BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15361 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

12181

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 15351 (2015)

Agro textiles – Laminated high density polyethylene (HDPE) woven geomembrane for water proof lining – Specification (second revision)

TYPE I, II, III & IV

199950.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(HDPE Tapes)	-	2750.00	1. IDENTIFICATION OF TAPE- 1050.00 2. WIDTH OF TAPE - 500.00 3. LINEAR DENSITY OF TAPE - 700.00 4.TAPES PER DM WARP & WEFT DIRECTION - 500.00
3.2(HDPE Fabric)	-	3175.00	1. LAMINATION MATERIAL IDENTIFICATION - 1050.00 2. CARBON BLACK CONTENT - 925.00 3.CBD- 700.00 4. COATING THICKNESS OF LAMINATION/ COATING THICKNESS OF SANDWITCH LAMINATION- 500.00
5(MANUFACTURE)	-	500.00	-
5.1.1 and 6.2(Thickness, mm- IS 7016: Part 1)	-	500.00	-
5.1.1 and 6.2(Mass, g/sq m)	-	500.00	-
5.1.1 and 6.2(Dimensions, mm- Annexure A of IS 11652)	-	500.00	-
5.1.1 and 6.2(Carbon black content, Percent- IS 2530)	-	925.00	-
5.1.1 and 6.2(Breaking Load on 20 cm X 10 cm Strip, Min )	-	1100.00	-
5.1.1 and 6.2(Strain at Maximum load, Percent-IS 13162 (Part 5)	-	1100.00	-
5.1.1 and 6.2( U.V exposure of 1000 h for warp and weft)	-	176500.00	UV EXPOSURE9XENON ARC FOR 1000 HR.) CHARGE - 176500.00
Table-1(Breaking load on 20 × 10 cm strip, N, Min after)	-	1100.00	-
5.1.1 and 6.2(Impact failure load, at 1524 mm drop,)	-	1100.00	-
5.1.1 and 6.2(Tear resistance, N, Min-Method A1 of IS 7016 (Part 3))	-	1100.00	-
5.1.1 and 6.2(Puncture resistance, N, Min-Annex D)	-	1100.00	-
5.1.1 and 6.2(Bursting strength (Ball burst),N/cm², Min-)	-	1000.00	-
5.1.1 and 6.2(Seam strength before UV exposure (N/mm), Min-IS 15060)	-	1100.00	-
Table-1(Seam strength after UV exposure N/mm, Min-Annex B and IS 15060)	-	1100.00	-
5.1.1 and 6.2(Hydrostatic resistance-Annex E)	-	1000.00	-
Table-1(Hydrostatic resistance after UV exposure of 1000 h -Annex B and Annex E)	-	1000.00	-
5.1.1 and 6.2(Ash content, percent, Max-Annex F)	-	1200.00	-
5.1(Lamination)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
5.2(Panel Width)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
5.3(Joints/Seams)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
5.1.1 and 6.2(Length)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
5.1.1 and 6.2(Width)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
5.1.1 and 6.2(Before UV exposure IS 13162 (Part 5)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
5.1.1 and 6.2( Min, gram force at 50 percent failure-Annex C)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
5.1.1 and 6.2(IS 7016 (Part 6))	-	0.00	-

24 Apr, 2027

-
-

12182

CIPET : CSTS - AGARTALA PLASTICS TESTING LABORATORY, (CIPET, AGARTALA)

5173304

IS 13592 (2013)

Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Soil and Waste Discharge System Inside and Outside Buiildings Including Ventilation and Rainwater System

upto DN 315mm

16450 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl6.3(The composition shall be based on PVC resin having a K-value of 64 or greater when tested in accordance with IS 4669)	-	1100	-
Cl.7.1(Mean out side Diameter (For less than or equal to 40 mm- Average of 8 , For higher diameters up to 110 mm average of 6))	-	500	including all dimensional testing charges
Cl.7.1(Outside Diameter at any point (Take 8 reading reported minimum, maximum))	-	500	including all dimensional testing charges
Cl.7.1(Wall thickness "minimum,maximum" (Take 8 reading))	-	500	including all dimensional testing charges
Cl.7.2(Pipes shall be supplied in nominal lengths of 2, 3, 4 or 6 metres either plain or with socket for solvent cementing/grooved socket. Tolerances on specified length shall be + 10 mm and – 0 mm.The nominal length of the pipe with socket for solvent cementing/grooved socket shall be as given in Fig. 1.)	-	500	including all dimensional testing charges
Cl.7.3.1(Minimum wall thickness of socket on pipes shall be as given in Table 2 read with Fig. 2 and Fig. 3.)	-	500	including all dimensional testing charges
Cl.7.3.2(Dimensions of sockets for solvent cementing and grooved sockets of pipes shall be as given in Tables 3 and 4 respectively, read with Fig. 2 and 3.)	-	500	including all dimensional testing charges
Cl.8.2(When tested by the method described in IS 12235 (Part 5), a length of pipe sample of 200 ± 20 mm shall not alter in length by more than 5 percent. In the case of socket ended pipes, this test shall be carried out on the plain portion of pipe taken at least 100 mm away from the root of the socket.)	-	1000	including specimen preparation charges
Cl8.3(This test shall be carried out for socket end pipes only. When tested by the method described in IS 12235 (Part 6), the test specimens shall not show blisters, excessive delamination or cracking or signs of weld line splitting.)	-	700	-
Cl.8.4(When determined in accordance with IS 12235 (Part 2), the vicat softening temperature of the specimen shall not be less than 79°C.)	-	1100	-
Cl.8.5(After the required period of exposure, the tensile strengths of two samples when tested as per IS 12235 (Part 13) shall not show difference of more than 20 percent of their initial tensile strengths)	-	3500	-
Cl. 9, IS 12235 Part 7(Resistance to Sulphuric Acid)	-	2500	including specimen preparation charges
Cl.10.1(When tested by method prescribed in IS 12235 (Part 9),the pipe shall have a true impact rate of not more than 10 percent. Mass of striker and height of fall shall be as per Annex A.)	-	1300	including specimen preparation charges
Cl.10.2(When determined in accordance with the method described in IS 12235 (Part 13), the tensile strength at break shall not be less than 45 MPa.)	-	1400	including specimen preparation charges
Cl.10.3(The axial shrinkage shall not exceed 2 percent when determined in accordance with Annex B.)	-	700	-
Cl.11.(Jointing of solvent cementing joints is to be carried out using solvent conforming to IS 14182. Apply a pressure of 0.05 MPa for a period of 15 min and there should be no leakage at any joint.)	-	1000	-
Cl. 12, IS 12235 Part 11(Resistance to Di-Chloro-Methane)	-	1000	-
8.6(Effect on Water Test)	-	3000	-
Cl.8.1(The internal and external surface of the pipes shall be smooth and clean, and free from grooving and other defects. The end shall be clearly cut and shall be square with the axis of the pipe. The end may be chamfered on the plain side.)	-	250	-

27 Jul, 2026

-
-

12183

BIS, Central Laboratory (CL)

None

IS 4824 (2022)

Bead wires for tyres - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
"Clause 7.2.2 and 7.2.3 - Table 3" (Tensile Strength)	-
"Clause 7.2.2 and 7.2.3 - Table 3" (Minimum Elongation at rupture)	-
"Clause 7.2.2 and 7.2.3 - Table 3" (0.2 percent proof strength)	-
"Clause 7.3 - Table 4" (Torsion Test)	-
Clause 7.4.2 (Surface Quality)	-
Clause 7.5.3 (Wire Straightness)	-
Clause 7.5.4 (Residual Torsions)	-
Clause 7.6.1 (Dimensions)	-
Clause 7.6.3 (Out of Roundness)	-
Clause 7.6.4 (Adhesion Test)	-

-
All element other than C & S can not be tested for dia of sample < 3mm. Excluding test facility not available for diameter < 3 mm for element other than C & S; Adhesion Test (Cl.8.7), 0.2 percent proof strength (7.4.3)

12184

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 13487 (1992)

Irrigation equipment - Emitters - Specification

CATEGORY A 7 CATEGORY B

4700.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Construction and workmanship)	-	300.00	-
7.2(Flow path in emitters)	-	300.00	-
7.3.1(Resistance to Hydrostatic pressure)	-	1000.00	-
7.4.1(Emitter Pull Out In-line emitters)	-	500.00	-
8.1.2(Uniformity of Emission Rate Unregulated emitters)	-	1000.00	-
8.2.3(Emission rate as a function of inlet pressure Regulated emitters)	-	1000.00	-
8.3(Determination of Emitter Exponent)	-	600.00	-

24 Apr, 2027

-
-

12185

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 7903 (2017)

Textiles – Tarpaulins made from high density polyethylene (HDPE) woven fabrics – Specification (fifth revision)

TYPE I, II, III, IV, V, VI, VII

78875.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1()	-	3050.00	Identification of Tape Material(Chemical Analysis)= 1050 UV Stabilizer Identification by FTIR= 2000
3.1(HDPE Tapes (Carbon Black Content))	-	925.00	-
3.1(HDPE Tapes (Presence of UV-stabiliser))	-	2500.00	-
3.2(HDPE Fabric (Material Identification))	-	1050.00	-
3.3(Eyelets)	-	500.00	-
3.4( Line/ Cord beading IS 7903)	-	500.00	-
4.0(Types IS 7903)	-	500.00	-
5.1.1(Lamination IS 7903)	-	1050.00	-
5.1.1(Coating Thickness)	-	500.00	-
5.1.1(Lamination IS 7903)	-	925.00	-
5.1.2(Lamination IS 7903)	-	500.00	-
5.2.1(Construction IS 7903)	-	500.00	-
5.3(Joint/Seam, IS 7903)	-	400.00	-
6.1 Table 1,i)(No of HDPE fabric layers ,IS 7903)	-	500.00	-
6.1 Table 1,iv)(Mass of finished tarpaulin, Annex B ,IS 7903)	-	500.00	-
6.1 Table 1,v)(Mass of laminated fabric, Annex C , IS 7903)	-	500.00	-
6.1 Table 1vi)(Breaking strength before UV exposure,warp ,IS 1969 Part 1)	-	1800.00	Test Charge- 1300.00 SPECIMEN PREPARATION CHARGE- 500.00
6.1 Table 1vi)(Breaking strength before UV exposure,weft, IS 1969 part 1)	-	1800.00	Test Charge- 1300.00 SPECIMEN PREPARATION CHARGE- 500.00
6.1 Table 1 ix)(Welded seam strength before UV exposure (Weft) , IS 1969 Part 1)	-	1100.00	-
6.1 Table 1 x)(Retention of welded seam strength after UV exposure of 144h(Weft) ,IS 13162 part 2& IS 1969 Part1 )	-	1100.00	-
6.1 Table 1 xi)(Trapezoidal tear strength, IS 14293)	-	1100.00	-
6.1 Table 1 xii)(Puncture Resistance, Annex D of IS 7903)	-	1100.00	-
6.1 Table 1 xiii)(Impact Failure load , at 1524 mmdrop, Annex E of IS 7903)	-	1100.00	-
6.1 Table 1 xiv)(Color fastness to light (For color Tarpulines) , IS 2454)	-	19850.00	Test Charges - 850.00 Specimen Preparation Charges - 19000.00
6.1 Table 1 xv)(Ash Content, Annex F of IS 7903)	-	1200.00	-
6.2(Length, IS 7903)	-	500.00	-
6.3(Water Proofness,IS 7941)	-	1000.00	-
6.3(Water Proofness, IS 7940)	-	5200.00	Test Charge- 1000.00 AGEING CHARGE -4200.00
6.1 Table 1 viii)(Retention of breaking strength after UV exposure of 144h Warp, IS 13162 part 2& IS 1969 Part1 )	-	29050.00	Test Charge- 1300.00 Conditioning Charge= 27750.00
6.1 Table 1 viii)(Retention of breaking strength after UV exposure of 144h Weft , IS 13162 part 2& IS 1969 Part1 )	-	1300.00	-
5.4(Fixing of Eyelets, IS 7903)	-	500.00	-
3.1()	-	500.00	-
3.1()	-	700.00	-
3.1()	-	1100.00	-
5.2.1(Construction IS 7903)	-	0.00	-
5.2.1(Construction IS 7903)	-	0.00	-
5.2.1(Construction IS 7903)	-	0.00	-
5.2.1(Construction IS 7903)	-	0.00	-
5.2.1(Construction IS 7903)	-	0.00	-
5.2.1(Construction IS 7903)	-	0.00	-
5.2.1(Construction IS 7903)	-	0.00	-
5.4(Fixing of Eyelets ,IS 7903)	-	0.00	-
6.1 Table 1,ii)(No of lamination layers, IS 7903)	-	0.00	-
6.1 Table 1, iii)(Total no of layers in the finished tarpaulin, IS 7903)	-	0.00	-
6.1 Table 1 vii)(Elongation at break of fabric,warp, IS 1969 Part 1)	-	0.00	-
6.1 Table 1 vii)(Elongation at break of fabric,weft, IS 1969 Part1)	-	0.00	-
6.2(Width, IS 7903)	-	0.00	-
6.2(height, IS 7903)	-	0.00	-
3.4( Line/ Cord beading IS 7903)	-	0.00	-
4.0(Types IS 7903)	-	0.00	-
5.1.2(Lamination IS 7903)	-	0.00	-
5.2.1(Construction IS 7903)	-	0.00	-
5.2.1(Construction IS 7903)	-	0.00	-
5.2.1(Construction IS 7903)	-	0.00	-
5.2.1(Construction IS 7903)	-	0.00	-
5.2.1(Construction IS 7903)	-	0.00	-
5.2.1(Construction IS 7903)	-	0.00	-
5.2.1(Construction IS 7903)	-	0.00	-
5.2.1(Construction IS 7903)	-	0.00	-
5.3(Joint/Seam, IS 7903)	-	0.00	-
5.4(Fixing of Eyelets, IS 7903)	-	0.00	-
5.4(Fixing of Eyelets ,IS 7903)	-	0.00	-
6.1 Table 1,i)(No of HDPE fabric layers ,IS 7903)	-	0.00	-
6.1 Table 1,ii)(No of lamination layers, IS 7903)	-	0.00	-
6.1 Table 1, iii)(Total no of layers in the finished tarpaulin, IS 7903)	-	0.00	-
6.1 Table 1,iv)(Mass of finished tarpaulin, Annex B ,IS 7903)	-	0.00	-
6.1 Table 1,v)(Mass of laminated fabric, Annex C , IS 7903)	-	0.00	-
6.1 Table 1vi)(Breaking strength before UV exposure,warp ,IS 1969 Part 1)	-	0.00	-
6.1 Table 1 vii)(Elongation at break of fabric,weft, IS 1969 Part1)	-	0.00	-
6.1 Table 1 vii)(Elongation at break of fabric,warp, IS 1969 Part 1)	-	0.00	-
6.1 Table 1 viii)(Retention of breaking strength after UV exposure of 144h Warp, IS 13162 part 2& IS 1969 Part1 )	-	0.00	-
6.1 Table 1 viii)(Retention of breaking strength after UV exposure of 144h Weft , IS 13162 part 2& IS 1969 Part1 )	-	0.00	-
6.1 Table 1 ix)(Welded seam strength before UV exposure (Weft) , IS 1969 Part 1)	-	0.00	-
6.1 Table 1 x)(Retention of welded seam strength after UV exposure of 144h(Weft) ,IS 13162 part 2& IS 1969 Part1 )	-	0.00	-
6.1 Table 1 xi)(Trapezoidal tear strength, IS 14293)	-	0.00	-
6.1 Table 1 xii)(Puncture Resistance, Annex D of IS 7903)	-	0.00	-
6.1 Table 1 xiii)(Impact Failure load , at 1524 mmdrop, Annex E of IS 7903)	-	0.00	-
6.1 Table 1 xiv)(Color fastness to light (For color Tarpulines) , IS 2454)	-	0.00	-
6.2(Length, IS 7903)	-	0.00	-
6.2(height, IS 7903)	-	0.00	-
6.3(Water Proofness,IS 7941)	-	0.00	-
6.3(Water Proofness, IS 7940)	-	0.00	-
6.2(dimension(l))	-	0.00	-
6.2(dimension(w))	-	0.00	-
6.2(dimension(h))	-	0.00	-
3.3(Eyelets (Dimesnions) i) Starting thickness of metal Aluminium min ii) Outside dia of flange‘A’ iii) Flange formed height ‘B’ iv) Pierced dia ‘C’ v) Overall length ‘D’ vi) Internal dia of Barrel when closed ‘E’ min vii) Thickness of compressed material between eyelet and washer F’ max viii) Outside diameter of barrel under the flange‘G’ )	-	0.00	-
3.1(HDPE Tapes (Material Identification))	-	0.00	-
3.1()	-	0.00	-
4()	-	0.00	-
5.1.1(Carbon Black Content)	-	0.00	-
5.1.1(Sandwich lamination thickness)	-	0.00	-
5.1.1(Mass of Finished Tarpaulin)	-	0.00	-
5.1.1(UV Exposure (144 hrs))	-	0.00	-
5.1.1(Agening)	-	0.00	-
7(Marking)	-	0.00	-
6.1 Table 1vi)(Breaking strength before UV exposure,weft, IS 1969 part 1)	-	0.00	-
6.1 Table 1 xv)(Ash Content, Annex F of IS 7903)	-	0.00	-
6.2(Width, IS 7903)	-	0.00	-

24 Apr, 2027

-
-

12186

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 14968 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing 50 Kg/25 kg sugar – Specification (first revision)

TYPE I & TYPE II

21930.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Raw Material)	-	1050.00	Optional (Applicable on Raw material)
4.2(Tapes – Width IS 6192 and IS 11197)	-	500.00	Optional (Applicable on Tape)
4.3(Sacks)	-	500.00	-
4.3.1(Bottom Seam)	-	500.00	-
4.5 and Table 1 i(Capacity)	-	500.00	-
5.2 and Table 1 ii a(Dimensions Inside Length)	-	500.00	-
5.2 and Table 1 iii(Ends per dm )	-	500.00	-
5.2 and Table 1 iv(Picks per dm )	-	500.00	-
5.1 and Table 1 v a(Mass of unlaminated sack IS 1964)	-	500.00	-
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise IS 1969 (Part 1))	-	1100.00	-
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise IS 1969 (Part 1))	-	1100.00	-
5.2 and Table 1 vi(Breaking strength of bottom seam IS 9030 )	-	1100.00	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	12380.00	CONDITIOING CHARGE- 10180.00 TESTING CHARGE-2200.00
5.2 and Table 1 x(Ash content )	-	1200.00	-
4.2(Tapes – Linear Density )	-	500.00	Optional (Applicable on Tape)
3(TYPES)	-	0.00	-
4.2(Construction)	-	0.00	-
4.3.1(The two rows of stitches shall be separated from each other)	-	0.00	-
4.3.1( The outer stitch)	-	0.00	-
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	0.00	-
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	0.00	-
4.3.1(stitches/dm)	-	0.00	-
4.3.2(Mouth)	-	0.00	-
4.4(Liner IS 10146 or IS 10910.)	-	0.00	-
4.4(Mass of the loose liner )	-	0.00	-
4.4(Width of the loose liner)	-	0.00	-
4.4(Length of the line)	-	0.00	-
4.4(Bottom seam of the loose liner)	-	0.00	-
4.4.1(Liner)	-	0.00	-
5.2 and Table 1 ii b(Dimensions Inside Width)	-	0.00	-
5.1 and Table 1 v b(Mass of unlaminated sack with liner )	-	0.00	-
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise IS 1969 (Part 1))	-	0.00	-
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise IS 1969 (Part 1))	-	0.00	-
3(TYPES)	-	0.00	-
4.1(Raw Material)	-	0.00	-
4.2(Tapes – Width IS 6192 and IS 11197)	-	0.00	-
4.2(Tapes – Linear Density )	-	0.00	-
4.2(Construction)	-	0.00	-
4.3(Sacks)	-	0.00	-
4.3.1(Bottom Seam)	-	0.00	-
4.3.1(The two rows of stitches shall be separated from each other)	-	0.00	-
4.3.1( The outer stitch)	-	0.00	-
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	0.00	-
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	0.00	-
4.3.1(stitches/dm)	-	0.00	-
4.3.2(Mouth)	-	0.00	-
4.4(Liner IS 10146 or IS 10910.)	-	0.00	-
4.4(Mass of the loose liner )	-	0.00	-
4.4(Width of the loose liner)	-	0.00	-
4.4(Length of the line)	-	0.00	-
4.4(Bottom seam of the loose liner)	-	0.00	-
4.4.1(Liner)	-	0.00	-
4.5 and Table 1 i(Capacity)	-	0.00	-
5.2 and Table 1 ii a(Dimensions Inside Length)	-	0.00	-
5.2 and Table 1 ii b(Dimensions Inside Width)	-	0.00	-
5.2 and Table 1 iii(Ends per dm )	-	0.00	-
5.2 and Table 1 iv(Picks per dm )	-	0.00	-
5.1 and Table 1 v a(Mass of unlaminated sack IS 1964)	-	0.00	-
5.1 and Table 1 v b(Mass of unlaminated sack with liner )	-	0.00	-
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise IS 1969 (Part 1))	-	0.00	-
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise IS 1969 (Part 1))	-	0.00	-
5.2 and Table 1 vi(Breaking strength of bottom seam IS 9030 )	-	0.00	-
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise IS 1969 (Part 1))	-	0.00	-
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise IS 1969 (Part 1))	-	0.00	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	0.00	-
5.2 and Table 1 x(Ash content )	-	0.00	-

