.3(Terminals to 15.3.3 have sizes required by table 16)	-	0	nil
Cl.15.3.7 of Cl.15.3(Terminals clamp conductors between metal and have adequate pressure)	-	0	nil
Cl.15.3.7 i) of Cl.15.3(Terminals designed to avoid conductor slipping out when tightened)	-	0	nil
Cl.15.3.7 ii) of Cl.15.3(Terminals adequately fixed when tightened or loosened (no loosening, wiring not stressed, distances not reduced))	-	0	nil
Cl.15.3.8 of Cl.15.3(Terminals carrying a current more than)	-	0	nil
Cl.15.3.8 i) of Cl.15.3(0.2 A, contact pressure not transmitted by insulating material except ceramic*)	-	0	nil
Cl.15.3.9 of Cl.15.3(Termination of non-detachable cords: wires terminated near to each other)	-	0	nil
Cl.15.3.9 i) of Cl.15.3(Terminals located and shielded: test with 8 mm strand)	-	0	nil
Cl.15.4 of Cl.15(Devices forming a part of the mains plug*)	-	0	nil
Cl.15.4.1 of Cl.15.4(No undue strain on mains socket-outlets.)	-	0	nil
Cl.15.4.2 of Cl.15.4(Device complies with standard for dimensions of mains plugs)	-	0	nil
Cl.15.4.3 of Cl.15.4(Device has adequate mechanical strength (tests a,b,c))	-	0	nil
Cl.16.1 a) of Cl.16(Mains supply flexible cords shall be sheathed type, complying with IEC 60227 for PVC cords or as per IEC 60245 for synthetic rubber cords)	-	0	nil
Cl.16.1 b) of Cl.16(Non-detachable cords for Class I have green/yellow core for protective earth)	-	0	nil
Cl.16.2 of Cl.16(Mains cords conductors shall have a nominal cross-sectional area not less than the values given in Table 18, for rated current consumption of the apparatus)	-	0	nil
Cl.16.3 a) of Cl.16(Flexiblecordsnotcomplyingwith16.1, used for interconnections between separate units of equipment used in combination and carrying hazardous live voltages, have adequate dielectric strength as perCl.10.3)	-	0	nil
Cl.16.4 of Cl.16(Flexible cords used for connection between equipment have adequate cross-sectional areas to avoid temperature rise under normal and fault conditions)	-	0	nil
Cl.16.5 a) of Cl.16(Adequate strain relief on external flexible cords)	-	0	nil
Cl.16.5 b) of Cl.16(Not possible to push cord back into equipment)	-	0	nil
Cl.16.5 c) of Cl.16(Strain relief device unlikely to damage flexible cord)	-	0	nil
Cl.16.5 d) of Cl.16(For mains cords of Class I equipment, hazardous live conductors become taut before earth conductor)	-	0	nil
Cl.16.6 of Cl.16(Apertures for external flexible cord: no risk of damage to the cord during assembly or movement in use)	-	0	nil
Cl.16.7 a) of Cl.16(Transportable apparatus fitted with detachable cord sets with appliance inlet as perIEC60320-1 or)	-	0	nil
Cl.16.7 b) of Cl.16(Transportable apparatus shall have a means of stowage to protect the cord)	-	0	nil
17.1 a) of Cl.17(Screws are loosened and then tightened with a torque according to table20)	-	0	nil
Cl.17.1 b) of Cl.17(5 times in the case of screws operating in a thread of metal)	-	0	nil
Cl.17.1 c) of Cl.17(10 times in the case of screws operating in wood or in a thread in insulating material:)	-	0	nil
Cl.17.2 of Cl.17(Correct introduction of screws into female threads in non-metallic material)	-	0	nil
Cl.17.3 a) of Cl.17(Screws or other fixing devices intended to fix Covers, legs, stands or the like, shall be captive in order to prevent replacement during servicing by screws or other fixing devices……)	-	0	nil
Cl.17.3 b) of Cl.17(Non-captive fixing screws: no hazard when replaced by a screw whose length is 10 times its diameter)	-	0	nil
Cl.17.4 of Cl.17(No loosening of conductive parts carrying a current > 0.2 A)	-	0	nil
Cl.17.5 of Cl.17(Contact pressure not transmitted through plastic other than ceramic for connections carrying a current > 0.2 A*)	-	0	nil
Cl.17.6 of Cl.17(Stranded conductors of flexible supply cords carrying a current > 0.2 A with screw terminals not consolidated by solder *)	-	0	nil
Cl.17.7 of Cl.17(Cover fixing devices other than screws have adequate strength and their positioning is unambiguous)	-	0	nil
Cl.17.8 of Cl.17(Detachable legs or stands supplied by the manufacturer of the apparatus shall be delivered with the relevant fixing means *)	-	0	nil
Cl.17.9 a) of Cl.17(Internal pluggable connections, affecting safety, unlikely to become disconnected)	-	0	nil
Cl.17.9 b) of Cl.17(By applying a 2N pull force in any direction to the connection, in case of doubt)	-	0	nil
Cl.19.1 of Cl.19(Stability and mechanical hazards)	-	0	nil
Cl.19.1 of Cl.19(Stability requirements)	-	0	nil
Cl.19.2 of Cl.19(Test at 10° to the horizontal)	-	0	nil
Cl.19.3 of Cl.19(Vertical force test )	-	0	nil
Cl.19.4 of Cl.19(Horizontal force test)	-	0	nil
Cl.19.5 of Cl.19(Test of edges and corners)	-	0	nil
Cl.19.6 of Cl.19(Mechanical strength of glass)	-	0	nil
Cl.19.6.1 of Cl.19.6(Requirements)	-	0	nil
Cl.19.6.2 of Cl.19.6(Fragmentation test)	-	0	nil
Cl.19.7 of Cl.19(Wall or ceiling mounting means)	-	0	nil
Cl.19.7.1 of Cl.19..7(Requirements)	-	0	nil
Cl.19.7.3 of Cl.19.7(Compliance)	-	0	nil
Cl.20.1 of Cl.20(Requirements)	-	0	nil
Cl.20.2 of Cl.20(Electrical components and mechanical parts)	-	0	nil
Cl.20.2.1 a) of Cl.20.2(Exemption for components contained in an enclosure of material V-0 to IEC60695- 11-10 with openings not exceeding 1 mm in width)	-	0	nil
Cl.20.2.1 b) of Cl.20.2(Exemption for small components)	-	0	nil
Cl.20.2.2 of Cl.20.2(Electrical components )	-	0	nil
Cl.20.2.3 of Cl.20.2(Internal wiring)	-	0	nil
Cl.20.2.4 of Cl.20.2(Printed boards)	-	0	nil
Cl.20.2.5 of Cl.20.2(Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4)	-	0	nil
Cl.20.3 of Cl.20(Fire enclosure*)	-	0	nil
Cl.20.3.1 of Cl.20.3(Fire enclosure*)	-	0	nil
Cl.20.3.2 of Cl.20.3(Fire enclosure*)	-	0	nil
Cl.20.3.3 of Cl.20.3(Fire enclosure*)	-	0	nil

31 Dec, 2026

-
-

8773

International Centre for Automotive Technology, Gurugram

8123735

IS 2553 : Part 1 (2018)

Safety glass - Specification: Part 1 architectural, building and general uses (Fourth Revision)

