BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15656 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

9631

CIPET, Hajipur

5118334

IS 16703 (2017)

Textiles - High density polyethylene (HDPE) polypropylene (PP) woven sacks for packaging of 25 kg polymer materials - Specification

38230 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Mass of Bale)	-	500	25% discount for BIS.
5.2 Table 1(Dimensions)	-	500	25% discount for BIS.
5.2 Table 1(Dimensions)	-	2900	Thickness of the Tape Width of the Tape Dimensional Stability (100 °C & 10 min.) Dimensional Stability (125 °C & 10 min.) Weight of fabric (unlaminated) 25% discount for BIS.
5.2 Table 1(Dimensions)	-	3150	Tape Width Mesh size Identification Melt flow rate (MFR) 25% discount for BIS.
5.2 Table 1(Dimensions)	-	2500	Linear Density of tape Tanacity & Elongation Density of tape Raw Material 25% discount for BIS.
5.2 Table 1(Ends per dm)	-	500	25% discount for BIS.
5.2 Table 1(Picks per dm)	-	500	25% discount for BIS.
5.2 Table 1(Mass of sack, Gusseted type, g - IS 1964)	-	1050	4.1 Raw Material identification Rs 1050 25% discount for BIS.
5.2 Table 1(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N) (kgf): - IS 1969 (Part 1))	-	2700	Avg. breaking strength of Fabric & Elongation Length wise & Width wise 25% discount for BIS.
5.2 Table 1(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N2) (kgf): - IS 1969 (Part 1))	-	1100	Minimum breaking strength of Bottom seam 25% discount for BIS.
5.2 Table 1(Breaking strength of bottom seam (Ravelled strip method), Min, N) (kgf) - IS 9030)	-	1600	Breaking Load of stitching thread 25% discount for BIS.
5.2 Table 1(Elongation at break of fabric (Ravelled strip method), percent : IS 1969 (Part 1))	-	2700	Breaking strength of fabric after 192 hrs of UV exposure length wise &Width wise 25% discount for BIS.
5.2 Table 1(Elongation at break of fabric (Ravelled strip method), percent : IS 1969 (Part 1))	-	0	Already Included
5.2 Table 1(Drop impact strength)	-	1600	25% discount for BIS.
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,a) For UV stabilized sacks)	-	1200	Ash content 25% discount for BIS.
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,b) For non- UV stabilized sacks)	-	0	25% discount for BIS.
4.6(Capacity)	-	500	Sacks 25% discount for BIS.
4.3.1(Bottom Seam)	-	1500	1. Snitches Separation (Min) 2. Outer stitches (Min) 3. Depth of seam over doubled fold (Min) 25% discount for BIS.
4.3(Sacks)	-	0	25% discount for BIS.
4.2,5.1,5.2,5.3,5.4(Breaking strenght after U.V. Exposure (Warp/Weft))	-	3550	Bottom Seam –No Stitches per dm Stitching thread (Material Identification) Presence of UV stabiliser in stitching thread 25% discount for BIS.
4.2,5.1,5.2,5.3,5.4,(UV Resistance (192 hrs)(100 x 65+92x40))	-	10180	Specimen Charge Breaking strength of fabric after 192 hrs of UV exposure[UV Resistance(192 hrs)*8 hour at 60°C Light cycle without condensation, 4 hour at 50°C Dark cycle with condensation,Irradiance 0.63 W/m2 (100 x 60 +92 x40)] 25% discount for BIS.
4.2(Linear Density)	-	0	25% discount for BIS.
4.2(Width of tape)	-	0	Already Included

07 Oct, 2028

-
Included w.e.f. 22.08.2024

9632

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 383 (2016)

Coarse and Fine Aggregate for Concrete - Specification (Third Revision)

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4.1 (a)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	500	-
5.4.1 (b)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	500	-
5.4.2(a)( Aggregates Impact Value)	-	500	-
5.4.2(b)( Aggregates Impact Value)	-	500	-
5.4.3(a)( Aggregate Abrasion Value)	-	500	-
5.4.3(b)( Aggregate Abrasion Value)	-	500	-
6.1-Table 7(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Nominal Size of aggregate)	-	500	-
6.1-Table 7(i)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 80 mm sieve )	-	500	-
6.1-Table 7(ii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 63 mm sieve )	-	500	-
6.1-Table 7(iii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 40 mm sieve )	-	0	-
6.1-Table 7(iv)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 20 mm sieve )	-	500	-
6.1-Table 7(v)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 16 mm sieve )	-	500	-
6.1-Table 7(vi)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 12.5 mm sieve )	-	500	-
6.1-Table 7(vii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 10 mm sieve )	-	500	-
6.1-Table 7(viii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 4.75 mm sieve )	-	500	-
6.1-Table 7(ix)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 2.36 mm sieve )	-	500	-
6.1.1-Table 8(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Class)	-	500	-
6.1.1-Table 8(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Size)	-	500	-
6.1.1-Table 8(i)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 160 mm Sieve)	-	500	-
6.1.1-Table 8(i)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 80 mm Sieve)	-	500	-
6.1.1-Table 8(ii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 80 mm Sieve)	-	500	-
6.1.1-Table 8(ii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 40 mm Sieve)	-	500	-
6.1.1-Table 8(iii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 40 mm Sieve)	-	500	-
6.1.1-Table 8(iii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 20 mm Sieve)	-	500	-
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 20 mm Sieve)	-	500	-
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 4.75 mm Sieve)	-	500	-
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 2.36 mm Sieve)	-	500	-
6.2-Table 7(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Nominal Size of aggregate)	-	500	-
6.2-Table 7(i)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 80 mm sieve)	-	500	-
6.2-Table 7(ii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 63 mm sieve)	-	500	-
6.2-Table 7(iii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 40 mm sieve)	-	500	-
6.2-Table 7(iv)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 20 mm sieve)	-	500	-
6.2-Table 7(v)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 16 mm sieve)	-	500	-
6.2-Table 7(vi)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 12.5 mm sieve)	-	500	-
6.2-Table 7(vii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 10 mm sieve)	-	500	-
6.2-Table 7(viii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 4.75 mm sieve)	-	500	-
6.2-Table 7(ix)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 2.36 mm sieve)	-	500	-
6.3-Table 9(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Grading Zone)	-	500	-
6.3-Table 9(i)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 10mm Sieve )	-	500	-
6.3-Table 9(ii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 4.75mm Sieve )	-	500	-
6.3-Table 9(iii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 2.36mm Sieve )	-	500	-
6.3-Table 9(iv)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 1.18mm Sieve )	-	500	-
6.3-Table 9(v)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 600µm Sieve )	-	500	-
6.3-Table 9(vi)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 300µm Sieve )	-	500	-
6.3-Table 9(vii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 150µm Sieve )	-	500	-
6.4-Table 10(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Nominal Size )	-	500	-
6.4-Table 10(i)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 80mm Sieve )	-	500	-
6.4-Table 10(ii)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 40mm Sieve )	-	500	-
6.4-Table 10(iii)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 20mm Sieve )	-	500	-
6.4-Table 10(iv)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 4.75mm Sieve )	-	500	-
6.4-Table 10(v)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 600µm Sieve )	-	500	-
6.4-Table 10(vi)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 150µm Sieve )	-	500	-
5.7-Table-3-(v) IS: 2386 (P-3)(specific gravity(fine aggregate))	-	500	-
5.7-Table-3-(Iv) IS: 2386 (P-3)(Water absorption (fine aggregate))	-	500	-
5.7-Table-3-(III) IS:14959 (P-2)(Water soluble chloride content (fine aggregate))	-	500	-
5.7-Table-3-(II) IS:4032(Total sulphate content (fine aggregate))	-	500	-
5.6-IS: 2386 (P-7)(Alkali Aggregate Reaction (fine aggregate))	-	500	-
5.5-IS: 2386 (P-5)(Soundness (fine aggregate))	-	500	-
5.2- TABLE-2- (Note-3) IS-2386 (P-2)(Mica content (fine aggregate))	-	500	-
5.2- TABLE-2- (Note-4) IS-2386 (P-2)(Effect of organic impurities on strength of mortar (fine aggregate))	-	500	-
5.2- TABLE-2- (Note-4) IS-2386 (P-2)(Effect of organic impurities on strength of mortar (fine aggregate))	-	500	-
5.2- TABLE-2- (Note-4) IS-2386 (P-2)(Organic impurities (fine aggregate))	-	500	-
5.2- TABLE-2- (vi) IS-2386 (P-2)(Total deleterious material (fine aggregate))	-	500	-
5.2- TABLE-2- (iii) IS-2386 (P-1)(Material fine aggregater than 75 micron (fine aggregate))	-	500	-
5.2- TABLE-2- (ii) IS-2386 (P-2)(Clay lumps (fine aggregate ))	-	500	-
5.2- TABLE-2- (i) IS-2386 (P-2)(Coal and Lignite (fine aggregate ))	-	500	-
5.7-Table-3-(v) IS: 2386 (P-3)(specific gravity(coarse aggregate))	-	500	-
5.7-Table-3-(Iv) IS: 2386 (P-3)(Water absorption (coarse aggregate))	-	500	-
5.7-Table-3-(III) BN EN: 1744(Water soluble chloride content (coarse aggregate))	-	500	-
5.7-Table-3-(II) BN EN: 1744(Total sulphate content (coarse aggregate))	-	500	-
5.6-IS: 2386 (P-7)(Alkali Aggregate Reaction (coarse aggregate))	-	500	-
5.5-IS: 2386 (P-5)(Soundness (coarse aggregate))	-	500	-
5.3-IS: 2386 (P-1)(Combined elongation & flakiness index (coarse aggregate))	-	500	-
5.2- TABLE-2- (vi) IS-2386 (P-2)(Total deleterious material (coarse aggregate))	-	500	-
5.2- TABLE-2- (iv) IS-2386 (P-2)(Soft fragments (coarse aggregate))	-	500	-
5.2- TABLE-2- (iii) IS-2386 (P-1)(Material fine aggregater than 75 micron (coarse aggregate))	-	500	-
5.2- TABLE-2- (ii) IS-2386 (P-2)(Clay lumps (coarse aggregate ))	-	500	-
5.2- TABLE-2- (i) IS-2386 (P-2)(Coal and Lignite (coarse aggregate ))	-	500	-
5.5(Soundness By Magnesium Sulphate)	-	500	-
7.2(Moisture Content)	-	500	-
7.2(Bulking Of Fine Aggregate)	-	500	-
7.2(Bulk Density loose)	-	500	-
7.2(Bulk Density Rodded)	-	500	-
5.5(Soundness By Magnesium Sulphate)	-	500	-
7.2(Moisture Content)	-	500	-
7.2(Bulk Density loose)	-	500	-
7.2(Bulk Density Rodded)	-	500	-
5.3(Elongation Index)	-	500	-
5.3(Flakiness Index)	-	500	-
5.6(Alkali Agregate Reaction )	-	500	-
5.7 table 3(WaterAbsorption)	-	500	-
5.7 table 3(Specific Gravity)	-	500	-
5.3(Flakiness & Elongation)	-	500	-
5.5 Na2so4/5.5.1 Maso4/5.5.1 (Soundness)	-	500	-
5.5 Na2so4/5.5.1 Maso4/5.5.1 (Soundness)	-	500	-
5.2 (5.2.2, 5.2.1, 5.2.3, shale table-2 ) (Deleterious material (Clay lumps, coal & lignite, material finer than 75 micron IS sieve, Soft fragments,shale))	-	500	-
Clause 5.7- Table 3 (i) (TotalAlkali content as Na2O equivalent )	-	500	-
Clause 5.6(Nature of Aggregate)	-	500	-
Clause 5.6(Dissolved Silica)	-	500	-
Clause 5.6(Reduction in Alkalinity)	-	500	-
Clause 5.1(General)	-	500	-
Clause 5.1(General)	-	500	-

-
Only for aggregates from natural sources

9633

CIPET, Hajipur

5118334

IS 16709 (2017)

Textiles - Polypropylene (PP) woven, laminated, block bottom valve sacks for packaging of 50 kg cement - Specification

24150 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(Sack Length)	-	500	25% Discount for BIS.
4.1.2(Sack Width)	-	0	25% Discount for BIS.
4.1.3(Top Closure Width and Bottom Closure Width)	-	500	Fabric Construction.25% Discount for BIS.
4.1.4(Patch Length)	-	0	-
4.1.5(Patch Height)	-	0	-
4.1.6(Length of Valve)	-	2150	Identification (Chemical Analysis) Melt flow rate (MFR) 25% Discount for BIS.
4.1.7(Width of Valve Sleeve)	-	1100	Tanacity Elongation of the Tape 25% Discount for BIS.
4.1.8(Length of Valve Sleeve)	-	1500	Sacks Construction Construction of top & bottom closures Filling valves construction 25% Discount for BIS.
5.1(Raw Material)	-	1050	25% Discount for BIS.
5.2(Fabric)	-	2400	Thickness of the Tape Width of the Tape Dimensional Stability (100 °C & 10 min.) Dimensional Stability (125 °C & 10 min.) 25% Discount for BIS.
5.2(Tape density and width)	-	700	Linear Density.25% Discount for BIS.
5.4(Lamination for PP)	-	1550	mass of lamination film & Material Identification of lamination .25% Discount for BIS.
5.4(Lamination for LDPE)	-	1000	Total mass of laminated woven fabric& Overhung width. 25% Discount for BIS.
6.1(Mass of Bale)	-	500	25% Discount for BIS.
6.2.1(Breaking Strength and Elongation at Break of Fabric)	-	2700	Length Wise (Rs 1100) & Width Wise (Rs 1100) Specimen Preparation (Rs 500). 25% Discount for BIS.
6.2.2(Weld Strength of Top and Bottom Closures)	-	1100	25% Discount for BIS.
6.3(Drop Impact Testing of Filled Sacks)	-	1100	25% Discount for BIS.
6.4(Ash Content)	-	1200	25% Discount for BIS.
6.5(Air Permeability)	-	1100	25% Discount for BIS.
8(Atomspheric Conditions for Conditioning and Testing)	-	500	Perforation Construction.25% Discount for BIS.
Cl-5.6(Capacity)	-	500	25% Discount for BIS.
Cl- 6.6, Table.-1 (ii)(Ends per dm)	-	500	25% Discount for BIS.
Cl-6.6, Table-1 (iii)(Picks per dm)	-	500	25% Discount for BIS.
Cl.6.6, Table-1 (vii)(Elongation at break of fabric)	-	2000	Dimensions: Sack, Closure, Patch and Valve, in mm. 25% Discount for BIS.

07 Oct, 2028

-
Included w.e.f. 22.08.2024

9634

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 14261 (1995)

Transmission devices - V - Belts endless narrowv - Belts for industrial use - Specification

V - Belts

35500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4(Material And Workmanship)	-	5000	-
Cl 5.1(Cross-Section Dimensions)	-	13000	-
Cl 5.2(Cross-Section Dimensions)	-	13000	-
Cl 6(DESIGNATION)	-	1000	-
Cl 7(Length Measurement And Tolerances)	-	7500	-
Cl 7.2.1(Determination of Pitch Length)	-	5000	-
Cl 7.2.2(Determination of Pitch Length)	-	3500	-
Cl 7.2.3(Determination of Pitch Length)	-	0	-
Cl 7.3(Matched Belts)	-	0	-
Cl 4(Material And Workmanship)	-	0	-
Cl 5.1(Cross-Section Dimensions)	-	0	-
Cl 5.2(Cross-Section Dimensions)	-	0	-
Cl 6(DESIGNATION)	-	0	-
Cl 7(Length Measurement And Tolerances)	-	0	-
Cl 7.2.1(Determination of Pitch Length)	-	0	-
Cl 7.2.2(Determination of Pitch Length)	-	0	-
Cl 7.2.3(Determination of Pitch Length)	-	0	-
Cl 7.3(Matched Belts)	-	0	-
Cl 4(Material And Workmanship)	-	0	-
Cl 5.1(Cross-Section Dimensions)	-	0	-
Cl 5.2(Cross-Section Dimensions)	-	0	-
Cl 6(DESIGNATION)	-	0	-
Cl 7(Length Measurement And Tolerances)	-	0	-
Cl 7.2.1(Determination of Pitch Length)	-	0	-
Cl 7.2.2(Determination of Pitch Length)	-	0	-
Cl 7.2.3(Determination of Pitch Length)	-	0	-
Cl 7.3(Matched Belts)	-	0	-
Cl 4(Material And Workmanship)	-	0	-
Cl 5.1(Cross-Section Dimensions)	-	0	-
Cl 5.2(Cross-Section Dimensions)	-	0	-
Cl 6(DESIGNATION)	-	0	-
Cl 7(Length Measurement And Tolerances)	-	0	-
Cl 7.2.1(Determination of Pitch Length)	-	0	-
Cl 7.2.2(Determination of Pitch Length)	-	0	-
Cl 7.2.3(Determination of Pitch Length)	-	0	-
Cl 7.3(Matched Belts)	-	0	-

-
-

9635

BIS, Central Laboratory (CL)

None

IS 617 (2024)

Aluminium and Aluminium Alloys Ingots for Remelting and Castings for General Engineering Purposes â Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-6.1, Table-1 (Fe)	-
Cl-6.1, Table-1 (Cu)	-
Cl-6.1, Table-1 (Mn)	-
Cl-6.1, Table-1 (Mg)	-
Cl-6.1, Table-1 (Cr)	-
Cl-6.1, Table-1 (Ni)	-
Cl-6.1, Table-1 (Zn)	-
Cl-6.1, Table-1 (Pb)	-
Cl-6.1, Table-1 (Sn)	-
Cl-6.1, Table-1 (Ti)	-
Cl-6.1, Table-1 (Others elements Each)	-
Cl-6.1, Table-1 (Others elements Total)	-
Cl-6.1, Table-1 (Aluminium)	-
Cl-6.2 (The chemical analysis)	-
Cl. 6 (Silicon)	-
Cl. 6 (Silver)	-
Cl. 6 (Zirconium)	-
Cl. 6 (Titanium+Zirconium)	-
Cl. 6 (Antimony)	-
Cl. 6 (Cobalt)	-
Cl. 6 (Antimony+Cobalt)	-
Cl. 6 (Beryllium)	-
Cl-7.2 (Tensile Tests)	-
Cl-7.4 (Hardness)	-
Cl-8 (Freedom from Defects)	-

-
-

9636

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET), RANCHI

5173614

IS 16703 (2017)

