BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15361 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

12151

Winwall Technology India Private Limited,Thiruvallur

6171906

IS 17346 (2020)

Insulating Glazing Unit ” Specification

Insulating Glazing Unit

275752 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.2(Thickness test)	Inert gas level test (Optional test) as per Cl.5.2.3	5124	Testing Charges for Thickness Test
5.1.1(Dimension and Squarenes test)	Inert gas level test (Optional test) as per Cl.5.2.3	5011	Combined Testing Charges for Dimension and Squareness
7.4.1(Dew /frost point measurement)	Inert gas level test (Optional test) as per Cl.5.2.3	9998	-
5.2.2(Climate test)	Inert gas level test (Optional test) as per Cl.5.2.3	160000	-
5.1.3(Displacement test)	Inert gas level test (Optional test) as per Cl.5.2.3	5149	-
5.1.4(Sealant protrusion test)	Inert gas level test (Optional test) as per Cl.5.2.3	5149	-
5.1.5(Bite size test)	Inert gas level test (Optional test) as per Cl.5.2.3	5149	-
5.2.4(Edge strength test)	Inert gas level test (Optional test) as per Cl.5.2.3	80172	-

10 Apr, 2029

-
Exclusion: Inert Gas Level test as per Cl. 5.2.3 (Optional Test)

12152

Winwall Technology India Private Limited,Thiruvallur

6171906

IS 16982 (2018)

Heat strengthened glass - Specification

Heat Strengthened Glass

82765 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3(Thickness test)	-	5214	Testing Charges for Thickness Measurement
4.4(Dimension and Squarenes test)	-	5011	Combined Testing Charges for Dimension and Squareness
4.7(Overall Bow)	-	6423	Combined Testing Charges for Flatness test
4.7(measurement of wave and roller wave)	-	6423	Combined Testing Charges for Flatness test
4.7(Edge lift test)	-	6423	Combined Testing Charges for Flatness test
4.7(Local distortion test)	-	6423	Combined Testing Charges for Flatness test
4.5(Fragmentation test)	-	6271	Testing Charges for Fragmentation Test
4.6(Four point bending test)	-	9998	Testing Charges for Four point Bending Test
4.5(Surface compression)	-	6423	Testing Charges for Surface Compression Test

10 Apr, 2029

-
-

12153

BIS, Northern Regional Laboratory (NRL)

None

IS/ISO 3183 (2012)

Petroleum and Natural Gas Industries â€” Steel Pipe for Pipeline Transportation Systems ( First Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

-
Excluding HST, Impact test, Microalloying Elements

12154

Amit Test and Calibration Centre (8172006)

8172006

IS 15652 (2006)

Insulating mats for electrical purposes - Specification

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9(Marking (As per Cl.9.1 of IS 15652 : 2006))	-	1000	-
9(Marking (As per Cl.9.1 of IS 15652 : 2006))	-	1000	-
9(Marking (As per Cl.9.1 of IS 15652 : 2006))	-	1000	-
9(Marking (As per Cl.9.1 of IS 15652 : 2006))	-	1000	-
9(Marking (As per Cl.9.1 of IS 15652 : 2006))	-	1000	-
9(Marking (As per Cl.9.2 of IS 15652 : 2006))	-	1000	-
10.a)(Packing)	-	1000	-
10.b)(Packing)	-	1000	-
10.c)(Packing)	-	1000	-
4(Classification and Designation (As per Cl.4.1 and Table-1 of IS 15652 : 2006))	-	1000	-
4(Classification and Designation (As per Cl.4.1 and Table-1 of IS 15652 : 2006))	-	1000	-
4(Classification and Designation (As per Cl.4.1 and Table-1 of IS 15652 : 2006))	-	1000	-
4(Classification and Designation (As per Cl.4.2 of IS 15652 : 2006))	-	1000	-
4(Classification and Designation (As per Cl.4.2 of IS 15652 : 2006))	-	1000	-
4(Classification and Designation (As per Cl.4.2 of IS 15652 : 2006))	-	1000	-
4(Classification and Designation (As per Cl.4.2 of IS 15652 : 2006))	-	1000	-
5(Composition (As per Cl. 5.1 of IS 15652 : 2006))	-	1000	-
5(Composition (As per Cl. 5.2 of IS 15652 : 2006))	-	1000	-
6(Shape Requirements and Dimension (As per Cl.6.1 & 6.2 of IS 15652 : 2006))	-	2000	-
6(Shape Requirements and Dimension (As per Cl.6.1 & 6.2 of IS 15652 : 2006))	-	2000	-
6(Thickness [mm] (As per Cl. 6.3 and Table-2 of IS 15652 : 2006))	-	2000	-
6(Thickness [mm] (As per Cl. 6.3 and Table-2 of IS 15652 : 2006))	-	2000	-
6(Thickness [mm] (As per Cl. 6.3 and Table-2 of IS 15652 : 2006))	-	2000	-
6(Colour (As per Cl. 6.4 of IS 15652 : 2006))	-	1000	-
7(Workmanship & Finish (As per Cl. 7.1 of IS 15652 : 2006))	-	1000	-
8(Physical properties (As per Cl.8.1 and Table - 3 of IS 15652 : 2006))	-	5000	-
8(Physical properties (As per Cl.8.1 and Table - 3 of IS 15652 : 2006))	-	5000	-
8(Physical properties (As per Cl.8.3 of IS 15652 : 2006))	-	5000	-
8(Physical properties (As per Cl.8.3 of IS 15652 : 2006))	-	5000	-
8(Physical properties (As per Cl.8.5 of IS 15652 : 2006))	-	5000	-
8(Physical properties (As per Cl.8.5 of IS 15652 : 2006))	-	5000	-
8(Physical properties (As per Cl.8.5 of IS 15652 : 2006))	-	5000	-
8(Physical properties (As per Cl.8.5 of IS 15652 : 2006))	-	5000	-
8(Physical properties (As per Cl.8.5 of IS 15652 : 2006))	-	5000	-
8(Physical properties (As per Cl.8.5 of IS 15652 : 2006))	-	5000	-
8(Physical properties (As per Cl.8.5 of IS 15652 : 2006))	-	5000	-
8(Di-electric Properties (As per Cl.8.2.1 and C-3.1 of IS 15652 : 2006))	-	5000	-
8(Di-electric Properties (As per Cl.8.2.2 and C-3.2 of IS 15652 : 2006))	-	5000	-
8(Di-electric Properties (As per Cl.8.2.3 and C-3.3 of IS 15652 : 2006))	-	5000	-
8(Di-electric Properties (As per Cl.8.2.3 and Table-4 of IS 15652 : 2006))	-	5000	-
8(Di-electric Properties (As per Cl.8.2.3 and Table-4 of IS 15652 : 2006))	-	5000	-
8(Di-electric Properties (Cl.8.2), A.C. Proof Voltage (Cl.8.2.4), C-3.4 and Table-5 of IS 15652 : 2006))	-	5000	-
8(A.C. Proof Voltage (Cl.8.2.4), C-3.4 and Table-5 of IS 15652 : 2006))	-	5000	-
8(A.C. Proof Voltage (Cl.8.2.4), C-3.4 and Table-5 of IS 15652 : 2006))	-	5000	-
8(Thermal Properties (Cl..8.4))	-	5000	-
8(Thermal Properties (Cl..8.4))	-	5000	-
8(Extreme Low Temperature (Cl.8.6))	-	5000	-

-
-

12155

TECHVISION TESTING LAB PRIVATE LIMITED

9173226

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.5(Components)	-	1000	-
1.6(Power interface .)	-	2000	-
1.7(Markings and instructions)	-	300	-
2.1(Protection from electric shock and energy hazards)	-	1000	-
2.2(SELV circuits)	-	1000	-
2.3(TNV circuits)	-	1000	-
2.4(Limited current circuits)	-	1000	-
2.5(Limited power sources .)	-	1000	-
2.9(Electrical insulation)	-	1000	-
2.10(Clearances, creepage distances and distances through insulation)	-	2000	-
3.1(General)	-	500	-
3.2(Connection to a mains supply)	-	500	-
3.3(Wiring terminals for connection of external conductors)	-	500	-
3.4(Disconnection from the mains supply)	-	500	-
3.5(Interconnection of equipment)	-	500	-
4.1(Stability)	-	500	-
4.2(Mechanical strength)	-	1000	-
4.3(Design and construction)	-	1000	-
4.4(Protection against hazardous moving parts)	-	500	-
4.5(Thermal requirements)	-	2000	-
4.6(Openings in enclosures)	-	500	-
4.7(Resistance to fire)	-	1500	-
5.1(Touch current and protective conductor curren)	-	1000	-
5.2(Electric strength)	-	500	-
5.3(Abnormal operating and fault conditions)	-	500	-
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	200	-
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	200	-
6.3(Protection of the telecommunication wiring system from overheating)	-	200	-
7.1(General)	-	200	-
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	200	-
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	200	-
7.4(Insulation between primary circuits and cable distribution systems)	-	200	-
2.8.2/2.8.5(Interlock switches)	-	500	-
2.8.7(Switches and Relay)	-	500	-
2.10.4.2(Material Group and Comparative Tracking Index)	-	500	-
2.10.5.3(Insulating Compound as Solid Insulation)	-	500	-
2.10.5.4(Opto-coupler)	-	200	-
2.10.5.6(Thin sheet materials)	-	500	-
2.10.5.11(SMPS Transformer and Inductor)	-	500	-
2.10.12(Enclosed and sealed parts)	-	500	-
2.10.5.13(Winding wire)	-	500	-
3.1.4(Internal wire)	-	500	-
2.10.5.14(Additional insulation in wound components)	-	500	-
2.10.6(PCB material)	-	500	-
2.10.8.2(Thermal conditioning (thermal ageing))	-	500	-
2.10.8.4(Abrasion resistance test)	-	500	-
2.10.9(Thermal Cycling)	-	500	-
2.10.10(Test for Pollution Degree 1 environment and for insulating compound)	-	500	-
2.10.11(Tests for semiconductor devices and for cemented joints)	-	500	-
3.2.4(Appliance inlet /connector)	-	200	-
3.2.5(Non re-wirable plug with PVC sheathed cable)	-	200	-
4.2.8(Cathode Ray Tubes)	-	200	-
4.3.8(Batteries)	-	500	-
4.3.10(Dust, powders, liquids and gases)	-	500	-
4.3.11(Containers for liquids or gases)	-	500	-
4.3.12(Flammable liquids)	-	500	-
4.3.13.2(Ionizing radiation)	-	500	-
4.3.13.3/ Annex Y(Effect of UV radiation on material/Ultraviolet conditioning test)	-	500	-
4.3.13.4(Human exposure to ultraviolet (UV) radiation)	-	500	-
4.3.13.5(LED, laser class)	-	500	-
Annex A3(Hot flaming oil test)	-	0	-
Annex CC(Evaluation of integrated circuit (IC) current limiters)	-	500	-
Annex U(Insulating winding wires for use without interleaved insulation)	-	500	-
Annex K(Thermal Control)	-	500	-
Annex Q(Voltage Dependent Resistors)	-	500	-
Annex B(Motor tests under abnormal conditions)	-	500	-
Annex C(Transformers)	-	500	-
Annex DD(Requirements for the mounting means of a rack mounted equipment)	-	500	-
Annex EE(Household and home/ office document/ media shredders)	-	500	-
4.6.2(Bottoms of fire enclosures)	-	500	-
2.6(Provisions for earthing and bonding)	-	500	-
2.7(Overcurrent and earth fault protection in primary circuits)	-	500	-
2.8(Safety interlocks)	-	500	-

16 Jul, 2029

-
Exclusion: Cl. 2.8.7 (Switches and Relay), Cl. 4.2.8 (Cathode Ray Tubes), Cl. 4.3.13.2 (Ionizing radiation), Cl. 4.3.13.3/ Annex Y (Effect of UV radiation on material/Ultraviolet conditioning test), Cl. 4.3.13.4 (Human exposure to ultraviolet (UV) radiation), Cl. 4.3.13.5 (LED, laser class), Annex CC (Evaluation of integrated circuit (IC) current limiters)

12156

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 383 (2016)

Coarse and Fine Aggregate for Concrete - Specification (Third Revision)

