BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15122 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

9991

Delta Testing and Research Laboratories Private Limited (C5)

9179506

IS 2185 : Part 1 (2005)

Concrete masonry units - Specification: Part 1 hollow and solid concrete blocks (Third Revision)

17500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.1(PHYSICAL REQUIREMENTS-General)	-	1000	10 % Discount to BIS for others 1.5 times of mentioned testing charges.
9.2 & 4.2(PHYSICAL REQUIREMENTS-Nominal Dimensions 1.Length 2.Hight 3. Width)	-	1000	10 % Discount to BIS for others 1.5 times of mentioned testing charges.
9.2 & 4.2.3(Nominal Dimensions-variation in the length of units )	-	1000	10 % Discount to BIS for others 1.5 times of mentioned testing charges.
9.2 & 4.2.3(Nominal Dimensions -variation in height and width of units )	-	1000	10 % Discount to BIS for others 1.5 times of mentioned testing charges.
9.2 & 4.2.4, Table-1(Nominal Dimensions-thickness of the face shell)	-	1000	10 % Discount to BIS for others 1.5 times of mentioned testing charges.
9.2 & 4.2.4, Table-1(Nominal Dimensions-thickness of the Web shell)	-	1000	10 % Discount to BIS for others 1.5 times of mentioned testing charges.
9.3 & 5.1 & 5.2 Table 2(PHYSICAL REQUIREMENTS-Blocks Density - 1.Hollow (Open and Closed Cavity) Concrete Block- Grade Aor Grade B 2.Solid Concrete Block — Grade C)	-	2000	10 % Discount to BIS for others 1.5 times of mentioned testing charges.
9.4- Table 2(PHYSICAL REQUIREMENTS - Compressive Strength 1.Minimum Average Compressive Strength of Units 2.Minimum Average Compressive Strength of Individual Unit)	-	5000	10 % Discount to BIS for others 1.5 times of mentioned testing charges.
9.5(PHYSICAL REQUIREMENTS -Water Absorption)	-	2500	10 % Discount to BIS for others 1.5 times of mentioned testing charges.
9.6(PHYSICAL REQUIREMENTS -Drying Shrinkage)	-	2500	10 % Discount to BIS for others 1.5 times of mentioned testing charges.
9.7(PHYSICAL REQUIREMENTS -Moisture Movement)	-	2500	10 % Discount to BIS for others 1.5 times of mentioned testing charges.
15(Marking)	-	500	10 % Discount to BIS for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
-

9992

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 734 (1975)

Specification for wrought aluminium and aluminium alloy forging stock and forgings (For General Engineering Purposes) (Second Revision)

16000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1 table 1(chemical composition)	-	8000	-
5.1 table 2(0.2% proof strength)	-	2000	-
5.1 table 2(Tensile strength)	-	3000	-
5.1 table 2(Elongation)	-	2000	-
5.1 table 1(chemical composition)	-	8000	-
5.1 table 2(0.2% proof strength)	-	2000	-
5.1 table 2(Tensile strength)	-	3000	-
5.1 table 2(Elongation)	-	2000	-
Cl.5.1(Aluminium - IS 504 and its parts or any other intrumental/chemical methods)	-	800	-
Cl.5.1(Copper - IS 504 and its parts or any other intrumental/chemical methods)	-	800	-
Cl.5.1(Magnesium - IS 504 and its parts or any other intrumental/chemical methods)	-	800	-
Cl.5.1(Silicon - IS 504 and its parts or any other intrumental/chemical methods)	-	800	-
Cl.5.1(Iron - IS 504 and its parts or any other intrumental/chemical methods)	-	800	-
Cl.5.1(Manganese - IS 504 and its parts or any other intrumental/chemical methods)	-	800	-
Cl.5.1(Zinc - IS 504 and its parts or any other intrumental/chemical methods)	-	800	-
Cl.5.1(Titanium And/or Other Grain Refining Elements - IS 504 and its parts or any other intrumental/chemical methods)	-	800	-
Cl.5.1(Chromium - IS 504 and its parts or any other intrumental/chemical methods)	-	800	-
Cl.5.1(Remarks (Cu + Mg + Si + Fe + Mn + Zn) - IS 504 and its parts or any other intrumental/chemical methods)	-	800	-
4.1(Freedom from defects)	-	1000	-
9.1(Tensile test)	-	3000	-

-
Included w.e.f. 04.04.2024

9993

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 7092 : Part 2 (1987)

Specification for aluminium alloy tube for irrigation purposes: Part 2 extruded tube (Second Revision)

18100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4(Workmanship & Finish)	-	200	-
Cl.6.2(Ultimate Tensile Strength- IS 2657)	-	2500	-
Cl.6.2(0.2 percent proof strength- IS 2657)	-	2000	-
Cl.6.2(Elongation on 50 mm gauge length- IS 2657)	-	1000	-
Cl. 6.3(Drift Expanding Test ( Expanded Inside Diameter- IS 2335)	-	2500	-
Cl. 6.4(Hydrostatic Pressure Test-Cl. 6.4)	-	3000	-
Cl.7.1, Table 2(Outside Diameter-)	-	800	-
Cl.7.1, Table 2(Roundness or Ovality)	-	800	-
Cl.7.1, Table 2(Wall Thickness)	-	800	-
Cl. 7.2(Length)	-	800	-
Cl. 6.1(Copper- IS 504 or any other established instrumental/ chemical method)	-	300	-
Cl. 6.1(Magnesium- IS 504 or any other established instrumental/ chemical method)	-	300	-
Cl. 6.1(Silicon- IS 504 or any other established instrumental/ chemical method)	-	300	-
Cl. 6.1(Iron- IS 504 or any other established instrumental/ chemical method)	-	300	-
Cl. 6.1(Manganese- IS 504 or any other established instrumental/ chemical method)	-	300	-
Cl. 6.1(Zinc- IS 504 or any other established instrumental/ chemical method)	-	300	-
Cl. 6.1(Chromium- IS 504 or any other established instrumental/ chemical method)	-	300	-
Cl. 6.1(Titanium and/ other grain refining elements)	-	300	-
Cl. 6.1(Aluminium- IS 504 or any other established instrumental/ chemical method)	-	300	-
9.1(Marking)	-	500	-
14(Workmanship & Finish)	-	200	-
7.1(Dimensions)	-	3200	-
6.2(Mechanical properties)	-	2500	-
6.3(Drift Expanding Test)	-	2500	-
6.4(Drift Expanding Testt)	-	2500	-
5.3.2(hydrostatic pressure test)	-	3000	-
6.3(Drift expanding test)	-	2500	-
7.1 table 2(Dimensions and tolerances for extruded tubes)	-	3200	-
6.1(chemical composition)	-	3200	-
6.2(ultimate tensile strength)	-	2500	-
6.2(0.2% proof strength)	-	2000	-
6.2(Elongation on 50 mm gauge length)	-	1000	-

-
Included w.e.f. 04.04.2024

9994

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 7092 : Part 1 (1992)

Aluminium alloy tubes for irrigation purposes - Specification: Part 1 welded tubes (Second Revision)

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10(Marking)	-	1000	-
5(Workmanship and Finish)	-	1000	-
8(Dimensions)	-	4000	-
7.2(Mechanical properties)	-	5000	-
7.3(Flattening test)	-	3000	-
7.4(Hydrostatic test)	-	4000	-

-
Included w.e.f. 04.04.2024

9995

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 1254 (2007)

Corrugated aluminium sheet (Fourth Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(FREEDOM FROM DEFECTS)	-	500	-
4(SUPPLY OF MATERIAL)	-	500	-
5(PROFILE)	-	500	-
6(MATERIAL)	-	7000	-
7.2(WIDTH)	-	1000	-
7.3(LENGTH)	-	1000	-
7.4(SQUARENESS)	-	1000	-
7.5(Depth and Pitch of the Corrugation)	-	2500	-
8(FINISH)	-	500	-
9(MARKING)	-	500	-
3(FREEDOM FROM DEFECTS)	-	-	-
4(SUPPLY OF MATERIAL)	-	-	-
5(PROFILE)	-	-	-
6(MATERIAL)	-	-	-
7.2(WIDTH)	-	-	-
7.3(LENGTH)	-	-	-
7.4(SQUARENESS)	-	-	-
7.5(Depth and Pitch of the Corrugation)	-	-	-
8(FINISH)	-	-	-
9(MARKING)	-	-	-

-
-

9996

Indian Institute of Packaging (IIP), Delhi

8177901

IS 1783 : Part 2 (2014)

Drums large, fixed ends - Specification: Part 2 grade B drums (Fourth Revision)

40500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Capacity)	-	600	-
5(Dimensions (Type 1 C Drums Figure 1))	-	550	-
5(Dimensions (Type 1 C Drums Figure 1))	-	550	-
5(Dimensions (Type 1 C Drums Figure 1))	-	550	-
5(Dimensions (Type 1 C Drums Figure 1))	-	550	-
5(Dimensions (Type 1 C Drums Figure 1))	-	550	-
5(Dimensions (Type 1 C Drums Figure 1))	-	550	-
5(Dimensions (Type 1 C Drums Figure 1))	-	550	-
5(Dimensions (Type 1 C Drums Figure 1))	-	550	-
5(Dimensions (Type 1 D Drums Figure 1))	-	550	-
5(Dimensions (Type 1 D Drums Figure 1))	-	550	-
5(Dimensions (Type 1 D Drums Figure 1))	-	550	-
5(Dimensions (Type 1 D Drums Figure 1))	-	550	-
5(Dimensions (Type 1 D Drums Figure 1))	-	550	-
5(Dimensions (Type 1 D Drums Figure 1))	-	550	-
5(Dimensions (Type 1 D Drums Figure 1))	-	550	-
5(Dimensions (Type 1 D Drums Figure 1))	-	550	-
5(Dimensions (Type 1 C Drums Figure 2))	-	550	-
5(Dimensions (Type 1 C Drums Figure 2))	-	550	-
5(Dimensions (Type 1 C Drums Figure 2))	-	550	-
5(Dimensions (Type 1 C Drums Figure 2))	-	550	-
5(Dimensions (Type 1 C Drums Figure 2))	-	550	-
5(Dimensions (Type 1 C Drums Figure 2))	-	550	-
5(Dimensions (Type 1 C Drums Figure 2))	-	550	-
5(Dimensions (Type 1 C Drums Figure 2))	-	550	-
5(Dimensions (Type 1 D Drums Figure 2))	-	550	-
5(Dimensions (Type 1 D Drums Figure 2))	-	550	-
5(Dimensions (Type 1 D Drums Figure 2))	-	550	-
5(Dimensions (Type 1 D Drums Figure 2))	-	550	-
5(Dimensions (Type 1 D Drums Figure 2))	-	550	-
5(Dimensions (Type 1 D Drums Figure 2))	-	550	-
5(Dimensions (Type 1 D Drums Figure 2))	-	550	-
5(Dimensions (Type 1 D Drums Figure 2))	-	550	-
6(Material)	-	550	-
7(Construction)	-	600	-
7.1(Construction)	-	600	-
7.2(Construction)	-	600	-
7.3(Construction)	-	600	-
7.4(Construction)	-	600	-
7.5(Construction)	-	600	-
7.7(Construction)	-	600	-
8(Finish )	-	600	-
9.1(Leakage at air pressure )	-	800	-
9.2(Drop Test)	-	2200	-
9.3(Hydraulic Pressure Test)	-	1200	-
5(Dimensions (Type 2 C Drums Figure 2))	-	550	-
5(Dimensions (Type 2 C Drums Figure 2))	-	550	-
5(Dimensions (Type 2 C Drums Figure 2))	-	550	-
5(Dimensions (Type 2 C Drums Figure 2))	-	550	-
5(Dimensions (Type 2 C Drums Figure 2))	-	550	-
5(Dimensions (Type 2 C Drums Figure 2))	-	550	-
5(Dimensions (Type 2 C Drums Figure 2))	-	550	-
5(Dimensions (Type 2 C Drums Figure 2))	-	550	-
5(Dimensions (Type 2 C Drums Figure 2))	-	550	-
5(Dimensions (Type 2 C Drums Figure 2))	-	550	-
5(Dimensions (Type 2 D Drums Figure 2))	-	550	-
5(Dimensions (Type 2 D Drums Figure 2))	-	550	-
5(Dimensions (Type 2 D Drums Figure 2))	-	550	-
5(Dimensions (Type 2 D Drums Figure 2))	-	550	-
5(Dimensions (Type 2 D Drums Figure 2))	-	550	-
5(Dimensions (Type 2 D Drums Figure 2))	-	550	-
5(Dimensions (Type 2 D Drums Figure 2))	-	550	-
5(Dimensions (Type 2 D Drums Figure 2))	-	550	-
5(Dimensions (Type 2 D Drums Figure 2))	-	550	-
5(Dimensions (Type 2 D Drums Figure 2))	-	550	-
5(Dimensions (Type 2 D Drums Figure 2))	-	550	-
6(Material)	-	600	-
6(Material)	-	600	-

-
-

9997

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 733 (1983)

Specification for wrought aluminium and aluminium alloy bars, rods and sections (For General Engineering Purposes) (Third Revision)

