BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

11942 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

9781

BIS, Central Laboratory (CL)

None

IS 12744 : Part 1 (2013)

Ready mixed paint, air drying, red oxide - Zinc phosphate, priming - Specification: Part 1 for domestic and decorative applications (First Revision)

- View breakup
Complete testing charges incluidng keeping properties:Rs.10967/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.5.2 (Lead Restriction)	-
Cl.5.3, 8.1 - Table 1 -i) (Drying time hard dry)	-
Cl.5.3, 8.1 - Table 1 -ii) (Consistency )	-
Cl.5.3, 8.1 - Table 1 -iii) (Finish)	-
Cl.5.3, 8.1 - Table 1 -iv) (Colour in Natural Daylight)	-
Cl.5.3, 8.1 - Table 1 -v) (Wet Opacity)	-
Cl.5.3, 8.1 - Table 1 -vi) (Pigment Content)	-
Cl.5.3, 8.1 - Table 1 -vii) (Zinc Phosphate)	-
Cl.5.3, 8.1 - Table 1 -viii) (Red Oxide (as Fe2O3) )	-
Cl.5.3, 8.1 - Table 1 -ix) a) (Flexibility and adhesion a) Scratch Hardness (Load 800 g))	-
Cl.5.3, 8.1 - Table 1 -ix) b) (Flexibility and adhesion b) Bent Test (with 6.25 mm dia mendrel in type 1 apparatus)	-
Cl.5.3, 8.1 - Table 1 -x) a) (Resistance to humidity under conditions of condensation a) Resistance to humidity (for 7 days))	-
Cl.5.3, 8.1 - Table 1 -x) b) (Resistance to humidity under conditions of condensation a) Resistance to Salt Spray (for 96 Hours))	-
Cl.5.3, 8.1 - Table 1 -xi) (Flash Point)	-
Cl.5.3, 8.1 - Table 1 -xii) (Mass)	-
Cl.5.3, 8.1 - Table 1 -xiii) (Keeping Properties)	-

-
Approved sample is required for finish test; EXCLUDING Finish;

9782

BIS, Central Laboratory (CL)

None

IS 428 (2013)

Washable distemper - Specification (Third Revision)

- View breakup
For Initial testing: Oil Emulsion (Type-1) = Rs. (2625+828+300) = Rs. 3,753 = Rs. 3,760 Plastic (Type-2) = Rs. (2700+828+300) = Rs. 3,828 = Rs. 3,830 Only Keeping Properties: Oil Emulsion (Type-1) = Rs. (2550+828+300) = Rs. 3,678 = Rs. 3680 Plastic (Type-2) = Rs. (2625+828+300) = Rs. 3,753 = Rs. 3,760 For Initial Testing With ECO-Mark Requirements (Excluding Keeping Properties): Oil Emulsion (Type-1) = Rs. (5025+855+550) = Rs. 6,430 Plastic (Type-2) = Rs. (5100+855+550) = Rs. 6,505= Rs. 6,510 Preparation of Test Report = Rs. 300.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 6.9.2.2 ( Chromium VI and its compund (Requirement for Eco-Mark))	-
Cl. 6.9.2.2 (Cadmium (Requirement for Eco-Mark))	-
Cl. 6.9.2.2 (Lead (Requirement for Eco-Mark))	-
Cl. 6.9.2.1 (Volatile organic compounds (Requirement for Eco-Mark))	-
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. ix) (Accelerated storage stability)	-
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. viii) (Resistance to alkali)	-
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. vii) (Recoating Properties)	-
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. vi) (Residue on sieve, Type 2)	-
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. vi) (Residue on sieve, Type 1)	-
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. v) (Fastness to light)	-
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. iv) (Colour)	-
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. iii) (Finish)	-
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. ii) (Consistency )	-
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. i) b) (Drying Time a) Hard Dry, Type 2)	-
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. i) b) (Drying Time a) Hard Dry, Type 1)	-
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. i) a) (Drying Time a) Surface Dry, Type 2)	-
Cl.6.6 (Keeping Proterties)	-
Cl.6.5 (Lead Restriction)	-
Cl.6.3 (Application)	-
Cl.6.2 (Thining)	-
Cl.6.1 (Foam and condition)	-

-
Approved sample for finish and colour parameter is required, Weatherometer for fastness to light parameter; EXCLUDING Finish, colour, Fastness to light;

9783

BIS, Central Laboratory (CL)

None

IS 2494 : Part 1 (1994)

V - Belts - Endless V - Belts for industrial purposes: Part 1 general purpose - Specification (Second Revision)

Rs.3000.00. View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
10.1 (Elongation)	-
10.1 (Tensile Strength)	-
7.2.2 (Matched Belts - Code)	-
7.2.1 (Matched Belts - Difference)	-
7.1 (Belt Pitch Length)	-
6.0 (Designation)	-
5 Table 2B (Cross sectional dimension)	-
5 Table 2B (Cross sectional dimension)	-
5 Table 2A (Cross sectional dimension)	-
5 Table 2A (Cross sectional dimension)	-
5 Table 2A (Cross sectional dimension)	-
5 Table 2A (Cross sectional dimension)	-
5 Table 2A (Cross sectional dimension)	-
5 Table 2A (Cross sectional dimension)	-
5 Table 2A (Cross sectional dimension)	-
5 Table 2A (Cross sectional dimension)	-
5 Table 1 (Cross sectional dimension)	-
5 Table 1 (Cross sectional dimension)	-
5 Table 1 (Cross sectional dimension)	-
5 Table 1 (Cross sectional dimension)	-

-
EXCLUDING -; Only Dimension test Avalible

9784

BIS, Central Laboratory (CL)

None

IS 7904 (2018)

High carbon steel wire rods - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Table-1,(Clauses 5.1 and 7.2) (Carbon)	-
Table-1,(Clauses 5.1 and 7.2) (Sulphor)	-
Table-1,(Clauses 5.1 and 7.2) (Phosphorous)	-
Table-1,(Clauses 5.1 and 7.2) (Manganese)	-
Table-1,(Clauses 5.1 and 7.2) (Silicon)	-
Table-1,(Clauses 5.1 and 7.2) (Aluminium)	-
Table-1,(Clauses 5.1 and 7.2) (Chromium)	-
Table-1,(Clauses 5.1 and 7.2) (Nickel)	-
Table-1,(Clauses 5.1 and 7.2) (Molybdenum)	-
Table-1,(Clauses 5.1 and 7.2) (Copper)	-
Table-1,(Clauses 5.1 and 7.2) (Boron)	-
Table-1,(Clauses 5.1 and 7.2) (Vanadium)	-
Table-1,(Clauses 5.1 and 7.2) (Titanium)	-
Table-1,(Clauses 5.1 and 7.2) (Nitrogen)	-
Table-1,(Clauses 5.1 and 7.2) (S+P)	-
Cl 9 (Dimensions & tolerances) ()	-

-
Grade of Steel as per Table 1, Information wrt Micro Alloy addition and type of killing may also be declared. Sample Size 5 pcs of 5x5 cm having dia> 3mm and thickness > 0.8 mm can only be tested.; EXCLUDING -; i] cl 12 surface defects, ii] cl 13 decarburization test, iii] cl 14 non-metallic inclusions, iv] cl 15 microstructure

9785

BIS, Western Regional Laboratory (WRL)

None

IS 1293 (2005)

Plugs and socket- outlets of rated voltage up to and including 250 volts and rated current up to 16 amperes

- View breakup
Plugs & Portable Socket Outlets-2.5A (Only Plugs)-Non-rewiable-Rs.5300/-, Plugs with inslulating sleeves-Rs.5400/- 6A-Rewirable-Rs.5450/-, Non-rewirable-Rs.5500/-, Plugs with insulating sleeves-Rs.6850/-, 10A-Rewirable-Rs.5550/-, Non-rewirable-Rs.5600/-, Plugs with insulating sleeves-Rs.7000/-, 16A-Rewirable-Rs.5750/-, Non-rewiraable-Rs.5800/-, Plugs with insulating sleeves-Rs.7200/-. FIXED SOCKET OUTLETS-6A with screw terminals-5700/-, with screwless terminals-Rs.6650/-, 10A with screw terminals-Rs.5850/-, with screwless terminals-Rs.7250/-, 16A with screw terminals-Rs.6050/-, with screwless terminals-Rs.8100/-, 6/16A with screw terminals-Rs.7800/-, with screwless terminals-Rs.9850/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
29.0 (Resistance to Rusting)	-
28.2 (Resistance to Tracking)	-
28.1.1 (Glow-Wire Test )	-
27.3 (Creepage distances, clearances and distances through sealing compound )	-
27.2 (Creepage distances, clearances and distances through sealing compound )	-
27.1 (Creepage distances, clearances and distances through sealing compound )	-
26.7 (Screws, current carrying parts and connections)	-
26.2 (Screws, current carrying parts and connections)	-
26.1 (Screws, current carrying parts and connections)	-
25.4 (Resistance to heat)	-
25.3 (Resistance to heat)	-
25.2 (Resistance to heat)	-
25.1 (Resistance to heat)	-
25.1 (Resistance to heat)	-
24.14.2 (f)Verification of the Removal of Covers or Cover-Plates )	-
24.14.1 (e)Verification of the Non-removal of Covers or Cover-Plates )	-
24.8 (c) For shuttered socket-outlets )	-
24.6 (b) For screwed glands of accessories other than ordinary)	-
24.3 (a) For surface type socket outlet)	-
24.1 (a) Mechanical Strength )	-
22.2 (Verification of Minimum withdrawal force)	-
22.1 (Verification of Max withdrawal force)	-
21.0 (Normal Operation)	-
21.0 (Normal Operation)	-
21.0 (Normal Operation)	-
21.0 (Normal Operation)	-
20.0 (Making & Breaking Capacity)	-
19.0 (Temperature Rise )	-
18.0 (Operation of Earthing Contacts)	-
17.2 ( Electric Strength)	-
17.1 (Insulation Resistance)	-
16.3 (Resistance to humidity)	-
16.2 (Resistance to Harmful Ingress of Water)	-
16.1 (Resistance to Ageing )	-
15.0 (Interlocked socket-outlets)	-
13.17 (Construction of fixed Socket Outlets)	-
13.16 (Construction of fixed Socket Outlets)	-
13.14 (Construction of fixed Socket Outlets)	-
13.1 (Construction of fixed Socket Outlets)	-
13.9 (Construction of fixed Socket Outlets)	-
13.5 (Construction of fixed Socket Outlets)	-
13.4 (Construction of fixed Socket Outlets)	-
13.4 (Construction of fixed Socket Outlets)	-
13.3 (Construction of fixed Socket Outlets)	-
13.2 (Construction of fixed Socket Outlets)	-
13.1 (Construction of fixed Socket Outlets)	-
12.2.11 (Terminals)	-
12.2.10 (Terminals)	-
12.2.9 (Terminals)	-
12.2.7 (Terminals)	-
12.2.5 (Terminals)	-
12.2.4 (Terminals)	-
12.2.3 (Terminals)	-
12.2.2 (Terminals)	-
12.2.1 (Terminals)	-
12.1 (Terminals)	-
11.5 (Provision for Earthing)	-
11.2 (Provision for Earthing)	-
11.1 (Provision for Earthing)	-
10.6 (Protection against Electric Shock)	-
10.5 (Protection against Electric Shock)	-
10.3 (Protection against Electric Shock)	-
10.1 (Protection against Electric Shock)	-
10.1 (Protection against Electric Shock)	-
9.0 (16 A)	-
9.0 (16 A)	-
9.0 (16 A)	-
9.0 (6A/10A )	-
9.0 (6A/10A )	-
9.0 (6A/10A )	-
9.0 (Checking of dimensions)	-
8.0 (Marking)	-
8.0 (Marking)	-
8.0 (Marking)	-
8.0 (Marking)	-
8.0 (Marking)	-
8.0 (Marking)	-
8.0 (Marking)	-
8.0 (Marking)	-
8.0 (Marking)	-
7.0 (Classification)	-
7.0 (Classification)	-
7.0 (Classification)	-
7.0 (Classification)	-
7.0 (Classification)	-
7.0 (Classification)	-
7.0 (Classification)	-
7.0 (Classification)	-
7.0 (Classification)	-
7.0 (Classification)	-
7.0 (Classification)	-
6.0 (Ratings)	-
6.0 (Ratings)	-
30.4 (Addiitional tests on pins provided with insulating sleeves - Tests at Low Temperature)	-
30.3 (Addiitional tests on pins provided with insulating sleeves - Impact Test at Low Temperature)	-
30.2 (Addiitional tests on pins provided with insulating sleeves - Static Damp Heat Test)	-
30.1 (Addiitional tests on pins provided with insulating sleeves - Pressure Test at High Temperature)	-
28.1.2 (Addiitional tests for plugs with pins provided with insulating sleeves)	-
24.18 (Verification of the Removal of Covers or Cover-Plates )	-
24.17 (Verification of the Removal of Covers or Cover-Plates )	-
24.16 (Verification of the Removal of Covers or Cover-Plates )	-
24.15 (Verification of the Removal of Covers or Cover-Plates )	-
24.13 (For portable socket outlets having means for suspension on a wall)	-
24.12 (For portable socket outlets having means for suspension on a wall)	-
24.11 (For portable socket outlets having means for suspension on a wall)	-
24.1 (For plugs)	-
24.9 (For portable multiple and combined socket outlets)	-
24.7 (For plug pins provided with insulating sleeves)	-
24.5 (For Portable single socket outlets/ plugs)	-
24.4 (For Portable socket outlets/ plugs)	-
24.2 (For Portable single socket outlets/ plugs)	-
23.4 (Flexible cables & their connection )	-
23.3 (Flexible cables & their connection )	-
23.2 (Flexible cables & their connection )	-
23.1 (Flexible cables & their connection )	-
14.15 (Construction of Plugs & Portables socket outlet )	-
14.11 (Construction of Plugs & Portables socket outlet )	-
14.1 (Construction of Plugs & Portables socket outlet )	-
14.9 (Construction of Plugs & Portables socket outlet )	-
14.9 (Construction of Plugs & Portables socket outlet )	-
14.8 (Construction of Plugs & Portables socket outlet )	-
14.7 (Construction of Plugs & Portables socket outlet )	-
14.3 (Construction of Plugs & Portables socket outlet )	-
14.2 (Construction of Plugs & Portables socket outlet )	-
14.1 (Construction of Plugs & Portables socket outlet )	-
12.1 (Terminals)	-
10.4 (Protection against Electric Shock)	-
10.1 (Protection against Electric Shock)	-
10.1 (Protection against Electric Shock)	-
9 (16 A)	-
9 (16 A)	-
9 (16 A)	-
9 (16 A)	-
9 (16 A)	-
9 (6A/10A )	-
9 (6A/10A )	-
9 (6A/10A )	-
9 (6A/10A )	-
9 (6A/10A )	-
8 (Marking)	-