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4.1 (a)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	600	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
5.4.1 (b)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	600	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
5.4.2(a)( Aggregates Impact Value)	-	600	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
5.4.2(b)( Aggregates Impact Value)	-	600	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
5.4.3(a)( Aggregate Abrasion Value)	-	400	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
5.4.3(b)( Aggregate Abrasion Value)	-	400	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.1-Table 7(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Nominal Size of aggregate)	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.1-Table 7(i)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 80 mm sieve )	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.1-Table 7(ii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 63 mm sieve )	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.1-Table 7(iii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 40 mm sieve )	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.1-Table 7(iv)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 20 mm sieve )	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.1-Table 7(v)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 16 mm sieve )	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.1-Table 7(vi)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 12.5 mm sieve )	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.1-Table 7(vii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 10 mm sieve )	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.1-Table 7(viii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 4.75 mm sieve )	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.1-Table 7(ix)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 2.36 mm sieve )	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.1.1-Table 8(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Class)	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.1.1-Table 8(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Size)	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.1.1-Table 8(i)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 160 mm Sieve)	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.1.1-Table 8(i)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 80 mm Sieve)	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.1.1-Table 8(ii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 80 mm Sieve)	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.1.1-Table 8(ii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 40 mm Sieve)	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.1.1-Table 8(iii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 40 mm Sieve)	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.1.1-Table 8(iii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 20 mm Sieve)	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 20 mm Sieve)	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 4.75 mm Sieve)	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 2.36 mm Sieve)	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.3-Table 9(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Grading Zone)	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.3-Table 9(i)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 10mm Sieve )	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.3-Table 9(ii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 4.75mm Sieve )	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.3-Table 9(iii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 2.36mm Sieve )	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.3-Table 9(iv)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 1.18mm Sieve )	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.3-Table 9(v)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 600µm Sieve )	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.3-Table 9(vi)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 300µm Sieve )	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.3-Table 9(vii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 150µm Sieve )	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.4-Table 10(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Nominal Size )	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.4-Table 10(i)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 80mm Sieve )	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.4-Table 10(ii)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 40mm Sieve )	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.4-Table 10(iii)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 20mm Sieve )	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.4-Table 10(iv)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 4.75mm Sieve )	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.4-Table 10(v)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 600µm Sieve )	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.4-Table 10(vi)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 150µm Sieve )	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
5.7-Table-3-(III) IS:14959 (P-2)(Water soluble chloride content (fine aggregate))	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
5.7-Table-3-(II) IS:4032(Total sulphate content (fine aggregate))	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
Clause 5.7- Table 3 (i) (TotalAlkali content as Na2O equivalent )	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
5.5-IS: 2386 (P-5)(Soundness (fine aggregate))	-	2000	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
5.6-IS: 2386 (P-7)(Alkali Aggregate Reaction (fine aggregate))	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
Clause 5.6(Dissolved Silica)	-	250	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
Clause 5.6(Reduction in Alkalinity)	-	250	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
5.5-IS: 2386 (P-5)(Soundness (coarse aggregate))	-	2000	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-

31 Dec, 2026

-
-

12157

ADARSH SCIENTIFIC RESEARCH CENTER AND TESTING LABORATORY PVT. LTD., PANVEL

7175806

IS 10500 (2012)

Drinking water - Specification (Second Revision)

Drinking Water

15000 View breakup
+ GST

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4. SL No.i)of Table I(Colour)	-	100	-
4.SL No.ii) of Table I(Odour)	-	100	-
4.SL No.iii)of Table I(pH)	-	200	-
4.SL No.v)of Table I(Turbidity, NTU, Max)	-	200	-
4.SL No.vi)of Table I(Total dissolved solids, mg/l, max)	-	500	-
table 2 sl.no 1( Aluminium (as Al), mg/l, Max)	-	250	-
table 2 sl.no 2(Ammonia (as total ammonia-N), mg/l, Max)	-	250	-
table 2 sl.no 3(Anionic detergents (as MBAS), mg/l, Max)	-	200	-
table 2 sl.no 4(Barium (as Ba), mg/l, Max)	-	250	-
table 2 sl.no 5(Boron (as B), mg/l, Max)	-	200	-
table 2 sl.no 6(Calcium (as Ca), mg/l, Max)	-	200	-
4, Table 2, Sr. no. vii(Chloramines)	-	250	-
4, Table 2, Sr.no. viii(Chloride)	-	200	-
table 2 sl.no 9(Copper (as Cu), mg/l, Max)	-	250	-
table 2 sl.no 10( Fluoride (as F) mg/l, Max)	-	200	-
table 2 sl.no 11(Free residual chlorine, mg/l, Min)	-	200	-
table 2 sl.no 12(Iron (as Fe), mg/l, Max)	-	250	-
table 2 sl.no 13(Magnesium (as Mg), mg/l, Max)	-	300	-
table 2 sl.no 14(Manganese (as Mn), mg/l, Max)	-	300	-
table 2 sl.no 15(Mineral oil, mg/l, Max)	-	300	-
table 2 sl.no 16(Nitrate (as NO3), mg/l, Max)	-	150	-
table 2 sl.no 17(Phenolic compounds (as C6H5OH), mg/l, Max)	-	300	-
table 2 sl.no 18(Selenium (as Se), mg/l, Ma)	-	200	-
table 2 sl.no 19(Silver (as Ag), mg/l, Max)	-	300	-
table 2 sl.no 20(Sulphate (as SO4) mg/l, Max)	-	350	-
table 2 sl.no 21(Sulphide (as H2S), mg/l, Max)	-	250	-
table 2 sl.no 22(Total alkalinity as calcium carbonate, mg/l, Max)	-	300	-
table 2 sl.no 23(Total hardness (as CaCO3 mg/l, Max)	-	250	-
table 2 sl.no 24(Zinc (as Zn), mg/l, Max)	-	200	-
TABLE 3 sl no 1(Cadmium (as Cd), mg/l, Max)	-	200	-
TABLE 3 sl no 2(Cyanide (as CN), mg/l, Max)	-	200	-
TABLE 3 sl no 3(Lead (as Pb), mg/l, Max)	-	250	-
TABLE 3 sl no 4(Mercury (as Hg), mg/l, Max)	-	250	-
TABLE 3 sl no 5( Molybdenum (as Mo), mg/l, Max)	-	250	-
TABLE 3 sl no 6(Nickel (as Ni), mg/l, Max)	-	250	-
TABLE 3 sl no 8(Polychlorinated biphenyls, mg/l,)	-	250	-
TABLE 3 sl no 9(Polynuclear aromatic hydro-carbons (as PAH), mg/l, Max)	-	200	-
TABLE 3 sl no 10(Total arsenic (as As), mg/l, Max)	-	200	-
TABLE 3 sl no 11(Total chromium (as Cr), mg/l, Max)	-	200	-
TABLE 3 sl no 12(Bromoform, mg/l, Max)	-	200	-
TABLE 3 sl no 13(Dibromochloromethane,)	-	250	-
Table 3 (Clause 4)xii) Trihalomethanes: (b)(Bromodichloromethane)	-	250	-
TABLE 3 sl no 15(Chloroform, mg/l, Max)	-	300	-
TABLE 5 sl no 1(Alachlor)	-	300	-
TABLE 5 sl no 2(Atrazine)	-	200	-
Table 5(Aldrin and Dieldrin )	-	400	-
TABLE 5 sl no 4( Alpha HCH)	-	300	-
TABLE 5 sl no 5(Beta HCH)	-	250	-
TABLE 5 sl no 6(Butachlor)	-	200	-
TABLE 5 sl no 7(Chlorpyriphos)	-	300	-
TABLE 5 sl no 8(Delta HCH)	-	200	-
TABLE 5 sl no 9(2,4- Dichlorophenoxyacetic acid)	-	150	-
TABLE 5 sl no 10( DDT (o, p and p, p – Isomers of DDT, DDE and DDD))	-	200	-
TABLE 5 sl no 11(Endosulfan (alpha, beta, and sulphate))	-	600	-
TABLE 5 sl no 12( Ethion)	-	200	-
TABLE 5 sl no 13(Gamma — HCH (Lindane))	-	200	-
TABLE 5 sl no 14( Isoproturon)	-	200	-
TABLE 5 sl no 15(Malathion)	-	200	-
TABLE 5 sl no 16(Methyl parathion)	-	250	-
TABLE 5 sl no 17(Monocrotophos)	-	200	-
TABLE 5 sl no 18(Phorate)	-	100	-
TABLE 6 sl no 1(All water intended for drinking: a) E. coli or thermotolerant coliform bacteri)	-	500	-
TABLE 6 sl no 3(b) Total coliform bacteria)	-	200	-
Table 3, x)(Uranium)	-	200	-
Table 1 clause(iv)(Taste)	-	100	-

14 Jan, 2027

-
Exclusion: MS2 phage (Cl.4.2.7), Alpha Emitters (Cl.4, Table 4, I, a), Beta Emitters (4, table 4, I, b), Giardia (Cl.4.3.9), Cryptosporidium (Cl.4.3.8)

12158

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 10124 : Part 13 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 13 Specific Requirements for 11Â¼oBends PART 12 SPECIFIC REQUIREMENTS FOR 22 Â½o BENDS

9500 View breakup
-

Clause No.	Exclusion	Remark
3.2.2, Table 2(Dimension of 11 1/4° bends for Elastomeric sealing ring joint)	-	Combined Testing Charges for Dimensions are Rs. 2000/- mentioned below.
3.2.2, Table 1(Dimension of 11 1/4° bends)	-	Combined Testing Charges for Dimensions are Rs. 2000/- mentioned below.
3.2.3(Socket, Measurement)	-	Combined Testing Charges for Dimensions are Rs. 2000/- mentioned below.

31 Dec, 2026

-
Included w.e.f. 13.10.2023.

12159

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 10124 : Part 12 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 12 specific requirements for 22½ degree bends (Second Revision)

9500 View breakup
-

Clause No.	Exclusion	Remark
3.2.2, Table 1(Dimensions of 22 ½ deg Bends)	-	Combined Testing Charges for Dimensions are Rs. 2000/- mentioned below.
3.2.2, Table 2(Dimensions of 22 ½ deg Bend for Elastomeric Sealing Ring Joint)	-	Combined Testing Charges for Dimensions are Rs. 2000/- mentioned below.
3.2.3(Socket, measurements)	-	Combined Testing Charges for Dimensions are Rs. 2000/- mentioned below.

31 Dec, 2026

-
Included w.e.f. 13.10.2023.

12160

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 10124 : Part 11 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 11 specific requirements for 40 degree bends (Second Revision)

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2.2, Table 1(Dimensions of 30 deg Bends)	-	0		Combined Testing Charges for Dimensions are Rs. 2000/- mentioned below.

31 Dec, 2026

-
Included w.e.f. 13.10.2023.

12161

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 14735 (1999)

Unplasticized Polyvinyl Chloride (UPVC) Injection Moulded Fittings for Soil and Waste Discharge System for Inside and Outside Buildings Including Ventilation and Rain Water System -

40 MM TO 160 MM

14650.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Colour of fittings)	-	500.00	-
7.1,Table 1(Wall thickness)	-	500.00	-
8(Sealing Rings)	-	500.00	-
10(Workmanship)	-	500.00	-
11.1(Solvent cement type or Rubber ring type)	-	500.00	-
12.1(Visual appearance)	-	500.00	-
12.2(Stress relief test)	-	700.00	-
12.3(Vicat softening tempewrature)	-	1100.00	-
Cl.13, IS 12235 (P-7)-2004, (Resistance to Sulphuric Acid)	-	2500.00	Testing Charge- 2000.00 SPECIMEN CONDIONING CHARGE- 500.00
Cl.15, Annex B(Sulphated Ash Content)	-	1200.00	-
16.1(Impact test)	-	1100.00	-
17(Watet tightness of joint)	-	850.00	-
12.4(Effect on water test)	-	3000.00	-
7.2 ,Table 2&3(Socket Dimensions)	-	500.00	All Dimension have single Charge.
7.3(Dimensions of waste trap(Nahani Trap)	-	0.00	All Dimension have single Charge.
7.4(Chamfer)	-	0.00	All Dimension have single Charge.
11.4,Table 5(Vent cowl)	-	0.00	All Dimension have single Charge.
11.5,Table 6(Pipe Clips)	-	0.00	All Dimension have single Charge.
19(Marking)	-	0.00	-
3(Type of Fitting)	-	0.00	-
4(Size Designation)	-	0.00	-
11(Design requirements)	-	0.00	-
11.2(Socket and spigot configeration)	-	0.00	-
12(Physical test requirements)	-	0.00	-
Cl.14, Annex A(Titanium Di-Oxide Content)	-	0.00	TEST CHARGES FOR ABOVE PRAMETER ALEADY TAKEN.
16(Mechanical Properties)	-	0.00	-
11.3(Access Openings)	-	0.00	TEST CHARGES FOR ABOVE PRAMETER ALEADY TAKEN.
Table 4(Dimension of Access Openings)	-	0.00	TEST CHARGES FOR ABOVE PRAMETER ALEADY TAKEN.

24 Apr, 2027

-
-

12162

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 15532 (2004)

Plastics crates for fruits and vegetables - Specification

15200.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Material)	-	6300.0	1. MATERIAL IDENTIFICATION - 2000.00 2. COLOUR- 500.00 3. PRESENCE OF UV STABLIZER - 2000.00 4. MFI- 1100.00 5. DENSITY - 700.00
3.3(Shape, Dimensions and Design)	-	500.00	-
3.4(Mass)	-	500.00	-
3.5(Appearance and Surface Finish)	-	500.00	-
3.6(Dimensional Stability)	-	700.00	-
3.7(Confluence Line Strength)	-	1100.00	-
3.8.1(Compressive Strength (Resistance to Applied Load))	-	1100.00	-
3.8.2(Resistance to Drop)	-	1100.00	-
3.9(Resistance to Environmental Stress Cracking)	-	1200.00	-
3.10.1(Suspension Test)	-	1100.00	-
3.10.2(Free-Fall Test)	-	1100.00	-
3, 3.1(Requirements)	-	0.00	-
3.1(Crates)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
3.2(Material)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
3.3(Shape, Dimensions and Design)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
3.4(Mass)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
3.5(Appearance and Surface Finish)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
3.6(Dimensional Stability)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
3.7(Confluence line Strength)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
3.8(Mechanical Strength)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
3.9(Resistance to Environmental Stress Cracking)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
3.10(Handle Test)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
4(Packing and Marking)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.

