BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

11272 Results

S.No.

Lab Name

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

9691

Aforeserve Labs Private Limited

IS 302 : Part 2 : Sec 25 (2014)

Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 25 Microwave ovens

Rs.58,500/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	1458	N/A
7(Marking and instructions)	-	1458	N/A
8(Protection against live parts)	-	1458	N/A
10(POWER INPUT AND CURRENT)	-	1458	N/A
11(HEATING)	-	1458	N/A
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	1458	N/A
14(IMPULSE VOLTAGE TEST)	-	1458	N/A
15(HUMIDITY TREATMENT TEST)	-	1458	N/A
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	1458	N/A
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	1458	N/A
18(ENDURANCE)	-	1458	N/A
19(ABNORMAL OPERATION)	-	1458	N/A
21(MECHANICAL STRENGTH)	-	1458	N/A
22(CONSTRUCTION)	-	1458	N/A
23(INTERNAL WIRING)	-	1458	N/A
24(COMPONENTS)	-	0	N/A
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	1458	N/A
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	1458	N/A
27(PROVISION FOR EARTHING)	-	1458	N/A
28(SCREWS AND CONNECTIONS)	-	1458	N/A
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	1458	N/A
30(RESISTANCE TO HEAT AND FIRE)	-	1458	N/A
31(RESISTANCE TO RUSTING)	-	1458	N/A
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	1466	N/A
20(STABILITY AND MECHANICAL HAZARDS)	-	1458	N/A

06 Jun, 2027

-
EMI/EMC (Cl.19.11.4.1 to 19.11.4.7), Interlock (Cl.22.106), Component (Cl.24), critical components, magnetron, HV transformer capacitor diode, capacitor & RC units RF suppression, X-y capacitor, PCB material, inductor, SMPS transformer, MOV/VDR, relays, power cord, thermal cut-out/thermostat appliance connector/ inlet door interlock switches, enclosure insulation material, bridging resistor.

9692

DELHI TEST HOUSE, Azadhpur

IS 544 (2014)

Groundnut oil - Specification (Third Revision)

22500 View breakup
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.24600.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Description)	-	200	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.7 (Table 1, S. no i)(Moisture and insoluble impurities)	-	750	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.7 (Table 1, S. no ii)(Colour on the Lovibond scal)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.7 (Table 1, S. no iii)(Refractive index)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.7 (Table 1, S. no iv)(Specific gravity)	-	750	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.7 (Table 1, S. no v)(Saponification value)	-	750	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.7 (Table 1, S. no vi)(Iodine value)	-	750	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.7(Table 1, S. no vii)(Acid value)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.7 (Table 1, S. no viii)(Unsaponifiable matter)	-	750	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.7 (Table 1, S. no ix)(Flash point Pensky-Martens)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.7 (Table 1, S. no x)(Hexane)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.7 (Table 1, S. no xi)(Bellier turbidity)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.8.1.3 (Table 2, S. no i)(Lead)	-	400	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.8.1.3 (Table 2, S. no ii)(Arsenic)	-	400	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.8.1.3 (Table 2, S. no iii)(Cadmium)	-	400	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.8.1.3 (Table 2, S. no iv)(Mercury)	-	400	For BIS samples: 1.5 times of BIS testing charges
Cl. 7(MARKING)	-	100	For BIS samples: 1.5 times of BIS testing charges

-
-

9693

DELHI TEST HOUSE, Azadhpur

IS 546 (2014)

Mustard oil - Specification (Third Revision)

24600 View breakup
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.7000.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Description)	-	300	For BIS samples: 1.5 times of BIS testing charges
5.7 Table-1(Moisture and Insoluble Impurities)	-	750	For BIS samples: 1.5 times of BIS testing charges
5.7 Table-1(Colour on Lovibond Scale)	-	500	For BIS samples: 1.5 times of BIS testing charges
5.7 Table-1(Refractive Index at 40 degree )	-	500	For BIS samples: 1.5 times of BIS testing charges
5.7 Table-1(Saponification Value)	-	750	For BIS samples: 1.5 times of BIS testing charges
5.7 Table-1(Iodine Value)	-	750	For BIS samples: 1.5 times of BIS testing charges
5.7 Table-1(Acid Value)	-	500	For BIS samples: 1.5 times of BIS testing charges
5.7 Table-1(Unsaponifiable Matter)	-	750	For BIS samples: 1.5 times of BIS testing charges
5.7 Table-1(Natural Essential Oils)	-	500	For BIS samples: 1.5 times of BIS testing charges
5.7 Table-1(Bellier Turbidity temperature)	-	500	For BIS samples: 1.5 times of BIS testing charges
5.7 Table-1(Flash Point Pensky Martens)	-	500	For BIS samples: 1.5 times of BIS testing charges
5.7 Table-1(Hexane)	-	500	For BIS samples: 1.5 times of BIS testing charges
5.7 Table-1(Polybromide Test)	-	500	For BIS samples: 1.5 times of BIS testing charges
5.8.1.3 Table-2(Lead)	-	400	For BIS samples: 1.5 times of BIS testing charges
5.8.1.3 Table-2(Arsenic)	-	400	For BIS samples: 1.5 times of BIS testing charges
5.8.1.3 Table-2(Cadmium)	-	400	For BIS samples: 1.5 times of BIS testing charges
5.8.1.3 Table-2(Mercury (Total))	-	400	For BIS samples: 1.5 times of BIS testing charges

-
-

9694

AADCO TESTING & RESEARCH LABORATORY PVT LTD

IS 1161 (2014)

Steel tubes for structural purposes - Specification (Fifth Revision)

ALL TYPES

3025 View breakup
Rs.1150/- for Mechanical Tests (up to & including 50 mm NB), Rs.1750/- for Mechanical Tests (Above 50 mm NB) Rs.1275/- for Chemical Tests, Rs.2425/- for Complete Tests (up to & including 50 mm NB) Rs.3025/- for Complete Tests (Above 50 mm NB) 10% discount to BIS

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	1050	Rs. 650/- up to and including 50 mm NB
Cl 6(Outer Diameter, Thickness & Mass)	-	500	Rs. 300/- up to and including 50 mm NB
Cl 7(Workmanship)	-	200	-
Clause - 5.1, Table-3( CARBON)	-	200	-
Clause - 5.1, Table-3(SULPHUR)	-	150	-
Clause - 5.1, Table-3(PHOSPHURS)	-	150	-
Clause - 5.1, Table-3(MANGANESE)	-	200	-
5 AND AS PER IS 10748(CARBON EQUIVALENT)	-	150	-
8 AND AS PER IS 4736(MASS OF ZINC COATING)	-	225	-
8 AND AS PER IS 4736(UNIFORMITY OF ZINC COATING)	-	200	-