64051 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.1 (Thickness -IS 17004 & IS 14900)	-	2252	ok
5.2.2.1( Dimensions- Width )	-	2524	Total Charges for Cl. No. 5.2.2
5.2.2.1( Dimensions- Length)	-	2524	Total Charges for Cl. No. 5.2.2
5.2.2.2( Squareness)	-	2524	Total Charges for Cl. No. 5.2.2
5.2.3 (Fragmentation Test- IS 17004)	-	2660	ok
5.2.4-a( Flatness-Overall bow-IS 17004)	-	2904	Total Charge for Cl. no. 5.2.4
5.2.4-b( Flatness-Roller wave distortion-IS 17005)	-	2904	Total Charge for Cl. no. 5.2.4
5.2.4-c( Flatness-Edge lift-IS 17006)	-	2904	Total Charge for Cl. no. 5.2.4
5.2.4-d( Flatness-Local distortion-IS 17007)	-	2904	Total Charge for Cl. no. 5.2.4
5.2.4.1 (Other distortions)	-	2904	Total Charge for Cl. no. 5.2.4
5.2.5.1( Resistance to shock- IS 17004)	-	3393	ok
5.2.5.2( Resistance to human impact- IS 17004)	-	10017	ok
5.2.7( Mechanical Strength — Four Point Bending Test (Optional)- IS 17004)	-	10450	ok
5.3.1 (Thickness-IS 17004 & IS 14900)	-	3999	ok
5.3.2.1( Dimensions and squareness- Width )	-	4481	Total Charges for Cl. No. 5.3.2
5.3.2.1( Dimensions and squareness- Length)	-	4481	Total Charges for Cl. No. 5.3.2
5.3.2.1( Dimensions and squareness-Squareness)	-	4481	Total Charges for Cl. No. 5.3.2
5.3.2.2 (Edge displacement)	-	2409	ok
5.3.3( Light Stability Test-IS 17004)	-	10987	ok
5.3.3( Light Stability Test-IS 17004)	-	10987	ok
5.3.2.2 (Edge displacement)	-	2409	ok
5.3.4( Boil and Bake Tests-IS 17004)	-	3373	For Boil Test
5.3.4( Boil and Bake Tests-IS 17004)	-	2120	For Bake Test
5.3.5( Fracture and Adhesion Test-IS 17004)	-	3373	ok
5.3.6.1( Spot defects in the central area)	-	3373	Total Charges for Cl. No. 5.3.6
5.3.6.2 (Linear defects in the central area)	-	3373	Total Charges for Cl. No. 5.3.6
5.3.6.3( Defects in the outer area for framed edges)	-	3373	Total Charges for Cl. No. 5.3.6
5.3.6.4( Vents)	-	3373	Total Charges for Cl. No. 5.3.6
5.3.6.5( Creases and streaks)	-	3373	Total Charges for Cl. No. 5.3.6
5.3.6.6( Defects on edge which will not be framed)	-	3373	Total Charges for Cl. No. 5.3.6
5.3.7( Humidity Test – Optional)	-	27735	ok
5.3.8( Resistance to Human Impact Test)	-	17780	ok
5.1.1(General)	-	0	To be merged with other tests
5.1.1(General)	-	0	To be merged with other tests
5.2.6( Surface Compression (Optional)- IS 17004)	-	9851	ok
5.2.8.1 & 5.2.8.3-Table 7(Diameter of Holes & Deviations on holes )	-	0	To be merged with other tests
5.2.8.3-Table 8(Deviations on position of holes and Cutouts Location)	-	0	To be merged with other tests
Cl. No. 5.2.2.3.1, Table No. 1A(Shape accuracy, girth and length)	-	0	To be merged with other tests
Cl. No. 5.2.2.3.2(Edge straightness deviation)	-	0	To be merged with other tests
Cl. No. 5.2.2.3.3(Maximum cross-curve deviation)	-	0	To be merged with other tests

31 Dec, 2026

-
-

8774

Eurofins Consumer Product Testing India Private Limited

8187006

IS 9873 : Part 9 (2017)

Safety of Toys Part 9 Certain Phthalates Esters in Toys and Children's Products

3200 View breakup
Rs. 3200/- per color & per component

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	3200	Given prices are applicable on each color & component. This price is exclusive of taxes.
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	3200	Given prices are applicable on each color & component. This price is exclusive of taxes.
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	3200	Given prices are applicable on each color & component. This price is exclusive of taxes.
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	3200	Given prices are applicable on each color & component. This price is exclusive of taxes.
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	3200	Given prices are applicable on each color & component. This price is exclusive of taxes.
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	3200	Given prices are applicable on each color & component. This price is exclusive of taxes.
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	3200	Given prices are applicable on each color & component. This price is exclusive of taxes.
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	3200	Given prices are applicable on each color & component. This price is exclusive of taxes.

28 Jul, 2028

-
-

8775

Eurofins Consumer Product Testing India Private Limited

8187006

IS 9873 : Part 3 (2017)

Safety of toys: Part 3 migration of certain elements (Second Revision)

1500 View breakup
Rs. 1500/- per color & per component

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1 - Table 1(Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	1500	Given prices are applicable on each color & component . This prices are exclusive of taxes.
4.1 - Table 1(Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	1500	Given prices are applicable on each color & component . This prices are exclusive of taxes.
4.1 - Table 1(Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	1500	Given prices are applicable on each color & component . This prices are exclusive of taxes.
4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	1500	Given prices are applicable on each color & component . This prices are exclusive of taxes.
4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	1500	Given prices are applicable on each color & component . This prices are exclusive of taxes.
4.1 - Table 1(Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	1500	Given prices are applicable on each color & component . This prices are exclusive of taxes.
4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	1500	Given prices are applicable on each color & component . This prices are exclusive of taxes.
4.1 - Table 1(Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	1500	Given prices are applicable on each color & component . This prices are exclusive of taxes.
4.1 - Table 1(Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	1500	Given prices are applicable on each color & component . This prices are exclusive of taxes.
4.1 - Table 1(Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	1500	Given prices are applicable on each color & component . This prices are exclusive of taxes.
4.1 - Table 1(Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	1500	Given prices are applicable on each color & component . This prices are exclusive of taxes.
4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	1500	Given prices are applicable on each color & component . This prices are exclusive of taxes.
4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	1500	Given prices are applicable on each color & component . This prices are exclusive of taxes.
4.1 - Table 1(Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	1500	Given prices are applicable on each color & component . This prices are exclusive of taxes.
4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	1500	Given prices are applicable on each color & component . This prices are exclusive of taxes.
4.1 - Table 1(Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	1500	Given prices are applicable on each color & component . This prices are exclusive of taxes.

