| 8791 |
CIPET, Vijayawada
| 6141334
| IS 10124 : Part 4 (2009) |
Fabricated pvc - U fittings for potable water supplies - Specification: Part 4 specific requirements for caps (Second Revision) |
63 - 630mm |
6050 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1(General) |
- |
5050 |
|
For Opacity Test = 700
Short Term Hydraulic Test = 1350
Effect on Water = 3000 |
| 3.2.2, Fig 1(Dimensions) |
- |
500 |
|
Nil |
| Table 1(Cl.3.2.2, and Fig.1)(Dimensions of Caps) |
- |
500 |
|
Nil |
|
06 Jun, 2027 |
-
Testing charges has been fixed for two years w.e.f. 30-05-2019 to 29-05-2021. |
| 8792 |
CIPET, Vijayawada
| 6141334
| IS 9755 (2021) |
Textiles - High Density Polyethylene (HDPE) / Polypropylene (pp) Woven Sacks for Packing Fertilizers |
Type-I, Type-II |
27350 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1(Raw Meterial) |
- |
2000 |
|
Nil |
| 4.2("Fabric
a) Width of Tape") |
- |
500 |
|
Nil |
| 4.2("Fabric
b) Linear Density") |
- |
700 |
|
Nil |
| 4.2("Fabric
c) Mesh") |
- |
500 |
|
Nil |
| 4.2("Fabric
d) Unlaminated Fabric Mass") |
- |
500 |
|
Nil |
| 4.3(Sacks) |
- |
500 |
|
Nil |
| 4.4.1(Thickness of Linear) |
- |
500 |
|
Nil |
| 4.4.2(Visual Observation) |
- |
500 |
|
Nil |
| 4.5(Mass of The Lamination) |
- |
500 |
|
Nil |
| 4.5(Laminated Fabric) |
- |
3000 |
|
Nil |
| 4.5(Lamination Over Hang of the fabric after trimming) |
- |
500 |
|
Nil |
| 4.6.1(Distance between the Two Row of Stitches) |
- |
500 |
|
Nil |
| 4.6.1(Distance of outer stitch from the edge of the bag) |
- |
500 |
|
Nil |
| 4.6.1(Depth of the Stitch( Double fold)) |
- |
500 |
|
Nil |
| 4.6.1(No.of Stitches/dm) |
- |
500 |
|
Nil |
| 4.6.2(Breaking Load of the stitching material Non UV Stabilized sack) |
- |
1100 |
|
Nil |
| 4.6.2(Breaking Load for UV Stabilized sack) |
- |
2000 |
|
Nil |
| 4.7(Mouth of the Sack) |
- |
500 |
|
Nil |
| "Table 1 of Cl. No.5.1 Sl. No. i"("Dimension
a) Inside Length Type 1 & Type 2
") |
- |
500 |
|
Nil |
| "Table 1 of Cl. No.5.1 Sl. No. i"("Dimension
b) Inside Width ") |
- |
0 |
|
Nil |
| "Table 1 of Cl. No.5.1 Sl. No. ii"(Ends/dm ( Type 1 & Type 2)) |
- |
500 |
|
Nil |
| "Table 1 of Cl. No.5.1 Sl. No. iii"(Picks /dm ( Type 1 & Type 2)) |
- |
500 |
|
Nil |
| "Table 1 of Cl. No.5.3 Sl. No. iv"("Mass of Fabric
a) Unlaminated Sack( Type 1 & Type 2)") |
- |
500 |
|
Nil |
| "Table 1 of Cl. No.5.3 Sl. No. iv"("Mass of Fabric
b) Laminated Sack( Type 1 & Type 2)") |
- |
500 |
|
Nil |
| "Table 1 of Cl. No.5.3 Sl. No. v"(Mass of Sack( Type 1 & Type 2)) |
- |
500 |
|
Nil |
| "Table 1 of Cl. No.5.4 Sl. No. vi"(Avg. Breaking Strength Of fabric (Ravelled strip method)( 325mm X 25 mm)) |
- |
3800 |
|
Nil |
| "Table 1 of Cl. No.5.4 Sl. No. vii"(Breaking Strength of Bottom Seam (Ravelled strip method)) |
- |
1100 |
|
Nil |
| "Table 1 of Cl. No.5.1 Sl. No. viii"("Elongation at Break of fabric
a)Length(Type 1 & Type 2)") |
- |
0 |
|
Nil |
| "Table 1 of Cl. No.5.1 Sl. No. viii"("Elongation at Break of fabric
b) Width(Type 1 & Type 2)") |
- |
0 |
|
Nil |
| "Table 1 of Cl. No.5.5 Sl. No. ix"("Ash Content
a) For UV Stabilized Sack") |
- |
1200 |
|
Nil |
| "Table 1 of Cl. No.5.5 Sl. No. ix"("Ash Content
b) For Non- UV Stabilized Sack") |
- |
1200 |
|
Nil |
| "Table 1 of Cl. No.5.6 Sl. No. x"(Drop Impact Strength) |
- |
850 |
|
Nil |
|
06 Jun, 2027 |
-
- |
| 8793 |
CIPET, Vijayawada
| 6141334
| IS 7834 : Part 2 (1987) |
injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 2 Specific requirements for 45 degrees elbows |
16-315mm |
8750 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| table 1 sl.no: 01(16
) |
- |
0 |
|
Nil |
| table 1 sl.no: 02(20
) |
- |
0 |
|
NIL |
| table 1 sl.no: 03(25
) |
- |
0 |
|
NIL |
| table 1 sl.no: 04(32
) |
- |
0 |
|
NIL |
| table 1 sl.no: 05(40
) |
- |
0 |
|
NIL |
| table 1 sl.no: 06(50
) |
- |
0 |
|
NIL |
| table 1 sl.no: 07(63
) |
- |
0 |
|
NIL |
| table 1 sl.no: 08(75
) |
- |
0 |
|
NIL |
| table 1 sl.no: 09(90
) |
- |
0 |
|
NIL |
| table 1 sl.no: 10(110
) |
- |
0 |
|
NIL |
| table 1 sl.no: 11(125
) |
- |
0 |
|
NIL |
| table 1 sl.no: 12(140
) |
- |
0 |
|
NIL |
| table 1 sl.no: 13(160
) |
- |
0 |
|
NIL |
| table 1 sl.no: 14(
180
) |
- |
0 |
|
NIL |
| table 1 sl.no: 16(225
) |
- |
0 |
|
NIL |
| table 1 sl.no: 17(250.0) |
- |
0 |
|
NIL |
| table 1 sl.no: 18(280.0) |
- |
0 |
|
NIL |
| table 1 sl.no: 19(315.0) |
- |
0 |
|
NIL |
| 2.1(General) |
- |
4400 |
|
For Effect On water test = 3000
Stress Relief Test =700
Opacity = 700 |
| 2.2.2, Table 1(Size) |
- |
500 |
|
For all dimensions |
| 2.2.3( inside diameter of the socket) |
- |
0 |
|
Included |
| 6.4 PART-1(Short term hydraulic test) |
- |
850 |
|
NIL |
| 6.1.1(VCM Content Test) |
- |
3000 |
|
NIL |
|
06 Jun, 2027 |
-
Testing charges has been fixed for two years w.e.f. 30-05-2019 to 29-05-2021. |
| 8794 |
CIPET, Vijayawada
| 6141334
| IS 7834 : Part 4 (1987) |
injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 4 Specific requirements for 90 degree tees |
16-350mm |
5750 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 2.2.2, Table 1(Size) |
- |
500 |
|
For all Dimension |
| 2.1(General) |
- |
5250 |
|
For Effect On water test = 3000
Stress Relief Test =700
Opacity = 700
Short Term Hydraulic Test = 850 |
| 2.2.3( inside diameter of the socket) |
- |
0 |
|
Included in dimension |
|
06 Jun, 2027 |
-
Testing charges has been fixed for two years w.e.f. 30-05-2019 to 29-05-2021. |
| 8795 |
CIPET, Vijayawada
| 6141334
| IS 7834 : Part 5 (1987) |
Injection Moulded PVC Socket Fittings With Solvent Cement Joints for Water Supplies - Part 5 : Specific Requirements for 45 degree Tees |
16-160mm |
5750 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 2.1(General) |
- |
5250 |
|
For Effect On water test = 3000
Stress Relief Test =700
Opacity = 700
Short Term Hydraulic Test = 850 |
| 2.2.2, Table 1(Size) |
- |
500 |
|
Nil |
|
06 Jun, 2027 |
-
Testing charges has been fixed for two years w.e.f. 30-05-2019 to 29-05-2021. |
| 8796 |
CIPET, Vijayawada
| 6141334
| IS 7834 : Part 6 (1987) |
injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 6 Specific requirements for sockets |
16-315mm |
5750 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 2.1(General) |
- |
5250 |
|
For Effect On water test = 3000
Stress Relief Test =700
Opacity = 700
Short Term Hydraulic Test = 850 |
| 2.2.2, Table 1(Size) |
- |
0 |
|
Nil |
| 2.2.3( inside diameter of the socket) |
- |
500 |
|
NIL |
|
06 Jun, 2027 |
-
Testing charges has been fixed for two years w.e.f. 30-05-2019 to 29-05-2021. |
| 8797 |
CIPET, Vijayawada
| 6141334
| IS 7834 : Part 7 (1987) |
injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 7 Specific requirements for unions |
16-63mm |
5750 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 2.2.2, Table 1(Size) |
- |
500 |
|
Nil |
| 2.1(General) |