26 Jul, 2027

-
-

9695

National Test House (NR)

IS 1180 : Part 1 (2014)

Outdoor Type Oil Immersed Distribution Transformers Upto and Including 2 500 kVA, 33kV - Specification Part 1 Mineral Oil Immersed (Fourth Revision)

Distribution Transformers 11 KV upto 2500 KVA Rating

105000 View breakup
Rs.48000/- for rating upt 100 kVA, Rs.75000/- for rating 101 kVA to 200kVA, Rs.85000/- for rating 201 kVA to 500 kVA, Rs.95000/- for rating 501 kVA to 1000 kVA, Rs.1,05,000/- for rating 1001 kVA to 2500 kVA

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
21.2 e)(Measurement of insulation resistance)	-	500	-
13.1(Marking (Rating Plates))	-	0	-
13.2(Terminal Marking Plate)	-	0	-
13.3(Marking )	-	0	-
13.4(Marking)	-	0.00	-
13.4.1(Marking)	-	0.00	-
14.1(MOUNTING ARRANGEMENT)	-	0	-
14.2(MOUNTING ARRANGEMENT)	-	0	-
14.3(MOUNTING ARRANGEMENT)	-	0	-
14.4(MOUNTING ARRANGEMENT)	-	0	-
15.1.1(TRANSFORMER TANK : Construction)	-	0	-
15.1.2(TRANSFORMER TANK : Construction)	-	0	-
15.1.3(TRANSFORMER TANK : Construction)	-	0	-
15.1.4(TRANSFORMER TANK : Construction)	-	0	-
15.1.5(TRANSFORMER TANK : Construction)	-	0	-
17( ABILITY OF TRANSFORMERS TO WITHSTAND EXTERNAL SHORT CIRCUIT )	-	0	-
21.2 a)(Measurement of winding resistance )	-	1000	-
21.2 b)( Measurement of voltage ratio and check of phase displacemen)	-	1000	-
21.2 c)( Measurement of short-circuit impedance (principal tapping, when applicable) and load loss at 50 percent and 100 percent load)	-	5000	-
21.2 d)(Measurement of no-load loss and current)	-	5000	-
21.2 f)(Induced over-voltage withstand test)	-	1000	-
21.2 g)( Separate-source voltage withstand test)	-	1000	-
21.3(a )(Lightning impulse test)	-	35000	-
21.5.3.3(Oil leakage test)	-	2000	-
21.3(b)(Temperature-rise test)	-	25000	-
21.3(c)(Short-circuit withstand test)	-	0	-
21.4 a)( Determination of sound levels)	-	2000	-
21.5.1.1(Pressure test-Type test (For Transformers up to 200 kVA ))	-	6000	-
21.5.1.2(Pressure test-routine test (For Transformers up to 200 kVA ))	-	3000	-
21.5.2.1(Type test : For Transformers Above 200 kVA and Up to Including 2 500 kVA)	-	0	-
21.5.2.2(routine test :For Transformers Above 200 kVA and Up to Including 2 500 kVA)	-	0	-
21.5.2.3( Oil leakage test (routine test))	-	2000	-
21.5.3.1(For Single Phase Distribution Transformers Up to Including 25 kVA : pressure test (type test))	-	0	-
21.5.3.2(For Single Phase Distribution Transformers Up to Including 25 kVA : pressure test (routine test))	-	0	-
21.5.3.3(Oil leakage test (routine test))	-	2000	-
21.4 b(Short-circuit withstand test IS 2026 (Part 5) (above 200 kVA))	-	0	-
21.4 c(No load current at 112.5 percent voltage.)	-	2500	-
21.4 d(Paint adhesion tests)	-	1000	-
21.4 e(BDV and moisture content of oil in the transformer)	-	4000	-
6.9, 7.9, 8.9(Permissible Flux Density and Over Fluxing)	-	6000	-
11(Minimum clearance in Air)	-	0	-
16(Conservator for Non-sealed type Transformers)	-	0	-
20(Fittings)	-	0	-
15.5(Total Dry Film Paint Thickness)	-	0	-

26 Oct, 2025

-
Excluding: Short Curcuit test as per Cl.21.4(b)

9696

DELHI TEST HOUSE, Azadhpur

IS 3448 (2014)

Rice bran oil - Specification (Third Revision)

20150 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Description)	-	200	N.A.
5.2(Clarity and adulteration)	-	2900	N.A.
5.3(Non-edible oils presence)	-	2400	N.A.
5.4(aflatoxin)	-	1000	N.A.
5.5(Metal contaminants and pesticide residues)	-	2400	N.A.
5.6(permitted antioxidants and antioxidant synergists)	-	1200	N.A.
5.7, Table 1(Moisture and insoluble impurities)	-	750	N.A.
5.7, Table 1(Colour in a 1 inch cell on the Lovibond scale, expressed as (Y + 5R))	-	400	N.A.
5.7, Table 1(Refractive index at 40ºC)	-	500	N.A.
5.7, Table 1(Specific gravity at 30º/30ºC)	-	500	N.A.
5.7, Table 1(Saponification value)	-	750	N.A.
5.7, Table 1(Iodine value (Wijs)	-	750	N.A.
5.7, Table 1(Acid value)	-	500	N.A.
5.7, Table 1(Unsaponifiable matter,)	-	500	N.A.
5.7, Table 1(Flash point Pensky-Martens (closed), ºC)	-	500	N.A.
5.7, Table 1(Hexane)	-	500	N.A.
5.7, Table 1(Oryzanol,)	-	500	N.A.
5.8.1.2(aflatoxin)	-	1500	N.A.
5.8.1.3, Table 2(Pb)	-	300	N.A.
5.8.1.3, Table 2(As)	-	300	N.A.
5.8.1.3, Table 2(Cd)	-	300	N.A.
5.8.1.3, Table 2(Hg)	-	300	N.A.

