BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15612 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

9961

Central Institute of Petrochemicals Engineering & Technology (CIPET), Chandrapur

7173804

IS 17399 (2020)

Textiles - Polypropylene ( PP )/ High Density Polyethylene ( HDPE ) Laminated Woven Sacks for Mail Sorting, Storage, Transport and Distribution - Specification

35kg (Type I, II & III)

29780 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(MANUFACTURE - Raw Materials)	-	2000.0	GST charges Extra
5.2(MANUFACTURE - Fabric for PP tapes & for HDPE tapes)	-	2000.0	GST charges Extra
5.2- Table 1- i)("REQUIREMENTS - Inside dimensions a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm")	-	1500.0	(Bottom panel - 500.0, Open Top - 500.0 & Height - 500.0) (GST charges Extra)
5.2- Table 1- ii)(REQUIREMENTS - Ends per dm)	-	500.0	GST charges Extra
5.2- Table 1- iii)(REQUIREMENTS - Picks per dm)	-	500.0	GST charges Extra
5.2- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g)	-	500.0	GST charges Extra
5.2- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf) a) Lengthwise b) Widthwise)	-	3200.0	1100.0x2=2200.0 (Lengthwise & Widthwise) + 1000.0 - Specimen Preparation Charges) GST charges Extra
5.2- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min, N2), (kgf))	-	1100.0	GST charges Extra
5.2- Table 1- vii)("REQUIREMENTS - Elongation at break of fabric, percent: a) Lengthwise b) Widthwise")	-	0.00	-
5.2- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks)	-	1200.0	GST charges Extra
5.3(Lamination)	-	2000.0	GST charges Extra
5.4(Sack Fabrication)	-	500.0	GST charges Extra
5.5(Capacity)	-	500.0	GST charges Extra
6.1- Table 1- i)(REQUIREMENTS - Inside dimensions a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm)	-	0.00	-
6.1- Table 1- ii)(REQUIREMENTS - Ends per dm)	-	0.00	-
6.1- Table 1- iii)(REQUIREMENTS - Picks per dm)	-	0.00	-
6.1- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g)	-	0.00	-
6.1- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf))	-	0.00	-
6.1- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min)	-	0.00	-
6.1- Table 1- vii)(REQUIREMENTS - Elongation at break of fabric, percent a) Lengthwise b) Widthwise)	-	0.00	-
6.1- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks)	-	0.00	-
6.4(UV Resistance Test)	-	13380.0	UV Resistance- 10180.0 + breaking strength-3200.0 (Lengthwise-1100.0 & Widthwise-1100.0 +1000.0-Sample Preparation Charges) (GST charges Extra)
7(PRINTING, PACKAGING AND MARKING)	-	500.0	GST charges Extra
8(ATMOSPHERIC CONDITIONS FOR SAMPLE CONDITIONING AND TESTING)	-	400.0	GST charges Extra
Clause 5.1(Raw Materials)	-	0.00	-
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	0.00	-
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	0.00	-
"Clause 5.2 Table 1(ii)"(Ends per dm)	-	0.00	-
"Clause 5.2 Table 1(iii)"(Picks per dm)	-	0.00	-
"Clause 5.2 Table 1(iv)"("Mass of laminated sack, g")	-	0.00	-
"Clause 5.2 Table 1(v)"("Breaking strength of laminated fabric")	-	0.00	-
"Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam)	-	0.00	-
"Clause 5.2 Table 1(vii)"("Elongation at break of fabric, percent:")	-	0.00	-
"Clause 5.2 Table 1(viii)"("Ash content, Max, percent")	-	0.00	-
Clause 5.3(Lamination with a thin film of polypropylene)	-	0.00	-
Clause 5.4(Sack Fabrication)	-	0.00	-
Clause 5.1(Raw Materials)	-	0.00	-
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	0.00	-
"Clause 5.2 Table 1(ii)"(Ends per dm)	-	0.00	-
"Clause 5.2 Table 1(iii)"(Picks per dm)	-	0.00	-
"Clause 5.2 Table 1(iv)"("Mass of laminated sack, g")	-	0.00	-
"Clause 5.2 Table 1(v)"("Breaking strength of laminated fabric")	-	0.00	-
"Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam)	-	0.00	-
"Clause 5.2 Table 1(vii)"("Elongation at break of fabric, percent:")	-	0.00	-
"Clause 5.2 Table 1(viii)"("Ash content, Max, percent")	-	0.00	-
Clause 5.3(Lamination with a thin film of polypropylene)	-	0.00	-
Clause 7.3(Marking on Sacks)	-	0.00	-
Clause 7.3(Marking on Sacks)	-	0.00	-

10 Sep, 2029

-
Included w.e.f. 20.08.2024

9962

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 17399 (2020)

Textiles - Polypropylene ( PP )/ High Density Polyethylene ( HDPE ) Laminated Woven Sacks for Mail Sorting, Storage, Transport and Distribution - Specification

42280.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(MANUFACTURE - Raw Materials)	-	1050.00	-
5.2(MANUFACTURE - Fabric for PP tapes & for HDPE tapes)	-	7350.00	Fabric Fabric Construction 500 Tape Width 500 Identification (Chemical Analysis) 1050 Melt flow rate (MFR) 1100 Linear Density 700 Tanacity 1100 Elongation of the Tape Thickness of the Tape 500
5.2- Table 1- i)("REQUIREMENTS - Inside dimensions a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm")	-	500.00	-
5.2- Table 1- ii)(REQUIREMENTS - Ends per dm)	-	500.00	-
5.2- Table 1- iii)(REQUIREMENTS - Picks per dm)	-	500.00	-
5.2- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g)	-	500.00	-
5.2- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf) a) Lengthwise b) Widthwise)	-	2700.00	Avg. breaking strength of Fabric (min) a. Length wise 1100 500 b. Width wise 1100
5.2- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min, N2), (kgf))	-	1100.00	-
5.2- Table 1- vii)("REQUIREMENTS - Elongation at break of fabric, percent: a) Lengthwise b) Widthwise")	-	0.00	ALREADY CHARGE TAKEN.
5.2- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks)	-	1200.00	-
5.3(Lamination)	-	2050.00	Mass of lamination film 500 Total Mass of Laminated woven fabric 500 Material Identification of lamination 1050
5.4(Sack Fabrication)	-	1500.00	Sacks Construction 500 Gromet construction & dimensions 1000
5.5(Capacity)	-	500.00	-
6.1- Table 1- i)(REQUIREMENTS - Inside dimensions a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm)	-	1500.00	Inside dimensions a) Bottom panel (L × W), mm 500 b) Open top (L × W), mm 500 c) Height (H), mm 500
6.1- Table 1- ii)(REQUIREMENTS - Ends per dm)	-	0.00	ALREADY CHARGE TAKEN
6.1- Table 1- iii)(REQUIREMENTS - Picks per dm)	-	0.00	ALREADY CHARGE TAKEN
6.1- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g)	-	0.00	ALREADY CHARGE TAKEN
6.1- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf))	-	0.00	ALREADY CHARGE TAKEN
6.1- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min)	-	0.00	ALREADY CHARGE TAKEN
6.1- Table 1- vii)(REQUIREMENTS - Elongation at break of fabric, percent a) Lengthwise b) Widthwise)	-	0.00	ALREADY CHARGE TAKEN
6.1- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks)	-	0.00	ALREADY CHARGE TAKEN
6.4(UV Resistance Test)	-	10180.00	-
7(PRINTING, PACKAGING AND MARKING)	-	0.00	-
8(ATMOSPHERIC CONDITIONS FOR SAMPLE CONDITIONING AND TESTING)	-	0.00	-
Clause 5.1(Raw Materials)	-	0.00	ALREADY CHARGE TAKEN
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	0.00	ALREADY CHARGE TAKEN
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	0.00	ALREADY CHARGE TAKEN
"Clause 5.2 Table 1(ii)"(Ends per dm)	-	0.00	ALREADY CHARGE TAKEN
"Clause 5.2 Table 1(iii)"(Picks per dm)	-	0.00	ALREADY CHARGE TAKEN
"Clause 5.2 Table 1(iv)"("Mass of laminated sack, g")	-	0.00	ALREADY CHARGE TAKEN
"Clause 5.2 Table 1(v)"("Breaking strength of laminated fabric")	-	0.00	ALREADY CHARGE TAKEN
"Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam)	-	0.00	ALREADY CHARGE TAKEN
"Clause 5.2 Table 1(vii)"("Elongation at break of fabric, percent:")	-	0.00	ALREADY CHARGE TAKEN
"Clause 5.2 Table 1(viii)"("Ash content, Max, percent")	-	0.00	ALREADY CHARGE TAKEN
Clause 5.3(Lamination with a thin film of polypropylene)	-	0.00	ALREADY CHARGE TAKEN
Clause 5.4(Sack Fabrication)	-	0.00	ALREADY CHARGE TAKEN
Clause 7.3(Marking on Sacks)	-	0.00	ALREADY CHARGE TAKEN
Clause 5.1(Raw Materials)	-	0.00	ALREADY CHARGE TAKEN
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	0.00	ALREADY CHARGE TAKEN
"Clause 5.2 Table 1(ii)"(Ends per dm)	-	0.00	ALREADY CHARGE TAKEN
"Clause 5.2 Table 1(iii)"(Picks per dm)	-	0.00	ALREADY CHARGE TAKEN
"Clause 5.2 Table 1(iv)"("Mass of laminated sack, g")	-	0.00	ALREADY CHARGE TAKEN
"Clause 5.2 Table 1(v)"("Breaking strength of laminated fabric")	-	0.00	ALREADY CHARGE TAKEN
"Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam)	-	0.00	ALREADY CHARGE TAKEN
"Clause 5.2 Table 1(vii)"("Elongation at break of fabric, percent:")	-	0.00	ALREADY CHARGE TAKEN
"Clause 5.2 Table 1(viii)"("Ash content, Max, percent")	-	0.00	ALREADY CHARGE TAKEN
Clause 5.3(Lamination with a thin film of polypropylene)	-	0.00	ALREADY CHARGE TAKEN
Clause 7.3(Marking on Sacks)	-	0.00	ALREADY CHARGE TAKEN

24 Apr, 2027

-
Included w.e.f. 20.08.2024

9963

Central Institute of Petrochemicals Engineering & Technology (CIPET), Chandrapur

7173804

IS 16703 (2017)

Textiles - High density polyethylene (HDPE) polypropylene (PP) woven sacks for packaging of 25 kg polymer materials - Specification

25kg

26180.0 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Mass of Bale)	-	500.0	GST Charges Extra
5.2 Table 1(Dimensions)	-	500.0	GST Charges Extra
5.2 Table 1(Dimensions)	-	0.00	-
5.2 Table 1(Dimensions)	-	0.00	-
5.2 Table 1(Dimensions)	-	0.00	-
5.2 Table 1(Ends per dm)	-	500.0	GST Charges Extra
5.2 Table 1(Picks per dm)	-	500.0	GST Charges Extra
5.2 Table 1(Mass of sack, Gusseted type, g - IS 1964)	-	500.0	GST Charges Extra
5.2 Table 1(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N) (kgf): - IS 1969 (Part 1))	-	1600.0	Breaking Strength (Lengthwise)-1100.0 + 500.0 (Sample preparation charges) (GST Charges Extra)
5.2 Table 1(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N2) (kgf): - IS 1969 (Part 1))	-	1600.0	Breaking Strength (Widthwise)-1100.0 + 500.0 (Sample preparation charges) (GST Charges Extra)
5.2 Table 1(Breaking strength of bottom seam (Ravelled strip method), Min, N) (kgf) - IS 9030)	-	1600.0	Breaking Strength of Bottom Seam-1100.0+500.0 (Sample preparation charges) (GST Charges Extra)
5.2 Table 1(Elongation at break of fabric (Ravelled strip method), percent : IS 1969 (Part 1))	-	0.00	Elongation at break (Lengthwise)
5.2 Table 1(Elongation at break of fabric (Ravelled strip method), percent : IS 1969 (Part 1))	-	0.00	Elongation at break (Widthwise)
5.2 Table 1(Drop impact strength)	-	1600.0	Test Charges 1100.0 + 500.0 (Sample Preparation Charges) (GST Charges Extra)
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,a) For UV stabilized sacks)	-	1200.0	GST Charges Extra
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,b) For non- UV stabilized sacks)	-	0.00	-
4.6(Capacity)	-	500.0	GST Charges Extra
4.3.1(Bottom Seam)	-	500.0	GST Charges Extra
4.3(Sacks)	-	500.0	GST Charges Extra
4.2,5.1,5.2,5.3,5.4(Breaking strenght after U.V. Exposure (Warp/Weft))	-	3200.0	Test Charges 1100.0x2=2200.00(Lengthwise & Widthwise) + 1000.0 (Sample Preparation Charges-Lengthwise & Widthwise) (GST Charges Extra)
4.2,5.1,5.2,5.3,5.4,(UV Resistance (192 hrs)(100 x 65+92x40))	-	0.00	-
4.2(Linear Density)	-	700.0	GST Charges Extra
4.2(Width of tape)	-	500.0	GST Charges Extra
4.6(Capacity)	-	0.00	-
4.3.1(Bottom Seam)	-	0.00	-
4.3(Sacks)	-	0.00	-
4.2,5.1,5.2,5.3,5.4(Breaking strenght after U.V. Exposure (Warp/Weft))	-	0.00	-
4.2,5.1,5.2,5.3,5.4,(UV Resistance (192 hrs)(100 x 65+92x40))	-	10180.0	GST Charges Extra
4.2(Linear Density)	-	0.00	-
4.2(Width of tape)	-	0.00	-

10 Sep, 2029

-
Included w.e.f. 20.08.2024

9964

AANKAN CALIBRATION AND TESTING CENTRE LLP, DANTLI

7184406

IS 1659 (2004)

Block boards - Specification (Fourth Revision)

GRADE:BWP/MR,TYPE:DEC/COM,THICKNESS:30 mm Max.