24 Apr, 2027

-
-

12187

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 13488 (2008)

Irrigation equipment - Emitting pipe systems - Specification (First Revision)

12 TO 25 MM

12725.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.2 (Ref. Cl 4.1.c & 4.2.a of IS 12786 : 1989)(Carbon Black content - IS 2530 : 1963)	-	925.00	-
5.1.2 (Ref. Cl 4.2.b of IS 12786 : 1989)(The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	700.00	-
6.3(General)	-	500.00	-
8.1.2(Uniformity of Emission Rate for Unregulated Emitting Pipes)	-	1000.00	-
8.2(Emission Rate of Emitting Unit as a Function of Inlet Pressure)	-	1000.00	-
8.3.3(Flow Paths in Emitting Unit)	-	500.00	-
8.3.4(Spacing ofEmitter Units)	-	0.00	SPACING AND FLOW PATH HAVE SINGLE CHARGE
8.4.1(Resistance to Hydrostatic Pressure at Ambient Temperature)	-	1000.00	-
8.4.2(Resistance to Hydrostatic Pressure at Elevated Temperature)	-	1600.00	-
8.5(Resistance to Tension at Elevated Temperature)	-	1100.00	-
8.6(Resistance to Pull Out of Joints Between Fitting and Emitting IS 13479)	-	500.00	-
8.7.1(Resistance of PE Emitting Pipe to Environmental Stress Cracking -Acceptance Test Annex D of IS 12786)	-	2800.00	1. ACCEPATNCE TEST - 1200.00 2. TYPE TEST - 1600.00
8.8(Determination of Emitting Unit Exponent)	-	600.00	-
8.3.2(Inside Diameter ofEmitting Pipe)	-	0.00	All Dimension have single Charge.
6.3(General)	-	0.00	All Dimension have single Charge.
5.1(Materials - shall be resistant to fertilizers and chemicals commonly employed in irrigation, and shall be suitable for use with water at temperatures up to 60°C and at pressures designed for the emitting pipe)	-	0.00	-
5.1.2 (Ref. Cl 4.1.a of IS 12786 : 1989)(Potyethylene - higher olefins constituent )	-	0.00	-
5.1.2 (Ref. Cl 4.1.b of IS 12786 : 1989)(Potyethylene - anti-oxidant)	-	0.00	-
5.1.2 (Ref. Cl 4.1.c.i of IS 12786 : 1989)(Density)	-	0.00	-
5.1.2 (Ref. Cl 4.1.c.ii of IS 12786 : 1989)(Toluene extract - Annex A of IS 12786:1989)	-	0.00	-
5.1.2 (Ref. Cl 4.1.c.iii of IS 12786 : 1989)(Volatile matter - Annex B of IS 12786:1989)	-	0.00	-
5.1.2 (Ref. Cl 4.3 of IS 12786 : 1989)(Addition of not more than 10 percent of the manufactures own rework material produced during the manufacture and works testing of pipe complying with this standard is permitted. No other rework material shall be used)	-	0.00	-
6.2.2(Fittings)	-	0.00	-
8.1.3(Uniformity of Emission Rate for Regulated Emitting Pipes)	-	0.00	-
8.2.1(Unregu/Qt~d Emining Pipe)	-	0.00	-
8.2.2(Regulated Emitting Pipes)	-	0.00	-
8.3.1(Wall Thickness ofEmitting Pipe)	-	0.00	-
8.5(Resistance to Tension at Elevated Temperature)	-	0.00	-
8.5(Resistance to Tension at Elevated Temperature)	-	0.00	-
8.7.2(Resistance of PE Emitting Pipe to Environmental Stress Cracking - Type Test Annex D of IS 12786)	-	0.00	-
9.1(DESIGNATION - Non regulated Emitting Pipe)	-	0.00	-
9.2(DESIGNATION - Regulated Emitting Pipe)	-	0.00	-
4.1 a(Identification)	-	0.00	-
4.1 a(Identification)	-	0.00	-
4.1 c(Volatile matter Extract)	-	0.00	-
4.1 d(Density)	-	0.00	-
4.1 d(MFI @ 1900C/2.16 Kg)	-	0.00	-
4.2(Carbon black content)	-	0.00	-
4.2(Carbon black dispersion)	-	0.00	-
5.1(Materials)	-	0.00	-
6.1.1, Table 1,(i)(Nominal Diameter)	-	0.00	-
6.1.1, Table 1,(ii)(Inside Diameter)	-	0.00	-
6.1.1, Table 1,(iii)(Tolerance on I.D)	-	0.00	-
6.1.1, Table 1,(iv)(Wall Thickness)	-	0.00	-
6.2(Fittings)	-	0.00	-
6.3(General)	-	0.00	-
7.1(Test Specimens)	-	0.00	-
7.2(Order of Tests)	-	0.00	-
7.3(Testing Conditions)	-	0.00	-
7.4(Accuracy of Measuring Devices)	-	0.00	-
8.1(Uniformity of Emission Rate)	-	0.00	-
8.1.2(Unregulated Emitting Pipes)	-	0.00	-
8.1.3(Regulated Emitting Pipes)	-	0.00	-
8.2(Emission Rate of Emitting Unit as a Function of Inlet Pressure)	-	0.00	-
8.2.1(Unregulated Emitting Pipes)	-	0.00	-
8.2.2(Regulated Emitting Pipes)	-	0.00	-
8.3.1(Wall Thickness ofEmitting Pipe)	-	0.00	-
8.3.2(Inside Diameter ofEmitting Pipe)	-	0.00	-
8.3.3(Flow Paths in Emitting Unit)	-	0.00	-
8.3.4(Spacing of Emitter Units)	-	0.00	-
8.4(Resistance of Emitting Pipes to Hydrostatic Pressure)	-	0.00	-
8.5(Resistance to Tension at Elevated Temperature)	-	0.00	-
8.6(Resistance to Pull Out ofJoints Between Fitting and Emitting)	-	0.00	-
8.7.1(Acceptance Test)	-	0.00	-
8.7.2(Type Test)	-	0.00	-
8.8(Determination of Emitting Unit Exponen)	-	0.00	-
9.1(Non-regulated Emitting Pipe)	-	0.00	-
9.2(Regulated Emitting Pipe)	-	0.00	-
10.1(Marking)	-	0.00	-

24 Apr, 2027

-
-

12188

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 15801 (2008)

Polypropylene - Random copolymer pipes for hot and cold water supplies - Specification

16 TO 200 MM

117150.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Colour)	-	500.00	-
Cl 7(Dimensions Of Pipes)	-	500.00	-
Cl 8(Visual Appearance)	-	500.00	-
Cl 9.1(Hydraulic Characteristics)	-	18400.00	1. 1Hr. at 20 deg - 1000.00 2. 22 Hr. at 95 deg. c - 1600.00 3. Type test 165 Hr. at 95 deg. C - 4800.00 4. type test 1000 Hr. at 95 deg. C - 11000.00
Cl 9.2(Fusion Compatibility)	-	4800.00	-
Cl 9.3(Reversion Test )	-	1200.00	Test Charges - 700.00 specimen Preparation Charge - 500.00
Cl 9.4 & Annex B(Impact Strength)	-	1600.00	Test Charges - 1100.00 specimen Preparation Charge - 500.00
Cl 9.5(Density)	-	700.00	-
Cl 9.6(Melt Flow Rate)	-	1100.00	-
Cl 9.7(Carbon Black Content & Dispersion)	-	1625.00	1. CBC - 925.00 2. CBD - 700.00
Cl 9.8(Thermal Stability By Hydrostatic Pressure Testing)	-	83825.00	1. TESTING CHARGE- 1700.00 2. CONDITIONING CHARGE - 82125.00
Cl 9.9(Opacity)	-	700.00	-
Cl 4( Designation)	-	0.00	-

24 Apr, 2027

-
-

12189

INDIAN TESTING LABORATORY PRIVATE LIMITED, GREATER NOIDA

8171306

IS 1110 (1990)

Ferrosilicon - Specification (Fourth Revision)

All grades

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Silicon- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	1000	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Carbon- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	1000	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Sulphur- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	1000	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Phosphorus- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	1000	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Aluminium- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	1000	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Calcium- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	1000	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Manganese-IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	1000	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Silicon- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	0	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Carbon- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	0	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Sulphur- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	0	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Phosphorus- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	0	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Aluminium- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	0	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Calcium- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	0	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Manganese-IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	0	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Titanium- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	1000	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Boron-IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	1000	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Zirconium- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	1000	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Silicon- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	0	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Carbon- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	0	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Sulphur- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	0	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Phosphorus- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	0	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Aluminium- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	0	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Calcium- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	0	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Manganese-IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	0	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Titanium- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	0	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Boron-IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	0	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Zirconium- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	0	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Silicon- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	0	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Carbon- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	0	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Sulphur- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	0	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Phosphorus- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	0	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Aluminium- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	0	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Calcium- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	0	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Manganese-IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	0	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Titanium- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	0	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Boron-IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	0	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Zirconium- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	0	-

15 Aug, 2028

-
Included w.e.f. 09.12.2022.

12190

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 16186 (2014)

Textiles - Light weight jute sacking bags for packing 50 kg foodgrains - Specification

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Manufacture- IS16186)	-	200	Total testing charges- Rs/- 9000 without ECO Mark Total testing charges- Rs/- 30000 with ECO Mark.
4.1(ii) The mass per square meter of sacking used in the fabric of the bag 504 g.)	-	400	-
4.2(Seam-IS 9113 (Cl.5.1.2))	-	200	-
4.3(Union Safety Stitch-IS 9113 (Cl.5.1.2))	-	200	-
4.4(Hemming at the mouth-IS 9113 (Cl.5.1.2))	-	300	-
4.5(Freedom from defects)	-	500	-
4.1 & 5.1, Table 1(Outside Length, cm )	-	400	-
4.1 & 5.1, Table 1(Outside Width, cm )	-	400	-
4.1 & 5.1, Table 1(Ends /dm-IS 9113 (Cl.8.4.2))	-	300	-
4.1 & 5.1, Table 1(Picks/dm-IS 9113 (Cl.8.4.2))	-	300	-
4.1 & 5.1, Table 1(Corrected Mass/Bag,g-IS 9113 (Cl.8.5.2))	-	600	-
4.1 & 5.1, Table 1(Average Breaking Strength in N)	-	1800	-
4.1 & 5.1, Table 1(Average Seam Strength in N-IS 9113 (Cl.8.7))	-	1200	-
4.1 & 5.1, Table 1(Moisture Regain, Percent-IS 9113 (Cl.8.2))	-	1000	-
4.1 & 5.1, Table 1(Oil content, Percent-IS 9113 (Cl.8.5.2))	-	1200	Note: Clause no- 5.4.2.1- Non-Halogenated hydrocarbons Rs/-7000 Clause no- 5.4.2.1- Pesticides (Sum parameters) Rs/-7400 Clause no- 5.4.2.1- pH of aqueous extract Rs/-600 Clause no- 5.4.2.1- Coupled amines from azo-dyes (sum parameters)Rs/-6000
4(Manufacture- IS16186)	-	0	Testing charges already listed above
4.1(ii) The mass per square meter of sacking used in the fabric of the bag 504 g.)	-	0	Testing charges already listed above
4.2(Seam-IS 9113 (Cl.5.1.2))	-	0	Testing charges already listed above
4.3(Union Safety Stitch-IS 9113 (Cl.5.1.2))	-	0	Testing charges already listed above
4.4(Hemming at the mouth-IS 9113 (Cl.5.1.2))	-	0	Testing charges already listed above
4.5(Freedom from defects)	-	0	Testing charges already listed above
4.1 & 5.1, Table 1(Outside Length, cm )	-	0	Testing charges already listed above
4.1 & 5.1, Table 1(Outside Width, cm )	-	0	Testing charges already listed above
4.1 & 5.1, Table 1(Ends /dm-IS 9113 (Cl.8.4.2))	-	0	Testing charges already listed above
4.1 & 5.1, Table 1(Picks/dm-IS 9113 (Cl.8.4.2))	-	0	Testing charges already listed above
4.1 & 5.1, Table 1(Corrected Mass/Bag,g-IS 9113 (Cl.8.5.2))	-	0	Testing charges already listed above
4.1 & 5.1, Table 1(Average Breaking Strength in N)	-	0	Testing charges already listed above
4.1 & 5.1, Table 1(Average Seam Strength in N-IS 9113 (Cl.8.7))	-	0	Testing charges already listed above
4.1 & 5.1, Table 1(Moisture Regain, Percent-IS 9113 (Cl.8.2))	-	0	Testing charges already listed above
4.1 & 5.1, Table 1(Oil content, Percent-IS 9113 (Cl.8.5.2))	-	0	Testing charges already listed above
4.1(i)The bags shall be made from single piece of 2/1 twill weave jute sacking of uniform construction with warp running along the length of the bag. )	-	0	Testing charges already listed above
4.2.i)( Type of stitches Herakle )	-	0	Testing charges already listed above
4.2.ii)( Jute twine for stitches Two strands of 3-ply )	-	0	Testing charges already listed above
4.2.iii)( Stitches/dm 10 ± 1 )	-	0	Testing charges already listed above
4.3.i)( Stitches/dm 10 ± 1 )	-	0	Testing charges already listed above
4.3.ii)(Tex of jute twine )	-	0	Testing charges already listed above
4.1(Fabric)	-	0	Testing charges already listed above
4.2.iv)(Tex of jute twine [ IS 9113 (Cl.5.1.2) ] 310 tex.X 3-ply )	-	0	Testing charges already listed above
4.3( 310 tex.X 2-ply )	-	0	Testing charges already listed above
4.4(Fabric shall be hemmed with jute yarn of 310 tex )	-	0	Testing charges already listed above
4.5, Annex A(GAW)	-	0	Testing charges already listed above
4.5, Annex A(Multiple broken/missing warp(end)-Two or more contiguous, regardless of length )	-	0	Testing charges already listed above
4.5, Annex A(Multiple broken weft(pick))	-	0	Testing charges already listed above
4.5, Annex A(Cut, hole, tear or patch-Two or more warp thread ruptured at adjoining points )	-	0	Testing charges already listed above
4.5, Annex A(Float-Fabric where warp and weft yarns escape)	-	0	Testing charges already listed above
4.5, Annex A(Gap stitching-Stitching missing)	-	0	Testing charges already listed above
4.5, Annex A(Corner gap-Hole formation due to improper stitching at the corner of the bag )	-	0	Testing charges already listed above
4.5, Annex A(Mildew-Staining of fabric due to fungal or bacterial growth visible to naked eye)	-	0	Testing charges already listed above
4.1 & 5.1, Table 1(Dimension-IS 9113 (Cl.8.3.2))	-	0	Testing charges already listed above
4.1 & 5.1, Table 1(Warpway -IS 9113 (Cl.8.6.2))	-	0	Testing charges already listed above
4.1 & 5.1, Table 1(Weftway-IS 9113 (Cl.8.6.2))	-	0	Testing charges already listed above
4(Manufacture- IS16186)	-	0	Testing charges already listed above
4.1(ii) The mass per square meter of sacking used in the fabric of the bag 504 g.)	-	0	Testing charges already listed above
4.2(Seam-IS 9113 (Cl.5.1.2))	-	0	Testing charges already listed above
4.3(Union Safety Stitch-IS 9113 (Cl.5.1.2))	-	0	Testing charges already listed above
4.4(Hemming at the mouth-IS 9113 (Cl.5.1.2))	-	0	Testing charges already listed above
4.5(Freedom from defects)	-	0	Testing charges already listed above
4.1 & 5.1, Table 1(Outside Length, cm )	-	0	Testing charges already listed above
4.1 & 5.1, Table 1(Outside Width, cm )	-	0	Testing charges already listed above
4.1 & 5.1, Table 1(Ends /dm-IS 9113 (Cl.8.4.2))	-	0	Testing charges already listed above
4.1 & 5.1, Table 1(Picks/dm-IS 9113 (Cl.8.4.2))	-	0	Testing charges already listed above
4.1 & 5.1, Table 1(Corrected Mass/Bag,g-IS 9113 (Cl.8.5.2))	-	0	Testing charges already listed above
4.1 & 5.1, Table 1(Average Breaking Strength in N)	-	0	Testing charges already listed above
4.1 & 5.1, Table 1(Average Seam Strength in N-IS 9113 (Cl.8.7))	-	0	Testing charges already listed above
4.1 & 5.1, Table 1(Moisture Regain, Percent-IS 9113 (Cl.8.2))	-	0	Testing charges already listed above
4.1 & 5.1, Table 1(Oil content, Percent-IS 9113 (Cl.8.5.2))	-	0	Testing charges already listed above
4.1(i)The bags shall be made from single piece of 2/1 twill weave jute sacking of uniform construction with warp running along the length of the bag. )	-	0	Testing charges already listed above
4.2.i)( Type of stitches Herakle )	-	0	Testing charges already listed above
4.2.ii)( Jute twine for stitches Two strands of 3-ply )	-	0	Testing charges already listed above
4.2.iii)( Stitches/dm 10 ± 1 )	-	0	Testing charges already listed above
4.3.i)( Stitches/dm 10 ± 1 )	-	0	Testing charges already listed above
4.3.ii)(Tex of jute twine )	-	0	Testing charges already listed above
4.1(Fabric)	-	0	Testing charges already listed above
4.2.iv)(Tex of jute twine [ IS 9113 (Cl.5.1.2) ] 310 tex.X 3-ply )	-	0	Testing charges already listed above
4.3( 310 tex.X 2-ply )	-	0	Testing charges already listed above
4.4(Fabric shall be hemmed with jute yarn of 310 tex )	-	0	Testing charges already listed above
4.5, Annex A(GAW)	-	0	Testing charges already listed above
4.5, Annex A(Multiple broken/missing warp(end)-Two or more contiguous, regardless of length )	-	0	Testing charges already listed above
4.5, Annex A(Multiple broken weft(pick))	-	0	Testing charges already listed above
4.5, Annex A(Cut, hole, tear or patch-Two or more warp thread ruptured at adjoining points )	-	0	Testing charges already listed above
4.5, Annex A(Float-Fabric where warp and weft yarns escape)	-	0	Testing charges already listed above
4.5, Annex A(Gap stitching-Stitching missing)	-	0	Testing charges already listed above
4.5, Annex A(Corner gap-Hole formation due to improper stitching at the corner of the bag )	-	0	Testing charges already listed above
4.5, Annex A(Mildew-Staining of fabric due to fungal or bacterial growth visible to naked eye)	-	0	Testing charges already listed above
4.1 & 5.1, Table 1(Dimension-IS 9113 (Cl.8.3.2))	-	0	Testing charges already listed above
4.1 & 5.1, Table 1(Warpway -IS 9113 (Cl.8.6.2))	-	0	Testing charges already listed above
4.1 & 5.1, Table 1(Weftway-IS 9113 (Cl.8.6.2))	-	0	Testing charges already listed above