-
Exclusion: Cl 5.8 (Optional Requirements for ECO-Mark)

9697

DELHI TEST HOUSE, Azadhpur

IS 4276 (2014)

Soybean oil - Specification (Second Revision)

23950 View breakup
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.23950.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5.1(Description)	-	62.50	For BIS samples: 1.5 times of BIS testing charges
Cl.5.1.1(Description)	-	62.50	For BIS samples: 1.5 times of BIS testing charges
Cl.5.2(Description)	-	62.50	For BIS samples: 1.5 times of BIS testing charges
Cl.5.2.1(Description)	-	62.50	For BIS samples: 1.5 times of BIS testing charges
Cl.5.7, Table-1, S. No. i)(Moisture and insoluble impurities, percent by mass, Max)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl.5.7, Table-1, S. No. ii)(Colour on the Lovibond scale, expressed as (Y + 5R) not deeper than)	-	250	For BIS samples: 1.5 times of BIS testing charges
Cl.5.7, Table-1, S. No. iii)(Refractive index at 40ºC)	-	250	For BIS samples: 1.5 times of BIS testing charges
Cl.5.7, Table-1, S. No. iv)(Saponification value)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl.5.7, Table-1, S. No. v)(Iodine value (Wijs))	-	750	For BIS samples: 1.5 times of BIS testing charges
Cl.5.7, Table-1, S. No. vi)(Acid value, Max)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl.5.7, Table-1, S. No.vii)(Unsaponifiable matter, percent by mass, Max)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl.5.7, Table-1, S. No.viii)(Flash point Pensky-Martens (closed), ºC, Min)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl.5.7, Table-1, S. No. ix)(Hexane, ppm, Max)	-	200	For BIS samples: 1.5 times of BIS testing charges
Cl.5.7, Table-1, S. No. x)(Phosphorous content, ppm, Max)	-	200	For BIS samples: 1.5 times of BIS testing charges
Cl.5.7, Table-1, S. No. xi)(Insoluble bromide test)	-	200	For BIS samples: 1.5 times of BIS testing charges
Cl.5.8.1.3, Table-2, S. No.i)(Lead, mg/kg, Max)	-	200	For BIS samples: 1.5 times of BIS testing charges
Cl.5.8.1.3, Table-2, S. No.ii)(Arsenic, mg/kg, Max)	-	200	For BIS samples: 1.5 times of BIS testing charges
Cl.5.8.1.3, Table-2, S. No.iii)(Cadmium, mg/kg, Max)	-	200	For BIS samples: 1.5 times of BIS testing charges
Cl.5.8.1.3, Table-2, S. No.iv)(Mercury (total) mg/kg, Max)	-	200	For BIS samples: 1.5 times of BIS testing charges

-
Exclusion: Cl.5.8.1 (Optional Requirements for ECO-Mark), Cl.5.8.1.1 (Optional Requirements for ECO-Mark), Cl.5.8.1.2 (Optional Requirements for ECO-Mark)

9698

DELHI TEST HOUSE, Azadhpur

IS 4277 (2014)

Sunflower oil - Specification (Second Revision)

19400 View breakup
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.19400.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5.1(Description)	-	62.50	For BIS samples: 1.5 times of BIS testing charges
Cl.5.1.1(Description)	-	62.50	For BIS samples: 1.5 times of BIS testing charges
Cl.5.2(Description)	-	62.50	For BIS samples: 1.5 times of BIS testing charges
Cl.5.2.1(Description)	-	62.50	For BIS samples: 1.5 times of BIS testing charges
Cl.5.3(Description)	-	6750	For BIS samples: 1.5 times of BIS testing charges
Cl.5.4(Description)	-	1000	For BIS samples: 1.5 times of BIS testing charges
Cl.5.5(Description)	-	3600	For BIS samples: 1.5 times of BIS testing charges
Cl.5.6(Description)	-	1300	For BIS samples: 1.5 times of BIS testing charges
Cl.5.7, Table-1, S. No. i)(Moisture and insoluble impurities, percent by mass, Max)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl.5.7, Table-1, S. No. ii)(Colour on the Lovibond scale, expressed as (Y + 5R) not deeper than)	-	250	For BIS samples: 1.5 times of BIS testing charges
Cl.5.7, Table-1, S. No. iii)(Refractive index at 40ºC)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl.5.7, Table-1, S. No. iv)(Saponification value)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl.5.7, Table-1, S. No. v)(Iodine value (Wijs))	-	750	For BIS samples: 1.5 times of BIS testing charges
Cl.5.7, Table-1, S. No. vi)(Acid value, Max)	-	400	For BIS samples: 1.5 times of BIS testing charges
Cl.5.7, Table-1, S. No.viii)(Flash point Pensky-Martens (closed), ºC, Min)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl.5.7, Table-1, S. No. ix)(Hexane, ppm, Max)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl.5.8.1.3, Table-2, S. No.i)(Lead, mg/kg, Max)	-	300	For BIS samples: 1.5 times of BIS testing charges
Cl.5.8.1.3, Table-2, S. No.ii)(Arsenic, mg/kg, Max)	-	300	For BIS samples: 1.5 times of BIS testing charges
Cl.5.8.1.3, Table-2, S. No.iii)(Cadmium, mg/kg, Max)	-	300	For BIS samples: 1.5 times of BIS testing charges
Cl.5.8.1.3, Table-2, S. No.iv)(Mercury (total) mg/kg, Max)	-	300	For BIS samples: 1.5 times of BIS testing charges

-
Exclusion: Cl.5.8.1 (Optional Requirements for ECO-Mark), Cl.5.8.1.1 (Optional Requirements for ECO-Mark), Cl.5.8.1.2 (Optional Requirements for ECO-Mark)

9699

CIPET, Jaipur

IS 5175 (2014)

Fibre ropes – Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high- tenacity multifilament (PP3) – 3-, 4-, 8- and 12-strand ropes (third revision)

All

6300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4( Designation)	-	0	-
Cl 5(General Requirements)	-	3950	Yarn (Identification) Chemical Analysis, Construction (Visual), Structure (Visual), Treatment U.V. Inhibitor/Stablilzer Indfentification by FTIR method & Rope (Visual) (1050+300+300+2000+300)
Cl 6 & Table 1,2 or 3(Reference Number.)	-	500	Mass per coil & pitch ( 250+250)
Cl 6 & Table 1,2 or 3(Linear Density)	-	500	-
Cl 6 & Table 1,2 or 3(Breaking Force)	-	1100	-
7.0 (Cl. 7.1) of ISO 9554: 2010 (Marking )	-	250	-
6.0 (Cl. 6 & 8.1 of IS:7071 Pt -1 to 4) (Pitch (Length of Lay) in mm)	-	250	-
5.2 (Cl. 4.4.2) of ISO 9554: 2010 (Workmanship)	-	250	-
5.2 (Cl. 4.4.1) of ISO 9554: 2010(Workmanship)	-	250	-
5.2 (Cl. 4.3) of ISO 9554: 2010 (Treatment )	-	2000	-
5.2 (Cl. 4.2) of ISO 9554: 2010 (Structure of rope)	-	300	-
5.2 (Cl. 4.2) of ISO 9554: 2010 (No. of Yarns in rope )	-	0	-
5.2 (Cl. 4.2) of ISO 9554: 2010 (Construction & Structure )	-	0	-
5.2 Cl. 4.1 (b) of ISO 9554: 2010 (Constituent Materials As per )	-	1050	-

