BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15612 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

12241

PIONEER TESTING LABORATORY PRIVATE LIMITED

8176806

IS 7834 : Part 7 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 7 Specific requirements for unions

All type

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
table 1 sl.no: 01(16 )	-	1000	-
table 1 sl.no: 02(20 )	-	1000	-
table 1 sl.no: 03(25 )	-	1000	-
table 1 sl.no: 04(32 )	-	1000	-
table 1 sl.no: 05(40 )	-	1000	-
table 1 sl.no: 06(50 )	-	1000	-
table 1 sl.no: 07(63 )	-	1000	-
2.1(General)	-	1000	-
2.2.2, Table 1(Size)	-	1000	-
2.2.2, Table 1(Union Laying Length)	-	1000	-
2.2.3( inside diameter of the socket)	-	1000	-
2.2.3(Socket length)	-	1000	-
6.1.1(VCM Content Test)	-	10000	-
2.2.2 table 1(Laying length)	-	1000	-

10 Mar, 2030

-
-

12242

PIONEER TESTING LABORATORY PRIVATE LIMITED

8176806

IS 7834 : Part 6 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 6 Specific requirements for sockets

All Type

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
table 1 sl.no: 01(16 )	-	1000	-
table 1 sl.no: 02(20 )	-	1000	-
table 1 sl.no: 03(25 )	-	1000	-
table 1 sl.no: 04(32 )	-	1000	-
table 1 sl.no: 05(40 )	-	1000	-
table 1 sl.no: 07(63 )	-	1000	-
table 1 sl.no: 08(75 )	-	1000	-
table 1 sl.no: 09(90 )	-	1000	-
table 1 sl.no: 10(110 )	-	1000	-
table 1 sl.no: 11(125 )	-	1000	-
table 1 sl.no: 12(140 )	-	1000	-
table 1 sl.no: 13(160 )	-	1000	-
table 1 sl.no: 14( 180 )	-	1000	-
table 1 sl.no: 15(200 )	-	1000	-
table 1 sl.no: 16(225 )	-	1000	-
table 1 sl.no: 17(250.0)	-	1000	-
table 1 sl.no: 18(280.0)	-	1000	-
table 1 sl.no: 19(315.0)	-	1000	-
2.1(General)	-	1000	-
2.2.2, Table 1(Size)	-	1000	-
2.2.2, Table 1(Socket Laying Length)	-	1000	-
2.2.3( inside diameter of the socket)	-	1000	-
2.2.3(Socket length)	-	1000	-
6.1.1(VCM Content Test)	-	10000	-
2.2.2 table 1(Laying length)	-	1000	-

10 Mar, 2030

-
-

12243

PIONEER TESTING LABORATORY PRIVATE LIMITED

8176806

IS 7834 : Part 5 (1987)

Injection Moulded PVC Socket Fittings With Solvent Cement Joints for Water Supplies - Part 5 : Specific Requirements for 45 degree Tees

All Type

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
table 1 sl.no: 01(16 (Z) )	-	1000	-
table 1 sl.no: 02(20 (Z) )	-	1000	-
table 1 sl.no: 03(25 (Z) )	-	1000	-
table 1 sl.no: 04(32 (Z) )	-	1000	-
table 1 sl.no: 05(40 (Z) )	-	1000	-
table 1 sl.no: 06(50 (Z) )	-	1000	-
table 1 sl.no: 07(63 (Z) )	-	1000	-
table 1 sl.no: 08(75 (Z) )	-	1000	-
table 1 sl.no: 09(90 (Z) )	-	1000	-
table 1 sl.no: 10(110 (Z) )	-	1000	-
table 1 sl.no: 11(125 (Z) )	-	1000	-
table 1 sl.no: 12(140 (Z) )	-	1000	-
table 1 sl.no: 13(160(z))	-	1000	-
table 1 sl.no: 01(16 (Z1) )	-	1000	-
table 1 sl.no: 02(20 (Z1) )	-	1000	-
table 1 sl.no: 03(25 (Z1) )	-	1000	-
table 1 sl.no: 04(32 (Z1) )	-	1000	-
table 1 sl.no: 05(40 (Z1) )	-	1000	-
table 1 sl.no: 06(50 (Z1) )	-	1000	-
table 1 sl.no: 07(63 (Z1) )	-	1000	-
table 1 sl.no: 08(75 (Z1) )	-	1000	-
table 1 sl.no: 09(90 (Z) )	-	1000	-
table 1 sl.no: 10(110 (Z1) )	-	1000	-
table 1 sl.no: 11(125 (Z1) )	-	1000	-
table 1 sl.no: 12(140 (Z1) )	-	1000	-
table 1 sl.no: 13(160(z1))	-	1000	-
2.1(General)	-	1000	-
2.2.2, Table 1(Size)	-	1000	-
2.2.2, Table 1(45 ̊ Tees Laying Length, Z)	-	1000	-
2.2.2, Table 1(45 ̊ Tees Laying Length, Z1)	-	1000	-
2.2.3( inside diameter of the socket)	-	1000	-
2.2.3(Socket length)	-	1000	-
6.1.1(VCM Content Test)	-	10000	-
2.2.2 table 1(Laying length)	-	1000	-

10 Mar, 2030

-
-

12244

PIONEER TESTING LABORATORY PRIVATE LIMITED

8176806

IS 7834 : Part 4 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 4 Specific requirements for 90 degree tees

All Type

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
table 1 sl.no: 01(16 )	-	1000	-
table 1 sl.no: 02(20 )	-	1000	-
table 1 sl.no: 03(25 )	-	1000	-
table 1 sl.no: 04(32 )	-	1000	-
table 1 sl.no: 05(40 )	-	1000	-
table 1 sl.no: 06(50 )	-	1000	-
table 1 sl.no: 07(63 )	-	1000	-
table 1 sl.no: 08(75 )	-	1000	-
table 1 sl.no: 09(90 )	-	1000	-
table 1 sl.no: 10(110 )	-	1000	-
table 1 sl.no: 11(125 )	-	1000	-
table 1 sl.no: 12(140 )	-	1000	-
table 1 sl.no: 13(160 )	-	1000	-
table 1 sl.no: 14( 180 )	-	1000	-
table 1 sl.no: 15(200 )	-	1000	-
table 1 sl.no: 16(225 )	-	1000	-
table 1 sl.no: 17(250.0)	-	1000	-
table 1 sl.no: 18(280.0)	-	1000	-
table 1 sl.no: 19(315.0)	-	1000	-
2.1(General)	-	1000	-
2.2.2, Table 1(Size)	-	1000	-
2.2.2, Table 1(90 ̊ Elbow Laying Length)	-	1000	-
2.2.3( inside diameter of the socket)	-	1000	-
2.2.3(Socket length)	-	1000	-
6.1.1(VCM Content Test)	-	10000	-
2.2.2 table 1(Laying length)	-	1000	-

10 Mar, 2030

-
-

12245

PIONEER TESTING LABORATORY PRIVATE LIMITED

8176806

IS 7834 : Part 3 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 3 Specific requirements for 90 degree elbows

All Type

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
cl 2.2.2(Dimensions)	-	1000	-
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Lead (first extraction) - Appendix C )	-	1500	-
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Lead (third extraction) - Appendix C)	-	1500	-
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Dialkyl tin C4 and higher homologues measured as tin (third extraction) - Appendix C)	-	1500	-
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Other toxic substances (third extraction) - Appendix C)	-	1500	-
6.1.1(VCM Content Test)	-	10000	-

10 Mar, 2030

-
-

12246

PIONEER TESTING LABORATORY PRIVATE LIMITED

8176806

IS 7834 : Part 2 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 2 Specific requirements for 45 degrees elbows

All type

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
table 1 sl.no: 01(16 )	-	1000	-
table 1 sl.no: 02(20 )	-	1000	-
table 1 sl.no: 03(25 )	-	1000	-
table 1 sl.no: 04(32 )	-	1000	-
table 1 sl.no: 05(40 )	-	1000	-
table 1 sl.no: 06(50 )	-	1000	-
table 1 sl.no: 07(63 )	-	1000	-
table 1 sl.no: 08(75 )	-	1000	-
table 1 sl.no: 09(90 )	-	1000	-
table 1 sl.no: 10(110 )	-	1000	-
table 1 sl.no: 11(125 )	-	1000	-
table 1 sl.no: 12(140 )	-	1000	-
table 1 sl.no: 13(160 )	-	1000	-
table 1 sl.no: 14( 180 )	-	1000	-
table 1 sl.no: 15(200 )	-	1000	-
table 1 sl.no: 16(225 )	-	1000	-
table 1 sl.no: 17(250.0)	-	1000	-
table 1 sl.no: 18(280.0)	-	1000	-
table 1 sl.no: 19(315.0)	-	1000	-
2.1(General)	-	1000	-
2.2.2, Table 1(Size)	-	1000	-
2.2.2, Table 1(45 ̊ Elbow Laying Length)	-	1000	-
2.2.3(socket length)	-	1000	-
2.2.2, Table 1(45 ̊ Elbow Laying Length)	-	1000	-
2.2.3( inside diameter of the socket)	-	1000	-
2.2.3(socket length)	-	1000	-
6.4 PART-1(Short term hydraulic test)	-	4500	-
6.1.1(VCM Content Test)	-	10000	-
2.2.2 table 1(Laying Length)	-	1000	-

10 Mar, 2030

-
-

12247

PIONEER TESTING LABORATORY PRIVATE LIMITED

8176806

IS 7834 : Part 1 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 1 General requirements

All Type

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4(Minimum Thickness)	-	300	-
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Minimum Socket Length)	-	300	-
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Mean Socket Internal Diameter at Mid-Point of Socket Length)	-	300	-
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Out-of-roundness tolerances of socket inside diameter)	-	300	-
Cl. 6.1(Stress Relief Test- Appendix A)	-	1500	-
Cl. 6.2(Opacity- Appendix B)	-	1500	-
Cl. 6.3(Effect on Water[(Lead ( first extraction )]- Appendix C)	-	1500	-
Cl. 6.3(Effect on Water[(Lead ( third extraction )]- Appendix C)	-	1500	-
Cl. 6.3(Effect on Water [Dialkyl tin C4, and higher homologues, measured as tin ( third extraction )]- Appendix C)	-	1500	-
Cl. 6.3(Effect on Water [Other toxic substances ( third extraction )]- Appendix C)	-	1500	-
Cl. 6.4(Short-Term Hydraulic Test- Appendix D)	-	3500	-
6.1.1(VCM Content Test)	-	10000	-
3(Size of Fitting -)	-	1000	-
4(Minimum thickness)	-	300	-
5(Socket dimensions)	-	300	-
6.1(Stress Relief Test)	-	2000	-
6.2(Opacity)	-	1500	-
6.3(Effect on Water)	-	7000	-
6.4(Short-Term Hydraulic Test)	-	3500	-

10 Mar, 2030

-
-

12248

BIS, Eastern Regional Laboratory (ERL)

None

IS 1856 (2021)

Steel wire ropes for haulage purposes - Specification Fourth Revision

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (Rope Size and Tolerances.)	-
5 (Minimum Breaking Force up to 32 mm dia.)	-
6.1 (Core)	-
6.2 (Joints)	-
6.3 (Lay)	-
6.4 (Mass and)	-
7 (Galvanizing)	-

-
Breaking load facility available upto 32 mm dia.

12249

PIONEER TESTING LABORATORY PRIVATE LIMITED

8176806

IS 14333 (2022)

Polyethylene Pipes for Sewerage and Industrial Chemicals and Effluent ï¿½ Specification (First Revision)

All type

19900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.1,T2("Base Density (At 27°C Temp.)-IS 7328:2020 ")	-	750	-
5.2.1,T2(Melt Flow Rate (At 190°C /5kg)-IS 2530:1963)	-	1000	-
5.2.1,T2(Thermal Stability(Oxidation Induction Time)-IS 4984:2016(Annexure-B))	-	1500	-
5.2.1,T2("Volatile Matter- IS 4984:2016 (Annexure-C)")	-	2500	-
5.2.1,T2("Water Content-IS 4984:2016 (Annexure-D)")	-	2000	-
5.2.1.1, T2(Compound Density-IS 7328:2020)	-	750	-
5.2.1.1, T2("Compound carbon black -IS 2530:1963 content")	-	1000	-
5.2.1.1, T2(Compound Toluene extract - Any Method)	-	2500	-
5.2.1.1, T2(Compound maximum volatile matter -IS 4984:2016 (Annexure-C))	-	2500	-
5.2.1.1, T2(Compound carbon black particle size- Any Method)	-	2000	-
5.2.1.1, T2(Compound ash content - Any Method)	-	1000	-
5.2.1.1, T2("Compound carbon black -IS 2530:1963 dispersion")	-	1000	-
5.3(Density of Higher olefin - IS 7328:2020)	-	1500	-
5.3(Olefin Constituents- 14333-2022)	-	1500	-
5.3(Loading of Carbon Black - IS 2530:1963)	-	1000	-
5.3(Ash content- Any Method)	-	1000	-
5.3(Toluene extract - Any Method)	-	2000	-
5.3("Maximum volatile matter -IS 4984:2016 (Annexure-C)")	-	2500	-
5.3(Carbon black particle size - Any Method)	-	1000	-
5.4(Antioxidant - Any Method)	-	5000	-
6.2(Colour- IS 14333-2022)	-	200	-
7.1(Visual Appearance- IS 14333-2022)	-	200	-
7.2(Length- IS 14333-2022)	-	350	-
7.4,T3 of IS 4984(Outside Diameter-IS 4984-2016)	-	200	-
7.4,T4 of IS 4984(wall Thickness-IS 4984-2016)	-	200	-
7.4,T3 of IS 4984(Ovality-IS 4984-2016)	-	200	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 27 oC , Test Period - 100 hrs.-IS 4984-2016 (Annexure-E))	-	4200	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 48 hrs.-IS 4984-2016 (Annexure-E))	-	3400	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 165 hrs.-IS 4984-2016 (Annexure-E))	-	7000	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 1000 hrs.-IS 4984-2016 (Annexure-E))	-	12500	-
8.1.2, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 48 hrs.-IS 4984-2016 (Annexure-E))	-	4000	-
8.2("Longitudinal Reversion Test - IS 4984-2016 (Annexure-F)")	-	1500	-
8.3(Carbon black content- IS 2530-1963)	-	1000	-
8.3(Carbon black content Dispersion- IS 2530-1963)	-	1000	-
8.4(Melt Flow rate(Temperature - 190oC,Mass 5kg)-IS 2530-1963)	-	1000	-
8.5(Oxidation Induction Time -IS 4984:2016(Annexure-B))	-	1500	-
8.6(Density-IS 7328:2020)	-	750	-
8.7("Tensile Strength for Butt Fusion - IS 4984-2016 (Annexure-G)")	-	1000	-
8.8,T5("Tensile - IS 4984-2016 (Annexure-H)")	-	1000	-
8.8,T5("Elongation -IS 4984-2016 (Annexure-H)")	-	1000	-
8.9(Slow Crack Growth Rate{Internal Pressure creep Rupture test, Temperature - 80±1 oC , Test Pressure – 0.80MPa, Test Period - 500 hrs.-IS 4984-2016 (Annexure-E &J))	-	4200	-

10 Mar, 2030

-
-

12250

PIONEER TESTING LABORATORY PRIVATE LIMITED

8176806

IS 17425 (2020)

Irrigation Equipment - Quick Coupled Polyethylene Pipes and Fittings for Sprinkler Irrigation Systems - Specification