24 Apr, 2027

-
-

12163

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 11584 (1986)

Specification for high density polyethylene (Hdpe) crates for milk satchets

10650.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2(Material )	-	1600.00	1. DENSITY- 500.00 2. MFI- 1100.00
2.3(Shape and Dimensions)	-	500.00	-
2.4(Mass )	-	500.00	-
2.5(Appearance and Surface Finish)	-	500.00	-
2.7(Resistance to Stress)	-	1000.00	-
2.8(Resistance to Applied Load)	-	1000.00	-
2.9(Strength)	-	3400.00	1. RESISTANCE TO DROP- 1100.00 2. RESISTANCE TO LOW TEMPERATURE DROP - 1100.00 & 1200.00 CONDITIONING CHARGE.
2.1(Dimensional Stability)	-	900.00	-
2.1(Material Identification)	-	1050.00	-
2.6(Colour Fastness)	-	19850.00	Testing Charge- 850.00 Conditioning Charge- 19000.00
2.1(Crates)	-	0.00	-
2.2(Material)	-	0.00	TESTING CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
2.3(Shape and Dimensions)	-	0.00	TESTING CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
2.4(Mass)	-	0.00	TESTING CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
2.5(Appearance and surface finish)	-	0.00	TESTING CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
2.6(Colour Fastness)	-	0.00	TESTING CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
2.7(Resistance to stress)	-	0.00	TESTING CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
2.8(Resistance to Applied Load)	-	0.00	TESTING CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
2.9(Strength)	-	0.00	TESTING CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
2.10(Dimensional Stability)	-	0.00	TESTING CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
3(Marking)	-	0.00	-

24 Apr, 2027

-
-

12164

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 11805 (2007)

Polyethylene pouches for packaging liquid milk - Specification - (Second Revision)

7900.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.5(Thickness)	-	500.00	-
5.6(Width)	-	500.00	-
5.7(Tensile Strength)	-	2600.00	1. LENGTHWISE - 1300.00 2. CROSSWISE- 1300.00
5.9(Dart Impact Resistance)	-	850.00	-
5.10(Slip (Coefficient of Friction))	-	850.00	-
8.1(Leak Test)	-	500.00	-
8.2(Drop Test)	-	1100.00	-
8.3(Ink adhesion test)	-	500.00	-
5.4(Odour)	-	500.00	-
5.1(Visual)	-	500.00	-
5.2(Film form)	-	0.00	VISUAL, FILM FORM & WINDING HAVE SINGLE CHARGE.
5.3(winding)	-	0.00	VISUAL, FILM FORM & WINDING HAVE SINGLE CHARGE.
5.8(Elongation at Break)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN ABOVE.
4(Material)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN ABOVE.
5.1(Film)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN ABOVE.
5.2(Film Form)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN ABOVE.
5.3(Winding of Film)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN ABOVE.
5.4(Odour)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN ABOVE.
5.5(Thickness)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN ABOVE.
5.6(Width)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN ABOVE.
5.7(Tensile Strength)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN ABOVE.
5.8(Elongation at Break)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN ABOVE.
5.9(Dart Impact Resistance)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN ABOVE.
5.10(Slip)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN ABOVE.
8.1(Leak test)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN ABOVE.
8.2(Drop test)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN ABOVE.
8.3(Printing Requirements)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN ABOVE.
9.1(General requirements)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN ABOVE.
10(Marking)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN ABOVE.
9.2(Product Specific Requirements)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN ABOVE.

24 Apr, 2027

-
-

12165

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 1932 (1986)

Specification for mustard and rape seed oilcake as livestock feed ingredient (Second Revision)

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(1 Description - The material shall be free from harmful constituents. The material shall be free from rancidity, adulterants, insect or visible fungus infestation and from fermented, musty or other objectionable odour. It shall be free from extraneous matter including metallic pieces.)	-	500	-
Table 1 (i)(Moisture, percent by mass)	-	1500	-
Table 1 (ii)(Crude protein )	-	1500	-
Table 1 (iii)(Crude fat or ether extract, percent by mass. Min)	-	1500	-
Table 1 (iv)(Crude fibre, percent by mass, M)	-	2000	-
Table 1 (v)(Total ash, percent by mass, Max)	-	1500	-
Table 1 (vi)(Acid-insoluble ash. percent by mass, Max)	-	2000	-

31 Dec, 2026

-
-

12166

CIPET : CSTS - AGARTALA PLASTICS TESTING LABORATORY, (CIPET, AGARTALA)

5173304

IS 11652 (2017)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg cement – Specification (third revision)

10550 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	250	-
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	250	-
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	250	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	500	Charges includes all dimensional tests of Table 1, S.l. No. i)
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	500	Charges includes all dimensional tests of Table 1, S.l. No. i)
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	500	Charges includes all dimensional tests of Table 1, S.l. No. i)
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	500	Charges includes all dimensional tests of Table 1, S.l. No. i)
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	500	Charges includes all dimensional tests of Table 1, S.l. No. i)
4.2 (Linear Density, 900 denier)	-	500	-
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	300	-
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	300	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	300	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	300	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	500	Charges includes all dimensional tests of Table 1, S.l. No. i)
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	500	Charges includes all dimensional tests of Table 1, S.l. No. i)
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	250	Charges includes all dimensional tests of clause no. 4.4
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	250	Charges includes all dimensional tests of clause no. 4.4
4.4(to a depth of minimum 25 mm, so that so that)	-	250	Charges includes all dimensional tests of clause no. 4.4
4.4(The number of stitches/dm shall be 14 ± 2.)	-	250	Charges includes all dimensional tests of clause no. 4.4
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	250	Charges includes all dimensional tests of clause no. 4.4
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	250	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	250	-
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	250	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	1100	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	1100	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	1100	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	1100	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	1100	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	1100	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	950	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	950	-
5/5.6 (UV Resistance, )	-	10180	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	1100	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	1100	-
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	200	-
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	200	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	250	Charges includes all dimensional tests of Table 1, S.l. No. i)
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	250	Charges includes all dimensional tests of Table 1, S.l. No. i)
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	250	Charges includes all dimensional tests of Table 1, S.l. No. i)
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	250	Charges includes all dimensional tests of Table 1, S.l. No. i)
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	1100	-
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	250	Charges includes all dimensional tests of Table 1, S.l. No. i)

27 Jul, 2026

-
For Unpigmented tapes only

12167

Intertek India Private Limited, New Delhi (E-20)

8122426

IS 17550 : PART 1 (2021)

HOUSEHOLD REFRIGERATING APPLIANCES CHARACTERISTICS AND TEST METHODS Part 1 General Requirements

