BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

11900 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

10801

BIS, Central Laboratory (CL)

None

IS 9537 : Part 2 (1981)

Specification for conduits for electrical installations: Part 2 rigid steel conduits

Rs 2100/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (Marking, IS 9537-2)	-
6.1 (Marking, IS 9537-2)	-
6.1 (Marking, IS 9537-2)	-
6.2 (Marking, IS 9537-2)	-
6.3 (Marking, Cl. 6.4 of IS 9537-1)	-
7.2.1 (Dimensions, (Minimum outside Diameter), IS 9537-2)	-
7.2.2 (Dimensions (Maximum outside Diameter), IS 9537-2)	-
7.3 (Dimensions (Wall thickness), IS 9537-2)	-
7.3.3 (Uniformity of wall thickness, IS 9537-2)	-
8.1 (Construction, Cl. 8 of IS 9537-1)	-
8.2 (Construction, IS 9537-2)	-
9.3 (Mechanical Properties (Compression Test), IS 9537-2)	-

-
excluding Bending Test & Thread Gauge;

10802

BIS, Patna Branch Laboratory (PBL)

None

IS 10124 : Part 2 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 2 specific requirements for sockets (Second Revision)

Rs.1800/ View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2.1, Table-1, Fig-1 (Nominal size)	-
3.2.1, Table-1, Fig-1 (B)	-
3.2.1, Table-1, Fig-1 (Minimum wall thickness for working pressure)	-
3.2.1, Table-1, Fig-1 (Plumbing)	-
Clause 3.2.2, and Fig. 2 (Nominal size)	-
Clause 3.2.2, and Fig. 2. (B)	-
Clause 3.2.2, and Fig. 2. (Minimum wall thickness for working pressure)	-
3.2.2, and Fig. 2 (Dimensions of Socket for Elastomeric Sealing Ring Joint)	-

-
All test facilities are available as per the IS except- i. Short Term Hydrostatic Test (Clause 6.2) ii. Effect on Water (Clause 6.3)

10803

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING AND TECHNOLOGY (CIPET):CSTS-BHOPAL

8100534

IS 4148 (1989)

Surgical rubber gloves - Specification (First Revision)

15400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(Manufacture)	-	250	Nil
4.1.2(Manufacture)	-	0	Charges already taken
4.1.3(Manufacture)	-	0	Charges already taken
4.1.4(Manufacture)	-	0	Charges already taken
4.2(Dimensions Fig 1 and Table 1)	-	250	Nil
4.2(Dimensions Fig 1 and Table 1)	-	0	Charges already taken
4.2(Dimensions Fig 1 and Table 1)	-	0	Charges already taken
4.2(Dimensions Fig 1 and Table 1)	-	0	Charges already taken
4.2(Dimensions Fig 1 and Table 1)	-	0	Charges already taken
4.2(Dimensions Fig 1 and Table 1)	-	0	Charges already taken
4.2(Dimensions Fig 1 and Table 1)	-	0	Charges already taken
4.3(Thickness)	-	250	Nil
4.4.1(Physical Properties)	-	1350	Test charges Rs. 1100/- plus Rs. 250/ Specimen charges (25% discount is not applicable in specimen charges)
4.4.1(Physical Properties)	-	1350	Test charges Rs. 1100/- plus Rs. 250/ Specimen charges (25% discount is not applicable in specimen charges)
4.4.2(After accelerated aging at 70 + 1OC for 240 h )	-	6000	(25% discount is not applicable in Ageing charges)
4.4.2(After accelerated aging at 70 + 1OC for 240 h )	-	0	Test charges already taken
4.4.3(After heat ageing in autoclave)	-	2500	(25% discount is not applicable in Ageing charges)
4.4.3(After heat ageing in autoclave)	-	0	Charges already taken
4.4.4(Tension Set)	-	1350	Test charges Rs. 1100/- plus Rs. 250/ Specimen charges (25% discount is not applicable in specimen charges)
4.5(pH of Aqueous Extract )	-	750	Nil

31 Dec, 2026

-
Included w.e.f. 27-05-2022.

10804

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING AND TECHNOLOGY (CIPET):CSTS-BHOPAL

8100534

IS 3462 (1986)