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.2.6(Spot test - Annexure L)	-	1900	OK
9.2.5(Modulus of elasticity - MINIMUM INDIVIDUAL - Annexure K)	-	500	OK
9.2.5(Modulus of elasticity - AVERAGE - Annexure K)	-	500	OK
9.2.5(Modulus of rupture - MINIMUM INDIVIDUAL - Annexure K)	-	500	OK
9.2.5(Modulus of rupture - AVERAGE - Annexure K)	-	500	OK
9.2.4(Mycological Test [for MR grade only] - Annexure J)	-	1900	OK
9.2.3(Adhesion of Plies - Annexure H)	-	500	OK
9.2.2 (Resistance to water - Annexure G, Annexure H [For MR Grade])	-	500	OK
9.2.2 (Resistance to water - Annexure G, Annexure H [For BWP grade])	-	500	OK
9.2.1(Dimensional Changes caused by humidity Change in local planeness - Annexure F)	-	500	OK
9.2.1(Dimensional Changes caused by humidity - Delamination - Annexure F)	-	500	OK
9.2.1(Dimensional Changes caused by humidity - Change in thickness - at 40% RH - Annexure F)	-	500	OK
9.2.1(Dimensional Changes caused by humidity - Change in Thickness - at 90% RH - Annexure F)	-	500	OK
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 40% RH - Annexure F)	-	500	OK
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 90% RH - Annexure F)	-	500	OK
7.3(Dimensional Requirements - Variation in thickness - Annexure E)	-	200	OK
7.3(Dimensional Requirements - Squareness - Annexure D)	-	490	OK
7.3(Dimensional Requirements - Edge Straightness - Annexure D)	-	200	OK
7.3(Dimensional Requirements - Thickness - Annexure E)	-	200	OK
7.3(Dimensional Requirements - Width - 8.1.4)	-	200	OK
7.3(Dimensional Requirements - Length - 8.1.4)	-	200	OK
8.1.3, 6.3.3, IS 1328(Visual Inspection - Permissible Defects - IS 1328 [test method for DECORATIVE type])	-	200	OK
8.1.3, 6.3.3, IS 303(Visual Inspection - Permissible Defects - IS 303 [test method for COMMERCIAL type])	-	200	OK
9.2.6 (mechanical)(Spot test - Annexure L)	-	1900	OK
cl. 11(marking)	-	200	OK
cl. 11.1(marking - BIS certification marking)	-	100	OK
Cl-10(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	0	OK
6.2(Core- Moisture & Width)	-	0	OK
6.3(Cross Bands and Faces- Moisture content)	-	0	OK
6.3.1(Thickness of cross band and face veneers)	-	0	OK

17 Mar, 2028

-
-

9965

AANKAN CALIBRATION AND TESTING CENTRE LLP, DANTLI

7184406

IS 848 (2006)

Synthetic resin adhesives for plywood (Phenolic And Aminoplastic) - Specification (Second Revision)

TYPE:MR,BR,BWR, DESCRIPTION:LIQUID/POWDER/FILM

6967 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4 Table (i)(BWP (BOiling WaterProof))	-	4200	OK
4 Table (i)(BWR (Boiling Water Resistant))	-	4200	OK
4 Table (i)(MR (Moisture Ressistant))	-	4200	OK
5,7.4(Keeping Quality (Resistance to heat Polymerization))	-	0	0
7.4(Acidity and Alkalinity ( pH))	-	500	OK

17 Mar, 2028

-
-

9966

CIPET, Hajipur

5118334

IS 11652 (2017)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg cement – Specification (third revision)

26300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	500	25% Discount for BIS
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	500	25% Discount for BIS
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	500	25% Discount for BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	0	Already Included.
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	0	Already Included.
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	0	Already Included.
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	0	Already Included.
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	500	Visual. 25% Discount for BIS.
4.1(Raw Material )	-	1050	25% Discount for BIS.
4.2 (Fabric)	-	500	Fabric Construction. 25% Discount for BIS.
4.2 (Linear Density, 900 denier)	-	700	25% Discount for BIS.
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	500	25% Discount for BIS.
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	0	Already Included
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	0	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
4.3(Sacks)	-	500	Sack Construction. 25% Discount for BIS.
4.4(Seam )	-	500	25% Discount for BIS.
4.4(Seam )	-	0	-
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	500	25% Discount for BIS.
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	0	-
4.4(Seam The stitching shall be done with double fold over seam to)	-	0	-
4.4(to a depth of minimum 25 mm, so that so that)	-	0	-
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	0	-
4.4(The number of stitches/dm shall be 14 ± 2.)	-	1050	Stitching Thread Material Identification. 25% Discount for BIS.
4.4(Seam)	-	0	-
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	0	-
4.4(Seam)	-	0	-
4.4(Seam)	-	0	-
4.4(Seam)	-	0	-
4.5(Lamination )	-	0	-
4.5(Lamination )	-	0	-
4.5(Lamination )	-	0	-
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	0	-
4.7(Valve for Filling of Sacks)	-	0	-
4.7(There shall be a double fold at the top seam and)	-	0	-
4.7(and then stitching shall be done through six layers.)	-	0	-
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	500	25% Discount for BIS.
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	0	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	0	-
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	0	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	1100	Lengthwise. 25% Discount for BIS.
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	1100	Width wise. 25% Discount for BIS.
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	1100	Avg. Breaking Strength & Elongation at Break -Top Seam. 25% Discount for BIS.
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	1100	Avg. Breaking Strength & Elongation at Break -Bottom Seam. 25% Discount for BIS.
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	0	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	0	-
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	1100	25% Discount for BIS.
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	1200	25% Discount for BIS.
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	0	25% Discount for BIS.
5/5.6 (UV Resistance, )	-	12380	(Rs 10180 (Specimen Charge - 192 Hr UV Exposure) + 1100 (Lengthwise Breaking Strength) + 1100 (Width-wise Breaking Strength) Optional 25% Discount for BIS.
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	0	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	0	-
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	1100	Tenacity . 25% Discount for BIS.
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	0	-
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	0	-
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	0	-
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	0	-
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	0	-
4.1(Raw Material )	-	1200	Ash Content . 25% Discount for BIS.
4.2 (Fabric)	-	0	-
4.2 (Linear Density, 900 denier)	-	700	Density 25% Discount for BIS.
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	1050	Material Identification 25% Discount for BIS.
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	0	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	0	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	1100	MFR (Melt Flow Rate) 25% Discount for BIS.
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	700	Dimensional Stability 25% Discount for BIS.
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	700	Dimensional Stability 25% Discount for BIS.
4.3(Sacks)	-	0	-
4.4(Seam )	-	500	Stitching Construction 25% Discount for BIS.
4.4(Seam )	-	2000	Presence of UV stabilizer - Stitching Thread 25% Discount for BIS.
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	0	-
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	0	-
4.4(Seam The stitching shall be done with double fold over seam to)	-	0	-
4.4(to a depth of minimum 25 mm, so that so that)	-	0	-
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	0	-
4.4(The number of stitches/dm shall be 14 ± 2.)	-	0	-
4.4(Seam)	-	700	Linear Density of stitching Thread. 25% Discount for BIS.
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	0	-
4.4(Seam)	-	500	Capacity
4.4(Seam)	-	0	-
4.4(Seam)	-	0	-
4.5(Lamination )	-	0	-
4.5(Lamination )	-	1050	Material Identification. 25% Discount for BIS.
4.5(Lamination )	-	500	Picks per dm. 25% Discount for BIS.
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	0	-
4.7(Valve for Filling of Sacks)	-	0	-
4.7(There shall be a double fold at the top seam and)	-	0	-
4.7(and then stitching shall be done through six layers.)	-	0	-
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	0	-
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	0	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	0	-
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	0	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	0	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	0	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	0	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	0	-
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	0	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	0	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	0	-
5/5.6 (UV Resistance, )	-	0	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	0	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	0	-
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	0	-
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	0	-
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	0	-
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	0	-
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	0	-
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	0	-
4.1(Raw Material )	-	0	-
4.2 (Fabric)	-	0	-
4.2 (Linear Density, 900 denier)	-	0	-
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	0	-
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	0	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	0	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
4.3(Sacks)	-	0	-
4.4(Seam )	-	0	-
4.4(Seam )	-	0	-
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	0	-
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	0	-
4.4(Seam The stitching shall be done with double fold over seam to)	-	0	-
4.4(to a depth of minimum 25 mm, so that so that)	-	0	-
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	0	-
4.4(The number of stitches/dm shall be 14 ± 2.)	-	0	-
4.4(Seam)	-	0	-
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	0	-
4.4(Seam)	-	0	-
4.4(Seam)	-	0	-
4.4(Seam)	-	0	-
4.5(Lamination )	-	0	-
4.5(Lamination )	-	0	-
4.5(Lamination )	-	0	-
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	0	-
4.7(Valve for Filling of Sacks)	-	0	-
4.7(There shall be a double fold at the top seam and)	-	0	-
4.7(and then stitching shall be done through six layers.)	-	0	-
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	0	-
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	0	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	0	-
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	0	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	0	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	0	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	0	-
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	0	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	0	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	0	-
5/5.6 (UV Resistance, )	-	0	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	0	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	0	-
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	0	-
Cl-5 Fig. 1- Table 1- Sr. no. ii(Ends per dm - Annex B 40 ± 2)	-	0	-
Cl-5 Fig. 1- Table 1-Sr. no. iii(Picks per dm-Annex B 40 ± 2)	-	0	-
Cl-5, Fig. 1- Table 1- Sr. no. i(Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm)	-	0	-
Cl-5, Fig. 1- Table 1- Sr. no. i(Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm)	-	0	-
Cl-5, Fig. 1- Table 1-Sr. no. i(Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm)	-	0	-
Cl-5, Fig. 1, Table 1(i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm)	-	0	-
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	0	-
4.1(Raw Material )	-	0	-
4.2 (Fabric)	-	0	-
4.2 (Linear Density, 900 denier)	-	0	-
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	0	-
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	0	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	0	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	0	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
4.3(Sacks)	-	0	-
4.4(Seam )	-	0	-
4.4(Seam )	-	0	-
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	0	-
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	0	-
4.4(Seam The stitching shall be done with double fold over seam to)	-	0	-
4.4(to a depth of minimum 25 mm, so that so that)	-	0	-
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	0	-
4.4(The number of stitches/dm shall be 14 ± 2.)	-	0	-
4.4(Seam)	-	0	-
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	0	-
4.4(Seam)	-	0	-
4.4(Seam)	-	0	-
4.4(Seam)	-	0	-
4.5(Lamination )	-	0	-
4.5(Lamination )	-	0	-
4.5(Lamination )	-	0	-
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	0	-
4.7(Valve for Filling of Sacks)	-	0	-
4.7(There shall be a double fold at the top seam and)	-	0	-
4.7(and then stitching shall be done through six layers.)	-	0	-
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	0	-
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	0	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	0	-
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	0	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	0	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	0	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	0	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	0	-
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	0	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	0	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	0	-
5/5.6 (UV Resistance, )	-	0	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	0	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	0	-

07 Oct, 2028

-
Included w.e.f. 20.08.2024

9967

AANKAN CALIBRATION AND TESTING CENTRE LLP, DANTLI

7184406

IS 710 (2024)

MARINE PLYWOOD - SPECIFICATION (Third Revision)

Class: E1/E2,Thickness: max.25 mm

17500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Timber)	-	0	K
Cl-4.2(Adhesive)	-	8000	OK
Cl-5.1(Veneers)	-	0	OK
Cl-5.2.1(Glueing)	-	0	OK
Cl -5.2.2(Thickness of Veneers)	-	0	0K
Cl - 5.2.3.1(Joint in Veneers)	-	0	0K
Cl - 5.2.3.2(Edge joints)	-	0	0K
Cl - 5.2.3.3(End joints)	-	0	OK
Cl - 5.2.3.4(Scarf joints)	-	0	OK
Cl - 5.2.4(Grain Direction)	-	0	OK
Cl-5.3(Treatment)	-	0	OK
Cl-5.4(Moisture Content)	-	0	OK
Cl-6.1(Dimensions (length))	-	500	OK
Cl-6.2(Thickness)	-	500	OK
Cl-6.3(Squareness)	-	500	OK
Cl-7.1, 7.2, 7.3, 7.4, 7.5 & 7.6(Workmanship and finish)	-	500	OK
Cl-9.3(Moisture Content)	-	1000	OK
Cl-9.4.2(Glue Adhesion in Dry State- Adhesion of Plies)	-	740	OK
Cl-9.4.1(Glue Adhesion in Dry State- Glue Shear Strength -Average)	-	740	OK
Cl-9.5.1.1(Glue Adhesion in Water Resistance - Glue Shear Strength -Average)	-	980	-
Cl-9.5.1.2(Water Resistance Test-Adhesion of plies)	-	980	-
Cl-9.5.2(Water Resistance Test)	-	0	OK
Cl-9.6(Tensile Strength-Along the grain)	-	1000	OK
Cl-9.7(Mycological Test -Adhesion)	-	950	OK
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	950	OK
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	890	OK
Cl-9.9, Table-3 (i) a((Modulus of Elasticity: Across the Face Grain: Average) Wet Bending)	-	990	OK
Cl-9.9, Table-3 (i) b((Modulus of Elasticity: Across the Face Grain: Minimum Individual) Wet Bending)	-	990	OK
Cl-9.10(Retention of Preservative)	-	1500	OK
Cl-9.11(Formaldehyde Content Test)	-	3000	OK
Cl-9.12(Steady-State Formaldehyde Emission Test)	-	0	OK
Cl-9.4.2(Adhesion of Plies)	-	750	0
5.1.1(Defects in veneers)	-	100	0

17 Mar, 2028

-
Exclusion: Cl-9.5.2 (Water Resistance Test), Cl-9.12 (Steady-State Formaldehyde Emission Test)

9968

CIPET, Ahmedabad

7116134

IS 16709 (2017)

Textiles - Polypropylene (PP) woven, laminated, block bottom valve sacks for packaging of 50 kg cement - Specification

----

24150 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.2(Sack Width)	-	500	-
4.1.3(Top Closure Width and Bottom Closure Width)	-	500	-
4.1.4(Patch Length)	-	500	-
4.1.5(Patch Height)	-	500	-
4.1.6(Length of Valve)	-	500	-
4.1.7(Width of Valve Sleeve)	-	500	-
4.1.8(Length of Valve Sleeve)	-	500	-
5.1(Raw Material)	-	1050	-
5.2(Fabric)	-	500	-
5.2(Tape density and width)	-	1200	-
5.4(Lamination for PP)	-	1050	-
5.4(Lamination for LDPE)	-	1050	-
6.1(Mass of Bale)	-	500	-
6.2.1(Breaking Strength and Elongation at Break of Fabric)	-	2200	-
6.2.2(Weld Strength of Top and Bottom Closures)	-	1100	-
6.3(Drop Impact Testing of Filled Sacks)	-	1100	-
6.4(Ash Content)	-	1200	-
Cl-5.6(Capacity)	-	500	-
Cl- 6.6, Table.-1 (ii)(Ends per dm)	-	500	-
Cl-6.6, Table-1 (iii)(Picks per dm)	-	500	-
Cl.6.6, Table-1 (vii)(Elongation at break of fabric)	-	2200	-
4.1.1(Sack Length)	-	500	-
8(Atomspheric Conditions for Conditioning and Testing)	-	0	-

31 Dec, 2027

-
Included w.e.f. 22.08.2024 Exclusion: Cl.6.5 (Air Permeability)

9969

Central Institute of Petrochemicals Engineering & Technology (CIPET), Chandrapur

7173804

IS 16709 (2017)

Textiles - Polypropylene (PP) woven, laminated, block bottom valve sacks for packaging of 50 kg cement - Specification

50kg

20700.0 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(Sack Length)	-	500.0	GST Charges Extra
4.1.2(Sack Width)	-	500.0	GST Charges Extra
4.1.3(Top Closure Width and Bottom Closure Width)	-	500.0	GST Charges Extra
4.1.4(Patch Length)	-	500.0	GST Charges Extra
4.1.5(Patch Height)	-	500.0	GST Charges Extra
4.1.6(Length of Valve)	-	500.0	GST Charges Extra
4.1.7(Width of Valve Sleeve)	-	500.0	GST Charges Extra
4.1.8(Length of Valve Sleeve)	-	500.0	GST Charges Extra
5.1(Raw Material)	-	2000.0	GST Charges Extra
5.2(Fabric)	-	500.0	GST Charges Extra
5.2(Tape density and width)	-	700.0	GST Charges Extra
5.4(Lamination for PP)	-	2000.0	GST Charges Extra
5.4(Lamination for LDPE)	-	2000.0	GST Charges Extra
6.1(Mass of Bale)	-	500.0	GST Charges Extra
6.2.1(Breaking Strength and Elongation at Break of Fabric)	-	3200.0	Breaking Strength 1100x2(LW & WW)=2200+Sample preparation charges 1000.0 (GST Charges Extra)
6.2.2(Weld Strength of Top and Bottom Closures)	-	1600.0	Breaking Strength 1100+Sample preparation charges 500.0 (GST Charges Extra)
6.3(Drop Impact Testing of Filled Sacks)	-	1100.0	GST Charges Extra
6.4(Ash Content)	-	1200.0	GST Charges Extra
8(Atomspheric Conditions for Conditioning and Testing)	-	400.0	GST Charges Extra
Cl-5.6(Capacity)	-	500.0	GST Charges Extra
Cl- 6.6, Table.-1 (ii)(Ends per dm)	-	500.0	GST Charges Extra
Cl-6.6, Table-1 (iii)(Picks per dm)	-	500.0	GST Charges Extra
Cl.6.6, Table-1 (vii)(Elongation at break of fabric)	-	0.0	-

10 Sep, 2029

-
Included w.e.f. 23.08.2024 Exclusion: Cl.6.5 (Air Permeability)

