BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15122 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

9811

MATERIAL TESTING LABORATORY LLP

8176306

IS 14650 (2023)

UNALLOYED AND ALLOYED STEEL INGOT AND SEMI-FINISHED PRODUCTS FOR RE-ROLLING PURPOSES - SPECIFICATION (First Revision)

All Types

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause - 7.1(SULPHUR)	-	500	-
Clause - 7.1(PHOSPHURS)	-	500	-
Clause - 7.1(MANGANESE)	-	500	-
Clause - 7.1(NITROGEN)	-	500	-
Clause - 7.1(CARBON)	-	500	-
Clause - 7.1(SULPHUR)	-	500	-
Clause - 7.1(PHOSPHURS)	-	500	-
Clause - 7.1(MANGANESE)	-	500	-
Clause - 7.1(NITROGEN)	-	500	-
Clause - 7.1(CARBON)	-	500	-
Clause.7.1(Silicon)	-	500	-
Clause.7.1(Carbon Equbalant)	-	1500	-
Clause.7.1(Microalloy element)	-	1500	-
Clause.6.0(Manufacture)	-	0	-
As per Clause 10(Dimension)	-	100	-
As per Clause 10.1(Dimension Width)	-	100	-
As per Clause 10.1(Dimension Thickness)	-	100	-
As per Clause 10.2(Dimension Length)	-	100	-
As per Clause 11/11.1/11.2/11.3/11.4(Tolerances)	-	100	-
As per Clause 11.5(Bend)	-	250	-
As per Clause 11.6(Camber)	-	250	-
As per Clause 11.7 (i)(Out of Square)	-	100	-
As per Clause 11.7 (ii)(Round Corners)	-	100	-
As per Clause 11.7 (iii)(Ridges due to gas cutting)	-	100	-
As per Clause 11.7 (iv)(Taper (Width variation on top and bottom surface at one location)	-	100	-
As per Clause 11.7 (v)(Edge slanting (Width variation on top and bottom surface at one location)	-	100	-
As per Clause 11.7 (vi)(Convexity(Difference in thickness from edge to curve)	-	200	-
As per Clause 11.7 (vii)(Chamfering (Length variation on top and bottom surface at one location)	-	100	-
As per Clause 11.7 (viii)(Wedge (Thickness variation at the edges along the cross section)	-	100	-
As per Clause 11.7 (ix)(Scarfing pits)	-	100	-
As per Clause 12/12.1/12.2/12.3(Freedom from defects)	-	500	-
Clause. 13(Macro examination test.)	-	3500	-
Clause. 13(Macro examination test.)	-	3500	-
Clause. 13(Sulphur print.)	-	3500	-
Clause. 13(Inclusion content)	-	3000	-
Clause. 14(Marking)	-	250	-
Clause.15(Ordering information)	-	250	-

-
Included w.e.f. 28.08.2024

9812

Indian Institute of Packaging (IIP), Delhi

8177901

IS 3575 (1993)

Bitumen drums - Specification (Third Revision)

10700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Dimensions Drums (Figure 1))	-	550	-
4.1(Dimensions Drums (Figure 1))	-	550	-
4.1(Dimensions Drums (Figure 1))	-	550	-
4.1(Dimensions Drums (Figure 1))	-	550	-
4.1(Dimensions Drums (Figure 1))	-	550	-
4.1(Dimensions Closure (Figure 2))	-	550	-
4.1(Dimensions Closure (Figure 2))	-	550	-
4.1(Dimensions Closure (Figure 2))	-	550	-
4.1(Dimensions Closure (Figure 2))	-	550	-
5.1(Body and ends)	-	550	-
5.2(Closures)	-	550	-
6.1(Construction)	-	550	-
6.2(Construction)	-	550	-
6.3(Construction)	-	550	-
6.4(Construction)	-	550	-
6.5(Closure)	-	550	-
7.1(Finish)	-	550	-
7.2(Finish)	-	550	-
8(Air Pressure Test)	-	800	-

-
-

9813

Hi Physix Laboratory India Private Limited, Pune

7126926

IS 302 : Part 2 : Sec 7 (2024)

Safety of Household And Similar Electrical Appliances Part 2 Particular Requirements Section 7: Domestic Electric Clothes Washing Machines

130000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(GENERAL REQUIREMENT)	-	0	-
6(CLASSIFICATION)	-	0	-
7(MARKING AND INSTRUCTIONS)	-	1000	-
8(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	2000	-
10(POWER INPUT AND CURRENT)	-	5000	-
11(HEATING)	-	5000	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	3000	-
14(TRANSIENT OVERVOLTAGES)	-	2000	-
15(MOISTURE RESISTANCE)	-	6000	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	3000	-
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	2000	-
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	0	-
18(ENDURANCE)	-	10000	-
19(ABNORMAL OPERATION)	-	5000	-
19.11.4.1(Electrostatic discharges)	-	5000	-
19.11.4.2(Radiated fields)	-	20000	-
19.11.4.3(Fast transient bursts)	-	5000	-
19.11.4.4(Surge immunity test)	-	5000	-
19.11.4.5(Immunity to conducted discharges)	-	10000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	5000	-
19.11.4.7(Harmonics)	-	5000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	1000	-
21(MECHANICAL STRENGTH)	-	5000	-
22(CONSTRUCTION)	-	5000	-
23(INTERNAL WIRING)	-	1000	-
24(COMPONENTS)	-	5000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	2000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	2000	-
27(PROVISION FOR EARTHING)	-	2000	-
28(SCREWS AND CONNECTIONS)	-	1000	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	2000	-
30(RESISTANCE TO HEAT AND FIRE)	-	3000	-
31(RESISTANCE TO RUSTING)	-	2000	-
4(GENERAL REQUIREMENT)	-	0	-
6(CLASSIFICATION)	-	0	-
7(MARKING AND INSTRUCTIONS)	-	0	-
8(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	0	-
10(POWER INPUT AND CURRENT)	-	0	-
11(HEATING)	-	0	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	0	-
14(TRANSIENT OVERVOLTAGES)	-	0	-
15(MOISTURE RESISTANCE)	-	0	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	0	-
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	0	-
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	0	-
18(ENDURANCE)	-	0	-
19(ABNORMAL OPERATION)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
20(STABILITY AND MECHANICAL HAZARDS)	-	0	-
21(MECHANICAL STRENGTH)	-	0	-
22(CONSTRUCTION)	-	0	-
23(INTERNAL WIRING)	-	0	-
24(COMPONENTS)	-	0	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	0	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
27(PROVISION FOR EARTHING)	-	0	-
28(SCREWS AND CONNECTIONS)	-	0	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	0	-
30(RESISTANCE TO HEAT AND FIRE)	-	0	-
31(RESISTANCE TO RUSTING)	-	0	-
4(GENERAL REQUIREMENT)	-	0	-
6(CLASSIFICATION)	-	0	-
7(MARKING AND INSTRUCTIONS)	-	0	-
8(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	0	-
10(POWER INPUT AND CURRENT)	-	0	-
11(HEATING)	-	0	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	0	-
14(TRANSIENT OVERVOLTAGES)	-	0	-
15(MOISTURE RESISTANCE)	-	0	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	0	-
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	0	-
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	0	-
18(ENDURANCE)	-	0	-
19(ABNORMAL OPERATION)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
20(STABILITY AND MECHANICAL HAZARDS)	-	0	-
21(MECHANICAL STRENGTH)	-	0	-
22(CONSTRUCTION)	-	0	-
23(INTERNAL WIRING)	-	0	-
24(COMPONENTS)	-	0	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	0	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
27(PROVISION FOR EARTHING)	-	0	-
28(SCREWS AND CONNECTIONS)	-	0	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	0	-
30(RESISTANCE TO HEAT AND FIRE)	-	0	-
31(RESISTANCE TO RUSTING)	-	0	-
19.13(ABNORMAL OPERATION)	-	0	-
19.101(Abnormal Operation)	-	0	-
19.102(Abnormal Operation)	-	0	-

20 Jun, 2028

-
Included w.e.f. 03.05.2024 Exclusion: CL.24 (COMPONENTS)

9814

Aaditech Test and Calibration Lab LLP

8179926

IS 2082 (2018)

