BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15386 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

9661

RTRC LIMITED, GURUGRAM

9177406

IS 14255 (1995)

Aertal bunched cables - For working voltages up to and including 1100 Volts - Specification

CABLE

18500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Phase/Street Lighting conductor)	-	0	-
4.2(Messenger (Neutral Conductor or Otherwise))	-	0	-
5.1(Insulation)	-	0	-
6.1(Flexibility class)	-	0	-
6.2(Compactness)	-	0	-
6.2(No of strands)	-	0	-
6.2(Surface)	-	0	-
6.3(Protective barrier)	-	0	-
6.4(size of street lighting conductor)	-	0	-
6.5(Size of messenger conductor )	-	0	-
6.6(Joints in messenger conductor )	-	0	-
6.6(Direction of outer layer)	-	0	-
7.1(Insulation)	-	0	-
7.2( Thickness of insulation)	-	500	-
7.3(Tolerance on thickness of insulation )	-	0	-
7.4(Aplication of the insulation )	-	0	-
7.5(Colour of the insulation )	-	0	-
8.1(Core identification)	-	0	-
8.2(Core identification)	-	0	-
8.3(Identification by other means)	-	0	-
9.1(Assembly (Laying up))	-	0	-
9.2(Assembly (Laying up))	-	0	-
9.3(Direction of lay)	-	0	-
10.1 a) i)(Tests on phase/street light conductor: tensile test - Test method IS10810:Part 2)	-	500	-
10.1 a) ii)(Wrapping test - 10810: Part 3)	-	500	-
10.1 a) iii)(Resistance test - IS10810: Part 5)	-	1000	-
10.1 b) i)(Test on messenger conductor: Breaking load - IS 10810: Part 2)	-	1000	-
10.1 b) ii)(Test on messenger conductor: Elongation test - Cl 11.3)	-	1000	-
10.1 b) iii)(Test on messenger conductor: Resistance test - IS 10810: Part 5)	-	500	-
10.1 c) i)(Physical tests for XLPE Insulation: Tensile strength - IS 10810: Part 7)	-	500	-
10.1 c) i)(Physical tests for XLPE Insulation: elongation at break - IS 10810: part 7)	-	500	-
10.1 c) ii)(Ageing in air oven : Tensile strength variation - IS 10810:Part 11)	-	3000	-
10.1 c) ii)(Ageing in air oven : Elongation variation- IS 10810: Part 11)	-	500	-
10.1 c) iii)(Hot set test: Elongation under load - IS 10810: Part 30)	-	1000	-
10.1 c) iii)(Hot set test: Permanent elongation (set) after cooling - IS 10810: Part 30)	-	500	-
10.1 c) iv)(Shrinkage test : Shrinkage - 10810:Part 12)	-	500	-
10.1 c) iv)(Shrinkage test : Crack Observed - 10810:Part 12)	-	500	-
10.1 c) v)(Water ahsorption (Gravimetric) - IS 10810: Part 33 )	-	3000	-
10.1 d) i)(Physical test for PE insulation: Tensile strength - IS 10810: Part 7 )	-	500	Additional, If applicable
10.1 d) i)(Physical test for PE insulation: elongation at break - IS 10810: Part 7)	-	500	Additional, If applicable
10.1 d) ii)(Melt flow index- IS 10810: Part 23)	-	1500	Additional charge, If applicable
10.1 d) iv)(Vicat softening point -IS 10810: Part 22)	-	2500	Additional charge, If applicable
10.1 d) v)(Environmental stress cracking -IS 10810:Part29)	-	4500	Additional charge, If applicable
10.1 f)(Insulation resistance (Volume resistivity) test a) volume resistivity at 27°C - IS 10810: Part 43)	-	1000	-
10.1 f)(Insulation resistance (Volume resistivity) test b) volume resistivity at 70°C - IS 10810: Part 43)	-	1000	-
10.1 g)(High voltage test - IS10810:Part 45)	-	1500	-
11.4(Bending Test on the Completed Cable ( Optional) )	-	1000	Additional charge, If applicable
11.4(Bending Test on the Completed Cable ( Optional))	-	1000	Additional charge, If applicable
10.1 d) iii)(Carbon Black Content)	-	3500	Additional charge, If applicable

03 Apr, 2027

-
Included w.e.f. 24.04.2024

9662

RTRC LIMITED, GURUGRAM

9177406

IS 1554 : Part 1 (1988)

Specification for pvc insulated (Heavy Duty) electric cables: Part 1 for working voltages up to and including 1100 v (Third Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(MATERIALS : CONDUCTOR)	-	0	Additional Charges, Rs 1500/- for each additional core. Additional Charges for FR-LSH/FR test as applicable
4.1.1(INSULATION : General Purjose Insulaiion)	-	0	-
4.1.2(INSULATION : Heat Resisting Insulation)	-	0	-
5.1(MATERIALS : FILLER AND INNER SHEATH)	-	0	-
5.2(MATERIALS : FILLER AND INNER SHEATH)	-	0	-
6.1(MATERIALS : ARMGURING)	-	0	-
6.2(MATERIALS : ARMGURING)	-	0	-
7.1.1(OUTER SHEATH : For Cables with General Purpose InsuIafion)	-	0	-
7.1.2(OUTER SHEATH : For Cables with Heat Resisting InsuIalion)	-	0	-
8.1(CONSTRUCTION : CONDUCTOR)	-	0	-
8.2(CONSTRUCTION : CONDUCTOR)	-	0	-
9.1(INSULATION )	-	0	-
9.2(INSULATION : Thickness of Insulation)	-	500	-
9.3(INSULATION :Tolerance on Thickness of Insulation)	-	0	-
9.4(INSULATION : Application of Insulation)	-	0	-
10.1(CORE IDENTIFICATION)	-	0	-
10.2(CORE IDENTIFICATION)	-	0	-
10.3(CORE IDENTIFICATION)	-	0	-
10.3.1(Arrangement of Marking)	-	0	-
11.1(LAYING UP OF CORES)	-	0	-
11.2(LAYING UP OF CORES)	-	0	-
12.1(INNER SHEATH)	-	0	-
12.2(INNER SHEATH)	-	0	-
12.3(INNER SHEATH :Thickness of Inner Sheath)	-	0	-
12.3.1(INNER SHEATH :Thickness of Inner Sheath)	-	0	-
13.1.1(ARMOURING : Application)	-	0	-
13.1.2(Armouring: Coverage )	-	0	-
13.1.3(ARMOURING : Direction of lay )	-	0	-
13.1.4(ARMOURING : Application)	-	0	-
13.2(ARMOURING : Type of Armour)	-	0	-
13.2.1(ARMOURING : Type of Armour)	-	0	-
13.3(Armouring : Dimensions -Wire Diameter)	-	0	-
13.3(Armouring : Dimensions -Formed wire )	-	500	-
13.4(ARMOURING : Joints)	-	0	-
13.5.1(ARMOURING : Resistance)	-	500	-
13.5.2(ARMOURING : Resistance)	-	0	-
13.6 a)(ARMOURING: Tensile Strength)	-	500	-
13.6 b)(ARMOURING: Elongation )	-	0	-
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	500	-
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	0	-
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	500	-
13.6 f)(ARMOURING: Mass of zinc coating )	-	500	-
13.6 g)(ARMOURING: Resistivity)	-	500	-
14.1(OUTER SHEATH)	-	0	-
14.2(OUTER SHEATH)	-	0	-
14.3(OUTER SHEATH : Colour )	-	0	-
14.4.1(Thickness of Outer Sheath : Unarmowed Cables)	-	0	-
14.4.2(Thickness of Outer Sheath : Armoured Cables)	-	500	-
15.1 a) 1)(Tests on conductor : Annealing test ( for copper ))	-	0	-
15.1 a) 2)(Tensile test (for aluminium) - Before stranding )	-	0	-
15.1 a) 2)(Tensile test (for aluminium) - After stranding )	-	0	-
15.1 a) 3)(Tests on conductor : Wrapping test ( for aluminium ))	-	0	-
15.1 a) 4)(Tests on conductor : Conductor resistance test)	-	500	-
15.1 a) 4)(Resistance test - Neutral conductor )	-	0	-
15.1 d)1)(Phyaical tests for insulation : Tensile Test)	-	500	-
15.1 d)1)(Phyaical tests for insulation : Elongation )	-	0	-
15.1 d)1)(Physical tests for sheath : Tensile stregth )	-	500	-
15.1 d)1)(Physical tests for sheath : Elongation )	-	0	-
15.1 d)2)(Phyaical tests for insulation- Ageing in air Oven : Tensile Test)	-	500	-
15.1 d)2)(Phyaical tests for insulation - Ageing in air oven : Elongation )	-	0	-
15.1 d)2)(Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	0	-
15.1 d)2)(Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	0	-
15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	500	-
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation )	-	0	-
15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	0	-
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	0	-
15.1 d)3)(Phyaical tests for insulation : Shrinkage )	-	500	-
15.1 d)3)(Phyaical tests for insulation : Shrinkage - Crack observed )	-	0	-
15.1 d)3)(Phyaical tests for Sheath : Shrinkage )	-	0	-
15.1 d)3)(Phyaical tests for Sheath : Shrinkage - Crack observed )	-	0	-
15.1 d)4)(Hot deformation : Insulation )	-	500	-
15.1 d)4)(Hot deformation : Sheath )	-	0	-
15.1 d)5)( Loss of mass in air oven- Insulation )	-	500	-
15.1 d)5)( Loss of mass in air oven- sheath )	-	0	-
15.1 d)6)(Heat shock test- Insulation )	-	500	-
15.1 d)6)(Heat shock test- sheath )	-	0	-
15.1 d)7)(Thermal stability- insulation )	-	500	-
15.1 d)7)(Thermal stability- Sheath )	-	0	-
15.1 e)(Insulation resistance test : Volume Resistivity )	-	500	-
15.1 e)(Insulation resistance test : IR Constant )	-	0	-
15.1 f)(High voltage test ( water immersion test ))	-	1500	-
15.1 g)(High voltage test at room temperature)	-	500	-
15.1 g)(High voltage test at room temperature)	-	0	-
15.4 a)(Cold bend test- Insulation ( Optional test))	-	500	-
15.4 a)(Cold bend test- Sheath ( Optional test))	-	500	-
15.4 b)(Cold impact test- Insulation ( Optional test))	-	0	-
15.4 b)(Cold impact test- Sheath ( Optional test))	-	0	-
15.4 c)(Armour resistance test ( for other than mining cables ).- Optional test )	-	500	-
16.1(DETAILS OF TESTS : General)	-	0	-
16.2(DETAILS OF TESTS : High Voltage Test at Room Temperature)	-	0	-
16.3.1(High Voltage Test ( Water Immersion Test ) : a.c. Test)	-	500	-
16.3.2(High Voltage Test ( Water Immersion Test ) : d.c. Test)	-	500	-
16.4(Flammability Test)	-	0	-
16.5(Oxygen Index Test)	-	2500	additional charge, if applicable
16.6(Flame Retardance Test on Single Cables)	-	0	-
16.7(Flame Retardance Test on Bunched Cables)	-	5500	additional charge, if applicable
16.9(Test for Halogen Acid Gas Evolution)	-	3500	additional charge, if applicable
16.1(Temperature Index)	-	0	-
17.1(IDENTIFICATION : Manufacturer’s Identification)	-	0	-
17.2(IDENTIFICATION : Cable Identification)	-	0	-
17.2.1(IDENTIFICATION : Cable Identification)	-	0	-
17.3(IDENTIFICATION : Cable Code)	-	0	-
15.1.e(Insulation resistance Test- Insulation resistance At Maximum rated temperature temperature)	-	0	-
15.1.e(Insulation resistance Test- Insulation resistance constant At Room temperature)	-	0	-
15.1.e(Insulation resistance Test- Volume Resistivity At Maximum rated temperature temperature)	-	0	-
15.1.e(Insulation resistance Test- Volume Resistivity At Room temperature)	-	500	-
16.4(Flammability Test- Un affected portion)	-	0	-
16.4(Flammability Test- Period of Burning)	-	0	-
9.3(Minimum Thickness of Reduce core insulation)	-	0	-
9.2(Thickness of Reduce core insulation)	-	0	-
3.1 Table 2 IS 8130(Number of wires in the conductor)	-	0	-
Cl No. 16.10(Smoke density test)	-	3500	additional charge, if applicable
Cl No. 16.8(Test for specific optical density of smoke)	-	0	-
Table 4(Copper purity test)	-	0	-

03 Apr, 2027

-
Included w.e.f. 24.04.2024

9663

Atharva Laboratories Pvt. Ltd. (D115A), Noida (8134206)

8134206

IS 13893 (1994)

Polyurethane soles semirigid - specification

5300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Design)	-	200	Ok
4.2(Thickness )	-	300	Ok
4.3(Relative density )	-	300	Ok
4.3(Hardness Shore(A))	-	300	Ok
4.3(Tensile Strength )	-	600	Ok
4.3(Elongation at break)	-	200	Ok
4.3(Abrasion Resistance)	-	800	Ok
4.3(Flexural strength )	-	1000	Ok
4.3(Ross Flex test)	-	800	Ok
4.3.2(Ageing test)	-	0	N/A
5, 5.1, 5.2(Packing And Marking)	-	0	N/A
Cl.5, 5.1, 5.2(Packing And Marking)	-	0	N/A
4.2 (Amendment 2)(Thickness)	-	0	N/A
4.3.1 Table 1 i) (Amendment 2)(Relative Density)	-	0	N/A
4.3.1 Table 1 iii) (Amendment 2)(Abrasion Resistance at applied force of 10 N)	-	0	N/A
4.3.1 Table 1 iv) (Amendment 2)(Flexing Resistance, Bennewart method)	-	0	N/A
4.3.1 Table 1 v) (Amendment 2)(Hydrolysis Resistance, cut growth after 150000 flexes)	-	0	Ok
4.3.1 Table 1 vi) (Amendment 2)(Tensile Strength)	-	0	N/A
4.3.1 Table 1 vii) (Amendment 2)(Elongation at break)	-	0	N/A
4.3.1 Table 1 viii) (Amendment 2)(Tear Strength (average force))	-	800	Ok
4.3.1 Table 1 ii) (Amendment 2)(Hardness, degree, Shore A)	-	0	N/A

21 Jul, 2028

-
Amendment No. 2 included w.e.f. 05.04.2024

9664

Atharva Laboratories Pvt. Ltd. (D115A), Noida (8134206)

8134206

IS 6664 (1992)

Rubber microcellular sheets for soles and heels - Specification (First Revision)

9100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4, Cl.4.1,4.1.1,4.1.2(Requirements)	-	500	Ok
Cl.4 Cl.4.1.3 And 8.3,Table1, i)(Relative density)	-	500	Ok
Cl.4.1.3 And 8.3,Table1, iii)(Hardness, Shore A durometer min)	-	500	Ok
Cl.4 Cl.4.1.3 And 8.3,Table1, iii)(Change in Hardness after ageing at 100±1°C for 24hr)	-	1200	Ok
Cl.4 Cl.4.1.3 And 8.3,Table1, iv)(Compression set at constant stress percent, Max)	-	1200	Ok
Cl.4 Cl.4.1.3 And 8.3,Table1, v)(Split tear strength, kg,Min)	-	900	Ok
Cl.4 Cl.4.1.3 And 8.3,Table1, vi)(Room Temperature shrinkage at 27±2°C for 2weeks, percent, Max)	-	1200	Ok
Cl.4 Cl.4.1.3 And 8.3,Table 1, vi)(Heat shrinkage test at 100±1°C for 1 hour max)	-	1200	Ok
Cl.4 Cl.4.1.3 And 8.3,Table1, viii)(Water absorption , percent by mass, Max)	-	800	Ok
Cl.4 Cl.4.1.3 And 8.3,Table 1, viii)(Flexing resistance: Maximum cut growth at 50 000 cycles)	-	800	Ok
4.2(Size & Thickness )	-	300	Ok

21 Jul, 2028

-
Amendment No. 1 included w.e.f. 05.04.2024

9665

ABSOLUTE EXPERTISE TESTING LABORATORY LLP

8176726

IS 16333 : Part 3 (2022)

Mobile phone handsets: Part 3 Indian language support for mobile phone handsets - Specific requirements(Second Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Inputting of text)	-	6000	-
5.2(Message Readability)	-	6000	-
6(Marking)	-	1000	-
"Cl.6.1 "(Marking)	-	1000	-
"Cl.6.2 "(BIS Certification Marking)	-	1000	-
4(Requirements)	-	0	-
5(Tests)	-	0	-
6(Marking)	-	0	-
5.1(Inputting of text)	-	-	-
5.2(Message Readability)	-	-	-
6(Marking)	-	-	-
"Cl.6.1 "(Marking)	-	-	-
"Cl.6.2 "(BIS Certification Marking)	-	-	-
4(Requirements)	-	-	-
5(Tests)	-	-	-
6(Marking)	-	-	-