9970

CIPET, Madurai

6139834

IS 9537 : Part 3 (1983)

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials

16-63mm

7975 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Marking)	-	250	25% Discount for BIS on Testing Charges Only
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	250	25% Discount for BIS on Testing Charges Only
6.3(Standard Mark on Conduit)	-	250	25% Discount for BIS on Testing Charges Only
7.1.1(Maximum and minimum outside diameter of socket)	-	1000	25% Discount for BIS on Testing Charges Only
7.1.1 Table-2(Length of Socket end)	-	1000	25% Discount for BIS on Testing Charges Only
7.1.2(Maximum and minimum outside diameter of conduit)	-	1000	25% Discount for BIS on Testing Charges Only
7.2(Minimum inside diameter of conduit)	-	1000	25% Discount for BIS on Testing Charges Only
7.3(Length of conduit)	-	1000	25% Discount for BIS on Testing Charges Only
7.4(Unifomity of The wall Thickness)	-	1000	25% Discount for BIS on Testing Charges Only
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	250	25% Discount for BIS on Testing Charges Only
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	1000	25% Discount for BIS on Testing Charges Only
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	1100	25% Discount for BIS on Testing Charges Only
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	1100	25% Discount for BIS on Testing Charges Only
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	1000	25% Discount for BIS on Testing Charges Only
10(Resistance to Heat -Ball presure test)	-	700	25% Discount for BIS on Testing Charges Only
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	700	25% Discount for BIS on Testing Charges Only
12(Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	1100	Speciemn Preparation Rs. 500/- 25% Discount for BIS on Testing Charges Only
12(Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	1100	Speciemn Preparation Rs. 500/- 25% Discount for BIS on Testing Charges Only
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	500	25% Discount for BIS on Testing Charges Only
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	500	25% Discount for BIS on Testing Charges Only
12(3 Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	1100	Speciemn Preparation Rs. 500/- 25% Discount for BIS on Testing Charges Only
12(3 Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	1100	Speciemn Preparation Rs. 500/- 25% Discount for BIS on Testing Charges Only
11.0(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	700	25% Discount for BIS on Testing Charges Only
10.0(Resistance to Heat -Ball presure test)	-	700	25% Discount for BIS on Testing Charges Only
9.5 Fig.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	1000	25% Discount for BIS on Testing Charges Only
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	1100	25% Discount for BIS on Testing Charges Only
9.3(Compression Test (after removal of force) as per caluse 9.3.3 of IS: 9537 (Part 1)-1980)	-	1100	25% Discount for BIS on Testing Charges Only
9.3(Compression Test at Full force applied (On load))	-	1100	25% Discount for BIS on Testing Charges Only
9.2(Bending Test At Low Temp (-5 ±2°C))	-	1000	25% Discount for BIS on Testing Charges Only
9.2(Bending Test At Room Temp)	-	1000	25% Discount for BIS on Testing Charges Only
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	250	25% Discount for BIS on Testing Charges Only
7.4(Unifomity of The wall Thickness)	-	1000	25% Discount for BIS on Testing Charges Only
7.3(Length of conduit)	-	1000	25% Discount for BIS on Testing Charges Only
7.2 Fig.3(Minimum inside diameter of conduit)	-	1000	25% Discount for BIS on Testing Charges Only
7.1.2 Fig.2(Minimum outside diameter of conduit)	-	1000	25% Discount for BIS on Testing Charges Only
7.1.2 Fig.1(Maximum outside diameter of conduit)	-	1000	25% Discount for BIS on Testing Charges Only
7.1.1 Table-2(Length of Socket end)	-	1000	25% Discount for BIS on Testing Charges Only
7.1.1 Fig.8(Maximum inside diameter of socket)	-	1000	25% Discount for BIS on Testing Charges Only
7.1.1 Fig.7(Maximum outside diameter of socket)	-	1000	25% Discount for BIS on Testing Charges Only
6.3(Standard Mark on Conduit)	-	250	25% Discount for BIS on Testing Charges Only
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	250	25% Discount for BIS on Testing Charges Only
6.1 - d(Marking)	-	250	25% Discount for BIS on Testing Charges Only
6.1 - c(Marking)	-	250	25% Discount for BIS on Testing Charges Only
6.1 - b(Marking)	-	250	25% Discount for BIS on Testing Charges Only
6.1 - a(Marking)	-	250	25% Discount for BIS on Testing Charges Only

22 May, 2027

-
Included w.e.f. 20.08.2024

9971

CIPET, Madurai

6139834

IS 8360 : Part 1 (1977)

fabricated high density polyethylene (HDPE) fittings for potable water supplies: Part 1 General requirements

HDPE

20506 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2(Material )	-	11725	Specimen Preparation Charges 1125 25% Discount for BIS on Testing Charges Only
3(Fitting sizes)	-	500	25% Discount for BIS on Testing Charges Only
4.1(DIMENSIONS OF FlTTINGS)	-	500	25% Discount for BIS on Testing Charges Only
4.2(DIMENSIONS OF FlTTINGS)	-	500	25% Discount for BIS on Testing Charges Only
5.1(hydraulic proof test)	-	4850	Hydraulic Proof Test 1 hrs/27Deg C (Rs 850) Hydraulic Proof Test for 100 hrs/27Deg C (Rs 850) 25% Discount for BIS on Testing Charges Only
7(Marking)	-	500	25% Discount for BIS on Testing Charges Only

22 May, 2027

-
Included w.e.f. 20.08.2024

9972

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 16709 (2017)

Textiles - Polypropylene (PP) woven, laminated, block bottom valve sacks for packaging of 50 kg cement - Specification

24150.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(Sack Length)	-	2000.00	ALL DIMENSIONS HAVE SINGLE CHARGE.
4.1.2(Sack Width)	-	0.00	ALL DIMENSIONS HAVE SINGLE CHARGE.
4.1.3(Top Closure Width and Bottom Closure Width)	-	0.00	ALL DIMENSIONS HAVE SINGLE CHARGE.
4.1.4(Patch Length)	-	0.00	ALL DIMENSIONS HAVE SINGLE CHARGE.
4.1.5(Patch Height)	-	0.00	ALL DIMENSIONS HAVE SINGLE CHARGE.
4.1.6(Length of Valve)	-	0.00	ALL DIMENSIONS HAVE SINGLE CHARGE.
4.1.7(Width of Valve Sleeve)	-	0.00	ALL DIMENSIONS HAVE SINGLE CHARGE.
4.1.8(Length of Valve Sleeve)	-	0.00	ALL DIMENSIONS HAVE SINGLE CHARGE.
5.1(Raw Material)	-	1050.00	-
5.2(Fabric)	-	7350.00	Fabric Construction- 500 Tape Width - 500 Material (tests asper IS 6192) Identification (Chemical Analysis) - 1050 Melt flow rate (MFR) - 1100 Linear Density - 700 Tanacity - 1100 Elongation of the Tape - Thickness of the Tape - 500
5.2(Tape density and width)	-	0.00	ALREADY TAKEN ABOVE
5.4(Lamination for PP)	-	2550.00	mass of lamination film - 500 Total mass of laminated woven fabric - 500 Material Identification of lamination - 1050 Overhung width - 500
5.4(Lamination for LDPE)	-	0.00	ALREADY TAKEN ABOVE
6.1(Mass of Bale)	-	0.00	-
6.2.1(Breaking Strength and Elongation at Break of Fabric)	-	2700.00	Avg. breaking strength of Fabric & elongation (min) a) Length wise 1100 500 b) Width wise 1100
6.2.2(Weld Strength of Top and Bottom Closures)	-	1100.00	-
6.3(Drop Impact Testing of Filled Sacks)	-	1100.00	-
6.4(Ash Content)	-	1200	-
8(Atomspheric Conditions for Conditioning and Testing)	-	0.00	-
Cl-5.6(Capacity)	-	500.00	-
Cl- 6.6, Table.-1 (ii)(Ends per dm)	-	500.00	-
Cl-6.6, Table-1 (iii)(Picks per dm)	-	500.00	-
Cl.6.6, Table-1 (vii)(Elongation at break of fabric)	-	0.00	ALREADY CHARGE TAKEN

24 Apr, 2027

-
Included w.e.f. 23.08.2024 Exclusion: Cl.6.5 (Air Permeability)

9973

Central Institute of Petrochemical Engineering and Technology (CIPET), Guwahati

5117534

IS 16709 (2017)

Textiles - Polypropylene (PP) woven, laminated, block bottom valve sacks for packaging of 50 kg cement - Specification

TEXTILES — POLYPROPYLENE (PP) WOVEN, LAMINATED, BLOCK B

25700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(Sack Length)	-	500	-
4.1.2(Sack Width)	-	500	-
4.1.3(Top Closure Width and Bottom Closure Width)	-	500	-
4.1.4(Patch Length)	-	500	-
4.1.5(Patch Height)	-	500	-
4.1.6(Length of Valve)	-	500	-
4.1.7(Width of Valve Sleeve)	-	500	-
4.1.8(Length of Valve Sleeve)	-	500	-
5.1(Raw Material)	-	2000	-
5.2(Fabric)	-	500	-
5.2(Tape density and width)	-	1200	Linear density : 700/- Width of tape:500/-
5.4(Lamination for PP)	-	2000	-
5.4(Lamination for LDPE)	-	500	-
6.1(Mass of Bale)	-	500	-
6.2.1(Breaking Strength and Elongation at Break of Fabric)	-	1100	-
6.2.2(Weld Strength of Top and Bottom Closures)	-	1100	-
6.3(Drop Impact Testing of Filled Sacks)	-	1100	-
Cl-5.6(Capacity)	-	500	-
Cl- 6.6, Table.-1 (ii)(Ends per dm)	-	500	-
Cl-6.6, Table-1 (iii)(Picks per dm)	-	500	-
Cl.6.6, Table-1 (vii)(Elongation at break of fabric)	-	1100	-
6.4(Ash Content)	-	1200	-
8(Atomspheric Conditions for Conditioning and Testing)	-	0	-

31 Dec, 2026

-
Included w.e.f. 23.08.2024 Exclusion: Cl.6.5 (Air Permeability)

9974

INDIAN TESTING LABORATORY PRIVATE LIMITED, GREATER NOIDA

8171306

IS 447 (1988)

Specification for rubber hose for welding (Fourth Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 3.2 - Table 1(Bore size)	-	500	-
Cl. 3.2 - Table 1(Lining Thickness)	-	500	-
Cl. 3.2 - Table 1(Cover Thickness)	-	500	-
Cl. 3.2 - Table 1(Length %)	-	500	-
Cl. 3.3 - Table 2(Tensile strength - Lining MPA)	-	1000	-
Cl. 3.3 - Table 2(Tensile strength - Cover Mpa)	-	1000	-
Cl. 3.3 - Table 2(Elongation at break - Lining %)	-	1000	-
Cl. 3.3 - Table 2(Elongation at break - Cover %)	-	1000	-
Cl. 3.3 - Table 2(After Ageing Tensile strength - Lining %)	-	1000	-
Cl. 3.3 - Table 2(After Ageing Tensile strength - Cover %)	-	1000	-
Cl. 3.3 - Table 2(After Ageing Elongation at break - Lining %)	-	1000	-
Cl. 3.3 - Table 2(After Ageing Elongation at break - Cover %)	-	1000	-
Cl. 3.4 - Table3(Pressure Tests)	-	4000	-
Cl. 3.4 - Table3(Adhesion KN/m Min)	-	1000	-
Cl. 3.2 - Table 1(Bore size, mm)	-	0	-
Cl. 3.2 - Table 1(Lining Thickness, mm)	-	0	-
Cl. 3.2 - Table 1(Cover Thickness, mm)	-	0	-
Cl. 3.2 - Table 1(Length)	-	0	-
Cl. 3.3 - Table 2(Tensile strength - Lining, Mpa)	-	0	-
Cl. 3.3 - Table 2(Tensile strength - Cover, Mpa)	-	0	-
Cl. 3.3 - Table 2(Elongation at break - Lining)	-	0	-
Cl. 3.3 - Table 2(Elongation at break - Cover)	-	0	-
Cl. 3.3 - Table 2(After Ageing Tensile strength - Lining)	-	0	-
Cl. 3.3 - Table 2(After Ageing Tensile strength - Cover)	-	0	-
Cl. 3.3 - Table 2(After Ageing Elongation at break - Lining)	-	0	-
Cl. 3.3 - Table 2(After Ageing Elongation at break - Cover)	-	0	-
Cl. 3.4 - Table3(Pressure Tests)	-	0	-
Cl. 3.4 - Table3(Adhesion, KN/m Min)	-	0	-
Cl. 3.4 - Table3(Adhesion)	-	0	-
Cl. 3.4 - Table3(Pressure Tests)	-	0	-
Cl. 3.3 - Table 2(After Ageing Elongation at break - Cover)	-	0	-
Cl. 3.3 - Table 2(After Ageing Elongation at break - Lining)	-	0	-
Cl. 3.3 - Table 2(After Ageing Tensile strength - Cover)	-	0	-
Cl. 3.3 - Table 2(After Ageing Tensile strength - Lining)	-	0	-
Cl. 3.3 - Table 2(Elongation at break - Cover)	-	0	-
Cl. 3.3 - Table 2(Elongation at break - Lining)	-	0	-
Cl. 3.3 - Table 2(Tensile strength - Cover)	-	0	-
Cl. 3.3 - Table 2(Tensile strength - Lining)	-	0	-
Cl. 3.2 - Table 1(Length)	-	0	-
Cl. 3.2 - Table 1(Cover Thickness)	-	0	-
Cl. 3.2 - Table 1(Lining Thickness)	-	0	-
Cl. 3.2 - Table 1(Bore size)	-	0	-

15 Aug, 2028

-
Included w.e.f 09.10.2024

9975

Atharva Laboratories Pvt. Ltd. (D115A), Noida (8134206)

8134206

IS 5405 (2019)

Sanitary napkins – Specification (second revision)

