BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

10734 Results

S.No.

Lab Name

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

10261

BIS, Western Regional Laboratory (WRL)

IS 15490 (2017)

Seamless steel cylinders for on - Board storage of compressed natural gas as a fuel for automotive vehicles - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.2 (Cylinder shape and wall thickness)	-
7.6 (Out-of-Roundness)	-
7.7 (Mean Diameter)	-
7.8 (Straightness)	-
9.3.1 (Tensile Strength)	-
9.3.2 (Bend test)	-
9.3.3 (Impact test)	-
5.2.1,5.2.2,5.3 (Carbon)	-
5.2.1,5.2.2,5.3 (Manganese)	-
5.2.1,5.2.2,5.3 (Silicon)	-
5.2.1,5.2.2,5.3 (Sulphur)	-
5.2.1,5.2.2,5.3 (Phosphorus)	-

-
Test facilities are not available for the following: 1. Cr, Ni, Mo, V, Al, N, B, Zr 2.Pressure cycling Test 3. Base check 4. Hydrostatic Stretch Test 5. Leakage Test 6.Neck threads 7. Surface Defects 8. Verticality 9. Hydraulic Bursting Test 10. Sulphide Stress Cracking Resistance Test 11 Ultrasonic testing 12 Leakage before breakage test 13 Bonfire test Remark: Prepared piece for tensile (2 nos), bend (4 nos) and impact (3 nos)

10262

BIS, Western Regional Laboratory (WRL)

IS 7285 : Part 1 (2018)

Refillable seamless steel gas cylinders - Specification: Part 1 normalized steel cylinders (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.5 (Mean Diameter)	-
10.1.3 a) & Clause 5.4 Table 3, i) ( Tensile strength (Rg) )	-
10.1.3 a) & Clause 5.4 Table 3, ii) ( Yield strength (Re))	-
Clauses 6.8 and 10.3.1,Table 4 iii), Sr.no.3 (Impact Test-Cylinder Diameter Dm >140 mm i) Direction- Transverse: ii) Test temperature, in °C –20)	-
Clauses 5.2.1 and 5.4, Table 1 (Controls on Chemical Composition)	-

-
Test facilities are not available for the following: 1. Cr, Ni, Mo, V, Al, N, B, Zr 2.Pressure cycling Test 3. Base check 4. Hydrostatic Stretch Test 5. Leakage Test 6.Neck threads 7. Surface Defects 8. Verticality 9. Hydraulic Bursting Test 10. Sulphide Stress Cracking Resistance Test 11 Ultrasonic testing Remark: Prepared piece for tensile (2 nos), bend (4 nos) and impact (3 nos)

10263

BIS, Central Laboratory (CL)

IS 3039 (1988)

Specification for structural steel for construction of hulls of ships (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 6.1 & Table 1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1 & Table 1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1 & Table 1 (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1 & Table 1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1 & Table 1 (Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1 & Table 1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

10264

BIS, Western Regional Laboratory (WRL)

IS 7142 (1995)

Welded low carbon steel cylinders for low pressure liquifiable gases not exceeding 5 litre water capacity - Specification (First Revision)

Rs. 9552/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
13 (CHECKING OF WATER CAPACITY)	-
15.1 (PNEUMATIC LEAKAGE TEST)	-
17.3 i) (Acceptance test Parent Metal Longitudinal test specimen;)	-
17.3 ii) (Acceptance test Parent Metal Longitudinal test specimen;)	-
17.3 iii) (Acceptance test Parent Metal Longitudinal test specimen;)	-
17.3 v) (Acceptance test Parent Metal Circumferential test specimen;)	-
17.3 vi) (Acceptance test Parent Metal Circumferential test specimen;)	-
17.3 vii) (Acceptance test Weld joint test Specimen)	-
17.4 (Bend test across weld)	-
17.6 (Minimum Thickness Test)	-
14.1.1 (PROOF TEST)	-

-
Test facilities are not available for the following: 1. Thread gauges

10265

BIS, Western Regional Laboratory (WRL)

IS 7092 : Part 2 (1987)