11 Mar, 2027

-
Included w.e.f. 11.06.2024

9666

ABSOLUTE EXPERTISE TESTING LABORATORY LLP

8176726

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

48000 View breakup
Product: Information technology equipment - Safety: Part 1 general requirements (Second Revision) (Automatic Data Processing Machine, Laptop/Notebook/ Tablet, Printer, Plotter, Scanner, Set Top Box, Telephone answering machines, Visual display unit, videos monitors of screen size 32" & above, Cash Registers, Copying machine/ duplicator, Point of sale terminal, Mail processing machine/ postage machine/ Franking machine, Power adaptor for IT equipments, Visual display unit, videos monitors of screen size upto 32", Passport Reader, Power bank for use in portable applications, Mobile phones, Smart card reader, CCTV Camera/ CCTV Recorders, USB driven Barcode readers, Barcode scanners, iris scanners, Optical Fingerprint Scanners, Smart watches, Wireless Keyboard, Keyboard, Automatic Teller Cash Dispensing Machines, USB Type External Hard Disk Drive, USB type External Solid State Storage Devices (above 256 GB Capacity), Standalone Switch Modñe Power supplies (SMPS) with output Voltage 48 V (max.), Digital Camera.) Grade/Variety/Designations applied for-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.6(Power interface .)	-	2000	-
1.7(Markings and instructions)	-	1000	-
2.1(Protection from electric shock and energy hazards)	-	2000	-
2.2(SELV circuits)	-	2000	-
2.3(TNV circuits)	-	1000	-
2.4(Limited current circuits)	-	2000	-
2.5(Limited power sources .)	-	2000	-
2.6(Provisions for earthing and bonding)	-	2000	-
2.7(Overcurrent and earth fault protection in primary circuits)	-	2000	-
2.8(Safety interlocks)	-	2000	-
2.9(Electrical insulation)	-	1000	-
2.10(Clearances, creepage distances and distances through insulation)	-	1000	-
3.1(General)	-	1000	-
3.2(Connection to a mains supply)	-	1000	-
3.3(Wiring terminals for connection of external conductors)	-	1000	-
3.4(Disconnection from the mains supply)	-	1000	-
3.5(Interconnection of equipment)	-	1000	-
4.1(Stability)	-	2000	-
4.2(Mechanical strength)	-	2000	-
4.3(Design and construction)	-	1000	-
4.4(Protection against hazardous moving parts)	-	1000	-
4.5(Thermal requirements)	-	2000	-
4.6(Openings in enclosures)	-	1000	-
4.7(Resistance to fire)	-	2000	-
5.1(Touch current and protective conductor curren)	-	1000	-
5.2(Electric strength)	-	2000	-
5.3(Abnormal operating and fault conditions)	-	2000	-
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	1000	-
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	1000	-
6.3(Protection of the telecommunication wiring system from overheating)	-	1000	-
7.1(General)	-	1000	-
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	1000	-
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	1000	-
7.4(Insulation between primary circuits and cable distribution systems)	-	1000	-
2.8.2/2.8.5(Interlock switches)	-	0	-
2.10.4.2(Material Group and Comparative Tracking Index)	-	0	-
2.10.5.3(Insulating Compound as Solid Insulation)	-	0	-
2.10.5.6(Thin sheet materials)	-	0	-
2.10.6(PCB material)	-	0	-
2.10.8.2(Thermal conditioning (thermal ageing))	-	0	-
2.10.8.4(Abrasion resistance test)	-	0	-
2.10.9(Thermal Cycling)	-	0	-
2.10.10(Test for Pollution Degree 1 environment and for insulating compound)	-	0	-
2.10.11(Tests for semiconductor devices and for cemented joints)	-	0	-
2.10.12(Enclosed and sealed parts)	-	0	-
3.1.4(Internal wire)	-	0	-
3.2.4(Appliance inlet /connector)	-	0	-
3.2.4(Appliance inlet /connector)	-	0	-
3.2.5(Non re-wirable plug with PVC sheathed cable)	-	0	-
4.3.10(Dust, powders, liquids and gases)	-	0	-
4.3.11(Containers for liquids or gases)	-	0	-
4.3.12(Flammable liquids)	-	0	-
Annex A3(Hot flaming oil test)	-	0	-
Annex U(Insulating winding wires for use without interleaved insulation)	-	0	-
Annex K(Thermal Control)	-	0	-
Annex B(Motor tests under abnormal conditions)	-	0	-
Annex C(Transformers)	-	0	-
Annex DD(Requirements for the mounting means of a rack mounted equipment)	-	0	-
Annex EE(Household and home/ office document/ media shredders)	-	0	-
4.6.2(Bottoms of fire enclosures)	-	0	-
2.10.5.11(SMPS Transformer and Inductor)	-	0	-
2.10.5.12(Wires in wound components)	-	0	-
2.10.5.13(Winding wire)	-	0	-
2.10.5.14(Additional insulation in wound components)	-	0	-

11 Mar, 2027

-
Included w.e.f. 11.06.2024 Exclusion: Cl. 1.5 (Components), Cl. 2.8.2/2.8.5 (Interlock switches), Cl. 2.8.7 (Switches and Relay), Cl. 2.10.5.4 (Opto-coupler), Cl. 3.2.5 (Non re-wirable plug with PVC sheathed cable), Cl. 4.2.8 (Cathode Ray Tubes), Cl. 4.3.8 (Batteries), Cl. 4.3.13.2 (Ionizing radiation), Cl. 4.3.13.3/ Annex Y (Effect of UV radiation on material/Ultraviolet conditioning test), Cl. 4.3.13.4 (Human exposure to ultraviolet (UV) radiation), Cl. 4.3.13.5 (LED, laser class), Annex CC (Evaluation of integrated circuit (IC) current limiters), Annex Q (Voltage Dependent Resistors)

9667

ABSOLUTE EXPERTISE TESTING LABORATORY LLP

8176726

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

52000 View breakup
Product: Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision) (Amplifiers with input power 2000W and above, Electronic games (Video), Plasma/LCD/LED TV of screen size 32" & above, Electronic musical system with input power 200W and above, Optical disc player with built in amplifiers of input power 200W and above, Power adopters for audio, video & similar electronic apparatus, Plasma/ LCD/LED TV of screen size up to 32", Wireless headphone and earphone, Electronic Musical System with input power below 200W, Television other than plasma/LCD/LED/ TVs, Wireless microphone, Video camera, Webcam (Finished product), Smart speaker (with and without display), Bluetooth speakers) Grade/Variety/Designations applied for