Stationary storage type electric water heaters - Specification (Fifth Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
6(Classification )	-	0	-
6(Classification )	-	0	-
(Cl.8 of IS 302-2-21:2011)(Protection Against Access to Live Parts)	-	1000	-
(Cl.10 of IS 302-2-21: 2011)(Power Input & Current)	-	1500	-
(Cl.11 of 302-2-21:2011)(Heating)	-	1000	-
(Cl.11 of 302-2-21:2011)(Heating)	-	1000	-
(Cl.11 of 302-2-21:2011)(Heating)	-	1000	-
(Cl.13 of IS 302-2-21:2011)(Leakage Current )	-	1000	-
(Cl.13 of IS 302-2-21:2011)(Electrical Strength at Operating Temperature)	-	1000	-
(Cl.14ofIS302-2-21:2011)(Transient Over Voltages)	-	1000	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	1500	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	1500	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	1500	-
(Cl.17 of IS 302-2-21:2011)(Overload protection of transformers & associated circuits)	-	1000	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	1000	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	1000	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	1000	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	1000	-
(Cl.20 of IS 302-2-21:2011)(Stability & Mechanical Hazards)	-	1000	-
(Cl.21ofIS302-2-21:2011)(Mechanical strength)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl.24ofIS302-221:2011)(Component)	-	1000	-
(Cl.24ofIS302-221:2011)(Component)	-	1000	-
(Cl.24ofIS302-221:2011)(Component)	-	1000	-
(Cl.24ofIS302-221:2011)(Component)	-	1000	-
(Cl.24ofIS302-221:2011)(Component)	-	1000	-
(Cl.24ofIS302-221:2011)(Component)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	1000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	1000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	1000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	1000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	1000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	1000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	1000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	1000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	1000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	1000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	1000	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	1000	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	1000	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	1000	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	1000	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	1000	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	1000	-
(Cl.28 of IS 302-2-21:2011)(Screws & Connections)	-	1000	-
(Cl.29ofIS302-2-21:2011)(Clearances, Creepage Distances and Solid Insulation)	-	500	-
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	1500	-
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	1500	-
(Cl.31 of IS 302-2-21:2011)(Resistance to Rusting)	-	1000	-
(Cl.15 of IS 2082:2018)(Verification of the Rated Capacity)	-	500	-
(Cl.16 of IS 2082:2018)(Standing Loss per 24 Hours)	-	1500	-
(Cl.17 of IS 2082:2018)(Hot Water Output)	-	1500	-
(Cl.18 of IS 2082:2018)( Reheating Time)	-	1500	-
(Cl.20 of IS 2082:2018)(Deviation of Dial Calibration)	-	1500	-
(Cl.21 of IS 2082:2018)(Cyclic Temperature Variation)	-	1500	-
(Cl.22 of IS 2082:2018)(Finish)	-	500	-
Cl.22 of IS 2082:2018(Finish)	-	500	-
Cl.21 of IS 2082:2018(Cyclic Temperature Variation)	-	1500	-
Cl.20 of IS 2082:2018(Deviation of Dial Calibration)	-	1500	-
Cl.19 of IS 2082:2018(Mixing Factor)	-	1500	-
Cl.18 of IS 2082:2018( Reheating Time)	-	1500	-
Cl.17 of IS 2082:2018(Hot Water Output)	-	1500	-
Cl.16 of IS 2082:2018(Standing Loss per 24 Hours)	-	1500	-
Cl.15 of IS 2082:2018(Verification of the Rated Capacity)	-	500	-
Cl.31 of IS 302-2-21:2018(Resistance to Rusting)	-	1000	-
Cl.30.2 of IS 302-1:2008(Resistance to Heat & Fire : Glow wire test )	-	1000	-
Cl.30.1 of IS 302-1:2008(Resistance to Heat & Fire : Ball pressure test )	-	1000	-
Cl.29.2 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Creepage distance )	-	500	-
Cl.29.1 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Clearance distance )	-	500	-
Cl.28 of IS 302-2-21:2018(Screws & Connections)	-	1000	-
Cl.27.5 of IS 302-1:2008(Provision for Earthing : ECR )	-	1000	-
Cl.27 of IS 302-2-21:2018(Provision for Earthing)	-	1000	-
Cl.26 of IS 302-2-21: 2018(Terminals for External Conductors)	-	1000	-
Cl.25.18 of IS 302-1:2008(Supply Connection & External Flexible Cords)	-	1000	-
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test - displacement )	-	1000	-
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test )	-	1000	-
Cl.25.12 of IS 302-1:2008(Supply Connection & External Flexible Cords : Moulding of supply cord )	-	1000	-
Cl.25.10 of IS 302-1:2008(Supply Connection & External Flexible Cords : Colour of Earthing conductor )	-	1000	-
Cl.25.8 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : Resistance of supply cord )	-	1000	-
Cl.25.5 of IS 302-1:2008(Supply Connection & External Flexible Cords : Type of attachment )	-	1000	-
Cl.25 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : connection to the supply mains)	-	1000	-
Cl.24.102 of IS 302-221:2018(Component : Operation of thermal cut-out )	-	1000	-
Cl.24.101 of IS302-221:2018(Component : Location of non self reseting thermal cut out )	-	1000	-
Cl.24of IS 302-221:2018(Component : Relevent Indian standards )	-	1000	-
Cl. 23 of IS 302-1:2008(Internal Wiring : color identification for earthing conductor )	-	1000	-
Cl. 23 of IS 302-1:2008(Internal Wiring )	-	1000	-
Cl.22.111 of IS 302-2-21:2018(Construction : Resistance to vacuum )	-	1000	-
Cl.22.110 of IS 302-2-21:2018(Construction : meterial of connections )	-	1000	-
Cl.22.110 of IS 302-2-21:2018(Construction : Material of Inner conatiner )	-	1000	-
Cl.22.109 of IS 302-2-21:2018(Construction : Drain for appliance having a capacity of more than 15 liter)	-	1000	-
Cl.22.108 of IS 302-2-21:2018(Construction : fixing to wall )	-	1000	-
Cl.22.107 of IS 302-2-21:2018(Construction : Position of Heating elements and thermal control sensor)	-	1000	-
Cl.22.106 of IS 302-2-21:2018(Construction : Operation of thermal cut- out )	-	1000	-
Cl.22.104 of IS 302-2-21:2018(Construction : Outlet of open outlet heater )	-	1000	-
Cl.22.103 of IS 302-2-21:2018(Construction : Operation of Pressure relieve devices )	-	1000	-
Cl.22.102 of IS 302-2-21:2018(Construction : repeated drawing of water temp )	-	1000	-
Cl.22.101 of IS 302-2-21:2018(Construction : rated pressure of closed water heater )	-	1000	-
Cl.22.47 of IS 302-2-21:2018 (Construction : Water pressure test )	-	1000	-
Cl.22.44 of IS 302-1:2008(Construction : Shape and decoration of enclosure)	-	1000	-
Cl.22.34, Cl 22.35 of IS 302-1:2008(Construction : Shaft of operating Knobs )	-	1000	-
Cl.22.33 of IS 302-1:2008(Construction : Direct contact of liquids )	-	1000	-
Cl 22.26 ,Cl.22.28, Cl 22.29, Cl 22.30 , Cl 22.31, Cl 22.32 of IS 302-1:2008(Construction : Supplymentry/ double / reinforced insulation for Class II/ Class III appliance )	-	1000	-
Cl.22.18 Of IS 302-1:2008(Construction : Resistance to corrosion )	-	1000	-
Cl.22.17 of IS 302-1:2008(Construction : Spacers )	-	1000	-
Cl.22.14 of IS 302-1:2008(Construction : ragged or sharp edges)	-	1000	-
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knob, grips, levers and similar parts)	-	1000	-
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable part )	-	1000	-
Cl.22.7 of IS 302-1:2008(Construction: adequate safeguards against the risk of excessive pressure)	-	1000	-
Cl.22.6 of IS 302-2-21:2018(Construction : Size of drain hole )	-	1000	-
Cl.22.6 of IS 302-1:2008(Construction : Effect of water on 3 insulation )	-	1000	-
Cl.22.2 of IS 302-1:2008(Construction : Provision to ensure all pole disconnection )	-	1000	-
Cl.22.1 of IS 302-1:2008(Construction : IP test )	-	1000	-
Cl.21.2 of IS 302-1:2008(Mechanical strength : prevent penetration by sharp implements. )	-	1000	-
Cl.21.1 of IS 302-1:2008(Mechanical strength : Rough handling in normal use)	-	1000	-
Cl.20 of IS 302-1:2008(Stability & Mechanical Hazards)	-	1000	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : leakage from container during test)	-	1000	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : High Voltage )	-	1000	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Insulation of the supply cable or cord)	-	1000	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Wall ceiling temp. of test corner )	-	1000	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : emission of flame or molten metal or poisonous or ignitable gas )	-	1000	-
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Electric Strentgh )	-	1500	-
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Leakage current )	-	1500	-
Cl.15 of IS 302-2-21-2018(Moisture Resistance)	-	1000	-
Cl.14 of IS 302-2-21:2018(Transient Over Voltages)	-	1000	-
Cl.13 of IS 302-2-21:2018(3 Strength at Operating Temperature)	-	1000	-
Cl.13 of IS 302-2-21:2018(Leakage Current )	-	1000	-
Cl.11 of 302-2-21:2018(Heating : Room Temp.)	-	1000	-
Cl.11 of 302-2-21:2018(Heating : Temp of Rubber or PVC insulation of internal and external wiring)	-	1000	-
Cl.11 of 302-2-21:2018(Heating : Temp of Walls, ceilings and floor of the test corner )	-	1000	-
Cl.10 of IS 302-2-21: 2018(Power Input & Current)	-	1500	-
Cl.8 of IS 302-2-21:2018(Protection Against Access to Live Parts)	-	1000	-
7.101(Marking : Indifiction of water inlet and water outlet )	-	500	-
7.14(Marking : Legibility and durability)	-	500	-
7.13(Marking : Official language of Instruction )	-	500	-
7.11(Marking : Indication of controls )	-	500	-
7.8(Marking : Terminals )	-	500	-
7.6(Marking : Symbol used )	-	500	-
7.1(Marking : Warning for Open- outlet )	-	500	-
7.1(Marking : Statement for pressure reducing valve ( For rated pressure less than 0.6 MPa))	-	500	-
7.1(Marking : Statement for a pressure-relief device)	-	500	-
7.1(Marking : Rated capacity)	-	500	-
7.1(Marking : Rated pressure)	-	500	-
7.1(Marking : Country of manufacture)	-	500	-
7.1(Marking: IP Number)	-	500	-
7.1(Marking: Symbol for Class II)	-	500	-
7.1(Marking: Model or type reference)	-	500	-
7.1(Marking: Name, trademark or identification mark of manufacturer )	-	500	-
7.1(Marking : Rated power input)	-	500	-
7.1(Marking : Symbol for nature of supply )	-	500	-
7.1(Marking : Rated Voltage )	-	500	-
Cl.32 of IS 302-1:2008()	-	500	-
4(GENERAL REQUIREMENT)	-	0	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	0	-
12(THERMOSTAT SETTING)	-	1000	-
Cl-10(Mounting of the water heater)	-	1000	-
Cl-11(Measurements of stored water temperature)	-	1000	-
Cl-12(Thermostat setting)	-	1000	-
Cl-13(Measurement of energy consumption)	-	1000	-
Cl-14(Verification of the rated capacity)	-	500	-
(Cl.19 of IS 2082:2018)(Mixing Factor)	-	1000	-

-
-

9815

Bharat Test House Pvt Ltd 1474 Sonipat Haryana

9135626

IS 17505 : Part 1 (2021)

Specification for Thermosetting Insulated Fire Survival Cables for Fixed Installation having Low Emission of Smoke and Corrosive Gases when Affected by Fire for Working Voltages upto and including 1100 Vac and 1500 Vdc

Thermosetting Insulated Fire Survival Cables

136000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	3500	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	1000	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	1000	-
IS 191:2007 & IS 440(Copper purity test)	-	1000	-
Cl. 11,14,16, Table 4 and Table 6 of IS 17505 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	500	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 36)-1984(Diameter of armour Wire)	-	500	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 37)-1984(Tensile strength and elongation at break)	-	3000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 38)-1984(Torsion Test on galvanised steel wire for armouring)	-	750	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 39)-1984(Winding Test for Formed Wires)	-	500	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 40)-1984(Uniformity of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	750	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 41)-1984(Mass of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	500	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 42)-1984(Resistivity test)	-	750	-
Table 1 and Table 2 of IS 17505 -1: 2021, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	500	-
Cl 18.2 of IS 17505-1:2021 & IS:10810 (Part 45)-1984(High voltage test)	-	5000	-
Table 1 of IS 17505-1 :2021 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	3500	-
Cl. 18.6 of IS 17505-1:2021 & IS:10810 (Part 58)-1998(Oxygen index)	-	6000	-
Cl. 18.7 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	4000	-
Table-1 & Table-2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	12500	-
Specification for thermosetting insulated fire survival cables for fixed installation having low emission of smoke and corrosive gases when affected by fire for working voltages upto and including 1100 V A.C. and 1500 V D.C(Hot deformation)	-	500	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	500	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	500	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	500	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	500	-
Table 1 of IS 17505-1: 2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	1000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 30)-1984(Hot set test)	-	1000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone Resistance test)	-	7500	-
Cl 18.5.1 of IS 17505-1 :2021 & IS:10810 (Part 61)-1988(Flame test on single cable)	-	3000	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	500	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	500	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	500	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	500	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	500	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 7)-1984(Tensile strength and elongation at break.)	-	3000	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	12500	-
Cl 18.6 of IS 17505-1: 2021 & IS:10810 (Part 58)-1998(Oxygen Index.)	-	6000	-
Cl 18.8 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	4000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone resistance test)	-	1000	-
Table 2 of IS 17505-1:2021 & IS:10810 (Part 15)-1984(Hot deformation)	-	5000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	500	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	500	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	500	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	500	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	500	-
Cl 18.2of IS 17505-1:2021 & IS:10810 (Part 45)-1984.(High Voltage test.)	-	5000	-
Cl 18.5of IS 17505-1:2021 & IS:10810 (Part 53)-1984(Flammability Test)	-	17500	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 20)-1984(Cold bend test)	-	1000	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	1000	-
Cl 18.5 of IS 17505-1:2021 & IS:10810 (Part 61)-1988(Flammability Test)	-	17500	-
Cl 18.9 of IS 17505-1:2021(Water immersion test ( effect of water on sheath of cable))	-	3000	-
Cl 18.8 of IS 17505-1:2021& IS:10810 (Part 63)-1993(Smoke density test)	-	11000	-
Cl. 3.5, 18.4 & Annex-E of IS 17505-1:2021(Circuit integrity test under fire)	-	500	-
Cl. 17.1 Table 9 (iv) e(Heat Shock)	-	1000	-
Cl. 17.1 Table 9 (iv) h(Water absorption (Gravimetric))	-	7500	-
Cl. 17.1 Table 9 (vii) b(Flame test on bunched cable)	-	17500	-
Cl. 17.1 Table 9 (ix)(Abrasion resistance test)	-	3500	-

19 Mar, 2029

-
-

9816

Bharat Test House Pvt Ltd 1474 Sonipat Haryana

9135626

IS 17293 (2020)

Electric Cables for Photovoltaic Systems for Rated Voltage 1 500 V d.c.