-
-

9786

RAJKOT ENGINEERING TESTING AND RESEARCH CENTRE, RAJKOT

7167626

IS 9079 (2018)

Monoset pumps for clear, cold water for agricultural and water supply purposes - Specification (Third Revision)

upto 54 kW

23624.99 View breakup
Up to 3.7 kW:- Rs. 10125 3.8-7.5 kW:- Rs. 11475 7.6-11.0 kW:- Rs. 12825 11.1-15.0 kW:- Rs. 14175 15.1-20.0 kW:- Rs. 15525 20.1-25.0 kW:- Rs. 16875 25.1-30.0 kW:- Rs. 18225 30.1-35.0 kW:- Rs. 19575 35.1-40.0 kW:- Rs. 20925 40.1-45.0 kW:- Rs. 22275 45.1-50.0 kW:- Rs. 23625

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1(GENERAL REQUIREMENTS Casing)	-	2	2 % of total complete testing charge
10.2(GENERAL REQUIREMENTS Impeller)	-	2	2 % of total complete testing charge
10.3(GENERAL REQUIREMENTS Shaft)	-	2	2 % of total complete testing charge
7.1(DIRECTION OF ROTATION (Cl 7))	-	2	2 % of total complete testing charge
7.2(DIRECTION OF ROTATION (Cl 7))	-	2	2 % of total complete testing charge
9.1(DESIGN FEATURES (Cl 9))	-	2	2 % of total complete testing charge
9.2(DESIGN FEATURES (Cl 9))	-	2	2 % of total complete testing charge
13.1(Guarantee and tolerances on Pump Performance (Cl 13))	-	2	2 % of total complete testing charge
13.2(Guarantee and tolerances on Pump Performance (Cl 13))	-	2	2 % of total complete testing charge
8.2 IS 11346 : 2002(Verification of Guarantee Rate of flow and head (Cl.8.2 IS 11346 : 2002))	-	2	2 % of total complete testing charge
8.2 IS 11346 : 2002(Verification of Guarantee Rate of flow and head (Cl.8.2 IS 11346 : 2002))	-	2	2 % of total complete testing charge
12.5(Efficiency)	-	2	2 % of total complete testing charge
Cl.8.3 b IS 11346 : 2002(Overall efficiency)	-	2	2 % of total complete testing charge
Cl13.2.3 IS 9079:2002(Current consumption)	-	2	2 % of total complete testing charge
9.1(DESIGN FEATURES (Cl 9))	-	2	2 % of total complete testing charge
9.2(DESIGN FEATURES (Cl 9))	-	2	2 % of total complete testing charge
13.1(Guarantee and tolerances on Pump Performance (Cl 13))	-	2	2 % of total complete testing charge
13.2(Guarantee and tolerances on Pump Performance (Cl 13))	-	2	2 % of total complete testing charge
13.1.1 (8.2 of IS 11346 : 2002)(Verification of Guarantee Rate of flow and head (Cl.8.2 IS 11346 : 2002))	-	2	2 % of total complete testing charge
13.1.1 (8.2 of IS 11346 : 2002)(Verification of Guarantee Rate of flow and head (Cl.8.2 IS 11346 : 2002))	-	2	2 % of total complete testing charge
12.5(Efficiency)	-	2	2 % of total complete testing charge
Cl.8.3 b IS 11346 : 2002(Overall efficiency)	-	2	2 % of total complete testing charge
Cl13.2.3 IS 9079:2002(Current consumption)	-	2	2 % of total complete testing charge
10.6.2, 10.6.3(Direction of Rotation)	-	2	2 % of total complete testing charge
10.6.1(Terminal Marking)	-	2	2 % of total complete testing charge
13.1.1(The pumpset shall be guaranteed for their performance of the nominal volume rate of flow and the nominal head at the guaranteed duty point. The overall efficiency of the pumpset shall be guaranteed at the declared duty point only.)	-	2	2 % of total complete testing charge
13.1.2(The guarantee shall be deemed to have been met with, if the measured values of head, volume rate of flow and overall efficiency are within the limits indicated in clause 8 of IS 11346. However, after applying the tolerance, overall efficiency value shall not be less than that derived from Fig. 3 to 6.)	-	2	2 % of total complete testing charge
13.1.3(Monoset motor shall not get overloaded in the specified operating head range at rated voltage and supply frequency.)	-	2	2 % of total complete testing charge
13.1.4(The tolerance shall apply to guaranteed duty point only.)	-	2	2 % of total complete testing charge
7(Contructional Features)	-	2	2 % of total complete testing charge
7.1(Material of Construction)	-	2	2 % of total complete testing charge
7.2(Gaskets.Seals and packings)	-	2	2 % of total complete testing charge
9(Design Features)	-	2	2 % of total complete testing charge
9.1.1(The pump may be equipped with replaceable bearing and wearing ring, wherever provided.)	-	2	2 % of total complete testing charge
9.1.2(The pump shall be capable to perform as per guaranteed duty point at the manometric suction lift as specified in Table 1.)	-	2	2 % of total complete testing charge
9.3(The manufacturer shall have a system of controlling dimensional accuracy within a scheme of fits and tolerance limits. The system shall help interchangeability and fitment at site for replacement spares during subsequent repair and maintenance.)	-	2	2 % of total complete testing charge
9.4(The pump efficiency of monoset pumps at duty point as declared by the manufacturer for 2 and 4 poles shall not be less than given in Fig. 3 to Fig. 6 and beyond this range, the efficiency shall be declared by manufacturer.)	-	2	2 % of total complete testing charge
10.4.1, 10.4.2, 10.4.3, 10.4.4(General Requirements(Balancing))	-	2	2 % of total complete testing charge
10.5(Provision of Earthing)	-	2	2 % of total complete testing charge
11.8.1(a)(Measurement of stator resistance)	-	2	2 % of total complete testing charge
11.8.1(b)(High Voltage test)	-	2	2 % of total complete testing charge
11.8.1(d)(No load test at rated voltage)	-	2	2 % of total complete testing charge
11.8.1(g)(Reduced voltage running up test at no load)	-	2	2 % of total complete testing charge
11.8.1(f)(Breakaway (starting) torque)	-	2	2 % of total complete testing charge
11.8.1(e)(Locked rotor)	-	2	2 % of total complete testing charge
11.8.1(h)(Temperature rise test at rated voltage)	-	2	2 % of total complete testing charge
11.8.1(j)(Temperature rise test at reduced voltage)	-	2	2 % of total complete testing charge
8.6.5(If four core cable is used, the fourth core is to be used for earthing.)	-	2	2 % of total complete testing charge

25 Mar, 2027

-
Flow: up to 83.333 LPS/ 4999.98 LPM/ 299998.8 LPH Delivery Head: up to 600 MWC Suction Head: up to 10.19 MWC Current: 180A P: 50 to 54000W

9787

RAJKOT ENGINEERING TESTING AND RESEARCH CENTRE, RAJKOT

7167626

IS 14220 (2018)

Openwell submersible pumpsets - Specification (First Revision)

upto 54 kW

16200 View breakup
Up to 3.7 kW:- Rs. 6480 3.8-7.5 kW:- Rs. 7560 7.6-11.0 kW:- Rs. 8640 11.1-15.0 kW:- Rs. 9180 15.1-20.0 kW:- Rs. 9720 20.1-25.0 kW:- Rs. 10800 25.1-30.0 kW:- Rs. 11880 30.1-35.0 kW:- Rs. 13500 35.1-40.0 kW:- Rs. 13800 40.1-45.0 kW:- Rs. 14256 45.1-50.0 kW:- Rs. 16200