Unbacked Flexible Pvc Flooring

19800 View breakup
Rs.17238/- (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(DIMENSIONS AND TOLERANCES-Liaear Dimension-Sheets or Rolls)	-	200	Nil
5.1.2(DIMENSIONS AND TOLERANCES-Liaear Dimension-Tiles)	-	250	Nil
5.2(DIMENSIONS AND TOLERANCES-Thickness)	-	0	Charge already taken in clause no. 5.1.1 (Combined charges)
6. 1(COLOUR AND SURFACE CHARACTERISTICS)	-	250	Nil
7.1-Table 1(iii)(REQUlREMENTS-rile size )	-	0	Charge already taken
7.1-Table 1(iv)(REQUlREMENTS-Dimensional stability )	-	700	Nil
7.1-Table 1(iv)(REQUlREMENTS-Squareness )	-	0	Charge already taken
7.1-Table 1(v)(REQUlREMENTS-Colour fastness to daylight )	-	850	Nil
7.1-Table 1(vi)(REQUlREMENTS-Curling )	-	0	Charge already taken
7.1-Table 1(vii)(REQUlREMENTS-Residual indenration )	-	1400	Nil
7.1-Table 1(viii)(REQUlREMENTS-Flexibility )	-	1500	Nil
7.1-Table 1(ix)(REQUlREMENTS-Resistance to various substances-Scratch width )	-	1100	nil
7.1-Table 1(x)(REQUlREMENTS-Resistance to various substances )	-	0	Charge already taken in clause no. 7.1 (Combined charges)
7.1-Table 1(xi)(REQUlREMENTS-Ply adhesion )	-	1400	Test charges Rs. 1100/- plus Rs. 300/ Specimen charges (25% discount is not applicable in specimen charges)
7.1-Table 1(xii)(REQUlREMENTS-Moisture movernent )	-	700	Nil
7.1-Table 1(xiii)(REQUlREMENTS-Heat ageing and exudation )	-	10100	Test charges Rs. 1100/- plus Rs. 9000/- Conditioning charges (25% discount is not applicable in Conditioning charges)
7.1-Table 1(xiii)(REQUlREMENTS-Elastic product)	-	1350	Test charges Rs. 1100/- plus Rs. 250/ Specimen charges (25% discount is not applicable in specimen charges)

31 Dec, 2026

-
Included w.e.f. 29.06.2017.

10805

BIS, Central Laboratory (CL)

None

IS 4581 (1978)

Specification for phosphorus trichloride, pure and analytical reagent (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Description )	-
3.2, Table 1 and A-2 of IS 4581 (Phosphprus Tricloride ( as PCl3 ) - For Analytical Reagent )	-
3.2, Table 1 and A-2 of IS 4581 (Phosphprus Tricloride ( as PCl3 ) - For Pure grade)	-
3.2, Table 1 and A-3 of IS 4581 (Relative density at 27°C/ 27°C - For all Grade)	-
3.2, Table 1 and A-4 of IS 4581 (Evaporation residue, including PCl5 - For All Grades)	-
3.2, Table 1 and A-5 of IS 4581 (Sulphate ( as SO4) - For Analytical Reagent)	-
3.2, Table 1 and A-6 of IS 4581 (Heavy metals (as Pb), - For Analytical Reagent)	-
3.2, Table 1 and A-7 of IS 4581 (Iron ( as Fe ) - For Analytical Reagent)	-

-
Excluding Clause 4.2 Table 1 (i) Phosphorus trichloride,;

10806

BIS, Eastern Regional Laboratory (ERL)

None

IS 1079 (2017)

Hot rolled carbon steel sheet, plate and strip - Specification (Seventh Revision)

For all grades except tests mentioned in remarks

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 (UTM)	-
Cl 10 (Die Press)	-
Cl 12 (Workmanship)	-
Cl 13 (Length, Width & Thickness)	-
Cl 13 (Length, Width & Thickness)	-
Cl 13 (Length, Width & Thickness)	-
6.1 (Carbon %)	-
6.1 (Manganese %)	-
6.1 (Phosphorus %)	-
6.1 (Sulphur %)	-
6.1 (Silicon %)	-
6.1 ( Copper %)	-
6.1 ( Nitrogen%)	-
Cl 8 (UTM)	-
Cl 9 (Press)	-
6.1 ( Aluminium %)	-
6.1 ( Ti)	-

-
Chem: Facility not available for Microalloying elements and Al To declare Grade

10807

Ace Test Labs & Metrology Pvt. Ltd., Sonipat

9162826

IS 16242 : Part 1 (2014)

Uninterruptible power systems (UPS): Part 1 general and safety requirements for UPS

108000 View breakup
Rs.108000/- (10% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.6(Power interface)	-	3000	10% Discount for BIS
4.7(Marking & instructions)	-	2000	10% Discount for BIS
5.1(Protection against shock and energy hazards)	-	3000	10% Discount for BIS
5.2(Requirement of auxiliary circuits)	-	5000	10% Discount for BIS
5.3(Protective earthing and bonding)	-	5000	10% Discount for BIS
5.5(Over current and earth fault condition)	-	10000	10% Discount for BIS
5.7(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	10000	10% Discount for BIS
6.1(Wiring, connections and supply)	-	5000	10% Discount for BIS
6.3(Wiring terminals for external power conductors)	-	5000	10% Discount for BIS
7.2(STABILITY)	-	5000	10% Discount for BIS
7.3(MECHANICAL STRENGTH)	-	4000	4000 (each )10% Discount for BIS
7.4(Construction details)	-	5000	10% Discount for BIS
7.5(Resistance to fire)	-	8000	8000 (Each)10% Discount for BIS
7.7(Temperature rise)	-	10000	Rs 10000/- for 10 points, 10% Discount for BIS
8.1(General procision for earth leakage)	-	8000	10% Discount for BIS
8.2(Electric Strength)	-	7000	10% Discount for BIS
8.3(Abnormal operating and fault conditions)	-	8000	10% Discount for BIS
9.0(Connection to telecommunication networks)	-	5000	10% Discount for BIS