Textiles - High density polyethylene (HDPE) polypropylene (PP) woven sacks for packaging of 25 kg polymer materials - Specification

25 KG POLYMER BAG

20555 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Linear Density)	-	700	For Fabric tape: (Extra charges) Material Identification: 1050/- Melt Flow Index: 1100/- Mesh Size:500/- Tenacity: 1100/- Density (Raw Material): 700/-
4.2(Width of tape)	-	500	Clause No: 4.2 Thickness of tape: 500/- Heat Shrinkage: 1700/- Dimensional Stability: 700/- (Each condition) GSM: 500 Clause No: 4.1 (Optional) Raw Material Identification: 1050/-
4.3(Sacks)	-	500	Visual
4.3.1(Bottom Seam)	-	500	Outer Stitching: 500/- Depth of seam over double fold: 500/- No of Stitches per dm: 500/- Identification of Stitching material: 1050/- Breaking load of thread: 1100/- (500/- for sample preparation) Presence of UV in Thread, 2000/-
4.6(Capacity)	-	500	Extra charges as per Standard Clause no: 4.4 (For Lamination) Identification of Lamination: 2000/- GSM: 500/- Lamination overhang: 500/- For Clause no: 4.5 Identification of Liner: 2000/- Dimensions of Liner: 500/- Visual of Liner: 500/-
5.2 Table 1(Dimensions)	-	500	Including Length, Width & Width of the gusset
5.2 Table 1(Dimensions)	-	0	-
5.2 Table 1(Ends per dm)	-	500	-
5.2 Table 1(Picks per dm)	-	500	-
5.2 Table 1(Mass of sack, Gusseted type, g - IS 1964)	-	500	-
5.2 Table 1(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N) (kgf): - IS 1969 (Part 1))	-	2700	2200/- Including Warp + Weft Direction (Avg. Breaking Strength + Elongation at break) and 500/- for Specimen preparation
5.2 Table 1(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N2) (kgf): - IS 1969 (Part 1))	-	0	-
5.2 Table 1(Breaking strength of bottom seam (Ravelled strip method), Min, N) (kgf) - IS 9030)	-	1100	-
5.2 Table 1(Elongation at break of fabric (Ravelled strip method), percent : IS 1969 (Part 1))	-	0	-
5.2 Table 1(Elongation at break of fabric (Ravelled strip method), percent : IS 1969 (Part 1))	-	0	-
5.2 Table 1(Drop impact strength)	-	1600	500 for sample preparation/Conditioning
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,a) For UV stabilized sacks)	-	1200	Ash Content
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,b) For non- UV stabilized sacks)	-	0	-
4.2,5.1,5.2,5.3,5.4(Breaking strenght after U.V. Exposure (Warp/Weft))	-	2700	2200/- Including Warp + Weft Direction (Avg. Breaking Strength ) and 500/- for Specimen preparation
4.2,5.1,5.2,5.3,5.4,(UV Resistance (192 hrs)(100 x 65+92x40))	-	10180	-
5.1(Mass of Bale)	-	0	-
5.2 Table 1(Dimensions)	-	0	-
5.2 Table 1(Dimensions)	-	0	-
4.2(Linear Density)	-	0	-
4.2(Width of tape)	-	0	-
4.3(Sacks)	-	0	-
4.3.1(Bottom Seam)	-	0	-
4.6(Capacity)	-	0	-
4.2,5.1,5.2,5.3,5.4(Breaking strenght after U.V. Exposure (Warp/Weft))	-	0	-
4.2,5.1,5.2,5.3,5.4,(UV Resistance (192 hrs)(100 x 65+92x40))	-	0	-

09 Aug, 2029

-
Included w.e.f. 09.09.2024

9637

Central Institute of Petrochemicals Engineering & Technology (CIPET), Chandrapur

7173804

IS 18482 (2023)

Textiles - Sandwich extrusion laminated polypropylene PP woven sacks for packaging bulk commodities - Specification

Type-I to Type-VII (5,10, 20, 25, 30, 40 & 50kg )

35980 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Sack Type)	-	500.0	GST Charges Extra
5.2.1(Fabric)	-	500.0	GST Charges Extra
5.2.2(Linear density of tapes)	-	700.0	GST Charges Extra
5.2.4(Unlaminated fabric mass)	-	500.0	GST Charges Extra
5.3.1.1.1(Mass of BOPP film in sandwich extrusion lamination)	-	500.0	GST Charges Extra
5.3.1.1.2(Polypropylene coating mass for sandwich extrusion lamination of BOPP film with base PP woven fabric)	-	500.0	GST Charges Extra
5.3.1.1.3(Total mass of BOPP film laminated woven fabric)	-	500.0	GST Charges Extra
5.3.1.2.1(Mass of nonwoven fabric in sandwich extrusion lamination)	-	500.0	GST Charges Extra
5.3.1.2.2(Polypropylene coating mass for sandwich extrusion lamination of non woven fabric with base PP woven fabric)	-	500.0	GST Charges Extra
5.3.1.2.3(The total mass of nonwoven laminated woven fabric)	-	500.0	GST Charges Extra
5.4.1(Sack)	-	500.0	GST Charges Extra
5.4.1.1(Centre seam)	-	500.0	GST Charges Extra
5.4.1.2(Bottom seam)	-	500.0	GST Charges Extra
5.4.2(Sack)	-	500.0	GST Charges Extra
5.4.3(Sack)	-	500.0	GST Charges Extra
5.4.5(Liner)	-	500.0	GST Charges Extra
6.1.1, Table 1(Inside length)	-	500.0	GST Charges Extra
6.1.1, Table 1(Inside width)	-	0.0	-
6.1.1, Table 1(Gusset width)	-	0.0	-
6.1.1, Table 1(Warp per dm)	-	500.0	GST Charges Extra
6.1.1, Table 1(Weft per dm)	-	500.0	GST Charges Extra
6.1.1, Table 1(Mass of laminated fabric)	-	500.0	GST Charges Extra
6.2, Table 1(Average breaking strength - Lengthwise)	-	1600.0	Breaking Strength 1100.0 + 500.0 Sample preparation charges)=1600 (GST Charges Extra)
6.2, Table 1(Average breaking strength - Widthwise)	-	1600.0	Breaking Strength 1100.0 + 500.0 Sample preparation charges)=1600 (GST Charges Extra)
6.2, Table 1(Breaking strength of bottom seam)	-	1600.0	Breaking Strength 1100.0 + 500.0 Sample preparation charges)=1600 (GST Charges Extra)
6.2, Table 1(Breaking strength of centre seam)	-	1600.0	Breaking Strength 1100.0 + 500.0 Sample preparation charges)=1600 (GST Charges Extra)
6.2, Table 1(Average elongation at break of fabric - Lengthwise)	-	0.0	-
6.2, Table 1(Average elongation at break of fabric - Widthwise)	-	0.0	-
6.3(Average breaking strength - Lengthwise after UV exposure)	-	11780.0	Breaking Strength 1100.0 + 500.0 Sample preparation charges) + 10180 (UV Exposure Charges)= (GST Charges Extra)
6.3(Average breaking strength - Widthwise after UV exposure)	-	1600.0	Breaking Strength 1100.0 + 500.0 Sample preparation charges)=1600 (GST Charges Extra)
6.4(Drop Impact Testing of Filled Sacks)	-	1600.0	Impact Test charges 1100.0 + 500.0 Sample preparation charges)=1600 (GST Charges Extra)
Clause 5.4.5.3("Free from pin holes (except for air removal perforations), patches, tears, blisters, and any other visible defects")	-	500.0	GST Charges Extra
Clause 6.2.2(Stitch strength)	-	1100.0	GST Charges Extra
Clause 6.2.2(Weld seam strength)	-	1600.0	Seam Strength 1100.0 + 500.0 Sample preparation charges)=1600 (GST Charges Extra)
Clause 5.4.5.3("Free from pin holes (except for air removal perforations), patches, tears, blisters, and any other visible defects")	-	0.0	-
Clause 6.2.2(Stitch strength)	-	0.0	-
Clause 6.2.2(Weld seam strength)	-	0.0	-
Clause 6.5 Table 1 viii(Ash content)	-	1200.0	GST Charges Extra

10 Sep, 2029

-
Included w.e.f. 20.08.2024

9638

BIS, Guwahati Branch Laboratory (GBL)

None

IS 723 (2023)

Steel Countersunk Head Wire Nails ï¿½ Specification ( Second Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Dimensions & tolerances (Except 120° angle))	-
4.2 (Bend of shank)	-
6 (Finish)	-
7 (Bend test)	-

-
Qty. required 40 Pcs nails

9639

CIPET, Madurai

6139834

IS 14885 (2022)

Polyethylene Pipes for the Supply of Gaseous Fuels ï¿½ Specification (First Revision)

16-355

402000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Grade of material)	-	500	25% Discount for BIS
4.3(Nominal Diameter)	-	500	25% Discount for BIS
4.4(Colour)	-	500	25% Discount for BIS
5.1(Polyethylene compound)	-	500	25% Discount for BIS
5.3(Anti-oxidant)	-	500	25% Discount for BIS
5.4(U-V stabilizer)	-	500	25% Discount for BIS
5.7(PE Compound Quality Evaluation)	-	400000	25% Discount for BIS
5.5(Effect of Gas condensate on the Hydrostatic strength)	-	1000	25% Discount for BIS Specimen Charges 4000
5.6(Resistance to Weathering)	-	14500	25% Discount for BIS Specimen Charges 1000
6.1(Mean out side Diameter (For less than or equal to 25 mm- Average of 8 , For higher diameters average of 6))	-	500	25% Discount for BIS
6.1(Out of Roundness (Ovality))	-	500	25% Discount for BIS
6.2(Wall thickness (Take 8 reading and Average will be repoted))	-	500	25% Discount for BIS
7(Finish)	-	500	25% Discount for BIS
8.1(Internal pressure creep rupture test for plain at 80 deg. C for 165h)	-	4800	25% Discount for BIS Specimen Charges 500
8.1(Internal pressure creep rupture test for plain pipes at 20 deg. C for 100h)	-	4000	25% Discount for BIS Specimen Charges 500
8.1(Internal pressure creep rupture test for plain pipes at 80 deg. C for 1000 h)	-	11000	25% Discount for BIS
8.2(Reversion Test)	-	700	25% Discount for BIS
8.3(Density)	-	700	25% Discount for BIS
8.6(Thermal Stability (Oxidation Induction Time))	-	2200	25% Discount for BIS
8.7(Volatile Matter Content)	-	700	25% Discount for BIS
8.8(Tensile Properties (Tensile Yield Strength and Elongation at Break))	-	700	25% Discount for BIS
8.9(Resistance to Weathering)	-	14500	25% Discount for BIS Specimen Charges 1000
6.4(Length of Pipe)	-	500	25% Discount for BIS
8.4(Melt Flow Rate (MFR))	-	1100	25% Discount for BIS
8.5(Pigment Dispersion)	-	700	25% Discount for BIS
8.10(Slow Crack Growth Rate Test)	-	11600	25% Discount for BIS Specimen Charges 500/- This Test Charges 8.10 Applicable for Wall thickness greater than 5 mm
8.11(Squeeze-off)	-	1300	25% Discount for BIS
5.1, 5.7 Table 2(i) Conventional density (of base polymer))	-	700	25% Discount for BIS
5.1, 5.7 Table 2(ii) Melt flow rate (MFR))	-	1100	25% Discount for BIS
5.1, 5.7 Table 2(iii) Thermal stability (oxidation induction time))	-	2200	25% Discount for BIS
5.1, 5.7 Table 2(iv) Volatile content)	-	700	25% Discount for BIS
5.1, 5.7 Table 2(v) Water content1))	-	700	25% Discount for BIS
5.1, 5.7 Table 2(vi) Pigment dispersion)	-	700	25% Discount for BIS
5.1, 5.7 Table 3(iv) Resistance to slow crack growth rate)	-	11600	25% Discount for BIS Specimen Charges 500/- This Test Charges 8.10 Applicable for Wall thickness greater than 5 mm
5.3(Anti-Oxidant)	-	500	25% Discount for BIS
5.4(U.V. Stabilizer)	-	2500	25% Discount for BIS
5.5(Effects of Gas Condensate on the Hydrostatic Strength)	-	1000	25% Discount for BIS Specimen Charges 4000/-
5.6(ii) Hydraulic characteristics)	-	19800	Type Test 50 Deg C For 100 hrs 4000 Type Test 80 Deg C For 1000 hrs 11000 Acceptance Test 80 Deg C For 165 hrs 4800 25% Discount for BIS Specimen Charges 1000/- 25% Discount for BIS
5.6(iii) Thermal stability (Oxidation induction time))	-	2200	25% Discount for BIS
6(Dimensions of pipes)	-	500	25% Discount for BIS
7(Finish)	-	500	25% Discount for BIS
8.1(Hydraulic Characteristics)	-	19800	Type Test 50 Deg C For 100 hrs 4000 Type Test 80 Deg C For 1000 hrs 11000 Acceptance Test 80 Deg C For 165 hrs 4800 25% Discount for BIS Specimen Charges 1000/-
8.2(Reversion test)	-	700	25% Discount for BIS
8.3(Density)	-	700	25% Discount for BIS
8.4(Melt Flow Rate)	-	1100	25% Discount for BIS
8.5(Pigment Dispersion)	-	700	25% Discount for BIS
8.6(Thermal Stability (Oxidation Induction Time))	-	2200	25% Discount for BIS
8.7(Volatile Matter Content)	-	700	25% Discount for BIS
8.9(Resistance to Weathering)	-	14500	25% Discount for BIS Specimen Charges 1000/-
8.8(Tensile Properties (Tensile Yield Strength and Elongation at Break))	-	1300	25% Discount for BIS Specimen Charges 500/-
8.10(Slow Crack Growth Rate Test)	-	11600	25% Discount for BIS Specimen Charges 500/- This Test Charges 8.10 Applicable for Wall thickness greater than 5 mm
8.11(Squeeze-of)	-	1300	25% Discount for BIS
10(Marking)	-	500	25% Discount for BIS

22 May, 2027

-
Included w.e.f. 20.08.2024

9640

CIPET, Madurai

6139834

IS 14735 (1999)

Unplasticized Polyvinyl Chloride (UPVC) Injection Moulded Fittings for Soil and Waste Discharge System for Inside and Outside Buildings Including Ventilation and Rain Water System -

40-160mm

11113 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
19(Marking)	-	500	25% Discount for BIS
3(Type of Fitting)	-	500	25% Discount for BIS
4(Size Designation)	-	500	25% Discount for BIS
5(Colour of fittings)	-	500	25% Discount for BIS
7.1,Table 1(Wall thickness)	-	500	25% Discount for BIS
7.2 ,Table 2&3(Socket Dimensions)	-	500	25% Discount for BIS
7.3(Dimensions of waste trap(Nahani Trap)	-	500	25% Discount for BIS
8(Sealing Rings)	-	500	25% Discount for BIS
10(Workmanship)	-	500	25% Discount for BIS
11(Design requirements)	-	500	25% Discount for BIS
11.1(Solvent cement type or Rubber ring type)	-	500	25% Discount for BIS
11.2(Socket and spigot configeration)	-	500	25% Discount for BIS
11.4,Table 5(Vent cowl)	-	500	25% Discount for BIS
11.5,Table 6(Pipe Clips)	-	500	25% Discount for BIS
12(Physical test requirements)	-	500	25% Discount for BIS
12.1(Visual appearance)	-	500	25% Discount for BIS
12.2(Stress relief test)	-	700	25% Discount for BIS
12.3(Vicat softening tempewrature)	-	1100	25% Discount for BIS
Cl.13, IS 12235 (P-7)-2004, (Resistance to Sulphuric Acid)	-	2000	25% Discount for BIS Specimen Prepration Charge 500/-
Cl.14, Annex A(Titanium Di-Oxide Content)	-	1200	25% Discount for BIS
Cl.15, Annex B(Sulphated Ash Content)	-	1200	25% Discount for BIS
16(Mechanical Properties)	-	1100	25% Discount for BIS
16.1(Impact test)	-	1100	25% Discount for BIS
17(Watet tightness of joint)	-	850	25% Discount for BIS
12.4(Effect on water test)	-	3000	25% Discount for BIS
7.4(Chamfer)	-	500	25% Discount for BIS
11.3(Access Openings)	-	500	25% Discount for BIS
Table 4(Dimension of Access Openings)	-	500	25% Discount for BIS

22 May, 2027

-
Included w.e.f. 20.08.2024

9641

CIPET, Madurai

6139834

IS 14182 (1994)

Solvent cement for use with unplasticized polyvinyl chloride plastic pipe and fittings - Specifications

16- 355 mm

8263 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1 - Table 1 - v-a(Chemical Resistance - Change in mass, increase)	-	500	25% discount for BIS
4.1 - Table 1 - v-a(Chemical Resistance - Change in mass, Decrease)	-	500	25% discount for BIS
4.1 - Table 1 - v-b(Chemical Resistance - Change in flexural yield strength, Increase)	-	500	25% discount for BIS
4.1 - Table 1 - v-b(Chemical Resistance - Change in flexural yield strength, Decrease)	-	500	25% discount for BIS
4.2(Shall be thixotropic and consist substantially of solvents that will swell plastisized PVC polymers and stabilizers)	-	500	25% discount for BIS
4.3(Shall be capable of application by brush and shall contain no lumps or foreign matter or macroscopic undissolved particles that will adversely affect the ultimate joint strength or chemical resistance of the material )	-	500	25% discount for BIS
4.4(Shall not show gelation and no evidence of stratification or separation that cannot be removed by stirring)	-	500	25% discount for BIS
4.5(When used under the conditions for which they are designed, non metallic materials in contact with or likely to come in contact with potable water shall not constitute a toxic hazard , shall not support microbial growth and shall not give rise to unpleasant taste or odour, cloudiness or discolouration of the water)	-	3000	25% discount for BIS
4.6(Solvents systems consisting of blends of tetrahydrofuran and cyclohexanone have been found to be acceptable)	-	500	25% discount for BIS
4.7(Vinyl Chloride Polymer content - Annex A)	-	1100	25% discount for BIS
4.8(Dissolution - Capable of dissolving an additional unplastisized PVC granular, powder compound or resin)	-	500	25% discount for BIS
4.5(REQUIREMENTS)	-	3000	25% discount for BIS
4.6(REQUIREMENTS)	-	500	25% discount for BIS
4.7 and 6.1(REQUIREMENTS - Vinyl Chloride Polymer Content)	-	1100	25% discount for BIS
4.8(Dissolution)	-	500	25% discount for BIS
4.9 and 6.1(Viscosity)	-	1100	25% discount for BIS
4.9 and 6.1(Viscosity - Regular)	-	1100	25% discount for BIS
4.9 and 6.1(Viscosity - Medium)	-	1100	25% discount for BIS
4.9 and 6.1(Viscosity - Heavy )	-	1100	25% discount for BIS
4.10 and 6.1(Lap Shear Strength - After 2 h curing time)	-	1100	25% discount for BIS Specimen Prepration Charges 500/-
4.10 and 6.1(Lap Shear Strength - After 10 h curing time)	-	1100	25% discount for BIS Specimen Prepration Charges 500/-
4.10 and 6.1(Lap Shear Strength - After 72 h curing time)	-	1100	25% discount for BIS Specimen Prepration Charges 500/-
4.11 and 6.1(Hydrostatic Burst Strength - After 2 h curing time)	-	850	25% discount for BIS Specimen Prepration Charges 500/-
4.7(Vinyl Chloride Polymer Content)	-	1100	25% discount for BIS
4.8(Dissolution)	-	500	25% discount for BIS
4.9(Viscosity)	-	1100	25% discount for BIS
4.10(Lap Shear Strength)	-	1100	25% discount for BIS Specimen Prepration Charges 500/-
4.11(Hydrostatic Burst Strength)	-	850	-
4.12(Shelf Life)	-	500	-
6.1(Test)	-	500	25% discount for BIS
6.2(Quality of Reagants)	-	500	25% discount for BIS
7(Packing and Marking)	-	500	25% discount for BIS