31 Dec, 2026

-
-

12191

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 14252 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sack for filling sand – Specification (second revision)

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Tapes – Width )	-	200	-
3.2(Tapes – Linear Density )	-	800	-
3.3(Tying Cord)	-	400	-
3.4(Sack)	-	200	-
3.4.1(Seam)	-	2900	-
4.1 and Table 1 i a(Dimensions Outside Length)	-	500	-
4.1 and Table 1 i b(Dimensions Outside Width)	-	500	-
4.1 and Table 1 ii(Ends per dm )	-	300	-
4.1 and Table 1 iii(Picks per dm )	-	300	-
4.2 and Table 1 iv(Mass of sack )	-	400	-
4.1 and Table 1 v a(Average breaking strength of fabric Warpway )	-	1200	-
4.1 and Table 1 v b(Average breaking strength of fabric Weftway )	-	1200	-
4.1 and Table 1 vi(Average Breaking strength of bottom seam )	-	1000	-
4.1 and Table 1 vii a(Elongation at break of fabric Lengthwise)	-	1000	-
4.1 and Table 1 vii b(Elongation at break of fabric Widthwise )	-	1000	-
4.1 and Table 1 viii(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	3000	-
4.1 and Table 1 ix(Ash content )	-	1000	-
3.2(Tapes – Width )	-	0	All ready listed above
3.2(Tapes – Linear Density )	-	0	All ready listed above
3.3(Tying Cord)	-	0	All ready listed above
3.4(Sack)	-	0	All ready listed above
3.4.1(Seam)	-	0	All ready listed above
4.1 and Table 1 i a(Dimensions Outside Length)	-	0	All ready listed above
4.1 and Table 1 i b(Dimensions Outside Width)	-	0	All ready listed above
4.1 and Table 1 ii(Ends per dm )	-	0	All ready listed above
4.1 and Table 1 iii(Picks per dm )	-	0	All ready listed above
4.2 and Table 1 iv(Mass of sack )	-	0	All ready listed above
4.1 and Table 1 v a(Average breaking strength of fabric Warpway )	-	0	All ready listed above
4.1 and Table 1 v b(Average breaking strength of fabric Weftway )	-	0	All ready listed above
4.1 and Table 1 vi(Average Breaking strength of bottom seam )	-	0	All ready listed above
4.1 and Table 1 vii a(Elongation at break of fabric Lengthwise)	-	0	All ready listed above
4.1 and Table 1 vii b(Elongation at break of fabric Widthwise )	-	0	All ready listed above
4.1 and Table 1 viii(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	0	All ready listed above
4.1 and Table 1 ix(Ash content )	-	0	All ready listed above
3.1(Raw Material)	-	0	All ready listed above
3.3(Tying Cord)	-	0	All ready listed above
3.3(Tying Cord)	-	0	All ready listed above
3.4.1(Seam)	-	0	All ready listed above
3.4.1(Seam)	-	0	All ready listed above
3.4.1(Seam)	-	0	All ready listed above
3.1(Raw Material)	-	0	All ready listed above
3.2(Tapes – Width )	-	0	All ready listed above
3.2(Tapes – Linear Density )	-	0	All ready listed above
3.3(Tying Cord)	-	0	All ready listed above
3.3(Tying Cord)	-	0	All ready listed above
3.3(Tying Cord)	-	0	All ready listed above
3.4(Sack)	-	0	All ready listed above
3.4.1(Seam)	-	0	All ready listed above
3.4.1(Seam)	-	0	All ready listed above
3.4.1(Seam)	-	0	All ready listed above
3.4.1(Seam)	-	0	All ready listed above
4.1 and Table 1 i a(Dimensions Outside Length)	-	0	All ready listed above
4.1 and Table 1 i b(Dimensions Outside Width)	-	0	All ready listed above
4.1 and Table 1 ii(Ends per dm )	-	0	All ready listed above
4.1 and Table 1 iii(Picks per dm )	-	0	All ready listed above
4.2 and Table 1 iv(Mass of sack )	-	0	All ready listed above
4.1 and Table 1 v a(Average breaking strength of fabric Warpway )	-	0	All ready listed above
4.1 and Table 1 v b(Average breaking strength of fabric Weftway )	-	0	All ready listed above
4.1 and Table 1 vi(Average Breaking strength of bottom seam )	-	0	All ready listed above
4.1 and Table 1 vii a(Elongation at break of fabric Lengthwise)	-	0	All ready listed above
4.1 and Table 1 vii b(Elongation at break of fabric Widthwise )	-	0	All ready listed above
4.1 and Table 1 viii(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	0	All ready listed above
4.1 and Table 1 ix(Ash content )	-	0	All ready listed above

31 Dec, 2026

-
Included w.e.f. 24.05.2024

12192

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 11544 (1986)

Specification for slipper, rubber

6700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Shape & Design)	-	400	Clause no-3.2-Dimensions 600/-
3.2(Relative density )	-	800	-
3.2(Hardness (IRHD))	-	500	-
3.2(Hardness after ageing)	-	800	-
3.2.4(Mass per unit area)	-	400	-
3.2.4(End per cm)	-	200	-
3.2.4(Picks per cm)	-	200	-
3.2.4(Colour fasntess to washing)	-	400	-
3.2(Flexural endurance)	-	800	-
3.2.4.1(Weave of fabrics)	-	200	-
3.2.8(Workmanship and Finish -)	-	200	-
3.2.5(Type of Thread)	-	400	-
3.2.6(Thickness of components)	-	800	-
3.1(Shape & Design)	-	0	All ready listed above
3.2(Relative density )	-	0	All ready listed above
3.2(Hardness (IRHD))	-	0	All ready listed above
3.2(Hardness after ageing)	-	0	All ready listed above
3.2.4(Mass per unit area)	-	0	All ready listed above
3.2.4(End per cm)	-	0	All ready listed above
3.2.4(Picks per cm)	-	0	All ready listed above
3.2.4(Colour fasntess to washing)	-	0	All ready listed above
3.2(Flexural endurance)	-	0	All ready listed above
3.2.4.1(Weave of fabrics)	-	0	All ready listed above
3.2.8(Workmanship and Finish -)	-	0	All ready listed above
3.2.5(Type of Thread)	-	0	All ready listed above
3.2.6(Thickness of components)	-	0	All ready listed above
3.1(Shape & Design)	-	0	All ready listed above
3.2(Relative density )	-	0	All ready listed above
3.2(Hardness (IRHD))	-	0	All ready listed above
3.2(Hardness after ageing)	-	0	All ready listed above
3.2.4(Mass per unit area)	-	0	All ready listed above
3.2.4(End per cm)	-	0	All ready listed above
3.2.4(Picks per cm)	-	0	All ready listed above
3.2.4(Colour fasntess to washing)	-	0	All ready listed above
3.2(Flexural endurance)	-	0	All ready listed above
3.2.4.1(Weave of fabrics)	-	0	All ready listed above
3.2.8(Workmanship and Finish -)	-	0	All ready listed above
3.2.5(Type of Thread)	-	0	All ready listed above
3.2.6(Thickness of components)	-	0	All ready listed above
3.2.2(Bottom Filling Material)	-	0	All ready listed above
3.2.7(vulcanized process)	-	0	All ready listed above
3.2.9(Preservation -)	-	0	All ready listed above
Cl. 4, Cl. 4.1, Cl 4.2, Cl. 4.3(Marking and packing)	-	0	All ready listed above
Cl. 4, Cl. 4.1,Cl 4.2(Marking and packing)	-	0	All ready listed above
3.1(Shape & Design)	-	0	All ready listed above
3.2(Relative density )	-	0	All ready listed above
3.2(Hardness (IRHD))	-	0	All ready listed above
3.2(Hardness after ageing)	-	0	All ready listed above
3.2.4(Mass per unit area)	-	0	All ready listed above
3.2.4(End per cm)	-	0	All ready listed above
3.2.4(Picks per cm)	-	0	All ready listed above
3.2.4(Colour fasntess to washing)	-	0	All ready listed above
3.2(Flexural endurance)	-	0	All ready listed above
3.2.4.1(Weave of fabrics)	-	0	All ready listed above
3.2.8(Workmanship and Finish -)	-	0	All ready listed above
3.2.5(Type of Thread)	-	0	All ready listed above
3.2.6(Thickness of components)	-	0	All ready listed above
3.2.2(Bottom Filling Material)	-	0	All ready listed above
3.2.7(vulcanized process)	-	0	All ready listed above
3.2.9(Preservation -)	-	0	All ready listed above
Cl. 4, Cl. 4.1, Cl 4.2, Cl. 4.3(Marking and packing)	-	0	All ready listed above
Cl. 4, Cl. 4.1,Cl 4.2(Marking and packing)	-	0	All ready listed above
3.1(Shape & Design)	-	0	All ready listed above
3.2(Relative density )	-	0	All ready listed above
3.2(Hardness (IRHD))	-	0	All ready listed above
3.2(Hardness after ageing)	-	0	All ready listed above
3.2.4(Mass per unit area)	-	0	All ready listed above
3.2.4(End per cm)	-	0	All ready listed above
3.2.4(Picks per cm)	-	0	All ready listed above
3.2.4(Colour fasntess to washing)	-	0	All ready listed above
3.2(Flexural endurance)	-	0	All ready listed above
3.2.4.1(Weave of fabrics)	-	0	All ready listed above
3.2.8(Workmanship and Finish -)	-	0	All ready listed above
3.2.5(Type of Thread)	-	0	All ready listed above
3.2.6(Thickness of components)	-	0	All ready listed above
3.2.2(Bottom Filling Material)	-	0	All ready listed above
3.2.7(vulcanized process)	-	0	All ready listed above
3.2.9(Preservation -)	-	0	All ready listed above
Cl. 4, Cl. 4.1, Cl 4.2, Cl. 4.3(Marking and packing)	-	0	All ready listed above
Cl. 4, Cl. 4.1,Cl 4.2(Marking and packing)	-	0	All ready listed above
3.1(Shape & Design)	-	0	All ready listed above
3.2(Relative density )	-	0	All ready listed above
3.2(Hardness (IRHD))	-	0	All ready listed above
3.2(Hardness after ageing)	-	0	All ready listed above
3.2.4(Mass per unit area)	-	0	All ready listed above
3.2.4(End per cm)	-	0	All ready listed above
3.2.4(Picks per cm)	-	0	All ready listed above
3.2.4(Colour fasntess to washing)	-	0	All ready listed above
3.2(Flexural endurance)	-	0	All ready listed above
3.2.4.1(Weave of fabrics)	-	0	All ready listed above
3.2.8(Workmanship and Finish -)	-	0	All ready listed above
3.2.5(Type of Thread)	-	0	All ready listed above
3.2.6(Thickness of components)	-	0	All ready listed above
3.2.2(Bottom Filling Material)	-	0	All ready listed above
3.2.7(vulcanized process)	-	0	All ready listed above
3.2.9(Preservation -)	-	0	All ready listed above
Cl. 4, Cl. 4.1, Cl 4.2, Cl. 4.3(Marking and packing)	-	0	All ready listed above
Cl. 4, Cl. 4.1,Cl 4.2(Marking and packing)	-	0	All ready listed above

31 Dec, 2026

-
Included w.e.f 22.01.2025

12193

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 3735 (1996)