Electric cables for photovoltaic system

1055000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	1500	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	2500	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	2500	-
Annex G and Table 3 of IS 17293:2020(Ozone Resistance test)	-	14500	-
IS 191 : 2007, IS 440(Copper purity test)	-	5000	-
Table 3 of IS 17293:2020 & IS 10810 (Part 63)(Smoke density test.)	-	10000	-
Cl 6.4.3 and Table 3 of IS 8130(Diameter of wire in conductor)	-	1500	-
Table-3 & Annex-F of IS 17293:2020 and IS 10810 (Part 7) 1984(Elongation at low temperature (Cold Elongation))	-	12500	-
Annex H and Table 3 of IS 17293:2020(Damp Heat test)	-	125000	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	2500	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	12500	-
Cl 11.2.3 & Table-3 of IS 17293:2020 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	12500	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	12500	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	2000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(IS 17293)	-	32500	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	32500	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	32500	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(IS 10810-30)	-	500	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	350000	-
Annex D and Table 3 of IS 17293:2020(Dynamic Penetration test)	-	17500	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	3500	-
Annex C of IS 17293:2020 & IS:10810 (Part 21)-1984(Cold impact test)	-	7500	-
Annex - B of IS 17293:2020(Compatibility test)	-	500	-
Table 3 of IS 17293:2020 & IS:10810 (Part 20)-1984(Cold bend test)	-	7500	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	2500	-
Cl 5.3 of IS 17048:2018 & IS:10810 (Part 53)-1984(Flammability Test)	-	12500	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	12500	-
Cl 11.2.1 of IS 17293:2020 & IS:10810 (Part 45)-1984(High voltage test)	-	7500	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	17500	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	12500	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	32500	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Conductivity)	-	32500	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	32500	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	32500	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(Hot set test)	-	7500	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	350000	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	2500	-
Annex - B of IS 17293:2020(Compatibility test)	-	2500	-
Table 3 of IS 17293:2020 & IS:10810 (Part 12)-1984(Shrinkage test)	-	7500	-
Annex - E of IS 17293 : 2020(UV resistance)	-	95000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(pH)	-	2000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Conductivity)	-	2500	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(HCl and HBr)	-	17500	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	17500	-
11.2.2(Spark Test)	-	2500	-
11.2.4(Long-term Resistance of Insulation to d.c.)	-	25000	-
11.2.5(Surface Resistance of Sheath)	-	2500	-
11.3.1(Sheath Colour)	-	500	-
11.3.2(Sheath Marking)	-	750	-
11.3.3(Overall Diameters and Ovality)	-	1500	-
Annex J(Assessment of Halogens)	-	32500	-
5.1, 6.1, Table 11, 1.1(Properties before ageing b)	-	2500	-
5.1, 6.1, Table 11, 1.2(Properties after ageing in oven)	-	7500	-
5.1, 6.1, Table 11, 1.3(Hot set test b)	-	7500	-
5.1, 6.1, Table 11, 1.4(Thermal endurance Test conditions b)	-	350000	-
5.1, 6.1, Table 11, 1.5(Bending at low temperature)	-	12500	-
5.1, 6.1, Table 11, 1.6(Elongation at low temperature Insulated conductor/cable overall diameter)	-	12500	-
5.1, 6.1, Table 11, 1.7(Sheath resistance against acid and alkaline solution)	-	2500	-
5.1, 6.1, Table 11, 1.8(Compatibility test)	-	2500	-
5.2(Application to the Conductor)	-	500	-
5.3(Thickness)	-	1500	-
6.2(Sheath application)	-	500	-
6.3(Sheath Thickness)	-	1500	-
6.4(Sheath Colour)	-	500	-
7(Overall Dimension)	-	1500	-
8.1(Continuity of Marking)	-	750	-
8.2(Durability)	-	500	-
8.3(Legibility)	-	500	-
9(Core Identification)	-	500	-
12(Packing and Marking)	-	750	-
4.1(Resistance)	-	500	-
7.1.2.1, 7.2.3(Annealing)	-	2500	-
Table 3, (IS 10810 Part 53)(Test for vertical flame propagation on complete cable)	-	12500	-
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	0	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	0	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	0	-
Annex G and Table 3 of IS 17293:2020(Ozone Resistance test)	-	0	-
IS 191 : 2007, IS 440(Copper purity test)	-	0	-
Table 3 of IS 17293:2020 & IS 10810 (Part 63)(Smoke density test.)	-	0	-
Cl 6.4.3 and Table 3 of IS 8130(Diameter of wire in conductor)	-	0	-
Table-3 & Annex-F of IS 17293:2020 and IS 10810 (Part 7) 1984(Elongation at low temperature (Cold Elongation))	-	0	-
Annex H and Table 3 of IS 17293:2020(Damp Heat test)	-	0	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	0	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	0	-
Cl 11.2.3 & Table-3 of IS 17293:2020 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(IS 17293)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(IS 10810-30)	-	0	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	0	-
Annex D and Table 3 of IS 17293:2020(Dynamic Penetration test)	-	0	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	0	-
Annex C of IS 17293:2020 & IS:10810 (Part 21)-1984(Cold impact test)	-	0	-
Annex - B of IS 17293:2020(Compatibility test)	-	0	-
Table 3 of IS 17293:2020 & IS:10810 (Part 20)-1984(Cold bend test)	-	0	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	0	-
Cl 5.3 of IS 17048:2018 & IS:10810 (Part 53)-1984(Flammability Test)	-	0	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	0	-
Cl 11.2.1 of IS 17293:2020 & IS:10810 (Part 45)-1984(High voltage test)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Conductivity)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(Hot set test)	-	0	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	0	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	0	-
Annex - B of IS 17293:2020(Compatibility test)	-	0	-
Table 3 of IS 17293:2020 & IS:10810 (Part 12)-1984(Shrinkage test)	-	0	-
Annex - E of IS 17293 : 2020(UV resistance)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(pH)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Conductivity)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(HCl and HBr)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	0	-
11.2.2(Spark Test)	-	0	-
11.2.4(Long-term Resistance of Insulation to d.c.)	-	0	-
11.2.5(Surface Resistance of Sheath)	-	0	-
11.3.1(Sheath Colour)	-	0	-
11.3.2(Sheath Marking)	-	0	-
11.3.3(Overall Diameters and Ovality)	-	0	-
Annex J(Assessment of Halogens)	-	0	-
5.1, 6.1, Table 11, 1.1(Properties before ageing b)	-	0	-
5.1, 6.1, Table 11, 1.2(Properties after ageing in oven)	-	0	-
5.1, 6.1, Table 11, 1.3(Hot set test b)	-	0	-
5.1, 6.1, Table 11, 1.4(Thermal endurance Test conditions b)	-	0	-
5.1, 6.1, Table 11, 1.5(Bending at low temperature)	-	0	-
5.1, 6.1, Table 11, 1.6(Elongation at low temperature Insulated conductor/cable overall diameter)	-	0	-
5.1, 6.1, Table 11, 1.7(Sheath resistance against acid and alkaline solution)	-	0	-
5.1, 6.1, Table 11, 1.8(Compatibility test)	-	0	-
5.2(Application to the Conductor)	-	0	-
5.3(Thickness)	-	0	-
6.2(Sheath application)	-	0	-
6.3(Sheath Thickness)	-	0	-
6.4(Sheath Colour)	-	0	-
7(Overall Dimension)	-	0	-
8.1(Continuity of Marking)	-	0	-
8.2(Durability)	-	0	-
8.3(Legibility)	-	0	-
9(Core Identification)	-	0	-
12(Packing and Marking)	-	0	-
4.1(Resistance)	-	0	-
7.1.2.1, 7.2.3(Annealing)	-	0	-
Table 3, (IS 10810 Part 53)(Test for vertical flame propagation on complete cable)	-	0	-

19 Mar, 2029

-
-

9817

CEPT Advisory Foundation

7186736

IS 1391 : Part 2 (2023)

Room Air Conditioners Specification Part 2 Split Air Conditioners Fourth Revision

100000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.9(( Cooling Capacity Test))	-	100000	All tests are performed at Rs. 1,00,000/-. Separate charges are not taken.
"9.11((Method of Measurement of Indian Seasonal Energy Efficiency Ratio (ISEER))")	-	100000	All tests are performed at Rs. 1,00,000/-. Separate charges are not taken.
9.7((Power Consumption Test for Cooling))	-	100000	All tests are performed at Rs. 1,00,000/-. Separate charges are not taken.
"8.3((Method of Measurement of Indian Seasonal Energy Efficiency Ratio (ISEER))")	-	100000	All tests are performed at Rs. 1,00,000/-. Separate charges are not taken.
10((CALCULATIONS))	-	100000	All tests are performed at Rs. 1,00,000/-. Separate charges are not taken.
11((INSTRUMENTS))	-	100000	All tests are performed at Rs. 1,00,000/-. Separate charges are not taken.

09 Jul, 2028

-
Scope is restricted only for Cl.9.9 (Cooling Capacity Test), Cl.9.11 (Iseer)

9818

Indian Institute of Packaging (IIP), Delhi

8177901

IS 2552 (1989)

Steel drums (galvanized and ungalvanized) - Specification (Third Revision)

7850 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.4(Dimensions)	-	550	PRICE IS PER EACH DIMENSION
Cl-5(Capacity and Dimensions)	-	550	CHARGES ARE FOR CAPACITY AND DIMENSIONS EACH
Cl-6.1(The body and the ends of the drums)	-	550	-
Cl-6.2(Thickness)	-	550	-
Cl-7(Construction)	-	550	-
Cl-8(Finish)	-	550	-
Cl-9.1(Air Pressure Test)	-	800	-
Cl-9.2(Drop Test)	-	2200	-
Cl-9.3(Handle Pull Test)	-	1000	-
Cl-10(Marking)	-	550	-

-
-

9819

Wakefield Inspection Services India Pvt. Ltd, Mumbai

7182136

IS 12171 (2024)

Cotton Bales Specification Fourth Revision

1152 View breakup
Total testing charges: Rs. 1152/- (Combined charges for HVI + Trash content test = Rs. 402/- Combined charges for dimensions and mass = Rs. 1000/-)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(Staple Length)	-	201	170+gst
5.1.2(Trash Content)	-	201	170+gst
5.1.3(Moisture Content)	-	295	250+gst
5.1.4(Strength of Fibre)	-	201	170+gst
5.1.5(Micronaire Value)	-	201	170+gst
5.2.1(Dimensions)	-	201	170+gst
5.2.2(Mass (Weight))	-	201	170+gst
Cl-5.1.1(Staple Length)	-	201	170+GST
Cl-5.1.2(Trash Content)	-	201	170+GST
Cl-5.1.3(Moisture Content)	-	295	250+GST
Cl-5.1.4(Strength of Fibre)	-	201	170+GST
Cl-5.1.5(Micronaire Value)	-	201	170+GST
Cl-5.2.2(Mass (Weight))	-	201	170+GST
Cl-5.2.1(Dimensions)	-	201	170+GST

29 Oct, 2028

-
Exclusion: Cl.5.2.3.1 (a) Cotton Fabric Cl.5.2.3.1 (b) Bailing hoops Cl.5.2.3.1 (c) cotton twine