16250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5(SIZES, Regular )	-	250	-
Cl 5(SIZES, Large)	-	0	-
Cl 5(SIZES, Extra Large)	-	0	-
Cl 5(SIZES, XXL)	-	0	-
Cl 5(Absorbent Capacity, Regular )	-	0	-
Cl 5(Absorbent Capacity, Large)	-	0	-
Cl 5(Absorbent Capacity, Extra Large)	-	0	-
Cl 5(Absorbent Capacity, XXL)	-	0	-
Cl 7.1(pH Value, IS 1390 (cold method) for all sizes)	-	500	-
Cl 7.2(Ability to Withstand Pressure after Absorption, for all sizes, Annex B)	-	2500	-
Cl 7.3.1(Bacterial and Fungal Bioburden, 7.3.1.1, ISO 11737 (Part 1))	-	3500	-
Cl7.3.2(Test for Common Skin Pathogen — Staphylococcus Aureus, 7.3.2.1, IS 5887 (Part 2))	-	1000	-
Cl 7.4(Biocompatibility Evaluation — Cytotoxicity, Irritation and Skin Sensitization, IS/ISO 10993 Part 5 and IS/ISO 10993 Part 10)	-	0	-
Cl 7.5(Biodegradability and Compostability (Optional), IS/ISO 17088.)	-	0	-
Cl 5(SIZES, Regular )	-	0	-
Cl 5(SIZES, Large)	-	0	-
Cl 5(SIZES, Extra Large)	-	0	-
Cl 5(SIZES, XXL)	-	0	-
Cl 5(Absorbent Capacity, Regular )	-	0	-
Cl 5(Absorbent Capacity, Large)	-	0	-
Cl 5(Absorbent Capacity, Extra Large)	-	0	-
Cl 5(Absorbent Capacity, XXL)	-	0	-
Cl 7.1(pH Value, IS 1390 (cold method) for all sizes)	-	0	-
Cl 7.2(Ability to Withstand Pressure after Absorption, for all sizes, Annex B)	-	0	-
Cl 7.3.1(Bacterial and Fungal Bioburden, 7.3.1.1, ISO 11737 (Part 1))	-	0	-
Cl7.3.2(Test for Common Skin Pathogen — Staphylococcus Aureus, 7.3.2.1, IS 5887 (Part 2))	-	0	-
Cl 7.4(Biocompatibility Evaluation — Cytotoxicity, Irritation and Skin Sensitization, IS/ISO 10993 Part 5 and IS/ISO 10993 Part 10)	-	0	-
Cl 7.5(Biodegradability and Compostability (Optional), IS/ISO 17088.)	-	0	-
3.1(Cover/Top sheet)	-	500	-
3.2(Absorbent Core)	-	1000	-
3.3(Barrier or Bottom Sheet)	-	1000	-
4.1 (1)(Type and shapes of sanitary napkins)	-	250	-
4.2(Sanitary napkins shape & design)	-	250	-
6.0(Manufacture, workmanship & finish)	-	1000	-
CL 7.4(Biocompatibility Evaluation - Cytotoxicity, Irritation and Skin Sensitization (Optional))	-	0	-
CL 7.5(Compostability or Biodegradability during Composting (Optional))	-	0	-
7.6(Pthalate test)	-	4500	-
Cl 5(SIZES, Regular )	-	0	-
Cl 5(SIZES, Large)	-	0	-
Cl 5(SIZES, Extra Large)	-	0	-
Cl 5(SIZES, XXL)	-	0	-
Cl 5(Absorbent Capacity, Regular )	-	0	-
Cl 5(Absorbent Capacity, Large)	-	0	-
Cl 5(Absorbent Capacity, Extra Large)	-	0	-
Cl 5(Absorbent Capacity, XXL)	-	0	-
Cl 7.1(pH Value, IS 1390 (cold method) for all sizes)	-	0	-
Cl 7.2(Ability to Withstand Pressure after Absorption, for all sizes, Annex B)	-	0	-
Cl 7.3.1(Bacterial and Fungal Bioburden, 7.3.1.1, ISO 11737 (Part 1))	-	0	-
Cl7.3.2(Test for Common Skin Pathogen — Staphylococcus Aureus, 7.3.2.1, IS 5887 (Part 2))	-	0	-
Cl 7.4(Biocompatibility Evaluation — Cytotoxicity, Irritation and Skin Sensitization, IS/ISO 10993 Part 5 and IS/ISO 10993 Part 10)	-	0	-
Cl 7.5(Biodegradability and Compostability (Optional), IS/ISO 17088.)	-	0	-
Cl 5(SIZES, Regular )	-	0	-
Cl 5(SIZES, Large)	-	0	-
Cl 5(SIZES, Extra Large)	-	0	-
Cl 5(SIZES, XXL)	-	0	-
Cl 5(Absorbent Capacity, Regular )	-	0	-
Cl 5(Absorbent Capacity, Large)	-	0	-
Cl 5(Absorbent Capacity, Extra Large)	-	0	-
Cl 5(Absorbent Capacity, XXL)	-	0	-
Cl 7.1(pH Value, IS 1390 (cold method) for all sizes)	-	0	-
Cl 7.2(Ability to Withstand Pressure after Absorption, for all sizes, Annex B)	-	0	-
Cl 7.3.1(Bacterial and Fungal Bioburden, 7.3.1.1, ISO 11737 (Part 1))	-	0	-
Cl7.3.2(Test for Common Skin Pathogen — Staphylococcus Aureus, 7.3.2.1, IS 5887 (Part 2))	-	0	-
Cl 7.4(Biocompatibility Evaluation — Cytotoxicity, Irritation and Skin Sensitization, IS/ISO 10993 Part 5 and IS/ISO 10993 Part 10)	-	0	-
Cl 7.5(Biodegradability and Compostability (Optional), IS/ISO 17088.)	-	0	-
3.1(Cover/Top sheet)	-	0	-
3.2(Absorbent Core)	-	0	-
3.3(Barrier or Bottom Sheet)	-	0	-
4.1 (1)(Type and shapes of sanitary napkins)	-	0	-
4.2(Sanitary napkins shape & design)	-	0	-
6.0(Manufacture, workmanship & finish)	-	0	-
CL 7.4(Biocompatibility Evaluation - Cytotoxicity, Irritation and Skin Sensitization (Optional))	-	0	-
CL 7.5(Compostability or Biodegradability during Composting (Optional))	-	0	-
7.6(Pthalate test)	-	0	-
Cl 5(SIZES, Regular )	-	0	-
Cl 5(SIZES, Large)	-	0	-
Cl 5(SIZES, Extra Large)	-	0	-
Cl 5(SIZES, XXL)	-	0	-
Cl 5(Absorbent Capacity, Regular )	-	0	-
Cl 5(Absorbent Capacity, Large)	-	0	-
Cl 5(Absorbent Capacity, Extra Large)	-	0	-
Cl 5(Absorbent Capacity, XXL)	-	0	-
Cl 7.1(pH Value, IS 1390 (cold method) for all sizes)	-	0	-
Cl 7.2(Ability to Withstand Pressure after Absorption, for all sizes, Annex B)	-	0	-
Cl 7.3.1(Bacterial and Fungal Bioburden, 7.3.1.1, ISO 11737 (Part 1))	-	0	-
Cl7.3.2(Test for Common Skin Pathogen — Staphylococcus Aureus, 7.3.2.1, IS 5887 (Part 2))	-	0	-
Cl 7.4(Biocompatibility Evaluation — Cytotoxicity, Irritation and Skin Sensitization, IS/ISO 10993 Part 5 and IS/ISO 10993 Part 10)	-	0	-
Cl 7.5(Biodegradability and Compostability (Optional), IS/ISO 17088.)	-	0	-
Cl 5(SIZES, Regular )	-	0	-
Cl 5(SIZES, Large)	-	0	-
Cl 5(SIZES, Extra Large)	-	0	-
Cl 5(SIZES, XXL)	-	0	-
Cl 5(Absorbent Capacity, Regular )	-	0	-
Cl 5(Absorbent Capacity, Large)	-	0	-
Cl 5(Absorbent Capacity, Extra Large)	-	0	-
Cl 5(Absorbent Capacity, XXL)	-	0	-
Cl 7.1(pH Value, IS 1390 (cold method) for all sizes)	-	0	-
Cl 7.2(Ability to Withstand Pressure after Absorption, for all sizes, Annex B)	-	0	-
Cl 7.3.1(Bacterial and Fungal Bioburden, 7.3.1.1, ISO 11737 (Part 1))	-	0	-
Cl7.3.2(Test for Common Skin Pathogen — Staphylococcus Aureus, 7.3.2.1, IS 5887 (Part 2))	-	0	-
Cl 7.4(Biocompatibility Evaluation — Cytotoxicity, Irritation and Skin Sensitization, IS/ISO 10993 Part 5 and IS/ISO 10993 Part 10)	-	0	-
Cl 7.5(Biodegradability and Compostability (Optional), IS/ISO 17088.)	-	0	-
3.1(Cover/Top sheet)	-	0	-
3.2(Absorbent Core)	-	0	-
3.3(Barrier or Bottom Sheet)	-	0	-
4.1 (1)(Type and shapes of sanitary napkins)	-	0	-
4.2(Sanitary napkins shape & design)	-	0	-
6.0(Manufacture, workmanship & finish)	-	0	-
CL 7.4(Biocompatibility Evaluation - Cytotoxicity, Irritation and Skin Sensitization (Optional))	-	0	-
CL 7.5(Compostability or Biodegradability during Composting (Optional))	-	0	-
7.6(Pthalate test)	-	0	-
Cl 5(SIZES, Regular )	-	0	-
Cl 5(SIZES, Large)	-	0	-
Cl 5(SIZES, Extra Large)	-	0	-
Cl 5(SIZES, XXL)	-	0	-
Cl 5(Absorbent Capacity, Regular )	-	0	-
Cl 5(Absorbent Capacity, Large)	-	0	-
Cl 5(Absorbent Capacity, Extra Large)	-	0	-
Cl 5(Absorbent Capacity, XXL)	-	0	-
Cl 7.1(pH Value, IS 1390 (cold method) for all sizes)	-	0	-
Cl 7.2(Ability to Withstand Pressure after Absorption, for all sizes, Annex B)	-	0	-
Cl 7.3.1(Bacterial and Fungal Bioburden, 7.3.1.1, ISO 11737 (Part 1))	-	0	-
Cl7.3.2(Test for Common Skin Pathogen — Staphylococcus Aureus, 7.3.2.1, IS 5887 (Part 2))	-	0	-
Cl 7.4(Biocompatibility Evaluation — Cytotoxicity, Irritation and Skin Sensitization, IS/ISO 10993 Part 5 and IS/ISO 10993 Part 10)	-	0	-
Cl 7.5(Biodegradability and Compostability (Optional), IS/ISO 17088.)	-	0	-
Cl 5(SIZES, Regular )	-	0	-
Cl 5(SIZES, Large)	-	0	-
Cl 5(SIZES, Extra Large)	-	0	-
Cl 5(SIZES, XXL)	-	0	-
Cl 5(Absorbent Capacity, Regular )	-	0	-
Cl 5(Absorbent Capacity, Large)	-	0	-
Cl 5(Absorbent Capacity, Extra Large)	-	0	-
Cl 5(Absorbent Capacity, XXL)	-	0	-
Cl 7.1(pH Value, IS 1390 (cold method) for all sizes)	-	0	-
Cl 7.2(Ability to Withstand Pressure after Absorption, for all sizes, Annex B)	-	0	-
Cl 7.3.1(Bacterial and Fungal Bioburden, 7.3.1.1, ISO 11737 (Part 1))	-	0	-
Cl7.3.2(Test for Common Skin Pathogen — Staphylococcus Aureus, 7.3.2.1, IS 5887 (Part 2))	-	0	-
Cl 7.4(Biocompatibility Evaluation — Cytotoxicity, Irritation and Skin Sensitization, IS/ISO 10993 Part 5 and IS/ISO 10993 Part 10)	-	0	-
Cl 7.5(Biodegradability and Compostability (Optional), IS/ISO 17088.)	-	0	-
3.1(Cover/Top sheet)	-	0	-
3.2(Absorbent Core)	-	0	-
3.3(Barrier or Bottom Sheet)	-	0	-
4.1 (1)(Type and shapes of sanitary napkins)	-	0	-
4.2(Sanitary napkins shape & design)	-	0	-
6.0(Manufacture, workmanship & finish)	-	0	-
CL 7.4(Biocompatibility Evaluation - Cytotoxicity, Irritation and Skin Sensitization (Optional))	-	0	-
CL 7.5(Compostability or Biodegradability during Composting (Optional))	-	0	-
7.6(Pthalate test)	-	0	-

21 Jul, 2028

-
Included w.e.f 14.01.2025 Exclusion : CL 7.4 Biocompatibility Evaluation - Cytotoxicity, Irritation and Skin Sensitization, CL 7.5 Compostability or Biodegradability during Composting

9976

CIPET, Vijayawada

6141334

IS 17399 (2020)

Textiles - Polypropylene ( PP )/ High Density Polyethylene ( HDPE ) Laminated Woven Sacks for Mail Sorting, Storage, Transport and Distribution - Specification

PP / HDPE Laminated Woven Sacks TYPE - I, II, III

42280 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(MANUFACTURE - Raw Materials)	-	1050	Nil
5.2(MANUFACTURE - Fabric for PP tapes & for HDPE tapes)	-	7350	Nil
5.2- Table 1- i)("REQUIREMENTS - Inside dimensions a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm")	-	500	Nil
5.2- Table 1- ii)(REQUIREMENTS - Ends per dm)	-	500	Nil
5.2- Table 1- iii)(REQUIREMENTS - Picks per dm)	-	500	Nil
5.2- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g)	-	500	Nil
5.2- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf) a) Lengthwise b) Widthwise)	-	2700	Nil
5.2- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min, N2), (kgf))	-	1100	Nil
5.2- Table 1- vii)("REQUIREMENTS - Elongation at break of fabric, percent: a) Lengthwise b) Widthwise")	-	0	Nil
5.2- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks)	-	1200	Nil
5.3(Lamination)	-	2050	Nil
5.4(Sack Fabrication)	-	7750	Nil
5.5(Capacity)	-	500	Nil
6.1- Table 1- i)(REQUIREMENTS - Inside dimensions a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm)	-	1500	Nil
6.1- Table 1- ii)(REQUIREMENTS - Ends per dm)	-	0	Nil
6.1- Table 1- iii)(REQUIREMENTS - Picks per dm)	-	0	Nil
6.1- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g)	-	0	Nil
6.1- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf))	-	0	Nil
6.1- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min)	-	2200	Nil
6.1- Table 1- vii)(REQUIREMENTS - Elongation at break of fabric, percent a) Lengthwise b) Widthwise)	-	0	Nil
6.1- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks)	-	0	Nil
6.4(UV Resistance Test)	-	12880	Including Specimen Charges
7(PRINTING, PACKAGING AND MARKING)	-	0	Nil
8(ATMOSPHERIC CONDITIONS FOR SAMPLE CONDITIONING AND TESTING)	-	0	Nil
Clause 5.1(Raw Materials)	-	0	Nil
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	0	Nil
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	0	Nil
"Clause 5.2 Table 1(ii)"(Ends per dm)	-	0	Nil
"Clause 5.2 Table 1(iii)"(Picks per dm)	-	0	Nil
"Clause 5.2 Table 1(iv)"("Mass of laminated sack, g")	-	0	Nil
"Clause 5.2 Table 1(v)"("Breaking strength of laminated fabric")	-	0	Nil
"Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam)	-	0	Nil
"Clause 5.2 Table 1(vii)"("Elongation at break of fabric, percent:")	-	0	Nil
"Clause 5.2 Table 1(viii)"("Ash content, Max, percent")	-	0	Nil
Clause 5.3(Lamination with a thin film of polypropylene)	-	0	Nil
Clause 5.4(Sack Fabrication)	-	0	Nil
Clause 7.3(Marking on Sacks)	-	0	Nil
Clause 5.1(Raw Materials)	-	0	Nil
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	0	Nil
"Clause 5.2 Table 1(ii)"(Ends per dm)	-	0	Nil
"Clause 5.2 Table 1(iii)"(Picks per dm)	-	0	Nil
"Clause 5.2 Table 1(iv)"("Mass of laminated sack, g")	-	0	Nil
"Clause 5.2 Table 1(v)"("Breaking strength of laminated fabric")	-	0	Nil
"Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam)	-	0	Nil
"Clause 5.2 Table 1(vii)"("Elongation at break of fabric, percent:")	-	0	Nil
"Clause 5.2 Table 1(viii)"("Ash content, Max, percent")	-	0	Nil
Clause 5.3(Lamination with a thin film of polypropylene)	-	0	Nil
Clause 7.3(Marking on Sacks)	-	0	Nil
5.1(MANUFACTURE - Raw Materials)	-	0	Nil
5.2(MANUFACTURE - Fabric for PP tapes & for HDPE tapes)	-	0	Nil
5.2- Table 1- i)("REQUIREMENTS - Inside dimensions a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm")	-	0	Nil
5.2- Table 1- ii)(REQUIREMENTS - Ends per dm)	-	0	Nil
5.2- Table 1- iii)(REQUIREMENTS - Picks per dm)	-	0	Nil
5.2- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g)	-	0	Nil
5.2- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf) a) Lengthwise b) Widthwise)	-	0	Nil
5.2- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min, N2), (kgf))	-	0	Nil
5.2- Table 1- vii)("REQUIREMENTS - Elongation at break of fabric, percent: a) Lengthwise b) Widthwise")	-	0	Nil
5.2- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks)	-	0	Nil
5.3(Lamination)	-	0	Nil
5.4(Sack Fabrication)	-	0	Nil
5.5(Capacity)	-	0	Nil
6.1- Table 1- i)(REQUIREMENTS - Inside dimensions a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm)	-	0	Nil
6.1- Table 1- ii)(REQUIREMENTS - Ends per dm)	-	0	Nil
6.1- Table 1- iii)(REQUIREMENTS - Picks per dm)	-	0	Nil
6.1- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g)	-	0	Nil
6.1- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf))	-	0	Nil
6.1- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min)	-	0	Nil
6.1- Table 1- vii)(REQUIREMENTS - Elongation at break of fabric, percent a) Lengthwise b) Widthwise)	-	0	Nil
6.1- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks)	-	0	Nil
6.4(UV Resistance Test)	-	0	Nil
7(PRINTING, PACKAGING AND MARKING)	-	0	Nil
8(ATMOSPHERIC CONDITIONS FOR SAMPLE CONDITIONING AND TESTING)	-	0	Nil
Clause 5.1(Raw Materials)	-	0	Nil
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	0	Nil
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	0	Nil
"Clause 5.2 Table 1(ii)"(Ends per dm)	-	0	Nil
"Clause 5.2 Table 1(iii)"(Picks per dm)	-	0	Nil
"Clause 5.2 Table 1(iv)"("Mass of laminated sack, g")	-	0	Nil
"Clause 5.2 Table 1(v)"("Breaking strength of laminated fabric")	-	0	Nil
"Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam)	-	0	Nil
"Clause 5.2 Table 1(vii)"("Elongation at break of fabric, percent:")	-	0	Nil
"Clause 5.2 Table 1(viii)"("Ash content, Max, percent")	-	0	Nil
Clause 5.3(Lamination with a thin film of polypropylene)	-	0	Nil
Clause 5.4(Sack Fabrication)	-	0	Nil
Clause 7.3(Marking on Sacks)	-	0	Nil
Clause 5.1(Raw Materials)	-	0	Nil
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	0	Nil
"Clause 5.2 Table 1(ii)"(Ends per dm)	-	0	Nil
"Clause 5.2 Table 1(iii)"(Picks per dm)	-	0	Nil
"Clause 5.2 Table 1(iv)"("Mass of laminated sack, g")	-	0	Nil
"Clause 5.2 Table 1(v)"("Breaking strength of laminated fabric")	-	0	Nil
"Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam)	-	0	Nil
"Clause 5.2 Table 1(vii)"("Elongation at break of fabric, percent:")	-	0	Nil
"Clause 5.2 Table 1(viii)"("Ash content, Max, percent")	-	0	Nil
Clause 5.3(Lamination with a thin film of polypropylene)	-	0	Nil
Clause 7.3(Marking on Sacks)	-	0	Nil