0 -100 mm

8100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4(Freedom from Defects)	-	500	-
Cl. 5.1, Table 2(0.2 Percent proof stress- IS 1816)	-	500	-
Cl. 5.1, Table 2(Tensile Strength- IS 1816)	-	1000	-
Cl. 5.1, Table 2(Elongation on 50 mm or 5.65√So Gauge Length)	-	500	-
Cl. 0.4, 5.1, Table 1(Aluminium- IS 504 or by any other suitable instrumental method)	-	300	-
Cl. 0.4, 5.1, Table 1(Copper- IS 504 or by any other suitable instrumental method)	-	300	-
Cl. 0.4, 5.1, Table 1(Magnesium- IS 504 or by any other suitable instrumental method)	-	300	-
Cl. 0.4, 5.1, Table 1(Silicon- IS 504 or by any other suitable instrumental method)	-	300	-
Cl. 0.4, 5.1, Table 1(Iron- IS 504 or by any other suitable instrumental method)	-	300	-
Cl. 0.4, 5.1, Table 1(Zinc- IS 504 or by any other suitable instrumental method)	-	300	-
Cl. 0.4, 5.1, Table 1(Aluminium- IS 504 or by any other suitable instrumental method)	-	300	-
Cl. 0.4, 5.1, Table 1(Titanium and / or other grain refining elements - IS 504 or by any other suitable instrumental method)	-	300	-
Cl. 0.4, 5.1, Table 1(Chromium- IS 504 or by any other suitable instrumental method)	-	300	-
Cl. 0.4, 5.1, Table 1(Ti+ V- IS 504 or by any other suitable instrumental method)	-	600	-
Cl. 0.4, 5.1, Table 1(Total Impurities- IS 504 or by any other suitable instrumental method)	-	1000	-
Cl. 0.4, 5.1, Table 1(Cr+ Mn- IS 504 or by any other suitable instrumental method)	-	600	-
7(Dimension - IS 3965)	-	500	-
11(Marking)	-	200	-
Table-1, Clause - 5.1(Copper)	-	300	-
Table-1, Clause - 5.1(Iron)	-	300	-
Table-1, Clause - 5.1(Magnesium)	-	300	-
Table-1, Clause - 5.1(Manganese)	-	300	-
Table-1, Clause - 5.1(Titanium)	-	300	-
Table-1, Clause - 5.1(Silicon)	-	300	-
Table-1, Clause - 5.1(Chromium)	-	300	-
Table-1, Clause - 5.1(Zinc)	-	300	-

-
Included w.e.f. 04.04.2024

9998

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 736 (1986)

Specification for wrought aluminium and aluminium alloy plate for general engineering purposes (Third Revision)

ALUMINIUM PLATE

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Freedom from defect)	-	1000	-
5(chemical composition)	-	12000	-
6.1 table 2(0.2% proof strength)	-	1500	-
6.1 table 2(tensile strength)	-	2000	-
6.1 table 2(Elongation)	-	1500	-
8(Dimensions & Tolerances)	-	2000	-
4(Freedom from defect)	-	1000	-
5(chemical composition)	-	12000	-
6.1 table 2(0.2% proof strength)	-	1500	-
6.1 table 2(tensile strength)	-	2000	-
6.1 table 2(Elongation)	-	1500	-
8(Dimensions & Tolerances)	-	2000	-
5.1, Table 1(Aluminium)	-	1200	-
5.1, Table 1(Copper)	-	1200	-
5.1, Table 1(Magnesium)	-	1200	-
5.1, Table 1(Silicon)	-	1200	-
5.1, Table 1(Iron)	-	1200	-
5.1, Table 1(Mangnese)	-	1200	-
5.1, Table 1(Zinc)	-	1200	-
5.1, Table 1(Titanium and /or other grain refining element)	-	1200	-
5.1, Table 1(Chromium)	-	1200	-
5.1, Table 1(Vanadium)	-	1200	-

-
Included w.e.f. 04.04.2024

9999

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 1285 (2023)

WROUGHT ALUMINIUM AND ALUMINIUM ALLOYS EXTRUDED ROUND TUBE AND HOLLOW SECTIONS FOR GENERAL ENGINEERINGPURPOSES SPECIFICATION

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1("The extruded round tube and hollow sections shall be sound and visually free from harmful defects. ")	-	200	-
6.2(Slight discoloration due to heat treatment, minor polishing marks and spiral marks due to roll straightening shall not be a cause for rejection.)	-	200	-
8("Dimensions and tolerances of the material shall be as laid down in the Indian Standards indicated below: a) Extruded round tube IS 2673; and b) Extruded hollow sections IS 6477.")	-	1000	-
9(" Extruded round tubes and hollow sections shall be made from alloys specified in IS 733. 9.2 The chemical analysis of the material shall be carried out either in accordance with the methods specified in IS 504 (Part 1 to 12) and IS 504 (Part 13 to 16) or by any other established instrumental/chemical method. In case of any dispute the method specified in relevant parts of IS 504 shall be used as referee method. However, when the method is not given in IS 504, the referee method shall be as agreed to between the purchaser and the manufacturer. ")	-	4400	-
10(Tensile test)	-	2200	-
Cl.9.1(Aluminium- IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Copper- IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Magnesium- IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Silicon- IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Iron- IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Manganese- IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Zinc- IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Titanium and/ or other grain refining elements- IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Chromium- IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Remarks (Ti+V) - IS 504 and its parts or any other intrumental/chemical methods)	-	600	-
Cl.9.1(Remarks (Cr+Mn) - IS 504 and its parts or any other intrumental/chemical methods)	-	600	-
Cl.9.1(Remarks (Total Impurities)- IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
6.1("The extruded round tube and hollow sections shall be sound and visually free from harmful defects. ")	-	200	-
6.2(Slight discoloration due to heat treatment, minor polishing marks and spiral marks due to roll straightening shall not be a cause for rejection.)	-	200	-
8("Dimensions and tolerances of the material shall be as laid down in the Indian Standards indicated below: a) Extruded round tube IS 2673; and b) Extruded hollow sections IS 6477.")	-	1000	-
9(" Extruded round tubes and hollow sections shall be made from alloys specified in IS 733. 9.2 The chemical analysis of the material shall be carried out either in accordance with the methods specified in IS 504 (Part 1 to 12) and IS 504 (Part 13 to 16) or by any other established instrumental/chemical method. In case of any dispute the method specified in relevant parts of IS 504 shall be used as referee method. However, when the method is not given in IS 504, the referee method shall be as agreed to between the purchaser and the manufacturer. ")	-	4400	-
10(Tensile test)	-	2200	-
Cl.9.1(Aluminium- IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Copper- IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Magnesium- IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Silicon- IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Iron- IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Manganese- IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Zinc- IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Titanium and/ or other grain refining elements- IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Chromium- IS 504 and its parts or any other intrumental/chemical methods)	-	600	-
Cl.9.1(Remarks (Ti+V) - IS 504 and its parts or any other intrumental/chemical methods)	-	600	-
Cl.9.1(Remarks (Cr+Mn) - IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.9.1(Remarks (Total Impurities)- IS 504 and its parts or any other intrumental/chemical methods)	-	500	-

-
-

10000

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 4026 (2023)

ALUMINIUM INGOTS BILLETS AND WIRE BARS EC GRADE

Aluminium billets/ingots/wire/bars

6100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(SHAPES AND SIZES)	-	2000	-
9, Table 1, i)(Aluminium, Min)	-	500	-
9, Table 1, ii)(Silicon)	-	200	-
9, Table 1, iii)(Iron)	-	200	-
9, Table 1, iv)(Copper)	-	200	-
9, Table 1, v)(Manganese)	-	200	-
9, Table 1, vi)(Magnesium)	-	200	-
9, Table 1, vii)(Chromium)	-	200	-
9, Table 1, viii)(Zinc)	-	200	-
9, Table 1, ix)(Titanium)	-	200	-
9, Table 1, x)(Boron)	-	200	-
9, Table 1, xi)(Gallium)	-	200	-
9, Table 1, xii)(Zirconium)	-	200	-
9, Table 1, xiii)(Titanium + Vanadium)	-	400	-
9, Table 1, xiv)(Other elements (each))	-	500	-
9, Table 1, xv)(Other elements (Total))	-	500	-

-
Included w.e.f. 03.04.2024

10001

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 6754 (1972)

Specification for aluminium alloy ingots for bearings

Aluminum alloys ingots

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(General requirements)	-	2000	-
3.1(Manufacture)	-	2000	-
4.1(Chemical composition)	-	5600	-
5.1(Shape and size)	-	2400	-
6(Freedom from Defects)	-	1500	-
7(Selection of Sample for chemical analysis)	-	500	-
8(Retest)	-	15000	-
9(Marking)	-	1000	-
Table-1, Clause - 4.1(Copper)	-	300	-
Table-1, Clause - 4.1(Magnesium)	-	300	-
Table-1, Clause - 4.1(Manganese)	-	300	-
Table-1, Clause - 4.1(Titanium)	-	300	-
Table-1, Clause - 4.1(Silicon)	-	300	-
Table-1, Clause - 4.1(Nickel)	-	300	-
Table-1, Clause - 4.1(Tin)	-	300	-
Table-1, Clause - 4.1(Other elements)	-	2000	-
Table-1, Clause - 4.1(Total of Fe+Si+Mn)	-	1000	-
Table-1, Clause - 4.1(Aluminium)	-	500	-

-
Included w.e.f. 03.04.2024

10002

BIS, Eastern Regional Laboratory (ERL)

None

IS 18531 (2023)

Textiles Jute and polypropylene blended bags for packing 50 kg food grains Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1.1 (Manfacture)	-
4.1.2 (Manfacture)	-
4.2 (Seam)	-
4.2 (Seam)	-
4.2 (Seam)	-
4.2 (Seam)	-
4.2 (Seam)	-
4.3 (Hemming at the Mouth)	-
4.3 (Hemming at the Mouth)	-
4.4 (Capacity)	-
4.5 (Freedom from Defects)	-
4.5 (Freedom from Defects)	-
4.5 (Freedom from Defects)	-
4.5 (Freedom from Defects)	-
4.5 (Freedom from Defects)	-
4.5 (Freedom from Defects)	-
4.5 (Freedom from Defects)	-
5.1, Table 1 (Outside length,cm)	-
5.1, Table 1 (Outside width,cm)	-
5.1, Table 1 (Ends/dm)	-
5.1, Table 1 (Picks/dm)	-
5.1, Table 1 (Corrected mass/bag, g)	-
5.1, Table 1 (Average breaking strength - Warpway)	-
5.1, Table 1 (Average breaking strength - Weftway)	-
5.1, Table 1 (Average seam strength)	-
5.1, Table 1 (Moisture content,%)	-
5.1, Table 1 (Oil content on oven dry de-oiled material)	-
5.1, Table 1 (Jute content, %)	-

-
-

10003

BIS, Central Laboratory (CL)

None

IS 2202 : Part 2 (2022)

WOODEN FLUSH DOOR SHUTTERS SOLID CORE TYPE SPECIFICATION PART 2 PARTICLE BOARD HIGH DENSITY FIBRE BOARD MEDIUM DENSITY FIBRE BOARD AND HARDBOARD FACE PANELS Fourth Revision

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause No -7.1 (Construction)	-
5 (SIZES AND TOLERANCES)	-
Clause No - 6.1 (Timber)	-
Clause No -6.2 (Alternative Materials (LVL)	-
Clause No -9.2 ("Workmanship and finish")	-
Clause No -10.2 (End Immersion Test)	-
Clause No -10.3 (Glue Adhesion Test)	-
Clause No -6.4 (Adhesive)	-

-
-

10004

Kailtech Test and Research Centre Pvt. Ltd., Indore

8125636

IS 14650 (2023)

UNALLOYED AND ALLOYED STEEL INGOT AND SEMI-FINISHED PRODUCTS FOR RE-ROLLING PURPOSES - SPECIFICATION (First Revision)