9820

TATA STEEL, Jamshedpur

5182706

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

Fe 600/Rebar/ 45 mm

10460 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 9.4(Load In Other Direction From Bend)	-	4000	-
Cl 9.3(Load In One Direction)	-	4000	-
Cl 8.1(UTM)	-	4000	-
Cl 7.2(Weight)	-	4000	-
Cl 6.1(Length, Width & Thickness)	-	2460	-
Cl 5(Deformations and Surface Characteristics)	-	2460	-
Cl 9.4(Load In Other Direction From Bend)	-	4000	-
Cl 9.3(Load In One Direction)	-	4000	-
Cl 8.1(UTM)	-	4000	-
Cl 7.2(Weight)	-	4000	-
Cl 6.1(Length, Width & Thickness)	-	2460	-
Cl 5(Deformations and Surface Characteristics)	-	2460	-
Cl 9.4(Load In Other Direction From Bend)	-	4000	-
Cl 9.3(Load In One Direction)	-	4000	-
Cl 8.1(UTM)	-	4000	-
Cl 7.2(Weight)	-	4000	-
Cl 6.1(Length, Width & Thickness)	-	2460	-
Cl 5(Deformations and Surface Characteristics)	-	2460	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON +EQUIVELENT )	-	4000	-
4.1(Sulphur and phosphorous)	-	4000	-
4.1(CE)	-	4000	-
4.1( Nitrogen%)	-	4000	-
4.1(Ni)	-	4000	-
4.1(Mo)	-	4000	-
4.1(Cr)	-	4000	-
4.1( Ti)	-	4000	-
4.1(V)	-	4000	-
4.1( Nb)	-	4000	-
4.1( Aluminium %)	-	4000	-
4.1( Copper %)	-	4000	-
4.1(Silicon %)	-	4000	-
4.1(Sulphur %)	-	4000	-
4.1(Phosphorus %)	-	4000	-
4.1(Manganese %)	-	4000	-
4.1(Carbon %)	-	4000	-
Cl.9.4 & Cl. 9.4.1(Rebend test)	-	4000	-
Cl. 9.3, Table 4(Bend Test )	-	4000	-
Cl. 8.1 Table 3(Elongation, percentage)	-	4000	-
Cl. 8.1 Table 3(TS/YS ratio)	-	4000	-
Cl. 8.1 Table 3(Tensile Strength (TS))	-	4000	-
Cl. 8.1 Table 3(Yield Stress (YS))	-	4000	-
Cl. 7.2 Table -2 (Nominal Mass)	-	4000	-
Cl. 6.1(Nominal Size)	-	4000	-
Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar))	-	4000	-
Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), )	-	4000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR+PHOSPHUR)	-	4000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 MANGANESE)	-	4000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 NITROGEN)	-	4000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 PHOSPHURS)	-	4000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR)	-	4000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON )	-	4000	-
Cl.4.2 of IS 1786 (Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	4000	-
Cl.4.2 of IS 1786 (Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	4000	-
Cl.4.2 of IS 1786 (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	4000	-
Cl.4.2 of IS 1786 (Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	4000	-
Cl.4.2 of IS 1786 (Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	4000	-
Cl.4.2 of IS 1786 (Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	4000	-
Cl.4.2 of IS 1786 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	4000	-
Cl.4.2 of IS 1786 (Grade:- Fe 415D,Fe 415S, Fe 500D,Fe 500S,Fe 550D)(Carbon Equivalent)	-	4000	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur & Phosphorous)	-	4000	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Phosphorous- IS 228)	-	4000	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur-IS 228)	-	4000	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Carbon-IS 228)	-	4000	-
8.18.1 Table 3(Total elongation at maximum force)	-	4000	-
Cl 5(Deformations and Surface Characteristics)	-	2460	-
4.2(Niobium (Nb))	-	4000	-
4.2(Boron (B))	-	4000	-
Cl. 8.1 Table 3(TS/YS Ratio)	-	4000	-
Cl. 5.3 (b)(The ribs contributing the projected area - Transverse Ribs)	-	4000	-
Cl. 5.3 (a)(The ribs contributing the projected area - Longitudinal Ribs)	-	4000	-
Cl. 8.1 Table 3(Maximum Extension)	-	4000	-
Cl. 8.1 Table 3(Total Elongation at Maximum Force)	-	4000	-
Cl. 6.2, 6.3 Table 1(Gross Cross Sectional Area, A)	-	4000	-
Cl. 4.3(Visual Inspection.)	-	2460	-
Cl. 5.2(Surface Characteristics)	-	2460	-
Clause 9.4(Rebend Test)	-	4000	-
Clause 6.3(Effective Cross-sectional Area)	-	4000	-
Clause 8.1(Table 3)(Total Elongation at Maximum Force)	-	4000	-
Cl 9.4(Load In Other Direction From Bend)	-	4000	-
Cl 9.3(Load In One Direction)	-	4000	-
Cl 8.1(UTM)	-	4000	-
Cl 7.2(Weight)	-	4000	-
Cl 6.1(Length, Width & Thickness)	-	2460	-
Cl 5(Deformations and Surface Characteristics)	-	2460	-
Cl 5(Deformations and Surface Characteristics)	-	2460	-
Cl 6.1(Length, Width & Thickness)	-	2460	-
Cl 7.2(Weight)	-	4000	-
Cl 8.1(UTM)	-	4000	-
Cl 9.3(Load In One Direction)	-	4000	-
Cl 9.4(Load In Other Direction From Bend)	-	4000	-
13(Identification and marking)	-	4000	-
7.0 & 7.1(Specified lengths - SOP MT-23)	-	2460	-
8.0 & 8.1("Total elongation at maximum force on 5.65 vSo mm GL. ")	-	4000	-
4.3(Rolling and cold working of bars/wire)	-	0	-
7.1(Specified length)	-	4000	-
9.1(Preparation of test sample)	-	2460	-
9.2(Tensile test,IS:1608(Pt1)-2018)	-	4000	-
9.5(Retest)	-	4000	-
12(Inspection)	-	2460	-
Clause 4.2 Note 2, Amendment 1 & 3(Nb+V+B+Ti)	-	4000	-
Clause 4.2 Note 3, Amendment 1 & 3(Cr+Cu+Ni+Mo+P)	-	4000	-
Clause 4.2, Amendment 3 Note 4("In order to ascertain whether sufficient quantities of nitrogen binding elements are present, following formula may be used, where all elements are in ppm. (N−120)< (Al free/10)+((Ti+V)/7)+(Nb/14)")	-	4000	-
1()	-	0	-

25 Nov, 2027

-
Exclusion: Cl.5.7 (Pull Out (Bond Test))

9821

CEPT Advisory Foundation

7186736

IS 1391 : Part 1 (2023)

Room Air Conditioners Specification Part 1 Unitary Air Conditioners Fourth Revision

100000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.8(Power Consumption Test for Cooling)	-	100000	All tests are done together with Rs. 1,00,000/-.
9.10(Cooling Capacity Test)	-	100000	All tests are done together with Rs. 1,00,000/-.
"9.12(Method of Measurement of Indian Seasonal Energy Efficiency Ratio (ISEER)")	-	100000	All tests are done together with Rs. 1,00,000/-.
"8.3((Method of Measurement of Indian Seasonal Energy Efficiency Ratio (ISEER))")	-	100000	All tests are done together with Rs. 1,00,000/-.
10(CALCULATIONS)	-	100000	All tests are done together with Rs. 1,00,000/-.
11(INSTRUMENTS)	-	100000	All tests are done together with Rs. 1,00,000/-.

09 Jul, 2028

-
Scope is restricted only for Cl.9.8 (Power Consumption Test for Cooling), Cl.9.10 (Cooling Capacity Test), Cl.9.12 (Iseer)

9822

POLYMER TESTING LABORATORY, CIPET:SARP-APDDRL

6187504

IS 4985 (2021)

UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES SPECIFICATION Fourth Revision

24400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1(Colour)	-	500	-
10.1(Surface Finish)	-	0	-
7.2.1.1 Table3(Angle of taper (Note-1))	-	0	-
10.7(Sulphated Ash Content)	-	1200	-
5(CLASSIFICATION OF PIPES)	-	0	-
Cl-7.1(Mean out side Diameter (For less than or equal to 40 mm- Average of 8 , For higher diameters up to 110 mm average of 6))	-	500	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	0	Included in cl 7
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	0	Included in cl 7
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. Variation)	-	0	Included in cl 7
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	0	Included in cl 7
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	0	Included in cl 7
7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum))	-	0	Included in cl 7
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	0	Included in cl 7
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum))	-	0	Included in cl 7
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	0	Included in cl 7
Cl- 7.2(Socket length (Take 4 reading & minimum will be reported))	-	0	Included in cl 7
7.2.1(DIMENSIONS-Socket)	-	0	Included in cl 7
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	0	Included in cl 7
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum))	-	0	Included in cl 7
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum))	-	0	Included in cl 7
7.2.1.2(a)-Table 5(DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement)	-	0	Included in cl 7
7.2.1.2-Table 4(DIMENSIONS-Sockets for elastomeric sealing ring joints-Socket inner Diameter)	-	0	Included in cl 7
8(SEALING RINGS)	-	0	-
9.1(PIPE ENDS)	-	0	-
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	0	Included in cl 10
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	0	Included in cl 10
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	700	-
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	1200	Test Specimen preparation charges inclusive
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	1100	-
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	700	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	11000	Type test (1000 hr/60 deg C)
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	850	Acceptance test (1 hr/27 deg C)
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	5000	Type test (1000 hrs /27 deg C)
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	850	Acceptance test (1 hr/27 deg C)
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	0	included in cl 11.1
11.2(Resistance to External Blows at 0°C)	-	1500	Test Specimen preparation charges inclusive
10.3(Effect on Water Test)	-	3000	-
6.1.2(PVC Resin)	-	3075	Composition VCM Content K - Value
7.1.3(mean outside diameter, outside diameter at any point, and wall thickness of plumbing pipes)	-	0	Included in cl 7.0
7.1.4(Length)	-	0	Included in cl 7.0
6.1.1(VCM Content)	-	0	Included in cl 6.1.2
7.2.1.2b(Maximum inner diameter of groove)	-	0	Included in cl 7.0
13.1(Marking)	-	0	Included in cl 10.1

-
-

9823

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 11329 (2018)

Finned type heat exchanger for room air conditioner (First Revision)

225000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(CLASSIFICATION AND NOMENCLATURE)	-	500	-
5(MATERIALS)	-	105500	-
6(QUALITY REQUIREMENTS)	-	53500	-
7(TESTING)	-	0	-
7.1("Permissible Assembly Contamination Specification")	-	2000	-
7.1.1(Internal Contamination)	-	2000	-
7.2(Pressure Test for Assembly Tightness)	-	0	-
7.2.1(Water Leak Test)	-	10000	-
7.2.2(Helium Leak Test)	-	0	-
7.2.3(Vacuum Leak Test Process)	-	0	-
7.3(Test for Mechanical Strength)	-	2000	-
7.3.1(Burst Test)	-	10000	-
7.3.2(Fatigue Strength Test)	-	3000	-
7.4(Test for Corrosion Resistance)	-	17000	-
8(MARKING)	-	500	-
9()	-	0	-
7.1.2(Moisture content)	-	0	-

-
-

9824

Testtex India Laboratories Private Limited, Noida

8138306

IS 9873 : Part 3 (2017)

Safety of toys: Part 3 migration of certain elements (Second Revision)

Migration of Certain Elements

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1 - Table 1(Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	-
4.1 - Table 1(Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	-
4.1 - Table 1(Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	-
4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	-
4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	-
4.1 - Table 1(Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	-
4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	-
4.1 - Table 1(Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	-
4.1 - Table 1(Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	0	Test Repeated
4.1 - Table 1(Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	0	Test Repeated
4.1 - Table 1(Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	0	Test Repeated
4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	0	Test Repeated
4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	0	Test Repeated
4.1 - Table 1(Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	0	Test Repeated
4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	0	Test Repeated
4.1 - Table 1(Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	0	Test Repeated

-
Included w.e.f. 26.11.2024

9825

BIS, Eastern Regional Laboratory (ERL)

None

IS 7750 (2013)

Cashew kernels - Specification (First Revision)

Rs.2450.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 3.1 (General Characteristics)	-
Cl. 3.2 (Visual Examination)	-
Cl. 3.3 (Freedom from moulds, Insects, etc)	-
Cl. 3.4 (Extraneous Matter)	-
Cl. 3.5 (Extraneous Vegetable Matter)	-
Cl. 3.6 (Acidity)	-
Cl. 3.7 (Moisture Content)	-

-
Complete

9826

Testtex India Laboratories Private Limited, Noida

8138306

IS 14544 (2022)

LEATHER SAFETY AND PROTECTIVE FOOTWEAR WITH DIRECT MOULDED POLYVINYL CHLORIDE PVC SOLE - SPECIFICATION First Revision

Leather Safety and Protective Footwear with Direct Moul

72600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8.1(Cl. No. 5.10 of IC 15298(P-1):2015)	-	68600		Clause No. 6 (Physical Requirements) & Clause No. 7 (Chemical Requirements)
8.2(Cl. No. 5.10 of IC 15298(P-1):2015)	-	4000		Clause No. 8 (Additional Requirements)

-
Included w.e.f 10.12.2024

9827

Testtex India Laboratories Private Limited, Noida

8138306

IS 1989 : Part 2 (1986)

Specification for leather safety boots and shoes: Part 2 for heavy metal industries (Fourth Revision)

Leather Safety Boots and Shoes: Part 2 Heavy Metal Ind.