263000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
"Cl. No.5 "(Markings)	-	8000	-
"Cl. No. 9 "(Testing The Air Tightness Of Door Or Lid Seal(S))	-	5000	-
"Cl. No.10 "(Testing The Opening Force Of Door(S) Or Lid(S))	-	10000	-
"Cl. No.11 "(Testing The Durability Of Hinges And Handles Of Door(S) And Lid(S))	-	55000	-
"Cl. No.12 "(Testing The Mechanical Strength Of Shelves And Similar Components)	-	5000	-
"Cl. No.14 "(Ice-Making Test (If Applicable))	-	40000	-
"Cl. No.15 "(Test For Absence Of Odour And Taste)	-	50000	-
"Cl. No.16 "(Safety Requirements)	-	60000	a) Protection against acess to live parts b) Power input and current c) Heating d) Leakage current and electric strength at operating temperature e) Moisture resistance f) Leakage current and electric strength (high voltage after humidity)
13(Water-vapour condensation test)	-	30000	-
"Cl. No.5 "(Markings)	-	0	Test clause repeated.
"Cl. No. 9 "(Testing The Air Tightness Of Door Or Lid Seal(S))	-	0	Test clause repeated.
"Cl. No.10 "(Testing The Opening Force Of Door(S) Or Lid(S))	-	0	Test clause repeated.
"Cl. No.11 "(Testing The Durability Of Hinges And Handles Of Door(S) And Lid(S))	-	0	Test clause repeated.
"Cl. No.12 "(Testing The Mechanical Strength Of Shelves And Similar Components)	-	0	Test clause repeated.
"Cl. No.14 "(Ice-Making Test (If Applicable))	-	0	Test clause repeated.
"Cl. No.15 "(Test For Absence Of Odour And Taste)	-	0	Test clause repeated in portal.
"Cl. No.16 "(Safety Requirements)	-	0	Test clause repeated in portal.
13(Water-vapour condensation test)	-	0	Test clause repeated.
"Cl. No.5 "(Markings)	-	0	Test clause repeated.
"Cl. No. 9 "(Testing The Air Tightness Of Door Or Lid Seal(S))	-	0	Test clause repeated.
"Cl. No.10 "(Testing The Opening Force Of Door(S) Or Lid(S))	-	0	Test clause repeated.
"Cl. No.11 "(Testing The Durability Of Hinges And Handles Of Door(S) And Lid(S))	-	0	Test clause repeated.
"Cl. No.12 "(Testing The Mechanical Strength Of Shelves And Similar Components)	-	0	Test clause repeated.
"Cl. No.14 "(Ice-Making Test (If Applicable))	-	0	Test clause repeated.
"Cl. No.15 "(Test For Absence Of Odour And Taste)	-	0	Test clause repeated.
"Cl. No.16 "(Safety Requirements)	-	0	Test clause repeated.
13(Water-vapour condensation test)	-	0	Test clause repeated.
"Cl. No.5 "(Markings)	-	0	Test clause repeated.
"Cl. No. 9 "(Testing The Air Tightness Of Door Or Lid Seal(S))	-	0	Test clause repeated.
"Cl. No.10 "(Testing The Opening Force Of Door(S) Or Lid(S))	-	0	Test clause repeated.
"Cl. No.11 "(Testing The Durability Of Hinges And Handles Of Door(S) And Lid(S))	-	0	Test clause repeated.
"Cl. No.12 "(Testing The Mechanical Strength Of Shelves And Similar Components)	-	0	Test clause repeated.
"Cl. No.14 "(Ice-Making Test (If Applicable))	-	0	Test clause repeated.
"Cl. No.15 "(Test For Absence Of Odour And Taste)	-	0	Test clause repeated.
"Cl. No.16 "(Safety Requirements)	-	0	Test clause repeated.
13(Water-vapour condensation test)	-	0	Test clause repeated.
"Cl. No.5 "(Markings)	-	0	Test clause repeated.
"Cl. No. 9 "(Testing The Air Tightness Of Door Or Lid Seal(S))	-	0	Test clause repeated.
"Cl. No.10 "(Testing The Opening Force Of Door(S) Or Lid(S))	-	0	Test clause repeated.
"Cl. No.11 "(Testing The Durability Of Hinges And Handles Of Door(S) And Lid(S))	-	0	Test clause repeated.
"Cl. No.12 "(Testing The Mechanical Strength Of Shelves And Similar Components)	-	0	Test clause repeated.
"Cl. No.14 "(Ice-Making Test (If Applicable))	-	0	Test clause repeated.
"Cl. No.15 "(Test For Absence Of Odour And Taste)	-	0	Test clause repeated.
"Cl. No.16 "(Safety Requirements)	-	0	Test clause repeated.
13(Water-vapour condensation test)	-	0	Test clause repeated.
"Cl. No.5 "(Markings)	-	0	Test clause repeated.
"Cl. No. 9 "(Testing The Air Tightness Of Door Or Lid Seal(S))	-	0	Test clause repeated.
"Cl. No.10 "(Testing The Opening Force Of Door(S) Or Lid(S))	-	0	Test clause repeated.
"Cl. No.11 "(Testing The Durability Of Hinges And Handles Of Door(S) And Lid(S))	-	0	Test clause repeated.
"Cl. No.12 "(Testing The Mechanical Strength Of Shelves And Similar Components)	-	0	Test clause repeated.
"Cl. No.14 "(Ice-Making Test (If Applicable))	-	0	Test clause repeated.
"Cl. No.15 "(Test For Absence Of Odour And Taste)	-	0	Test clause repeated.
"Cl. No.16 "(Safety Requirements)	-	0	Test clause repeated.
13(Water-vapour condensation test)	-	0	Test clause repeated.
"Cl. No.5 "(Markings)	-	0	Test clause repeated.
"Cl. No. 9 "(Testing The Air Tightness Of Door Or Lid Seal(S))	-	0	Test clause repeated.
"Cl. No.10 "(Testing The Opening Force Of Door(S) Or Lid(S))	-	0	Test clause repeated.
"Cl. No.11 "(Testing The Durability Of Hinges And Handles Of Door(S) And Lid(S))	-	0	Test clause repeated.
"Cl. No.12 "(Testing The Mechanical Strength Of Shelves And Similar Components)	-	0	Test clause repeated.
"Cl. No.14 "(Ice-Making Test (If Applicable))	-	0	Test clause repeated.
"Cl. No.15 "(Test For Absence Of Odour And Taste)	-	0	Test clause repeated.
"Cl. No.16 "(Safety Requirements)	-	0	Test clause repeated.
13(Water-vapour condensation test)	-	0	Test clause repeated.
"Cl. No.5 "(Markings)	-	0	Test clause repeated.
"Cl. No. 9 "(Testing The Air Tightness Of Door Or Lid Seal(S))	-	0	Test clause repeated.
"Cl. No.10 "(Testing The Opening Force Of Door(S) Or Lid(S))	-	0	Test clause repeated.
"Cl. No.11 "(Testing The Durability Of Hinges And Handles Of Door(S) And Lid(S))	-	0	Test clause repeated.
"Cl. No.12 "(Testing The Mechanical Strength Of Shelves And Similar Components)	-	0	Test clause repeated.
"Cl. No.14 "(Ice-Making Test (If Applicable))	-	0	Test clause repeated.
"Cl. No.15 "(Test For Absence Of Odour And Taste)	-	0	Test clause repeated.
"Cl. No.16 "(Safety Requirements)	-	0	Test clause repeated.
13(Water-vapour condensation test)	-	0	Test clause repeated.
"Cl. No.5 "(Markings)	-	0	Test clause repeated.
"Cl. No. 9 "(Testing The Air Tightness Of Door Or Lid Seal(S))	-	0	Test clause repeated.
"Cl. No.10 "(Testing The Opening Force Of Door(S) Or Lid(S))	-	0	Test clause repeated.
"Cl. No.11 "(Testing The Durability Of Hinges And Handles Of Door(S) And Lid(S))	-	0	Test clause repeated.
"Cl. No.12 "(Testing The Mechanical Strength Of Shelves And Similar Components)	-	0	Test clause repeated.
"Cl. No.14 "(Ice-Making Test (If Applicable))	-	0	Test clause repeated.
"Cl. No.15 "(Test For Absence Of Odour And Taste)	-	0	Test clause repeated.
"Cl. No.16 "(Safety Requirements)	-	0	Test clause repeated.
13(Water-vapour condensation test)	-	0	Test clause repeated.
"Cl. No.5 "(Markings)	-	0	-
"Cl. No. 9 "(Testing The Air Tightness Of Door Or Lid Seal(S))	-	0	-
"Cl. No.10 "(Testing The Opening Force Of Door(S) Or Lid(S))	-	0	-
"Cl. No.11 "(Testing The Durability Of Hinges And Handles Of Door(S) And Lid(S))	-	0	Test clause repeated.
"Cl. No.12 "(Testing The Mechanical Strength Of Shelves And Similar Components)	-	0	Test clause repeated.
"Cl. No.14 "(Ice-Making Test (If Applicable))	-	0	Test clause repeated.
"Cl. No.15 "(Test For Absence Of Odour And Taste)	-	0	Test clause repeated.
"Cl. No.16 "(Safety Requirements)	-	0	Test clause repeated.
13(Water-vapour condensation test)	-	0	Test clause repeated.
"Cl. No.5 "(Markings)	-	0	Test clause repeated.
"Cl. No. 9 "(Testing The Air Tightness Of Door Or Lid Seal(S))	-	0	Test clause repeated.
"Cl. No.10 "(Testing The Opening Force Of Door(S) Or Lid(S))	-	0	Test clause repeated.
"Cl. No.11 "(Testing The Durability Of Hinges And Handles Of Door(S) And Lid(S))	-	0	Test clause repeated.
"Cl. No.12 "(Testing The Mechanical Strength Of Shelves And Similar Components)	-	0	Test clause repeated.
"Cl. No.14 "(Ice-Making Test (If Applicable))	-	0	Test clause repeated.
"Cl. No.15 "(Test For Absence Of Odour And Taste)	-	0	Test clause repeated.
"Cl. No.16 "(Safety Requirements)	-	0	Test clause repeated.
13(Water-vapour condensation test)	-	0	Test clause repeated.
"Cl. No.5 "(Markings)	-	0	Test clause repeated.
"Cl. No. 9 "(Testing The Air Tightness Of Door Or Lid Seal(S))	-	0	Test clause repeated.
"Cl. No.10 "(Testing The Opening Force Of Door(S) Or Lid(S))	-	0	Test clause repeated.
"Cl. No.11 "(Testing The Durability Of Hinges And Handles Of Door(S) And Lid(S))	-	0	Test clause repeated.
"Cl. No.12 "(Testing The Mechanical Strength Of Shelves And Similar Components)	-	0	Test clause repeated.
"Cl. No.14 "(Ice-Making Test (If Applicable))	-	0	Test clause repeated.
"Cl. No.15 "(Test For Absence Of Odour And Taste)	-	0	Test clause repeated.
"Cl. No.16 "(Safety Requirements)	-	0	Test clause repeated.
13(Water-vapour condensation test)	-	0	Test clause repeated.
"Cl. No. 9 "(Testing The Air Tightness Of Door Or Lid Seal(S))	-	0	Test clause repeated.
9(Testing the Air tightness of door or lid seal(s) before water vapour condensation test)	-	0	Test clause repeated.
9(Testing the Air tightness of door or lid seal(s) after water vapour condensation test)	-	0	Test clause repeated.
"Cl. No.10 "(Testing The Opening Force Of Door(S) Or Lid(S))	-	0	Test clause repeated.
10(Testing the Opening force of door(s) or lid(s))	-	0	Test clause repeated.
"Cl. No.11 "(Testing The Durability Of Hinges And Handles Of Door(S) And Lid(S))	-	0	Test clause repeated.
11(Testing the Durability of hinges and handles of door(s) and lid(s))	-	0	Test clause repeated.
"Cl. No.12 "(Testing The Mechanical Strength Of Shelves And Similar Components)	-	0	Test clause repeated.
12(Testing the Mechanical strength of shelves and similar components)	-	0	Test clause repeated.
"Cl. No.14 "(Ice-Making Test (If Applicable))	-	0	Test clause repeated.
14(Ice-making test (if applicable))	-	0	Test clause repeated.
"Cl. No.15 "(Test For Absence Of Odour And Taste)	-	0	Test clause repeated.
15(Test for absence of odour and taste)	-	0	Test clause repeated.
5(Marking)	-	0	Test clause repeated.
4(Classification)	-	0	-
6.2(Determination of Linear Dimensions)	-	0	-
7(Instructions)	-	0	-
"Cl. No.16(a) "(Protection against acess to live parts)	-	0	Test charge for this clause is included in clause 16 of is 17550 (Part 1) : 2021
"Cl. No.16(b) "(Power input and current)	-	0	Test charge for this clause is included in clause 16 of is 17550 (Part 1) : 2021
"Cl. No.16(c) "(Heating)	-	0	Test charge for this clause is included in clause 16 of is 17550 (Part 1) : 2021
"Cl. No.16(d) "(Leakage current and electric strength at operating temperature)	-	0	Test charge for this clause is included in clause 16 of is 17550 (Part 1) : 2021
"Cl. No.16(e) "(Moisture resistance)	-	0	Test charge for this clause is included in clause 16 of is 17550 (Part 1) : 2021
"Cl. No.16(f) "(Leakage current and electric strength)	-	0	Test charge for this clause is included in clause 16 of is 17550 (Part 1) : 2021
16(a)(Protection against access to live parts)	-	0	Test clause repeated.
16(b)(Power input and current)	-	0	Test clause repeated.
16 (c(Heating)	-	0	Test clause repeated.
16(d)(Leakage current and electric strength at operating temperature)	-	0	Test clause repeated.
16(e)(Moisture resistance)	-	0	Test clause repeated.
16(f)(Leakage current and electric strength (high voltage after humidity))	-	0	Test clause repeated.
17(Packing)	-	0	Test charge for this clause is included in clause 5 of IS 17550 (Part 1) : 2021.
18(Designation)	-	0	Test charge for this clause is included in clause 5 of IS 17550 (Part 1) : 2021.
19(Instructions for Use and Maintenance)	-	0	Test charge for this clause is included in clause 5 of IS 17550 (Part 1) : 2021.

27 Oct, 2028

-
Included w.e.f. 05.04.2024 Excluding test on components (Cl. 8.8, 8.9, 8.10, 8.11)

12168

CIPET : CSTS - AGARTALA PLASTICS TESTING LABORATORY, (CIPET, AGARTALA)

5173304

IS 16208 (2015)

Textiles - High density polyethylene (HDPE)/polypropylene (PP) woven sacks for packaging 10 kg, 15 kg, 20 kg, 25 kg and 30 kg foodgrains - Specification

19030 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Tapes – Width IS 6192 and IS 11197)	-	200	-
4.2(Tapes – Linear Density )	-	500	-
4.3.1(Bottom Seam)	-	250	Includes charges of all dimensional Tests of Clause No. 4.3.1
4.3.1( The two rows of stitches shall be separated from each other)	-	250	Includes charges of all dimensional Tests of Clause No. 4.3.1
4.3.1( The outer stitch)	-	250	Includes charges of all dimensional Tests of Clause No. 4.3.1
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	250	Includes charges of all dimensional Tests of Clause No. 4.3.1
4.3.1(The number of stitches/dm)	-	250	Includes charges of all dimensional Tests of Clause No. 4.3.1
4.3.2(Mouth)	-	250	Includes charges of all dimensional Tests of Clause No. 4.3.1
5.2 and Table 1 ii a(Dimensions Inside Length)	-	250	Charges includes dimensions (Inside length & width)
5.2 and Table 1 ii b(Dimensions Inside Width)	-	250	Charges includes dimensions (Inside length & width)
5.2 and Table 1 iii(Ends per dm )	-	200	-
5.2 and Table 1 iv(Picks per dm )	-	200	-
5.1 and Table 1 v(Mass of sack )	-	300	-
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	2200	Avg. Breaking Strength & Elongation at break of Fabric in length and width wise
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise )	-	2200	Avg. Breaking Strength & Elongation at break of Fabric in length and width wise
5.2 and Table 1 vi(Breaking strength of bottom seam )	-	1100	-
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise)	-	1100	-
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise )	-	1100	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	2200	-
5.2 and Table 1 x(Ash content )	-	950	-
4.4 and Table 1 i(Capacity)	-	250	-
4.2(Construction)	-	250	Charges includes dimensions (Inside length & width)

27 Jul, 2026

-
For Unpigmented tapes only

12169

CIPET : CSTS - AGARTALA PLASTICS TESTING LABORATORY, (CIPET, AGARTALA)

5173304

IS 14887 (2014)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision)

18830 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Tapes – Width and Thickness ( IS 6192/IS 11197))	-	200	-
3.2(Tapes – Linear Density (IS 6192/IS 11197))	-	500	-
3.2(Tapes – Tenacity (IS 6192/IS 11197))	-	1100	Including Elongation of Tape
3.2(Tapes – Elongation at point of rupture (IS 6192/IS 11197))	-	1100	Including Elongation of Tenacity
3.2(Tapes – Heat Shrinkage (HDPE) (Cl. 3.2 and IS 6192))	-	850	-
3.2(Tapes – Dimensional stability (PP) (IS 11197))	-	85025	-
3.3.1(Bottom seam (IS 10789))	-	250	-
4.1 and 3.4(Mass of bale (Cl. 4.1), Capacity (Cl 3.4))	-	300	-
4.2 and Table 1 ii(Dimensions )	-	250	-
5.2 and Table 1 iii(Ends per dm )	-	200	-
5.2 and Table 1 iv(Picks per dm )	-	200	-
4.2 and Table 1 v(Mass of sack )	-	300	-
4.2 and Table 1 vi(Average breaking strength of fabric )	-	2200	Rs. 1100 each for length wise and width wise including elongation
4.2 and Table 1 vi(Breaking strength of bottom seam )	-	1100	-
4.2 and Table 1 viii(Elongation at break of fabric )	-	2200	Rs. 1100 each for length wise and width wise including breaking strength
4.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	11880	Rs. 9600 for UV exposure
4.2 and Table 1 x(Ash content )	-	950	-
3.1(Overall Migration)	-	1700	-
3.2(Density)	-	500	-
3.2(MFI)	-	1100	-
3.1(Material Identification)	-	2000	-
3.2(Unlaminated Fabric Mass )	-	250	-

27 Jul, 2026

-
For Unpigmented tapes only

12170

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 16190 (2014)

Agro textiles - High density polyethylene (HDPE) laminated woven lay flat tube for irrigation purpose - Specification