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	3000	-
6(Hazardous radiations)	-	0	-
7(Heating under normal operating conditions)	-	4000	-
8(Constructional requirements with regard to the protection against electric shock)	-	4000	-
9(Electric shock hazard under normal operating conditions)	-	4000	-
10(Insulation requirements)	-	6000	-
11(Fault conditions)	-	3000	-
12(Mechanical strength)	-	6000	-
13(CLEARANCES and CREEPAGE DISTANCES)	-	3000	-
15(TERMINALS)	-	3000	-
16(External flexible cords)	-	2500	-
17(Electrical connections and mechanical fixings)	-	2500	-
19(Stability and mechanical hazards)	-	3000	-
20(Resistance to fire)	-	6000	-
6.3()	-	0	-
15(Internal wires and power cords)	-	0	-
20.2.4(Printed Boards)	-	0	-
3(General requirements)	-	0	-
4(General test conditions)	-	0	-
Annex-A(Additional requirements for apparatus with protection against splashing water)	-	2000	-
Annex-B(Apparatus to be connected to the TELECOMMUNICATION NETWORKS)	-	0	-
Annex-L(Additional requirements for electronic flash apparatus for photographic purposes)	-	0	-
Cl.5.1 of Cl.5(General requirements)	-	0	-
Cl.5.1-i) of Cl.5(Comprehensible and easily discernible)	-	0	-
Cl.5.1-ii) of Cl.5(Permanent durability against water and petroleum spirit)	-	0	-
Cl.5.2 of Cl.5(Identification and supply ratings)	-	0	-
Cl.5.2 a) of Cl.5(Identification, maker)	-	0	-
Cl.5.2 b) of Cl.5(Model number or type reference)	-	0	-
Cl.5.2 d) of Cl.5(Nature of supply)	-	0	-
Cl.5.2 e) of Cl.5(Rated supply voltage)	-	0	-
Cl.5.2 f) of Cl.5(Mains frequency if safety dependant)	-	0	-
Cl.5.2 g) of Cl.5(Rated current or power consumption for apparatus supplied by supply apparatus for general use, on apparatus or in instruction manual: Measured current or power consumption: Deviation % (max 10%):)	-	0	-
Cl.5.2 h) of Cl.5(Rated current or power consumption for apparatus intended for connection to an a.c. mains supply:Measured current or power consumption for Television set: Deviation % (max 10%):)	-	0	-
Cl.5.2 h)-i) of Cl.5(appliance coupler for Class I is used for Class II equipment with functional earth connection, the requirements of Clause 15 and Clause 16 related to Class I construction shall be applied up to the connecting point of the protective(earthing) conductor to the functional earth.)	-	0	-
Cl.5.2 h)-ii) of Cl.5(Graphical symbols placed on the apparatus, whether required by this standard or not, shall be in accordance with IEC 60417 or ISO 3864-2 or ISO 7000, if available. In the absence of suitable symbols, the manufacturer may design specific graphical symbols.)	-	0	-
Cl.5.2 h)-iii) of Cl.5(Care shall be taken so that additional markings and instructions not required by this standard do not contradict the markings and instructions required by this standard . Symbols placed on the Equipment shall be explained in the user manual.)	-	0	-
Cl.5.3 of Cl.5(Terminals)	-	0	-
Cl.5.3a) of Cl.5(Earth terminal)	-	0	-
Cl.5.3b) of Cl.5(Hazardous live terminals)	-	0	-
Cl.5.3c) of Cl.5(Markings on supply output terminals)	-	0	-
Cl.5.4 of Cl.5(Caution marking)	-	0	-
Cl.5.4a) of Cl.5(Use of triangle with exclamation mark)	-	0	-
Cl.5.4b) of Cl.5(Marking on loudspeaker grille, IEC 60417-5036)	-	0	-
Cl.5.4c) of Cl.5(User-replaceable coin / button cell battery marking)	-	0	-
Cl.5.5 of Cl.5(Instructions)	-	0	-
Cl.5.5 of Cl.5(Instructions)	-	0	-
Cl.5.5 of Cl.5(Instructions)	-	0	-
Cl.5.5.1 of Cl.5.5(Safety relevant information)	-	0	-
Cl.5.5.2 a) of Cl.5.5(Mains powered equipment not exposed to dripping or splashing. Warning concerning objects filled with liquid, etc.)	-	0	-
Cl.5.5.2 b) of Cl.5.5(Hazardous live terminals, instructions for wiring)	-	0	-
Cl.5.5.2 c) of Cl.5.5(Instructions for replacing lithium battery)	-	0	-
Cl.5.5.2 d) of Cl.5.5(Class I earth connection warning)	-	0	-
Cl.5.5.2 e) of Cl.5.5(Instructions for multimedia system connection)	-	0	-
Cl.5.5.2 f) of Cl.5.5(Special stability warning for attachment of the apparatus to the floor/wall)	-	0	-
Cl.5.5.2 g) of Cl.5.5(Warning: battery exposure to heat)	-	0	-
Cl.5.5.2 h) of Cl.5.5(Warning: protective film on CRT face)	-	0	-
Cl.5.5.2 i) of Cl.5.5("Warning: Non-floor standing TV >7kg")	-	0	-
Cl.5.5.2 j) of Cl.5.5("Warning: User replaceable coin / button cell battery")	-	0	-
Cl.5.5.3 (a-b) of Cl.5.5(Disconnect device: plug/coupler or all-pole mains switch location, accessibility and markings)	-	0	-
Cl.5.5.3 c) of Cl.5.5(Instructions for permanently connected equipment)	-	0	-
Cl.5.5.3 c) i) of Cl.5.5(Marking, signal lamps or similar for completely disconnection from the mains)	-	0	-
Cl.7.1 of Cl.7(General)	-	0	-
"Cl.7.1.1 of Cl.7.1 Table-3"(Requirements)	-	0	-
"Cl.7.1.2 of Cl.7.1 Table-3"(Accessible parts)	-	0	-
"Cl.7.1.3 of Cl.7.1 Table-3"(Parts, other than windings and printed boards, providing electrical insulation)	-	0	-
"Cl.7.1.4 of Cl.7.1 Table-3"(Parts acting as a support or a mechanical barrier)	-	0	-
"Cl.7.1.5 of Cl.7.1 Table-3"(Windings)	-	0	-
"Cl.7.1.6 of Cl.7.1 Table-3"(Parts not subject to a limit under7.1.1 to 7.1.4)	-	0	-
Cl.7.2 of Cl.7(Softening temperature of insulating material supporting parts conductively connected to the mains carrying a current> 0.2 A, shall be at least 150ºC)	-	0	-
Cl.8.1 of Cl.8(Conductive parts covered by lacquer, paper, untreated textile oxide films and beads etc. considered to be bare*)	-	0	-
Cl.8.2 of Cl.8(No shock hazard when changing voltage setting device, fuse-links or handling drawers etc.)	-	0	-
Cl.8.3 of Cl.8(Insulation of hazardous live parts not provided by hygroscopic material)	-	0	-
Cl.8.4 of Cl.8(No risk of electric shock from accessible parts or from parts rendered accessible following the removal of a cover which can be removed by hand)	-	0	-
Cl.8.5 of Cl.8(Class I apparatus*)	-	0	-
Cl.8.5 i) of Cl.8(Basic insulation between hazardous live parts and earthed accessible parts *)	-	0	-
Cl.8.5 ii) of Cl.8(Resistors bridging basic insulation shall complying with 14.1 a) *)	-	0	-
Cl.8.5 iii) of Cl.8(Capacitors bridging basic insulation shall complying with 14.2.1 a) *)	-	0	-
Cl.8.5 iv) of Cl.8(Protective earthing terminal *)	-	0	-
Cl.8.6 of Cl.8(Class II apparatus)	-	0	-
Cl.8.6 a) of Cl.8(Basic and supplementary insulation between hazardous live parts and accessible parts *)	-	0	-
Cl.8.6 b) of Cl.8(Reinforced insulation between hazardous live parts and accessible parts *)	-	0	-
Cl.8.7 of Cl.8(Components bridging insulation)	-	0	-
Cl.8.7 i) of Cl.8(Basic insulation bridged by components complying with 14.4.5.3)	-	0	-
Cl.8.7 ii) of Cl.8(Components bridging basic, supplementary, double or reinforced insulation complying with 14.2 a) or 14.4)	-	0	-
Cl.8.7 iii) of Cl.8(Basic and supplementary insulation each being bridged by a capacitor or RC-unit complying with 14.3.2 a))	-	0	-
Cl.8.7 iv) of Cl.8(Double or reinforced insulation being bridged with 2 capacitors or RC-units in series complying with 14.3.2 a))	-	0	-
Cl.8.7 v) of Cl.8(Double or reinforced insulation being bridged with a single capacitor or RC-unit complying with 14.3.2 b))	-	0	-
Cl.8.8 of Cl.8(Insulation thickness and thin sheet materials)	-	0	-
Cl.8.8 i) of Cl.8(Basic or supplementary insulation > 0,4 mm (mm)*)	-	0	-
Cl.8.8 ii) of Cl.8(Reinforced insulation > 0,4 mm (mm) *)	-	0	-
Cl.8.8 iii) of Cl.8(Thin sheet material used inside the equipment)	-	0	-
Cl.8.8 iv) of Cl.8(Basic or supplementary insulation, atleast two layers, each meeting10.4)	-	0	-
Cl.8.8 v) of Cl.8(Basic or supplementary insulation, three layers any two of which meet10.4)	-	0	-
Cl.8.8 vi) of Cl.8(Reinforced insulation, two layers each of which meet 10.4)	-	0	-
Cl.8.9 of Cl.8(Adequate insulation between internal hazardous live conductors and accessible parts, or between internal hazardous live parts and conductors connected to accessible parts)	-	0	-
Cl.8.10 of Cl.8(Double insulation between accessible parts and conductors connected to the mains)	-	0	-
Cl.8.10 of Cl.8(Double insulation between conductors connected to accessible parts and parts connected to the mains)	-	0	-
Cl.8.11 of Cl.8(Detaching of wires)	-	0	-
Cl.8.11 i) of Cl.8(Noun due reduction of creepage or clearance distances if wires become detached)	-	0	-
Cl.8.11 ii) of Cl.8(Vibration test carried out)	-	0	-
Cl.8.12 of Cl.8(Adequate fastening of windows, lenses, lamp covers etc. (pull test 20 N for 10 s))	-	0	-
Cl.8.13 of Cl.8(Adequate fastening of windows, lenses, lamp covers etc. (pull test 20 N for 10 s))	-	0	-
Cl.8.14 of Cl.8(No risk of damage to the insulation of internal wiring due to hot parts or sharp edges)	-	0	-
Cl.8.15 of Cl.8(Only special supply equipment can be used*)	-	0	-
Cl.8.18 of Cl.8(Disconnection from the mains)	-	0	-
Cl.8.18 i) of Cl.8(Disconnect device used in apparatus)	-	0	-
Cl.8.18 ii) of Cl.8(All-pole switch or circuit breaker with >3mm contact separation.)	-	0	-
Cl.8.18 iii) of Cl.8(Mains switch ON indication *)	-	0	-
Cl.8.19 of Cl.8(Switch not fitted in the mains cord *)	-	0	-
Cl.8.20 of Cl.8(Bridging components comply with clause 14)	-	0	-
Cl.8.21 of Cl.8(Non-separable thin sheet material)	-	0	-
Cl.9.1 of Cl.9(Testing on the outside)	-	0	-
Cl.9.1.1 of Cl.9.1(Requirements)	-	0	-
Cl.9.1.1 i) of Cl.9.1(Accessible parts shall not be hazardous live)	-	0	-
Cl.9.1.1 ii) of Cl.9.1(Inaccessible terminals are not accessible or comply with relevant requirements)	-	0	-
Cl.9.1.1 iii) of Cl.9.1(For voltages >1000 V ac or >1500 V dc complies with clause 13.3.1 for basic insulation)	-	0	-
Cl.9.1.1.2 of Cl.9.1.1(Determination of hazardous live parts)	-	0	-
Cl.9.1.1.2 a) of Cl.9.1.1(Open circuit voltages)	-	0	-
Touch current measured from terminal devices using the network in annex D(Touch current measured from terminal devices using the network in annex D)	-	0	-
Cl.9.1.1.2 c) of Cl.9.1.1(The charge exceeds 45 μC)	-	0	-
Cl.9.1.1.2 d) of Cl.9.1.1(Energy of discharge not exceeding 350 mJ)	-	0	-
Cl.9.1.1.3 of Cl.9.1.1(Test with test finger and test probe)	-	0	-
Cl.9.1.2 of Cl.9.1(Shafts of operating knobs, handles, levers and the like)	-	0	-
Cl.9.1.3 of Cl.9.1(Openings ofthe enclosure)	-	0	-
Cl.9.1.4 of Cl.9.1(Terminals)	-	0	-
Cl.9.1.4 i) of Cl.9.1(Terminals)	-	0	-
Cl.9.1.4 ii) of Cl.9.1(Terminals)	-	0	-
Cl.9.1.5 of Cl.9.1(Pre-set controls)	-	0	-
Cl.9.1.6 of Cl.9.1(Withdrawal of the mains plug:)	-	0	-
Cl.9.1.6 i) of Cl.9.1(Withdrawal of the mains plug:)	-	0	-
Cl.9.1.6 ii) of Cl.9.1(Withdrawal of the mains plug:)	-	0	-
Cl.9.1.6 iii) of Cl.9.1(Withdrawal of the mains plug:)	-	0	-
Cl.9.1.7 of Cl.9.1(Resistance to external forces)	-	0	-
Cl.9.1.7 a) of Cl.9.1(Resistance to external forces)	-	0	-
Cl.9.1.7 b) of Cl.9.1(Resistance to external forces)	-	0	-
Cl.9.1.7 c) of Cl.9.1(Resistance to external forces)	-	0	-
Cl.9.2 of Cl.9(Removal of protective covers)	-	0	-
Cl.10.2 of Cl.10(Surge Test)	-	0	-
Cl.10.2 a) of Cl.10(Surge Test)	-	0	-
Cl.10.2 b) of Cl.10(Surge Test)	-	0	-
Cl.10.2 b) (i) of Cl.10(Surge Test)	-	0	-
Cl.10.2 b) (ii) of Cl.10(Surge Test)	-	0	-
Cl.10.2 b) (iii) of Cl.10(Surge Test)	-	0	-
Cl.10.3 of Cl.10(Humidity treatment)	-	0	-
Cl.10.4 of Cl.10(Insulation resistance and dielectric strength)	-	0	-
Cl.10.4.1 of Cl.10.4(Insulation of the insulating materials)	-	0	-
Cl.10.4.2 of Cl.10.4(Between parts of different polarity directly connected to the mains Between parts of different polarity directly connected to the mains)	-	0	-
Cl.10.4.2 i) of Cl.10.4(Between parts separated by BASIC or SUPPLEMENTARY insulation)	-	0	-
Cl.10.4.2 ii) of Cl.10.4(Between parts separated by REINFORCED insulation)	-	0	-
Cl.11.1 of Cl.11(Electric Shock Hazard)	-	0	-
Cl.11.1 a) of Cl.11(Electric Shock Hazard)	-	0	-
Cl.11.1 b) of Cl.11(Electric Shock Hazard)	-	0	-
Cl.11.2 of Cl.11(Heating)	-	0	-
Cl.11.2.1 of Cl.11.2(Requirements)	-	0	-
Cl.11.2.1 i) of Cl.11.2(No danger of fire to the surroundings)	-	0	-
Cl.11.2.1 ii) of Cl.11.2(Safety not impaired by abnormal heat)	-	0	-
Cl.11.2.1 of Cl.11.2(Flames extinguish within 10 seconds)	-	0	-
Cl.11.2.1 of Cl.11.2(No hazard from softening solder)	-	0	-
Cl.11.2.1 of Cl.11.2(Soldered terminations not used as protective mechanism)	-	0	-
Cl.11.2.2 of Cl.11.2(Measurement of temperature rises)	-	0	-
Cl.11.2.3 of Cl.11.2(Accessible parts)	-	0	-
Cl.11.2.4 of Cl.11.2(Parts, other than windings and printed boards, providing electrical insulation)	-	0	-
Cl.11.2.5 of Cl.11.2(Parts acting as a support or a mechanical barrier)	-	0	-
Cl.11.2.6 of Cl.11.2(Windings )	-	0	-
Cl.11.2.7 of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.7 i) of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.7 i) a) of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.7 i) b) of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.7 ii) of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.7 iii) of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.8 of Cl.11.2(Parts not subject to a limit under7.1.1 to 7.1.4)	-	0	-
Cl.12.1.1 of Cl.12.1(Requirements)	-	0	-
Cl.12.1.2 of Cl.12.1(Bump test )	-	0	-
Cl.12.1.3 of Cl.12.1(Vibration test)	-	0	-
Cl.12.1.4 of Cl.12.1(Impact test)	-	0	-
Cl.12.1.4 i) of Cl.12.1(Impact test)	-	0	-
Cl.12.1.4 ii) of Cl.12.1(Impact test)	-	0	-
Cl.12.1.5 of Cl.12.1(Drop test)	-	0	-
Cl.12.1.6 of Cl.12.1(Stress relief test)	-	0	-
Cl.12.2 of Cl.12(Fixing of actuating elements)	-	0	-
Cl.12.3 of Cl.12(Remote control devices held in hand)	-	0	-
Cl.12.4 of Cl.12(Drawers )	-	0	-
Cl.12.5 of Cl.12(Antenna coaxial sockets mounted on the apparatus)	-	0	-
Cl.12.5 a) of Cl.12(Endurance test,)	-	0	-
Cl.12.5 b) of Cl.12(Impact test,)	-	0	-
Cl.12.5 c) of Cl.12(Torque test)	-	0	-
Cl.12.6 of Cl.12(Telescoping or rod antennas)	-	0	-
Cl.12.6.1 of Cl.12.6(General requirements)	-	0	-
Cl.12.6.1 i) of Cl.12.6(General requirements)	-	0	-
Cl.12.6.2 of Cl.12.6(Physical securement)	-	0	-
Cl.12.7 of Cl.12(Apparatus containing coin / button cell batteries)	-	0	-
Cl.12.7.1 of Cl.12.7(Coin/button cell batteries with a diameter of 32 mm or less.)	-	0	-
Cl.12.7.2 of Cl.12.7(Construction requirementss)	-	0	-
Cl.12.7.3 of Cl.12.7(Tests)	-	0	-
Cl.12.7.3.2 of Cl.12.7.3(Stress relief test)	-	0	-
Cl.12.7.3.3 of Cl.12.7.3(Battery replacement test)	-	0	-
Cl.12.7.3.4 of Cl.12.7.3(Drop test)	-	0	-
Cl.12.7.3.5 of Cl.12.7.3(Impact test)	-	0	-
Cl.12.7.3.6 of Cl.12.7.3(Crush test)	-	0	-
Cl.12.7.4 of Cl.12.7(Compliance)	-	0	-
Cl.13.1 of Cl.13(General)	-	0	-
Cl.13.2 of Cl.13(Determination of Working voltage)	-	0	-
Cl.13.3 of Cl.13(Clearances)	-	0	-
Cl.13.3.1 of Cl.13.3(General)	-	0	-
Cl.13.3.2 of Cl.13.3(Clearances in circuits conductively connected to the mains)	-	0	-
Cl.13.3.3 of Cl.13.3(Clearances in circuits not conductively connected to the mains)	-	0	-
Cl.13.3.4 of Cl.13(Measurement of transient voltages)	-	0	-
Cl.13.4 a) of Cl.13(Creepage distances )	-	0	-
Cl.13.4 b) of Cl.13(Creepage distances )	-	0	-
Cl.13.4 c) of Cl.13(Creepage distances )	-	0	-
Cl.13.6 a) of Cl.13(Jointed insulation )	-	0	-
Cl.13.6 b) of Cl.13(Jointed insulation )	-	0	-
Cl.13.6 c) of Cl.13(Jointed insulation )	-	0	-
Cl.13.6 d) of Cl.13(Jointed insulation )	-	0	-
Cl.13.7 of Cl.13(Enclosed and sealed parts)	-	0	-
Cl.13.8 of Cl.13(Parts filled with insulating compound, meeting the requirements of 8.8)	-	0	-
Cl.15.1 of Cl.15(Plugs and Sockets*)	-	0	-
Cl.15.1.1 of Cl.15.1(Plugs and Sockets*)	-	0	-
Cl.15.1.1 i) of Cl.15.1(Plugs and Sockets*)	-	0	-
Cl.15.1.1 ii) of Cl.15.1(Plugs and Sockets*)	-	0	-
Cl.15.1.2 of Cl.15.1(Design of connectors other than for mains power *)	-	0	-
Cl.15.1.2 i) of Cl.15.1(Design of sockets with symbol of 5.3 b) design *)	-	0	-
Cl.15.1.3 of Cl.15.1(Design of terminals and connectors used in output circuits of supply apparatus*)	-	0	-
Cl.15.2 of Cl.15(Provisions for protective earthing)	-	0	-
Cl.15.2 i) of Cl.15(Provisions for protective earthing)	-	0	-
Cl.15.2 ii) of Cl.15(Provisions for protective earthing)	-	0	-
Cl.15.2 iii) of Cl.15(Provisions for protective earthing)	-	0	-
Cl.15.2 iv) of Cl.15(Provisions for protective earthing)	-	0	-
Cl.15.2 v) of Cl.15(Provisions for protective earthing)	-	0	-
Cl.15.3 of Cl.15(Terminals for external flexible cords and for permanent connection to the mains supply*)	-	0	-
Cl.15.3.1 of Cl.15.3(Adequate terminals for connection of permanent wiring*)	-	0	-
Cl.15.3.2 of Cl.15.3(Reliable connection of non-detachable cords)	-	0	-
Cl.15.3.2 i) of Cl.15.3(Not soldered to conductors of a printed circuit board)	-	0	-
Cl.15.3.2 ii) of Cl.15.3(Adequate clearances and creepage distances between connections should a wire break away)	-	0	-
Cl.15.3.2 iii) of Cl.15.3(Wire secured by additional means to the conductor)	-	0	-
Cl.15.3.3 of Cl.15.3(Screws and nuts clamping conductors have adequate threads: ISO 261, ISO 262 or similar*)	-	0	-
Cl.15.3.4 of Cl.15.3(Conductors adequately fixed (two independent fixings) *)	-	0	-
Cl.15.3.5 of Cl.15.3(Terminals allow connection of conductors having appropriate cross-sectional area)	-	0	-
Cl.15.3.6 of Cl.15.3(Terminals to 15.3.3 have sizes required by table 16)	-	0	-
Cl.15.3.7 of Cl.15.3(Terminals clamp conductors between metal and have adequate pressure)	-	0	-
Cl.15.3.7 i) of Cl.15.3(Terminals designed to avoid conductor slipping out when tightened)	-	0	-
Cl.15.3.7 ii) of Cl.15.3(Terminals adequately fixed when tightened or loosened (no loosening, wiring not stressed, distances not reduced))	-	0	-
Cl.15.3.8 of Cl.15.3(Terminals carrying a current more than)	-	0	-
Cl.15.3.8 i) of Cl.15.3(0.2 A, contact pressure not transmitted by insulating material except ceramic*)	-	0	-
Cl.15.3.9 of Cl.15.3(Termination of non-detachable cords: wires terminated near to each other)	-	0	-
Cl.15.3.9 i) of Cl.15.3(Terminals located and shielded: test with 8 mm strand)	-	0	-
Cl.15.4 of Cl.15(Devices forming a part of the mains plug*)	-	0	-
Cl.15.4.1 of Cl.15.4(No undue strain on mains socket-outlets.)	-	0	-
Cl.15.4.1 i) of Cl.15.4(Device shall be tested on the equipment as per Fig.11: Torque to be applied : 0.25 Nm (Max))	-	0	-
Cl.15.4.2 of Cl.15.4(Device complies with standard for dimensions of mains plugs)	-	0	-
Cl.15.4.3 of Cl.15.4(Device has adequate mechanical strength (tests a,b,c))	-	0	-
Cl.16.1 a) of Cl.16(Mains supply flexible cords shall be sheathed type, complying with IEC 60227 for PVC cords or as per IEC 60245 for synthetic rubber cords)	-	0	-
Cl.16.1 b) of Cl.16(Non-detachable cords for Class I have green/yellow core for protective earth)	-	0	-
Cl.16.2 of Cl.16(Mains cords conductors shall have a nominal cross-sectional area not less than the values given in Table 18, for rated current consumption of the apparatus)	-	0	-
Cl.16.3 a) of Cl.16(Flexiblecordsnotcomplyingwith16.1, used for interconnections between separate units of equipment used in combination and carrying hazardous live voltages, have adequate dielectric strength as perCl.10.3)	-	0	-
Cl.16.4 of Cl.16(Flexible cords used for connection between equipment have adequate cross-sectional areas to avoid temperature rise under normal and fault conditions)	-	0	-
Cl.16.5 a) of Cl.16(Adequate strain relief on external flexible cords)	-	0	-
Cl.16.5 b) of Cl.16(Not possible to push cord back into equipment)	-	0	-
Cl.16.5 c) of Cl.16(Strain relief device unlikely to damage flexible cord)	-	0	-
Cl.16.5 d) of Cl.16(For mains cords of Class I equipment, hazardous live conductors become taut before earth conductor)	-	0	-
Cl.16.6 of Cl.16(Apertures for external flexible cord: no risk of damage to the cord during assembly or movement in use)	-	0	-
Cl.16.7 a) of Cl.16(Transportable apparatus fitted with detachable cord sets with appliance inlet as perIEC60320-1 or)	-	0	-
Cl.16.7 b) of Cl.16(Transportable apparatus shall have a means of stowage to protect the cord)	-	0	-
17.1 a) of Cl.17(Screws are loosened and then tightened with a torque according to table20)	-	0	-
Cl.17.1 b) of Cl.17(5 times in the case of screws operating in a thread of metal)	-	0	-
Cl.17.1 c) of Cl.17(10 times in the case of screws operating in wood or in a thread in insulating material:)	-	0	-
Cl.17.2 of Cl.17(Correct introduction of screws into female threads in non-metallic material)	-	0	-
Cl.17.3 a) of Cl.17(Screws or other fixing devices intended to fix Covers, legs, stands or the like, shall be captive in order to prevent replacement during servicing by screws or other fixing devices……)	-	0	-
Cl.17.3 b) of Cl.17(Non-captive fixing screws: no hazard when replaced by a screw whose length is 10 times its diameter)	-	0	-
Cl.17.4 of Cl.17(No loosening of conductive parts carrying a current > 0.2 A)	-	0	-
Cl.17.5 of Cl.17(Contact pressure not transmitted through plastic other than ceramic for connections carrying a current > 0.2 A*)	-	0	-
Cl.17.6 of Cl.17(Stranded conductors of flexible supply cords carrying a current > 0.2 A with screw terminals not consolidated by solder *)	-	0	-
Cl.17.7 of Cl.17(Cover fixing devices other than screws have adequate strength and their positioning is unambiguous)	-	0	-
Cl.17.8 of Cl.17(Detachable legs or stands supplied by the manufacturer of the apparatus shall be delivered with the relevant fixing means *)	-	0	-
Cl.17.9 a) of Cl.17(Internal pluggable connections, affecting safety, unlikely to become disconnected)	-	0	-
Cl.17.9 b) of Cl.17(By applying a 2N pull force in any direction to the connection, in case of doubt)	-	0	-
Cl.19.1 of Cl.19(Stability and mechanical hazards)	-	0	-
Cl.19.1 of Cl.19(Stability requirements)	-	0	-
Cl.19.1 i) of Cl.19(Stability requirements)	-	0	-
Cl.19.2 of Cl.19(Test at 10° to the horizontal)	-	0	-
Cl.19.3 of Cl.19(Vertical force test )	-	0	-
Cl.19.4 of Cl.19(Horizontal force test)	-	0	-
Cl.19.5 of Cl.19(Test of edges and corners)	-	0	-
Cl.19.6 of Cl.19(Mechanical strength of glass)	-	0	-
Cl.19.6.1 of Cl.19.6(Requirements)	-	0	-
Cl.19.6.2 of Cl.19.6(Fragmentation test)	-	0	-
Cl.19.7 of Cl.19(Wall or ceiling mounting means)	-	0	-
Cl.19.7.1 of Cl.19..7(Requirements)	-	0	-
Cl.19.7.3 of Cl.19.7(Compliance)	-	0	-
Cl.20.1 of Cl.20(Requirements)	-	0	-
Cl.20.2 of Cl.20(Electrical components and mechanical parts)	-	0	-
Cl.20.2.1 a) of Cl.20.2(Exemption for components contained in an enclosure of material V-0 to IEC60695- 11-10 with openings not exceeding 1 mm in width)	-	0	-
Cl.20.2.1 b) of Cl.20.2(Exemption for small components)	-	0	-
Cl.20.2.2 of Cl.20.2(Electrical components )	-	0	-
Cl.20.2.3 of Cl.20.2(Internal wiring)	-	0	-
Cl.20.2.4 of Cl.20.2(Printed boards)	-	0	-
Cl.20.2.4 i) of Cl.20.2(Printed boards)	-	0	-
Cl.20.2.5 of Cl.20.2(Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4)	-	0	-
Cl.20.2.5 i) of Cl.20.2(Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4)	-	0	-
Cl.20.2.5 ii) of Cl.20.2(Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4)	-	0	-
Cl.20.3 of Cl.20(Fire enclosure*)	-	0	-
Cl.20.3.1 of Cl.20.3(Fire enclosure*)	-	0	-
Cl.20.3.2 of Cl.20.3(Fire enclosure*)	-	0	-
Cl.20.3.3 of Cl.20.3(Fire enclosure*)	-	0	-