Canvas Shoes, Rubber Sole

20500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1 Upper, Sl No. (i) of Table 1(The upper shall consist of over layer of cotton, manmade or blended conforming' to the requirements given in Sl No. (i) of Table 1 as an overlayer and cotton drill conforming to the requirements given in Sl No. (ii) of Table 1, as an inner layer or lining. The two fabrics shall be firmly adhered together with rubber compound. )	-	1000	Charges for Clause no-4.1.1.1 Drill-2600 Rs/-
Cl.4.1.1.1 Colour fastness(The dyed fabrics prescribed in 4.1.1 shall be fast todaylight and mechanical washing. Fastness to daylight shall be of rating 4 or better, when tested in accordance with IS 686 : 1985 or IS 2454: 1985. However in case of dispute the method prescribed in IS 686 : 1985 shall be considered as referee method.)	-	800	Clause no- 4.1.1.1 Color fastness to washing-800 Rs/-
Cl.4.1.2 Binding Material(IS 1954 : 1990) (IS1969 : 1985)(Cotton tape NEWAR used as binding material shall conform to the requirements prescribed in col 3 of Table 2, when tested in accordance with the methods referred to in col 4 of the table.)	-	1250	-
Cl.4.1.3.1( Sewing thread cotton, manmade or blended shall be used for stitching of upper. For cotton variety thread shall conform to variety No. 28 of IS 1720. Polyester variety thread shall conform to variety No. 9 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification. Sewing thread cotton, manmade or blended shall be used for binding of upper. For cotton variety thread shall conform to variety No. 32 of IS 1720. Polyester variety thread shall conform to variety No. 5 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification.')	-	2650	-
Cl.4.1.4(.Brass, steel or aluminium eyelets of 7.5 mm diameter and wall thickness 0.30 to 0.35 mm shall be used.')	-	500	-
Cl.4.1.5 Laces( The shoes shall be provided with fabric braided laces either matching the shade of the upper or black or The length of the lace shall be 60 ± 3 cm )	-	250	-
Cl.4.1.5 Laces(and shallhave the breaking strength of not less than 250 N when tested between 18 cm grips in accordance with IS 1969 : 1985, the rate of traverse of power actuated grip being 300 mm/min.)	-	800	-
Cl.4.1.5 Laces Annex B(In case the laces are black, the same shall pass the test for freedom from sulpher dyes when tested in accordance with Annex B. The two ends of the lace shall be provided with suitable metal or plastic tips.)	-	500	Including Clause no-4.1.5-Colour
Cl.4.1.6 Rubber Components(The rubber components shall conform to the requirements given in Table 4, when tested from finished boots.However in case it is not possible to cut the test pieces from the made up boots then 4.1.5.3 of IS 13695 : 1993 shall be followed.')	-	4200	-
Cl.4.1.6.2 Ageing col 4 of Table 5.(The shoes shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the shoes shall conform to the physical requirements prescribed in col 4 of Table 5. )	-	800	-
Cl.4.1.6.2 Ageing (None of the rubber components of the shoes shall show any sign of tackiness or crack developed after ageing, when examined visually)	-	0	Charges already listed above
Cl.'4.3.2( Back of the upper shall be reinforced with a strip of upper material when there is a seam.')	-	500	-
Cl.4.3.3(he number of stitches shall be 30 to 40 per decimetre. The counter binding shall meet the binding of the upper at the centre top edge of the heel.)	-	250	-
Cl.4.3.4 (The vantp shall be strengthened with a rubber toe-cap (see Fig. 1).)	-	250	-
Cl.4.3.5( Five pairs of eyelets shall be fitted in each shoe. The eyelets shall be properly clenched without any distortion. It shall properly match the colour of the upper canvas, or as agreed to between the purchaser and the supplier.)	-	250	-
Cl.4.3.6( The shoes shall be free from folds, wrinkles in the upper, blisters, embedded foreign matters and excessive surface markings. In appearance, general workmanship, finish and all other respects, not defined in the standard, the shoes shall be similar to the sample approved by the purchaser, if any)	-	250	-
CL.4.3.7( The soles shall be of even substance and ofone layer only.)	-	250	-
Cl.4.3.8( A rubber foxing shall be fixed all round the sole and heel. The colour shall be as agreed to between the purchaser and the supplier. )	-	250	-
Cl.4.4 Adhesion Test(From the upper-foxing portion where it is adhered to the canvas, parallel to the waist of sole, cut a strip of length 100 mm and width 8 mm. Separate out the plies initially by breaking the bond to a length of about 75 mm. Carry out the test on two specimens in accordance with IS 3400 (Part 5) : 1986. There shall be no further separation within 1 minute at a load of 1 kg for each of the two specimens.)	-	800	-
Cl.4.5 Consolidation Test IS 3400 (Part 5) : 1986 (From the quarter, cut a strip of 25.0 ± 0.5 mm width along the leagth of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30N (3.0 kgf) for each of the teat piecea (see Note under 4.4).')	-	800	-
CL.4.6 Mass(The mass of one pair of finished shoes of size 8 shall not exceed 750 g with an increase or decrease of 25 g for each bigger or smaller size respectively)	-	250	-
4.1.1 Upper, Sl No. (i) of Table 1(The upper shall consist of over layer of cotton, manmade or blended conforming' to the requirements given in Sl No. (i) of Table 1 as an overlayer and cotton drill conforming to the requirements given in Sl No. (ii) of Table 1, as an inner layer or lining. The two fabrics shall be firmly adhered together with rubber compound. )	-	0	Charges already listed above
Cl.4.1.1.1 Colour fastness(The dyed fabrics prescribed in 4.1.1 shall be fast todaylight and mechanical washing. Fastness to daylight shall be of rating 4 or better, when tested in accordance with IS 686 : 1985 or IS 2454: 1985. However in case of dispute the method prescribed in IS 686 : 1985 shall be considered as referee method.)	-	0	Charges already listed above
Cl.4.1.2 Binding Material(IS 1954 : 1990) (IS1969 : 1985)(Cotton tape NEWAR used as binding material shall conform to the requirements prescribed in col 3 of Table 2, when tested in accordance with the methods referred to in col 4 of the table.)	-	0	Charges already listed above
Cl.4.1.3.1( Sewing thread cotton, manmade or blended shall be used for stitching of upper. For cotton variety thread shall conform to variety No. 28 of IS 1720. Polyester variety thread shall conform to variety No. 9 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification. Sewing thread cotton, manmade or blended shall be used for binding of upper. For cotton variety thread shall conform to variety No. 32 of IS 1720. Polyester variety thread shall conform to variety No. 5 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification.')	-	0	Charges already listed above
Cl.4.1.4(.Brass, steel or aluminium eyelets of 7.5 mm diameter and wall thickness 0.30 to 0.35 mm shall be used.')	-	0	Charges already listed above
Cl.4.1.5 Laces( The shoes shall be provided with fabric braided laces either matching the shade of the upper or black or The length of the lace shall be 60 ± 3 cm )	-	0	Charges already listed above
Cl.4.1.5 Laces(and shallhave the breaking strength of not less than 250 N when tested between 18 cm grips in accordance with IS 1969 : 1985, the rate of traverse of power actuated grip being 300 mm/min.)	-	0	Charges already listed above
Cl.4.1.5 Laces Annex B(In case the laces are black, the same shall pass the test for freedom from sulpher dyes when tested in accordance with Annex B. The two ends of the lace shall be provided with suitable metal or plastic tips.)	-	0	Charges already listed above
Cl.4.1.6 Rubber Components(The rubber components shall conform to the requirements given in Table 4, when tested from finished boots.However in case it is not possible to cut the test pieces from the made up boots then 4.1.5.3 of IS 13695 : 1993 shall be followed.')	-	0	Charges already listed above
Cl.4.1.6.2 Ageing col 4 of Table 5.(The shoes shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the shoes shall conform to the physical requirements prescribed in col 4 of Table 5. )	-	0	Charges already listed above
Cl.4.1.6.2 Ageing (None of the rubber components of the shoes shall show any sign of tackiness or crack developed after ageing, when examined visually)	-	0	Charges already listed above
Cl.'4.3.2( Back of the upper shall be reinforced with a strip of upper material when there is a seam.')	-	0	Charges already listed above
Cl.4.3.3(he number of stitches shall be 30 to 40 per decimetre. The counter binding shall meet the binding of the upper at the centre top edge of the heel.)	-	0	Charges already listed above
Cl.4.3.4 (The vantp shall be strengthened with a rubber toe-cap (see Fig. 1).)	-	0	Charges already listed above
Cl.4.3.5( Five pairs of eyelets shall be fitted in each shoe. The eyelets shall be properly clenched without any distortion. It shall properly match the colour of the upper canvas, or as agreed to between the purchaser and the supplier.)	-	0	Charges already listed above
Cl.4.3.6( The shoes shall be free from folds, wrinkles in the upper, blisters, embedded foreign matters and excessive surface markings. In appearance, general workmanship, finish and all other respects, not defined in the standard, the shoes shall be similar to the sample approved by the purchaser, if any)	-	0	Charges already listed above
CL.4.3.7( The soles shall be of even substance and ofone layer only.)	-	0	Charges already listed above
Cl.4.3.8( A rubber foxing shall be fixed all round the sole and heel. The colour shall be as agreed to between the purchaser and the supplier. )	-	0	Charges already listed above
Cl.4.4 Adhesion Test(From the upper-foxing portion where it is adhered to the canvas, parallel to the waist of sole, cut a strip of length 100 mm and width 8 mm. Separate out the plies initially by breaking the bond to a length of about 75 mm. Carry out the test on two specimens in accordance with IS 3400 (Part 5) : 1986. There shall be no further separation within 1 minute at a load of 1 kg for each of the two specimens.)	-	0	Charges already listed above
Cl.4.5 Consolidation Test IS 3400 (Part 5) : 1986 (From the quarter, cut a strip of 25.0 ± 0.5 mm width along the leagth of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30N (3.0 kgf) for each of the teat piecea (see Note under 4.4).')	-	0	Charges already listed above
CL.4.6 Mass(The mass of one pair of finished shoes of size 8 shall not exceed 750 g with an increase or decrease of 25 g for each bigger or smaller size respectively)	-	0	Charges already listed above
Cl.4.5 Consolidation Test IS 3400 (Part 5) : 1986 (From the quarter, cut a strip of 25.0 ± 0.5 mm width along the leagth of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30N (3.0 kgf) for each of the teat piecea (see Note under 4.4).')	-	0	Charges already listed above
Cl.4.1.2.1 Anmex B.(Cotton, manmade or blended shall be used as binding material.' 'Coloured cotton tapes shall have fastness to day light of rating as and if agreed to between the purchaser and the supplier when tested in accordance with IS 686 : 1985. The black tapes shall be free from sulphur dyes when tested in accordance with Annex B.')	-	0	Charges already listed above
Cl.4.1.3.2 (IS 2454 : 1985) IS 765 : 1979 IS 971 : 1966( The colour of the threads shall be as agreedto between the purchaser and the supplier. The dyed threads shall conform to the following requirements or IS 686 : 1985'.)	-	0	Charges already listed above
CL.4.2 Shape and Design IS 1638 : 1969(Cl 4.2.1 The shoes shall be made according to design and pattern as agreed to between the purchaser and the supplier. Size and fittings of the shoes shall be in accordance with IS 1638 : 1969 unless otherwise specified by the purchaser.)	-	0	Charges already listed above
Cl.4.2.2( The recommended design of canvas shoes is shown in Fig. 1.)	-	0	Charges already listed above
Cl.4.3 Construction Cl 4.3.1( The upper shall be stitched on a lock stitch machine and the number of stitches shall be 30 to 40 per dm.)	-	0	Charges already listed above
4.1.2(Colorfastness to washing)	-	0	Charges already listed above
Cl.4.3.3(The edges of quarter shall be bound with dyed cotton binding material or matching to the colour of the upper, cut in bias and formed as a tape.)	-	0	Charges already listed above
Cl.4.3.8(The foxing, not less than 18 mm wide, shall not extend beyond the edges of the sole at the bottom)	-	0	Charges already listed above
Cl.4.4 Adhesion Test(From the upper-foxing portion where it is adhered to the canvas, parallel to the waist of sole, cut a strip of length 100 mm and width 8 mm. Separate out the plies initially by breaking the bond to a length of about 75 mm. Carry out the test on two specimens in accordance with IS 3400 (Part 5) : 1986. There shall be no further separation within 1 minute at a load of 1 kg for each of the two specimens.)	-	0	Charges already listed above
4.1.1 Upper, Sl No. (i) of Table 1(The upper shall consist of over layer of cotton, manmade or blended conforming' to the requirements given in Sl No. (i) of Table 1 as an overlayer and cotton drill conforming to the requirements given in Sl No. (ii) of Table 1, as an inner layer or lining. The two fabrics shall be firmly adhered together with rubber compound. )	-	0	Charges already listed above
Cl.4.1.1.1 Colour fastness(The dyed fabrics prescribed in 4.1.1 shall be fast todaylight and mechanical washing. Fastness to daylight shall be of rating 4 or better, when tested in accordance with IS 686 : 1985 or IS 2454: 1985. However in case of dispute the method prescribed in IS 686 : 1985 shall be considered as referee method.)	-	0	Charges already listed above
Cl.4.1.2.1 Anmex B.(Cotton, manmade or blended shall be used as binding material.' 'Coloured cotton tapes shall have fastness to day light of rating as and if agreed to between the purchaser and the supplier when tested in accordance with IS 686 : 1985. The black tapes shall be free from sulphur dyes when tested in accordance with Annex B.')	-	0	Charges already listed above
Cl.4.1.3.1( Sewing thread cotton, manmade or blended shall be used for stitching of upper. For cotton variety thread shall conform to variety No. 28 of IS 1720. Polyester variety thread shall conform to variety No. 9 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification. Sewing thread cotton, manmade or blended shall be used for binding of upper. For cotton variety thread shall conform to variety No. 32 of IS 1720. Polyester variety thread shall conform to variety No. 5 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification.')	-	0	Charges already listed above
Cl.4.1.3.2 (IS 2454 : 1985) IS 765 : 1979 IS 971 : 1966( The colour of the threads shall be as agreedto between the purchaser and the supplier. The dyed threads shall conform to the following requirements or IS 686 : 1985'.)	-	0	Charges already listed above
Cl.4.1.4(.Brass, steel or aluminium eyelets of 7.5 mm diameter and wall thickness 0.30 to 0.35 mm shall be used.')	-	0	Charges already listed above
Cl.4.1.5 Laces( The shoes shall be provided with fabric braided laces either matching the shade of the upper or black or The length of the lace shall be 60 ± 3 cm )	-	0	Charges already listed above
Cl.4.1.5 Laces(and shallhave the breaking strength of not less than 250 N when tested between 18 cm grips in accordance with IS 1969 : 1985, the rate of traverse of power actuated grip being 300 mm/min.)	-	0	Charges already listed above
Cl.4.1.5 Laces Annex B(In case the laces are black, the same shall pass the test for freedom from sulpher dyes when tested in accordance with Annex B. The two ends of the lace shall be provided with suitable metal or plastic tips.)	-	0	Charges already listed above
Cl.4.1.6 Rubber Components(The rubber components shall conform to the requirements given in Table 4, when tested from finished boots.However in case it is not possible to cut the test pieces from the made up boots then 4.1.5.3 of IS 13695 : 1993 shall be followed.')	-	0	Charges already listed above
Cl.4.1.6.2 Ageing col 4 of Table 5.(The shoes shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the shoes shall conform to the physical requirements prescribed in col 4 of Table 5. )	-	0	Charges already listed above
Cl.4.1.6.2 Ageing (None of the rubber components of the shoes shall show any sign of tackiness or crack developed after ageing, when examined visually)	-	0	Charges already listed above
Cl.4.1.6.3 Thickness of components in Table 6.(Individual components of the shoes shall comply with the thickness and material requirements prescribed in Table 6.)	-	0	Charges already listed above
CL.4.2 Shape and Design IS 1638 : 1969(Cl 4.2.1 The shoes shall be made according to design and pattern as agreed to between the purchaser and the supplier. Size and fittings of the shoes shall be in accordance with IS 1638 : 1969 unless otherwise specified by the purchaser.)	-	0	Charges already listed above
Cl.4.2.2( The recommended design of canvas shoes is shown in Fig. 1.)	-	0	Charges already listed above
Cl.4.3 Construction Cl 4.3.1( The upper shall be stitched on a lock stitch machine and the number of stitches shall be 30 to 40 per dm.)	-	0	Charges already listed above
Cl.'4.3.2( Back of the upper shall be reinforced with a strip of upper material when there is a seam.')	-	0	Charges already listed above
Cl.4.3.3( The counter shall be stitched at the back, set from bottom of lining and bound flat on top edge with white/scoured binding material cut in bias and formed as a tape. T )	-	0	Charges already listed above
Cl.4.3.3(he number of stitches shall be 30 to 40 per decimetre. The counter binding shall meet the binding of the upper at the centre top edge of the heel.)	-	0	Charges already listed above
Cl.4.3.3(The edges of quarter shall be bound with dyed cotton binding material or matching to the colour of the upper, cut in bias and formed as a tape.)	-	0	Charges already listed above
Cl.4.3.4 (The vantp shall be strengthened with a rubber toe-cap (see Fig. 1).)	-	0	Charges already listed above
Cl.4.3.5( Five pairs of eyelets shall be fitted in each shoe. The eyelets shall be properly clenched without any distortion. It shall properly match the colour of the upper canvas, or as agreed to between the purchaser and the supplier.)	-	0	Charges already listed above
Cl.4.3.6( The shoes shall be free from folds, wrinkles in the upper, blisters, embedded foreign matters and excessive surface markings. In appearance, general workmanship, finish and all other respects, not defined in the standard, the shoes shall be similar to the sample approved by the purchaser, if any)	-	0	Charges already listed above
CL.4.3.7( The soles shall be of even substance and ofone layer only.)	-	0	Charges already listed above
Cl.4.3.8( A rubber foxing shall be fixed all round the sole and heel. The colour shall be as agreed to between the purchaser and the supplier. )	-	0	Charges already listed above
Cl.4.3.8(The foxing, not less than 18 mm wide, shall not extend beyond the edges of the sole at the bottom)	-	0	Charges already listed above
CL.4.6 Mass(The mass of one pair of finished shoes of size 8 shall not exceed 750 g with an increase or decrease of 25 g for each bigger or smaller size respectively)	-	0	Charges already listed above
Cl.4.5 Consolidation Test IS 3400 (Part 5) : 1986 (From the quarter, cut a strip of 25.0 ± 0.5 mm width along the leagth of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30N (3.0 kgf) for each of the teat piecea (see Note under 4.4).')	-	0	Charges already listed above
4.1.1 Upper, Sl No. (i) of Table 1(The upper shall consist of over layer of cotton, manmade or blended conforming' to the requirements given in Sl No. (i) of Table 1 as an overlayer and cotton drill conforming to the requirements given in Sl No. (ii) of Table 1, as an inner layer or lining. The two fabrics shall be firmly adhered together with rubber compound. )	-	0	Charges already listed above
Cl.4.1.1.1 Colour fastness(The dyed fabrics prescribed in 4.1.1 shall be fast todaylight and mechanical washing. Fastness to daylight shall be of rating 4 or better, when tested in accordance with IS 686 : 1985 or IS 2454: 1985. However in case of dispute the method prescribed in IS 686 : 1985 shall be considered as referee method.)	-	0	Charges already listed above
Cl.4.1.2 Binding Material(IS 1954 : 1990) (IS1969 : 1985)(Cotton tape NEWAR used as binding material shall conform to the requirements prescribed in col 3 of Table 2, when tested in accordance with the methods referred to in col 4 of the table.)	-	0	Charges already listed above
Cl.4.1.2.1 Anmex B.(Cotton, manmade or blended shall be used as binding material.' 'Coloured cotton tapes shall have fastness to day light of rating as and if agreed to between the purchaser and the supplier when tested in accordance with IS 686 : 1985. The black tapes shall be free from sulphur dyes when tested in accordance with Annex B.')	-	0	Charges already listed above
Cl.4.1.3.1( Sewing thread cotton, manmade or blended shall be used for stitching of upper. For cotton variety thread shall conform to variety No. 28 of IS 1720. Polyester variety thread shall conform to variety No. 9 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification. Sewing thread cotton, manmade or blended shall be used for binding of upper. For cotton variety thread shall conform to variety No. 32 of IS 1720. Polyester variety thread shall conform to variety No. 5 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification.')	-	0	Charges already listed above
Cl.4.1.3.2 (IS 2454 : 1985) IS 765 : 1979 IS 971 : 1966( The colour of the threads shall be as agreedto between the purchaser and the supplier. The dyed threads shall conform to the following requirements or IS 686 : 1985'.)	-	0	Charges already listed above
Cl.4.1.4(.Brass, steel or aluminium eyelets of 7.5 mm diameter and wall thickness 0.30 to 0.35 mm shall be used.')	-	0	Charges already listed above
Cl.4.1.5 Laces( The shoes shall be provided with fabric braided laces either matching the shade of the upper or black or The length of the lace shall be 60 ± 3 cm )	-	0	Charges already listed above
Cl.4.1.5 Laces(and shallhave the breaking strength of not less than 250 N when tested between 18 cm grips in accordance with IS 1969 : 1985, the rate of traverse of power actuated grip being 300 mm/min.)	-	0	Charges already listed above
Cl.4.1.5 Laces Annex B(In case the laces are black, the same shall pass the test for freedom from sulpher dyes when tested in accordance with Annex B. The two ends of the lace shall be provided with suitable metal or plastic tips.)	-	0	Charges already listed above
Cl.4.1.6 Rubber Components(The rubber components shall conform to the requirements given in Table 4, when tested from finished boots.However in case it is not possible to cut the test pieces from the made up boots then 4.1.5.3 of IS 13695 : 1993 shall be followed.')	-	0	Charges already listed above
Cl.4.1.6.2 Ageing col 4 of Table 5.(The shoes shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the shoes shall conform to the physical requirements prescribed in col 4 of Table 5. )	-	0	Charges already listed above
Cl.4.1.6.2 Ageing (None of the rubber components of the shoes shall show any sign of tackiness or crack developed after ageing, when examined visually)	-	0	Charges already listed above
Cl.4.1.6.3 Thickness of components in Table 6.(Individual components of the shoes shall comply with the thickness and material requirements prescribed in Table 6.)	-	0	Charges already listed above
CL.4.2 Shape and Design IS 1638 : 1969(Cl 4.2.1 The shoes shall be made according to design and pattern as agreed to between the purchaser and the supplier. Size and fittings of the shoes shall be in accordance with IS 1638 : 1969 unless otherwise specified by the purchaser.)	-	0	Charges already listed above
Cl.4.2.2( The recommended design of canvas shoes is shown in Fig. 1.)	-	0	Charges already listed above
Cl.4.3 Construction Cl 4.3.1( The upper shall be stitched on a lock stitch machine and the number of stitches shall be 30 to 40 per dm.)	-	0	Charges already listed above
Cl.'4.3.2( Back of the upper shall be reinforced with a strip of upper material when there is a seam.')	-	0	Charges already listed above
Cl.4.3.3( The counter shall be stitched at the back, set from bottom of lining and bound flat on top edge with white/scoured binding material cut in bias and formed as a tape. T )	-	0	Charges already listed above
Cl.4.3.3(he number of stitches shall be 30 to 40 per decimetre. The counter binding shall meet the binding of the upper at the centre top edge of the heel.)	-	0	Charges already listed above
Cl.4.3.3(The edges of quarter shall be bound with dyed cotton binding material or matching to the colour of the upper, cut in bias and formed as a tape.)	-	0	Charges already listed above
Cl.4.3.4 (The vantp shall be strengthened with a rubber toe-cap (see Fig. 1).)	-	0	Charges already listed above
Cl.4.3.5( Five pairs of eyelets shall be fitted in each shoe. The eyelets shall be properly clenched without any distortion. It shall properly match the colour of the upper canvas, or as agreed to between the purchaser and the supplier.)	-	0	Charges already listed above
Cl.4.3.6( The shoes shall be free from folds, wrinkles in the upper, blisters, embedded foreign matters and excessive surface markings. In appearance, general workmanship, finish and all other respects, not defined in the standard, the shoes shall be similar to the sample approved by the purchaser, if any)	-	0	Charges already listed above
CL.4.3.7( The soles shall be of even substance and ofone layer only.)	-	0	Charges already listed above
Cl.4.3.8( A rubber foxing shall be fixed all round the sole and heel. The colour shall be as agreed to between the purchaser and the supplier. )	-	0	Charges already listed above
Cl.4.3.8(The foxing, not less than 18 mm wide, shall not extend beyond the edges of the sole at the bottom)	-	0	Charges already listed above
Cl.4.4 Adhesion Test(From the upper-foxing portion where it is adhered to the canvas, parallel to the waist of sole, cut a strip of length 100 mm and width 8 mm. Separate out the plies initially by breaking the bond to a length of about 75 mm. Carry out the test on two specimens in accordance with IS 3400 (Part 5) : 1986. There shall be no further separation within 1 minute at a load of 1 kg for each of the two specimens.)	-	0	Charges already listed above
CL.4.6 Mass(The mass of one pair of finished shoes of size 8 shall not exceed 750 g with an increase or decrease of 25 g for each bigger or smaller size respectively)	-	0	Charges already listed above
4.8(Adhesion )	-	0	Charges already listed above
4.7(Consolidation test )	-	0	Charges already listed above
4.6(Mass )	-	0	Charges already listed above
4.5(Finish )	-	0	Charges already listed above
4.4(Contruction )	-	0	Charges already listed above
4.3(Leg Height )	-	0	Charges already listed above
4.2(Design )	-	0	Charges already listed above
4.1.6.2(Thickness of components )	-	0	Charges already listed above
4.1.6.2(Ageing)	-	0	Charges already listed above