- |
5250 |
|
For Effect On water test = 3000
Stress Relief Test =700
Opacity = 700
Short Term Hydraulic Test = 850 |
|
06 Jun, 2027 |
-
Testing charges has been fixed for two years w.e.f. 30-05-2019 to 29-05-2021. |
| 8798 |
CIPET, Vijayawada
| 6141334
| IS 7834 : Part 8 (1987) |
injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 8 Specific requirements for caps |
16-315mm |
5750 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 2.1(General) |
- |
5250 |
|
For Effect On water test = 3000
Stress Relief Test =700
Opacity = 700
Short Term Hydraulic Test = 850 |
| 2.2.2(diameter of the socket of cap) |
- |
500 |
|
Nil |
|
06 Jun, 2027 |
-
Testing charges has been fixed for two years w.e.f. 30-05-2019 to 29-05-2021. |
| 8799 |
CIPET, Vijayawada
| 6141334
| IS 12100 (1987) |
Specification for high density polyethylene (HDPE) woven sacks for packing flour |
Type-1 & 2 |
7400 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1, Table 1(Breaking strength of fabric on 5 × 20 cm strip, Widthwise) |
- |
1600 |
|
NIl |
| 3.1, Table 1(Breaking strength of fabric on 5 × 20 cm strip, Lengthwise) |
- |
1600 |
|
NIl |
| 3.1, Table 1(Seam breaking strength, Side team) |
- |
1600 |
|
NIl |
| 3.1, Table 1(Seam breaking strength, Bottom team) |
- |
1600 |
|
NIl |
| 3.2(Dimensions) |
- |
500 |
|
NIl |
| 3.3(Mass) |
- |
500 |
|
NIl |
|
06 Jun, 2027 |
-
Included w.e.f 13.08.2019. Testing charges has been fixed for two years w.e.f. 13.08.2019 to 12.08.2021 |
| 8800 |
CIPET, Vijayawada
| 6141334
| IS 15328 (2003) |
Unplasticized Non-Pressure Polyvinyl Chloride ( PVC -U ) Pipes for use in Underground Drainage and Sewerage Systems - |
63-630MM, STIFFNESS 2,4,8KN/M2 |
24250 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5,5.2(Composition of the material
The material shall contain a minimum of
0.3 percent of rutile grade titanium dioxide.) |
- |
1200 |
|
NIL |
| 6.1,6.1.1
IS 12235 (Part 1)
Table 1(Dimension of Pipes:
Mean outside Diameter, dem) |
- |
500 |
|
NIL |
| 6.1,6.1.1
IS 12235 (Part 1)
Table 1(Outside Diameter at any point, de) |
- |
0 |
|
NIL |
| 6.1.2
IS 4985
Table 2(Wall Thickness, e ) |
- |
500 |
|
NIL |
| 6.1.3 (Length of Pipe) |
- |
0 |
|
NIL |
| 6.1.4,
Table 3(Dimensions of integral sockets and spigot ends :-
a) Elastomeric Sealing Ringsockets and
spigot ends
i)Meean inside dia. Of socket, dsm) |
- |
0 |
|
NIL |
| 6.1.4,
Table 3(ii) Min. depth of engagement, A. ) |
- |
0 |
|
NIL |
| 6.1.4
Table 3(iii) Depth of sealing Zone C ) |
- |
0 |
|
NIL |
| 6.1.4,
Table 3(iv) Length of spigot, l1) |
- |
0 |
|
NIL |
| 6.1.4,
Table 3(v) Chamfer length, H : Approx.) |
- |
0 |
|
NIL |
| 6.1.4.1
(wall thickness of sockets
e2 min=0.9e
) |
- |
0 |
|
NIL |
| 6.1.4.1
(e3min=0.75e) |
- |
0 |
|
NIL |
| 6.1.4,
Table 4(b) Solvent Cement Joint sockets and
spigot ends
i) Mean inside dia. Of socket, dsm) |
- |
0 |
|
NIL |
| 6.1.4,
Table 4(ii) Length of Solvent Cement socket, l2 ) |
- |
0 |
|
NIL |
| 6.1.4,
Table 4(iii) Length of spigot, l1, 100 mm Min.) |
- |
0 |
|
NIL |
| 6.1.4,
Table 4(iv) Chamfer length, H, 7 mm Approx.) |
- |
0 |
|
NIL |
| 7(Physical characteristics
) |
- |
0 |
|
NIL |
| 7.1(Appearance:-
) |
- |
500 |
|
NIL |
| 7.2(Colour ) |
- |
500 |
|
NIL |
| 7.3
IS 1223S
( Part 2)(Vicat Softening Temperature
When determined according to IS 1223S
( Part 2), shall not be lessthan 79°C.) |
- |
1100 |
|
NIL |
| 7.4
IS 1223S ( Part 5)(Longitudinal Reversion:
When tested according to the methodprescribed in IS 1223S ( Part 5), shall not exceed ± 5 percent.
The pipe shall not exhibit any blisters, bubbles or crackson completion of the test.) |
- |
1200 |
|
INCLUDES SPECIMEN CHARGE |
| 8(MECHANICAL CHARACTERISTICS) |
- |
0 |
|
NIL |
| 8.1
Annex B(Resistance to External Blows at 0ºC:
When tested according to the method prescribed in Annex B, the pipes hall have a true impact rate of not more than I0 percent.) |
- |
1600 |
|
INCLUDES SPECIMEN CHARGE |
| 8.2
Annex C
Table 5(Ring Stiffness:
When tested according to the method described in Annex C,the ring stiffness of the pipe shall be as stated in Table 5) |
- |
1600 |
|
INCLUDES SPECIMEN CHARGE |
| 8.3
IS 12235 ( Part 8/ Sec 1 )
Table 6(Resistance to internal Hydrostatic Pressure(Type Test)
a) Acceptance Test:(1h at 27 0 C)
) |
- |
850 |
|
NIL |
| 8.3
IS 12235 ( Part 8/ Sec 1 )
Table 6(b) Type Test:(1000h at 60 0 C)
) |
- |
11000 |
|
NIL |
| 9
9.1, IS 5382(JOINTS:-
a) Elastomeric Sealing Rings) |
- |
0 |
|
NIL |
| 9.2
IS 14182(b) Solvent cement) |
- |
0 |
|
NIL |
| 10(Performance requirements) |
- |
0 |
|
NIL |
| 10.1.1
Annex D(Internal hydrostatic pressure test for elastomeric sealing ring joints) |
- |
850 |
|
NIL |
| 10.1.2
Annex E(Internal negative hydrostatic pressure test (internal vacuum) for elastomeric sealing ring joints) |
- |
1000 |
|
NIL |
| 10.2.1(Internal hydrostatic pressure test for solvent cemented Joints) |
- |
850 |
|
NIL |
| 10.2.2(Internal negative hydrostatic pressure test (internal vacuum)for solvent cemented joints) |
- |
1000 |
|
NIL |
|
06 Jun, 2027 |
-
Included w.e.f 13.08.2019.
Testing charges has been fixed for two years w.e.f. 13.08.2019 to 12.08.2021 |
| 8801 |
CIPET, Vijayawada
| 6141334
| IS 14735 (1999) |
Unplasticized Polyvinyl Chloride (UPVC) Injection Moulded Fittings for Soil and Waste Discharge System for Inside and Outside Buildings Including Ventilation and Rain Water System - |
UPTO 160MM |
14650 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 19(Marking) |
- |
0 |
|
NIL |
| 3(Type of Fitting) |
- |
0 |
|
NIL |
| 4(Size Designation) |
- |
0 |
|
NIL |
| 5(Colour of fittings) |
- |
500 |
|
NIL |
| 7.1,Table 1(Wall thickness) |
- |
500 |
|
NIL |
| 7.2 ,Table 2&3(Socket Dimensions) |
- |
0 |
|
INCLUDED IN 7.1 |
| 7.3(Dimensions of waste trap(Nahani Trap) |
- |
0 |
|
NIL |
| 8(Sealing Rings) |
- |
500 |
|
NIL |
| 10(Workmanship) |
- |
500 |
|
NIL |
| 11(Design requirements) |
- |
500 |
|
NIL |
| 11.1(Solvent cement type or Rubber ring type) |
- |
0 |
|
NIL |
| 11.2(Socket and spigot configeration) |
- |
0 |
|
NIL |
| 11.4,Table 5(Vent cowl) |
- |
0 |
|
NIL |
| 11.5,Table 6(Pipe Clips) |
- |
0 |
|
NIL |
| 12(Physical test requirements) |
- |
0 |
|
NIL |
| 12.1(Visual appearance) |
- |
500 |
|
NIL |
| 12.2(Stress relief test) |
- |
700 |
|
NIL |
| 12.3(Vicat softening tempewrature) |
- |
1100 |
|
NIL |
| Cl.13, IS 12235 (P-7)-2004, (Resistance to Sulphuric Acid) |
- |
2500 |
|
INCLUDES CONDITIONING CHARGE |
| Cl.14, Annex A(Titanium Di-Oxide Content) |
- |
1200 |
|
NIL |
| Cl.15, Annex B(Sulphated Ash Content) |
- |
1200 |
|
NIL |
| 16(Mechanical Properties) |
- |
0 |
|
NIL |
| 16.1(Impact test) |
- |
1100 |
|
NIL |
| 17(Watet tightness of joint) |
- |
850 |
|
NIL |
| 12.4(Effect on water test) |
- |
3000 |
|
NIL |
|
06 Jun, 2027 |
-
Included w.e.f 13.08.2019.