14 Nov, 2027

-
Only for IP(0-4)(5-6) For UPS/Inverter up to 5KVA), UPS < =10 KVA Excluding: Cl. 4.5/1.5 of RD Components - Cl. 5.6/2.8 of RD Safety Interlocks Cl. 2.10.5.4 & Annex U of RD Semiconductor Devices Cl.2.10.6 PCB material, Cl. 2.10.5.11 Insulation in wound components, CL.7.6 & Annex-M Ventilation of battery Compartment, Annex-L.5 Non linear Loads, Annex-I.5 Solid state backfeed protection Annex-H /Table Protection against Ingress of foreign objects

10808

BIS, Central Laboratory (CL)

None

IS 4505 (2015)

Sodium formaldehyde sulphoxylate - Specification (First Revision)

Please see remarks. View breakup
Testing charges for the product are Rs. 4480/-. Testing Charges for keeping quality: Rs. 4330/-.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl no 4.2 (Description )	-
Cl no 4.3 [ Table 1, Sl no.(i) ] Annex A-2 Grade-1 (Sodium formaldehyde sulphoxylate dihydrate (NaHSO2.CH2O.2H2O))	-
Cl no 4.3 [ Table 1, Sl no.(i) ] Annex A-2 Grade-2 (Sodium formaldehyde sulphoxylate dihydrate (NaHSO2.CH2O.2H2O))	-
Cl no 4.3 [ Table 1, Sl no.(ii) ] Annex A-2 Grade-1 & Grade 2 (Sodium formaldehyde bisulphate (NaHSO3.CH2O.H2O))	-
Cl no 4.3 [ Table 1, Sl no.(iii) ] Annex A-2 Grade-1 & Grade 2 (Sodium sulphite (Na2SO3))	-
Cl no 4.3 [ Table 1, Sl no.(iv) ] Annex A-3 Grade-1 & Grade 2 (pH (of 1 percent solution))	-
Cl no 4.3 [ Table 1, Sl no.(v) ] Annex A-4 Grade-1 (Iron (as Fe))	-
Cl no 4.3 [ Table 1, Sl no.(v) ] Annex A-4 Grade-2 (Iron (as Fe))	-
Cl no 4.3 [ Table 1, Sl no.(vi) ] Ref to IS 12074 Grade-1 & Grade 2 (Lead (as Pb))	-
Cl no 4.3 [ Table 1, Sl no.(vii) ] Annex A-5 Grade-1 & Grade 2 (Copper (as Cu))	-
Cl no 4.3 [ Table 1, Sl no.(viii) ] Annex A-6 Grade-1 (Zinc (as Zn))	-
Cl no 4.3 [ Table 1, Sl no.(viii) ] Annex A-6 Grade-2 (Zinc (as Zn))	-

-
-

10809

BIS, Eastern Regional Laboratory (ERL)

None

IS 1989 : Part 1 (1986)

Specification for leather safety boots and shoes: Part 1 for miners (Fourth Revision)

For all sizes except test mentioned in remarks

Rs 5100/- for safety boots, Rs.4500/- safety shoes View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (a) (Marking)	-
4.1 (b) (Marking)	-
4.1 (c) (Marking)	-
4.1 (d) (Marking)	-
4.1 (e) (Marking)	-
7.1 (Design)	-
10.1 (Finish)	-
10.3 (Finish)	-
10.4 (Finish)	-
11.1 (Mass Boots with Leather Sole and Heel)	-
11.2 (Mass Boots with Rubber Sole and Heel)	-
12 (Performance test)	-
13 (Design)	-
16.1 (Finish)	-
16.2 (Finish)	-
16.3 (Finish)	-
16.4 (Finish)	-
17.1 (Mass Shoes with Leather Sole and Heel)	-
17.2 (Mass Shoes with Rubber Sole and Heel)	-
18 (Performance test)	-

-
Mech- 2 pairs, Except Colour fastness (Cl 7, Cl 14) Chem-2 pairs

10810

BIS, Central Laboratory (CL)

None

IS/IEC 60898 : PART 1 (2015)