72200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Marking)	-	0	-
7(Design)	-	200	-
8(a) Upper Leather)	-	2300	Clause 8.1
8(b) Lining Leather)	-	5300	Clause 8.2
8(c) Bottom Material)	-	15200	Clause 8.3
8(d) Steel Toe Cap)	-	3200	Clause 8.4
8(e) Tape)	-	700	Clause 8.5
8(f) Bottom Filling)	-	300	Clause 8.6
8(g) Eyelet)	-	200	Clause 8.7
8(h) Toe Compound)	-	300	Clause 8.8
8(i) Threads)	-	1700	Clause 8.9
8(j) Rivets)	-	300	Clause 8.10
8(k) Screw Wire)	-	0	Clause 8.11
8(l) Heel Pin)	-	200	Clause 8.12
8(m) Shank)	-	200	Clause 8.13
8(n) Laces)	-	1700	Clause 8.14
8(o) Tongue Lining)	-	300	Clause 8.15
8(p) Adhesive)	-	200	Clause 8.16
8(q) Strengthening Piece)	-	200	Clause 8.17
8(r) Leather Components)	-	400	Clause 8.18
9(Manufacture)	-	0	Clause 9
10(Finish)	-	200	Clause 10
11(a) Boots with Leather Sole and Heel)	-	300	Clause 11.1
11(b) Boots with Rubber Sole and Heel)	-	300	Clause 11.2
12(Performance Test)	-	2000	Clause 11.2 Package Testing Charges for Section 1 : RS. 35400
13(Design)	-	200	Clause 13
14(a) Upper Leather)	-	2300	Clause 14.1
14(b) Lining Leather)	-	5300	Clause 14.2
14(c) Bottom Material)	-	16200	Clause 14.3
14(d) Steel Toe Cap)	-	3500	Clause 14.4
14(e) Tape)	-	1000	Clause 14.5
14(f) Bottom Filling)	-	300	Clause 14.6
14(g) Eyelet)	-	200	Clause 14.7
14(h) Toe Compound)	-	300	Clause 14.8
14(i) Threads)	-	1700	Clause 14.9
14(j) Rivets)	-	300	Clause 14.10
14(k) Screw Wire)	-	0	Clause 14.11
14(l) Heel Pin)	-	200	Clause 14.12
14(m) Shank)	-	200	Clause 14.13
14(n) Laces)	-	1700	Clause 14.14
14(o) Tongue Lining)	-	300	Clause 14.15
14(p) Adhesive)	-	200	Clause 14.16
14(q) Leather Components)	-	400	Clause 14.17
15(Manufacture)	-	0	Clause 15
16(Finish)	-	200	Clause 16
17(a) Shoes with Leather Sole and Heel)	-	300	Clause 17.1
17(b) Shoes with Rubber Sole and Heel)	-	300	Clause 17.2
18(Performance Test)	-	2000	Clause 18 Package Testing Charges for Section 1 : RS. 36800
4(Marking)	-	0	Clause Repeated
7(Design)	-	0	Clause Repeated
8(a) Upper Leather)	-	0	Clause Repeated
8(b) Lining Leather)	-	0	Clause Repeated
8(c) Bottom Material)	-	0	Clause Repeated
8(d) Steel Toe Cap)	-	0	Clause Repeated
8(e) Tape)	-	0	Clause Repeated
8(f) Bottom Filling)	-	0	Clause Repeated
8(g) Eyelet)	-	0	Clause Repeated
8(h) Toe Compound)	-	0	Clause Repeated
8(i) Threads)	-	0	Clause Repeated
8(j) Rivets)	-	0	Clause Repeated
8(k) Screw Wire)	-	0	Clause Repeated
8(l) Heel Pin)	-	0	Clause Repeated
8(m) Shank)	-	0	Clause Repeated
8(n) Laces)	-	0	Clause Repeated
8(o) Tongue Lining)	-	0	Clause Repeated
8(p) Adhesive)	-	0	Clause Repeated
8(q) Strengthening Piece)	-	0	Clause Repeated
8(r) Leather Components)	-	0	Clause Repeated
9(Manufacture)	-	0	Clause Repeated
10(Finish)	-	0	Clause Repeated
11(a) Boots with Leather Sole and Heel)	-	0	Clause Repeated
11(b) Boots with Rubber Sole and Heel)	-	0	Clause Repeated
12(Performance Test)	-	0	Clause Repeated
13(Design)	-	0	Clause Repeated
14(a) Upper Leather)	-	0	Clause Repeated
14(b) Lining Leather)	-	0	Clause Repeated
14(c) Bottom Material)	-	0	Clause Repeated
14(d) Steel Toe Cap)	-	0	Clause Repeated
14(e) Tape)	-	0	Clause Repeated
14(f) Bottom Filling)	-	0	Clause Repeated
14(g) Eyelet)	-	0	Clause Repeated
14(h) Toe Compound)	-	0	Clause Repeated
14(i) Threads)	-	0	Clause Repeated
14(j) Rivets)	-	0	Clause Repeated
14(k) Screw Wire)	-	0	Clause Repeated
14(l) Heel Pin)	-	0	Clause Repeated
14(m) Shank)	-	0	Clause Repeated
14(n) Laces)	-	0	Clause Repeated
14(o) Tongue Lining)	-	0	Clause Repeated
14(p) Adhesive)	-	0	Clause Repeated
14(q) Leather Components)	-	0	Clause Repeated
15(Manufacture)	-	0	Clause Repeated
16(Finish)	-	0	Clause Repeated
17(a) Shoes with Leather Sole and Heel)	-	0	Clause Repeated
17(b) Shoes with Rubber Sole and Heel)	-	0	Clause Repeated
18(Performance Test)	-	0	Clause Repeated
4(Marking)	-	0	Clause Repeated
7(Design)	-	0	Clause Repeated
8(a) Upper Leather)	-	0	Clause Repeated
8(b) Lining Leather)	-	0	Clause Repeated
8(c) Bottom Material)	-	0	Clause Repeated
8(d) Steel Toe Cap)	-	0	Clause Repeated
8(e) Tape)	-	0	Clause Repeated
8(f) Bottom Filling)	-	0	Clause Repeated
8(g) Eyelet)	-	0	Clause Repeated
8(h) Toe Compound)	-	0	Clause Repeated
8(i) Threads)	-	0	Clause Repeated
8(j) Rivets)	-	0	Clause Repeated
8(k) Screw Wire)	-	0	Clause Repeated
8(l) Heel Pin)	-	0	Clause Repeated
8(m) Shank)	-	0	Clause Repeated
8(n) Laces)	-	0	Clause Repeated
8(o) Tongue Lining)	-	0	Clause Repeated
8(p) Adhesive)	-	0	Clause Repeated
8(q) Strengthening Piece)	-	0	Clause Repeated
8(r) Leather Components)	-	0	Clause Repeated
9(Manufacture)	-	0	Clause Repeated
10(Finish)	-	0	Clause Repeated
11(a) Boots with Leather Sole and Heel)	-	0	Clause Repeated
11(b) Boots with Rubber Sole and Heel)	-	0	Clause Repeated
12(Performance Test)	-	0	Clause Repeated
13(Design)	-	0	Clause Repeated
14(a) Upper Leather)	-	0	Clause Repeated
14(b) Lining Leather)	-	0	Clause Repeated
14(c) Bottom Material)	-	0	Clause Repeated
14(d) Steel Toe Cap)	-	0	Clause Repeated
14(e) Tape)	-	0	Clause Repeated
14(f) Bottom Filling)	-	0	Clause Repeated
14(g) Eyelet)	-	0	Clause Repeated
14(h) Toe Compound)	-	0	Clause Repeated
14(i) Threads)	-	0	Clause Repeated
14(j) Rivets)	-	0	Clause Repeated
14(k) Screw Wire)	-	0	Clause Repeated
14(l) Heel Pin)	-	0	Clause Repeated
14(m) Shank)	-	0	Clause Repeated
14(n) Laces)	-	0	Clause Repeated
14(o) Tongue Lining)	-	0	Clause Repeated
14(p) Adhesive)	-	0	Clause Repeated
14(q) Leather Components)	-	0	Clause Repeated
15(Manufacture)	-	0	Clause Repeated
16(Finish)	-	0	Clause Repeated
17(a) Shoes with Leather Sole and Heel)	-	0	Clause Repeated
17(b) Shoes with Rubber Sole and Heel)	-	0	Clause Repeated
18(Performance Test)	-	0	Clause Repeated

-
Included w.e.f 10.12.2024

9828

POLYMER TESTING LABORATORY, CIPET:SARP-APDDRL

6187504

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

36275 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.10(Slow Crack Growth Rate)	-	6000	Specimen preparation charges inclusive
8.9 table-6(Elongation at Break)	-	1800	-
8.8(Tensile Strength for Butt-fusion)	-	1800	-
8.7(Density)	-	700	-
8.5 (Oxidation Induction Time)	-	2200	-
8.4( Melt Flow Rate)	-	1100	-
8.2(Longitudinal Reversion Test)	-	1200	specimen preparation charges inclusive
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	1600	-
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	1600	-
7.4.1.2(Ovality)	-	750	-
Cl-7.4(Mean Outside Diameter (For upto 50 mm take 8 reading, above 50mm take 6 reading & average will be reported))	-	0	included in 7.4.1.2
7.2(Length)	-	0	included in 7.4.1.2
6.2.1(6.1.1 Identification Stripes)	-	0	500
6.2(Colour)	-	500	-
6.1.4(PIPE DESCRIPTION)	-	0	-
6.1.3 (PIPE DESCRIPTION)	-	0	-
6, 6.1.2(PIPE DESCRIPTION)	-	0	-
6, 6.1.1(PIPE DESCRIPTION)	-	0	-
6, 6.1(PIPE DESCRIPTION)	-	0	-
8.6(Overall migration)	-	2200	specimen preparation charges inclusive
8.3(Carbon black)	-	925	-
5.4(Anti oxydent)	-	0	-
5.3(e)(Carbon Black Master Batch)	-	0	-
5.3(d)(Carbon Black Master Batch)	-	0	-
5.3(c)(Carbon Black Master Batch)	-	0	-
5.3(b)(Carbon Black Master Batch)	-	0	-
5.3 (a)(Carbon Black Master Batch)	-	0	-
5.2(Polyethylene Resin)	-	0	-
5, 5.1 table-1(MATERIALS)	-	0	-
7()	-	0	-
5.2(Density)	-	700	-
5.2(MFI @ 1900C/5.0 Kg)	-	1100	-
5.2(Volatile matter Content)	-	700	-
5.3(Toluene Extract)	-	0	-
Clause 7.1(Visual Apperance)	-	0	already added
Clause 7.3(Coiling)	-	0	-
Clause 8.3(Carbon Black content)	-	925	-
Clause 8.3(Carbon Black Dispersion)	-	700	-
Clause 8.6(Overall migration (stimulate))	-	2200	specimen preparation inclusive
Clause 8.6(Overall migration (surface of material))	-	0	-
7.1(Visual Appearance)	-	0	-
7.3(Coiling)	-	0	-
Table-2 (iii, iv)(Thermal Stability (Oxidation Induction Time), Volatile Matter)	-	0	-
Cl. 8.3(Carbon Black Content)	-	0	-
Cl. 8.3(Carbon Black Dispersion)	-	0	-
5.2,T2(Melt Flow rate(Temperature - 190oC,Mass 5kg)-IS 2530-1963)	-	0	-
8.7(Density-IS 7328:2020)	-	0	-
8.7(Corrected Density- IS 7328:2020)	-	0	-
8.9,T6("Tensile - IS 4984-2016 (Annexure-H)")	-	0	already added
8.9,T6("Elongation -IS 4984-2016 (Annexure-H)")	-	0	already added
Cl 8.3(Carbon Black Content)	-	0	-
Cl 8.3(Carbon Black Dispersion)	-	0	-

-
-

9829

POLYMER TESTING LABORATORY, CIPET:SARP-APDDRL

6187504

IS 2508 (2016)

Polyethylene films and sheets - Specification (Third Revision)

20575 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(Appearance)	-	500	-
5.1.2(Film Form)	-	0	included in 5.1.1
5.1.4(Density, Cl.5 of IS 13360(Part-3/Section-1))	-	700	-
5.1.5(Melt Flow Index. Cl 6, 7 of IS 13360(Part-4/Section-1))	-	1100	-
5.1.6a(Carbon Black Content, Annex-A)	-	925	-
5.1.6b(Ash Content, Annex-A)	-	1200	-
5.1.6c(Carbon Black Dispersion, Cl.16 of IS 2530)	-	700	-
5.2.2(Tolerance on Thickness, Annex-A)	-	500	-
6.1, Table 1(Tensile strength at break. A) Machine Direction. IS 13360 (Part 5/Sec 1))	-	1800	specimen preparation charges inclusive
6.1, Table 1(Tensile strength at break. B) Transverse Direction. IS 13360 (Part 5/Sec 3))	-	1300	-
6.1, Table 1(Ageing test at (70-1)c for 7 days , cl 4 IS 7016 )	-	4200	conditioning charge
6.1, Table 1(Elongation at break ,A) Machine direction .IS 13360(Part-5/sec-1) )	-	0	included with tensile strength cl 6.1
6.1, Table 1(Elongation at break ,B) Cross-machine direction..IS 13360(Part-5/sec-3) )	-	0	included with tensile strength cl 6.1
6.1, Table 1(Dartimpact strength Method B of IS 13360 (Part-5/sec-6) )	-	850	-
6.1, Table 1(Tear resistence. A) Machine direction Annex B)	-	1600	specimen preparation charges inclusive
6.1, Table 1(Tear resistence. B) Transverse direction )	-	1100	-
7.1. Table 2(Tensile strength at break A) Machine direction IS 13360 (Part-5/sec-1) )	-	0	-
7.1. Table 2(Tensile strength at break,B) Crosse machine direction IS 13360 (Part-5/sec-3) )	-	0	-
7.1. Table 2(Ageing test at (70-1)c for 7 days , cl 4 IS 7016 )	-	0	-
7.1. Table 2(Elongation at break , A) Machine direction IS 13360 (Part-5/sec-3) IS 13360 (Part-5/sec-1) )	-	0	-
7.1. Table 2(Elongation at break , A) Transverse direction IS 13360 (Part-5/sec-3) )	-	0	-
7.1. Table 2(Dart impact strenght , Method A of IS 3360 (Part-5/sec-6) )	-	0	-
8.1, Table 3(Tensile properties ,A) Yield strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	-
8.1, Table 3(Tensile properties , B) Break strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	-
8.1, Table 3(Tensile properties ,C) Yield elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	-
8.1, Table 3(Tensile properties ,D) Break elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	-
8.1, Table 3(Tear resistance , Annex B)	-	0	-
8.1, Table 3(Puncture resistance , Annex C)	-	0	-
9.1, Table 4(Tensile properties ,A) Yield strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	-
9.1, Table 4(Tensile properties , B) Break strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	-
9.1, Table 4(Tensile properties ,C) Yield elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	-
9.1, Table 4(Tensile properties ,D) Break elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	-
9.1, Table 4(Tear resistance , Annex B)	-	0	-
9.1, Table 4(Puncture resistance , Annex C)	-	0	-
Clause 9.1 (Table 4)(Break Elongation)	-	0	-
Clause 9.1 (Table 4)(Yield Elonation)	-	0	-
Clause 9.1 (Table 4)(Break strength)	-	0	-
Clause 9.1 (Table 4)(Yield strength)	-	0	-
Clause 8.1(Table 3)(Break Elongation)	-	0	-
Clause 8.1(Table 3)(Break strength)	-	0	-
Clause 7.1(Table 2)(Dart Impact Strength)	-	0	-
Clause 7.1(Table 2)(Decrease in Tensile Strength after Ageing(Transverse Direction))	-	0	-
Clause 7.1(Table 2)(Decrease in Tensile Strength after Ageing(Machine Direction))	-	0	-
Clause 6.1(Table 1)(Decrease in Tensile Strength after Ageing(Transverse Direction))	-	0	-
Clause 6.1(Table 1)(Decrease in Tensile Strength after Ageing(Machine Direction))	-	0	-
Clause 5.2.3(Tolerance on Width)	-	0	-
Cl.5.1.6(a)(Carbon Black Content)	-	0	-
Cl.5.1.6(b)(Ash content)	-	0	-
Cl.5.1.6(c)(Dispersion of Carbon Black)	-	0	-
5.2.1.1(Nominal Thickness)	-	0	-
5.2.1.2(Nominal width)	-	0	-
5.1.3(Odour)	-	0	-