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1(Design Features)	-	2	2% of total complete testing charge
8.1.1(Design Features)	-	2	2% of total complete testing charge
8.1.4(Design Features)	-	2	2% of total complete testing charge
8.1.5(Design Features)	-	2	2% of total complete testing charge
8.1.5(Design Features)	-	2	2% of total complete testing charge
8.1.7(Design Features)	-	2	2% of total complete testing charge
9(Efficiency)	-	2	2% of total complete testing charge
10(Performance (Cl 17.1 of IS 5120))	-	2	2% of total complete testing charge
10(Suction and Delivery Ends (Cl 17.2 of IS 5120))	-	2	2% of total complete testing charge
10(Suction and Delivery Ends (Cl 17.2.1 of IS 5120))	-	2	2% of total complete testing charge
10(Fluid Passages (Cl 17.3 of IS 5120))	-	2	2% of total complete testing charge
10(Draining Plugrs (Cl 17.4 of IS 5120))	-	2	2% of total complete testing charge
10(Lantern Ring (Cl 17.5 of IS 5120))	-	2	2% of total complete testing charge
10(Casing (Cl 17.6 of IS 5120))	-	2	2% of total complete testing charge
10(Impeller (Cl 17.7 of IS 5120))	-	2	2% of total complete testing charge
10(Shaft (Cl 17.8 of IS 5120))	-	2	2% of total complete testing charge
10(Shaft Couplings (Cl 17.9 of IS 5120))	-	2	2% of total complete testing charge
10(Bearings (Cl 17.10 of IS 5120))	-	2	2% of total complete testing charge
10(Bearings (Cl 17.10.1 of IS 5120))	-	2	2% of total complete testing charge
10(Bearings (Cl 17.10.2 of IS 5120))	-	2	2% of total complete testing charge
10( Stuffing Boxes (Cl 17.11 of IS 5120))	-	2	2% of total complete testing charge
10(Base Plates (Cl 17.12 of IS 5120))	-	2	2% of total complete testing charge
10(Name Plate (Cl 17.14 of IS 5120))	-	2	2% of total complete testing charge
10(Name Plate (Cl 17.14 of IS 5120))	-	2	2% of total complete testing charge
10(Name Plate (Cl 17.14.1 of IS 5120))	-	2	2% of total complete testing charge
10.2(Casing)	-	2	2% of total complete testing charge
10.3(Impeller)	-	2	2% of total complete testing charge
10.4.1(Shaft)	-	2	2% of total complete testing charge
10.4.2(Shaft)	-	2	2% of total complete testing charge
10.5.1(Balancing)	-	2	2% of total complete testing charge
10.5.2(Balancing)	-	2	2% of total complete testing charge
10.5.3(Balancing)	-	2	2% of total complete testing charge
10.5.4(Balancing)	-	2	2% of total complete testing charge
10.6.1( Provision for Earthing)	-	2	2% of total complete testing charge
10.6.2( Provision for Earthing)	-	2	2% of total complete testing charge
10.6.3( Provision for Earthing)	-	2	2% of total complete testing charge
10.6.4( Provision for Earthing)	-	2	2% of total complete testing charge
10.7.1(Terminal Marking and Direction of Rotation)	-	2	2% of total complete testing charge
10.7.2(Terminal Marking and Direction of Rotation)	-	2	2% of total complete testing charge
10.7.3(Terminal Marking and Direction of Rotation)	-	2	2% of total complete testing charge
15.2(Laboratory Tests Cl.8 of IS 11346-2002 Rate of flow and head Cl.8 of IS 11346-2002)	-	2	2% of total complete testing charge
15.2(Laboratory Tests Cl.8 of IS 11346-2002 Efficiency Cl.8.3 of IS 11346-2002)	-	2	2% of total complete testing charge
15.5(Hydrostatic Pressure Test)	-	2	2% of total complete testing charge
16.1.1( Guarantee of Performance)	-	2	2% of total complete testing charge
16.1.2( Guarantee of Performance)	-	2	2% of total complete testing charge
16.1.3( Guarantee of Performance)	-	2	2% of total complete testing charge
16.1.4( Guarantee of Performance)	-	2	2% of total complete testing charge
16.1.5( Guarantee of Performance)	-	2	2% of total complete testing charge
18.1(Marking)	-	2	2% of total complete testing charge
18.1(Marking)	-	2	2% of total complete testing charge
18.1(Marking)	-	2	2% of total complete testing charge
18.1(Marking)	-	2	2% of total complete testing charge
18.1(Marking)	-	2	2% of total complete testing charge
18.1(Marking)	-	2	2% of total complete testing charge
18.1(Marking)	-	2	2% of total complete testing charge
18.1(Marking)	-	2	2% of total complete testing charge
18.1(Marking)	-	2	2% of total complete testing charge
18.1(Marking)	-	2	2% of total complete testing charge
18.1(Marking)	-	2	2% of total complete testing charge
18.1(Marking)	-	2	2% of total complete testing charge
18.1(Marking)	-	2	2% of total complete testing charge
18.1(Marking)	-	2	2% of total complete testing charge
18.1(Marking)	-	2	2% of total complete testing charge
18.1(Marking)	-	2	2% of total complete testing charge
18.1(Marking)	-	2	2% of total complete testing charge
18.1(Marking)	-	2	2% of total complete testing charge
18.1(Marking)	-	2	2% of total complete testing charge
18.1.3(Marking)	-	2	2% of total complete testing charge
7(Constructional features)	-	2	2% of total complete testing charge
7.1(It is recognized that a number of materials of construction are available to meet the needs for pumps handling clear, cold water.)	-	2	2% of total complete testing charge
7.2(Gaskets, seals and packings used for clear, cold water pumps shall conform to the applicable requirements specified in 5.2 of IS 5120.)	-	2	2% of total complete testing charge
7.3(The motor shall be provided with a breathing attachment like bellows, diaphragm etc; to compensate the volumetric variation of water inside the motor due to change in the temperature.)	-	2	2% of total complete testing charge
7.4(The motor shall be protected from ingress of well water, sand and other foreign matter by means of cable glands, rubber seals etc.)	-	2	2% of total complete testing charge
7.5(All materials and components for the motor shall be suitable for application in respect of resistance and mechanical performance to protect it)	-	2	2% of total complete testing charge
7.6(The rotor of the wet type open well submersible motor and rotor in water filled designed motor shall be provided with suitable coating from corrosion under water. However if suitable anticorrosion additive is added in the water, no separate protection on rotors is necessary.)	-	2	2% of total complete testing charge
8(Design Features)	-	2	2% of total complete testing charge
8.1.2(The multi-stage pump shaft may be guided through bearings, the bearings may be provided in stage casing, suction housing and discharge casing, while in case of intermediate bearings, suitable positions may be selected in the overall span.)	-	2	2% of total complete testing charge
8.1.3(The pump may be equipped with replaceable bearing and wearing ring, wherever provided.)	-	2	2% of total complete testing charge
8.1.4(The strainer on the suction shall offer the best compromise amongst restraining large solids from entering the pump and containing the suction losses to the minimum.)	-	2	2% of total complete testing charge
8.1.5(The pump shall be capable to give discharge without overloading the prime mover within the permissible current at rated voltage and supply frequency at minimum +5 percent and minimum –15 percent of the guaranteed duty point head up to 30 m. Above 30 m, the pump shall be capable to give discharge without overloading the prime mover within the permissible current at rated voltage and supply frequency at minimum +10 percent and minimum –25 percent of the guaranteed duty point head.)	-	2	2% of total complete testing charge
12(Cable)	-	2	2% of total complete testing charge
12.1(Flat/Round cables as per IS694 shall be used)	-	2	2% of total complete testing charge
12.1.2(The size of the conductor shall be adequate and suitable for contineous use under water and in air. the length of the cable shall be minimum 2 m externallly unless otherwise specified by the customer)	-	2	2% of total complete testing charge
12.1.3(The size and of the cable should be suitably selected so that the voltage drop between control panel and the mptor terminal does not exeed three percent of the rated voltage)	-	2	2% of total complete testing charge
12.1.4(In case a joint is required to be made between the lead cable supplied with the motor and the user’s cable, a detailed procedure to make water tight joining shall be supplied by the motor manufacturer.)	-	2	2% of total complete testing charge
12.1.5(If four core cable is used, the fourth core is to be used for earthing.)	-	2	2% of total complete testing charge
14.10.1(Type test)	-	2	2% of total complete testing charge
14.10.1(a)(Insulation Resistance test)	-	2	2% of total complete testing charge
14.10.1(b)(High Voltage test)	-	2	2% of total complete testing charge
14.10.1(c)(Measurement of stator resistance)	-	2	2% of total complete testing charge
14.10.1(d)(No load test at rated voltage)	-	2	2% of total complete testing charge
14.10.1(e)(Reduced voltage running up test at no load)	-	2	2% of total complete testing charge
14.10.1(f)(Locked rotor)	-	2	2% of total complete testing charge
14.10.1(g)(Breakaway (starting) torque)	-	2	2% of total complete testing charge
14.10.1(h)(Leakage current test;)	-	2	2% of total complete testing charge
14.10.1(j)(Temperature rise test at rated voltage)	-	2	2% of total complete testing charge
14.10.1(k)(Temperature rise test at reduced voltage)	-	2	2% of total complete testing charge
16.1(Guarntee of Performance)	-	2	2% of total complete testing charge
16.1.1(The pumpset shall be guaranteed for their performance of the nominal volume rate of flow and the nominal head at the guaranteed duty point. The overall efficiency of the pumpset shall be guaranteed at the declared duty point only.)	-	2	2% of total complete testing charge
16.1.2(The guarantee shall be deemed to have been met with, if the measured values of head, volume rate of flow and overall efficiency are within the indicated in IS 11346 limits)	-	2	2% of total complete testing charge
16.1.3(Open well submersible motor shall not get overloaded in the specified operating head range at rated voltage and supply frequency.)	-	2	2% of total complete testing charge
16.1.4(The pump shall be tested for the operating head range as per 8.1.5.)	-	2	2% of total complete testing charge
16.1.5(The overloading of motor is that condition when maximum current drawn by the motor exceeds the limit of 1.07 times of the rated motor current)	-	2	2% of total complete testing charge
16.1.6(The tolerance shall apply to guaranteed duty point only.)	-	2	2% of total complete testing charge
16.1.7(Performance at rated voltage and supply frequency is actual performance of the set. This is better than performance at rated speed, since in the entire operating head range speed of motor is higher than rated speed, as motor is running in under loaded condition.)	-	2	2% of total complete testing charge
16.1.8(The manufacturer shall specify the minimum submergence of pump unit at duty point.)	-	2	2% of total complete testing charge

25 Mar, 2027

-
Flow: up to 83.333 LPS/ 4999.98 LPM/ 299998.8 LPH Delivery Head: up to 600 MWC Suction Head: up to 10.19 MWC Current: 180A P: 50 to 54000W

9788

RAJKOT ENGINEERING TESTING AND RESEARCH CENTRE, RAJKOT

7167626

IS 9283 (2013)

Motors for submersible pumpsets - Specification (Second Revision)

upto 54 kW

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Construction, IS 9283)	-	16200	2% of total complete testing charge based on kW
5.1.1(Construction, IS 9283)	-	2	2% of total complete testing charge based on kW
5.1.2(Construction, IS 9283)	-	2	2% of total complete testing charge based on kW
5.1.3(Construction, IS 9283)	-	2	2% of total complete testing charge based on kW
5.1.4(Construction, IS 9283)	-	2	2% of total complete testing charge based on kW
5.2.1(Earthing, IS 9283)	-	2	2% of total complete testing charge based on kW
5.2.2(Earthing, IS 9283)	-	2	2% of total complete testing charge based on kW
5.2.3(Earthing, IS 9283)	-	2	2% of total complete testing charge based on kW
5.2.4(Earthing, IS 9283)	-	2	2% of total complete testing charge based on kW
5.2.5(Earthing, IS 9283)	-	2	2% of total complete testing charge based on kW
5.3(Foreign Matter, IS 9283)	-	2	2% of total complete testing charge based on kW
5.5(Finish of Bearings, IS 9283)	-	2	2% of total complete testing charge based on kW
5.6(Balancing of Rotor, IS 9283)	-	2	2% of total complete testing charge based on kW
7.1(Dimensions of Motors, IS 9283)	-	2	2% of total complete testing charge based on kW
7.2.1(Tolerances, IS 9283)	-	2	2% of total complete testing charge based on kW
7.2.2(Tolerances, IS 9283)	-	2	2% of total complete testing charge based on kW
8(Type of duty, IS 9283)	-	2	2% of total complete testing charge based on kW
13(Terminal Markings, IS 9283)	-	2	2% of total complete testing charge based on kW
15.1(Marking, IS 9283)	-	2	2% of total complete testing charge based on kW
15.1(Marking, IS 9283)	-	2	2% of total complete testing charge based on kW
15.1(Marking, IS 9283)	-	2	2% of total complete testing charge based on kW
15.1(Marking, IS 9283)	-	2	2% of total complete testing charge based on kW
15.1(Marking, IS 9283)	-	2	2% of total complete testing charge based on kW
15.1(Marking, IS 9283)	-	2	2% of total complete testing charge based on kW
15.1(Marking, IS 9283)	-	2	2% of total complete testing charge based on kW
15.1(Marking, IS 9283)	-	2	2% of total complete testing charge based on kW
15.1(Marking, IS 9283)	-	2	2% of total complete testing charge based on kW
15.1(Marking, IS 9283)	-	2	2% of total complete testing charge based on kW
15.1(Marking, IS 9283)	-	2	2% of total complete testing charge based on kW
15.1(Marking, IS 9283)	-	2	2% of total complete testing charge based on kW
15.1(Marking, IS 9283)	-	2	2% of total complete testing charge based on kW
15.3(Marking, IS 9283)	-	2	2% of total complete testing charge based on kW
17.1(Performance values, IS 9283)	-	2	2% of total complete testing charge based on kW
17.1(Performance values, IS 9283)	-	2	2% of total complete testing charge based on kW
17.1(Performance values, IS 9283)	-	2	2% of total complete testing charge based on kW
17.1(Performance values, IS 9283)	-	2	2% of total complete testing charge based on kW
18.1(Overload test, IS 9283)	-	2	2% of total complete testing charge based on kW
19(Temperature rise test, IS 9283)	-	2	2% of total complete testing charge based on kW
19(Temperature rise test, IS 9283)	-	2	2% of total complete testing charge based on kW
20(High Voltage test, IS 9283)	-	2	2% of total complete testing charge based on kW
21(Insulation Resistance test, IS 9283)	-	2	2% of total complete testing charge based on kW
22(Speed, IS 9283)	-	2	2% of total complete testing charge based on kW
23(Leakage Current test, IS 9283)	-	2	2% of total complete testing charge based on kW

25 Mar, 2027

-
Flow: up to 83.333 LPS/ 4999.98 LPM/ 299998.8 LPH Delivery Head: up to 600 MWC Suction Head: up to 10.19 MWC Current: 180A P: 50 to 54000W

9789

Testtex India Laboratories Private Limited, Noida

8138306

IS 4151 (1993.0)

Protective helmets for motorcycle riders - Specification

All

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Shell)	-	200	NA
4.5(Metal Parts)	-	800	NA
4.6(Visor)	-	550	Refer to IS 9973
6.1(General)	-	400	NA
6.2(Shell)	-	300	NA
6.3(Protactive Padding)	-	300	NA
6.4(Retention System)	-	700	NA
5.1(Size)	-	300	NA
6.5(Pheripheral Vision)	-	800	NA
6.6(Visor)	-	5500	Refer to IS 9973
6.8(Workmanship and Finish)	-	500	NA
8.0(Mass)	-	300	NA
9.1(Impact Absorption)	-	5200	NA
9.2(Resistance to Penetration)	-	1000	NA
9.3(Rigidity test)	-	900	NA
9.4(Dynamic test of Retention System)	-	900	NA
9.5(Audibility test)	-	900	NA
9.6(Retention test)	-	800	NA
9.7(Opening Angle (Visor) test)	-	700	NA
9.8(Flexibility of Peak)	-	600	NA