Specification for aluminium alloy tube for irrigation purposes: Part 2 extruded tube (Second Revision)

Rs 11230/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.6.2 (Ultimate Tensile Strength- IS 2657)	-
Cl.6.2 (0.2 percent proof strength- IS 2657)	-
Cl.6.2 (Elongation on 50 mm gauge length- IS 2657)	-
Cl. 6.3 (Drift Expanding Test ( Expanded Inside Diameter- IS 2335)	-
Cl. 6.4 (Hydrostatic Pressure Test-Cl. 6.4)	-
Cl.7.1, Table 2 (Outside Diameter-)	-
Cl.7.1, Table 2 (Roundness or Ovality)	-
Cl.7.1, Table 2 (Wall Thickness)	-
Cl. 7.2 (Length)	-

-
" 1. Tensile Test 2. Hydrostatic Machine "

10266

BIS, Western Regional Laboratory (WRL)

IS 6603 (2001)

Stainless steel bars and flats - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1 (Carbon -Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1 (Silicon- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1 (Manganese- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1 (Sulphur- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1 (Phosphorus- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-
9.1, Table 3 (0.2 Percent Proof Stress, MPa)	-
9.2, Table 3 (Tensile Strength, MPa)	-
9.3, Table 3 (Elongation ,Percent)	-
9.4, Table 3 (Annealed Hardness, HB-IS 1500: Pt 1)	-
12 (Dimensions & Tolerances, mm-IS 6603)	-
9.5, Table 3 (Charpy Impact Test, J-IS 1499)	-

-
Test facilities are not available for the following: 1. Ti, Nb, Mo, Cu 2. Corrosion resistance Remark: Prepared piece of impact (3 nos)

10267

BIS, Central Laboratory (CL)

IS 2831 (2012)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into structural steel (Ordinary Quality) - Specification (Fourth Revision)

Rs. 4500/- View breakup
Excluding Macro examination and Sulphur print

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 6.1, Table 1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1, Table 1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1, Table 1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1, Table 1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1, Table 1 (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1, Table 1 (Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1, Table 1 (Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-

-
"Grade designation to be declared. Microalloying element/type of killing (element)/any other element to be declared. Sample size shall be minimum dia> 3mm and thickness > 0.8 mm; "

10268

BIS, Western Regional Laboratory (WRL)

IS 6529 (1996)

Stainless steel blooms, billets and slabs for forging - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1,7.2,7.3 Table 1 (Carbon-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
7.1,7.2,7.3 Table 1 (Sulphur-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
7.1,7.2,7.3 Table 1 (Phosphorous-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
7.1,7.2,7.3 Table 1 (Manganese-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
7.1,7.2,7.3 Table 1 (Silicon-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-

-
Test facilities are not available for the following: 1. Ni, Cr, Mo, Ti, Nb, N 2. Corrosion Test

10269

BIS, Northern Regional Laboratory (NRL)

IS 6006 (2014)

Uncoated stress relieved strand for prestressed concrete - Specification (Second Revision)

Rs 4035/- Excluding Proof Stress and Relaxation Test View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5 (Weight)	-
Cl 7 (Tensile Test On UTM)	-
Cl 4 (Length )	-
Cl 4.5 (Workmanship)	-
Cl 4.5 (Workmanship)	-
Cl 4.5 (Workmanship)	-
Cl 4.5 (Workmanship)	-
4.1.2 (sulphur)	-
4.1.2 (phosphorus)	-

-
Test Facility Complete for Chemical Except Stress relaxation test, Proof stress

10270

BIS, Northern Regional Laboratory (NRL)

IS 3575 (1993)

Bitumen drums - Specification (Third Revision)

- View breakup
Rs. 1800/- and Material testing charges as per relevant referred Iss

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Dimensions Drums (Figure 1))	-
4.1 (Dimensions Closure (Figure 2))	-
7.1 (Finish)	-
7.2 (Finish)	-

-
Except air pressure test and Microalloying elements

10271

BIS, Western Regional Laboratory (WRL)