Electrical accessories - Circuit - Breakers for overcurrent protection for household and similar installations: Part 1 circuit - Breakers for a.c. operation (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2 (Classification, IS 60898-1)	-
4.3 (Classification, IS 60898-1)	-
4.4 (Classification, IS 60898-1)	-
4.5 (Classification, IS 60898-1)	-
4.5.1 (Classification, IS 60898-1)	-
4.5.2 (Classification, IS 60898-1)	-
4.6 (Classification, IS 60898-1)	-
4.7 (Classification, IS 60898-1)	-
6 (Marking and other product information, IS 60898-1)	-
6 (Marking and other product information, IS 60898-1)	-
6 (Marking and other product information, IS 60898-1)	-
6 (Marking and other product information, IS 60898-1)	-
6 (Marking and other product information, IS 60898-1)	-
6 (Marking and other product information, IS 60898-1)	-
6 (Marking and other product information, IS 60898-1)	-
8.1.1 (General, IS 60898-1)	-
8.1.2 (Mechanism, IS 60898-1)	-
8.1.2 (Mechanism, IS 60898-1)	-
8.1.2 (Mechanism, IS 60898-1)	-
8.1.2 (Mechanism, IS 60898-1)	-
8.1.2 (Mechanism, IS 60898-1)	-
8.1.2 (Mechanism, IS 60898-1)	-
8.1.2 (Mechanism, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.4.1 (Reliability of Screws current carrying parts and connections IS 60898-1)	-
8.1.4.2 (Reliability of Screws current carrying parts and connections IS 60898-1)	-
8.1.4.3 (Reliability of Screws current carrying parts and connections IS 60898-1)	-
8.1.4.4 (Reliability of Screws current carrying parts and connections IS 60898-1)	-
8.1.5.1 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.2 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.3 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.4 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.5 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.6 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.7 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.8 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.9 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.10 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.11 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.12 (Reliability of terminals for external conductors, IS 60898-1)	-
8.2 (Protection against Electric Shock, IS 60898-1)	-
8.3.3 (Isolating capability, IS 60898-1)	-
8.4 (Temperature-rise, IS 60898-1)	-
8.4 (Temperature-rise, IS 60898-1)	-
8.6 (Automatic operation, IS 60898-1)	-
8.1 (Resistance to heat, IS 60898-1)	-
8.11 (Resistance to abnormal heat and to fire, IS 60898-1)	-
8.12 (Resistance to rusting, IS 60898-1)	-
8.13 (Power loss, IS 60898-1)	-
9.3 (Test of indelibility of marking, IS 60898-1)	-
9.4 (Test of reliability of screws, current-carrying parts and connections, IS 60898-1)	-
9.5.1 (Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-
9.5.2 (Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-
9.5.2 (Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-
9.5.3 (Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-
9.5.4 (Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-
9.6 (Test of protection against electric shock, IS 60898-1)	-
9.7.1 (Test of protection against electric shock, IS 60898-1)	-
9.7.2 (Test of protection against electric shock, IS 60898-1)	-
9.7.3 (Test of protection against electric shock, IS 60898-1)	-
9.7.4 (Test of protection against electric shock, IS 60898-1)	-
9.7.5.2 (Test of protection against electric shock, IS 60898-1)	-
9.8 (Test of temperature-rise and measurement of power loss, IS 60898-1)	-
9.8 (Test of temperature-rise and measurement of power loss, IS 60898-1)	-
9.8 (Test of temperature-rise and measurement of power loss, IS 60898-1)	-
9.8.5 (Test of temperature-rise and measurement of power loss, IS 60898-1)	-
9.10.2 (Test of tripping characteristic, IS 60898-1)	-
9.10.3 (Test of tripping characteristic, IS 60898-1)	-
9.10.4 (Test of tripping characteristic, IS 60898-1)	-
9.10.5 (Test of tripping characteristic, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.4.1 (Reliability of Screws current carrying parts and connections IS 60898-1)	-
8.1.4.2 (Reliability of Screws current carrying parts and connections IS 60898-1)	-
8.1.4.3 (Reliability of Screws current carrying parts and connections IS 60898-1)	-
8.1.4.4 (Reliability of Screws current carrying parts and connections IS 60898-1)	-
8.1.5.1 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.2 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.3 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.4 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.5 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.6 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.7 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.8 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.9 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.10 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.11 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.12 (Reliability of terminals for external conductors, IS 60898-1)	-
8.2 (Protection against Electric Shock, IS 60898-1)	-
8.3.3 (Isolating capability, IS 60898-1)	-
8.4 (Temperature-rise, IS 60898-1)	-
8.4 (Temperature-rise, IS 60898-1)	-
8.6 (Automatic operation, IS 60898-1)	-
8.1 (Resistance to heat, IS 60898-1)	-
8.11 (Resistance to abnormal heat and to fire, IS 60898-1)	-
8.12 (Resistance to rusting, IS 60898-1)	-
8.13 (Power loss, IS 60898-1)	-
9.3 (Test of indelibility of marking, IS 60898-1)	-
9.4 (Test of reliability of screws, current-carrying parts and connections, IS 60898-1)	-
9.5.1 (Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-
9.5.2 (Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-
9.5.2 (Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-
9.5.3 (Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-
9.5.4 (Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-
9.6 (Test of protection against electric shock, IS 60898-1)	-
9.7.1 (Test of protection against electric shock, IS 60898-1)	-
9.7.2 (Test of protection against electric shock, IS 60898-1)	-
9.7.3 (Test of protection against electric shock, IS 60898-1)	-
9.7.4 (Test of protection against electric shock, IS 60898-1)	-
9.7.5.2 (Test of protection against electric shock, IS 60898-1)	-
9.8 (Test of temperature-rise and measurement of power loss, IS 60898-1)	-
9.8 (Test of temperature-rise and measurement of power loss, IS 60898-1)	-
9.8 (Test of temperature-rise and measurement of power loss, IS 60898-1)	-
9.8.5 (Test of temperature-rise and measurement of power loss, IS 60898-1)	-
9.10.2 (Test of tripping characteristic, IS 60898-1)	-
9.10.3 (Test of tripping characteristic, IS 60898-1)	-
9.10.4 (Test of tripping characteristic, IS 60898-1)	-
9.10.5 (Test of tripping characteristic, IS 60898-1)	-

-
Excluding 1. 28 days test , 2.Mechanical and Electrical endurance Test, 3. Short circuit test 4. Tripping test at rated voltage, 5. Mechanical shock test, 6. Impact test, 7. Verification of insulation resistance against Impulse Voltage.