31 Dec, 2026

-
-

9790

BIS, Central Laboratory (CL)

None

IS 15410 (2003)

Containers for packaging of natural mineral water and packaged drinking water - Specification

Rs- 5850.0 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.0 (chem) (MATERIAL)	-
4.6.2 (TRANSPARANCY)	-
4.6.3 (LEAKAGE TEST)	-
4.6.4 (DROP TEST)	-
4.6.4, clause 8 of IS:2798:1998 (Drop test )	-
4.6.3, clause 6 of IS:2798:1998 (Leakage test- c. Air pressure leakage)	-
4.6.3, clause 6 of IS:2798:1998 (Leakage test- a. Closure leakage )	-
4.6.2 Annex A (Transparency)	-
4.5, IS:2798:1998 (Wall thickness- Bottom, in mm)	-
4.5, IS:2798:1998 (Wall thickness- Middle , in mm)	-
4.5, IS:2798:1998 (Wall thickness- Top , in mm )	-
4.4 , clause 5 of IS:2798:1998 (Brimful capacity in ml)	-
4.3 (Workmanship, Finish & Appearance)	-
4.2 (Design, Shape & Dimension )	-
4.6.5 (MIGRATION TEST)	-
4.6.6 (PORTABILITY TEST)	-
4.1 (Material)	-
4.6.6 (chem) (Water Potability test (after 30 days) (a) Taste (b) Odour)	-
4.6.5.1 (chem) (Colour migration (Container))	-
4.6.5.1 (chem) (Colour migration (Caps))	-
4.6.5 , IS:9845:1998 (chem) (Migration- b. Amount of extractive)	-
4.6.5 , IS:9845:1998 (chem) (Migration- a. Amount of extractive)	-
4.6.5.1 (chem) (Colour migration (Caps))	-
4.6.3, clause 6 of IS:2798:1998 (Leakage test- b. Vibration leakage)	-

-
200 ml & 250 ml (50 Empty Bottle + 80 Caps), 500 ml & 1 Litre (30 Empty Bottle + 80 Caps), 2 Litre (15 Empty Bottle + 80 Caps), 5 Litre ( 10 Empty Bottle + 40 Caps), 20 Litre (06 Empty Jar + 40 Caps)

9791

DELHI TEST HOUSE, Azadhpur

8131406

IS 9573 : Part 1 (2017)

Rubber hose for liquefied petroleum gas (Lpg) - Specification: Part 1 industrial application (Fourth Revision)

15000 View breakup
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.15000.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.1 (General)	-	250	For BIS samples: 1.5 times of BIS testing charges
Clause 4.2(Material)	-	500	For BIS samples: 1.5 times of BIS testing charges
Clause 4.2.1(Lining)	-	200	For BIS samples: 1.5 times of BIS testing charges
Clause 4.2.2(Reinforcement)	-	200	For BIS samples: 1.5 times of BIS testing charges
Clause 4.2.3(Cover)	-	200	For BIS samples: 1.5 times of BIS testing charges
Clause 4.3 Sub Clause 4.3.1 Table 1(Bore Size)	-	200	For BIS samples: 1.5 times of BIS testing charges
Clause 4.3 Sub Clause 4.3.2 (a)(Thickness of Lining and Cover)	-	200	For BIS samples: 1.5 times of BIS testing charges
Clause 4.3 Sub Clause 4.3.2 (b)(Thickness of Lining and Cover)	-	200	For BIS samples: 1.5 times of BIS testing charges
Clause 4.3 Sub Clause 4.3.3(Length)	-	200	For BIS samples: 1.5 times of BIS testing charges
Clause 4.4 Sub Clause 4.4.1 Table 2 (i) (a)(Tensile Strength- Lining)	-	650	For BIS samples: 1.5 times of BIS testing charges
Clause 4.4 Sub Clause 4.4.1 Table 2 (i) (b)(Tensile Strength- cover)	-	650	For BIS samples: 1.5 times of BIS testing charges
Clause 4.4 Sub Clause 4.4.1 Table 2 (ii) (a)(Elongation at break- Lining)	-	650	For BIS samples: 1.5 times of BIS testing charges
Clause 4.4 Sub Clause 4.4.1 Table 2 (ii) (b)(Elongation at break- cover)	-	650	For BIS samples: 1.5 times of BIS testing charges
Clause 4.4 Sub Clause 4.4.2 (a)(Accelerated Ageing Test lining)	-	750	For BIS samples: 1.5 times of BIS testing charges
Clause 4.4 Sub Clause 4.4.2 (b)(Accelerated Ageing Test lining)	-	750	For BIS samples: 1.5 times of BIS testing charges
Clause 4.4 Sub Clause 4.4.2 (a)(Accelerated Ageing Test cover)	-	750	For BIS samples: 1.5 times of BIS testing charges
Clause 4.4 Sub Clause 4.4.2 (b)(Accelerated Ageing Test cover)	-	750	For BIS samples: 1.5 times of BIS testing charges
Clause 4.4 Sub Clause 4.4.3 (a)(Resistance of Lining to n-pentane)	-	1000	For BIS samples: 1.5 times of BIS testing charges
Clause 4.4 Sub Clause 4.4.3 (b)(Resistance of Lining to n-pentane)	-	1000	For BIS samples: 1.5 times of BIS testing charges
Clause 4.5 Sub clause 4.5.1(Adhesion)	-	1500	For BIS samples: 1.5 times of BIS testing charges
Clause 4.5 Sub clause 4.5.2(Low Temperature Flexibility)	-	1000	For BIS samples: 1.5 times of BIS testing charges
Clause 4.5 Sub clause 4.5.3(Flexibility of Hose)	-	750	For BIS samples: 1.5 times of BIS testing charges
Clause 4.5 Sub clause 4.5.4(Ozone Resistance)	-	2000	For BIS samples: 1.5 times of BIS testing charges
Clause 4.5 Sub clause 4.5.5 4.5.5.1(Proof pressure test)	-	1000	For BIS samples: 1.5 times of BIS testing charges
Clause 4.5 Sub clause 4.5.5 4.5.5.2(Bursting pressure)	-	1000	For BIS samples: 1.5 times of BIS testing charges
Clause 4.5 Sub clause 4.5.6(Electrical Continuity Test)	-	1000	For BIS samples: 1.5 times of BIS testing charges
Clause 4.5 Sub clause 4.5.7(Burning Behaviour)	-	1000	For BIS samples: 1.5 times of BIS testing charges

17 Jun, 2027

-
-

9792

DELHI TEST HOUSE, Azadhpur

8131406

IS 9573 : Part 2 (2017)

Rubber hose for liquefied petroleum gas (Lpg) - Specification: Part 2 domestic and commercial application (Fourth Revision)

15000 View breakup
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.15000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.2(Material)	-	500	For BIS samples: 1.5 times of BIS testing charges
Clause 4.2.1(Lining)	-	0	For BIS samples: 1.5 times of BIS testing charges
Clause 4.2.2 (a)(Reinforcement)	-	0	For BIS samples: 1.5 times of BIS testing charges
Clause 4.2.2 (b)(Reinforcement)	-	0	For BIS samples: 1.5 times of BIS testing charges
Clause 4.2.3(Cover)	-	0	For BIS samples: 1.5 times of BIS testing charges
Clause 4.3 Sub Clause 4.3.1 Table 1(Bore Size)	-	150	For BIS samples: 1.5 times of BIS testing charges
Clause 4.3 Sub Clause 4.3.2 (a)(Thickness of Lining and Cover)	-	150	For BIS samples: 1.5 times of BIS testing charges
Clause 4.3 Sub Clause 4.3.2 (b)(Thickness of Lining and Cover)	-	150	For BIS samples: 1.5 times of BIS testing charges
Clause 4.3 Sub Clause 4.3.3(Length)	-	150	For BIS samples: 1.5 times of BIS testing charges
Clause 4.4 Sub Clause 4.4.1 Table 2 (i) (a)(Tensile Strength- Lining)	-	750	For BIS samples: 1.5 times of BIS testing charges
Clause 4.4 Sub Clause 4.4.1 Table 2 (i) (b)(Tensile Strength- cover)	-	750	For BIS samples: 1.5 times of BIS testing charges
Clause 4.4 Sub Clause 4.4.1 Table 2 (ii) (a)(Elongation at break- Lining)	-	750	For BIS samples: 1.5 times of BIS testing charges
Clause 4.4 Sub Clause 4.4.1 Table 2 (ii) (b)(Elongation at break- Cover)	-	750	For BIS samples: 1.5 times of BIS testing charges
Clause 4.4 Sub Clause 4.4.2 (a)(Accelerated Ageing Test lining)	-	1000	For BIS samples: 1.5 times of BIS testing charges
Clause 4.4 Sub Clause 4.4.2 (b)(Accelerated Ageing Test lining)	-	1000	For BIS samples: 1.5 times of BIS testing charges
Clause 4.4 Sub Clause 4.4.2 (a)(Accelerated Ageing Test cover)	-	1000	For BIS samples: 1.5 times of BIS testing charges
Clause 4.4 Sub Clause 4.4.2 (b)(Accelerated Ageing Test cover)	-	1000	For BIS samples: 1.5 times of BIS testing charges
Clause 4.4 Sub Clause 4.4.3 (a)(Resistance of Lining to n-pentane)	-	1500	For BIS samples: 1.5 times of BIS testing charges
Clause 4.4 Sub Clause 4.4.3 (b)(Resistance of Lining to n-pentane)	-	1500	For BIS samples: 1.5 times of BIS testing charges
Clause 4.5 Sub clause 4.5.1(Adhesion)	-	1500	For BIS samples: 1.5 times of BIS testing charges
Clause 4.5 Sub clause 4.5.2(Low Temperature Flexibility)	-	750	For BIS samples: 1.5 times of BIS testing charges
Clause 4.5 Sub clause 4.5.3(Flexibility of Hose)	-	750	For BIS samples: 1.5 times of BIS testing charges
Clause 4.5 Sub clause 4.5.4(Ozone Resistance)	-	2000	For BIS samples: 1.5 times of BIS testing charges
Clause 4.5 Sub clause 4.5.5 4.5.5.1(Proof pressure test)	-	750	For BIS samples: 1.5 times of BIS testing charges
Clause 4.5 Sub clause 4.5.5 4.5.5.2(Bursting pressure)	-	750	For BIS samples: 1.5 times of BIS testing charges
Clause 4.5 Sub clause 4.5.6(Grip Strength Test)	-	750	For BIS samples: 1.5 times of BIS testing charges
Clause 4.5 Sub clause 4.5.7(Burning Behaviour)	-	750	For BIS samples: 1.5 times of BIS testing charges

17 Jun, 2027

-
Included w.e.f.28-09-2018.

9793

BIS, Central Laboratory (CL)

None

IS 1746 (1992)

Shoe polish, paste - Specification (Third Revision)

Rs 8700/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1.1 (Odour)	-
4.1.2 (Colour)	-
4.1.3 (Consistency)	-
4.1.4 (Applicability)	-
4.1.6 (colour of water extract)	-
4.2 (table 1 S.no(i)) (Softeing point of non-volatile matter)	-
4.2 (table 1 S.no(ii)) (Ash of the non-volatile matter)	-
4.2 (table 1 S.no(iii)) (pH of water extract )	-
4.2 (table 1 S.no(v)) (Flash point of volatile portion,)	-
4.2 (table 1 S.no(vi)) (Non-volatile matter )	-

-
EXCLUDING DISTILLATION RANGE;

9794

BIS, Central Laboratory (CL)

None

IS 513 : Part 2 (2016)

Cold reduced carbon steel sheet and strip: Part 2 high tensile and multi - Phase steel (Sixth Revision)

- View breakup
Rs.6900/- Excluding Tensile Strain Hardening component, Bake bardending index & surface finish test and Rs.1004/- for each of the elements other than carbon, sulphur, phosphorus and manganese.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.0 (CARBON)	-
6.0 (SULPHUR)	-
6.0 (PHOSPHORUS)	-
6.0 (MANGANESE)	-
6.0 (SILICON)	-
6.0 (ALUMINIUM)	-
6.0 (NITROGEN)	-
6.0 (MICRO ALLOYS)	-
Cl 7 (UTM)	-
Cl 8.5 (Workmanship)	-
Cl 8.6 (Workmanship)	-
Cl 9 (Workmanship)	-
Cl 10 (Length, Width & Thickness)	-
Cl. 10 (Out of square)	-
Cl. 10 (Flatness)	-
Cl. 10 (Camber)	-
Cl. 10 (Width)	-
Cl. 10 (Thickness)	-
Cl. 8.5.3 Table 6 (Surface Roughness)	-
Cl. 7.2 Table 7 (Bend Test)	-