Testing charges has been fixed for two years w.e.f. 13.08.2019 to 12.08.2021 |
| 8802 |
CIPET, Vijayawada
| 6141334
| IS 16208 (2015) |
Textiles - High density polyethylene (HDPE)/polypropylene (PP) woven sacks for packaging 10 kg, 15 kg, 20 kg, 25 kg and 30 kg foodgrains - Specification |
HDPE/PP, CAPACTY: 10, 15,20,25 & 30KG |
22630 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3(TYPES) |
- |
0 |
|
NIL |
| 4.1(Raw Material) |
- |
1050 |
|
NIL |
| 4.2(Tapes – Width
IS 6192 and IS 11197) |
- |
500 |
|
NIL |
| 4.2(Tapes – Linear Density
) |
- |
700 |
|
NIL |
| 4.2(Construction) |
- |
500 |
|
NIL |
| 4.3(Sacks) |
- |
500 |
|
NIL |
| 4.3.1(Bottom Seam) |
- |
0 |
|
NIL |
| 4.3.1( The two rows of stitches shall be separated from each other) |
- |
0 |
|
NIL |
| 4.3.1( The outer stitch) |
- |
0 |
|
NIL |
| 4.3.1( The stitching shall be done with double fold over seam to a depth ) |
- |
0 |
|
NIL |
| 4.3.1(Stitches pass through a minimum of six layers of the fabric. ) |
- |
0 |
|
NIL |
| 4.3.1(The number of stitches/dm) |
- |
0 |
|
NIL |
| 4.3.2(Mouth) |
- |
0 |
|
NIL |
| 4.4 and Table 1 i(Capacity) |
- |
500 |
|
NIL |
| 5.2 and Table 1 ii a(Dimensions Inside Length) |
- |
500 |
|
NIL |
| 5.2 and Table 1 ii b(Dimensions Inside Width) |
- |
0 |
|
NIL |
| 5.2 and Table 1 iii(Ends per dm ) |
- |
500 |
|
NIL |
| 5.2 and Table 1 iv(Picks per dm ) |
- |
500 |
|
NIL |
| 5.1 and Table 1 v(Mass of sack ) |
- |
500 |
|
NIL |
| 5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise ) |
- |
1100 |
|
NIL |
| 5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise ) |
- |
1100 |
|
NIL |
| 5.2 and Table 1 vi(Breaking strength of bottom seam ) |
- |
1100 |
|
NIL |
| 5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise) |
- |
0 |
|
INCLUDES IN BREAKING STRENGTH |
| 5.2 and Table 1 viii b(Elongation at break of fabric Widthwise ) |
- |
0 |
|
INCLUDES IN BREAKING STRENGTH |
| 5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering ) |
- |
12380 |
|
INCLUDES UV CONDITIONING CHARGE |
| 5.2 and Table 1 x(Ash content ) |
- |
1200 |
|
NIL |
|
06 Jun, 2027 |
-
0.0 |
| 8803 |
CIPET, Vijayawada
| 6141334
| IS 14968 (2015) |
Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing 50 Kg/25 kg sugar – Specification (first revision) |
SIZE 25 & 50 KG |
23130 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3(TYPES) |
- |
0 |
|
NIL |
| 4.1(Raw Material) |
- |
1050 |
|
NIL |
| 4.2(Tapes – Width
IS 6192 and IS 11197) |
- |
500 |
|
NIL |
| 4.2(Tapes – Linear Density
) |
- |
700 |
|
NIL |
| 4.2(Construction) |
- |
500 |
|
NIL |
| 4.3(Sacks) |
- |
500 |
|
NIL |
| 4.3.1(Bottom Seam) |
- |
500 |
|
NIL |
| 4.3.1(The two rows of stitches shall be separated from each other) |
- |
0 |
|
NIL |
| 4.3.1( The outer stitch) |
- |
0 |
|
NIL |
| 4.3.1( The stitching shall be done with double fold over seam to a depth ) |
- |
0 |
|
NIL |
| 4.3.1(Stitches pass through a minimum of six layers of the fabric. ) |
- |
0 |
|
NIL |
| 4.3.1(stitches/dm) |
- |
0 |
|
NIL |
| 4.3.2(Mouth) |
- |
0 |
|
NIL |
| 4.4(Liner
IS 10146 or IS 10910.) |
- |
0 |
|
NIL |
| 4.4(Mass of the loose liner ) |
- |
0 |
|
NIL |
| 4.4(Width of the loose liner) |
- |
0 |
|
NIL |
| 4.4(Length of the line) |
- |
0 |
|
NIL |
| 4.4(Bottom seam of the loose liner) |
- |
0 |
|
NIL |
| 4.4.1(Liner) |
- |
0 |
|
NIL |
| 4.5 and Table 1 i(Capacity) |
- |
500 |
|
NIL |
| 5.2 and Table 1 ii a(Dimensions Inside Length) |
- |
500 |
|
NIL |
| 5.2 and Table 1 ii b(Dimensions Inside Width) |
- |
0 |
|
NIL |
| 5.2 and Table 1 iii(Ends per dm ) |
- |
500 |
|
NIL |
| 5.2 and Table 1 iv(Picks per dm ) |
- |
500 |
|
NIL |
| 5.1 and Table 1 v a(Mass of unlaminated sack
IS 1964) |
- |
500 |
|
NIL |
| 5.1 and Table 1 v b(Mass of unlaminated sack with liner
) |
- |
0 |
|
NIL |
| 5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise
IS 1969 (Part 1)) |
- |
1100 |
|
NIL |
| 5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise
IS 1969 (Part 1)) |
- |
1100 |
|
NIL |
| 5.2 and Table 1 vi(Breaking strength of bottom seam
IS 9030
) |
- |
1100 |
|
NIL |
| 5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise
IS 1969 (Part 1)) |
- |
0 |
|
NIL |
| 5.2 and Table 1 viii b(Elongation at break of fabric Widthwise
IS 1969 (Part 1)) |
- |
0 |
|
NIL |
| 5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering ) |
- |
12380 |
|
INCLUDES UV CONDITIONING CHARGE |
| 5.2 and Table 1 x(Ash content ) |
- |
1200 |
|
NIL |
|
06 Jun, 2027 |
-
. |
| 8804 |
CIPET, Vijayawada
| 6141334
| IS 14887 (2014) |
Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision) |
HDPE/PP , CAPACITY 50KG |
28380 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.2(Tapes – Width and Thickness
( IS 6192/IS 11197)) |
- |
500 |
|
NIL |
| 3.2(Tapes – Linear Density
(IS 6192/IS 11197)) |
- |
500 |
|
NIL |
| 3.2(Tapes – Tenacity (IS 6192/IS 11197)) |
- |
500 |
|
NIL |
| 3.2(Tapes – Elongation at point of rupture
(IS 6192/IS 11197)) |
- |
1100 |
|
NIL |
| 3.2(Tapes – Heat Shrinkage (HDPE) (Cl. 3.2 and IS 6192)) |
- |
1700 |
|
NIL |
| 3.2(Tapes – Colour Fastness for pigmented tapes (IS 6192/IS 11197)) |
- |
1000 |
|
NIL |
| 3.2(Tapes – Dimensional stability (PP)
(IS 11197)) |
- |
1000 |
|
NIL |
| 3.2(Unlaminated Fabric Mass ) |
- |
500 |
|
NIL |
| 3.3.1(Bottom seam (IS 10789)) |
- |
2700 |
|
INCLUDES ALL SEAM TESTS |
| 4.1 and 3.4(Mass of bale (Cl. 4.1), Capacity (Cl 3.4)) |
- |
500 |
|
NIL |
| 4.2 and Table 1 ii(Dimensions ) |
- |
500 |
|
NIL |
| 5.2 and Table 1 iii(Ends per dm ) |
- |
500 |
|
NIL |
| 5.2 and Table 1 iv(Picks per dm ) |
- |
500 |
|
NIL |
| 4.2 and Table 1 v(Mass of sack ) |
- |
500 |
|
NIL |
| 4.2 and Table 1 vi(Average breaking strength of fabric ) |
- |
2200 |
|
LENGTH & WIDTH WISE |
| 4.2 and Table 1 vi(Breaking strength of bottom seam ) |
- |
1100 |
|
NIL |
| 4.2 and Table 1 viii(Elongation at break of fabric ) |
- |
0 |
|
INCLUDES IN BREAKING STRENGTH |
| 4.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering ) |
- |
12380 |
|
INCLUDES SPECIMEN CONDITIONING CHARGES |
| 4.2 and Table 1 x(Ash content ) |
- |
1200 |
|
NIL |
|
06 Jun, 2027 |
-
. |
| 8805 |
CIPET, Vijayawada
| 6141334
| IS 14252 (2015) |
Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sack for filling sand – Specification (second revision) |
HDPE OR PP |
25930 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1(Raw Material) |
- |
1050 |
|
NIL |
| 3.2(Tapes – Width
) |
- |
500 |
|
NIL |
| 3.2(Tapes – Linear Density
) |
- |
700 |
|
NIL |
| 3.3(Tying Cord) |
- |
500 |
|
NIL |
| 3.4(Sack) |
- |
500 |
|
NIL |
| 3.4.1(Seam) |
- |
2700 |
|
INCLUDED ALL SEAM TESTS |
| 4.1 and Table 1 i a(Dimensions Outside Length) |
- |
500 |
|
NIL |
| 4.1 and Table 1 i b(Dimensions Outside Width) |
- |
0 |
|
INCLUDED IN 4.1 |
| 4.1 and Table 1 ii(Ends per dm ) |
- |
500 |
|
NIL |
| 4.1 and Table 1 iii(Picks per dm ) |
- |
500 |
|
NIL |
| 4.2 and Table 1 iv(Mass of sack
) |
- |
500 |
|
NIL |
| 4.1 and Table 1 v a(Average breaking strength of fabric Warpway
) |
- |
1100 |
|
NIL |
| 4.1 and Table 1 v b(Average breaking strength of fabric Weftway
) |
- |
1100 |
|
NIL |
| 4.1 and Table 1 vi(Average Breaking strength of bottom seam ) |
- |
2200 |
|
INCLUDES TOP & BOTTOM SEAM |
| 4.1 and Table 1 vii a(Elongation at break of fabric Lengthwise) |
- |
0 |
|
INCLUDES IN 4.1 |
| 4.1 and Table 1 vii b(Elongation at break of fabric Widthwise ) |
- |
0 |
|
INCLUDES IN 4.1 |
| 4.1 and Table 1 viii(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering ) |
- |
12380 |
|
INCLUDES WEATHERING CHARGES OF RS 10180 |
| 4.1 and Table 1 ix(Ash content ) |
- |
1200 |
|
NIL |
|
06 Jun, 2027 |
-
0.0 |
| 8806 |
CIPET, Vijayawada
| 6141334
| IS 13592 (2013) |
Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Soil and Waste Discharge System Inside and Outside Buiildings Including Ventilation and Rainwater System |
UPTO 315MM, TYPE -A & B, PLAIN & GROOVED SOCKET |
19200 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl.5(Surface colour of the pipes shall be dark shade of grey) |
- |
500 |
|
NIL |
| Cl6.3(The composition shall be based on PVC resin
having a K-value of 64 or greater when tested in
accordance with IS 4669) |
- |
1100 |
|
NIL |
| Cl.7.1(Mean out side Diameter (For less than or equal to 40 mm- Average of 8 , For higher diameters up to 110 mm average of 6)) |
- |
500 |
|
NIL |
| Cl.7.1(Outside Diameter at any point (Take 8 reading reported minimum, maximum)) |
- |
0 |
|
INCLUDED IN 7.1 |
| Cl.7.1(Wall thickness "minimum,maximum" (Take 8 reading)) |
- |
0 |
|
INCLUDED IN 7.1 |
| Cl.7.2(Pipes shall be supplied in nominal lengths of 2, 3, 4 or
6 metres either plain or with socket for solvent
cementing/grooved socket. Tolerances on specified
length shall be + 10 mm and – 0 mm.The nominal length of the pipe with socket for solvent
cementing/grooved socket shall be as given in Fig. 1.) |
- |
0 |
|
INCLUDED IN 7.1 |
| Cl.7.3.1(Minimum wall thickness of socket on pipes shall
be as given in Table 2 read with Fig. 2 and Fig. 3.) |
- |
0 |
|
INCLUDED IN 7.1 |
| Cl.7.3.2(Dimensions of sockets for solvent cementing and
grooved sockets of pipes shall be as given in Tables 3
and 4 respectively, read with Fig. 2 and 3.) |
- |
0 |
|
INCLUDED IN 7.1 |
| Cl.8.1(The internal and external surface of the pipes shall be
smooth and clean, and free from grooving and other
defects. The end shall be clearly cut and shall be square
with the axis of the pipe. The end may be chamfered
on the plain side.) |
- |
500 |
|
NIL |
| Cl.8.2(When tested by the method described in IS 12235
(Part 5), a length of pipe sample of 200 ± 20 mm shall
not alter in length by more than 5 percent. In the case
of socket ended pipes, this test shall be carried out on
the plain portion of pipe taken at least 100 mm away
from the root of the socket.) |
- |
1200 |
|
INCLUDES SPECIMEN CHARGE |
| Cl8.3(This test shall be carried out for socket end pipes only.