28 Jul, 2028

-
-

8776

Classic Testing & Research Centre (B17), Noida

8180826

IS 302 : Part 2 : Sec 21 (2024)

Household and Similar Electrical Appliancesï¿½Safety Part 2 Particular Requirements Section 21 Storage Water Heaters

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General requirement)	-	1000	-
5(General conditions for the tests)	-	1000	-
6(Classification)	-	1000	-
7(Marking and instructions)	-	1000	-
8(Protection against access to live parts)	-	2000	-
9(Starting of motor-operated appliances)	-	1000	-
10(Power input and current)	-	1000	-
11(Heating)	-	1000	-
13(Leakage current and electric strength at operating temperature)	-	2000	-
14(Transient overvoltages)	-	1500	-
15(Moisture resistance)	-	1000	-
16(Leakage current and electric strength)	-	1500	-
17(Overload protection of transformers and associated circuits)	-	1000	-
18(Endurance)	-	1000	-
19(Abnormal operation)	-	1500	-
20(Stability and mechanical hazards)	-	2000	-
21(Mechanical strength)	-	1500	-
22(Construction)	-	2000	-
23(Internal wiring)	-	2000	-
24(Components)	-	2000	-
25(Supply connection and external flexible cords)	-	2000	-
26(Terminals for external conductors)	-	1500	-
27(Provision for earthing)	-	1000	-
28(Screws and connections)	-	1000	-
29(Clearances, creepage distances and solid insulation)	-	1000	-
30(Resistance to heat and fire)	-	1000	-
31(Resistance to rusting)	-	1500	-
32(Radiation, toxicity and similar hazards)	-	1000	-
A.101(Pressure test)	-	1000	-
19.11.4.1(Electrostatic discharges)	-	1000	-
19.11.4.3(Fast transient bursts)	-	1500	-
19.11.4.4(Surge immunity test)	-	2000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	1000	-
19.11.4.7(Harmonics)	-	1000	-
12(Charging of metal-ion batteries)	-	1000	-

15 Oct, 2027

-
Included w.e.f.26.11.2024 Exclusion 19.11.4.2 (Radiated fields) 19.11.4.5 (Immunity to conducted discharges)

8777

Eurofins Consumer Product Testing India Private Limited

8187006

IS 9873 : Part 2 (2017)

Safety of toys: Part 2 flammability (Third Revision)

1050 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(General)	-	1050	The prices are exclusive of taxes
4.2.2-5.2(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy-Duration of the flame after the removal of the test flame)	-	1050	The prices are exclusive of taxes
4.2.2(a)-5.2(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was 150 mm or more)	-	1050	The prices are exclusive of taxes
4.2.3-5.3(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy-Duration of the flame after the removal of the test flame)	-	1050	The prices are exclusive of taxes
4.2.2(b)-5.2(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was less than 150 mm)	-	1050	The prices are exclusive of taxes
4.2.3-5.3(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy- maximum distance between the upper edge of the burnt area and the point of application of the test flame)	-	1050	The prices are exclusive of taxes
4.2.4-5.3(Toys to be worn on the head-Full or partial moulded head masks-Duration of the flame after the removal of the test flame)	-	1050	The prices are exclusive of taxes
4.2.4-5.3(Toys to be worn on the head-Full or partial moulded head masks-maximum distance between the upper edge of the burnt area and the point of application of the test flame)	-	1050	The prices are exclusive of taxes
4.2.5-5.4(Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-rate of spread of flame)	-	1050	The prices are exclusive of taxes
4.2.5-5.4(Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	1050	The prices are exclusive of taxes
4.3(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play)	-	1050	The prices are exclusive of taxes
4.3-5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-rate of spread of flame)	-	1050	The prices are exclusive of taxes
4.3-5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	1050	The prices are exclusive of taxes
4.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	1050	The prices are exclusive of taxes
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame)	-	1050	The prices are exclusive of taxes
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	1050	The prices are exclusive of taxes
4.5-5.5(Soft-filled toys-rate of spread of flame )	-	1050	The prices are exclusive of taxes
4.5-5.5(Soft-filled toys-Test for soft-filled toys )	-	1050	The prices are exclusive of taxes
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	1050	The prices are exclusive of taxes

28 Jul, 2028

-
Exclusion: Clause 4.1

8778

Classic Testing & Research Centre (B17), Noida

8180826

IS 17681 (2022)

Specification for Bottled water dispensers

220000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Construction)	-	3000	-
4.1(General Design)	-	3000	-
4.2(Materials)	-	3000	-
4.3(Finish)	-	3000	-
4.4(Thermal Insulation)	-	3000	-
4.5(Hardware)	-	3000	-
4.6(Disposal of Waste Water)	-	3000	-
4.7(Hot Water Tank)	-	3000	-
4.8(Hermetically Sealed Compressor)	-	3000	-
4.9(Protective Guards)	-	3000	-
5(Refrigeration System)	-	3000	-
5.1(Pipes and Connections/Fitting)	-	3000	-
5.2(Control of Operation)	-	5000	-
6.1(General)	-	5000	-
6.1(Protection against electric shock (Cl. 8 of IS 302-2-24))	-	10000	-
6.1(Power Input & Current (Cl. 10 of IS 302-2-24))	-	10000	-
6.1(Temperature Rise/ Heating (Cl. 11 of IS 302-2-24))	-	10000	-
6.1("Insulation Resistance and Electric Strength/ Leakage Current and Electric Strength (Cl. 13 of IS 302-2-24)")	-	10000	-
6.1("Moisture Resistance (Cl. 15 of IS 302-2-24)")	-	10000	-
6.1("Insulation resistance and electric strength (After humidity treatment) (Cl. 16 of IS 302-2-24)")	-	10000	-
6.1("Provision For Earthing (Cl. 27 of IS 302-2-24)")	-	10000	-
6.1("Screws & Connections (Cl. 28 of IS 302-2-24)")	-	1000	-
6.2(Electrical Accessories)	-	1000	-
6.3(Salt Mist Test)	-	10000	-
7(Sound pressure level)	-	10000	-
10.1(Cooling Capacity Test)	-	5000	-
10.2(Maximum Operating Condition Test (Environmental))	-	5000	-
10.3(Maximum Operating Condition Test (Voltage))	-	5000	-
10.4(Heating Capacity Test)	-	5000	-
10.5(Annual Energy Consumption Test)	-	5000	-
10.6(Freeze-up Test)	-	5000	-
10.7(Door Opening and Closing Test)	-	5000	-
10.8(Door Seal Test)	-	5000	-
10.9(Pull-down Test)	-	5000	-
11(Marking and instruction)	-	5000	-

15 Oct, 2027

-
Included w.e.f.23.07.2025

8779

Intertek India Private Limited, New Delhi (E-20)

8122426

IS 302 : Part 2 : Sec 7 (2024)

Safety of Household And Similar Electrical Appliances Part 2 Particular Requirements Section 7: Domestic Electric Clothes Washing Machines