All

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause - 7.1(CARBON)	-	1000	-
Clause - 7.1(SULPHUR)	-	1000	-
Clause - 7.1(PHOSPHURS)	-	1000	-
Clause - 7.1(MANGANESE)	-	1000	-
Clause - 7.1(NITROGEN)	-	2000	-
Clause - 7.1(CARBON)	-	1000	-
Clause - 7.1(SULPHUR)	-	1000	-
Clause - 7.1(PHOSPHURS)	-	1000	-
Clause - 7.1(MANGANESE)	-	1000	-
Clause - 7.1(NITROGEN)	-	2000	-
Clause - 7.1(CARBON)	-	1000	-
Clause - 7.1(SULPHUR)	-	1000	-
Clause - 7.1(PHOSPHURS)	-	1000	-
Clause - 7.1(MANGANESE)	-	1000	-
Clause - 7.1(NITROGEN)	-	2000	-
As per Clause 10(Dimension)	-	1000	-
As per Clause 10.1(Dimension Width)	-	1000	-
As per Clause 10.1(Dimension Thickness)	-	1000	-
As per Clause 10.2(Dimension Length)	-	1000	-
As per Clause 11/11.1/11.2/11.3/11.4(Tolerances)	-	0	-
As per Clause 11.5(Bend)	-	1000	-
As per Clause 11.6(Camber)	-	1000	-
As per Clause 11.7 (i)(Out of Square)	-	1000	-
As per Clause 11.7 (ii)(Round Corners)	-	500	-
As per Clause 11.7 (iii)(Ridges due to gas cutting)	-	500	-
As per Clause 11.7 (iv)(Taper (Width variation on top and bottom surface at one location)	-	500	-
As per Clause 11.7 (v)(Edge slanting (Width variation on top and bottom surface at one location)	-	500	-
As per Clause 11.7 (vi)(Convexity(Difference in thickness from edge to curve)	-	500	-
As per Clause 11.7 (vii)(Chamfering (Length variation on top and bottom surface at one location)	-	500	-
As per Clause 11.7 (viii)(Wedge (Thickness variation at the edges along the cross section)	-	500	-
As per Clause 12/12.1/12.2/12.3(Freedom from defects)	-	1000	-
As per Clause 11.7 (ix)(Scarfing pits)	-	500	-
Clause. 13(Macro examination test.)	-	5000	-
Clause. 13(Macro examination test.)	-	0	-
Clause. 13(Sulphur print.)	-	8000	-
Clause. 14(Marking)	-	0	-
Clause.15(Ordering information)	-	0	-
Clause.6.0(Manufacture)	-	0	-
Clause.7.1(Silicon)	-	1000	-
Clause.7.1(Carbon Equbalant)	-	500	-
Clause.7.1(Microalloy element)	-	500	-
Clause - 7.1(CARBON)	-	1000	-
Clause - 7.1(SULPHUR)	-	1000	-
Clause - 7.1(PHOSPHURS)	-	1000	-
Clause - 7.1(MANGANESE)	-	1000	-
Clause - 7.1(NITROGEN)	-	2000	-
As per Clause 10(Dimension)	-	1000	-
As per Clause 10.1(Dimension Width)	-	1000	-
As per Clause 10.1(Dimension Thickness)	-	1000	-
As per Clause 10.2(Dimension Length)	-	1000	-
As per Clause 11/11.1/11.2/11.3/11.4(Tolerances)	-	0	-
As per Clause 11.5(Bend)	-	1000	-
As per Clause 11.6(Camber)	-	1000	-
As per Clause 11.7 (i)(Out of Square)	-	1000	-
As per Clause 11.7 (ii)(Round Corners)	-	500	-
As per Clause 11.7 (iii)(Ridges due to gas cutting)	-	500	-
As per Clause 11.7 (iv)(Taper (Width variation on top and bottom surface at one location)	-	500	-
As per Clause 11.7 (v)(Edge slanting (Width variation on top and bottom surface at one location)	-	500	-
As per Clause 11.7 (vi)(Convexity(Difference in thickness from edge to curve)	-	500	-
As per Clause 11.7 (vii)(Chamfering (Length variation on top and bottom surface at one location)	-	500	-
As per Clause 11.7 (viii)(Wedge (Thickness variation at the edges along the cross section)	-	500	-
As per Clause 12/12.1/12.2/12.3(Freedom from defects)	-	1000	-
As per Clause 11.7 (ix)(Scarfing pits)	-	500	-
Clause. 13(Macro examination test.)	-	0	-
Clause. 13(Macro examination test.)	-	5000	-
Clause. 13(Sulphur print.)	-	8000	-
Clause. 14(Marking)	-	0	-
Clause.15(Ordering information)	-	0	-
Clause.6.0(Manufacture)	-	0	-
Clause.7.1(Silicon)	-	1000	-
Clause.7.1(Carbon Equbalant)	-	1000	-
Clause.7.1(Microalloy element)	-	1000	-
Clause - 7.1(CARBON)	-	0	-
Clause - 7.1(SULPHUR)	-	0	-
Clause - 7.1(PHOSPHURS)	-	0	-
Clause - 7.1(MANGANESE)	-	0	-
Clause - 7.1(NITROGEN)	-	0	-
As per Clause 10(Dimension)	-	1000	ok
As per Clause 10.1(Dimension Width)	-	1000	ok
As per Clause 10.1(Dimension Thickness)	-	1000	ok
As per Clause 10.2(Dimension Length)	-	1000	ok
As per Clause 11/11.1/11.2/11.3/11.4(Tolerances)	-	0	-
As per Clause 11.5(Bend)	-	1000	ok
As per Clause 11.6(Camber)	-	0	-
As per Clause 11.7 (i)(Out of Square)	-	0	-
As per Clause 11.7 (ii)(Round Corners)	-	0	-
As per Clause 11.7 (iii)(Ridges due to gas cutting)	-	0	-
As per Clause 11.7 (iv)(Taper (Width variation on top and bottom surface at one location)	-	0	-
As per Clause 11.7 (v)(Edge slanting (Width variation on top and bottom surface at one location)	-	0	-
As per Clause 11.7 (vi)(Convexity(Difference in thickness from edge to curve)	-	0	-
As per Clause 11.7 (vii)(Chamfering (Length variation on top and bottom surface at one location)	-	0	-
As per Clause 11.7 (viii)(Wedge (Thickness variation at the edges along the cross section)	-	0	-
As per Clause 12/12.1/12.2/12.3(Freedom from defects)	-	0	-
As per Clause 11.7 (ix)(Scarfing pits)	-	0	-
Clause. 13(Macro examination test.)	-	0	-
Clause. 13(Macro examination test.)	-	0	-
Clause. 13(Sulphur print.)	-	0	-
Clause. 14(Marking)	-	0	-
Clause.15(Ordering information)	-	0	-
Clause.6.0(Manufacture)	-	0	-
Clause.7.1(Silicon)	-	0	-
Clause.7.1(Carbon Equbalant)	-	0	-
Clause.7.1(Microalloy element)	-	0	-

18 Dec, 2027

-
Included w.e.f. 09.11.2024 Excluding Cl.13 (Optional Test)

10005

Plastics Woven Bag Testing Lab-Technical Training & Research Centre - TTRC

9187136

IS 11652 (2017)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg cement – Specification (third revision)

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	0	-
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	200	-
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	200	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	200	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	200	-
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	200	-
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	200	-
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	0	-
4.1(Raw Material )	-	0	-
4.2 (Fabric)	-	0	-
4.2 (Linear Density, 900 denier)	-	0	-
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	0	-
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	200	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	0	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	200	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	200	-
4.3(Sacks)	-	0	-
4.4(Seam )	-	750	-
4.4(Seam )	-	0	-
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	0	-
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	0	-
4.4(Seam The stitching shall be done with double fold over seam to)	-	0	-
4.4(to a depth of minimum 25 mm, so that so that)	-	0	-
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	0	-
4.4(The number of stitches/dm shall be 14 ± 2.)	-	0	-
4.4(Seam)	-	0	-
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	0	-
4.4(Seam)	-	0	-
4.4(Seam)	-	0	-
4.4(Seam)	-	0	-
4.5(Lamination )	-	0	-
4.5(Lamination )	-	0	-
4.5(Lamination )	-	0	-
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	0	-
4.7(Valve for Filling of Sacks)	-	0	-
4.7(There shall be a double fold at the top seam and)	-	0	-
4.7(and then stitching shall be done through six layers.)	-	0	-
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	0	-
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	0	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	0	-
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	500	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	1000	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	1000	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	750	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	750	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	1000	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	0	-
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	750	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	800	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	800	-
5/5.6 (UV Resistance, )	-	8500	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	0	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	0	-
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	0	-
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	200	-
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	200	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	200	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	200	-
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	200	-
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	200	-
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	0	-
4.1(Raw Material )	-	0	-
4.2 (Fabric)	-	0	-
4.2 (Linear Density, 900 denier)	-	0	-
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	0	-
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	0	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	0	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
4.3(Sacks)	-	0	-
4.4(Seam )	-	0	-
4.4(Seam )	-	0	-
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	0	-
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	0	-
4.4(Seam The stitching shall be done with double fold over seam to)	-	0	-
4.4(to a depth of minimum 25 mm, so that so that)	-	0	-
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	0	-
4.4(The number of stitches/dm shall be 14 ± 2.)	-	0	-
4.4(Seam)	-	0	-
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	0	-
4.4(Seam)	-	0	-
4.4(Seam)	-	0	-
4.4(Seam)	-	0	-
4.5(Lamination )	-	0	-
4.5(Lamination )	-	0	-
4.5(Lamination )	-	0	-
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	0	-
4.7(Valve for Filling of Sacks)	-	0	-
4.7(There shall be a double fold at the top seam and)	-	0	-
4.7(and then stitching shall be done through six layers.)	-	0	-
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	0	-
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	0	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	200	-
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	0	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	1000	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	1000	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	1000	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	1000	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	0	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	0	-
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	750	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	800	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	800	-
5/5.6 (UV Resistance, )	-	0	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	8500	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	0	-
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	0	-
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	0	-
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	0	-
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	0	-
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	0	-
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	0	-
4.1(Raw Material )	-	0	-
4.2 (Fabric)	-	0	-
4.2 (Linear Density, 900 denier)	-	0	-
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	0	-
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	200	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	0	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
4.3(Sacks)	-	0	-
4.4(Seam )	-	0	-
4.4(Seam )	-	0	-
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	0	-
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	0	-
4.4(Seam The stitching shall be done with double fold over seam to)	-	0	-
4.4(to a depth of minimum 25 mm, so that so that)	-	0	-
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	0	-
4.4(The number of stitches/dm shall be 14 ± 2.)	-	0	-
4.4(Seam)	-	0	-
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	0	-
4.4(Seam)	-	0	-
4.4(Seam)	-	0	-
4.4(Seam)	-	0	-
4.5(Lamination )	-	0	-
4.5(Lamination )	-	0	-
4.5(Lamination )	-	0	-
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	0	-
4.7(Valve for Filling of Sacks)	-	0	-
4.7(There shall be a double fold at the top seam and)	-	0	-
4.7(and then stitching shall be done through six layers.)	-	0	-
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	0	-
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	0	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	0	-
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	0	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	1000	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	1000	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	1000	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	850	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	1000	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	1000	-
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	750	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	1000	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	1000	-
5/5.6 (UV Resistance, )	-	0	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	8500	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	0	-
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	0	-
Cl-5 Fig. 1- Table 1- Sr. no. ii(Ends per dm - Annex B 40 ± 2)	-	0	-
Cl-5 Fig. 1- Table 1-Sr. no. iii(Picks per dm-Annex B 40 ± 2)	-	0	-
Cl-5, Fig. 1- Table 1- Sr. no. i(Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm)	-	0	-
Cl-5, Fig. 1- Table 1- Sr. no. i(Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm)	-	0	-
Cl-5, Fig. 1- Table 1-Sr. no. i(Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm)	-	0	-
Cl-5, Fig. 1, Table 1(i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm)	-	0	-
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	0	-
4.1(Raw Material )	-	0	-
4.2 (Fabric)	-	0	-
4.2 (Linear Density, 900 denier)	-	0	-
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	0	-
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	0	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	0	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
4.3(Sacks)	-	0	-
4.4(Seam )	-	0	-
4.4(Seam )	-	0	-
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	0	-
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	0	-
4.4(Seam The stitching shall be done with double fold over seam to)	-	0	-
4.4(to a depth of minimum 25 mm, so that so that)	-	0	-
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	0	-
4.4(The number of stitches/dm shall be 14 ± 2.)	-	0	-
4.4(Seam)	-	0	-
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	0	-
4.4(Seam)	-	0	-
4.4(Seam)	-	0	-
4.4(Seam)	-	0	-
4.5(Lamination )	-	0	-
4.5(Lamination )	-	0	-
4.5(Lamination )	-	0	-
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	0	-
4.7(Valve for Filling of Sacks)	-	0	-
4.7(There shall be a double fold at the top seam and)	-	0	-
4.7(and then stitching shall be done through six layers.)	-	0	-
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	0	-
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	0	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	0	-
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	0	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	1000	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	1000	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	1000	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	850	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	0	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	0	-
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	750	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	800	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	800	-
5/5.6 (UV Resistance, )	-	0	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	8500	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	0	-

29 Jul, 2028

-
-

10006

CIPET: CENTRE FOR SKILLING AND TECHNICAL SUPPORT (CSTS) - CHHATRAPATI SAMBHAJINAGAR

7123534

IS 18482 (2023)

Textiles - Sandwich extrusion laminated polypropylene PP woven sacks for packaging bulk commodities - Specification