IS 14333 (1996)

High Density Polyethylene Pipe For Sewerage -

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 (Dimensions of pipes)	-
8.1 (Hydraulic characteristics)	-
8.2 (Reversion)	-
8.4 (Melt Flow Rate)	-
Cl. 8.5, IS 2530-1963, Cl. 16 (Carbon Black Dispersion)	-
8.3 (Density)	-

-
The following test facilities are not available: (1)Internal Pressure creep rupture test (2)Tensile Strength for Butt-fusion (3) Slow Crack Growth rate test (4) Depth of strip (5) Overall Migration (7) Carbon Black content (8) For Size above 250 mm

10272

BIS, Western Regional Laboratory (WRL)

IS 6240 (2008)

Hot rolled steel plate (Up To 6 Mm) sheet and strip for the manufacture of low pressure liquefiable gas cylinders (Fourth Revision)

- View breakup
Rs.9710/- excluding Erichsen cupping test.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 13 (Length, Width & Thickness)	-
Cl 7 (UTM)	-
Cl 8 (Press)	-
Cl 7 (UTM)	-
6.1 (Carbon %)	-
6.1 (Manganese %)	-
6.1 (Phosphorus %)	-
6.1 (Sulphur %)	-
6.1 (Silicon %)	-

-
Test facilities are not available for the following: 1. Al, N, Micro alloying element 2. Erichsen Cuppling Machine

10273

BIS, Western Regional Laboratory (WRL)

IS 11513 (2017)

Hot rolled carbon steel strip for cold rolling purposes - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 9 (Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width )	-
6.1 (Carbon %)	-
6.1 (Manganese %)	-
6.1 (Phosphorus %)	-
6.1 (Sulphur %)	-
6.1 (Silicon %)	-

-
Test facilities are not available for the following: 1. Micro alloy, N, Al, Cu, Cr, Mo, Ni

10274

BIS, Northern Regional Laboratory (NRL)

IS 6911 (2017)

Stainless steel plate, sheet and strip - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
10.1,Table 4&Table 6 (Tensile Test - IS 1608(Pt -1))	-
10.2,Table 4&Table 5 (Hardness Test- IS 1500(Pt -1),IS 1501 (Pt-1),IS 1586 (Pt -1))	-
17 (Dimension and tolerance)	-
6 (Freedom from defects , IS 6911)	-
15 (Surface Finish)	-

-
Facility for chemical testing is not available, Erichsen Cupping(Cl11), Corrosion(Cl 12), Proof stress

10275

BIS, Western Regional Laboratory (WRL)

IS 4923 (2017)

Hollow steel sections for structural use - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.7.1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.7.1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.7.1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.7.1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.7.1 (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.9.1, Table 1 (Dimensions and Properties of Hollow Sections (Depth))	-
Cl.9.1, Table 1 (Dimensions and Properties of Hollow Sections (Width))	-
Cl.9.1, Table 1 (Dimensions and Properties of Hollow Sections(Thickness))	-
Cl.9.1, Table 1 (Dimensions and Properties of Hollow Sections (Weigth))	-
Cl. 10.1, 14.1, 18.1 (Straightness)	-
Cl. 10.4, Fig 2 (Concavity, X1)	-
Cl. 10.4, Fig 2 (Convexity, X2)	-
Cl. 10.5, Fig 3 (Squareness of side)	-
Cl. 10.6, Fig 4 (External Corner Radius)	-
Cl. 10.5, Fig 3 (Squareness of side)	-
Cl. 10.6, Fig 4 (External Corner Radius)	-
Cl. 10.7, Fig 5 (Total twist, V)	-
Cl. 15.2, Table 3 (Tensile Strength- IS 1608)	-
Cl. 15.2, Table 3 (Yield Strength- IS 1608)	-
Cl. 15.2, Table 3 (Elongation- IS 1608)	-
Cl. 14.1 (Exact Length)	-
Cl. 14.1 (Weight on individual length)	-
Cl. 14.1 (Exact Length)	-
Cl. 14.1 (Weight on individual length)	-

