BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15361 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

12211

Hindustaan Testing Solutions LLP, Ambala

9122136

IS 4990 (2011)

Plywood for concrete shuttering works - Specification (Third Revision)

BWP/CS,CSC,CSFF

13100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0(Types)	-	0	20 % discount to BIS GSTIN extra as per govt rule
7.2(DIMENSIONS & TOLERANCES )	-	50	20 % discount to BIS
7.2(DIMENSIONS & TOLERANCES )	-	50	20 % discount to BIS
7.3(DIMENSIONS & TOLERANCES )	-	80	20 % discount to BIS
7.4(DIMENSIONS & TOLERANCES )	-	80	20 % discount to BIS
7.4(DIMENSIONS & TOLERANCES )	-	80	20 % discount to BIS
8.1(WORKMANSHIP AND FINISH )	-	30	20 % discount to BIS
8.3(WORKMANSHIP AND FINISH )	-	30	20 % discount to BIS
10.1.1(MOISTURE CONTENT)	-	400	20 % discount to BIS
10.1.2, 10.1.2.1 (Table-1)(GLUE ADHESION IN DRY STATE)	-	600	20 % discount to BIS
10.1.2, 10.1.2.2(GLUE ADHESION IN DRY STATE)	-	400	20 % discount to BIS
10.1.3, 10.1.3.1.1 (Table-1)(RESISTANCE TO WATER TEST)	-	1500	20 % discount to BIS
10.1.3, 10.1.3.1.2(RESISTANCE TO WATER TEST)	-	900	20 % discount to BIS
10.1.4(RESISTANCE TO WATER TEST)	-	600	20 % discount to BIS
10.1.5(MYCOLOGICAL TEST )	-	1800	20 % discount to BIS
10.1.5, 10.1.5.1 (Table-1)(MYCOLOGICAL TEST )	-	600	20 % discount to BIS
10.1.5.2(MYCOLOGICAL TEST )	-	400	20 % discount to BIS
10.1.6(TENSILE STRENGTH)	-	1000	20 % discount to BIS
10.1.7 (Table-2)(STATIC BENDING STRENGTH)	-	750	20 % discount to BIS
10.1.7 (Table-2)(STATIC BENDING STRENGTH)	-	750	20 % discount to BIS
10.1.8 (Table-3)(WET BENDING STRENGTH)	-	1000	20 % discount to BIS
10.1.8 (Table-3)(WET BENDING STRENGTH)	-	1000	20 % discount to BIS
10.1.9(RETENTION OF PRESERVATIVE)	-	1000	20 % discount to BIS
12, 12.1(MARKING)	-	0	20 % discount to BIS
12, 12.2(MARKING)	-	0	20 % discount to BIS

12 Sep, 2028

-
-

12212

Hindustaan Testing Solutions LLP, Ambala

9122136

IS 383 (2016)

Coarse and Fine Aggregate for Concrete - Specification (Third Revision)

Coarse & Fine

12750 View breakup
Coarse -Rs.12750/-, Fine-Rs.9750/-. (Additional test Rs.3600/- for manufactured aggregates)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4.1 (a)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	1000	(For Coarse Aggregate-12750, Fine Aggregate-9750) 20 % discount to BIS GSTIN extra as per Government Rule
5.4.2(a)( Aggregates Impact Value)	-	500	20 % discount to BIS GSTIN extra as per Government Rule
5.4.3(a)( Aggregate Abrasion Value)	-	500	20 % discount to BIS GSTIN extra as per Government Rule
6.1-Table 7(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Nominal Size of aggregate)	-	800	20 % discount to BIS GSTIN extra as per Government Rule
6.3-Table 9(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Grading Zone)	-	800	20 % discount to BIS GSTIN extra as per Government Rule
6.4-Table 10(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Nominal Size )	-	800	20 % discount to BIS GSTIN extra as per Government Rule
5.4.1 (b)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	0	20 % discount to BIS GSTIN extra as per Government Rule
5.4.2(b)( Aggregates Impact Value)	-	0	20 % discount to BIS GSTIN extra as per Government Rule
6.1-Table 7(i)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 80 mm sieve )	-	0	20 % discount to BIS GSTIN extra as per Government Rule
6.1-Table 7(ii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 63 mm sieve )	-	0	20 % discount to BIS GSTIN extra as per Government Rule
6.1-Table 7(iii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 40 mm sieve )	-	0	20 % discount to BIS GSTIN extra as per Government Rule
6.1-Table 7(iv)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 20 mm sieve )	-	0	20 % discount to BIS GSTIN extra as per Government Rule
6.1-Table 7(v)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 16 mm sieve )	-	0	20 % discount to BIS GSTIN extra as per Government Rule
6.1-Table 7(vi)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 12.5 mm sieve )	-	0	20 % discount to BIS GSTIN extra as per Government Rule
6.1-Table 7(vii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 10 mm sieve )	-	0	20 % discount to BIS GSTIN extra as per Government Rule
6.1-Table 7(viii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 4.75 mm sieve )	-	0	20 % discount to BIS GSTIN extra as per Government Rule
6.1-Table 7(ix)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 2.36 mm sieve )	-	0	20 % discount to BIS GSTIN extra as per Government Rule
6.2-Table 7(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Nominal Size of aggregate)	-	800	20 % discount to BIS GSTIN extra as per Government Rule
6.2-Table 7(i)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 80 mm sieve)	-	0	20 % discount to BIS GSTIN extra as per Government Rule
6.2-Table 7(ii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 63 mm sieve)	-	0	20 % discount to BIS GSTIN extra as per Government Rule
6.2-Table 7(iii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 40 mm sieve)	-	0	20 % discount to BIS GSTIN extra as per Government Rule
6.2-Table 7(iv)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 20 mm sieve)	-	0	20 % discount to BIS GSTIN extra as per Government Rule
6.2-Table 7(v)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 16 mm sieve)	-	0	20 % discount to BIS GSTIN extra as per Government Rule
6.2-Table 7(vi)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 12.5 mm sieve)	-	0	20 % discount to BIS GSTIN extra as per Government Rule
6.2-Table 7(vii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 10 mm sieve)	-	0	20 % discount to BIS GSTIN extra as per Government Rule
6.2-Table 7(viii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 4.75 mm sieve)	-	0	20 % discount to BIS GSTIN extra as per Government Rule
6.2-Table 7(ix)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 2.36 mm sieve)	-	0	20 % discount to BIS GSTIN extra as per Government Rule
6.3-Table 9(i)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 10mm Sieve )	-	0	20 % discount to BIS GSTIN extra as per Government Rule
6.3-Table 9(ii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 4.75mm Sieve )	-	0	20 % discount to BIS GSTIN extra as per Government Rule
6.3-Table 9(iii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 2.36mm Sieve )	-	0	20 % discount to BIS GSTIN extra as per Government Rule
6.3-Table 9(iv)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 1.18mm Sieve )	-	0	20 % discount to BIS GSTIN extra as per Government Rule
6.3-Table 9(v)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 600µm Sieve )	-	0	20 % discount to BIS GSTIN extra as per Government Rule
6.3-Table 9(vi)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 300µm Sieve )	-	0	20 % discount to BIS GSTIN extra as per Government Rule
6.3-Table 9(vii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 150µm Sieve )	-	0	20 % discount to BIS GSTIN extra as per Government Rule
6.4-Table 10(i)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 80mm Sieve )	-	0	20 % discount to BIS GSTIN extra as per Government Rule
6.4-Table 10(ii)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 40mm Sieve )	-	0	20 % discount to BIS GSTIN extra as per Government Rule
6.4-Table 10(iii)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 20mm Sieve )	-	0	20 % discount to BIS GSTIN extra as per Government Rule
6.4-Table 10(iv)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 4.75mm Sieve )	-	0	20 % discount to BIS GSTIN extra as per Government Rule
6.4-Table 10(v)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 600µm Sieve )	-	0	20 % discount to BIS GSTIN extra as per Government Rule
6.4-Table 10(vi)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 150µm Sieve )	-	0	20 % discount to BIS GSTIN extra as per Government Rule
5.7-Table-3-(v) IS: 2386 (P-3)(specific gravity(fine aggregate))	-	600	20 % discount to BIS GSTIN extra as per Government Rule
5.7-Table-3-(Iv) IS: 2386 (P-3)(Water absorption (fine aggregate))	-	750	20 % discount to BIS GSTIN extra as per Government Rule
5.7-Table-3-(III) IS:14959 (P-2)(Water soluble chloride content (fine aggregate))	-	750	20 % discount to BIS GSTIN extra as per Government Rule
5.7-Table-3-(II) IS:4032(Total sulphate content (fine aggregate))	-	750	20 % discount to BIS GSTIN extra as per Government Rule
5.6-IS: 2386 (P-7)(Alkali Aggregate Reaction (fine aggregate))	-	1800	20 % discount to BIS GSTIN extra as per Government Rule
5.5-IS: 2386 (P-5)(Soundness (fine aggregate))	-	1500	20 % discount to BIS GSTIN extra as per Government Rule
5.2- TABLE-2- (Note-3) IS-2386 (P-2)(Mica content (fine aggregate))	-	0	20 % discount to BIS GSTIN extra as per Government Rule
5.2- TABLE-2- (Note-4) IS-2386 (P-2)(Effect of organic impurities on strength of mortar (fine aggregate))	-	0	20 % discount to BIS GSTIN extra as per Government Rule
5.2- TABLE-2- (Note-4) IS-2386 (P-2)(Effect of organic impurities on strength of mortar (fine aggregate))	-	0	20 % discount to BIS GSTIN extra as per Government Rule
5.2- TABLE-2- (Note-4) IS-2386 (P-2)(Organic impurities (fine aggregate))	-	0	20 % discount to BIS GSTIN extra as per Government Rule
5.2- TABLE-2- (vi) IS-2386 (P-2)(Total deleterious material (fine aggregate))	-	1800	20 % discount to BIS GSTIN extra as per Government Rule
5.2- TABLE-2- (iii) IS-2386 (P-1)(Material fine aggregater than 75 micron (fine aggregate))	-	0	20 % discount to BIS GSTIN extra as per Government Rule
5.2- TABLE-2- (ii) IS-2386 (P-2)(Clay lumps (fine aggregate ))	-	0	20 % discount to BIS GSTIN extra as per Government Rule
5.2- TABLE-2- (i) IS-2386 (P-2)(Coal and Lignite (fine aggregate ))	-	0	20 % discount to BIS GSTIN extra as per Government Rule
5.7-Table-3-(v) IS: 2386 (P-3)(specific gravity(coarse aggregate))	-	600	20 % discount to BIS GSTIN extra as per Government Rule
5.7-Table-3-(Iv) IS: 2386 (P-3)(Water absorption (coarse aggregate))	-	750	20 % discount to BIS GSTIN extra as per Government Rule
5.7-Table-3-(III) BN EN: 1744(Water soluble chloride content (coarse aggregate))	-	750	20 % discount to BIS GSTIN extra as per Government Rule
5.7-Table-3-(II) BN EN: 1744(Total sulphate content (coarse aggregate))	-	750	20 % discount to BIS GSTIN extra as per Government Rule
5.5-IS: 2386 (P-5)(Soundness (coarse aggregate))	-	1500	20 % discount to BIS GSTIN extra as per Government Rule
5.3-IS: 2386 (P-1)(Combined elongation & flakiness index (coarse aggregate))	-	1000	20 % discount to BIS GSTIN extra as per Government Rule
5.2- TABLE-2- (vi) IS-2386 (P-2)(Total deleterious material (coarse aggregate))	-	1800	20 % discount to BIS GSTIN extra as per Government Rule
5.2- TABLE-2- (iv) IS-2386 (P-2)(Soft fragments (coarse aggregate))	-	0	20 % discount to BIS GSTIN extra as per Government Rule
5.2- TABLE-2- (iii) IS-2386 (P-1)(Material fine aggregater than 75 micron (coarse aggregate))	-	0	20 % discount to BIS GSTIN extra as per Government Rule
5.2- TABLE-2- (ii) IS-2386 (P-2)(Clay lumps (coarse aggregate ))	-	0	20 % discount to BIS GSTIN extra as per Government Rule
5.2- TABLE-2- (i) IS-2386 (P-2)(Coal and Lignite (coarse aggregate ))	-	0	20 % discount to BIS GSTIN extra as per Government Rule
5.6-IS: 2386 (P-7)(Alkali Aggregate Reaction (coarse aggregate))	-	1800	20 % discount to BIS GSTIN extra as per Government Rule
Clause 5.7- Table 3 (i) (TotalAlkali content as Na2O equivalent )	-	1000	20 % discount to BIS GSTIN extra as per Government Rule
Clause 5.1(General)	-	0	20 % discount to BIS GSTIN extra as per Government Rule