All Type

44500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Dimensions of pipe - i) Outside diameter)	-	300	-
5(Dimensions of pipe - ii) Wall thickness minimum)	-	300	-
6(Visual Appearance)	-	500	-
7.1(Hydraulic Characteristics - Quality test)	-	7000	-
7.1(Hydraulic Characteristics - Acceptance test)	-	2000	-
7.2(Reversion Test)	-	1500	-
7.3(Tensile Test- i) Tensile Strength)	-	1000	-
7.3(Tensile Test - ii)Elongation at Break)	-	1000	-
7.4(Fusion Compatibility Test- a) Quality test)	-	4500	-
7.4(Fusion Compatibility Test- b) Acceptance test)	-	2000	-
7.5(Density)	-	750	-
7.6(Melt Flow Rate)	-	1500	-
4.2(Carbon black- a)carbon content)	-	1000	-
4.2(Carbon black- b) Dispersion of carbon black)	-	1000	-
7.6(Melt now Rate (MFR))	-	1500	-
7.4 Table-2(Fusion Compatibility Test)	-	1500	-
7.3(Tensile Test)	-	1000	-
7.2(Reversion Test)	-	1500	-
7.1 Table -2(Hydraulic Characteristics)	-	2500	-
6.1(VISUAL APPEARANCE)	-	500	-
5.1.2(Ovality)	-	300	-
5.1 table -1(DIMENSIONS OF PIPES)	-	300	-
4.3(Anti-oxidant)	-	4500	-
Cl. 4.2 , IS 2530-1963, Cl. 10(Cabon Black Content)	-	1000	-
4.1.2(The MFR of the material shall be between 0.2 to 1.1 (both inclusive) when tested at 190 T at a nominal load of 50 N by the method prescribed in 7 of IS 2530. The MFR of the material shall also be within 20% of the value declared by the manufacturer.’)	-	1500	-
4.1.1(density shall be between 940.4 kg/m’ and 958.4 kg/m3 (both inclusive) when determined at 27°C according to procedure prescribed in Annex A of IS 7328. The value of the density shall also not differ from the nominal value by more than 3 kg/m2 as per 5.2.1.1 of IS 7328.)	-	750	-
4.1(melt flow rating (MFR) shall not exceed 1.10 g/10 min.)	-	1500	-
4.1(Quick Coupled Male and Female Couplers)	-	1000	-
4.1.3(Workmanship and appearance)	-	500	-
4.1.4(Holding attachments for coupler parts)	-	500	-
6.1.3(Weldability Test- a) Quality test)	-	1500	-
6.1.3(Weldability Test- b) Acceptance test)	-	1500	-
3(Quick Coupled pipes)	-	1500	-
4.1 (a)(Quick Coupled Male and Female Couplers)	-	1000	-
4.2.7(1 Dimensions of Quick Coupled Pipes and Fittings)	-	500	-
4.2.7(Reducers Table 1 and 2 of IS 8008 (Part 4))	-	500	-
4.2.7(Ferrule reducers Table 1 of IS 8008 (Part 5))	-	500	-
4.2.7(Pipe ends Table 1 of IS 8008 (Part 6))	-	500	-
4.2.7(End caps Table 1 of IS 8008 (Part 9))	-	500	-
4.2.7(Insert vatve couplers Table 1 of IS 8008 (Part 3))	-	500	-
4.2.7(Valve openers Table 1 of IS 8008 (Part 2))	-	500	-
5.2(Dimensions of Quick Coupled Sprinkler Saddles Table 1.)	-	500	-
6.1.1, 6.1.1.1(Leakage Test)	-	1500	-
6.1.2, 6.1.2.1(Hydraulic Proof Test)	-	1500	-
6.1.2.2(Hydraulic Proof Test)	-	1500	-
6.1.3, 6.1.3.1(Weldability Test)	-	1500	-
6.1.3.1.1(Weldability Test)	-	1500	-
6.1.3.2(Quick coupled fittings)	-	500	-
7.2.1(Visual and Workmanship Requirement)	-	500	-
6.2 b(Material Identification - Male & Female Coupler)	-	2000	-
6.3.3(Material Identification - Insert Valve Coupler)	-	2000	-
6.3.5(Material Identification - Saddle)	-	3500	-
6.3.5(Material Identification - Pipe Ends)	-	3500	-
6.3.6(Quick Coupled Pump Connectors - Visual)	-	500	-
7.2.1(Leakage Test)	-	1500	-
Cl.4.1.3(Den sity Test)	-	750	-
Cl.4.1.3(MFR Test)	-	1500	-
Cl.4.1.3(Thermal Stabi lity)	-	2500	-
Cl.4.1.3, T-1(Volatile Matter)	-	1500	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.4(Carbon Black Content)	-	1000	-
Cl.6.2.4(Workmanship and Appearance)	-	500	-
Cl.6.2.6(Rubber Ring Hardness)	-	750	-
Cl.7.1.l(Visual Anneara nce)	-	500	-
Cl.7.1.2(Hydraulic Characteristic)	-	4500	-
Cl.7.1.3(Reversion Test)	-	1500	-
Cl.7.1.4(Tensile Test)	-	1000	-
Cl.7.1.4(Elongation)	-	1000	-
Cl.7.1.5(Fusion Compatibility)	-	1500	-
Cl.7.1.6(Corrected Density)	-	750	-
Cl.7.1.7(MFR Test)	-	1500	-
Cl.7.2.l(Leakage Test)	-	1500	-
6.2.1(Wall thickness of male & female coupler)	-	300	-
6.2.6(Color)	-	200	-
6.2.6(Rubber Ring Hardness Shore – A (Before Ageing))	-	750	-
7.1.1(Visual Appearance and Workmanship)	-	500	-
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Carbon Content)	-	300	-
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Manganese Content)	-	300	-
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Sulphur Content)	-	300	-
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Phosphorous Content)	-	300	-
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1) Al-Killed(Aluminium Content)	-	300	-
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1) Si-Killed(Silicon Content)	-	300	-
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1) Al-Si-Killed(Silicon Content)	-	300	-
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1) Al-Si-Killed(Aluminium Content)	-	300	-
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 10(Cabon Black Content)	-	300	-
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Aluminium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Copper Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Magnesium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Silicon Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Iron Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Manganese Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Zinc Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Titanium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Chromium Content)	-	300	For BIS samples: 1.5 times of BIS testing charges (10% discount to BIS)
5.1.2(Squareness)	-	300	-
10(Marking)	-	500	-
7.3(Quick Couple Fitting)	-	0	-
7.2.3(Weldability Test)	-	1500	-
7.2.2(Hydraulic Proof Test)	-	2500	-
7.2.1(Leakage Test)	-	1500	-
7.1.7(Melt flow rate)	-	1500	-
7.1.6(Corrected Density)	-	750	-
7.1.5(Fusion Compatibility Test)	-	1000	-
7.1.4(Tensile Test)	-	1500	-
7.1.3(Reversion Test)	-	1500	-
7.1.2(Hydraulic Performance Characteristic)	-	0	-
5.1, Table 1,(vii)(Riser pipe and socket)	-	500	-
5.1, Table 1,(vi)(End caps, insert valve coupler, valve openers)	-	500	-
5.1, Table 1,(v)(Reducers, ferrule reducers)	-	0	-
5.1, Table 1,(iv)(PCN)	-	0	-
5.1, Table 1,(iii)(Base pipe )	-	1000	-
5.1, Table 1,(ii)(90° Bends and tee)	-	1500	-
5.1, Table 1,(i)(Plain pipes)	-	0	-
4.2(Metallic Couplers)	-	0	-
4.1.7(Rework Material)	-	0	-
4.1.6(Antioxidant)	-	5000	-
4.1.5(Carbon Black Specification)	-	1000	-
4.1.4(The Carbon Content and Dispersion)	-	1000	-
4.1.3, Table 1,(vii)(Minimum elongation at break)	-	1000	-
4.1.3, Table 1,(vi)(Minimum tensile strength at yield)	-	1500	-
4.1.3, Table 1,(v)(Water content)	-	1000	-
4.1.3, Table 1,(iv)(Volatile matter)	-	1000	-
4.1.3, Table 1,(iii)(Thermal stability)	-	2500	-
4.1.3, Table 1,(ii)(Melt flow rate)	-	1500	-
4.1.3, Table 1,(i)(Bass density)	-	750	-
4.1.1(Polyethylene material)	-	2000	-
4.1.4(Carbon Black Dispersion)	-	1000	-
4.1.4(Carbon Black Content)	-	1000	-
4.1.1 (Table-1)(Tensile strength at Yield & Elongation at break)	-	2000	-
4.1.1 (Table-1)(Water content)	-	1000	-
4.1.1 (Table-1)(Volatile Matter)	-	1000	-
4.1.1 (Table-1)(Oxidation Induction Time)	-	2500	-
4.1.1 (Table-1)(Melt Flow Index)	-	1000	-
4.1.1 (Table-1)(Density)	-	750	-
8(Supply of pipe (Visual))	-	0	-
7.2.3((b) Type test ( 165 hrs) / 80˚ C)	-	4500	-
7.2.3((a) Acceptance Test (48 hrs) / 80˚ C)	-	1500	-
7.2.2(Hydraulic Proof test 1hour / 27°C)	-	1500	-
7.2.1(Leakage test 1hour / 27°C)	-	2500	-
7.1.7(Melt Flow Rate (MFR))	-	1500	-
7.1.6(Carbon black Content)	-	1000	-
7.1.6(Base Density)	-	750	-
7.1.6(Corrected Density)	-	750	-
7.1.5((b) Type test ( 165 hrs) / 80˚ C)	-	4500	-
7.1.5((a) Acceptance Test (48 hrs) / 80˚ C)	-	1500	-
7.1.5(Fusion Compatibility test)	-	1000	-
7.1.4(Tensile strength & elongation)	-	2500	-
7.1.3(Reversion)	-	1000	-
7.1.2((b) Type test ( 165 hrs) / 80˚ C)	-	4500	-
7.1.2((a) Acceptance Test (48 hrs) / 80˚ C)	-	1500	-
7.1.2(Hydraulic Characteristics)	-	0	-
7.1.1(Visual appearance of pipes)	-	500	-
6.2.6(Ageing Charges for rubber ring)	-	1000	-
6.2.6(Material Identification (Chemical Analysis))	-	1000	-
4.2.2(Coating thickness (Hot dip Galvanized or Electroplated or Passivated or Powder Coated))	-	1000	-
6.2.5(Material Composition (Chemical Analysis))	-	1000	-
6.2.5(Holding attachment for coupler parts)	-	0	-
6.2.4(Workmanship and appearance (Visual))	-	500	-
6.2.1(Carbon Black Dispersion x 2)	-	1000	-
6.2.1(Carbon Black Content x 2)	-	1000	-
6.2.1(Water content x 2)	-	1000	-
6.2.1(Volatile Matter x 2)	-	1000	-
6.2.1(Thermal Stability (OIT) x 2)	-	2500	-
6.2.1(Melt Flow Index x 2)	-	1500	-
6.2.1(Base Density x 2)	-	750	-
6.1(Carbon Black Dispersion)	-	1000	-
6.1(Carbon Black Content)	-	1000	-
6.1(Tensile strength at Yield & Elongation at break)	-	2500	-
6.1(Water content)	-	1000	-
6.1(Volatile Matter)	-	1000	-
6.1(Thermal Stability (OIT))	-	2500	-
5(Dimensions of pipe (outside diameter, ovality, wall thickness))	-	1000	-
6.2 (iii) Rubber Rings (b) Accelerated Storage test(Accelerated Storage test)	-	500	-
6.2 (iii) Rubber Rings (a) Shore hardness(Shore hardness)	-	750	-
Cl.7.2.3(Weld ability Test)	-	1500	-
Cl.7.2.3(Weld ability Test)	-	1500	-
Cl.7.2.2(Cl.7.2.2)	-	0	-
Cl.7.2.l(Leakage Test)	-	1500	-
Cl.7.2.l(Leakage Test)	-	1500	-
Cl.7.2.l(Leakage Test)	-	1500	-
Cl.7.2.l(Leakage Test)	-	1500	-
Cl.7.1.7(MFR Test)	-	1500	-
Cl.7.1.7(MFR Test)	-	1500	-
Cl.7.1.5(Fusion Compatibility)	-	2000	-
Cl.7.1.5(Fusion Compatibility)	-	2000	-
Cl.7.1.5(Fusion Compatibility)	-	2000	-
Cl.7.1.4(Elongation)	-	1000	-
Cl.7.1.4(Tensile Test)	-	1500	-
Cl.7.1.4(Tensile Test)	-	1500	-
Cl.7.1.3(Reversion Test)	-	1000	-
Cl.7.1.7(MFR Test)	-	1500	-
Cl.7.1.2(Hydraulic Characteristic)	-	0	-
Cl.7.1.2(Hydraulic Characteristic)	-	0	-
Cl.7.1.2(Hydraulic Characteristic)	-	0	-
Cl.6.2.6(Ageing Test)	-	0	-
Cl.6.2.L(Wall Thickness)	-	300	-
Cl.5.1.l(Outside Diameter)	-	300	-
Cl.5.1.l(Outside Diameter)	-	300	-
Cl.5(Di men sion)	-	300	-
Cl.4.1.4(Carbon Black Di spersion)	-	1000	-
Cl.4.1.4(Carbon Black Di spersion)	-	1000	-
Cl.4.1.4(Carbon Black Di spersion)	-	1000	-
Cl.4.1.4(Carbon Black Content)	-	1000	-
Cl.4.1.4(Carbon Black Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Volatile Matter)	-	1000	-
Cl.4.1.3, T-1(Volatile Matter)	-	1000	-
Cl.4.1.3, T-1(Volatile Matter)	-	1000	-
Cl.4.1.3, T-1(Volatile Matter)	-	1000	-
Cl.4.1.3, T-1(Volatile Matter)	-	1000	-
Cl.4.1.3, T-1(Volatile Matter)	-	1000	-
Cl.4.1.3(Thermal Stabi lity)	-	2500	-
Cl.4.1.3(MFR Test)	-	1500	-
Cl.4.1.3(MFR Test)	-	1500	-
Cl.4.1.3(MFR Test)	-	1500	-
4.2(Metallic Couplers)	-	0	-
4.2(Metallic Couplers)	-	0	-
6.3.4()	-	0	-
6.3.3(Material Identification - Insert Valve Coupler)	-	0	-
6.2, 6.2.1(Quick Coupled Fittings)	-	0	-
6.1.2.2(Hydraulic Proof Test)	-	2500	-
6.1.1, 6.1.1.1(Leakage Test)	-	1500	-
6.1(Quick Coupled Pipes and Fittings)	-	0	-
4.2.7(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.6(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.5(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.4(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.3(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.2(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.1(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.1.4(b)(Holding Attachments for Coupler Parts)	-	1500	-
4.1.4(a)(Holding Attachments for Coupler Parts)	-	1500	-
4.1 .1.2.2(HDPE couplers)	-	0	-
4.1 .1.2.1(HDPE couplers)	-	0	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Aluminium Content)	-	300	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Titanium Content)	-	300	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Tin Content)	-	300	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Lead Content)	-	300	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Zinc Content)	-	300	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Nickel Content)	-	300	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Manganese Content)	-	300	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Iron Content)	-	300	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Magnesium Content)	-	300	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Silicon Content)	-	300	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Copper Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Cr + Mn)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Chromium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Titanium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Zinc Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Manganese Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Iron Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Silicon Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Magnesium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Copper Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Aluminium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Cr + Mn)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Chromium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Titanium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Zinc Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Manganese Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Iron Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Silicon Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Magnesium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Copper Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Aluminium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Cr + Mn)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Chromium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Titanium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Zinc Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Manganese Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Iron Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Silicon Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Magnesium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Copper Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Aluminium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Remarks)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Chromium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Titanium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Zinc Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Manganese Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Iron Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Silicon Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Magnesium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Copper Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Aluminium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Remarks)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Chromium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Titanium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Zinc Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Manganese Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Iron Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Silicon Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Magnesium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Copper Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Aluminium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Remarks)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Chromium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Titanium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Zinc Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Manganese Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Iron Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Silicon Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Magnesium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Copper Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Aluminium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Remarks)	-	300	-
4.1 (b)(HDPE couplers —)	-	0	-
4(QUICK COUPLED FITTINGS)	-	0	-
3(QUICK COUPLED PIPES)	-	0	-
4.1(Quick Coupled Male and Female Couplers)	-	0	-
3(CLASSIFICATION OF PIPES)	-	0	-
7.5(Density)	-	750	-
7.6(Melt Flow Rate)	-	1500	For BIS samples: 1.5 times of BIS testing charges (10% discount to BIS)

10 Mar, 2030

-
-

12251

BIS, Central Laboratory (CL)

None

IS 2556 : Part 6 (2021)