46380 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(Density)	-	700	-
5.1.2(Melt Flow Index)	-	1100	-
5.1.4(Carbon black, Density)	-	700	-
5.1.4(Carbon black, Toluene extract)	-	1100	-
5.1.4(Carbon black, Volatile matter)	-	700	-
5.1.5(UV Stabilizer)	-	2200	-
5.2.1(Visual Appearance)	-	500	-
5.2.2(Film Form)	-	0	-
5.2.4(Odour)	-	0	-
5.3.1.1(Tolerance on thickness)	-	500	-
5.3.1.2(Tolerance on width)	-	500	-
5.3.2(Impact Strength)	-	1100	-
5.3.2, Table 1(Nominal Film Thickness)	-	500	-
5.3.2, Table 1(Impact Failure Mass)	-	1100	-
5.3.3(Tensile Strength at Break)	-	1300	-
5.3.4(Elongation at Break)	-	0	-
5.3.5(Coefficient of Friction)	-	1100	-
5.3.6(Elmendorf Tear Strength)	-	1100	-
5.3.7(Opacity)	-	700	-
5.4, Table 2(Carbon black, percent)	-	925	-
5.4, Table 2(Ash content, percent)	-	1200	-
5.4, Table 2(Carbon black dispersion)	-	700	-
5.5(Service Life)	-	222580	MAXIMUM OF 5502 HORS (100 X 65 RS =6500) +( 40RS X 5402 HRS = 216080) = 216080+6500 = 222580
5.5, Annex D(U. V. Exposure (Service Life of Indian Solar Radiant Exposure 160 Kly))	-	0	MAXIMUM OF 5502 HORS (100 X 65 RS =6500) +( 40RS X 5402 HRS = 216080) = 216080+6500 = 222580
4(Sack Type)	-	500	-
5.2.1(Fabric)	-	500	-
5.2.2(Linear density of tapes)	-	700	-
5.2.4(Unlaminated fabric mass)	-	500	-
5.3.1.1.1(Mass of BOPP film in sandwich extrusion lamination)	-	500	-
5.3.1.1.2(Polypropylene coating mass for sandwich extrusion lamination of BOPP film with base PP woven fabric)	-	500	-
5.3.1.1.3(Total mass of BOPP film laminated woven fabric)	-	500	-
5.3.1.2.1(Mass of nonwoven fabric in sandwich extrusion lamination)	-	500	-
5.3.1.2.2(Polypropylene coating mass for sandwich extrusion lamination of non woven fabric with base PP woven fabric)	-	500	-
5.3.1.2.3(The total mass of nonwoven laminated woven fabric)	-	500	-
5.4.1(Sack)	-	500	-
5.4.1.1(Centre seam)	-	500	-
5.4.1.2(Bottom seam)	-	500	-
5.4.2(Sack)	-	500	-
5.4.3(Sack)	-	500	-
5.4.5(Liner)	-	500	-
6.1.1, Table 1(Inside length)	-	500	-
6.1.1, Table 1(Inside width)	-	500	-
6.1.1, Table 1(Gusset width)	-	500	-
6.1.1, Table 1(Warp per dm)	-	500	-
6.1.1, Table 1(Weft per dm)	-	500	-
6.1.1, Table 1(Mass of laminated fabric)	-	500	-
6.2, Table 1(Average breaking strength - Lengthwise)	-	1100	-
6.2, Table 1(Average breaking strength - Widthwise)	-	1100	-
6.2, Table 1(Breaking strength of bottom seam)	-	1100	-
6.2, Table 1(Breaking strength of centre seam)	-	1100	-
6.2, Table 1(Average elongation at break of fabric - Lengthwise)	-	1300	-
6.2, Table 1(Average elongation at break of fabric - Widthwise)	-	1100	-
6.3(Average breaking strength - Lengthwise after UV exposure)	-	1100	-
6.3(Average breaking strength - Widthwise after UV exposure)	-	1100	-
6.4(Drop Impact Testing of Filled Sacks)	-	1100	-
4(Sack Type)	-	500	-
5.2.1(Fabric)	-	500	-
5.2.2(Linear density of tapes)	-	500	-
5.2.4(Unlaminated fabric mass)	-	500	-
5.3.1.1.1(Mass of BOPP film in sandwich extrusion lamination)	-	500	-
5.3.1.1.2(Polypropylene coating mass for sandwich extrusion lamination of BOPP film with base PP woven fabric)	-	500	-
5.3.1.1.3(Total mass of BOPP film laminated woven fabric)	-	500	-
5.3.1.2.1(Mass of nonwoven fabric in sandwich extrusion lamination)	-	500	-
5.3.1.2.2(Polypropylene coating mass for sandwich extrusion lamination of non woven fabric with base PP woven fabric)	-	500	-
5.3.1.2.3(The total mass of nonwoven laminated woven fabric)	-	500	-
5.4.1(Sack)	-	500	-
5.4.1.1(Centre seam)	-	500	-
5.4.1.2(Bottom seam)	-	500	-
5.4.2(Sack)	-	500	-
5.4.3(Sack)	-	500	-
5.4.5(Liner)	-	500	-
6.1.1, Table 1(Inside length)	-	500	-
6.1.1, Table 1(Inside width)	-	500	-
6.1.1, Table 1(Gusset width)	-	500	-
6.1.1, Table 1(Warp per dm)	-	500	-
6.1.1, Table 1(Weft per dm)	-	500	-
6.1.1, Table 1(Mass of laminated fabric)	-	500	-
6.2, Table 1(Average breaking strength - Lengthwise)	-	1100	-
6.2, Table 1(Average breaking strength - Widthwise)	-	1100	-
6.2, Table 1(Breaking strength of bottom seam)	-	1100	-
6.2, Table 1(Breaking strength of centre seam)	-	1100	-
6.2, Table 1(Average elongation at break of fabric - Lengthwise)	-	1300	-
6.2, Table 1(Average elongation at break of fabric - Widthwise)	-	1300	-
6.3(Average breaking strength - Lengthwise after UV exposure)	-	1100	-
6.3(Average breaking strength - Widthwise after UV exposure)	-	1100	-
6.4(Drop Impact Testing of Filled Sacks)	-	1100	-
4(Sack Type)	-	0	-
5.2.1(Fabric)	-	0	-
5.2.2(Linear density of tapes)	-	0	-
5.2.4(Unlaminated fabric mass)	-	0	-
5.3.1.1.1(Mass of BOPP film in sandwich extrusion lamination)	-	0	-
5.3.1.1.2(Polypropylene coating mass for sandwich extrusion lamination of BOPP film with base PP woven fabric)	-	0	-
5.3.1.1.3(Total mass of BOPP film laminated woven fabric)	-	0	-
5.3.1.2.1(Mass of nonwoven fabric in sandwich extrusion lamination)	-	0	-
5.3.1.2.2(Polypropylene coating mass for sandwich extrusion lamination of non woven fabric with base PP woven fabric)	-	0	-
5.3.1.2.3(The total mass of nonwoven laminated woven fabric)	-	0	-
5.4.1(Sack)	-	0	-
5.4.1.1(Centre seam)	-	0	-
5.4.1.2(Bottom seam)	-	0	-
5.4.2(Sack)	-	0	-
5.4.3(Sack)	-	0	-
5.4.5(Liner)	-	0	-
6.1.1, Table 1(Inside length)	-	0	-
6.1.1, Table 1(Inside width)	-	0	-
6.1.1, Table 1(Gusset width)	-	0	-
6.1.1, Table 1(Warp per dm)	-	0	-
6.1.1, Table 1(Weft per dm)	-	0	-
6.1.1, Table 1(Mass of laminated fabric)	-	0	-
6.2, Table 1(Average breaking strength - Lengthwise)	-	0	-
6.2, Table 1(Average breaking strength - Widthwise)	-	0	-
6.2, Table 1(Breaking strength of bottom seam)	-	0	-
6.2, Table 1(Breaking strength of centre seam)	-	0	-
6.2, Table 1(Average elongation at break of fabric - Lengthwise)	-	0	-
6.2, Table 1(Average elongation at break of fabric - Widthwise)	-	0	-
6.3(Average breaking strength - Lengthwise after UV exposure)	-	0	-
6.3(Average breaking strength - Widthwise after UV exposure)	-	0	-
6.4(Drop Impact Testing of Filled Sacks)	-	0	-
Clause 5.4.5.3("Free from pin holes (except for air removal perforations), patches, tears, blisters, and any other visible defects")	-	0	-
Clause 6.2.2(Stitch strength)	-	0	-
Clause 6.2.2(Weld seam strength)	-	0	-
Clause 5.4.5.3("Free from pin holes (except for air removal perforations), patches, tears, blisters, and any other visible defects")	-	0	-
Clause 6.2.2(Stitch strength)	-	0	-
Clause 6.2.2(Weld seam strength)	-	0	-
Clause 6.5 Table 1 viii(Ash content)	-	0	-

31 Dec, 2026

-
Included w.e.f. 24.04.2024

10007

Stellar Test House, Noida

8171606

IS 15658 (2021)

Concrete Paving Blocks - Specification ( First Revision )

M-30,M-35,M-40,M-50,M-55

21300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 7.2, Table No. 2, SI No. (ii) (Indivdual Length, L)	-	500	-
Clause 7.2, Table No. 2, SI No. (ii) (Length, L)	-	100	-
Clause 7.2, Table No. 2, SI No. (i) (Indivdual Width, W)	-	500	-
Clause 7.2, Table No. 2, SI No. (i) (Width, W)	-	100	-
Clause 7.2, Table No. 2, SI No. (iii) (Indivdual Thickness, Th)	-	500	-
Clause 7.2, Table No. 2, SI No. (iii) (Thickness, Th)	-	100	-
Clause 7.2, Table No. 2, SI No. (iv) (Indivdual Aspect Ratio, L/Th)	-	500	-
Clause 7.2, Table No. 2, SI No. (iv) (Aspect Ratio, L/Th)	-	100	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Depth)	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Depth)	-	100	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Width)	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Width)	-	100	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Indivdual Plan Area (Asp))	-	300	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Plan Area (Asp))	-	100	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Indivdual Thickness of wearing Layer)	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Thickness of wearing Layer)	-	100	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Indivdual Ratio of wearing face area and Plan area (Asw/Asp))	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Ratio of wearing face area and Plan area (Asw/Asp))	-	100	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) a)( Indivdual Water absorption)	-	600	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) b)(Water absorption (Average of three test specimens))	-	1800	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) a)(Indivdual Compressive strength (i))	-	1800	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Compressive strength (Average of eight test specimens))	-	100	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) a)(Indivdual Flexural strength (i))	-	1500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) b)(Average Flexural strength )	-	100	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) a)(Indivdual Tensile splitting strength (i))	-	1500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) b)(Average Tensile splitting strength )	-	100	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) i)( Indivdual Dry Abrasion Resistance )	-	3500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) ii)(Dry Abrasion resistance (Average of three test specimens))	-	500	-
Clause 7.3, Annex G(Individual Breaking Load)	-	500	-
Clause 7.3, Annex G(Average Breaking Load)	-	100	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) ii)(Wet Abrasion resistance (Average of three test specimens))	-	3500	-

26 Sep, 2028

-
Excluding freeze thaw durability

10008

Stellar Test House, Noida

8171606

IS 269 (2015)

Ordinary portland cement - Specification (Sixth Revision)

33,43,43-S, 53 and 53-S

14480 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1 Table-2 vi(Loss on ignition)	-	400	20% Discount to BIS
6.1 Table-2 iii.(Insoluble residue)	-	800	20% Discount to BIS
6.1 Table-2 viii(Alkali content)	-	1200	20% Discount to BIS
6.1 Table-2 vii(Chloride content)	-	1200	20% Discount to BIS
6 - Table - 1 v(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	800	20% Discount to BIS
6.1 Table-2 iv(Magnesia)	-	800	20% Discount to BIS
6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-	2400	20% Discount to BIS
6 - Table - 1 ii(Ratio of percentage of alumina to that of iron oxide - Cl 4 of IS 4032:1985)	-	800	20% Discount to BIS
7 Table-3 i.(Fineness)	-	800	20% Discount to BIS
7 Table-3 ii a(Expansion by Le Chatelier)	-	640	20% Discount to BIS
7 Table-3 ii b(Expansion by Autoclave)	-	960	20% Discount to BIS
7 Table-3 iii a(Setting Time Initial)	-	640	20% Discount to BIS
7 Table-3 iii b(Setting Time Final)	-	640	20% Discount to BIS
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	800	20% Discount to BIS
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	800	20% Discount to BIS
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	800	20% Discount to BIS

26 Sep, 2028

-
-

10009

HEXIQON LABORATORY PRIVATE LIMITED, AHMEDABAD

7167306

IS 2556 : Part 6 (2021)

Vitreous China sanitary appliances - Specification: Part 6 Specific requirements of urinal and partition plates (fifth revision)

Any Patterns and Sizes

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4(GENERAL REQUIREMENTS)	-	2500	-
Cl 5(PATTERNS AND SIZES)	-	200	-
Cl 6.1(DIMENSIONS AND TOLERANCES)	-	2000	-
Cl 6.2(DIMENSIONS AND TOLERANCES)	-	2000	-
Cl 6.3(DIMENSIONS AND TOLERANCES)	-	2000	-
Cl 7(CONSTRUCTION)	-	200	-
Cl 7.1(Wall-hung urinal (flat back) with flushing rim (see Fig. 1) and wall-hung urinal (angle back) with flushing rim (see Fig. 3) shall have an integral flushing box rim with minimum 12 holes, well distributed in the rim to ensure satisfactory flushing. It shall have an integral outlet and overflow.)	-	200	-
Cl 7.1.2()	-	200	-
Cl 7.2()	-	200	-
Cl 7.3()	-	200	-
Cl 7.4()	-	200	-
Cl 7.5()	-	200	-
Cl 7.6()	-	200	-
Cl 7.7()	-	200	-
Cl 7.8()	-	200	-
Cl 8()	-	200	-
Cl 4(GENERAL REQUIREMENTS)	-	2500	-
Cl 5(PATTERNS AND SIZES)	-	200	-
Cl 6.1(DIMENSIONS AND TOLERANCES)	-	2000	-
Cl 6.2(DIMENSIONS AND TOLERANCES)	-	2000	-
Cl 6.3(DIMENSIONS AND TOLERANCES)	-	2000	-
Cl 7(CONSTRUCTION)	-	200	-
Cl 7.1(Wall-hung urinal (flat back) with flushing rim (see Fig. 1) and wall-hung urinal (angle back) with flushing rim (see Fig. 3) shall have an integral flushing box rim with minimum 12 holes, well distributed in the rim to ensure satisfactory flushing. It shall have an integral outlet and overflow.)	-	200	-
Cl 7.1.2()	-	200	-
Cl 7.2()	-	200	-
Cl 7.3()	-	200	-
Cl 7.4()	-	200	-
Cl 7.5()	-	200	-
Cl 7.6()	-	200	-
Cl 7.7()	-	200	-
Cl 7.8()	-	200	-
Cl 8()	-	200	-
Clause 4 and Clause 9.3 of IS 2556 (Part 1)(Water absorption)	-	1500	-
Clause 4 and Clause 5.2 of IS 2556 (Part 1)(Lead solubility test)	-	800	-
Clause 4 and Clause 7 of IS 2556 (Part 1)(Minimum thickness)	-	100	-
Clause 4and Clause 9.1 of IS 2556 (Part 1)(Warpage)	-	100	-
Clause 4and Clause 9.2 of IS 2556 (Part 1)(Crazing)	-	1200	-
Clause 4 and Clause 9.4 of IS 2556 (Part 1)(Modulus of Rupture)	-	1500	-
Clause 4 and Clause 9.5 of IS 2556 (Part 1)(Chemical resistance)	-	1500	-
Clause 4 and Clause 9.6 of IS 2556 (Part 1)(Resistance to staining and burning)	-	1000	-
Clause 4 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)(General-Wavy finish)	-	200	-
Clause 4 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)(General-Warpage)	-	100	-
Clause 4 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)(General- Other appliances)	-	200	-
Clause 4 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)(General- Accessories)	-	200	-
Clause 4 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)(General- Bit)	-	200	-
Clause 4 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)(General- Discoloration)	-	200	-
Clause 4 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)("Flushing surface and horizontal face of rims of WC pans, squatting pans, bidets and urinals- Spots, blisters and pinholes")	-	200	-
Clause 4 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)("Flushing surface and horizontal face of rims of WC pans, squatting pans, bidets and urinals-Bubbles and specks")	-	200	-
Clause 4 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)("Flushing surface and horizontal face of rims of WC pans, squatting pans, bidets and urinals-Polishing marks")	-	200	-
Clause 4 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)("Visible surfaces other than above-Spots, blisters and pinholes ")	-	200	-
Clause 4 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)("Visible surfaces other than above-Bubbles and specks")	-	200	-
Clause 4 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)("Visible surfaces other than above-Polishing marks")	-	200	-
Clause 4 and Clause 5 of of IS 2556 (Part 1)(Application of glazing)	-	200	-
Clause 4 and Clause 6.4 of IS 2556 (Part 1)(Illumination during visual observation)	-	200	-