110000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(MARKING AND INSTRUCTIONS)	-	1000	-
8(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	2000	-
10(POWER INPUT AND CURRENT)	-	8000	-
11(HEATING)	-	12000	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	7000	-
14(TRANSIENT OVERVOLTAGES)	-	6000	-
15(MOISTURE RESISTANCE)	-	10000	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	6000	-
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	3000	-
18(ENDURANCE)	-	11000	-
19(ABNORMAL OPERATION)	-	10000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	1000	-
21(MECHANICAL STRENGTH)	-	2500	-
22(CONSTRUCTION)	-	5500	-
23(INTERNAL WIRING)	-	1000	-
24(COMPONENTS)	-	1000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	2000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	1000	-
27(PROVISION FOR EARTHING)	-	2000	-
28(SCREWS AND CONNECTIONS)	-	1000	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	3000	-
30(RESISTANCE TO HEAT AND FIRE)	-	4000	-
31(RESISTANCE TO RUSTING)	-	10000	-
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	0	Clause Repeated.
4(GENERAL REQUIREMENT)	-	0	-
6(CLASSIFICATION)	-	0	-
19.13(ABNORMAL OPERATION)	-	0	For testing charges refer Clause no. 19
19.101(Abnormal Operation)	-	0	For testing charges refer Clause no. 19
19.102(Abnormal Operation)	-	0	For testing charges refer Clause no. 19
7(MARKING AND INSTRUCTIONS)	-	-	-
8(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	-	-
10(POWER INPUT AND CURRENT)	-	-	-
11(HEATING)	-	-	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	-	-
14(TRANSIENT OVERVOLTAGES)	-	-	-
15(MOISTURE RESISTANCE)	-	-	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	-	-
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	-	-
18(ENDURANCE)	-	-	-
19(ABNORMAL OPERATION)	-	-	-
20(STABILITY AND MECHANICAL HAZARDS)	-	-	-
21(MECHANICAL STRENGTH)	-	-	-
22(CONSTRUCTION)	-	-	-
23(INTERNAL WIRING)	-	-	-
24(COMPONENTS)	-	-	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	-	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	-	-
27(PROVISION FOR EARTHING)	-	-	-
28(SCREWS AND CONNECTIONS)	-	-	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	-	-
30(RESISTANCE TO HEAT AND FIRE)	-	-	-
31(RESISTANCE TO RUSTING)	-	-	-
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	-	-
4(GENERAL REQUIREMENT)	-	-	-
6(CLASSIFICATION)	-	-	-
19.13(ABNORMAL OPERATION)	-	-	-
19.101(Abnormal Operation)	-	-	-
19.102(Abnormal Operation)	-	-	-

27 Oct, 2028

-
Included.w.e.f.10.01.2025 exclusion Cl 19.11.4.1 (Electrostatic discharges) Cl 19.11.4.2 (Radiated fields) Cl 19.11.4.3 (Fast transient bursts) Cl 19.11.4.4 (Surge immunity test) Cl 19.11.4.5 (Immunity to conducted discharges) Cl 19.11.4.6 (Class 3 Voltage dips and interruptions) Cl 19.11.4.7 (Harmonics) Cl 32 (RADIATION, TOXICITY AND SIMILAR HAZARDS)

8780

MSME TESTING CENTER, AHMEDABAD

7186204

IS 1848 : Part 1 (2018)

Writing and printing papers - Specification: Part 1 account book, azure lead, bond, cream laid and cream wove/printing white/printing coloured/printing offset, printing maplitho, printing white super calendered and typewriting types (Fifth Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4.2(Substance, Ref IS 1763)	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.4(Size and tolerance on size)	-	575	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.5(pH)	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Tensile index, Account book-CD)	-	2000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Tensile index, Account book-MD)	-	2000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Brightness ISO, Account book)	-	775	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Opacity, Account book)	-	2000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(One minute cobb test, Account book)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Double fold, Account book-CD)	-	675	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Double fold, Account book-MD)	-	675	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Gloss, Account book)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Wax pick, Account book)	-	1150	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Smoothness(Bendtsen),Account book)	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Tear index, Account book-CD)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Tear index, Account book-MD)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Tensile index, Azure laid-CD)	-	2000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Tensile index, Azure laid-MD)	-	2000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Brightness ISO, Azure laid)	-	775	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Opacity,Azure laid)	-	2000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(One minute cobb test, Azure laid)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Double fold, Azure laid-CD)	-	675	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Double fold, Azure laid-MD)	-	675	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Gloss, Azure laid)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Wax pick, Azure laid)	-	1150	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Smoothness(Bendtsen),Azure laid)	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Tear index, Azure laid-CD)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Tear index, Azure laid-MD)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Tensile index, Bond-CD)	-	2000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Tensile index, Bond-MD)	-	2000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Brightness ISO, Bond)	-	775	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Opacity, Bond)	-	2000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(One minute cobb test, Bond)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Double fold, Bond-CD)	-	675	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Double fold, Bond-MD)	-	675	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Gloss, Bond)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Wax pick, Bond)	-	1150	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Smoothness(Bendtsen),Bond)	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Tear index, Bond-CD)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Tear index, Bond-MD)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Tensile index, Cream laid and cream wove/printing white/printing coloured/printing offset-CD)	-	2000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Tensile index, Cream laid and cream wove/printing white/printing coloured/printing offset-MD)	-	2000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Brightness ISO, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	775	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Opacity, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	2000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(One minute cobb test, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Double fold, Cream laid and cream wove/printing white/printing coloured/printing offset-CD)	-	675	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Double fold, Cream laid and cream wove/printing white/printing coloured/printing offset-MD)	-	675	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Gloss, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Table-1(ix)(Tear index, CD)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Wax pick, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Table-1(viii)(Smoothness (Bendtsen))	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Smoothness bendtsen, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Tear index, Cream laid and cream wove/printing white/printing coloured/printing offset-CD)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Table-1(vii)(Wax pick)	-	1150	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Tear index, Cream laid and cream wove/printing white/printing coloured/printing offset-MD)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Tensile index, Printing Maplitho-CD)	-	2000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Tensile index, Printing Maplitho-MD)	-	2000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Brightness ISO, Printing Maplitho)	-	775	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Opacity, Printing Maplitho)	-	2000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(One minute cobb test, Printing Maplitho)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Double fold, Printing Maplitho-CD)	-	675	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Double fold, Printing Maplitho-MD)	-	675	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Gloss, Printing Maplitho)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Wax pick, Printing Maplitho)	-	1150	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Smoothness bendtsen, Printing Maplitho)	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Tear index, Printing Maplitho-CD)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Tear index, Printing Maplitho-MD)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tensile index, Printing White Super Calendered-CD)	-	2000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tensile index, Printing White Super Calendered-MD)	-	2000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Brightness ISO, Printing White Super Calendered)	-	775	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Opacity, Printing White Super Calendered)	-	2000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(One minute cobb test, Printing White Super Calendered)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Double fold, Printing White Super Calendered-CD)	-	675	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Double fold, Printing White Super Calendered-MD)	-	675	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Gloss, Printing White Super Calendered)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Wax pick, Printing White Super Calendered)	-	1150	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Smoothness bendtsen, Printing White Super Calendered)	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tear index, Printing White Super Calendered-CD)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tensile index, Typewriting-CD)	-	2000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Tensile index, Typewriting-MD)	-	2000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Brightness ISO, Typewriting)	-	775	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Opacity, Typewriting)	-	2000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(One minute cobb test, Typewriting)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Double fold, Typewriting-CD)	-	675	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Double fold, Typewriting-MD)	-	675	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Gloss, Typewriting)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Wax pick, Typewriting)	-	1150	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Smoothness bendtsen, Typewriting)	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Tear index, Typewriting-CD)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Tear index, Typewriting-MD)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl.4.2(Substance, Ref IS 1763)	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.4(Size and tolerance on size)	-	575	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.5(pH)	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Tensile index, Account book-CD)	-	2000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Tensile index, Account book-MD)	-	2000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Brightness ISO, Account book)	-	775	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Opacity, Account book)	-	2000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(One minute cobb test, Account book)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Double fold, Account book-CD)	-	675	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Double fold, Account book-MD)	-	675	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Gloss, Account book)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Wax pick, Account book)	-	1150	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Smoothness(Bendtsen),Account book)	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Tear index, Account book-CD)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Tear index, Account book-MD)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Tensile index, Azure laid-CD)	-	2000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Tensile index, Azure laid-MD)	-	2000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Brightness ISO, Azure laid)	-	775	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Opacity,Azure laid)	-	2000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(One minute cobb test, Azure laid)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Double fold, Azure laid-CD)	-	675	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Double fold, Azure laid-MD)	-	675	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Gloss, Azure laid)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Wax pick, Azure laid)	-	1150	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Smoothness(Bendtsen),Azure laid)	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Tear index, Azure laid-CD)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Tear index, Azure laid-MD)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Tensile index, Bond-CD)	-	2000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Tensile index, Bond-MD)	-	2000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Brightness ISO, Bond)	-	775	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Opacity, Bond)	-	2000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(One minute cobb test, Bond)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Double fold, Bond-CD)	-	675	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Double fold, Bond-MD)	-	675	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Gloss, Bond)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Wax pick, Bond)	-	1150	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Smoothness(Bendtsen),Bond)	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Tear index, Bond-CD)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Tear index, Bond-MD)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Tensile index, Cream laid and cream wove/printing white/printing coloured/printing offset-CD)	-	2000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Tensile index, Cream laid and cream wove/printing white/printing coloured/printing offset-MD)	-	2000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Brightness ISO, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	775	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Opacity, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	2000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(One minute cobb test, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Double fold, Cream laid and cream wove/printing white/printing coloured/printing offset-CD)	-	675	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Double fold, Cream laid and cream wove/printing white/printing coloured/printing offset-MD)	-	675	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Gloss, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Wax pick, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	1150	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Smoothness bendtsen, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Tear index, Cream laid and cream wove/printing white/printing coloured/printing offset-CD)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Tear index, Cream laid and cream wove/printing white/printing coloured/printing offset-MD)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Tensile index, Printing Maplitho-CD)	-	2000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Tensile index, Printing Maplitho-MD)	-	2000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Brightness ISO, Printing Maplitho)	-	775	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Opacity, Printing Maplitho)	-	2000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(One minute cobb test, Printing Maplitho)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Double fold, Printing Maplitho-CD)	-	675	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Double fold, Printing Maplitho-MD)	-	675	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Gloss, Printing Maplitho)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Wax pick, Printing Maplitho)	-	1150	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Smoothness bendtsen, Printing Maplitho)	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Tear index, Printing Maplitho-CD)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Tear index, Printing Maplitho-MD)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tensile index, Printing White Super Calendered-CD)	-	2000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tensile index, Printing White Super Calendered-MD)	-	2000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Brightness ISO, Printing White Super Calendered)	-	775	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Opacity, Printing White Super Calendered)	-	2000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(One minute cobb test, Printing White Super Calendered)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Double fold, Printing White Super Calendered-CD)	-	675	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Double fold, Printing White Super Calendered-MD)	-	675	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Gloss, Printing White Super Calendered)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Wax pick, Printing White Super Calendered)	-	1150	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Smoothness bendtsen, Printing White Super Calendered)	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tear index, Printing White Super Calendered-CD)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tear index, Printing White Super Calendered-MD)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tensile index, Typewriting-CD)	-	2000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Tensile index, Typewriting-MD)	-	2000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Brightness ISO, Typewriting)	-	775	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Opacity, Typewriting)	-	2000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(One minute cobb test, Typewriting)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Double fold, Typewriting-CD)	-	675	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Double fold, Typewriting-MD)	-	675	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Gloss, Typewriting)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Wax pick, Typewriting)	-	1150	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Smoothness bendtsen, Typewriting)	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Tear index, Typewriting-CD)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Tear index, Typewriting-MD)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl.4.1(Description)	-	600	Above is general charges are for visual test. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl.4.2(Substance)	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl.4.2.1(Tolerances on nominal substance)	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl.4.3(Thickness)	-	525	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl.4.4(Sizes and tolerances on sizes)	-	575	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tear index, Printing White Super Calendered-MD)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl.4.5(pH)	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Table-1(i)(Tensile index, CD)	-	2000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Table-1(ii)(Brightness, ISO)	-	775	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Table-1(i)(Tensile index, MD)	-	2000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Table-1(iii)(Opacity)	-	2000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Table-1(iv)(One minute cobb test)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Table-1(v)(No of double fold, CD)	-	675	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Table-1(v)(No of double fold, MD)	-	675	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Table-1(vi)(Gloss)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Table-1(ix)(Tear index, MD)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl.4.1(Mechanical pulp)	-	-	-