Vitreous China sanitary appliances - Specification: Part 6 Specific requirements of urinal and partition plates (fifth revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 4 (GENERAL REQUIREMENTS)	-
Cl 5 (PATTERNS AND SIZES)	-
Cl 6.1 (DIMENSIONS AND TOLERANCES)	-
Cl 7 (CONSTRUCTION)	-
Cl 8 ()	-
Cl 6.1 (DIMENSIONS AND TOLERANCES)	-
Cl 6.2 (DIMENSIONS AND TOLERANCES)	-
Cl 6.3 (DIMENSIONS AND TOLERANCES)	-
Cl 7 (CONSTRUCTION)	-
Cl 4 (GENERAL REQUIREMENTS)	-

-
-

12252

PIONEER TESTING LABORATORY PRIVATE LIMITED

8176806

IS 13592 (2013)

Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Soil and Waste Discharge System Inside and Outside Buiildings Including Ventilation and Rainwater System

All type

20500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5(Surface colour of the pipes shall be dark shade of grey)	-	200	-
Cl6.3(The composition shall be based on PVC resin having a K-value of 64 or greater when tested in accordance with IS 4669)	-	10000	-
Cl.7.1(Mean out side Diameter (For less than or equal to 40 mm- Average of 8 , For higher diameters up to 110 mm average of 6))	-	200	-
Cl.7.1(Outside Diameter at any point (Take 8 reading reported minimum, maximum))	-	200	-
Cl.7.1(Wall thickness "minimum,maximum" (Take 8 reading))	-	200	-
Cl.7.2(Pipes shall be supplied in nominal lengths of 2, 3, 4 or 6 metres either plain or with socket for solvent cementing/grooved socket. Tolerances on specified length shall be + 10 mm and – 0 mm.The nominal length of the pipe with socket for solvent cementing/grooved socket shall be as given in Fig. 1.)	-	200	-
Cl.7.3.1(Minimum wall thickness of socket on pipes shall be as given in Table 2 read with Fig. 2 and Fig. 3.)	-	250	-
Cl.7.3.2(Dimensions of sockets for solvent cementing and grooved sockets of pipes shall be as given in Tables 3 and 4 respectively, read with Fig. 2 and 3.)	-	250	-
Cl.8.1(The internal and external surface of the pipes shall be smooth and clean, and free from grooving and other defects. The end shall be clearly cut and shall be square with the axis of the pipe. The end may be chamfered on the plain side.)	-	200	-
Cl.8.2(When tested by the method described in IS 12235 (Part 5), a length of pipe sample of 200 ± 20 mm shall not alter in length by more than 5 percent. In the case of socket ended pipes, this test shall be carried out on the plain portion of pipe taken at least 100 mm away from the root of the socket.)	-	1000	-
Cl8.3(This test shall be carried out for socket end pipes only. When tested by the method described in IS 12235 (Part 6), the test specimens shall not show blisters, excessive delamination or cracking or signs of weld line splitting.)	-	1000	-
Cl.8.4(When determined in accordance with IS 12235 (Part 2), the vicat softening temperature of the specimen shall not be less than 79°C.)	-	1000	-
Cl.8.5(After the required period of exposure, the tensile strengths of two samples when tested as per IS 12235 (Part 13) shall not show difference of more than 20 percent of their initial tensile strengths)	-	2500	-
Cl. 9, IS 12235 Part 7(Resistance to Sulphuric Acid)	-	1200	-
Cl.10.1(When tested by method prescribed in IS 12235 (Part 9),the pipe shall have a true impact rate of not more than 10 percent. Mass of striker and height of fall shall be as per Annex A.)	-	1200	-
Cl.10.2(When determined in accordance with the method described in IS 12235 (Part 13), the tensile strength at break shall not be less than 45 MPa.)	-	750	-
Cl.10.3(The axial shrinkage shall not exceed 2 percent when determined in accordance with Annex B.)	-	2000	-
Cl.11.(Jointing of solvent cementing joints is to be carried out using solvent conforming to IS 14182. Apply a pressure of 0.05 MPa for a period of 15 min and there should be no leakage at any joint.)	-	1200	-
Cl. 12, IS 12235 Part 11(Resistance to Di-Chloro-Methane)	-	1500	-
8.6(Effect on Water Test)	-	7500	For BIS samples: 1.5 times of BIS testing charges (10% discount to BIS)
14(Marking)	-	500	For BIS samples: 1.5 times of BIS testing charges (10% discount to BIS)

10 Mar, 2030

-
-

12253

PIONEER TESTING LABORATORY PRIVATE LIMITED

8176806

IS 15778 (2007)

Chlorinated polyvinyl chloride (Cpvc) pipes for potable hot and cold water distribution supplies - Specification

All type

120000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5 Table 1(Classification of pipes)	-	500	-
6.2.1 Annex B(Chloride Content of Resin)	-	12000	-
6.3(Compound Properties)	-	25000	-
6.3.1 Annex B(Chloride content)	-	2000	-
6.3.2 Annex C(Verification of the Malfunction Temperature, Tmal: )	-	12500	-
6.3.2 IS 13360 (Part 3/See 1)(Density)	-	750	-
7.1 IS 12235 (Part 1) Table 2(Dimension of Pipes: Mean outside Diameter)	-	200	-
7.1,7.1.1 IS 12235 (Part 1) Table 2(Outside Diameter at any point)	-	200	-
7.1.3 (Effective length)	-	250	-
8(Pipe Ends)	-	250	-
9.1(Visual Appearance)	-	200	-
9.2 IS 12235 (Part 3)(Opacity)	-	500	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (first extraction))	-	1500	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (third extraction))	-	1500	-
Cl. 9.3,IS 4985 Cl. 10.3(Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	1500	-
Cl. 9.3,IS 4985 Cl. 10.3(Cadmium (for all three extracts) )	-	1500	-
7.1.2 IS 12235 (Part 1) Table 2(Wall Thickness )	-	200	-
Cl. 9.3,IS 4985 Cl. 10.3(Mercury (for all three extracts) )	-	1500	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction) )	-	1500	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances including di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate')	-	1500	-
9.4 IS 12235(Part 5/Sec 1 and Sec 2)(Reversion Test : When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.)	-	1000	-
9.5 IS 12235(Part 2)(Vicat Softening Temperature: When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen shall not be less than 110°C.)	-	1500	-
9.6 IS 12235(Part 14)(Density)	-	750	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	1500	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	3500	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	10500	-
10.2 Table 3 IS 12235 (Part 8/Sec 1)(Thermal Stability by Hydrostatic Pressure Testing)	-	70000	-
10.3 IS 4985 Table 4(Resistance to External Blow at O°C: When tested by the method prescribed in IS 4985, with classified striker mass and drop height as given in Table 4, the pipe shall have a true impact rate of not more than 10 percent.)	-	3000	-
10.4 IS 12235(Part 19)(Flattening Test)	-	1000	-
10.5 IS 12235(Part 13)(Tensile Strength : When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C. )	-	1500	-
7.1.2(Wall Thickness (Maximum))	-	200	-
7.1.1(Outside Diameter at any point (Maximum))	-	200	-
6.3(K value Test)	-	10000	-
6.3.3(Density)	-	750	For BIS samples: 1.5 times of BIS testing charges (10% discount to BIS)
10.5 IS 12235(Part 13)(Tensile Strength : When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C. )	-	1500	-
10.4 IS 12235(Part 19)(Flattening Test)	-	1000	-
10.3 IS 4985 Table 4(Resistance to External Blow at O°C: When tested by the method prescribed in IS 4985, with classified striker mass and drop height as given in Table 4, the pipe shall have a true impact rate of not more than 10 percent.)	-	3000	-
10.2 Table 3 IS 12235 (Part 8/Sec 1)(Thermal Stability by Hydrostatic Pressure Testing)	-	70000	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	10500	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	3500	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	1500	-
10.0(Mechanical Properties)	-	0	-
9.6 IS 12235(Part 14)(Density)	-	750	-
9.5 IS 12235(Part 2)(Vicat Softening Temperature: When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen shall not be less than 110°C.)	-	0	-
9.4 IS 12235(Part 5/Sec 1 and Sec 2)(Reversion Test : When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.)	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances including di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate')	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction) )	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Mercury (for all three extracts) )	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Cadmium (for all three extracts) )	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (third extraction))	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (first extraction))	-	0	-
9.2 IS 12235 (Part 3)(Opacity)	-	0	-
9.1(Visual Appearance)	-	0	-
9.1(Visual Appearance)	-	0	-
9.0(PHYSICAL AND 1CHARACTERISTICS)	-	0	-
8.0(Pipe Ends)	-	0	-
7.1.3 (Effective length)	-	0	-
7.1.2 IS 12235 (Part 1)Table 2(Wall Thickness (Minimum))	-	0	-
7.1,7.1.1 IS 12235 (Part 1)Table 2(Outside Diameter at any point (Minimum))	-	0	-
7.1 IS 12235 (Part 1) Table 2(Dimension of Pipes: Mean outside Diameter)	-	0	-
6.3.2 IS 13360 (Part 3/See 1)(Density)	-	750	-
6.3.2 Annex C(Verification of the Malfunction Temperature, Tmal: )	-	12500	-
6.3.1 Annex B(Chloride content)	-	2000	-
6.3(Compound Properties)	-	25000	-
6.2.1 Annex B(Chloride Content of Resin)	-	12000	-
10(Mechanical Properties)	-	0	-
9.1(Visual Appearance)	-	500	-
9(PHYSICAL AND CHEMICAL CHARACTERISTICS)	-	0	-
5 Table 1(Classification of pipes)	-	0	For BIS samples: 1.5 times of BIS testing charges (10% discount to BIS)

10 Mar, 2030

-
-

12254

PIONEER TESTING LABORATORY PRIVATE LIMITED

8176806

IS 9537 : Part 3 (1983)

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials

All type

9950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Marking)	-	200	-
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	200	-
6.3(Standard Mark on Conduit)	-	200	-
7.1.1(Maximum and minimum outside diameter of socket)	-	200	-
7.1.1 Table-2(Length of Socket end)	-	200	-
7.1.2(Maximum and minimum outside diameter of conduit)	-	200	-
7.2(Minimum inside diameter of conduit)	-	200	-
7.3(Length of conduit)	-	200	-
7.4(Unifomity of The wall Thickness)	-	200	-
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	750	-
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	750	-
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	750	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	750	-
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	1000	-
10(Resistance to Heat -Ball presure test)	-	1200	-
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	1500	-
12(Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	2000	-
12(Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	1500	-
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	1200	-
6.1 - a(Marking)	-	200	-
6.1 - b(Marking)	-	200	-
6.1 - c(Marking)	-	200	-
6.1 - d(Marking)	-	200	-
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	200	-
6.3(Standard Mark on Conduit)	-	200	-
7.1.1 Fig.7(Maximum outside diameter of socket)	-	200	-
7.1.1 Fig.8(Maximum inside diameter of socket)	-	200	-
7.1.1 Table-2(Length of Socket end)	-	200	-
7.1.2 Fig.1(Maximum outside diameter of conduit)	-	200	-
7.1.2 Fig.2(Minimum outside diameter of conduit)	-	200	-
7.2 Fig.3(Minimum inside diameter of conduit)	-	200	-
7.3(Length of conduit)	-	200	-
7.4(Unifomity of The wall Thickness)	-	200	-
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	750	-
9.2(Bending Test At Room Temp)	-	750	-
9.2(Bending Test At Low Temp (-5 ±2°C))	-	750	-
9.3(Compression Test at Full force applied (On load))	-	750	-
9.3(Compression Test (after removal of force) as per caluse 9.3.3 of IS: 9537 (Part 1)-1980)	-	750	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	750	-
9.5 Fig.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	1000	-
10.0(Resistance to Heat -Ball presure test)	-	1500	-
11.0(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	1500	-
12(3 Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	2000	-
12(3 Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	1500	-
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	1200	For BIS samples: 1.5 times of BIS testing charges (10% discount to BIS)

10 Mar, 2030

-
-

12255

PIONEER TESTING LABORATORY PRIVATE LIMITED

8176806

IS 4985 (2021)

UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES SPECIFICATION Fourth Revision

All type

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1(Colour)	-	200	-
10.1(Surface Finish)	-	200	-
7.2.1.1 Table3(Angle of taper (Note-1))	-	500	-
10.7(Sulphated Ash Content)	-	1500	-
5(CLASSIFICATION OF PIPES)	-	200	-
Cl-7.1(Mean out side Diameter (For less than or equal to 40 mm- Average of 8 , For higher diameters up to 110 mm average of 6))	-	200	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	200	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	200	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. Variation)	-	200	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	200	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	200	-
7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum))	-	200	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	200	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum))	-	200	-
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	200	-
Cl- 7.2(Socket length (Take 4 reading & minimum will be reported))	-	250	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	250	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum))	-	250	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum))	-	250	-
7.2.1.2(a)-Table 5(DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement)	-	250	-
7.2.1.2-Table 4(DIMENSIONS-Sockets for elastomeric sealing ring joints-Socket inner Diameter)	-	250	-
9.1(PIPE ENDS)	-	350	-
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	250	-
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	500	-
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	1000	-
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	1500	-
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	750	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	12500	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	2000	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	12500	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	200	-
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	2000	-
11.2(Resistance to External Blows at 0°C)	-	3000	-
10.3(Effect on Water Test)	-	7500	-
6.1.2(PVC Resin)	-	10000	-
7.1.3(mean outside diameter, outside diameter at any point, and wall thickness of plumbing pipes)	-	250	-
7.1.4(Length)	-	350	-
6.1.1(VCM Content)	-	4500	-
7.2.1.2b(Maximum inner diameter of groove)	-	2500	For BIS samples: 1.5 times of BIS testing charges (10% discount to BIS)
7.2.1(DIMENSIONS-Socket)	-	0	-
8(SEALING RINGS)	-	0	-
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	0	-
13.1(Marking)	-	500	For BIS samples: 1.5 times of BIS testing charges (10% discount to BIS)

10 Mar, 2030

-
-

12256

Ahmedabad Textile Industry's Research Association (ATIRA), Ahmedabad

7173002

IS 17286 (2019)

Textiles – Water-proof multipurpose rain poncho with convertibility as bivouac – Specification