10811

BIS, Eastern Regional Laboratory (ERL)

None

IS 362 (1991)

Parliament Hinges -specification

For all types except tests mentioned in remarks

Please see remarks. View breakup
Rs.2250/- and material testing charges as per relevant referred Iss

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 (Type)	-
5.1-able 2 (Dlmenslons for Aluminium Alloy Parliament Hinges-Size)	-
7.1 (FINISH)	-

-
Facility not available for Al,V)

10812

BIS, Southern Regional Laboratory (SRL)

None

IS 1784 (2020)

Screwed Closures for Drums — Specification ( Fourth Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 (Dimensions-Steel flange- d1)	-
6 (Dimensions-Steel flange- d2)	-
6 (Dimensions-Steel flange- d3)	-
6 (Dimensions-Steel flange- d4)	-
6 (Dimensions-Steel flange- s1)	-
6 (Dimensions-Steel flange- t1)	-
6 (Dimensions-Flange Gasket- wd)	-
6 (Dimensions-Flange Gasket-ww)	-
6 (Dimensions-Flange Gasket-wt)	-
6 (Dimensions-Steel Bung- d1)	-
6 (Dimensions-Steel Bung- p1)	-
6 (Dimensions-Steel Bung- p2)	-
6 (Dimensions-Steel Bung- p3)	-
6 (Dimensions-Flange Gasket- wd)	-
6 (Dimensions-Bung Gasket- ww)	-
6 (Dimensions-Bung Gasket- wt)	-
6 (Dimensions-Capseals- d1)	-
6 (Dimensions-Capseals- d2)	-
6 (Dimensions-Capseals- h1)	-
6 (Dimensions-Capseals- h2)	-
6 (Dimensions-Capseals- w1)	-
6 (Dimensions-Tag Ring- d1)	-
6 (Dimensions-Tag Ring- d2)	-
6 (Dimensions-Tag Ring- d3)	-
6 (Dimensions-Tag Ring- d4)	-
6 (Dimensions-Tag Ring- d5)	-
6 (Dimensions-Tag Ring- h1)	-
6 (Dimensions-Zinc Bung- d1)	-
6 (Dimensions-Zinc Bung- d2)	-
6 (Dimensions-Zinc Bung- d3)	-
6 (Dimensions-Zinc Bung- p1)	-
7 (Finish)	-
8.1 (Interchangeability)	-

-
" 6 Nos. Excluding except air pressure test, torque test for steel bungs, curling & thread,chemical tests

10813

BIS, Eastern Regional Laboratory (ERL)

None

IS 10124 : Part 1 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 1 General Requirements (Second Revision)

Rs 1500/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 Table-1 Fig.1 (Dimension of Socket length)	-
6.1 (Opacity test in accordance with IS 12235 (Part 3))	-

-
Facility not available for Effect on water. short term hydraulic test

10814

BIS, Eastern Regional Laboratory (ERL)

None

IS 11513 (2017)

Hot rolled carbon steel strip for cold rolling purposes - Specification (Second Revision)

For all grades except test mentioned in remarks

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 (Workmanship)	-
Cl 9 (Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width )	-
Cl 9 (Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width )	-
Cl 9 (Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width )	-
Cl 9 (Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width )	-
Cl 9 (Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width )	-
6.1 (Carbon %)	-
6.1 (Manganese %)	-
6.1 (Phosphorus %)	-
6.1 (Sulphur %)	-
6.1 (Silicon %)	-
6.1 ( Copper %)	-
6.1 ( Nitrogen%)	-
Cl. 9.5 (Edge Camber)	-

-
Chem: Facility not available for Al,B,Nb,V,Ti) Remarks: Type of killing, elements of killing to be declared

10815

BIS, Southern Regional Laboratory (SRL)

None

IS 6392 (2020)

Steel Pipes Flanges — Specification ( First Revision )

Rs 3070/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (Dimension)	-
7.3 (Joint Faces)	-
3.1 (Tensile Strength-IS 1608(P-1))	-
3.1 (Yield Stress-IS 1608(P-1))	-
3.1 (Elongation- IS 1608(P-1))	-
6.1 (Dimension)	-

-
" 2 no. Excluding except Hydrostatic test facility upto 300mm, chemical tests, Facility for preparation of test specimen not available

10816

BIS, Eastern Regional Laboratory (ERL)

None

IS 5382 (2018)

Rubber seals - Joint rings for water supply, drainage and sewerage pipelines - Specification for materials (Second Revision)

For all hardness clauses

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2.1 (Dimensional tolerances)	-
4.2.2 (i)In zones involved in sealing function)	-
4.2.3 (Hardness, IRHD from buttons )	-
4.2.4 (Tensile strength, MPa)	-
4.2.5 (Compression set in air)	-
4.2.5.2 (Compression set at 23 ºC for 72 h)	-
4.2.5.2 (Compression set at 70 ºC for 24 h)	-
4.2.5.3 (Low temp compression set at -10 ºC for 72 h)	-
4.2.6 (Hardness, IRHD from buttons Tensile strength, % Elongation at break , % )	-
4.2.8 (Volume change in water , max/min 7 days at 70 ºC )	-
4.2.10 (Spliced joint)	-

-
Facility not available for Cl 4.2.7 Stress relaxation in compression (NB: 100 days Stress relaxation test will be carried out on specific request from BO when facility is created), 4.2.9 Ozone resistance 2 rings + 2 slabs of each type of rubber + 9 small buttons of each type of rubber + 3 nos of big buttons of each type of rubber. Refer clause 5.1 for samples to be sent.