-
-

9830

Testtex India Laboratories Private Limited, Noida

8138306

IS 1989 : Part 1 (1986)

Specification for leather safety boots and shoes: Part 1 for miners (Fourth Revision)

Specification for leather safety boots and shoes: Part

84300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1 (a)(Marking)	-	0	-
4.1 (b)(Marking)	-	0	-
4.1 (c)(Marking)	-	0	-
4.1 (d)(Marking)	-	0	-
4.1 (e)(Marking)	-	0	-
7.1(Design)	-	38300	Section 1 (Clause 7.1, Clause 8)
10.1(Finish)	-	0	-
10.3(Finish)	-	200	-
10.4(Finish)	-	200	-
11.1(Mass Boots with Leather Sole and Heel)	-	300	-
11.2(Mass Boots with Rubber Sole and Heel)	-	300	-
12(Performance test)	-	2000	-
13(Design)	-	40400	Section 2 (Clause 13 & Clause 14)
16.1(Finish)	-	200	-
16.2(Finish)	-	0	-
16.3(Finish)	-	200	-
16.4(Finish)	-	200	-
17.1(Mass Shoes with Leather Sole and Heel)	-	300	-
17.2(Mass Shoes with Rubber Sole and Heel)	-	300	-
18(Performance test)	-	2000	-

-
Included w.e.f 10.12.2024

9831

BIS, Eastern Regional Laboratory (ERL)

None

IS 10238 (2001)

Fasteners - Threaded steel fasteners - Step bolts for steel structures - Specification (First Revision)

7200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 (DIMENSIONS AND TOLERANCES)	-
8.1 (FINISH)	-
Table 3 (x) (Vickers hardness)	-
table 3 (xi) (Brinell hardness)	-
Table 3 (xiv) (Surface hardness)	-

-
Excluding Critical dimension, Pitch length

9832

HEXIQON LABORATORY PRIVATE LIMITED, AHMEDABAD

7167306

IS 15410 (2003)

Containers for packaging of natural mineral water and packaged drinking water - Specification

100 ml to 25000 ml /PET, PP, PC, PE, PVC, PBT, PS

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0 (chem)(MATERIAL)	-	600	NA
4.6.2(TRANSPARANCY)	-	250	NA
4.6.3(LEAKAGE TEST)	-	1450	NA
4.6.4(DROP TEST)	-	300	NA
4.6.5(MIGRATION TEST)	-	1500	NA
4.6.6(PORTABILITY TEST)	-	2500	NA
4.6.6 (chem)(Water Potability test (after 30 days) (a) Taste (b) Odour)	-	2500	NA
4.6.5.1 (chem)(Colour migration (Caps))	-	1500	NA
4.6.5.1 (chem)(Colour migration (Container))	-	1500	NA
4.6.5 , IS:9845:1998 (chem)(Migration of Caps - a. Amount of extractive)	-	1500	NA
4.6.5 , IS:9845:1998 (chem)(Migration- b. Amount of extractive)	-	1500	NA
4.6.5 , IS:9845:1998 (chem)(Migration- a. Amount of extractive)	-	1500	NA
4.6.4, clause 8 of IS:2798:1998(Drop test )	-	300	NA
4.6.3, clause 6 of IS:2798:1998(Leakage test- c. Air pressure leakage)	-	1450	NA
4.6.3, clause 6 of IS:2798:1998(Leakage test- b. Vibration leakage)	-	1450	NA
4.6.3, clause 6 of IS:2798:1998(Leakage test- a. Closure leakage )	-	1450	NA
4.6.2.1, Annex A(Transparency (Blue tint in polycarbonate & PET containers of 5 litre and above capacity))	-	250	NA
4.6.2 Annex A(Transparency)	-	250	NA
4.5, IS:2798:1998(Wall thickness- Bottom, in mm)	-	250	NA
4.5, IS:2798:1998(Wall thickness- Middle , in mm)	-	250	NA
4.5, IS:2798:1998(Wall thickness- Top , in mm )	-	250	NA
4.4 , clause 5 of IS:2798:1998(Brimful capacity in ml)	-	500	NA
4.3(Workmanship, Finish & Appearance)	-	50	NA
4.2(Design, Shape & Dimension )	-	50	NA
4.1(Material)	-	600	NA
Cl. 4.5(Cl. 4.5 Wall Thickness (Bottom))	-	250	NA
Cl. 4.5(Cl. 4.5 Wall Thickness (Middle))	-	250	NA
Cl. 4.5(Cl. 4.5 Wall Thickness (Top))	-	250	NA
Cl. 4.4 (a)(Capacity)	-	250	NA
Cl. 4.3.2(Cl. 4.3.2 Finish & Appearance)	-	50	NA
Cl. 4.2(Cl. 4.2 Design, Shape & Dimension)	-	50	NA
Cl. 4.6.5 (chem)(Cl. 4.6.5 Color migration (Caps))	-	1500	NA
Cl. 4.6.5 (chem)(Cl. 4.6.5 Overall migration (Caps))	-	1500	NA
Cl. 4.6.5(Cl. 4.6.5 Migration)	-	1500	NA
Cl. 4.6.3(Cl. 4.6.3 Air Pressure Leakage)	-	1450	NA
Cl. 4.6.3(Cl. 4.6.3 Vibration Leakage)	-	1450	NA
Cl. 4.6.3( Cl. 4.6.3 Closure Leakage)	-	1450	NA
4.6.2.1, Annex-A(Transparency of container)	-	250	NA
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(ix)("Specific migration for Cap,Phthalic acid, bis(2-ethylhexyl) ester (DEHP)")	-	1500	NA
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(viii)(Specific migration for Cap,Antimony)	-	700	NA
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(vii)(Specific migration for Cap,Zinc)	-	700	NA
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(vi)(Specific migration for Cap,Manganese)	-	700	NA
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(v)(Specific migration for Cap,Lithium)	-	700	NA
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(iv)(Specific migration for Cap,Iron)	-	700	NA
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(iii)(Specific migration for Cap,Copper)	-	700	NA
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(ii)(Specific migration for Cap,Cobalt)	-	700	NA
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(i)(Specific migration for Cap,Barium)	-	700	NA
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(ix)("Specific migration for container,Phthalic acid, bis(2-ethylhexyl) ester (DEHP)")	-	1500	NA
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(viii)(Specific migration for container,Antimony)	-	700	NA
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(vii)(Specific migration for container,Zinc)	-	700	NA
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(vi)(Specific migration for container,Manganese)	-	700	NA
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(v)(Specific migration for container,Lithium)	-	700	NA
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(iv)(Specific migration for container,Iron)	-	700	NA
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(iii)(Specific migration for container,Copper)	-	700	NA
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(ii)(Specific migration for container,Cobalt)	-	700	NA
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(i)(Specific migration for container,Barium)	-	700	NA
Clauses 5.3.9.2 and 5.3.9.3,Table 3, S.no.(ix)(Phthalic acid, bis(2-ethylhexyl)ester (DEHP)-ISO 18856)	-	1500	NA

-
Amendment No. 6 w.e.f. 29.12.2022

9833

Atharva Laboratories Pvt. Ltd. (D115A), Noida (8134206)

8134206

IS 15844 : Part 1 (2023)