22 May, 2027

-
Included w.e.f. 20.08.2024

9642

Lauritz Knudsen Switchgear Testing Laboratories, MSW, SEIPL, Mumbai

7177626

IS/IEC 60947 : PART 3 (2020)

Low-Voltage Switchgear and Controlgear: Part 3 Switches Disconnectors Switch-Disconnectors and Fuse-Combination Units

2189000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General)	-	0	No Test
4(Classification)	-	0	No Test
5.3.2(Rated voltages)	-	2000	No Test
5.3.2.1(Rated operational voltage)	-	2000	No Test
5.3.2.2(Rated insulation voltage)	-	2000	No Test
5.3.2.3(Rated impulse withstand voltage)	-	2000	No Test
5.3.3(Currents)	-	2000	No Test
5.3.3.2(Conventional free air thermal current)	-	2000	No Test
5.3.3.3(Conventional enclosed thermal current)	-	2000	No Test
5.3.3.4(Rated operational current (Ie) or rated operational power)	-	2000	No Test
5.3.3.5(Rated uninterrupted current)	-	2000	No Test
5.3.4(Rated frequency)	-	2000	No Test
5.3.5(Rated duty)	-	2000	No Test
5.3.5.2(Eight-hour duty)	-	2000	No Test
5.3.5.3(Uninterrupted duty)	-	2000	No Test
5.3.6.1(Ability to withstand motor switching overload currents)	-	2000	No Test
5.3.6.2(Rated making capacity)	-	2000	No Test
5.3.6.3(Rated breaking capacity)	-	2000	No Test
5.3.7(Short-circuit characteristics)	-	2000	No Test
5.3.7.1(Rated short-time withstand current)	-	2000	No Test
5.3.7.2(Rated short-circuit making capacity)	-	2000	No Test
5.3.7.4(Rated conditional short-circuit current)	-	2000	No Test
5.4(Utilization category)	-	2000	No Test
5.5(Control circuits)	-	2000	No Test
5.6(Auxiliary circuits)	-	2000	No Test
5.7(Relays and releases)	-	2000	No Test
5.8(Co-ordination with short-circuit protective devices (SCPD))	-	2000	No Test
6.2.2(Marking)	-	1000	-
6.3(Instructions for installation, operation and maintenance, decommissioning and dismantling)	-	1000	-
7(Normal service, mounting and transport conditions)	-	10000	-
8.1.1(General)	-	20000	-
8.1.2.2(Glow wire testing)	-	20000	-
8.1.7.1(General)	-	5000	-
8.2.3(Dielectric properties)	-	25000	-
8.2.3.2(Impulse withstand voltage)	-	25000	-
8.2.3.3(Power-frequency or DC withstand voltage of the main, auxiliary and control circuits)	-	25000	-
8.2.7(Additional performance requirements for equipment suitable for isolation)	-	5000	-
9.1.3.3(Dielectric test)	-	25000	-
9.1.4(Sampling tests)	-	25000	-
9.2(Compliance with constructional requirements)	-	25000	-
9.3.4.3(Test of dielectric properties)	-	25000	-
9.3.4.5(Dielectric verification)	-	25000	-
9.3.4.6(Leakage current)	-	10000	-
8.3(Electromagnetic compatibility tests)	-	20000	NOT IN NABL SCOPE
9.5.4(Damp heat, salt mist, vibration and shock)	-	50000	-
D.7.1.1(Ambient air temperature)	-	1000	-
D.8.1.4(Clearances and creepage distances)	-	5000	-
D.8.1.12(Degrees of protection of enclosed equipment)	-	30000	-
D.9.3.11(Climatic test)	-	50000	-
E.9.3.1(Flexion test)	-	25000	-
E.9.3.2(Pull-out test)	-	25000	-
8.1.7.2(Additional constructional requirements)	-	5000	-
8.1.9(Additional requirements for equipment provided with a neutral pol)	-	1000	-
8.2.5(Ability to make, break or withstand short-circuit currents)	-	45000	-
8.2.8(Critical load current performance: DC equipment)	-	45000	-
8.2.9(Overload requirements for equipment incorporating fuses)	-	45000	-
9.3.3.6(DC test current ripple)	-	45000	-
9.3.6.2(Short-time withstand current test)	-	45000	-
9.3.6.3(Short-circuit making capacity test)	-	45000	-
9.3.7.2(Circuit-breaker protected short-circuit withstand)	-	45000	-
9.3.7.3(Fuse protected short-circuit withstand)	-	45000	-
9.3.9.2(Determination of critical load current)	-	45000	-
8.2.1(Operating conditions)	-	45000	-
8.2.1.1(General)	-	5000	-
8.2.1.2(Limits of operation of power operated equipment)	-	5000	-
8.2.1.3(Limits of operation of under-voltage relays and releases)	-	5000	-
8.2.1.4(Limits of operation of shunt releases)	-	5000	-
8.2.4(Ability to make and break under no-load, normal load and overload conditions)	-	30000	-
8.2.4.1(Making and breaking capacities)	-	30000	-
8.2.4.2(Operational performance)	-	70000	-
8.2.4.3(Mechanical durability)	-	90000	-
8.2.4.4(Electrical durability)	-	140000	-
9.1.3.2(Mechanical operation test)	-	50000	-
9.1.3.2(Mechanical operation test)	-	50000	-
9.1.5Special tests(Special tests)	-	140000	-
9.3.4.4(Making and breaking capacities)	-	40000	-
9.3.4.4.3(Characteristics of transient recovery voltage)	-	20000	-
9.3.5.2(Operational performance test)	-	140000	-
9.3.8.2(Overload test)	-	50000	-
9.5.2(Mechanical durability)	-	90000	-
9.5.3(Electrical durability)	-	140000	-
8.2.2(Temperature-rise)	-	15000	-
9.3.4.2(Temperature-rise)	-	15000	-
D.9.3.10(Thermal cycling test)	-	25000	-
D.9.3.12(Temperature-rise verification with solar effects – Outdoor units only)	-	15000	-
E.9.2(Current cycling test)	-	20000	-
E.9.2.4(Temperature measurements)	-	15000	-
3.1(General)	-	0	No test
4(Classification)	-	0	No test
5.3.2(Rated voltages)	-	2000	-
5.3.2.1(Rated operational voltage)	-	2000	-
5.3.2.2(Rated insulation voltage)	-	2000	-
5.3.2.3(Rated impulse withstand voltage)	-	2000	-
5.3.3(Currents)	-	2000	-
5.3.3.2(Conventional free air thermal current)	-	2000	-
5.3.3.3(Conventional enclosed thermal current)	-	2000	-
5.3.3.4(Rated operational current (Ie) or rated operational power)	-	2000	-
5.3.3.5(Rated uninterrupted current)	-	1999.99	-
5.3.4(Rated frequency)	-	1999.99	-
5.3.5(Rated duty)	-	2000	-
5.3.5.2(Eight-hour duty)	-	2000	-
5.3.5.3(Uninterrupted duty)	-	2000	-
5.3.6.1(Ability to withstand motor switching overload currents)	-	2000	-
5.3.6.2(Rated making capacity)	-	2000	-
5.3.6.3(Rated breaking capacity)	-	2000	-
5.3.7(Short-circuit characteristics)	-	2000	-
5.3.7.1(Rated short-time withstand current)	-	2000	-
5.3.7.2(Rated short-circuit making capacity)	-	2000	-
5.3.7.4(Rated conditional short-circuit current)	-	2000	-
5.4(Utilization category)	-	2000	-
5.5(Control circuits)	-	2000	-
5.6(Auxiliary circuits)	-	2000	-
5.7(Relays and releases)	-	2000	-
5.8(Co-ordination with short-circuit protective devices (SCPD))	-	2000	-
6.2.2(Marking)	-	1000	-
6.3(Instructions for installation, operation and maintenance, decommissioning and dismantling)	-	1000	-
7(Normal service, mounting and transport conditions)	-	10000	-
8.1.1(General)	-	20000	-
8.1.2.2(Glow wire testing)	-	20000	-
8.1.7.1(General)	-	5000	-
8.2.3(Dielectric properties)	-	25000	-
8.2.3.2(Impulse withstand voltage)	-	25000	-
8.2.3.3(Power-frequency or DC withstand voltage of the main, auxiliary and control circuits)	-	25000	-
8.2.7(Additional performance requirements for equipment suitable for isolation)	-	5000	-
9.1.3.3(Dielectric test)	-	25000	-
9.1.4(Sampling tests)	-	25000	-
9.2(Compliance with constructional requirements)	-	25000	-
9.3.4.3(Test of dielectric properties)	-	25000	-
9.3.4.5(Dielectric verification)	-	25000	-
9.3.4.6(Leakage current)	-	10000	-
8.3(Electromagnetic compatibility tests)	-	20000	-
9.5.4(Damp heat, salt mist, vibration and shock)	-	50000	-
D.7.1.1(Ambient air temperature)	-	1000	-
D.8.1.4(Clearances and creepage distances)	-	5000	-
D.8.1.12(Degrees of protection of enclosed equipment)	-	30000	-
D.9.3.11(Climatic test)	-	50000	-
E.9.3.1(Flexion test)	-	25000	-
E.9.3.2(Pull-out test)	-	25000	-
8.1.7.2(Additional constructional requirements)	-	5000	-
8.1.9(Additional requirements for equipment provided with a neutral pol)	-	1000	-
8.2.5(Ability to make, break or withstand short-circuit currents)	-	45000	-
8.2.8(Critical load current performance: DC equipment)	-	45000	-
8.2.9(Overload requirements for equipment incorporating fuses)	-	45000	-
9.3.3.6(DC test current ripple)	-	45000	-
9.3.6.2(Short-time withstand current test)	-	45000	-
9.3.6.3(Short-circuit making capacity test)	-	45000	-
9.3.7.2(Circuit-breaker protected short-circuit withstand)	-	45000	-
9.3.7.3(Fuse protected short-circuit withstand)	-	45000	-
9.3.9.2(Determination of critical load current)	-	45000	-
8.2.1(Operating conditions)	-	45000	-
8.2.1.1(General)	-	5000	-
8.2.1.2(Limits of operation of power operated equipment)	-	5000	-
8.2.1.3(Limits of operation of under-voltage relays and releases)	-	5000	-
8.2.1.4(Limits of operation of shunt releases)	-	5000	-
8.2.4(Ability to make and break under no-load, normal load and overload conditions)	-	30000	-
8.2.4.1(Making and breaking capacities)	-	30000	-
8.2.4.2(Operational performance)	-	70000	-
8.2.4.3(Mechanical durability)	-	90000	-
8.2.4.4(Electrical durability)	-	140000	-
9.1.3.2(Mechanical operation test)	-	50000	-
9.1.3.2(Mechanical operation test)	-	5000	-
9.1.5Special tests(Special tests)	-	140000	-
9.3.4.4(Making and breaking capacities)	-	40000	-
9.3.4.4.3(Characteristics of transient recovery voltage)	-	20000	-
9.3.5.2(Operational performance test)	-	140000	-
9.3.8.2(Overload test)	-	50000	-
9.5.2(Mechanical durability)	-	90000	-
9.5.3(Electrical durability)	-	140000	-
8.2.2(Temperature-rise)	-	14999.99	-
9.3.4.2(Temperature-rise)	-	15000	-
D.9.3.10(Thermal cycling test)	-	25000	-
D.9.3.12(Temperature-rise verification with solar effects – Outdoor units only)	-	15000	-
E.9.2(Current cycling test)	-	20000	-
E.9.2.4(Temperature measurements)	-	15000	-
3.1(General)	-	2000	NO TEST
4(Classification)	-	2000	NO TEST
5.3.2(Rated voltages)	-	2000	NO TEST
5.3.2.1(Rated operational voltage)	-	2000	NO TEST
5.3.2.2(Rated insulation voltage)	-	2000	NO TEST
5.3.2.3(Rated impulse withstand voltage)	-	2000	NO TEST
5.3.3(Currents)	-	2000	NO TEST
5.3.3.2(Conventional free air thermal current)	-	2000	NO TEST
5.3.3.3(Conventional enclosed thermal current)	-	2000	NO TEST
5.3.3.4(Rated operational current (Ie) or rated operational power)	-	2000	NO TEST
5.3.3.5(Rated uninterrupted current)	-	2000	NO TEST
5.3.4(Rated frequency)	-	2000	NO TEST
5.3.5(Rated duty)	-	2000	NO TEST
5.3.5.2(Eight-hour duty)	-	2000	NO TEST
5.3.5.3(Uninterrupted duty)	-	2000	NO TEST
5.3.6.1(Ability to withstand motor switching overload currents)	-	2000	NO TEST
5.3.6.2(Rated making capacity)	-	2000	NO TEST
5.3.6.3(Rated breaking capacity)	-	2000	NO TEST
5.3.7(Short-circuit characteristics)	-	2000	NO TEST
5.3.7.1(Rated short-time withstand current)	-	2000	NO TEST
5.3.7.2(Rated short-circuit making capacity)	-	2000	NO TEST
5.3.7.4(Rated conditional short-circuit current)	-	2000	NO TEST
5.4(Utilization category)	-	2000	NO TEST
5.5(Control circuits)	-	2000	NO TEST
5.6(Auxiliary circuits)	-	2000	N0 TEST
5.7(Relays and releases)	-	2000	NO TEST
5.8(Co-ordination with short-circuit protective devices (SCPD))	-	2000	NO TEST
6.2.2(Marking)	-	1000	-
6.3(Instructions for installation, operation and maintenance, decommissioning and dismantling)	-	1000	-
7(Normal service, mounting and transport conditions)	-	10000	-
8.1.1(General)	-	20000	-
8.1.2.2(Glow wire testing)	-	20000	-
8.1.7.1(General)	-	5000	-
8.2.3(Dielectric properties)	-	25000	-
8.2.3.2(Impulse withstand voltage)	-	25000	-
8.2.3.3(Power-frequency or DC withstand voltage of the main, auxiliary and control circuits)	-	25000	-
8.2.7(Additional performance requirements for equipment suitable for isolation)	-	5000	-
9.1.3.3(Dielectric test)	-	25000	-
9.1.4(Sampling tests)	-	25000	-
9.2(Compliance with constructional requirements)	-	25000	-
9.3.4.3(Test of dielectric properties)	-	25000	-
9.3.4.5(Dielectric verification)	-	25000	-
9.3.4.6(Leakage current)	-	10000	-
8.3(Electromagnetic compatibility tests)	-	20000	NOT IN NABL SCOPE
9.5.4(Damp heat, salt mist, vibration and shock)	-	50000	-
D.7.1.1(Ambient air temperature)	-	50000	-
D.8.1.4(Clearances and creepage distances)	-	5000	-
D.8.1.12(Degrees of protection of enclosed equipment)	-	30000	-
D.9.3.11(Climatic test)	-	50000	-
E.9.3.1(Flexion test)	-	25000	-
E.9.3.2(Pull-out test)	-	25000	-
8.1.7.2(Additional constructional requirements)	-	5000	-
8.1.9(Additional requirements for equipment provided with a neutral pol)	-	1000	-
8.2.5(Ability to make, break or withstand short-circuit currents)	-	30000	-
8.2.8(Critical load current performance: DC equipment)	-	45000	-
8.2.9(Overload requirements for equipment incorporating fuses)	-	45000	-
9.3.3.6(DC test current ripple)	-	45000	-
9.3.6.2(Short-time withstand current test)	-	45000	-
9.3.6.3(Short-circuit making capacity test)	-	45000	-
9.3.7.2(Circuit-breaker protected short-circuit withstand)	-	45000	-
9.3.7.3(Fuse protected short-circuit withstand)	-	45000	-
9.3.9.2(Determination of critical load current)	-	45000	-
8.2.1(Operating conditions)	-	45000	-
8.2.1.1(General)	-	5000	-
8.2.1.2(Limits of operation of power operated equipment)	-	5000	-
8.2.1.3(Limits of operation of under-voltage relays and releases)	-	5000	-
8.2.1.4(Limits of operation of shunt releases)	-	5000	-
8.2.4(Ability to make and break under no-load, normal load and overload conditions)	-	30000	-
8.2.4.1(Making and breaking capacities)	-	30000	-
8.2.4.2(Operational performance)	-	70000	-
8.2.4.3(Mechanical durability)	-	90000	-
8.2.4.4(Electrical durability)	-	140000	-
9.1.3.2(Mechanical operation test)	-	50000	-
9.1.3.2(Mechanical operation test)	-	50000	-
9.1.5Special tests(Special tests)	-	140000	-
9.3.4.4(Making and breaking capacities)	-	40000	-
9.3.4.4.3(Characteristics of transient recovery voltage)	-	20000	-
9.3.5.2(Operational performance test)	-	140000	-
9.3.8.2(Overload test)	-	50000	-
9.5.2(Mechanical durability)	-	90000	-
9.5.3(Electrical durability)	-	140000	-
8.2.2(Temperature-rise)	-	15000	-
9.3.4.2(Temperature-rise)	-	15000	-
D.9.3.10(Thermal cycling test)	-	15000	-
D.9.3.12(Temperature-rise verification with solar effects – Outdoor units only)	-	15000	-
E.9.2(Current cycling test)	-	20000	-
E.9.2.4(Temperature measurements)	-	15000	-
3.1(General)	-	2000	NO TEST
4(Classification)	-	2000	NO TEST
5.3.2(Rated voltages)	-	2000	NO TEST
5.3.2.1(Rated operational voltage)	-	2000	NO TEST
5.3.2.2(Rated insulation voltage)	-	2000	NO TEST
5.3.2.3(Rated impulse withstand voltage)	-	2000	NO TEST
5.3.3(Currents)	-	2000	NO TEST
5.3.3.2(Conventional free air thermal current)	-	2000	NO TEST
5.3.3.3(Conventional enclosed thermal current)	-	2000	NO TEST
5.3.3.4(Rated operational current (Ie) or rated operational power)	-	2000	NO TEST
5.3.3.5(Rated uninterrupted current)	-	2000	NO TEST
5.3.4(Rated frequency)	-	2000	NO TEST
5.3.5(Rated duty)	-	2000	NO TEST
5.3.5.2(Eight-hour duty)	-	2000	NO TEST
5.3.5.3(Uninterrupted duty)	-	2000	NO TEST
5.3.6.1(Ability to withstand motor switching overload currents)	-	2000	NO TEST
5.3.6.2(Rated making capacity)	-	2000	NO TEST
5.3.6.3(Rated breaking capacity)	-	2000	NO TEST
5.3.7(Short-circuit characteristics)	-	2000	NO TEST
5.3.7.1(Rated short-time withstand current)	-	2000	NO TEST
5.3.7.2(Rated short-circuit making capacity)	-	2000	NO TEST
5.3.7.4(Rated conditional short-circuit current)	-	2000	NO TEST
5.4(Utilization category)	-	2000	NO TEST
5.5(Control circuits)	-	2000	NO TEST
5.6(Auxiliary circuits)	-	2000	NO TEST
5.7(Relays and releases)	-	2000	NO TEST
5.8(Co-ordination with short-circuit protective devices (SCPD))	-	2000	NO TEST
6.2.2(Marking)	-	1000	-
6.3(Instructions for installation, operation and maintenance, decommissioning and dismantling)	-	1000	-
7(Normal service, mounting and transport conditions)	-	10000	-
8.1.1(General)	-	20000	-
8.1.2.2(Glow wire testing)	-	20000	-
8.1.7.1(General)	-	5000	-
8.2.3(Dielectric properties)	-	25000	-
8.2.3.2(Impulse withstand voltage)	-	25000	-
8.2.3.3(Power-frequency or DC withstand voltage of the main, auxiliary and control circuits)	-	25000	-
8.2.7(Additional performance requirements for equipment suitable for isolation)	-	5000	-
9.1.3.3(Dielectric test)	-	25000	-
9.1.4(Sampling tests)	-	25000	-
9.2(Compliance with constructional requirements)	-	25000	-
9.3.4.3(Test of dielectric properties)	-	25000	-
9.3.4.5(Dielectric verification)	-	25000	-
9.3.4.6(Leakage current)	-	10000	-
8.3(Electromagnetic compatibility tests)	-	20000	NOT IN NABL SCOPE
9.5.4(Damp heat, salt mist, vibration and shock)	-	50000	-
D.7.1.1(Ambient air temperature)	-	1000	-
D.8.1.4(Clearances and creepage distances)	-	5000	-
D.8.1.12(Degrees of protection of enclosed equipment)	-	30000	-
D.9.3.11(Climatic test)	-	50000	-
E.9.3.1(Flexion test)	-	25000	-
E.9.3.2(Pull-out test)	-	25000	-
8.1.7.2(Additional constructional requirements)	-	5000	-
8.1.9(Additional requirements for equipment provided with a neutral pol)	-	1000	-
8.2.5(Ability to make, break or withstand short-circuit currents)	-	45000	-
8.2.8(Critical load current performance: DC equipment)	-	45000	-
8.2.9(Overload requirements for equipment incorporating fuses)	-	45000	-
9.3.3.6(DC test current ripple)	-	45000	-
9.3.6.2(Short-time withstand current test)	-	45000	-
9.3.6.3(Short-circuit making capacity test)	-	45000	-
9.3.7.2(Circuit-breaker protected short-circuit withstand)	-	45000	-
9.3.7.3(Fuse protected short-circuit withstand)	-	45000	-
9.3.9.2(Determination of critical load current)	-	45000	-
8.2.1(Operating conditions)	-	45000	-
8.2.1.1(General)	-	5000	-
8.2.1.2(Limits of operation of power operated equipment)	-	5000	-
8.2.1.3(Limits of operation of under-voltage relays and releases)	-	5000	-
8.2.1.4(Limits of operation of shunt releases)	-	5000	-
8.2.4(Ability to make and break under no-load, normal load and overload conditions)	-	30000	-
8.2.4.1(Making and breaking capacities)	-	30000	-
8.2.4.2(Operational performance)	-	70000	-
8.2.4.3(Mechanical durability)	-	90000	-
8.2.4.4(Electrical durability)	-	140000	-
9.1.3.2(Mechanical operation test)	-	50000	-
9.1.3.2(Mechanical operation test)	-	50000	-
9.1.5Special tests(Special tests)	-	140000	-
9.3.4.4(Making and breaking capacities)	-	50000	-
9.3.4.4.3(Characteristics of transient recovery voltage)	-	20000	-
9.3.5.2(Operational performance test)	-	140000	-
9.3.8.2(Overload test)	-	50000	-
9.5.2(Mechanical durability)	-	90000	-
9.5.3(Electrical durability)	-	140000	-
8.2.2(Temperature-rise)	-	15000	-
9.3.4.2(Temperature-rise)	-	15000	-
D.9.3.10(Thermal cycling test)	-	25000	-
D.9.3.12(Temperature-rise verification with solar effects – Outdoor units only)	-	15000	-
E.9.2(Current cycling test)	-	20000	-
E.9.2.4(Temperature measurements)	-	15000	-