11 Mar, 2027

-
Included w.e.f. 11.06.2024 Exclusion: Cl.14 (Components), Cl.6.1 (Ionizing radiation), Cl. 6.2 (Laser Radiation), Cl. 8.16/ H 2.2/ H 2.3 (Requirements for insulated winding wires for use without additional interleaved insulation), Cl. 8.16 (Wound Component), Cl. 16.3b (Cord Bending Test), Cl. 18 (Mechanical strength of Picture tubes and protection against the effect of implosion), Cl. Cl.8.16 of Cl.8 (Insulated winding wire without additional interleaved insulation)

9668

ABSOLUTE EXPERTISE TESTING LABORATORY LLP

8176726

IS 15885 : Part 2 : Sec 13 (2012)

Safety of lamp controlgear: Part 2 particular requirements: Sec 13 d.c. or a.c. supplied electronic controlgear for led modules

42000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	1000	-
8(Protection against accidental contact with live parts)	-	1500	-
9(Terminals)	-	1500	-
10(PROVISION FOR EARTHING)	-	1500	-
11(MOISTURE RESISTANCE)	-	2000	-
12(Electric Strength)	-	1500	-
13(Thermal endurance test for winding of ballasts)	-	0	-
14(Fault conditions)	-	2000	-
15(Transformer heating)	-	2000	-
16(Construction)	-	1000	-
17(Creepage distance and clearances)	-	2000	-
18(Screws, current carrying parts and connections)	-	2000	-
19(Resistance to heat, fire and tracking)	-	2000	-
20(Resistance to corrosion)	-	1000	-
7(Marking)	-	1000	-
8("PROTECTION AGAINST ACCIDENTAL CONTACT WITH LIVE PARTS")	-	1500	-
9(TERMINALS)	-	1500	-
10(PROVISIONS FOR PROTECTIVE EARTHING)	-	1500	-
11(MOISTURE RESISTANCE AND INSULATION)	-	2000	-
12(ELECTRIC STRENGTH)	-	1500	-
14(FAULT CONDITIONS)	-	2000	-
15(TRANSFORMER HEATING)	-	2000	-
16(CONSTRUCTION)	-	1000	-
17(CREEPAGE DISTANCES AND CLEARANCES)	-	2000	-
18("SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS")	-	2000	-
19(RESISTANCE TO HEAT, FIRE AND TRACKING)	-	2000	-
20(RESISTANCE TO CORROSION)	-	1000	-
4(GENERAL REQUIREMENTS)	-	0	-
5(GENERAL NOTES ON TESTS)	-	0	-
6(CLASSIFICATION)	-	0	-
19(Terminals)	-	0	-
7(Marking)	-	-	-
8(Protection against accidental contact with live parts)	-	-	-
9(Terminals)	-	-	-
10(PROVISION FOR EARTHING)	-	-	-
11(MOISTURE RESISTANCE)	-	-	-
12(Electric Strength)	-	-	-
13(Thermal endurance test for winding of ballasts)	-	-	-
14(Fault conditions)	-	-	-
15(Transformer heating)	-	-	-
16(Construction)	-	-	-
17(Creepage distance and clearances)	-	-	-
18(Screws, current carrying parts and connections)	-	-	-
19(Resistance to heat, fire and tracking)	-	-	-
20(Resistance to corrosion)	-	-	-
7(Marking)	-	-	-
8("PROTECTION AGAINST ACCIDENTAL CONTACT WITH LIVE PARTS")	-	-	-
9(TERMINALS)	-	-	-
10(PROVISIONS FOR PROTECTIVE EARTHING)	-	-	-
11(MOISTURE RESISTANCE AND INSULATION)	-	-	-
12(ELECTRIC STRENGTH)	-	-	-
14(FAULT CONDITIONS)	-	-	-
15(TRANSFORMER HEATING)	-	-	-
16(CONSTRUCTION)	-	-	-
17(CREEPAGE DISTANCES AND CLEARANCES)	-	-	-
18("SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS")	-	-	-
19(RESISTANCE TO HEAT, FIRE AND TRACKING)	-	-	-
20(RESISTANCE TO CORROSION)	-	-	-
4(GENERAL REQUIREMENTS)	-	-	-
5(GENERAL NOTES ON TESTS)	-	-	-
6(CLASSIFICATION)	-	-	-
19(Terminals)	-	-	-

11 Mar, 2027

-
Included w.e.f. 11.06.2024 Exclusion: Cl. 16 (Enclosures, (Bridging resistor in primary circuit, Capacitor and RC units, RF suppression (X-Y capacitors), Inductor, MOV/VDR, SMPS/Mains Transformer, PCB material, Insulated tape, Heat shrinkage sleeve, Connector, Fuse, Internal wire, LED, Opto-coupler, EMI/EMC filter, Winding wire, Thin sheet materials), Cl. 19 (Metal base PCB for LED, Transparent cover, Bobbin)

9669

ABSOLUTE EXPERTISE TESTING LABORATORY LLP

8176726

IS 16103 : Part 1 (2012)

Led modules for general lighting: Part 1 safety requirements

31500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	1000	-
8(Terminals)	-	3000	-
9(PROVISION FOR EARTHING)	-	2000	-
10(Protection against accidental contact with live parts)	-	2000	-
11(Mositure Resistance and Insulation)	-	3000	-
12(Electric Strength)	-	2000	-
13(Fault conditions)	-	4000	-
15(Construction)	-	2000	-
16(Creepage distance and clearances)	-	2000	-
17(Screws, current carrying parts and connections)	-	2500	-
18(Resistance to heat, fire and tracking)	-	4000	-
19(Resistance to corrosion)	-	3000	-
21(Heat management)	-	1000	-
21(Heat management)	-	0	-

11 Mar, 2027

-
Included w.e.f. 11.06.2024

9670

ABSOLUTE EXPERTISE TESTING LABORATORY LLP

8176726

IS 10322 : Part 5 : Sec 9 (2017)

Luminaires: Part 5 particular requirements: Sec 9 rope lights

48000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
21.4(General Test Requireements)	-	1000	-
21.5(Classification of Luminaires')	-	1000	-
21.6(Marking)	-	3000	-
21.7(Construction)	-	3000	-
21.8(Creepage Distance and Clearances)	-	4000	-
21.9(Provision for earthing)	-	0	-
21.10(Terminals)	-	4000	-
21.11(External & Internal Wiring)	-	4000	-
21.12(Protection against electric shock)	-	5000	-
21.13(Endurance Tests and Thermal Tests)	-	5000	-
21.14(Resistance to Dust & Moisture)	-	5000	-
21.15(Insulation Resistance and Electric Strength)	-	5000	-
21.16(Resistance to Heat , fire and tracking)	-	5000	-
21.7.1(General)	-	500	-
21.7.3(Terminals and supply connections)	-	500	-
21.7.4(Control units)	-	500	-
21.7.5(Mechanical strength)	-	1500	-

11 Mar, 2027

-
Included w.e.f. 11.06.2024

9671

ABSOLUTE EXPERTISE TESTING LABORATORY LLP

8176726

IS 10322 : Part 5 : Sec 7 (2017)

Luminaires: Part 5 particular requirements: Sec 7 lighting chains (First Revision)

48000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
20.4(General Test Requireements)	-	1000	-
20.5(Classification of Luminaires')	-	1000	-
20.6(Marking)	-	3000	-
20.7(Construction)	-	6000	-
20.8(Creepage Distance and Clearances)	-	4000	-
20.9(Provision for earthing)	-	0	-
20.10(Terminals)	-	4000	-
20.11(External & Internal Wiring)	-	4000	-
20.12(Protection against electric shock)	-	5000	-
20.13(Endurance Tests and Thermal Tests)	-	5000	-
20.14(Resistance to Dust & Moisture)	-	5000	-
20.15(Insulation Resistance and Electric Strength)	-	5000	-
20.16(Resistance to Heat , fire and tracking)	-	5000	-

11 Mar, 2027

-
Included w.e.f. 11.06.2024

9672

ABSOLUTE EXPERTISE TESTING LABORATORY LLP

8176726

IS 10322 : Part 5 : Sec 6 (2013)

Luminaires: Part 5 particular requirements: Sec 6 handlamps

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	1000	-
5(Classification of Luminaires')	-	1000	-
6.0(Marking)	-	3000	-
7.0(Construction)	-	6000	-
8.0(Creepage Distance and Clearances)	-	4000	-
10.0(Terminals)	-	4000	-
9.0(Provision for earthing)	-	0	-
11.0(External & Internal Wiring)	-	4000	-
12.0(Protection against electric shock)	-	4000	-
13.0(Endurance Tests and Thermal Tests)	-	5000	-
14.0(Resistance to Dust & Moisture)	-	4000	-
15.0(Insulation Resistance and Electric Strength)	-	4000	-
16.0(Resistance to Heat , fire and tracking)	-	5000	-
8.2(Packing -Each Package shall bear the following Particulars)	-	0	-
8.2(Packing -Each Package shall bear the following Particulars)	-	0	-

11 Mar, 2027

-
Included w.e.f. 11.06.2024

9673

ABSOLUTE EXPERTISE TESTING LABORATORY LLP

8176726

IS 10322 : Part 5 : Sec 1 (2012)

Luminaires: Part 5 particular requirements: Sec 1 fixed general purpose luminaires (First Revision)

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	1000	-
5(Classification of Luminaires')	-	1000	-
6.0(Marking)	-	2000	-
7.0(Construction)	-	5000	-
8.0(Creepage Distance and Clearances)	-	3000	-
9.0(Provision for earthing)	-	2000	-
10.0(Terminals)	-	3000	-
11.0(External & Internal Wiring)	-	3000	-
12.0(Protection against electric shock)	-	3000	-
13.0(Endurance Tests and Thermal Tests)	-	3000	-
14.0(Resistance to Dust & Moisture)	-	3000	-
15.0(Insulation Resistance and Electric Strength)	-	3000	-
16.0(Resistance to Heat , fire and tracking)	-	3000	-
4(General Test Requireements)	-	-	-
5(Classification of Luminaires')	-	-	-
6.0(Marking)	-	-	-
7.0(Construction)	-	-	-
8.0(Creepage Distance and Clearances)	-	-	-
9.0(Provision for earthing)	-	-	-
10.0(Terminals)	-	-	-
11.0(External & Internal Wiring)	-	-	-
12.0(Protection against electric shock)	-	-	-
13.0(Endurance Tests and Thermal Tests)	-	-	-
14.0(Resistance to Dust & Moisture)	-	-	-
15.0(Insulation Resistance and Electric Strength)	-	-	-
16.0(Resistance to Heat , fire and tracking)	-	-	-

11 Mar, 2027

-
Included w.e.f. 11.06.2024 Exclusion: Cl.17.0 (Photometric Test)

9674

ABSOLUTE EXPERTISE TESTING LABORATORY LLP

8176726

IS 16102 : Part 1 (2012)

Self - Ballasted led lamps for general lighting services: Part 1 safety requirements

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking)	-	1000	-
6(Interchangeability)	-	2000	-
7(Protection against accidental contact with live parts)	-	2000	-
8(Insulation Resistance and Electric Strength)	-	2500	-
9(MECHANICAL STRENGTH)	-	2500	-
10(cap temperature)	-	2500	-
11(Resistance to Heat)	-	2000	-
12(Resistance to Flame and Ignition)	-	2000	-
13(Fault conditions)	-	2000	-
14(Creepage distance and clearances)	-	1500	-
4(General requirement and General test requirements)	-	0	-
5(Marking)	-	1000	-
6(Interchangeability)	-	2000	-
7(Protection against accidental contact with live parts)	-	2000	-
8(Strength after humidity treatment)	-	2500	-
9(Mechanical strength)	-	2500	-
10(Cap temperature rise)	-	2500	-
11(Resistance to heat)	-	2000	-
12(Resistance to flame and ignition)	-	2000	-
13(Fault conditions)	-	2000	-
14(Creepage distances and clearances)	-	1500	-
15(Selection of lamps for tests (Sampling))	-	0	-
16(Condition of compliance)	-	0	-
17(Tests)	-	0	-
Annex A(Ovreview of systems composed of LED modules and control gear)	-	0	-
Annex B(Lamps with operating position limitations)	-	0	-
4(GENERAL REQUIREMENT AND GENERAL TEST REQUIREMENTS)	-	0	-

11 Mar, 2027

-
Included w.e.f. 11.06.2024

9675

WELL TECH TEST AND RESEARCH CENTER, DERABASSI

9177306

IS 5522 (2014)

Stainless steel sheets and strips for utensils - Specification (Third Revision)