-
sample Size 5 pcs of 5x5 cm having dia> 3mm and thickness > 0.8 mm c; EXCLUDING Complete for thickness > 0.8 mm, only C& S can be tested for thickness < 0.8 mm;

9795

BIS, Central Laboratory (CL)

None

IS 4320 (1982)

Specification for thiram, technical

Rs 2700/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.1 (Description)	-
2.2 Table 1 (Loss on drying at 60°C)	-
2.2 Table 1 (Bis ( dimethylthiocarbamoyl ) disulphide)	-
2.2 Table 1 (Ash content)	-

-
-

9796

BIS, Central Laboratory (CL)

None

IS 15500 : Part 1 to 8 (2004)

Deepwell handpumps, components and special tools - Specification

Rs 4500/- + Charges as per relevant material standards View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2/2.3,(Refer 15500(Part 1 to 8)& 5 (Part 1) (Raw material)	-
2/2.3,(Refer 15500(Part 1 to 8)& 9.4 (Part 1) (Dimensions & critical dimensions in conformance with the relevant figures in Part 4.)	-
2/2.3,(Refer fig 4.1 of Part4) & 9.4 (Part 1) (Dimensions of FIG.4.1 HEAD— STANDARD(For SDWP, VLOM-65 and VLOM-50))	-
2/2.3,(Refer fig 4.2 of Part4) (Dimensions of FIG. 4,2 HEAD— EWDP)	-
2/2.3,(Refer fig 4.3A of Part4) (Dimensions of Fig 4.3A Side Plate)	-
2/2.3,(Refer fig 4.3B of Part4) (Dimensions of Fig 4.3B Head Flange)	-
2/2.3,(Refer fig 4.3C of Part4) (Dimensions of Fig 4.3C Back Plate —Standard (For SDWP, VLOM-65 & VLOM-50))	-
2/2.3,(Refer fig 4.3D of Part4) (Dimensions of Fig 4.3D Bracket — Standard (For SDWP, VLOM-65 & VLOM-50))	-
2/2.3,(Refer fig 4.3E of Part4) (Dimensions of Fig 4.3E Back Plate — EDWP)	-
2/2.3,(Refer fig 4.3F of Part4) (Dimensions of Fig 4.3F Bracket — EDWP)	-
2/2.3,(Refer fig 4.3G of Part4) (Dimensions of Fig 4.3G Axle Bust — Right)	-
2/2.3,(Refer fig 4.3H of Part4) (Dimensions of Fig 4.3H Axle Bust — Left)	-
2/2.3,(Refer fig 4.3I of Part4) (Dimensions of Fig 4.3 I Front Top End Plate)	-
2/2.3,(Refer fig 4.3IJof Part4) (Dimensions of 4.3J Front Bottom End Plate)	-
2/2.3,(Refer fig 4.3IKof Part4) (Dimensions of Fig 4.3K Gusset — Standard w (For SDWP, VLOM-65 & VLOM-50))	-
2/2.3,(Refer fig 4.3L Jof Part4) (Dimensions of Fig 4.3L Gusset — EDWP (For EDWP) )	-
2/2.3,(Refer fig 4.4 Jof Part4) (Dimensions of FIG. 4.4 FRONTCOVER)	-
2/2.3,(Refer fig 4.5A of Part4) (Dimensions of FIG. 4.5A Flange for Third Plate)	-
2/2.3,(Refer fig 4.5 B of Part4) (Dimensions of FIG. 4.5B Guide Bush )	-
2/2.3,(Refer fig 4.6 of Part4) (Dimensions of FIG.4.6 HANDLE— STANDARD (For SDWP, VLOM-65 & VLOM-50))	-
2/2.3,(Refer fig 4.7 of Part4) (Dimensions of FIG.4.7 HANDLE— EDWP)	-
2/2.3,(Refer fig 4.8A of Part4) (Dimensions of FIG 4.8A Handle Bar — Standard (For SDWR VLOM-65 & VLOM-50))	-
2/2.3,(Refer fig 4.8B of Part4) (Dimensions of FIG 4.8B Handle Bar — EDWP)	-
2/2.3,(Refer fig 4.8C of Part4) (Dimensions of FIG 4.8C Chain Guide)	-
2/2.3,(Refer fig 4.8 D of Part4) (Dimensions of Fig 4.8D Bearing Housing )	-
2/2.3,(Refer fig 4.9 of Part4) (Dimensions of FIG. 4.9 CHAIN WITH COUPLING)	-
2/2.3,(Refer fig 4.10 of Part4) (Dimensions of FIG. 4.10 T-BAR (For EDWP only))	-
2/2.3,(Refer fig 4.11 of Part4) (Dimensions of FIG; 4.11 COUNTER WEIGHT (For EDWP only))	-
2/2.3,(Refer fig 4.12A of Part4) (Dimensions of Fig 4.1 2A Telescopic Stand — Standard (For borewell with 150 NB casing pipe)(For SDWP, VLOM-65 & VLOM-50))	-
2/2.3,(Refer fig 4.12B of Part4) (Dimensions of Fig 4.12B Normal Stand — Standard (For borewell with 1001125 NB casing pipe) (For SDWP, VLOM-65 & VLOM-50))	-
2/2.3,(Refer fig 4.13A of Part4) (Dimensions of Fig 4.1 3A Telescopic Stand — EDWP (For borewell with 150 NB casing pipe) FOR EDWP )	-
2/2.3,(Refer fig 4.14 A of Part4) (Dimensions of Fig 4.1 4A Stand Pipe — Standard (For SDWP, VLOM-65, VLOM-50))	-
2/2.3,(Refer fig 4.14 B of Part4) (Dimensions of Fig 4.14B Stand Pipe — EDWP (For EDWP))	-
2/2.3,(Refer fig 4.14 C of Part4) (Dimensions of Fig 4.14C Stand Flange)	-
3/3.3.1,(Refer Cl 9.4.1 and 9.4.3 15500(Part 1 ) (Head and Cylinder Assemblies)	-
6.1 of Part 1 ,refer Condition 4 of IS 1573 (Electro-galvanizing )	-
6.2 of Part 1 ,Refer IS 4759 (Galvanizing)	-
6.2.1 of Part 1,Refer Cl 5.9 of IS 2629 (Galvanizing)	-
9.4/9.4.1.1 of part 1 (Dimensional and Other Tests/head assembly )	-
9.4/9.4.1 .2 of part 1 (Head assembly )	-
9.4/9.4.1 .2 of part 1 (handle shall be checked for lateral play at the end of the square section of handle on either side)	-
9.4/9.4.1.2 of part 1 (The clearance between the handle and the bracket )	-
9.4/9.4.1 .2 of part 1 (The stroke of the pump )	-
9.4/9.4.2.1 of part 1 (Handle Assembly)	-
9.4/9.4.2.1 of part 1 (Handle Assembly)	-
9.4/9.4.3of part 1 (Cylinder Assembly )	-
9.4/9.4.3of part 1 (Cylinder Assembly )	-
9.4/9.4.3of part 1 (Cylinder Assembly )	-
9.4/9.4.3of part 1 refer table 3 (Discharge of Pump)	-
9.4/9.4.4of part 1 (Valve Assemblies)	-
2/2.3 ,Refer Fig 3.1 (Dimensions of FIG.4.1 HEAD— STANDARD(For SDWP, VLOM-65 and VLOM-50))	-
2/2.3 ,Refer Fig 3.1 (Dimensions of FIG. 4.4 FRONT COVER)	-
2/2.3 ,Refer Fig 3.1 (Dimensions of FIG. 4.24 HANDLE AXE )	-
2/2.3 ,Refer Fig 3.1 (Dimensions of FIG.4.27 WASHER)	-
2/2.3 ,Refer Fig 3.1 and Refer annex B ( HexagonaI Nut — )	-
2/2.3 ,Refer Fig 3.1 and Refer annex B (Hexagonal Bolt)	-
2/2.3 ,Refer Fig 3.1 and 3.2 (Dimensions of FIG.4.6 HANDLE— STANDARD (For SDWP, VLOM-65 & VLOM-50))	-
2/2.3 ,Refer Fig 3.1 and 3.2 (Dimensions of FIG. 4.9 CHAIN WITH COUPLING)	-
2/2.3 ,Refer Fig 3.1 and 3.2 (Dimensions of FIG. 4.26 BEARING SPACER)	-
2/2.3 ,Refer Fig 3.3 and 3.4 (Prevailing Torque Type Hex. Nut,)	-
2/2.3 ,Refer Fig 3.1 and 3.2,Annex B (Hex. Bolt)	-
2/2.3 ,Refer Fig 3.3 (Dimensions of FIG. 4,2 HEAD— EWDP)	-
2/2.3 ,Refer Fig 3.3 (Dimensions of FIG. 4.4 FRONT COVER)	-
2/2.3 ,Refer Fig 3.3 (Dimensions of FIG. 4.24 HANDLE AXE )	-
2/2.3 ,Refer Fig 3.3 (Dimensions of FIG.4.27 WASHER)	-
2/2.3 ,Refer Fig 3.3 and annex B (Hexagonal Nut—)	-
2/2.3 ,Refer Fig 3.3 and annex B (Hexagonal Bolt)	-
2/2.3 ,Refer Fig 3.3 and 3.4 (Dimensions of FIG.4.7 HANDLE— EDWP)	-
2/2.3 ,Refer Fig 3.3 and 3.4 (Dimensions of FIG. 4.9 CHAIN WITH COUPLING)	-
2/2.3 ,Refer Fig 3.3 and 3.4 (Dimensions of FIG. 4.26 BEARING SPACER)	-
2/2.3 ,Refer Fig 3.3 and 3.4 (Prevailing Torque Type Hex. Nut,)	-
2/2.3 ,Refer Fig 3.3 and 3.4 (Hex. Bolt —)	-
2/2.3 ,Refer Fig 3.3 and 3.4 (Ball bearing, single side shielded)	-
2/2.3 ,Refer Fig 3.5 (Dimensions of FIG. 4.22 PLUNGER ROD — STANDARD (For SDWP))	-
2/2.3 ,Refer Fig 3.5 (Dimensions of FIG. 5.1 CYLINDER BODY— STANDARD (For SDWP))	-
2/2.3 ,Refer Fig 3.5 (Dimensions of FIG. 5.4 REDUCERCAP (For SDWP & EDWP) )	-
2/2.3 ,Refer Fig 3.5 (Dimensions of FIG. 6.1 BRASS LINER)	-
2/2.3 ,Refer Fig 3.5 (Dimensions of FIG. 7.3 SEALINGRING— STANDARD (For SDWP & EDWP))	-
2/2.3 ,Refer Fig 3.5 and 3.6 (Dimensions of FIG. 6.2 PLUNGERYOKE BODY (For SDWP, EDWP & VLOM-65))	-
2/2.3 ,Refer Fig 3.5 and 3.6 (Dimensions of FIG. 6.3 UPPERVALVE (For SDWP, EDWP & VLOM-65))	-
2/2.3 ,Refer Fig 3.5 and 3.6 (Dimensions of FIG. 6.4 BUCKETSPACER— STANDARII (For SDWP, EDWP & VLOM-65))	-
2/2.3 ,Refer Fig 3.5 and 3.6 (Dimensions of FIG. 6.6 FOLLOWER — SDWP )	-
2/2.3 ,Refer Fig 3.5 and 3.6 (Dimensions of FIG. 6.9 CHECK VALVE— STANDARD (For SDWP & EDWP) )	-
2/2.3 ,Refer Fig 3.5 and 3.6 (Dimensions of FIG. 6.11 RUBBERSEATRETAINER (For SDWP & EDWP))	-
2/2.3 ,Refer Fig 3.5 and 3.6 (Dimensions of FIG. 6.12 CHECK VALVE SEAT— STAN~AR~ (For SDWP & EDWP))	-
2/2.3 ,Refer Fig 3.5 and 3.6 (Dimensions of FIG. 7.1 PUMPBUCKET— STANDARD (For SDWP, EDWP & VLOM-65) )	-
2/2.3 ,Refer Fig 3.5 and 3.6 (Dimensions of FIG. 7.6 UPPERVALVE SEATING (For SDWP, EDWP & VLOM-65))	-
2/2.3 ,Refer Fig 3.5 and 3.6 (Dimensions of FIG. 7.7 LOWERVALVE SEATING— STANDARD (For SDWP & EDWP) )	-
2/2.3 ,Refer Fig 3.7 (Dimensions of FIG.4.23 PLUNGERROD — LONG (For EDWP, VLOM-65 & VLOM-50 ))	-
2/2.3 ,Refer Fig 3.7 (Dimensions of FIG. 5.2 CYLINDERBODY— LONG (For EDWP & VLOM-65))	-
2/2.3 ,Refer Fig 3.7 (Dimensions of FIG. 5.5 A Upper CAPS— VLOM-65 (For SDWP & EDWP))	-
2/2.3 ,Refer Fig 3.7 (Dimensions of FIG. 5.5 B Bottomr CAPS— VLOM-65 (For SDWP & EDWP))	-
2/2.3 ,Refer Fig 3.7 (Dimensions of FIG. 6.1 B BRASS LINER)	-
2/2.3 ,Refer Fig 3.7 (Dimensions of FIG. 7.4 SEALING RING— VLOM-65)	-
2/2.3 ,Refer Fig 3.7 and 3.8 (Dimensions of FIG. 6.2 PLUNGERYOKE BODY (For SDWP, EDWP & VLOM-65))	-
2/2.3 ,Refer Fig 3.7 and 3.8 (Dimensions of FIG. 6.3 UPPERVALVE (For SDWP, EDWP & VLOM-65))	-
2/2.3 ,Refer Fig 3.7 and 3.8 (Dimensions of FIG. 6.4 BUCKETSPACER— STANDARII (For SDWP, EDWP & VLOM-65))	-
2/2.3 ,Refer Fig 3.7 and 3.8 (Dimensions of FIG. 6.8 FOLLOWER— VLOM-65)	-
2/2.3 ,Refer Fig 3.7 and 3.8 (Dimensions of FIG. 6.10 CHECKVALVE— VLOM-65)	-
2/2.3 ,Refer Fig 3.7 and 3.8 (Dimensions of FIG. 6.13 CHECK VALVE — VLOM-65)	-
2/2.3 ,Refer Fig 3.7 and 3.8 (Dimensions of FIG. 6.14 CAGE (For VLOM-65))	-
2/2.3 ,Refer Fig 3.7 and 3.8 (Dimensions of FIG. 7.1 PUMPBUCKET— STANDARD (For SDWP, EDWP & VLOM-65) )	-
2/2.3 ,Refer Fig 3.7 and 3.8 (Dimensions of FIG. 7.6 UPPERVALVE SEATING (For SDWP, EDWP & VLOM-65))	-
2/2.3 ,Refer Fig 3.7 and 3.8 (Dimensions of FIG. 7.8 LOWERVALVE SEATING— VLOM-65 68)	-
2/2.3 ,Refer Fig 3.7 and 3.8 (Dimensions of FIG. 7.10 O-RING— VLOM-65)	-
2/2.3 ,Refer Fig 3.7 and 3.8 (Check Nut)	-
2/2.3 ,Refer Fig 3.9 (Dimensions of FIG.4.23 PLUNGERROD — LONG (For EDWP, VLOM-65 & VLOM-50 ))	-
2/2.3 ,Refer Fig 3.9 (Dimensions of FIG. 5.3 CYLINDERBODY— VLOM-50)	-
2/2.3 ,Refer Fig 3.9 (Dimensions ofFIG. 5.6 CYLINDERCAPS— VLOM-50)	-
2/2.3 ,Refer Fig 3.9 (Dimensions of FIG. 6.1 C BRASS LINER)	-
2/2.3 ,Refer Fig 3.9 (Dimensions of FIG. 7.5 SEALINGRING— VLOM-50)	-
2/2.3 ,Refer Fig 3.9 and 3.10 (Dimensions of FIG. 6.15 PLUNGERVALVE BODY— VLOM-50)	-
2/2.3 ,Refer Fig 3.9 and 3.10 (Dimensions of FIG. 6.16 CHECKVALVE BODY— VLOM-50)	-
2/2.3 ,Refer Fig 3.9 and 3.10 (Dimensions of FIG. 7.2 PUMP BUCKET — VLOM-50)	-
2/2.3 ,Refer Fig 3.9 and 3.10 (Dimensions of FIG. 7.9 BOBBIN)	-
2/2.3 ,Refer Fig 3.9 and 3.10 (Dimensions of FIG. 7.11 O-Ring — VLOM-50)	-
2/2.3 ,Refer Fig 3.9 and 3.10 (Hexagonal Nut)	-
2/2.3 ,Refer Fig 3.9 and 3.10 (Hexagonal Bolt)	-
2/2.3 ,Refer Fig 3.11 (Dimensions of FIG.4.23 PLUNGERROD — LONG (For EDWP, VLOM-65 & VLOM-50 ))	-
2/2.3 ,Refer Fig 3.11 (Dimensions of FIG. 5.2 CYLINDERBODY— LONG (For EDWP & VLOM-65))	-
2/2.3 ,Refer Fig 3.11 (Dimensions of FIG. 5.4 REDUCERCAP (For SDWP & EDWP) )	-
2/2.3 ,Refer Fig 3.11 (Dimensions of FIG. 6.1 B BRASS LINER)	-
2/2.3 ,Refer Fig 3.11 (Dimensions of FIG. 7.3 SEALINGRING— STANDARD (For SDWP & EDWP))	-
2/2.3 ,Refer Fig 3.11 and 3.12 (Dimensions of FIG. 6.2 PLUNGERYOKE BODY (For SDWP, EDWP & VLOM-65))	-
2/2.3 ,Refer Fig 3.11 and 3.12 (Dimensions of FIG. 6.3 UPPERVALVE (For SDWP, EDWP & VLOM-65))	-
2/2.3 ,Refer Fig 3.11 and 3.12 (Dimensions of FIG. 6.4 BUCKETSPACER— STANDARII (For SDWP, EDWP & VLOM-65))	-
2/2.3 ,Refer Fig 3.11 and 3.12 (Dimensions of FIG.6.5 BUCKET SPACER — LOWER (For EDWP))	-
2/2.3 ,Refer Fig 3.11 and 3.12 (Dimensions of FIG. 6.7 FOLLOWER— EDWP)	-
2/2.3 ,Refer Fig 3.11 and 3.12 (Dimensions of FIG. 6.9 CHECK VALVE— STANDARD (For SDWP & EDWP) )	-
2/2.3 ,Refer Fig 3.11 and 3.12 (Dimensions of FIG. 6.11 RUBBERSEATRETAINER (For SDWP & EDWP))	-
2/2.3 ,Refer Fig 3.11 and 3.12 (Dimensions of FIG. 6.13 CHECK VALVE — VLOM-65)	-
2/2.3 ,Refer Fig 3.11 and 3.12 (Dimensions of FIG. 7.1 PUMPBUCKET— STANDARD (For SDWP, EDWP & VLOM-65) )	-
2/2.3 ,Refer Fig 3.11 and 3.12 (Dimensions of FIG. 7.6 UPPERVALVE SEATING (For SDWP, EDWP & VLOM-65))	-
2/2.3 ,Refer Fig 3.11 and 3.12 (Dimensions of FIG. 7.7 LOWERVALVE SEATING— STANDARD (For SDWP & EDWP) )	-