-
Included w.e.f. 10.04.2024

10010

HEXIQON LABORATORY PRIVATE LIMITED, AHMEDABAD

7167306

IS 15477 (2019)

Adhesives for use with ceramic tiles and mosaics

Type 1, Type 2, Type 3, Type 4, Type 5 adhesives

19000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Classification)	-	200	-
5.1(Tensile Adhesion Strength )	-	3500	-
5.1(Tensile Adhesion Strength)	-	3500	-
5.2(Shear Adhesion Strength )	-	3500	-
5.2(Shear Adhesion Strength)	-	3500	-
5.2(Shear Adhesion Strength)	-	3500	-
5.3(OpenTime)	-	1500	-
5.4(Adjustment Time)	-	1500	-
5.5(Slip (Required for Vertical Application Only))	-	1500	-
5.6(Deformability (Required for VerticalApplication Only))	-	3500	-
8.2(Marking)	-	200	-

-
Included w.e.f. 10.04.2024

10011

SGS India Pvt Ltd, Gurgaon (8136216)

8136216

IS 15644 (2006)

Safety of electric toys

All Type of Electrical Toys

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.0(Marking and instructions)	-	3000	For Single test
8.0(Power Input)	-	3000	For Single test
9.0(Heating and abnormal operation)	-	3000	For Single test
10.0(Electrical strength at operating temperature)	-	3000	For Single test
11.1(Moisture resistance)	-	3000	For Single test
11.2(Resistant to humidity)	-	3000	For Single test
12.0(Electric strength at room temperature)	-	3000	For Single test
13.0(Mechanical strength)	-	3000	For Single test
14.1(Construction)	-	3000	For Single test
14.2(Construction)	-	3000	For Single test
14.3(Construction)	-	3000	For Single test
14.4(Construction)	-	3000	For Single test
14.5(Construction)	-	3000	For Single test
14.6(Construction)	-	3000	For Single test
14.7(Construction)	-	3000	For Single test
14.8(Construction)	-	3000	For Single test
14.9(Construction)	-	3000	For Single test
14.1(Construction)	-	3000	For Single test
14.11(Construction)	-	3000	For Single test
14.12(Construction)	-	3000	For Single test
5.15(General Conditions)	-	3000	for single test
15.2(Protection of cords and wires)	-	3000	for single test
16.0(Components)	-	3000	for single test
17 Table-1(Screws and connections)	-	3000	for single test
17 Table-1(Nominal daimeter of screws made of insulating material)	-	3000	for single test
18.0(Clearance and creepage distance)	-	3000	for single test
19.1(Ball pressure test IEC 60695-10-2)	-	3000	for single test
19.2.1(Glow wire test IEC 60695-2-11)	-	3000	for single test
19.2.2(Needle flame test)	-	3000	for single test
15.1(Protection of cords and wires)	-	3000	for single test

31 Dec, 2026

-
Excluding Radiation, toxicity & similar hazards (Cl.20)

10012

SGS India Pvt Ltd, Gurgaon (8136216)

8136216

IS 9873 : Part 2 (2017)

Safety of toys: Part 2 flammability (Third Revision)

1500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.2-5.2(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy-Duration of the flame after the removal of the test flame)	-	1500	For the single clause.
4.2.2(a)-5.2(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was 150 mm or more)	-	1500	For the single clause.
4.2.2(b)-5.2(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was less than 150 mm)	-	1500	For the single clause.
4.2.3-5.3(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy-Duration of the flame after the removal of the test flame)	-	1500	For the single clause.
4.2.3-5.3(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy- maximum distance between the upper edge of the burnt area and the point of application of the test flame)	-	1500	For the single clause.
4.2.4-5.3(Toys to be worn on the head-Full or partial moulded head masks-Duration of the flame after the removal of the test flame)	-	1500	For the single clause.
4.2.4-5.3(Toys to be worn on the head-Full or partial moulded head masks-maximum distance between the upper edge of the burnt area and the point of application of the test flame)	-	1500	For the single clause.
4.2.5-5.4(Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-rate of spread of flame)	-	1500	For the single clause.
4.2.5-5.4(Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	1500	For the single clause.
4.3-5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-rate of spread of flame)	-	1500	For the single clause.
4.3-5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	1500	For the single clause.
4.3(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play)	-	1500	For the single clause.
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame)	-	1500	For the single clause.
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	1500	For the single clause.
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	1500	For the single clause.
4.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	1500	For the single clause.
4.5-5.5(Soft-filled toys-rate of spread of flame )	-	1500	For the single clause.
4.5-5.5(Soft-filled toys-Test for soft-filled toys )	-	1500	For the single clause.

31 Dec, 2026

-
-

10013

SGS India Pvt Ltd, Gurgaon (8136216)

8136216

IS 9873 : Part 1 (2019)

Safety of toys: Part 1 safety aspects related to mechanical and physical properties (Fourth Revision)