12 Sep, 2028

-
-

12213

Hindustaan Testing Solutions LLP, Ambala

9122136

IS 15380 (2003)

Moulded Raised High Density Fibre (HDF) Panel Doors -

Heavy & Light Duty

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5, Table-1(dimension )	-	400	Testing charges applicable for only Raised fibre board skin 20 % discount to BIS GSTIN extra as per govt rule
7.1(Heavy duty (Construction))	-	0	20 % discount to BIS GSTIN extra as per govt rule
7.2(Light duty)	-	0	20 % discount to BIS GSTIN extra as per govt rule
7.3(Empanelment)	-	25	20 % discount to BIS GSTIN extra as per govt rule
7.4(Lipping )	-	25	20 % discount to BIS GSTIN extra as per govt rule
7.5(rebating )	-	25	20 % discount to BIS GSTIN extra as per govt rule
11.1(Dimension and squareness test)	-	400	20 % discount to BIS GSTIN extra as per govt rule
11.2(General flatness test)	-	750	20 % discount to BIS GSTIN extra as per govt rule
11.3(low Planeness Teat)	-	750	20 % discount to BIS GSTIN extra as per govt rule
11.4(Impact Indentation Test)	-	750	20 % discount to BIS GSTIN extra as per govt rule
11.5(Flexure Test)	-	750	20 % discount to BIS GSTIN extra as per govt rule
11.6(edge loading test)	-	750	20 % discount to BIS GSTIN extra as per govt rule
11.7(shock resistance test)	-	750	20 % discount to BIS GSTIN extra as per govt rule
11.8(Buckling Test)	-	750	20 % discount to BIS GSTIN extra as per govt rule
11.9(slamming Test)	-	750	20 % discount to BIS GSTIN extra as per govt rule
11.1(misuse test)	-	750	20 % discount to BIS GSTIN extra as per govt rule
11.11(varying humidity test)	-	2100	20 % discount to BIS GSTIN extra as per govt rule
11.12(end immersion test)	-	1600	20 % discount to BIS GSTIN extra as per govt rule
11.13(glue adhesion test)	-	800	20 % discount to BIS GSTIN extra as per govt rule
11.14(screw withdrawal resistance test)	-	850	20 % discount to BIS GSTIN extra as per Government Rule
Clause 6.2(Moisture content)	-	600	Testing charges applicable for only Raised fibre board skin 20 % discount to BIS GSTIN extra as per govt rule
Clause 6.2(Formaldehyde emission)	-	2000	Testing charges applicable for only Raised fibre board skin (Complete testing charges for Raised fibre board skin=11000) 20 % discount to BIS GSTIN extra as per govt rule
9(workmanship and finish)	-	25	20 % discount to BIS GSTIN extra as per govt rule

12 Sep, 2028

-
-

12214

Hindustaan Testing Solutions LLP, Ambala

9122136

IS 3564 (1995)

Hydraulically Regulated Door Closers -Specification

Type A & B

17000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11(Marking)	-	0	Testing charges without materials test (materials test excluded in the scope) 20 % discount to BIS GSTIN extra as per Government Rule
12(Packing)	-	0	20 % discount to BIS GSTIN extra as per Government Rule
13(Accessories)	-	500	20 % discount to BIS GSTIN extra as per Government Rule
6(Nominal Sizes)	-	0	20 % discount to BIS GSTIN extra as per Government Rule
8(Essential Requirements)	-	1500	20 % discount to BIS GSTIN extra as per Government Rule
9(Finish)	-	0	20 % discount to BIS GSTIN extra as per Government Rule
10Annex B(Test)	-	0	20 % discount to BIS GSTIN extra as per Government Rule
B-1.4(c) Performance Requirements)	-	2000	20 % discount to BIS GSTIN extra as per Government Rule
B-1.5(d) Endurance Test)	-	12000	20 % discount to BIS GSTIN extra as per Government Rule
B-1.2(a) Visual Inspection)	-	500	20 % discount to BIS GSTIN extra as per Government Rule
B-1.3(b) Surface)	-	500	20 % discount to BIS GSTIN extra as per Government Rule

12 Sep, 2028

-
(Except Material test )

12215

Hindustaan Testing Solutions LLP, Ambala

9122136

IS 14587 (1998)

Prelaminated Medium Density Fibre Board -specification

Exterior & Interior/Grade I/Grade II/Type I-IV

17100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Dimensions and tolerances)	-	600	(For Exterior Grade-Rs. 17100 & Interior Grade- Rs.14100) 20 % discount to BIS GSTIN extra as per Government Rule
10.2, Table-1(Test for Density)	-	600	20 % discount to BIS GSTIN extra as per Government Rule
10.4, Table-1(Test for Water Absorption)	-	1200	20 % discount to BIS GSTIN extra as per Government Rule
10.5(test for swelling in water)	-	1200	20 % discount to BIS GSTIN extra as per Government Rule
10.6(test for modulis of rupture)	-	1000	20 % discount to BIS GSTIN extra as per Government Rule
10.7(Test for tensile strength perpendicular to Surface)	-	1000	20 % discount to BIS GSTIN extra as per Government Rule
10.8(Test for tensile strength perpendicular to Surface after ageing )	-	3000	20 % discount to BIS GSTIN extra as per Government Rule
10.9(test screw withdrawal strength)	-	2000	20 % discount to BIS GSTIN extra as per Government Rule
10.1(test for surface abrasion resistance)	-	1500	20 % discount to BIS GSTIN extra as per Government Rule
10.11(test for resistance to steam)	-	600	20 % discount to BIS GSTIN extra as per Government Rule
10.12(test for resistance to crack)	-	600	20 % discount to BIS GSTIN extra as per Government Rule
10.13(test for resistance to cigarette burn)	-	600	20 % discount to BIS GSTIN extra as per Government Rule
10.14(test for resistance to stain)	-	600	20 % discount to BIS GSTIN extra as per Government Rule

12 Sep, 2028

-
-

12216

Hindustaan Testing Solutions LLP, Ambala

9122136

IS 12823 (2015)

Prelaminated Particle Boards from Wood and other Lignocellulosic Material - Specification ( First Revision )

Exterior & Interior/Grade I/Grade II/Type I-IV

17100 View breakup
Rs.17100/- for exterior grade, Gr-1 & Rs.14100/- for interior grade, Gr-2

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4(Grades & Types)	-	0	(For Exterior Grade-Rs. 17100 & Interior Grade- Rs.14100) 20 % discount to BIS GSTIN extra as per Government Rule
Cl 6(Manufacture)	-	0	20 % discount to BIS GSTIN extra as per Government Rule
Cl 7(Finish)	-	0	20 % discount to BIS GSTIN extra as per Government Rule
Cl 8(Dimensions & Tolerances)	-	600	20 % discount to BIS GSTIN extra as per Government Rule
Cl 10.2(Test For Density)	-	600	20 % discount to BIS GSTIN extra as per Government Rule
Cl 10.3(Test For Moisture Content)	-	600	20 % discount to BIS GSTIN extra as per Government Rule
Cl 10.4(For Water AbsorptionTest )	-	1200	20 % discount to BIS GSTIN extra as per Government Rule
Cl 10.5(For Swelling in water Test )	-	1200	20 % discount to BIS GSTIN extra as per Government Rule
Cl 10.6(Tesr For Modulus Of Elasticity & Mudulus Of Rupture)	-	1000	20 % discount to BIS GSTIN extra as per Government Rule
Cl 10.7(For Determination of Tensile Strength Perpendicular to Surface)	-	1000	20 % discount to BIS GSTIN extra as per Government Rule
Cl 10.8(For Determination of Tensile Strength Perpendicular to Surface After Ageing Test)	-	3000	20 % discount to BIS GSTIN extra as per Government Rule
Cl 10.9(Test For Screw Withdrawal Strength)	-	2000	20 % discount to BIS GSTIN extra as per Government Rule
Cl 10.10 & Annex C( Test For Abrasion Resistance)	-	1500	20 % discount to BIS GSTIN extra as per Government Rule
Cl 10.11 & Annex D( Test For Resistance to Steam)	-	600	20 % discount to BIS GSTIN extra as per Government Rule
Cl 10.12 & Annex E( Test For Crack Resistance)	-	600	20 % discount to BIS GSTIN extra as per Government Rule
Cl 10.13 & Annex F( Test For Resistance to Cigarette Burn)	-	600	20 % discount to BIS GSTIN extra as per Government Rule
Cl 10.14 & Annex G( Test For Resistance to Stain)	-	600	20 % discount to BIS GSTIN extra as per Government Rule

12 Sep, 2028

-
Revised IS 12823:2015 included w.e.f. 15.10.2019

12217

Hindustaan Testing Solutions LLP, Ambala

9122136

IS 3087 (2005)

Practicle boards of wood and other lingnocellulosic materials (medium density) for general purposes -Specification