50290 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4(STITCHING)	-	5400	-
Clause 4.1(Tolerances)	-	150	-
Clauses 6.1, Table 1 (i)(Nature of fibre/filament)	-	400	-
Clauses 6.1, Table 1 (iii)(Width, cm)	-	150	-
Clauses 6.1, Table 1 (iv)(End/dm, Min)	-	200	-
Clauses 6.1, Table 1 (v)(Picks/dm, Min)	-	0	-
Clauses 6.1, Table 1 (vi)(Mass (Single layer), g/sq. m)	-	400	-
Clauses 6.1, Table 1 (vii)(Mass of de-proofed fabric, g/sq. m)	-	600	-
Clauses 6.1, Table 1 (viii)(Breaking strength (strip test) (5 × 20 cm fabric between grips), N, Min: a) Warp-wise b) Weft-wise)	-	800	-
Clauses 6.1, Table 1 (ix)(Tearing strength (Method A-1), N, Min: a) Warp-wise b) Weft-wise)	-	600	-
Clauses 6.1, Table 1 (x)(Colour fastness to washing, Test C(3): a) Change in colour b) Staining on adjacent fabric)	-	350	-
Clauses 6.1, Table 1 (xi)(Colour fastness to rubbing a) Dry b) Wet)	-	200	-
Clauses 6.1, Table 1 (xii)(Colour fastness to light)	-	1500	-
Clauses 6.1, Table 1 (xiii)(Dimensional change due to relaxation, Max, percent: a) Warp-wise b) Weft-wise)	-	300	-
Clauses 6.1, Table 1 (xiv)(Resistance to accelerated ageing at 70°C ± 1°C for 168 h in hot air circulating oven)	-	9440	-
Clauses 6.1, Table 1 (xv)(Resistance to low temperature [(-)30 ± 2°C] for 6 h)	-	1000	-
Clauses 6.1, Table 1 (xvii)(Blocking)	-	1600	-
Clauses 6.1, Table 1 (xviii)(pH value of aqueous extract (Cold method))	-	300	-
Clauses 6.1, Table 1 (xix)(Water repellency (face side- uncoated), spray rating, Min)	-	250	-
Clauses 6.1, Table 1 (xx)(Hydrostatic pressure head test (Water column height at 60 cm for 60 min), (face side- uncoated))	-	600	-
Clauses 6.1, Table 1 (xxiii)(Bending length, cm, Max: a) Warp-wise b) Weft-wise)	-	300	-
Clauses 6.1, Table 1 (xxiv)(Separation of polyurethane (PU) film)	-	200	-
Clause 6.2, Table 2 (i)(Nature of fibre/filament)	-	400	-
Clause 6.2, Table 2 (ii)(Length, cm)	-	150	-
Clause 6.2, Table 2 (iii)(Mass per linear metre, g)	-	400	-
Clause 6.2, Table 2 (iv)(Breaking strength (200 mm gauge length), N, Min)	-	800	-
Clause 6.2, Table 2 (v)(Colour fastness to washing, Test C(3): a) Change in colour b) Staining on adjacent fabric)	-	350	-
Clause 6.2, Table 2 (vi)(Colour fastness to light)	-	1500	-
Clause 6.2, Table 2 (vii)(Dimensional change due to relaxation, length wise directions, percent, Max)	-	300	-
Clause 6.2, Table 2 (viii)(pH value of aqueous extract (cold method))	-	300	-
Clause 6.3, Table 3 (i)(Nature of fibre/filament)	-	400	-
Clause 6.3, Table 3 (ii)(Number of ends in full width, Min)	-	250	-
Clause 6.3, Table 3 (iii)(Number of picks/dm, Min)	-	400	-
Clause 6.3, Table 3 (iv)(Width, cm)	-	150	-
Clause 6.3, Table 3 (v)(Mass per linear metre, g)	-	400	-
Clause 6.3, Table 3 (vi)(Colour fastness to washing, Test C(3): a) Change in colour b) Staining on adjacent fabric)	-	350	-
Clause 6.3, Table 3 (vii)(Colour fastness to light)	-	1500	-
Clauses 6.1, Table 1 (ii)(Nature of coating)	-	400	-
Clauses 6.1, Table 1 (xxii)(Moisture vapour transmission, mg/cm2 /h, Min)	-	3000	-
Clauses 6.1, Table 1 (i)(Nature of fibre/filament)	-	0	-
Clauses 6.1, Table 1 (ii)(Nature of coating)	-	0	-
Clauses 6.1, Table 1 (iii)(Width, cm)	-	0	-
Clauses 6.1, Table 1 (iv)(End/dm, Min)	-	0	-
Clauses 6.1, Table 1 (v)(Picks/dm, Min)	-	0	-
Clauses 6.1, Table 1 (vi)(Mass (Single layer), g/sq. m)	-	0	-
Clauses 6.1, Table 1 (vii)(Mass of de-proofed fabric, g/sq. m)	-	0	-
Clauses 6.1, Table 1 (viii)(Breaking strength (strip test) (5 × 20 cm fabric between grips), N, Min: a) Warp-wise b) Weft-wise)	-	0	-
Clauses 6.1, Table 1 (ix)(Tearing strength (Method A-1), N, Min: a) Warp-wise b) Weft-wise)	-	0	-
Clauses 6.1, Table 1 (x)(Colour fastness to washing, Test C(3): a) Change in colour b) Staining on adjacent fabric)	-	0	-
Clauses 6.1, Table 1 (xi)(Colour fastness to rubbing a) Dry b) Wet)	-	0	-
Clauses 6.1, Table 1 (xii)(Colour fastness to light)	-	0	-
Clauses 6.1, Table 1 (xiii)(Dimensional change due to relaxation, Max, percent: a) Warp-wise b) Weft-wise)	-	0	-
Clauses 6.1, Table 1 (xiv)(Resistance to accelerated ageing at 70°C ± 1°C for 168 h in hot air circulating oven)	-	0	-
Clauses 6.1, Table 1 (xv)(Resistance to low temperature [(-)30 ± 2°C] for 6 h)	-	0	-
Clauses 6.1, Table 1 (xvii)(Blocking)	-	0	-
Clauses 6.1, Table 1 (xviii)(pH value of aqueous extract (Cold method))	-	0	-
Clauses 6.1, Table 1 (xix)(Water repellency (face side- uncoated), spray rating, Min)	-	0	-
Clauses 6.1, Table 1 (xx)(Hydrostatic pressure head test (Water column height at 60 cm for 60 min), (face side- uncoated))	-	0	-
Clauses 6.1, Table 1 (xxii)(Moisture vapour transmission, mg/cm2 /h, Min)	-	0	-
Clauses 6.1, Table 1 (xxiii)(Bending length, cm, Max: a) Warp-wise b) Weft-wise)	-	0	-
Clauses 6.1, Table 1 (xxiv)(Separation of polyurethane (PU) film)	-	0	-
Clause 6.2, Table 2 (i)(Nature of fibre/filament)	-	0	-
Clause 6.2, Table 2 (ii)(Length, cm)	-	0	-
Clause 6.2, Table 2 (iii)(Mass per linear metre, g)	-	0	-
Clause 6.2, Table 2 (iv)(Breaking strength (200 mm gauge length), N, Min)	-	0	-
Clause 6.2, Table 2 (v)(Colour fastness to washing, Test C(3): a) Change in colour b) Staining on adjacent fabric)	-	0	-
Clause 6.2, Table 2 (vi)(Colour fastness to light)	-	0	-
Clause 6.2, Table 2 (vii)(Dimensional change due to relaxation, length wise directions, percent, Max)	-	0	-
Clause 6.2, Table 2 (viii)(pH value of aqueous extract (cold method))	-	0	-
Clause 6.3, Table 3 (i)(Nature of fibre/filament)	-	0	-
Clause 6.3, Table 3 (ii)(Number of ends in full width, Min)	-	0	-
Clause 6.3, Table 3 (iii)(Number of picks/dm, Min)	-	0	-
Clause 6.3, Table 3 (iv)(Width, cm)	-	0	-
Clause 6.3, Table 3 (v)(Mass per linear metre, g)	-	0	-
Clause 6.3, Table 3 (vi)(Colour fastness to washing, Test C(3): a) Change in colour b) Staining on adjacent fabric)	-	0	-
Clause 6.3, Table 3 (vii)(Colour fastness to light)	-	0	-
Clauses 6.1, Table 1 (i)(Nature of fibre/filament)	-	0	-
Clauses 6.1, Table 1 (ii)(Nature of coating)	-	0	-
Clauses 6.1, Table 1 (iii)(Width, cm)	-	0	-
Clauses 6.1, Table 1 (iv)(End/dm, Min)	-	0	-
Clauses 6.1, Table 1 (v)(Picks/dm, Min)	-	0	-
Clauses 6.1, Table 1 (vi)(Mass (Single layer), g/sq. m)	-	0	-
Clauses 6.1, Table 1 (vii)(Mass of de-proofed fabric, g/sq. m)	-	0	-
Clauses 6.1, Table 1 (viii)(Breaking strength (strip test) (5 × 20 cm fabric between grips), N, Min: a) Warp-wise b) Weft-wise)	-	0	-
Clauses 6.1, Table 1 (ix)(Tearing strength (Method A-1), N, Min: a) Warp-wise b) Weft-wise)	-	0	-
Clauses 6.1, Table 1 (x)(Colour fastness to washing, Test C(3): a) Change in colour b) Staining on adjacent fabric)	-	0	-
Clauses 6.1, Table 1 (xi)(Colour fastness to rubbing a) Dry b) Wet)	-	0	-
Clauses 6.1, Table 1 (xii)(Colour fastness to light)	-	0	-
Clauses 6.1, Table 1 (xiii)(Dimensional change due to relaxation, Max, percent: a) Warp-wise b) Weft-wise)	-	0	-
Clauses 6.1, Table 1 (xiv)(Resistance to accelerated ageing at 70°C ± 1°C for 168 h in hot air circulating oven)	-	0	-
Clauses 6.1, Table 1 (xv)(Resistance to low temperature [(-)30 ± 2°C] for 6 h)	-	0	-
Clauses 6.1, Table 1 (xvii)(Blocking)	-	0	-
Clauses 6.1, Table 1 (xviii)(pH value of aqueous extract (Cold method))	-	0	-
Clauses 6.1, Table 1 (xix)(Water repellency (face side- uncoated), spray rating, Min)	-	0	-
Clauses 6.1, Table 1 (xx)(Hydrostatic pressure head test (Water column height at 60 cm for 60 min), (face side- uncoated))	-	0	-
Clauses 6.1, Table 1 (xxii)(Moisture vapour transmission, mg/cm2 /h, Min)	-	0	-
Clauses 6.1, Table 1 (xxiii)(Bending length, cm, Max: a) Warp-wise b) Weft-wise)	-	0	-
Clauses 6.1, Table 1 (xxiv)(Separation of polyurethane (PU) film)	-	0	-
Clause 6.2, Table 2 (i)(Nature of fibre/filament)	-	0	-
Clause 6.2, Table 2 (ii)(Length, cm)	-	0	-
Clause 6.2, Table 2 (iii)(Mass per linear metre, g)	-	0	-
Clause 6.2, Table 2 (iv)(Breaking strength (200 mm gauge length), N, Min)	-	0	-
Clause 6.2, Table 2 (v)(Colour fastness to washing, Test C(3): a) Change in colour b) Staining on adjacent fabric)	-	0	-
Clause 6.2, Table 2 (vi)(Colour fastness to light)	-	0	-
Clause 6.2, Table 2 (vii)(Dimensional change due to relaxation, length wise directions, percent, Max)	-	0	-
Clause 6.2, Table 2 (viii)(pH value of aqueous extract (cold method))	-	0	-
Clause 6.3, Table 3 (i)(Nature of fibre/filament)	-	0	-
Clause 6.3, Table 3 (ii)(Number of ends in full width, Min)	-	0	-
Clause 6.3, Table 3 (iii)(Number of picks/dm, Min)	-	0	-
Clause 6.3, Table 3 (iv)(Width, cm)	-	0	-
Clause 6.3, Table 3 (v)(Mass per linear metre, g)	-	0	-
Clause 6.3, Table 3 (vi)(Colour fastness to washing, Test C(3): a) Change in colour b) Staining on adjacent fabric)	-	0	-
Clause 6.3, Table 3 (vii)(Colour fastness to light)	-	0	-
Clauses 6.1, Table 1 (i)(Nature of fibre/filament)	-	0	-
Clauses 6.1, Table 1 (ii)(Nature of coating)	-	0	-
Clauses 6.1, Table 1 (iii)(Width, cm)	-	0	-
Clauses 6.1, Table 1 (iv)(End/dm, Min)	-	0	-
Clauses 6.1, Table 1 (v)(Picks/dm, Min)	-	0	-
Clauses 6.1, Table 1 (vi)(Mass (Single layer), g/sq. m)	-	0	-
Clauses 6.1, Table 1 (vii)(Mass of de-proofed fabric, g/sq. m)	-	0	-
Clauses 6.1, Table 1 (viii)(Breaking strength (strip test) (5 × 20 cm fabric between grips), N, Min: a) Warp-wise b) Weft-wise)	-	0	-
Clauses 6.1, Table 1 (ix)(Tearing strength (Method A-1), N, Min: a) Warp-wise b) Weft-wise)	-	0	-
Clauses 6.1, Table 1 (x)(Colour fastness to washing, Test C(3): a) Change in colour b) Staining on adjacent fabric)	-	0	-
Clauses 6.1, Table 1 (xi)(Colour fastness to rubbing a) Dry b) Wet)	-	0	-
Clauses 6.1, Table 1 (xii)(Colour fastness to light)	-	0	-
Clauses 6.1, Table 1 (xiii)(Dimensional change due to relaxation, Max, percent: a) Warp-wise b) Weft-wise)	-	0	-
Clauses 6.1, Table 1 (xiv)(Resistance to accelerated ageing at 70°C ± 1°C for 168 h in hot air circulating oven)	-	0	-
Clauses 6.1, Table 1 (xv)(Resistance to low temperature [(-)30 ± 2°C] for 6 h)	-	0	-
Clauses 6.1, Table 1 (xxii)(Moisture vapour transmission, mg/cm2 /h, Min)	-	0	-
Clauses 6.1, Table 1 (xviii)(pH value of aqueous extract (Cold method))	-	0	-
Clauses 6.1, Table 1 (xix)(Water repellency (face side- uncoated), spray rating, Min)	-	0	-
Clauses 6.1, Table 1 (xx)(Hydrostatic pressure head test (Water column height at 60 cm for 60 min), (face side- uncoated))	-	0	-
Clauses 6.1, Table 1 (xxiii)(Bending length, cm, Max: a) Warp-wise b) Weft-wise)	-	0	-
Clauses 6.1, Table 1 (xxiv)(Separation of polyurethane (PU) film)	-	0	-
Clause 6.2, Table 2 (i)(Nature of fibre/filament)	-	0	-
Clause 6.2, Table 2 (ii)(Length, cm)	-	0	-
Clause 6.2, Table 2 (iii)(Mass per linear metre, g)	-	0	-
Clause 6.2, Table 2 (iv)(Breaking strength (200 mm gauge length), N, Min)	-	0	-
Clause 6.2, Table 2 (v)(Colour fastness to washing, Test C(3): a) Change in colour b) Staining on adjacent fabric)	-	0	-
Clause 6.2, Table 2 (vi)(Colour fastness to light)	-	0	-
Clause 6.2, Table 2 (vii)(Dimensional change due to relaxation, length wise directions, percent, Max)	-	0	-
Clause 6.2, Table 2 (viii)(pH value of aqueous extract (cold method))	-	0	-
Clause 6.3, Table 3 (i)(Nature of fibre/filament)	-	0	-
Clause 6.3, Table 3 (ii)(Number of ends in full width, Min)	-	0	-
Clause 6.3, Table 3 (iii)(Number of picks/dm, Min)	-	0	-
Clause 6.3, Table 3 (iv)(Width, cm)	-	0	-
Clause 6.3, Table 3 (v)(Mass per linear metre, g)	-	0	-
Clause 6.3, Table 3 (vi)(Colour fastness to washing, Test C(3): a) Change in colour b) Staining on adjacent fabric)	-	0	-
Clause 6.3, Table 3 (vii)(Colour fastness to light)	-	0	-
Clause 4(STITCHING)	-	0	-
Clause 4.1(Tolerances)	-	0	-
Clauses 6.4(Slide fastener)	-	5500	-
Clauses 6.5(Hook and loop fastener)	-	9000	-

-
-

12257

Ahmedabad Textile Industry's Research Association (ATIRA), Ahmedabad

7173002

IS 16726 (2018)

Textiles – Pouch for ammunition and grenades made of disruptive pattern nylon 6 6 – Specification