67548 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4,4.1 IS 6192( MATERIALS HDPE Tapes)	-	4750.00	1. MATERIAL IDENTIFICATION - 2000.00 2. WIDTH OF TAPE - 250.00 3. LINEAR DENSITY - 500.00 4. PRESENCE OF UV STABLIZER - 2000.00
4.2 IS 6899(MATERIALS HDPE Fabric)	-	500.00	1. ENDS PER DM - 250.00 2. PICKS PER DM - 250.00
5,5.1(MANUFACTURE Lamination )	-	4000.00	1. PRESENCE OF UV STABLIZER - 2000.00 2. MATERIAL IDENTIFICATION - 2000.00
5,5.2(MANUFACTURE A 5 layer laminated fabric is produced using acombination of 2 layers of HDPE fabric and 3 layersof coating film. The minimum coating thickness shall be 35 µ. The layers of HDPE fabric used to manufacture lay flat tubes, shall be joined by sandwich lamination.The minimum thickness of the sandwich laminationshall be 40 µ. )	-	250.00	-
5,5.3 Table 1.(MANUFACTURE The laminated HDPE woven fabric is to be formed in to lay flat tube of the required inside diameter using a heat sealing process keeping the minimum overlap as specified in Table 1.)	-	250.00	-
6(REQUIREMENTS)	-	250.00	-
6. Table 2 ii) a) IS 1969 (Part 1) ( Breaking strength before UV exposure : Wrap)	-	2200.00	1. WARP WAY- 1100.00 & 250 SPECIMEN CHARGE. 2. WEFT WAY- 1100.00 & 250 SPECIMEN CHARGE.
6. Table 2 iv) b) Annex B(Retention of breaking strength after UV exposure of 500 h : weft 85 percent of original actual value (fabric))	-	2200.00	1. WARP WAY- 1100.00 & 250 SPECIMEN CHARGE. 2. WEFT WAY- 1100.00 & 250 SPECIMEN CHARGE.
6(REQUIREMENTS)	-	89000.00	UV EXPOSURE CHARGE- 89000.00
6. Table 2 v) IS 14714 (Abrasion resistance : Loss in breaking strength shall not be more than 15 percent)	-	1375.00	Test Charge- 875.00 SPECIMEN PREPARTION CHARGE- 500.00
6. Table 2 vi) a) IS 14293 ( Trapezoid tear strength: Wrap)	-	1350.00	Test Charge-1100.00 SPECIMEN PREPARTION CHARGE- 250.00
6. Table 2 vi) b) IS 14293 ( Trapezoid tear strength : Weft)	-	1350.00	Test Charge-1100.00 SPECIMEN PREPARTION CHARGE- 250.00
6. Table 2 vii) Annex C (Puncture strength)	-	1350.00	Test Charge-1100.00 SPECIMEN PREPARTION CHARGE- 250.00
6. Table 2 viii) Annex D ( Environmental stress cracking test : )	-	1200.00	-
6. Table 2 ix) a) IS 7016(Part 8) (Oven method) (Accelerated ageing test for 72 h at 70 ± 1°C: Loss in breaking strength shall not be more than 15 percent Wrap)	-	1800.00	AGEING CHARGE-1800.00
6. Table 2 x) Annex E (Cold cracking resistance test at –5°C)	-	1100.00	-
6.1 Table 1(Internal Diameter : The inside diameter of the lay flat tube shall be as given in Table 1. The internal diameter of the lay flat tube shall be measured by a suitable conical plug gauge and shall conform to the tolerance specified in Table 1)	-	250.00	-
6.2(Workmanship)	-	300.00	-
6.3,6.3.1(Hydrostatic Burst Pressure Test)	-	1500.00	Test Charge-1000.00 SPECIMEN PREPARTION CHARGE- 500.00
6.4 , 6.4.1(Proof Pressure Tes)	-	1500.00	Test Charge-1000.00 SPECIMEN PREPARTION CHARGE- 500.00
6.5( Length : Unless specified otherwise, the standard length shall be 30 m. A tolerance of +5 percent shall be permitted on the length prescribed for the lay flat tube by the purchaser. No negative tolerance shall be permitted)	-	250.00	-
6.6(Kink Test :)	-	1100.00	-
6.7 IS 1969 (Part 1)(Welded Seam Strength Before UV Exposure : When a sample of fabric with seam cut from the lay flat tube is tested for welded seam strength as per the method specified in IS 1969 (Part 1), welded seam strength before UV exposure shall be not less than the 80 percent of the original actual fabric strength)	-	1350.00	Test Charge- 1100.00 SPECIMEN PREPARTION CHARGE- 250.00
6.8 Annex B and IS 1969 (Part 1)(Welded Seam Strength After UV Exposure: When a sample of fabric with seam cut from the lay flat tube is tested for welded seam strength as per the method specified in Annex B and IS 1969 (Part 1), the loss in welded seam strength after UV exposure shall be not more than 15 percent)	-	1100.00	-
6. Table 2 ix) b) IS 7016(Part 8) (Oven method) (Accelerated ageing test for 72 h at 70 ± 1°C: Loss in breaking strength shall not be more than 1 5 percent Weft)	-	0.00	-
6. Table 2 iii) IS 1969 (Part 1) ( Elongation at break)	-	0.00	-
6.5( Length : Unless specified otherwise, the standard length shall be 30 m. A tolerance of +5 percent shall be permitted on the length prescribed for the lay flat tube by the purchaser. No negative tolerance shall be permitted)	-	0.00	-
5,5.3 Table 1.(MANUFACTURE The laminated HDPE woven fabric is to be formed in to lay flat tube of the required inside diameter using a heat sealing process keeping the minimum overlap as specified in Table 1.)	-	0.00	-
6. Table 2 vi) a) IS 14293 ( Trapezoid tear strength: Wrap)	-	0.00	-
6. Table 2 vi) b) IS 14293 ( Trapezoid tear strength : Weft)	-	0.00	-
6. Table 2 i) IS 1964 (Mass)	-	0.00	-
6. Table 2 ii) b) IS 1969 (Part 1) ( Breaking strength before UV exposure : Weft)	-	0.00	-
6. Table 2 iv) a) Annex B(Retention of breaking strength after UV exposure of 500 h : Wrap 85 percent of original actual value (fabric))	-	0.00	-
5,5.1(MANUFACTURE Lamination )	-	0.00	-
8(PACKING)	-	0.00	-
6. Table 2 v) IS 14714 (Abrasion resistance : Loss in breaking strength shall not be more than 15 percent)	-	0.00	-
6. Table 2 ix) a) IS 7016(Part 8) (Oven method) (Accelerated ageing test for 72 h at 70 ± 1°C: Loss in breaking strength shall not be more than 15 percent Wrap)	-	0.00	-
6. Table 2 ix) b) IS 7016(Part 8) (Oven method) (Accelerated ageing test for 72 h at 70 ± 1°C: Loss in breaking strength shall not be more than 1 5 percent Weft)	-	0.00	-
6. Table 2 iii) IS 1969 (Part 1) ( Elongation at break)	-	0.00	-
6. Table 2 i) IS 1964 (Mass)	-	0.00	-
6. Table 2 vii) Annex C (Puncture strength)	-	0.00	-
6. Table 2 iv) b) Annex B(Retention of breaking strength after UV exposure of 500 h : weft 85 percent of original actual value (fabric))	-	0.00	-
6. Table 2 ii) b) IS 1969 (Part 1) ( Breaking strength before UV exposure : Weft)	-	0.00	-
4,4.1 IS 6192( MATERIALS HDPE Tapes)	-	0.00	-
4.2 IS 6899(MATERIALS HDPE Fabric)	-	0.00	-
5,5.2(MANUFACTURE A 5 layer laminated fabric is produced using acombination of 2 layers of HDPE fabric and 3 layersof coating film. The minimum coating thickness shall be 35 µ. The layers of HDPE fabric used to manufacture lay flat tubes, shall be joined by sandwich lamination.The minimum thickness of the sandwich laminationshall be 40 µ. )	-	0.00	-
6. Table 2 viii) Annex D ( Environmental stress cracking test : )	-	0.00	-
6. Table 2 x) Annex E (Cold cracking resistance test at –5°C)	-	0.00	-
6.1 Table 1(Internal Diameter : The inside diameter of the lay flat tube shall be as given in Table 1. The internal diameter of the lay flat tube shall be measured by a suitable conical plug gauge and shall conform to the tolerance specified in Table 1)	-	0.00	-
6.2(Workmanship)	-	0.00	-
6.3,6.3.1(Hydrostatic Burst Pressure Test)	-	0.00	-
6.4 , 6.4.1(Proof Pressure Tes)	-	0.00	-
6.6(Kink Test :)	-	0.00	-
6.7 IS 1969 (Part 1)(Welded Seam Strength Before UV Exposure : When a sample of fabric with seam cut from the lay flat tube is tested for welded seam strength as per the method specified in IS 1969 (Part 1), welded seam strength before UV exposure shall be not less than the 80 percent of the original actual fabric strength)	-	0.00	-
6.8 Annex B and IS 1969 (Part 1)(Welded Seam Strength After UV Exposure: When a sample of fabric with seam cut from the lay flat tube is tested for welded seam strength as per the method specified in Annex B and IS 1969 (Part 1), the loss in welded seam strength after UV exposure shall be not more than 15 percent)	-	0.00	-
8(PACKING)	-	0.00	-
6. Table 2 v) IS 14714 (Abrasion resistance : Loss in breaking strength shall not be more than 15 percent)	-	0.00	-
6. Table 2 ix) a) IS 7016(Part 8) (Oven method) (Accelerated ageing test for 72 h at 70 ± 1°C: Loss in breaking strength shall not be more than 15 percent Wrap)	-	0.00	-
6. Table 2 ix) b) IS 7016(Part 8) (Oven method) (Accelerated ageing test for 72 h at 70 ± 1°C: Loss in breaking strength shall not be more than 1 5 percent Weft)	-	0.00	-
6. Table 2 iii) IS 1969 (Part 1) ( Elongation at break)	-	0.00	-
6.5( Length : Unless specified otherwise, the standard length shall be 30 m. A tolerance of +5 percent shall be permitted on the length prescribed for the lay flat tube by the purchaser. No negative tolerance shall be permitted)	-	0.00	-
5,5.3 Table 1.(MANUFACTURE The laminated HDPE woven fabric is to be formed in to lay flat tube of the required inside diameter using a heat sealing process keeping the minimum overlap as specified in Table 1.)	-	0.00	-
6. Table 2 vi) a) IS 14293 ( Trapezoid tear strength: Wrap)	-	0.00	-
6. Table 2 vi) b) IS 14293 ( Trapezoid tear strength : Weft)	-	0.00	-
6. Table 2 i) IS 1964 (Mass)	-	0.00	-
6. Table 2 vii) Annex C (Puncture strength)	-	0.00	-
6. Table 2 iv) b) Annex B(Retention of breaking strength after UV exposure of 500 h : weft 85 percent of original actual value (fabric))	-	0.00	-
6. Table 2 ii) b) IS 1969 (Part 1) ( Breaking strength before UV exposure : Weft)	-	0.00	-
6. Table 2 iv) a) Annex B(Retention of breaking strength after UV exposure of 500 h : Wrap 85 percent of original actual value (fabric))	-	0.00	-
6. Table 2 ii) a) IS 1969 (Part 1) ( Breaking strength before UV exposure : Wrap)	-	0.00	-
4,4.1 IS 6192( MATERIALS HDPE Tapes)	-	0.00	-
4.2 IS 6899(MATERIALS HDPE Fabric)	-	0.00	-
4.2 IS 6899(MATERIALS HDPE Fabric)	-	0.00	-
5,5.1(MANUFACTURE Lamination )	-	0.00	-
5,5.2(MANUFACTURE A 5 layer laminated fabric is produced using acombination of 2 layers of HDPE fabric and 3 layersof coating film. The minimum coating thickness shall be 35 µ. The layers of HDPE fabric used to manufacture lay flat tubes, shall be joined by sandwich lamination.The minimum thickness of the sandwich laminationshall be 40 µ. )	-	0.00	-
6(REQUIREMENTS)	-	0.00	-
6. Table 2 viii) Annex D ( Environmental stress cracking test : )	-	0.00	-
6. Table 2 x) Annex E (Cold cracking resistance test at –5°C)	-	0.00	-
6.1 Table 1(Internal Diameter : The inside diameter of the lay flat tube shall be as given in Table 1. The internal diameter of the lay flat tube shall be measured by a suitable conical plug gauge and shall conform to the tolerance specified in Table 1)	-	0.00	-
6.2(Workmanship)	-	0.00	-
6.3,6.3.1(Hydrostatic Burst Pressure Test)	-	0.00	-
6.4 , 6.4.1(Proof Pressure Tes)	-	0.00	-
6.6(Kink Test :)	-	0.00	-
6.7 IS 1969 (Part 1)(Welded Seam Strength Before UV Exposure : When a sample of fabric with seam cut from the lay flat tube is tested for welded seam strength as per the method specified in IS 1969 (Part 1), welded seam strength before UV exposure shall be not less than the 80 percent of the original actual fabric strength)	-	0.00	-
6.8 Annex B and IS 1969 (Part 1)(Welded Seam Strength After UV Exposure: When a sample of fabric with seam cut from the lay flat tube is tested for welded seam strength as per the method specified in Annex B and IS 1969 (Part 1), the loss in welded seam strength after UV exposure shall be not more than 15 percent)	-	0.00	-
8(PACKING)	-	0.00	-
6. Table 2 v) IS 14714 (Abrasion resistance : Loss in breaking strength shall not be more than 15 percent)	-	0.00	-
6. Table 2 ix) a) IS 7016(Part 8) (Oven method) (Accelerated ageing test for 72 h at 70 ± 1°C: Loss in breaking strength shall not be more than 15 percent Wrap)	-	0.00	-
6. Table 2 ix) b) IS 7016(Part 8) (Oven method) (Accelerated ageing test for 72 h at 70 ± 1°C: Loss in breaking strength shall not be more than 1 5 percent Weft)	-	0.00	-
6. Table 2 iii) IS 1969 (Part 1) ( Elongation at break)	-	0.00	-
6.5( Length : Unless specified otherwise, the standard length shall be 30 m. A tolerance of +5 percent shall be permitted on the length prescribed for the lay flat tube by the purchaser. No negative tolerance shall be permitted)	-	0.00	-
5,5.3 Table 1.(MANUFACTURE The laminated HDPE woven fabric is to be formed in to lay flat tube of the required inside diameter using a heat sealing process keeping the minimum overlap as specified in Table 1.)	-	0.00	-
6. Table 2 vi) a) IS 14293 ( Trapezoid tear strength: Wrap)	-	0.00	-
6. Table 2 vi) b) IS 14293 ( Trapezoid tear strength : Weft)	-	0.00	-
6. Table 2 i) IS 1964 (Mass)	-	0.00	-
6. Table 2 vii) Annex C (Puncture strength)	-	0.00	-
6. Table 2 iv) b) Annex B(Retention of breaking strength after UV exposure of 500 h : weft 85 percent of original actual value (fabric))	-	0.00	-
6. Table 2 iv) a) Annex B(Retention of breaking strength after UV exposure of 500 h : Wrap 85 percent of original actual value (fabric))	-	0.00	-
6. Table 2 ii) a) IS 1969 (Part 1) ( Breaking strength before UV exposure : Wrap)	-	0.00	-
5,5.1(MANUFACTURE Lamination )	-	0.00	-
6. Table 2 viii) Annex D ( Environmental stress cracking test : )	-	0.00	-
6. Table 2 x) Annex E (Cold cracking resistance test at –5°C)	-	0.00	-
6.1 Table 1(Internal Diameter : The inside diameter of the lay flat tube shall be as given in Table 1. The internal diameter of the lay flat tube shall be measured by a suitable conical plug gauge and shall conform to the tolerance specified in Table 1)	-	0.00	-
6.2(Workmanship)	-	0.00	-
6.3,6.3.1(Hydrostatic Burst Pressure Test)	-	0.00	-
6.4 , 6.4.1(Proof Pressure Tes)	-	0.00	-
6.6(Kink Test :)	-	0.00	-
6.7 IS 1969 (Part 1)(Welded Seam Strength Before UV Exposure : When a sample of fabric with seam cut from the lay flat tube is tested for welded seam strength as per the method specified in IS 1969 (Part 1), welded seam strength before UV exposure shall be not less than the 80 percent of the original actual fabric strength)	-	0.00	-
6.8 Annex B and IS 1969 (Part 1)(Welded Seam Strength After UV Exposure: When a sample of fabric with seam cut from the lay flat tube is tested for welded seam strength as per the method specified in Annex B and IS 1969 (Part 1), the loss in welded seam strength after UV exposure shall be not more than 15 percent)	-	0.00	-
8(PACKING)	-	0.00	-
6. Table 2 iv) a) Annex B(Retention of breaking strength after UV exposure of 500 h : Wrap 85 percent of original actual value (fabric))	-	0.00	-
6. Table 2 ii) a) IS 1969 (Part 1) ( Breaking strength before UV exposure : Wrap)	-	0.00	-
6. Table 2 ii) b) IS 1969 (Part 1) ( Breaking strength before UV exposure : Weft)	-	0.00	-
4,4.1 IS 6192( MATERIALS HDPE Tapes)	-	0.00	-
5,5.2(MANUFACTURE A 5 layer laminated fabric is produced using acombination of 2 layers of HDPE fabric and 3 layersof coating film. The minimum coating thickness shall be 35 µ. The layers of HDPE fabric used to manufacture lay flat tubes, shall be joined by sandwich lamination.The minimum thickness of the sandwich laminationshall be 40 µ. )	-	0.00	-
6(REQUIREMENTS)	-	0.00	-