-
Test facilities are not available for the following: 1. Cu

10276

BIS, Central Laboratory (CL)

IS 7231 (1994)

plastic flushing cisterns for waterclosets and urinals

Rs.8100/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5.1 (Cistern)	-
Cl 5.1 (Cistern)	-
Cl 5.2 (Cover)	-
Cl 5.3 (Flush pipe)	-
Cl 5.3 (Flush pipe)	-
Cl 5.4 (Inlet and overflow holes)	-
Cl 5.5 (Float valve)	-
Cl 5.6 (Operating mechanism / lever)	-
Cl 5.7 (String (Chain))	-
Cl 5.8 (Overflow pipe)	-
Cl 5.8 (Overflow pipe)	-
Cl 7.1 (Flushing Arrangements)	-
Cl 7.2 (Working water level)	-
Cl 7.3 (Freedom from self-siphonage)	-
Cl 7.4 (Reduced water level)	-
Cl 7.5 (Discharge capacity)	-
Cl 7.6 & 9.2 (Discharge rate )	-
Cl 8.1 (Distortion resistance test)	-
(Cl 8.2) (Dead load test)	-
(Cl 8.3) (Front thrust test)	-
(Cl 8.4) (Impact test)	-
(Cl 9.3) (Endurance test)	-
(Cl 9.3) (Endurance test)	-
(Cl.6) (Finish)	-

-
-

10277

BIS, Western Regional Laboratory (WRL)

IS 4270 (2001)

Steel tubes used for water wells specification (Third Revision)

Rs.7500/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 6 (Tensile Test & Flattening Test)	-
Cl 7 (Outer Diameter, Thickness, Mass & Straightness)	-
Cl 9 (Pipe ends, Angle of bevel & Root Face )	-
Cl 10 (Outer Diameter & Overall Length)	-
Cl 10 (Outer Diameter & Overall Length)	-
Cl 9 (Pipe ends, Angle of bevel & Root Face )	-
Cl 10 (Outer Diameter & Overall Length)	-
Cl 10 (Outer Diameter & Overall Length)	-
5.2 (phosphorus)	-
5.2 (sulphur)	-

-
Except Hydrostatic test (Cl.8)

10278

BIS, Northern Regional Laboratory (NRL)

IS 903 (1993)

Specification for Fire Hose Delivery Couplings, Branch Pipe, Nozzles And Nozzle Spanner - Specificaion

Rs 3600/ View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 (Finish and workmanship)	-
4 (Marking)	-
6 (Branch pipe)	-
6.3 (Hydraulic test requirement)	-
7 (Nozzle)	-
7.3 (Hydraulic test requirement)	-
5 (Delivery hose coupling)	-
5.3 (Size and Dimension )	-
5.4 (Hydraulic test requirement)	-

-
Facility for chemical testing is not available

10279

BIS, Northern Regional Laboratory (NRL)

IS 3502 (2009)

Steel chequered plates (Third Revision)

- View breakup
Rs. 2985/- and material testing charges as per relevant referred Iss

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 (UTM)	-
Cl 9 (Press)	-
Cl 10 (Length, Width, Thickness & Chequered Height)	-
Cl 10 (Length, Width, Thickness & Chequered Height)	-
Cl 10 (Length, Width, Thickness & Chequered Height)	-
Cl 10 (Length, Width, Thickness & Chequered Height)	-
Cl 10 (Length, Width, Thickness & Chequered Height)	-
Cl 5 (Workmanship)	-
Cl 6 (Workmanship)	-
Cl.4.1 (IS-2062, E250A) (CARBON)	-
Cl.4.1 (IS-2062, E250A) (SULPHUR)	-
Cl.4.1 (IS-2062, E250A) (PHOSPHURS)	-
Cl.4.1 (IS-2062, E250A) (MANGANESE)	-
Cl.4.1 (IS-2062, E250A) (SILICON)	-
Cl.4.1 (IS-2062, E250A) (CARBON EQUIVALENT)	-
Cl.4.1 (IS-2062, E250A) (NITROGEN)	-