33980 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4(STITCHING)	-	750	-
Clause 5(FREEDOM FROM DEFECT)	-	200	-
Clauses 6.1 and 6.2, Table 2 (i)(Nature of fibre/filament)	-	400	-
Clauses 6.1 and 6.2, Table 2 (iii)(Weave)	-	200	-
Clauses 6.1 and 6.2, Table 2 (iv)(End/dm)	-	200	-
Clauses 6.1 and 6.2, Table 2 (v)(Picks/dm)	-	0	-
Clauses 6.1 and 6.2, Table 2 (vi)(Mass, g/sq. m)	-	400	-
Clauses 6.1 and 6.2, Table 2 (vii)("Tearing strength, N, Min: (a) Warpway (b) Weftway")	-	600	-
Clauses 6.1 and 6.2, Table 2 (viii)(Abrasion resistance (Martindale), Using abradant ‘Emery paper No. 600’ at load of 200 g on uncoated surface)	-	1000	-
Clauses 6.1 and 6.2, Table 2 (ix)("Colour fastness to washing, Test C (3), Min: (a) Change in colour (b) Staining on adjacent fabric")	-	350	-
Clauses 6.1 and 6.2, Table 2 (x)("Colour fastness to perspiration, Min: (a) Change in colour (b) Staining on adjacent fabric")	-	400	-
Clauses 6.1 and 6.2, Table 2 (xi)("Colour fastness to rubbing, Min: (a) Dry (b) Wet")	-	200	-
Clauses 6.1 and 6.2, Table 2 (xii)(Colour fastness to light, Min)	-	1500	-
Clauses 6.1 and 6.2, Table 2 (xiii)(Dimensional change due to relaxation, percentage, Max: (a) Warpway (b) Weftway)	-	300	-
Clauses 6.1 and 6.2, Table 2 (xiv)(Water proofness at 30 cm water column height for 60 min)	-	250	-
Clauses 6.1 and 6.2, Table 2 (xv)(Water repellency (uncoated face), Spray rating, Min)	-	250	-
Clauses 6.1 and 6.2, Table 2 (xvii)(Resistance to accelerated ageing at 70 ± 1°C for 168 h in air circulating oven)	-	9440	-
Clause 6.3, Table 3 (i)(Nature of fibre/filament)	-	400	-
Clause 6.3, Table 3 (ii)(Number of holes per square inch (Rectangular in shape))	-	200	-
Clause 6.3, Table 3 (iii)(Mass, g/sq. m)	-	400	-
Clause 6.4 Table 4 (v)(Breaking strength, N, Min (2.5 cm × full width fabric between grips))	-	800	-
Clause 6.4, Table 4 (vi)(Colour fastness to washing, Test C(3), Min: a) Change in colour b) Staining on adjacent fabric)	-	350	-
Clause 6.4, Table 4 (vii)(Colour fastness to light, Min)	-	1500	-
Clause 6.4, Table 4 (vii)(pH value of aqueous extract (Cold method))	-	300	-
Clause 6.5, Table 5 (i)(Nature of fibre/filament)	-	400	-
Clause 6.5, Table 5 (i)(Colour fastness to washing, Test C(3), Min: a) Change in colour b) Staining on adjacent fabric)	-	350	-
Clause 6.5, Table 5 (i)(Colour fastness to light, Min)	-	1500	-
Clause 6.5, Table 5 (i)(Dimensional change due to relaxation, percentage, Max: a) Warpway b) Weftway)	-	300	-
Clause 6.5, Table 5 (i)(pH value of aqueous extract (Cold method))	-	300	-
Clause 6.9, Table 6 (i)(Nature of material)	-	400	-
Clause 6.9, Table 6 (i)(Resistance to accelerated ageing)	-	1520	-
6.9 - Table 6 - (iii)(Resistance to low temperature)	-	1520	-
Clause 6.9, Table 6 (i)(Colour fastness to light, Min)	-	1500	-
6.9 - Table 6 - (v)(Pull load)	-	600	-
Clause 4(STITCHING)	-	750	-
Clause 5(FREEDOM FROM DEFECT)	-	0	-
Clauses 6.1 and 6.2, Table 2 (i)(Nature of fibre/filament)	-	0	-
Clauses 6.1 and 6.2, Table 2 (iii)(Weave)	-	0	-
Clauses 6.1 and 6.2, Table 2 (iv)(End/dm)	-	0	-
Clauses 6.1 and 6.2, Table 2 (v)(Picks/dm)	-	0	-
Clauses 6.1 and 6.2, Table 2 (vi)(Mass, g/sq. m)	-	0	-
Clauses 6.1 and 6.2, Table 2 (vii)("Tearing strength, N, Min: (a) Warpway (b) Weftway")	-	0	-
Clauses 6.1 and 6.2, Table 2 (viii)(Abrasion resistance (Martindale), Using abradant ‘Emery paper No. 600’ at load of 200 g on uncoated surface)	-	0	-
Clauses 6.1 and 6.2, Table 2 (ix)("Colour fastness to washing, Test C (3), Min: (a) Change in colour (b) Staining on adjacent fabric")	-	0	-
Clauses 6.1 and 6.2, Table 2 (x)("Colour fastness to perspiration, Min: (a) Change in colour (b) Staining on adjacent fabric")	-	0	-
Clauses 6.1 and 6.2, Table 2 (xi)("Colour fastness to rubbing, Min: (a) Dry (b) Wet")	-	0	-
Clauses 6.1 and 6.2, Table 2 (xii)(Colour fastness to light, Min)	-	0	-
Clauses 6.1 and 6.2, Table 2 (xiii)(Dimensional change due to relaxation, percentage, Max: (a) Warpway (b) Weftway)	-	0	-
Clauses 6.1 and 6.2, Table 2 (xiv)(Water proofness at 30 cm water column height for 60 min)	-	0	-
Clauses 6.1 and 6.2, Table 2 (xv)(Water repellency (uncoated face), Spray rating, Min)	-	0	-
Clauses 6.1 and 6.2, Table 2 (xvii)(Resistance to accelerated ageing at 70 ± 1°C for 168 h in air circulating oven)	-	0	-
Clause 6.3, Table 3 (i)(Nature of fibre/filament)	-	0	-
Clause 6.3, Table 3 (ii)(Number of holes per square inch (Rectangular in shape))	-	0	-
Clause 6.3, Table 3 (iii)(Mass, g/sq. m)	-	0	-
Clause 6.4 Table 4 (v)(Breaking strength, N, Min (2.5 cm × full width fabric between grips))	-	0	-
Clause 6.4, Table 4 (vi)(Colour fastness to washing, Test C(3), Min: a) Change in colour b) Staining on adjacent fabric)	-	0	-
Clause 6.4, Table 4 (vii)(Colour fastness to light, Min)	-	0	-
Clause 6.4, Table 4 (vii)(pH value of aqueous extract (Cold method))	-	0	-
Clause 6.5, Table 5 (i)(Nature of fibre/filament)	-	0	-
Clause 6.5, Table 5 (i)(Colour fastness to washing, Test C(3), Min: a) Change in colour b) Staining on adjacent fabric)	-	0	-
Clause 6.5, Table 5 (i)(Colour fastness to light, Min)	-	0	-
Clause 6.5, Table 5 (i)(Dimensional change due to relaxation, percentage, Max: a) Warpway b) Weftway)	-	0	-
Clause 6.5, Table 5 (i)(pH value of aqueous extract (Cold method))	-	0	-
Clause 6.9, Table 6 (i)(Nature of material)	-	0	-
Clause 6.9, Table 6 (i)(Resistance to accelerated ageing)	-	0	-
6.9 - Table 6 - (iii)(Resistance to low temperature)	-	0	-
Clause 6.9, Table 6 (i)(Colour fastness to light, Min)	-	0	-
6.9 - Table 6 - (v)(Pull load)	-	0	-
Clause 4(STITCHING)	-	0	-
Clause 5(FREEDOM FROM DEFECT)	-	0	-
Clauses 6.1 and 6.2, Table 2 (i)(Nature of fibre/filament)	-	0	-
Clauses 6.1 and 6.2, Table 2 (iii)(Weave)	-	0	-
Clauses 6.1 and 6.2, Table 2 (iv)(End/dm)	-	0	-
Clauses 6.1 and 6.2, Table 2 (v)(Picks/dm)	-	0	-
Clauses 6.1 and 6.2, Table 2 (vi)(Mass, g/sq. m)	-	0	-
Clauses 6.1 and 6.2, Table 2 (vii)("Tearing strength, N, Min: (a) Warpway (b) Weftway")	-	0	-
Clauses 6.1 and 6.2, Table 2 (viii)(Abrasion resistance (Martindale), Using abradant ‘Emery paper No. 600’ at load of 200 g on uncoated surface)	-	0	-
Clauses 6.1 and 6.2, Table 2 (ix)("Colour fastness to washing, Test C (3), Min: (a) Change in colour (b) Staining on adjacent fabric")	-	0	-
Clauses 6.1 and 6.2, Table 2 (x)("Colour fastness to perspiration, Min: (a) Change in colour (b) Staining on adjacent fabric")	-	0	-
Clauses 6.1 and 6.2, Table 2 (xi)("Colour fastness to rubbing, Min: (a) Dry (b) Wet")	-	0	-
Clauses 6.1 and 6.2, Table 2 (xii)(Colour fastness to light, Min)	-	0	-
Clauses 6.1 and 6.2, Table 2 (xiii)(Dimensional change due to relaxation, percentage, Max: (a) Warpway (b) Weftway)	-	0	-
Clauses 6.1 and 6.2, Table 2 (xiv)(Water proofness at 30 cm water column height for 60 min)	-	0	-
Clauses 6.1 and 6.2, Table 2 (xv)(Water repellency (uncoated face), Spray rating, Min)	-	0	-
Clauses 6.1 and 6.2, Table 2 (xvii)(Resistance to accelerated ageing at 70 ± 1°C for 168 h in air circulating oven)	-	0	-
Clause 6.3, Table 3 (i)(Nature of fibre/filament)	-	0	-
Clause 6.3, Table 3 (ii)(Number of holes per square inch (Rectangular in shape))	-	0	-
Clause 6.3, Table 3 (iii)(Mass, g/sq. m)	-	0	-
Clause 6.4 Table 4 (v)(Breaking strength, N, Min (2.5 cm × full width fabric between grips))	-	0	-
Clause 6.4, Table 4 (vi)(Colour fastness to washing, Test C(3), Min: a) Change in colour b) Staining on adjacent fabric)	-	0	-
Clause 6.4, Table 4 (vii)(Colour fastness to light, Min)	-	0	-
Clause 6.4, Table 4 (vii)(pH value of aqueous extract (Cold method))	-	0	-
Clause 6.5, Table 5 (i)(Nature of fibre/filament)	-	0	-
Clause 6.5, Table 5 (i)(Colour fastness to washing, Test C(3), Min: a) Change in colour b) Staining on adjacent fabric)	-	0	-
Clause 6.5, Table 5 (i)(Colour fastness to light, Min)	-	0	-
Clause 6.5, Table 5 (i)(Dimensional change due to relaxation, percentage, Max: a) Warpway b) Weftway)	-	0	-
Clause 6.5, Table 5 (i)(pH value of aqueous extract (Cold method))	-	0	-
Clause 6.9, Table 6 (i)(Nature of material)	-	0	-
Clause 6.9, Table 6 (i)(Resistance to accelerated ageing)	-	0	-
6.9 - Table 6 - (iii)(Resistance to low temperature)	-	0	-
Clause 6.9, Table 6 (i)(Colour fastness to light, Min)	-	0	-
6.9 - Table 6 - (v)(Pull load)	-	0	-
Clauses 6.1 and 6.2, Table 2 (ii)(Nature of coating)	-	400	-
Clauses 6.1 and 6.2, Table 2 (xvi)(Separation of PU film)	-	200	-
Clause 6.3, Table 3 (iv)(Colour fastness to washing, Test C(3), Min: (a) Change in colour (b) Staining on adjacent fabric)	-	350	-
Clause 6.3, Table 3 (v)(Colour fastness to perspiration, Min: (a) Change in colour (b) Staining on adjacent fabric)	-	400	-
Clause 6.3, Table 3 (vi)(Colour fastness to light, Min)	-	1500	-
Clause 6.3, Table 3 (vii)(Dimensional change due to relaxation, percentage, Max: (a) Warpway (b) Weftway)	-	300	-
Clause 6.3, Table 3 (viii)(pH value of aqueous extract (Cold method))	-	300	-
Clause 6.4, Table 4 (i)(Nature of fibre/filament)	-	400	-
Clause 6.4 Table 4 (ii)(End/dm)	-	200	-
Clause 6.4, Table 4 (iii)(Picks/dm)	-	0	-
Clause 6.4, Table 4 (iv)(Mass per linear meter, g)	-	400.02	-

-
-

12258

Ahmedabad Textile Industry's Research Association (ATIRA), Ahmedabad

7173002

IS 16725 (2018)

Textiles - Tactical 3 points sling universal - Specification

22900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 3.2.2 & Table 2 (i)(Nature of filament)	-	400	-
Clause 3.2.2 & Table 2 (ii)(Width, mm)	-	150	-
Clause 3.2.2 & Table 2 (iii)(Mass per linear meter of tape, g)	-	400	-
Clause 3.2.2 & Table 2 (iv)(Breaking strength (full width × 20 cm), N, Min)	-	800	-
Clause 3.2.2 & Table 2 (v)(Colour fastness to light)	-	1500	-
Clause 3.2.2 & Table 2 (vi)(Colour fastness to rubbing: (a) Dry & (b) Wet)	-	200	-
Clause 3.2.2 & Table 2 (vii)(Colour fastness to washing C(3) (a) Change in colour)	-	350	-
Clause 3.2.2 & Table 2 (viii)(Colour fastness to washing C(3) (b) Staining on adjacent fabric)	-	0	-
Clause 3.2.2 & Table 2 (ix)(Dimensional change due to relaxation, both directions, percent, Max)	-	300	-
Clause 3.2.2 & Table 2 (x)(pH value of aqueous extract (Cold method))	-	300	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): (a) Nature of filament yarn)	-	400	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): ( b) End/dm, Min)	-	200	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): (c) Picks/dm, Min)	-	0	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): (d) Width, mm)	-	150	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): (e) Mass, g/sq. m)	-	400	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): (f) Colour fastness to washing C(3): (1) Change in colour)	-	350	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): (g) Colour fastness to rubbing: (1) Dry & (2) Wet)	-	200	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): (h) Colour fastness to light)	-	1500	-
Clause 3.2.3 & Table 4 (ii)(Bottom layer (Nylon Tape – 50 mm wide): (a) Nature of filament yarn)	-	400	-
Clause 3.2.3 & Table 4 (ii)(Bottom layer (Nylon Tape – 50 mm wide): (b) Width, mm)	-	150	-
Clause 3.2.3 & Table 4 (ii)(Bottom layer (Nylon Tape – 50 mm wide): (c) Mass per linear meter, g)	-	400	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): (f) Colour fastness to washing C(3): (2) Staining on adjacent fabric)	-	350	-
Clause 3.2.3 & Table 4 (ii)("Bottom layer (Nylon Tape – 50 mm wide): (e) Colour fastness to rubbing: 1) Dry 2) Wet ")	-	200	-
Clause 3.2.3 & Table 4 (ii)(Bottom layer (Nylon Tape – 50 mm wide): (f) Colour fastness to light)	-	1500	-
3.2.1 - Table 1 - (i)(Warp)	-	1100	-
3.2.3 - Table 3 - (ii)(Weft)	-	1100	-
3.2.1 - Table 1 - (iii)(Binding end)	-	1100	-
3.2.3 - Table 4 - (i) - (a)(Nature of filament yarn)	-	0	-
3.2.2 - Table 2 -(ii)(Width)	-	0	-
3.2.2 - Table 2 -(iii)(Mass per linear meter)	-	0	-
Clause 3.2.3 & Table 4 (ii)(Bottom layer (Nylon Tape – 50 mm wide): (d) Colour fastness to washing C(3): (1) Change in colour)	-	0	-
Clause 3.2.2 & Table 2 (i)(Nature of filament)	-	0	-
Clause 3.2.2 & Table 2 (ii)(Width, mm)	-	0	-
Clause 3.2.2 & Table 2 (iii)(Mass per linear meter of tape, g)	-	0	-
Clause 3.2.2 & Table 2 (iv)(Breaking strength (full width × 20 cm), N, Min)	-	0	-
Clause 3.2.2 & Table 2 (v)(Colour fastness to light)	-	0	-
Clause 3.2.2 & Table 2 (vi)(Colour fastness to rubbing: (a) Dry & (b) Wet)	-	0	-
Clause 3.2.2 & Table 2 (vii)(Colour fastness to washing C(3) (a) Change in colour)	-	0	-
Clause 3.2.2 & Table 2 (viii)(Colour fastness to washing C(3) (b) Staining on adjacent fabric)	-	0	-
Clause 3.2.2 & Table 2 (ix)(Dimensional change due to relaxation, both directions, percent, Max)	-	0	-
Clause 3.2.2 & Table 2 (x)(pH value of aqueous extract (Cold method))	-	0	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): (a) Nature of filament yarn)	-	0	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): ( b) End/dm, Min)	-	0	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): (c) Picks/dm, Min)	-	0	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): (d) Width, mm)	-	0	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): (e) Mass, g/sq. m)	-	0	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): (f) Colour fastness to washing C(3): (1) Change in colour)	-	0	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): (g) Colour fastness to rubbing: (1) Dry & (2) Wet)	-	0	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): (h) Colour fastness to light)	-	0	-
Clause 3.2.3 & Table 4 (ii)(Bottom layer (Nylon Tape – 50 mm wide): (a) Nature of filament yarn)	-	0	-
Clause 3.2.3 & Table 4 (ii)(Bottom layer (Nylon Tape – 50 mm wide): (b) Width, mm)	-	0	-
Clause 3.2.3 & Table 4 (ii)(Bottom layer (Nylon Tape – 50 mm wide): (c) Mass per linear meter, g)	-	0	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): (f) Colour fastness to washing C(3): (2) Staining on adjacent fabric)	-	0	-
Clause 3.2.3 & Table 4 (ii)("Bottom layer (Nylon Tape – 50 mm wide): (e) Colour fastness to rubbing: 1) Dry 2) Wet ")	-	0	-
Clause 3.2.3 & Table 4 (ii)(Bottom layer (Nylon Tape – 50 mm wide): (f) Colour fastness to light)	-	0	-
3.2.1 - Table 1 - (i)(Warp)	-	1100	-
3.2.3 - Table 3 - (ii)(Weft)	-	1100	-
3.2.1 - Table 1 - (iii)(Binding end)	-	1100	-
3.2.3 - Table 4 - (i) - (a)(Nature of filament yarn)	-	0	-
3.2.2 - Table 2 -(ii)(Width)	-	0	-
3.2.2 - Table 2 -(iii)(Mass per linear meter)	-	0	-
Clause 3.2.3 & Table 4 (ii)(Bottom layer (Nylon Tape – 50 mm wide): (d) Colour fastness to washing C(3): (1) Change in colour)	-	0	-
Clause 3.2.2 & Table 2 (i)(Nature of filament)	-	0	-
Clause 3.2.2 & Table 2 (ii)(Width, mm)	-	0	-
Clause 3.2.2 & Table 2 (iii)(Mass per linear meter of tape, g)	-	0	-
Clause 3.2.2 & Table 2 (iv)(Breaking strength (full width × 20 cm), N, Min)	-	0	-
Clause 3.2.2 & Table 2 (v)(Colour fastness to light)	-	0	-
Clause 3.2.2 & Table 2 (vi)(Colour fastness to rubbing: (a) Dry & (b) Wet)	-	0	-
Clause 3.2.2 & Table 2 (vii)(Colour fastness to washing C(3) (a) Change in colour)	-	0	-
Clause 3.2.2 & Table 2 (viii)(Colour fastness to washing C(3) (b) Staining on adjacent fabric)	-	0	-
Clause 3.2.2 & Table 2 (ix)(Dimensional change due to relaxation, both directions, percent, Max)	-	0	-
Clause 3.2.2 & Table 2 (x)(pH value of aqueous extract (Cold method))	-	0	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): (a) Nature of filament yarn)	-	0	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): ( b) End/dm, Min)	-	0	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): (c) Picks/dm, Min)	-	0	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): (d) Width, mm)	-	0	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): (e) Mass, g/sq. m)	-	0	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): (f) Colour fastness to washing C(3): (1) Change in colour)	-	0	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): (g) Colour fastness to rubbing: (1) Dry & (2) Wet)	-	0	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): (h) Colour fastness to light)	-	0	-
Clause 3.2.3 & Table 4 (ii)(Bottom layer (Nylon Tape – 50 mm wide): (a) Nature of filament yarn)	-	0	-
Clause 3.2.3 & Table 4 (ii)(Bottom layer (Nylon Tape – 50 mm wide): (b) Width, mm)	-	0	-
Clause 3.2.3 & Table 4 (ii)(Bottom layer (Nylon Tape – 50 mm wide): (c) Mass per linear meter, g)	-	0	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): (f) Colour fastness to washing C(3): (2) Staining on adjacent fabric)	-	0	-
Clause 3.2.3 & Table 4 (ii)("Bottom layer (Nylon Tape – 50 mm wide): (e) Colour fastness to rubbing: 1) Dry 2) Wet ")	-	0	-
Clause 3.2.3 & Table 4 (ii)(Bottom layer (Nylon Tape – 50 mm wide): (f) Colour fastness to light)	-	0	-
3.2.1 - Table 1 - (i)(Warp)	-	0	-
3.2.3 - Table 3 - (ii)(Weft)	-	0	-
3.2.1 - Table 1 - (iii)(Binding end)	-	0	-
3.2.2 - Table 2 -(ii)(Width)	-	0	-
3.2.2 - Table 2 -(iii)(Mass per linear meter)	-	0	-
Clause 3.2.3 & Table 4 (ii)(Bottom layer (Nylon Tape – 50 mm wide): (d) Colour fastness to washing C(3): (1) Change in colour)	-	0	-
Clause 4(STITCHING)	-	5500	-
5(Workmanship and finish)	-	200	-