As per table 1 and 3 of IS 5522

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.1 & 7.2 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
8.2, Table 3(Tensile Test-1608:Part 1)	-	2500	-
8.2, Table 3(Proof Stress, N/mm2)	-	2500	-
8.2, Table 3(Tensile Strength, N/mm2)	-	2500	-
8.2, Table 3(Elongation, %)	-	2500	-
8.3(Hardness , max-IS 1500 or IS 1501 (Part 1) or IS 1586)	-	1000	-
8.4(Bend Test)	-	1000	-
8.5(Erichsen Cupping Test)	-	1000	-
10.1(Thickness, mm)	-	500	-
10.2(width, mm)	-	500	-
10.3(Length, mm)	-	500	-
10.4(Flatness,mm)	-	1000	-
10.5(Camber, mm)	-	1000	-
11(Surface Finish)	-	1000	-
Cl . 6 .0(Freedom from defect)	-	500	-
13(Marking)	-	500	-
Cl. 7.1 & 7.2 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
8.2, Table 3(Tensile Test-1608:Part 1)	-	500	-
8.2, Table 3(Proof Stress, N/mm2)	-	500	-
8.2, Table 3(Tensile Strength, N/mm2)	-	500	-
8.2, Table 3(Elongation, %)	-	500	-
8.3(Hardness , max-IS 1500 or IS 1501 (Part 1) or IS 1586)	-	500	-
8.4(Bend Test)	-	1000	-
8.5(Erichsen Cupping Test)	-	1000	-
10.1(Thickness, mm)	-	500	-
10.2(width, mm)	-	500	-
10.3(Length, mm)	-	500	-
10.4(Flatness,mm)	-	500	-
10.5(Camber, mm)	-	1000	-
11(Surface Finish)	-	1000	-
Cl . 6 .0(Freedom from defect)	-	500	-
13(Marking)	-	500	-
Cl. 7.1 & 7.2 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
8.2, Table 3(Tensile Test-1608:Part 1)	-	2500	-
8.2, Table 3(Proof Stress, N/mm2)	-	2500	-
8.2, Table 3(Tensile Strength, N/mm2)	-	2500	-
8.2, Table 3(Elongation, %)	-	2500	-
8.3(Hardness , max-IS 1500 or IS 1501 (Part 1) or IS 1586)	-	1500	-
8.4(Bend Test)	-	1000	-
8.5(Erichsen Cupping Test)	-	1000	-
10.1(Thickness, mm)	-	500	-
10.2(width, mm)	-	500	-
10.3(Length, mm)	-	500	-
10.4(Flatness,mm)	-	1000	-
10.5(Camber, mm)	-	1000	-
11(Surface Finish)	-	1000	-
Cl . 6 .0(Freedom from defect)	-	500	-
13(Marking)	-	500	-
Cl. 7.1 & 7.2 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1	REPEATED CLAUSE
Cl. 7.1 & 7.2 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1	REPEATED CLAUSE
Cl. 7.1 & 7.2 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1	REPEATED CLAUSE
Cl. 7.1 & 7.2 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1	REPEATED CLAUSE
Cl. 7.1 & 7.2 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1	REPEATED CLAUSE
Cl. 7.1 & 7.2 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1	REPEATED CLAUSE
Cl. 7.1 & 7.2 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1	REPEATED CLAUSE
Cl. 7.1 & 7.2 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1	REPEATED CLAUSE
8.2, Table 3(Tensile Test-1608:Part 1)	-	1	REPEATED CLAUSE
8.2, Table 3(Proof Stress, N/mm2)	-	1	REPEATED CLAUSE
8.2, Table 3(Tensile Strength, N/mm2)	-	1	REPEATED CLAUSE
8.2, Table 3(Elongation, %)	-	1	REPEATED CLAUSE
8.3(Hardness , max-IS 1500 or IS 1501 (Part 1) or IS 1586)	-	1	REPEATED CLAUSE
8.4(Bend Test)	-	1	REPEATED CLAUSE
8.5(Erichsen Cupping Test)	-	1	REPEATED CLAUSE
10.1(Thickness, mm)	-	1	REPEATED CLAUSE
10.2(width, mm)	-	1	REPEATED CLAUSE
10.3(Length, mm)	-	1	REPEATED CLAUSE
10.4(Flatness,mm)	-	1	REPEATED CLAUSE
10.5(Camber, mm)	-	1	REPEATED CLAUSE
11(Surface Finish)	-	1	REPEATED CLAUSE
Cl . 6 .0(Freedom from defect)	-	1	REPEATED CLAUSE
13(Marking)	-	1	REPEATED CLAUSE
Cl. 7.1 & 7.2 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1	REPEATED CLAUSE
Cl. 7.1 & 7.2 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1	REPEATED CLAUSE
Cl. 7.1 & 7.2 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1	REPEATED CLAUSE
Cl. 7.1 & 7.2 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1	REPEATED CLAUSE
Cl. 7.1 & 7.2 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1	REPEATED CLAUSE
Cl. 7.1 & 7.2 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1	REPEATED CLAUSE
Cl. 7.1 & 7.2 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1	REPEATED CLAUSE
Cl. 7.1 & 7.2 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1	REPEATED CLAUSE
8.2, Table 3(Tensile Test-1608:Part 1)	-	1	REPEATED CLAUSE
8.2, Table 3(Proof Stress, N/mm2)	-	1	REPEATED CLAUSE
8.2, Table 3(Tensile Strength, N/mm2)	-	1	REPEATED CLAUSE
8.2, Table 3(Elongation, %)	-	1	REPEATED CLAUSE
8.3(Hardness , max-IS 1500 or IS 1501 (Part 1) or IS 1586)	-	1	REPEATED CLAUSE
8.4(Bend Test)	-	1	REPEATED CLAUSE
8.5(Erichsen Cupping Test)	-	1	REPEATED CLAUSE
10.1(Thickness, mm)	-	1	REPEATED CLAUSE
10.2(width, mm)	-	1	REPEATED CLAUSE
10.3(Length, mm)	-	1	REPEATED CLAUSE
10.4(Flatness,mm)	-	1	REPEATED CLAUSE
10.5(Camber, mm)	-	1	REPEATED CLAUSE
11(Surface Finish)	-	1	REPEATED CLAUSE
Cl . 6 .0(Freedom from defect)	-	1	REPEATED CLAUSE
13(Marking)	-	1	REPEATED CLAUSE

30 Mar, 2027

-
Included w.e.f. 16.05.2024

9676

Wool Research Association, Thane

7182504

IS 8156 (2014)

Fastners for consumer goods - Synthetic hook and loop tape - Specification (Third Revision)

14160 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Material Indentification)	-	1888	Including GST@18%
5.1(Dimensions)	-	472	Including GST@18%
7.1(Colour Fastness)	-	4484	Including GST@18%
7.2(Strength of Tapes (Test for Shear,Peel and Tensile Strength))	-	2360	Including GST@18%
7.3(Shrinkage)	-	1180	Including GST@18%
7.4(Endurance Test)	-	2360	Including GST@18%
7.5(Dot Tear Test)	-	1416	Including GST@18%
6(6 MANUFACTURE, WORKMANSHIP AND FINISH)	-	500	Including GST@18%

18 Nov, 2027

-
Exclusion: Cl.7.4 (Endurance Test)

9677

Hari Shankar Singhania Elastomer and Tyre Research Institute, HASETRI, Mysuru

6183136

IS 9168 (2018)

Automotive vehicle - All rubber flaps for pneumatic tyres - Specification (Second Revision)

Flaps

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Design and Construction)	-	500	-
4(Designation)	-	500	-
5.1.1(Moulded Flap)	-	500	-
5.1.2(Flap with Overlap Joint)	-	500	-
5.2(Hardness)	-	500	-
5.3(Retention of Properties on Ageing)	-	1000	-
6(Marking)	-	500	-
3(Design and Construction)	-	500	-
4(Designation)	-	500	-
5.1.1(Moulded Flap)	-	500	-
5.1.2(Flap with Overlap Joint)	-	500	-
5.2(Hardness)	-	500	-
5.3(Retention of Properties on Ageing)	-	1000	-
6(Marking)	-	500	-

02 Dec, 2027

-
-

9678

RTRC LIMITED, GURUGRAM

9177406

IS 7098 : Part 1 (1988)

Specification for crosslinked polyethylene insulated pvc sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision)

16000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(CONDUCTOR: MATERIALS)	-	0	Additional charges, Rs 1500/- for each additional core. FR-LSH/FR testing charge as applicable.
4(INSULATION : MATERIALS)	-	0	-
5.1(FILLER AND INNER SHEATH)	-	0	-
5.2(FILLER AND INNER SHEATH)	-	0	-
6(ARMOURING)	-	0	-
7(OUTER SHEATH)	-	0	-
8.1(CONDUCTOR: CONSTRUCTION)	-	0	-
8.2(PROTECTIVE BARRIER)	-	0	-
8.3(SIZE OF NEUTRAL CONDUCTOR)	-	0	-
9.1(Insulation Applied by extrusicn)	-	0	-
9.2(Thickness of Insulation - Average)	-	500	-
9.3(Thickness of Insulation - Minimum)	-	0	-
9.4(Application of Insulation)	-	0	-
10.1(Core Identification)	-	0	-
10.2(Core Identification- Neutral)	-	0	-
10.3(Core Identification by number )	-	0	-
10.4(Core Identification by number - Neutral )	-	0	-
11(LAVING UP OF CORES)	-	0	-
12.1 & 12.2(Inner sheath : Application)	-	0	-
12.3(Thickness of Inner Sheath)	-	0	-
13.1(Armouring: Application)	-	0	-
13.1.2(Armouring: Coverage )	-	500	-
13.1.3(Armouring: Direction of Lay )	-	0	-
13.2(Type of armour )	-	0	-
13.3(Armouring : Dimensions -Wire Diameter)	-	500	-
13.3(Armouring : Dimensions -Formed wire )	-	0	-
13.4(Armour: Joint)	-	0	-
13.5(Armouring : Resistance Test)	-	500	-
13.6 a)(ARMOURING: Tensile Strength)	-	500	-
13.6 b)(ARMOURING: Elongation )	-	500	-
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	500	-
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	500	-
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	500	-
13.6 f)(ARMOURING: Mass of zinc coating )	-	500	-
13.6 g)(ARMOURING: Resistivity)	-	500	-
14.1(Outer Sheath : Application)	-	0	-
14.2(Colour of outer sheath)	-	0	-
14.3(Thickness of outer sheath - AVERAGE)	-	500	-
14.3(Thickness of outer sheath - minimum)	-	0	-
15.1 a) i)(Annealing Test ( For copper wire ) )	-	500	as applicable
15.1 a) ii)(Tensile test (for aluminium) - Before stranding )	-	0	as applicable
15.1 a) ii)(Tensile test (for aluminium) - After stranding )	-	0	as applicable
15.1 a) iii)(Wrapping test (for aluminium))	-	0	-
15.1 a) iv)(Resistance test - Main conductor)	-	500	-
15.1 a) iv)(Resistance test - Neutral conductor)	-	0	-
15.1 d) i) (Phyaical tests for insulation : Tensile Test)	-	0	-
15.1 d) i) (Phyaical tests for insulation : Elongation)	-	500	-
15.1 d) ii) (Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	0	-
15.1 d) ii) (Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	500	-
15.1 d) iii) (Phyaical tests for insulation : Hot set )	-	500	-
15.1 d) iii) (Phyaical tests for insulation : Permanent set )	-	0	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage )	-	500	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage - Crack observed )	-	0	-
15.1 d) v) (Insulation: Waterabsorption(gravimetric))	-	500	-
15.1 e) i) (Physical tests for outer sheath : Tensile stregth)	-	500	-
15.1 e) i) (Physical tests for outer sheath : Elongation)	-	500	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	500	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation )	-	500	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	500	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	0	-
15.1 e) iii) (Sheath: Loss of mass in air oven)	-	500	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage )	-	500	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage - Crack observed )	-	0	-
15.1 e) v) (Sheath : Hot deformation)	-	500	-
Cl 16(Halogen Acid Gas Test)	-	0	-
Cl 16(Halogen Acid Gas Test)	-	0	-
Cl 16(Halogen Acid Gas Test)	-	0	-
15.1 e) vi) (Sheath : Heat shock test)	-	500	-
15.1 e) vii) (Sheath : Thermalstability)	-	500	-
15.1 f)(INSULATION RESISTANCE TEST : Volume resistivity )	-	500	-
16.2(HIGH VOLTAGE TEST )	-	500	-
16.3(FLAMMABILITY TEST : Period of Burning )	-	500	-
16.3(FLAMMABILITY TEST : Unaffected length )	-	0	-
16.9(Oxygen Index Test)	-	2500	additional charge, if applicable
16.1(Flame Retardance Test on Single Cables)	-	0	additional charge, if applicable
16.11(Flame Retardance Test on Bunched Cables)	-	5500	additional charge, if applicable
16.13(Test for Halogen Acid Gas Evolution)	-	3500	additional charge, if applicable
16.14(Temperature Index)	-	0	additional charge, if applicable
17.1(Manufacturer'. identification)	-	0	-
17.2(cable Indentification )	-	0	-
17.3(cable Code )	-	0	-
15.4 (a)(Cold bend)	-	1000	as applicable
15.4 (b)(Cold impact)	-	1000	as applicable
Table 1(Ageing in air oven - Elongation on Insulation)	-	0	-
Table 1(Ageing in air oven - Tensile strength on Insulation)	-	0	-
Table 1(Ageing in air oven - Elongation on Insulation)	-	0	-
Table 1(Ageing in air oven - Tensile strength on Insulation)	-	0	-
Table 4(Copper purity test)	-	0	-
Cl No. 16.15(Smoke density test)	-	3500	additional charge, if applicable
Table 2(Cold Impact test for Outer sheath)	-	0	additional charge, if applicable
Table 2(Cold bend test for Outer sheath)	-	0	additional charge, if applicable

03 Apr, 2027

-
Included w.e.f. 24.04.2024

9679

Adityapur Auto Cluster, Adityapur

5178506

IS 10748 (2004)

Hot - Rolled steel strip for welded tubes and pipes - Specification (Second Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8 & Table 3(UTM)	-	12000	-
Cl 9(Press)	-	12000	-
Cl 11(Workmanship)	-	12000	-
Cl 12 & 13(Length, Width & Thickness)	-	12000	-
Cl 8 & Table 3(UTM)	-	12000	-
Cl 9(Press)	-	12000	-
Cl 11(Workmanship)	-	12000	-
Cl 12 & 13(Length, Width & Thickness)	-	12000	-
Cl 8 & Table 3(UTM)	-	12000	-
Cl 9(Press)	-	12000	-
Cl 11(Workmanship)	-	12000	-
Cl 12 & 13(Length, Width & Thickness)	-	12000	-
7.1(Carbon %)	-	12000	-
7.1(Manganese %)	-	12000	-
7.1(Phosphorus %)	-	12000	-
7.1(Sulphur %)	-	12000	-
7.1(Silicon %)	-	12000	-
7.1( Copper %)	-	12000	-
7.1( Aluminium %)	-	12000	-
7.1( Nb)	-	12000	-
7.1(V)	-	12000	-
7.1( Ti)	-	12000	-
7.1(Cr)	-	12000	-
7.1(Mo)	-	12000	-
7.1(Ni)	-	12000	-
7.1( Nitrogen%)	-	12000	-
7.1(CE)	-	12000	-
7.1(Carbon %)	-	12000	-
7.1(Manganese %)	-	12000	-
7.1(Phosphorus %)	-	12000	-
7.1(Sulphur %)	-	12000	-
7.1(Silicon %)	-	12000	-
7.1( Copper %)	-	12000	-
7.1( Aluminium %)	-	12000	-
7.1( Nb)	-	12000	-
7.1(V)	-	12000	-
7.1( Ti)	-	12000	-
7.1(Cr)	-	12000	-
7.1(Mo)	-	12000	-
7.1(Ni)	-	12000	-
7.1( Nitrogen%)	-	12000	-
7.1(CE)	-	12000	-
7.1(Carbon %)	-	12000	-
7.1(Manganese %)	-	12000	-
7.1(Phosphorus %)	-	12000	-
7.1(Sulphur %)	-	12000	-
7.1(Silicon %)	-	12000	-
7.1( Copper %)	-	12000	-
7.1( Aluminium %)	-	12000	-
7.1( Nb)	-	12000	-
7.1(V)	-	12000	-
7.1( Ti)	-	12000	-
7.1(Cr)	-	12000	-
7.1(Mo)	-	12000	-
7.1(Ni)	-	12000	-
7.1( Nitrogen%)	-	12000	-
7.1(CE)	-	12000	-
Table 1 ( Clauses 7.1 ,7.2 )(TITANIUM)	-	12000	-
Table 1 ( Clauses 7.1 ,7.2 )(VANADIUM)	-	12000	-
Table 1 ( Clauses 7.1 ,7.2 )(NIOBIUM)	-	12000	-
Table 1 ( Clauses 7.1 ,7.2 )(CARBON EQUIVELENT )	-	12000	-
Table 1 ( Clauses 7.1 ,7.2 )(Molybdenum)	-	12000	-
Table 1 ( Clauses 7.1 ,7.2 )(Chromium)	-	12000	-
Table 1 ( Clauses 7.1 ,7.2 )(Nickel)	-	12000	-
Table 1 ( Clauses 7.1 ,7.2 )( ALUMINIUM)	-	12000	-
Table 1 ( Clauses 7.1 ,7.2 )(SILICON)	-	12000	-
Table 1 ( Clauses 7.1 ,7.2 )(NITROGEN)	-	12000	-
Table 1 ( Clauses 7.1 ,7.2 )(MANGANESE)	-	12000	-
Table 1 ( Clauses 7.1 ,7.2 )(PHOSPHURS)	-	12000	-
Table 1 ( Clauses 7.1 ,7.2 )(SULPHUR)	-	12000	-
Table 1 ( Clauses 7.1 ,7.2 )( CARBON)	-	12000	-
Cl. 14(Weight)	-	12000	-
Cl. 12, 13(Camber)	-	12000	-
Cl. 12, 13(Thickness)	-	12000	-
Cl. 8, Table 3(Elongation)	-	12000	-
Cl. 8, Table 3(Yield Stress)	-	12000	-
Cl 12 & 13(Length, Width & Thickness)	-	12000	-
Cl 11(Workmanship)	-	12000	-
Cl 9(Press)	-	12000	-
Cl 8 & Table 3(UTM)	-	12000	-
Cl 8 & Table 3(UTM)	-	12000	-
Cl 9(Press)	-	12000	-
Cl 11(Workmanship)	-	12000	-
Cl 12 & 13(Length, Width & Thickness)	-	12000	-
7.0 (7)(Micro Alloying elements - IS:8811)	-	12000	-
8.0 (1)(Tensile Strength-IS:1608(P1))	-	12000	-
8.0 (2)(Yield Strength-IS:1608(P1))	-	12000	-
8.0 (3)(Elongation on 5.65 SoA GL-IS:1608(P1))	-	12000	-
12 (1)(Width - SOP MT-23)	-	12000	-
12 (2)(Thickness- SOP MT-23)	-	12000	-
12 (3)(Mass of Strip- SOP MT-23)	-	12000	-
15.0 & 15.1(Coil edges - IS:10748)	-	12000	-
15.0 & 15.2(Surface finish - IS:10748)	-	12000	-
15.0 & 15.5(Telescopicity - IS:10748)	-	12000	-
15(Condition of Coil)	-	12000	-
16(Marking)	-	12000	-
3.4(Vehicle Fuel System)	-	12000	-
9(Protective Treatment)	-	12000	-
Table 1 ( Clauses 7.1 ,7.2 )(Tungsten (W))	-	12000	-
Table 1 ( Clauses 7.1 ,7.2 )(Boron (B))	-	12000	-