24 Apr, 2027

-
-

12171

BIS, Central Laboratory (CL)

None

IS 3419 (1988)

Specification for fittings for rigid non - Metallic (Second Revision)

2700.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.2 & 9.1- Table-1, ii (Inside Diameter of Collar for Slip type cuplers -IS:3419)	-
6.2 & 9.1- Table-1, iii (Inside Diameter of Ridge for Slip type cuplers -IS:3419)	-
6.2 & 9.1- Table-1, iv (Minimum overall length for Slip type cuplers -IS:3419)	-
6.2 & 9.1- Table-1, v (Minimum wall thickness for Slip type cuplers -IS:3419)	-
6.2 & 9.1- Table-2, ii (Inside Diameter of Collar for Socketed type cuplers -IS:3419)	-
6.2 & 9.1- Table-2, iii (Inside Diameter of Ridge for Socketed type cuplers -IS:3419)	-
6.2 & 9.1- Table-2, iv (Minimum overall length (a) for Socketed type cuplers -IS:3419)	-
6.2 & 9.1- Table-2, v (Minimum overall length (l) for Socketed type cuplers -IS:3419)	-
6.2 & 9.1- Table-2, vi (Minimum wall thickness for Socketed type cuplers -IS:3419)	-
6.2 & 9.1- Table-3, ii (Inside Diameter of Collar(d6) for Clamp type cuplers -IS:3419)	-
6.2 & 9.1- Table-3, iii (Inside Diameter of Collar (d5) for Clamp type cuplers -IS:3419)	-
6.2 & 9.1- Table-3, iv (Inside Diameter of Ridge for Clamp type cuplers -IS:3419)	-
6.2 & 9.1- Table-3, iv (Minimum length for Clamp type cuplers -IS:3419)	-
6.2 & 9.1- Table-3, vi (Minimum wall thickness for Clamp type cuplers -IS:3419)	-
6.2 & 9.1- Table-4, ii (Outside Dameter of Normal type bend -IS:3419)	-
6.2 & 9.1- Table-4, iii (Minimum Inside Diameter of Normal Type Bend -IS:3419)	-
6.2 & 9.1- Table-4, iv (Radious(R) of Normal Type Bend -IS:3419)	-
6.2 & 9.1- Table-4, v (Length (l1) of Normal Type Bend -IS:3419)	-
6.2 & 9.1- Table-5, ii (Outside Dameter of Slip type cupling bend -IS:3419)	-
6.2 & 9.1- Table-5, iii (Minimum Inside Diameter of Slip type cupling bend -IS:3419)	-
6.2 & 9.1- Table-5, iv (Inside Diameter of collar for Slip type cupling bend -IS:3419)	-
6.2 & 9.1- Table-5, v (R- for Slip type cupling bend -IS:3419)	-
6.2 & 9.1- Table-5, vi (Y- for Slip type cupling bend -IS:3419)	-
6.2 & 9.1- Table-5, vii (l2- for Slip type cupling bend -IS:3419)	-
6.2 & 9.1- Table-6, ii (Inside Diameter of collar for Normal type Elbows -IS:3419)	-
6.2 & 9.1- Table-6, iii (Length (l) of Normal Type Elbows -IS:3419)	-
6.2 & 9.1- Table-6, iv (Radious(r) of Normal Type Elbows -IS:3419)	-
6.2 & 9.1- Table-6, v (Minimum wall thicknes of Elbows -IS:3419)	-
6.2 & 9.1- Table-7, ii (Inside Diameter of Collear for Normal type Tees -IS:3419)	-
6.2 & 9.1- Table-7, iii (Length (l) of Normal type Tees -IS:3419)	-
6.2 & 9.1- Table-7, iv (Radious(r) of Normal type Tees -IS:3419)	-
6.2 & 9.1- Table-7, v ( Minimum wall thicknes of Normal type Tees -IS:3419)	-
6.2 & 9.1- Table-8, ii (Inside Diameter of Collear for socketed type Tees - IS:3419)	-
6.2 & 9.1- Table-8, iii (a - of socketed type Tees -IS:3419)	-
6.2 & 9.1- Table-8, iv (l - of socketed type Tees -IS:3419)	-
6.2 & 9.1- Table-8, v (Minimum wall thicknes of socketed type Tees -IS:3419)	-
6.2 & 9.1- Table-9, ii (B - of spout Type Circular Boxes -IS:3419)	-
6.2 & 9.1- Table-9, iii (C - of spout Type Circular Boxes -IS:3419)	-
6.2 & 9.1- Table-9, iv (D - of spout Type Circular Boxes -IS:3419)	-
6.2 & 9.1- Table-9, v (E - of spout Type Circular Boxes -IS:3419)	-
6.2 & 9.1- Table-9, vi (F(Max) - of spout Type Circular Boxes -IS:3419)	-
6.2 & 9.1- Table-9, vii (F(Min) - of spout Type Circular Boxes -IS:3419)	-
6.2 & 9.1- Table-9, viii (G - of spout Type Circular Boxes -IS:3419)	-
6.2 & 9.1- Table-9, ix (t - of spout Type Circular Boxes -IS:3419)	-
10 (Resistance to Heat -IS:3419)	-
11 (Resistance to Burning - IS 3419)	-
12 (Moisture Absorption - IS 3419)	-
13.2 &13.3 (Resistance to chemival action in Acid solution - IS 3419)	-
13.2 &13.3 (Resistance to chemival action in Alkaline solution - IS 3419)	-
14.1 (Copper Test - IS 3419)	-
15, 15.3 (Resistance to Oil - IS 3419)	-
15,15.4 (Resistance to Oil - IS 3419)	-
16- Appendix-A (Resistance to Impact -IS 3419)	-
17.2 (Electric Strength - IS 3419)	-
17.3 (Insulation Resistance - IS 3419)	-
Cl.7.1 (Marking)	-
Cl.7.1 (Construction)	-
Cl. 5 (Construction)	-
Cl. 5 (Construction)	-
Cl.5.3 (Construction)	-
Cl.5.3 (Construction)	-
(Cl.6) Table 9 (Dimensions A)	-
(Cl.6) Table 9 (Dimensions B)	-
(Cl.6) Table 9 (Dimensions C)	-
(Cl.6) Table 9 (Dimensions D)	-
(Cl.6) Table 9 (Dimensions E)	-
(Cl.6) Table 9 (Dimensions F)	-
(Cl.6) Table 9 (Dimensions G)	-
(Cl.6) Table 9 (Dimensions t)	-
Cl. 10 (Resistance to Heat)	-
Cl. 11 (Resistance to Burning)	-
Cl. 12 (Moisture Absorption Test)	-
Cl.13 (Resistance to Chemical Action)	-
Cl.14 (Copper Test)	-
Cl. 15 (Resistance to Oil)	-
Cl. 15 (Resistance to Oil)	-

-
-

12172

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 14611 (2016)

Multilayered cross laminated sheets/tarpaulins/covers/agricultural films - Specification (First Revision)