21 Feb, 2026

-
-

9700

DELHI TEST HOUSE, Azadhpur

IS 8361 (2014)

Palmolein - Specification (First Revision)

19500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.1(Clarity of material)	-	200	-
5.3(non-edible oils and adulterants)	-	3000	-
5.4(aflatoxin)	-	1500	-
5.5(Metal contaminants and pesticide residues)	-	3300	-
5.7, Table 1(Moisture and insoluble impurities)	-	500	-
5.7, Table 1(Colour in a 5¼ inch cell on the Lovibond scale)	-	250	-
5.7, Table 1(Refractive index at 40ºC)	-	500	-
5.7, Table 1(Saponification value)	-	500	-
5.7, Table 1(Iodine value)	-	750	-
5.7, Table 1(Acid value)	-	300	-
5.7, Table 1(Unsaponifiable matter)	-	300	-
5.7, Table 1(Peroxide value)	-	500	-
5.7, Table 1(Cloud point)	-	500	-
5.7, Table 1(Hexane)	-	1500	-
5.7, Table 1(Flash point Pensky-Martens (closed))	-	300	-
5.7, Table 1(B.R. Reading at 40°C)	-	300	-
5.2(adultrants)	-	2800	-
5.6(permitted antioxidants)	-	1500	-

-
-

9701

Research & Development Centre for Bicycle and Sewing Machine

IS 10613 (2014)

Cycles - Safety requirements for bicycles (Second Revision)

199000 View breakup
Rs.1,99,000/-, Rs.4900/- (Optional) + GST @18%

Clause No.	Exclusion	Remark
4.2.1(Braking Systems)	-	+ Rs. 4900(optional)
4.2.2.2(Brake lever dimensions)	-	-
4.2.5.1(Braking under dry conditions)	-	-
4.2.5.2(Braking under wet conditions)	-	-
4.3.3(Expander Bolt for Handlebar Stem)	-	-
4.3.6(Fatigue Test on Handlebar and Stem Assembly)	-	-
4.4.1(Impact Test (Falling Mass))	-	-
4.4.2(Impact Test (Falling Frame-Fork Assembly))	-	-
4.5.2(Fatigue Strength of Fork)	-	-
4.6.3(Static Load Test)	-	-
4.8.2.1(Pedal Clearance, Ground clearance)	-	-
4.8.2.2(Toe clearance)	-	-
4.8.3(Drive System Static Load Test)	-	-
4.8.4(Pedal Dynamic Durability Test)	-	-
4.8.5(Fatigue Test on Crank Assembly)	-	-
4.9.6(Fatigue Test on Saddle Pillar)	-	-
4.14.1(Rear Reflectors)	-	-
4.14.2(Side Reflectors)	-	-
4.14.3(Front Reflectors)	-	-
4.14.4(Pedal Reflectors)	-	-
5.1(Road Test)	-	-

31 Dec, 2026

-
INCLUDED W.E.F. 31-08-2020

9702

DELHI TEST HOUSE, Azadhpur

IS 13334 : Part 2 (2014)

Skimmed milk powder - Specification: Part 2 extra grade (First Revision)

8400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table 1 (i)(Moisture (IS 116231or 16072))	-	500	-
Table 1 (ii)(Milk protein in milk solids not fat (IS 72192))	-	500	-
Table 1 (iii)(Milk fat (IS 117213) or Annex B)	-	500	-
Table 1 (iv)(Insolubility index (IS 12759))	-	500	-
Table 1 (v)(Total ash (on dry basis), Annex B of IS 14433)	-	500	-
Table 1 (vi)(Titratable acidity (IS 11766))	-	500	-
Table 1 (vii)(Lactate content (IS 11202))	-	500	-
Table 1 (viii)(Scorched particles (equivalent to Disc B) (IS 13500))	-	500	-
Table 1 (ix)(Bacterial count (IS 5402))	-	500	-
Table 1 (x)(Coliform count (IS 5401 - Part 1))	-	500	-
Table 1 (xi)(Escherichia coli (IS 5887 - Part 1))	-	500	-
Table 1 (xii)(Coagulase positive Staphylococcus aureus (IS 5887 - Part 2))	-	500	-
Table 1 (xiii)(Salmonella (IS 5887 - Part 3))	-	500	-
Table 1 (xiv)(a)(Spore Count: a)Aerobic (Bacillus cereus) Type m (IS 5887 - Part 6))	-	250	-
Table 1 (xiv)(b)(Spore Count: b) Anaerobic (Sulfite reducing Clostridia) Type m (ISO 15213 : 2003))	-	250	-
Table 1 (xv)(Listeria monocytogenes (IS 14988 - Part 2 : 2001))	-	500	-

-
Exclusion: Cl 5.3

9703

AGSS ANALYTICAL AND RESEARCH LAB PVT LTD

IS 13334 : Part 2 (2014)

Skimmed milk powder - Specification: Part 2 extra grade (First Revision)

9600 View breakup
(10% discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table 1 (i)(Moisture (IS 116231or 16072))	-	500	-
Table 1 (ii)(Milk protein in milk solids not fat (IS 72192))	-	500	-
Table 1 (iii)(Milk fat (IS 117213) or Annex B)	-	550	-
Table 1 (iv)(Insolubility index (IS 12759))	-	550	-
Table 1 (v)(Total ash (on dry basis), Annex B of IS 14433)	-	350	-
Table 1 (vi)(Titratable acidity (IS 11766))	-	500	-
Table 1 (vii)(Lactate content (IS 11202))	-	650	-
Table 1 (viii)(Scorched particles (equivalent to Disc B) (IS 13500))	-	600	-
Table 1 (ix)(Bacterial count (IS 5402))	-	600	-
Table 1 (x)(Coliform count (IS 5401 - Part 1))	-	700	-
Table 1 (xi)(Escherichia coli (IS 5887 - Part 1))	-	700	-
Table 1 (xii)(Coagulase positive Staphylococcus aureus (IS 5887 - Part 2))	-	700	-
Table 1 (xiii)(Salmonella (IS 5887 - Part 3))	-	700	-
Table 1 (xiv)(a)(Spore Count: a)Aerobic (Bacillus cereus) Type m (IS 5887 - Part 6))	-	625	-
Table 1 (xiv)(b)(Spore Count: b) Anaerobic (Sulfite reducing Clostridia) Type m (ISO 15213 : 2003))	-	625	-
Table 1 (xv)(Listeria monocytogenes (IS 14988 - Part 2 : 2001))	-	500	-
Clause no 5.4(Flavour)	-	300	-
Clause no 5.2(freedom from extraneous matter)	-	300	-
Clause no 4(Description)	-	300	-