28 Jun, 2027

-
-

9680

Adityapur Auto Cluster, Adityapur

5178506

IS 4923 (2017)

Hollow steel sections for structural use - Specification (Third Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.7.1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12000	-
Cl.7.1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12000	-
Cl.7.1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12000	-
Cl.7.1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12000	-
Cl.7.1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12000	-
Cl.7.1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12000	-
Cl.7.1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12000	-
Cl.7.1(Niobium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12000	-
Cl.7.1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12000	-
Cl.7.1(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12000	-
Cl.7.1(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12000	-
Cl.7.1(Carbon Equivalent-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Depth))	-	12000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Width))	-	12000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Thickness))	-	12000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Weigth))	-	12000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Area of Section))	-	12000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia))	-	12000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about X-X))	-	12000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about Y-Y))	-	12000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration))	-	12000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration about X-X))	-	12000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Radius of Gyration about Y-Y))	-	12000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Elastic Modulus about X-X))	-	12000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Elastic Modulus about Y-Y))	-	12000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus))	-	12000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus about X-X))	-	12000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Plastic Modulus about Y-Y))	-	12000	-
Cl. 10.1, 14.1, 18.1(Straightness)	-	12000	-
Cl. 10.2, Fig 1(Outside dimension (B))	-	12000	-
Cl. 10.2, Fig 1(Outside dimension (H))	-	12000	-
Cl. 10.2, Fig 1(Outside dimension (T))	-	12000	-
Cl. 10.4, Fig 2(Concavity, X1)	-	12000	-
Cl. 10.4, Fig 2(Convexity, X2)	-	12000	-
Cl. 10.5, Fig 3(Squareness of side)	-	12000	-
Cl. 10.6, Fig 4(External Corner Radius)	-	12000	-
Cl. 10.7, Fig 5(Total twist, V)	-	12000	-
Cl. 15.2, Table 3(Tensile Strength- IS 1608)	-	12000	-
Cl. 15.2, Table 3(Yield Strength- IS 1608)	-	12000	-
Cl. 15.2, Table 3(Elongation- IS 1608)	-	12000	-
Cl. 14.1(Exact Length)	-	12000	-
Cl. 14.1(Random Length)	-	12000	-
Cl. 14.1(Weight on individual length)	-	12000	-
Cl. 14.1(Weight on lots of 10 tonnes min)	-	12000	-
Cl. 18, Note 2(Internal Fin Height (Only for Cold Formed))	-	12000	-
7(Micro Alloying elements(Nb+V+Ti))	-	12000	-
7(Carbon equivalent as CE)	-	12000	-
10.4(Concavity/Convexity-SOP MT-23)	-	12000	-
10.5(Squareness of corner/Sides-SOP MT-23)	-	12000	-
10.6("External corner Radius/ Radii of corners-outside - SOP MT-23")	-	12000	-
11(Oiling & Painting - IS 4923)	-	12000	-
18.1(Height of the internal weld fin - IS 4923)	-	12000	-
10.3(Thickness - IS 4923)	-	12000	-
13(Marking)	-	12000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Elastic Modulus))	-	12000	-

28 Jun, 2027

-
-

9681

CIPET: CENTRE FOR SKILLING AND TECHNICAL SUPPORT (CSTS) - (CIPET), AURANGABAD

7123534

IS 17216 (2019)

Polyethylene Mulch Films for Agriculture and Horticulture • Specification

non reflective type film

245905 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(Density)	-	700	-
5.1.2(Melt Flow Index)	-	1100	-
5.1.4(Carbon black, Density)	-	700	-
5.1.4(Carbon black, Toluene extract)	-	700	-
5.1.4(Carbon black, Volatile matter)	-	700	-
5.1.5(UV Stabilizer)	-	2000	-
5.2.1(Visual Appearance)	-	500	-
5.2.2(Film Form)	-	500	-
5.2.4(Odour)	-	500	-
5.3.1.1(Tolerance on thickness)	-	500	-
5.3.1.2(Tolerance on width)	-	500	-
5.3.2(Impact Strength)	-	1100	-
5.3.2, Table 1(Nominal Film Thickness)	-	500	-
5.3.2, Table 1(Impact Failure Mass)	-	1100	-
5.3.3(Tensile Strength at Break)	-	3600	1300+500+1300+500
5.3.4(Elongation at Break)	-	0	-
5.3.5(Coefficient of Friction)	-	850	-
5.3.6(Elmendorf Tear Strength)	-	1100	-
5.3.7(Opacity)	-	575	-
5.4, Table 2(Carbon black, percent)	-	1100	-
5.4, Table 2(Ash content, percent)	-	1200	-
5.4, Table 2(Carbon black dispersion)	-	700	-
5.5(Service Life)	-	222580	FOR MAXIMUM OF 5502 HOURS OF uv EXPOSURE 100 X 65 = 6500+5402X 40=216080 =222580
5.5, Annex D(U. V. Exposure (Service Life of Indian Solar Radiant Exposure 160 Kly))	-	3600	1300+500+1300+500

31 Dec, 2026

-
Included w.e.f. 20.08.2024

9682

Alpha Test House Private Limited, Delhi

8131026

IS 11037 (2019)

Electronic Type Fan Regulators — Specification ( First Revision )

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.1 (a)(Marking )	-	83	-
9.1 (b)(Marking )	-	83	-
9.1 (c)(Marking )	-	83	-
9.1 (d)(Marking )	-	83	-
9.1 (e)(Marking )	-	83	-
9.1 (f)(Marking )	-	83	-
9.2(Marking )	-	500	-
6.1(Design and General Construction)	-	200	-
6.2(Design and General Construction)	-	200	-
6.3(Design and General Construction)	-	200	-
6.5(Design and General Construction)	-	200	-
6.6(Design and General Construction)	-	200	-
9.5.1 , 7.3(Temperature Rise)	-	1500	-
9.5.1 , 7.3 (a)(Temperature Rise )	-	750	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	750	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	750	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	750	-
9.5.2, 7.2(Leakage Current Test(as per Cl.13.2 of IS 302 (Part 1).)	-	1000	-
9.5.3(High Voltage Test)	-	1500	-
9.5.5(Earthing Connection)	-	1000	-
9.5.6(Protection against electric shock (as per Cl.8 of IS 302 (Part 1))	-	1000	-
7.6(General and safety requirements)	-	1000	-
7.7(Voltage drop)	-	1000	-
8.1(Performance)	-	300	-
8.2(Performance)	-	300	-
8.3(Performance)	-	300	-
9.5.7, 9.5.4(Moisture Resistance )	-	2500	-
7.4.1(a)(Mechanical strength )	-	500	-
7.4.1(b)(Mechanical strength )	-	500	-
9.5.8, (Mechanical strength (as per Cl.21.1 of IS 302-1:2008))	-	1500	-
9.5.9, 7.5, Table-1(Creepage Distances and Clearances (as per Cl. 29 of IS 302-1))	-	1000	-
9.5.9, 7.5, Table-1(Creepage Distances and Clearances (as per Cl. 29 of IS 302-1))	-	1000	-
9.5.10( Electrical Endurance Test)	-	3000	-
9.5.11.2(Environmental Tests)	-	5000	-
9.5.11.3(Environmental Tests)	-	3000	-
9.5.11.4(Environmental Tests)	-	4000	-
9.5.12(Resistance to Abnormal Heat and to Fire)	-	750	-
9.5.12.1(Resistance to Abnormal Heat and to Fire)	-	750	-
9.5.13(Resistance to Rusting )	-	1500	-
9.5.14(Checking of Dimensions)	-	1500	-
9.1(Marking )	-	500	-
9.1 (a)(Marking )	-	83	-
9.1 (b)(Marking )	-	83	-
9.1 (c)(Marking )	-	83	-
9.1 (d)(Marking )	-	83	-
9.1 (e)(Marking )	-	83	-
9.1 (f)(Marking )	-	83	-
9.2(Marking )	-	83	-
6.1(Design and General Construction)	-	200	-
6.2(Design and General Construction)	-	200	-
6.3(Design and General Construction)	-	200	-
6.5(Design and General Construction)	-	200	-
6.6(Design and General Construction)	-	200	-
9.5.1 , 7.3(Temperature Rise)	-	1500	-
9.5.1 , 7.3 (a)(Temperature Rise )	-	750	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	750	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	750	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	750	-
9.5.2, 7.2(Leakage Current Test(as per Cl.13.2 of IS 302 (Part 1).)	-	1000	-
9.5.3(High Voltage Test)	-	1000	-
9.5.5(Earthing Connection)	-	1000	-
9.5.6(Protection against electric shock (as per Cl.8 of IS 302 (Part 1))	-	1000	-
7.6(General and safety requirements)	-	1000	-
7.7(Voltage drop)	-	0	-
8.1(Performance)	-	300	-
8.2(Performance)	-	300	-
8.3(Performance)	-	300	-
9.5.7, 9.5.4(Moisture Resistance )	-	2500	-
7.4.1(Mechanical strength )	-	1000	-
7.4.1(a)(Mechanical strength )	-	500	-
7.4.1(b)(Mechanical strength )	-	500	-
9.5.8, (Mechanical strength (as per Cl.21.1 of IS 302-1:2008))	-	1500	-
9.5.9, 7.5, Table-1(Creepage Distances and Clearances (as per Cl. 29 of IS 302-1))	-	1000	-
9.5.9, 7.5, Table-1(Creepage Distances and Clearances (as per Cl. 29 of IS 302-1))	-	1000	-
9.5.10( Electrical Endurance Test)	-	3000	-
9.5.11.2(Environmental Tests)	-	3000	-
9.5.11.3(Environmental Tests)	-	3000	-
9.5.11.4(Environmental Tests)	-	4000	-
9.5.12(Resistance to Abnormal Heat and to Fire)	-	750	-
9.5.12.1(Resistance to Abnormal Heat and to Fire)	-	750	-
9.5.13(Resistance to Rusting )	-	1500	-
9.5.14(Checking of Dimensions)	-	1500	-

-
-

9683

WELL TECH TEST AND RESEARCH CENTER, DERABASSI

9177306

IS 14587 (2023)