When tested by the method described in IS 12235
(Part 6), the test specimens shall not show blisters,
excessive delamination or cracking or signs of weld
line splitting.) |
- |
700 |
|
NIL |
| Cl.8.4(When determined in accordance with IS 12235 (Part 2),
the vicat softening temperature of the specimen shall
not be less than 79°C.) |
- |
1100 |
|
NIL |
| Cl.8.5(After the required
period of exposure, the tensile strengths of two samples when tested as per IS 12235 (Part 13) shall not show
difference of more than 20 percent of their initial tensile
strengths) |
- |
4850 |
|
INCLUDES EXPOSURE TO SUNLIGHT |
| Cl. 9, IS 12235 Part 7(Resistance to Sulphuric Acid) |
- |
2500 |
|
INCLUDES SPECIMEN CHARGE |
| Cl.10.1(When tested by method prescribed in IS 12235 (Part 9),the pipe shall have a true impact rate of not more than
10 percent. Mass of striker and height of fall shall be
as per Annex A.) |
- |
1600 |
|
INCLUDES SPECIMEN CHARGE |
| Cl.10.2(When determined in accordance with the method
described in IS 12235 (Part 13), the tensile strength at
break shall not be less than 45 MPa.) |
- |
1800 |
|
INCLUDES SPECIMEN CHARGE |
| Cl.10.3(The axial shrinkage shall not exceed 2 percent when
determined in accordance with Annex B.) |
- |
850 |
|
NIL |
| Cl.11.(Jointing of solvent
cementing joints is to be carried out using solvent
conforming to IS 14182.
Apply a pressure of 0.05 MPa for a period of 15 min
and there should be no leakage at any joint.) |
- |
1000 |
|
NIL |
| Cl. 12, IS 12235 Part 11(Resistance to Di-Chloro-Methane) |
- |
1000 |
|
NIL |
|
06 Jun, 2027 |
-
Testing charges has been fixed for two years w.e.f. 30-05-2019 to 29-05-2021. |
| 8807 |
CIPET, Vijayawada
| 6141334
| IS 12818 (2010) |
Unplasticized polyvinyl chloride (Pvc - U) screen and casing pipes for bore/tubewells - Specification (Second Revision) |
SIZE 35MM - 400 MM |
14550 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 9.6(Vicat Softening Temperature
IS 12235 (Part 2).) |
- |
1100 |
|
NIL |
| 9.5(Tensile Strength
IS 12235(Part 13)) |
- |
1800 |
|
INCLUDES SPECIMEN CHARGE |
| 9.4 and Table 14(Resistance to External Blows at 0 ?C
IS 12235 (Part 9)) |
- |
1500 |
|
INCLUDES SPECIMEN CHARGE |
| 9.3(Density
IS 12235 (Part 14)) |
- |
700 |
|
NIL |
| 9.1( Visual Appearance) |
- |
500 |
|
NIL |
| 8.4.1 and Table 13
Fig 3B & 4B(Dimensions of sealing elements) |
- |
500 |
|
NIL |
| 7.5 and Table 10
Fig 2A & 2B(Approximate Free Passage Area, in Percent (Mean Value) for Width of Slot (w)) |
- |
1500 |
|
NIL |
| 7.5 and Table 10
Fig 2A & 2B(Minimum number of slots on the circumference of the cross-section.) |
- |
0 |
|
NIL |
| 7.5 and Table 10
Fig 2A & 2B(Summation of slot lengths over internal circumference of the cross- section.) |
- |
0 |
|
NIL |
| 9.2(Internal Diameter) |
- |
500 |
|
NIL |
| 8.4(Sealing rings - Hardness) |
- |
500 |
|
NIL |
| 8.1 to 8.3 and Table 11 &12
Fig 3A & 4A(THREADING OF SCREEN ANDCASING PIPES.
IS 554.) |
- |
500 |
|
NIL |
| 8.1 to 8.3 and Table 11 &12
Fig 3A & 4A(THREADING OF SCREEN ANDCASING PIPES.
IS 554.) |
- |
0 |
|
INCLUDED IN 8.1&8.3 |
| 7.4 Table 8 & 9 Fig 1(Segmental length for Spigot (average of 4.0)) |
- |
0 |
|
NIL |
| 7.4 Table 8 & 9 Fig 1(Segmental length,mm for socket (average of 4.0)) |
- |
0 |
|
INCLUDED IN SEGMENTAL LENGTH L5 |
| 7.4 Table 8 & 9
Fig 1(Segmental length, l3) |
- |
0 |
|
INCLUDED IN SEGMENTAL LENGTH L5 |
| 7.4 Table 8 & 9
Fig 1(Effective length, l2) |
- |
0 |
|
INCLUDED IN SEGMENTAL LENGTH L5 |
| 7.3.2(Rib height) |
- |
0 |
|
INCLUDED IN SEGMENTAL LENGTH L5 |
| 7.3.1(No.of Ribs) |
- |
0 |
|
INCLUDED IN SEGMENTAL LENGTH L5 |
| 7.2 and Table 5, 6 & 7
Fig 1B(Wall thickness, Max) |
- |
0 |
|
INCLUDED IN SEGMENTAL LENGTH L5 |
| 7.2 and Table 5, 6 & 7
Fig 1B(Wall thickness, Min) |
- |
0 |
|
INCLUDED IN SEGMENTAL LENGTH L5 |
| 7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Mean outside dia over connection,mm (Take 4 reading and maximum valu reported)) |
- |
0 |
|
INCLUDED IN SEGMENTAL LENGTH L5 |
| 7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point, Max) |
- |
0 |
|
INCLUDED IN SEGMENTAL LENGTH L5 |
| 7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point , Min) |
- |
0 |
|
INCLUDED IN SEGMENTAL LENGTH L5 |
| 7.2 and Table 5, 6 & 7
Fig 1B(Mean Outer Diameter of Pipe , Max) |
- |
0 |
|
INCLUDED IN SEGMENTAL LENGTH L5 |
| 7.2 and Table 5, 6 & 7
Fig 1B(Mean Outer Diameter of Pipe, Min) |
- |
0 |
|
INCLUDED IN SEGMENTAL LENGTH L5 |
| 7.2 and Table 5, 6 & 7
Fig 1B(Nominal Diameter) |
- |
0 |
|
INCLUDED IN SEGMENTAL LENGTH L5 |
| 7.2 and Table 5, 6 & 7
Fig 1B(DIMENSIONS - Casing Pipes) |
- |
0 |
|
NIL |
| 7.1 and Table 1, 2, 3, & 4
Fig 1A & 1B(Wall thickness) |
- |
0 |
|
INCLUDED IN DIMENSION 7.2 |
| 7.1 and Table 1, 2, 3, & 4
Fig 1A & 1B(Mean Outer Diameter over Connection) |
- |
0 |
|
INCLUDED IN DIMENSION 7.2 |
| 7.1 and Table 1, 2, 3, & 4
Fig 1A & 1B(Outer Diameter at any point ) |
- |
0 |
|
INCLUDED IN DIMENSION 7.2 |
| 7.1 and Table 1, 2, 3, & 4
Fig 1A & 1B(Mean Outer Diameter of Pipe) |
- |
0 |
|
INCLUDED IN DIMENSION 7.2 |
| 7.1 and Table 1, 2, 3, & 4
Fig 1A & 1B(Nominal Diameter) |
- |
0 |
|
INCLUDED IN DIMENSION 7.2 |
| 4.1.2 (Ref. Cl 11 of IS 4669)(Composition -Sulphated ash content ) |
- |
1200 |
|
NIL |
| 4.1.2 (Ref. Cl 5.1. of IS 4669)(Composition - Loss on heating ) |
- |
0 |
|
NIL |
| 4.1.1 (Ref. 3.4.1. of IS 10151)(Composition - The monomer content (VCM content) in the
resin - Annex A ofIS 10151) |
- |
2750 |
|
NIL |
| 5(COLOUR) |
- |
500 |
|
NIL |
| 4.1.2(K-Value as per IS-4669) |
- |
1000 |
|
NIL |
|
06 Jun, 2027 |
-
- |
| 8808 |
CIPET, Vijayawada
| 6141334
| IS 12786 (2024) |
Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification (first revision) |
SIZE 12 MM, 16 MM, 20 MM, 25MM, 32MM. CLASS 1,2, & 3 |
14875 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1.c.i (Density) |
- |
1325 |
|
FOR RAW MATERIAL |
| 4.1.c.ii (Toluene extract - Annex A) |
- |
1100 |
|
FOR RAW MATERIAL |
| 4.1.c.iii (Volatile matter - Annex B ) |
- |
700 |
|
FOR RAW MATERIAL |
| 4.1.c & 4.2.a (Carbon Black content - IS 2530 : 1963) |
- |
925 |
|
FOR RAW MATERIAL |
| 4.2.b (The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963) |
- |
700 |
|
FOR RAW MATERIAL |
| 4.3(Addition of not more than 10 percent of the manufactures own rework material produced during the manufacture and works testing of pipe complying with this standard is permitted. No other rework material shall be used) |
- |
0 |
|
NIL |
| 7.3(Tensile Test) |
- |
1800 |
|
NIL |
| 7.3(Elongation at Break) |
- |
0 |
|
CHARGES INCLUDED IN TENSILE |
| 7.4(SusceptibiIity to Environmental Stress
Cracking) |
- |
1200 |
|
NIL |
| Cl-4.1(Material) |
- |
0 |
|
NIL |
| Cl-4.2(Carbon content of finished PE lateral pipe) |
- |
925 |
|
NIL |
| Cl-5.1(Dimensions of pipes and wall thicknesses) |
- |
500 |
|
NIL |
| Cl-6.0(Visual Appearance) |
- |
500 |
|
NIL |
| Cl-7.1(Hydraulic Characteristics- Internal pressure creep rupture test) |
- |
3000 |
|
NIL |
| Cl-7.1(Hydraulic Characteristics- quality acceptance test) |
- |
1000 |
|
NIL |
| Cl-7.2(Reversion Test) |
- |
1200 |
|
NIL |
| Cl-7.3(Tensile Test) |
- |
0 |
|
NIL |
| Cl-7.4(Susceptibility to Environmental Stress Cracking) |
- |
0 |
|
NIL |
| 5.1 & Table 1(Dimensions of Pipes - Outside diameters) |
- |
0 |
|
NIL |
| 5.1 & Table 1(Dimensions of Pipes - Wall thickness) |
- |
0 |
|
NIL |
| 6(Visual Appearance) |
- |
0 |
|
NIL |
|
06 Jun, 2027 |
-
- |
| 8809 |
CIPET, Vijayawada
| 6141334
| IS 12701 (1996) |
Rotational moulded polyethylene water storage tanks - specification (First Revision) |
CAPACITY 200-20000L |
13700 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.2.3(Carbon Black Content ) |
- |
900 |
|
NIL |
| 5.1 Table 1(Dimensioas of Cylinderical Vertical Tank) |
- |
5000 |
|
INCLUDES ALL DIMENSIONAL CHARGES |
| 4.2.3(Carbon Dispersion Test) |
- |
0 |
|
NIL |
| 5.2 Table 2(Dimensions of Rectangular Loft Tanks) |
- |
0 |
|
INCLUDES ALL DIMENSIONAL CHARGES |
| 6.1(Finish) |
- |
500 |
|
NIL |
| 7.1.1(Resistance to Deformation) |
- |
700 |
|
NIL |
| 7.1.2(Resistance to Deformation) |