11 Apr, 2027

-
Included w.e.f. 17.09.2024

9643

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 18482 (2023)

Textiles - Sandwich extrusion laminated polypropylene PP woven sacks for packaging bulk commodities - Specification

24880.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Sack Type)	-	0.00	-
5.2.1(Fabric)	-	0.00	-
5.2.2(Linear density of tapes)	-	500.00	-
5.2.4(Unlaminated fabric mass)	-	500.00	-
5.3.1.1.1(Mass of BOPP film in sandwich extrusion lamination)	-	500.00	-
5.3.1.1.2(Polypropylene coating mass for sandwich extrusion lamination of BOPP film with base PP woven fabric)	-	0.00	-
5.3.1.1.3(Total mass of BOPP film laminated woven fabric)	-	0.00	-
5.3.1.2.1(Mass of nonwoven fabric in sandwich extrusion lamination)	-	0.00	-
5.3.1.2.2(Polypropylene coating mass for sandwich extrusion lamination of non woven fabric with base PP woven fabric)	-	0.00	-
5.3.1.2.3(The total mass of nonwoven laminated woven fabric)	-	0.00	-
5.4.1(Sack)	-	2000.00	-
5.4.1.1(Centre seam)	-	1600.00	-
5.4.1.2(Bottom seam)	-	1600.00	-
5.4.2(Sack)	-	0.00	-
5.4.3(Sack)	-	0.00	-
5.4.5(Liner)	-	0.00	-
6.1.1, Table 1(Inside length)	-	500.00	-
6.1.1, Table 1(Inside width)	-	0.00	-
6.1.1, Table 1(Gusset width)	-	0.00	-
6.1.1, Table 1(Warp per dm)	-	500.00	-
6.1.1, Table 1(Weft per dm)	-	0.00	-
6.1.1, Table 1(Mass of laminated fabric)	-	0.00	-
6.2, Table 1(Average breaking strength - Lengthwise)	-	1600.00	-
6.2, Table 1(Average breaking strength - Widthwise)	-	1600.00	-
6.2, Table 1(Breaking strength of bottom seam)	-	1600.00	-
6.2, Table 1(Breaking strength of centre seam)	-	0.00	-
6.2, Table 1(Average elongation at break of fabric - Lengthwise)	-	0.00	-
6.2, Table 1(Average elongation at break of fabric - Widthwise)	-	0.00	-
6.3(Average breaking strength - Lengthwise after UV exposure)	-	0.00	-
6.4(Drop Impact Testing of Filled Sacks)	-	900.00	-
Clause 5.4.5.3("Free from pin holes (except for air removal perforations), patches, tears, blisters, and any other visible defects")	-	0.00	-
Clause 6.2.2(Stitch strength)	-	0.00	-
Clause 6.2.2(Weld seam strength)	-	1600.00	-
Clause 5.4.5.3("Free from pin holes (except for air removal perforations), patches, tears, blisters, and any other visible defects")	-	0.00	-
Clause 6.2.2(Stitch strength)	-	0.00	-
Clause 6.2.2(Weld seam strength)	-	0.00	-
Clause 6.5 Table 1 viii(Ash content)	-	1200.00	-
6.3(Average breaking strength - Widthwise after UV exposure)	-	11780.00	UV Charge- 10180.00 Breaking strength- 1600.00

24 Apr, 2027

-
Included w.e.f. 20.08.2024

9644

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 18573 (2024)

Cold formed welded carbon steel square and rectangular hollow sections for mechanical, general engineering and decorative purposes ï¿½ Specification

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 3.0(Types)	-	200	-
Clause.4.0(Carbon)	-	500	-
Clause.4.0(Sulphur)	-	500	-
Clause.4.0(Sulphur)	-	500	-
Clause.4.0(Phosphorus)	-	500	-
Clause.4.0(Silicon)	-	500	-
Clause.4.0(Manganese)	-	500	-
Clause.6.0(Workmanship)	-	500	-
Clause.7.0(Straightness)	-	200	-
Clause.9.0(Length)	-	200	-
Clause.10.0(Dimensions and properties)	-	200	-
Clause.11.0(General)	-	200	-
Clause.11.0(Outside Dimension)	-	200	-
Clause.11.0(Thickness)	-	200	-
Clause.11.0(Thickness)	-	200	-
Clause.11.0(Concavity and Convexity)	-	200	-
Clause.11.0(Squareness of Sides)	-	200	-
Clause.11.0(External Corner Radiius)	-	200	-
Clause.11.0(Straightness and twist)	-	200	-
Clause.12.0(Dimension Tolerances)	-	500	-
Clause.12.0(Dimension Tolerances)	-	500	-
Clause.13.0(Surface Protection)	-	500	-
Clause.15.0(Tensile test)	-	750	-
Clause.15.0(Yield strength)	-	750	-
Clause.15.0(Elognation Percent)	-	750	-
6(Workmanship)	-	200	-
10(Dimensions and Properties)	-	200	-
11(Measurement of Shape and Size)	-	200	-
12(Dimensions and Tolerances)	-	500	-
13(Surface Protection)	-	500	-
15(Tensile Test)	-	750	-
Clause.10.0(Dimensions and properties)	-	500	-

-
-

9645

IEC TEST LABS LLP

8165726

IS 7098 : Part 1 (1988)

Specification for crosslinked polyethylene insulated pvc sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision)

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(CONDUCTOR: MATERIALS)	-	1000	10% discount to BIS
6(ARMOURING)	-	1000	10% discount to BIS
7(OUTER SHEATH)	-	1000	10% discount to BIS
8.1(CONDUCTOR: CONSTRUCTION)	-	1000	10% discount to BIS
5.1(FILLER AND INNER SHEATH)	-	1000	10% discount to BIS
5.2(FILLER AND INNER SHEATH)	-	1000	10% discount to BIS
8.2(PROTECTIVE BARRIER)	-	1000	10% discount to BIS
8.3(SIZE OF NEUTRAL CONDUCTOR)	-	1000	10% discount to BIS
9.1(Insulation Applied by extrusicn)	-	1000	10% discount to BIS
9.2(Thickness of Insulation - Average)	-	1000	10% discount to BIS
9.3(Thickness of Insulation - Minimum)	-	1000	10% discount to BIS
9.4(Application of Insulation)	-	1000	-
10.1(Core Identification)	-	1000	10% discount to BIS
10.2(Core Identification- Neutral)	-	1000	10% discount to BIS
10.3(Core Identification by number )	-	1000	10% discount to BIS
10.4(Core Identification by number - Neutral )	-	1000	10% discount to BIS
11(LAVING UP OF CORES)	-	1000	10% discount to BIS
12.1 & 12.2(Inner sheath : Application)	-	1000	10% discount to BIS
12.3(Thickness of Inner Sheath)	-	1000	10% discount to BIS
13.1(Armouring: Application)	-	1000	10% discount to BIS
13.1.2(Armouring: Coverage )	-	1000	10% discount to BIS
13.1.3(Armouring: Direction of Lay )	-	1000	10% discount to BIS
13.2(Type of armour )	-	1000	10% discount to BIS
13.3(Armouring : Dimensions -Wire Diameter)	-	1000	10% discount to BIS
13.3(Armouring : Dimensions -Formed wire )	-	1000	10% discount to BIS
13.4(Armour: Joint)	-	1000	10% discount to BIS
13.5(Armouring : Resistance Test)	-	1000	10% discount to BIS
13.6 a)(ARMOURING: Tensile Strength)	-	1000	10% discount to BIS
13.6 b)(ARMOURING: Elongation )	-	1000	10% discount to BIS
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	1000	10% discount to BIS
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	1000	10% discount to BIS
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	1000	10% discount to BIS
13.6 f)(ARMOURING: Mass of zinc coating )	-	1000	10% discount to BIS
13.6 g)(ARMOURING: Resistivity)	-	1000	-
14.1(Outer Sheath : Application)	-	1000	-
14.2(Colour of outer sheath)	-	1000	-
14.3(Thickness of outer sheath - AVERAGE)	-	1000	-
14.3(Thickness of outer sheath - minimum)	-	1000	10% discount to BIS
15.1 a) i)(Annealing Test ( For copper wire ) )	-	1000	10% discount to BIS
15.1 a) ii)(Tensile test (for aluminium) - Before stranding )	-	1000	10% discount to BIS
15.1 a) ii)(Tensile test (for aluminium) - After stranding )	-	1000	10% discount to BIS
15.1 a) iii)(Wrapping test (for aluminium))	-	1000	10% discount to BIS
15.1 a) iv)(Resistance test - Main conductor)	-	1000	10% discount to BIS
15.1 a) iv)(Resistance test - Neutral conductor)	-	1000	10% discount to BIS
15.1 d) i) (Phyaical tests for insulation : Tensile Test)	-	1000	10% discount to BIS
15.1 d) i) (Phyaical tests for insulation : Elongation)	-	1000	10% discount to BIS
15.1 d) ii) (Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	1000	10% discount to BIS
15.1 d) ii) (Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	1000	10% discount to BIS
15.1 d) iii) (Phyaical tests for insulation : Hot set )	-	1000	10% discount to BIS
15.1 d) iv) (Phyaical tests for insulation : Shrinkage )	-	1000	10% discount to BIS
15.1 d) iv) (Phyaical tests for insulation : Shrinkage - Crack observed )	-	1000	10% discount to BIS
15.1 d) v) (Insulation: Waterabsorption(gravimetric))	-	1000	10% discount to BIS
15.1 e) i) (Physical tests for outer sheath : Tensile stregth)	-	1000	-
15.1 e) i) (Physical tests for outer sheath : Elongation)	-	1000	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	1000	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation )	-	1000	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	1000	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	1000	10% discount to BIS
15.1 e) iii) (Sheath: Loss of mass in air oven)	-	1000	10% discount to BIS
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage )	-	1000	10% discount to BIS
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage - Crack observed )	-	1000	10% discount to BIS
15.1 e) v) (Sheath : Hot deformation)	-	1000	10% discount to BIS
15.1 e) vi) (Sheath : Heat shock test)	-	1000	10% discount to BIS
15.1 e) vii) (Sheath : Thermalstability)	-	1000	10% discount to BIS
15.1 f)(INSULATION RESISTANCE TEST : Volume resistivity )	-	1000	10% discount to BIS
16.2(HIGH VOLTAGE TEST )	-	1000	10% discount to BIS
16.3(FLAMMABILITY TEST : Period of Burning )	-	1000	10% discount to BIS
16.3(FLAMMABILITY TEST : Unaffected length )	-	1000	10% discount to BIS
16.9(Oxygen Index Test)	-	1000	10% discount to BIS
16.1(Flame Retardance Test on Single Cables)	-	1000	10% discount to BIS
16.11(Flame Retardance Test on Bunched Cables)	-	1000	10% discount to BIS
16.13(Test for Halogen Acid Gas Evolution)	-	1000	10% discount to BIS
16.14(Temperature Index)	-	1000	10% discount to BIS
17.1(Manufacturer'. identification)	-	1000	10% discount to BIS
17.2(cable Indentification )	-	1000	10% discount to BIS
17.3(cable Code )	-	1000	10% discount to BIS
15.4 (a)(Cold bend)	-	1000	10% discount to BIS
15.4 (b)(Cold impact)	-	1000	10% discount to BIS
Table 1(Ageing in air oven - Elongation on Insulation)	-	1000	10% discount to BIS
Table 1(Ageing in air oven - Tensile strength on Insulation)	-	1000	10% discount to BIS
Table 1(Ageing in air oven - Elongation on Insulation)	-	1000	10% discount to BIS
Table 1(Ageing in air oven - Tensile strength on Insulation)	-	1000	10% discount to BIS
Table 4(Copper purity test)	-	1000	10% discount to BIS
Cl No. 16.15(Smoke density test)	-	1000	10% discount to BIS
Table 2(Cold Impact test for Outer sheath)	-	1000	10% discount to BIS
Table 2(Cold bend test for Outer sheath)	-	1000	10% discount to BIS
Cl 16(Halogen Acid Gas Test)	-	1000	10% discount to BIS
Cl 16(Halogen Acid Gas Test)	-	1000	10% discount to BIS
Cl 16(Halogen Acid Gas Test)	-	1000	10% discount to BIS
4(INSULATION : MATERIALS)	-	1000	10% discount to BIS
15.1 d) iii) (Phyaical tests for insulation : Permanent set )	-	1000	10% discount to BIS

07 Sep, 2029

-
Included w.e.f. 11-09-2024.