Interior & Exterior/FPS/FPT-1/FPT-2/XPS/XPT

14700 View breakup
Rs.14700/- (for exterior Grade, Grade-1), Rs.11700/- (for interior grade, Grade-2)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1 (i) Table 1(Density Variation (Flat Pressed Single Layer))	-	600	(For Exterior Grade-Rs.14700, Interior grade-11700) 20 % discount to BIS GSTIN extra as per Government Rule
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Single Layer))	-	400	20 % discount to BIS GSTIN extra as per Government Rule
1 (ii) Table 1 (b)(Water absorption, 24h soacking (Flat Pressed Single Layer))	-	800	20 % discount to BIS GSTIN extra as per Government Rule
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Single Layer))	-	500	20 % discount to BIS GSTIN extra as per Government Rule
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Single Layer))	-	500	20 % discount to BIS GSTIN extra as per Government Rule
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Single Layer))	-	1500	20 % discount to BIS GSTIN extra as per Government Rule
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Single Layer))	-	250	20 % discount to BIS GSTIN extra as per Government Rule
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Single Layer))	-	250	20 % discount to BIS GSTIN extra as per Government Rule
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Single Layer))	-	250	20 % discount to BIS GSTIN extra as per Government Rule
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Single Layer))	-	250	20 % discount to BIS GSTIN extra as per Government Rule
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Flat Pressed Single Layer))	-	1000	20 % discount to BIS GSTIN extra as per Government Rule
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Flat Pressed Single Layer))	-	1000	C20 % discount to BIS GSTIN extra as per Government Rule
1 (i) Table 1(Density Variation (Flat Pressed Three Layer grade 1))	-	600	20 % discount to BIS GSTIN extra as per Government Rule
1 (i) Table 1(Density Variation (Flat Pressed Three Layer grade 2))	-	600	20 % discount to BIS GSTIN extra as per Government Rule
1 (i) Table 1(Density Variation (Extrusion Pressed Solids) XPS)	-	600	20 % discount to BIS GSTIN extra as per Government Rule
1 (i) Table 1(Density Variation (Extrusion Pressed Tubular) XPS)	-	600	20 % discount to BIS GSTIN extra as per Government Rule
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Three Layer grade 1))	-	400	20 % discount to BIS GSTIN extra as per Government Rule
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Three Layer grade 2))	-	400	20 % discount to BIS GSTIN extra as per Government Rule
1 (ii) (a) Table 1(Water absorption, 2h soacking (Extrusion Pressed Solids) XPS)	-	400	20 % discount to BIS GSTIN extra as per Government Rule
1 (ii) (a) Table 1(Water absorption, 2h soacking (Extrusion Pressed Tubular) XPS)	-	400	20 % discount to BIS GSTIN extra as per Government Rule
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Flat Pressed Three Layer grade 1))	-	800	20 % discount to BIS GSTIN extra as per Government Rule
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Flat Pressed Three Layer grade 2))	-	800	20 % discount to BIS GSTIN extra as per Government Rule
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Extrusion Pressed Solids) XPS)	-	800	20 % discount to BIS GSTIN extra as per Government Rule
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Extrusion Pressed Tubular) XPS)	-	800	20 % discount to BIS GSTIN extra as per Government Rule
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Three Layer grade 1))	-	500	20 % discount to BIS GSTIN extra as per Government Rule
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Three Layer grade 2))	-	500	20 % discount to BIS GSTIN extra as per Government Rule
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Extrusion Pressed Solids) XPS)	-	500	20 % discount to BIS GSTIN extra as per Government Rule
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Extrusion Pressed Tubular) XPS)	-	500	20 % discount to BIS GSTIN extra as per Government Rule
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Single Layer))	-	500	20 % discount to BIS GSTIN extra as per Government Rule
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Three Layer grade 1))	-	500	20 % discount to BIS GSTIN extra as per Government Rule
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Three Layer grade 2))	-	500	20 % discount to BIS GSTIN extra as per Government Rule
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Extrusion Pressed Solids) XPS)	-	500	20 % discount to BIS GSTIN extra as per Government Rule
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Extrusion Pressed Tubular) XPS)	-	500	20 % discount to BIS GSTIN extra as per Government Rule
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Three Layer grade 1))	-	500	20 % discount to BIS GSTIN extra as per Government Rule
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Three Layer grade 2))	-	500	20 % discount to BIS GSTIN extra as per Government Rule
1 (iv) Table 1(Thickness swelling, Width (Extrusion Pressed Solids) XPS)	-	500	20 % discount to BIS GSTIN extra as per Government Rule
1 (iv) Table 1(Thickness swelling, Width (Extrusion Pressed Tubular) XPS)	-	500	20 % discount to BIS GSTIN extra as per Government Rule
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Three Layer grade 1))	-	1200	20 % discount to BIS GSTIN extra as per Government Rule
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Three Layer grade 2))	-	1200	20 % discount to BIS GSTIN extra as per Government Rule
1 (v) Table 1(Swelling in thickness due to surface absorption, (Extrusion Pressed Solids) XPS)	-	1200	20 % discount to BIS GSTIN extra as per Government Rule
1 (v) Table 1(Swelling in thickness due to surface absorption, (Extrusion Pressed Tubular) XPS)	-	1200	20 % discount to BIS GSTIN extra as per Government Rule
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Three Layer grade 1))	-	250	20 % discount to BIS GSTIN extra as per Government Rule
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Three Layer grade 1))	-	250	20 % discount to BIS GSTIN extra as per Government Rule
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Three Layer grade 2))	-	250	20 % discount to BIS GSTIN extra as per Government Rule
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Three Layer grade 2))	-	250	20 % discount to BIS GSTIN extra as per Government Rule
1 (vi) (a), Table 1(Modulus of rupture, Average (Extrusion Pressed Solids) XPS)	-	250	20 % discount to BIS GSTIN extra as per Government Rule
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Extrusion Pressed Solids) XPS)	-	250	20 % discount to BIS GSTIN extra as per Government Rule
1 (vi) (a), Table 1(Modulus of rupture, Average (Extrusion Pressed Tubular) XPS)	-	250	20 % discount to BIS GSTIN extra as per Government Rule
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Extrusion Pressed Tubular) XPT)	-	250	20 % discount to BIS GSTIN extra as per Government Rule
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Three Layer grade 1))	-	250	20 % discount to BIS GSTIN extra as per Government Rule
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Three Layer grade 1))	-	250	20 % discount to BIS GSTIN extra as per Government Rule
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Three Layer grade 2))	-	250	20 % discount to BIS GSTIN extra as per Government Rule
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Three Layer grade 2))	-	250	20 % discount to BIS GSTIN extra as per Government Rule
1 (vii) (a), Table 1(Modulus of elasticity, Average (Extrusion Pressed Solids) XPS)	-	250	20 % discount to BIS GSTIN extra as per Government Rule
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Extrusion Pressed Solids) XPS)	-	250	20 % discount to BIS GSTIN extra as per Government Rule
1 (vii) (a), Table 1(Modulus of elasticity, Average (Extrusion Pressed Tubular) XPT)	-	250	20 % discount to BIS GSTIN extra as per Government Rule
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Extrusion Pressed Tubular) XPT)	-	250	20 % discount to BIS GSTIN extra as per Government Rule
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface,Upto 20mm thickness (Flat Pressed Three Layer grade 1))	-	1000	20 % discount to BIS GSTIN extra as per Government Rule
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Flat Pressed Three Layer grade 2))	-	1000	20 % discount to BIS GSTIN extra as per Government Rule
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Extrusion Pressed Solids) XPS)	-	1000	20 % discount to BIS GSTIN extra as per Government Rule
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Extrusion Pressed Tubular) XPT)	-	1000	20 % discount to BIS GSTIN extra as per Government Rule
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface,Above 20mm thickness (Flat Pressed Three Layer grade 1))	-	1000	20 % discount to BIS GSTIN extra as per Government Rule
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Flat Pressed Three Layer grade 2))	-	1000	20 % discount to BIS GSTIN extra as per Government Rule
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Extrusion Pressed Solids) XPS)	-	1000	20 % discount to BIS GSTIN extra as per Government Rule
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Extrusion Pressed Tubular) XPT)	-	1000	20 % discount to BIS GSTIN extra as per Government Rule
7(Finish)	-	0	20 % discount to BIS GSTIN extra as per Government Rule
8.3(Dimensional Tolerances)	-	600	20 % discount to BIS GSTIN extra as per Government Rule
11.10(screw withdrawal strength)	-	2000	20 % discount to BIS GSTIN extra as per Government Rule
9.2, 11.4(Moisture content)	-	600	20 % discount to BIS GSTIN extra as per Government Rule

12 Sep, 2028

-
-

12218

Hindustaan Testing Solutions LLP, Ambala

9122136

IS 848 (2006)

Synthetic resin adhesives for plywood (Phenolic And Aminoplastic) - Specification (Second Revision)

MR-BWR-BWP

8000 View breakup
For MR Rs.2000/- (without cyclic test) & Rs.7200/- (with cyclic test) For BWR & BWP Rs.2000/- (without cyclic test) & Rs.8000/- (with cyclic test)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4 Table (i)(BWP (BOiling WaterProof))	-	6000	BWP-8000 (with cyclic test) & 2000 without cyclic test BWR-8000 (with cyclic test) & 2000 without cyclic test MR-7200 (with cyclic test) & 2000 without cyclic test 20 % discount to BIS GSTIN extra as per Government Rule
4 Table (i)(BWR (Boiling Water Resistant))	-	6000	20 % discount to BIS GSTIN extra as per Government Rule
4 Table (i)(MR (Moisture Ressistant))	-	5200	20 % discount to BIS GSTIN extra as per Government Rule
5,7.4(Keeping Quality (Resistance to heat Polymerization))	-	0	20 % discount to BIS GSTIN extra as per Government Rule
7.4(Acidity and Alkalinity ( pH))	-	2000	20 % discount to BIS GSTIN extra as per Government Rule

12 Sep, 2028

-
-

12219

Hindustaan Testing Solutions LLP, Ambala

9122136

IS 1328 (1996)

Veneered Decorative Plywood -Specification

MR-BWR

4700 View breakup
Rs.4700/- for MR Grade & for BWR Grade

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Grade - For BWR)	-	0	20 % discount to BIS GSTIN extra as per Government Rule
4.1(Grade - For MR)	-	0	20 % discount to BIS GSTIN extra as per Government Rule
4.2(Type - For Type 1)	-	0	20 % discount to BIS GSTIN extra as per Government Rule
4.2(Type - For Type 2)	-	0	20 % discount to BIS GSTIN extra as per Government Rule
7.1.1(Requirements - Open splits, checks or open joints - For Type 1 - Cl. 7.1.1)	-	200	20 % discount to BIS GSTIN extra as per Government Rule
7.2.1(Requirements - Open splits, checks or open joints - For Type 2 - Cl. 7.2.1)	-	200	20 % discount to BIS GSTIN extra as per Government Rule
7.1.2(Requirements - Other defects - For Type 1 - Cl. 7.1.2)	-	200	20 % discount to BIS GSTIN extra as per Government Rule
7.2.2(Requirements - Other defects - For Type 2 - Cl. 7.2.2.)	-	200	20 % discount to BIS GSTIN extra as per Government Rule
7.1.3(Requirements - Other Charcteristics and Manufacturing Defects - For Type 1 - Cl. 7.1.3)	-	200	20 % discount to BIS GSTIN extra as per Government Rule
7.2.3(Requirements - Other Charcteristics and Manufacturing Defects - For Type 2 - Cl. 7.2.3)	-	200	20 % discount to BIS GSTIN extra as per Government Rule
8(Dimensions & Tolerances - Length - Cl. 8)	-	50	20 % discount to BIS GSTIN extra as per Government Rule
8(Dimensions & Tolerances - Width - Cl. 8)	-	50	20 % discount to BIS GSTIN extra as per Government Rule
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	100	20 % discount to BIS GSTIN extra as per Government Rule
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	100	20 % discount to BIS GSTIN extra as per Government Rule
8(Dimensions & Tolerances - Squareness - Annexure C)	-	100	20 % discount to BIS GSTIN extra as per Government Rule
9(Finish - Cl. 9.1, 8.3)	-	100	20 % discount to BIS GSTIN extra as per Government Rule
9(Finish - Cl. 9.2, 8.3)	-	100	20 % discount to BIS GSTIN extra as per Government Rule
11(Tests - Moisture Content - Part 1 of IS 1734)	-	400	20 % discount to BIS GSTIN extra as per Government Rule
11(Tests - Water Resistance Test - Cl. 11.1.2.1 [for MR Grade])	-	2000	20 % discount to BIS GSTIN extra as per Government Rule
11(Tests - Water Resistance Test - Cl. 11.1.2.2 [for BWR Grade])	-	2000	20 % discount to BIS GSTIN extra as per Government Rule For Static Bending Strength test Rs. 1300 included in complete testing charge

12 Sep, 2028

-
-

12220

Hindustaan Testing Solutions LLP, Ambala

9122136

IS 2202 : Part 1 (1999)

Wooden flush door shutters (Solid Core Type) - Specification: Part 1 plywood face panels (Sixth Revision)

BWP

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.2(Plywood)	-	20	20 % discount to BIS
9.2(Workmanship & finish - IS 2202(Pt-1))	-	20	20 % discount to BIS
9.3(Workmanship & finish - IS 2202(Pt-1))	-	20	20 % discount to BIS
11.1(Height - IS 4020 (Pt-2))	-	50	20 % discount to BIS
11.1(Width- IS 4020 (Pt-2))	-	20	20 % discount to BIS
11.1(Thickness - IS 4020 (Pt-2))	-	100	20 % discount to BIS
11.1( Squareness Test - IS 4020 (Pt-2))	-	100	20 % discount to BIS
11.1(Variation in thickness - IS 4020 (Pt-2))	-	40	20 % discount to BIS
11.3(Depth of deviation - IS 4020(Pt-4))	-	750	20 % discount to BIS
11.2( Twist, cupping & wrapping - IS 4020 (Pt-3))	-	400	20 % discount to BIS
11.4(Impact Indentation Test - IS 4020(Pt-5))	-	650	20 % discount to BIS
11.4(Depth of indentation - IS 4020(Pt-5))	-	100	20 % discount to BIS
11.5(Deflection at maximum load - IS 4020(Pt-6))	-	650	20 % discount to BIS
11.5(Residual deflection - IS 4020(Pt-6))	-	100	20 % discount to BIS
11.6(Deflection of the edge at maximum load - IS 4020(Pt-7))	-	500	20 % discount to BIS
11.6(Residual deflection after removal of load - IS 4020(Pt-7))	-	100	20 % discount to BIS
11.6(Lateral buckling during loading - IS 4020(Pt-7))	-	100	20 % discount to BIS
11.6(Residual lateral buckling - IS 4020(Pt-7))	-	50	20 % discount to BIS
11.7(Shock Resistance Test -IS 4020(Pt-8))	-	500	20 % discount to BIS
11.7(Shock Resistance Test -IS 4020(Pt-8))	-	250	20 % discount to BIS
11.8(Buckling Test - IS 4020(Pt-9))	-	500	20 % discount to BIS
11.8(Initial deflection - IS 4020(Pt-9))	-	150	20 % discount to BIS
11.8(Residual deformation after 15 minutes of unloading - IS 4020(Pt-9))	-	100	20 % discount to BIS
11.9(Slamming Test - IS 4020(Pt-10))	-	750	20 % discount to BIS
11.1(Misuse Test - IS 4020(Pt-11))	-	750	20 % discount to BIS
11.11(Varying Humidity Test - IS 4020(Pt-12))	-	1500	20 % discount to BIS
11.11(Maximum departure from the general planeness - IS 4020(Pt-12))	-	300	20 % discount to BIS
11.11(The recovery of the original size after subjecting the door to high and low humidity- IS 4020(Pt-12))	-	300	20 % discount to BIS
11.12(End Immersion Test - IS 4020(Pt-13))	-	1600	20 % discount to BIS
11.13(Knife Test - IS 4020(Pt-14))	-	400	20 % discount to BIS
11.14(Glue Adhesion Test - IS 4020(Pt-15))	-	800	20 % discount to BIS
11.15(Screw Withdrawal Resistance test - IS 4020 (Pt-16))	-	400	20 % discount to BIS
11.15(Screw Withdrawal Strength - IS 4020 (Pt-16))	-	400	20 % discount to BIS