Prelaminated Medium Density Fibre Board - Specification

GRADE 1 & 2/ TYPE 1,2,3,4/ FORMALDEHYDE CLASS E1&E2

16500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Medium Density Fibre (MDF) Board)	-	1000	-
Cl-7(Finish)	-	1000	-
Cl-8.1(Dimensions of prelaminated MDF)	-	2000	-
Cl-8.2(Tolerances)	-	2000	-
Cl-8.2.1(Edge straightness)	-	2000	-
Cl-9.1 S.No-(1), i(Density, kg/m3)	-	2000	-
Cl-9.1 S.No-(1), ii(Variation from mean density, percent)	-	2000	-
Cl-9.1 S.No-(1), iii(Moisture content, percent)	-	2000	-
Cl-9.1 S.No-(1), iv(Variation from mean moisture content, percent (absolute))	-	2000	-
Cl-9.1 S.No-(1), v(Linear expansion (thickness swelling in water), due to general absorption after 24 h soaking, percent, Max)	-	2000	-
Cl-9.1 S.No-(1), vi(Internal bond strength, N/mm2, Min)	-	2000	-
Cl-9.1 S.No-(1), vii,a(After cyclic test)	-	2000	-
Cl-9.1 S.No-(1), vii,b(After accelerated water resistance test)	-	2000	-
Cl-9.1 S.No-(1), viii(Modulus of rupture, N/mm2 , Min)	-	2000	-
Cl-9.1 S.No-(1), ix(Modulus of elasticity, N/mm2 , Min)	-	2000	-
Cl-9.1 S.No-(1), x,(Screw withdrawal strength, ????????, Min)	-	2000	-
Cl-9.1 S.No-(1), xi(Formaldehyde content (Fc), mg/100 g for oven dry board)	-	2000	-
Cl-9.1 S.No-(1), xii(Steady-state formaldehyde emission (Fc), mg/m3)	-	2000	-
Cl-9.1 S.No-(1), xiii(Abrasion resistance in number of revolutions, Min, (Type 1 to 4))	-	2000	-
Cl-9.1 S.No-(1), xiv(Resistance to steam/water vapours)	-	2000	-
Cl-9.1 S.No-(1), xv(Resistance to crack)	-	2000	-
Cl-9.1 S.No-(1), xvi(Resistance to a cigarette burn)	-	2000	-
Cl-9.1 S.No-(1), xvii(Resistance to stain)	-	2000	-
Cl-11.2(Specific Requirement)	-	2000	-
Cl-12(Marking)	-	2000	-
Cl-5.1(Medium Density Fibre (MDF) Board)	-	2000	-
Cl-7(Finish)	-	2000	-
Cl-8.1(Dimensions of prelaminated MDF)	-	2000	-
Cl-8.2(Tolerances)	-	2000	-
Cl-8.2.1(Edge straightness)	-	2000	-
Cl-9.1 S.No-(1), i(Density, kg/m3)	-	2000	-
Cl-9.1 S.No-(1), ii(Variation from mean density, percent)	-	2000	-
Cl-9.1 S.No-(1), iii(Moisture content, percent)	-	2000	-
Cl-9.1 S.No-(1), iv(Variation from mean moisture content, percent (absolute))	-	2000	-
Cl-9.1 S.No-(1), v(Linear expansion (thickness swelling in water), due to general absorption after 24 h soaking, percent, Max)	-	2000	-
Cl-9.1 S.No-(1), vi(Internal bond strength, N/mm2, Min)	-	2000	-
Cl-9.1 S.No-(1), vii,a(After cyclic test)	-	2000	-
Cl-9.1 S.No-(1), vii,b(After accelerated water resistance test)	-	2000	-
Cl-9.1 S.No-(1), viii(Modulus of rupture, N/mm2 , Min)	-	2000	-
Cl-9.1 S.No-(1), ix(Modulus of elasticity, N/mm2 , Min)	-	2000	-
Cl-9.1 S.No-(1), x,(Screw withdrawal strength, ????????, Min)	-	2000	-
Cl-9.1 S.No-(1), xi(Formaldehyde content (Fc), mg/100 g for oven dry board)	-	2000	-
Cl-9.1 S.No-(1), xii(Steady-state formaldehyde emission (Fc), mg/m3)	-	2000	-
Cl-9.1 S.No-(1), xiii(Abrasion resistance in number of revolutions, Min, (Type 1 to 4))	-	2000	-
Cl-9.1 S.No-(1), xiv(Resistance to steam/water vapours)	-	2000	-
Cl-9.1 S.No-(1), xv(Resistance to crack)	-	2000	-
Cl-9.1 S.No-(1), xvi(Resistance to a cigarette burn)	-	2000	-
Cl-9.1 S.No-(1), xvii(Resistance to stain)	-	2000	-
Cl-11.2(Specific Requirement)	-	2000	-
Cl-12(Marking)	-	2000	-
Cl-5.1(Medium Density Fibre (MDF) Board)	-	16500	-
Cl-7(Finish)	-	16500	-
Cl-8.1(Dimensions of prelaminated MDF)	-	16500	-
Cl-8.2(Tolerances)	-	16500	-
Cl-8.2.1(Edge straightness)	-	16500	-
Cl-9.1 S.No-(1), i(Density, kg/m3)	-	16500	-
Cl-9.1 S.No-(1), ii(Variation from mean density, percent)	-	16500	-
Cl-9.1 S.No-(1), iii(Moisture content, percent)	-	16500	-
Cl-9.1 S.No-(1), iv(Variation from mean moisture content, percent (absolute))	-	16500	-
Cl-9.1 S.No-(1), v(Linear expansion (thickness swelling in water), due to general absorption after 24 h soaking, percent, Max)	-	16500	-
Cl-9.1 S.No-(1), vi(Internal bond strength, N/mm2, Min)	-	16500	-
Cl-9.1 S.No-(1), vii,a(After cyclic test)	-	16500	-
Cl-9.1 S.No-(1), vii,b(After accelerated water resistance test)	-	16500	-
Cl-9.1 S.No-(1), viii(Modulus of rupture, N/mm2 , Min)	-	16500	-
Cl-9.1 S.No-(1), ix(Modulus of elasticity, N/mm2 , Min)	-	16500	-
Cl-9.1 S.No-(1), x,(Screw withdrawal strength, ????????, Min)	-	16500	-
Cl-9.1 S.No-(1), xi(Formaldehyde content (Fc), mg/100 g for oven dry board)	-	16500	-
Cl-9.1 S.No-(1), xii(Steady-state formaldehyde emission (Fc), mg/m3)	-	16500	-
Cl-9.1 S.No-(1), xiii(Abrasion resistance in number of revolutions, Min, (Type 1 to 4))	-	16500	-
Cl-9.1 S.No-(1), xiv(Resistance to steam/water vapours)	-	16500	-
Cl-9.1 S.No-(1), xv(Resistance to crack)	-	16500	-
Cl-9.1 S.No-(1), xvi(Resistance to a cigarette burn)	-	16500	-
Cl-9.1 S.No-(1), xvii(Resistance to stain)	-	16500	-
Cl-11.2(Specific Requirement)	-	16500	-
Cl-12(Marking)	-	16500	-
Cl-5.1(Medium Density Fibre (MDF) Board)	-	16500	-
Cl-7(Finish)	-	16500	-
Cl-8.1(Dimensions of prelaminated MDF)	-	16500	-
Cl-8.2(Tolerances)	-	16500	-
Cl-8.2.1(Edge straightness)	-	16500	-
Cl-9.1 S.No-(1), i(Density, kg/m3)	-	16500	-
Cl-9.1 S.No-(1), ii(Variation from mean density, percent)	-	16500	-
Cl-9.1 S.No-(1), iii(Moisture content, percent)	-	16500	-
Cl-9.1 S.No-(1), iv(Variation from mean moisture content, percent (absolute))	-	16500	-
Cl-9.1 S.No-(1), v(Linear expansion (thickness swelling in water), due to general absorption after 24 h soaking, percent, Max)	-	16500	-
Cl-9.1 S.No-(1), vi(Internal bond strength, N/mm2, Min)	-	16500	-
Cl-9.1 S.No-(1), vii,a(After cyclic test)	-	16500	-
Cl-9.1 S.No-(1), vii,b(After accelerated water resistance test)	-	16500	-
Cl-9.1 S.No-(1), viii(Modulus of rupture, N/mm2 , Min)	-	16500	-
Cl-9.1 S.No-(1), ix(Modulus of elasticity, N/mm2 , Min)	-	16500	-
Cl-9.1 S.No-(1), x,(Screw withdrawal strength, ????????, Min)	-	16500	-
Cl-9.1 S.No-(1), xi(Formaldehyde content (Fc), mg/100 g for oven dry board)	-	16500	-
Cl-9.1 S.No-(1), xii(Steady-state formaldehyde emission (Fc), mg/m3)	-	16500	-
Cl-9.1 S.No-(1), xiii(Abrasion resistance in number of revolutions, Min, (Type 1 to 4))	-	16500	-
Cl-9.1 S.No-(1), xiv(Resistance to steam/water vapours)	-	16500	-
Cl-9.1 S.No-(1), xv(Resistance to crack)	-	16500	-
Cl-9.1 S.No-(1), xvi(Resistance to a cigarette burn)	-	16500	-
Cl-9.1 S.No-(1), xvii(Resistance to stain)	-	16500	-
Cl-11.2(Specific Requirement)	-	16500	-
Cl-12(Marking)	-	16500	-
Cl-5.1(Medium Density Fibre (MDF) Board)	-	2000	-
Cl-7(Finish)	-	2000	-
Cl-8.1(Dimensions of prelaminated MDF)	-	2000	-
Cl-8.2(Tolerances)	-	2000	-
Cl-8.2.1(Edge straightness)	-	2000	-
Cl-9.1 S.No-(1), i(Density, kg/m3)	-	2000	-
Cl-9.1 S.No-(1), ii(Variation from mean density, percent)	-	2000	-
Cl-9.1 S.No-(1), iii(Moisture content, percent)	-	2000	-
Cl-9.1 S.No-(1), iv(Variation from mean moisture content, percent (absolute))	-	2000	-
Cl-9.1 S.No-(1), v(Linear expansion (thickness swelling in water), due to general absorption after 24 h soaking, percent, Max)	-	2000	-
Cl-9.1 S.No-(1), vi(Internal bond strength, N/mm2, Min)	-	2000	-
Cl-9.1 S.No-(1), vii,a(After cyclic test)	-	2000	-
Cl-9.1 S.No-(1), vii,b(After accelerated water resistance test)	-	2000	-
Cl-9.1 S.No-(1), viii(Modulus of rupture, N/mm2 , Min)	-	2000	-
Cl-9.1 S.No-(1), ix(Modulus of elasticity, N/mm2 , Min)	-	2000	-
Cl-9.1 S.No-(1), x,(Screw withdrawal strength, ????????, Min)	-	2000	-
Cl-9.1 S.No-(1), xi(Formaldehyde content (Fc), mg/100 g for oven dry board)	-	2000	-
Cl-9.1 S.No-(1), xii(Steady-state formaldehyde emission (Fc), mg/m3)	-	2000	-
Cl-9.1 S.No-(1), xiii(Abrasion resistance in number of revolutions, Min, (Type 1 to 4))	-	2000	-
Cl-9.1 S.No-(1), xiv(Resistance to steam/water vapours)	-	2000	-
Cl-9.1 S.No-(1), xv(Resistance to crack)	-	2000	-
Cl-9.1 S.No-(1), xvi(Resistance to a cigarette burn)	-	2000	-
Cl-9.1 S.No-(1), xvii(Resistance to stain)	-	2000	-
Cl-11.2(Specific Requirement)	-	2000	-
Cl-12(Marking)	-	2000	-
Cl-5.1(Medium Density Fibre (MDF) Board)	-	1	CLAUSE REPEATED
Cl-7(Finish)	-	1	CLAUSE REPEATED
Cl-8.1(Dimensions of prelaminated MDF)	-	1	CLAUSE REPEATED
Cl-8.2(Tolerances)	-	1	CLAUSE REPEATED
Cl-8.2.1(Edge straightness)	-	1	CLAUSE REPEATED
Cl-9.1 S.No-(1), i(Density, kg/m3)	-	1	CLAUSE REPEATED
Cl-9.1 S.No-(1), ii(Variation from mean density, percent)	-	1	CLAUSE REPEATED
Cl-9.1 S.No-(1), iii(Moisture content, percent)	-	1	CLAUSE REPEATED
Cl-9.1 S.No-(1), iv(Variation from mean moisture content, percent (absolute))	-	1	CLAUSE REPEATED
Cl-9.1 S.No-(1), v(Linear expansion (thickness swelling in water), due to general absorption after 24 h soaking, percent, Max)	-	1	CLAUSE REPEATED
Cl-9.1 S.No-(1), vi(Internal bond strength, N/mm2, Min)	-	1	CLAUSE REPEATED
Cl-9.1 S.No-(1), vii,a(After cyclic test)	-	1	CLAUSE REPEATED
Cl-9.1 S.No-(1), vii,b(After accelerated water resistance test)	-	1	CLAUSE REPEATED
Cl-9.1 S.No-(1), viii(Modulus of rupture, N/mm2 , Min)	-	1	CLAUSE REPEATED
Cl-9.1 S.No-(1), ix(Modulus of elasticity, N/mm2 , Min)	-	1	CLAUSE REPEATED
Cl-9.1 S.No-(1), x,(Screw withdrawal strength, ????????, Min)	-	1	CLAUSE REPEATED
Cl-9.1 S.No-(1), xi(Formaldehyde content (Fc), mg/100 g for oven dry board)	-	1	CLAUSE REPEATED
Cl-9.1 S.No-(1), xii(Steady-state formaldehyde emission (Fc), mg/m3)	-	1	CLAUSE REPEATED
Cl-9.1 S.No-(1), xiii(Abrasion resistance in number of revolutions, Min, (Type 1 to 4))	-	1	CLAUSE REPEATED
Cl-9.1 S.No-(1), xiv(Resistance to steam/water vapours)	-	1	CLAUSE REPEATED
Cl-9.1 S.No-(1), xv(Resistance to crack)	-	1	CLAUSE REPEATED
Cl-9.1 S.No-(1), xvi(Resistance to a cigarette burn)	-	1	CLAUSE REPEATED
Cl-9.1 S.No-(1), xvii(Resistance to stain)	-	1	CLAUSE REPEATED
Cl-11.2(Specific Requirement)	-	1	CLAUSE REPEATED
Cl-12(Marking)	-	1	CLAUSE REPEATED

30 Mar, 2027

-
Included w.e.f. 16.05.2024 Excluding requirement for Ecomark optional requirement, Cl.8.2.1 (Edge straightness length upto 2500 mm, Cl.9.1, xii (Steady State formaldehyde emission (optional)

9684

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 14810 (2000)

Copper tubes for plumbing - Specification

Copper tubes

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4("General Requirements")	-	100	-
Clause 5(Supply of material)	-	100	-
Clause 6("Freedom from defects")	-	100	-
Clause 7(Chemical composition)	-	6000	-
Clause 10("DIMENSIONS AND TOLERANCES")	-	500	-
Clause 11.1(Tensile Test)	-	3000	-
Clause 11.2(Drift Expanding Test)	-	1500	-
Clause 12(HYDROSTATIC TEST)	-	3000	-
Clause 13(Sampling and criteria for conformity)	-	500	-
Clause 14(Marking)	-	100	-
1()	-	100	-

31 Dec, 2026

-
Included w.e.f. 12.04.2024

9685

Atharva Laboratories Pvt. Ltd. (D115A), Noida (8134206)

8134206

IS 17861 (2022)