4.1.6.2(Elongation at break after ageing )	-	0	Charges already listed above
4.1.6.2(Tensile after ageing )	-	0	Charges already listed above
4.1.6(Compression set )	-	0	Charges already listed above
4.1.6(Elongation at break )	-	0	Charges already listed above
4.1.6(Tensile strength)	-	0	Charges already listed above
4.1.6(Hardness (after accelerated ))	-	0	Charges already listed above
4.1.6(Flexing resistance test)	-	0	Charges already listed above
4.1.6(Hardness )	-	0	Charges already listed above
4.1.6(Relative density)	-	0	Charges already listed above
4.1.5(Sulpher dyes content )	-	0	Charges already listed above
4.1.5(Breaking Load )	-	0	Charges already listed above
4.1.5(Length )	-	0	Charges already listed above
4.1.4(Thickness)	-	0	Charges already listed above
4.1.4(Size )	-	0	Charges already listed above
4.1.3(Color fastness to perspiration)	-	0	Charges already listed above
4.1.3(Colorfastness to washing)	-	0	Charges already listed above
4.1.3(Colorfastness to light )	-	0	Charges already listed above
4.1.3(Single thread breaking load)	-	0	Charges already listed above
4.1.3(Construction )	-	0	Charges already listed above
4.1.2(Colorfastness to light )	-	0	Charges already listed above
Cl.4.3.3( The counter shall be stitched at the back, set from bottom of lining and bound flat on top edge with white/scoured binding material cut in bias and formed as a tape. T )	-	0	Charges already listed above
4.1.2(Breaking Strength )	-	0	Charges already listed above
4.1.2(Width )	-	0	Charges already listed above
4.1.1.2(Colorfastness to washing)	-	0	Charges already listed above
4.1.1.1(Colorfastness to light )	-	0	Charges already listed above
4.1.1 (Drill) (End & Picks/dm)	-	0	Charges already listed above
4.1.1 (Drill) (Colorfastness to light )	-	0	Charges already listed above
4.1.1 (canvas )(End & Picks/dm)	-	0	Charges already listed above
4.1.1 (canvas )(Breaking Load )	-	0	Charges already listed above
5, 5.1, Cl. 5.2, Cl. 5.2.1, Cl. 5.2.1.1(Packing and marking)	-	0	Charges already listed above
" CL. 5.1, Cl. 5.2, Cl. 5.2.1, Cl. 5.2.1.1(Packing and marking ")	-	0	Charges already listed above
Cl.4.1.6.3 Thickness of components in Table 6.(Individual components of the shoes shall comply with the thickness and material requirements prescribed in Table 6.)	-	0	Charges already listed above
Cl.4.1.2 Binding Material(IS 1954 : 1990) (IS1969 : 1985)(Cotton tape NEWAR used as binding material shall conform to the requirements prescribed in col 3 of Table 2, when tested in accordance with the methods referred to in col 4 of the table.)	-	0	Charges already listed above
4.1.1 Upper, Sl No. (i) of Table 1(The upper shall consist of over layer of cotton, manmade or blended conforming' to the requirements given in Sl No. (i) of Table 1 as an overlayer and cotton drill conforming to the requirements given in Sl No. (ii) of Table 1, as an inner layer or lining. The two fabrics shall be firmly adhered together with rubber compound. )	-	0	Charges already listed above
Cl.4.1.1.1 Colour fastness(The dyed fabrics prescribed in 4.1.1 shall be fast todaylight and mechanical washing. Fastness to daylight shall be of rating 4 or better, when tested in accordance with IS 686 : 1985 or IS 2454: 1985. However in case of dispute the method prescribed in IS 686 : 1985 shall be considered as referee method.)	-	0	Charges already listed above
Cl.4.1.2 Binding Material(IS 1954 : 1990) (IS1969 : 1985)(Cotton tape NEWAR used as binding material shall conform to the requirements prescribed in col 3 of Table 2, when tested in accordance with the methods referred to in col 4 of the table.)	-	0	Charges already listed above
Cl.4.1.3.1( Sewing thread cotton, manmade or blended shall be used for stitching of upper. For cotton variety thread shall conform to variety No. 28 of IS 1720. Polyester variety thread shall conform to variety No. 9 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification. Sewing thread cotton, manmade or blended shall be used for binding of upper. For cotton variety thread shall conform to variety No. 32 of IS 1720. Polyester variety thread shall conform to variety No. 5 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification.')	-	0	Charges already listed above
Cl.4.1.4(.Brass, steel or aluminium eyelets of 7.5 mm diameter and wall thickness 0.30 to 0.35 mm shall be used.')	-	0	Charges already listed above
Cl.4.1.5 Laces( The shoes shall be provided with fabric braided laces either matching the shade of the upper or black or The length of the lace shall be 60 ± 3 cm )	-	0	Charges already listed above
Cl.4.1.5 Laces(and shallhave the breaking strength of not less than 250 N when tested between 18 cm grips in accordance with IS 1969 : 1985, the rate of traverse of power actuated grip being 300 mm/min.)	-	0	Charges already listed above
Cl.4.1.5 Laces Annex B(In case the laces are black, the same shall pass the test for freedom from sulpher dyes when tested in accordance with Annex B. The two ends of the lace shall be provided with suitable metal or plastic tips.)	-	0	Charges already listed above
Cl.4.1.6 Rubber Components(The rubber components shall conform to the requirements given in Table 4, when tested from finished boots.However in case it is not possible to cut the test pieces from the made up boots then 4.1.5.3 of IS 13695 : 1993 shall be followed.')	-	0	Charges already listed above
Cl.4.1.6.2 Ageing col 4 of Table 5.(The shoes shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the shoes shall conform to the physical requirements prescribed in col 4 of Table 5. )	-	0	Charges already listed above
Cl.4.1.6.2 Ageing (None of the rubber components of the shoes shall show any sign of tackiness or crack developed after ageing, when examined visually)	-	0	Charges already listed above
Cl.'4.3.2( Back of the upper shall be reinforced with a strip of upper material when there is a seam.')	-	0	Charges already listed above
Cl.4.3.3(he number of stitches shall be 30 to 40 per decimetre. The counter binding shall meet the binding of the upper at the centre top edge of the heel.)	-	0	Charges already listed above
Cl.4.3.4 (The vantp shall be strengthened with a rubber toe-cap (see Fig. 1).)	-	0	Charges already listed above
Cl.4.3.5( Five pairs of eyelets shall be fitted in each shoe. The eyelets shall be properly clenched without any distortion. It shall properly match the colour of the upper canvas, or as agreed to between the purchaser and the supplier.)	-	0	Charges already listed above
Cl.4.3.6( The shoes shall be free from folds, wrinkles in the upper, blisters, embedded foreign matters and excessive surface markings. In appearance, general workmanship, finish and all other respects, not defined in the standard, the shoes shall be similar to the sample approved by the purchaser, if any)	-	0	Charges already listed above
CL.4.3.7( The soles shall be of even substance and ofone layer only.)	-	0	Charges already listed above
Cl.4.3.8( A rubber foxing shall be fixed all round the sole and heel. The colour shall be as agreed to between the purchaser and the supplier. )	-	0	Charges already listed above
Cl.4.4 Adhesion Test(From the upper-foxing portion where it is adhered to the canvas, parallel to the waist of sole, cut a strip of length 100 mm and width 8 mm. Separate out the plies initially by breaking the bond to a length of about 75 mm. Carry out the test on two specimens in accordance with IS 3400 (Part 5) : 1986. There shall be no further separation within 1 minute at a load of 1 kg for each of the two specimens.)	-	0	Charges already listed above
Cl.4.5 Consolidation Test IS 3400 (Part 5) : 1986 (From the quarter, cut a strip of 25.0 ± 0.5 mm width along the leagth of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30N (3.0 kgf) for each of the teat piecea (see Note under 4.4).')	-	0	Charges already listed above
CL.4.6 Mass(The mass of one pair of finished shoes of size 8 shall not exceed 750 g with an increase or decrease of 25 g for each bigger or smaller size respectively)	-	0	Charges already listed above
Cl.4.5 Consolidation Test IS 3400 (Part 5) : 1986 (From the quarter, cut a strip of 25.0 ± 0.5 mm width along the leagth of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30N (3.0 kgf) for each of the teat piecea (see Note under 4.4).')	-	0	Charges already listed above
Cl.4.1.2.1 Anmex B.(Cotton, manmade or blended shall be used as binding material.' 'Coloured cotton tapes shall have fastness to day light of rating as and if agreed to between the purchaser and the supplier when tested in accordance with IS 686 : 1985. The black tapes shall be free from sulphur dyes when tested in accordance with Annex B.')	-	0	Charges already listed above
Cl.4.1.3.2 (IS 2454 : 1985) IS 765 : 1979 IS 971 : 1966( The colour of the threads shall be as agreedto between the purchaser and the supplier. The dyed threads shall conform to the following requirements or IS 686 : 1985'.)	-	0	Charges already listed above
CL.4.2 Shape and Design IS 1638 : 1969(Cl 4.2.1 The shoes shall be made according to design and pattern as agreed to between the purchaser and the supplier. Size and fittings of the shoes shall be in accordance with IS 1638 : 1969 unless otherwise specified by the purchaser.)	-	0	Charges already listed above
Cl.4.2.2( The recommended design of canvas shoes is shown in Fig. 1.)	-	0	Charges already listed above
Cl.4.3 Construction Cl 4.3.1( The upper shall be stitched on a lock stitch machine and the number of stitches shall be 30 to 40 per dm.)	-	0	Charges already listed above
4.1.2(Colorfastness to washing)	-	0	Charges already listed above
Cl.4.3.3(The edges of quarter shall be bound with dyed cotton binding material or matching to the colour of the upper, cut in bias and formed as a tape.)	-	0	Charges already listed above
Cl.4.3.8(The foxing, not less than 18 mm wide, shall not extend beyond the edges of the sole at the bottom)	-	0	Charges already listed above
Cl.4.4 Adhesion Test(From the upper-foxing portion where it is adhered to the canvas, parallel to the waist of sole, cut a strip of length 100 mm and width 8 mm. Separate out the plies initially by breaking the bond to a length of about 75 mm. Carry out the test on two specimens in accordance with IS 3400 (Part 5) : 1986. There shall be no further separation within 1 minute at a load of 1 kg for each of the two specimens.)	-	0	Charges already listed above
4.1.1 Upper, Sl No. (i) of Table 1(The upper shall consist of over layer of cotton, manmade or blended conforming' to the requirements given in Sl No. (i) of Table 1 as an overlayer and cotton drill conforming to the requirements given in Sl No. (ii) of Table 1, as an inner layer or lining. The two fabrics shall be firmly adhered together with rubber compound. )	-	0	Charges already listed above
Cl.4.1.1.1 Colour fastness(The dyed fabrics prescribed in 4.1.1 shall be fast todaylight and mechanical washing. Fastness to daylight shall be of rating 4 or better, when tested in accordance with IS 686 : 1985 or IS 2454: 1985. However in case of dispute the method prescribed in IS 686 : 1985 shall be considered as referee method.)	-	0	Charges already listed above
Cl.4.1.2.1 Anmex B.(Cotton, manmade or blended shall be used as binding material.' 'Coloured cotton tapes shall have fastness to day light of rating as and if agreed to between the purchaser and the supplier when tested in accordance with IS 686 : 1985. The black tapes shall be free from sulphur dyes when tested in accordance with Annex B.')	-	0	Charges already listed above
Cl.4.1.3.1( Sewing thread cotton, manmade or blended shall be used for stitching of upper. For cotton variety thread shall conform to variety No. 28 of IS 1720. Polyester variety thread shall conform to variety No. 9 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification. Sewing thread cotton, manmade or blended shall be used for binding of upper. For cotton variety thread shall conform to variety No. 32 of IS 1720. Polyester variety thread shall conform to variety No. 5 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification.')	-	0	Charges already listed above
Cl.4.1.3.2 (IS 2454 : 1985) IS 765 : 1979 IS 971 : 1966( The colour of the threads shall be as agreedto between the purchaser and the supplier. The dyed threads shall conform to the following requirements or IS 686 : 1985'.)	-	0	Charges already listed above
Cl.4.1.4(.Brass, steel or aluminium eyelets of 7.5 mm diameter and wall thickness 0.30 to 0.35 mm shall be used.')	-	0	Charges already listed above
Cl.4.1.5 Laces( The shoes shall be provided with fabric braided laces either matching the shade of the upper or black or The length of the lace shall be 60 ± 3 cm )	-	0	Charges already listed above
Cl.4.1.5 Laces(and shallhave the breaking strength of not less than 250 N when tested between 18 cm grips in accordance with IS 1969 : 1985, the rate of traverse of power actuated grip being 300 mm/min.)	-	0	Charges already listed above
Cl.4.1.5 Laces Annex B(In case the laces are black, the same shall pass the test for freedom from sulpher dyes when tested in accordance with Annex B. The two ends of the lace shall be provided with suitable metal or plastic tips.)	-	0	Charges already listed above
Cl.4.1.6 Rubber Components(The rubber components shall conform to the requirements given in Table 4, when tested from finished boots.However in case it is not possible to cut the test pieces from the made up boots then 4.1.5.3 of IS 13695 : 1993 shall be followed.')	-	0	Charges already listed above
Cl.4.1.6.2 Ageing col 4 of Table 5.(The shoes shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the shoes shall conform to the physical requirements prescribed in col 4 of Table 5. )	-	0	Charges already listed above
Cl.4.1.6.2 Ageing (None of the rubber components of the shoes shall show any sign of tackiness or crack developed after ageing, when examined visually)	-	0	Charges already listed above
Cl.4.1.6.3 Thickness of components in Table 6.(Individual components of the shoes shall comply with the thickness and material requirements prescribed in Table 6.)	-	0	Charges already listed above
CL.4.2 Shape and Design IS 1638 : 1969(Cl 4.2.1 The shoes shall be made according to design and pattern as agreed to between the purchaser and the supplier. Size and fittings of the shoes shall be in accordance with IS 1638 : 1969 unless otherwise specified by the purchaser.)	-	0	Charges already listed above
Cl.4.2.2( The recommended design of canvas shoes is shown in Fig. 1.)	-	0	Charges already listed above
Cl.4.3 Construction Cl 4.3.1( The upper shall be stitched on a lock stitch machine and the number of stitches shall be 30 to 40 per dm.)	-	0	Charges already listed above
Cl.'4.3.2( Back of the upper shall be reinforced with a strip of upper material when there is a seam.')	-	0	Charges already listed above
Cl.4.3.3( The counter shall be stitched at the back, set from bottom of lining and bound flat on top edge with white/scoured binding material cut in bias and formed as a tape. T )	-	0	Charges already listed above
Cl.4.3.3(he number of stitches shall be 30 to 40 per decimetre. The counter binding shall meet the binding of the upper at the centre top edge of the heel.)	-	0	Charges already listed above
Cl.4.3.3(The edges of quarter shall be bound with dyed cotton binding material or matching to the colour of the upper, cut in bias and formed as a tape.)	-	0	Charges already listed above
Cl.4.3.4 (The vantp shall be strengthened with a rubber toe-cap (see Fig. 1).)	-	0	Charges already listed above
Cl.4.3.5( Five pairs of eyelets shall be fitted in each shoe. The eyelets shall be properly clenched without any distortion. It shall properly match the colour of the upper canvas, or as agreed to between the purchaser and the supplier.)	-	0	Charges already listed above
Cl.4.3.6( The shoes shall be free from folds, wrinkles in the upper, blisters, embedded foreign matters and excessive surface markings. In appearance, general workmanship, finish and all other respects, not defined in the standard, the shoes shall be similar to the sample approved by the purchaser, if any)	-	0	Charges already listed above
CL.4.3.7( The soles shall be of even substance and ofone layer only.)	-	0	Charges already listed above
Cl.4.3.8( A rubber foxing shall be fixed all round the sole and heel. The colour shall be as agreed to between the purchaser and the supplier. )	-	0	Charges already listed above
Cl.4.3.8(The foxing, not less than 18 mm wide, shall not extend beyond the edges of the sole at the bottom)	-	0	Charges already listed above
CL.4.6 Mass(The mass of one pair of finished shoes of size 8 shall not exceed 750 g with an increase or decrease of 25 g for each bigger or smaller size respectively)	-	0	Charges already listed above
Cl.4.5 Consolidation Test IS 3400 (Part 5) : 1986 (From the quarter, cut a strip of 25.0 ± 0.5 mm width along the leagth of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30N (3.0 kgf) for each of the teat piecea (see Note under 4.4).')	-	0	Charges already listed above
4.1.1 Upper, Sl No. (i) of Table 1(The upper shall consist of over layer of cotton, manmade or blended conforming' to the requirements given in Sl No. (i) of Table 1 as an overlayer and cotton drill conforming to the requirements given in Sl No. (ii) of Table 1, as an inner layer or lining. The two fabrics shall be firmly adhered together with rubber compound. )	-	0	Charges already listed above
Cl.4.1.1.1 Colour fastness(The dyed fabrics prescribed in 4.1.1 shall be fast todaylight and mechanical washing. Fastness to daylight shall be of rating 4 or better, when tested in accordance with IS 686 : 1985 or IS 2454: 1985. However in case of dispute the method prescribed in IS 686 : 1985 shall be considered as referee method.)	-	0	Charges already listed above
Cl.4.1.2 Binding Material(IS 1954 : 1990) (IS1969 : 1985)(Cotton tape NEWAR used as binding material shall conform to the requirements prescribed in col 3 of Table 2, when tested in accordance with the methods referred to in col 4 of the table.)	-	0	Charges already listed above
Cl.4.1.2.1 Anmex B.(Cotton, manmade or blended shall be used as binding material.' 'Coloured cotton tapes shall have fastness to day light of rating as and if agreed to between the purchaser and the supplier when tested in accordance with IS 686 : 1985. The black tapes shall be free from sulphur dyes when tested in accordance with Annex B.')	-	0	Charges already listed above
Cl.4.1.3.1( Sewing thread cotton, manmade or blended shall be used for stitching of upper. For cotton variety thread shall conform to variety No. 28 of IS 1720. Polyester variety thread shall conform to variety No. 9 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification. Sewing thread cotton, manmade or blended shall be used for binding of upper. For cotton variety thread shall conform to variety No. 32 of IS 1720. Polyester variety thread shall conform to variety No. 5 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification.')	-	0	Charges already listed above
Cl.4.1.3.2 (IS 2454 : 1985) IS 765 : 1979 IS 971 : 1966( The colour of the threads shall be as agreedto between the purchaser and the supplier. The dyed threads shall conform to the following requirements or IS 686 : 1985'.)	-	0	Charges already listed above
Cl.4.1.4(.Brass, steel or aluminium eyelets of 7.5 mm diameter and wall thickness 0.30 to 0.35 mm shall be used.')	-	0	Charges already listed above
Cl.4.1.5 Laces( The shoes shall be provided with fabric braided laces either matching the shade of the upper or black or The length of the lace shall be 60 ± 3 cm )	-	0	Charges already listed above
Cl.4.1.5 Laces(and shallhave the breaking strength of not less than 250 N when tested between 18 cm grips in accordance with IS 1969 : 1985, the rate of traverse of power actuated grip being 300 mm/min.)	-	0	Charges already listed above
Cl.4.1.5 Laces Annex B(In case the laces are black, the same shall pass the test for freedom from sulpher dyes when tested in accordance with Annex B. The two ends of the lace shall be provided with suitable metal or plastic tips.)	-	0	Charges already listed above
Cl.4.1.6 Rubber Components(The rubber components shall conform to the requirements given in Table 4, when tested from finished boots.However in case it is not possible to cut the test pieces from the made up boots then 4.1.5.3 of IS 13695 : 1993 shall be followed.')	-	0	Charges already listed above
Cl.4.1.6.2 Ageing col 4 of Table 5.(The shoes shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the shoes shall conform to the physical requirements prescribed in col 4 of Table 5. )	-	0	Charges already listed above
Cl.4.1.6.2 Ageing (None of the rubber components of the shoes shall show any sign of tackiness or crack developed after ageing, when examined visually)	-	0	Charges already listed above
Cl.4.1.6.3 Thickness of components in Table 6.(Individual components of the shoes shall comply with the thickness and material requirements prescribed in Table 6.)	-	0	Charges already listed above
CL.4.2 Shape and Design IS 1638 : 1969(Cl 4.2.1 The shoes shall be made according to design and pattern as agreed to between the purchaser and the supplier. Size and fittings of the shoes shall be in accordance with IS 1638 : 1969 unless otherwise specified by the purchaser.)	-	0	Charges already listed above
Cl.4.2.2( The recommended design of canvas shoes is shown in Fig. 1.)	-	0	Charges already listed above
Cl.4.3 Construction Cl 4.3.1( The upper shall be stitched on a lock stitch machine and the number of stitches shall be 30 to 40 per dm.)	-	0	Charges already listed above
Cl.'4.3.2( Back of the upper shall be reinforced with a strip of upper material when there is a seam.')	-	0	Charges already listed above
Cl.4.3.3( The counter shall be stitched at the back, set from bottom of lining and bound flat on top edge with white/scoured binding material cut in bias and formed as a tape. T )	-	0	Charges already listed above
Cl.4.3.3(he number of stitches shall be 30 to 40 per decimetre. The counter binding shall meet the binding of the upper at the centre top edge of the heel.)	-	0	Charges already listed above
Cl.4.3.3(The edges of quarter shall be bound with dyed cotton binding material or matching to the colour of the upper, cut in bias and formed as a tape.)	-	0	Charges already listed above
Cl.4.3.4 (The vantp shall be strengthened with a rubber toe-cap (see Fig. 1).)	-	0	Charges already listed above
Cl.4.3.5( Five pairs of eyelets shall be fitted in each shoe. The eyelets shall be properly clenched without any distortion. It shall properly match the colour of the upper canvas, or as agreed to between the purchaser and the supplier.)	-	0	Charges already listed above
Cl.4.3.6( The shoes shall be free from folds, wrinkles in the upper, blisters, embedded foreign matters and excessive surface markings. In appearance, general workmanship, finish and all other respects, not defined in the standard, the shoes shall be similar to the sample approved by the purchaser, if any)	-	0	Charges already listed above
CL.4.3.7( The soles shall be of even substance and ofone layer only.)	-	0	Charges already listed above
Cl.4.3.8( A rubber foxing shall be fixed all round the sole and heel. The colour shall be as agreed to between the purchaser and the supplier. )	-	0	Charges already listed above
Cl.4.3.8(The foxing, not less than 18 mm wide, shall not extend beyond the edges of the sole at the bottom)	-	0	Charges already listed above
Cl.4.4 Adhesion Test(From the upper-foxing portion where it is adhered to the canvas, parallel to the waist of sole, cut a strip of length 100 mm and width 8 mm. Separate out the plies initially by breaking the bond to a length of about 75 mm. Carry out the test on two specimens in accordance with IS 3400 (Part 5) : 1986. There shall be no further separation within 1 minute at a load of 1 kg for each of the two specimens.)	-	0	Charges already listed above
CL.4.6 Mass(The mass of one pair of finished shoes of size 8 shall not exceed 750 g with an increase or decrease of 25 g for each bigger or smaller size respectively)	-	0	Charges already listed above
4.8(Adhesion )	-	0	Charges already listed above
4.7(Consolidation test )	-	0	Charges already listed above
4.6(Mass )	-	0	Charges already listed above
4.5(Finish )	-	0	Charges already listed above
4.4(Contruction )	-	0	Charges already listed above
4.3(Leg Height )	-	0	Charges already listed above
4.2(Design )	-	0	Charges already listed above
4.1.6.2(Thickness of components )	-	0	Charges already listed above
4.1.6.2(Ageing)	-	0	Charges already listed above
4.1.6.2(Elongation at break after ageing )	-	0	Charges already listed above
4.1.6.2(Tensile after ageing )	-	0	Charges already listed above
4.1.6(Compression set )	-	0	Charges already listed above
4.1.6(Elongation at break )	-	0	Charges already listed above
4.1.6(Tensile strength)	-	0	Charges already listed above
4.1.6(Hardness (after accelerated ))	-	0	Charges already listed above
4.1.6(Flexing resistance test)	-	0	Charges already listed above
4.1.6(Hardness )	-	0	Charges already listed above
4.1.6(Relative density)	-	0	Charges already listed above
4.1.5(Sulpher dyes content )	-	0	Charges already listed above
4.1.5(Breaking Load )	-	0	Charges already listed above
4.1.5(Length )	-	0	Charges already listed above
4.1.4(Thickness)	-	0	Charges already listed above
4.1.4(Size )	-	0	Charges already listed above
4.1.3(Color fastness to perspiration)	-	0	Charges already listed above
4.1.3(Colorfastness to washing)	-	0	Charges already listed above
4.1.3(Colorfastness to light )	-	0	Charges already listed above
4.1.3(Single thread breaking load)	-	0	Charges already listed above
4.1.3(Construction )	-	0	Charges already listed above
4.1.2(Colorfastness to light )	-	0	Charges already listed above
Cl.4.3.3( The counter shall be stitched at the back, set from bottom of lining and bound flat on top edge with white/scoured binding material cut in bias and formed as a tape. T )	-	0	Charges already listed above
4.1.2(Breaking Strength )	-	0	Charges already listed above
4.1.2(Width )	-	0	Charges already listed above
4.1.1.2(Colorfastness to washing)	-	0	Charges already listed above
4.1.1.1(Colorfastness to light )	-	0	Charges already listed above
4.1.1 (Drill) (End & Picks/dm)	-	0	Charges already listed above
4.1.1 (Drill) (Colorfastness to light )	-	0	Charges already listed above
4.1.1 (canvas )(End & Picks/dm)	-	0	Charges already listed above
4.1.1 (canvas )(Breaking Load )	-	0	Charges already listed above
5, 5.1, Cl. 5.2, Cl. 5.2.1, Cl. 5.2.1.1(Packing and marking)	-	0	Charges already listed above
" CL. 5.1, Cl. 5.2, Cl. 5.2.1, Cl. 5.2.1.1(Packing and marking ")	-	0	Charges already listed above
Cl.4.1.6.3 Thickness of components in Table 6.(Individual components of the shoes shall comply with the thickness and material requirements prescribed in Table 6.)	-	0	Charges already listed above
Cl.4.1.2 Binding Material(IS 1954 : 1990) (IS1969 : 1985)(Cotton tape NEWAR used as binding material shall conform to the requirements prescribed in col 3 of Table 2, when tested in accordance with the methods referred to in col 4 of the table.)	-	0	Charges already listed above