SPORTS FOOTWEAR PART -1 GENERAL PURPOSEFirst Revision

64000 View breakup
Rs. 34,000/- (Without Innocuousness Test), Rs. 64,000/- (With Innocuousness Test)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl No.4.1(Sampling and Conditioning)	-	0	Ok
Cl No.4.2(Construction)	-	100	Ok
Cl No.4.3(Whole Footwear)	-	0	Ok
4.3.1(Insole)	-	150	Ok
4.3.2(Toe spring height)	-	100	Ok
4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	450	Ok
4.3.4("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	450	Ok
4.3.5(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	450	Ok
4.3.6(Energy Absorption at Seat Region)	-	450	Ok
4.3.7(Complete Shoe Flexing)	-	750	Ok
4.3.8(Washability)	-	600	Ok
4.3.9(Slip Resistance)	-	600	Ok
Cl No.4.4 , Table No. 2 , i) , a)(Flexing resistance, Dry condition)	-	450	Ok
Cl No.4.4 , Table No. 2 , i) , b)(Flexing resistance, Wet condition)	-	450	Ok
Cl No.4.4 , Table No. 2 , ii)(Tear strength (average force), Min, N)	-	450	Ok
Cl No.4.4 , Table No. 2 , iii) , a)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Dry: (rubbing) Rating: (Marring and staining) ")	-	450	Ok
Cl No.4.4 , Table No. 2 , iii) , b)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Wet: (rubbing) Rating: (Marring and staining)")	-	450	Ok
Cl No.4.4 , Table No. 2 , iv) , a)(Water vapour permeability, mg/cm2h, Min)	-	450	Ok
Cl No.4.4 , Table No. 2 , iv) , b)(Water vapour coefficient, mg/cm2 , Min)	-	225	Ok
Cl No.4.4 , Table No. 2 , v)(Stitch tear strength (double hole), N/mm, Min)	-	450	Ok
Cl No.4.4 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Min Rating: (Marring)")	-	450	Ok
Cl No.4.4 , Table No. 2 , i)(Breaking strength, N/mm, Min)	-	450	Ok
Cl No.4.4 , Table No. 2 , ii)(Elongation at break, percent Min)	-	300	Ok
Cl No.4.4 , Table No. 2 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	450	Ok
Cl No.4.4 , Table No. 2 , iv) , a)(Flexing resistance, Dry condition)	-	225	Ok
Cl No.4.4 , Table No. 2 , iv) , b)(Flexing resistance, ,Wet condition)	-	225	Ok
Cl No.4.4 , Table No. 2 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	450	Ok
Cl No.4.4 , Table No. 2 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	225	Ok
Cl No.4.4 , Table No. 2 , vi)(Hydrolysis resistance)	-	900	Ok
Cl No.4.4 , Table No. 2 , vii)(Bursting Strength, kg/cm2 , Min)	-	450	Ok
Cl No.4.5 , Table No. 3 , i)(Tear strength, N, Min)	-	450	Ok
Cl No.4.5 , Table No. 3 , ii)(Abrasion resistance, cycles)	-	450	Ok
Cl No.4.5 , Table No. 3 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, Min")	-	450	Ok
Cl No.4.5 , Table No. 3 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, Min")	-	450	Ok
Cl No.4.5 , Table No. 3 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	450	Ok
Cl No.4.5 , Table No. 3 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	225	Ok
Cl No.4.6 , Table No. 4 , i)(Thickness, mm, Min)	-	100	Ok
Cl No.4.6 , Table No. 4 , ii)(Flexing index, Min)	-	600	Ok
Cl No.4.6 , Table No. 4 , iii)(Abrasion resistance, at 400 cycles)	-	450	Ok
Cl No.4.6 , Table No. 4 , iv) , a)(Water Absorption, mg/cm2 , Min)	-	300	Ok
Cl No.4.6 , Table No. 4 , iv) , b)(Water Desorption, percent, Min)	-	150	Ok
Cl No.4.7, Table No. 5 , i)(Thickness, mm, Min)	-	100	Ok
Cl No.4.7, Table No. 5 , ii)(Abrasion resistance, cycles)	-	450	Ok
Cl No.4.7, Table No. 5 , iii) , a)(Water Absorption, mg/cm2 , Min)	-	300	Ok
Cl No.4.7, Table No. 5 , iii) , b)(Water Desorption, percent, Min)	-	150	Ok
Cl No.4.8 , Table No. 6 , i)(Abrasion resistance (Volume loss), mm3 , Max)	-	450	Ok
Cl No.4.8 , Table No. 6 , ii)("Flexing resistance Belt Method at 90 diameter Mandrel or Bennewart method, cut growth, Max")	-	600	Ok
Cl No.4.8 , Table No. 6 , iii)("Hydrolysis resistance, cut growth after 150 000 flexes, in mm, Max")	-	900	Ok
Cl No.4.9 , Table No. 7 , i)(Compression set, percent, Max)	-	450	Ok
Cl No.4.9 , Table No. 7 , ii)(Split tear strength, kg/25 mm, Min)	-	450	Ok
Cl No.4.9 , Table No. 7 , iii)(Heat shrinkage, percent, Max)	-	450	Ok
Cl No.4.10 , Table No. 8 , i)(First dry collapsing load, hardness, N, Min)	-	450	Ok
Cl No.4.10 , Table No. 8 , ii)(Resilience, percent, Min)	-	450	Ok
Cl No.4.10 , Table No. 8 , iii)(Moisture resistance, percent, Min)	-	300	Ok
Cl No.4.10 , Table No. 8 , iv) , a)(Initial dry area shape retention, percent, Min)	-	450	Ok
Cl No.4.10 , Table No. 8 , iv) , b)(Area shape retention after 10th collapse, dry, percent, Min)	-	450	Ok
Cl No.4.11 , Table No. 9 , i)(Peel strength, N/mm, Min)	-	450	Ok
Cl No.4.11 , Table No. 9 , ii)(Shear strength, kPa , Min)	-	600	Ok
Cl No.4.12 , Table No. 10 , i)(Limit of useful extension, percent, Min)	-	450	Ok
Cl No.4.13 , Table No. 11 , i)(Breaking strength of lace, N, Min)	-	450	Ok
Cl No.4.13 , Table No. 11 , ii)(Lace tag strength, N, Min)	-	450	Ok
Cl No.4.13 , Table No. 11 , iii)(Lace to lace abrasion,)	-	450	Ok
Cl No.4.13 , Table No. 11 , iv)("Colour fastness to water Gray Scale Rate, Min Rating")	-	450	Ok
Cl No.4.13 , Table No. 11 , v)(Strength of Buckle/Ski hook, N, Min)	-	450	Ok
Cl No.4.13 , Table No. 11 , vi)(Corrosion resistance)	-	450	Ok
Cl No . 4.14("Chemical Requirement on Complete Product for all Types of Sports Shoe")	-	22500	Ok
Cl No . 5(MARKING AND PACKING)	-	500	Ok
Cl No . 4.14, Table no. 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	1791	Ok
Cl No . 4.14, Table no. 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	1791	Ok
Cl No . 4.14, Table no. 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	1791	Ok
Cl No . 4.14, Table no. 1 of IS 17011(iv)(Chromium (VI))	-	2291	Ok
Cl No . 4.14, Table no. 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	1792	Ok
Cl No . 4.14, Table no. 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	1792	Ok
Cl No . 4.14, Table no. 1 of IS 17011(vii)(Formaldehyde)	-	1792	Ok
Cl No . 4.14, Table no. 1 of IS 17011(viii)(Organotin compounds)	-	1792	Ok
Cl No . 4.14, Table no. 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	1792	Ok
Cl No . 4.14, Table no. 1 of IS 17011(x)(pH)	-	1792	Ok
Cl No . 4.14, Table no. 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	1792	Ok
Cl No . 4.14, Table no. 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	1792	Ok
Clause 4.2 - 4.2.1(Construction)	-	0	Ok
Clause 4.2 - 4.2.2(Construction)	-	0	N/A
Clause 4.3 - 4.3.1(Whole Footwear)	-	0	N/A
Clause 4.3 - 4.3.2(Whole Footwear)	-	0	N/A
Clause 4.3 - 4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	0	N/A
Clause 4.3 - 4.3.4(Upper to Composite Sole Bond Performance(Applicable Only When the Sole is Composite))	-	0	N/A
Clause 4.3 - 4.3.5(Out Sole to Mid Sole (Multilayer) Bond)	-	0	N/A
Clause 4.3 - 4.3.7(Complete Shoe Flexing)	-	0	N/A
Clause 4.4, Table 1 ii)(Tear strength)	-	0	N/A
Clause 4.4, Table 1 iv)-a(Water Vapour Permeability)	-	0	N/A
Clause 4.4, Table 1 iv)-b(Water Vapour Coeffecient)	-	0	N/A
Clause 4.4, Table 1 v)(Stitch Tear Strength(Double Hole))	-	0	N/A
Clause 4.4, Table 2 i)(Breaking Strength)	-	0	N/A
Clause 4.4, Table 2 ii)(Elongation at break)	-	0	N/A
Clause 4.4, Table 2 iii)(Tear strength)	-	0	N/A
Clause 4.4, Table 2 v)-a(Water Vapour Permeability)	-	0	N/A
Clause 4.4, Table 2 v)-b(Water Vapour Coeffecient)	-	0	N/A
Clause 4.5, Table 3 i)(Tear strength)	-	0	N/A
Clause 4.5, Table 3 ii)(Abrasion Resistance)	-	0	N/A
Clause 4.5, Table 3 v)-a(Water Vapour Permeability)	-	0	N/A
Clause 4.5, Table 3 v)-b(Water Vapour Coeffecient)	-	0	N/A
Clause 4.6, Table 4 i)(Thickness)	-	0	N/A
Clause 4.6, Table 4 ii)(Abrasion Resistance)	-	0	N/A
Clause 4.6, Table 4 iv)-a(Water Absorption)	-	0	N/A
Clause 4.6, Table 4 iv)-b(Water Desorption)	-	0	N/A
Clause 4.7, Table 5 i)(Thickness)	-	0	N/A
Clause 4.7, Table 5 ii)(Abrasion Resistance)	-	0	N/A
Clause 4.7, Table 5 iii)-a(Water Absorption)	-	0	N/A
Clause 4.7, Table 5 iii)-b(Water Desorption)	-	0	N/A
Clause 4.8, Table 6 i)(Abrasion Resistance)	-	0	N/A
Clause 4.8, Table 6 ii)(Flexing Resistance)	-	0	N/A
Clause 4.8, Table 6 iii)(Hydrolysis Resistance)	-	0	N/A
Clause 4.9, Table 7 ii)(Split Tear strength)	-	0	N/A
Clause 4.9, Table 7 iii)(Heat shrinkage)	-	0	N/A

21 Jul, 2028

-
Included w.e.f. 10.07.2023. Included Washability test w.e.f. 28.02.2025 Amendment No.1 included w.e.f. 19.03.2024

9834

HEXIQON LABORATORY PRIVATE LIMITED, AHMEDABAD

7167306

IS 2556 : Part 6 (1995)

Vitreous sanitary appliances (Vitreous China): Part 6 specific requirements of urinals and partition plates

All Sizes and Grade

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4(Patterns and Size)	-	500	NA
Cl 5(Dimensions & Tolerances)	-	2000	NA
Cl 6(Construction)	-	200	NA
Cl 7(Finish)	-	50	NA
Cl 8(Cleanability Test)	-	700	NA

-
-

9835

HEXIQON LABORATORY PRIVATE LIMITED, AHMEDABAD

7167306

IS 2556 : Part 7 (1995)

Vitreous sanitary appliances (Vitreous China) - specification: Part 7 specific requirements of accessories for sanitary appliances

All Type and Sizes

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(General requirements-Application of Glazing-IS 2556 (Part 1))	-	200	None
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-General-Wavy finiah-IS 2556 (Part 1))	-	50	NA
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-General-Warpage -IS 2556 (Part 1))	-	100	NA
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-General-Discoloration-IS 2556 (Part 1))	-	50	NA
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-·Flushing surface and horizontal face of WC pans,iDI lurfaco and horizontal tace of rima of we pans, Squatting pans bidets and urinals-Spots. blisters and pinholes-IS 2556 (Part 1))	-	50	NA
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Flushing surface and horizontal face of WC pans,iDI lurfaco and horizontal tace of rima of we pans, Squatting pans bidets and urinals-Bubbles and specks-IS 2556 (Part 1))	-	50	NA
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Polishing Marks-IS 2556 (Part 1))	-	50	NA
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Spots, blisters and pinholes -IS 2556 (Part 1))	-	50	NA
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Bubbles and specks -IS 2556 (Part 1))	-	50	NA
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Polishing mark -IS 2556 (Part 1))	-	50	NA
3(General requirements-Thickness IS 2556 (Part 1))	-	100	NA
3(General requirements-PERFORMANCE REQUIllEMENTS-WARPAGE IS 2556 (Part 1))	-	100	NA
3(General requirements-PERFORMANCE REQUIllEMENTS-CRAZING IS 2556 (Part 1))	-	1200	NA
3(General requirements-PERFORMANCE REQUIllEMENTS-WATER ABSORBTION - Individual IS 2556 (Part 1))	-	1500	NA
3(General requirements-PERFORMANCE REQUIllEMENTS-WATER ABSORBTION - Average (IS 2556 (Part 1))	-	1500	NA
4(DIMENSIONS-STOP END CHANNEL WITH OUTLET-Type A )	-	1500	NA
4(DIMENSIONS-STOP END CHANNEL WITH OUTLET-Type B )	-	1500	NA
4(DIMENSIONS-PLAIN CHENNEL-Type A )	-	1500	NA
4(DIMENSIONS-PLAIN CHENNEL-Type B )	-	1500	NA
4(DIMENSIONS-PLAIN CHANNEL WITH SOCKET-Type A )	-	1500	NA
4(DIMENSIONS-PLAIN CHANNEL WITH SOCKET-Type B )	-	1500	NA
4(DIMENSIONS-FOOT REST )	-	1500	NA
4(DIMENSIONS-Traps for Long Pattern and Orilsa Pattern Pans )	-	1500	NA
4(DIMENSIONS-- Ovality permissible within the variation allowed for the dimensioN )	-	1500	NA
4(DIMENSIONS-- FLOOR TRAP)	-	1500	NA
4(DIMENSIONS-TYPICAL ILLUSTRATION OF VITRIOUS SHOWER ROSH)	-	1500	NA
5(CONSTRUCTION)	-	100	NA
6(FINISH)	-	100	NA
7.1(Performance Test)	-	2000	NA
7.2(FLUSHING TESTS-Toilet Paper Test-IS 2556(P-3))	-	400	NA
7.2(FLUSHING TESTS-Smudge Test-IS 2556(P-3))	-	400	NA
7.2(FLUSHING TESTS-Water Holding Capacity -Test-IS 2556(P-3))	-	600	NA
7.2(FLUSHING TESTS-Saw Dust Test-IS 2556(P-3))	-	400	NA
7.2(FLUSHING TESTS-Splash Test-IS 2556(P-3))	-	400	NA

-
-

9836

HEXIQON LABORATORY PRIVATE LIMITED, AHMEDABAD

7167306

IS 2556 : Part 3 (2004)

Vitreous Sanitary Appliances (Vitreous China) - - Part 3: Specific Requirements of Squatting Pans