10817

BIS, Central Laboratory (CL)

None

IS 17404 (2020)

Electrogalvanized Hot Rolled and Cold Reduced Carbon Steel Sheets and Strips ” Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2)) (C -IS 228)	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2)) (S - IS 228)	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2)) (P - IS 228 )	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2)) (Mn - IS 228)	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2)) (Al - IS 228)	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2)) (Si - IS 228)	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2)) (Cu - IS 228)	-
8.3.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2)) (Yield strength - IS 1608(Pt-1))	-
8.3.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2)) (Tensile Strength - IS 1608(Pt-1))	-
8.3.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2)) (Elongation - IS 1608(Pt-1))	-
10.1 (Coil Internal Diameter-IS17404)	-
10.2 (As per IS 1079, IS 5986, IS 513(pt-1 & 2)) (Width)	-
10.2 (As per IS 1079, IS 5986, IS 513(pt-1 & 2)) (Length)	-
10.2 (As per IS 1079, IS 5986, IS 513(pt-1 & 2)) (Thickness)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm; Excluding Except Coating;

10818

BIS, Central Laboratory (CL)

None

IS 16018 (2012)

Wheeled fire extinguishers - Performance and construction - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 8.4.1.1 (Sulphur)	-
Clause 8.4.1.1 (Phosphorus)	-
Clause 8.4.1.1 (Carbon)	-
Cl 4 (Types of Wheeled Fire Extinguishers)	-
Cl 5.3 (Fill Density)	-
Cl 5.4 (Filling Tolerance)	-
Cl 5.5.1 (Nominal Charge)	-
Cl 6.1 (Operating Temperature)	-
Cl 6.2.1 (Effective Discharge Time)	-
Cl 6.2.2 (Bulk Range)	-
Cl 6.3 (Resistance To Temperature Changes)	-
Cl 6.5 (Intermittent Discharge Test)	-
Cl 7.5.1 (Resistance to Impact)	-
Cl 7.7 (Tapping Test)	-
Cl 7.8 (Intermittent Discharge Test)	-
Cl 9.1 (High Pressure Extinguishers)	-
Cl 9.1.1 (Pressure Cycling Test)	-
Cl 9.2 (Low Pressure Extinguishers)	-
Cl 9.2.5 (Welded Low Carbon Steel Cylinder)	-
Cl 9.2.6 (Stainless Steel Cylinder)	-
Cl 9.2.7 (Aluminium Cylinder)	-
Cl 9.3 (Carrying Handle)	-
Cl 9.4 (Mounting)	-
Cl 9.5 (Caps, Valves and Closures)	-
Cl 9.9 (Hose Assemblies)	-
Cl 9.11 (Safety Locking Devices)	-
Cl 9.13 (Water Based Extinguishers)	-
Cl 9.14 (Special Requirements for CO2 Extinguishers)	-
Cl 10.1 (Colour)	-

-
Excluding -; Resistance to corrosion, Durability test, Electrical conductivity of extinguisher discharge, Leakage test, Performance fire tests, Pressure cycling test.

10819

BIS, Central Laboratory (CL)

None

IS 15962 (2012)

Structural steels for buildings and structures with improved seismic resistance

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clauses 7, 8.1 & .2, Table- 1 (E250S, C)	-
Clauses 7, 8.1 & .2, Table- 1 (E300S, S)	-
Clauses 7, 8.1 & .2, Table- 1 (E250S, P)	-
Clauses 7, 8.1 & .2, Table- 1 (E250S, Mn )	-
Clauses 7, 8.1 & .2, Table- 1 (E250S, Si)	-
Clauses 7, 8.1 & .2, Table- 1 (E250S, CE)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

10820

BIS, Eastern Regional Laboratory (ERL)

None

IS 5986 (2017)

Hot rolled steel sheet, plate and strip for forming and flanging purposes - Specification (Fourth Revision)

For all grades except for the tests mentioned in remarks

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 (UTM)	-
Cl 8 (UTM)	-
Cl 8 (UTM)	-
Cl 9 (Press)	-
Cl 10 (Sudden Load Applied)	-
Cl 13 (Workmanship)	-
Cl 15 (Length, Width & Thickness)	-
Cl 15 (Length, Width & Thickness)	-
7.1 (Carbon %)	-
7.1 (Carbon %)	-
7.1 (Manganese %)	-
7.1 (Phosphorus %)	-
7.1 (Phosphorus %)	-
7.1 (Sulphur %)	-
7.1 (Silicon %)	-
7.1 (Silicon %)	-
7.1 ( Copper %)	-
7.1 ( Nitrogen%)	-
7.1 ( Nitrogen%)	-
7.1 ( Aluminium %)	-
7.1 (CE)	-
7.1 ( Ti)	-

-
facility not available for Hole Expansion ratio, mech: prepared test pc for impact is required, Chem- Complete, except micro-alloy elements & Al,B,Nb,V,Ti

10821

BIS, Eastern Regional Laboratory (ERL)

None

IS 1239 : Part 1 (2004)

Steel tubes, tubulars and other wrought steel fittings - Specification: Part 1 steel tubes (Sixth Revision)