-
-

9797

DELHI TEST HOUSE, Azadhpur

8131406

IS 8323 (2018)

Palm oil - Specification (First Revision)

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 5 and sub-clause 5.2(Description)	-	250	-
Clause 5 and sub-clause 5.2(Oil Soluble Colour)	-	500	-
Clause 5 and sub-clause 5.2.1(Clarity of Material)	-	500	-
Clause 5 and sub-clause 5.4(Aflatoxin)	-	1500	-
Clause 5 and sub-clause 5.3(Presence of non-edible oils and adultrants (Karanja Oil, Argemone Oil, Hydrocyanic acid, Mineral Oil, KUSUM OIL AND OTHER OILS CONTAINING CYANOGENIC COMPOUNDS, CASTOR OIL, NEEM OIL))	-	5000	-
Clause 5 and sub-clause 5.5(Metal contaminants)	-	2000	-
Clause 5 and sub-clause 5.5(pesticide residues)	-	1500	-
Clause 5 and sub-clause 5.6(Propyl Gallate)	-	500	-
Clause 5 and sub-clause 5.6(Ascorbyl Esters)	-	500	-
Clause 5 and sub-clause 5.6(BHA)	-	500	-
Clause 5 and sub-clause 5.6(BHT)	-	500	-
Clause 5 and sub-clause 5.6(TBHQ)	-	500	-
Clause 5 and sub-clause 5.7/ Table 1/i(Moisture and insoluble impurities,percent by weight,Max, Refined Grade)	-	750	-
Clause 5 and sub-clause 5.7/ Table 1/i(Moisture and insoluble impurities,percent by weight,Max, Raw Grade)	-	750	-
Clause 5 and sub-clause 5.7/ Table 1/ii(Colour on the Lovibond scale, expressed as (Y + 5R), not deeper than, Refined Grade)	-	500	-
Clause 5 and sub-clause 5.7/ Table 1/ii(Colour on the Lovibond scale, expressed as (Y + 5R), not deeper than, Raw Grade)	-	500	-
Clause 5 and sub-clause 5.7/ Table 1/iii(Refractive index at 40°C, Refined Grade)	-	750	-
Clause 5 and sub-clause 5.7/ Table 1/iii(Refractive index at 40°C, Raw Grade)	-	750	-
Clause 5 and sub-clause 5.7/ Table 1/iv(Specific gravity at 30°C/30°C, Refined Grade)	-	750	-
Clause 5 and sub-clause 5.7/ Table 1/iv(Specific gravity at 30°C/30°C, Raw Grade)	-	750	-
Clause 5 and sub-clause 5.7/ Table 1/v(Saponification value, Refined Grade)	-	750	-
Clause 5 and sub-clause 5.7/ Table 1/v(Saponification value, Raw Grade)	-	750	-
Clause 5 and sub-clause 5.7/ Table 1/vi(Iodine value (Wijs), Refined Grade)	-	750	-
Clause 5 and sub-clause 5.7/ Table 1/vi(Iodine value (Wijs), Raw Grade)	-	750	-
Clause 5 and sub-clause 5.7/ Table 1/vii(Acid value, Max, Refined Grade)	-	500	-
Clause 5 and sub-clause 5.7/ Table 1/vii(Acid value, Max, Raw Grade)	-	500	-
Clause 5 and sub-clause 5.7/ Table 1/viii(Unsaponifiable matter, percent by mass, Max, Refined Grade)	-	750	-
Clause 5 and sub-clause 5.7/ Table 1/viii(Unsaponifiable matter, percent by mass, Max, Raw Grade)	-	750	-
Clause 5 and sub-clause 5.7/ Table 1/ix(Melting point,, Refined Grade)	-	500	-
Clause 5 and sub-clause 5.7/ Table 1/ix(Melting point, Raw Grade)	-	500	-
Clause 5 and sub-clause 5.7/ Table 1/x(Peroxide value, expressed as milliequivalents of oxygen per kg, Max,Refined Grade)	-	500	-
Clause 5 and sub-clause 5.7/ Table 1/x(Peroxide value, expressed as milliequivalents of oxygen per kg, Max, Raw Grade)	-	500	-
Clause 5 and sub-clause 5.7/ Table 1/xi(Flash point (Pensky-Martens), closed, °C, Min, Refined Grade)	-	500	-
Clause 5 and sub-clause 5.7/ Table 1/xi(Flash point (Pensky-Martens), closed, °C, Min, Refined Grade, Raw Grade)	-	500	-
Clause 5 and sub-clause 5.7/ Table 1/xii(Hexane, ppm, Max, Refined Grade)	-	1500	-
Clause 5 and sub-clause 5.7/ Table 1/xii(Hexane, ppm, Max, Raw Grade)	-	1500	-
Clause 5 and sub-clause 5.8.1.3 Table 2/i (Lead, mg/kg, Max)	-	500	-
Clause 5 and sub-clause 5.8.1.3 Table 2/ii(Arsenic, mg/kg, Max)	-	500	-
Clause 5 and sub-clause 5.8.1.3 Table 2/iii(Cadmium, mg/kg, Max)	-	500	-
Clause 5 and sub-clause 5.8.1.3 Table 2/iv(Mercury (total) mg/kg, Max)	-	500	-

17 Jun, 2027

-
Revised version of IS 8323:2018 included w.e.f. 28-7-2021.