12 Sep, 2028

-
-

12221

Hindustaan Testing Solutions LLP, Ambala

9122136

IS 710 (2010)

Marine plywood - Specification (Second Revision)

BWP

12600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(DIMENSIONS)	-	50	20 % discount to BIS
6.1(DIMENSIONS)	-	50	20 % discount to BIS
6.2(DIMENSIONS)	-	80	20 % discount to BIS
6.3(DIMENSIONS)	-	80	20 % discount to BIS
6.3(DIMENSIONS)	-	80	20 % discount to BIS
7.1(WORKMANSHIP AND FINISH )	-	15	20 % discount to BIS
7.2(WORKMANSHIP AND FINISH )	-	15	20 % discount to BIS
7.3(WORKMANSHIP AND FINISH )	-	15	20 % discount to BIS
7.5(WORKMANSHIP AND FINISH )	-	15	20 % discount to BIS
9.1.1(MOISTURE CONTENT)	-	400	20 % discount to BIS
9.1.2 , 9.1.2.1(Glue Adhesion in Dry State)	-	600	20 % discount to BIS
9.1.2 , 9.1.2.2(Glue Adhesion in Dry State)	-	400	20 % discount to BIS
9.1.3 , 9.1.3.1.1(Water resistance test)	-	2100	20 % discount to BIS
9.1.5(Mycological test)	-	1800	20 % discount to BIS
9.1.5 , 9.1.3.1.1(Mycological test)	-	600	20 % discount to BIS
9.1.5 , 9.1.3.1.2(Mycological test)	-	400	20 % discount to BIS
9.1.4(Tensile strength)	-	1000	20 % discount to BIS
9.1.6 (Table 3)(Static bending strength)	-	750	20 % discount to BIS
9.1.6 (Table 3)(Static bending strength)	-	750	20 % discount to BIS
9.1.7 (Table 4)(Wet bending strength)	-	1000	20 % discount to BIS
9.1.7 (Table 4)(Wet bending strength)	-	1000	20 % discount to BIS
9.1.8(Retention of preservative)	-	1000	20 % discount to BIS
11.1(MARKING)	-	0	NA
11.2(MARKING)	-	0	NA
9.1.3 , 9.1.3.1.2(Water resistance test)	-	400	20 % discount to BIS

12 Sep, 2028

-
-

12222

Hindustaan Testing Solutions LLP, Ambala

9122136

IS 1659 (2004)

Block boards - Specification (Fourth Revision)

MR-BWP

6850 View breakup
For MR-Rs.6150/- For BWP-Rs.6850

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.3, 6.3.3, IS 303(Visual Inspection - Permissible Defects - IS 303 [test method for COMMERCIAL type])	-	400	(For MR Grade-6150 & BWP grade-6850) 20 % discount to BIS GSTIN extra as per govt rule
8.1.3, 6.3.3, IS 1328(Visual Inspection - Permissible Defects - IS 1328 [test method for DECORATIVE type])	-	400	20 % discount to BIS GSTIN extra as per govt rule
7.3(Dimensional Requirements - Length - 8.1.4)	-	50	20 % discount to BIS GSTIN extra as per govt rule
7.3(Dimensional Requirements - Width - 8.1.4)	-	50	20 % discount to BIS GSTIN extra as per govt rule
7.3(Dimensional Requirements - Thickness - Annexure E)	-	80	20 % discount to BIS GSTIN extra as per govt rule
7.3(Dimensional Requirements - Edge Straightness - Annexure D)	-	100	20 % discount to BIS GSTIN extra as per govt rule
7.3(Dimensional Requirements - Squareness - Annexure D)	-	100	20 % discount to BIS
7.3(Dimensional Requirements - Variation in thickness - Annexure E)	-	20	20 % discount to BIS GSTIN extra as per govt rule
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 90% RH - Annexure F)	-	300	20 % discount to BIS GSTIN extra as per govt rule
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 40% RH - Annexure F)	-	300	20 % discount to BIS GSTIN extra as per govt rule
9.2.1(Dimensional Changes caused by humidity - Change in Thickness - at 90% RH - Annexure F)	-	300	20 % discount to BIS GSTIN extra as per govt rule
9.2.1(Dimensional Changes caused by humidity - Change in thickness - at 40% RH - Annexure F)	-	300	20 % discount to BIS GSTIN extra as per govt rule
9.2.1(Dimensional Changes caused by humidity - Delamination - Annexure F)	-	100	20 % discount to BIS GSTIN extra as per govt rule
9.2.1(Dimensional Changes caused by humidity Change in local planeness - Annexure F)	-	150	20 % discount to BIS GSTIN extra as per govt rule
9.2.2 (Resistance to water - Annexure G, Annexure H [For BWP grade])	-	3300	20 % discount to BIS GSTIN extra as per govt rule
9.2.2 (Resistance to water - Annexure G, Annexure H [For MR Grade])	-	800	20 % discount to BIS GSTIN extra as per govt rule
9.2.4(Mycological Test [for MR grade only] - Annexure J)	-	1800	20 % discount to BIS GSTIN extra as per govt rule
9.2.3(Adhesion of Plies - Annexure H)	-	400	20 % discount to BIS GSTIN extra as per govt rule
9.2.5(Modulus of rupture - AVERAGE - Annexure K)	-	100	20 % discount to BIS GSTIN extra as per govt rule
9.2.5(Modulus of rupture - MINIMUM INDIVIDUAL - Annexure K)	-	150	20 % discount to BIS GSTIN extra as per govt rule
9.2.5(Modulus of elasticity - AVERAGE - Annexure K)	-	100	20 % discount to BIS GSTIN extra as per govt rule
9.2.5(Modulus of elasticity - MINIMUM INDIVIDUAL - Annexure K)	-	150	20 % discount to BIS GSTIN extra as per govt rule
9.2.6(Spot test - Annexure L)	-	400	20 % discount to BIS GSTIN extra as per govt rule
9.2.6 (mechanical)(Spot test - Annexure L)	-	400	20 % discount to BIS GSTIN extra as per govt rule
cl. 11(marking)	-	0	20 % discount to BIS GSTIN extra as per govt rule
cl. 11.1(marking - BIS certification marking)	-	0	20 % discount to BIS GSTIN extra as per govt rule

12 Sep, 2028

-
-

12223

Hindustaan Testing Solutions LLP, Ambala

9122136

IS 303 (1989)

Plywood for General Purposes -

MR-BWR

5400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Grade - For BWR grade)	-	0	For MR Grade-4900 & BWR Grade-5400 20% discount to BIS GSTIN extra as per govt rule
4(Grade - For MR grade)	-	0	20% discount to BIS GSTIN extra as per govt rule
5.1(Type - For AA Type)	-	0	20% discount to BIS GSTIN extra as per govt rule
5.1(Type - For AB Type)	-	0	20% discount to BIS GSTIN extra as per govt rule
5.1(Type - For BB Type)	-	0	20% discount to BIS GSTIN extra as per govt rule
5.2, Table 1, Table 2(Quality Requirements - Cl. 5.2)	-	300	20% discount to BIS GSTIN extra as per govt rule
9(Workmanship and Finish - Cl.9, 8.3, Annexure C)	-	50	20% discount to BIS GSTIN extra as per govt rule
9(Workmanship and Finish - Cl.9, 8.3, Annexure C)	-	50	20% discount to BIS GSTIN extra as per govt rule
8(Dimensions & Tolerances - Length - Cl. 8)	-	50	20% discount to BIS GSTIN extra as per govt rule
8(Dimensions & Tolerances - Width - Cl. 8)	-	50	20% discount to BIS GSTIN extra as per govt rule
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	100	20% discount to BIS GSTIN extra as per govt rule
8(Dimensions & Tolerances - Squareness - Annexure C)	-	100	20% discount to BIS GSTIN extra as per govt rule
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	100	20% discount to BIS GSTIN extra as per govt rule
11.3(Moisture Content - Part 1 of IS 1734)	-	400	20% discount to BIS GSTIN extra as per govt rule
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for BWR Grade])	-	3200	20% discount to BIS GSTIN extra as per govt rule
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for MR Grade])	-	800	20% discount to BIS GSTIN extra as per govt rule
11.2.2(Glue Adhesion - Mycological test - 11.2.2, Part 7 of IS 1734 [for MR Garde only])	-	1900	20% discount to BIS GSTIN extra as per govt rule
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	100	20% discount to BIS GSTIN extra as per govt rule
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	150	20% discount to BIS GSTIN extra as per govt rule
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	100	20% discount to BIS GSTIN extra as per govt rule
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	150	20% discount to BIS GSTIN extra as per govt rule
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	100	20% discount to BIS GSTIN extra as per govt rule
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	150	20% discount to BIS GSTIN extra as per govt rule
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	100	20% discount to BIS GSTIN extra as per govt rule
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	150	20% discount to BIS GSTIN extra as per govt rule
cl. 13.1(marking)	-	0	20% discount to BIS GSTIN extra as per govt rule
cl. 13.2(marking)	-	0	20% discount to BIS GSTIN extra as per govt rule

12 Sep, 2028

-
-

12224

Central Institute of Petrochemicals Engineering & Technology (CIPET), Chandrapur

7173804

IS 14333 (2022)

Polyethylene Pipes for Sewerage and Industrial Chemicals and Effluent ï¿½ Specification (First Revision)