9646

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 280 (2006)

Mild steel wire for general engineering purposes (Fourth Revision)

Light,Medium and Heavy Coated (3.15 mm to 12.5 mm)

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	2000	For complete Cl 7 and 8
Cl 9(Tensile Test On UTM)	-	1500	For Complete Cl 9
Cl 11(Workmanship)	-	500	For complete Cl 11
Cl 13(Workmanship)	-	500	For complete Cl 13
7 & 8(Ovality)	-	2000	For complete Cl 7 and Cl 8
7 & 8(Diameter)	-	2000	For complete Cl 7 and Cl 8
9.2(Wrapping Test)	-	1500	For complete Cl 9
9.3(Bend test)	-	1500	For complete Cl 9
10(Finish)	-	500	For complete Cl 10
11(Coating test)	-	500	For complete Cl 11
13(Freedom from defects)	-	500	For complete Cl 11
6 AND AS PER IS 7887(MICRO ALLOY)	-	1000	For complete Chemical testing, if required
6 AND AS PER IS 7887(ALUMINIUM)	-	1000	For complete Chemical testing, if required
6 AND AS PER IS 7887(PHOSPHORUS)	-	1000	For complete Chemical testing, if required
6 AND AS PER IS 7887(SULPHUR)	-	1000	For complete Chemical testing, if required
6 AND AS PER IS 7887(MANGANESE)	-	1000	For complete Chemical testing, if required
6 AND AS PER IS 7887(SILICON)	-	1000	For complete Chemical testing, if required
6 AND AS PER IS 7887(CARBON)	-	1000	For complete Chemical testing, if required

-
-

9647

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 15658 (2021)

Concrete Paving Blocks - Specification ( First Revision )

M-30, M35, M40, M50, M55

15800 View breakup
Rs.18600/- for without optional requirements, Rs.21000/- for complete testing

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clauses 7.1.2 & 9.1.2 (Visual Inspection)	-	7800	For complete dimension and qualitative tests
Clause 7.2, Table No. 2, SI No. (i) (Width, W)	-	7800	For complete dimension and qualitative tests
Clause 7.2, Table No. 2, SI No. (i) (Indivdual Width, W)	-	7800	For complete dimension and qualitative tests
Clause 7.2, Table No. 2, SI No. (ii) (Length, L)	-	7800	For complete dimension and qualitative tests
Clause 7.2, Table No. 2, SI No. (ii) (Indivdual Length, L)	-	7800	For complete dimension and qualitative tests
Clause 7.2, Table No. 2, SI No. (iii) (Thickness, Th)	-	7800	For complete dimension and qualitative tests
Clause 7.2, Table No. 2, SI No. (iii) (Indivdual Thickness, Th)	-	7800	For complete dimension and qualitative tests
Clause 7.2, Table No. 2, SI No. (iv) (Aspect Ratio, L/Th)	-	7800	For complete dimension and qualitative tests
Clause 7.2, Table No. 2, SI No. (iv) (Indivdual Aspect Ratio, L/Th)	-	7800	For complete dimension and qualitative tests
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Width)	-	7800	For complete dimension and qualitative tests
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Width)	-	7800	For complete dimension and qualitative tests
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Depth)	-	7800	For complete dimension and qualitative tests
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Depth)	-	7800	For complete dimension and qualitative tests
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Plan Area (Asp))	-	7800	For complete dimension and qualitative tests
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Indivdual Plan Area (Asp))	-	7800	For complete dimension and qualitative tests
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Indivdual Thickness of wearing Layer)	-	7800	For complete dimension and qualitative tests
Clause 7.3 & 9.1.4, Table 3, SI No. (i) a)( Indivdual Water absorption)	-	2500	For Complete Water absorption
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Compressive strength (Average of eight test specimens))	-	1000	For Complete Compressive strength
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) a)(Indivdual Compressive strength (i))	-	1000	For Complete Compressive strength
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) i)( Indivdual Dry Abrasion Resistance )	-	2000	For dry abrassion -2000 extra (if required, not included in complete testing charges)
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) ii)(Dry Abrasion resistance (Average of three test specimens))	-	2000	For dry abrassion -2000 extra (if required, not included in complete testing charges)
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) i)( Indivdual Wet Abrasion Resistance )	-	2000	For dry abrassion -2000 extra (if required, not included in complete testing charges)
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) ii)(Wet Abrasion resistance (Average of three test specimens))	-	2000	For dry abrassion -2000 extra (if required, not included in complete testing charges)
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) a)(Indivdual Tensile splitting strength (i))	-	2500	For Complete Tensile and Flexural
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) b)(Average Tensile splitting strength )	-	2500	For Complete Tensile and Flexural
Clause 7.3, Annex F(Individual Failure Load per unit Length)	-	2500	For Complete Tensile and Flexural
Clause 7.3 & 9.1.4, Table 3, SI No. (v) a)(Indivdual Flexural strength (i))	-	2500	For Complete Tensile and Flexural
Clause 7.3 & 9.1.4, Table 3, SI No. (v) b)(Average Flexural strength )	-	2500	For Complete Tensile and Flexural
Clause 7.3, Annex G(Individual Breaking Load)	-	2500	For Complete Tensile and Flexural
Clause 7.3, Annex G(Average Breaking Load)	-	2500	For Complete Tensile and Flexural
Clause 7.1.1 (General Quality)	-	7800	For complete dimension and qualitative tests
Clause 7.3, Annex F(Average Failure Load per unit Length)	-	2500	For Complete Tensile and Flexural
Clause 7.2 & 9.1.3, Table 2, SI No. (ix)(Deviation from squareness)	-	7800	For complete dimension and qualitative tests
Clause 7.3 & 9.1.4, Table 3, SI No. (i) b)(Water absorption (Average of three test specimens))	-	2500	For Complete Water absorption
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Indivdual Ratio of wearing face area and Plan area (Asw/Asp))	-	7800	For complete dimension and qualitative tests
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Ratio of wearing face area and Plan area (Asw/Asp))	-	7800	For complete dimension and qualitative tests

-
Included w.e.f. 28-07-2021. Amendment 1 included w.e.f. 11-10-2022.

9648

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 710 (2010)

Marine plywood - Specification (Second Revision)

BWP 1800mmX900mm to 2400X1200mm, Thickness 3 to 25 mm

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(DIMENSIONS)	-	2500	-
9.1.2 , 9.1.2.1(Glue Adhesion in Dry State)	-	2500	-
9.1.2 , 9.1.2.2(Glue Adhesion in Dry State)	-	2500	-
9.1.3 , 9.1.3.1.1(Water resistance test)	-	2500	-
9.1.3 , 9.1.3.1.2(Water resistance test)	-	2500	-
9.1.4(Tensile strength)	-	2500	-
9.1.1(MOISTURE CONTENT)	-	2500	-
9.1.5(Mycological test)	-	1000	-
11.1(MARKING)	-	2500	For complete dimension and qualitative tests
11.2(MARKING)	-	2500	For complete dimension and qualitative tests
7.2(WORKMANSHIP AND FINISH )	-	2500	For complete dimension and qualitative tests
7.1(WORKMANSHIP AND FINISH )	-	2500	For complete dimension and qualitative tests
7.3(WORKMANSHIP AND FINISH )	-	2500	For complete dimension and qualitative tests
7.5(WORKMANSHIP AND FINISH )	-	2500	For complete dimension and qualitative tests
9.1.6 (Table 3)(Static bending strength)	-	2500	For Tensile strength and Static Bending strength and Wet Bending Strength
9.1.7 (Table 4)(Wet bending strength)	-	2500	For Tensile strength and Static Bending strength and Wet Bending Strength

-
Included w.e.f. 21-09-2022.

9649

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 1659 (2004)

Block boards - Specification (Fourth Revision)

Grade BWP & MR

6850 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.3(Dimensional Requirements - Variation in thickness - Annexure E)	-	2500	For complete dimension and qualitative tests
7.3(Dimensional Requirements - Squareness - Annexure D)	-	2500	-
7.3(Dimensional Requirements - Edge Straightness - Annexure D)	-	2500	-
7.3(Dimensional Requirements - Thickness - Annexure E)	-	2500	-
7.3(Dimensional Requirements - Width - 8.1.4)	-	2500	For complete dimension and qualitative tests
7.3(Dimensional Requirements - Length - 8.1.4)	-	2500	-
9.2.1(Dimensional Changes caused by humidity Change in local planeness - Annexure F)	-	2350	-
9.2.1(Dimensional Changes caused by humidity - Delamination - Annexure F)	-	2350	-
9.2.1(Dimensional Changes caused by humidity - Change in thickness - at 40% RH - Annexure F)	-	2350	For complete dimension and qualitative tests
9.2.1(Dimensional Changes caused by humidity - Change in Thickness - at 90% RH - Annexure F)	-	2350	For complete dimension and qualitative tests
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 40% RH - Annexure F)	-	2350	For complete dimension and qualitative tests
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 90% RH - Annexure F)	-	2350	For complete dimension and qualitative tests
9.2.2 (Resistance to water - Annexure G, Annexure H [For MR Grade])	-	1500	-
9.2.2 (Resistance to water - Annexure G, Annexure H [For BWP grade])	-	1500	-
9.2.3(Adhesion of Plies - Annexure H)	-	1000	-
9.2.4(Mycological Test [for MR grade only] - Annexure J)	-	500	-
9.2.5(Modulus of elasticity - MINIMUM INDIVIDUAL - Annexure K)	-	2500	-
9.2.5(Modulus of elasticity - AVERAGE - Annexure K)	-	2500	-
9.2.6(Spot test - Annexure L)	-	500	-
cl. 11(marking)	-	500	Marking and spot testing including.
cl. 11.1(marking - BIS certification marking)	-	500	Marking and spot testing including.

-
Included w.e.f. 21-09-2022.

9650

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 2202 : Part 1 (2023)

WOODEN FLUSH DOOR SHUTTERS SOLID CORE TYPE SPECIFICATION PART 1 PLYWOOD FACE PANELS Seventh Revision

20500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.1(Workmanship & Finish)	-	0	-
9.2(Workmanship & Finish)	-	0	-
9.3(Workmanship & Finish)	-	0	-
11.1(Dimensions - Height)	-	2500	For Cl 11.1
11.1(Dimensions - Width)	-	2500	For Cl 11.1
11.1(Dimensions - Thickness)	-	2500	For Cl 11.1
11.1(Dimensions - Variation in thickness)	-	2500	For Cl 11.1
11.1(Dimensions - Squareness)	-	2500	For Cl 11.1
11.12(End immersion test)	-	1000	For Cl 11.12
11.13(Knife Test)	-	500	For Cl 11.13
11.14(Glue Adhesion Test)	-	750	For Cl 11.14
4(GRADE)	-	2500	For Cl 4
4(TYPE)	-	2500	For Cl 4
5(SIZES)	-	2500	For Cl 7
7.1.1(CONSTRUCTION-Blockboard Core)	-	2500	For Cl 7
7.1.1(CONSTRUCTION-Blockboard Core)	-	2500	For Cl 7
7.1.2(CONSTRUCTION-Blockboard Core)	-	2500	For Cl 7
7.3.2(CONSTRUCTION-Stiles and Rails)	-	2500	For Cl 7
7.3.2(a)(CONSTRUCTION-Stiles and Rails-Joints)	-	2500	For Cl 7
7.3.2(b)(CONSTRUCTION-Stiles and Rails-Joints)	-	2500	For Cl 7
7.3.2(c)(CONSTRUCTION-Stiles and Rails-Joints)	-	2500	For Cl 7
7.3.3(CONSTRUCTION-Stiles and Rails)	-	2500	For Cl 7
9.1(WORKMANSHIP AND FINISH)	-	250	For Cl 9.1
9.2(WORKMANSHIP AND FINISH)	-	250	For Cl 9.2
9.3(WORKMANSHIP AND FINISH)	-	250	For Cl 9.3
11.1(Dimensions and Squareness Test)	-	2500	For Cl 11.1
11.1(Dimensions and Squareness Test)	-	2500	For Cl 11.1
11.1(Dimensions and Squareness Test)	-	2500	For Cl 11.1
11.1(Dimensions and Squareness Test)	-	2500	For Cl 11.1
11.1(Dimensions and Squareness Test)	-	2500	For Cl 11.1
11.2(General Flatness Test)	-	1000	For Cl 11.2
11.2(General Flatness Test)	-	1000	For Cl 11.2
11.2(General Flatness Test)	-	1000	For Cl 11.2
11.3(Local Planeness Test)	-	1000	For Cl 11.3
11.4(Impact Indentation Test)	-	1000	For Cl 11.4
11.4(Impact Indentation Test)	-	1000	For Cl 11.4
11.5(Flexure Test)	-	2000	For Cl 11.5
11.5(Flexure Test)	-	2000	For Cl 11.5
11.6(Edge Loading Test)	-	2000	For Cl 11.6
11.6(Edge Loading Test)	-	2000	For Cl 11.6
11.6(Edge Loading Test)	-	2000	For Cl 11.6
11.6(Edge Loading Test)	-	2000	For Cl 11.6
11.7.1(Shock Resistance Test)	-	2000	For Cl 11.7
11.7.2(Shock Resistance Test)	-	2000	For Cl 11.7
11.8(Buckling Test)	-	2000	For Cl 11.8
11.8(Buckling Test)	-	2000	For Cl 11.8
11.8(Buckling Test)	-	2000	For Cl 11.8
11.9.2(Slamming Test)	-	750	For Cl 11.9.2
11.9.3(Slamming Test)	-	750	For Cl 11.9.3
11.10(Misuse Test)	-	750	For Cl 11.10
11.11(Varying Humidity Test)	-	7250	For Cl 11.11
11.11(Varying Humidity Test)	-	7250	For Cl 11.11
11.12(End Immersion Test)	-	7250	For Cl 11.12
11.13(Knife Test)	-	500	For Cl 11.13
11.14(Glue Adhesion Test)	-	750	For Cl 11.14
11.15(Screw Withdrawal Resistance Test)	-	750	For Cl 11.15
11.15(Screw Withdrawal Resistance Test)	-	750	For Cl 11.15
Clause 4.2(grades specified)	-	2500	For Cl 4
Clause 5(SIZES)	-	2500	For Cl 5
Clause 6.1.1(species of timber)	-	2500	For Cl 6
Clause 6.1.2(list of species)	-	2500	For Cl 6
Clause 6.1.3(moisture content)	-	2500	For Cl 6
Clause 6.2.1(Plywood)	-	2500	For Cl 6
Clause 6.2.2(Decorative plywood)	-	2500	For Cl 6
Clause 6.3(Cross-Bands)	-	2500	For Cl 6
Clause 6.4.1(Commercial Face Veneers)	-	2500	For Cl 6
Clause 6.4.2(Decorative Face Veneers)	-	2500	For Cl 6
Clause 6.6.1(Adhesives)	-	2500	For Cl 6
Clause 6.7(Particle Board)	-	2500	For Cl 6
Clause 6.8(Medium density fibre board)	-	2500	For Cl 6
Clause 6.9(Alternative Materials)	-	2500	For Cl 6
Clause 7.1(Blockboard Core)	-	2500	For Cl 7
Clause 7.2(Particle Board or Medium Density Fibre)	-	2500	For Cl 7
Clause 7.3(Stiles and Rails)	-	2500	For Cl 7
Clause 7.4(Levelling)	-	2500	For Cl 7
Clause 7.5(Face Panel)	-	2500	For Cl 7
Clause 7.6(Lipping)	-	2500	For Cl 7
Clause 7.7(Rebating)	-	2500	For Cl 7
Clause 7.8(Opening for Glazing)	-	2500	For Cl 7
Clause 7.9(Venetian)	-	2500	For Cl 7
Clause 8.1(Locks)	-	2500	For Cl 8
Clause 9(WORKMANSHIP AND FINISH)	-	250	For Cl 9
Clause 10.1(Classification of Tests)	-	2500	For Cl 10.1
Clause 11.1(Dimensions and Squareness Test)	-	2500	For Cl 11.1
Clause 11.2(General Flatness Test)	-	1000	For Cl 11.2
Clause 11.3(Local Planeness Test)	-	1000	For Cl 11.3
Clause 11.4(Impact Indentation Test)	-	1000	For Cl 11.4
Clause 11.5(Flexure Test)	-	2000	For Cl 11.5
Clause 11.6(Edge Loading Test)	-	2000	For Cl 11.6
Clause 11.7(Shock Resistance Test)	-	2000	For Cl 11.7
Clause 11.8(Buckling Resistance Test)	-	2000	For Cl 11.8
Clause 11.9(Slamming Test)	-	750	For Cl 11.9
Clause 11.10(Misuse Test)	-	750	For Cl 11.10
Clause 11.11(Varying Humidity Test)	-	7250	For Cl 11.11
Clause 11.12(End Immersion Test)	-	7250	For Cl 11.12
Clause 11.13(Knife Test)	-	500	For Cl 11.13
Clause 11.14(Glue Adhesion Test)	-	750	For Cl 11.14
Clause 11.15(Screw Withdrawal Resistance Test)	-	2500	For Cl 11.15
Clause 12(SAMPLING AND CRITERIA FOR CONFORMITY)	-	2500	For Cl 12
Clause 13(ADDITIONAL REQUIREMENTS FOR ECO MARK)	-	2500	For Cl 13
Clause 14(Marking)	-	2500	For Cl 14
4(Grade, Type and Construction)	-	2500	For Cl 4
5(Sizes and Thickness)	-	2500	For Cl 5
6.1(Timber)	-	2500	For Cl 6
6.2(Plywood for flush door shutter)	-	2500	For Cl 6
6.3(Cross-Bands )	-	2500	For Cl 6
6.4.1(Commercial Face Veneers)	-	2500	For Cl 6
6.4.2(Decorative face veneers)	-	2500	For Cl 6
6.6(Adhesives)	-	2500	For Cl 6
6.7(Particle Board)	-	2500	For Cl 6
6.8(Medium Density Fibre)	-	2500	For Cl 6
6.9(Alternative Materials)	-	2500	For Cl 6
7(Construction)	-	2500	For Cl 7
8.1(Locks)	-	2500	For Cl 8
8.2(Other Fittings)	-	2500	For Cl 8
9(Workmanship and Finish)	-	250	For Cl 9
10(Tests)	-	2500	For Cl 10
11.1(Dimensions and Squareness Test)	-	2500	For Cl 11.1
11.2(General Flatness Test)	-	2000	For Cl 11.2
11.3(Local Planeness Test)	-	1000	For Cl 11.3
11.4(Impact Indentation Test)	-	1000	For Cl 11.4
11.5(Flexure Test)	-	2000	For Cl 11.5
11.6(Edge Loading Test)	-	2000	For Cl 11.6
11.7(Shock Resistance Test)	-	2000	For Cl 11.7
11.8(Buckling Resistance Test)	-	750	For Cl 11.8
11.9(Slamming Test)	-	750	For Cl 11.9
11.1(Misuse Test)	-	750	For Cl 11.1
11.11(Varying Humidity Test)	-	7250	For Cl 11.11
11.12(End Immersion Test)	-	7250	For Cl 11.12
11.13(Knife Test)	-	500	For Cl 11.13
11.14(Glue Adhesion Test)	-	750	For Cl 11.4
11.15(Screw Withdrawal Resistance Test)	-	750	For Cl 11.15
14(Marking )	-	2500	For Cl 14

-
Included w.e.f. 09-04-2024.