All Type

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2 - 5.24.2( Reasonably foreseeable abuse -Drop Test)	-	1000	for single clause.
4.2 - 5.24.3( Reasonably foreseeable abuse -Tip-over test for large and bulky toys)	-	1000	for single clause.
4.2 - 5.24.4( Reasonably foreseeable abuse -Dynamic strength test for wheeled ride-on toys other than toy scooters)	-	1000	for single clause.
4.2 - 5.24.5( Reasonably foreseeable abuse -Torque test)	-	1000	for single clause.
4.2 - 5.24.6.2( Reasonably foreseeable abuse -Tension test for seams in soft-filled (stuffed) toys. beanbag-type toys, and other similar filled toys)	-	1000	for single clause.
4.2 - 5.24.6.3( Reasonably foreseeable abuse -Tension test for pompoms)	-	1000	for single clause.
4.2 - 5.24.6.4( Reasonably foreseeable abuse -Tension test for protective components)	-	1000	for single clause.
4.2 - 5.24.6.5( Reasonably foreseeable abuse -Tension test for a projectile with a suction cup)	-	1000	for single clause.
4.2 - 5.24.7( Reasonably foreseeable abuse -Compression test)	-	1000	for single clause.
4.2 - 5.24.8.2( Reasonably foreseeable abuse-Flexure test-Wires and other metallic components intended to be bent)	-	1000	for single clause.
4.2 - 5.24.8.3( Reasonably foreseeable abuse -Flexure test-Wires likely to be bent)	-	1000	for single clause.
4.3.2 - 5.21( Expanding materials)	-	1000	for single clause.
4.4.1 - 5.2(Small parts-For children under 36 months)	-	1000	for single clause.
4.4.2 - 5.2(Small parts-For children 36 months and over but under 72 months )	-	1000	for single clause.
4.5.1.2 - 5.3(Shape, size and strength of certain toys-Squeeze toys, rattles, and certain other toys and components of toys-Test for shape and size of certain toys)	-	1000	for single clause.
4.5.1.3 - 5.3(Shape, size and strength of certain toys-Other toys or components of toys with nearly spherical, hemispherical, circular flared, or dome-shaped ends of toys having a mass less than 0,5 kg and intended for children under 18 months-Test for shape and size of certain toys)	-	1000	for single clause.
4.5.1.4 - 5.3(Shape, size and strength of certain toys-Toy fasteners (e.g. nails, bolts, screws, and pegs) with nearly spherical, hemispherical, or dome-shaped ends intended for children 18 months and over but under 48 months-Test for shape and size of certain toys)	-	1000	for single clause.
4.5.2 - 5.4(Shape, size and strength of certain toys-Small balls-Small balls test)	-	1000	for single clause.
4.5.3 - 5.5(Shape, size and strength of certain toys-Pompoms-Test for pompoms)	-	1000	for single clause.
4.5.4 - 5.6(Shape, size and strength of certain toys- Pre-school play figures-Test for pre-school play figures)	-	1000	for single clause.
4.5.5(Shape, size and strength of certain toys-Toy pacifiers-Nipple length)	-	1000	for single clause.
4.5.6(Shape, size and strength of certain toys-Balloons)	-	1000	for single clause.
4.5.7(Shape, size and strength of certain toys-Marbles)	-	1000	for single clause.
4.5.8 - a(Shape, size and strength of certain toys-Hemispheric-shaped toys-No of Opening)	-	1000	for single clause.
4.5.8 - a(Shape, size and strength of certain toys-Hemispheric-shaped toys-Position of opening in Base)	-	1000	for single clause.
4.5.8 - a(Shape, size and strength of certain toys-Hemispheric-shaped toys-Position of opening not in Base)	-	1000	for single clause.
4.5.8 - b(Shape, size and strength of certain toys-Hemispheric-shaped toys-Extension of divider)	-	1000	for single clause.
4.5.8 - c(Shape, size and strength of certain toys-Hemispheric-shaped toys-No of Opening)	-	1000	for single clause.
4.5.8 - c(Shape, size and strength of certain toys-Hemispheric-shaped toys-Position of opening )	-	1000	for single clause.
4.5.8 - c(Shape, size and strength of certain toys-Hemispheric-shaped toys-Position of opening )	-	1000	for single clause.
4.5.8 - d(Shape, size and strength of certain toys-Hemispheric-shaped toys)	-	1000	for single clause.
4.5.8 - d(Shape, size and strength of certain toys-Hemispheric-shaped toys-The maximum distance between centrelines of adjacent peaks )	-	1000	for single clause.
4.5.8 - d(Shape, size and strength of certain toys-Hemispheric-shaped toys-Minimum depth)	-	1000	for single clause.
4.6.1 a - 5.8(Edges-Accessible sharp edges of glass or metal-Sharp edge test)	-	1000	for single clause.
4.6.1 b(Edges-Accessible sharp edges of glass or metal- gap between the edge and the adjacent surface)	-	1000	for single clause.
4.6.2(Edges-Functional sharp edges)	-	1000	for single clause.
4.6.3 - 5.8(Edges-Edges on metal toys-Sharp edge test)	-	1000	for single clause.
4.6.4( Edges-Edges on moulded toys)	-	1000	for single clause.
4.6.5( Edges-Edges on exposed bolts or threaded rod)	-	1000	for single clause.
4.7.1 - 5.9(Points-Accessible sharp points-sharp-point test)	-	1000	for single clause.
4.7.2 - a(Points-Functional sharp points)	-	1000	for single clause.
4.7.2 - b(Points-Functional sharp points)	-	1000	for single clause.
4.7.3 (Wooden toys)	-	1000	for single clause.
4.8.1(Projections-General requirments)	-	1000	for single clause.
4.9(a) - 5.24.8.2( Metal wires and rods-wires and other metallic components intended to be bent)	-	1000	for single clause.
4.9(b) - 5.24.8.3( Metal wires and rods-wires likely to be bent)	-	1000	for single clause.
4.9 - c( Metal wires and rods)	-	1000	for single clause.
4.9 - c - 5.8( Metal wires and rods-Sharp edge test)	-	1000	for single clause.
4.9 - c - 5.9( Metal wires and rods-Sharp Point test)	-	1000	for single clause.
4.9 - c( Metal wires and rods-Minimum dia of spokes)	-	1000	for single clause.
4.9 - c( Metal wires and rods-Spokes ends)	-	1000	for single clause.
4.10(a) - 5.10(Plastic film or plastic bags in packaging and in toys-average thickness)	-	1000	for single clause.
4.10(a) - 5.10(Plastic film or plastic bags in packaging and in toys- individual thickness)	-	1000	for single clause.
4.10(a) - 5.10(Plastic film or plastic bags in packaging and in toys- individual thickness)	-	1000	for single clause.
4.11.2.1(a) - 5.11.2( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-Length of cords and electrical cables)	-	1000	for single clause.
4.11.2.1(b) - 5.11.3( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-breakaway feature separation test)	-	1000	for single clause.
4.11.2.1(b) - 5.11.2( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-Length of cords and electrical cables after breakaway feature separation test)	-	1000	for single clause.
4.11.2.2 - 5.11.2( Cords-Cords in toys intended for children under 18 months--Other cords-free length )	-	1000	for single clause.
4.11.3.1(a) - 5.11.2( Cords-Cords in toys intended for children 18 months and over but under 36 months-Cords with the potential to tangle-Length of cords and electrical cables)	-	1000	for single clause.
4.11.3.1(b) - 5.11.3( Cords-Cords in toys intended for children 18 months and over but under 36 months-Cords with the potential to tangle-breakaway feature separation test)	-	1000	for single clause.
4.11.3.1(b) - 5.11.2( Cords-Cords in toys intended for children 18 months and over but under 36 months-Cords with the potential to tangle-Length of cords and electrical cables after breakaway feature separation test)	-	1000	for single clause.
4.11.3.2( Cords-Cords in toys intended for children 18 months and over but under 36 months-Other cords)	-	1000	for single clause.
4.11.3.3 ( Cords-Cords in toys intended for children 18 months and over but under 36 months-Other cords without a free end )	-	1000	for single clause.
4.11.4(a) - 5.11.4.1(Cords-Fixed loops and nooses intended for children under 36 months-Test for fixed loops and nooses-Head probe push test)	-	1000	for single clause.
4.11.4(a) - 5.11.4.2(Cords-Fixed loops and nooses intended for children under 36 months-Test for fixed loops and nooses-Elastic materials)	-	1000	for single clause.
4.11.4(b) - 5.11.3(Cords-Fixed loops and nooses intended for children under 36 months-Breakaway feature separation test)	-	1000	for single clause.
4.11.5 - 5.11.2(Cords-Cords on pull toys-free length)	-	1000	for single clause.
4.11.6(Cords- Electrical cables)	-	1000	for single clause.
4.11.7 - 5.11.1(Cords- Diameter of certain cords intended for children under 36 months-cords cross-sectional dimension)	-	1000	for single clause.
4.11.8 - 5.11.5(Cords- Self-retracting cords intended for children under 36 months-self-retracting cords)	-	1000	for single clause.
4.11.9.1(Cords-Toys intended to be strung across a cradle, cot, perambulator or carriage)	-	1000	for single clause.
4.11.9.2 (Cords-Toys otherwise intended to be attached to a cradle, cot, perambulator or carriage)	-	1000	for single clause.
4.11.9.2 (Cords-Toys otherwise intended to be attached to a cradle, cot, perambulator or carriage)	-	1000	for single clause.
4.11.10(Cords-Cords on toy bags)	-	1000	for single clause.
4.11.11 - 5.11.6( Cords, strings and lines for flying toys- electrical resistance)	-	1000	for single clause.
4.11.11( Cords, strings and lines for flying toys- )	-	1000	for single clause.
4.12.1(a - 1)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	1000	for single clause.
4.12.1(a - 2)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	1000	for single clause.
4.12.1(a - 3) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys-toy pushchairs and perambulators)	-	1000	for single clause.
4.12.1(a - 4)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	1000	for single clause.
4.12.1(a - 5) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	1000	for single clause.
4.12.1(b - 1)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	1000	for single clause.
4.12.1(b - 2) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	1000	for single clause.
4.12.1(b - 3) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	1000	for single clause.
4.12.2 (a) - 5.22.3(Folding mechanisms-Other toys with folding mechanisms)	-	1000	for single clause.
4.12.2 (b)(Folding mechanisms-Other toys with folding mechanisms)	-	1000	for single clause.
4.12.3(Folding mechanisms-Hinge line clearance)	-	1000	for single clause.
4.13.1(Holes, clearances and accessibility of mechanisms-Circular holes in rigid materials)	-	1000	for single clause.
4.13.2 (Holes, clearances and accessibility of mechanisms-Accessible clearances for movable segments)	-	1000	for single clause.
4.13.3(Holes, clearances and accessibility of mechanisms- Chains or belts in ride-on toys)	-	1000	for single clause.
4.13.3 - 5.7(Holes, clearances and accessibility of mechanisms- Chains or belts in ride-on toys-accessibility of a part or component)	-	1000	for single clause.
4.13.3(Holes, clearances and accessibility of mechanisms- Chains or belts in ride-on toys)	-	1000	for single clause.
4.13.4(Holes, clearances and accessibility of mechanisms-Other driving mechanisms)	-	1000	for single clause.
4.13.5(Holes, clearances and accessibility of mechanisms-Winding keys)	-	1000	for single clause.
4.14(a)(Springs)	-	1000	for single clause.
4.14(b)(Springs)	-	1000	for single clause.
4.14(c)(Springs)	-	1000	for single clause.
4.15.1.1 - 5.12.2( Stability and overload requirements-Stability of ride-on toys and seats-Sideways stability, feet available for stabilization)	-	1000	for single clause.
4.15.1.2 - 5.12.3( Stability and overload requirements-Stability of ride-on toys and seats-Sideways stability, feet unavailable for stabilization)	-	1000	for single clause.
4.15.1.3 - 5.12.4( Stability and overload requirements-Stability of ride-on toys and seats-Fore and aft stability Test)	-	1000	for single clause.
4.15.2 - 5.12.5( Stability and overload requirements-Overload requirements for ride-on toys and seats-overload test for ride-on toys and seats)	-	1000	for single clause.
4.15.2 - 5.24.4( Stability and overload requirements-Overload requirements for ride-on toys and seats-dynamic strength test for wheeled ride-on toys other than toy scooters)	-	1000	for single clause.
4.15.3 - 5.12.6( Stability and overload requirements-Stability of stationary floor toy-Stability test of stationary floor toys)	-	1000	for single clause.
4.16.1(Enclosures-Ventilation)	-	1000	for single clause.
4.16.1(Enclosures-Ventilation-No of openings)	-	1000	for single clause.
4.16.1(Enclosures-Ventilation-Area of Each openings(If two openings))	-	1000	for single clause.
4.16.1(Enclosures-Ventilation-Distance between openings(If two openings))	-	1000	for single clause.
4.16.1(Enclosures-Ventilation-Area of Each openings(If One opening))	-	1000	for single clause.
4.16.1(Enclosures-Ventilation-spacing(If One opening))	-	1000	for single clause.
4.16.1(Enclosures-Ventilation)	-	1000	for single clause.
4.16.1(Enclosures-Ventilation)	-	1000	for single clause.
4.16.2.1(Enclosures-Closures-Lids, doors and similar devices)	-	1000	for single clause.
4.16.2.1 - 5.13.1(Enclosures-Closures-Lids, doors and similar devices-Test For closures)	-	1000	for single clause.
4.16.2.2(a)(Enclosures-Closures-Lid support for toy chests and similar toys)	-	1000	for single clause.
4.16.2.2(a) - 5.13.2.1(Enclosures-Closures-Lid support for toy chests and similar toys-Test For lid support)	-	1000	for single clause.
4.16.2.2(a) - 5.13.2.2(Enclosures-Closures-Lid support for toy chests and similar toys- After durability test for toy chest lids)	-	1000	for single clause.
4.16.2.2(a) - 5.13.2.2(Enclosures-Closures-Lid support for toy chests and similar toys-Test For lid support After durability test for toy chest lids)	-	1000	for single clause.
4.16.2.2(b) - 5.13.2.2(Enclosures-Closures-Lid support for toy chests and similar toys-durability test for toy chest lids)	-	1000	for single clause.
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 1)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	1000	for single clause.
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 2)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	1000	for single clause.
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 3) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys-toy pushchairs and perambulators)	-	1000	for single clause.
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 4)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	1000	for single clause.
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 5) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	1000	for single clause.
4.16.2.2(c) - 5.13.2.2 - 4.12.1(b - 1)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	1000	for single clause.
4.16.2.2(c) - 5.13.2.2 - 4.12.1(b - 2) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	1000	for single clause.
4.16.2.2(c) - 5.13.2.2 - 4.12.1(b - 3) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	1000	for single clause.
4.16.2.2(c) - 5.13.2.2 - 4.12.2 (a) - 5.22.3(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Other toys with folding mechanisms)	-	1000	for single clause.
4.16.2.2(c) - 5.13.2.2 - 4.12.2 (b)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Other toys with folding mechanisms)	-	1000	for single clause.
4.16.2.2(c) - 5.13.2.2 - 4.12.3(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Hinge line clearance)	-	1000	for single clause.
4.16.2.2(d)(Enclosures-Closures-Lid support for toy chests and similar toys)	-	1000	for single clause.
4.16.3(Enclosures-Toys that enclose the head)	-	1000	for single clause.
4.16.3(Enclosures-Toys that enclose the head-No of openings)	-	1000	for single clause.
4.16.3(Enclosures-Toys that enclose the head-Area of Each openings(If two openings))	-	1000	for single clause.
4.16.3(Enclosures-Toys that enclose the head-Distance between openings(If two openings))	-	1000	for single clause.
4.16.3(Enclosures-Toys that enclose the head-Area of Each openings(If One opening))	-	1000	for single clause.
4.17 - 5.14(Simulated protective equipment, such as helmets, hats and goggles-Impact test for toys that cover the face)	-	1000	for single clause.
4.17(Simulated protective equipment, such as helmets, hats and goggles)	-	1000	for single clause.
4.18.2(a) - 5.36(Projectile toys-Projectiles-tip assessment of rigid projectiles)	-	1000	for single clause.
4.18.2(b)(Projectile toys-Projectiles)	-	1000	for single clause.
4.18.2(c)(Projectile toys-Projectiles)	-	1000	for single clause.
4.18.2(c)(Projectile toys-Projectiles-Radius)	-	1000	for single clause.
4.18.2(d) - 5.37(Projectile toys-Projectiles-length of suction cup projectiles)	-	1000	for single clause.
4.18.2(d) - 5.37 - 5.24.5(Projectile toys-Projectiles-length of suction cup projectiles After torque test)	-	1000	for single clause.
4.18.2(d) - 5.37 - 5.24.6.5(Projectile toys-Projectiles-length of suction cup projectiles After tension test for a projectile with a suction cup)	-	1000	for single clause.
4.18.2 - e - 5.24.5(Projectile toys-Projectiles-torque test)	-	1000	for single clause.
4.18.2 - e - 5.24.6.5(Projectile toys-Projectiles-tension test for a projectile with a suction cup)	-	1000	for single clause.
4.18.3(a) - 5.2(Projectile toys-Projectile toys with stored energy-small parts test)	-	1000	for single clause.
4.18.3(a) - 5.3 - 5.24(Projectile toys-Projectile toys with stored energy-small parts test after reasonably foreseeable abuse testing)	-	1000	for single clause.
4.18.3(a) - 5.4(Projectile toys-Projectile toys with stored energy--small parts test after (wall impact test for projectiles)	-	1000	for single clause.
4.18.3(b)(Projectile toys-Projectile toys with stored energy)	-	1000	for single clause.
4.18.3(b)(Projectile toys-Projectile toys with stored energy)	-	1000	for single clause.
4.18.3(b) - 5.15.1.3.3(Projectile toys-Projectile toys with stored energy-determination of kinetic energy per area of contact)	-	1000	for single clause.
4.18.3(c ) - 5.24.5(Projectile toys-Projectile toys with stored energy-torque test)	-	1000	for single clause.
4.18.3(c ) - 5.24.6.4(Projectile toys-Projectile toys with stored energy- tension test for protective components)	-	1000	for single clause.
4.18.3(c )(Projectile toys-Projectile toys with stored energy)	-	1000	for single clause.
4.18.3(d) - 5.15.2(Projectile toys-Projectile toys with stored energy-Wall impact test for projectiles)	-	1000	for single clause.
4.18.3(e )(Projectile toys-Projectile toys with stored energystored energy-Discharge mechanism)	-	1000	for single clause.
4.18.4.1 - 5.20(Projectile toys-Projectile toys without stored energy-Mouth-actuated projectile toys-durability of mouth-actuated toys)	-	1000	for single clause.
4.18.4.2(a) - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-determination of the kinetic energy per area of contact when the contact area of the dart shall be at least 3 cm^2)	-	1000	for single clause.
4.18.4.2(b)(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart)	-	1000	for single clause.
4.18.4.2(b)(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart)	-	1000	for single clause.
4.18.4.2(b)(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart)	-	1000	for single clause.
4.18.4.2(c ) - 5.24.5(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After torque test)	-	1000	for single clause.
4.18.4.2(c ) - 5.24.5(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After torque test)	-	1000	for single clause.
4.18.4.2(c ) - 5.24.5(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-Contact area After torque test)	-	1000	for single clause.
4.18.4.2(c ) - 5.24.6.4(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After tension test for protective components)	-	1000	for single clause.
4.18.4.2(c ) - 5.24.6.4(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After tension test for protective components)	-	1000	for single clause.
4.18.4.2(c ) - 5.24.6.4(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-Contact area After tension test for protective components)	-	1000	for single clause.
4.18.4.3 - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)-kinetic energy per area)	-	1000	for single clause.
4.18.4.3 - 5.15.2(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)-wall impact test for projectiles)	-	1000	for single clause.
4.18.4.3(a)(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)	-	1000	for single clause.
4.18.4.3(b)(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)	-	1000	for single clause.
4.18.4.3(c)(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)	-	1000	for single clause.
4.18.4.6 - 5.24.5(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set-After torque test)	-	1000	for single clause.
4.18.4.6 - 5.24.6.4 - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set-kinetic energy per area After tension test for protective components)	-	1000	for single clause.
4.19(Rotors and propellers)	-	1000	for single clause.
4.2(Aquatic toys)	-	1000	for single clause.
4.2(Aquatic toys)	-	1000	for single clause.
4.2(Aquatic toys)	-	1000	for single clause.
4.2(Aquatic toys)	-	1000	for single clause.
4.21(a)(Braking)	-	1000	for single clause.
4.21(a)(Braking-brake performance for mechanically or electrically powered ride-on toys other than toy bicycles)	-	1000	for single clause.
4.21(a)(braking)	-	1000	for single clause.
4.21(b)(braking)	-	1000	for single clause.
4.22.1(Toy bicycles-Instructions for use)	-	1000	for single clause.
4.22.2(Toy bicycles-Determination of maximum saddle height)	-	1000	for single clause.
4.22.2(Toy bicycles-Determination of maximum saddle height)	-	1000	for single clause.
4.22.3 - 5.16.1(Toy bicycles-Braking requirements-determination of free-wheeling facility)	-	1000	for single clause.
4.22.3 (Toy bicycles-Braking requirements- brake lever dimension(d))	-	1000	for single clause.
4.22.3 (Toy bicycles-Braking requirements- lever Length(l))	-	1000	for single clause.
4.22.3 - 5.16.3(Toy bicycles-Braking requirements- brake performance for toy bicycles)	-	1000	for single clause.
4.23 - 5.17(Speed limitation of electrically driven ride-on toys-determination of speed of electrically driven ride-on toys)	-	1000	for single clause.
4.24(a) - 5.18(Toys containing a heat source-determination of temperature increases)	-	1000	for single clause.
4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand-(Parts made of metals))	-	1000	for single clause.
4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand(Parts made of glass or porcelain))	-	1000	for single clause.
4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand(Parts made of Plastic or wood ))	-	1000	for single clause.
4.24(c) - 5.18(Toys containing a heat source- rise in temperature of other accessible parts of the toy(Parts made of metals))	-	1000	for single clause.
4.24(c) - 5.18(Toys containing a heat source- rise in temperature of other accessible parts of the toy( Parts made of other materials))	-	1000	for single clause.
4.25 - 5.19(Liquid-filled toys-leakage of liquid-filled toys)	-	1000	for single clause.
4.25(Liquid-filled toys)	-	1000	for single clause.
4.26(a) - 5.2( Mouth-actuated toys-small parts test)	-	1000	for single clause.
4.26(b) - 5.24.5 - 5.3( Mouth-actuated toys-small parts test after torque test)	-	1000	for single clause.
4.26(b) - 5.24.6.1 - 5.4( Mouth-actuated toys-small parts test after tension test, general procedure)	-	1000	for single clause.
4.26(c ) - 5.20 - 5.2( Mouth-actuated toys-small parts test after durability of mouth-actuated toys)	-	1000	for single clause.
4.27(Toy roller skates, toy inline skates and toy skateboards)	-	1000	for single clause.
4.28( Percussion caps specifically designed for use in toys)	-	1000	for single clause.
4.28( Percussion caps specifically designed for use in toys)	-	1000	for single clause.
4.29(a) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	1000	for single clause.
4.29(b) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	1000	for single clause.
4.29(c) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	1000	for single clause.
4.29(d) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	1000	for single clause.
4.29(e) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	1000	for single clause.
4.29(f) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	1000	for single clause.
4.29(g) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	1000	for single clause.
4.30.2(Toy scooters-Warnings and instructions for use)	-	1000	for single clause.
4.30.3 - 5.26 - 5.8(Toy scooters-Strength-After static strength for toy scooters- sharp edge test)	-	1000	for single clause.
4.30.3 - 5.26 - 5.9(Toy scooters-Strength-static strength for toy scooters-sharp-point test)	-	1000	for single clause.
4.30.3 - 5.26(Toy scooters-Strength-static strength for toy scooters)	-	1000	for single clause.
4.30.3 - 5.26(Toy scooters-Strength-static strength for toy scooters)	-	1000	for single clause.
4.30.3 - 5.27 - 5.8(Toy scooters-Strength-dynamic strength for toy scooters- sharp-edge test)	-	1000	for single clause.
4.30.3 - 5.27 - 5.9(Toy scooters-Strength-dynamic strength for toy scooters-sharp-point test)	-	1000	for single clause.
4.30.3 - 5.27(Toy scooters-Strength-dynamic strength for toy scooters)	-	1000	for single clause.
4.30.3 - 5.27(Toy scooters-Strength-dynamic strength for toy scooters)	-	1000	for single clause.
4.30.3 - 5.29(Toy scooters-Strength-strength of toy scooter steering tubes)	-	1000	for single clause.
4.30.3 - 5.29(Toy scooters-Strength-strength of toy scooter steering tubes)	-	1000	for single clause.
4.30.4 - 5.12.2(Toy scooters-Stability-sideways stability test, feet available for stabilization)	-	1000	for single clause.
4.30.5(a)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	1000	for single clause.
4.30.5(a)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	1000	for single clause.
4.30.5(b)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	1000	for single clause.
4.30.5(c)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	1000	for single clause.
4.30.5(d)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	1000	for single clause.
4.30.5(e)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	1000	for single clause.
4.30.5(f) - 5.30( Toy scooters-Adjustable and folding steering tubes and handlebars-resistance to separation of handlebar)	-	1000	for single clause.
4.30.6 ( Toy scooters-Braking)	-	1000	for single clause.
4.30.6 - 5.28( Toy scooters-Braking- force required to hold the toy)	-	1000	for single clause.
4.30.7( Toy scooters-Wheel size(diameter))	-	1000	for single clause.
4.30.8(Toy scooters-Projections)	-	1000	for single clause.
4.30.8(Toy scooters-Projections(rounded handlebar grips or plugs Diameter))	-	1000	for single clause.
4.30.8(Toy scooters-Projections(rounded handlebar grips or plugs space from end))	-	1000	for single clause.
4.31(Magnets and magnetic components-Magnetic/electrical experimental sets intended for children 8 years and over)	-	1000	for single clause.
4.31.1 - 5.32(Magnets and magnetic components-Magnetic/electrical experimental sets intended for children 8 years and over-magnetic flux index)	-	1000	for single clause.
4.31.1 - 5.2(Magnets and magnetic components-Magnetic/electrical experimental sets intended for children 8 years and over-small parts test)	-	1000	for single clause.
4.31.2(a) - 5.32(Magnets and magnetic components-All other toys with magnets and magnetic components-magnetic flux index)	-	1000	for single clause.
4.31.2(a) - 5.32(Magnets and magnetic components-All other toys with magnets and magnetic components-small parts test)	-	1000	for single clause.
4.31.2(b) - 5.34 - 5.2(Magnets and magnetic components-All other toys with magnets and magnetic components-soaking test for magnets-small parts test)	-	1000	for single clause.
4.31.2(c ) - 5.31 - 5.24.2 - 5.24.3 - 5.24.5 - 5.24.6.1 - 5.24.6.2 - 5.33 - 5.31 - 5.32(Magnets and magnetic components-All other toys with magnets and magnetic components-magnetic flux index After Following tests: -tension test for magnets; -drop test/tip over test for large and bulky toys; -torque test; -tension test, general procedure; -tension test for seams in soft-filled (stuffed) toys, beanbag-type toys and other similar filled toys, if applicable; -impact test for magnets; -compression test; -tension test for magnets;)	-	1000	for single clause.
4.31.2(c ) - 5.31 - 5.24.2 - 5.24.3 - 5.24.5 - 5.24.6.1 - 5.24.6.2 - 5.33 - 5.31 - 5.2(Magnets and magnetic components-All other toys with magnets and magnetic components-small parts test After Following tests: -tension test for magnets; -drop test/tip over test for large and bulky toys; -torque test; -tension test, general procedure; -tension test for seams in soft-filled (stuffed) toys, beanbag-type toys and other similar filled toys, if applicable; -impact test for magnets; -compression test; -tension test for magnets;)	-	1000	for single clause.
4.32 - 5.38.2( Yo-yo balls - length (lo) of the yo-yo ball tether)	-	1000	for single clause.
4.32 - 5.38.1( Yo-yo balls - The ratio of the mass m (in grams) to the elastic constant k of the yo-yo ball tether(m/k))	-	1000	for single clause.
4.33 - 5.11.3(Straps intended to be worn fully or partially around the neck-breakaway feature separation test)	-	1000	for single clause.
4.34(Sledges and toboggans with cords for pulling)	-	1000	for single clause.
4.35.3 - 5.39(Jaw entrapment in handles and steering wheels-jaw entrapment test)	-	1000	for single clause.
9873 (Part - 2) 4.5 - 5.5(Soft-filled toys-Test for soft-filled toys )	-	1500	For Applicable Clause.
9873 (Part - 2) 4.5 - 5.5(Soft-filled toys-rate of spread of flame )	-	1500	For Applicable Clause.
9873 (Part - 2) 4.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	1500	For Applicable Clause.
9873 (Part - 2) 4.4 - 5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	1500	For Applicable Clause.
9873 (Part - 2) 4.4 - 5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	1500	For Applicable Clause.
9873 (Part - 2) 4.4 - 5.4(Toys intended to be entered by a child-rate of spread of flame)	-	1500	For Applicable Clause.
9873 (Part - 2) 4.3(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play)	-	1500	For Applicable Clause.
9873 (Part - 2) 4.3 - 5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	1500	For Applicable Clause.
9873 (Part - 2) 4.3 - 5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-rate of spread of flame)	-	1500	For Applicable Clause.