OD up to 630 mm, PN2 to PN20 & PE63 to PE100

35894 View breakup
PE63 to PE100/PN2 to PN20/OD up to 630mm. Total = Rs. 30806/- Rs. 3825/- (Optional) Rs. 5931/- ( Raw Material)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.1,T2("Base Density (At 27°C Temp.)-IS 7328:2020 ")	-	1125	Test = Rs. 500, Specimen Preparation = Rs. 625
5.2.1,T2(Melt Flow Rate (At 190°C /5kg)-IS 2530:1963)	-	1100	-
5.2.1,T2(Thermal Stability(Oxidation Induction Time)-IS 4984:2016(Annexure-B))	-	2200	-
5.2.1,T2("Volatile Matter- IS 4984:2016 (Annexure-C)")	-	700	-
5.2.1,T2("Water Content-IS 4984:2016 (Annexure-D)")	-	700	-
6(Pipe Description - IS 14333-2022)	-	250	-
6.2(Colour- IS 14333-2022)	-	300	-
7.1(Visual Appearance- IS 14333-2022)	-	300	-
7.2(Length- IS 14333-2022)	-	300	-
7.4,T3 of IS 4984(Outside Diameter-IS 4984-2016)	-	250	-
7.4,T4 of IS 4984(wall Thickness-IS 4984-2016)	-	250	-
7.4,T3 of IS 4984(Ovality-IS 4984-2016)	-	250	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 27 oC , Test Period - 100 hrs.-IS 4984-2016 (Annexure-E))	-	4000	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 48 hrs.-IS 4984-2016 (Annexure-E))	-	1600	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 165 hrs.-IS 4984-2016 (Annexure-E))	-	4800	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 1000 hrs.-IS 4984-2016 (Annexure-E))	-	11000	-
8.1.2, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 48 hrs.-IS 4984-2016 (Annexure-E))	-	1600	-
8.2("Longitudinal Reversion Test - IS 4984-2016 (Annexure-F)")	-	900	Test = Rs. 700, Specimen Preparation = Rs. 200
8.3(Carbon black content- IS 2530-1963)	-	925	-
8.3(Carbon black content Dispersion- IS 2530-1963)	-	700	-
8.4(Melt Flow rate(Temperature - 190oC,Mass 5kg)-IS 2530-1963)	-	1100	-
8.5(Oxidation Induction Time -IS 4984:2016(Annexure-B))	-	2200	-
8.6(Density-IS 7328:2020)	-	500	-
8.7("Tensile Strength for Butt Fusion - IS 4984-2016 (Annexure-G)")	-	1600	Test = Rs. 1100, Specimen Preparation = Rs. 500
8.8,T5("Tensile - IS 4984-2016 (Annexure-H)")	-	1600	Test = Rs. 1100, Specimen Preparation = Rs. 500
8.8,T5("Elongation -IS 4984-2016 (Annexure-H)")	-	1100	-
8.9(Slow Crack Growth Rate{Internal Pressure creep Rupture test, Temperature - 80±1 oC , Test Pressure – 0.80MPa, Test Period - 500 hrs.-IS 4984-2016 (Annexure-E &J))	-	5500	-
7.3(Coiling- IS 14333-2022)	-	300	-

10 Sep, 2026

-
-

12225

Central Institute of Petrochemicals Engineering & Technology (CIPET), Chandrapur

7173804

IS 13592 (2013)

Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Soil and Waste Discharge System Inside and Outside Buiildings Including Ventilation and Rainwater System

Class A & B, DN 40 - 315 mm

35937 View breakup
For type-A/OD up to 315mm= Rs. 29775/- For type-B/OD up to 315mm.= Rs. 30600/

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5(Surface colour of the pipes shall be dark shade of grey)	-	250	-
Cl6.3(The composition shall be based on PVC resin having a K-value of 64 or greater when tested in accordance with IS 4669)	-	1100	-
Cl.7.1(Mean out side Diameter (For less than or equal to 40 mm- Average of 8 , For higher diameters up to 110 mm average of 6))	-	250	-
Cl.7.1(Outside Diameter at any point (Take 8 reading reported minimum, maximum))	-	250	-
Cl.7.1(Wall thickness "minimum,maximum" (Take 8 reading))	-	250	-
Cl.7.2(Pipes shall be supplied in nominal lengths of 2, 3, 4 or 6 metres either plain or with socket for solvent cementing/grooved socket. Tolerances on specified length shall be + 10 mm and – 0 mm.The nominal length of the pipe with socket for solvent cementing/grooved socket shall be as given in Fig. 1.)	-	250	-
Cl.7.3.1(Minimum wall thickness of socket on pipes shall be as given in Table 2 read with Fig. 2 and Fig. 3.)	-	250	-
Cl.7.3.2(Dimensions of sockets for solvent cementing and grooved sockets of pipes shall be as given in Tables 3 and 4 respectively, read with Fig. 2 and 3.)	-	250	-
Cl.8.1(The internal and external surface of the pipes shall be smooth and clean, and free from grooving and other defects. The end shall be clearly cut and shall be square with the axis of the pipe. The end may be chamfered on the plain side.)	-	300	-
Cl.8.2(When tested by the method described in IS 12235 (Part 5), a length of pipe sample of 200 ± 20 mm shall not alter in length by more than 5 percent. In the case of socket ended pipes, this test shall be carried out on the plain portion of pipe taken at least 100 mm away from the root of the socket.)	-	1000	Test= Rs. 700, Sample Preparation= Rs. 300
Cl8.3(This test shall be carried out for socket end pipes only. When tested by the method described in IS 12235 (Part 6), the test specimens shall not show blisters, excessive delamination or cracking or signs of weld line splitting.)	-	1000	Test= Rs. 700, Sample Preparation= Rs. 300
Cl.8.4(When determined in accordance with IS 12235 (Part 2), the vicat softening temperature of the specimen shall not be less than 79°C.)	-	1100	-
Cl.8.5(After the required period of exposure, the tensile strengths of two samples when tested as per IS 12235 (Part 13) shall not show difference of more than 20 percent of their initial tensile strengths)	-	23800	Natural Sunlight for 1600hrs = Rs. 3500 Effect on sunlight by weatherometer for 116hrs equivalent 1600hrs exposure (Optional = Rs. 20300
Cl. 9, IS 12235 Part 7(Resistance to Sulphuric Acid)	-	2500	Test= Rs. 2000, Sample Preparation= Rs. 500
Cl.10.1(When tested by method prescribed in IS 12235 (Part 9),the pipe shall have a true impact rate of not more than 10 percent. Mass of striker and height of fall shall be as per Annex A.)	-	1400	Test= Rs. 1100, Sample Preparation= Rs. 300
Cl.10.2(When determined in accordance with the method described in IS 12235 (Part 13), the tensile strength at break shall not be less than 45 MPa.)	-	2700	Tensile strength Before exposure & After exposure= Rs. 2 X 1100=2200, Sample Preparation= Rs. 500
Cl.10.3(The axial shrinkage shall not exceed 2 percent when determined in accordance with Annex B.)	-	700	-
Cl.11.(Jointing of solvent cementing joints is to be carried out using solvent conforming to IS 14182. Apply a pressure of 0.05 MPa for a period of 15 min and there should be no leakage at any joint.)	-	1000	-
Cl. 12, IS 12235 Part 11(Resistance to Di-Chloro-Methane)	-	1500	Test= Rs. 1000, Sample Preparation= Rs. 500
14(Marking)	-	300	-
8.6(Effect on Water Test)	-	3000	-

10 Sep, 2026

-
-

12226

Central Institute of Petrochemicals Engineering & Technology (CIPET), Chandrapur

7173804

IS 12786 (1989)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification

Class 1 to Class 3, PE-25 & OD up to 32 mm

12488 View breakup
For class 1 to class 3 PE 25/00 upto 32mm Rs. 12488/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.a (Potyethylene - higher olefins constituent )	-	2000	-
4.1.c.i (Density)	-	500	-
4.1.c.iii (Volatile matter - Annex B )	-	700	-
4.1.c & 4.2.a (Carbon Black content - IS 2530 : 1963)	-	1850	Raw Material = Rs. 925, Pipe = Rs. 925
4.2.b (The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	1400	Raw Material = Rs. 700, Pipe = Rs. 700
5 and Table 1(DIMENSIONS OF PIPES - outside diameters)	-	250	-
5 and Table 1(DIMENSIONS OF PIPES - wall thickness shall)	-	250	-
6.1(Visual Appearance)	-	300	-
7.1 Table-2 (b)Acceptance Test for 01 hour at 20°C & 6.9MPa induced stress)	-	1000	-
7.1 Table-2 (Hydraulic Characteristics a)Quality Test for 100 hours at 70°C & 2.5.MPa induced stress. )	-	3000	-
7.2(Reversion Test)	-	900	Test = Rs. 700, Sample Preparation= Rs. 200
7.3(Tensile Test)	-	1300	Test = Rs. 1100, Sample Preparation= Rs. 200
7.3(Elongation at Break)	-	1100	-
7.4(SusceptibiIity to Environmental Stress)	-	1300	Test = Rs. 1100, Sample Preparation= Rs. 200
8.0 (8.1) (Supply of pipes )	-	300	-
9.0 (9.1)(Coiling )	-	300	-

10 Sep, 2026

-
Exclusion: Cl. 4.1.b (Potyethylene - anti-oxidant), Cl. 4.1.c.i (Density), Cl. 4.1.c.ii (Toluene extract - Annex A), Cl. 4.1.c & 4.2.a (Carbon Black content - IS 2530 : 1963)

12227

Central Institute of Petrochemicals Engineering & Technology (CIPET), Chandrapur

7173804

IS 12701 (1996)

Rotational moulded polyethylene water storage tanks - specification (First Revision)

Up to 3000Liters

16638 View breakup
Rs. 13375/- (upto 1500 Litres) Rs. 14050/- (above 1500 Litres)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(MATERIALS)	-	4000	Tank = Rs. 2000, Lid= Rs. 2000
4.2.1(Density)	-	500	-
4.2.2(MFR)	-	1100	-
4.2.3(Carbon Black Content )	-	1850	Tank= Rs. 925, Lid=Rs. 925
4.2.3(Carbon Dispersion Test)	-	1400	Tank= Rs. 700, Lid=Rs. 700
5(Types and Features )	-	500	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	500	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	250	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	250	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	250	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	250	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	250	-
5.4(Wall Thickness)	-	250	-
6.1(Finish)	-	300	-
7.1.1(Resistance to Deformation)	-	700	-
7.1.2(Resistance to Deformation)	-	700	-
7.2(Resistance to Impact)	-	1000	-
7.3(Test for Top Load Resistance)	-	900	-
7.4(Tensile Strength)	-	1600	Test = Rs. 1100, Sample Preparation= Rs. 500
7.5(Flexural Modulus)	-	1600	Test = Rs. 1100, Sample Preparation= Rs. 500
7.6(overall Migration)	-	2000	Test = Rs. 1700, Sample Preparation= Rs. 300
5.4(Wall Thickness above effective height)	-	250	-
5.1 Table 1 (7)(Minimum Weight of Tank (Without Lid))	-	500	-
5.2 Table 2 (7)(Minimum Wall Thickness)	-	250	-
9.1(Lid Thickness)	-	250	-
9.2.1(Man-Hole and Hand-Hole Lids)	-	300	-
9.1(Man-Hole and Hand-Hole Lids)	-	300	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	500	-

10 Sep, 2026

-
-

12228

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 15907 (2010)

Agro textiles – High density polyethylene (HDPE) woven beds for vermiculture – Specification