-
Excluding Microalloying Elements

10280

BIS, Western Regional Laboratory (WRL)

IS 10748 (2004)

Hot - Rolled steel strip for welded tubes and pipes - Specification (Second Revision)

- View breakup
Rs.7050/- (For Grade-1, 2 & 3). Rs.10050/- (For Grade 4, 5 & 6 including Micro alloying elements)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 & Table 3 (UTM)	-
Cl 9 (Press)	-
Cl 12 & 13 (Length, Width & Thickness)	-
Cl 12 & 13 (Length, Width & Thickness)	-
7.1 (Carbon %)	-
7.1 (Manganese %)	-
7.1 (Phosphorus %)	-
7.1 (Sulphur %)	-
7.1 (Silicon %)	-

-
Test facilities are not available for the following: 1. V, Nb, Ti, Al, Nitrogen, Mn, Cr, Mo, V, Ni, Cu

10281

BIS, Northern Regional Laboratory (NRL)

IS 1038 (1983)

Specification For Steel Doors, Windows And Ventilators

- View breakup
Hence complete testing charges for the product are Rs.3000.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1. (Size-Height)	-
4.1 (Size-Width)	-
6.2 (Side Hung Shutter-Width of hinge)	-
6.2 (Side Hung Shutter- Thickness of hinge)	-
6.2 (Side Hung Shutter- Pin diameter)	-
6.2.2 & 6.2.2.1 (Handle and Handle Plate- Thicknesss of handle)	-
6.2.2 & 6.2.2.1 (Handle and Handle Plate-Height of handle plate)	-
6.2.3 (Peg Stay - Thickness)	-
6.2.3 (Peg Stay )	-
6.3 (Top Hung Ventilator-Thickness of hinge)	-
6.3 (Top Hung Ventilator-Pin diameter)	-
6.3 (Top Hung Ventilator-Width of hinge)	-
4.3 (Designation)	-
9 (Glazing- No of glazing clip against each plate)	-
8 (Finish)	-
7.2 Table 2 (Position of Fixing Screws)	-
7.1 (Position of Holes)	-
6.3 (Top Hung Ventilator)	-
6.1.1.1 (Visual Inspection Test)	-
6.1.1.2 (Macro Examination)	-
6.1.1.3 (Micro Examination)	-
6.2 (Side Hung Shutter)	-
5 (Material-Rolled Steel Section)	-
5 (Material-Coupling Section)	-
5 (Material-Glass Panels)	-
5 (Material-Screws)	-

-
Complete

10282

BIS, Western Regional Laboratory (WRL)

IS 4148 (1989)

Surgical rubber gloves - Specification (First Revision)

Rs. 3925/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.5 (pH of Aqueous Extract )	-
4.2 (Dimensions Fig 1 and Table 1)	-
4.2 (Dimensions Fig 1 and Table 1)	-
4.2 (Dimensions Fig 1 and Table 1)	-
4.2 (Dimensions Fig 1 and Table 1)	-
4.2 (Dimensions Fig 1 and Table 1)	-
4.2 (Dimensions Fig 1 and Table 1)	-
4.2 (Dimensions Fig 1 and Table 1)	-
4.2 (Dimensions Fig 1 and Table 1)	-
4.3 (Thickness)	-
4.4.2 (After accelerated aging at 70 + 1OC for 240 h )	-
4.4.3 (After heat ageing in autoclave)	-
4.4.4 (Tension Set)	-

-
-

10283

BIS, Central Laboratory (CL)

IS 8249 (2019)