- |
0 |
|
NIL |
| 7.2(Resistance to Impact) |
- |
1000 |
|
NIL |
| 7.4(Tensile Strength) |
- |
1800 |
|
INCLUDES SPECIMEN CHARGE |
| 7.5(Flexural Modulus) |
- |
1600 |
|
INCLUDES SPECIMEN CHARGE |
| 7.6(overall Migration) |
- |
2200 |
|
INCLUDES SPECIMEN CHARGE |
|
06 Jun, 2027 |
-
Testing charges has been fixed for two years w.e.f. 30-05-2019 to 29-05-2021. |
| 8810 |
CIPET, Vijayawada
| 6141334
| IS 10124 : Part 2 (2009) |
Fabricated pvc - U fittings for potable water supplies - Specification: Part 2 specific requirements for sockets (Second Revision) |
SIZE 20MM TO 630MM, CLASS 1-6 |
6750 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 10.3 of IS 4985 & Cl. 3.1 of IS 12235(P-4)(Effect on water: Lead (First Extraction)) |
- |
3000 |
|
NIL |
| 10.3 of IS 4985 & Cl. 3.1 of IS 12235(P-4)(Effect on water: Lead (Third Extraction)) |
- |
0 |
|
CHARGES INCLUDED IN LEAD 1ST EXTRACTION |
| 10.3 of IS 4985 & Cl. 3.1 of IS 12235(P-10)(Effect on water:Dialkyl tin C4 and
higher homologues
measured as tin (third
extraction)) |
- |
0 |
|
CHARGES INCLUDED IN LEAD 1ST EXTRACTION |
| 10.3 of IS 4985 & Cl. 3.2 of IS 12235(P-4)(Effect on water: Cadmium (all three extracts)) |
- |
0 |
|
CHARGES INCLUDED IN LEAD 1ST EXTRACTION |
| 10.3 of IS 4985 & Cl. 3.2 of IS 12235(P-4)(Effect on water: Mercury (all three extracts)) |
- |
0 |
|
CHARGES INCLUDED IN LEAD 1ST EXTRACTION |
| 10.3 of IS 4985 & Cl. 3.2 of IS 12235(P-10)(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction)) |
- |
0 |
|
CHARGES INCLUDED IN LEAD 1ST EXTRACTION |
| 10.7 of IS 4985(Sulphated Ash content, Annex-B of IS 4985) |
- |
1200 |
|
NIL |
| 3.2.1, Table-1, Fig-1(B) |
- |
500 |
|
NIL |
| 3.2.1, Table-1, Fig-1(Minimum wall thickness for working pressure) |
- |
0 |
|
CHARGES INCLUDED IN DIMENSION |
| Clause 3.2.2, and Fig. 2.(B) |
- |
0 |
|
CHARGES INCLUDED IN DIMENSION |
| 3.2.2, and Fig. 2(Dimensions of Socket for Elastomeric Sealing Ring Joint) |
- |
0 |
|
CHARGES INCLUDED IN DIMENSION |
| 3.1(General) |
- |
2050 |
|
For Opacity Test = 700
Short Term Hydraulic Test = 1350 |
|
06 Jun, 2027 |
-
Testing charges has been fixed for two years w.e.f. 30-05-2019 to 29-05-2021. |
| 8811 |
CIPET, Vijayawada
| 6141334
| IS 10124 : Part 1 (2009) |
Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 1 General Requirements (Second Revision) |
SIZE 20 TO 630MM |
6650 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3(Material) |
- |
1100 |
|
FOR PVC RESIN K-Value |
| 5.1 Table-1 Fig.1(Dimension of Socket length) |
- |
500 |
|
NIL |
| 5.1.2 Table-1(Dimensions of mean inside diameter at mid-point of socket depth) |
- |
0 |
|
CHARGES INCLUDED IN DIMENSION |
| 5.1.3 (Out of Roundness Tolerance of Socket Inside Diameter) |
- |
0 |
|
CHARGES INCLUDED IN DIMENSION |
| 5.2 Table-2 Fig.2(Dimensions of socket for elastomeric sealing ring) |
- |
0 |
|
CHARGES INCLUDED IN DIMENSION |
| 6.1(Opacity test in accordance with IS 12235 (Part 3)) |
- |
700 |
|
NIL |
| 6.2(Short Term Hydraulic Test in accordance with Annex A) |
- |
1350 |
|
NIL |
| 8(Marking) |
- |
0 |
|
NIL |
| 6.3(Effect on water test) |
- |
3000 |
|
Nil |
|
06 Jun, 2027 |
-
0.0 |
| 8812 |
CIPET, Vijayawada
| 6141334
| IS 7834 : Part 3 (1987) |
injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 3 Specific requirements for 90 degree elbows |
SIZE 16-315 MM |
3500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| cl 2.2.2(Dimensions) |
- |
500 |
|
NIL |
| Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Lead (first extraction) - Appendix C ) |
- |
3000 |
|
NIL |
| Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Lead (third extraction) - Appendix C) |
- |
0 |
|
CHARGES INCLUDED IN LEAD 1ST EXTRACTION |
| Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Dialkyl tin C4 and higher homologues measured as tin (third extraction) - Appendix C) |
- |
0 |
|
CHARGES INCLUDED IN LEAD 1ST EXTRACTION |
| Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Other toxic substances (third extraction) - Appendix C) |
- |
0 |
|
CHARGES INCLUDED IN LEAD 1ST EXTRACTION |
|
06 Jun, 2027 |
-
Testing charges has been fixed for two years w.e.f. 30-05-2019 to 29-05-2021. |
| 8813 |
CIPET, Vijayawada
| 6141334
| IS 7834 : Part 1 (1987) |
injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 1 General requirements |
SIZE 16-315MM |
6250 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl.4(Minimum Thickness) |
- |
500 |
|
NIL |
| Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Minimum Socket Length) |
- |
0 |
|
CHARGES INCLUDED IN THICKNESS |
| Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Mean Socket Internal Diameter at Mid-Point of Socket Length) |
- |
0 |
|
CHARGES INCLUDED IN THICKNESS |
| Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Out-of-roundness tolerances of socket inside diameter) |
- |
0 |
|
CHARGES INCLUDED IN THICKNESS |
| Cl. 6.1(Stress Relief Test- Appendix A) |
- |
700 |
|
NIL |
| Cl. 6.3(Effect on Water[(Lead ( first extraction )]- Appendix C) |
- |
3000 |
|
NIL |
| Cl. 6.3(Effect on Water[(Lead ( third extraction )]- Appendix C) |
- |
0 |
|
CHARGES INCLUDED IN LEAD 1ST EXTRACTION |
| Cl. 6.3(Effect on Water [Dialkyl tin C4, and higher homologues, measured as tin ( third extraction )]- Appendix C) |
- |
0 |
|
CHARGES INCLUDED IN LEAD 1ST EXTRACTION |
| Cl. 6.3(Effect on Water [Other toxic substances ( third extraction )]- Appendix C) |
- |
0 |
|
CHARGES INCLUDED IN LEAD 1ST EXTRACTION |
| Cl. 6.4(Short-Term Hydraulic Test- Appendix D) |
- |
1350 |
|
NIL |
| Cl. 6.2(Opacity- Appendix B) |
- |
700 |
|
NIL |
|
06 Jun, 2027 |
-
Testing charges has been fixed for two years w.e.f. 30-05-2019 to 29-05-2021. |
| 8814 |
CIPET, Vijayawada
| 6141334
| IS 2508 (2016) |
Polyethylene films and sheets - Specification (Third Revision) |
NATURAL & BLACK COMPOUNDED , TYPE 1 TO 4 |
22675 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1.1(Appearance) |
- |
500 |
|
NIL |
| 5.1.2(Film Form) |
- |
0 |
|
NIL |
| 5.1.3(Odour) |
- |
0 |
|
NIL |
| 5.1.4(Density, Cl.5 of IS 13360(Part-3/Section-1)) |
- |
700 |
|
NIL |
| 5.1.5(Melt Flow Index. Cl 6, 7 of IS 13360(Part-4/Section-1)) |
- |
1100 |
|
NIL |
| 5.1.6a(Carbon Black Content, Annex-A) |
- |
925 |
|
NIL |
| 5.1.6b(Ash Content, Annex-A) |
- |
1200 |
|
NIL |
| 5.1.6c(Carbon Black Dispersion, Cl.16 of IS 2530) |
- |
700 |
|
NIL |
| 5.2.2(Tolerance on Thickness, Annex-A) |
- |
500 |
|
CHARGE FOR DIMENSION |
| 6.1, Table 1(Tensile strength at break. A) Machine Direction. IS 13360 (Part 5/Sec 1)) |
- |
1800 |
|
NIL |
| 6.1, Table 1(Tensile strength at break. B) Transverse Direction. IS 13360 (Part 5/Sec 3)) |
- |
1300 |
|
NIL |
| 6.1, Table 1(Ageing test at (70-1)c for 7 days , cl 4 IS 7016 ) |
- |
4200 |
|
NIL |
| 6.1, Table 1(Elongation at break ,A) Machine direction .IS 13360(Part-5/sec-1) ) |
- |
0 |
|
CHARGES INCLUDED IN TENSILE STRENGTH |
| 6.1, Table 1(Elongation at break ,B) Cross-machine direction..IS 13360(Part-5/sec-3) ) |
- |
0 |
|
CHARGES INCLUDED IN TENSILE STRENGTH |
| 6.1, Table 1(Dartimpact strength Method B of IS 13360 (Part-5/sec-6) ) |
- |
850 |
|
NIL |
| 6.1, Table 1(Tear resistence. A) Machine direction Annex B) |
- |
1600 |
|
NIL |
| 6.1, Table 1(Tear resistence. B) Transverse direction ) |
- |
1100 |
|
NIL |
| 7.1. Table 2(Tensile strength at break A) Machine direction IS 13360 (Part-5/sec-1) ) |
- |
1300 |
|
NIL |
| 7.1. Table 2(Tensile strength at break,B) Crosse machine direction IS 13360 (Part-5/sec-3) ) |
- |
1300 |
|
NIL |
| 7.1. Table 2(Ageing test at (70-1)c for 7 days , cl 4 IS 7016 ) |
- |
0 |
|
NIL |
| 7.1. Table 2(Elongation at break , A) Machine direction IS 13360 (Part-5/sec-3) IS 13360 (Part-5/sec-1) ) |
- |
0 |
|
CHARGES INCLUDED IN TENSILE STRENGTH |
| 7.1. Table 2(Elongation at break , A) Transverse direction IS 13360 (Part-5/sec-3) ) |
- |
0 |
|
CHARGES INCLUDED IN TENSILE STRENGTH |
| 7.1. Table 2(Dart impact strenght , Method A of IS 3360 (Part-5/sec-6) ) |
- |
0 |
|
NIL |
| 8.1, Table 3(Tensile properties ,A) Yield strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do) |
- |
1800 |
|
NIL |