-
-

12259

Ahmedabad Textile Industry's Research Association (ATIRA), Ahmedabad

7173002

IS 16655 (2017)

Textiles - Protective clothing for use in welding and allied processes

22000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.2 & Table 3(Tensile strength)	-	800	-
6.3 & Table 3(Tear strength)	-	600	-
6.4 & Table 3(Burst strength of knitted materials and seams)	-	1600	-
6.5 & Table 3(Seam strength)	-	950	-
6.6 & Table 3(Dimensional change of textile materials)	-	300	-
6.7 & Table 3(Limited flame spread)	-	0	-
6.9 & Table 3(Heat transfer (radiation))	-	6000	-
6.10 & Table 3(Electrical resistance)	-	1000	-
6.2 & Table 3(Tensile strength)	-	0	-
6.3 & Table 3(Tear strength)	-	0	-
6.4 & Table 3(Burst strength of knitted materials and seams)	-	0	-
6.5 & Table 3(Seam strength)	-	0	-
6.6 & Table 3(Dimensional change of textile materials)	-	0	-
6.7 & Table 3(Limited flame spread)	-	0	-
6.9 & Table 3(Heat transfer (radiation))	-	0	-
6.10 & Table 3(Electrical resistance)	-	0	-
6.2 & Table 3(Tensile strength)	-	0	-
6.3 & Table 3(Tear strength)	-	0	-
6.4 & Table 3(Burst strength of knitted materials and seams)	-	0	-
6.5 & Table 3(Seam strength)	-	0	-
6.6 & Table 3(Dimensional change of textile materials)	-	0	-
6.7 & Table 3(Limited flame spread)	-	0	-
6.9 & Table 3(Heat transfer (radiation))	-	0	-
6.10 & Table 3(Electrical resistance)	-	0	-
4.1(General)	-	200	-
4.2(Protective clothing)	-	200	-
4.3(Size designation and fit)	-	1000	-
4.5(Pockets and flap closures)	-	600	-
4.6(Closures and seams)	-	400	-
4.7(Hardware)	-	200	-
5.2("Pre-treatment/cleaning: 5 wash cycles as per ISO 6330 procedure 2A followed by Tumble dry delicate (A wash cycle is one wash and one drying). ")	-	1500	-
6.7.2("Limited Flame Spread (Face ignition) (Before and after pre-treatment) ")	-	3000	-
6.7.3(Limited Flame Spread (Edge ignition) (Before and after pre-treatment))	-	3000	-
6.11 & Table 3(Fat content of leather)	-	650	-

-
-

12260

Ahmedabad Textile Industry's Research Association (ATIRA), Ahmedabad

7173002

IS 15748 (2022)

Protective clothing - Clothing to protect against heat and flame - Minimum performance requirements (first revision)

34550 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.2.1(Heat resistance)	-	1000	-
6.2.2(Heat resistance)	-	0	-
6.3.2.1(Limited flame spread)	-	5700	-
6.3.3.1(Limited flame spread)	-	3000	-
6.4(Dimensional change of textile materials)	-	400	-
6.5.1(Tensile strength)	-	800	-
6.5.2(Tear strength)	-	600	-
6.5.3(Burst strength for knitted materials and seams)	-	600	-
6.5.4(Seam strength)	-	950	-
7.2(Convective heat (code letter B))	-	2500	-
7.3(Radiant heat (code letter C))	-	6000	-
7.6(Contact heat (code letter F))	-	2000	-
6.2.1(Heat resistance)	-	0	-
6.3.2.1(Limited flame spread)	-	0	-
6.4(Dimensional change of textile materials)	-	0	-
6.5.1(Tensile strength)	-	0	-
6.5.2(Tear strength)	-	0	-
6.5.3(Burst strength for knitted materials and seams)	-	0	-
6.5.4(Seam strength)	-	0	-
7.2(Convective heat (code letter B))	-	0	-
7.3(Radiant heat (code letter C))	-	0	-
7.6(Contact heat (code letter F))	-	0	-
7.4(Molten aluminium splash (code letter D))	-	6000	-
7.5(Molten iron splash (code letter E))	-	5000	-
6.2.1(Heat resistance)	-	0	-
6.3.2.1(Limited flame spread)	-	0	-
6.4(Dimensional change of textile materials)	-	0	-
6.5.1(Tensile strength)	-	0	-
6.5.2(Tear strength)	-	0	-
6.5.3(Burst strength for knitted materials and seams)	-	0	-
6.5.4(Seam strength)	-	0	-
7.2(Convective heat (code letter B))	-	0	-
7.3(Radiant heat (code letter C))	-	0	-
7.6(Contact heat (code letter F))	-	0	-
7.4(Molten aluminium splash (code letter D))	-	0	-
7.5(Molten iron splash (code letter E))	-	0	-
6.2.1(Heat resistance)	-	0	-
6.3.2.1(Limited flame spread)	-	0	-
6.4(Dimensional change of textile materials)	-	0	-
6.5.1(Tensile strength)	-	0	-
6.5.2(Tear strength)	-	0	-
6.5.3(Burst strength for knitted materials and seams)	-	0	-
6.5.4(Seam strength)	-	0	-
7.2(Convective heat (code letter B))	-	0	-
7.3(Radiant heat (code letter C))	-	0	-
7.6(Contact heat (code letter F))	-	0	-
7.4(Molten aluminium splash (code letter D))	-	0	-
7.5(Molten iron splash (code letter E))	-	0	-
6.2.2(Heat resistance)	-	0	-
6.3.3.1(Limited flame spread)	-	0	-

-
Remark: Additional INR 1000 for testing Heat Resistance accessories, Retro reflective Tape & Zipper/Velcro, INR 1500 accessories for testing Limited Flame Spread. Retroreflective Tape, Seam & Zipper/Velcro

12261

Ahmedabad Textile Industry's Research Association (ATIRA), Ahmedabad

7173002

IS 16874 (2018)

Textiles - Protective gloves for firefighters - Specification

79400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.4(Glove Sizing)	-	200	-
4.5(pH Value)	-	300	-
4.6(Leather Chromium VI Content)	-	650	-
6.2.1(Flame Resistance)	-	9000	Charges is where palm and back of palm are different
6.2.2(Heat Transfer (Flame Exposure))	-	10000	Charges is where palm and back of palm are different
6.2.3(Heat Transfer (Radiant Exposure))	-	24000	Charges is where palm and back of palm are different
6.2.4(Heat Transfer (Conductive Exposure))	-	12000	Charges is where palm and back of palm are different
6.2.5(Heat Resistance)	-	4000	-
6.3.1(Abrasion Resistance)	-	2000	-
6.3.2(Cut Resistance)	-	6000	Charges is where palm and back of palm are different
6.3.3(Tear Resistance)	-	1200	Charges is where palm and back of palm are different
6.3.4(Puncture Resistance)	-	4000	Charges is where palm and back of palm are different
6.3.5(Seam Breaking Strength)	-	950	-
6.4.1(Water Penetration Resistance)	-	1200	-
6.4.2(Liquid Penetration Resistance)	-	1000	-
6.5.1(Dexterity)	-	200	-
4.4(Glove Sizing)	-	0	-
4.5(pH Value)	-	0	-
4.6(Leather Chromium VI Content)	-	0	-
6.2.1(Flame Resistance)	-	0	-
6.2.2(Heat Transfer (Flame Exposure))	-	0	-
6.2.3(Heat Transfer (Radiant Exposure))	-	0	-
6.2.4(Heat Transfer (Conductive Exposure))	-	0	-
6.2.5(Heat Resistance)	-	0	-
6.3.1(Abrasion Resistance)	-	0	-
6.3.2(Cut Resistance)	-	0	-
6.3.3(Tear Resistance)	-	0	-
6.3.4(Puncture Resistance)	-	0	-
6.3.5(Seam Breaking Strength)	-	0	-
6.4.1(Water Penetration Resistance)	-	0	-
6.4.2(Liquid Penetration Resistance)	-	0	-
6.5.1(Dexterity)	-	0	-
4.4(Glove Sizing)	-	0	-
4.5(pH Value)	-	0	-
4.6(Leather Chromium VI Content)	-	0	-
6.2.1(Flame Resistance)	-	0	-
6.2.2(Heat Transfer (Flame Exposure))	-	0	-
6.2.3(Heat Transfer (Radiant Exposure))	-	0	-
6.2.4(Heat Transfer (Conductive Exposure))	-	0	-
6.2.5(Heat Resistance)	-	0	-
6.3.1(Abrasion Resistance)	-	0	-
6.3.2(Cut Resistance)	-	0	-
6.3.3(Tear Resistance)	-	0	-
6.3.4(Puncture Resistance)	-	0	-
6.3.5(Seam Breaking Strength)	-	0	-
6.4.1(Water Penetration Resistance)	-	0	-
6.4.2(Liquid Penetration Resistance)	-	0	-
6.5.1(Dexterity)	-	0	-
4.1(Component Assembly)	-	200	-
4.2(Glove Body Length)	-	200	-
4.3(Wristlet or Cuff)	-	400	-
6.5.2(Grip)	-	200	-
6.5.3(Donning)	-	200	-
5.4.1("Pre-treatments (a) Washing Pre-treatment (Five Washings) [IS 15370-2A(60±3)ºC followed by tumble dry delicate (A wash cycle is one wash and one drying) ")	-	1500	-
5.4.2(Pre-treatments (b) Dry Conditioning)	-	0	-
5.4.3(Pre-treatments (c) Wet Conditioning)	-	0	-

-
-

12262

Ahmedabad Textile Industry's Research Association (ATIRA), Ahmedabad

7173002

IS 16890 (2018)

Textiles - Protective clothing for firefighters - Specification

33800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6.11(Water-penetration Resistance)	-	600	-
Cl.6.10(Liquid-chemical Penetration Resistance)	-	1000	-
Cl.6.9(Cleaning-shrinkage Resistance)	-	300	-
Cl.6.8(Surface Wetting)	-	250	-
Cl.6.7(Tear Strength)	-	600	-
Cl.6.6(Tensile Strength)	-	800	-
Cl.6.5(Heat Resistance)	-	1000	-
Cl.6.4(Residual Strength of Material when Exposed to Radiant Heat)	-	6600	-
Cl.6.2(Heat Transfer (Flame Exposure))	-	3000	-
Cl.6.1(Flame Resistance)	-	3000	-
Cl.5.4(Pre-treatment)	-	1250	-
Cl.6.12(Water-vapour Resistance)	-	3000	-
Cl.6.12(Water-vapour Resistance)	-	0	-
Cl.6.11(Water-penetration Resistance)	-	0	-
Cl.6.10(Liquid-chemical Penetration Resistance)	-	0	-
Cl.6.9(Cleaning-shrinkage Resistance)	-	0	-
Cl.6.8(Surface Wetting)	-	0	-
Cl.6.7(Tear Strength)	-	0	-
Cl.6.6(Tensile Strength)	-	0	-
Cl.6.5(Heat Resistance)	-	0	-
Cl.6.4(Residual Strength of Material when Exposed to Radiant Heat)	-	0	-
Cl.6.2(Heat Transfer (Flame Exposure))	-	0	-
Cl.6.1(Flame Resistance)	-	0	-
Cl.5.4(Pre-treatment)	-	0	-
Cl.6.12(Water-vapour Resistance)	-	0	-
Cl.6.11(Water-penetration Resistance)	-	0	-
Cl.6.10(Liquid-chemical Penetration Resistance)	-	0	-
Cl.6.9(Cleaning-shrinkage Resistance)	-	0	-
Cl.6.8(Surface Wetting)	-	0	-
Cl.6.7(Tear Strength)	-	0	-
Cl.6.6(Tensile Strength)	-	0	-
Cl.6.5(Heat Resistance)	-	0	-
Cl.6.4(Residual Strength of Material when Exposed to Radiant Heat)	-	0	-
Cl.6.2(Heat Transfer (Flame Exposure))	-	0	-
Cl.6.1(Flame Resistance)	-	0	-
Cl.5.4(Pre-treatment)	-	0	-
Cl.6.3(Heat Transfer (Radiant Exposure))	-	0	-
Cl.6.12(Water-vapour Resistance)	-	0	-
Cl.6.11(Water-penetration Resistance)	-	0	-
Cl.6.10(Liquid-chemical Penetration Resistance)	-	0	-
Cl.6.9(Cleaning-shrinkage Resistance)	-	0	-
Cl.6.8(Surface Wetting)	-	0	-
Cl.6.7(Tear Strength)	-	0	-
Cl.6.6(Tensile Strength)	-	0	-
Cl.6.5(Heat Resistance)	-	0	-
Cl.6.4(Residual Strength of Material when Exposed to Radiant Heat)	-	0	-
Cl.6.3(Heat Transfer (Radiant Exposure))	-	0	-
Cl.6.2(Heat Transfer (Flame Exposure))	-	0	-
Cl.6.1(Flame Resistance)	-	0	-
Cl.5.4(Pre-treatment)	-	0	-
Cl.4.2.7 Annex-c(Requirements for visibility)	-	4000	-
Cl.4.12(Height )	-	150	-
Cl.4.12(Chest or Bust Girth )	-	150	-
Cl.4.12(Size Designations)	-	200	-
Cl.4.2.8(Sleeve Ends)	-	200	-
Cl.4.2.6(Closure Systems)	-	3000	-
Cl.4.2.5(Hardware)	-	2200	-
Cl.4.2.4(Seams)	-	600	-
Cl.4.2.3(Multilayer Clothing Assemblies)	-	1200	-
Cl.4.2.2(Restriction of Movement)	-	500	-
Cl.4.2.1(Configuration)	-	200	-