Zinc sulphate heptahydrate, agricultural grade - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
(Clauses 3.2 and 6.2) Table 1 (Matter insoluble in water)	-
(Clauses 3.2 and 6.2) Table 1 (Zinc (as Zn))	-
(Clauses 3.2 and 6.2) Table 1 (Lead (as Pb))	-
(Clauses 3.2 and 6.2) Table 1 (Copper (as Cu))	-
(Clauses 3.2 and 6.2) Table 1 (Magnesium (as Mg))	-
(Clauses 3.2 and 6.2) Table 1 (pH)	-
(Clauses 3.2 and 6.2) Table 1 (Sulphur (as S))	-
(Clauses 3.2 and 6.2) Table 1 (Cadmium (as Cd))	-
(Clauses 3.2 and 6.2) Table 1 (Arsenic (as As))	-
3.1 (Description)	-
(Clauses 3.2 and 6.2) Table 1 (pH)	-
(Clauses 3.2 and 6.2) Table 1 (Sulphur (as S))	-
(Clauses 3.2 and 6.2) Table 1 (Cadmium (as Cd))	-
(Clauses 3.2 and 6.2) Table 1 (Arsenic (as As))	-
3.1 (Description)	-

-
500 gm x 3 Excluding Clause 3.2 Table 1 (iii)Lead, (iv) Copper, (v)Magnesium;

10284

BIS, Western Regional Laboratory (WRL)

IS 3589 (2001)

Steel pipes for water and sewage (168.3 To 2540 Mm Outside Diameter) - Specification (Third Revision)

- View breakup
Rs. 11800/- (for SAW Pipe ) Rs. 10380/- for (ERW Fe410 , Fe450 &Fe330)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
9.3 (Guided bend test(For SAW Pipes))	-
11.1, Table 5. (Outside Diameter (OD))	-
11.1, Table 5. (Thickness)	-
11.1, Table 5. (Mass)	-
12.3.3 (Ovality)	-
12.5 (Strightness)	-
9.2.1 (Flattening test for ERW pipes )	-
9.1 (Tensile test-Yield Strength)	-
9.1 (Tensile test-Strength)	-
9.1 (Tensile test- Elongation)	-
8.1 Table 2 Table 3 (Carbon Content IS 228)	-
8.1 Table 2 Table 3 (Manganese Content IS 228)	-
8.1 Table 2 Table 3 (Phosphorus Content IS 228)	-
8.1 Table 2 Table 3 (Sulphur Content IS 228)	-

-
Test facilities are not available for the following: 1. Al, Micro Alloying element (Nb, V, Ti) 2. Hydrostatic Pressure test 3. Size above 914 mm nominal diameter

10285

BIS, Northern Regional Laboratory (NRL)

IS 7092 : Part 2 (1987)

Specification for aluminium alloy tube for irrigation purposes: Part 2 extruded tube (Second Revision)

Rs 11230/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.6.2 (Ultimate Tensile Strength- IS 2657)	-
Cl. 6.4 (Hydrostatic Pressure Test-Cl. 6.4)	-
Cl.7.1, Table 2 (Outside Diameter-)	-
Cl.7.1, Table 2 (Wall Thickness)	-
Cl. 7.2 (Length)	-
Cl.4 (Workmanship & Finish)	-

-
Excluding proof stress and Facility for chemical testing is not available

10286

BIS, Western Regional Laboratory (WRL)

IS 3575 (1993)

Bitumen drums - Specification (Third Revision)

- View breakup
Rs. 1800/- and Material testing charges as per relevant referred Iss

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Dimensions Closure (Figure 2))	-
5.1 (Body and ends)	-
5.2 (Closures)	-
8 (Air Pressure Test)	-
4.1 (Dimensions Drums (Figure 1))	-
4.1 (Dimensions Drums (Figure 1))	-
4.1 (Dimensions Drums (Figure 1))	-
4.1 (Dimensions Drums (Figure 1))	-
4.1 (Dimensions Drums (Figure 1))	-
4.1 (Dimensions Closure (Figure 2))	-

-
-

10287

BIS, Western Regional Laboratory (WRL)

IS 3390 (1988)

Specification for sphygmomanometers, mercurial (Second Revision)