9798

DELHI TEST HOUSE, Azadhpur

8131406

IS 4055 (2018)

Maize (Corn) oil - Specification (First Revision)

18350 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 5 and sub-clause 5.2(Description)	-	250	-
Clause 5 and sub-clause 5.2(Peroxide Value)	-	500	-
Clause 5 and sub-clause 5.2(Oil Soluble Colour)	-	500	-
Clause 5 and sub-clause 5.2.1(Clarity of Material)	-	500	-
Clause 5 and sub-clause 5.4(Aflatoxin)	-	1500	-
Clause 5 and sub-clause 5.3(Presence of non-edible oils and adultrants (Karanja Oil, Argemone Oil, Hydrocyanic acid, Mineral Oil, KUSUM OIL AND OTHER OILS CONTAINING CYANOGENIC COMPOUNDS, CASTOR OIL, NEEM OIL))	-	5000	-
Clause 5 and sub-clause 5.5(Metal contaminants)	-	2000	-
Clause 5 and sub-clause 5.5(pesticide residues)	-	2000	-
Clause 5 and sub-clause 5.6(Propyl Gallate)	-	500	-
Clause 5 and sub-clause 5.6(Ascorbyl Esters)	-	500	-
Clause 5 and sub-clause 5.6(BHA)	-	500	-
Clause 5 and sub-clause 5.6(BHT)	-	500	-
Clause 5 and sub-clause 5.6(TBHQ)	-	500	-
Clause 5 and sub-clause 5.7/ Table 1/i(Moisture and insoluble impurities,percent by weight,Max, Refined Grade)	-	500	-
Clause 5 and sub-clause 5.7/ Table 1/i(Moisture and insoluble impurities,percent by weight,Max, Raw Grade)	-	500	-
Clause 5 and sub-clause 5.7/ Table 1/ii(Colour on the Lovibond scale, expressed as (Y + 5R), not deeper than, Refined Grade)	-	500	-
Clause 5 and sub-clause 5.7/ Table 1/ii(Colour on the Lovibond scale, expressed as (Y + 5R), not deeper than, Raw Grade)	-	500	-
Clause 5 and sub-clause 5.7/ Table 1/iii(Refractive index at 40°C, Refined Grade)	-	500	-
Clause 5 and sub-clause 5.7/ Table 1/iii(Refractive index at 40°C, Raw Grade)	-	500	-
Clause 5 and sub-clause 5.7/ Table 1/iv(Specific gravity at 30°C/30°C, Refined Grade)	-	500	-
Clause 5 and sub-clause 5.7/ Table 1/iv(Specific gravity at 30°C/30°C, Raw Grade)	-	500	-
Clause 5 and sub-clause 5.7/ Table 1/v(Saponification value, Refined Grade)	-	750	-
Clause 5 and sub-clause 5.7/ Table 1/v(Saponification value, Raw Grade)	-	750	-
Clause 5 and sub-clause 5.7/ Table 1/vi(Iodine value (Wijs), Refined Grade)	-	750	-
Clause 5 and sub-clause 5.7/ Table 1/vi(Iodine value (Wijs), Raw Grade)	-	750	-
Clause 5 and sub-clause 5.7/ Table 1/vii(Acid value, Max, Refined Grade)	-	500	-
Clause 5 and sub-clause 5.7/ Table 1/vii(Acid value, Max, Raw Grade)	-	500	-
Clause 5 and sub-clause 5.7/ Table 1/viii(Unsaponifiable matter, percent by mass, Max, Refined Grade)	-	750	-
Clause 5 and sub-clause 5.7/ Table 1/viii(Unsaponifiable matter, percent by mass, Max, Raw Grade)	-	750	-
Clause 5 and sub-clause 5.7/ Table 1/ix(Flash point (Pensky-Martens), closed, °C, Min, Refined Grade)	-	500	-
Clause 5 and sub-clause 5.7/ Table 1/ix(Flash point (Pensky-Martens), closed, °C, Min, Refined Grade, Raw Grade)	-	500	-
Clause 5 and sub-clause 5.7/ Table 1/x(Hexane, ppm, Max, Refined Grade)	-	1500	-
Clause 5 and sub-clause 5.7/ Table 1/x(Hexane, ppm, Max, Raw Grade)	-	1500	-
Clause 5 and sub-clause 5.8.1.3 Table 2/i (Lead, mg/kg, Max)	-	400	-
Clause 5 and sub-clause 5.8.1.3 Table 2/ii(Arsenic, mg/kg, Max)	-	400	-
Clause 5 and sub-clause 5.8.1.3 Table 2/iii(Cadmium, mg/kg, Max)	-	400	-
Clause 5 and sub-clause 5.8.1.3 Table 2/iv(Mercury (total) mg/kg, Max)	-	400	-

17 Jun, 2027

-
Revised version of IS 4055:2018 included w.e.f. 28-7-2021.

9799

DELHI TEST HOUSE, Azadhpur

8131406

IS 3491 (2018)

Safflower seed oil - Specification (First Revision)

19100 View breakup
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.19100/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0(TYPES AND GRADES)	-	250	For BIS samples: 1.5 times of BIS testing charges
5.1(Description)	-	250	For BIS samples: 1.5 times of BIS testing charges
5.2(Clarity and adulteration)	-	500	For BIS samples: 1.5 times of BIS testing charges
5.3(Non-edible oils presence)	-	5000	For BIS samples: 1.5 times of BIS testing charges
5.4(aflatoxin)	-	1500	For BIS samples: 1.5 times of BIS testing charges
5.5(Metal contaminants and pesticide residues)	-	4000	For BIS samples: 1.5 times of BIS testing charges
5.6(permitted antioxidants and antioxidant synergists)	-	1500	For BIS samples: 1.5 times of BIS testing charges
5.7, Table 1(Moisture and insoluble impurities)	-	500	For BIS samples: 1.5 times of BIS testing charges
5.7, Table 1(Colour in a 1 inch cell on the Lovibond scale, expressed as (Y + 5R))	-	500	For BIS samples: 1.5 times of BIS testing charges
5.7, Table 1(Refractive index at 40ºC)	-	500	For BIS samples: 1.5 times of BIS testing charges
5.7, Table 1(Specific gravity at 30º/30ºC)	-	500	For BIS samples: 1.5 times of BIS testing charges
5.7, Table 1(Saponification value)	-	750	For BIS samples: 1.5 times of BIS testing charges
5.7, Table 1(Iodine value (Wijs)	-	750	For BIS samples: 1.5 times of BIS testing charges
5.7, Table 1(Bellier turbidity temperature, °C)	-	500	For BIS samples: 1.5 times of BIS testing charges
5.7, Table 1(Acid value)	-	500	For BIS samples: 1.5 times of BIS testing charges
5.7, Table 1(Unsaponifiable matter,)	-	750	For BIS samples: 1.5 times of BIS testing charges
5.7, Table 1(Flash point Pensky-Martens (closed), ºC)	-	500	For BIS samples: 1.5 times of BIS testing charges
5.7, Table 1(Hexane)	-	1500	For BIS samples: 1.5 times of BIS testing charges
5.8.1.3, Table 2(Pb)	-	400	For BIS samples: 1.5 times of BIS testing charges
5.8.1.3, Table 2(As)	-	400	For BIS samples: 1.5 times of BIS testing charges
5.8.1.3, Table 2(Cd)	-	400	For BIS samples: 1.5 times of BIS testing charges
5.8.1.3, Table 2(Hg)	-	400	For BIS samples: 1.5 times of BIS testing charges

17 Jun, 2027

-
Revised version of IS 3491:2018 included w.e.f. 28-7-2021.

9800

DELHI TEST HOUSE, Azadhpur

8131406

IS 547 (2018)

Sesame oil - Specification (Third Revision)

19600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 5 and sub-clause 5.8.1.3 Table 2/iv(Mercury (total) mg/kg, Max)	-	400	-
Clause 5 and sub-clause 5.8.1.3 Table 2/iii(Cadmium, mg/kg, Max)	-	400	-
Clause 5 and sub-clause 5.8.1.3 Table 2/ii(Arsenic, mg/kg, Max)	-	400	-
Clause 5 and sub-clause 5.8.1.3 Table 2/i (Lead, mg/kg, Max)	-	400	-
Clause 5 and sub-clause 5.8/ Table 1/xi(Hexane, ppm, Max, Solvent Extracted - raw grade)	-	1500	-
Clause 5 and sub-clause 5.8/ Table 1/xi(Hexane, ppm, Max, Solvent Extracted - refined grade)	-	1500	-
Clause 5 and sub-clause 5.8/ Table 1/x(Flash point (Pensky-Martens), closed, °C, Min, Solvent Extracted - raw grade)	-	500	-
Clause 5 and sub-clause 5.8/ Table 1/x(Flash point (Pensky-Martens), closed, °C, Min, Solvent Extracted - refined grade)	-	500	-
Clause 5 and sub-clause 5.8/ Table 1/ix(Bellier turbidity temperature, °C, Max, Expressed- raw grade II)	-	500	-
Clause 5 and sub-clause 5.8/ Table 1/ix(Bellier turbidity temperature, °C, Max ,Expressed- Raw grade I)	-	500	-
Clause 5 and sub-clause 5.8/ Table 1/viii(Unsaponifiable matter, percent by mass, Max, Solvent Extracted - raw grade)	-	500	-
Clause 5 and sub-clause 5.8/ Table 1/viii(Unsaponifiable matter, percent by mass, Max, Solvent Extracted - refined grade)	-	500	-
Clause 5 and sub-clause 5.8/ Table 1/viii(Unsaponifiable matter, percent by mass, Max, Expressed- refined grade II)	-	500	-
Clause 5 and sub-clause 5.8/ Table 1/viii(Unsaponifiable matter, percent by mass, Max, Expressed- Raw grade I)	-	500	-
Clause 5 and sub-clause 5.8/ Table 1/viii(Unsaponifiable matter, percent by mass, Max, Expressed- refined grade)	-	500	-
Clause 5 and sub-clause 5.8/ Table 1/vii(Acid value, Max, Solvent Extracted - raw grade)	-	500	-
Clause 5 and sub-clause 5.8/ Table 1/vii(Acid value, Max, Solvent Extracted - refined grade)	-	500	-
Clause 5 and sub-clause 5.8/ Table 1/vii(Acid value, Max, Expressed- refined grade II)	-	500	-
Clause 5 and sub-clause 5.8/ Table 1/vii(Acid value, Max, Expressed- Raw grade I)	-	500	-
Clause 5 and sub-clause 5.8/ Table 1/vii(Acid value, Max, Expressed- refined grade)	-	500	-
Clause 5 and sub-clause 5.8/ Table 1/vi(Iodine value (Wijs))	-	750	-
Clause 5 and sub-clause 5.8/ Table 1/v(Saponification value)	-	750	-
Clause 5 and sub-clause 5.8/ Table 1/iv(Specific gravity at 30°C/30°C)	-	500	-
Clause 5 and sub-clause 5.8/ Table 1/iii(Refractive index at 40°C)	-	500	-
Clause 5 and sub-clause 5.8/ Table 1/ii(Colour on the Lovibond scale, expressed as (Y + 5R), not deeper than ,Solvent Extracted - raw grade)	-	500	-
Clause 5 and sub-clause 5.8/ Table 1/ii(Colour on the Lovibond scale, expressed as (Y + 5R), not deeper than Solvent Extracted - refined grade)	-	500	-
Clause 5 and sub-clause 5.8/ Table 1/ii(Colour on the Lovibond scale, expressed as (Y + 5R), not deeper than Expressed- raw grade II)	-	500	-
Clause 5 and sub-clause 5.8/ Table 1/ii(Colour on the Lovibond scale, expressed as (Y + 5R), not deeper than Expressed- Raw grade I)	-	500	-
Clause 5 and sub-clause 5.8/ Table 1/ii(Colour on the Lovibond scale, expressed as (Y + 5R), not deeper than Expressed- refined grade)	-	500	-
Clause 5 and sub-clause 5.8/ Table 1/i(Moisture and insoluble impurities,percent by weight,Max, Solvent Extracted - raw grade)	-	750	-
Clause 5 and sub-clause 5.8/ Table 1/i(Moisture and insoluble impurities,percent by weight,Max, Solvent Extracted - refined grade)	-	750	-
Clause 5 and sub-clause 5.8/ Table 1/i(Moisture and insoluble impurities,percent by weight,Max, Expressed- Raw grade II)	-	750	-
Clause 5 and sub-clause 5.8/ Table 1/i(Moisture and insoluble impurities,percent by weight,Max Expressed- Raw grade I)	-	750	-
Clause 5 and sub-clause 5.8/ Table 1/i(Moisture and insoluble impurities,percent by weight,Max Expressed- refined grade)	-	750	-
Clause 5 and sub-clause 5.7(TBHQ)	-	500	-
Clause 5 and sub-clause 5.7(BHT)	-	500	-
Clause 5 and sub-clause 5.7(BHA)	-	500	-
Clause 5 and sub-clause 5.7(Ascorbyl Esters)	-	500	-
Clause 5 and sub-clause 5.7(Propyl Gallate)	-	500	-
Clause 5 and sub-clause 5.6(pesticide residues)	-	1500	-
Clause 5 and sub-clause 5.6(Metal contaminants)	-	1600	-
Clause 5 and sub-clause 5.5(Baudouin Test)	-	500	-
Clause 5 and sub-clause 5.3(Presence of non-edible oils and adultrants (Karanja Oil, Argemone Oil, Hydrocyanic acid, Mineral Oil, KUSUM OIL AND OTHER OILS CONTAINING CYANOGENIC COMPOUNDS, CASTOR OIL, NEEM OIL))	-	5000	-
Clause 5 and sub-clause 5.4(Aflatoxin)	-	500	-
Clause 5 and sub-clause 5.2.1(Clarity of Material)	-	500	-
Clause 5 and sub-clause 5.2(Oil Soluble Colour)	-	500	-
Clause 5 and sub-clause 5.2(Peroxide Value)	-	500	-
Clause 5 and sub-clause 5.2(Description)	-	250	-

17 Jun, 2027

-
Revised version of IS 547:2018 included w.e.f. 28-7-2021.