| 8.1, Table 3(Tensile properties , B) Break strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do) |
- |
1800 |
|
NIL |
| 8.1, Table 3(Tensile properties ,C) Yield elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do) |
- |
0 |
|
CHARGES INCLUDED IN TENSILE STRENGTH |
| 8.1, Table 3(Tensile properties ,D) Break elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do) |
- |
0 |
|
CHARGES INCLUDED IN TENSILE STRENGTH |
| 8.1, Table 3(Tear resistance , Annex B) |
- |
0 |
|
NIL |
| 8.1, Table 3(Puncture resistance , Annex C) |
- |
0 |
|
NIL |
| 9.1, Table 4(Tensile properties ,A) Yield strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do) |
- |
0 |
|
NIL |
| 9.1, Table 4(Tensile properties , B) Break strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do) |
- |
0 |
|
NIL |
| 9.1, Table 4(Tensile properties ,C) Yield elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do) |
- |
0 |
|
CHARGES INCLUDED IN TENSILE STRENGTH |
| 9.1, Table 4(Tensile properties ,D) Break elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do) |
- |
0 |
|
CHARGES INCLUDED IN TENSILE STRENGTH |
| 9.1, Table 4(Tear resistance , Annex B) |
- |
0 |
|
NIL |
| 9.1, Table 4(Puncture resistance , Annex C) |
- |
0 |
|
NIL |
|
06 Jun, 2027 |
-
Included w.e.f. 02.08.2018. Testing charges has been fixed for two years w.e.f. 30-05-2019 to 29-05-2021. |
| 8815 |
CIPET, Vijayawada
| 6141334
| IS 4985 (2021) |
UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES SPECIFICATION Fourth Revision |
SIZE: 20MM TO 630MM, CLASS: 1 TO 6 |
27450 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 11.2(Resistance to External Blows at 0°C) |
- |
1500 |
|
FOR ELASTOMERIC SEALING RING SOCKETS |
| 11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes) |
- |
850 |
|
FOR ELASTOMERIC SEALING RING SOCKETS |
| 11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring
Sockets) |
- |
850 |
|
FOR ELASTOMERIC SEALING RING SOCKETS |
| 11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring
Sockets) |
- |
11000 |
|
FOR ELASTOMERIC SEALING RING SOCKETS |
| 11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)) |
- |
850 |
|
FOR ELASTOMERIC SEALING RING SOCKETS |
| 11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)) |
- |
5000 |
|
FOR ELASTOMERIC SEALING RING SOCKETS |
| 10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density) |
- |
700 |
|
FOR ELASTOMERIC SEALING RING SOCKETS |
| 10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature) |
- |
1100 |
|
FOR ELASTOMERIC SEALING RING SOCKETS |
| 10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test) |
- |
1200 |
|
FOR ELASTOMERIC SEALING RING SOCKETS |
| 10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity) |
- |
700 |
|
FOR ELASTOMERIC SEALING RING SOCKETS |
| 10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance) |
- |
500 |
|
FOR ELASTOMERIC SEALING RING SOCKETS |
| 9.1(PIPE ENDS) |
- |
500 |
|
FOR ELASTOMERIC SEALING RING SOCKETS
CHARGE IS INCLUDED IN VISUAL APPEARANCE |
| 7.2.1.2-Table 4(DIMENSIONS-Sockets for elastomeric sealing ring joints-Socket inner Diameter) |
- |
500 |
|
FOR ELASTOMERIC SEALING RING SOCKETS |
| 7.2.1.2(a)-Table 5(DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement) |
- |
500 |
|
FOR ELASTOMERIC SEALING RING SOCKETS
RS. 500 INCLUDES ALL DIMENSIONAL PARAMETERS |
| 7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum)) |
- |
0 |
|
FOR ELASTOMERIC SEALING RING SOCKETS
RS. 500 INCLUDES ALL DIMENSIONAL PARAMETERS |
| 7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum)) |
- |
0 |
|
FOR ELASTOMERIC SEALING RING SOCKETS
RS. 500 INCLUDES ALL DIMENSIONAL PARAMETERS |
| 7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length) |
- |
0 |
|
FOR ELASTOMERIC SEALING RING SOCKETS
RS. 500 INCLUDES ALL DIMENSIONAL PARAMETERS |
| 7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum)) |
- |
0 |
|
FOR ELASTOMERIC SEALING RING SOCKETS
RS. 500 INCLUDES ALL DIMENSIONAL PARAMETERS |
| 7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum)) |
- |
0 |
|
FOR ELASTOMERIC SEALING RING SOCKETS
RS. 500 INCLUDES ALL DIMENSIONAL PARAMETERS |
| 7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum)) |
- |
500 |
|
FOR ELASTOMERIC SEALING RING SOCKETS
RS. 500 INCLUDES ALL DIMENSIONAL PARAMETERS |
| 7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum)) |
- |
0 |
|
FOR ELASTOMERIC SEALING RING SOCKETS
RS. 500 INCLUDES ALL DIMENSIONAL PARAMETERS |
| 7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum)) |
- |
0 |
|
FOR ELASTOMERIC SEALING RING SOCKETS
RS. 500 INCLUDES ALL DIMENSIONAL PARAMETERS |
| 7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum)) |
- |
0 |
|
FOR ELASTOMERIC SEALING RING SOCKETS
RS. 500 INCLUDES ALL DIMENSIONAL PARAMETERS |
| 7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum)) |
- |
0 |
|
FOR ELASTOMERIC SEALING RING SOCKETS
RS. 500 INCLUDES ALL DIMENSIONAL PARAMETERS |
| Clause 10.7(Sulphated Ash Content) |
- |
1200 |
|
FOR ELASTOMERIC SEALING RING SOCKETS |
| 11.2(Resistance to External Blows at 0°C) |
- |
0 |
|
Resistance to External Blows at 0°C |
| 11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)) |
- |
0 |
|
MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test) |
| 11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets) |
- |
0 |
|
MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets |
| 11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)) |
- |
0 |
|
MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test) |
| 11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets) |
- |
0 |
|
MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test) |
| 10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance) |
- |
0 |
|
PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance |
| 10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature) |
- |
0 |
|
Vicat Softening Temperature |
| 10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test) |
- |
0 |
|
Reversion Test |
| 10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity) |
- |
0 |
|
Opacity |
| 10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance) |
- |
0 |
|
Visual Appearance |
| 9.1(PIPE ENDS) |
- |
0 |
|
PIPE ENDS |
| 7.2.1.2(a)-Table 5(DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement) |
- |
0 |
|
Minimum depth of engagement |
| 7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length) |
- |
0 |
|
Minimum Length |
| 7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum)) |
- |
0 |
|
Diameter at mid point of the socket length (Minimum) |
| 7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum)) |
- |
0 |
|
PIPE-Thickness(Minimum) |
| 7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum)) |
- |
0 |
|
-PIPE-Thickness(Maximum) |
| 7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum)) |
- |
0 |
|
Ovality (Maximum) |
| 7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum)) |
- |
0 |
|
O.D. at any Point (Minimum) |
| 7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum)) |
- |
0 |
|
O.D. at any Point (Maximum) |
| 7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum)) |
- |
0 |
|
Mean O.D. (Minimum) |
| 7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum)) |
- |
0 |
|
Mean O.D. (Mamimum) |
| 10.7(Sulphated Ash Content) |
- |
0 |
|
Sulphated Ash Content |
| 10.1(Colour) |
- |
0 |
|
Colour |
| 6.1.2(PVC Resin) |
- |
0 |
|
Nil |
|
06 Jun, 2027 |
-
REVISED VERSION OF IS 4985:2021 INCLUDED W.E.F. 4-8-2021.. |
| 8816 |
CIPET, Vijayawada
| 6141334
| IS 4984 (2016) |
Polyethylene pipes for water supply - Specification (Fifth Revision) |
SDR 41 to 6, DN 16 to 1200 mm, PE 63/80/100, PN 2 to20 |
55650 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 8.10(Slow Crack Growth Rate) |
- |
6000 |
|
INCLUDES SPECIMEN CHARGE |
| 8.9 table-6(Elongation at Break) |
- |
1800 |
|
INCLUDES SPECIMEN CHARGE |
| 8.8(Tensile Strength for Butt-fusion) |
- |
1800 |
|
INCLUDES SPECIMEN CHARGE |
| 8.7(Density) |
- |
700 |
|
NIL |
| 8.5Â (Oxidation Induction Time) |
- |
2200 |
|
NIL |
| 8.4(Â Â Melt Flow Rate) |
- |
1100 |
|
NIL |
| 8.2(Longitudinal Reversion Test) |
- |