06 Jun, 2027

-
Included w.e.f. 23.08.2024

9977

CIPET, Ahmedabad

7116134

IS 17399 (2020)

Textiles - Polypropylene ( PP )/ High Density Polyethylene ( HDPE ) Laminated Woven Sacks for Mail Sorting, Storage, Transport and Distribution - Specification

42280 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(MANUFACTURE - Raw Materials)	-	1050	-
5.2(MANUFACTURE - Fabric for PP tapes & for HDPE tapes)	-	500	-
5.2- Table 1- i)("REQUIREMENTS - Inside dimensions a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm")	-	500	-
5.2- Table 1- ii)(REQUIREMENTS - Ends per dm)	-	500	-
5.2- Table 1- iii)(REQUIREMENTS - Picks per dm)	-	500	-
5.2- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g)	-	500	-
5.2- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf) a) Lengthwise b) Widthwise)	-	1100	-
5.2- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min, N2), (kgf))	-	1100	-
5.2- Table 1- vii)("REQUIREMENTS - Elongation at break of fabric, percent: a) Lengthwise b) Widthwise")	-	0	-
5.2- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks)	-	1200	-
5.3(Lamination)	-	500	-
5.4(Sack Fabrication)	-	500	-
5.5(Capacity)	-	500	-
6.1- Table 1- i)(REQUIREMENTS - Inside dimensions a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm)	-	500	-
6.1- Table 1- ii)(REQUIREMENTS - Ends per dm)	-	500	-
6.1- Table 1- iii)(REQUIREMENTS - Picks per dm)	-	500	-
6.1- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g)	-	500	-
6.1- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf))	-	1100	-
6.1- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min)	-	1100	-
6.1- Table 1- vii)(REQUIREMENTS - Elongation at break of fabric, percent a) Lengthwise b) Widthwise)	-	1100	-
6.1- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks)	-	1200	-
6.4(UV Resistance Test)	-	10180	-
7(PRINTING, PACKAGING AND MARKING)	-	500	-
8(ATMOSPHERIC CONDITIONS FOR SAMPLE CONDITIONING AND TESTING)	-	0	-
Clause 5.1(Raw Materials)	-	1050	-
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	500	-
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	500	-
"Clause 5.2 Table 1(ii)"(Ends per dm)	-	500	-
"Clause 5.2 Table 1(iii)"(Picks per dm)	-	500	-
"Clause 5.2 Table 1(iv)"("Mass of laminated sack, g")	-	500	-
"Clause 5.2 Table 1(v)"("Breaking strength of laminated fabric")	-	1100	-
"Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam)	-	1100	-
"Clause 5.2 Table 1(vii)"("Elongation at break of fabric, percent:")	-	1100	-
"Clause 5.2 Table 1(viii)"("Ash content, Max, percent")	-	1200	-
Clause 5.3(Lamination with a thin film of polypropylene)	-	500	-
Clause 5.4(Sack Fabrication)	-	500	-
Clause 7.3(Marking on Sacks)	-	500	-
Clause 5.1(Raw Materials)	-	1050	-
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	500	-
"Clause 5.2 Table 1(ii)"(Ends per dm)	-	500	-
"Clause 5.2 Table 1(iii)"(Picks per dm)	-	500	-
"Clause 5.2 Table 1(iv)"("Mass of laminated sack, g")	-	500	-
"Clause 5.2 Table 1(v)"("Breaking strength of laminated fabric")	-	1100	-
"Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam)	-	1100	-
"Clause 5.2 Table 1(vii)"("Elongation at break of fabric, percent:")	-	1100	-
"Clause 5.2 Table 1(viii)"("Ash content, Max, percent")	-	1200	-
Clause 5.3(Lamination with a thin film of polypropylene)	-	500	-
Clause 7.3(Marking on Sacks)	-	500	-

31 Dec, 2027

-
Included w.e.f. 20.08.2024

9978

Central Institute of Petrochemicals Engineering & Technology (CIPET), Chandrapur

7173804

IS 11652 (2017)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg cement – Specification (third revision)

50kg

35730.0 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	250.00	Testing Charges are Excluding GST
4.1(Raw Material )	-	2000.00	Testing Charges are Excluding GST
4.2 (Linear Density, 900 denier)	-	700.00	Testing Charges are Excluding GST
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	500.00	Testing Charges are Excluding GST
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	500.00	Testing Charges are Excluding GST
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	700.00	Testing Charges are Excluding GST
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	0.00	-
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	500.00	Testing Charges are Excluding GST
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	500.00	Testing Charges are Excluding GST
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	500.00	Testing Charges are Excluding GST
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	0.00	-
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	0.00	-
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	0.00	-
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	0.00	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0.00	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0.00	-
4.3(Sacks)	-	500.00	Testing Charges are Excluding GST
4.4(Seam )	-	500.00	Testing Charges are Excluding GST
4.4(Seam )	-	0.00	-
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	500.00	Testing Charges are Excluding GST
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	0.00	-
4.4(Seam The stitching shall be done with double fold over seam to)	-	0.00	-
4.4(to a depth of minimum 25 mm, so that so that)	-	0.00	-
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	500.00	Testing Charges are Excluding GST
4.4(The number of stitches/dm shall be 14 ± 2.)	-	0.00	-
4.4(Seam)	-	0.00	-
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	2000.00	Testing Charges are Excluding GST
4.4(Seam)	-	0.00	-
4.4(Seam)	-	0.00	-
4.4(Seam)	-	0.00	-
4.5(Lamination )	-	500.0	Testing Charges are Excluding GST
4.5(Lamination )	-	2000.00	Testing Charges are Excluding GST
4.5(Lamination )	-	0.00	-
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	500.0	Testing Charges are Excluding GST
4.7(Valve for Filling of Sacks)	-	0.00	-
4.7(There shall be a double fold at the top seam and)	-	0.00	-
4.7(and then stitching shall be done through six layers.)	-	0.00	-
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	0.00	-
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0.00	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	500.0	Testing Charges are Excluding GST
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	0.00	-
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	0.00	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	3200.0	Breaking strength 1100.0 X2=2200 (Lengthwise&Widthwise) and Sample charges 1000.0 (Lengthwise&Widthwise) (Testing Charges are Excluding GST)
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	0.00	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	1600.0	Breaking strength 1100.0 and Sample charges 500.0 (Testing Charges are Excluding GST)
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	1600.0	Breaking strength 1100.0 and Sample charges 500.0 (Testing Charges are Excluding GST)
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	0.00	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	0.00	-
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	1100.00	Testing Charges are Excluding GST
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	1200.0	Testing Charges are Excluding GST
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	0.00	-
5/5.6 (UV Resistance, )	-	13380.0	UV Resistance 10180.0 + Breaking strength after UV 1100.0 X2=2200 (Lengthwise & Widthwise) and Sample charges 1000.0 (Lengthwise & Widthwise) (Testing Charges are Excluding GST)
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	0.00	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	0.00	-
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	0.00	-
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	0.00	-
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	0.00	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	0.00	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	0.00	-
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	0.00	-
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	0.00	-
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	0.00	-
4.1(Raw Material )	-	0.00	-
4.2 (Fabric)	-	0.00	-
4.2 (Linear Density, 900 denier)	-	0.00	-
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	0.00	-
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	0.00	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	0.00	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	0.00	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0.00	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0.00	-
4.3(Sacks)	-	0.00	-
4.4(Seam )	-	0.00	-
4.4(Seam )	-	0.00	-
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	0.00	-
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	0.00	-
4.4(Seam The stitching shall be done with double fold over seam to)	-	0.00	-
4.4(to a depth of minimum 25 mm, so that so that)	-	0.00	-
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	0.00	-
4.4(The number of stitches/dm shall be 14 ± 2.)	-	0.00	-
4.4(Seam)	-	0.00	-
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	0.00	-
4.4(Seam)	-	0.00	-
4.4(Seam)	-	0.00	-
4.4(Seam)	-	0.00	-
4.5(Lamination )	-	0.00	-
4.5(Lamination )	-	0.00	-
4.5(Lamination )	-	0.00	-
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	0.00	-
4.7(Valve for Filling of Sacks)	-	0.00	-
4.7(There shall be a double fold at the top seam and)	-	0.00	-
4.7(and then stitching shall be done through six layers.)	-	0.00	-
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	0.00	-
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0.00	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	0.00	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	0.00	-
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	0.00	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	0.00	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	0.00	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0.00	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0.00	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	0.00	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	0.00	-
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	0.00	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	0.00	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	0.00	-
5/5.6 (UV Resistance, )	-	0.00	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	0.00	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	0.00	-
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	0.00	-
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	0.00	-
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	0.00	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	0.00	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	0.00	-
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	0.00	-
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	0.00	-
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	0.00	-
4.1(Raw Material )	-	0.00	-
4.2 (Fabric)	-	0.00	-
4.2 (Linear Density, 900 denier)	-	0.00	-
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	0.00	-
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	0.00	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	0.00	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	0.00	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0.00	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0.00	-
4.3(Sacks)	-	0.00	-
4.4(Seam )	-	0.00	-
4.4(Seam )	-	0.00	-
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	0.00	-
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	0.00	-
4.4(Seam The stitching shall be done with double fold over seam to)	-	0.00	-
4.4(to a depth of minimum 25 mm, so that so that)	-	0.00	-
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	0.00	-
4.4(The number of stitches/dm shall be 14 ± 2.)	-	0.00	-
4.4(Seam)	-	0.00	-
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	0.00	-
4.4(Seam)	-	0.00	-
4.4(Seam)	-	0.00	-
4.4(Seam)	-	0.00	-
4.5(Lamination )	-	0.00	-
4.5(Lamination )	-	0.00	-
4.5(Lamination )	-	0.00	-
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	0.00	-
4.7(Valve for Filling of Sacks)	-	0.00	-
4.7(There shall be a double fold at the top seam and)	-	0.00	-
4.7(and then stitching shall be done through six layers.)	-	0.00	-
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	0.00	-
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0.00	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	0.00	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	0.00	-
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	0.00	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	0.00	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	0.00	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0.00	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0.00	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	0.00	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	0.00	-
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	0.00	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	0.00	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	0.00	-
5/5.6 (UV Resistance, )	-	0.00	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	0.00	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	0.00	-
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	0.00	-
Cl-5 Fig. 1- Table 1- Sr. no. ii(Ends per dm - Annex B 40 ± 2)	-	0.00	-
Cl-5 Fig. 1- Table 1-Sr. no. iii(Picks per dm-Annex B 40 ± 2)	-	0.00	-
Cl-5, Fig. 1- Table 1- Sr. no. i(Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm)	-	0.00	-
Cl-5, Fig. 1- Table 1- Sr. no. i(Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm)	-	0.00	-
Cl-5, Fig. 1- Table 1-Sr. no. i(Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm)	-	0	-
Cl-5, Fig. 1, Table 1(i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm)	-	0.00	-
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	0.00	-
4.1(Raw Material )	-	0.00	-
4.2 (Fabric)	-	0.00	-
4.2 (Linear Density, 900 denier)	-	0.00	-
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	0.00	-
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	0.00	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	0.00	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	0.00	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0.00	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0.00	-
4.3(Sacks)	-	0.00	-
4.4(Seam )	-	0.00	-
4.4(Seam )	-	0.00	-
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	0.00	-
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	0.00	-
4.4(Seam The stitching shall be done with double fold over seam to)	-	0.00	-
4.4(to a depth of minimum 25 mm, so that so that)	-	0.02	-
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	0.02	-
4.4(The number of stitches/dm shall be 14 ± 2.)	-	0.02	-
4.4(Seam)	-	0.02	-
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	0.02	-
4.4(Seam)	-	0.02	-
4.4(Seam)	-	0.02	-
4.4(Seam)	-	0.00	-
4.5(Lamination )	-	0.02	-
4.5(Lamination )	-	0.02	-
4.5(Lamination )	-	0.02	-
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	0.00	-
4.7(Valve for Filling of Sacks)	-	0.00	-
4.7(There shall be a double fold at the top seam and)	-	0.00	-
4.7(and then stitching shall be done through six layers.)	-	0.00	-
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	0.00	-
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0.00	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	0.00	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	0.00	-
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	0.00	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	0.00	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	0.00	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0.00	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0.00	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	0.00	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	0.00	-
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	0.00	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	0.00	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	0.00	-
5/5.6 (UV Resistance, )	-	0.00	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	0.00	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	0.00	-
4.2 (Fabric)	-	0.00	-

10 Sep, 2029

-
Included w.e.f. 20.08.2024

9979

Ahmedabad Textile Industry's Research Association (ATIRA), Ahmedabad

7173002

IS 18482 (2023)

Textiles - Sandwich extrusion laminated polypropylene PP woven sacks for packaging bulk commodities - Specification