102380.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3(Cord Beading - IS 15907)	-	500.00	-
4.1(Identification)	-	2000.00	-
4.1(Width)	-	500.00	-
4.1(Linear Density)	-	700.00	-
5.2.1(Lamination- IS 15907)	-	2000.00	-
5.2.1(Thickness of coating film- method A of IS 13162 (Part 3))	-	500.00	-
5.2.1(Lamination- IS 15907)	-	500.00	-
5.3.1(Construction- IS 15907)	-	500.00	-
5.3.1(Construction- IS 15907)	-	500.00	-
5.3.1(Construction- IS 15907)	-	2000.00	-
5.3.1(Construction- IS 15907)	-	2000.00	-
5.3.2(Construction- IS 15907)	-	500.00	-
5.3.2(Construction- IS 15907)	-	500.00	-
5.3.2(Construction- IS 15907)	-	500.00	-
5.3.2(Construction- IS 15907)	-	500.00	-
5.4(Bonding- IS 15907)	-	500.00	-
6- Table 1- SL.No (i)(Mass)	-	500.00	-
6- Table 1- SL.No (ii)(Breaking strength before UV exposure,warp - IS 1969 )	-	1800.00	Test Charge- 1300.00 SPECIMEN CHARGE- 500.00
6- Table 1- SL.No (ii)(Breaking strength before UV exposure,weft - IS 1969 )	-	1300.00	-
6- Table 1- SL.No (iv)(Retention of breaking strength after UV exposure, - Annex B of IS 15907 and IS 1969)	-	2600.00	-
6- Table 1- SL.No (v)(Welded seam strength before UV exposure- IS 1969)	-	1600.00	Test Charge- 1100.00 SPECIMEN CHARGE- 500.00
6- Table 1- SL.No (vi)(Welded seam strength after UV exposure- Annex B of IS 15907 and IS 1969)	-	1100.00	-
6- Table 1- SL.No (vii)(Tear strength, Warp - Method A2 of IS 7016 (Part 3))	-	1600.00	Test Charge- 1100.00 SPECIMEN CHARGE- 500.00
6- Table 1- SL.No (vii)(Tear strength, Weft - Method A2 of IS 7016 (Part 3))	-	1100.00	-
6- Table 1- SL.No (viii)(Puncture strength - Annex C of IS 15907)	-	1100.00	-
6- Table 1- SL.No (ix)(Environmental stress cracking test - Annex D of IS 15907)	-	2000.00	Test Charge- 1500.00 SPECIMEN CHARGE- 500.00
6- Table 1- SL.No (x)(Resistance to chemicals, change in the mass - Annex E of IS 15907)	-	2500.00	Test Charge- 2000.00 SPECIMEN CHARGE- 500.00
6- Table 1- SL.No (xi)(Colour fastness to artificial light -IS 2454)	-	19850.00	TEST CHARGE- 850 SPECIMEN CONDITIONING CHARGE- 19000.00
6- Table 1- SL.No (xii)(Bursting pressure-IS 1966)	-	1600.00	Test Charge- 1100.00 SPECIMEN CHARGE- 500.00
6.1(Length -IS 15907)	-	500.00	-
6.1(Width - IS 15907)	-	500.00	-
6.1(Height - IS 15907)	-	500.00	-
6.2(Water Proofness,IS 7941)	-	1500.00	Test Charge- 1000.00 SPECIMEN CHARGE- 500.00
6.2(Water Proofness, IS 7940)	-	1000.00	-
5.1(MANUFACTURE- IS 15907)	-	0.00	-
5.2.2(Lamination- IS 15907)	-	0.00	-
5.2.2(Lamination- IS 15907)	-	0.00	-
5.2.2(coating thickness of the sandwich lamination- method A of IS 13162 (Part 3))	-	0.00	-
5.3.1(The width of the hem - IS 15907)	-	0.00	-
5.3.1(Construction- IS 15907)	-	0.00	-
5.3.1(Construction- IS 15907)	-	0.00	-
5.3.1(Construction- IS 15907)	-	0.00	-
5.3.2(Finished width of pocket - IS 15907)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
6- Table 1- SL.No (iii)(Elongation at break of fabric- IS 1969)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.

24 Apr, 2027

-
-

12229

LPG Equipment Research Centre (LERC), Bengaluru

6141034

IS 9798 (2013)

Low pressure regulators for use with liquefied petroleum gas (LPG) - Specification (Second Revision)

23128 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.4(SOUNDNESS)	-	23128		-

-
-

12230

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 10889 (2004)

High density polyethylene films (First Revision)

GRADE 1 & GRADE 2

8925.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.1(Appearance)	-	500.00	-
6.1.2(Film Form)	-	0.00	APPERANCE, FILM FORM & ODOUR HAVE SINGLE CHARGE.
6.1.3(Odour )	-	0.00	APPERANCE, FILM FORM & ODOUR HAVE SINGLE CHARGE.
6.1.4(Density)	-	700.00	-
6.1.5(Melt Flow Rate)	-	1100.00	-
6.1.6(Black Film)	-	1625.00	1. CBC- 925.00 2. CBD - 700.00
6.2.1, Table 1(Nominal Thickness)	-	500.00	-
6.2.2, Table 2(Nominal Width)	-	500.00	-
6.2.1, Table 1(Tolerance, Percent Grade 1 and 2)	-	0.00	-
6.2.2, Table 2(Tolerance, Percent Grade 1 and 2)	-	0.00	-
6.3, Table 3(Yield Tolerance)	-	600.00	-
6.4.1(Tensile Strength at Break)	-	2600.00	-
6.4.3(Impact Resistance (Falling Dart))	-	850.00	-
4.0(Grades)	-	0.00	Testing charges for this parameter already taken.
5.1(Materials)	-	0.00	Testing charges for this parameter already taken.
5.2(Black Compound)	-	0.00	Testing charges for this parameter already taken.
6.3, Table 3(Tolerance, Percent Grade 1 and 2)	-	0.00	Testing charges for this parameter already taken.
6.4.1, Table 4(Direction)	-	0.00	Testing charges for this parameter already taken.
6.4.1, Table 4(Grade 1 and 2)	-	0.00	Testing charges for this parameter already taken.
6.4.2, Table 5(Direction)	-	0.00	Testing charges for this parameter already taken.
6.4.2, Table 5(Elongation at Break, Percent Grade 1 and 2)	-	0.00	Testing charges for this parameter already taken.
6.4.2(Elongation at Break)	-	0.00	Testing charges for this parameter already taken.
6.4.3, Table 6(Average Thickness of Film)	-	0.00	Testing charges for this parameter already taken.
6.4.3, Table 6(Impact Failure Load)	-	0.00	Testing charges for this parameter already taken.

24 Apr, 2027

-
-

12231

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 16208 (2015)

Textiles - High density polyethylene (HDPE)/polypropylene (PP) woven sacks for packaging 10 kg, 15 kg, 20 kg, 25 kg and 30 kg foodgrains - Specification

TYPE I, TYPE -II, TYPE III, TYPE IV TYPE V

21430.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Raw Material)	-	1050.00	Optional (Applicable on Raw material)
4.2(Tapes – Width IS 6192 and IS 11197)	-	500.00	Optional (Applicable on Tape)
4.3(Sacks)	-	500.00	-
4.4 and Table 1 i(Capacity)	-	500.00	-
5.2 and Table 1 ii a(Dimensions Inside Length)	-	500.00	-
5.2 and Table 1 ii b(Dimensions Inside Width)	-	0.00	LENGTH & WIDTH HAVE SINGLE CHARGE.
5.2 and Table 1 iii(Ends per dm )	-	500.00	-
5.2 and Table 1 iv(Picks per dm )	-	500.00	-
5.1 and Table 1 v(Mass of sack )	-	500.00	-
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	1100.00	-
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise )	-	1100.00	-
5.2 and Table 1 vi(Breaking strength of bottom seam )	-	1100.00	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	12380.00	1. UV EXPOSURE - 10180.00 2. BREAKING STRENGTH (LENGTH WISE) - 1100.00 3. BREAKING STRENGTH (WIDTH WISE) - 1100.00
5.2 and Table 1 x(Ash content )	-	1200.00	-
3(TYPES)	-	0.00	-
4.2(Tapes – Linear Density )	-	0.00	-
4.2(Construction)	-	0.00	-
4.3.1(Bottom Seam)	-	0.00	-
4.3.1( The two rows of stitches shall be separated from each other)	-	0.00	-
4.3.1( The outer stitch)	-	0.00	-
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	0.00	-
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	0.00	-
4.3.1(The number of stitches/dm)	-	0.00	-
4.3.2(Mouth)	-	0.00	-
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise)	-	0.00	-
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise )	-	0.00	-
3(TYPES)	-	0.00	-
4.1(Raw Material)	-	0.00	-
4.2(Tapes – Width IS 6192 and IS 11197)	-	0.00	-
4.2(Tapes – Linear Density )	-	0.00	-
4.2(Construction)	-	0.00	-
4.3(Sacks)	-	0.00	-
4.3.1(Bottom Seam)	-	0.00	-
4.3.1( The two rows of stitches shall be separated from each other)	-	0.00	-
4.3.1( The outer stitch)	-	0.00	-
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	0.00	-
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	0.00	-
4.3.1(The number of stitches/dm)	-	0.00	-
4.3.2(Mouth)	-	0.00	-
4.4 and Table 1 i(Capacity)	-	0.00	-
5.2 and Table 1 ii a(Dimensions Inside Length)	-	0.00	-
5.2 and Table 1 ii b(Dimensions Inside Width)	-	0.00	-
5.2 and Table 1 iii(Ends per dm )	-	0.00	-
5.2 and Table 1 iv(Picks per dm )	-	0.00	-
5.1 and Table 1 v(Mass of sack )	-	0.00	-
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	0.00	-
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise )	-	0.00	-
5.2 and Table 1 vi(Breaking strength of bottom seam )	-	0.00	-
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise)	-	0.00	-
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise )	-	0.00	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	0.00	-
5.2 and Table 1 x(Ash content )	-	0.00	-

24 Apr, 2027

-
-

12232

Central Institute of Petrochemicals Engineering & Technology (CIPET), Chandrapur

7173804

IS 4985 (2021)

UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES SPECIFICATION Fourth Revision

OD up to 630 mm & Class 1 to Class 6

35836 View breakup
For Plain Socket Ended = Rs. 18931/- For Sealing Ring Socket = Rs. 23319/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.1(VCM Content)	-	3000	-
Cl-7.1(Mean out side Diameter (For less than or equal to 40 mm- Average of 8 , For higher diameters up to 110 mm average of 6))	-	250	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	250	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. Variation)	-	250	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	250	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	250	-
7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum))	-	250	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	250	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum))	-	250	-
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	250	-
7.2.1(DIMENSIONS-Socket)	-	250	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	250	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum))	-	250	-
7.2.1.2(a)-Table 5(DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement)	-	250	-
7.2.1.2-Table 4(DIMENSIONS-Sockets for elastomeric sealing ring joints-Socket inner Diameter)	-	250	-
8(SEALING RINGS)	-	375	-
9.1(PIPE ENDS)	-	300	-
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	300	-
10.1(Colour)	-	300	-
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	575	-
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	1000	Test= Rs. 700, Sample Preparation= Rs. 300
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	1100	-
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	500	-
10.7(Sulphated Ash Content)	-	950	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	11000	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	850	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	11000	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	850	-
11.2(Resistance to External Blows at 0°C)	-	1300	Test= Rs.1100, Sample Preparation= Rs. 200
7.1.4(Length)	-	300	-
6.1.2(PVC Resin)	-	1100	-
13.1(Marking)	-	300	-
5(CLASSIFICATION OF PIPES)	-	300	-
7.1.3(mean outside diameter, outside diameter at any point, and wall thickness of plumbing pipes)	-	250	-
7.2.1.2b(Maximum inner diameter of groove)	-	250	-
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	850	-
10.3(Effect on Water Test)	-	3000	-

10 Sep, 2026

-
-

12233

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 8058 (2018)

Pyridine - Specification (First Revision)

Grade 1, Grade 2, Grade 3

16000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Description)	-	500	-
4.2(Solubility)	-	1000	-
4.3(Identity and Purity - (Annex B))	-	2000	-
4.4 - Table 1 - Sl No - i(Relative density at 250C/250C - Annex A)	-	1000	-
4.4 - Table 1 - Sl No - ii(Pyridine content - Annex B)	-	2000	-
4.4 - Table 1 - Sl No - iii(Boiling range at 760 mm Hg - Annex C)	-	1500	-
4.4 - Table 1 - Sl No - iv(Residue on evaporation - Annex D)	-	1000	-
4.4 - Table 1 - Sl No - v(Ammonium compounds (as NH4) - Annex E)	-	1000	-
4.4 - Table 1 - Sl No - vi(Chlorides (as Cl) - Annex G)	-	1000	-
4.4 - Table 1 - Sl No - vii(Copper (as Cu) - Annex H)	-	1000	-
4.4 - Table 1 - Sl No - viii(Oxidizable substances - Annex J)	-	1000	-
4.4 - Table 1 - Sl No - ix(Sulphates (as SO4) - Annex K)	-	1000	-
4.4 - Table 1 - Sl No - x(Moisture content - Annex L)	-	1000	-
4.4 - Table 1 - Sl No - xi(Colour, HU (Pt-Co scale) - IS 8768)	-	1000	-

31 Dec, 2026

-
Included w.e.f.26.12.2024

12234

Central Institute of Petrochemicals Engineering & Technology (CIPET), Chandrapur

7173804

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

OD up to 630 mm, PN2 to PN20 & PE63 to PE100.