Rs 7800.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1.2 (Fastening)	-
4.1 (Metal Parts)	-
4.2 (Rubber Parts -Inflation Bulb)	-
4.2 (Rubber Parts:- Rubber Tubing BEFORE AGEING)	-
4.2 (Rubber Parts:- Rubber Tubing BEFORE AGEING)	-
4.2 (Rubber Parts:- Rubber Tubing AFTER AGEING)	-
4.2 (Rubber Parts:- Rubber Tubing AFTER AGEING)	-
4.8.2.1 (Cuff Dimension & fig 1)	-
4.8.2.1 (Cuff Dimension & fig 1)	-
4.8.2.1 (Cuff Dimension & fig 1)	-
4.8.3.1 & 4.8.3.2 (Inflating Bag)	-
4.8.3.1 & 4.8.3.2 (Inflating Bag)	-
4.8.4 (Tubing)	-
4.8.4 (Tubing)	-
4.9.1 (Pressure Measuring Device)	-
4.9.1 (Pressure Measuring Device)	-
4.9.3 (Reservoir and Connecting Tube)	-
4.9.4 (Extension Tube)	-

-
Separate prepared piece of raw material (16 nos) required for tensile and % elongation to be conducted before and after ageing.

10288

BIS, Western Regional Laboratory (WRL)

IS 3319 (1995)

Blades, surgical, detachable (Bard Parker Type) and handles - Specification (Fourth Revision)

Rs. 1650 View breakup
For physical tests(Excluding Sterility Test) Rs 2860/- for chemical tests Carbon Steel Blade Rs. 3360/- for chemical tests Stainless steel blade & Rs. 3360/- for chemical tests for Handle

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5,5.1 & 5.2; Table 1 (Shape and dimensions)	-
9.1 ( Visual Examination)	-
7.1 (Hardness test)	-
Clause -4, 4.1 (SILICON)	-
Clause -4, 4.1 (MANGANESE)	-
Clause -4, 4.1 (PHOSPHURS)	-
Clause -4, 4.1 (SULPHUR)	-
Clause -4, 4.1 ( CARBON)	-

-
Test facilities are not available for the following: 1. Ni, Cr, Mo, N, Al 2. hardness Test 3.Perfomance Test 4. Visual Examination

10289

BIS, Northern Regional Laboratory (NRL)

IS 6218 (2008)

Bicycle - Mudguards - Specification (First Revision)

- View breakup
Rs. 5400/- and material testing charges as per relevant referred ISs

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause-3 (Carbon)	-
Clause-3 (Sulphur)	-
Clause-3 (Phosphorus)	-
Clause-3 (Silicon)	-
Clause-3 (Nitrogen)	-
Cl 5.3(Mech) (The wraping of the mudguard shall lie within the limits )	-
Cl 5.1(Mech) (The paint shall not soften,peel off or show any change in colour after the test.)	-
Cl 4.3(Mech) (The painted part shall be free from wrinkles, blisters,unevenness,scratch marks and other injurious defects.)	-
Cl 4.2(Mech) (The mudguard shall be free from manufacturing defects and shall be chemically phosphated and and stove enamelled , spray painted or otherwise finished to give a glossy finish .)	-
Cl 4.1(Mech) (Thickness of steel strip)	-
Cl 4.1(Mech) (Depth of mudguard)	-
Cl 4.1(Mech) (Width of mudguard )	-
Cl 4(Mech) (Manufacture ,Workmanship ,& Finish )	-

-
Test facility for all test available but Separate sample of steel strip may be provided for thickness.

10290

BIS, Eastern Regional Laboratory (ERL)

IS 277 (2018)

Galvanized steel strips and sheets (Plain And Corrugated) - Specification (Seventh Revision)

For all grades except tests mentioned in remarks

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8.1 (UTM)	-
Cl 14 (Length, Width & Thickness)	-
Cl 13 (Weight)	-
Cl 12 (Workmanship)	-
5.1 (carbon)	-
5.1 (sulphur)	-
5.1 (phosphorus)	-
5.1 (manganese)	-
5.1 (silicon )	-
5.1 (nitrogen)	-
5.1 (aluminium)	-
cl 5.1, T-1, Note-5, For Microalloying elements (Ti)	-
5.1 (copper)	-
Cl. 9 (Surface roughness)	-

-
Chem- Facility not available for microalloying elements & Al. To specify Grade/Designation for base metal.

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number