1200 |
|
INCLUDES SPECIMEN CHARGE |
| 8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints) |
- |
1600 |
|
NIL |
| 8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe) |
- |
21900 |
|
INCLUDES ALL TESTS |
| 7.4.1.2(Ovality) |
- |
0 |
|
INCLUDES IN DIMENSION |
| Cl-7.4(Mean Outside Diameter (For upto 50 mm take 8 reading, above 50mm take 6 reading & average will be reported)) |
- |
500 |
|
INCLUDES ALL DIMENSIONAL MEASUREMENTS |
| 7.2(Length) |
- |
0 |
|
INCLUDES IN DIMENSION |
| 6.2.1(6.1.1Â Â Â Identification Stripes) |
- |
500 |
|
NIL |
| 8.6(Overall migration) |
- |
2200 |
|
INCLUDES SPECIMEN CHARGES |
| 8.3(Carbon black) |
- |
1625 |
|
INCLUDES CARBON BLACK DISPERSION TEST |
| 5.3(e)(Carbon Black Master Batch) |
- |
5450 |
|
INCLUDES ALL TEST FOR CARBON BLACK POWDER |
| 5.3(d)(Carbon Black Master Batch) |
- |
950 |
|
NIL |
| 5.3(c)(Carbon Black Master Batch) |
- |
925 |
|
NIL |
| 5.2(Polyethylene Resin) |
- |
5200 |
|
INCLUDES ALL TEST CHARGES FOR RAW MATERIAL |
|
06 Jun, 2027 |
-
EVISED VERSION INCLUDED OF IS 4984:2016. |
| 8817 |
Bee Pharmo Labs Pvt. Ltd., Thane
| 7139416
| IS 17782 (2021) |
FORTIFIED RICE KERNELS-SPECIFICATION |
- |
32900 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1(Description) |
- |
200 |
|
-- |
| 4.1.1(length, breadth, and thickness) |
- |
600 |
|
-- |
| 4.1.2(length, breadth, thickness, thousand kernel weight, and true density) |
- |
700 |
|
-- |
| 4.1.6(ree from added colouring matter, metal peices and other impurities) |
- |
400 |
|
-- |
| 4.3(Pesticides/insecticides residues, poisonous metals, naturally occurring toxic substances and other contaminant Aflatoxins) |
- |
12500 |
|
Pesticides, Metal contaminants, Melamine, Aflatoxins |
| Table-1, (4.1.3, 4.1.5 and 8)(i) Iron, mg/100 g) |
- |
500 |
|
-- |
| Table-1, (4.1.3, 4.1.5 and 8)(ii) Folic acid, μg/100 g) |
- |
1500 |
|
-- |
| Table-1, (4.1.3, 4.1.5 and 8)(iii) Vitamin B12, μg/100 g) |
- |
1500 |
|
-- |
| Table-2, 4.1.4, 4.1.5 and 8(i) Zinc, mg/100 g) |
- |
500 |
|
-- |
| Table-2, 4.1.4, 4.1.5 and 8(ii) Vitamin A, μg/100 g) |
- |
1000 |
|
-- |
| Table-2, 4.1.4, 4.1.5 and 8(iii) Thiamine) |
- |
1000 |
|
-- |
| Table-2, 4.1.4, 4.1.5 and 8(iv) Riboflavin (Vitamin B2), mg/100 g) |
- |
1000 |
|
-- |
| Table-2, 4.1.4, 4.1.5 and 8(v) Niacin (Vitamin B3), mg/100 g) |
- |
1000 |
|
-- |
| Table-2, 4.1.4, 4.1.5 and 8(vi) Pyridoxine (Vitamin B6), mg/100 g) |
- |
1500 |
|
-- |
| Table-3, 4.1.6 and 8(i) Moisture content,) |
- |
350 |
|
-- |
| Table-3, 4.1.6 and 8(ii) Broken fortified rice kernels,) |
- |
200 |
|
-- |
| Table-3, 4.1.6 and 8(iii) Foreign matter,) |
- |
200 |
|
-- |
| Table-3, 4.1.6 and 8(iv) Damaged grains) |
- |
200 |
|
-- |
| Table-3, 4.1.6 and 8(v) Discolored grains) |
- |
200 |
|
-- |
| Table-3, 4.1.6 and 8(vi) Chalky grains) |
- |
200 |
|
-- |
| Table-3, 4.1.6 and 8(vii) Admixture) |
- |
200 |
|
-- |
| 4.5.1(Percent solid loss) |
- |
500 |
|
-- |
| 4.5.2(Cooking time) |
- |
1000 |
|
-- |
| 4.5.4(iron, folic acid, vitamin B12) |
- |
4000 |
|
-- |
| Table-4, 4.7 and 8(i) Total plate count,) |
- |
650 |
|
-- |
| Table-4, 4.7 and 8(ii) Yeasts and moulds,) |
- |
650 |
|
-- |
| Table-4, 4.7 and 8(iii) Coliform count,) |
- |
650 |
|
-- |
|
15 Mar, 2027 |
-
Exclusion: Cl.4.5.3 (Texture of the cooked fortified rice) |
| 8818 |
Bee Pharmo Labs Pvt. Ltd., Thane
| 7139416
| IS 17780 (2021) |
FORTIFIED RICE-SPECIFICATION |
- |
26050 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1(Description) |
- |
200 |
|
-- |
| 4.1.1(blend of fortified rice kernels and polished raw Rice ratio) |
- |
500 |
|
-- |
| 4.1.5(5 Fortified rice shall be free from added colouring
matter, foreign matter, metal pieces, mold, weevils,
obnoxious substances, discolouration, poisonous seeds,
rodent hair, excreta) |
- |
400 |
|
-- |
| 4.2(Pesticides/insecticides residues, poisonous
metals, naturally occurring toxic substances and other
contaminants (if any) in fortified rice shall not exceed
the limit as prescribed in the Food Safety and Standards
(Contaminants, Toxins and Residues) Regulations,
2011) |
- |
11500 |
|
Pesticides, Metal Contaminants, Melamine |
| 4.1.2 4.1.5 and 8.1(i) Moisture content, percent by mass, Max) |
- |
350 |
|
-- |
| 4.1.2 4.1.5 and 8.1(Foreign matter1)
(a) Inorganic, percent by mass, Max) |
- |
200 |
|
-- |
| 4.1.2 4.1.5 and 8.1(Foreign matter1)
(b) Organic, percent by mass, Max) |
- |
200 |
|
-- |
| 4.1.2 4.1.5 and 8.1(iii) Weevilled kernels, percent by mass, Max) |
- |
200 |
|
-- |
| 4.1.2 4.1.5 and 8.1(iv) Heat – Damaged Kernels , percent by mass, Max) |
- |
200 |
|
-- |
| 4.1.2 4.1.5 and 8.1(v) Damaged Kernels, percent by mass, Max) |
- |
200 |
|
-- |
| 4.1.2 4.1.5 and 8.1(vi) Kernels with pin point, percent by mass, Max) |
- |
200 |
|
-- |
| 4.1.2 4.1.5 and 8.1(vii) Immature Kernels, percent by mass, Max) |
- |
200 |
|
-- |
| 4.1.2 4.1.5 and 8.1(viii) Chalky Kernels, percent by mass, Max) |
- |
200 |
|
-- |
| 4.1.2 4.1.5 and 8.1(ix) Uric acid, mg/kg, Max) |
- |
800 |
|
-- |
| 4.1.2 4.1.5 and 8.1(x) Aflatoxin B1, µg/kg, Max) |
- |
1000 |
|
-- |
| 4.1.3 and 8.1(i) Iron, mg/kg) |
- |
500 |
|
-- |
| 4.1.3 and 8.1(ii) Folic acid, µg/kg) |
- |
1500 |
|
-- |
| 4.1.3 and 8.1(iii) Vitamin B12, µg/kg) |
- |
1500 |
|
-- |
| 4.4 and 8.1(i) Zinc, mg/kg) |
- |
500 |
|
-- |
| 4.4 and 8.1(ii) Vitamin A, µg/kg) |
- |
1000 |
|
-- |
| 4.4 and 8.1(iv) Thiamine (vitamin B1), mg/kg) |
- |
1000 |
|
-- |
| 4.4 and 8.1(v) Riboflavin (vitamin B2), mg/kg) |
- |
1000 |
|
-- |
| 4.4 and 8.1(vi) Niacin (vitamin B3), mg/kg) |
- |
1000 |
|
-- |
| 4.4 and 8.1(vii) Pyridoxine (vitamin B6), mg/kg) |
- |
1500 |
|
-- |
| 4.1.4(Fortified rice kernels shall be uniformly distributed
in fortified rice.) |
- |
200 |
|
-- |
|
15 Mar, 2027 |
-
- |
| 8819 |
Bee Pharmo Labs Pvt. Ltd., Thane
| 7139416
| IS 1155 (2022) |
ATTA - SPECIFICATION(THIRD REVISION OF IS 1155) |
- |
15000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1(Description- IS 1155) |
- |
200 |
|
- |
| 4.2(Microscopic Appearance -IS 1155) |
- |
200 |
|
- |
| 4.4,Table 1 (i)(Moisture - IS 1155) |
- |
350 |
|
- |
| 4.4,Table 1 (ii)(Total Ash (On dry basis ) - IS 1155) |
- |
350 |
|
- |
| 4.4,Table 1 (iii)("Acid Insoluble Ash (On Dry basis) - IS 1155
") |
- |
350 |
|
- |
| 4.4,Table 1 (iv)(Gluten (On dry basis) - IS 1155) |
- |
350 |
|
- |
| 4.4,Table 1 (v)(Crude Fibre (On dry basis) - IS 1155) |
- |
400 |
|
- |
| 4.4,Table 1 (vi)(Alcoholic Acidity (as H2SO4 ) in 90 % alcohol - IS 1155) |
- |
350 |
|
- |
| 4.4,Table 1 (vii)(Granularity - IS 1155) |
- |
200 |
|
- |
| 4.4,Table 1 (viii)(Uric acid - IS 1155) |
- |
350 |
|
- |
| 4.6(2,4-Dichlorophenoxy Acetic acid) |
- |
5400 |
|
All pesticide residues |
| 4.6(Azoxystrobin) |
- |
0 |
|
- |
| 4.6(Sum of benomyl & carbendazim expressed as carbendazim)) |
- |
0 |
|
- |
| 4.6(carbendazim) |
- |
0 |
|
- |
| 4.6(Bitertanol) |
- |
0 |
|
- |
| 4.6(Carbaryl) |
- |
0 |
|
- |
| 4.6(Carbofuran (sum of carbofuran & 3-hydroxy carbofuran expressedas carbofuran)) |
- |
0 |
|
- |
| 4.6(Carfentrazone ethyl) |
- |
0 |
|
- |
| 4.6(Chlorimuron ethyl) |
- |
0 |
|
- |
| 4.6(Chlorpyriphos) |
- |
0 |
|
- |
| 4.6(Clodinafop-propargyl) |
- |
0 |
|
- |
| 4.6(Cypermethrin (sum of isomers) (Fat soluble residue)) |
- |
0 |
|
- |
| 4.6(Deltamethrin (Decamethrin)) |
- |
0 |
|
- |
| 4.6(Dichlorvos (DDVP) (content of dichloroacetaldehyde (D.C.A.)) |
- |
0 |
|
- |
| 4.6(Diclofop (sum diclofop-methyl & diclofop acid expressed as diclofop-methyl)) |
- |
0 |
|
- |
| 4.6(Difenoconazole) |
- |
0 |
|
- |
| 4.6(Dithiocarbamates(the residue tolerance limit are determined and expressed as mg/CS2/kg and refer separately to the residues arising from any or each group of dithiocarbamates)) |
- |
0 |
|
- |
| 4.6(Epoxyconazole) |
- |
0 |
|
- |
| 4.6(Ethion (Residues to be determined as ethion & its oxygen analogue and expressed as ethion)) |
- |
0 |
|
- |
| 4.6(Fenoxaprop-p-ethyl) |
- |
0 |
|
- |
| 4.6(Fipronil) |
- |
0 |
|
- |
| 4.6(Iodosulfuron Methyl Sodium) |
- |
0 |
|
- |
| 4.6(Isoproturon) |
- |
0 |
|
- |
| 4.6(Kresoxim Methyl) |
- |
0 |
|
- |