13 Jan, 2027

-
-

9704

CIPET, Jaipur

IS 14887 (2014)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision)

PE & PP All

25080 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Tapes – Width and Thickness ( IS 6192/IS 11197))	-	250	-
3.2(Tapes – Linear Density (IS 6192/IS 11197))	-	500	-
3.2(Tapes – Tenacity (IS 6192/IS 11197))	-	250	-
3.2(Tapes – Elongation at point of rupture (IS 6192/IS 11197))	-	1100	-
3.2(Tapes – Heat Shrinkage (HDPE) (Cl. 3.2 and IS 6192))	-	0	-
3.2(Tapes – Colour Fastness for pigmented tapes (IS 6192/IS 11197))	-	850	-
3.2(Tapes – Dimensional stability (PP) (IS 11197))	-	700	-
3.2(Unlaminated Fabric Mass )	-	250	-
3.3.1(Bottom seam (IS 10789))	-	250	-
4.1 and 3.4(Mass of bale (Cl. 4.1), Capacity (Cl 3.4))	-	250	-
4.2 and Table 1 ii(Dimensions )	-	250	-
5.2 and Table 1 iii(Ends per dm )	-	200	-
5.2 and Table 1 iv(Picks per dm )	-	200	-
4.2 and Table 1 v(Mass of sack )	-	300	-
4.2 and Table 1 vi(Average breaking strength of fabric )	-	1100	-
4.2 and Table 1 vi(Breaking strength of bottom seam )	-	1100	-
4.2 and Table 1 viii(Elongation at break of fabric )	-	0	-
4.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	10180	For UV Test (10065+9240)=10180
4.2 and Table 1 x(Ash content )	-	950	-
4.2 and Table 1 x(Ash content )	-	0	-

21 Feb, 2026

-
-

9705

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING AND TECHNOLOGY (CIPET):CSTS-BHOPAL

IS 14887 (2014)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision)

24480 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Tapes – Width and Thickness ( IS 6192/IS 11197))	-	450	Nil
3.2(Tapes – Linear Density (IS 6192/IS 11197))	-	500	Nil
3.2(Tapes – Tenacity (IS 6192/IS 11197))	-	250	Nil
3.2(Tapes – Elongation at point of rupture (IS 6192/IS 11197))	-	1100	Nil
3.2(Tapes – Heat Shrinkage (HDPE) (Cl. 3.2 and IS 6192))	-	1700	Nil
3.2(Tapes – Colour Fastness for pigmented tapes (IS 6192/IS 11197))	-	850	Nil
3.2(Tapes – Dimensional stability (PP) (IS 11197))	-	1400	Nil
3.2(Unlaminated Fabric Mass )	-	250	NIl
3.3.1(Bottom seam (IS 10789))	-	250	Nil
4.1 and 3.4(Mass of bale (Cl. 4.1), Capacity (Cl 3.4))	-	300	Nil
4.2 and Table 1 ii(Dimensions )	-	250	Nil
5.2 and Table 1 iii(Ends per dm )	-	250	Nil
5.2 and Table 1 iv(Picks per dm )	-	0	Charges all ready taken in End per dm test
4.2 and Table 1 v(Mass of sack )	-	300	Nil
4.2 and Table 1 vi(Average breaking strength of fabric )	-	1100	Nil
4.2 and Table 1 vi(Breaking strength of bottom seam )	-	1100	Nil
4.2 and Table 1 viii(Elongation at break of fabric )	-	1100	Nil
4.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	12380	Test charges Rs. 2200/- plus UV Exposure charges Rs. 10180/- (25% discount is not applicable in exposure charges)
4.2 and Table 1 x(Ash content )	-	950	Nil

31 Dec, 2026

-
-

9706

DELHI TEST HOUSE, Azadhpur

IS 14887 (2014)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision)

16000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Tapes – Width and Thickness ( IS 6192/IS 11197))	-	100	-
3.2(Tapes – Linear Density (IS 6192/IS 11197))	-	100	-
3.2(Tapes – Tenacity (IS 6192/IS 11197))	-	100	-
3.2(Tapes – Elongation at point of rupture (IS 6192/IS 11197))	-	1000	-
3.2(Tapes – Heat Shrinkage (HDPE) (Cl. 3.2 and IS 6192))	-	500	-
3.2(Tapes – Colour Fastness for pigmented tapes (IS 6192/IS 11197))	-	500	-
3.2(Tapes – Dimensional stability (PP) (IS 11197))	-	500	-
3.2(Unlaminated Fabric Mass )	-	200	-
3.3.1(Bottom seam (IS 10789))	-	100	-
4.1 and 3.4(Mass of bale (Cl. 4.1), Capacity (Cl 3.4))	-	200	-
4.2 and Table 1 ii(Dimensions )	-	250	-
5.2 and Table 1 iii(Ends per dm )	-	100	-
5.2 and Table 1 iv(Picks per dm )	-	100	-
4.2 and Table 1 v(Mass of sack )	-	200	-
4.2 and Table 1 vi(Average breaking strength of fabric )	-	1000	-
4.2 and Table 1 vi(Breaking strength of bottom seam )	-	1000	-
4.2 and Table 1 viii(Elongation at break of fabric )	-	1000	-
4.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	8000	-
4.2 and Table 1 x(Ash content )	-	800	-

-
For finished product only

9707

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING AND TECHNOLOGY (CIPET):CSTS-BHOPAL

IS 16190 (2014)

Agro textiles - High density polyethylene (HDPE) laminated woven lay flat tube for irrigation purpose - Specification