42287 View breakup
Rs.32281/- Rs. 3285/- (Optional) Rs. 5931/- (Raw Material)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2(Density)	-	1125	Test= Rs. 500, Sample Preparation= Rs. 625
5.2(MFI @ 1900C/5.0 Kg)	-	1100	-
Table-2 (iii, iv)(Thermal Stability (Oxidation Induction Time), Volatile Matter)	-	2200	-
5.2(Volatile matter Content)	-	700	-
6.2(Colour)	-	250	-
6.2.1(6.1.1 Identification Stripes)	-	300	-
7.1(Visual Appearance)	-	300	-
7.2(Length)	-	250	-
Cl-7.4(Mean Outside Diameter (For upto 50 mm take 8 reading, above 50mm take 6 reading & average will be reported))	-	500	-
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	21400	1. 100 hr/27°C= Rs. 4000 2. 48 hr/80°C= Rs. 1600 3. 165 hr/80°C= Rs. 4800 4. 1000 hr/80°C= Rs. 11000
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	1600	-
8.2(Longitudinal Reversion Test)	-	900	Test = Rs. 700, Sample Preparation=Rs. 200
Clause 8.3(Carbon Black content)	-	925	-
Cl. 8.3(Carbon Black Dispersion)	-	700	-
8.4( Melt Flow Rate)	-	1100	-
8.5 (Oxidation Induction Time)	-	2200	-
Clause 8.6(Overall migration (stimulate))	-	2000	Test=Rs. 1700, Sample Preparation= 300
8.7(Density)	-	500	-
8.8(Tensile Strength for Butt-fusion)	-	1600	Test= Rs.1100, Sample Preparation= Rs. 500
8.9 table-6(Elongation at Break)	-	1100	-
8.9,T6("Tensile - IS 4984-2016 (Annexure-H)")	-	1600	Test= Rs.1100, Sample Preparation= Rs. 500
8.10(Slow Crack Growth Rate)	-	5500	-
6, 6.1(PIPE DESCRIPTION)	-	250	-
6, 6.1.1(PIPE DESCRIPTION)	-	250	-
6, 6.1.2(PIPE DESCRIPTION)	-	250	-
6.1.3 (PIPE DESCRIPTION)	-	250	-
6.1.4(PIPE DESCRIPTION)	-	250	-
7.3(Coiling)	-	250	Not Applicable
5.3(c)(Carbon Black Master Batch)	-	925	Not Applicable, Raw material TC is required
5.3(d)(Carbon Black Master Batch)	-	0	Not Applicable, Raw material TC is required
5.3(Toluene Extract)	-	900	-
5.2(Polyethylene Resin)	-	700	-

10 Sep, 2026

-
Exclusion: Cl. 5.4 (Anti oxydent), Cl. 5.3 (a) (Carbon Black Master Batch), Cl. 5.3(b) (Carbon Black Master Batch), Cl. 5.3(e) (Carbon Black Master Batch), Cl. 7.3 (Coiling), Cl. 5.3(d) (Carbon Black Master Batch)

12235

POWERONIC TEST & RESEARCH CENTRE PRIVATE LIMITED, GREATER NOIDA

8170206

IS 17048 (2018)

Halogen free flame retardant (HFFR) cables for working voltages up to and including 1 100 Volts - Specification

up to and including 1100 Volt

194250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.1(Conductor)	-	2000	-
4.1.1 a) (Conductor : Material )	-	2000	-
5.1(Persulphate Test- IS 10810 (Part 4).)	-	2500	-
4.5.5, 11.3, 12.3, 13.6, 14.6(Overall Dimensions)	-	0	-
4.2.3,11.2, 12.2, 13.2(Thickness of insulation - Avearge : IS 10810 ( Part 6 ))	-	500	-
4.2.3, 11.2, 12.2, 13.2, 14.2(Thickness of insulation - miniumum : IS 10810 ( Part 6 ))	-	500	-
4.2.4(Insulation : Elongation ( Before ageing) -IS 10810 (Part 7))	-	1000	-
4.2.4(Insulation : Tensile stregth ( Before ageing)-IS 10810 (Part 7) )	-	1000	-
4.2.4(Insulation : Tensile stregth ( After ageing) - IS 10810 (Part 7) )	-	1200	-
4.2.4(Insulation : Elongation (after ageing) - IS 10810 (Part 7) )	-	1200	-
5.1(High Voltage Test (at Room Temperature))	-	2000	-
4.2.1, 11.2, 12.2, 13.2, 14.2(Insulation : Material )	-	0	-
5.4(Oxygen Index Test- IS 10810 (Part 58))	-	2000	-
5.5(Temperature Index-IS 10810 (Part 64).)	-	2500	-
4.2.5(Insulation : Elongation variation (after ageing) - IS 10810 (Part 7) )	-	1200	-
4.5.5, 13.4,14.4(Sheath : Elongation variation (after ageing) - IS 10810 (Part 7) )	-	1200	-
4.5.1,13.4, 14.4(Sheath : Compound )	-	0	-
5.7(Assessment of Halogen- Table 1 of Annex D)	-	34000	-
5.16(Cold Impact Test- IS 10810 (Part 21).)	-	3000	-
5.12(Hot Set Test- IS 10810 (Part 30).)	-	800	-
5.14(Ozone Resistance Test -IS 10810 (Part 13 ))	-	9000	-
5.11(Flame Retardant Test- IS 10810 (Part 61),)	-	5000	-
5.3(Flammability Test- IS 10810 (Part 53).)	-	5000	-
5.15(Cold Bend Test-IS 10810 (Part 20).)	-	2000	-
5.13(Water Immersion Test (Effect of Water on Sheath) : Elogation -IS 10810 (Part 7).)	-	2000	-
5.13(Water Immersion Test (Effect of Water on Sheath) : Tensile strength -IS 10810 (Part 7).)	-	2000	-
5.6(Smoke Density-IS 10810 (Part 63).)	-	9500	-
5.7 (b)(pH test (Assessment of halogen test))	-	0	-
5.7 (c)(Conductivity test (Assessment of halogen test))	-	0	-
5.7 (d)(Presence of fluorine test (Assessment of halogen test))	-	0	-
5.7 (e)(Fluorine content test (Assessment of halogen test))	-	0	-
4.2.5(Insulation : Tensile stregth variation ( After ageing) - IS 10810 (Part 7) )	-	1200	-
4.5.3,13.4, 14.4(Thickness of sheath - Average : IS 10810 (Part 6))	-	250	-
4.5.3,13.4, 14.4(Thickness of sheath - Minimum : IS 10810 (Part 6))	-	250	-
4.5.4, 13.4(Sheath : Tensile stregth ( Before ageing)-IS 10810 (Part 7) )	-	500	-
4.5.4,13.4(Sheath : Elongation ( Before ageing) -IS 10810 (Part 7))	-	500	-
4.5.4, 13.4, 14.4(Sheath : Elongation (after ageing) - IS 10810 (Part 7) )	-	1200	-
4.5.4, 13.4, 14.4(Sheath : Tensile stregth ( After ageing) - IS 10810 (Part 7) )	-	1200	-
Table 4(Copper Purity test)	-	3000	-
4.1.1 b) (Material : Seperator tape )	-	0	-
4.1.1 e) (Shape of conductor )	-	0	-
4.1.1 f) (Nominal size of conductor )	-	0	-
4.5.5, 13.4, 14.4(Sheath : Tensile stregth variation ( After ageing) - IS 10810 (Part 7) )	-	0	-

11 Apr, 2028

-
-

12236

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 12818 (2010)

Unplasticized polyvinyl chloride (Pvc - U) screen and casing pipes for bore/tubewells - Specification (Second Revision)

35 TO 400 MM

12600.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.2 and Table 5, 6 & 7 Fig 1B(DIMENSIONS - Casing Pipes)	-	1500.00	Test Charge- 1000.00 specimen Charge- 500.00
8.1 to 8.3 and Table 11 &12 Fig 3A & 4A(THREADING OF SCREEN ANDCASING PIPES. IS 554.)	-	500.00	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	500.00	-
8.4(Sealing rings - Hardness)	-	500.00	-
9.1( Visual Appearance)	-	500.00	-
9.2(Internal Diameter)	-	500.00	-
9.3(Density IS 12235 (Part 14))	-	700.00	-
9.4 and Table 14(Resistance to External Blows at 0 ?C IS 12235 (Part 9))	-	1500.00	Test Charge- 1000.00 SPECIMEN CHARGES- 500.00
9.5(Tensile Strength IS 12235(Part 13))	-	1800.00	Test Charge- 1300.00 SPECIMEN CHARGES- 500.00
9.6(Vicat Softening Temperature IS 12235 (Part 2).)	-	1100.00	-
9.7(Effect on Water a) Lead (first extraction) b) Lead (Third extraction) c) Dialkyl Tin C4 & higher homologues measured as Tin (Third extraction) d) Cadmium (All three extracts) e) Mercury (All three extracts) f) Other Toxic Substances )	-	3000.00	-
4.1.2 (Ref. Cl 5.1. of IS 4669)(Composition - Loss on heating )	-	1100.00	-
5(COLOUR)	-	0.00	-
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Wall thickness)	-	0.00	-
7.4 Table 8 & 9 Fig 1(Effective length, l2)	-	0.00	-
7.5 and Table 10 Fig 2A & 2B(Minimum number of slots on the circumference of the cross-section.)	-	0.00	-
4.1.1 (VCM Content as per IS 10151 (Annex A))	-	3000.00	-
9.1(Visual Appearance)	-	0.00	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	0.00	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	0.00	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	0.00	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	0.00	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	0.00	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	0.00	-
8.1 to 8.3 and Table 11 &12 Fig 3A & 4A(THREADING OF SCREEN ANDCASING PIPES. IS 554.)	-	0.00	-
7.5 and Table 10 Fig 2A & 2B(Approximate Free Passage Area, in Percent (Mean Value) for Width of Slot (w))	-	0.00	-
7.4 Table 8 & 9 Fig 1(Segmental length for Spigot (average of 4.0))	-	0.00	-
7.4 Table 8 & 9 Fig 1(Segmental length,mm for socket (average of 4.0))	-	0.00	-
7.4 Table 8 & 9 Fig 1(Segmental length, l3)	-	0.00	-
7.3.2(Rib height)	-	0.00	-
7.3.1(No.of Ribs)	-	0.00	-
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Max)	-	0.00	-
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Min)	-	0.00	-
7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Mean outside dia over connection,mm (Take 4 reading and maximum valu reported))	-	0.00	-
7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point, Max)	-	0.00	-
7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point , Min)	-	0.00	-
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe , Max)	-	0.00	-
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe, Min)	-	0.00	-
7.2 and Table 5, 6 & 7 Fig 1B(Nominal Diameter)	-	0.00	-
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Mean Outer Diameter over Connection)	-	0.00	-
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Outer Diameter at any point )	-	0.00	-
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Mean Outer Diameter of Pipe)	-	0.00	-
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Nominal Diameter)	-	0.00	-
4.1.2 (Ref. Cl 11 of IS 4669)(Composition -Sulphated ash content )	-	0.00	-
4.1.1 (Ref. 3.4.1. of IS 10151)(Composition - The monomer content (VCM content) in the resin - Annex A ofIS 10151)	-	0.00	-
8.4(Sealing elements a. Elastomeric material b. Shore A hardness of sealing Elements )	-	0.00	-
8.4(Width b)	-	0.00	-
8.3.1 & 8.3.2 (Threading of casing pipe (from 100 to 200 DN Table – 11 & Fig. 3A) & (from 250 to 400 DN Table – 12 & Fig. 4A) Outside diameter d1(+0, -0.3) d2 d3 D1 (+0.3, -0) D2 D4 D5 (+0.3, -0) Z h3 (+0, -0.1) H4 (+0, -0.1) )	-	0.00	-
8.2(Threading of casing pipe As per IS 554 (from 40 to 80mm DN) Number of threads in 25.4mm Pitch (P) Height of thread (h) Major (Gauge Diameter) d Pitch(d2) Minor (d1) External Thread gauge length Nominal No. of turns of thread max min )	-	0.00	-
7.5.1 7.5.2 (Slot Dimension (Table 10) Fig 2A & 2B a. Minimum number of slot on the circumference b. Σa±5% c. Mean value of approximate free passage area (%) for width of slot (w) d. Tolerance on width of slot (w) e. Width of material between slot (b))	-	0.00	-
5.0(Colour of Pipes)	-	0.00	-
4.1.2(K-Value as per IS-4669)	-	0.00	-
7.1(Screen Pipes)	-	0.00	-
11(Marking)	-	0.00	-
8(Packing)	-	0.00	-
4.1.3(Cross Chain Length)	-	0.00	-
7.2(Link Twisted (Cross chain))	-	0.00	-
7.3(The Basic chains)	-	0.00	-
7.9(Case Depth)	-	0.00	-
8(Marking)	-	0.00	-
7.5 and Table 10 Fig 2A & 2B(Summation of slot lengths over internal circumference of the cross- section.)	-	0.00	-
5.1(Materials)	-	0.00	-