-
-

12263

Ahmedabad Textile Industry's Research Association (ATIRA), Ahmedabad

7173002

IS 15741 (2007)

Textiles - Resistance to ignition of curtains and drapes - Specification

78000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Ignitability)	-	1500	-
Cl-4.2(Durability of Fire Retardant Property)	-	16500	-
Cl-4.3(Toxicity Index)	-	10000	-
Cl-4.4(Visibility Due to Smoke Released on Combustion)	-	50000	-
Cl-4.1(Ignitability)	-	0	-
Cl-4.2(Durability of Fire Retardant Property)	-	0	-
Cl-4.3(Toxicity Index)	-	0	-
Cl-4.4(Visibility Due to Smoke Released on Combustion)	-	0	-
Cl-4.1(Ignitability)	-	0	-
Cl-4.2(Durability of Fire Retardant Property)	-	0	-
Cl-4.3(Toxicity Index)	-	0	-
Cl-4.4(Visibility Due to Smoke Released on Combustion)	-	0	-
Cl-4.1(Ignitability)	-	0	-
Cl-4.2(Durability of Fire Retardant Property)	-	0	-
Cl-4.3(Toxicity Index)	-	0	-
Cl-4.4(Visibility Due to Smoke Released on Combustion)	-	0	-

-
-

12264

Ahmedabad Textile Industry's Research Association (ATIRA), Ahmedabad

7173002

IS 17483 : Part 2 (2020)

Geosynthetics - Geocells - Specification Part 2 Slope Erosion Protection Application

152560 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No. 6.2, Table No. 1 (i)(Density, g/cm3)	-	500	-
Clause No. 6.2, Table No. 1 (iv)(Carbon black content, percent)	-	500	-
Clause No. 6.2, Table No. 1 (v)(Post texturing strip/cell wall thickness at a pressure of 2 ± 0.01 kPa, mm)	-	400	-
Clause No. 6.2, Table No. 1 (vi)(Seam peel-strength per 25 mm of cell depth, N)	-	1200	-
Clause No. 6.2, Table No. 1 (vii)(Seam weld hang strength for 100 mm of seam weld under constantdead weight of 72.5 kg for 7 days at 54 ± 2 °C)	-	15440	-
Clause No. 6.2, Table No. 1 (viii)(Resistance to oxidation, Retained tensile strength, percent)	-	76320	-
Clause No. 6.2, Table No. 1 (ix)(Retention of breaking strength after UV exposure of 500 h)	-	41200	-
Clause No. 6.2, Table No. 1 (x)(Friction efficiency, percent)	-	5000	-
Clause No. 6.2, Table No. 1 (xi)(Standard oxidative induction time, minutes)	-	10000	-
Clause No. 6.2, Table No. 1 (i)(Density, g/cm3)	-	0	-
Clause No. 6.2, Table No. 1 (iv)(Carbon black content, percent)	-	0	-
Clause No. 6.2, Table No. 1 (v)(Post texturing strip/cell wall thickness at a pressure of 2 ± 0.01 kPa, mm)	-	0	-
Clause No. 6.2, Table No. 1 (vi)(Seam peel-strength per 25 mm of cell depth, N)	-	0	-
Clause No. 6.2, Table No. 1 (vii)(Seam weld hang strength for 100 mm of seam weld under constantdead weight of 72.5 kg for 7 days at 54 ± 2 °C)	-	0	-
Clause No. 6.2, Table No. 1 (viii)(Resistance to oxidation, Retained tensile strength, percent)	-	0	-
Clause No. 6.2, Table No. 1 (ix)(Retention of breaking strength after UV exposure of 500 h)	-	0	-
Clause No. 6.2, Table No. 1 (x)(Friction efficiency, percent)	-	0	-
Clause No. 6.2, Table No. 1 (xi)(Standard oxidative induction time, minutes)	-	0	-
Clause No. 6.2, Table No. 1 (i)(Density, g/cm3)	-	0	-
Clause No. 6.2, Table No. 1 (iv)(Carbon black content, percent)	-	0	-
Clause No. 6.2, Table No. 1 (v)(Post texturing strip/cell wall thickness at a pressure of 2 ± 0.01 kPa, mm)	-	0	-
Clause No. 6.2, Table No. 1 (vi)(Seam peel-strength per 25 mm of cell depth, N)	-	0	-
Clause No. 6.2, Table No. 1 (vii)(Seam weld hang strength for 100 mm of seam weld under constantdead weight of 72.5 kg for 7 days at 54 ± 2 °C)	-	0	-
Clause No. 6.2, Table No. 1 (viii)(Resistance to oxidation, Retained tensile strength, percent)	-	0	-
Clause No. 6.2, Table No. 1 (ix)(Retention of breaking strength after UV exposure of 500 h)	-	0	-
Clause No. 6.2, Table No. 1 (x)(Friction efficiency, percent)	-	0	-
Clause No. 6.2, Table No. 1 (xi)(Standard oxidative induction time, minutes)	-	0	-
Clause No. 5.2(Dimensions)	-	600	-
Clause No. 5.3(Surface density of indentation)	-	500	-
Clause No. 5.4(Perforations)	-	600	-
Clause No. 5.5(Seam Weld)	-	300	-
Clause No. 6.2, Table No. 1 (i)(Density, g/cm3)	-	0	-
Clause No. 6.2, Table No. 1 (iv)(Carbon black content, percent)	-	0	-
Clause No. 6.2, Table No. 1 (v)(Post texturing strip/cell wall thickness at a pressure of 2 ± 0.01 kPa, mm)	-	0	-
Clause No. 6.2, Table No. 1 (vi)(Seam peel-strength per 25 mm of cell depth, N)	-	0	-
Clause No. 6.2, Table No. 1 (vii)(Seam weld hang strength for 100 mm of seam weld under constantdead weight of 72.5 kg for 7 days at 54 ± 2 °C)	-	0	-
Clause No. 6.2, Table No. 1 (viii)(Resistance to oxidation, Retained tensile strength, percent)	-	0	-
Clause No. 6.2, Table No. 1 (ix)(Retention of breaking strength after UV exposure of 500 h)	-	0	-
Clause No. 6.2, Table No. 1 (x)(Friction efficiency, percent)	-	0	-
Clause No. 6.2, Table No. 1 (xi)(Standard oxidative induction time, minutes)	-	0	-
Clause No. 5.2(Dimensions)	-	0	-
Clause No. 5.3(Surface density of indentation)	-	0	-
Clause No. 5.4(Perforations)	-	0	-
Clause No. 5.5(Seam Weld)	-	0	-

-
-

12265

Ahmedabad Textile Industry's Research Association (ATIRA), Ahmedabad

7173002

IS 17483 : Part 1 (2020)

Geosynthetics - Geocells - Specification Part 1 Load Bearing Application

153060 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No. 6.2, Table No. 1 (i)(Density, g/cm3)	-	500	-
Clause No. 6.2, Table No. 1 (iv)(Carbon black content, percent)	-	500	-
Clause No. 6.2, Table No. 1 (v)(Post texturing strip/cell wall thickness at a pressure of 2 ± 0.01 kPa, mm)	-	400	-
Clause No. 6.2, Table No. 1 (vi)(Seam peel-strength per 25 mm of cell depth, N)	-	1200	-
Clause No. 6.2, Table No. 1 (vii)(Seam weld hang strength for 100 mm of seam weld under constantdead weight of 72.5 kg for 7 days at 54 ± 2 °C)	-	15440	-
Clause No. 6.2, Table No. 1 (viii)(Resistance to oxidation, Retained tensile strength, percent)	-	76320	-
Clause No. 6.2, Table No. 1 (ix)(Retention of breaking strength after UV exposure of 500 h)	-	41200	-
Clause No. 6.2, Table No. 1 (x)(Friction efficiency, percent)	-	5000	-
Clause No. 6.2, Table No. 1 (xi)(Standard oxidative induction time, minutes)	-	10000	-
Clause No. 6.2, Table No. 1 (i)(Density, g/cm3)	-	0	-
Clause No. 6.2, Table No. 1 (iv)(Carbon black content, percent)	-	0	-
Clause No. 6.2, Table No. 1 (v)(Post texturing strip/cell wall thickness at a pressure of 2 ± 0.01 kPa, mm)	-	0	-
Clause No. 6.2, Table No. 1 (vi)(Seam peel-strength per 25 mm of cell depth, N)	-	0	-
Clause No. 6.2, Table No. 1 (vii)(Seam weld hang strength for 100 mm of seam weld under constantdead weight of 72.5 kg for 7 days at 54 ± 2 °C)	-	0	-
Clause No. 6.2, Table No. 1 (viii)(Resistance to oxidation, Retained tensile strength, percent)	-	0	-
Clause No. 6.2, Table No. 1 (ix)(Retention of breaking strength after UV exposure of 500 h)	-	0	-
Clause No. 6.2, Table No. 1 (x)(Friction efficiency, percent)	-	0	-
Clause No. 6.2, Table No. 1 (xi)(Standard oxidative induction time, minutes)	-	0	-
1(Density- IS 13360 (part-3) sec-10)	-	0	-
CL 5.2(Cell depth, Pocket size, mm)	-	600	-
Clause No. 5.3(Asperity height)	-	300	-
Clause No. 5.3(Surface density of indentation)	-	500	-
Clause No. 5.4(Perforations)	-	600	-
Clause No. 5.5(Seam Weld)	-	300	-
1(Density- IS 13360 (part-3) sec-10)	-	0	-
Clause No. 6.2, Table No. 1 (iv)(Carbon black content, percent)	-	0	-
Clause No. 6.2, Table No. 1 (v)(Post texturing strip/cell wall thickness at a pressure of 2 ± 0.01 kPa, mm)	-	0	-
Clause No. 6.2, Table No. 1 (vi)(Seam peel-strength per 25 mm of cell depth, N)	-	0	-
Clause No. 6.2, Table No. 1 (vii)(Seam weld hang strength for 100 mm of seam weld under constantdead weight of 72.5 kg for 7 days at 54 ± 2 °C)	-	0	-
Clause No. 6.2, Table No. 1 (viii)(Resistance to oxidation, Retained tensile strength, percent)	-	0	-
Clause No. 6.2, Table No. 1 (ix)(Retention of breaking strength after UV exposure of 500 h)	-	0	-
Clause No. 6.2, Table No. 1 (x)(Friction efficiency, percent)	-	0	-
Clause No. 6.2, Table No. 1 (xi)(Standard oxidative induction time, minutes)	-	0	-
CL 5.2(Cell depth, Pocket size, mm)	-	0	-
Clause No. 5.3(Asperity height)	-	0	-
Clause No. 5.3(Surface density of indentation)	-	0	-
Clause No. 5.4(Perforations)	-	0	-
Clause No. 5.5(Seam Weld)	-	0	-

-
-

12266

Ahmedabad Textile Industry's Research Association (ATIRA), Ahmedabad

7173002

IS 17374 (2020)

Geosynthetics – Reinforced HDPE membrane for effluents and chemical resistance lining – Specification