121275.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4,4.1 IS 6192( MATERIALS HDPE Tapes)	-	4000.00	(Material Identification) 2000.00+ (Presence of UV-stabilizer) 2000.00
4,4.1 IS 6192( MATERIALS HDPE Tapes)	-	750.00	Test Charges for 250.00 (Width ) + 500.00 (Linear Density)
4.2 IS 6899(MATERIALS HDPE Fabric)	-	250.00	Ends/dm
4.2 IS 6899(MATERIALS HDPE Fabric)	-	250.00	Picks/dm
4.2 IS 6899(MATERIALS HDPE Fabric)	-	0	Test Charges is already taken in clause 4.2
5,5.1(MANUFACTURE Lamination )	-	2000.00	Presence of UV-stabiliser
5,5.1(MANUFACTURE Lamination )	-	2000.00	Material Identification
5,5.2(MANUFACTURE A 5 layer laminated fabric is produced using acombination of 2 layers of HDPE fabric and 3 layersof coating film. The minimum coating thickness shall be 35 µ. The layers of HDPE fabric used to manufacture lay flat tubes, shall be joined by sandwich lamination.The minimum thickness of the sandwich laminationshall be 40 µ. )	-	250.00	Coating Thickness
5,5.2(MANUFACTURE A 5 layer laminated fabric is produced using acombination of 2 layers of HDPE fabric and 3 layersof coating film. The minimum coating thickness shall be 35 µ. The layers of HDPE fabric used to manufacture lay flat tubes, shall be joined by sandwich lamination.The minimum thickness of the sandwich laminationshall be 40 µ. )	-	0	Test Charges is already taken in clause 5.5.2
5,5.3 Table 1.(MANUFACTURE The laminated HDPE woven fabric is to be formed in to lay flat tube of the required inside diameter using a heat sealing process keeping the minimum overlap as specified in Table 1.)	-	250.00	overlap distance
6. Table 2 i) IS 1964 (Mass)	-	250.00	-
6. Table 2 ii) a) IS 1969 (Part 1) ( Breaking strength before UV exposure : Wrap)	-	1350.00	1100.00 (breaking strength) + 250.00 (specimen charges)
6. Table 2 ii) b) IS 1969 (Part 1) ( Breaking strength before UV exposure : Weft)	-	1350.00	1100.00 (breaking strength & elongation at break) + 250.00 (specimen charges)
6. Table 2 iii) IS 1969 (Part 1) ( Elongation at break)	-	0	Test Charges is already taken in clause 6.0 (Breaking strength before UV exposure)
6. Table 2 iv) a) Annex B(Retention of breaking strength after UV exposure of 500 h : Wrap 85 percent of original actual value (fabric))	-	90350.00	1100.00 (Retention of breaking strength) + 250.00 (specimen charges) + 89,000.00 (UV exposure of 500 h)
6. Table 2 iv) b) Annex B(Retention of breaking strength after UV exposure of 500 h : weft 85 percent of original actual value (fabric))	-	1350.00	1100.00 (Retention of breaking strength) + 250.00 (specimen charges)
6. Table 2 v) IS 14714 (Abrasion resistance : Loss in breaking strength shall not be more than 15 percent)	-	1375.00	875.00 (Abrasion resistance) + 500.00 (specimen charges)
6. Table 2 vi) a) IS 14293 ( Trapezoid tear strength: Wrap)	-	1350.00	1100.00 (Trapezoid tear strength)+ 250.00 (specimen charges)
6. Table 2 vi) b) IS 14293 ( Trapezoid tear strength : Weft)	-	1350.00	1100.00 (Trapezoid tear strength)+ 250.00 (specimen charges)
6. Table 2 vii) Annex C (Puncture strength)	-	1350.00	1100.00 (Puncture strength)+ 250.00 (specimen charges)
6. Table 2 viii) Annex D ( Environmental stress cracking test : )	-	1200.00	-
6. Table 2 ix) a) IS 7016(Part 8) (Oven method) (Accelerated ageing test for 72 h at 70 ± 1°C: Loss in breaking strength shall not be more than 15 percent Wrap)	-	1800.00	Conditioning Charges
6. Table 2 ix) b) IS 7016(Part 8) (Oven method) (Accelerated ageing test for 72 h at 70 ± 1°C: Loss in breaking strength shall not be more than 1 5 percent Weft)	-	0	Test charges is already taken in clause 6 (Accelerated ageing test for 72 h at 70 ± 1°C: Loss in breaking strength shall not be more than 15 percent Wrap way)
6. Table 2 x) Annex E (Cold cracking resistance test at –5°C)	-	1100.00	-
6.1 Table 1(Internal Diameter : The inside diameter of the lay flat tube shall be as given in Table 1. The internal diameter of the lay flat tube shall be measured by a suitable conical plug gauge and shall conform to the tolerance specified in Table 1)	-	250.00	-
6.2(Workmanship)	-	300.00	-
6.3,6.3.1(Hydrostatic Burst Pressure Test)	-	1600.00	1100.00 (Hydrostatic Burst Pressure Test)+ 500.00 (specimen charges)
6.4 , 6.4.1(Proof Pressure Tes)	-	1600.00	1100.00 (Proof Pressure Test)+ 500.00 (specimen charges)
6.5( Length : Unless specified otherwise, the standard length shall be 30 m. A tolerance of +5 percent shall be permitted on the length prescribed for the lay flat tube by the purchaser. No negative tolerance shall be permitted)	-	250.00	-
6.6(Kink Test :)	-	1100.00	-
6.7 IS 1969 (Part 1)(Welded Seam Strength Before UV Exposure : When a sample of fabric with seam cut from the lay flat tube is tested for welded seam strength as per the method specified in IS 1969 (Part 1), welded seam strength before UV exposure shall be not less than the 80 percent of the original actual fabric strength)	-	1350.00	1100.00 (Welded Seam Strength After UV Exposure)+250.00 (specimen charges)
6.8 Annex B and IS 1969 (Part 1)(Welded Seam Strength After UV Exposure: When a sample of fabric with seam cut from the lay flat tube is tested for welded seam strength as per the method specified in Annex B and IS 1969 (Part 1), the loss in welded seam strength after UV exposure shall be not more than 15 percent)	-	1100.00	-
8(PACKING)	-	0	-

31 Dec, 2026

-
-

9708

Conformity Testing Labs Pvt. Ltd. Unit 2

IS 16242 : Part 1 (2014)

Uninterruptible power systems (UPS): Part 1 general and safety requirements for UPS

200000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.5(Components)	-	5000	10% discount for BIS
4.6(Power interface)	-	5000	10% discount for BIS
4.7(Marking & instructions)	-	5000	10% discount for BIS
5.1(Protection against shock and energy hazards)	-	5000	10% discount for BIS
5.2(Requirement of auxiliary circuits)	-	5000	10% discount for BIS
5.3(Protective earthing and bonding)	-	5000	10% discount for BIS
5.4(AC and DC power isolation)	-	5000	10% discount for BIS
5.5(Over current and earth fault condition)	-	5000	10% discount for BIS
5.6(Safety interlocks)	-	5000	10% discount for BIS
5.7(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	10000	10% discount for BIS
6.1(Wiring, connections and supply)	-	10000	10% discount for BIS
6.2(Connection to power)	-	5000	10% discount for BIS
6.3(Wiring terminals for external power conductors)	-	5000	10% discount for BIS
7.1(Enclosure)	-	5000	10% discount for BIS
7.2(STABILITY)	-	5000	10% discount for BIS
7.3(MECHANICAL STRENGTH)	-	10000	10% discount for BIS
7.4(Construction details)	-	10000	10% discount for BIS
7.5(Resistance to fire)	-	10000	10% discount for BIS
7.6(Battery location)	-	5000	10% discount for BIS
7.7(Temperature rise)	-	10000	10% discount for BIS
8.1(General procision for earth leakage)	-	5000	10% discount for BIS
8.2(Electric Strength)	-	5000	10% discount for BIS
8.3(Abnormal operating and fault conditions)	-	10000	10% discount for BIS
9.0(Connection to telecommunication networks)	-	5000	10% discount for BIS