31 Dec, 2026

-
-

10014

Nemko India (Test Lab) Pvt. Ltd., Faridabad

8138426

IS 16333 : Part 3 (2022)

Mobile phone handsets: Part 3 Indian language support for mobile phone handsets - Specific requirements(Second Revision)

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Inputting of text)	-	25000	10% discount to BIS
5.2(Message Readability)	-	10000	10% discount to BIS
5.1(Inputting of text)	-	25000	10% discount to BIS
5.2(Message Readability)	-	10000	10% discount to BIS

31 Dec, 2026

-
-

10015

Nemko India (Test Lab) Pvt. Ltd., Faridabad

8138426

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

150000 View breakup
Earphone=Rs. 75000/-, Musical System=Rs. 120000/-, TV=Rs. 130000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	4500	Cl. 5 : Marking and instructions
6(Hazardous radiations)	-	0	Qualitative Test
7(Heating under normal operating conditions)	-	12000	Cl. 7 : Heating under normal operating condition
8(Constructional requirements with regard to the protection against electric shock)	-	7500	Cl. 8 : Construction requirments with regard to the protection against electric shock
9(Electric shock hazard under normal operating conditions)	-	15000	Cl. 9 : "Electric shock hazard under normal operating conditions"
10(Insulation requirements)	-	18000	Cl. 10 : Insulation requirments
11(Fault conditions)	-	24000	Cl. 11 : Fault conditions
12(Mechanical strength)	-	19500	Cl. 12 : Mechanical Strength
13(CLEARANCES and CREEPAGE DISTANCES)	-	12000	Cl. 13 : clearance and creepage distances
14(Components)	-	0	Qualitative Test
15(TERMINALS)	-	3000	Cl. 15 : Terminals
16(External flexible cords)	-	7500	Cl. 16 : External flexible cord
17(Electrical connections and mechanical fixings)	-	3000	Cl. 17 : Electrical connection and mechanical fixings
18(Mechanical strength of picture tubes and protection against the effects of implosion)	-	0	Qualitative Test
19(Stability and mechanical hazards)	-	7500	Cl. 19 : Stability and mechanical hazards
20(Resistance to fire)	-	15000	Cl. 20 : Resistance to fire
3(General requirements)	-	0	N/A
4(General test conditions)	-	0	N/A
Annex-A(Additional requirements for apparatus with protection against splashing water)	-	0	N/A
Annex-B(Apparatus to be connected to the TELECOMMUNICATION NETWORKS)	-	0	N/A
Touch current measured from terminal devices using the network in annex D(Touch current measured from terminal devices using the network in annex D)	-	0	N/A
Annex-L(Additional requirements for electronic flash apparatus for photographic purposes)	-	0	N/A

31 Dec, 2026

-
Exclusion: Cl. 6 (Hazardous radiations), Cl. 8 (Constructional requirements with regard to the protection against electric shock), Cl. 14 (Components), Cl. 16 (External flexible cords), Cl. 18 (Mechanical strength of picture tubes and protection against the effects of implosion), Annex-L (Additional requirements for electronic flash apparatus for photographic purposes), Cl. 8.16 Requirements for insulated winding wires for use without additional interleaved insulation , Cl. 8.17 Endurance test for wound components with insulated winding wires without additional interleaved insulation, Cl. 16.1 MAINS supply flexible cords, Cl. 16.3 (b) Cord Bending test

10016

Nemko India (Test Lab) Pvt. Ltd., Faridabad

8138426

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

124000 View breakup
Keyboard=Rs. 75000/-, ATM=Rs. 135000/-, USB Type HDD=Rs. 90000/-, USB Type SDD=Rs. 90000/-, SMPS=Rs. 90000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.5(Components)	-	2000	10% (Discount offered to BIS)
1.6(Power interface .)	-	1000	10% (Discount offered to BIS)
1.7(Markings and instructions)	-	3200	10% (Discount offered to BIS)
2.1(Protection from electric shock and energy hazards)	-	8500	10% (Discount offered to BIS)
2.2(SELV circuits)	-	4000	10% (Discount offered to BIS)
2.3(TNV circuits)	-	3500	10% (Discount offered to BIS)
2.4(Limited current circuits)	-	3500	10% (Discount offered to BIS)
2.5(Limited power sources .)	-	4500	10% (Discount offered to BIS)
2.6(Provisions for earthing and bonding)	-	3600	10% (Discount offered to BIS)
2.7(Overcurrent and earth fault protection in primary circuits)	-	2000	10% (Discount offered to BIS)
2.8(Safety interlocks)	-	2000	10% (Discount offered to BIS)
2.9(Electrical insulation)	-	3000	10% (Discount offered to BIS)
2.10(Clearances, creepage distances and distances through insulation)	-	22000	10% (Discount offered to BIS)
3.1(General)	-	1000	10% (Discount offered to BIS)
3.2(Connection to a mains supply)	-	2200	10% (Discount offered to BIS)
3.3(Wiring terminals for connection of external conductors)	-	1000	10% (Discount offered to BIS)
3.4(Disconnection from the mains supply)	-	1000	10% (Discount offered to BIS)
3.5(Interconnection of equipment)	-	1000	10% (Discount offered to BIS)
4.1(Stability)	-	3000	10% (Discount offered to BIS)
4.2(Mechanical strength)	-	3600	10% (Discount offered to BIS)
4.3(Design and construction)	-	2000	10% (Discount offered to BIS)
4.4(Protection against hazardous moving parts)	-	2000	10% (Discount offered to BIS)
4.5(Thermal requirements)	-	4000	10% (Discount offered to BIS)
4.6(Openings in enclosures)	-	2000	10% (Discount offered to BIS)
4.7(Resistance to fire)	-	2000	10% (Discount offered to BIS)
5.1(Touch current and protective conductor curren)	-	8000	10% (Discount offered to BIS)
5.2(Electric strength)	-	12500	10% (Discount offered to BIS)
5.3(Abnormal operating and fault conditions)	-	10500	10% (Discount offered to BIS)
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	2000	10% (Discount offered to BIS)
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	2200	10% (Discount offered to BIS)
6.3(Protection of the telecommunication wiring system from overheating)	-	2000	10% (Discount offered to BIS)
7.1(General)	-	1500	10% (Discount offered to BIS)
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	1700	10% (Discount offered to BIS)
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	1500	10% (Discount offered to BIS)
7.4(Insulation between primary circuits and cable distribution systems)	-	1500	10% (Discount offered to BIS)