16 Jun, 2028

-
-

8781

BIS, Eastern Regional Laboratory (ERL)

None

IS 17753 (2021)

Paperbased Multilayer Laminated/Extruded Composite Cartons (Aseptic and Non-Aseptic) for Processed Liquid Food Products and Beverages Specification

Please See Remerk View breakup
Total testing charge of the product (Mechanical + Chemical+ Microbiology): Rs. 7,500 + Microbiological Tests (Based on shelf life and testing method as mentioned below) For Shelf Life = 12 months, Standard Conditions, n = 12 months: Rs. 39,680/- For Shelf Life = 12 months, Accelerated Conditions, n = 4 months: Rs. 17,630/- For Shelf Life = 9 months, Standard Conditions, n = 9 months: Rs. 31,130/- For Shelf Life = 9 months, Accelerated Conditions, n = 3 months: Rs. 14,930/- For Shelf Life = 6 months, Standard Conditions, n = 6 months: Rs. 23,030/- For Shelf Life = 6 months, Accelerated Conditions, n = 2 months: Rs. 12,230/- For Shelf Life = 3 months, Standard Conditions, n = 3 months: Rs.14,930/- For Shelf Life = 3 months, Accelerated Conditions, n = 1 months: Rs.9530/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.2.1 (Over-all Migration)	-
5.2.2 (Specific Migration Test)	-
5.1.1 (Description)	-
5.2.7 (Ink Adhesion Test)	-
5.2.6 (Print Resistance Test)	-
4.3 (Capacity)	-
4.1 Table 1 (i) (Grammage of paperboard, g/m2 , Max)	-
4.1 Table 1 (ii) (Thickness of aluminium foil, microns, Max)	-
4.1 Table 1 (iii) (Thickness of polyethylene, microns, Max)	-
5.2.3 (Vibration Leakage Test)	-
Cl..5.2.1 (Overall migration, mg/dm2, Max- IS 9845:1988)	-
Cl..5.2.1 (Colour migration- IS 9845:1988)	-
Cl..5.2.2- Tabl 2- S.No-viii ("Specific migration, Phthalic acid, (2-ethylhexyl) ester (DEHP), mg/kg, Max- IS 9873(Part 6):2021")	-
Cl..5.2.2- Tabl 2- S.No-viii (Specific migration, Antimony, mg/kg, Max- IS 3025 (Part 65) : 2025)	-
Cl..5.2.2- Tabl 2- S.No-vii (Specific migration, Zinc, mg/kg, Max- IS 3025 (Part 65) : 2025)	-
Cl..5.2.2- Tabl 2- S.No-vi (Specific migration, Manganese, mg/kg, Max- IS 3025 (Part 65) : 2025)	-
Cl..5.2.2- Tabl 2- S.No-v (Specific migration, Lithium, mg/kg, Max- IS 3025 (Part 65) : 2025)	-
Cl..5.2.2- Tabl 2- S.No-iv (Specific migration, Iron, mg/kg, Max- IS 3025 (Part 65) : 2025)	-
Cl..5.2.2- Tabl 2- S.No-iii (Specific migration, Copper, mg/kg, Max- IS 3025 (Part 65) : 2025)	-
Cl..5.2.2- Tabl 2- S.No-ii (Specific migration, Cobalt, mg/kg, Max- IS 3025 (Part 65) : 2025)	-
Cl..5.2.2- Tabl 2- S.No-i (Specific migration, Barium, mg/kg, Max- IS 3025 (Part 65) : 2025)	-
5.2.4.2 (Shelf-life test)	-
5.2.4.3 (Total bacterial count, CFU/g, max)	-
5.2.4.3 (Total spore count,CFU/g, max)	-
5.2.4.3 (Yeast and mould, CFU/100cm2, max)	-
5.2.4.4 (Visual observation)	-
5.2.4.5 (a) (" The sheet/carton meets the requirements for microbiological parameters at the end of declared shelf-life or at the end of accelerated condition period ")	-
5.2.4.5 (b) (There is no delamination and no deformation into the sheet/carton at the end of declared shelf-life or atthe end of accelerated condition period.)	-