9801

DELHI TEST HOUSE, Azadhpur

8131406

IS 543 (2018)

Cottonseed oil - Specification (Third Revision)

24400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Description)	-	250	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.7 (Table 1, S. no i)(Moisture and insoluble impurities)	-	750	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.7 (Table 1, S. no ii)(Colour on the Lovibond scal)	-	250	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.7 (Table 1, S. no iii)(Refractive index)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.7 (Table 1, S. no iv)(Specific gravity)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.7 (Table 1, S. no v)(Saponification value)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.7 (Table 1, S. no vi)(Iodine value)	-	750	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.7(Table 1, S. no vii)(Acid value)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.7 (Table 1, S. no viii)(Unsaponifiable matter)	-	750	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.7 (Table 1, S. no ix)(Polenske value)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.7 (Table 1, S. no x)(Flash point)	-	300	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.7 (Table 1, S. no xi)(Hexane)	-	1500	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.7 (Table 1, S. no xii)(Refining loss)	-	300	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.8.1.3 (Table 2, S. no i)(Lead)	-	300	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.8.1.3 (Table 2, S. no ii)(Arsenic)	-	300	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.8.1.3 (Table 2, S. no iii)(Cadmium)	-	300	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.8.1.3 (Table 2, S. no iv)(Mercury)	-	300	For BIS samples: 1.5 times of BIS testing charges
Cl. 7(MARKING)	-	250	For BIS samples: 1.5 times of BIS testing charges

17 Jun, 2027

-
Exclusion: Cl 5.8.1.1 & 5.8.1.2 (Optional Requirements for ECO-Mark)

9802

DELHI TEST HOUSE, Azadhpur

8131406

IS 542 (2018)

Coconut oil - Specification (Third Revision)

19600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Description)	-	250	-
Cl. 5.7 (Table 1, S. no i)(Moisture and insoluble impurities)	-	750	-
Cl. 5.7 (Table 1, S. no ii)(Colour on the Lovibond scal)	-	500	-
Cl. 5.7 (Table 1, S. no iii)(Refractive index)	-	500	-
Cl. 5.7 (Table 1, S. no iv)(Specific gravity)	-	500	-
Cl. 5.7 (Table 1, S. no v)(Saponification value)	-	750	-
Cl. 5.7 (Table 1, S. no vi)(Iodine value)	-	600	-
Cl. 5.7(Table 1, S. no vii)(Acid value)	-	500	-
Cl. 5.7 (Table 1, S. no viii)(Unsaponifiable matter)	-	750	-
Cl. 5.7 (Table 1, S. no ix)(Polenske value)	-	500	-
Cl. 5.7 (Table 1, S. no x)(Flash point)	-	500	-
Cl. 5.7 (Table 1, S. no xi)(Hexane)	-	1500	-
Cl. 5.8.1.3 (Table 1, S. no i)(Lead)	-	500	-
Cl. 5.8.1.3 (Table 1, S. no ii)(Arsenic)	-	500	-
Cl. 5.8.1.3 (Table 1, S. no iv)(Mercury)	-	500	-
Cl. 7(MARKING)	-	250	-

17 Jun, 2027

-
Exclusion: Cl 5.8.1.1 & 5.8.1.2 (Optional Requirements for ECO-Mark)

9803

URS PRODUCTS AND TESTING PVT LTD (F3), NOIDA

8136826

IS 16333 : Part 3 (2017)

Mobile phone handsets: Part 3 indian language support for mobile phone handsets - Specific requirements (First Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1(Inputting of text)	-	10000		A) For BIS samples: 1.5 times of BIS testing charges B) For Others : Rs.20,000/- -15% discount to BIS
5.2(Message Readability)	-	10000		A) For BIS samples: 1.5 times of BIS testing charges B) For Others : Rs.20,000/- -15% discount to BIS

31 Dec, 2026

-
-

9804

URS PRODUCTS AND TESTING PVT LTD (F3), NOIDA

8136826

IS 16103 : Part 1 (2012)

Led modules for general lighting: Part 1 safety requirements

35000 View breakup
Rs.35000/-(15% discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	2000	15 % Discount to BIS
8(Terminals)	-	3000	15 % Discount to BIS
9(PROVISION FOR EARTHING)	-	3000	15 % Discount to BIS
10(Protection against accidental contact with live parts)	-	3000	15 % Discount to BIS
11(Mositure Resistance and Insulation)	-	3000	15 % Discount to BIS
12(Electric Strength)	-	3000	15 % Discount to BIS
13(Fault conditions)	-	3000	15 % Discount to BIS
15(Construction)	-	5000	15 % Discount to BIS
16(Creepage distance and clearances)	-	2000	15 % Discount to BIS
17(Screws, current carrying parts and connections)	-	1000	15 % Discount to BIS
18(Resistance to heat, fire and tracking)	-	2000	15 % Discount to BIS
19(Resistance to corrosion)	-	3000	15 % Discount to BIS

31 Dec, 2026

-
-

9805

URS PRODUCTS AND TESTING PVT LTD (F3), NOIDA

8136826

IS 10322 : Part 5 : Sec 9 (2017)

Luminaires: Part 5 particular requirements: Sec 9 rope lights

45000 View breakup
Rs.45000/-(15% discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
21.4(General Test Requireements)	-	1000	15 % Discount to BIS
21.5(Classification of Luminaires')	-	2000	15 % Discount to BIS
21.6(Marking)	-	2000	15 % Discount to BIS
21.7(Construction)	-	5000	15 % Discount to BIS
21.8(Creepage Distance and Clearances)	-	3000	15 % Discount to BIS
21.9(Provision for earthing)	-	3000	15 % Discount to BIS
21.10(Terminals)	-	2000	15 % Discount to BIS
21.11(External & Internal Wiring)	-	2000	15 % Discount to BIS
21.12(Protection against electric shock)	-	3000	15 % Discount to BIS
21.13(Endurance Tests and Thermal Tests)	-	12000	15 % Discount to BIS
21.14(Resistance to Dust & Moisture)	-	2000	15 % Discount to BIS
21.15(Insulation Resistance and Electric Strength)	-	2000	15 % Discount to BIS
21.16(Resistance to Heat , fire and tracking)	-	6000	15 % Discount to BIS

31 Dec, 2026

-
-

9806

URS PRODUCTS AND TESTING PVT LTD (F3), NOIDA

8136826

IS 10322 : Part 5 : Sec 7 (2017)

Luminaires: Part 5 particular requirements: Sec 7 lighting chains (First Revision)

45000 View breakup
Rs.45000/-(15% discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
20.4(General Test Requireements)	-	1500	15 % Discount to BIS
20.5(Classification of Luminaires')	-	1500	15 % Discount to BIS
20.6(Marking)	-	2000	15 % Discount to BIS
20.7(Construction)	-	5000	15 % Discount to BIS
20.8(Creepage Distance and Clearances)	-	2000	15 % Discount to BIS
20.9(Provision for earthing)	-	2000	15 % Discount to BIS
20.10(Terminals)	-	2000	15 % Discount to BIS
20.11(External & Internal Wiring)	-	2000	15 % Discount to BIS
20.12(Protection against electric shock)	-	3000	15 % Discount to BIS
20.13(Endurance Tests and Thermal Tests)	-	12000	15 % Discount to BIS
20.14(Resistance to Dust & Moisture)	-	4000	15 % Discount to BIS
20.15(Insulation Resistance and Electric Strength)	-	2000	15 % Discount to BIS
20.16(Resistance to Heat , fire and tracking)	-	6000	15 % Discount to BIS

31 Dec, 2026

-
-

9807

URS PRODUCTS AND TESTING PVT LTD (F3), NOIDA

8136826

IS 10322 : Part 5 : Sec 6 (2013)

Luminaires: Part 5 particular requirements: Sec 6 handlamps

1000 View breakup
Rs.1000/-(15% discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	1000	ok
5(Classification of Luminaires')	-	1000	OK
6.0(Marking)	-	1000	OK
7.0(Construction)	-	2000	OK
8.0(Creepage Distance and Clearances)	-	2000	OK
9.0(Provision for earthing)	-	2000	OK
10.0(Terminals)	-	2000	OK
11.0(External & Internal Wiring)	-	3000	OK
12.0(Protection against electric shock)	-	3000	OK
13.0(Endurance Tests and Thermal Tests)	-	6000	OK
14.0(Resistance to Dust & Moisture)	-	2000	OK
15.0(Insulation Resistance and Electric Strength)	-	2000	OK
16.0(Resistance to Heat , fire and tracking)	-	3000	OK

31 Dec, 2026

-
-

9808

DELHI TEST HOUSE, Azadhpur

8131406

IS 513 : Part 2 (2016)

Cold reduced carbon steel sheet and strip: Part 2 high tensile and multi - Phase steel (Sixth Revision)

12000 View breakup
For BIS samples: 1.5 times of BIS testing charges, For others

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(CARBON)	-	300	For BIS samples: 1.5 times of BIS testing charges
6.0(SULPHUR)	-	300	For BIS samples: 1.5 times of BIS testing charges
6.0(PHOSPHORUS)	-	300	For BIS samples: 1.5 times of BIS testing charges
6.0(MANGANESE)	-	300	For BIS samples: 1.5 times of BIS testing charges
6.0(SILICON)	-	300	For BIS samples: 1.5 times of BIS testing charges
6.0(NITROGEN)	-	1000	For BIS samples: 1.5 times of BIS testing charges
6.0(MICRO ALLOYS)	-	3200	For BIS samples: 1.5 times of BIS testing charges
6.0(ALUMINIUM)	-	400	For BIS samples: 1.5 times of BIS testing charges
Cl 7(UTM)	-	5150	For BIS samples: 1.5 times of BIS testing charges
Cl 8.5(Workmanship)	-	1000	For BIS samples: 1.5 times of BIS testing charges
Cl 8.6(Workmanship)	-	300	For BIS samples: 1.5 times of BIS testing charges
Cl 9(Workmanship)	-	250	For BIS samples: 1.5 times of BIS testing charges
Cl 10(Length, Width & Thickness)	-	500	For BIS samples: 1.5 times of BIS testing charges

17 Jun, 2027

-
Included w.e.f.28-09-2018.

9809

DELHI TEST HOUSE, Azadhpur

8131406

IS 170 (2020)

Acetone — Specification ( Fifth Revision )

11500 View breakup
Rs.11500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl No 3.1( Description)	-	250	-
Cl No 3.2(Miscibility with Water)	-	1000	-
Cl 3.3 and 6.1 ANNEX A [ Table 1, Sl No. (i) ](Purity)	-	2500	-
Cl 3.3 and 6.1 [ Table 1, Sl No. (ii) ] ref to IS 8768(Colour)	-	500	-
Cl 3.3 and 6.1 [ Table 1, Sl No. (iii) ] ref to 6 of IS 82(Relative density, at 27/27 °C)	-	750	-
Cl 3.3 and 6.1 [ Table 1, Sl No. (iv) ] IS 1448 (Part 18) with the thermometer containing to the requirements given to Annex B(*Distillation range)	-	1000	-
Cl 3.3 and 6.1 [ Table 1, Sl No. (v) ] ref to IS 2362(Water content)	-	500	-
Cl 3.3 and 6.1 [ Table 1, Sl No. (vi) ] ref to 8 of IS 82(Residue on evaporation)	-	1000	-
Cl 3.3 and 6.1 ANNEX C [ Table 1, Sl No. (vii) ](Acidity (as CH3COOH),)	-	1000	-
Cl 3.3 and 6.1 ANNEX D [ Table 1, Sl No. (viii) ](Alkalinity)	-	1000	-
Cl 3.3 and 6.1 ANNEX E [ Table 1, Sl No. (ix) ](Permanganate test)	-	1000	-
Cl 3.3 and 6.1 ANNEX F [ Table 1, Sl No. (x) ](Alcoholic impurities)	-	1000	-
Cl 3.3 and 6.1 ANNEX A [ Table 1, Sl No. (xi) ](Benzene content)	-	2500	-
Cl 3.3 and 6.1 ANNEX A [ Table 1, Sl No. (xii) ](Methanol content)	-	2500	-

17 Jun, 2027

-
Revised version of IS 170:2020 included w.e.f. 28-7-2021.

9810

Envirocare Labs Pvt Ltd, Thane

7120616

IS 14309 (1995)

Blended edible vegetable oils specification

5005 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table-1(Moisture and volatile matter percent by mass, Max type1)	-	260	-
Table-1(Acid value, mx type2)	-	260	-
Table-1(Unsaponifiable matter, percent by mass, MaX type1)	-	357.5	-
Table-1(Flash point, Pen&y-Martens type1)	-	357.5	-

25 May, 2027

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number