| 4.6(Malathion (Malathion to be determined & expressed as combined residues of malathion and malaoxon)) |
- |
0 |
|
- |
| 4.6(Mesosulfuron Methyl) |
- |
0 |
|
- |
| 4.6(Methabenzthiazuron) |
- |
0 |
|
- |
| 4.6(Methyl Chlorophenoxy Acetic Acid (MCPA)) |
- |
0 |
|
- |
| 4.6(Metribuzin) |
- |
0 |
|
- |
| 4.6(Metsulfuron Methyl) |
- |
0 |
|
- |
| 4.6(Monocrotophos) |
- |
0 |
|
- |
| 4.6(Oxydemeton-Methyl) |
- |
0 |
|
- |
| 4.6(Paraquat dichloride (Determined as Paraquatcations)) |
- |
0 |
|
- |
| 4.6(Pendimethalin) |
- |
0 |
|
- |
| 4.6(Phenthoate) |
- |
0 |
|
- |
| 4.6(Phorate (sum of Phorates,its oxygen analogue and their sulphoxides & sulphones,expressed as phorate)) |
- |
0 |
|
- |
| 4.6(Picoxystrobin) |
- |
0 |
|
- |
| 4.6(Pinoxaden) |
- |
0 |
|
- |
| 4.6(Primiphos-methyl) |
- |
0 |
|
- |
| 4.6(Propiconazole) |
- |
0 |
|
- |
| 4.6(Pyraclostrobin) |
- |
0 |
|
- |
| 4.6(Sulfosulfuron) |
- |
0 |
|
- |
| 4.6(Thiomethoxam) |
- |
0 |
|
- |
| 4.6(Thiometon (Residues determined as thiometon its sulfoxide & sulphone expressed as thiometon)) |
- |
0 |
|
- |
| 4.6(Thiophanate-Methyl) |
- |
0 |
|
- |
| 4.6(Trichlorfon) |
- |
0 |
|
- |
| 4.6(Triadimefon) |
- |
0 |
|
- |
| 4.6(Trifloxystrobin) |
- |
0 |
|
- |
| 4.6(Triallate) |
- |
0 |
|
- |
| 4.6(Triasulfuron) |
- |
0 |
|
- |
| 4.6(Tridemorph) |
- |
0 |
|
- |
| 4.6(Trifluralin) |
- |
0 |
|
- |
| 4.6(Lead) |
- |
500 |
|
- |
| 4.6(Copper) |
- |
500 |
|
- |
| 4.6(Arsenic) |
- |
500 |
|
- |
| 4.6(Tin) |
- |
500 |
|
- |
| 4.6(Cadmium) |
- |
500 |
|
- |
| 4.6(Mercury) |
- |
500 |
|
- |
| 4.6(Methyl Mercury (Calculated as the element)) |
- |
500 |
|
- |
| 4.6(Total Aflatoxins) |
- |
1000 |
|
- |
| 4.6(Aflatoxin B1) |
- |
0 |
|
- |
| 4.6(Ochratoxin A) |
- |
1000 |
|
- |
| 4.6(Deoxynivalenol) |
- |
1000 |
|
- |
| 4.2(Microscopic Appearance -IS 1155) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.4,Table 1 (i)(Moisture - IS 1155) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.4,Table 1 (v)(Crude Fibre (On dry basis) - IS 1155) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.4,Table 1 (vii)(Granularity - IS 1155) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.4,Table 1 (viii)(Uric acid - IS 1155) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(carbendazim) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(Carbofuran (sum of carbofuran & 3-hydroxy carbofuran expressedas carbofuran)) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(Carfentrazone ethyl) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(Chlorimuron ethyl) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(Clodinafop-propargyl) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(Cypermethrin (sum of isomers) (Fat soluble residue)) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(Deltamethrin (Decamethrin)) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(Dichlorvos (DDVP) (content of dichloroacetaldehyde (D.C.A.)) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(Diclofop (sum diclofop-methyl & diclofop acid expressed as diclofop-methyl)) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(Difenoconazole) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(Dithiocarbamates(the residue tolerance limit are determined and expressed as mg/CS2/kg and refer separately to the residues arising from any or each group of dithiocarbamates)) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(Epoxyconazole) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(Ethion (Residues to be determined as ethion & its oxygen analogue and expressed as ethion)) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(Fenoxaprop-p-ethyl) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(Fipronil) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(Iodosulfuron Methyl Sodium) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(Isoproturon) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(Kresoxim Methyl) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(Malathion (Malathion to be determined & expressed as combined residues of malathion and malaoxon)) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(Mesosulfuron Methyl) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(Methabenzthiazuron) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(Methyl Chlorophenoxy Acetic Acid (MCPA)) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(Metribuzin) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(Metsulfuron Methyl) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(Monocrotophos) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(Oxydemeton-Methyl) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(Paraquat dichloride (Determined as Paraquatcations)) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(Pendimethalin) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(Phenthoate) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(Phorate (sum of Phorates,its oxygen analogue and their sulphoxides & sulphones,expressed as phorate)) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(Picoxystrobin) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(Pinoxaden) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(Primiphos-methyl) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(Propiconazole) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(Pyraclostrobin) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(Sulfosulfuron) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(Tebuconazole) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(Thiomethoxam) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(Thiometon (Residues determined as thiometon its sulfoxide & sulphone expressed as thiometon)) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(Thiophanate-Methyl) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(Trichlorfon) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(Triadimefon) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(Trifloxystrobin) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(Triallate) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(Triasulfuron) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(Tridemorph) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(Trifluralin) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(Lead) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(Copper) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(Arsenic) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(Tin) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(Cadmium) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(Mercury) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(Methyl Mercury (Calculated as the element)) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(Total Aflatoxins) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(Aflatoxin B1) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(Ochratoxin A) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(Deoxynivalenol) |
- |
0 |
|
Duplication of parameter in LIMS |
| 4.6(Tebuconazole) |
- |
0 |
|
Duplication of parameter in LIMS |
|
15 Mar, 2027 |
-
- |
| 8820 |
Bee Pharmo Labs Pvt. Ltd., Thane
| 7139416
| IS 14309 (1995) |
Blended edible vegetable oils specification |
- |
2500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Table-1(Moisture and volatile matter percent by mass, Max type1) |
- |
550 |
|
- |
| Table-1(Acid value, mx type 1) |
- |
550 |
|
- |
| Table-1(Unsaponifiable matter, percent by mass, MaX type1) |
- |
850 |
|
- |
| Table-1(Flash point, Pen&y-Martens type1) |
- |
550 |
|
- |
| Table-1(Moisture and volatile matter percent by mass, Max type2) |
- |
550 |
|
- |
| Table-1(Acid value, mx type2) |
- |
550 |
|
- |
| Table-1(Unsaponifiable matter, percent by mass, MaX type2) |
- |
850 |
|
- |
| Table-1(Flash point, Pen&y-Martens ,type 2) |
- |
550 |
|
- |
| Table-1(Moisture and volatile matter percent by mass, Max type 3) |
- |
550 |
|
- |
| Table-1(Acid value, mx type 3) |
- |
550 |
|
- |
| Table-1(Unsaponifiable matter, percent by mass, MaX type3) |
- |
850 |
|
- |
| Table-1(Flash point, Pen&y-Martens type3 ) |
- |
550 |
|
- |
|
15 Mar, 2027 |
-
- |