-
Excluding Cl 4.1-4.1.4 (material & Construction), cl 5.2.5 [Water Vapour Transmission Rate (WVTR) and Oxygen Transmission Rate (OTR)]

8782

Standard Testing and Compliance Private Limited

6178726

IS 10322 : PART 5 : SEC 3 (2012)

Luminaires: Part 5 particular requirements: Sec 3 luminaires for road and street lighting (First Revision)

Street Light

55000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	0	15% discount to BIS
5(Classification of Luminaires')	-	0	15% discount to BIS
6.0(Marking)	-	2000	15% discount to BIS
7.0(Construction)	-	5000	15% discount to BIS
8.0(Creepage Distance and Clearances)	-	1000	15% discount to BIS
9.0(Provision for earthing)	-	1000	15% discount to BIS
10.0(Terminals)	-	1000	15% discount to BIS
11.0(External & Internal Wiring)	-	2000	15% discount to BIS
12.0(Protection against electric shock)	-	3000	15% discount to BIS
13.0(Endurance Tests and Thermal Tests)	-	12000	15% discount to BIS
14.0(Resistance to Dust & Moisture)	-	5000	15% discount to BIS
15.0(Insulation Resistance and Electric Strength)	-	3000	15% discount to BIS
16.0(Resistance to Heat , fire and tracking)	-	5000	15% discount to BIS
17.0(Photometric Test)	-	15000	15% discount to BIS

10 Jul, 2027

-
Included.w.e.f.06.12.2024

8783

Sleen India Biz venture Private Limited, Agra

9139736

IS 13893 (1994)

Polyurethane soles semirigid - specification

5500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Design)	-	150	EXCLUDING 18 % GST
4.2 (Amendment 2)(Thickness)	-	150	-
4.3.1 Table 1 i) (Amendment 2)(Relative Density)	-	300	-
4.3.1 Table 1 iii) (Amendment 2)(Abrasion Resistance at applied force of 10 N)	-	600	-
4.3.1 Table 1 iv) (Amendment 2)(Flexing Resistance, Bennewart method)	-	600	-
4.3.1 Table 1 v) (Amendment 2)(Hydrolysis Resistance, cut growth after 150000 flexes)	-	2000	-
4.3.1 Table 1 vi) (Amendment 2)(Tensile Strength)	-	500	-
4.3.1 Table 1 vii) (Amendment 2)(Elongation at break)	-	200	-
4.3.1 Table 1 viii) (Amendment 2)(Tear Strength (average force))	-	500	-
4.3.1 Table 1 ii) (Amendment 2)(Hardness, degree, Shore A)	-	500	-

-
Amendment No. 2 included w.e.f. 09.11.2024

8784

BIS, Hyderabad Branch Laboratory (HYBL)

None

IS 16208 (2015)

Textiles - High density polyethylene (HDPE)/polypropylene (PP) woven sacks for packaging 10 kg, 15 kg, 20 kg, 25 kg and 30 kg foodgrains - Specification

19750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 (TYPES)	-
4.1 (Raw Material)	-
4.2 (Tapes – Width IS 6192 and IS 11197)	-
4.2 (Tapes – Linear Density )	-
4.2 (Construction)	-
4.3 (Sacks)	-
4.3.1 (Bottom Seam)	-
4.3.1 ( The two rows of stitches shall be separated from each other)	-
4.3.1 ( The stitching shall be done with double fold over seam to a depth )	-
4.3.1 (Stitches pass through a minimum of six layers of the fabric. )	-
4.3.1 (The number of stitches/dm)	-
4.3.2 (Mouth)	-
4.4 and Table 1 i (Capacity)	-
5.2 and Table 1 ii a (Dimensions Inside Length)	-
5.2 and Table 1 ii b (Dimensions Inside Width)	-
5.2 and Table 1 iii (Ends per dm )	-
5.2 and Table 1 iv (Picks per dm )	-
5.1 and Table 1 v (Mass of sack )	-
5.2 and Table 1 vi a (Average breaking strength of fabric Lengthwise )	-
5.2 and Table 1 vi b (Average breaking strength of fabric Widthwise )	-
5.2 and Table 1 vi (Breaking strength of bottom seam )	-
5.2 and Table 1 viii a (Elongation at break of fabric Lengthwise)	-
5.2 and Table 1 viii b (Elongation at break of fabric Widthwise )	-
5.2 and Table 1 ix (Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-
5.2 and Table 1 x (Ash content )	-

-
Complete test facility

8785

Standard Testing and Compliance Private Limited

6178726

IS 10322 : Part 5 : Sec 2 (2012)

Luminaires: Part 5 particular requirements: Sec 2 recessed luminaires (First Revision)

Recessed Light

55000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	0	15% discount to BIS
5(Classification of Luminaires')	-	0	15% discount to BIS
6(Marking)	-	2000	15% discount to BIS
7(Construction)	-	5000	15% discount to BIS
8(Creepage Distance and Clearances)	-	1000	15% discount to BIS
9(Provision for earthing)	-	1000	15% discount to BIS
10(Terminals)	-	1000	15% discount to BIS
11(External & Internal Wiring)	-	2000	15% discount to BIS
12(Protection against electric shock)	-	3000	15% discount to BIS
13(Endurance Tests and Thermal Tests)	-	12000	15% discount to BIS
14(Resistance to Dust and Moisture)	-	5000	15% discount to BIS
15(Insulation Resistance and Electric Strength)	-	3000	15% discount to BIS
16(Resistance to Heat , fire and tracking)	-	5000	15% discount to BIS
17(Photometric Test)	-	15000	15% discount to BIS

10 Jul, 2027

-
Included.w.e.f.06.12.2024

8786

BIS, Hyderabad Branch Laboratory (HYBL)

None

IS 16703 (2017)

Textiles - High density polyethylene (HDPE) polypropylene (PP) woven sacks for packaging of 25 kg polymer materials - Specification