35780 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Sack Type)	-	200	Sack Type Classification
5.2.1(Fabric)	-	200	Tape Width
5.2.2(Linear density of tapes)	-	450	-
5.2.4(Unlaminated fabric mass)	-	450	-
5.3.1.1.1(Mass of BOPP film in sandwich extrusion lamination)	-	450	-
5.3.1.1.2(Polypropylene coating mass for sandwich extrusion lamination of BOPP film with base PP woven fabric)	-	700	-
5.3.1.1.3(Total mass of BOPP film laminated woven fabric)	-	450	-
5.3.1.2.1(Mass of nonwoven fabric in sandwich extrusion lamination)	-	450	-
5.3.1.2.2(Polypropylene coating mass for sandwich extrusion lamination of non woven fabric with base PP woven fabric)	-	700	-
5.3.1.2.3(The total mass of nonwoven laminated woven fabric)	-	450	-
5.4.1.2(Bottom seam)	-	1200	-
5.4.2(Sack)	-	200	-
5.4.3(Sack)	-	1700	-
5.4.5(Liner)	-	850	-
6.1.1, Table 1(Inside length)	-	200	-
6.1.1, Table 1(Inside width)	-	200	-
6.1.1, Table 1(Gusset width)	-	200	-
6.1.1, Table 1(Warp per dm)	-	150	-
6.1.1, Table 1(Weft per dm)	-	150	-
6.1.1, Table 1(Mass of laminated fabric)	-	450	-
6.2, Table 1(Average breaking strength - Lengthwise)	-	450	-
6.2, Table 1(Average breaking strength - Widthwise)	-	450	-
6.2, Table 1(Breaking strength of bottom seam)	-	800	-
6.2, Table 1(Breaking strength of centre seam)	-	800	-
6.2, Table 1(Average elongation at break of fabric - Lengthwise)	-	0	-
6.2, Table 1(Average elongation at break of fabric - Widthwise)	-	0	-
6.3(Average breaking strength - Lengthwise after UV exposure)	-	9090	-
6.3(Average breaking strength - Widthwise after UV exposure)	-	9090	-
6.4(Drop Impact Testing of Filled Sacks)	-	3000	-
Clause 5.4.5.3("Free from pin holes (except for air removal perforations), patches, tears, blisters, and any other visible defects")	-	200	-
Clause 6.2.2(Stitch strength)	-	650	-
Clause 6.2.2(Weld seam strength)	-	800	-
Clause 5.4.5.3("Free from pin holes (except for air removal perforations), patches, tears, blisters, and any other visible defects")	-	0	-
Clause 6.2.2(Stitch strength)	-	0	-
Clause 6.2.2(Weld seam strength)	-	0	-
Clause 6.5 Table 1 viii(Ash content)	-	650	-

-
Included w.e.f 10.10.2024

9980

Stellar Test House, Noida

8171606

IS 9103 (1999)

Specification for Concrete Admixtures -

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 9, Table- 2(Dry material content )	-	500	-
Clause 9, Table- 2(Ash content)	-	500	-
Clause 9, Table- 2(Relative density)	-	300	-
Clause 9, Table- 2(Chloride ion content)	-	800	-
Clause 9, Table- 2( pH)	-	500	-
Clause 9, Table- 2(Dry material content )	-	500	-
Clause 9, Table- 2(Ash content)	-	500	-
Clause 9, Table- 2(Relative density)	-	300	-
Clause 9, Table- 2(Chloride ion content)	-	800	-
Clause 9, Table- 2( pH)	-	500	-
Cl 4, Table 1A(Slump)	-	1000	-
Cl 4, Table 1 B(Flow, Loss of workability on satnding, Minimum compressive strength ( 7 Days,28 Days, 6 Month and 1 Year))	-	1000	-
Cl 4, Table 1A(Water Content, percent of control sample, Max)	-	500	-
Cl 4, Table 1A(Time of setting, allowable deviation from control sample hours)	-	1000	-
Cl 4, Table 1A(Compressive strength, percent of control sample, Min)	-	2000	-
Cl 4, Table 1A(Flexural strength, percent of control sample, Min)	-	2000	-
Cl 4, Table 1A(Length change, percent increase over control sample, Max)	-	1500	-
Cl 4, Table 1A(Bleeding, percent increase over control sample, Max)	-	1000	-
Cl 4, Table 1A(Loss of workability)	-	1500	-
Cl 4, Table 1A(Air content (%), Max, over control)	-	1000	-
Cl 4, Table 1 B(Minimum compressive strength ( 7 Days,28 Days, 6 Month and 1 Year))	-	1500	-
Clause 4, Table 1B, SI no. (iii) (1 year minimum compressive strength, percent of control mix concrete)	-	1500	-
Clause 4, Table 1B, SI no. (iii) (6 months minimum compressive strength, percent of control mix concrete)	-	1500	-
Clause 4, Table 1B, SI no. (iii) (7 days minimum compressive strength, percent of control mix concrete)	-	1500	-
Clause 4, Table 1A, SI no. (v) (28 days flexural strength, percent of control sample)	-	1500	-
Clause 4, Table 1A, SI no. (v) (7 days flexural strength, percent of control sample)	-	1500	-
Clause 4, Table 1A, SI no. (v) (3 days flexural strength, percent of control sample)	-	1500	-
Clause 4, Table 1A, SI no. (iv) (1 year compressive strength, percent of control sample)	-	1500	-
Clause 4, Table 1A, SI no. (iv) (6 months compressive strength, percent of control sample)	-	2000	-
Clause 4, Table 1A, SI no. (iv) (28 days compressive strength, percent of control sample)	-	1500	-
Clause 4, Table 1A, SI no. (iv) (7 days compressive strength, percent of control sample)	-	1500	-
Clause 4, Table 1A, SI no. (iv) (3 days compressive strength, percent of control sample)	-	1500	-
Clause 4, Table 1A, SI no. (iv) (1 day compressive strength, percent of control sample)	-	1000	-
Clause 4, Table 1A, SI no. (iii) (Final time of setting allowable deviation from control sample)	-	1000	-
Clause 4, Table 1A, SI no. (iii) (Initial time of setting allowable deviation from control sample)	-	1000	-
4, Table 1B( minimum Compressive strength percent of control mix concrete 1 Year )	-	1500	-
4, Table 1B( minimum Compressive strength percent of control mix concrete 6 Months days)	-	1500	-
4, Table 1B( minimum Compressive strength percent of control mix concrete 28 days)	-	1500	-
4, Table 1B( minimum Compressive strength percent of control mix concrete 7 days)	-	1500	-
4, Table 1A(Compressive strength percent of control Sample 1 year )	-	1500	-
4, Table 1A(Compressive strength percent of control Sample 6 Months )	-	1500	-
4, Table 1A(Compressive strength percent of control Sample 28 Days )	-	1500	-
4, Table 1A(Compressive strength percent of control Sample 7 Days)	-	1500	-
4, Table 1A(Compressive strength percent of control Sample 3 Days)	-	1500	-
4, Table 1A(Compressive strength percent of control Sample 1 Day )	-	1500	-
4, Table 1A(Length Change percent Increase over control Sample 1 year)	-	1000	-
4, Table 1A(Length Change percent Increase over control Sample 6 Month)	-	1000	-
4, Table 1A(Length Change percent Increase over control Sample 28 Day)	-	1000	-
4, Table 1A(Flexural strength percent of control Sample 28 Day)	-	1500	-
4, Table 1A(Flexural strength percent of control Sample 7 Day)	-	1500	-
4, Table 1A(Flexural strength percent of control Sample 3 Day)	-	1500	-
Cl 9 Table 2(Dry material content ( a-For liquid admixture, b- For solid admixture), Ash content, Relative density, Chloride ion content, pH)	-	500	-
Cl 9 Table 2(Dry material content ( a-For liquid admixture, b- For solid admixture), Ash content, Relative density, Chloride ion content, pH)	-	500	-
Cl 4, Table 1 B(Flow)	-	1000	-
Cl 4, Table 1 B(Loss of workability on standing)	-	1000	-
Clause 4, Table 1B, SI no. (iii) (28 days minimum compressive strength, percent of control mix concrete)	-	1500	-
Clause 9, Table- 2(Dry material content )	-	0	-
Clause 9, Table- 2(Ash content)	-	0	-
Clause 9, Table- 2(Relative density)	-	0	-
Clause 9, Table- 2(Chloride ion content)	-	0	-
Clause 9, Table- 2( pH)	-	0	-
Clause 9, Table- 2(Dry material content )	-	0	-
Clause 9, Table- 2(Ash content)	-	0	-
Clause 9, Table- 2(Relative density)	-	0	-
Clause 9, Table- 2(Chloride ion content)	-	0	-
Clause 9, Table- 2( pH)	-	0	-
Cl 4, Table 1A(Slump)	-	0	-
Cl 4, Table 1 B(Flow, Loss of workability on satnding, Minimum compressive strength ( 7 Days,28 Days, 6 Month and 1 Year))	-	0	-
Cl 4, Table 1A(Water Content, percent of control sample, Max)	-	0	-
Cl 4, Table 1A(Time of setting, allowable deviation from control sample hours)	-	0	-
Cl 4, Table 1A(Compressive strength, percent of control sample, Min)	-	0	-
Cl 4, Table 1A(Flexural strength, percent of control sample, Min)	-	0	-
Cl 4, Table 1A(Length change, percent increase over control sample, Max)	-	0	-
Cl 4, Table 1A(Bleeding, percent increase over control sample, Max)	-	0	-
Cl 4, Table 1A(Loss of workability)	-	0	-
Cl 4, Table 1A(Air content (%), Max, over control)	-	0	-
Cl 4, Table 1 B(Minimum compressive strength ( 7 Days,28 Days, 6 Month and 1 Year))	-	0	-
Clause 4, Table 1B, SI no. (iii) (1 year minimum compressive strength, percent of control mix concrete)	-	0	-
Clause 4, Table 1B, SI no. (iii) (6 months minimum compressive strength, percent of control mix concrete)	-	0	-
Clause 4, Table 1B, SI no. (iii) (7 days minimum compressive strength, percent of control mix concrete)	-	0	-
Clause 4, Table 1A, SI no. (v) (28 days flexural strength, percent of control sample)	-	0	-
Clause 4, Table 1A, SI no. (v) (7 days flexural strength, percent of control sample)	-	0	-
Clause 4, Table 1A, SI no. (v) (3 days flexural strength, percent of control sample)	-	0	-
Clause 4, Table 1A, SI no. (iv) (1 year compressive strength, percent of control sample)	-	0	-
Clause 4, Table 1A, SI no. (iv) (6 months compressive strength, percent of control sample)	-	0	-
Clause 4, Table 1A, SI no. (iv) (28 days compressive strength, percent of control sample)	-	0	-
Clause 4, Table 1A, SI no. (iv) (7 days compressive strength, percent of control sample)	-	0	-
Clause 4, Table 1A, SI no. (iv) (3 days compressive strength, percent of control sample)	-	0	-
Clause 4, Table 1A, SI no. (iv) (1 day compressive strength, percent of control sample)	-	0	-
Clause 4, Table 1A, SI no. (iii) (Final time of setting allowable deviation from control sample)	-	0	-
Clause 4, Table 1A, SI no. (iii) (Initial time of setting allowable deviation from control sample)	-	0	-
4, Table 1B( minimum Compressive strength percent of control mix concrete 1 Year )	-	0	-
4, Table 1B( minimum Compressive strength percent of control mix concrete 6 Months days)	-	0	-
4, Table 1B( minimum Compressive strength percent of control mix concrete 28 days)	-	0	-
4, Table 1B( minimum Compressive strength percent of control mix concrete 7 days)	-	0	-
4, Table 1A(Compressive strength percent of control Sample 1 year )	-	0	-
4, Table 1A(Compressive strength percent of control Sample 6 Months )	-	0	-
4, Table 1A(Compressive strength percent of control Sample 28 Days )	-	0	-
4, Table 1A(Compressive strength percent of control Sample 7 Days)	-	0	-
4, Table 1A(Compressive strength percent of control Sample 3 Days)	-	0	-
4, Table 1A(Compressive strength percent of control Sample 1 Day )	-	0	-
4, Table 1A(Length Change percent Increase over control Sample 1 year)	-	0	-
4, Table 1A(Length Change percent Increase over control Sample 6 Month)	-	0	-
4, Table 1A(Length Change percent Increase over control Sample 28 Day)	-	0	-
4, Table 1A(Flexural strength percent of control Sample 28 Day)	-	0	-
4, Table 1A(Flexural strength percent of control Sample 7 Day)	-	0	-
4, Table 1A(Flexural strength percent of control Sample 3 Day)	-	0	-
Cl 9 Table 2(Dry material content ( a-For liquid admixture, b- For solid admixture), Ash content, Relative density, Chloride ion content, pH)	-	0	-
Cl 9 Table 2(Dry material content ( a-For liquid admixture, b- For solid admixture), Ash content, Relative density, Chloride ion content, pH)	-	0	-
Cl 4, Table 1 B(Flow)	-	0	-
Cl 4, Table 1 B(Loss of workability on standing)	-	0	-
Clause 4, Table 1B, SI no. (iii) (28 days minimum compressive strength, percent of control mix concrete)	-	0	-

26 Sep, 2028

-
Included w.e.f 06.12.2024

9981

AANKAN CALIBRATION AND TESTING CENTRE LLP, DANTLI

7184406

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

GRADE:MR/BWR/BWP,TYPE AA/AB/BB,t:max 25 mm,Class:E1/E2

8100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Classification by appearance)	-	100	ok
Cl-5.2, Table- 1 (i)(Blister)	-	100	ok
Cl-5.2, Table- 1 (ii)(Checks)	-	100	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	100	-
Cl-5.2, Table- 1 (iv)(Dote)	-	100	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	100	-
Cl-5.2, Table- 1 (vi)(Joints)	-	100	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	100	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	100	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	100	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	100	-
Cl-5.2, Table- 1 (xi)(Patches)	-	100	-
Cl-5.2, Table- 1 (xii)(Splits)	-	100	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	100	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	100	-
Cl-6.1(Timber)	-	0	-
Cl-6.2(Adhesive)	-	4000	ok
Cl-7.2.1(Thickness of veneers)	-	300	ok
Cl-7.2.3(Grain Direction)	-	0	ok
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	0	ok
Cl-7.2.5.2(Splits)	-	0	ok
Cl-7.2.5.3(Overlap)	-	0	ok
Cl-8.1(Dimensions -length)	-	300	ok
Cl-8.2(Thickness of the plywood boards)	-	300	0k
Cl-8.3(Squareness)	-	300	0k
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	1000	ok
Cl-11.3.2(Mycological Test)	-	1500	ok
Cl-11.4(Moisture Content)	-	750	ok
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1000	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1000	-
Cl-11.6(Formaldehyde Content Test)	-	3000	OK
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	0	OK

17 Mar, 2028

-
Exclusion: Cl-11.7 (Steady-State Formaldehyde Emission Test)

9982

CIPET, Madurai

6139834

IS 8360 : Part 3 (1977)

fabricated high density polyethylene (HDPE) fittings for potable water supplies, Part 3 Specifc requirements for 90 degree bends

16 -355 mm

20506 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2(MATERIAL)	-	11725	Raw material testing as per IS 4984-2016 Rs. 11725; Specimen Charges - Rs 1125/- 25% Discunt on Testing Charges Only for BIS
3(SIZES OF FITTINGS)	-	500	25% Discunt on Testing Charges Only for BIS
4(-DIMENSIONS OF FlTTINGS)	-	500	25% Discunt on Testing Charges Only for BIS
5.1(Hydraulic Proof Test -)	-	9650	(a) for 1hrs/27˚ C (For >630 mm fittings only) (b) for 100hrs/27˚ C (For <630 mm fittings only) (c) Type test for 165 hrs/80˚ C 25% Discunt on Testing Charges Only for BIS
6(SAMPLING)	-	0	25% Discunt on Testing Charges Only for BIS
2.2.3(The outside diameters and wall thicknesses of pipes)	-	500	25% Discunt on Testing Charges Only for BIS
2.2.2(Laying Length)	-	500	25% Discunt on Testing Charges Only for BIS
2.2.3(The outside diameters and wall thicknesses of pipes)	-	500	25% Discunt on Testing Charges Only for BIS
2.2.2(Laying Length)	-	500	25% Discunt on Testing Charges Only for BIS

22 May, 2027

-
Included w.e.f. 20.08.2024

9983

Classic Testing & Research Centre (B17), Noida

8180826

IS 374 (2019)