For all designation except tests mentioned in remarks

Rs. 9200/- Excluding test on joints View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 (Outer Diameter, Thickness & Mass)	-
Cl 14 (Tensile Test, Flattening Test & Bend Test)	-
Cl 14 (Tensile Test, Flattening Test & Bend Test)	-
Cl 14 (Tensile Test, Flattening Test & Bend Test)	-
Cl 15 (Workmanship)	-
Cl 14 (Tensile Test, Flattening Test & Bend Test)	-
7, 6.1.1 (CARBON)	-
7, 6.1.1 (SULPHUR)	-
7, 6.1.1 (PHOSPHURS)	-
7, 6.1.1 (MANGANESE)	-

-
Mech: Except Hydrostatic test and thread Chem: except Al,B,Nb,V,Ti,Ca 1m x1 No ( plus another 1.8 m pc for bend test up to 50 mm NB) + 50 g drilling + 4 pcsx10 cm

10822

BIS, Central Laboratory (CL)

None

IS 15660 (2017)

Refillable transportable seamless aluminium alloy gas cylinders - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1.1,5.2.1,5.2.2, Table-1 (Silicon)	-
5.1.1,5.2.1,5.2.2, Table-1 ( Iron)	-
5.1.1,5.2.1,5.2.2, Table-1 (Copper)	-
5.1.1,5.2.1,5.2.2, Table-1 ( Manganese)	-
5.1.1,5.2.1,5.2.2, Table-1 ( Manesium)	-
5.1.1,5.2.1,5.2.2, Table-1 (Chromium)	-
5.1.1,5.2.1,5.2.2, Table-1 ( Nickel)	-
5.1.1,5.2.1,5.2.2, Table-1 ( Zinc)	-
5.1.1,5.2.1,5.2.2, Table-1 ( Titanium)	-
5.1.1,5.2.1,5.2.2, Table-1 ( Zirconium)	-
5.1.1,5.2.1,5.2.2, Table-1 ( Lead)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm; Excluding Except magnesium, maganese, Zinc;

10823

BIS, Southern Regional Laboratory (SRL)

None

IS 1536 (2001)

Centrifugally cast (Spun) iron pressure pipes for water, gas and sewage - Specification (Fourth Revision)

Rs.4500.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
11.2, annex-A (Tensile Test ( for pipes over 300mm))	-
11.3 (Brinell Hardness Test)	-
13.4 Table 5 (c)	-
13.4 Table 5 (D)	-
13.4 Table 5 (E)	-
13.4 Table 5 (b)	-
13.4 Table 5 (a)	-
13.4 Table 5 (r)	-
13.4 Table 5 (f)	-
13.4 Table 5 (s)	-
13.4 Table 5 (Holes Number)	-
13.4 Table 5 (Holes Diameter)	-
13.4 Table 5 (Diameter of Bolts)	-
13.5 Table 6 to 8 (DE Lead joint)	-
13.5 Table 6 to 8 (DE Push on joint)	-
13.5 Table 6 to 8 (e)	-
13.6 Table 9 (DE)	-
13.6 Table 9 (e)	-

-
" 1 no+ 2test bar Excluding "Excl. Ring test, Hydrostatic test, chemical tests, and Permissible deviation from a stright line Prepared Test piece needed for Tensile test"

10824

BIS, Central Laboratory (CL)

None

IS 9537 : Part 3 (1983)

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials

Rs. 3300.00/, Rs. 2850.00/ View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (Marking)	-
6.3 (Standard Mark on Conduit)	-
6.2 (Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-
7.1.1 (Maximum and minimum outside diameter of socket)	-
7.1.2 (Maximum and minimum outside diameter of conduit)	-
7.2 (Minimum inside diameter of conduit)	-
7.3 (Length of conduit)	-
7.4 (Unifomity of The wall Thickness)	-
8.1 (Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-
9.2 (Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-
9.3 (Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-
9.4 (Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-
9.5 (Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-
10 (Resistance to Heat -Ball presure test)	-
11 (Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-
12 (Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-
12 (Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-
7.1.1 (Maximum and minimum outside diameter of socket)	-

-
-

10825

BIS, Central Laboratory (CL)

None

IS 15542 (2005)

Power - Operated chaff cutter - Safety requirements

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.4.1, Table-1 (Carbon)	-
Cl.4.1, Table-1 (Sulphur)	-
Cl.4.1, Table-1 (Phosphorus)	-
Cl.4.1, Table-1 (Manganese)	-
Cl.4.1, Table-1 (Nitrogen)	-

-
-

10826

BIS, Central Laboratory (CL)

None

IS 15490 (2017)

Seamless steel cylinders for on - Board storage of compressed natural gas as a fuel for automotive vehicles - Specification (First Revision)

16297 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.2.1,5.2.2,5.3 (Carbon)	-
5.2.1,5.2.2,5.3 (Sulphur)	-
5.2.1,5.2.2,5.3 (Phosphorus)	-
5.2.1,5.2.2,5.3 (Manganese)	-
5.2.1,5.2.2,5.3 (Silicon)	-
5.2.1,5.2.2,5.3 (Chromium)	-
5.2.1,5.2.2,5.3 (Nickle )	-
5.2.1,5.2.2,5.3 (molybdenum)	-
5.2.1,5.2.2,5.3 (Sulphur and phosphorus)	-
7.3, Annex-A (Surface defects)	-