31 Dec, 2026

-
Exclusion: Cl. 2.6 (Provisions for earthing and bonding), Cl. 2.8 (Safety interlocks), Cl. 2.10 (Clearances, creepage distances and distances through insulation), Cl. 3.1 (General), Cl. 3.2 (Connection to a mains supply), Cl. 4.2 (Mechanical strength), Cl. 4.3 (Design and construction), 5.3 (Abnormal operating and fault conditions), Cl.1.5 (Components), Annex U (Insulating winding wires for use without interleaved insulation), Annex CC (Evaluation of integrated circuit (IC) current limiters), Cl. Cl. 2.6.3.3 (Size of protective bonding conductors), Cl. Cl. 2.8.5 (Moving parts & Cl.2.8.7 Switches & Relays), Cl. 2.10.5.4 (Semiconductor Devices), Cl. 2.10.5.11 (Insulation in wound components), Cl. 2.10.5.12 (wire in wound components), Cl. 2.10.5.13 (wire with solvent based enamel in wound component), Cl. 2.10.5.14 (Additional insulation in wound components), Cl. 2.10.11 (Test for semiconductor devices and for cemented joints), Cl. 2.10.12 (Enclosed and sealed parts), Cl. 3.1.4 Insulation of conductors, Cl.3.2.5.1 Power supply cords, Cl.4.2.8 Cathode Ray Tubes, Cl. 4.2.9 High pressure lamp, Cl. 4.3.10 liquids and gases, Cl. 4.3.11 Containers for liquids or gas, Cl.4.3.12 Flammable liquids, Cl.4.3.13.2 Ionizing Radiation, Cl.4.3.13.3 Effect of ultraviolet (UV) radiation on materials, Cl.4.3.13.4 Human exposure to ultraviolet (UV) radiation, Cl. 4.3.13.5. Lasers including LED, Cl.4.3.13.6 Other Types of radiation, Cl. 5.3.5 Electromechanical components, Cl. 5.3.8 Unattended equipment

10017

Nemko India (Test Lab) Pvt. Ltd., Faridabad

8138426

IS 16102 : Part 1 (2012)

Self - Ballasted led lamps for general lighting services: Part 1 safety requirements

LED BULB

29000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking)	-	500	10% discount to BIS
6(Interchangeability)	-	1000	10% discount to BIS
7(Protection against accidental contact with live parts)	-	4000	10% discount to BIS
8(Insulation Resistance and Electric Strength)	-	7000	10% discount to BIS
9(MECHANICAL STRENGTH)	-	5000	10% discount to BIS
10(cap temperature)	-	4000	10% discount to BIS
11(Resistance to Heat)	-	4000	10% discount to BIS
12(Resistance to Flame and Ignition)	-	2000	10% discount to BIS
14(Creepage distance and clearances)	-	500	10% discount to BIS
13(Fault conditions)	-	1000	10% discount to BIS
4(GENERAL REQUIREMENT AND GENERAL TEST REQUIREMENTS)	-	0	N/A

31 Dec, 2026

-
-

10018

Nemko India (Test Lab) Pvt. Ltd., Faridabad

8138426

IS 16046 : Part 1 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 1 Nickel Systems ( Second Revision )

Secondary Cells and Batteries (Nickel Systems)

159000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	0	N/A
5(General Safety Considerations)	-	0	N/A
5.1(General)	-	0	N/A
5.2(Insulation and Wiring)	-	5000	IR Test
5.3(Venting)	-	0	N/A
5.4(Temperature, Voltage and Current Management)	-	0	N/A
5.5(Terminal Contacts)	-	0	N/A
5.6(Assembly of Cells into batteries)	-	0	N/A
5.7(Quality Plan)	-	0	N/A
6(Tyoe Test amd Sample Size)	-	0	N/A
7(Specific requirements and tests)	-	0	N/A
7.1(Charging procedure for test purposes)	-	19000	Charging and Discharging
7.2(Intended Use)	-	48000	7.2.1(INR18000) 7.2.2(INR13000) 7.2.4(INR17000)
7.3(Reasonably foreseeable misuse)	-	92000	7.3.1(INR7000) 7.3.2(INR14000) 7.3.3(INR7000) 7.3.4(INR11000) 7.3.5(INR9000) 7.3.6(INR10000) 7.3.7(INR12000) 7.3.8(INR14000) 7.3.9(INR8000)
8(Information for safety)	-	0	N/A
8.1(General)	-	0	N/A
8.2(Small Cell and battery safety information)	-	0	N/A
9(Marking)	-	0	N/A
9.1(Cell Marking)	-	0	N/A
9.2(Battery Marking)	-	0	N/A
9.3(Caution for ingestion of small cells and batteries)	-	0	N/A
9.4(Other information)	-	0	N/A
10(Packaging)	-	0	N/A

31 Dec, 2026

-
-

10019

Nemko India (Test Lab) Pvt. Ltd., Faridabad

8138426

IS 15885 : Part 2 : Sec 13 (2012)

Safety of lamp controlgear: Part 2 particular requirements: Sec 13 d.c. or a.c. supplied electronic controlgear for led modules

CONTROLGEAR

42000 View breakup
Rs.42,000/- [10% discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	500	10% discount to BIS
8(Protection against accidental contact with live parts)	-	4000	10% discount to BIS
9(Terminals)	-	3000	10% discount to BIS
10(PROVISION FOR EARTHING)	-	2000	10% discount to BIS
11(MOISTURE RESISTANCE)	-	6000	10% discount to BIS
12(Electric Strength)	-	2500	10% discount to BIS
16(Construction)	-	500	10% discount to BIS
17(Creepage distance and clearances)	-	3000	10% discount to BIS
18(Screws, current carrying parts and connections)	-	1500	10% discount to BIS
19(Resistance to heat, fire and tracking)	-	6000	10% discount to BIS
20(Resistance to corrosion)	-	1000	10% discount to BIS
14(Fault conditions)	-	6000	10% discount to BIS
15(Transformer heating)	-	6000	10% discount to BIS
4(GENERAL REQUIREMENTS)	-	0	N/A
5(GENERAL NOTES ON TESTS)	-	0	N/A
6(CLASSIFICATION)	-	0	N/A

31 Dec, 2026

-
Exclusion: Cl. 16 (Bridging resistor in primary circuit, Capacitor and RC units, RF suppression (X-Y capacitors, Inductor, MOV/VDR, Fuse, Internal wire, Opto-coupler, EMI/EMC filter, SMPS/Mains Transformer, PCB material, Insulated tape, Heat shrinkage sleeve, LED, Winding wire

10020

HEXIQON LABORATORY PRIVATE LIMITED, AHMEDABAD

7167306

IS 2556 : Part 16 (2002)

Vitreous sanitary appliances (Vitreous China) - Specification: Part 16 specific requirements of wash down wall mounted water closets

Pattern 1 , Pattern 2 and any other patterns and sizes

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
"3 IS 2556(P1)"(GENERAL REQUIREMENTS)	-	2500	-
4(PATTERNS)	-	200	-
"5 Table 1 & 2 "(DIMENSIONS AND TOLERANCES)	-	200	-
"5 Table 1 & 2 "(A)	-	200	-
"5 Table 1 & 2 "(H)	-	200	-
"5 Table 1 & 2 "(J)	-	200	-
"5 Table 1 & 2 "(K)	-	200	-
"5 Table 1 & 2 "(L)	-	200	-
"5 Table 1 & 2 "(O)	-	200	-
"5 Table 1 & 2 "(PATTERNS)	-	200	-
"5 Table 1 & 2 "(Q)	-	200	-
"5 Table 1 & 2 "(S)	-	200	-
"5 Table 1 & 2 "(T)	-	200	-
"5 Table 1 & 2 "(W1)	-	200	-
"5 Table 1 & 2 "(W2)	-	200	-
"5 Table 1 & 2 "(E)	-	200	-
"5 Table 1 & 2 "(F)	-	200	-
"5 Table 1 & 2 "(D)	-	200	-
"5 Table 1 & 2 "(D1)	-	200	-
"5 Table 1 & 2 "(D2/2)	-	200	-
"5 Table 1 & 2 "(f3)	-	200	-
"5 Table 1 & 2 "(f2)	-	200	-
"5 Table 1 & 2 "(R)	-	200	-
"5 Table 1 & 2 "(n)	-	200	-
"5 Table 1 & 2 "(P1)	-	200	-
"5 Table 1 & 2 "(P2)	-	200	-
"5 Table 1 & 2 "(P3)	-	200	-
"5 Table 1 & 2 "(D3)	-	200	-
"5 Table 1 & 2 "(V)	-	200	-
"5 Table 1 & 2 "(M)	-	200	-
"5 Table 1 & 2 "(X)	-	200	-
"5 Table 1 & 2 "(N)	-	200	-
6.1(CONSTRUCTION)	-	200	-
6.2(CONSTRUCTION)	-	200	-
6.3(CONSTRUCTION)	-	200	-
7(FINISH)	-	200	-
8.1()	-	200	-
8.2(Smudge Test)	-	200	-
8.3(Holding Capacity Test)	-	200	-
8.4(Single Ball Test)	-	200	-
9(LOAD TEST)	-	1000	-
"3 IS 2556(P1)"(GENERAL REQUIREMENTS)	-	2500	-
4(PATTERNS)	-	200	-
"5 Table 1 & 2 "(DIMENSIONS AND TOLERANCES)	-	200	-
"5 Table 1 & 2 "(A)	-	200	-
"5 Table 1 & 2 "(H)	-	200	-
"5 Table 1 & 2 "(J)	-	200	-
"5 Table 1 & 2 "(K)	-	200	-
"5 Table 1 & 2 "(L)	-	200	-
"5 Table 1 & 2 "(O)	-	200	-
"5 Table 1 & 2 "(PATTERNS)	-	200	-
"5 Table 1 & 2 "(Q)	-	200	-
"5 Table 1 & 2 "(S)	-	200	-
"5 Table 1 & 2 "(T)	-	200	-
"5 Table 1 & 2 "(W1)	-	200	-
"5 Table 1 & 2 "(W2)	-	200	-
"5 Table 1 & 2 "(E)	-	200	-
"5 Table 1 & 2 "(F)	-	200	-
"5 Table 1 & 2 "(D)	-	200	-
"5 Table 1 & 2 "(D1)	-	200	-
"5 Table 1 & 2 "(D2/2)	-	200	-
"5 Table 1 & 2 "(f3)	-	200	-
"5 Table 1 & 2 "(f2)	-	200	-
"5 Table 1 & 2 "(R)	-	200	-
"5 Table 1 & 2 "(n)	-	200	-
"5 Table 1 & 2 "(P1)	-	200	-
"5 Table 1 & 2 "(P2)	-	200	-
"5 Table 1 & 2 "(P3)	-	200	-
"5 Table 1 & 2 "(D3)	-	200	-
"5 Table 1 & 2 "(V)	-	200	-
"5 Table 1 & 2 "(M)	-	200	-
"5 Table 1 & 2 "(X)	-	200	-
"5 Table 1 & 2 "(N)	-	200	-
6.1(CONSTRUCTION)	-	200	-
6.2(CONSTRUCTION)	-	200	-
6.3(CONSTRUCTION)	-	200	-
7(FINISH)	-	200	-
8.1()	-	200	-
8.2(Smudge Test)	-	200	-
8.3(Holding Capacity Test)	-	200	-
8.4(Single Ball Test)	-	200	-
9(LOAD TEST)	-	1000	-
" Cl-5 Table-1 (vii)"(Width of opening, Min)	-	200	-
Clause 3 and Clause 9.3 of IS 2556 (Part 1)(Water absorption)	-	1500	-
Clause 3 and Clause 5.2 of IS 2556 (Part 1)(Lead solubility test)	-	800	-
Clause 3 and Clause 7 of IS 2556 (Part 1)(Minimum thickness)	-	100	-
Clause 3 and Clause 9.1 of IS 2556 (Part 1)(Warpage)	-	100	-
Clause 3 and Clause 9.2 of IS 2556 (Part 1)(Crazing)	-	1200	-
Clause 3 and Clause 9.4 of IS 2556 (Part 1)(Modulus of Rupture)	-	1500	-
Clause 3 and Clause 9.5 of IS 2556 (Part 1)(Chemical resistance)	-	1500	-
Clause 3 and Clause 9.6 of IS 2556 (Part 1)(Resistance to staining and burning)	-	1000	-
Clause 3 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)(General-Wavy finish)	-	200	-
Clause 3 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)(General-Warpage)	-	100	-
Clause 3 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)(General- Other appliances)	-	200	-
Clause 3 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)(General- Accessories)	-	200	-
Clause 3 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)(General- Bit)	-	200	-
Clause 3 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)(General- Discoloration)	-	200	-
Clause 3 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)("Flushing surface and horizontal face of rims of WC pans, squatting pans, bidets and urinals- Spots, blisters and pinholes")	-	200	-
Clause 3 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)("Flushing surface and horizontal face of rims of WC pans, squatting pans, bidets and urinals-Bubbles and specks")	-	200	-
Clause 3 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)("Flushing surface and horizontal face of rims of WC pans, squatting pans, bidets and urinals-Polishing marks")	-	200	-
Clause 3 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)("Visible surfaces other than above-Spots, blisters and pinholes ")	-	200	-
Clause 3 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)("Visible surfaces other than above-Bubbles and specks")	-	200	-
Clause 3 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)("Visible surfaces other than above-Polishing marks")	-	200	-
Clause 3 and Clause 5 of of IS 2556 (Part 1)(Application of glazing)	-	200	-
Clause 3 and Clause 6.4 of IS 2556 (Part 1)(Illumination during visual observation)	-	200	-

-
Included w.e.f. 10.04.2024

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number