Specification for electric ceiling type fans and regulators (Third Revision)

25000 View breakup
20% concession in testing charges to BIS

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	1000	20% discount to BIS
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	1000	20% discount to BIS
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	1000	20% discount to BIS
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	250	20% discount to BIS
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	250	20% discount to BIS
8.1,a(Marking )	-	250	20% discount to BIS
8.1,b(Marking )	-	250	20% discount to BIS
8.1,c(Marking )	-	250	20% discount to BIS
8.1,d(Marking )	-	250	20% discount to BIS
8.1,e(Marking )	-	250	20% discount to BIS
8.1,f(Marking )	-	250	20% discount to BIS
8.1,g(Marking )	-	250	20% discount to BIS
8.2(Marking )	-	250	20% discount to BIS
8.3,a(Marking )	-	250	20% discount to BIS
8.3,b(Marking )	-	250	20% discount to BIS
8.3,c(Marking )	-	250	20% discount to BIS
8.3,d(Marking )	-	250	20% discount to BIS
8.3,e(Marking )	-	250	20% discount to BIS
8.4(Marking )	-	250	20% discount to BIS
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	250	20% discount to BIS
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	250	20% discount to BIS
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	250	20% discount to BIS
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	250	20% discount to BIS
6.2(Rating)	-	250	20% discount to BIS
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	250	20% discount to BIS
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	250	20% discount to BIS
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	250	20% discount to BIS
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	250	20% discount to BIS
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	250	20% discount to BIS
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	250	20% discount to BIS
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	250	20% discount to BIS
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	250	20% discount to BIS
10.1(Speed Regulators)	-	250	20% discount to BIS
10.2(Speed Regulators)	-	250	20% discount to BIS
10.2(Speed Regulators)	-	250	20% discount to BIS
10.2(Speed Regulators)	-	250	20% discount to BIS
10.3(Speed Regulators)	-	250	20% discount to BIS
10.4(Speed Regulators)	-	250	20% discount to BIS
10.5(Speed Regulators)	-	250	20% discount to BIS
10.6(Speed Regulators)	-	250	20% discount to BIS
10.7(Speed Regulators)	-	250	20% discount to BIS
10.7(Speed Regulators)	-	250	20% discount to BIS
10.8(Speed Regulators)	-	250	20% discount to BIS
11.1(Starting)	-	250	20% discount to BIS
11.2(Starting)	-	250	20% discount to BIS
12(Interchangeability)	-	250	20% discount to BIS
13(Silent Operation)	-	250	20% discount to BIS
14.3 & Table 1(Test for Air Performance)	-	250	20% discount to BIS
14.3 & Table 1(Test for Air Performance)	-	250	20% discount to BIS
14.4(Measurement of Speed of the Fan )	-	250	20% discount to BIS
14.4(Measurement of Speed of the Fan )	-	250	20% discount to BIS
14.5(Measurement of Power factor and Power Input)	-	250	20% discount to BIS
14.5(Measurement of Power factor and Power Input)	-	250	20% discount to BIS
16(Endurance Test)	-	250	20% discount to BIS
16(Endurance Test)	-	250	20% discount to BIS
16(Endurance Test)	-	250	20% discount to BIS
16(Endurance Test)	-	250	20% discount to BIS
16(Endurance Test)	-	250	20% discount to BIS
16(Endurance Test)	-	250	20% discount to BIS
17(Test for Harmonic Distortion)	-	250	20% discount to BIS
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	250	20% discount to BIS
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	250	20% discount to BIS
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	250	20% discount to BIS
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	250	20% discount to BIS
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	250	20% discount to BIS
8.1,a(Marking )	-	250	20% discount to BIS
8.1,b(Marking )	-	250	20% discount to BIS
8.1,c(Marking )	-	250	20% discount to BIS
8.1,d(Marking )	-	250	20% discount to BIS
8.1,e(Marking )	-	250	20% discount to BIS
8.1,f(Marking )	-	250	20% discount to BIS
8.1,g(Marking )	-	250	20% discount to BIS
8.2(Marking )	-	250	20% discount to BIS
8.3(Marking )	-	250	20% discount to BIS
8.3,a(Marking )	-	250	20% discount to BIS
8.3,b(Marking )	-	250	20% discount to BIS
8.3,c(Marking )	-	250	20% discount to BIS
8.3,d(Marking )	-	250	20% discount to BIS
8.3,e(Marking )	-	250	20% discount to BIS
8.4(Marking )	-	250	20% discount to BIS
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	250	20% discount to BIS
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	250	20% discount to BIS
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	250	20% discount to BIS
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	250	20% discount to BIS
6.2(Rating)	-	250	20% discount to BIS
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	250	20% discount to BIS
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	250	20% discount to BIS
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	250	20% discount to BIS
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	250	20% discount to BIS
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	250	20% discount to BIS
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	250	20% discount to BIS
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	250	20% discount to BIS
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	250	20% discount to BIS
10.1(Speed Regulators)	-	250	20% discount to BIS
10.2(Speed Regulators)	-	250	20% discount to BIS
10.2(Speed Regulators)	-	250	20% discount to BIS
10.2(Speed Regulators)	-	250	20% discount to BIS
10.3(Speed Regulators)	-	250	20% discount to BIS
10.4(Speed Regulators)	-	250	20% discount to BIS
10.5(Speed Regulators)	-	250	20% discount to BIS
10.6(Speed Regulators)	-	250	20% discount to BIS
10.7(Speed Regulators)	-	250	20% discount to BIS
10.7(Speed Regulators)	-	250	20% discount to BIS
10.8(Speed Regulators)	-	250	20% discount to BIS
11.1(Starting)	-	250	20% discount to BIS
11.2(Starting)	-	250	20% discount to BIS
12(Interchangeability)	-	250	20% discount to BIS
13(Silent Operation)	-	250	20% discount to BIS
14.3 & Table 1(Test for Air Performance)	-	250	20% discount to BIS
14.3 & Table 1(Test for Air Performance)	-	250	20% discount to BIS
14.4(Measurement of Speed of the Fan )	-	250	20% discount to BIS
14.4(Measurement of Speed of the Fan )	-	250	20% discount to BIS
14.5(Measurement of Power factor and Power Input)	-	250	20% discount to BIS
14.5(Measurement of Power factor and Power Input)	-	250	20% discount to BIS
16(Endurance Test)	-	250	20% discount to BIS
16(Endurance Test)	-	250	20% discount to BIS
16(Endurance Test)	-	250	20% discount to BIS
16(Endurance Test)	-	250	20% discount to BIS
16(Endurance Test)	-	250	20% discount to BIS
16(Endurance Test)	-	250	20% discount to BIS
17(Test for Harmonic Distortion)	-	250	20% discount to BIS
4(GENERAL REQUIREMENTS)	-	250	20% discount to BIS
5(GENERAL NOTES ON TESTS)	-	250	20% discount to BIS
15.1, 15.2(Air delivery and service value)	-	250	20% discount to BIS
Cl-9 (Cl-19.11.4.1 of IS 302-1)(Electrostatic discharge)	-	250	20% discount to BIS
Cl-9 (Cl-19.11.4.2 of IS 302-1)(Radiated Fields)	-	250	20% discount to BIS
Cl-9 (Cl-19.11.4.3 of IS 302-1)(Fast transient bursts)	-	250	20% discount to BIS
Cl-9 (Cl-19.11.4.4 of IS 302-1)(Surge Immunity test)	-	250	20% discount to BIS
Cl-9 (Cl-19.11.4.5 of IS 302-1)(Immunity to conducted discharge)	-	250	20% discount to BIS
Cl-9 (Cl-19.11.4.6 of IS 302-1)(Voltage dips and interruptions)	-	250	20% discount to BIS
Cl-9 (Cl-19.11.4.7 of IS 302-1)(Harmonics)	-	250	20% discount to BIS
Cl-9 (Cl-19.101 of IS 302-1)(Abnormal Operation)	-	250	20% discount to BIS

15 Oct, 2027

-
Exclusion: 19.11.4.2(Radiated field),19.11.4.5(Immunity to conducted discharges)

9984

WELL TECH TEST AND RESEARCH CENTER, DERABASSI

9177306

IS 10748 (2004)

Hot - Rolled steel strip for welded tubes and pipes - Specification (Second Revision)

GRADE 1 -6 . TABLE 1,2

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8 & Table 3(UTM)	-	1000	-
Cl 9(Press)	-	1000	-
Cl 11(Workmanship)	-	500	-
Cl 12 & 13(Length, Width & Thickness)	-	1000	-
Cl 8 & Table 3(UTM)	-	1000	-
Cl 9(Press)	-	1000	-
Cl 11(Workmanship)	-	500	-
Cl 12 & 13(Length, Width & Thickness)	-	1000	-
Cl 8 & Table 3(UTM)	-	1000	-
Cl 9(Press)	-	1000	-
Cl 11(Workmanship)	-	1000	-
Cl 12 & 13(Length, Width & Thickness)	-	1000	-
7.1(Carbon %)	-	500	-
7.1(Manganese %)	-	500	-
7.1(Phosphorus %)	-	500	-
7.1(Sulphur %)	-	500	-
7.1(Silicon %)	-	500	-
7.1( Copper %)	-	200	-
7.1( Aluminium %)	-	500	-
7.1( Nb)	-	200	-
7.1(V)	-	200	-
7.1( Ti)	-	200	-
7.1(Cr)	-	200	-
7.1(Mo)	-	200	-
7.1(Ni)	-	200	-
7.1( Nitrogen%)	-	500	-
7.1(CE)	-	500	-
7.1(Carbon %)	-	0	-
7.1(Manganese %)	-	0	-
7.1(Phosphorus %)	-	0	-
Table 1 ( Clauses 7.1 ,7.2 )(TITANIUM)	-	0	-
Table 1 ( Clauses 7.1 ,7.2 )(VANADIUM)	-	0	-
Cl. 14(Weight)	-	0	-
Cl. 12, 13(Camber)	-	300	-
Cl. 12, 13(Thickness)	-	500	-
Cl. 8, Table 3(Elongation)	-	500	-
Cl. 8, Table 3(Yield Stress)	-	500	-
Cl 12 & 13(Length, Width & Thickness)	-	0	-
Cl 11(Workmanship)	-	0	-
15.0 & 15.1(Coil edges - IS:10748)	-	100	-
15.0 & 15.2(Surface finish - IS:10748)	-	100	-
15.0 & 15.5(Telescopicity - IS:10748)	-	50	-
15(Condition of Coil)	-	50	-
16(Marking)	-	100	-
3.4(Vehicle Fuel System)	-	0	-
9(Protective Treatment)	-	100	-
Table 1 ( Clauses 7.1 ,7.2 )(Tungsten (W))	-	200	-
Table 1 ( Clauses 7.1 ,7.2 )(Boron (B))	-	200	-
7.1(Sulphur %)	-	0	-
7.1(Silicon %)	-	0	-
7.1( Copper %)	-	100	-
7.1( Aluminium %)	-	200	-
7.1( Nb)	-	0	-
7.1(V)	-	0	-
7.1( Ti)	-	0	-
7.1(Cr)	-	0	-
7.1(Mo)	-	0	-
7.1(Ni)	-	0	-
7.1( Nitrogen%)	-	0	-
7.1(CE)	-	0	-
7.1(Carbon %)	-	0	-
7.1(Manganese %)	-	0	-
7.1(Phosphorus %)	-	0	-
7.1(Sulphur %)	-	0	-
7.1(Silicon %)	-	0	-
7.1( Copper %)	-	0	-
7.1( Aluminium %)	-	0	-
7.1( Nb)	-	0	-
7.1(V)	-	0	-
7.1( Ti)	-	0	-
7.1(Cr)	-	0	-
7.1(Mo)	-	0	-
7.1(Ni)	-	0	-
7.1( Nitrogen%)	-	0	-
7.1(CE)	-	0	-
Table 1 ( Clauses 7.1 ,7.2 )(NIOBIUM)	-	0	-
Table 1 ( Clauses 7.1 ,7.2 )(CARBON EQUIVELENT )	-	0	-
Table 1 ( Clauses 7.1 ,7.2 )(Molybdenum)	-	0	-
Table 1 ( Clauses 7.1 ,7.2 )(Chromium)	-	0	-
Table 1 ( Clauses 7.1 ,7.2 )(Nickel)	-	0	-
Table 1 ( Clauses 7.1 ,7.2 )( ALUMINIUM)	-	0	-
Table 1 ( Clauses 7.1 ,7.2 )(SILICON)	-	0	-
Table 1 ( Clauses 7.1 ,7.2 )(NITROGEN)	-	0	-
Table 1 ( Clauses 7.1 ,7.2 )(MANGANESE)	-	0	-
Table 1 ( Clauses 7.1 ,7.2 )(PHOSPHURS)	-	0	-
Table 1 ( Clauses 7.1 ,7.2 )(SULPHUR)	-	0	-
Table 1 ( Clauses 7.1 ,7.2 )( CARBON)	-	0	-
Cl 9(Press)	-	0	-
Cl 8 & Table 3(UTM)	-	0	-
Cl 8 & Table 3(UTM)	-	0	-
Cl 9(Press)	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 12 & 13(Length, Width & Thickness)	-	0	-
7.0 (7)(Micro Alloying elements - IS:8811)	-	0	-
8.0 (1)(Tensile Strength-IS:1608(P1))	-	0	-
8.0 (2)(Yield Strength-IS:1608(P1))	-	0	-
8.0 (3)(Elongation on 5.65 SoA GL-IS:1608(P1))	-	0	-
12 (1)(Width - SOP MT-23)	-	0	-
12 (2)(Thickness- SOP MT-23)	-	0	-
12 (3)(Mass of Strip- SOP MT-23)	-	0	-
Cl 8 & Table 3(UTM)	-	0	-
Cl 9(Press)	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 12 & 13(Length, Width & Thickness)	-	0	-
Cl 8 & Table 3(UTM)	-	0	-
Cl 9(Press)	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 12 & 13(Length, Width & Thickness)	-	0	-
Cl 8 & Table 3(UTM)	-	0	-
Cl 9(Press)	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 12 & 13(Length, Width & Thickness)	-	0	-
7.1(Carbon %)	-	0	-
7.1(Manganese %)	-	0	-
7.1(Phosphorus %)	-	0	-
7.1(Sulphur %)	-	0	-
7.1(Silicon %)	-	0	-
7.1( Copper %)	-	0	-
7.1( Aluminium %)	-	0	-
7.1( Nb)	-	0	-
7.1(V)	-	0	-
7.1( Ti)	-	0	-
7.1(Cr)	-	0	-
7.1(Mo)	-	0	-
7.1(Ni)	-	0	-
7.1( Nitrogen%)	-	0	-
7.1(CE)	-	0	-
7.1(Carbon %)	-	0	-
7.1(Manganese %)	-	0	-
7.1(Phosphorus %)	-	0	-
Cl. 14(Weight)	-	0	-
Cl. 12, 13(Camber)	-	0	-
Cl. 12, 13(Thickness)	-	0	-
Cl. 8, Table 3(Elongation)	-	0	-
Cl. 8, Table 3(Yield Stress)	-	0	-
Cl 12 & 13(Length, Width & Thickness)	-	0	-
Cl 11(Workmanship)	-	0	-
15.0 & 15.1(Coil edges - IS:10748)	-	0	-
15.0 & 15.2(Surface finish - IS:10748)	-	0	-
15.0 & 15.5(Telescopicity - IS:10748)	-	0	-
15(Condition of Coil)	-	0	-
16(Marking)	-	0	-
3.4(Vehicle Fuel System)	-	0	-
9(Protective Treatment)	-	0	-
Table 1 ( Clauses 7.1 ,7.2 )(Tungsten (W))	-	0	-
Table 1 ( Clauses 7.1 ,7.2 )(Boron (B))	-	0	-
7.1(Sulphur %)	-	0	-
7.1(Silicon %)	-	0	-
7.1( Copper %)	-	0	-
7.1( Aluminium %)	-	0	-
7.1( Nb)	-	0	-
7.1(V)	-	0	-
7.1( Ti)	-	0	-
7.1(Cr)	-	0	-
7.1(Mo)	-	0	-
7.1(Ni)	-	0	-
7.1( Nitrogen%)	-	0	-
7.1(CE)	-	0	-
7.1(Carbon %)	-	0	-
7.1(Manganese %)	-	0	-
7.1(Phosphorus %)	-	0	-
7.1(Sulphur %)	-	0	-
7.1(Silicon %)	-	0	-
7.1( Copper %)	-	0	-
7.1( Aluminium %)	-	0	-
7.1( Nb)	-	0	-
7.1(V)	-	0	-
7.1( Ti)	-	0	-
7.1(Cr)	-	0	-
7.1(Mo)	-	0	-
7.1(Ni)	-	0	-
7.1( Nitrogen%)	-	0	-
7.1(CE)	-	0	-
Cl 9(Press)	-	0	-
Cl 8 & Table 3(UTM)	-	0	-
Cl 8 & Table 3(UTM)	-	0	-
Cl 9(Press)	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 12 & 13(Length, Width & Thickness)	-	0	-
7.0 (7)(Micro Alloying elements - IS:8811)	-	0	-
8.0 (1)(Tensile Strength-IS:1608(P1))	-	0	-
8.0 (2)(Yield Strength-IS:1608(P1))	-	0	-
8.0 (3)(Elongation on 5.65 SoA GL-IS:1608(P1))	-	0	-
12 (1)(Width - SOP MT-23)	-	0	-
12 (2)(Thickness- SOP MT-23)	-	0	-
12 (3)(Mass of Strip- SOP MT-23)	-	0	-