31 Dec, 2026

-
Included w.e.f 22.01.2025

12194

CIPET : CSTS - AGARTALA PLASTICS TESTING LABORATORY, (CIPET, AGARTALA)

5173304

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

upto DN 355 mm

39825 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.10(Slow Crack Growth Rate)	-	6000	-
8.9 table-6(Elongation at Break)	-	1600	including specimen preparation charges
8.8(Tensile Strength for Butt-fusion)	-	1600	including specimen preparation charges
8.7(Density)	-	500	-
8.5 (Oxidation Induction Time)	-	2200	-
8.4( Melt Flow Rate)	-	1100	-
8.2(Longitudinal Reversion Test)	-	900	including specimen preparation charges
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	1600	-
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	21400	4000 for 100hr in 27 degree C, 1600 for 48 hrs in 80degree C, 4800 for 165hrs in 80 degree C and 11000 for 1000hrs in 80 degree C
7.4.1.2(Ovality)	-	500	including all dimensional Testings of clause no. 7.4
Cl-7.4(Mean Outside Diameter (For upto 50 mm take 8 reading, above 50mm take 6 reading & average will be reported))	-	500	including all dimensional Testings of clause no. 7.4
7.2(Length)	-	500	including all dimensional Testings of clause no. 7.4
6.2.1(6.1.1 Identification Stripes)	-	250	-
8.6(Overall migration)	-	2000	including specimen preparation charges
8.3(Carbon black)	-	1625	925 for CBC & 700 for CBDC
5.2(Density)	-	500	-
5.2(MFI @ 1900C/5.0 Kg)	-	1100	-
5.2(Volatile matter Content)	-	700	-
Clause 7.3(Coiling)	-	500	-
Clause 8.3(Carbon Black content)	-	925	-
Clause 8.3(Carbon Black Dispersion)	-	700	-
Clause 8.6(Overall migration (stimulate))	-	1700	-
Clause 8.6(Overall migration (surface of material))	-	1700	-
Table-2 (iii, iv)(Thermal Stability (Oxidation Induction Time), Volatile Matter)	-	2200	-

27 Jul, 2026

-
-

12195

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 17425 (2020)

Irrigation Equipment - Quick Coupled Polyethylene Pipes and Fittings for Sprinkler Irrigation Systems - Specification

40 TO 200 MM

64100.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(density shall be between 940.4 kg/m’ and 958.4 kg/m3 (both inclusive) when determined at 27°C according to procedure prescribed in Annex A of IS 7328. The value of the density shall also not differ from the nominal value by more than 3 kg/m2 as per 5.2.1.1 of IS 7328.)	-	1125.00	Testing charge- 500.00 SPECIMEN PREPARATION CHARGE- 625.00
4.1(melt flow rating (MFR) shall not exceed 1.10 g/10 min.)	-	1100.00	-
4.1 .1.2.1(HDPE couplers)	-	4700.00	1. OIT- 2200.00 2. VOLATILE MATTER- 700.00 3. WATER CONTENT- 700.00 4. TENSILE STRENGTH AT YIELD AND ELONGATION AT BREAK- 1100.00 & SPECIMEN PREPARATION CHARGE- 250.00
4.1.4(Holding attachments for coupler parts)	-	1625.00	1. CARBON BLACK CONTENT - 925.00 2. CARBON BLACK DISPERSION - 700.00
5(Dimensions of pipe - i) Outside diameter)	-	750.00	-
6.1(VISUAL APPEARANCE)	-	6325.00	1. OIT- 2200.00 2. VOLATILE MATTER- 700.00 3. WATER CONTENT - 700.00 4. TENSILE STRENGTH @ YIELD AND ELONGATION AT BREAK - 1100.00 & SPECIMEN CHARGE- 250.00 5. CBC- 925.00 6. CBD- 700.00
7.1(Hydraulic Characteristics - Quality test)	-	4800.00	-
7.1(Hydraulic Characteristics - Acceptance test)	-	1600.00	-
7.2(Reversion Test)	-	900.00	Test Charge- 700.00 Specimen Charge- 200.00
7.3(Tensile Test- i) Tensile Strength)	-	1100.00	-
7.4(Fusion Compatibility Test- b) Acceptance test)	-	9700.00	Quality Test @ 80° C for 165 Hrs. 4800.00 Acceptance Test @ 80 °C for 48 Hrs. 1600.00 Corrected Density 500.00 Melt Flow Rate (MFR) 1100.00
Cl.7.2.l(Leakage Test)	-	1500.00	Leakage Test for 1 Hrs. 850.00 Hydraulic proof Test for 1 Hrs. 850.00
7.2.3((a) Acceptance Test (48 hrs) / 80˚ C)	-	6400.00	Quality Test @ 80° C for 165 Hrs. 4800.00 Acceptance Test @ 80 °C for 48 Hrs. 1600.00
7.3(Quick Couple Fitting)	-	6400.00	Quality Test @ 80° C for 165 Hrs. 4800.00 Acceptance Test @ 80 °C for 48 Hrs. 1600.00
7.2.1(Visual and Workmanship Requirement)	-	300.00	-
Cl.4.1.3, T-1(Volatile Matter)	-	700.00	-
Cl.4.1.3, T-1(Water Content)	-	700.00	-
4.1.3, Table 1,(vi)(Minimum tensile strength at yield)	-	1100.00	-
4.1.3, Table 1,(vii)(Minimum elongation at break)	-	0.00	Elongation & Tensile have single charge.
6.2.4(Workmanship and appearance (Visual))	-	300.00	-
6.2.6(Material Identification (Chemical Analysis))	-	1050.00	-
6.2.6(Color)	-	300.00	-
6.2.6(Rubber Ring Hardness Shore – A (Before Ageing))	-	4950.00	Hardness of rubber ring before ageing 375.00 Ageing @ 70° C for 7 days 4200.00 Shore hardness of Rubber Ring after ageing 375.00
5(Dimensions of pipe - ii) Wall thickness minimum)	-	-	-
6(Visual Appearance)	-	-	-
7.3(Tensile Test - ii)Elongation at Break)	-	-	-
7.4(Fusion Compatibility Test- a) Quality test)	-	-	-
7.5(Density)	-	-	-
7.6(Melt Flow Rate)	-	-	-
7.6(Melt Flow Rate)	-	-	-
4.2(Carbon black- a)carbon content)	-	-	-
4.2(Carbon black- b) Dispersion of carbon black)	-	-	-
7.6(Melt now Rate (MFR))	-	-	-
7.5(Density)	-	-	-
7.4 Table-2(Fusion Compatibility Test)	-	-	-
7.3(Tensile Test)	-	-	-
7.2(Reversion Test)	-	-	-
7.1 Table -2(Hydraulic Characteristics)	-	-	-
5.1.2(Ovality)	-	-	-
5.1 table -1(DIMENSIONS OF PIPES)	-	-	-
4.3(Anti-oxidant)	-	-	-
Cl. 4.2 , IS 2530-1963, Cl. 10(Cabon Black Content)	-	-	-
4.1.2(The MFR of the material shall be between 0.2 to 1.1 (both inclusive) when tested at 190 T at a nominal load of 50 N by the method prescribed in 7 of IS 2530. The MFR of the material shall also be within 20% of the value declared by the manufacturer.’)	-	-	-
3(CLASSIFICATION OF PIPES)	-	-	-
4.1(Quick Coupled Male and Female Couplers)	-	-	-
4.1(Quick Coupled Male and Female Couplers)	-	-	-
4.1.3(Workmanship and appearance)	-	-	-
6.1.3(Weldability Test- a) Quality test)	-	-	-
6.1.3(Weldability Test- b) Acceptance test)	-	-	-
3(Quick Coupled pipes)	-	-	-
3(QUICK COUPLED PIPES)	-	-	-
4(QUICK COUPLED FITTINGS)	-	-	-
4.1 (a)(Quick Coupled Male and Female Couplers)	-	-	-
4.1 (b)(HDPE couplers —)	-	-	-
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 10(Cabon Black Content)	-	-	-
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	-	-
4.1 .1.2.2(HDPE couplers)	-	-	-
4.1.4(a)(Holding Attachments for Coupler Parts)	-	-	-
4.1.4(b)(Holding Attachments for Coupler Parts)	-	-	-
4.2.1(Quick Coupled ~pe HDPE Fittings)	-	-	-
4.2.2(Quick Coupled ~pe HDPE Fittings)	-	-	-
4.2.3(Quick Coupled ~pe HDPE Fittings)	-	-	-
4.2.4(Quick Coupled ~pe HDPE Fittings)	-	-	-
4.2.5(Quick Coupled ~pe HDPE Fittings)	-	-	-
4.2.6(Quick Coupled ~pe HDPE Fittings)	-	-	-
4.2.7(Quick Coupled ~pe HDPE Fittings)	-	-	-
4.2.7(1 Dimensions of Quick Coupled Pipes and Fittings)	-	-	-
4.2.7(Reducers Table 1 and 2 of IS 8008 (Part 4))	-	-	-
4.2.7(Ferrule reducers Table 1 of IS 8008 (Part 5))	-	-	-
4.2.7(Pipe ends Table 1 of IS 8008 (Part 6))	-	-	-
4.2.7(End caps Table 1 of IS 8008 (Part 9))	-	-	-
4.2.7(Insert vatve couplers Table 1 of IS 8008 (Part 3))	-	-	-
4.2.7(Valve openers Table 1 of IS 8008 (Part 2))	-	-	-
5.2(Dimensions of Quick Coupled Sprinkler Saddles Table 1.)	-	-	-
6.1(Quick Coupled Pipes and Fittings)	-	-	-
6.1.1, 6.1.1.1(Leakage Test)	-	-	-
6.1.1, 6.1.1.1(Leakage Test)	-	-	-
6.1.2, 6.1.2.1(Hydraulic Proof Test)	-	-	-
6.1.2.2(Hydraulic Proof Test)	-	-	-
6.1.3, 6.1.3.1(Weldability Test)	-	-	-
6.1.3.1.1(Weldability Test)	-	-	-
6.1.3.2(Quick coupled fittings)	-	-	-
6.2, 6.2.1(Quick Coupled Fittings)	-	-	-
6.2 b(Material Identification - Male & Female Coupler)	-	-	-
6.3.3(Material Identification - Insert Valve Coupler)	-	-	-
6.3.3(Material Identification - Insert Valve Coupler)	-	-	-
6.3.5(Material Identification - Saddle)	-	-	-
6.3.5(Material Identification - Pipe Ends)	-	-	-
6.3.6(Quick Coupled Pump Connectors - Visual)	-	-	-
4.2(Metallic Couplers)	-	-	-
4.2(Metallic Couplers)	-	-	-
7.2.1(Leakage Test)	-	-	-
Cl.4.1.3(Den sity Test)	-	-	-
Cl.4.1.3(MFR Test)	-	-	-
Cl.4.1.3(MFR Test)	-	-	-
Cl.4.1.3(MFR Test)	-	-	-
Cl.4.1.3(MFR Test)	-	-	-
Cl.4.1.3(Thermal Stabi lity)	-	-	-
Cl.4.1.3(Thermal Stabi lity)	-	-	-
Cl.4.1.3, T-1(Volatile Matter)	-	-	-
Cl.4.1.3, T-1(Volatile Matter)	-	-	-
Cl.4.1.3, T-1(Volatile Matter)	-	-	-
Cl.4.1.3, T-1(Volatile Matter)	-	-	-
Cl.4.1.3, T-1(Volatile Matter)	-	-	-
Cl.4.1.3, T-1(Volatile Matter)	-	-	-
Cl.4.1.3, T-1(Water Content)	-	-	-
Cl.4.1.3, T-1(Water Content)	-	-	-
Cl.4.1.3, T-1(Water Content)	-	-	-
Cl.4.1.3, T-1(Water Content)	-	-	-
Cl.4.1.3, T-1(Water Content)	-	-	-
Cl.4.1.3, T-1(Water Content)	-	-	-
Cl.4.1.3, T-1(Water Content)	-	-	-
Cl.4.1.3, T-1(Water Content)	-	-	-
Cl.4.1.3, T-1(Water Content)	-	-	-
Cl.4.1.3, T-1(Water Content)	-	-	-
Cl.4.1.3, T-1(Water Content)	-	-	-
Cl.4.1.3, T-1(Water Content)	-	-	-
Cl.4.1.3, T-1(Water Content)	-	-	-
Cl.4.1.3, T-1(Water Content)	-	-	-
Cl.4.1.3, T-1(Water Content)	-	-	-
Cl.4.1.3, T-1(Water Content)	-	-	-
Cl.4.1.4(Carbon Black Content)	-	-	-
Cl.4.1.4(Carbon Black Content)	-	-	-
Cl.4.1.4(Carbon Black Content)	-	-	-
Cl.4.1.4(Carbon Black Di spersion)	-	-	-
Cl.4.1.4(Carbon Black Di spersion)	-	-	-
Cl.4.1.4(Carbon Black Di spersion)	-	-	-
Cl.5(Di men sion)	-	-	-
Cl.5.1.l(Outside Diameter)	-	-	-
Cl.5.1.l(Outside Diameter)	-	-	-
Cl.6.2.L(Wall Thickness)	-	-	-
Cl.6.2.4(Workmanship and Appearance)	-	-	-
Cl.6.2.6(Rubber Ring Hardness)	-	-	-
Cl.6.2.6(Ageing Test)	-	-	-
Cl.7.1.l(Visual Anneara nce)	-	-	-
Cl.7.1.2(Hydraulic Characteristic)	-	-	-
Cl.7.1.2(Hydraulic Characteristic)	-	-	-
Cl.7.1.2(Hydraulic Characteristic)	-	-	-
Cl.7.1.2(Hydraulic Characteristic)	-	-	-
Cl.7.1.3(Reversion Test)	-	-	-
Cl.7.1.3(Reversion Test)	-	-	-
Cl.7.1.4(Tensile Test)	-	-	-
Cl.7.1.4(Tensile Test)	-	-	-
Cl.7.1.4(Tensile Test)	-	-	-
Cl.7.1.4(Elongation)	-	-	-
Cl.7.1.4(Elongation)	-	-	-
Cl.7.1.5(Fusion Compatibility)	-	-	-
Cl.7.1.5(Fusion Compatibility)	-	-	-
Cl.7.1.5(Fusion Compatibility)	-	-	-
Cl.7.1.5(Fusion Compatibility)	-	-	-
Cl.7.1.6(Corrected Density)	-	-	-
Cl.7.1.7(MFR Test)	-	-	-
Cl.7.1.7(MFR Test)	-	-	-
Cl.7.1.7(MFR Test)	-	-	-
Cl.7.1.7(MFR Test)	-	-	-
Cl.7.2.l(Leakage Test)	-	-	-
Cl.7.2.l(Leakage Test)	-	-	-
Cl.7.2.l(Leakage Test)	-	-	-
Cl.7.2.2(Cl.7.2.2)	-	-	-
Cl.7.2.3(Weld ability Test)	-	-	-
Cl.7.2.3(Weld ability Test)	-	-	-
6.2 (iii) Rubber Rings (a) Shore hardness(Shore hardness)	-	-	-
6.2 (iii) Rubber Rings (b) Accelerated Storage test(Accelerated Storage test)	-	-	-
5(Dimensions of pipe (outside diameter, ovality, wall thickness))	-	-	-
6.1(Thermal Stability (OIT))	-	-	-
6.1(Volatile Matter)	-	-	-
6.1(Water content)	-	-	-
6.1(Tensile strength at Yield & Elongation at break)	-	-	-
6.1(Carbon Black Content)	-	-	-
6.1(Carbon Black Dispersion)	-	-	-
6.2.1(Base Density x 2)	-	-	-
6.2.1(Melt Flow Index x 2)	-	-	-
6.2.1(Thermal Stability (OIT) x 2)	-	-	-
6.2.1(Volatile Matter x 2)	-	-	-
6.2.1(Water content x 2)	-	-	-
6.2.1(Carbon Black Content x 2)	-	-	-
6.2.1(Carbon Black Dispersion x 2)	-	-	-
6.2.1(Wall thickness of male & female coupler)	-	-	-
6.2.5(Holding attachment for coupler parts)	-	-	-
6.2.5(Material Composition (Chemical Analysis))	-	-	-
4.2.2(Coating thickness (Hot dip Galvanized or Electroplated or Passivated or Powder Coated))	-	-	-
6.2.6(Ageing Charges for rubber ring)	-	-	-
7.1.1(Visual appearance of pipes)	-	-	-
7.1.2(Hydraulic Characteristics)	-	-	-
7.1.2((a) Acceptance Test (48 hrs) / 80˚ C)	-	-	-
7.1.2((b) Type test ( 165 hrs) / 80˚ C)	-	-	-
7.1.3(Reversion)	-	-	-
7.1.4(Tensile strength & elongation)	-	-	-
7.1.5(Fusion Compatibility test)	-	-	-
7.1.5((a) Acceptance Test (48 hrs) / 80˚ C)	-	-	-
7.1.5((b) Type test ( 165 hrs) / 80˚ C)	-	-	-
7.1.6(Corrected Density)	-	-	-
7.1.6(Base Density)	-	-	-
7.1.6(Carbon black Content)	-	-	-
7.1.7(Melt Flow Rate (MFR))	-	-	-
7.2.1(Leakage test 1hour / 27°C)	-	-	-
7.2.2(Hydraulic Proof test 1hour / 27°C)	-	-	-
7.2.3((b) Type test ( 165 hrs) / 80˚ C)	-	-	-
8(Supply of pipe (Visual))	-	-	-
4.1.1 (Table-1)(Density)	-	-	-
4.1.1 (Table-1)(Melt Flow Index)	-	-	-
4.1.1 (Table-1)(Oxidation Induction Time)	-	-	-
4.1.1 (Table-1)(Volatile Matter)	-	-	-
4.1.1 (Table-1)(Water content)	-	-	-
4.1.1 (Table-1)(Tensile strength at Yield & Elongation at break)	-	-	-
4.1.4(Carbon Black Content)	-	-	-
4.1.4(Carbon Black Dispersion)	-	-	-
4.1.1(Polyethylene material)	-	-	-
4.1.3, Table 1,(i)(Bass density)	-	-	-
4.1.3, Table 1,(ii)(Melt flow rate)	-	-	-
4.1.3, Table 1,(iii)(Thermal stability)	-	-	-
4.1.3, Table 1,(iv)(Volatile matter)	-	-	-
4.1.3, Table 1,(v)(Water content)	-	-	-
4.1.4(The Carbon Content and Dispersion)	-	-	-
4.1.5(Carbon Black Specification)	-	-	-
4.1.6(Antioxidant)	-	-	-
4.1.7(Rework Material)	-	-	-
4.2(Metallic Couplers)	-	-	-
5.1, Table 1,(i)(Plain pipes)	-	-	-
5.1, Table 1,(ii)(90° Bends and tee)	-	-	-
5.1, Table 1,(iii)(Base pipe )	-	-	-
5.1, Table 1,(iv)(PCN)	-	-	-
5.1, Table 1,(v)(Reducers, ferrule reducers)	-	-	-
5.1, Table 1,(vi)(End caps, insert valve coupler, valve openers)	-	-	-
5.1, Table 1,(vii)(Riser pipe and socket)	-	-	-
7.1.1(Visual Appearance and Workmanship)	-	-	-
7.1.2(Hydraulic Performance Characteristic)	-	-	-
7.1.3(Reversion Test)	-	-	-
7.1.4(Tensile Test)	-	-	-
7.1.5(Fusion Compatibility Test)	-	-	-
7.1.6(Corrected Density)	-	-	-
7.1.7(Melt flow rate)	-	-	-
7.2.1(Leakage Test)	-	-	-
7.2.2(Hydraulic Proof Test)	-	-	-
7.2.3(Weldability Test)	-	-	-
10(Marking)	-	-	-
5.1.2(Squareness)	-	-	-
6.1.2.2(Hydraulic Proof Test)	-	-	-
6.3.4()	-	-	-
Cl.7.2.l(Leakage Test)	-	-	-
Cl.4.1.3, T-1(Water Content)	-	-	-
Cl.4.1.3, T-1(Water Content)	-	-	-