TYPE- XLN, LN, MN, HN, & XHN

41955.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1(Workmanship)	-	500.00	-
Cl. 6.2(Substance)	-	500.00	-
Cl. 6.3(Accelerated ageing test)	-	4200.00	AGEING CHARGE- 4200.00
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a)(Tensile strenght, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- XLN Extra light)	-	2600.00	1. LONGITUDINAL DIRECTION - 1300.00 2. TRANSVERSE DIRECTION - 1300.00
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a)(Tensile strenght, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- LN light)	-	2600.00	1. LONGITUDINAL DIRECTION - 1300.00 2. TRANSVERSE DIRECTION - 1300.00
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (a)(Tear strenght, Annex-F, Grade- LN light)	-	2600.00	1. LONGITUDINAL DIRECTION - 1300.00 2. TRANSVERSE DIRECTION - 1300.00
Table1 - v)(Dart Impact Strength)	-	850.00	-
Cl. 6.2,6.3,6.8, table no. 1 Sl No. (vi)(Average tensile strenght and elongation at break after exposing to UV radiation and weathering, Annex- G, Grade- XLN Extra light)	-	2600.00	1. LONGITUDINAL DIRECTION - 1300.00 2. TRANSVERSE DIRECTION - 1300.00
Cl. 6.4(water proofness test)	-	1000.00	-
Cl. 6.5(Strenght of joints/seams)	-	1100.00	-
Cl. 6.6(Flex test)	-	1500.00	-
Cl. 6.6(Flex test)	-	6000.00	TEST CHARGE-1500. AGEING TEST-4500.00
Cl. 6.7(Ease of in-situ Repair)	-	500.00	-
Cl. 7.1(Eyelets and rope lashing)	-	500.00	-
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (a)(Tear strenght, Annex-F, Grade- XHN Extra heavy)	-	2600.00	1. LONGITUDINAL DIRECTION - 1300.00 2. TRANSVERSE DIRECTION - 1300.00
5.1(Carbon Black Content)	-	925.00	-
5.2(Panel)	-	500.00	-
5.3(Ends & Sides dimensions)	-	500.00	-
5.4(Panel Length & width)	-	500.00	-
Cl. 6.4(water proofness test)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. i(Mass per unit area, Grade-XLN Extra light, Ref. IS 7016(Part 1))	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. i(Mass per unit area, Grade-LN Light, Ref. IS 7016(Part 1))	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. i(Mass per unit area, Grade-MN Medium, Ref. IS 7016(Part 1))	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. i(Mass per unit area, Grade-HN Heavy, Ref. IS 7016(Part 1))	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. i(Mass per unit area, Grade-XHN Extra heavy, Ref. IS 7016(Part 1))	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a)(Tensile strenght, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- MN Medium)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a)(Tensile strenght, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- HN Heavy)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a)(Tensile strenght, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- XHN Extra heavy)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (b)(Tensile strenght, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- XLN Extra light)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (b)(Tensile strenght, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- LN light)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (b)(Tensile strenght, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- MN Medium)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (b)(Tensile strenght, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- HN Heavy)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (b)(Tensile strenght, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- XHN Extra heavy)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a)(Tensile strenght, After ageing at 70±1°C 168h. Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speeed 500mm/min, Grade-XLN Extra light)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a)(Tensile strenght, After ageing at 70±1°C 168h. Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speeed 500mm/min, Grade-LN light)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a)(Tensile strenght, After ageing at 70±1°C 168h. Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speeed 500mm/min, Grade-MN Medium)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a)(Tensile strenght, After ageing at 70±1°C 168h. Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speeed 500mm/min, Grade-HN Heavy)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a)(Tensile strenght, After ageing at 70±1°C 168h. Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speeed 500mm/min, Grade-XHN Extra heavy)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (b)(Tensile strenght, After ageing at 70±1°C 168h. Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speeed 500mm/min, Grade-XLN Extra light)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (b)(Tensile strenght, After ageing at 70±1°C 168h. Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speeed 500mm/min, Grade-LN light)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (b)(Tensile strenght, After ageing at 70±1°C 168h. Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speeed 500mm/min, Grade-MN Medium)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (b)(Tensile strenght, After ageing at 70±1°C 168h. Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speeed 500mm/min, Grade-HN Heavy)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (b)(Tensile strenght, After ageing at 70±1°C 168h. Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speeed 500mm/min, Grade-XHN Extra heavy)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iii (a)(Elongation at break, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- XLN Extra light)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iii (a)(Elongation at break, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- LN light)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iii (a)(Elongation at break, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- MN Medium)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iii (a)(Elongation at break, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- HN Heavy)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iii (a)(Elongation at break, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- XHN Extra Heavy)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iii (b)(Elongation at break, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- XLN Extra light)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iii (b)(Elongation at break, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- LN light)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iii (b)(Elongation at break, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- MN Medium)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iii (b)(Elongation at break, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- HN Heavy)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iii (b)(Elongation at break, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- XHN Extra Heavy)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (a)(Tear strenght, Annex-F, Grade- MN Medium)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (a)(Tear strenght, Annex-F, Grade- HN Heavy)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (b)(Tear strenght, Annex-F, Grade- XLN Extra light)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (b)(Tear strenght, Annex-F, Grade- LN light)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (b)(Tear strenght, Annex-F, Grade- MN Medium)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (b)(Tear strenght, Annex-F, Grade- HN Heavy)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (b)(Tear strenght, Annex-F, Grade- XHN Extra heavy)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (a)(Tear strenght, After ageing at 70±1°C for 168h, Annex-F, Grade- XLN Extra light)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (a)(Tear strenght, After ageing at 70±1°C for 168h, Annex-F, Grade- LN light)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (a)(Tear strenght, After ageing at 70±1°C for 168h, Annex-F, Grade- MN Medium)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (a)(Tear strenght, After ageing at 70±1°C for 168h, Annex-F, Grade- HN heavy)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (a)(Tear strenght, After ageing at 70±1°C for 168h, Annex-F, Grade- XHN Extra heavy)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (b)(Tear strenght, After ageing at 70±1°C for 168h, Annex-F, Grade- XLN Extra light)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (b)(Tear strenght, After ageing at 70±1°C for 168h, Annex-F, Grade- LN light)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (b)(Tear strenght, After ageing at 70±1°C for 168h, Annex-F, Grade- MN Medium)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (b)(Tear strenght, After ageing at 70±1°C for 168h, Annex-F, Grade- HN heavy)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (b)(Tear strenght, After ageing at 70±1°C for 168h, Annex-F, Grade- XHN Extra heavy)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. (vi)(Average tensile strenght and elongation at break after exposing to UV radiation and weathering, Annex- G, Grade- XLN Extra light)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. (vi)(Average tensile strenght and elongation at break after exposing to UV radiation and weathering, Annex- G, Grade- LN light)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. (vi)(Average tensile strenght and elongation at break after exposing to UV radiation and weathering, Annex- G, Grade- MN Medium)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. (vi)(Average tensile strenght and elongation at break after exposing to UV radiation and weathering, Annex- G, Grade- HN Heavy)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. (vi)(Average tensile strenght and elongation at break after exposing to UV radiation and weathering, Annex- G, Grade- XHN Extra Heavy)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.1(Workmanship)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2(Substance)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.3(Accelerated ageing test)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.5(Strenght of joints/seams)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.7(Ease of in-situ Repair)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 7.1(Eyelets and rope lashing)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. i(Mass per unit area, Grade-XLN Extra light, Ref. IS 7016(Part 1))	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. i(Mass per unit area, Grade-LN Light, Ref. IS 7016(Part 1))	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. i(Mass per unit area, Grade-MN Medium, Ref. IS 7016(Part 1))	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. i(Mass per unit area, Grade-HN Heavy, Ref. IS 7016(Part 1))	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. i(Mass per unit area, Grade-XHN Extra heavy, Ref. IS 7016(Part 1))	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a)(Tensile strenght, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- XLN Extra light)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a)(Tensile strenght, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- LN light)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a)(Tensile strenght, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- MN Medium)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a)(Tensile strenght, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- HN Heavy)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a)(Tensile strenght, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- XHN Extra heavy)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (b)(Tensile strenght, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- XLN Extra light)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (b)(Tensile strenght, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- LN light)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (b)(Tensile strenght, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- MN Medium)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (b)(Tensile strenght, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- HN Heavy)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (b)(Tensile strenght, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- XHN Extra heavy)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a)(Tensile strenght, After ageing at 70±1°C 168h. Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speeed 500mm/min, Grade-XLN Extra light)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a)(Tensile strenght, After ageing at 70±1°C 168h. Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speeed 500mm/min, Grade-LN light)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a)(Tensile strenght, After ageing at 70±1°C 168h. Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speeed 500mm/min, Grade-MN Medium)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a)(Tensile strenght, After ageing at 70±1°C 168h. Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speeed 500mm/min, Grade-HN Heavy)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a)(Tensile strenght, After ageing at 70±1°C 168h. Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speeed 500mm/min, Grade-XHN Extra heavy)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (b)(Tensile strenght, After ageing at 70±1°C 168h. Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speeed 500mm/min, Grade-XLN Extra light)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (b)(Tensile strenght, After ageing at 70±1°C 168h. Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speeed 500mm/min, Grade-LN light)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (b)(Tensile strenght, After ageing at 70±1°C 168h. Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speeed 500mm/min, Grade-MN Medium)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (b)(Tensile strenght, After ageing at 70±1°C 168h. Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speeed 500mm/min, Grade-HN Heavy)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (b)(Tensile strenght, After ageing at 70±1°C 168h. Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speeed 500mm/min, Grade-XHN Extra heavy)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iii (a)(Elongation at break, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- XLN Extra light)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iii (a)(Elongation at break, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- LN light)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iii (a)(Elongation at break, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- MN Medium)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iii (a)(Elongation at break, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- HN Heavy)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iii (a)(Elongation at break, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- XHN Extra Heavy)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iii (b)(Elongation at break, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- XLN Extra light)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iii (b)(Elongation at break, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- LN light)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iii (b)(Elongation at break, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- MN Medium)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iii (b)(Elongation at break, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- HN Heavy)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iii (b)(Elongation at break, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- XHN Extra Heavy)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (a)(Tear strenght, Annex-F, Grade- XLN Extra light)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (a)(Tear strenght, Annex-F, Grade- LN light)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (a)(Tear strenght, Annex-F, Grade- MN Medium)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (a)(Tear strenght, Annex-F, Grade- HN Heavy)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (a)(Tear strenght, Annex-F, Grade- XHN Extra heavy)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (b)(Tear strenght, Annex-F, Grade- XLN Extra light)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (b)(Tear strenght, Annex-F, Grade- LN light)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (b)(Tear strenght, Annex-F, Grade- MN Medium)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (b)(Tear strenght, Annex-F, Grade- HN Heavy)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (b)(Tear strenght, Annex-F, Grade- XHN Extra heavy)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (a)(Tear strenght, After ageing at 70±1°C for 168h, Annex-F, Grade- XLN Extra light)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (a)(Tear strenght, After ageing at 70±1°C for 168h, Annex-F, Grade- LN light)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (a)(Tear strenght, After ageing at 70±1°C for 168h, Annex-F, Grade- MN Medium)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (a)(Tear strenght, After ageing at 70±1°C for 168h, Annex-F, Grade- HN heavy)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (a)(Tear strenght, After ageing at 70±1°C for 168h, Annex-F, Grade- XHN Extra heavy)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (b)(Tear strenght, After ageing at 70±1°C for 168h, Annex-F, Grade- XLN Extra light)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (b)(Tear strenght, After ageing at 70±1°C for 168h, Annex-F, Grade- LN light)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (b)(Tear strenght, After ageing at 70±1°C for 168h, Annex-F, Grade- MN Medium)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (b)(Tear strenght, After ageing at 70±1°C for 168h, Annex-F, Grade- HN heavy)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (b)(Tear strenght, After ageing at 70±1°C for 168h, Annex-F, Grade- XHN Extra heavy)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. (vi)(Average tensile strenght and elongation at break after exposing to UV radiation and weathering, Annex- G, Grade- LN light)	-	0.00	-
Cl. 6.2,6.3,6.8, table no. 1 Sl No. (vi)(Average tensile strenght and elongation at break after exposing to UV radiation and weathering, Annex- G, Grade- MN Medium)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. (vi)(Average tensile strenght and elongation at break after exposing to UV radiation and weathering, Annex- G, Grade- HN Heavy)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. (vi)(Average tensile strenght and elongation at break after exposing to UV radiation and weathering, Annex- G, Grade- XHN Extra Heavy)	-	0.00	ALREADY TAKEN ABOVE.
Cl 4(Types)	-	0.00	ALREADY TAKEN ABOVE.
Cl 5(Construction)	-	0.00	ALREADY TAKEN ABOVE.
Cl 6.1(Workmanship)	-	0.00	ALREADY TAKEN ABOVE.
Cl 6.2 & Table1(Substance)	-	0.00	ALREADY TAKEN ABOVE.
Cl 6.3 & Table1(Accelerated Ageing Test)	-	0.00	ALREADY TAKEN ABOVE.
Cl 6.4(Water Proofness Test)	-	0.00	ALREADY TAKEN ABOVE.
Cl 6.5 & Annex C(Strength Of Joints/Seams)	-	0.00	ALREADY TAKEN ABOVE.
Cl 6.6(Flex Test)	-	0.00	ALREADY TAKEN ABOVE.
Cl 6.7 & Table1(Ease of in-situ Repair)	-	0.00	ALREADY TAKEN ABOVE.
Cl 7.1(Eyelets & Rope Lashing)	-	0.00	ALREADY TAKEN ABOVE.
Table1 - vi)(Average Tensile Strength & Elongation at Break after Exposing to UV Radiation & Weathering)	-	0.00	ALREADY TAKEN ABOVE.
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (a)(Tear strenght, Annex-F, Grade- XLN Extra light)	-	0.00	ALREADY TAKEN ABOVE.

24 Apr, 2027

-
-

12173

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 17216 (2019)

Polyethylene Mulch Films for Agriculture and Horticulture • Specification

22632 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(Density)	-	500.00	-
5.1.2(Melt Flow Index)	-	1100.00	-
5.1.5(UV Stabilizer)	-	2500.00	-
5.2.1(Visual Appearance)	-	500.00	-
5.2.4(Odour)	-	500.00	-
5.3.1.1(Tolerance on thickness)	-	500.00	-
5.3.1.2(Tolerance on width)	-	500.00	-
5.3.2(Impact Strength)	-	1350.00	Test Charge-850.00 SPECIMEN PREPARATION CHARGE- 500.00
5.3.3(Tensile Strength at Break)	-	3100.00	Test Charge-2600.00 SPECIMEN PREPARATION CHARGE- 500.00
5.3.5(Coefficient of Friction)	-	850.00	-
5.3.6(Elmendorf Tear Strength)	-	2000.00	Test Charge-1500.00 SPECIMEN PREPARATION CHARGE- 500.00
5.3.7(Opacity)	-	700.00	-
5.4, Table 2(Carbon black, percent)	-	925.00	-
5.4, Table 2(Carbon black dispersion)	-	700.00	-
5.4, Table 2(Ash content, percent)	-	1200.00	-
5.5(Service Life)	-	601840.00	UV EXPOSURE CHARGE- 458 HR. - 20820.00 917 HR. - 39180.00 1834 HR. - 75860.00 2292 HR. - 94180.00 3668 HR. - 149220.00 5502 HR. - 222580.00 TOTAL - 601840.00
5.1.4(Carbon black, Toluene extract)	-	0.00	-
5.1.4(Carbon black, Volatile matter)	-	0.00	-
5.1.4(Carbon black, particle size)	-	0.00	-
5.1.4(Carbon black, Tint strength)	-	0.00	-
5.1.4(Carbon black, Density)	-	0.00	-
5.2.2(Film Form)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
5.3.2, Table 1(Impact Failure Mass)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
5.3.2, Table 1(Nominal Film Thickness)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
5.3.4(Elongation at Break)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
5.5, Annex D(U. V. Exposure (Service Life of Indian Solar Radiant Exposure 160 Kly))	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.