14450 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (Mass of Bale)	-
5.2 Table 1 (Dimensions)	-
5.2 Table 1 (Dimensions)	-
5.2 Table 1 (Dimensions)	-
5.2 Table 1 (Dimensions)	-
5.2 Table 1 (Ends per dm)	-
5.2 Table 1 (Picks per dm)	-
5.2 Table 1 (Mass of sack, Gusseted type, g - IS 1964)	-
5.2 Table 1 (Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N) (kgf): - IS 1969 (Part 1))	-
5.2 Table 1 (Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N2) (kgf): - IS 1969 (Part 1))	-
5.2 Table 1 (Breaking strength of bottom seam (Ravelled strip method), Min, N) (kgf) - IS 9030)	-
5.2 Table 1 (Elongation at break of fabric (Ravelled strip method), percent : IS 1969 (Part 1))	-
5.2 Table 1 (Elongation at break of fabric (Ravelled strip method), percent : IS 1969 (Part 1))	-
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,a) For UV stabilized sacks)	-
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,b) For non- UV stabilized sacks)	-
4.6 (Capacity)	-
4.3.1 (Bottom Seam)	-
4.3 (Sacks)	-
4.2,5.1,5.2,5.3,5.4 (Breaking strenght after U.V. Exposure (Warp/Weft))	-
4.2,5.1,5.2,5.3,5.4, (UV Resistance (192 hrs)(100 x 65+92x40))	-
4.2 (Linear Density)	-
4.2 (Width of tape)	-

-
Complete test facility

8787

GUJARAT TEST HOUSE, AHMEDABAD

7109836

IS 2202 : Part 1 (2023)

WOODEN FLUSH DOOR SHUTTERS SOLID CORE TYPE SPECIFICATION PART 1 PLYWOOD FACE PANELS Seventh Revision

BWP,MR

8450 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.1(Workmanship & Finish)	-	0	-
9.2(Workmanship & Finish)	-	0	-
9.3(Workmanship & Finish)	-	0	-
11.1(Dimensions - Height)	-	100	-
11.1(Dimensions - Width)	-	100	-
11.1(Dimensions - Thickness)	-	100	-
11.1(Dimensions - Variation in thickness)	-	0	-
11.1(Dimensions - Squareness)	-	150	-
11.12(End immersion test)	-	200	-
11.13(Knife Test)	-	0	-
11.14(Glue Adhesion Test)	-	200	-
4(GRADE)	-	0	-
4(TYPE)	-	0	-
5(SIZES)	-	0	-
7.1.1(CONSTRUCTION-Blockboard Core)	-	0	-
7.1.1(CONSTRUCTION-Blockboard Core)	-	0	-
7.1.2(CONSTRUCTION-Blockboard Core)	-	0	-
7.3.2(CONSTRUCTION-Stiles and Rails)	-	0	-
7.3.2(a)(CONSTRUCTION-Stiles and Rails-Joints)	-	0	-
7.3.2(b)(CONSTRUCTION-Stiles and Rails-Joints)	-	0	-
7.3.2(c)(CONSTRUCTION-Stiles and Rails-Joints)	-	0	-
7.3.3(CONSTRUCTION-Stiles and Rails)	-	0	-
9.1(WORKMANSHIP AND FINISH)	-	0	-
9.2(WORKMANSHIP AND FINISH)	-	0	-
9.3(WORKMANSHIP AND FINISH)	-	0	-
11.1(Dimensions and Squareness Test)	-	0	-
11.1(Dimensions and Squareness Test)	-	0	-
11.1(Dimensions and Squareness Test)	-	0	-
11.1(Dimensions and Squareness Test)	-	0	-
11.1(Dimensions and Squareness Test)	-	0	-
11.2(General Flatness Test)	-	200	-
11.2(General Flatness Test)	-	0	-
11.2(General Flatness Test)	-	0	-
11.3(Local Planeness Test)	-	200	-
11.4(Impact Indentation Test)	-	200	-
11.4(Impact Indentation Test)	-	0	-
11.5(Flexure Test)	-	200	-
11.5(Flexure Test)	-	0	-
11.6(Edge Loading Test)	-	200	-
11.6(Edge Loading Test)	-	0	-
11.6(Edge Loading Test)	-	0	-
11.6(Edge Loading Test)	-	0	-
11.7.1(Shock Resistance Test)	-	200	-
11.7.2(Shock Resistance Test)	-	0	-
11.8(Buckling Test)	-	200	-
11.8(Buckling Test)	-	0	-
11.8(Buckling Test)	-	0	-
11.9.2(Slamming Test)	-	0	-
11.9.3(Slamming Test)	-	0	-
11.10(Misuse Test)	-	200	-
11.11(Varying Humidity Test)	-	5000	-
11.11(Varying Humidity Test)	-	0	-
11.12(End Immersion Test)	-	200	-
11.13(Knife Test)	-	0	-
11.14(Glue Adhesion Test)	-	200	-
11.15(Screw Withdrawal Resistance Test)	-	1000	-
11.15(Screw Withdrawal Resistance Test)	-	0	-
Clause 4.2(grades specified)	-	0	-
Clause 5(SIZES)	-	0	-
Clause 6.1.1(species of timber)	-	0	-
Clause 6.1.2(list of species)	-	0	-
Clause 6.1.3(moisture content)	-	0	-
Clause 6.2.1(Plywood)	-	0	-
Clause 6.2.2(Decorative plywood)	-	0	-
Clause 6.3(Cross-Bands)	-	0	-
Clause 6.4.1(Commercial Face Veneers)	-	0	-
Clause 6.4.2(Decorative Face Veneers)	-	0	-
Clause 6.6.1(Adhesives)	-	0	-
Clause 6.7(Particle Board)	-	0	-
Clause 6.8(Medium density fibre board)	-	0	-
Clause 6.9(Alternative Materials)	-	0	-
Clause 7.1(Blockboard Core)	-	0	-
Clause 7.2(Particle Board or Medium Density Fibre)	-	0	-
Clause 7.3(Stiles and Rails)	-	0	-
Clause 7.4(Levelling)	-	0	-
Clause 7.5(Face Panel)	-	0	-
Clause 7.6(Lipping)	-	0	-
Clause 7.7(Rebating)	-	0	-
Clause 7.8(Opening for Glazing)	-	0	-
Clause 7.9(Venetian)	-	0	-
Clause 8.1(Locks)	-	0	-
Clause 9(WORKMANSHIP AND FINISH)	-	0	-
Clause 10.1(Classification of Tests)	-	0	-
Clause 11.1(Dimensions and Squareness Test)	-	0	-
Clause 11.2(General Flatness Test)	-	0	-
Clause 11.3(Local Planeness Test)	-	0	-
Clause 11.4(Impact Indentation Test)	-	0	-
Clause 11.5(Flexure Test)	-	0	-
Clause 11.6(Edge Loading Test)	-	0	-
Clause 11.7(Shock Resistance Test)	-	0	-
Clause 11.8(Buckling Resistance Test)	-	0	-
Clause 11.9(Slamming Test)	-	0	-
Clause 11.10(Misuse Test)	-	0	-
Clause 11.11(Varying Humidity Test)	-	0	-
Clause 11.12(End Immersion Test)	-	0	-
Clause 11.13(Knife Test)	-	0	-
Clause 11.14(Glue Adhesion Test)	-	0	-
Clause 11.15(Screw Withdrawal Resistance Test)	-	0	-
Clause 12(SAMPLING AND CRITERIA FOR CONFORMITY)	-	0	-
Clause 13(ADDITIONAL REQUIREMENTS FOR ECO MARK)	-	0	-
Clause 14(Marking)	-	0	-
4(Grade, Type and Construction)	-	0	-
5(Sizes and Thickness)	-	0	-
6.1(Timber)	-	0	-
6.2(Plywood for flush door shutter)	-	0	-
6.3(Cross-Bands )	-	0	-
6.4.1(Commercial Face Veneers)	-	0	-
6.4.2(Decorative face veneers)	-	0	-
6.6(Adhesives)	-	0	-
6.7(Particle Board)	-	0	-
6.8(Medium Density Fibre)	-	0	-
6.9(Alternative Materials)	-	0	-
7(Construction)	-	0	-
8.1(Locks)	-	0	-
8.2(Other Fittings)	-	0	-
9(Workmanship and Finish)	-	0	-
10(Tests)	-	0	-
11.1(Dimensions and Squareness Test)	-	0	-
11.2(General Flatness Test)	-	0	-
11.3(Local Planeness Test)	-	0	-
11.4(Impact Indentation Test)	-	0	-
11.5(Flexure Test)	-	0	-
11.6(Edge Loading Test)	-	0	-
11.7(Shock Resistance Test)	-	0	-
11.8(Buckling Resistance Test)	-	0	-
11.9(Slamming Test)	-	0	-
11.1(Misuse Test)	-	0	-
11.11(Varying Humidity Test)	-	0	-
11.12(End Immersion Test)	-	0	-
11.13(Knife Test)	-	0	-
11.14(Glue Adhesion Test)	-	0	-
11.15(Screw Withdrawal Resistance Test)	-	0	-
14(Marking )	-	0	-
Cl-13(ADDITIONAL REQUIREMENTS FOR ECO MARK)	-	0	-