9651

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 2202 : Part 2 (2022)

WOODEN FLUSH DOOR SHUTTERS SOLID CORE TYPE SPECIFICATION PART 2 PARTICLE BOARD HIGH DENSITY FIBRE BOARD MEDIUM DENSITY FIBRE BOARD AND HARDBOARD FACE PANELS Fourth Revision

24500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No - 6.1(Timber)	-	250	For Complete Cl 6.1
Clause No -6.2(Alternative Materials (LVL)	-	2000	For Complete Cl 6.2
Clause No -6.2(Alternative Materials veneer laminated lumber (VLL))	-	2000	For Complete Cl 6.2
Clause No -6.2(Alternative Materials medium density fibre board (MDF))	-	2000	For Complete Cl 6.2
Clause No -6.2(Alternative Materials -plywood)	-	250	For Complete Cl 6.2
Clause No -6.2(BWP grade flush door shutter)	-	2000	For Complete Cl 6.2
Clause No -6.3.1("Face Panels: Particle Board MDF/ HDF Fibre Hardboard")	-	2000	For Complete Cl 6.3.1
Clause No -6.4(Adhesive)	-	9750	For Complete Cl 6.4
Clause No -7.1(Construction)	-	1000	For Complete Cl 7.1
Clause No - 7.3(" MDF board or HDF board ")	-	2000	For Complete Cl 7.3
Clause No -9.2("Workmanship and finish")	-	250	For complete cl 9.2
Clause No -10.1(tests for flush door shutters)	-	500	For complete Cl 10.1
Clause No -10.2(End Immersion Test)	-	1000	For Complete Cl 10.2
Clause No -10.3(Glue Adhesion Test)	-	750	For complete Cl 10.3
Clause No -11(SAMPLING AND CRITERIA FOR CONFORMITY)	-	250	For Complete Cl 11
Clause No -12("ADDITIONAL REQUIREMENTS FOR ECO MARK")	-	250	For Complete Cl 12
5(SIZES AND TOLERANCES)	-	5000	For complete cl 5
6.5(The swelling in thickness of the particle board, MDF and HDF board for core)	-	5000	For Complete Cl 6.5
Clause No - 6.1(Timber)	-	250	For Complete Cl 6.1
Clause No -6.2(Alternative Materials (LVL)	-	2000	For Complete Cl 6.2
Clause No -6.2(Alternative Materials veneer laminated lumber (VLL))	-	2000	For Complete Cl 6.2
Clause No -6.2(Alternative Materials medium density fibre board (MDF))	-	2000	For Complete Cl 6.2
Clause No -6.2(Alternative Materials -plywood)	-	250	For Complete Cl 6.2
Clause No -6.2(BWP grade flush door shutter)	-	2000	For Complete Cl 6.2
Clause No -6.3.1("Face Panels: Particle Board MDF/ HDF Fibre Hardboard")	-	2000	For Complete Cl 6.3.1
Clause No -6.4(Adhesive)	-	9750	For Complete Cl 6.4
Clause No -7.1(Construction)	-	1000	For Complete Cl 7.1
Clause No - 7.3(" MDF board or HDF board ")	-	2000	For Complete Cl 7.3
Clause No -9.2("Workmanship and finish")	-	250	For complete cl 9.2
Clause No -10.1(tests for flush door shutters)	-	500	For complete Cl 10.1
Clause No -10.2(End Immersion Test)	-	1000	For Complete Cl 10.2
Clause No -10.3(Glue Adhesion Test)	-	750	For complete Cl 10.3
Clause No -11(SAMPLING AND CRITERIA FOR CONFORMITY)	-	250	For Complete Cl 11
Clause No -12("ADDITIONAL REQUIREMENTS FOR ECO MARK")	-	250	For Complete Cl 12
5(SIZES AND TOLERANCES)	-	5000	For complete cl 5
6.5(The swelling in thickness of the particle board, MDF and HDF board for core)	-	5000	For Complete Cl 6.5

-
Included W.E.F. 05-04-2024.

9652

Conformity Testing Labs Pvt. Ltd. Unit 2 (A33)

8139626

IS 302 : Part 2 : Sec 7 (2024)

Safety of Household And Similar Electrical Appliances Part 2 Particular Requirements Section 7: Domestic Electric Clothes Washing Machines

90000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(GENERAL REQUIREMENT)	-	3000	-
6(CLASSIFICATION)	-	2000	-
7(MARKING AND INSTRUCTIONS)	-	3000	-
8(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	4000	-
10(POWER INPUT AND CURRENT)	-	7000	-
11(HEATING)	-	12000	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	8000	-
14(TRANSIENT OVERVOLTAGES)	-	6000	-
15(MOISTURE RESISTANCE)	-	15000	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	8000	-
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	5000	-
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	6000	-
18(ENDURANCE)	-	25000	-
19(ABNORMAL OPERATION)	-	10000	-
19.11.4.1(Electrostatic discharges)	-	10000	-
19.11.4.3(Fast transient bursts)	-	10000	-
19.11.4.4(Surge immunity test)	-	10000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	10000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	5000	-
21(MECHANICAL STRENGTH)	-	7000	-
22(CONSTRUCTION)	-	8000	-
23(INTERNAL WIRING)	-	6000	-
24(COMPONENTS)	-	5000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	6000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	6000	-
27(PROVISION FOR EARTHING)	-	6000	-
28(SCREWS AND CONNECTIONS)	-	5000	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	7000	-
30(RESISTANCE TO HEAT AND FIRE)	-	7000	-
31(RESISTANCE TO RUSTING)	-	5000	-
19.13(ABNORMAL OPERATION)	-	5000	-
19.101(Abnormal Operation)	-	5000	-
19.102(Abnormal Operation)	-	5000	-

05 Apr, 2027

-
Exclusion Cl 19.11.4.2 to Cl 19.11.4.7 24 (COMPONENTS)

9653

Central Institute of Petrochemicals Engineering and Technology (CIPET), BADDI

9163904

IS 18482 (2023)

Textiles - Sandwich extrusion laminated polypropylene PP woven sacks for packaging bulk commodities - Specification

With/Without liner ,With/Without UV stabilization

30951 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Sack Type)	-	0	-
5.2.1(Fabric)	-	2000	-
5.2.2(Linear density of tapes)	-	0	-
5.2.4(Unlaminated fabric mass)	-	0	-
5.3.1.1.1(Mass of BOPP film in sandwich extrusion lamination)	-	500	-
5.3.1.1.2(Polypropylene coating mass for sandwich extrusion lamination of BOPP film with base PP woven fabric)	-	0	-
5.3.1.1.3(Total mass of BOPP film laminated woven fabric)	-	0	-
5.3.1.2.1(Mass of nonwoven fabric in sandwich extrusion lamination)	-	0	-
5.3.1.2.2(Polypropylene coating mass for sandwich extrusion lamination of non woven fabric with base PP woven fabric)	-	0	-
5.3.1.2.3(The total mass of nonwoven laminated woven fabric)	-	0	-
5.4.1(Sack)	-	0	-
5.4.1.1(Centre seam)	-	1100	-
5.4.1.2(Bottom seam)	-	1100	-
5.4.2(Sack)	-	0	-
5.4.3(Sack)	-	0	-
5.4.5(Liner)	-	2000	-
6.1.1, Table 1(Inside length)	-	500	-
6.1.1, Table 1(Inside width)	-	0	-
6.1.1, Table 1(Gusset width)	-	0	-
6.1.1, Table 1(Warp per dm)	-	500	-
6.1.1, Table 1(Weft per dm)	-	0	-
6.1.1, Table 1(Mass of laminated fabric)	-	0	-
6.2, Table 1(Average breaking strength - Lengthwise)	-	1100	-
6.2, Table 1(Average breaking strength - Widthwise)	-	1100	-
6.2, Table 1(Breaking strength of bottom seam)	-	1100	-
6.2, Table 1(Breaking strength of centre seam)	-	1100	-
6.2, Table 1(Average elongation at break of fabric - Lengthwise)	-	0	-
6.2, Table 1(Average elongation at break of fabric - Widthwise)	-	0	-
6.3(Average breaking strength - Lengthwise after UV exposure)	-	1100	-
6.3(Average breaking strength - Widthwise after UV exposure)	-	1100	UV exposure test charges for 192 hours Rs. 10180
6.4(Drop Impact Testing of Filled Sacks)	-	1100	-
Clause 5.4.5.3("Free from pin holes (except for air removal perforations), patches, tears, blisters, and any other visible defects")	-	1000	-
Clause 6.2.2(Stitch strength)	-	0	-
Clause 6.2.2(Weld seam strength)	-	0	-
Clause 5.4.5.3("Free from pin holes (except for air removal perforations), patches, tears, blisters, and any other visible defects")	-	0	-
Clause 6.2.2(Stitch strength)	-	0	-
Clause 6.2.2(Weld seam strength)	-	0	-
Clause 6.5 Table 1 viii(Ash content)	-	1200	-

16 May, 2028

-
Included w.e.f. 20.08.2024

9654

LILABA ANALYTICAL LABORATORIES LLP, SURAT

7137216

IS 14543 (2024)

Packaged Drinking Water Other than Packaged Natural Mineral Water Specification Third Revision