TEXTILE BOOTS WITH POLYMERIC SOLE JUNGLE BOOTS - SPECIFICATION Third Revision

45450 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause-5.1(Design)	-	150	Ok
Clause-5.2(Size and Fitting)	-	150	Ok
Clause-5.3(Height of Upper)	-	100	Ok
Clause-5.4(Weight)	-	100	Ok
Clause-5.5.1(Construction)	-	150	Ok
Clause-5.5.2(Upper – Outsole Bond Strength)	-	600	Ok
Clause-5.5.3(Consolidation Test (For Type 1 and Type 2))	-	800	Ok
Clause-5.5.4(Ergonomic Features)	-	800	Ok
Clause-5.5.5(Slip Resistance)	-	1000	Ok
Clause-5.5.6(Energy Absorption of Seat Region)	-	600	Ok
Clause-5.5.7(Water Resistance)	-	800	Ok
Clause-5.6.1(Penetration Resistance)	-	800	Ok
Clause-5.6.2(Electrical Resistance (Antistatic))	-	800	Ok
Clause-5.6.3(Heat Insulation of Sole Complex)	-	800	Ok
Clause-5.6.4(Cold Insulation of Sole Complex)	-	800	Ok
Clause-5.7.1(Material)	-	150	Ok
Clause-5.7.2(Tear Strength)	-	450	Ok
Clause-5.7.3(Water Vapour Permeability and Coefficient)	-	800	Ok
Clause-5.7.4(Colour Fastness: Light)	-	600	Ok
Clause-5.7.4(Colour Fastness:Washing)	-	600	Ok
Clause-5.8.2(Tear Strength)	-	450	Ok
Clause-5.8.3(Abrasion Resistance)	-	800	Ok
Clause-5.8.4(Water Vapour Permeability and Coefficient)	-	800	Ok
Clause-5.9.1(Tear Strength)	-	600	Ok
Clause-5.10.1(Binding Tape)	-	800	Ok
Clause-5.11.1(Closing Thread)	-	800	Ok
Clause-5.12.1(Material and Thickness)	-	150	Ok
Clause-5.12.2(Abrasion Resistance)	-	600	Ok
Clause-5.12.3(Water Absorption and Desorption)	-	800	Ok
Clause-5.13.1(Material and Thickness)	-	150	Ok
Clause-5.13.2(Abrasion Resistance)	-	800	Ok
Clause-5.13.3(Bond Strength of Textile Layer and Insock)	-	500	Ok
Clause-5.15(Toe Puff and Counter Stiffener)	-	450	Ok
Clause-5.16.1(Material)	-	150	Ok
Clause-5.16.2(Thickness)	-	150	Ok
Clause-5.16.3(Sole Density)	-	150	Ok
Clause-5.16.4(Hardness)	-	200	Ok
Clause-5.16.5(Ageing)	-	600	Ok
Clause-5.16.6(Tear Strength)	-	600	Ok
Clause-5.16.7(Abrasion Resistance)	-	800	Ok
Clause-5.16.8(Flexing Resistance)	-	800	Ok
Clause-5.16.9(Hydrolysis)	-	1000	Ok
Clause-5.16.10(Interlayer Bond Strength)	-	800	Ok
Clause-5.17(Eyelets)	-	250	Ok
Clause-5.18.1(Material)	-	150	Ok
Clause-5.18.2(Colour Fastness (Light, Washing))	-	800	Ok
Clause-5.18.3(Breaking Load and Tag Retention)	-	600	Ok
Clause-5.18.4.1(Lace to lace)	-	600	Ok
Clause-5.18.4.2(Lace to eyelet)	-	600	Ok
Clause-6, Table no. 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	21500	Ok
Clause-7(Marking)	-	150	Ok
Clause-5.1(Design)	-	0	-
Clause-5.2(Size and Fitting)	-	0	-
Clause-5.3(Height of Upper)	-	0	-
Clause-5.4(Weight)	-	0	-
Clause-5.5.1(Construction)	-	0	-
Clause-5.5.2(Upper – Outsole Bond Strength)	-	0	-
Clause-5.5.3(Consolidation Test (For Type 1 and Type 2))	-	0	-
Clause-5.5.4(Ergonomic Features)	-	0	-
Clause-5.5.5(Slip Resistance)	-	0	-
Clause-5.5.6(Energy Absorption of Seat Region)	-	0	-
Clause-5.5.7(Water Resistance)	-	0	-
Clause-5.6.1(Penetration Resistance)	-	0	-
Clause-5.6.2(Electrical Resistance (Antistatic))	-	0	-
Clause-5.6.3(Heat Insulation of Sole Complex)	-	0	-
Clause-5.6.4(Cold Insulation of Sole Complex)	-	0	-
Clause-5.7.1(Material)	-	0	-
Clause-5.7.2(Tear Strength)	-	0	-
Clause-5.7.3(Water Vapour Permeability and Coefficient)	-	0	-
Clause-5.7.4(Colour Fastness: Light)	-	0	-
Clause-5.7.4(Colour Fastness:Washing)	-	0	-
Clause-5.8.2(Tear Strength)	-	0	-
Clause-5.8.3(Abrasion Resistance)	-	0	-
Clause-5.8.4(Water Vapour Permeability and Coefficient)	-	0	-
Clause-5.9.1(Tear Strength)	-	0	-
Clause-5.10.1(Binding Tape)	-	0	-
Clause-5.11.1(Closing Thread)	-	0	-
Clause-5.12.1(Material and Thickness)	-	0	-
Clause-5.12.2(Abrasion Resistance)	-	0	-
Clause-5.12.3(Water Absorption and Desorption)	-	0	-
Clause-5.13.1(Material and Thickness)	-	0	-
Clause-5.13.2(Abrasion Resistance)	-	0	-
Clause-5.13.3(Bond Strength of Textile Layer and Insock)	-	0	-
Clause-5.15(Toe Puff and Counter Stiffener)	-	0	-
Clause-5.16.1(Material)	-	0	-
Clause-5.16.2(Thickness)	-	0	-
Clause-5.16.3(Sole Density)	-	0	-
Clause-5.16.4(Hardness)	-	0	-
Clause-5.16.5(Ageing)	-	0	-
Clause-5.16.6(Tear Strength)	-	0	-
Clause-5.16.7(Abrasion Resistance)	-	0	-
Clause-5.16.8(Flexing Resistance)	-	0	-
Clause-5.16.9(Hydrolysis)	-	0	-
Clause-5.16.10(Interlayer Bond Strength)	-	0	-
Clause-5.17(Eyelets)	-	0	-
Clause-5.18.1(Material)	-	0	-
Clause-5.18.2(Colour Fastness (Light, Washing))	-	0	-
Clause-5.18.3(Breaking Load and Tag Retention)	-	0	-
Clause-5.18.4.1(Lace to lace)	-	0	-
Clause-5.18.4.2(Lace to eyelet)	-	0	-
Clause-6, Table no. 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	0	-
Clause-7(Marking)	-	0	-
Clause-5.1(Design)	-	-	-
Clause-5.2(Size and Fitting)	-	-	-
Clause-5.3(Height of Upper)	-	-	-
Clause-5.4(Weight)	-	-	-
Clause-5.5.1(Construction)	-	-	-
Clause-5.5.2(Upper – Outsole Bond Strength)	-	-	-
Clause-5.5.3(Consolidation Test (For Type 1 and Type 2))	-	-	-
Clause-5.5.4(Ergonomic Features)	-	-	-
Clause-5.5.5(Slip Resistance)	-	-	-
Clause-5.5.6(Energy Absorption of Seat Region)	-	-	-
Clause-5.5.7(Water Resistance)	-	-	-
Clause-5.6.1(Penetration Resistance)	-	-	-
Clause-5.6.2(Electrical Resistance (Antistatic))	-	-	-
Clause-5.6.3(Heat Insulation of Sole Complex)	-	-	-
Clause-5.6.4(Cold Insulation of Sole Complex)	-	-	-
Clause-5.7.1(Material)	-	-	-
Clause-5.7.2(Tear Strength)	-	-	-
Clause-5.7.3(Water Vapour Permeability and Coefficient)	-	-	-
Clause-5.7.4(Colour Fastness: Light)	-	-	-
Clause-5.7.4(Colour Fastness:Washing)	-	-	-
Clause-5.8.2(Tear Strength)	-	-	-
Clause-5.8.3(Abrasion Resistance)	-	-	-
Clause-5.8.4(Water Vapour Permeability and Coefficient)	-	-	-
Clause-5.9.1(Tear Strength)	-	-	-
Clause-5.10.1(Binding Tape)	-	-	-
Clause-5.11.1(Closing Thread)	-	-	-
Clause-5.12.1(Material and Thickness)	-	-	-
Clause-5.12.2(Abrasion Resistance)	-	-	-
Clause-5.12.3(Water Absorption and Desorption)	-	-	-
Clause-5.13.1(Material and Thickness)	-	-	-
Clause-5.13.2(Abrasion Resistance)	-	-	-
Clause-5.13.3(Bond Strength of Textile Layer and Insock)	-	-	-
Clause-5.15(Toe Puff and Counter Stiffener)	-	-	-
Clause-5.16.1(Material)	-	-	-
Clause-5.16.2(Thickness)	-	-	-
Clause-5.16.3(Sole Density)	-	-	-
Clause-5.16.4(Hardness)	-	-	-
Clause-5.16.5(Ageing)	-	-	-
Clause-5.16.6(Tear Strength)	-	-	-
Clause-5.16.7(Abrasion Resistance)	-	-	-
Clause-5.16.8(Flexing Resistance)	-	-	-
Clause-5.16.9(Hydrolysis)	-	-	-
Clause-5.16.10(Interlayer Bond Strength)	-	-	-
Clause-5.17(Eyelets)	-	-	-
Clause-5.18.1(Material)	-	-	-
Clause-5.18.2(Colour Fastness (Light, Washing))	-	-	-
Clause-5.18.3(Breaking Load and Tag Retention)	-	-	-
Clause-5.18.4.1(Lace to lace)	-	-	-
Clause-5.18.4.2(Lace to eyelet)	-	-	-
Clause-6, Table no. 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	-	-
Clause-7(Marking)	-	-	-
Cl 5.9(Outer Toe Cap (minimum thickness))	-	-	-
Cl-5.10.2(Colour fastness to light)	-	-	-
Cl-5.10.2(Colour fastness to washing)	-	-	-
Cl-5.11.2(Colour fastness to washing)	-	-	-
Cl-5.11.2(Colour fastness to light)	-	-	-
Cl-5.11.2(Colour fastness to perspiration)	-	-	-
Cl- 6, Table No 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	-	-
Cl-6, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	-	-
Cl-6, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	-	-
Cl-6, Table no-1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	-	-
Cl-6, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	-	-
Cl-6, Table no-1 of IS 17011 (vii)(Formaldehyde)	-	-	-
Cl-6, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	-	-
Cl-6, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	-	-
Cl-6, Table no 1 of IS 17011 (x)(pH)	-	-	-
Cl-6, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	-	-
Cl-6, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	-	-
Cl-5.7.5 (Amendment No-1)(Water Repellency)	-	-	-
Cl-5.7.5 (Amendment No-1)(Water Resistance)	-	-	-
Cl-5.9.2 (Amendment No-1)(Abrasion Resistance Test)	-	-	-

21 Jul, 2028

-
Included w.e.f 27.02.2025

9686

DELHI TEST HOUSE (50) KUNDLI SONIPAT

9127026

IS 302 : Part 2 : Sec 7 (2024)

Safety of Household And Similar Electrical Appliances Part 2 Particular Requirements Section 7: Domestic Electric Clothes Washing Machines

48000.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(GENERAL REQUIREMENT)	-	250.00	-
6(CLASSIFICATION)	-	250.00	-
7(MARKING AND INSTRUCTIONS)	-	500.00	-
8(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	1000.00	-
10(POWER INPUT AND CURRENT)	-	1500.00	-
11(HEATING)	-	3000.00	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	2500.00	-
14(TRANSIENT OVERVOLTAGES)	-	1500.00	-
15(MOISTURE RESISTANCE)	-	5000.00	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	1500.00	-
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	1000.00	-
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	500.00	-
18(ENDURANCE)	-	5000.00	-
19(ABNORMAL OPERATION)	-	500.00	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
20(STABILITY AND MECHANICAL HAZARDS)	-	1500.00	-
21(MECHANICAL STRENGTH)	-	1000.00	-
22(CONSTRUCTION)	-	2000.00	-
23(INTERNAL WIRING)	-	1500.00	-
24(COMPONENTS)	-	2500.00	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	2000.00	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	2000.00	-
27(PROVISION FOR EARTHING)	-	2500.00	-
28(SCREWS AND CONNECTIONS)	-	1500.00	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	1000.00	-
30(RESISTANCE TO HEAT AND FIRE)	-	1500.00	-
31(RESISTANCE TO RUSTING)	-	3500.00	-
4(GENERAL REQUIREMENT)	-	250.00	-
6(CLASSIFICATION)	-	250.00	-
7(MARKING AND INSTRUCTIONS)	-	500.00	-
8(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	1000.00	-
10(POWER INPUT AND CURRENT)	-	1500.00	-
11(HEATING)	-	3000.00	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	2500.00	-
14(TRANSIENT OVERVOLTAGES)	-	1500.00	-
15(MOISTURE RESISTANCE)	-	5000.00	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	1500.00	-
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	1000.00	-
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	500.00	-
18(ENDURANCE)	-	5000.00	-
19(ABNORMAL OPERATION)	-	500.00	-
20(STABILITY AND MECHANICAL HAZARDS)	-	1500.00	-
21(MECHANICAL STRENGTH)	-	1000.00	-
22(CONSTRUCTION)	-	2000.00	-
23(INTERNAL WIRING)	-	1500.00	-
24(COMPONENTS)	-	2500.00	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	2000.00	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	2000.00	-
27(PROVISION FOR EARTHING)	-	2500.00	-
28(SCREWS AND CONNECTIONS)	-	1500.00	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	1000.00	-
30(RESISTANCE TO HEAT AND FIRE)	-	1500.00	-
31(RESISTANCE TO RUSTING)	-	3500.00	-
19.13(ABNORMAL OPERATION)	-	500.00	-
19.101(Abnormal Operation)	-	500.00	-
19.102(Abnormal Operation)	-	500.00	-

23 Jun, 2028

-
Included w.e.f 03.05.2024 Exclusion: Cl. 19.11.4.1 (Electrostatic discharges), Cl. 19.11.4.2 (Radiated fields), Cl. 19.11.4.3 (Fast transient bursts), Cl. 19.11.4.4 (Surge immunity test), Cl. 19.11.4.5 (Immunity to conducted discharges), Cl. 19.11.4.6 (Class 3 Voltage dips and interruptions), Cl. 19.11.4.7 (Harmonics)

9687

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 613 (2000)

Copper rods and bars for electrical purposes - Specification (Third Revision)

Copper rods and bars

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause no.3(SUPPLY OF MATERIAL)	-	100	-
Clause no.6(FREEDOM FROM DEFECTS)	-	100	-
Clause no.7(CONDITION OF SUPPLY)	-	100	-
Clause no.8(CHEMICAL COMPOSITION)	-	4100	-
Clause no.9.1, table no,1(" tensile test ")	-	2000	-
Clause no.9.2(Bend test)	-	500	-
"Clause no.10.1 and 11.1.1 Table No. 2"(Dimensions and Tolerances)	-	300	-
"Clause no.10.2 and Table No. 3"("Tolerances on Length of Bar Rod in Straight Length ")	-	300	-
"Clause no.10.4 and Table No. 4"(Corner Radius and Tolerances)	-	300	-
"Clause no.11 and Table No. 5"(Electrical Resistivity)	-	2000	-
Clause no. 13(packing)	-	100	-
Clause no. 14(Marking)	-	100	-

31 Dec, 2026

-
Included w.e.f. 12.04.2024

9688

HT Product Services Private Limited, Noida

8175006

IS 10322 : Part 5 : Sec 8 (2013)

Luminaires: Part 5 particular requirements: Sec 8 emergency lighting

up to 1000 V

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	2000	-
5(Classification of Luminaires')	-	2000	-
6.0(Marking)	-	2000	-
7.0(Construction)	-	2000	-
8.0(Creepage Distance and Clearances)	-	2000	-
9.0(Provision for earthing)	-	2000	-
10.0(Terminals)	-	2000	-
11.0(External & Internal Wiring)	-	2000	-
12.0(Protection against electric shock)	-	2000	-
13.0(Endurance Tests and Thermal Tests)	-	2000	-
14.0(Resistance to Dust & Moisture)	-	2000	-
15.0(Insulation Resistance and Electric Strength)	-	2000	-
16.0(Resistance to Heat , fire and tracking)	-	2000	-
17.0(Functional Safety)	-	2000	-
18.0(Changeover Operation)	-	2000	-
19.0(High Temperature Operation)	-	1000	-
20.0(BATTERY CHARGERS FOR SELFCONTAINED EMERGENCY LUMINAIRES)	-	1000	-
21.0(TEST DEVICES FOR EMERGENCY OPERATION)	-	1000	-
22.0(REST MODE AND INIHIBITION MODE FACILITIES)	-	1000	-

03 Dec, 2026

-
Included w.e.f 07.05.2024

9689

AES Laboratories Pvt. Ltd., Noida

8117716

IS 14542 (1998)

Partly skimmed milk powder specification

2850 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table 1(i)(Moisture Type I (IS 11623))	-	300	NA
Table 1(i)(Moisture Type II (IS 11623))	-	300	NA
Table 1(ii)(Total solids (milk solids and added salts) Type I (IS 11623))	-	400	NA
Table 1(ii)(Total solids (milk solids and added salts) Type II (IS 11623))	-	400	NA
Table 1(iii)(Milk fat, Type I (IS I1722))	-	350	NA
Table 1(iii)(Milk fat, Type II (IS I1722))	-	350	NA
Table 1(iv)(Insolubility index, a) Roller dried Type I (IS 12759))	-	350	NA
Table 1(iv)(Insolubility index, a) Roller dried Type II (IS 12759))	-	350	NA
Table 1(iv)(Insolubility index, b) Spray dried Type I (IS 12759))	-	350	NA
Table 1(iv)(Insolubility index, b) Spray dried Type II (IS 12759))	-	340	NA
Table 1(v)(Total ash Type I (Annex B of IS 14433 - Part 1))	-	300	NA
Table 1(v)(Total ash Type II (Annex B of IS 14433 - Part 1))	-	300	NA
Table 1(vi)(Titratable acidity (as lactic acid) Type I (IS 11766))	-	300	NA
Table 1(vi)(Titratable acidity (as lactic acid) Type II (IS 11766))	-	300	NA
Cl 6.4(Flavour and Taste (IS 10030))	-	50	NA
Cl 6.6.1(Bacterial Count (IS 5402))	-	400	NA
Cl 6.6.2(Coliform Count ((IS 5402))	-	400	NA
Table 1(vi)(Titratable acidity (as lactic acid) Type I (IS 11766))	-	300	NA
Table 1(vi)(Titratable acidity (as lactic acid) Type II (IS 11766))	-	300	NA
Cl 6.4(Flavour and Taste (IS 10030))	-	50	NA
Cl 6.6.1(Bacterial Count (IS 5402))	-	400	NA
Cl 6.6.2(Coliform Count ((IS 5402))	-	400	NA

14 Feb, 2027

-
-

9690

AES Laboratories Pvt. Ltd., Noida

8117716

IS 13334 : Part 2 (2014)

Skimmed milk powder - Specification: Part 2 extra grade (First Revision)

Extra Grade

7050 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table 1 (i)(Moisture (IS 116231or 16072))	-	300	NA
Table 1 (ii)(Milk protein in milk solids not fat (IS 72192))	-	400	NA
Table 1 (iii)(Milk fat (IS 117213) or Annex B)	-	350	NA
Table 1 (iv)(Insolubility index (IS 12759))	-	350	NA
Table 1 (v)(Total ash (on dry basis), Annex B of IS 14433)	-	300	NA
Table 1 (vi)(Titratable acidity (IS 11766))	-	300	NA
Table 1 (vii)(Lactate content (IS 11202))	-	1500	NA
Table 1 (viii)(Scorched particles (equivalent to Disc B) (IS 13500))	-	350	NA
Table 1 (ix)(Bacterial count (IS 5402))	-	400	NA
Table 1 (x)(Coliform count (IS 5401 - Part 1))	-	400	NA
Table 1 (xi)(Escherichia coli (IS 5887 - Part 1))	-	400	NA
Table 1 (xii)(Coagulase positive Staphylococcus aureus (IS 5887 - Part 2))	-	400	NA
Table 1 (xiii)(Salmonella (IS 5887 - Part 3))	-	400	NA
Table 1 (xiv)(a)(Spore Count: a) Aerobic (Bacillus cereus) Type M (IS 5887 - Part 6))	-	400	NA
Table 1 (xiv)(b)(Spore Count: b) Anaerobic (Sulfite reducing Clostridia) Type M (ISO 15213 : 2003))	-	400	NA
Table 1 (xv)(Listeria monocytogenes (IS 14988 - Part 2 : 2001))	-	400	NA

14 Feb, 2027

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number