15 Jul, 2027

-
Included w.e.f.12.03.2025

8788

GUJARAT TEST HOUSE, AHMEDABAD

7109836

IS 17541 (2021)

Modular panel for security of premises specification

C,B,A,AA,AAA

370000 View breakup
Remarks: Class C Rs.1,85,000/-, Class B Rs. 2,35,000/-, Class A Rs. 265,000/-, Class AA Rs. 3,40,000/-, Class AAA Rs.3,70,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause-5(Dimensions)	-	50000	Testing charges maximum Rs.3,70,000/- Class AAA. (Class C Rs.1,85,000/- , Class B Rs. 2,35,000/-, Class A Rs. 265,000/- , Class AA Rs. 3,40,000/-)
Clause-6(Materials)	-	0	-
Clause-8(Construction and General Requirements)	-	0	-
Clause-9(Fittings)	-	0	-
Clause-10(Finish)	-	5000	-
Clause-10.1(Cross Hatch Test)	-	5000	-
Clause-11.2, 1(Full length panel (Continuous design panel))	-	1395000	Class Rs. (For Burglary attacks test) C 185000 B 235000 A 265000 AA 340000 AAA 370000
Clause-11.2, 2(Assemble panel/Segmented panel)	-	0	As above (for burlglary attacks test) Class Rs. C 185000 B 235000 A 265000 AA 340000 AAA 370000
Clause-12(Marking)	-	0	-
Clause-5(Dimensions)	-	0	-
Clause-6(Materials)	-	0	-
Clause-8(Construction and General Requirements)	-	0	-
Clause-9(Fittings)	-	0	-
Clause-10(Finish)	-	0	-
Clause-10.1(Cross Hatch Test)	-	0	-
Clause-11.2, 1(Full length panel (Continuous design panel))	-	0	-
Clause-11.2, 2(Assemble panel/Segmented panel)	-	0	-
Clause-12(Marking)	-	0	-
Clause-5(Dimensions)	-	0	-
Clause-6(Materials)	-	0	-
Clause-8(Construction and General Requirements)	-	0	-
Clause-9(Fittings)	-	0	-
Clause-10(Finish)	-	0	-
Clause-10.1(Cross Hatch Test)	-	0	-
Clause-11.2, 1(Full length panel (Continuous design panel))	-	0	-
Clause-11.2, 2(Assemble panel/Segmented panel)	-	0	-
Clause-12(Marking)	-	0	-

15 Jul, 2027

-
Included w.e.f 05.03.2025

8789

Classic Testing & Research Centre (B17), Noida

8180826

IS 16046 : Part 1 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 1 Nickel Systems ( Second Revision )

48000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	2000	-
5(General Safety Considerations)	-	2000	-
5.1(General)	-	1000	-
5.2(Insulation and Wiring)	-	2000	-
5.3(Venting)	-	2000	-
5.4(Temperature, Voltage and Current Management)	-	2000	-
5.5(Terminal Contacts)	-	1000	-
5.6(Assembly of Cells into batteries)	-	3000	-
5.7(Quality Plan)	-	1000	-
6(Tyoe Test amd Sample Size)	-	1000	-
7(Specific requirements and tests)	-	1000	-
7.1(Charging procedure for test purposes)	-	1000	-
7.2(Intended Use)	-	1000	-
7.3(Reasonably foreseeable misuse)	-	1000	-
8(Information for safety)	-	1000	-
8.1(General)	-	1000	-
8.2(Small Cell and battery safety information)	-	1000	-
9(Marking)	-	2000	-
9.1(Cell Marking)	-	1000	-
9.2(Battery Marking)	-	1000	-
9.3(Caution for ingestion of small cells and batteries)	-	1000	-
9.4(Other information)	-	1000	-
10(Packaging)	-	1000	-

15 Oct, 2027

-
Included w.e.f.14.11.2024

8790

TUV INDIA PVT LTD, PEENYA, BENGALURU

6169526

IS 16270 (2023)

Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test

1950000 View breakup
For Ni-Cd/Ni-MH/Li-System up to 250 Ah Rs.1350000/ For vented type cell / Battery Rs. 1300000/ For Lead acid cell/ Battery Rs.1950000/ (Range >250Ah to 400Ah)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Photovoltaic Energy System)	-	5000	-
Cl-4.2(Secondary Cells and Batteries)	-	5000	-
Cl-4.3(General Operating Conditions)	-	5000	-
Cl-4.3.8(Storage)	-	5000	-
Cl-5.1(Mechanical Endurance)	-	5000	-
Cl-5.2(Charge Efficiency)	-	5000	-
Cl-5.3(Deep Discharge Protection)	-	5000	-
Cl-5.4(Marking)	-	5000	-
Cl-5.5(Safety)	-	5000	-
Cl-5.6(Documentation)	-	5000	-
Cl-6(Functional characteristice)	-	5000	-
Cl-7(General test conditions)	-	5000	-
Cl-8.1(Capacity Test)	-	20000	-
Cl-8.2(Endurance Test)	-	800000	-
Cl-8.3(Charge Retention Test)	-	30000	-
Cl-8.4(Cycle Endurance in Photovoltaic Application (Extreme Conditions))	-	1500000	-
Cl-8.5(Sulphation Test (Applicable for Lead Acid Batteries only))	-	25000	-
Cl-8.6(Water Loss Test (Valid for Flooded Lead Acid Batteries only))	-	40000	-
4.3.7.1(Specific gravity)	-	5000	-
Cl-9.1(Type Tests)	-	5000	-
Cl-9.2(Acceptance Test)	-	5000	-
Cl-4.3.9(Operating Temperature)	-	5000	-

-
Included.w.e.f.04.12.2024

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number