24 Apr, 2027

-
Exclusion: Cl.5.6 (Solar Reflectance for Reflective Mulch Film)

12174

CIPET : CSTS - AGARTALA PLASTICS TESTING LABORATORY, (CIPET, AGARTALA)

5173304

IS 12701 (1996)

Rotational moulded polyethylene water storage tanks - specification (First Revision)

17750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.3(Carbon Black Content )	-	900	-
4.2.3(Carbon Dispersion Test)	-	650	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	400	Net Capacity and Gross Capacity
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	250	overall Diameter
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	250	overall height
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	250	intwernal dia of man-hole
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	250	wall thickness
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	200	thickness of outer layer of tank
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	300	visual inspection of flat area
7.1.1(Resistance to Deformation)	-	700	-
7.2(Resistance to Impact)	-	1000	-
7.4(Tensile Strength)	-	1400	including specimen preparation charges of Rs. 300
7.5(Flexural Modulus)	-	1600	including specimen preparation charges of Rs. 500
7.6(overall Migration)	-	2300	including specimen preparation charges of Rs. 300
9.1(Lid Thickness)	-	200	-
5.1 Table 1 (7)(Minimum Weight of Tank (Without Lid))	-	500	-
4.2.1(Density)	-	500	-
4.2.2(MFI)	-	1100	-
7.3(Test for Top Load Resistance)	-	900	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	2150	-
9.2.1(Man-Hole and Hand-Hole Lids)	-	200	-
9.2(Man-Hole and Hand-Hole Lids)	-	200	-
9.1(Man-Hole and Hand-Hole Lids)	-	3150	-
10(MARKING)	-	0	-
5.4(Wall Thickness above effective height)	-	250	-
5.6(Types and Features )	-	200	-
7.1.2(Resistance to Deformation)	-	700	-

27 Jul, 2026

-
-

12175

CIPET : CSTS - AGARTALA PLASTICS TESTING LABORATORY, (CIPET, AGARTALA)

5173304

IS 10124 : Part 1 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 1 General Requirements (Second Revision)

Nominal Dia upto 355 mm

4925 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1 Table-1 Fig.1(Dimension of Socket length)	-	500	including all dimensional tests
5.1.2 Table-1(Dimensions of mean inside diameter at mid-point of socket depth)	-	500	including all dimensional tests
5.1.3 (Out of Roundness Tolerance of Socket Inside Diameter)	-	500	including all dimensional tests
5.2 Table-2 Fig.2(Dimensions of socket for elastomeric sealing ring)	-	500	including all dimensional tests
6.1(Opacity test in accordance with IS 12235 (Part 3))	-	575	-
6.2(Short Term Hydraulic Test in accordance with Annex A)	-	850	-
6.3(Effect on water test)	-	3000	-
3(Material)	-	4100	-
4(Size of fitting)	-	500	including all dimensional tests
8(Marking)	-	0	-

27 Jul, 2026

-
-

12176

Conformity Testing Labs Pvt. Ltd. Unit 2 (A33)

8139626

IS 16333 : Part 3 (2022)

Mobile phone handsets: Part 3 Indian language support for mobile phone handsets - Specific requirements(Second Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Inputting of text)	-	10000	-
5.2(Message Readability)	-	10000	-
6(Marking)	-	10000	-
5.1(Inputting of text)	-	10000	-
5.2(Message Readability)	-	10000	-
6(Marking)	-	10000	-

05 Apr, 2027

-
Revised Version of IS 16333(Part-3):2022. Included w.e.f. 25.04.2023

12177

Bharat Test House Pvt Ltd 1474 Sonipat Haryana

9135626

IS 16333 : Part 3 (2022)

Mobile phone handsets: Part 3 Indian language support for mobile phone handsets - Specific requirements(Second Revision)

Indian Language Support for Mobile Phones Handsets

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Inputting of text)	-	7000	5% Discount for BIS
5.2(Message Readability)	-	7000	5% Discount for BIS
6(Marking)	-	1000	5% Discount for BIS
5.1(Inputting of text)	-	0	-
5.2(Message Readability)	-	0	-
6(Marking)	-	0	-
5.1(Inputting of text)	-	0	-
5.2(Message Readability)	-	0	-
6(Marking)	-	0	-

19 Mar, 2029

-
-

12178

Softlines and Electrical Safety Testing Laboratory TUV Rheinland India Pvt Ltd., Gurgaon (8167106)

8167106

IS 15644 (2006)

Safety of electric toys

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
15644 Cl. 7(Marking and instructions)	-	500	-
15644 Cl. 9(Heating and abnormal operation)	-	2850	-
15644 Cl. 10(Electrical strength at operating temperature)	-	1140	-
15644 Cl. 11.1(Moisture resistance)	-	2500	-
15644 Cl. 11.2(Resistant to humidity)	-	2500	-
15644 Cl. 12(Electric strength at room temperature)	-	2500	-
15644 Cl. 13(Mechanical strength)	-	2499.96	-
15644 Cl. 14.1(Construction)	-	1140	-
15644 Cl. 14.2(Construction)	-	1140	-
15644 Cl. 14.3(Construction)	-	1140	-
15644 Cl. 14.4(Construction)	-	1140	-
15644 Cl. 14.5(Construction)	-	1140	-
15644 Cl. 14.6(Construction)	-	1140	-
15644 Cl. 14.7(Construction)	-	1140	-
15644 Cl. 14.8(Construction)	-	1140	-
15644 Cl. 14.9(Construction)	-	1140	-
15644 Cl. 14.1(Construction)	-	1140	-
15644 Cl. 14.11(Construction)	-	1140	-
15644 Cl. 14.12(Construction)	-	1140	-
15644 Cl. 14.13(Construction)	-	1140	-
15644 Cl. 14.14(Construction)	-	1140	-
15.1(Protection of cords and wires)	-	1140	-
15644 Cl. 15.2(Protection of cords and wires)	-	1140	-
15644 Cl. 16(Components)	-	500	-
15644 Cl. 17 Table-1(Screws and connections)	-	1425	-
15644 Cl. 17 Table-1(Nominal daimeter of screws made of insulating material)	-	1425	-
15644 Cl. 18(Clearance and creepage distance)	-	1425	-
15644 Cl. 19.1(Ball pressure test IEC 60695-10-2)	-	1425	-
15644 Cl. 19.2.1(Glow wire test IEC 60695-2-11)	-	1425	-
15644 Cl. 19.2.2(Needle flame test)	-	1425	-
15644 Cl. 20(Radiation, toxicity and similar hazards)	-	1500	-
8.0(Power Input)	-	1140	-
7.0(Marking and instructions)	-	1140	-

19 Jan, 2027

-
Excluding: Cl. 20.0 (Radiation, toxicity and similar hazards) and Cl. 16 (Components)

12179

CIPET : CSTS - AGARTALA PLASTICS TESTING LABORATORY, (CIPET, AGARTALA)

5173304

IS 14885 (2001)

Polyethylene pipes for the supply of gaseous fuels - Specification

upto DN 63 mm

57050 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table-2, 5.1(Conventional Density, IS 7328:1992)	-	500	-
Table-2, 5.1(Melt Flow Rate, IS 2530:1963)	-	1100	-
Table-2, 5.1(Thermal Staibility, Annex-D)	-	2000	-
Table-2, 5.1(Resistance to gas constituents, Cl 5.5)	-	6250	Rs. 1000 for effect of gas constituent test, Rs. 4000 for specimen preparation as per clause no. 5.5.1, Rs. 1000 for hydrostatic characteristics test, Rs. 250 for specimen preparation as per clause no. 5.5.2.
6.1, Table-3(Ovality Pipe, Cl 6.3.2)	-	500	including all dimensional testing
6.1, Table-3(Nominal Outside Diameter of Pipes , Cl 6.3.1)	-	500	including all dimensional testing
6.2.1, Table-4(Minimum Wall Thickness, Cl.6.3, Cl.6.2.1.1, Table-5)	-	500	including all dimensional testing
6.4(Length of pipe)	-	500	including all dimensional testing
8.1(Hydraulic Charactristics, Annex-A)	-	15800	Rs. 11000 for type test and 4800 for acceptance test
8.2(Reversion Test. Annex-C)	-	700	-
8.3(Density, Annex A of IS 7328)	-	500	-
8.4(Melt Flow Rate (MFR), IS 2530)	-	1100	-
8.5(Thermal Stability to Oxidation, Annex-D)	-	2100	-
8.7(Tensile yield strength, Annex-J)	-	1350	including elongation at break
8.7(Elongation at break, Annex-J)	-	1350	including tensile strength
8.8(Resistance to Weathering, Annex-F)	-	17500	Rs. 9000 for resistance to weathering testing, Rs. 1100 for elongation at break test, Rs. 250 for specimen preparation, Rs. 4800 for hydrostatic characteristics test, Rs. 250 for specimen preparation of notched pipe, Rs. 2100 for OIT.
8.9(Squeeze off, Annex-G)	-	6350	Rs. 1300 for squeeze of test, Rs. 4800 for hydrostatic pressure test, Rs. 250 for specimen preparation.
8.6 & Table-2(Volatile Content: Annex-H of IS 14885)	-	700	-
8.5 & Table-2(Thermal Stability to Oxidation, Annex-D of IS 14885)	-	2100	-
Table-2, 5.1(Pigment dispersion, Annex-E)	-	600	-
7, Table-6(Maximmn Out of Square of Each Pipe End)	-	500	including all dimensions

27 Jul, 2026

-
-

12180

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 9537 : Part 3 (1983)

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials

16 TO 63 MM

10300.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1.1(Maximum and minimum outside diameter of socket)	-	1000.00	-
7.1.1 Table-2(Length of Socket end)	-	0.00	ALL DIMENSION HAVE SINGLE CHARGE
7.1.2(Maximum and minimum outside diameter of conduit)	-	0.00	ALL DIMENSION HAVE SINGLE CHARGE
7.2(Minimum inside diameter of conduit)	-	0.00	ALL DIMENSION HAVE SINGLE CHARGE
7.4(Unifomity of The wall Thickness)	-	0.00	ALL DIMENSION HAVE SINGLE CHARGE
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	500.00	-
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	1000.00	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	1100.00	-
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	1000.00	-
10(Resistance to Heat -Ball presure test)	-	700.00	-
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	700.00	-
12(Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	1600.00	Test Charge-1100.00 SPECIMEN PREPARTION CHARGE- 500.00
12(Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	1600.00	Test Charge-1100.00 SPECIMEN PREPARTION CHARGE- 500.00
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	1100.00	-
6.1(Marking)	-	0.00	Test charges for above parameter Already Taken
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	0.00	Test charges for above parameter Already Taken
6.3(Standard Mark on Conduit)	-	0.00	Test charges for above parameter Already Taken
7.3(Length of conduit)	-	0.00	Test charges for above parameter Already Taken
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	0.00	-
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	0.00	-
12(3 Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	0.00	Test charges for above parameter Already Taken
12(3 Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	0.00	Test charges for above parameter Already Taken
11.0(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	0.00	Test charges for above parameter Already Taken
10.0(Resistance to Heat -Ball presure test)	-	0.00	Test charges for above parameter Already Taken
9.5 Fig.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	0.00	Test charges for above parameter Already Taken
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	0.00	Test charges for above parameter Already Taken
9.3(Compression Test (after removal of force) as per caluse 9.3.3 of IS: 9537 (Part 1)-1980)	-	0.00	Test charges for above parameter Already Taken
9.3(Compression Test at Full force applied (On load))	-	0.00	Test charges for above parameter Already Taken
9.2(Bending Test At Low Temp (-5 ±2°C))	-	0.00	Test charges for above parameter Already Taken
9.2(Bending Test At Room Temp)	-	0.00	Test charges for above parameter Already Taken
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	0.00	Test charges for above parameter Already Taken
7.4(Unifomity of The wall Thickness)	-	0.00	Test charges for above parameter Already Taken
7.3(Length of conduit)	-	0.00	Test charges for above parameter Already Taken
7.2 Fig.3(Minimum inside diameter of conduit)	-	0.00	Test charges for above parameter Already Taken
7.1.2 Fig.2(Minimum outside diameter of conduit)	-	0.00	Test charges for above parameter Already Taken
7.1.2 Fig.1(Maximum outside diameter of conduit)	-	0.00	Test charges for above parameter Already Taken
7.1.1 Table-2(Length of Socket end)	-	0.00	Test charges for above parameter Already Taken
7.1.1 Fig.8(Maximum inside diameter of socket)	-	0.00	Test charges for above parameter Already Taken
7.1.1 Fig.7(Maximum outside diameter of socket)	-	0.00	Test charges for above parameter Already Taken
6.3(Standard Mark on Conduit)	-	0.00	Test charges for above parameter Already Taken
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	0.00	Test charges for above parameter Already Taken
6.1 - d(Marking)	-	0.00	Test charges for above parameter Already Taken
6.1 - c(Marking)	-	0.00	Test charges for above parameter Already Taken
6.1 - b(Marking)	-	0.00	Test charges for above parameter Already Taken
6.1 - a(Marking)	-	0.00	Test charges for above parameter Already Taken

24 Apr, 2027

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number

No Record Found