05 Apr, 2027

-
Solid State Back Feed Protection (I.5 of Annex I), Component (Cl.4.5 (1.5/RD)), Safety Interlocks (Cl.5.6.1(2.8/RD))

9709

Bharat Test House Pvt Ltd 1474 Haryana

IS 16242 : Part 1 (2014)

Uninterruptible power systems (UPS): Part 1 general and safety requirements for UPS

160000 View breakup
Rs.80000/- for ≤ 5KVA Rs.115000/- for ≥ 5KVA (5% discount for BIS). Rs.1,85,000/- for > 10 KVA (for 3 phase)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.5(Components)	-	0	-
4.6(Power interface)	-	5000	5% discount for BIS
4.7(Marking & instructions)	-	2000	5% discount for BIS
5.1(Protection against shock and energy hazards)	-	4000	5% discount for BIS
5.2(Requirement of auxiliary circuits)	-	4000	5% discount for BIS
5.3(Protective earthing and bonding)	-	7000	5% discount for BIS
5.4(AC and DC power isolation)	-	3000	5% discount for BIS
5.5(Over current and earth fault condition)	-	5000	5% discount for BIS
5.6(Safety interlocks)	-	6000	5% discount for BIS
5.7(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	6000	5% discount for BIS
6.1(Wiring, connections and supply)	-	12000	5% discount for BIS
6.2(Connection to power)	-	13000	5% discount for BIS
6.3(Wiring terminals for external power conductors)	-	10000	5% discount for BIS
7.1(Enclosure)	-	1000	5% discount for BIS
7.2(STABILITY)	-	2000	5% discount for BIS
7.3(MECHANICAL STRENGTH)	-	2000	5% discount for BIS
7.4(Construction details)	-	5000	5% discount for BIS
7.5(Resistance to fire)	-	7000	5% discount for BIS
7.6(Battery location)	-	3000	5% discount for BIS
7.7(Temperature rise)	-	5000	5% discount for BIS
8.1(General procision for earth leakage)	-	7000	5% discount for BIS
8.2(Electric Strength)	-	8000	5% discount for BIS
8.3(Abnormal operating and fault conditions)	-	15000	5% discount for BIS
9.0(Connection to telecommunication networks)	-	28000	5% discount for BIS

19 Mar, 2026

-
Single Phase and 3 phase. Except : Cl. 4.5 : Components Cl. 1.5 radio frequency electromagnetic field, amplitude modulated, immunity to power frequency magnetic field, immunity to low frequency signals, Cl. 5.6.1 Operator protection, Cl.7.6.7 & Annex M_Ventilation,Cl. 2.10.5.12 Insulated winding wires

9710

CSIR-CECRI, CSIR-Battery Performance Testing & Evalauation Centre

IS 16270 (2014)

Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test

417600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1(Capacity test)	-	20000	-
8.2(Endurance test)	-	182860	-
8.3(Charge retention test)	-	29880	-
8.4(Cycle endurance in Photovoltaic application)	-	142340	-
8.5(Sulphation Test)	-	6800	-
8.6(Water loss test)	-	35720	-

24 Sep, 2027

-
-

9711

Conformity Testing Labs Pvt. Ltd. Unit 2

IS 16270 (2014)

Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test

750000 View breakup
Rs.7,50,000/- (10% Discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Condition of use)	-	10000	10% discount offered to BIS
5.1(Mechanical Endurance)	-	15000	10% discount offered to BIS
5.2(Charge efficiency)	-	15000	10% discount offered to BIS
5.3(Deep discharge protection)	-	10000	10% discount offered to BIS
5.4(Marking)	-	5000	10% discount offered to BIS
5.5(Dafety)	-	10000	10% discount offered to BIS
5.6(Documentation)	-	5000	10% discount offered to BIS
6(Finctional Characteristics)	-	3000	10% discount offered to BIS
7(General test conditions)	-	5000	10% discount offered to BIS
8.1(Capacity test)	-	80000	10% discount offered to BIS
8.2(Endurance test)	-	300000	10% discount offered to BIS
8.3(Charge retention test)	-	75000	10% discount offered to BIS
8.4(Cycle endurance in Photovoltaic application)	-	250000	10% discount offered to BIS
8.5(Sulphation Test)	-	50000	10% discount offered to BIS
8.6(Water loss test)	-	50000	10% discount offered to BIS
8.7(Non spillability)	-	70000	10% discount offered to BIS

05 Apr, 2027

-
-

9712

National Test House (WR), Mumbai

IS 158 (2015)

Ready mixed paint, brushing, bituminous, black, acid, alkali and heat resisting - Specification (Fourth Revision)

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Composition)	-	100	-
4.2.1(Lead Restriction)	-	400	-
Cl 4.3, Table 1, S.no. i)(Drying time, Hard dry)	-	300	-
Cl 4.3, Table 1, S.no. ii)(Consistency)	-	200	-
Cl 4.3, Table 1, S.no. iii)(Finish)	-	200	-
Cl 4.3, Table 1, S.no. iv)(Wet opacity)	-	300	-
Cl 4.3, Table 1, S.no. v)(Colour)	-	100	-
Cl 4.3, Table 1, S.no. vi)( Mass)	-	200	-
Cl 4.3, Table 1, S.no. vii)(Water content)	-	500	-
Cl 4.3, Table 1, S.no.viii)(Flexibility and adhesion)	-	200	-
Cl 4.3, Table 1, S.no. ix)(Stripping test )	-	300	-
Cl 4.3, Table 1, S.no. x)(Protection against corrosion under conditions of condensation)	-	500	-
Cl 4.3, Table 1, S.no.xi)(Volatile matter, perce)	-	200	-
Cl 4.3, Table 1, S.no.xii)(Resistance to acid)	-	300	-
Cl 4.3, Table 1, S.no.xiii)(Resistance to alkali)	-	300	-
Cl 4.3, Table 1, S.no.xiv)(Resistance to Heat)	-	300	-
Cl 4.3, Table 1, S.no.xv)(Flash point ,)	-	300	-
Cl 4.3, Table 1, S.no.xvi)(Keeping properties)	-	300	-