Long/Orissa/Rural/ Any other Pattern declared

3750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 3 and Clause 5.2 of IS 2556(Part 1)(Lead solubility test)	-	800	None
Clause 3 and Clause 9.5 of IS 2556(Part 1)(Chemical Resistance Test)	-	1500	None
Clause 3 and Clause 9.6 of IS 2556(Part 1)(Resistance to staining and burning)	-	1000	None
3(General requirements-Application of Glazing-IS 2556 (Part 1))	-	200	None
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-General-Wavy finiah-IS 2556 (Part 1))	-	200	None
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-General-Warpage -IS 2556 (Part 1))	-	200	None
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-General-Discoloration-IS 2556 (Part 1))	-	200	None
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-·Flushing surface and horizontal face of WC pans,iDI lurfaco and horizontal tace of rima of we pans, Squatting pans bidets and urinals-Spots. blisters and pinholes-IS 2556 (Part 1))	-	200	None
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Flushing surface and horizontal face of WC pans,iDI lurfaco and horizontal tace of rima of we pans, Squatting pans bidets and urinals-Bubbles and specks-IS 2556 (Part 1))	-	200	None
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Polishing Marks-IS 2556 (Part 1))	-	200	None
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Spots, blisters and pinholes -IS 2556 (Part 1))	-	200	None
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Bubbles and specks -IS 2556 (Part 1))	-	200	None
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Polishing mark -IS 2556 (Part 1))	-	200	None
3(General requirements-Thickness IS 2556 (Part 1))	-	100	None
3(General requirements-PERFORMANCE REQUIllEMENTS-WARPAGE IS 2556 (Part 1))	-	100	None
3(General requirements-PERFORMANCE REQUIllEMENTS-CRAZING IS 2556 (Part 1))	-	1200	None
3(General requirements-PERFORMANCE REQUIllEMENTS-WATER ABSORBTION - Individual IS 2556 (Part 1))	-	1500	None
3(General requirements-PERFORMANCE REQUIllEMENTS-WATER ABSORBTION - Average (IS 2556 (Part 1))	-	1500	None
3(General requirements-PERFORMANCE REQUIllEMENTS-MODULUS OF RUPTURE IS 2556 (Part 1))	-	600	None
4(PATTERNS )	-	50	None
4(SIZE)	-	100	None
5.1(CONSTRUCTION)	-	50	None
6-Table 1(DIMENSIONS AND TOLERANCES-A)	-	200	None
6.1-Table 1(DIMENSIONS AND TOLERANCES-B)	-	200	None
6.1-Table 2(DIMENSIONS AND TOLERANCES-F)	-	200	None
6.1-Table 3(DIMENSIONS AND TOLERANCES-H)	-	200	None
6.1-Table 4(DIMENSIONS AND TOLERANCES-J)	-	200	None
6.1-Table 5(DIMENSIONS AND TOLERANCES-Slope of bottom of pan)	-	200	None
6.1-Table 6(DIMENSIONS AND TOLERANCES-L)	-	200	None
6.1-Table 7(DIMENSIONS AND TOLERANCES-N)	-	200	None
6.1-Table 8(DIMENSIONS AND TOLERANCES-P)	-	200	None
6.2-Table 2(DIMENSIONS AND TOLERANCES-C)	-	200	None
6.2-Table 3(DIMENSIONS AND TOLERANCES-D)	-	200	None
6.2-Table 4(DIMENSIONS AND TOLERANCES-E)	-	200	None
6.2-Table 5(DIMENSIONS AND TOLERANCES-G)	-	200	None
6.2-Table 6(DIMENSIONS AND TOLERANCES-K)	-	200	None
6.2-Table 7(DIMENSIONS AND TOLERANCES-M)	-	200	None
6.2(DIMENSIONS AND TOLERANCES-top surface variation)	-	200	None
7(FINLSH)	-	200	None
8.1(FLUSHING TESTS-Toilet Paper Test)	-	400	None
8.2(FLUSHING TESTS-Smudge Test)	-	400	None
8.3(FLUSHING TESTS-Water Holding Capacity Test)	-	600	None
8.4(FLUSHING TESTS-Saw Dust Test)	-	400	None
8.5(FLUSHING TESTS-Splash Test)	-	400	None

-
-

9837

HEXIQON LABORATORY PRIVATE LIMITED, AHMEDABAD

7167306

IS 4457 (2007)

Ceramic unglazed vitreous acid resisting tiles - Specification (Second Revision)

Thickness 5.0 mm to 20 mm

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 5, Table 1 - iv -a (Resistance to Chemicals - Annex F)	-	2500	NA
Cl. 5, Table 1 - iv -b (Resistance to conc. HNO3 and conc. H2SO4 - Annex G)	-	2000	NA
3(MANUFACTURE)	-	500	NA
4(MANUFACTURE)	-	500	NA
5(MANUFACTURE)	-	500	NA
4.1(DIMENSIONS AND TOLERANCES- Size)	-	1000	NA
4.2(DIMENSIONS AND TOLERANCES- Thickness)	-	1000	NA
5-Table 1(i)-a(REQUIREMENTS-Dimensions and Surface Quality-Length)	-	1000	NA
5-Table 1(i)-a(REQUIREMENTS-Dimensions and Surface Quality-Width)	-	1000	NA
5-Table 1(i)-b(REQUIREMENTS-Dimensions and Surface Quality-Thickness)	-	1000	NA
5-Table 1(i)-c(REQUIREMENTS-Dimensions and Surface Quality-Straightness of sided)	-	1500	NA
5-Table 1(i)-d(REQUIREMENTS-Dimensions and Surface Quality-Rectangularity)	-	1500	NA
5-Table 1(i)-e(REQUIREMENTS-Dimensions and Surface Quality-Surface flatness-Centre curvature)	-	2000	NA
5-Table 1(i)-e(REQUIREMENTS-Dimensions and Surface Quality-Surface flatness-Edge curvature)	-	2000	NA
5-Table 1(i)-e(REQUIREMENTS-Dimensions and Surface Quality-Surface flatness-Warpage)	-	2000	NA
5-Table 1(ii)(REQUIREMENTS-Surface Quality)	-	200	NA
5-Table 1(iii)(REQUIREMENTS-Physical Properties-Water absorption by weigh(Average))	-	1500	NA
5-Table 1(iii)-a(REQUIREMENTS-Physical Properties-Water absorption by weigh(Indivisual))	-	1500	NA
5-Table 1(iii)-b-1(REQUIREMENTS-Physical Properties-Breaking strengrh(Thickness>=7.5mm))	-	700	NA
5-Table 1(iii)b-2(REQUIREMENTS-Physical Properties-Breaking strengrh(Thickness <7.5mm))	-	700	NA
5-Table 1(iii)-c(REQUIREMENTS-Physical Properties-Modulus of rupture(Average))	-	700	NA
5-Table 1(iii)-c(REQUIREMENTS-Physical Properties-Modulus of rupture(Individual))	-	700	NA
5-Table 1(iii)-d(REQUIREMENTS-Physical Properties-Abrusion resistance)	-	2000	NA

-
-

9838

Delta Testing and Research Laboratories Private Limited (C5)

9179506

IS 15833 (2009)

Stainless Steel Tower Bolts -specification

All Grade / Type / Size / Designation

5500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.2(Carbon Content)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4.2(Silicon)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4.2(Manganese)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4.2(nickel)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4.2(Chromium)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4.2(Sulphur)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4.2(Phosphorus)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4.2(Carbon Content)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4.2(Silicon)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4.2(Manganese)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4.2(nickel)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4.2(Chromium)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4.2(Sulphur)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4.2(Phosphorus)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4.2(Mech)(Phosphorus)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4.2(Mech)(Sulphur)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4.2(Mech)(Chromium)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4.2(Mech)(nickel)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4.2(Mech)(Manganese)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4.2(Mech)(Silicon)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4.2(Mech)(Carbon Content)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 7(0)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6(DIMENSIONS)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6(DIMENSIONS)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6(DIMENSIONS)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6(DIMENSIONS)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6(DIMENSIONS)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6(DIMENSIONS)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6(DIMENSIONS)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6(DIMENSIONS)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6(DIMENSIONS)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6(DIMENSIONS)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 5(MANUFACTURE)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 4(MATERIAL)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 3(NOMINAL SIZES)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 3(NOMINAL SIZES)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
-

9839

Testtex India Laboratories Private Limited, Noida

8138306

IS 11226 (1993)

Leather safety footwear having direct moulded rubber sole specification (First Revision)

Leather safety footwear having direct moulded rubber so

24750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(REQUIREMENTS)	-	0	-
5.2(Materials)	-	0	-
5.2.1(Materials)	-	7000	Thickness, Tensile strength, El. at Break, Stitch tear strength, Distension and strength of grain, Flexural endurance,, Tongue tear, C.F to Rubbing, Solvent extractable substances, Chromic Oxide, Water soluble matter, pH of water solubles, Heat Shrinkage
5.2.1.1(Materials)	-	0	-
5.2.2(Materials)	-	10800	Thickness, Density, Water absorption, Tensile str. - Dry & Wet Condition, El. at break, Area shrinkage, Linear shrinkage, Stitch tear str, Flexing endurance, Mineral ash, Water soluble matter, Lthr forming material, Surface Water Absorption, Crack resis.
5.2.3(Materials)	-	9000	Materials (Stiffener) - First dry collapsing load Hardness, Resilience, Moisture resistance, Initial dry area shape retention, Area shape retention after 10th collapse), Peel Strength
5.2.4(Materials)	-	18100	Tests as per IS 3840 LP 1, 6, 9, 8, LC-4, 10, 8, 18, 21, 5, Apdx A, IS 14816 LC3, LC - 4, LC 2, IS 14575,
5.2.5(Materials)	-	1800	Thread - Length (M/kg), Breaking Strength,
5.2.6.1(Materials)	-	500	-
5.2.6.2(Materials)	-	0	-
5.2.6.3(Materials)	-	300	-
5.2.7(Materials)	-	300	-
5.2.8(Materials)	-	300	-
5.2.9(Materials)	-	300	-
5.2.10(Materials)	-	3900	Lace - Length, Breaking Strength, C. F. to Washing, C. F. to Light, Slip Resistance, Detection of Sulphur Dye
5.2.11(Materials)	-	500	-
5.2.11.1(Materials)	-	300	-
5.2.11.2(Materials)	-	3500	Tensile Strength, Elongation at Break, Relative Density, Change in Volume, Flexing Resistance
5.2.11.3(Materials)	-	1500	-
5.3(Components)	-	600	-
5.4( Manufacture )	-	0	-
5.4.1( Manufacture )	-	0	-
5.4.8(Workmanship and Finish)	-	500	-
5.5(Mass)	-	300	-
5.6(Performance Test)	-	2000	-
5.7(Adhesion Test on Moulded Bottoms)	-	1000	-
7(MARKING)	-	0	-
5.7(Toe adhesion )	-	0	Clause Repeated
5.6.(Toe Impact test)	-	0	Clause Repeated
5.5(Mass per pairs)	-	0	Clause Repeated
5.4.8(Leg height)	-	0	Clause Repeated
5.4(Dimension )	-	0	Clause Repeated
5.3 & 5.4.2(Thickness of components )	-	0	Clause Repeated
5.2.11.2(Flexing resistance)	-	0	Clause Repeated
5.2.11.2(Resistance to Fuel Oil)	-	0	Clause Repeated
5.2.11.2(Elongation at break)	-	0	Clause Repeated
5.2.11.2(Tensile Strength)	-	0	Clause Repeated
5.2.11.2(Hardness (Shore A))	-	0	Clause Repeated
5.2.11(Hardness (IRHD)-after ageing)	-	0	Clause Repeated
5.2.11(Flexing resistance)	-	0	Clause Repeated
5.2.11(Elongation at break)	-	0	Clause Repeated
5.2.11(Tensile Strength)	-	0	Clause Repeated
5.2.11(Hardness (IRHD))	-	0	Clause Repeated
5.2.11(Relative density )	-	0	Clause Repeated
5.2.6(Materials)	-	0	Clause Repeated

-
Included w.e.f 26.11.24

9840

Delta Testing and Research Laboratories Private Limited (C5)

9179506

IS 4621 (1975)

Specification for indicating bolts for use in public baths and lavatories (First Revision)

All type of Grade / Type / Size / Designation

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4(DIMENSIONS AND TOLERANCES)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7(WORKMANSHIP AND FINISH)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4.1(Dimension and tolerance)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 5.2 Table 2(i)(Body, knob and indicating spindle)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 5.2 Table 2(ii)(Indicating disc)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 5.2 Table 2(iii)(Gears)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7(Workmanship and finish)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 8(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 9(Packing)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-6(Manufacture)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.0 Table -2(Tensile strength)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
IS 1868, Cl 10.0(Sulphur Dioxide test)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl .5 Table-2(Elongation)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
IS 1868, cl 14(Resistance to crazing deformation)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
IS 1868, cl. 16(Light Reflection Property)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
IS 1868, cl. 15.0(Fastness of light)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
IS 1868, cl. 17.0(Electrical Breakdown Potential)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
IS 1868, cl. 18(continuity of the Anodizing Coating)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
IS 1868, cl. 12.0(Corrosion Resistance)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
IS 1868, cl. 12(CASS Test)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
IS 1868, cl. 12(AAS Test)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
IS 1868, cl. 13.0(Abrasion Resistance)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number