24 Apr, 2027

-
Exclusion: Holding attachements for Coupler parts

12196

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 15778 (2007)

Chlorinated polyvinyl chloride (Cpvc) pipes for potable hot and cold water distribution supplies - Specification

15 TO 150 MM

150250.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1 IS 12235 (Part 1) Table 2(Dimension of Pipes: Mean outside Diameter)	-	500.00	-
7.1,7.1.1 IS 12235 (Part 1) Table 2(Outside Diameter at any point)	-	0.00	ALL DIMENSION HAVE SINGLE CHARGE.
7.1.2 IS 12235 (Part 1) Table 2(Wall Thickness )	-	0.00	ALL DIMENSION HAVE SINGLE CHARGE.
7.1.3 (Effective length)	-	0.00	ALL DIMENSION HAVE SINGLE CHARGE.
8(Pipe Ends)	-	500.00	-
9.1(Visual Appearance)	-	500.00	-
9.2 IS 12235 (Part 3)(Opacity)	-	700.00	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (first extraction))	-	3000.00	-
9.4 IS 12235(Part 5/Sec 1 and Sec 2)(Reversion Test : When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.)	-	700.00	-
9.5 IS 12235(Part 2)(Vicat Softening Temperature: When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen shall not be less than 110°C.)	-	1100.00	-
9.6 IS 12235(Part 14)(Density)	-	700.00	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	850.00	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	4800.00	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	11000.00	-
10.2 Table 3 IS 12235 (Part 8/Sec 1)(Thermal Stability by Hydrostatic Pressure Testing)	-	110500.00	Test Charge- 1000.00 SPECIMEN CONDITIOING CHARGE- 109500.00
10.3 IS 4985 Table 4(Resistance to External Blow at O°C: When tested by the method prescribed in IS 4985, with classified striker mass and drop height as given in Table 4, the pipe shall have a true impact rate of not more than 10 percent.)	-	1600.00	Test Charge- 1100.00 SPECIMEN PREPARATION CHARGE-500.00
10.4 IS 12235(Part 19)(Flattening Test)	-	500.00	-
10.5 IS 12235(Part 13)(Tensile Strength : When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C. )	-	1800.00	Test Charge- 1300.00 SPECIMEN PREPARATION CHARGE- 500.00
6.3.2 Annex C(Verification of the Malfunction Temperature, Tmal: )	-	11500.00	Test Charge- 11000.00 SPECIMEN PREPARATION CHARGE- 500.00
6.2.1 Annex B(Chloride Content of Resin)	-	4300.00	Optional Applicable on raw material
6.3(Compound Properties)	-	17475.00	Optional Applicable on raw material - Total Charge 17475
5 Table 1(Classification of pipes)	-	0.00	-
6.3.1 Annex B(Chloride content)	-	0.00	-
6.3.2 IS 13360 (Part 3/See 1)(Density)	-	0.00	-
9(PHYSICAL AND CHEMICAL CHARACTERISTICS)	-	0.00	-
9.1(Visual Appearance)	-	0.00	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (third extraction))	-	0.00	-
Cl. 9.3,IS 4985 Cl. 10.3(Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	0.00	-
Cl. 9.3,IS 4985 Cl. 10.3(Cadmium (for all three extracts) )	-	0.00	-
Cl. 9.3,IS 4985 Cl. 10.3(Mercury (for all three extracts) )	-	0.00	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction) )	-	0.00	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances including di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate')	-	0.00	-
10(Mechanical Properties)	-	0.00	-
5 Table 1(Classification of pipes)	-	0.00	-
6.2.1 Annex B(Chloride Content of Resin)	-	0.00	-
6.3(Compound Properties)	-	0.00	-
6.3.1 Annex B(Chloride content)	-	0.00	-
6.3.2 Annex C(Verification of the Malfunction Temperature, Tmal: )	-	0.00	-
6.3.2 IS 13360 (Part 3/See 1)(Density)	-	0.00	-
7.1 IS 12235 (Part 1) Table 2(Dimension of Pipes: Mean outside Diameter)	-	0.00	-
7.1,7.1.1 IS 12235 (Part 1)Table 2(Outside Diameter at any point (Minimum))	-	0.00	-
7.1.2 IS 12235 (Part 1)Table 2(Wall Thickness (Minimum))	-	0.00	-
7.1.3 (Effective length)	-	0.00	-
8.0(Pipe Ends)	-	0.00	-
9.0(PHYSICAL AND 1CHARACTERISTICS)	-	0.00	-
9.1(Visual Appearance)	-	0.00	-
9.1(Visual Appearance)	-	0.00	-
9.2 IS 12235 (Part 3)(Opacity)	-	0.00	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (first extraction))	-	0.00	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (third extraction))	-	0.00	-
Cl. 9.3,IS 4985 Cl. 10.3(Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	0.00	-
Cl. 9.3,IS 4985 Cl. 10.3(Cadmium (for all three extracts) )	-	0.00	-
Cl. 9.3,IS 4985 Cl. 10.3(Mercury (for all three extracts) )	-	0.00	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction) )	-	0.00	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances including di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate')	-	0.00	-
9.4 IS 12235(Part 5/Sec 1 and Sec 2)(Reversion Test : When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.)	-	0.00	-
9.5 IS 12235(Part 2)(Vicat Softening Temperature: When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen shall not be less than 110°C.)	-	0.00	-
9.6 IS 12235(Part 14)(Density)	-	0.00	-
10.0(Mechanical Properties)	-	0.00	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	0.00	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	0.00	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	0.00	-
10.2 Table 3 IS 12235 (Part 8/Sec 1)(Thermal Stability by Hydrostatic Pressure Testing)	-	0.00	-
10.3 IS 4985 Table 4(Resistance to External Blow at O°C: When tested by the method prescribed in IS 4985, with classified striker mass and drop height as given in Table 4, the pipe shall have a true impact rate of not more than 10 percent.)	-	0.00	-
10.4 IS 12235(Part 19)(Flattening Test)	-	0.00	-
10.5 IS 12235(Part 13)(Tensile Strength : When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C. )	-	0.00	-
7.1.2(Wall Thickness (Maximum))	-	0.00	-
7.1.1(Outside Diameter at any point (Maximum))	-	0.00	-
6.3(K value Test)	-	0.00	-
6.3.3(Density)	-	0.00	-

24 Apr, 2027

-
-

12197

Central Institute of Petrochemicals Engineering & Technology (CIPET), Chandrapur

7173804

IS 14887 (2014)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision)

50Kg

24705 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Material Identification)	-	2000	-
3.1(Overall Migration)	-	2325	Test = Rs. 1700, Specimen Preparation = Rs. 625
3.2(Tapes – Width and Thickness ( IS 6192/IS 11197))	-	250	-
3.2(Tapes – Linear Density (IS 6192/IS 11197))	-	500	-
3.2(Tapes – Tenacity (IS 6192/IS 11197))	-	500	-
3.2(Tapes – Dimensional stability (PP) (IS 11197))	-	1000	-
3.2(Unlaminated Fabric Mass )	-	300	-
3.3.1(Bottom seam (IS 10789))	-	250	-
4.1 and 3.4(Mass of bale (Cl. 4.1), Capacity (Cl 3.4))	-	250	-
4.2 and Table 1 ii(Dimensions )	-	250	-
5.2 and Table 1 iv(Picks per dm )	-	250	-
5.2 and Table 1 iii(Ends per dm )	-	250	-
4.2 and Table 1 vi(Average breaking strength of fabric )	-	1350	Test = Rs. 1100, Specimen Preparation = Rs. 250
4.2 and Table 1 vi(Breaking strength of bottom seam )	-	1350	Test = Rs. 1100, Specimen Preparation = Rs. 250
4.2 and Table 1 viii(Elongation at break of fabric )	-	1350	Test = Rs. 1100, Specimen Preparation = Rs. 250
4.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	11880	Test = Rs. 2 X 1100 = 2200, Conditioning Charges = Rs. 9680
4.2 and Table 1 x(Ash content )	-	950	-
4.2 and Table 1 v(Mass of sack )	-	300	-
3.2(Tapes – Elongation at point of rupture (IS 6192/IS 11197))	-	1100	-
3.2(Tapes – Heat Shrinkage (HDPE) (Cl. 3.2 and IS 6192))	-	1400	Total= Rs. 1400 (For 100°C = Rs. 700 & For 125°C = Rs. 700)
3.2(Tapes – Colour Fastness for pigmented tapes (IS 6192/IS 11197))	-	850	-

10 Sep, 2026

-
-

12198

INDIAN TESTING LABORATORY PRIVATE LIMITED, GREATER NOIDA

8171306

IS 17546 (2021)

Chlorinated polyvinyl chloride CPVC fittings for potable hot and cold water distribution supplies Specification

80000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Composition)	-	12000	-
7(Dimensions of fitting)	-	1000	-
8.1(Visual Appearance)	-	1000	-
8.2(Opacity)	-	1500	-
8.3(Stress Relief Test)	-	2000	-
8.4(Vicat softening Temperature)	-	2000	-
8.5(Density)	-	1500	-
8.6(Effect on water)	-	5000	-
9(Mechanical Properties)	-	70000	-
11(Marking)	-	500	-
6(Composition)	-	0	-
7(Dimensions of fitting)	-	0	-
8.1(Visual Appearance)	-	0	-
8.2(Opacity)	-	0	-
8.3(Stress Relief Test)	-	0	-
8.4(Vicat softening Temperature)	-	0	-
8.5(Density)	-	0	-
8.6(Effect on water)	-	0	-
9(Mechanical Properties)	-	0	-
11(Marking)	-	0	-
6(Composition)	-	0	-
7(Dimensions of fitting)	-	0	-
8.1(Visual Appearance)	-	0	-
8.2(Opacity)	-	0	-
8.3(Stress Relief Test)	-	0	-
8.4(Vicat softening Temperature)	-	0	-
8.5(Density)	-	0	-
8.6(Effect on water)	-	0	-
9(Mechanical Properties)	-	0	-
11(Marking)	-	0	-
6(Composition)	-	0	-
7(Dimensions of fitting)	-	0	-
8.1(Visual Appearance)	-	0	-
8.2(Opacity)	-	0	-
8.3(Stress Relief Test)	-	0	-
8.4(Vicat softening Temperature)	-	0	-
8.5(Density)	-	0	-
8.6(Effect on water)	-	0	-
9(Mechanical Properties)	-	0	-
11(Marking)	-	0	-
6(Composition)	-	0	-
7(Dimensions of fitting)	-	0	-
8.1(Visual Appearance)	-	0	-
8.2(Opacity)	-	0	-
8.3(Stress Relief Test)	-	0	-
8.4(Vicat softening Temperature)	-	0	-
8.5(Density)	-	0	-
8.6(Effect on water)	-	0	-
9(Mechanical Properties)	-	0	-
11(Marking)	-	0	-

15 Aug, 2028

-
Included w.e.f. 09.12.2022.

12199

Hindustaan Testing Solutions LLP, Ambala

9122136

IS 15658 (2021)

Concrete Paving Blocks - Specification ( First Revision )

All

21700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 3.20(Spacer nibs)	-	0	(19700 without optional test, 21700 with optional test) 20% discount to BIS GSTIN extra as per govt rule
Clause 7.1.1 (General Quality)	-	400	Spacer nibs charges included 20% discount to BIS GSTIN extra as per govt rule
Clauses 7.1.2 & 9.1.2 (Visual Inspection)	-	400	20% discount to BIS GSTIN extra as per govt rule
Clause 7.1.3 (Colour and Texture)	-	0	Charges Included in Visual inspection 20% discount to BIS GSTIN extra as per govt rule
Clause 6.3 (Bonding and Delamination between the layers of paver blocks)	-	0	Charges Included in Visual inspection 20% discount to BIS GSTIN extra as per govt rule
Clause 7.2, Table No. 2, SI No. (ii) (Length, L)	-	0	20% discount to BIS GSTIN extra as per govt rule
Clause 7.2, Table No. 2, SI No. (ii) (Indivdual Length, L)	-	500	20% discount to BIS GSTIN extra as per govt rule
Clause 7.2, Table No. 2, SI No. (i) (Indivdual Width, W)	-	500	20% discount to BIS GSTIN extra as per govt rule
Clause 7.2, Table No. 2, SI No. (i) (Width, W)	-	0	20% discount to BIS GSTIN extra as per govt rule
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Higher)	-	250	20% discount to BIS GSTIN extra as per govt rule
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Higher)	-	0	20% discount to BIS GSTIN extra as per govt rule
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Lower)	-	250	20% discount to BIS GSTIN extra as per govt rule
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Lower)	-	0	20% discount to BIS GSTIN extra as per govt rule
Clause 7.2, Table No. 2, SI No. (iii) (Indivdual Thickness, Th)	-	400	20% discount to BIS GSTIN extra as per govt rule
Clause 7.2, Table No. 2, SI No. (iii) (Thickness, Th)	-	0	20% discount to BIS GSTIN extra as per govt rule
Clause 7.2, Table No. 2, SI No. (iv) (Aspect Ratio, L/Th)	-	0	20% discount to BIS GSTIN extra as per govt rule
Clause 7.2, Table No. 2, SI No. (iv) (Indivdual Aspect Ratio, L/Th)	-	200	20% discount to BIS GSTIN extra as per govt rule
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Width)	-	0	20% discount to BIS GSTIN extra as per govt rule
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Width)	-	500	20% discount to BIS GSTIN extra as per govt rule
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Depth)	-	0	20% discount to BIS GSTIN extra as per govt rule
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Depth)	-	500	20% discount to BIS GSTIN extra as per govt rule
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Thickness of wearing Layer)	-	0	20% discount to BIS GSTIN extra as per govt rule
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Indivdual Thickness of wearing Layer)	-	0	20% discount to BIS GSTIN extra as per govt rule
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Plan Area (Asp))	-	0	20% discount to BIS GSTIN extra as per govt rule
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Indivdual Plan Area (Asp))	-	500	20% discount to BIS GSTIN extra as per govt rule
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Ratio of wearing face area and Plan area (Asw/Asp))	-	0	20% discount to BIS GSTIN extra as per govt rule
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Indivdual Ratio of wearing face area and Plan area (Asw/Asp))	-	400	20% discount to BIS GSTIN extra as per govt rule
Clause 7.2 & 9.1.3, Table 2, SI No. (ix)(Deviation from squareness)	-	500	20% discount to BIS GSTIN extra as per govt rule
Clause 7.3 & 9.1.4, Table 3, SI No. (i) a)( Indivdual Water absorption)	-	2000	20% discount to BIS GSTIN extra as per govt rule
Clause 7.3 & 9.1.4, Table 3, SI No. (i) b)(Water absorption (Average of three test specimens))	-	0	20% discount to BIS GSTIN extra as per govt rule
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) a)(Indivdual Compressive strength (i))	-	3200	20% discount to BIS GSTIN extra as per govt rule
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Compressive strength (Average of eight test specimens))	-	0	20% discount to BIS GSTIN extra as per govt rule
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) i)( Indivdual Dry Abrasion Resistance )	-	2000	20% discount to BIS GSTIN extra as per govt rule
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) ii)(Dry Abrasion resistance (Average of three test specimens))	-	0	20% discount to BIS GSTIN extra as per govt rule
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) i)( Indivdual Wet Abrasion Resistance )	-	2300	20% discount to BIS GSTIN extra as per govt rule
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) ii)(Wet Abrasion resistance (Average of three test specimens))	-	0	20% discount to BIS GSTIN extra as per govt rule
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) a)(Indivdual Tensile splitting strength (i))	-	2400	20% discount to BIS GSTIN extra as per govt rule
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) b)(Average Tensile splitting strength )	-	0	20% discount to BIS GSTIN extra as per govt rule
Clause 7.3, Annex F(Individual Failure Load per unit Length)	-	0	20% discount to BIS GSTIN extra as per govt rule
Clause 7.3, Annex F(Average Failure Load per unit Length)	-	0	20% discount to BIS GSTIN extra as per govt rule
Clause 7.3 & 9.1.4, Table 3, SI No. (v) a)(Indivdual Flexural strength (i))	-	2400	20% discount to BIS GSTIN extra as per govt rule
Clause 7.3 & 9.1.4, Table 3, SI No. (v) b)(Average Flexural strength )	-	0	20% discount to BIS GSTIN extra as per govt rule
Clause 7.3, Annex G(Individual Breaking Load)	-	0	20% discount to BIS GSTIN extra as per govt rule
Clause 7.3, Annex G(Average Breaking Load)	-	0	20% discount to BIS GSTIN extra as per govt rule
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 10 cycles)	-	500	20% discount to BIS GSTIN extra as per govt rule
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 25 cycles)	-	500	20% discount to BIS GSTIN extra as per govt rule
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 50 cycles)	-	500	20% discount to BIS GSTIN extra as per govt rule
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Cumulative Weight losses of specimen after 10, 25 & 50 cycles)	-	500	20% discount to BIS GSTIN extra as per govt rule
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 10 cycles)	-	0	20% discount to BIS GSTIN extra as per govt rule
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 25 cycles)	-	0	20% discount to BIS GSTIN extra as per govt rule
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 50 cycles)	-	0	20% discount to BIS GSTIN extra as per govt rule

12 Sep, 2028

-
Amendment No. 1 included w.e.f. 10-04-2023

12200

Hindustaan Testing Solutions LLP, Ambala

9122136

IS 12406 (2021)