24 Jul, 2025

-
-

9713

National Test House (NR)

IS 1489 : Part 2 (2015)

Portland - Pozzolana cement - Specification: Part 2 calcined clay based

PPC (CCB)

11000 View breakup
For BIS samples: BIS approved testing charges. For others: Rs.11000/- [ Rs.7000/-for Mechanical, Rs.4000/- for Chemical]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 -Table 2- i(Fineness 4031 Part 2)	-	1000	-
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	500	-
7 -Table 2- ii- a(Expansion after aeration - 4031 Part 3)	-	0	-
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	1000	-
7 -Table 2- ii- b(Expansion after aeration- 4031 Part 3)	-	0	-
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	500	-
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	500	-
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1000	-
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1000	-
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1000	-
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	1000	-
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	1000	-
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	1000	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	1000	-
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	1000	-
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	1000	-
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	1000	-
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	1000	-
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	1000	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	1000	-
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	1000	-
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	1000	-
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	1000	-

26 Oct, 2025

-
Lab is recognized revised version of standard IS 1489(Pt-2):2015.

9714

AADCO TESTING & RESEARCH LABORATORY PVT LTD

IS 1489 : Part 2 (2015)

Portland - Pozzolana cement - Specification: Part 2 calcined clay based

3350 View breakup
Rs.3350/- for Mechanical + Chemical (10% discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	300	-
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	300	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	300	-
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	250	-
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	250	-
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	225	-
7 -Table 2- i(Fineness 4031 Part 2)	-	200	-
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	200	-
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	250	-
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	150	-
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	200	-
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	150	-
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	150	-
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	200	-
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	225	-

26 Jul, 2027

-
Except Transverse Strength

9715

CIPET, Jaipur

IS 14252 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sack for filling sand – Specification (second revision)

PE & PP All

19090 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Raw Material)	-	1050	-
3.2(Tapes – Width )	-	250	-
3.2(Tapes – Linear Density )	-	0	-
3.3(Tying Cord)	-	0	-
3.4(Sack)	-	0	-
3.4.1(Seam)	-	0	-
4.1 and Table 1 i a(Dimensions Outside Length)	-	250	-
4.1 and Table 1 i b(Dimensions Outside Width)	-	250	-
4.1 and Table 1 ii(Ends per dm )	-	250	-
4.1 and Table 1 iii(Picks per dm )	-	250	-
4.2 and Table 1 iv(Mass of sack )	-	250	-
4.1 and Table 1 v a(Average breaking strength of fabric Warpway )	-	1100	-
4.1 and Table 1 v b(Average breaking strength of fabric Weftway )	-	1100	-
4.1 and Table 1 vi(Average Breaking strength of bottom seam )	-	1100	-
4.1 and Table 1 vii a(Elongation at break of fabric Lengthwise)	-	1100	-
4.1 and Table 1 vii b(Elongation at break of fabric Widthwise )	-	0	-
4.1 and Table 1 viii(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	11440	UV exposure(10340)+Breaking strength(1100)
4.1 and Table 1 ix(Ash content )	-	950	-

21 Feb, 2026

-
-

9716

CIPET, Jaipur

IS 14968 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing 50 Kg/25 kg sugar – Specification (first revision)

PE & PP All

19630 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Raw Material)	-	1050	-
3(TYPES)	-	0	-
4.2(Tapes – Width IS 6192 and IS 11197)	-	250	-
4.2(Tapes – Linear Density )	-	500	-
4.2(Construction)	-	250	-
4.3(Sacks)	-	300	-
4.3.1(Bottom Seam)	-	0	-
4.3.1(The two rows of stitches shall be separated from each other)	-	0	-
4.3.1( The outer stitch)	-	0	-
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	0	-
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	0	-
4.3.1(stitches/dm)	-	0	-
4.3.2(Mouth)	-	0	-
4.4(Liner IS 10146 or IS 10910.)	-	0	-
4.4(Mass of the loose liner )	-	0	-
4.4(Width of the loose liner)	-	0	-
4.4(Length of the line)	-	0	-
4.4(Bottom seam of the loose liner)	-	0	-
4.4.1(Liner)	-	0	-
4.5 and Table 1 i(Capacity)	-	250	-
5.2 and Table 1 ii a(Dimensions Inside Length)	-	250	-
5.2 and Table 1 ii b(Dimensions Inside Width)	-	0	-
5.2 and Table 1 iii(Ends per dm )	-	200	-
5.2 and Table 1 iv(Picks per dm )	-	200	-
5.1 and Table 1 v a(Mass of unlaminated sack IS 1964)	-	250	-
5.1 and Table 1 v b(Mass of unlaminated sack with liner )	-	0	-
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise IS 1969 (Part 1))	-	1100	-
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise IS 1969 (Part 1))	-	1100	-
5.2 and Table 1 vi(Breaking strength of bottom seam IS 9030 )	-	1100	-
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise IS 1969 (Part 1))	-	0	-
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise IS 1969 (Part 1))	-	0	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	12380	UV exposure(10180)+ Breaking strength(Length)1100+Breaking strength(Width)1100
5.2 and Table 1 x(Ash content )	-	950	-

21 Feb, 2026

-
-

9717

Ace Test Labs & Metrology Pvt. Ltd.

IS 16046 (2015)

Secondary Cells and Batteries Containing Alkaline or Other Non-acid Electrolytes - Safety Requirements for Portable Sealed Secondary Cells, and for Batteries Made from them, for Use in Portable Applications ( First Revision )

- View breakup
Rs. 132000/- for Nickel cells, Rs.89000/- for Nickel battery Rs.91000/- for Lithium cells, Rs.60000/- for Lithium battery (10% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

14 Nov, 2027

-
-

9718

DELHI TEST HOUSE, Azadhpur

IS 16046 (2015)

- View breakup
Rs.85,000/- Cells, Rs.78,000/- Battery

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

-
-

9719

Matrix Test Labs

IS 16046 (2015)

- View breakup
Rs.1,80,000/- [10% discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

31 Dec, 2026

-
Transport test (Cl.8.3.8) based on manufacturer’s documents to demonstrate compliance.

9720

URS PRODUCTS AND TESTING PVT LTD

IS 16046 (2015)

- View breakup
Rs.60,000/- [15% discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

31 Dec, 2026

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number

No Record Found

No Record Found

No Record Found

No Record Found