200 ml,250 ml,300 ml,500 ml,750 ml,1L,2L,5L,10L,20L

18338 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.1(Escherichia Coli)	-	488	+18% GST
5.2.2(Coliform)	-	488	+18% GST
5.2.5(Pseudomonas aeruginosa)	-	375	+18% GST
5.2.8(Salmonella & Shigella)	-	676	+18% GST
5.2.3(Faecal Streptococci & Staphylococcus aureus)	-	826	+18% GST
5.2.4(Sulphite Reducing Anaerobes)	-	375	+18% GST
5.2.9(Vibrio Cholera & Vibrio parahaemolyicus)	-	676	+18% GST
5.2.7(Yeast & Mould)	-	338	+18% GST
5.2.6(Aerobic Microbial Count @ 22 o C & 37o C)	-	750	+18% GST
5.3/Table 1/i(Colour)	-	38	+18% GST
5.3/Table 1/ii(Odour)	-	38	+18% GST
5.3/Table 1/iii(Taste)	-	38	+18% GST
5.3/Table 1/iv(Turbidity)	-	38	+18% GST
5.3/Table 1/v(Total Dissolved Solids)	-	225	+18% GST
5.3/Table 1/vi(pH)	-	75	+18% GST
5.3/Table 2/v(Nitrate)	-	150	+18% GST
5.3/Table 2/i(Barium)	-	150	+18% GST
5.3/Table 2/ii(Copper)	-	150	+18% GST
5.3/Table 2/iii(Iron)	-	225	+18% GST
5.3/Table 2/iv(Maganese)	-	150	+18% GST
5.3/Table 2/vi(Nitrite)	-	150	+18% GST
5.3/Table 2/vii(Fluoride)	-	113	+18% GST
5.3/Table 2/viii(Zinc)	-	150	+18% GST
5.3/Table 2/ix(Silver)	-	150	+18% GST
5.3/Table 2/x(Aluminium)	-	225	+18% GST
5.3/Table 2/xi(Chloride)	-	75	+18% GST
5.3/Table 2/xii(Selenium)	-	263	+18% GST
5.3/Table 2/xiii(Suphate)	-	150	+18% GST
5.3/Table 2/xiv(Alkalinity)	-	75	+18% GST
5.3/Table 2/xv(Calcium)	-	38	+18% GST
5.3/Table 2/xvi(Magnesium)	-	38	+18% GST
5.3/Table 2/xvii(Sodium)	-	150	+18% GST
5.3/Table 2/xviii(Residual Free Chlorine)	-	413	+18% GST
5.3/Table 2/xix(Phenolic Compounds)	-	300	+18% GST
5.3/Table 2/xx(Mineral Oil)	-	300	+18% GST
5.3/Table 2/xxi(Anionic Surface- Active Agents as MBAS)	-	263	+18% GST
5.3/Table 2/xxii(Sulphide)	-	150	+18% GST
5.3/Table 2/xxiii(Antinomy)	-	263	+18% GST
5.3/Table 2/xxiv(Borates)	-	150	+18% GST
5.3/Table 2/xxxv(Bromate)	-	1875	+18% GST
5.3/Table 3/i(Mercury)	-	263	+18% GST
5.3/Table 3/ii(Cadmium)	-	150	+18% GST
5.3/Table 3/iii(Arsenic)	-	263	+18% GST
5.3/Table 3/iv(Cyanide)	-	300	+18% GST
5.3/Table 3/v(Lead)	-	150	+18% GST
5.3/Table 3/vi(Chromium)	-	150	+18% GST
5.3/Table 3/vii(Nickel)	-	150	+18% GST
5.3/Table 3/x(Uranium)	-	1500	+18% GST
5.4/Annex D/i(P,P-DDT)	-	75	+18% GST
5.4/Annex D/ii(Lindane)	-	75	+18% GST
5.4/Annex D/iv(b-Endosulfan)	-	75	+18% GST
5.4/Annex D/xvi(Dieldrin)	-	75	+18% GST
5.4/Annex D/xvi(Aldrin)	-	75	+18% GST
5.4/Annex D/i(O,P-DDT)	-	75	+18% GST
5.4/Annex D/iv(a-Endosulfan)	-	75	+18% GST
5.4/Annex D/iii(d-HCH)	-	75	+18% GST
5.4/Annex D/i(O,P-DDD)	-	75	+18% GST
5.4/Annex D/i(P,P-DDE)	-	75	+18% GST
5.4/Annex D/i(O,P-DDE)	-	75	+18% GST
5.4/Annex D/iii(a-HCH)	-	75	+18% GST
5.4/Annex D/iii(β- HCH)	-	75	+18% GST
5.4/Annex D/iv(Endosulfan sulfate)	-	75	+18% GST
5.4/Annex D/i(P,P-DDD)	-	75	+18% GST
5.4/Annex D/xii(Alachlor)	-	75	+18% GST
5.4/Annex D/vii(Chlorpyrifos)	-	75	+18% GST
5.4/Annex D/x(Butachlor)	-	75	+18% GST
5.4/Annex D/vi(Ethion)	-	75	+18% GST
5.4/Annex D/viii(Phorate sulphoxide)	-	75	+18% GST
5.4/Annex D/xiv(Methyl parathion)	-	75	+18% GST
5.4/Annex D/xv(Malathion)	-	75	+18% GST
5.4/Annex D/viii(Phorate)	-	75	+18% GST
5.4/Annex D/v(Monochrotophos)	-	75	+18% GST
5.4/Annex D/xiii(Atrazine)	-	75	+18% GST
5.4/Annex D/viii(Phorate sulfone)	-	75	+18% GST
5.4/Annex D/xxvii(Methyl paraoxon)	-	75	+18% GST
5.4/Annex D/xxviii(Malaoxon)	-	75	+18% GST
5.4/Annex D/xi(Isoproturon)	-	75	+18% GST
5.4/Annex D/ix(2,4 –D)	-	75	+18% GST
5.4/Annex D/xxxi(Total Pesticide Residue)	-	75	+18% GST
5.3(Appearance)	-	38	+18% GST
5.3/Table 3/ix(Polynuclear Aromatic Hydrocarbons)	-	750	+18% GST
5.3/Table 3/viii(Polyclorinated biphenyl (PCB))	-	750	+18% GST
Cl-5.1(General Requirements)	-	0	--
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	488	+18% GST
Cl-5.2.2(Coliform)	-	488	+18% GST
Cl-5.2.3(Staphylococcus aureus)	-	413	+18% GST
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	413	375
Cl-5.2.5(Pseudomonas Aeruginosa)	-	375	+18% GST
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	375	+18% GST
Cl-5.2.7(Yeast and mould)	-	375	+18% GST
Cl-5.2.8(Salmonella)	-	338	+18% GST
Cl-5.2.9(Vibrio cholera)	-	338	+18% GST
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	38	+18% GST
Cl-5.3, Table-1 (ii)(Odour)	-	38	+18% GST
Cl-5.3, Table-1 (iii)(Taste)	-	38	+18% GST
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	38	+18% GST
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	225	+18% GST
Cl-5.3, Table-1 (vi)(pH)	-	75	+18% GST
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	150	+18% GST
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	150	+18% GST
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	225	+18% GST
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	150	+18% GST
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	150	+18% GST
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	150	+18% GST
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	113	+18% GST
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	150	+18% GST
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	150	+18% GST
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	225	+18% GST
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	75	+18% GST
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	263	+18% GST
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	150	+18% GST
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	75	+18% GST
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	38	+18% GST
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	38	+18% GST
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	150	+18% GST
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	413	+18% GST
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	300	+18% GST
Cl-5.3, Table-2 (xx)(Mineral oil)	-	300	+18% GST
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	263	+18% GST
Cl-5.3, Table-2 (xxii)(Sulphide)	-	150	+18% GST
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	263	+18% GST
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	150	+18% GST
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	1875	+18% GST
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	263	+18% GST
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	150	+18% GST
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	263	+18% GST
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	300	+18% GST
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	150	+18% GST
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	150	+18% GST
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	150	+18% GST
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	750	+18% GST
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	750	+18% GST
Cl-5.3, Table-3 (x)(Uranium)	-	1500	+18% GST
Cl-5.4 (ii)(Total pesticide residue)	-	75	+18% GST
Cl-5.2.3(Faecal streptococci)	-	413	+18% GST
Cl-5.2.8(shigella)	-	338	+18% GST
Cl-5.2.9(V.parahaemolyticus)	-	338	+18% GST
Cl-5.4 (i)(Pesticide residues considered individually)	-	0	--
5.2.1(Escherichia Coli)	-	488	+18% GST
5.2.2(Coliform)	-	488	+18% GST
5.2.5(Pseudomonas aeruginosa)	-	375	+18% GST
5.2.8(Salmonella & Shigella)	-	676	+18% GST
5.2.3(Faecal Streptococci & Staphylococcus aureus)	-	826	+18% GST
5.2.4(Sulphite Reducing Anaerobes)	-	375	+18% GST
5.2.9(Vibrio Cholera & Vibrio parahaemolyicus)	-	676	+18% GST
5.2.7(Yeast & Mould)	-	338	+18% GST
5.2.6(Aerobic Microbial Count @ 22 o C & 37o C)	-	750	+18% GST
5.3/Table 1/i(Colour)	-	38	+18% GST
5.3/Table 1/ii(Odour)	-	38	+18% GST
5.3/Table 1/iii(Taste)	-	38	+18% GST
5.3/Table 1/iv(Turbidity)	-	38	+18% GST
5.3/Table 1/v(Total Dissolved Solids)	-	225	+18% GST
5.3/Table 1/vi(pH)	-	75	+18% GST
5.3/Table 2/v(Nitrate)	-	150	+18% GST
5.3/Table 2/i(Barium)	-	150	+18% GST
5.3/Table 2/ii(Copper)	-	150	+18% GST
5.3/Table 2/iii(Iron)	-	225	+18% GST
5.3/Table 2/iv(Maganese)	-	150	+18% GST
5.3/Table 2/vi(Nitrite)	-	150	+18% GST
5.3/Table 2/vii(Fluoride)	-	113	+18% GST
5.3/Table 2/viii(Zinc)	-	150	+18% GST
5.3/Table 2/ix(Silver)	-	150	+18% GST
5.3/Table 2/x(Aluminium)	-	225	+18% GST
5.3/Table 2/xi(Chloride)	-	75	+18% GST
5.3/Table 2/xii(Selenium)	-	263	+18% GST
5.3/Table 2/xiii(Suphate)	-	150	+18% GST
5.3/Table 2/xiv(Alkalinity)	-	75	+18% GST
5.3/Table 2/xv(Calcium)	-	38	+18% GST
5.3/Table 2/xvi(Magnesium)	-	38	+18% GST
5.3/Table 2/xvii(Sodium)	-	150	+18% GST
5.3/Table 2/xviii(Residual Free Chlorine)	-	413	+18% GST
5.3/Table 2/xix(Phenolic Compounds)	-	300	+18% GST
5.3/Table 2/xx(Mineral Oil)	-	300	+18% GST
5.3/Table 2/xxi(Anionic Surface- Active Agents as MBAS)	-	263	+18% GST
5.3/Table 2/xxii(Sulphide)	-	150	+18% GST
5.3/Table 2/xxiii(Antinomy)	-	263	+18% GST
5.3/Table 2/xxiv(Borates)	-	150	+18% GST
5.3/Table 2/xxxv(Bromate)	-	1875	+18% GST
5.3/Table 3/i(Mercury)	-	263	+18% GST
5.3/Table 3/ii(Cadmium)	-	150	+18% GST
5.3/Table 3/iii(Arsenic)	-	263	+18% GST
5.3/Table 3/iv(Cyanide)	-	300	+18% GST
5.3/Table 3/v(Lead)	-	150	+18% GST
5.3/Table 3/vi(Chromium)	-	150	+18% GST
5.3/Table 3/vii(Nickel)	-	150	+18% GST
5.3/Table 3/x(Uranium)	-	750	+18% GST
5.4/Annex D/i(P,P-DDT)	-	75	+18% GST
5.4/Annex D/ii(Lindane)	-	75	+18% GST
5.4/Annex D/iv(b-Endosulfan)	-	75	+18% GST
5.4/Annex D/xvi(Dieldrin)	-	75	+18% GST
5.4/Annex D/xvi(Aldrin)	-	75	+18% GST
5.4/Annex D/i(O,P-DDT)	-	75	+18% GST
5.4/Annex D/iv(a-Endosulfan)	-	75	+18% GST
5.4/Annex D/iii(d-HCH)	-	75	+18% GST
5.4/Annex D/i(O,P-DDD)	-	75	+18% GST
5.4/Annex D/i(P,P-DDE)	-	75	+18% GST
5.4/Annex D/i(O,P-DDE)	-	75	+18% GST
5.4/Annex D/iii(a-HCH)	-	75	+18% GST
5.4/Annex D/iii(β- HCH)	-	75	+18% GST
5.4/Annex D/iv(Endosulfan sulfate)	-	75	+18% GST
5.4/Annex D/i(P,P-DDD)	-	75	+18% GST
5.4/Annex D/xii(Alachlor)	-	75	+18% GST
5.4/Annex D/vii(Chlorpyrifos)	-	75	+18% GST
5.4/Annex D/x(Butachlor)	-	75	+18% GST
5.4/Annex D/vi(Ethion)	-	75	+18% GST
5.4/Annex D/viii(Phorate sulphoxide)	-	75	+18% GST
5.4/Annex D/xiv(Methyl parathion)	-	75	+18% GST
5.4/Annex D/xv(Malathion)	-	75	+18% GST
5.4/Annex D/viii(Phorate)	-	75	+18% GST
5.4/Annex D/v(Monochrotophos)	-	75	+18% GST
5.4/Annex D/xiii(Atrazine)	-	75	+18% GST
5.4/Annex D/viii(Phorate sulfone)	-	75	+18% GST
5.4/Annex D/xxvii(Methyl paraoxon)	-	75	+18% GST
5.4/Annex D/xxviii(Malaoxon)	-	75	+18% GST
5.4/Annex D/xi(Isoproturon)	-	75	+18% GST
5.4/Annex D/ix(2,4 –D)	-	75	+18% GST
5.4/Annex D/xxxi(Total Pesticide Residue)	-	75	+18% GST
5.3(Appearance)	-	38	+18% GST
5.3/Table 3/ix(Polynuclear Aromatic Hydrocarbons)	-	750	+18% GST
5.3/Table 3/viii(Polyclorinated biphenyl (PCB))	-	750	+18% GST
Cl-5.1(General Requirements)	-	0	+18% GST
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	488	+18% GST
Cl-5.2.2(Coliform)	-	488	+18% GST
Cl-5.2.3(Staphylococcus aureus)	-	413	+18% GST
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	375	+18% GST
Cl-5.2.5(Pseudomonas Aeruginosa)	-	375	+18% GST
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	375	+18% GST
Cl-5.2.7(Yeast and mould)	-	338	+18% GST
Cl-5.2.8(Salmonella)	-	338	+18% GST
Cl-5.2.9(Vibrio cholera)	-	338	+18% GST
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	38	+18% GST
Cl-5.3, Table-1 (ii)(Odour)	-	38	+18% GST
Cl-5.3, Table-1 (iii)(Taste)	-	38	+18% GST
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	38	+18% GST
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	225	+18% GST
Cl-5.3, Table-1 (vi)(pH)	-	75	+18% GST
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	150	+18% GST
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	150	+18% GST
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	225	+18% GST
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	150	+18% GST
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	150	+18% GST
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	150	+18% GST
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	113	+18% GST
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	150	+18% GST
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	150	+18% GST
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	225	+18% GST
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	75	+18% GST
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	263	+18% GST
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	150	+18% GST
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	75	+18% GST
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	38	+18% GST
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	38	+18% GST
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	150	+18% GST
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	413	+18% GST
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	300	+18% GST
Cl-5.3, Table-2 (xx)(Mineral oil)	-	300	+18% GST
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	263	+18% GST
Cl-5.3, Table-2 (xxii)(Sulphide)	-	150	+18% GST
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	263	+18% GST
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	150	+18% GST
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	1875	+18% GST
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	263	+18% GST
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	150	+18% GST
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	263	+18% GST
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	300	+18% GST
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	150	+18% GST
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	150	+18% GST
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	150	+18% GST
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	750	+18% GST
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	750	+18% GST
Cl-5.3, Table-3 (x)(Uranium)	-	1500	+18% GST
Cl-5.2.3(Faecal streptococci)	-	413	+18% GST
Cl-5.2.8(shigella)	-	338	+18% GST
Cl-5.2.9(V.parahaemolyticus)	-	338	+18% GST
Cl-5.4 (ii)(Total pesticide residue)	-	75	+18% GST
Cl-5.4 (i)(Pesticide residues considered individually)	-	0	+18% GST
5.2.1(Escherichia Coli)	-	-	-
5.2.2(Coliform)	-	-	-
5.2.5(Pseudomonas aeruginosa)	-	-	-
5.2.8(Salmonella & Shigella)	-	-	-
5.2.3(Faecal Streptococci & Staphylococcus aureus)	-	-	-
5.2.4(Sulphite Reducing Anaerobes)	-	-	-
5.2.9(Vibrio Cholera & Vibrio parahaemolyicus)	-	-	-
5.2.7(Yeast & Mould)	-	-	-
5.2.6(Aerobic Microbial Count @ 22 o C & 37o C)	-	-	-
5.3/Table 1/i(Colour)	-	-	-
5.3/Table 1/ii(Odour)	-	-	-
5.3/Table 1/iii(Taste)	-	-	-
5.3/Table 1/iv(Turbidity)	-	-	-
5.3/Table 1/v(Total Dissolved Solids)	-	-	-
5.3/Table 1/vi(pH)	-	-	-
5.3/Table 2/v(Nitrate)	-	-	-
5.3/Table 2/i(Barium)	-	-	-
5.3/Table 2/ii(Copper)	-	-	-
5.3/Table 2/iii(Iron)	-	-	-
5.3/Table 2/iv(Maganese)	-	-	-
5.3/Table 2/vi(Nitrite)	-	-	-
5.3/Table 2/vii(Fluoride)	-	-	-
5.3/Table 2/viii(Zinc)	-	-	-
5.3/Table 2/ix(Silver)	-	-	-
5.3/Table 2/x(Aluminium)	-	-	-
5.3/Table 2/xi(Chloride)	-	-	-
5.3/Table 2/xii(Selenium)	-	-	-
5.3/Table 2/xiii(Suphate)	-	-	-
5.3/Table 2/xiv(Alkalinity)	-	-	-
5.3/Table 2/xv(Calcium)	-	-	-
5.3/Table 2/xvi(Magnesium)	-	-	-
5.3/Table 2/xvii(Sodium)	-	-	-
5.3/Table 2/xviii(Residual Free Chlorine)	-	-	-
5.3/Table 2/xix(Phenolic Compounds)	-	-	-
5.3/Table 2/xx(Mineral Oil)	-	-	-
5.3/Table 2/xxi(Anionic Surface- Active Agents as MBAS)	-	-	-
5.3/Table 2/xxii(Sulphide)	-	-	-
5.3/Table 2/xxiii(Antinomy)	-	-	-
5.3/Table 2/xxiv(Borates)	-	-	-
5.3/Table 2/xxxv(Bromate)	-	-	-
5.3/Table 3/i(Mercury)	-	-	-
5.3/Table 3/ii(Cadmium)	-	-	-
5.3/Table 3/iii(Arsenic)	-	-	-
5.3/Table 3/iv(Cyanide)	-	-	-
5.3/Table 3/v(Lead)	-	-	-
5.3/Table 3/vi(Chromium)	-	-	-
5.3/Table 3/vii(Nickel)	-	-	-
5.3/Table 3/x(Uranium)	-	-	-
5.4/Annex D/i(P,P-DDT)	-	-	-
5.4/Annex D/ii(Lindane)	-	-	-
5.4/Annex D/iv(b-Endosulfan)	-	-	-
5.4/Annex D/xvi(Dieldrin)	-	-	-
5.4/Annex D/xvi(Aldrin)	-	-	-
5.4/Annex D/i(O,P-DDT)	-	-	-
5.4/Annex D/iv(a-Endosulfan)	-	-	-
5.4/Annex D/iii(d-HCH)	-	-	-
5.4/Annex D/i(O,P-DDD)	-	-	-
5.4/Annex D/i(P,P-DDE)	-	-	-
5.4/Annex D/i(O,P-DDE)	-	-	-
5.4/Annex D/iii(a-HCH)	-	-	-
5.4/Annex D/iii(β- HCH)	-	-	-
5.4/Annex D/iv(Endosulfan sulfate)	-	-	-
5.4/Annex D/i(P,P-DDD)	-	-	-
5.4/Annex D/xii(Alachlor)	-	-	-
5.4/Annex D/vii(Chlorpyrifos)	-	-	-
5.4/Annex D/x(Butachlor)	-	-	-
5.4/Annex D/vi(Ethion)	-	-	-
5.4/Annex D/viii(Phorate sulphoxide)	-	-	-
5.4/Annex D/xiv(Methyl parathion)	-	-	-
5.4/Annex D/xv(Malathion)	-	-	-
5.4/Annex D/viii(Phorate)	-	-	-
5.4/Annex D/v(Monochrotophos)	-	-	-
5.4/Annex D/xiii(Atrazine)	-	-	-
5.4/Annex D/viii(Phorate sulfone)	-	-	-
5.4/Annex D/xxvii(Methyl paraoxon)	-	-	-
5.4/Annex D/xxviii(Malaoxon)	-	-	-
5.4/Annex D/xi(Isoproturon)	-	-	-
5.4/Annex D/ix(2,4 –D)	-	-	-
5.4/Annex D/xxxi(Total Pesticide Residue)	-	-	-
5.3(Appearance)	-	-	-
5.3/Table 3/ix(Polynuclear Aromatic Hydrocarbons)	-	-	-
5.3/Table 3/viii(Polyclorinated biphenyl (PCB))	-	-	-
Cl-5.1(General Requirements)	-	-	-
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	-	-
Cl-5.2.2(Coliform)	-	-	-
Cl-5.2.3(Staphylococcus aureus)	-	-	-
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	-	-
Cl-5.2.5(Pseudomonas Aeruginosa)	-	-	-
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	-	-
Cl-5.2.7(Yeast and mould)	-	-	-
Cl-5.2.8(Salmonella)	-	-	-
Cl-5.2.9(Vibrio cholera)	-	-	-
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	-	-
Cl-5.3, Table-1 (ii)(Odour)	-	-	-
Cl-5.3, Table-1 (iii)(Taste)	-	-	-
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	-	-
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	-	-
Cl-5.3, Table-1 (vi)(pH)	-	-	-
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	-	-
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	-	-
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	-	-
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	-	-
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	-	-
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	-	-
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	-	-
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	-	-
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	-	-
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	-	-
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	-	-
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	-	-
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	-	-
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	-	-
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	-	-
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	-	-
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	-	-
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	-	-
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	-	-
Cl-5.3, Table-2 (xx)(Mineral oil)	-	-	-
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	-	-
Cl-5.3, Table-2 (xxii)(Sulphide)	-	-	-
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	-	-
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	-	-
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	-	-
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	-	-
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	-	-
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	-	-
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	-	-
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	-	-
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	-	-
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	-	-
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	-	-
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	-	-
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	-	-
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	-	-
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	-	-
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	-	-
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	-	-
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	-	-
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	-	-
Cl-5.3, Table-3 (x)(Uranium)	-	-	-
Cl-5.3, Table-3 (x)(Uranium)	-	-	-
Cl-5.2.3(Faecal streptococci)	-	-	-
Cl-5.2.8(shigella)	-	-	-
Cl-5.2.8(shigella)	-	-	-
Cl-5.2.9(V.parahaemolyticus)	-	-	-
Cl-5.2.9(V.parahaemolyticus)	-	-	-
Cl-5.4 (ii)(Total pesticide residue)	-	-	-
Cl-5.4 (ii)(Total pesticide residue)	-	-	-
Cl-5.4 (i)(Pesticide residues considered individually)	-	-	-
Cl-5.4 (i)(Pesticide residues considered individually)	-	-	-

11 Jun, 2029

-
Included w.e.f. 03.10.2024 Except: 5.3 Table-4 i (Alpha emitters), 5.3 Table-4 ii (Beta emitters)

9655

Central Institute of Petrochemicals Engineering & Technology (CIPET), Chandrapur

7173804

IS 17399 (2020)

Textiles - Polypropylene ( PP )/ High Density Polyethylene ( HDPE ) Laminated Woven Sacks for Mail Sorting, Storage, Transport and Distribution - Specification

35kg (Type I, II & III)

29780 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(MANUFACTURE - Raw Materials)	-	2000.0	GST charges Extra
5.2(MANUFACTURE - Fabric for PP tapes & for HDPE tapes)	-	2000.0	GST charges Extra
5.2- Table 1- i)("REQUIREMENTS - Inside dimensions a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm")	-	1500.0	(Bottom panel - 500.0, Open Top - 500.0 & Height - 500.0) (GST charges Extra)
5.2- Table 1- ii)(REQUIREMENTS - Ends per dm)	-	500.0	GST charges Extra
5.2- Table 1- iii)(REQUIREMENTS - Picks per dm)	-	500.0	GST charges Extra
5.2- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g)	-	500.0	GST charges Extra
5.2- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf) a) Lengthwise b) Widthwise)	-	3200.0	1100.0x2=2200.0 (Lengthwise & Widthwise) + 1000.0 - Specimen Preparation Charges) GST charges Extra
5.2- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min, N2), (kgf))	-	1100.0	GST charges Extra
5.2- Table 1- vii)("REQUIREMENTS - Elongation at break of fabric, percent: a) Lengthwise b) Widthwise")	-	0.00	-
5.2- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks)	-	1200.0	GST charges Extra
5.3(Lamination)	-	2000.0	GST charges Extra
5.4(Sack Fabrication)	-	500.0	GST charges Extra
5.5(Capacity)	-	500.0	GST charges Extra
6.1- Table 1- i)(REQUIREMENTS - Inside dimensions a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm)	-	0.00	-
6.1- Table 1- ii)(REQUIREMENTS - Ends per dm)	-	0.00	-
6.1- Table 1- iii)(REQUIREMENTS - Picks per dm)	-	0.00	-
6.1- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g)	-	0.00	-
6.1- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf))	-	0.00	-
6.1- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min)	-	0.00	-
6.1- Table 1- vii)(REQUIREMENTS - Elongation at break of fabric, percent a) Lengthwise b) Widthwise)	-	0.00	-
6.1- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks)	-	0.00	-
6.4(UV Resistance Test)	-	13380.0	UV Resistance- 10180.0 + breaking strength-3200.0 (Lengthwise-1100.0 & Widthwise-1100.0 +1000.0-Sample Preparation Charges) (GST charges Extra)
7(PRINTING, PACKAGING AND MARKING)	-	500.0	GST charges Extra
8(ATMOSPHERIC CONDITIONS FOR SAMPLE CONDITIONING AND TESTING)	-	400.0	GST charges Extra
Clause 5.1(Raw Materials)	-	0.00	-
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	0.00	-
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	0.00	-
"Clause 5.2 Table 1(ii)"(Ends per dm)	-	0.00	-
"Clause 5.2 Table 1(iii)"(Picks per dm)	-	0.00	-
"Clause 5.2 Table 1(iv)"("Mass of laminated sack, g")	-	0.00	-
"Clause 5.2 Table 1(v)"("Breaking strength of laminated fabric")	-	0.00	-
"Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam)	-	0.00	-
"Clause 5.2 Table 1(vii)"("Elongation at break of fabric, percent:")	-	0.00	-
"Clause 5.2 Table 1(viii)"("Ash content, Max, percent")	-	0.00	-
Clause 5.3(Lamination with a thin film of polypropylene)	-	0.00	-
Clause 5.4(Sack Fabrication)	-	0.00	-
Clause 5.1(Raw Materials)	-	0.00	-
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	0.00	-
"Clause 5.2 Table 1(ii)"(Ends per dm)	-	0.00	-
"Clause 5.2 Table 1(iii)"(Picks per dm)	-	0.00	-
"Clause 5.2 Table 1(iv)"("Mass of laminated sack, g")	-	0.00	-
"Clause 5.2 Table 1(v)"("Breaking strength of laminated fabric")	-	0.00	-
"Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam)	-	0.00	-
"Clause 5.2 Table 1(vii)"("Elongation at break of fabric, percent:")	-	0.00	-
"Clause 5.2 Table 1(viii)"("Ash content, Max, percent")	-	0.00	-
Clause 5.3(Lamination with a thin film of polypropylene)	-	0.00	-
Clause 7.3(Marking on Sacks)	-	0.00	-
Clause 7.3(Marking on Sacks)	-	0.00	-