-
Excluding "-; Cylinder neck threads Cl 7.5 Out-of-roundness (Cl 7.6) Mean diameter Cl 7.7, Bonfire test (Cl 9.2.7),Sulphide Stress Cracking Resistance Test (Cl 9.3.4) , Pressure Cycling Test (Cl 10.2 & 9.2.3) , Hydraulic Burst Test (Cl 10.2, 9.2.3 & 9.2.4) , Hydrostatic Stretch Test (Cl 11.2) , Leakage test (Cl 11.4)"

10827

BIS, Central Laboratory (CL)

None

IS 15103 (2002)

Fire resistant steel - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clauses 6 & 7.1, Table- 1 (FR- Fe 410, C)	-
Clauses 6 & 7.1, Table- 1 (FR- Fe 410, Si)	-
Clauses 6 & 7.1, Table- 1 (FR- Fe 410, Mn)	-
Clauses 6 & 7.1, Table- 1 (FR- Fe 410, P)	-
Clauses 6 & 7.1, Table- 1 (FR- Fe 410, S)	-
Clauses 6 & 7.1, Table- 1 (FR- Fe 410, Cr)	-
Clauses 6 & 7.1, Table- 1 (FR- Fe 410, Mo)	-
Cl 10 (Tensile Test)	-
Cl 11 (Bend Test)	-
Cl 12 (Impact Test)	-
Cl 13 (Freedom from Defects)	-
Cl 14 (Dimensions & Tolerances)	-

-
-

10828

BIS, Central Laboratory (CL)

None

IS 14756 (2017)

Stainless steel cookware - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 & Table 1 of IS 5522 (Carbon)	-
3.1 & Table 1 of IS 5522 (Silicon)	-
3.1 & Table 1 of IS 5522 (Manganese)	-
3.1 & Table 1 of IS 5522 (Nickel)	-
3.1 & Table 1 of IS 5522 (Chromium)	-
3.1 & Table 1 of IS 5522 (Sulphur)	-
3.1 & Table 1 of IS 5522 (Phosphorus)	-
3.1 & Table 1 of IS 5522 (Copper)	-
3.1 & Table 1 of IS 5522 (Nitrogen)	-
3.1 & Table 1 of IS 5522 (Carbon)	-
3.1 & Table 1 of IS 5522 (Carbon)	-
3.1 & Table 1 of IS 5522 (Silicon)	-
3.1 & Table 1 of IS 5522 (Manganese)	-
3.1 & Table 1 of IS 5522 (Nickel)	-
3.1 & Table 1 of IS 5522 (Chromium)	-
3.1 & Table 1 of IS 5522 (Sulphur)	-
3.1 & Table 1 of IS 5522 (Phosphorus)	-
3.1 & Table 1 of IS 5522 (Copper)	-
3.1 & Table 1 of IS 5522 (Nitrogen)	-
3.1 & Table 1 of IS 5522 (Carbon)	-
3.1 & Table 1 of IS 5522 (Carbon)	-
3.1 & Table 1 of IS 5522 (Silicon)	-
3.1 & Table 1 of IS 5522 (Manganese)	-
3.1 & Table 1 of IS 5522 (Nickel)	-
3.1 & Table 1 of IS 5522 (Chromium)	-
3.1 & Table 1 of IS 5522 (Sulphur)	-
3.1 & Table 1 of IS 5522 (Phosphorus)	-
3.1 & Table 1 of IS 5522 (Copper)	-
3.1 & Table 1 of IS 5522 (Nitrogen)	-
3.1 & Table 1 of IS 5522 (Carbon)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

10829

BIS, Central Laboratory (CL)

None

IS 14652 (1999)

18 percent nickel maraging steel bars and rods - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 Table 1 (Carbon-Method mutually agreed between supplier & purchaser)	-
4.1 Table 1 (Sulphur-Method mutually agreed between supplier & purchaser)	-
4.1 Table 1 (Phosphorous-Method mutually agreed between supplier & purchaser)	-
4.1 Table 1 (Manganese-Method mutually agreed between supplier & purchaser)	-
4.1 Table 1 (Silicon-Method mutually agreed between supplier & purchaser)	-
4.1 Table 1 (Chromium-Method mutually agreed between supplier & purchaser)	-
4.1 Table 1 (Copper-Method mutually agreed between supplier & purchaser)	-
4.1 Table 1 (Nickel-Method mutually agreed between supplier & purchaser)	-
4.1 Table 1 (Cobalt-Method mutually agreed between supplier & purchaser)	-
4.1 Table 1 (Molybdenum-Method mutually agreed between supplier & purchaser)	-
4.1 Table 1 (Titanium-Method mutually agreed between supplier & purchaser)	-
4.1 Table 1 (Aluminium-Method mutually agreed between supplier & purchaser)	-
4.1 Table 1 (Iron-Method mutually agreed between supplier & purchaser)	-

-
-

10830

BIS, Central Laboratory (CL)

None

IS 14650 (1999)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling purposes - Specificaation

Rs. 450/- (only for dimensions and marking). View breakup
Rs. 450/- (only for dimensions and marking).

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 (Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6 (Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6 (Silicon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6 (Nitrogen- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6 (Aluminium- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number