30 Mar, 2027

-
Included w.e.f 12.12.2024

9985

CIPET, Vijayawada

6141334

IS 11652 (2017)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg cement – Specification (third revision)

NIL

29930 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	500	NIL
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	500	NIL
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	500	NIL
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	500	NIL
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	0	NIL
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	0	NIL
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	0	NIL
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	500	NIL
4.1(Raw Material )	-	1050	NIL
4.2 (Fabric)	-	500	NIL
4.2 (Linear Density, 900 denier)	-	500	NIL
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	0	NIL
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	0	NIL
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	0	NIL
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	0	NIL
4.3(Sacks)	-	500	NIL
4.4(Seam )	-	500	NIL
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	500	NIL
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	0	NIL
4.4(Seam The stitching shall be done with double fold over seam to)	-	500	NIL
4.4(to a depth of minimum 25 mm, so that so that)	-	0	NIL
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	0	NIL
4.4(The number of stitches/dm shall be 14 ± 2.)	-	0	NIL
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	1050	NIL
4.4(Seam)	-	0	NIL
4.5(Lamination )	-	1050	NIL
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	500	NIL
4.7(Valve for Filling of Sacks)	-	500	NIL
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	0	NIL
5/5.6 (UV Resistance, )	-	10180	NIL
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	1300	NIL
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	1300	NIL
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	1300	NIL
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	1300	NIL
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	0	NIL
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	0	NIL
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	1100	NIL
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	1200	NIL
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	0	NIL
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	1300	NIL
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	1300	NIL

06 Jun, 2027

-
-

9986

CIPET, Vijayawada

6141334

IS 15450 (2022)

Polyethylene-aluminium-polyethylene composite pressure pipes for hot and cold water supplies Specifications first revision of IS 15450

PE-AL-PE 12 to 75mm

50175 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(MATERIALS)	-	5625	NIL
6(PRESSURE RATING)	-	500	NIL
7(NOMINAL DIAMETERS)	-	500	NIL
8(COLOUR)	-	500	NIL
9(DIMENSIONS OF PIPE)	-	500	NIL
10(VISUAL APPEARANCE)	-	500	NIL
11.1(Density (Method of test as per Table 3))	-	700	NIL
11.2(Melt Flow Rate (Method of test as per Table 3))	-	1100	NIL
11.3(Overall Migration)	-	2200	NIL
11.4(Thermal Stability to Oxidation (Method of test as per Table 3))	-	2200	NIL
11.5(Carbon Black Content and Dispersion (Method of test as per Table 3))	-	1625	NIL
11.6(Pigment Dispersion (For Coloured Pipes) (Method of test as per Table 3))	-	700	NIL
11.8(Adhesion Test)	-	1600	NIL
11.7(Resistance to Weathering)	-	16500	NIL
11.9(Apparent Tensile Strength of Pipe)	-	1800	NIL
11.10(Minimum Burst Pressure)	-	1000	NIL
11.11(Hydraulic Characteristics)	-	0	NIL
Table 3(Anti-oxidant (as per IS 2530))	-	500	NIL
14(MARKING)	-	500	NIL
5.1(MATERIALS)	-	0	NIL
5.2.1(MATERIALS)	-	0	NIL
5.2.1.1(The other constituents)	-	925	NIL
5.3.1(UV Stabilizer)	-	0	NIL
5.3.2(UV Stabilizer)	-	0	NIL
11.11.1(Short Term Hydrostatic Tests)	-	3200	NIL
11.11.12(Long Term Hydrostatic Test)	-	5300	NIL
5.4(Aluminium)	-	0	NIL
5.5(REWORK Material)	-	0	NIL
6(PRESSURE RATING)	-	0	NIL
12.1(Type Test)	-	2200	NIL
7(NOMINAL DIAMETERS)	-	0	NIL
8(COLOUR)	-	0	NIL
9.1(DIMENSIONS OF PIPE)	-	0	NIL
9.2.1(Method of Measurements)	-	0	NIL
9.3(Length of Straight Pipe)	-	0	NIL
9.4(Coiling)	-	0	NIL
10(VISUAL APPEARANCE)	-	0	NIL
11.1(Density)	-	0	NIL
11.3(Melt Flow Rate)	-	0	NIL
11.4(Thermal Stability to Oxidation)	-	0	NIL
11.5(Carbon Black Content and Dispersion)	-	0	NIL
11.6(Pigment Dispersion (For Coloured Pipes))	-	0	NIL
11.7(Resistance to Weathering)	-	0	NIL
11.8(Adhesion Test)	-	0	NIL
11.9(Apparent Tensile Strength of Pipe)	-	0	NIL
11.1(Minimum Burst Pressure)	-	0	NIL
11.3(Overall Migration)	-	0	NIL

06 Jun, 2027

-
Included w.e.f. 23.08.2024

9987

CIPET, Vijayawada

6141334

IS 14333 (2022)

Polyethylene Pipes for Sewerage and Industrial Chemicals and Effluent ï¿½ Specification (First Revision)

GRADE PE 63,80,100, PN 2.5,4,6,10,12.5 SIZE 63-1000MM

55575 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.1,T2("Base Density (At 27°C Temp.)-IS 7328:2020 ")	-	1325	Nil
5.2.1,T2(Melt Flow Rate (At 190°C /5kg)-IS 2530:1963)	-	1100	Nil
5.2.1,T2(Thermal Stability(Oxidation Induction Time)-IS 4984:2016(Annexure-B))	-	2200	Nil
5.2.1,T2("Volatile Matter- IS 4984:2016 (Annexure-C)")	-	700	Nil
5.3(Ash content- Any Method)	-	1200	Nil
5.2.1.1, T2("Compound carbon black -IS 2530:1963 content")	-	925	Nil
6.2(Colour- IS 14333-2022)	-	500	Nil
7.1(Visual Appearance- IS 14333-2022)	-	500	Nil
7.2(Length- IS 14333-2022)	-	500	Nil
7.4,T3 of IS 4984(Outside Diameter-IS 4984-2016)	-	500	Nil
7.4,T4 of IS 4984(wall Thickness-IS 4984-2016)	-	0	Nil
7.4,T3 of IS 4984(Ovality-IS 4984-2016)	-	0	Nil
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 27 oC , Test Period - 100 hrs.-IS 4984-2016 (Annexure-E))	-	4000	Nil
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 48 hrs.-IS 4984-2016 (Annexure-E))	-	1600	Nil
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 165 hrs.-IS 4984-2016 (Annexure-E))	-	4800	Nil
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 1000 hrs.-IS 4984-2016 (Annexure-E))	-	11000	Nil
8.1.2, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 48 hrs.-IS 4984-2016 (Annexure-E))	-	1600	Nil
8.2("Longitudinal Reversion Test - IS 4984-2016 (Annexure-F)")	-	1200	Nil
8.3(Carbon black content- IS 2530-1963)	-	925	Nil
8.3(Carbon black content Dispersion- IS 2530-1963)	-	700	Nil
8.4(Melt Flow rate(Temperature - 190oC,Mass 5kg)-IS 2530-1963)	-	1100	Nil
8.5(Oxidation Induction Time -IS 4984:2016(Annexure-B))	-	2200	Nil
8.6(Density-IS 7328:2020)	-	700	Nil
8.7("Tensile Strength for Butt Fusion - IS 4984-2016 (Annexure-G)")	-	1800	Nil
8.8,T5("Tensile - IS 4984-2016 (Annexure-H)")	-	1800	Nil
8.8,T5("Elongation -IS 4984-2016 (Annexure-H)")	-	0	Nil
8.9(Slow Crack Growth Rate{Internal Pressure creep Rupture test, Temperature - 80±1 oC , Test Pressure – 0.80MPa, Test Period - 500 hrs.-IS 4984-2016 (Annexure-E &J))	-	6000	Nil
5.2.1,T2("Water Content-IS 4984:2016 (Annexure-D)")	-	700	Nil
5.3(Density of Higher olefin - IS 7328:2020)	-	700	Nil
5.2.1.1, T2(Compound Toluene extract - Any Method)	-	900	Nil
5.2.1.1, T2(Compound carbon black particle size- Any Method)	-	3000	Nil
5.2.1.1, T2(Compound Density-IS 7328:2020)	-	700	Nil
5.2.1.1, T2(Compound ash content - Any Method)	-	0	Nil
5.2.1.1, T2("Compound carbon black -IS 2530:1963 dispersion")	-	0	Nil
5.3(Loading of Carbon Black - IS 2530:1963)	-	0	Nil
5.3("Maximum volatile matter -IS 4984:2016 (Annexure-C)")	-	700	Nil
5.4(Antioxidant - Any Method)	-	0	Nil
6(Pipe Description - IS 14333-2022)	-	0	Nil
7.3(Coiling- IS 14333-2022)	-	0	Nil
5.2.1.1, T2(Compound maximum volatile matter -IS 4984:2016 (Annexure-C))	-	0	Nil
5.3(Olefin Constituents- 14333-2022)	-	0	Nil
5.3(Toluene extract - Any Method)	-	0	Nil
5.3(Carbon black particle size - Any Method)	-	0	Nil

06 Jun, 2027

-
Included w.e.f. 23.08.2024

9988

CIPET, Vijayawada

6141334

IS 14885 (2022)

Polyethylene Pipes for the Supply of Gaseous Fuels ï¿½ Specification (First Revision)

GRADE PE 80 & 100, SIZE 16-630, SDR 17,13.6,11,9

511700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Grade of material)	-	1100	Nil
4.3(Nominal Diameter)	-	500	Nil
4.4(Colour)	-	500	Nil
5.3(Anti-oxidant)	-	700	Nil
6.1(Mean out side Diameter (For less than or equal to 25 mm- Average of 8 , For higher diameters average of 6))	-	500	Nil
6.1(Out of Roundness (Ovality))	-	500	Nil
7(Finish)	-	500	Nil
6.2(Wall thickness (Take 8 reading and Average will be repoted))	-	500	Nil
8.1(Internal pressure creep rupture test for plain at 80 deg. C for 165h)	-	5300	Nil
8.1(Internal pressure creep rupture test for plain pipes at 20 deg. C for 100h)	-	4500	Nil
8.1(Internal pressure creep rupture test for plain pipes at 80 deg. C for 1000 h)	-	11000	Nil
8.2(Reversion Test)	-	700	Nil
8.3(Density)	-	700	Nil
8.6(Thermal Stability (Oxidation Induction Time))	-	2200	Nil
8.7(Volatile Matter Content)	-	700	Nil
8.8(Tensile Properties (Tensile Yield Strength and Elongation at Break))	-	1800	Nil
6.4(Length of Pipe)	-	500	Nil
8.4(Melt Flow Rate (MFR))	-	1100	Nil
8.5(Pigment Dispersion)	-	700	Nil
8.10(Slow Crack Growth Rate Test)	-	10800	Nil
10(Marking)	-	500	Nil
5.6(Resistance to Weathering)	-	36000	Resistance to weathering (24months) (Outdoor)
8.11(Squeeze-off)	-	1300	Nil
5.1, 5.7 Table 2(iv) Volatile content)	-	700	NIL
5.1, 5.7 Table 2(iii) Thermal stability (oxidation induction time))	-	2200	NIL
5.1, 5.7 Table 2(vi) Pigment dispersion)	-	700	NIL
5.4(U-V stabilizer)	-	2500	NIL
5.1, 5.7 Table 2(i) Conventional density (of base polymer))	-	700	NIL
5.5(Effect of Gas condensate on the Hydrostatic strength)	-	5000	INCLUDING SPECIMEN CHARGES
5.1, 5.7 Table 2(ii) Melt flow rate (MFR))	-	1100	NIL
8.9(Resistance to Weathering)	-	15500	INCLUDING SPECIMEN CHARGES
5.7(PE Compound Quality Evaluation)	-	400000	LONG TERM TEST FOR 10000 HRS
5.1, 5.7 Table 2(v) Water content1))	-	700	NIL

06 Jun, 2027

-
Included w.e.f. 20.08.2024

9989

CIPET, Vijayawada

6141334

IS 17546 (2021)

Chlorinated polyvinyl chloride CPVC fittings for potable hot and cold water distribution supplies Specification

CPVC/FITTINGS/20mm to 150mm

163225 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Nominal Size(DN))	-	500	Nil
3.2(Nominal Outside Diameter)	-	2000	Nil
3.3(Mean Inside Diameter of Socket at Entry)	-	1400	Nil
3.4(Mean Inside Diameter of Socket at Shoulder (Bottom))	-	2000	Nil
3.4(Mean Inside Diameter of Socket at Shoulder (Bottom))	-	700	Nil
3.5(Out-of-Roundness (Ovality))	-	700	Nil
3.6(Nominal Wall Thickness)	-	700	Nil
3.7(Minimum Wall Thickness)	-	875	Nil
3.11(Type Tests)	-	15800	Nil
3.11(Acceptance Tests)	-	1100	Nil
7(Dimensions of fitting)	-	850	Nil
8.2(Opacity)	-	1100	Nil
8.1(Visual Appearance)	-	1275	Nil
8.3(Stress Relief Test)	-	2000	Nil
8.4(Vicat softening Temperature)	-	1100	Nil
8.5(Density)	-	1500	Nil
8.6(Effect on water)	-	3000	Nil
9(Mechanical Properties)	-	16900	Nil

06 Jun, 2027

-
Included w.e.f. 22.12.2023. Size 15-150 mm SDR- 11.17

9990

CIPET, Vijayawada

6141334

IS 15532 (2004)

Plastics crates for fruits and vegetables - Specification

PLASTIC CRATES

10900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Material)	-	2000	NIL
3.5(Appearance and Surface Finish)	-	500	NIl
3.3(Shape, Dimensions and Design)	-	500	NIL
3.4(Mass)	-	500	NIL
3.6(Dimensional Stability)	-	700	NIL
3.7(Confluence Line Strength)	-	1100	NIl
3.8.1(Compressive Strength (Resistance to Applied Load))	-	1100	NIL
3.8.2(Resistance to Drop)	-	1100	NIL
3.9(Resistance to Environmental Stress Cracking)	-	1200	NIL
3.10.2(Free-Fall Test)	-	2200	NIL

06 Jun, 2027

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number