10 Sep, 2029

-
Included w.e.f. 20.08.2024

9656

Central Institute of Petrochemicals Engineering and Technology (CIPET), BADDI

9163904

IS 17399 (2020)

Textiles - Polypropylene ( PP )/ High Density Polyethylene ( HDPE ) Laminated Woven Sacks for Mail Sorting, Storage, Transport and Distribution - Specification

SACK Type, With UV, Without UV

34505 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(MANUFACTURE - Raw Materials)	-	1050	-
5.2(MANUFACTURE - Fabric for PP tapes & for HDPE tapes)	-	1000	-
5.2- Table 1- i)("REQUIREMENTS - Inside dimensions a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm")	-	1500	-
5.2- Table 1- ii)(REQUIREMENTS - Ends per dm)	-	500	-
5.2- Table 1- iii)(REQUIREMENTS - Picks per dm)	-	500	-
5.2- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g)	-	500	-
5.2- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf) a) Lengthwise b) Widthwise)	-	2200	-
5.2- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min, N2), (kgf))	-	1100	-
5.2- Table 1- vii)("REQUIREMENTS - Elongation at break of fabric, percent: a) Lengthwise b) Widthwise")	-	0	-
5.2- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks)	-	1200	-
5.3(Lamination)	-	1000	-
5.4(Sack Fabrication)	-	1050	-
5.5(Capacity)	-	500	-
6.1- Table 1- i)(REQUIREMENTS - Inside dimensions a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm)	-	500	-
6.1- Table 1- ii)(REQUIREMENTS - Ends per dm)	-	500	-
6.1- Table 1- iii)(REQUIREMENTS - Picks per dm)	-	500	-
6.1- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g)	-	500	-
6.1- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf))	-	2200	-
6.1- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min)	-	1100	-
6.1- Table 1- vii)(REQUIREMENTS - Elongation at break of fabric, percent a) Lengthwise b) Widthwise)	-	1100	-
6.1- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks)	-	1200	-
6.4(UV Resistance Test)	-	10180	-
8(ATMOSPHERIC CONDITIONS FOR SAMPLE CONDITIONING AND TESTING)	-	0	-
Clause 5.1(Raw Materials)	-	0	-
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	0	-
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	0	-
"Clause 5.2 Table 1(ii)"(Ends per dm)	-	0	-
"Clause 5.2 Table 1(iii)"(Picks per dm)	-	0	-
"Clause 5.2 Table 1(iv)"("Mass of laminated sack, g")	-	0	-
"Clause 5.2 Table 1(v)"("Breaking strength of laminated fabric")	-	0	-
"Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam)	-	0	-
"Clause 5.2 Table 1(vii)"("Elongation at break of fabric, percent:")	-	0	-
"Clause 5.2 Table 1(viii)"("Ash content, Max, percent")	-	0	-
Clause 5.3(Lamination with a thin film of polypropylene)	-	0	-
Clause 5.4(Sack Fabrication)	-	0	-
Clause 5.1(Raw Materials)	-	0	-
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	0	-
"Clause 5.2 Table 1(ii)"(Ends per dm)	-	0	-
"Clause 5.2 Table 1(iii)"(Picks per dm)	-	0	-
"Clause 5.2 Table 1(iv)"("Mass of laminated sack, g")	-	0	-
"Clause 5.2 Table 1(v)"("Breaking strength of laminated fabric")	-	0	-
"Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam)	-	0	-
"Clause 5.2 Table 1(vii)"("Elongation at break of fabric, percent:")	-	0	-
"Clause 5.2 Table 1(viii)"("Ash content, Max, percent")	-	0	-
Clause 5.3(Lamination with a thin film of polypropylene)	-	0	-
Clause 7.3(Marking on Sacks)	-	0	-
Clause 7.3(Marking on Sacks)	-	0	-

16 May, 2028

-
Included w.e.f. 20.08.2024

9657

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 17399 (2020)

Textiles - Polypropylene ( PP )/ High Density Polyethylene ( HDPE ) Laminated Woven Sacks for Mail Sorting, Storage, Transport and Distribution - Specification

42280.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(MANUFACTURE - Raw Materials)	-	1050.00	-
5.2(MANUFACTURE - Fabric for PP tapes & for HDPE tapes)	-	7350.00	Fabric Fabric Construction 500 Tape Width 500 Identification (Chemical Analysis) 1050 Melt flow rate (MFR) 1100 Linear Density 700 Tanacity 1100 Elongation of the Tape Thickness of the Tape 500
5.2- Table 1- i)("REQUIREMENTS - Inside dimensions a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm")	-	500.00	-
5.2- Table 1- ii)(REQUIREMENTS - Ends per dm)	-	500.00	-
5.2- Table 1- iii)(REQUIREMENTS - Picks per dm)	-	500.00	-
5.2- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g)	-	500.00	-
5.2- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf) a) Lengthwise b) Widthwise)	-	2700.00	Avg. breaking strength of Fabric (min) a. Length wise 1100 500 b. Width wise 1100
5.2- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min, N2), (kgf))	-	1100.00	-
5.2- Table 1- vii)("REQUIREMENTS - Elongation at break of fabric, percent: a) Lengthwise b) Widthwise")	-	0.00	ALREADY CHARGE TAKEN.
5.2- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks)	-	1200.00	-
5.3(Lamination)	-	2050.00	Mass of lamination film 500 Total Mass of Laminated woven fabric 500 Material Identification of lamination 1050
5.4(Sack Fabrication)	-	1500.00	Sacks Construction 500 Gromet construction & dimensions 1000
5.5(Capacity)	-	500.00	-
6.1- Table 1- i)(REQUIREMENTS - Inside dimensions a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm)	-	1500.00	Inside dimensions a) Bottom panel (L × W), mm 500 b) Open top (L × W), mm 500 c) Height (H), mm 500
6.1- Table 1- ii)(REQUIREMENTS - Ends per dm)	-	0.00	ALREADY CHARGE TAKEN
6.1- Table 1- iii)(REQUIREMENTS - Picks per dm)	-	0.00	ALREADY CHARGE TAKEN
6.1- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g)	-	0.00	ALREADY CHARGE TAKEN
6.1- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf))	-	0.00	ALREADY CHARGE TAKEN
6.1- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min)	-	0.00	ALREADY CHARGE TAKEN
6.1- Table 1- vii)(REQUIREMENTS - Elongation at break of fabric, percent a) Lengthwise b) Widthwise)	-	0.00	ALREADY CHARGE TAKEN
6.1- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks)	-	0.00	ALREADY CHARGE TAKEN
6.4(UV Resistance Test)	-	10180.00	-
7(PRINTING, PACKAGING AND MARKING)	-	0.00	-
8(ATMOSPHERIC CONDITIONS FOR SAMPLE CONDITIONING AND TESTING)	-	0.00	-
Clause 5.1(Raw Materials)	-	0.00	ALREADY CHARGE TAKEN
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	0.00	ALREADY CHARGE TAKEN
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	0.00	ALREADY CHARGE TAKEN
"Clause 5.2 Table 1(ii)"(Ends per dm)	-	0.00	ALREADY CHARGE TAKEN
"Clause 5.2 Table 1(iii)"(Picks per dm)	-	0.00	ALREADY CHARGE TAKEN
"Clause 5.2 Table 1(iv)"("Mass of laminated sack, g")	-	0.00	ALREADY CHARGE TAKEN
"Clause 5.2 Table 1(v)"("Breaking strength of laminated fabric")	-	0.00	ALREADY CHARGE TAKEN
"Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam)	-	0.00	ALREADY CHARGE TAKEN
"Clause 5.2 Table 1(vii)"("Elongation at break of fabric, percent:")	-	0.00	ALREADY CHARGE TAKEN
"Clause 5.2 Table 1(viii)"("Ash content, Max, percent")	-	0.00	ALREADY CHARGE TAKEN
Clause 5.3(Lamination with a thin film of polypropylene)	-	0.00	ALREADY CHARGE TAKEN
Clause 5.4(Sack Fabrication)	-	0.00	ALREADY CHARGE TAKEN
Clause 7.3(Marking on Sacks)	-	0.00	ALREADY CHARGE TAKEN
Clause 5.1(Raw Materials)	-	0.00	ALREADY CHARGE TAKEN
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	0.00	ALREADY CHARGE TAKEN
"Clause 5.2 Table 1(ii)"(Ends per dm)	-	0.00	ALREADY CHARGE TAKEN
"Clause 5.2 Table 1(iii)"(Picks per dm)	-	0.00	ALREADY CHARGE TAKEN
"Clause 5.2 Table 1(iv)"("Mass of laminated sack, g")	-	0.00	ALREADY CHARGE TAKEN
"Clause 5.2 Table 1(v)"("Breaking strength of laminated fabric")	-	0.00	ALREADY CHARGE TAKEN
"Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam)	-	0.00	ALREADY CHARGE TAKEN
"Clause 5.2 Table 1(vii)"("Elongation at break of fabric, percent:")	-	0.00	ALREADY CHARGE TAKEN
"Clause 5.2 Table 1(viii)"("Ash content, Max, percent")	-	0.00	ALREADY CHARGE TAKEN
Clause 5.3(Lamination with a thin film of polypropylene)	-	0.00	ALREADY CHARGE TAKEN
Clause 7.3(Marking on Sacks)	-	0.00	ALREADY CHARGE TAKEN

24 Apr, 2027

-
Included w.e.f. 20.08.2024

9658

Central Institute of Petrochemicals Engineering & Technology (CIPET), Chandrapur

7173804

IS 16703 (2017)

Textiles - High density polyethylene (HDPE) polypropylene (PP) woven sacks for packaging of 25 kg polymer materials - Specification

25kg

26180.0 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Mass of Bale)	-	500.0	GST Charges Extra
5.2 Table 1(Dimensions)	-	500.0	GST Charges Extra
5.2 Table 1(Dimensions)	-	0.00	-
5.2 Table 1(Dimensions)	-	0.00	-
5.2 Table 1(Dimensions)	-	0.00	-
5.2 Table 1(Ends per dm)	-	500.0	GST Charges Extra
5.2 Table 1(Picks per dm)	-	500.0	GST Charges Extra
5.2 Table 1(Mass of sack, Gusseted type, g - IS 1964)	-	500.0	GST Charges Extra
5.2 Table 1(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N) (kgf): - IS 1969 (Part 1))	-	1600.0	Breaking Strength (Lengthwise)-1100.0 + 500.0 (Sample preparation charges) (GST Charges Extra)
5.2 Table 1(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N2) (kgf): - IS 1969 (Part 1))	-	1600.0	Breaking Strength (Widthwise)-1100.0 + 500.0 (Sample preparation charges) (GST Charges Extra)
5.2 Table 1(Breaking strength of bottom seam (Ravelled strip method), Min, N) (kgf) - IS 9030)	-	1600.0	Breaking Strength of Bottom Seam-1100.0+500.0 (Sample preparation charges) (GST Charges Extra)
5.2 Table 1(Elongation at break of fabric (Ravelled strip method), percent : IS 1969 (Part 1))	-	0.00	Elongation at break (Lengthwise)
5.2 Table 1(Elongation at break of fabric (Ravelled strip method), percent : IS 1969 (Part 1))	-	0.00	Elongation at break (Widthwise)
5.2 Table 1(Drop impact strength)	-	1600.0	Test Charges 1100.0 + 500.0 (Sample Preparation Charges) (GST Charges Extra)
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,a) For UV stabilized sacks)	-	1200.0	GST Charges Extra
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,b) For non- UV stabilized sacks)	-	0.00	-
4.6(Capacity)	-	500.0	GST Charges Extra
4.3.1(Bottom Seam)	-	500.0	GST Charges Extra
4.3(Sacks)	-	500.0	GST Charges Extra
4.2,5.1,5.2,5.3,5.4(Breaking strenght after U.V. Exposure (Warp/Weft))	-	3200.0	Test Charges 1100.0x2=2200.00(Lengthwise & Widthwise) + 1000.0 (Sample Preparation Charges-Lengthwise & Widthwise) (GST Charges Extra)
4.2,5.1,5.2,5.3,5.4,(UV Resistance (192 hrs)(100 x 65+92x40))	-	0.00	-
4.2(Linear Density)	-	700.0	GST Charges Extra
4.2(Width of tape)	-	500.0	GST Charges Extra
4.6(Capacity)	-	0.00	-
4.3.1(Bottom Seam)	-	0.00	-
4.3(Sacks)	-	0.00	-
4.2,5.1,5.2,5.3,5.4(Breaking strenght after U.V. Exposure (Warp/Weft))	-	0.00	-
4.2,5.1,5.2,5.3,5.4,(UV Resistance (192 hrs)(100 x 65+92x40))	-	10180.0	GST Charges Extra
4.2(Linear Density)	-	0.00	-
4.2(Width of tape)	-	0.00	-

10 Sep, 2029

-
Included w.e.f. 20.08.2024

9659

AANKAN CALIBRATION AND TESTING CENTRE LLP, DANTLI

7184406

IS 1659 (2004)

Block boards - Specification (Fourth Revision)

GRADE:BWP/MR,TYPE:DEC/COM,THICKNESS:30 mm Max.

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.2.6(Spot test - Annexure L)	-	1900	OK
9.2.5(Modulus of elasticity - MINIMUM INDIVIDUAL - Annexure K)	-	500	OK
9.2.5(Modulus of elasticity - AVERAGE - Annexure K)	-	500	OK
9.2.5(Modulus of rupture - MINIMUM INDIVIDUAL - Annexure K)	-	500	OK
9.2.5(Modulus of rupture - AVERAGE - Annexure K)	-	500	OK
9.2.4(Mycological Test [for MR grade only] - Annexure J)	-	1900	OK
9.2.3(Adhesion of Plies - Annexure H)	-	500	OK
9.2.2 (Resistance to water - Annexure G, Annexure H [For MR Grade])	-	500	OK
9.2.2 (Resistance to water - Annexure G, Annexure H [For BWP grade])	-	500	OK
9.2.1(Dimensional Changes caused by humidity Change in local planeness - Annexure F)	-	500	OK
9.2.1(Dimensional Changes caused by humidity - Delamination - Annexure F)	-	500	OK
9.2.1(Dimensional Changes caused by humidity - Change in thickness - at 40% RH - Annexure F)	-	500	OK
9.2.1(Dimensional Changes caused by humidity - Change in Thickness - at 90% RH - Annexure F)	-	500	OK
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 40% RH - Annexure F)	-	500	OK
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 90% RH - Annexure F)	-	500	OK
7.3(Dimensional Requirements - Variation in thickness - Annexure E)	-	200	OK
7.3(Dimensional Requirements - Squareness - Annexure D)	-	490	OK
7.3(Dimensional Requirements - Edge Straightness - Annexure D)	-	200	OK
7.3(Dimensional Requirements - Thickness - Annexure E)	-	200	OK
7.3(Dimensional Requirements - Width - 8.1.4)	-	200	OK
7.3(Dimensional Requirements - Length - 8.1.4)	-	200	OK
8.1.3, 6.3.3, IS 1328(Visual Inspection - Permissible Defects - IS 1328 [test method for DECORATIVE type])	-	200	OK
8.1.3, 6.3.3, IS 303(Visual Inspection - Permissible Defects - IS 303 [test method for COMMERCIAL type])	-	200	OK
9.2.6 (mechanical)(Spot test - Annexure L)	-	1900	OK
cl. 11(marking)	-	200	OK
cl. 11.1(marking - BIS certification marking)	-	100	OK
Cl-10(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	0	OK
6.2(Core- Moisture & Width)	-	0	OK
6.3(Cross Bands and Faces- Moisture content)	-	0	OK
6.3.1(Thickness of cross band and face veneers)	-	0	OK

-
-

9660

AANKAN CALIBRATION AND TESTING CENTRE LLP, DANTLI

7184406

IS 848 (2006)

Synthetic resin adhesives for plywood (Phenolic And Aminoplastic) - Specification (Second Revision)

TYPE:MR,BR,BWR, DESCRIPTION:LIQUID/POWDER/FILM

6967 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4 Table (i)(BWP (BOiling WaterProof))	-	4200	OK
4 Table (i)(BWR (Boiling Water Resistant))	-	4200	OK
4 Table (i)(MR (Moisture Ressistant))	-	4200	OK
5,7.4(Keeping Quality (Resistance to heat Polymerization))	-	0	0
7.4(Acidity and Alkalinity ( pH))	-	500	OK

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number