Medium density fibre boards for general purpose - Specification

Grade 1 & Grade 2

13800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clauses 5.2, 9 and 10.2.2(Density)	-	600	(For Exterior Grade, Grade-1-13800 & Interior Grade, Grade-2-10800) 20% discount to BIS GSTIN extra applicable as per govt. rule
Clauses 5.2, 9 and 10.2.2(Variation from mean density)	-	0	20% discount to BIS GSTIN extra applicable as per govt. rule
Clauses 5.2, 9 and 10.2.2(Moisture Content)	-	600	20% discount to BIS GSTIN extra applicable as per govt. rule
Clauses 5.2, 9 and 10.2.2(Variation from mean moisture content)	-	0	20% discount to BIS GSTIN extra applicable as per govt. rule
Clauses 5.2, 9 and 10.2.2(Linear expansion (Thickness Swelling in Water) Due to general Absorption after 24h soaking)	-	3000	20% discount to BIS GSTIN extra applicable as per govt. rule
Clauses 5.2, 9 and 10.2.2(Internal Bond Strength)	-	1000	20% discount to BIS GSTIN extra applicable as per govt. rule
Clauses 5.2, 9 and 10.2.2(Internal Bond strength (i) (After Cyclic test) (ii) (After accelerated water resistance test))	-	3000	20% discount to BIS GSTIN extra applicable as per govt. rule
Clauses 5.2, 9 and 10.2.2(Modulus of Rupture a) Avg. Value b) Min. Individual)	-	500	20% discount to BIS GSTIN extra applicable as per govt. rule
Clauses 5.2, 9 and 10.2.2(Modulus of Elasticity a) Avg. Value b) Min. Individual)	-	500	20% discount to BIS GSTIN extra applicable as per govt. rule
Clauses 5.2, 9 and 10.2.2(Screw withdrawl strength (i) Face (ii) Edge (For thickness >12mm))	-	2000	20% discount to BIS GSTIN extra applicable as per govt. rule
Clauses 5.2, 9 and 10.2.2(Formaldehyde Content (i) For Formaldehyde Class, E1 (ii) For Formaldehyde Class, E2)	-	2000	20% discount to BIS GSTIN extra applicable as per govt. rule
8(DIMENSIONS AND TOLERANCES)	-	600	20% discount to BIS GSTIN extra applicable as per govt. rule

12 Sep, 2028

-
Excluding Table-3 (xii) Steady-State Formaldehyde Emission

12201

Hindustaan Testing Solutions LLP, Ambala

9122136

IS 10701 (2012)

Structural plywood - Specification (First Revision)

17650 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 11.2(Moisture content)	-	400	20% discount for BIS GSTIN extra as per govt rule
11.3(Glue Shear strength in dry state)	-	1000	20% discount for BIS GSTIN extra as per govt rule
11.4.1(Resistance to Water)	-	2500	20% discount for BIS GSTIN extra as per govt rule
11.5(Resistance to Micro-organisms)	-	2800	20% discount for BIS GSTIN extra as per govt rule
11.6(Tensile Strength)	-	1000	20% discount for BIS GSTIN extra as per govt rule
11.7.1(Compressive Strength, Bending Strength, Panel Shear Strength, Plate Shear Strength and Rolling Shear Strngth)	-	6150	20% discount for BIS GSTIN extra as per govt rule
11.8(Wet Bending Strength)	-	2000	20% discount for BIS (Retention of preservative-1000)

12 Sep, 2028

-
-

12202

Hindustaan Testing Solutions LLP, Ambala

9122136

IS 12894 (2002)

Pulverized fuel ash - Lime bricks - Specification

All

7250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General Requirements)	-	100	20% discount for BIS GSTIN extra as per govt rule
3.2(General Requirements)	-	200	20% discount for BIS GSTIN extra as per govt rule
3.3(General Requirements)	-	0	20% discount for BIS GSTIN extra as per govt rule
3.4(General Requirements)	-	100	20% discount for BIS GSTIN extra as per govt rule
3.5(General Requirements)	-	100	20% discount for BIS GSTIN extra as per govt rule
5.1(Dimensions)	-	1000	20% discount for BIS GSTIN extra as per govt rule
7.1, Table -1(Average Wet Compressive Strength)	-	1500	20% discount for BIS GSTIN extra as per govt rule
7.2(Drying Shrinkage)	-	1500	20% discount for BIS GSTIN extra as per govt rule
7.3(Efflorescence Test)	-	2000	20% discount for BIS GSTIN extra as per govt rule
7.4(Water Absorption)	-	750	20% discount for BIS GSTIN extra as per govt rule

12 Sep, 2028

-
-

12203

Hindustaan Testing Solutions LLP, Ambala

9122136

IS 13757 (1993)

Burnt Clay Fly Ash Building Bricks-specification

All

5750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(GENERAL QUALITY)	-	500	20% discount for BIS GSTIN extra as per govt rule
6.1(Dimensions)	-	1000	20% discount for BIS GSTIN extra as per govt rule
6.2(Tolerances)	-	0	20% discount for BIS GSTIN extra as per govt rule
7.1(Compressive Strength)	-	1500	20% discount for BIS GSTIN extra as per govt rule
7.2(Water Absorption)	-	750	20% discount for BIS GSTIN extra as per govt rule
7.3(Efforescence)	-	2000	20% discount for BIS GSTIN extra as per govt rule

12 Sep, 2028

-
-

12204

Hindustaan Testing Solutions LLP, Ambala

9122136

IS 16720 (2018)

Pulverized Fuel Ash-Cement Bricks- Specification

All

5750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1 and fig.1A &1B(Dimensions- Length (L) )	-	300	20% discount for BIS GSTIN extra as per govt rule
4.1 and fig.1A &1B(Dimensions- Width (B) )	-	300	20% discount for BIS GSTIN extra as per govt rule
4.1 and fig.1A &1B(Dimensions- Height (H))	-	300	20% discount for BIS GSTIN extra as per govt rule
4.1 & 4.3 and fig.1A &1B(Dimensions - Depth)	-	100	20% discount for BIS GSTIN extra as per govt rule
4.1 and fig.1A &1B(Dimensions)	-	0	20% discount for BIS GSTIN extra as per govt rule
5 and Tanle 1 (CLASSIFICATION)	-	0	20% discount for BIS GSTIN extra as per govt rule
8.1(GENERAL)	-	500	20% discount for BIS GSTIN extra as per govt rule
8.3(Density Annex C of IS 2185 (Part 1))	-	500	20% discount for BIS GSTIN extra as per govt rule
8.4 and Table 1(Compressive Strength - Individual IS 3495 (Part 1))	-	1500	20% discount for BIS GSTIN extra as per govt rule
8.5(Drying Shrinkage IS 4139)	-	1500	20% discount for BIS GSTIN extra as per govt rule
8.6(Water Absorption IS 3495 (Part 2))	-	750	20% discount for BIS GSTIN extra as per govt rule

12 Sep, 2028

-
-

12205

Hindustaan Testing Solutions LLP, Ambala

9122136

IS 1237 (2012)

Cement Concrete Flooring Tiles - Specification

7350 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7.1(Length, Breadth, Minimum thickness, Difference in length of side between the longest side and shorterst side, Half tiles, Difference in Thickness between the thickest and thinnest tile, Thickness of wearing layer)	-	600	20% discount for BIS GSTIN extra as per govt rule
Cl 11(Suface Finish)	-	500	20% discount for BIS GSTIN extra as per govt rule
Cl 12.2(Concavity & Convexity )	-	750	20% discount for BIS GSTIN extra as per govt rule
Cl 12.3(The Maximum gap between the arms of the square and the edge of the title shall notexceed 2 percent of the length.)	-	750	20% discount for BIS GSTIN extra as per govt rule
Cl 12.4(Shall not exceed 1 percent of the length of the edge.)	-	750	20% discount for BIS GSTIN extra as per govt rule
Cl 12.5(Water absorption)	-	1000	20% discount for BIS GSTIN extra as per govt rule
Cl 12.6(Wet transverse strength )	-	1000	20% discount for BIS GSTIN extra as per govt rule
Cl 12.7(Resistance to wear)	-	2000	20% discount for BIS GSTIN extra as per govt rule

12 Sep, 2028

-
-

12206

Hindustaan Testing Solutions LLP, Ambala

9122136

IS 15558 (2005)

Mini domestic water heater for use with LPG - Specification

All

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(Construction)	-	50	20% discount for BIS GSTIN extra as per Govt rule
4.1.2(Construction)	-	50	20% discount for BIS GSTIN extra as per Govt rule
4.1.3(Construction)	-	50	20% discount for BIS GSTIN extra as per Govt rule
4.1.4(Construction)	-	50	20% discount for BIS GSTIN extra as per Govt rule
4.1.5(Construction)	-	50	20% discount for BIS GSTIN extra as per Govt rule
4.1.6(Construction)	-	50	20% discount for BIS GSTIN extra as per Govt rule
4.1.7(Construction)	-	50	20% discount for BIS GSTIN extra as per Govt rule
4.1.8(Construction)	-	50	20% discount for BIS GSTIN extra as per Govt rule
4.1.9(Construction)	-	50	20% discount for BIS GSTIN extra as per Govt rule
4.1.10(Construction)	-	50	20% discount for BIS GSTIN extra as per Govt rule
4.1.11(Construction)	-	50	20% discount for BIS GSTIN extra as per Govt rule
4.1.12(Construction)	-	50	20% discount for BIS GSTIN extra as per Govt rule
5.1(Materials)	-	0	20% discount for BIS GSTIN extra as per Govt rule
5.2(Materials)	-	200	20% discount for BIS GSTIN extra as per Govt rule
5.3(Materials)	-	100	20% discount for BIS GSTIN extra as per Govt rule
5.4(Materials)	-	200	20% discount for BIS GSTIN extra as per Govt rule
5.5(Materials)	-	0	20% discount for BIS GSTIN extra as per Govt rule
6.1(Connections)	-	100	20% discount for BIS GSTIN extra as per Govt rule
6.2(Connections)	-	200	20% discount for BIS GSTIN extra as per Govt rule
6.3(Connections)	-	100	20% discount for BIS GSTIN extra as per Govt rule
6.4(Connections)	-	200	20% discount for BIS GSTIN extra as per Govt rule
6.5(Connections)	-	200	20% discount for BIS GSTIN extra as per Govt rule
6.6(Gas Inlet Connections)	-	200	20% discount for BIS GSTIN extra as per Govt rule
7(Flame Visibility)	-	100	20% discount for BIS GSTIN extra as per Govt rule
8(Gas Taps)	-	200	20% discount for BIS GSTIN extra as per Govt rule
9(Flame Failure Device)	-	200	20% discount for BIS GSTIN extra as per Govt rule
10(Ignition Device)	-	100	20% discount for BIS GSTIN extra as per Govt rule
11(Protection Against Accidental Overheating)	-	500	20% discount for BIS GSTIN extra as per Govt rule
12(Water Rate Adjuster)	-	500	20% discount for BIS GSTIN extra as per Govt rule
14(Gas Soundness)	-	200	20% discount for BIS GSTIN extra as per Govt rule
15(Water Soundness)	-	300	20% discount for BIS GSTIN extra as per Govt rule
16(Thermal Efficiency)	-	1500	20% discount for BIS GSTIN extra as per Govt rule
17(Combustion)	-	500	20% discount for BIS GSTIN extra as per Govt rule
18(Gas Consumption)	-	2000	20% discount for BIS GSTIN extra as per Govt rule
19.1(Ignition and flame travel)	-	100	20% discount for BIS GSTIN extra as per Govt rule
19.2(Ignition and flame travel)	-	150	20% discount for BIS GSTIN extra as per Govt rule
19.3(Ignition and flame travel)	-	150	20% discount for BIS GSTIN extra as per Govt rule
20(Flame Stability)	-	200	20% discount for BIS GSTIN extra as per Govt rule
21(Noise Control)	-	200	20% discount for BIS GSTIN extra as per Govt rule
22(Flash Back)	-	300	20% discount for BIS GSTIN extra as per Govt rule
23(Resistance to Draught)	-	300	20% discount for BIS GSTIN extra as per Govt rule
24(Fire Hazard And Limiting Temperature )	-	400	20% discount for BIS GSTIN extra as per Govt rule
25(Time For Temperature Rise)	-	500	20% discount for BIS GSTIN extra as per Govt rule
26(Hot Water Output Test)	-	500	20% discount for BIS GSTIN extra as per Govt rule
27(Marking)	-	0	20% discount for BIS GSTIN extra as per Govt rule

12 Sep, 2028

-
-

12207

Hindustaan Testing Solutions LLP, Ambala

9122136

IS 4246 (2002)

Domestic gas stoves for use with liquefied petroleum gases - Specification (Fifth Revision)

All

21450 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
24 (Annex - E)(Combustion (CO and CO2 ratio))	-	900		20% discount for BIS GSTIN extra as per Govt rule

12 Sep, 2028

-
-

12208

Hindustaan Testing Solutions LLP, Ambala

9122136

IS 15658 (2006)

Precast concrete blocks for paving - Specification

19700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.2(Physical requirement)	-	100	20% discount for BIS
6.1.3(Physical requirement)	-	100	20% discount for BIS
6.1.4(Physical requirement)	-	100	20% discount for BIS
6.2.1 & 7.1(VISUAL INSPECTION)	-	100	20% discount for BIS
B-1.3.1(MEAN INDIVIDUAL WIDTH (of all eight test specimens), W)	-	400	20% discount for BIS
B-5(AVERAGE WIDTH (Average for eight test specimens), W)	-	100	20% discount for BIS
B-1.3.1(MEAN INDIVIDUAL WIDTH (of all eight test specimens), W)	-	400	20% discount for BIS
B-5(AVERAGE WIDTH (Average for eight test specimens), W)	-	100	20% discount for BIS
B-1.3.1(MEAN INDIVIDUAL LENGTH (of all eight test specimens), L)	-	400	20% discount for BIS
B-5(AVERAGE LENGTH (Average for eight test specimens), L)	-	100	20% discount for BIS
Table 1(MINIMUM PAVER BLOCK THICKNESS)	-	200	20% discount for BIS
B-1.3.2(MEAN INDIVIDUAL THICKNESS (of all eight test specimens), T)	-	200	20% discount for BIS
B-5(AVERAGE THICKNESS (Average for eight test specimens), T)	-	100	20% discount for BIS
B-1.3.3(INDIVIDUAL ASPECT RATIO (L/T) (of all eight test specimens))	-	400	20% discount for BIS
B-5(AVERAGE ASPECT RATIO (L/T) (for eight test specimens))	-	100	20% discount for BIS
B-2.3(INDIVIDUAL ARRIS/CHAMFER (of all eight test specimens))	-	500	20% discount for BIS
B-5(AVERAGE ARRIS/CHAMFER (for eight test specimens))	-	100	20% discount for BIS
B-2.3(INDIVIDUAL ARRIS/CHAMFER (of all eight test specimens))	-	500	20% discount for BIS
B-5(AVERAGE ARRIS/CHAMFER (for eight test specimens))	-	100	20% discount for BIS
B-5(INDIVIDUAL PLAN AREA, ASP (of all eight test specimens) )	-	600	20% discount for BIS
B-5(AVERAGE PLAN AREA, ASP (for eight test specimens))	-	100	20% discount for BIS
B-5(INDIVIDUAL WEARING FACE AREA, Asw (of all eight test specimens))	-	600	20% discount for BIS
B-5(AVERAGE WEARING FACE AREA, Asw (for eight test specimens))	-	100	20% discount for BIS
B- 4.3(MEAN INDIVIDUAL SQUARENESS (of all eight test specimens) )	-	600	20% discount for BIS
B-5(AVERAGE SQUARENESS (for eight test specimens))	-	100	20% discount for BIS
6.2.3(THICKNESS OF WEARING LAYER, if the sample is Double Layered (for eight test specimens))	-	0	20% discount for BIS
6.2.4(WATER ABSORPTION TEST (Average for three test specimens))	-	1400	20% discount for BIS
6.2.4(WATER ABSORPTION TEST (Average for three test specimens))	-	100	20% discount for BIS
6.2.5(AVERAGE COMPRESSIVE STRENGTH (Average for eight test specimens) )	-	100	20% discount for BIS
6.2.5(AVERAGE COMPRESSIVE STRENGTH (Average for eight test specimens))	-	100	20% discount for BIS
6.2.5.1(INDIVIDUAL COMPRESSIVE STRENGTH (Individual strength of eight test specimen))	-	3000	20% discount for BIS
6.2.6(ABRASION RESISTANCE, Dry Condition (For all eight test specimens))	-	1800	20% discount for BIS
6.2.6(ABRASION RESISTANCE, Dry Condition (For all eight test specimens))	-	200	20% discount for BIS
6.2.6(ABRASION RESISTANCE, Wet Condition (For all eight test specimens))	-	1800	20% discount for BIS
6.2.6(ABRASION RESISTANCE, Wet Condition (For all eight test specimens))	-	200	20% discount for BIS
6.2.7(INDIVIDUAL TENSILE SPLITTING STRENGTH (Individual strength of eight test specimen ))	-	2000	20% discount for BIS
6.2.7(AVERAGE TENSILE SPLITTING STRENGTH (for eight test specimen ))	-	200	20% discount for BIS
Annex G-7(INDIVIDUAL FAILURE LOAD/UNIT LENGTH (Individual Failure Load of eight test specimen ))	-	200	20% discount for BIS
6.2.8(INDIVIDUAL FLEXURAL STRENGTH (Individual strength of eight test specimen ))	-	2000	20% discount for BIS
6.2.8(AVERAGE FLEXURAL STRENGTH (Average strength of eight test specimen ))	-	100	20% discount for BIS
Annex-G-7(INDIVIDUAL BREAKING LOAD (Individual Load of eight test specimen ))	-	200	20% discount for BIS
Annex-G-7(AVERAGE BREAKING LOAD)	-	100	20% discount for BIS GSTIN extra as per govt rule

12 Sep, 2028

-
Amendment 3 & 4 included w.e.f. 21-07-2020.

12209

Hindustaan Testing Solutions LLP, Ambala

9122136

IS 5509 (2021)

Fire Retardant Plywood - Specification ( Third Revision )

10100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8.3 (Table 1)(b) 6 mm and above)	-	400		20% discount for BIS

12 Sep, 2028

-
-

12210

Hindustaan Testing Solutions LLP, Ambala

9122136

IS 456 (2000)

Plain and reinforced concrete - Code of practice (Fourth Revision)

Water for Costruction Purpose

6000 View breakup
Rs.4000/- for water for construction purpose Rs. 2000/- for concrete cube testing

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4-(a)-IS: 3025 (P-22)(Volume of 0.02 N NaOH to neutralized 100 ml of water using phenolphthalein indicator)	-	500	20% discount to BIS GSTIN extra as per govt rule
Cl 5.4 (b)(Alkalinity)	-	500	20% discount to BIS GSTIN extra as per govt rule
Cl 5.4 (a)(Acidity)	-	500	20% discount to BIS GSTIN extra as per govt rule
Cl 5.4 Table 1 (i)(Organic Solids)	-	500	20% discount to BIS GSTIN extra as per govt rule
Cl 5.4 Table 1 (ii)(Inorganic Solids)	-	500	20% discount to BIS GSTIN extra as per govt rule
Cl 5.4 Table 1 (iii)(Sulphate)	-	500	20% discount to BIS GSTIN extra as per govt rule
Cl 5.4 Table 1 (iv)(Chloride)	-	500	20% discount to BIS GSTIN extra as per govt rule
Cl 5.4 Table 1 (v)(Suspended Matter)	-	500	20% discount to BIS GSTIN extra as per govt rule
Cl 5.4 .2(pH)	-	500	20% discount to BIS GSTIN extra as per govt rule
16.1(Average Compressive Strength)	-	200	20% discount to BIS GSTIN extra as per govt rule
16.1(Compressive Strength of Individual Samples )	-	600	20% discount to BIS GSTIN extra as per govt rule
16.1(Compressive Strength of Individual Samples )	-	600	20% discount to BIS GSTIN extra as per govt rule
16.1(Compressive Strength of Individual Samples )	-	600	(Construction Water-4000 & Compressive Strength-2000) 20% discount to BIS GSTIN extra as per govt rule

12 Sep, 2028

-
Only for water for construction purpose as per cl.5.4

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number