24 Apr, 2027

-
Exclusion: Cl 4.1.1 (VCM Content as per IS 10151 (Annex A))

12237

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 2508 (2016)

Polyethylene films and sheets - Specification (Third Revision)

TYPE I, TYPE II, TYPE III, TYPE IV

20575.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(Appearance)	-	500.00	-
5.1.2(Film Form)	-	0.00	APPEARNCE , FILM FORM & ODOUR HAVE SINGLE CHARGE.
5.1.3(Odour)	-	0.00	APPEARNCE , FILM FORM & ODOUR HAVE SINGLE CHARGE.
5.1.4(Density, Cl.5 of IS 13360(Part-3/Section-1))	-	700.00	-
5.1.5(Melt Flow Index. Cl 6, 7 of IS 13360(Part-4/Section-1))	-	1100.00	-
5.1.6a(Carbon Black Content, Annex-A)	-	925.00	-
5.1.6b(Ash Content, Annex-A)	-	1200.00	-
5.1.6c(Carbon Black Dispersion, Cl.16 of IS 2530)	-	700.00	-
5.2.2(Tolerance on Thickness, Annex-A)	-	500.00	-
6.1, Table 1(Tensile strength at break. A) Machine Direction. IS 13360 (Part 5/Sec 1))	-	1800.00	Test Charge- 1300.00 SPECIMEN CHARGE- 500.00
6.1, Table 1(Tensile strength at break. B) Transverse Direction. IS 13360 (Part 5/Sec 3))	-	1300.00	-
6.1, Table 1(Ageing test at (70-1)c for 7 days , cl 4 IS 7016 )	-	0.00	CONDITIONING XCHARGE- - 4200.00
7.1. Table 2(Tensile strength at break A) Machine direction IS 13360 (Part-5/sec-1) )	-	1300.00	Test Charge- 1300.00
7.1. Table 2(Tensile strength at break,B) Crosse machine direction IS 13360 (Part-5/sec-3) )	-	1300.00	-
7.1. Table 2(Dart impact strenght , Method A of IS 3360 (Part-5/sec-6) )	-	850.00	-
6.1, Table 1(Tear resistence. A) Machine direction Annex B)	-	1100.00	Test Charge- 1100.00 SPECIMEN CHARGE- 500.00
6.1, Table 1(Tear resistence. B) Transverse direction )	-	1100.00	-
8.1, Table 3(Puncture resistance , Annex C)	-	1100.00	Applicable on Type 3 & Type 4
6.1, Table 1(Elongation at break ,A) Machine direction .IS 13360(Part-5/sec-1) )	-	0.00	-
6.1, Table 1(Elongation at break ,B) Cross-machine direction..IS 13360(Part-5/sec-3) )	-	0.00	-
6.1, Table 1(Dartimpact strength Method B of IS 13360 (Part-5/sec-6) )	-	0.00	-
7.1. Table 2(Ageing test at (70-1)c for 7 days , cl 4 IS 7016 )	-	0.00	-
7.1. Table 2(Elongation at break , A) Machine direction IS 13360 (Part-5/sec-3) IS 13360 (Part-5/sec-1) )	-	0.00	-
7.1. Table 2(Elongation at break , A) Transverse direction IS 13360 (Part-5/sec-3) )	-	0.00	-
8.1, Table 3(Tensile properties ,A) Yield strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0.00	-
8.1, Table 3(Tensile properties , B) Break strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0.00	-
8.1, Table 3(Tensile properties ,C) Yield elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0.00	-
8.1, Table 3(Tensile properties ,D) Break elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0.00	-
8.1, Table 3(Tear resistance , Annex B)	-	0.00	-
9.1, Table 4(Tensile properties ,A) Yield strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0.00	-
9.1, Table 4(Tensile properties , B) Break strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0.00	-
9.1, Table 4(Tensile properties ,C) Yield elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0.00	-
9.1, Table 4(Tensile properties ,D) Break elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0.00	-
9.1, Table 4(Tear resistance , Annex B)	-	0.00	-
9.1, Table 4(Puncture resistance , Annex C)	-	0.00	-
Clause 9.1 (Table 4)(Break Elongation)	-	0.00	-
Clause 9.1 (Table 4)(Yield Elonation)	-	0.00	-
Clause 9.1 (Table 4)(Break strength)	-	0.00	-
Clause 9.1 (Table 4)(Yield strength)	-	0.00	-
Clause 8.1(Table 3)(Break Elongation)	-	0.00	-
Clause 8.1(Table 3)(Break strength)	-	0.00	-
Clause 7.1(Table 2)(Dart Impact Strength)	-	0.00	-
Clause 7.1(Table 2)(Decrease in Tensile Strength after Ageing(Transverse Direction))	-	0.00	-
Clause 7.1(Table 2)(Decrease in Tensile Strength after Ageing(Machine Direction))	-	0.00	-
Clause 6.1(Table 1)(Decrease in Tensile Strength after Ageing(Transverse Direction))	-	0.00	-
Clause 6.1(Table 1)(Decrease in Tensile Strength after Ageing(Machine Direction))	-	0.00	-
Clause 5.2.3(Tolerance on Width)	-	0.00	-
Cl.5.1.6(a)(Carbon Black Content)	-	0.00	-
Cl.5.1.6(b)(Ash content)	-	0.00	-
Cl.5.1.6(c)(Dispersion of Carbon Black)	-	0.00	-
5.2.1.1(Nominal Thickness)	-	0.00	-
5.2.1.2(Nominal width)	-	0.00	-

24 Apr, 2027

-
-

12238

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 12786 (1989)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification

12 MM TO 32 MM

10825.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2a(Carbon Black Content)	-	925.00	-
4.2.b (The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	700.00	-
5 and Table 1(DIMENSIONS OF PIPES - outside diameters)	-	500.00	-
6.1(Visual Appearance)	-	500.00	-
7.1 Table-2 (b)Acceptance Test for 01 hour at 20°C & 6.9MPa induced stress)	-	1000.00	-
7.1 Table-2 (Hydraulic Characteristics a)Quality Test for 100 hours at 70°C & 2.5.MPa induced stress. )	-	3000.00	-
7.2(Reversion Test)	-	1200.00	Test Charge- 700.00 SPECIMEN CHARGE- 500.00
7.3(Tensile Test)	-	1800.00	Test Charge- 1300.00 SPECIMEN CHARGE-500.00
7.4(SusceptibiIity to Environmental Stress Cracking)	-	1200.00	-
4.1.a (Potyethylene - higher olefins constituent )	-	1050.00	ON RAW MATERIAL (OPTIONAL)
4.1.c.i (Density)	-	1125.00	Test Charge-500.00 SPECIMEN CHARGE- 625.00 ON RAW MATERIAL (OPTIONAL)
4.1.c & 4.2.a (Carbon Black content - IS 2530 : 1963)	-	925.00	ON RAW MATERIAL (OPTIONAL)
4.1.c(iv)(MATERIAL)	-	1100.00	ON RAW MATERIAL (OPTIONAL)
4.1.b(Potyethylene - anti-oxidant)	-	0.00	-
4.1.c.ii (Toluene extract - Annex A)	-	0.00	-
4.1.c.iii (Volatile matter - Annex B )	-	0.00	-
4.3(Addition of not more than 10 percent of the manufactures own rework material produced during the manufacture and works testing of pipe complying with this standard is permitted. No other rework material shall be used)	-	0.00	-
7.3(Elongation at Break)	-	0.00	-
5 and Table 1(DIMENSIONS OF PIPES - wall thickness shall)	-	0.00	-
5 and Table 1(DIMENSIONS OF PIPES - outside diameters)	-	0.00	-
5 and Table 1(DIMENSIONS OF PIPES - wall thickness shall)	-	0.00	-
7.2(Reversion Test)	-	0.00	-
5 and Table 1(DIMENSIONS OF PIPES - outside diameters)	-	0.00	-
5 and Table 1(DIMENSIONS OF PIPES - wall thickness shall)	-	0.00	-
7.2(Reversion Test)	-	0.00	-
7.1(Hydraulic Characteristics)	-	0.00	-
7.1(Hydraulic Characteristics)	-	0.00	-
3.1(Class of Pipe)	-	0.00	-
9.0 (9.1)(Minimum Internal Diameter of Coil)	-	0.00	-
9.0 (9.1)(Coiling )	-	0.00	-
8.0 (8.1) (Supply of pipes )	-	0.00	-
6.0 (6.1) (Visual appearance)	-	0.00	-
5.0 5.1 (Table1) (c)Wall thickness of pipe Maximum)	-	0.00	-
5.0 5.1 (Table1) (c)Wall thickness of pipe Minimum)	-	0.00	-
5.0 5.1 (Table1) (b)Tolerance on OD)	-	0.00	-
5.0 5.1 (Table1) (Dimensions a)Outside diameter of pipe)	-	0.00	-
Cl. 4.2(Carbon Black Content)	-	0.00	-
Cl. 4.2(Carbon Black Dispersion)	-	0.00	-
Cl. 5.0 & 5.1 Table -1(Outside Diameter)	-	0.00	-
Cl. 5.0 & 5.1 Table -1(,Tolerence,)	-	0.00	-
Cl. 5.0 & 5.1 Table -1(Wall Thckness)	-	0.00	-
Cl. 7.1 Table -2(Quality Test for 100 hrs @ 70 c & 2.2 Mpa)	-	0.00	-
Cl. 7.1 Table -2(Acceptance Test for 1 hrs @ 27 c & 6.9 Mpa)	-	0.00	-
Cl. 7.3(Tensile Test)	-	0.00	-
Cl. 7.3(Elongation)	-	0.00	-
Cl. 8.0- 8.1(Supply of pipes)	-	0.00	-
Cl. 9.0 - 9.1(Minimum Internal Diameter of Coil)	-	0.00	-
4.1d(MATERIAL)	-	0.00	-
7.4(SusceptibiIity to Environmental Stress)	-	0.00	-
4(MATERIAL)	-	0.00	-
5.1(Diameters and wall thicknesses)	-	0.00	-
6(VISUAL APPEARANCE)	-	0.00	-
7.1(Hydraolic Characteristics)	-	0.00	-
7.2(Reversion Test)	-	0.00	-
7.3(Tensile Test)	-	0.00	-
7.3.1(Test Piece)	-	0.00	-
7.3.2(Procerdure)	-	0.00	-
7.4(SusceptibiIity to Environmental Stress Cracking)	-	0.00	-
8(SUPPLY OF PIPES)	-	0.00	-
9(COILING)	-	0.00	-
11(Marking)	-	0.00	-

24 Apr, 2027

-
-

12239

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 10124 : Part 13 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 13 Specific Requirements for 11Â¼oBends PART 12 SPECIFIC REQUIREMENTS FOR 22 Â½o BENDS

20- 630 MM

5550.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General)	-	5050.00	1. OPACITY- 700.00 2. SHORT TERM HYDROSTATIC - 850.00, 500.00 3. EFFECT ON WATER - 3000.00
3.2.2, Table 2(Dimension of 11 1/4° bends for Elastomeric sealing ring joint)	-	500.00	-
3.2.2, Table 1(Dimension of 11 1/4° bends)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
3.2.3(Socket, Measurement)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.

24 Apr, 2027

-
VCM Content

12240

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 10124 : Part 12 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 12 specific requirements for 22½ degree bends (Second Revision)

20 TO 630 MM

5550.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General)	-	5050.00	1. OPACITY - 700.00 2. SHORT TERM HYDROSTATIC - 850.00, 500.00 3. EFFECT ON WATER - 3000.00
3.2.2, Table 1(Dimensions of 22 ½ deg Bends)	-	500.00	-
3.2.2, Table 2(Dimensions of 22 ½ deg Bend for Elastomeric Sealing Ring Joint)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
3.2.3(Socket, measurements)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.

24 Apr, 2027

-
VCM Content

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number