329480 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No. 5.3, Table No. 1, (i)(Thickness (mm))	-	400	-
Clause No. 5.3, Table No. 1, (ii)(Mass (g/m2))	-	400	-
Clause No. 5.3, Table No. 1, (iii)(Dimensions (length and width))	-	600	-
Clause No. 3.1, Table No. 1, (iv)(Carbon black content, percent)	-	500	-
Clause No. 5.3, Table No. 1, (vi)(Breaking load on 20 cm × 10 cm strip before UV exposure, N)	-	800	-
Clause No. 5.3, Table No. 1, (vii)(Strain at maximum load, percent)	-	0	-
Clause No. 5.3, Table No. 1, (viii)(Retention of breaking load on 20 cm × 10 cm strip after UV exposure of 144 h)	-	12320	-
Clause No. 5.3, Table No. 1, (x)(Tear resistance, N)	-	800	-
Clause No. 5.3, Table No. 1, (xi)(Puncture resistance, N)	-	1200	-
Clause No. 5.3, Table No. 1, (xii)(Bursting strength (Ball burst), N/cm2)	-	800	-
Clause No. 5.3, Table No. 1, (xiii)(Seam strength before UV exposure, N/mm)	-	950	-
Clause No. 5.3, Table No. 1, (xiv)(Seam strength after UV exposure of 144 h, N/mm)	-	12470	-
Clause No. 5.3, Table No. 1, (xvii)(Low temperature crack resistance at minus 30 °C ± 1°C)	-	1000	-
Clause No. 5.3, Table No. 1, (xviii)(Oxidative induction time (OIT), minutes, (a) Standard OIT or (b) High Pressure OIT)	-	10000	-
Clause No. 5.3, Table No. 1, (xix)(Oven ageing at 85°C, Retention of oxidative induction time (OIT) after 90 days, percent, (a) Standard OIT or (b) High Pressure OIT)	-	128800	-
Clause No. 5.3, Table No. 1, (xxii)(Ash content, percent)	-	500	-
Clause No. 5.4, Table No. 2, (i)(Change in weight, percent)	-	149440	-
Clause No. 5.4, Table No. 2, (ii)(Change in volume, percent)	-	1600	-
Clause No. 5.4, Table No. 2, (iii)(Visual observations)	-	400	-
Clause No. 5.4, Table No. 2, (iv)(Change in tensile strength, percent)	-	1600	-
Clause No. 5.4, Table No. 2, (v)(Change in elongation, percent)	-	0	-
Clause No. 5.4, Table No. 2, (vi)(Change in 2 percent secant modulus, percent)	-	0	-
Clause No. 5.4, Table No. 2, (vii)(Change in seam strength, percent)	-	1900	-
Clause No. 5.3, Table No. 1, (ix)(Impact failure load, at 1524 mm drop, Min gram force at 50 percent failure)	-	3000	-
Clause No. 5.3, Table No. 1, (i)(Thickness (mm))	-	0	-
Clause No. 5.3, Table No. 1, (ii)(Mass (g/m2))	-	0	-
Clause No. 5.3, Table No. 1, (iii)(Dimensions (length and width))	-	0	-
Clause No. 3.1, Table No. 1, (iv)(Carbon black content, percent)	-	0	-
Clause No. 5.3, Table No. 1, (vi)(Breaking load on 20 cm × 10 cm strip before UV exposure, N)	-	0	-
Clause No. 5.3, Table No. 1, (vii)(Strain at maximum load, percent)	-	0	-
Clause No. 5.3, Table No. 1, (viii)(Retention of breaking load on 20 cm × 10 cm strip after UV exposure of 144 h)	-	0	-
Clause No. 5.3, Table No. 1, (x)(Tear resistance, N)	-	0	-
Clause No. 5.3, Table No. 1, (xi)(Puncture resistance, N)	-	0	-
Clause No. 5.3, Table No. 1, (xii)(Bursting strength (Ball burst), N/cm2)	-	0	-
Clause No. 5.3, Table No. 1, (xiii)(Seam strength before UV exposure, N/mm)	-	0	-
Clause No. 5.3, Table No. 1, (xiv)(Seam strength after UV exposure of 144 h, N/mm)	-	0	-
Clause No. 5.3, Table No. 1, (xvii)(Low temperature crack resistance at minus 30 °C ± 1°C)	-	0	-
Clause No. 5.3, Table No. 1, (xviii)(Oxidative induction time (OIT), minutes, (a) Standard OIT or (b) High Pressure OIT)	-	0	-
Clause No. 5.3, Table No. 1, (xix)(Oven ageing at 85°C, Retention of oxidative induction time (OIT) after 90 days, percent, (a) Standard OIT or (b) High Pressure OIT)	-	0	-
Clause No. 5.3, Table No. 1, (xxii)(Ash content, percent)	-	0	-
Clause No. 5.4, Table No. 2, (i)(Change in weight, percent)	-	0	-
Clause No. 5.4, Table No. 2, (ii)(Change in volume, percent)	-	0	-
Clause No. 5.4, Table No. 2, (iii)(Visual observations)	-	0	-
Clause No. 5.4, Table No. 2, (iv)(Change in tensile strength, percent)	-	0	-
Clause No. 5.4, Table No. 2, (v)(Change in elongation, percent)	-	0	-
Clause No. 5.4, Table No. 2, (vi)(Change in 2 percent secant modulus, percent)	-	0	-
Clause No. 5.4, Table No. 2, (vii)(Change in seam strength, percent)	-	0	-
Clause No. 5.3, Table No. 1, (ix)(Impact failure load, at 1524 mm drop, Min gram force at 50 percent failure)	-	0	-
Clause No. 5.3, Table No. 1, (i)(Thickness (mm))	-	0	-
Clause No. 5.3, Table No. 1, (ii)(Mass (g/m2))	-	0	-
Clause No. 5.3, Table No. 1, (iii)(Dimensions (length and width))	-	0	-
Clause No. 3.1, Table No. 1, (iv)(Carbon black content, percent)	-	0	-
Clause No. 5.3, Table No. 1, (vi)(Breaking load on 20 cm × 10 cm strip before UV exposure, N)	-	0	-
Clause No. 5.3, Table No. 1, (vii)(Strain at maximum load, percent)	-	0	-
Clause No. 5.3, Table No. 1, (viii)(Retention of breaking load on 20 cm × 10 cm strip after UV exposure of 144 h)	-	0	-
Clause No. 5.3, Table No. 1, (x)(Tear resistance, N)	-	0	-
Clause No. 5.3, Table No. 1, (xi)(Puncture resistance, N)	-	0	-
Clause No. 5.3, Table No. 1, (xii)(Bursting strength (Ball burst), N/cm2)	-	0	-
Clause No. 5.3, Table No. 1, (xiii)(Seam strength before UV exposure, N/mm)	-	0	-
Clause No. 5.3, Table No. 1, (xiv)(Seam strength after UV exposure of 144 h, N/mm)	-	0	-
Clause No. 5.3, Table No. 1, (xvii)(Low temperature crack resistance at minus 30 °C ± 1°C)	-	0	-
Clause No. 5.3, Table No. 1, (xviii)(Oxidative induction time (OIT), minutes, (a) Standard OIT or (b) High Pressure OIT)	-	0	-
Clause No. 5.3, Table No. 1, (xix)(Oven ageing at 85°C, Retention of oxidative induction time (OIT) after 90 days, percent, (a) Standard OIT or (b) High Pressure OIT)	-	0	-
Clause No. 5.3, Table No. 1, (xxii)(Ash content, percent)	-	0	-
Clause No. 5.4, Table No. 2, (i)(Change in weight, percent)	-	0	-
Clause No. 5.4, Table No. 2, (ii)(Change in volume, percent)	-	0	-
Clause No. 5.4, Table No. 2, (iii)(Visual observations)	-	0	-
Clause No. 5.4, Table No. 2, (iv)(Change in tensile strength, percent)	-	0	-
Clause No. 5.4, Table No. 2, (v)(Change in elongation, percent)	-	0	-
Clause No. 5.4, Table No. 2, (vi)(Change in 2 percent secant modulus, percent)	-	0	-
Clause No. 5.4, Table No. 2, (vii)(Change in seam strength, percent)	-	0	-
Clause No. 5.3, Table No. 1, (ix)(Impact failure load, at 1524 mm drop, Min gram force at 50 percent failure)	-	0	-

-
-

12267

Ahmedabad Textile Industry's Research Association (ATIRA), Ahmedabad

7173002

IS 16090 (2013)

Geo-synthetics – Geo-textiles used as protection (or cushioning) materials – Specification

45400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.4, Table 1, (i)(Mass per unit area, g/m2)	-	400	-
4.4, Table 1, (ii)(Tensile strength, kN/m)	-	1500	-
4.4, Table 1, (iii)(Trapezoidal tear strength, kN)	-	800	-
4.5, Table 1, (iv)(CBR puncture resistance, kN)	-	1200	-
4.6, Table 1, (v)(Maximum UV resistance (after 500 h exposure), percent)	-	41500	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class I(Mass per unit area, g/m2)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class I(Tensile strength, kN/m)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class I(Trapezoidal tear strength, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class I(CBR puncture resistance, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class I(Maximum UV resistance (after 500 h exposure), percent)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class II(Mass per unit area, g/m2)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class II(Tensile strength, kN/m)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class II(Trapezoidal tear strength, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class II(CBR puncture resistance, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class II(Maximum UV resistance (after 500 h exposure), percent)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class III(Mass per unit area, g/m2)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class III(Tensile strength, kN/m)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class III(Trapezoidal tear strength, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class IV(CBR puncture resistance, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class IV(Maximum UV resistance (after 500 h exposure), percent)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class I(Mass per unit area, g/m2)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class I(Tensile strength, kN/m)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class I(Trapezoidal tear strength, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class I(CBR puncture resistance, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class I(Maximum UV resistance (after 500 h exposure), percent)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class II(Mass per unit area, g/m2)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class II(Tensile strength, kN/m)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class II(Trapezoidal tear strength, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class II(CBR puncture resistance, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class II(Maximum UV resistance (after 500 h exposure), percent)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class III(Mass per unit area, g/m2)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class III(Tensile strength, kN/m)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class III(Trapezoidal tear strength, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class IV(CBR puncture resistance, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class IV(Maximum UV resistance (after 500 h exposure), percent)	-	0	-

-
-

12268

Ahmedabad Textile Industry's Research Association (ATIRA), Ahmedabad

7173002

IS 16352 (2020)

Geosynthetics – High density polyethylene (HDPE) geomembranes for lining – Specification (first revision)

148070 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5,3.1, Table1,i) a) Type I / II / III / IV / V / VI / VII IS 7016 (Part 1)(Length)	-	300	-
5,3.1, Table1,i) b) Type I / II / III / IV / V / VI / VII IS 7016 (Part 1)(width)	-	300	-
5,3.1, Table1,ii) Type I / II / III / IV / V / VI / VII Method A of IS 13162 (Part 3)(Average thickness at a pressure of 2 ± 0.01 kPa)	-	400	-
5,3.1, Table1,iv) a) Type I / II / III / IV / V / VI / VII Annex B(Tensile properties: Yield strength,)	-	0	-
5,3.1, Table 2,v) b) Type I / II / III / IV / V / VI Annex B(Tensile properties: Breaking strength,)	-	800	-
5,3.1, Table1,iv) c) Type I / II / III / IV / V / VI / VII Annex B(Tensile properties: Yield elongation)	-	0	-
5,3.1, Table1,v) Type I / II / III / IV / V / VI / VII Annex C(Tear resistance)	-	800	-
5,3.1, Table 2,vii) Type I / II / III / IV / V / VI Annex D(Puncture resistanc)	-	1200	-
5,3.1, Table 2,viii) Type I / II / III / IV / V / VI Annex E(Low temperature crack resistance at minus 30°C±1°C)	-	1000	-
5,3.1, Table 2,xiv) Type I / II / III / IV / V / VI Oven method of IS 7016 (Part 8), ISO 11357-6 and ASTM D 5885(Oven ageing at 85°C, Retention of oxidative induction time (OIT) after 90 days : a) Standard OIT or b) High pressure OIT)	-	119600	-
5,3.1, Table 2,x) Type I / II / III / IV / V / VI Annex G(Seam strength : 85 percent of the original actual fabric strength or unbreakable seam)	-	950	-
5,3.1, Table1,i) a) Type I / II / III / IV / V / VI / VII IS 7016 (Part 1)(Length)	-	0	-
5,3.1, Table1,i) b) Type I / II / III / IV / V / VI / VII IS 7016 (Part 1)(width)	-	0	-
5,3.1, Table1,ii) Type I / II / III / IV / V / VI / VII Method A of IS 13162 (Part 3)(Average thickness at a pressure of 2 ± 0.01 kPa)	-	0	-
5,3.1, Table1,iv) a) Type I / II / III / IV / V / VI / VII Annex B(Tensile properties: Yield strength,)	-	0	-
5,3.1, Table 2,v) b) Type I / II / III / IV / V / VI Annex B(Tensile properties: Breaking strength,)	-	0	-
5,3.1, Table1,iv) c) Type I / II / III / IV / V / VI / VII Annex B(Tensile properties: Yield elongation)	-	0	-
5,3.1, Table1,v) Type I / II / III / IV / V / VI / VII Annex C(Tear resistance)	-	0	-
5,3.1, Table 2,vii) Type I / II / III / IV / V / VI Annex D(Puncture resistanc)	-	0	-
5,3.1, Table 2,viii) Type I / II / III / IV / V / VI Annex E(Low temperature crack resistance at minus 30°C±1°C)	-	0	-
5,3.1, Table 2,xiv) Type I / II / III / IV / V / VI Oven method of IS 7016 (Part 8), ISO 11357-6 and ASTM D 5885(Oven ageing at 85°C, Retention of oxidative induction time (OIT) after 90 days : a) Standard OIT or b) High pressure OIT)	-	0	-
5,3.1, Table 2,x) Type I / II / III / IV / V / VI Annex G(Seam strength : 85 percent of the original actual fabric strength or unbreakable seam)	-	0	-
5,3.1, Table1,xii) Type I / II / III / IV / V / VI / VII ISO 11357 (Part 6) or ASTM D 5885(Oxidative induction time (OIT) : a) Standard OIT or b) High pressure OIT)	-	10000	-
5,3.1, Table1,i) a) Type I / II / III / IV / V / VI / VII IS 7016 (Part 1)(Length)	-	0	-
5,3.1, Table1,i) b) Type I / II / III / IV / V / VI / VII IS 7016 (Part 1)(width)	-	0	-
5,3.1, Table1,ii) Type I / II / III / IV / V / VI / VII Method A of IS 13162 (Part 3)(Average thickness at a pressure of 2 ± 0.01 kPa)	-	0	-
5,3.1, Table1,iv) a) Type I / II / III / IV / V / VI / VII Annex B(Tensile properties: Yield strength,)	-	0	-
5,3.1, Table 2,v) b) Type I / II / III / IV / V / VI Annex B(Tensile properties: Breaking strength,)	-	0	-
5,3.1, Table1,iv) c) Type I / II / III / IV / V / VI / VII Annex B(Tensile properties: Yield elongation)	-	0	-
5,3.1, Table1,v) Type I / II / III / IV / V / VI / VII Annex C(Tear resistance)	-	0	-
5,3.1, Table 2,vii) Type I / II / III / IV / V / VI Annex D(Puncture resistanc)	-	0	-
5,3.1, Table 2,viii) Type I / II / III / IV / V / VI Annex E(Low temperature crack resistance at minus 30°C±1°C)	-	0	-
5,3.1, Table 2,xiv) Type I / II / III / IV / V / VI Oven method of IS 7016 (Part 8), ISO 11357-6 and ASTM D 5885(Oven ageing at 85°C, Retention of oxidative induction time (OIT) after 90 days : a) Standard OIT or b) High pressure OIT)	-	0	-
5,3.1, Table 2,x) Type I / II / III / IV / V / VI Annex G(Seam strength : 85 percent of the original actual fabric strength or unbreakable seam)	-	0	-
5,3.1, Table1,xii) Type I / II / III / IV / V / VI / VII ISO 11357 (Part 6) or ASTM D 5885(Oxidative induction time (OIT) : a) Standard OIT or b) High pressure OIT)	-	0	-
5,3.1, Table1,i) a) Type I / II / III / IV / V / VI / VII IS 7016 (Part 1)(Length)	-	0	-
5,3.1, Table1,i) b) Type I / II / III / IV / V / VI / VII IS 7016 (Part 1)(width)	-	0	-
5,3.1, Table1,ii) Type I / II / III / IV / V / VI / VII Method A of IS 13162 (Part 3)(Average thickness at a pressure of 2 ± 0.01 kPa)	-	0	-
5,3.1, Table1,iv) a) Type I / II / III / IV / V / VI / VII Annex B(Tensile properties: Yield strength,)	-	0	-
5,3.1, Table 2,v) b) Type I / II / III / IV / V / VI Annex B(Tensile properties: Breaking strength,)	-	0	-
5,3.1, Table1,iv) c) Type I / II / III / IV / V / VI / VII Annex B(Tensile properties: Yield elongation)	-	0	-
5,3.1, Table1,v) Type I / II / III / IV / V / VI / VII Annex C(Tear resistance)	-	0	-
5,3.1, Table 2,vii) Type I / II / III / IV / V / VI Annex D(Puncture resistanc)	-	0	-
5,3.1, Table 2,viii) Type I / II / III / IV / V / VI Annex E(Low temperature crack resistance at minus 30°C±1°C)	-	0	-
5,3.1, Table 2,xiv) Type I / II / III / IV / V / VI Oven method of IS 7016 (Part 8), ISO 11357-6 and ASTM D 5885(Oven ageing at 85°C, Retention of oxidative induction time (OIT) after 90 days : a) Standard OIT or b) High pressure OIT)	-	0	-
5,3.1, Table 2,x) Type I / II / III / IV / V / VI Annex G(Seam strength : 85 percent of the original actual fabric strength or unbreakable seam)	-	0	-
5,3.1, Table1,xii) Type I / II / III / IV / V / VI / VII ISO 11357 (Part 6) or ASTM D 5885(Oxidative induction time (OIT) : a) Standard OIT or b) High pressure OIT)	-	0	-
5,3.1, Table1,x) Type I / II / III / IV / V / VI / VII IS 2530(Carbon black content)	-	0	-
5,3.1, Table2,iv) Type I / II / III / IV / V / VI Annex L(Average asperity height)	-	400	-
5,3.1, Table1,xiv) Type I / II / III / IV / V / VI / VII Annex H(Retention of breaking strength after UV exposure of 144 h : 85 percent of the original actual fabric strength)	-	12320	-

-
-

12269

THE SOUTH INDIA TEXTILE RESEARCH ASSOCIATION (SITRA), COIMBATORE

6165234

IS 17788 (2021)

Medical Textiles Nonwoven Fabric for Wipes Specification

4355 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 6.1, Table 1, (i)(Fibre identification)	-	800	Testing charges pertain to identification of two different fibers
Clause 6.1, table 1, (ii)(Weight per square metre, g/m2)	-	250	-
Caluse 6.1, Table 1, (iii) (a)(Absorption a) Sinking time, s, Max)	-	675	-
Caluse 6.1, Table 1, (iii) (b)(Absorption b) Water holding capacity, percent, Min)	-	700	-
Clause 6.1 , Table 1, (iv) (a)(Breaking strength (dry), N, Min a) Machine direction)	-	1680	Includes the testing charges for breaking strength (dry and wet) in both machine and cross direction.
Clause 6.1 , Table 1, (iv) (b)(Breaking strength (dry), N, Min b) Cross direction)	-	0	Charges included
Clause 6.1, Table 1, (v) (a)(Breaking strength (wet), N, Min a) Machine direction)	-	625	-
Clause 6.1, Table 1, (v) (b)(Breaking strength (wet), N, Min b) Cross direction)	-	0	Parameter Repeated
Clause 6.1, Table 1, (vi)(pH)	-	250	-
Clause 6.1, Table 1, (i)(Fibre identification)	-	0	Parameter Repeated
Clause 6.1, table 1, (ii)(Weight per square metre, g/m2)	-	0	Parameter Repeated
Caluse 6.1, Table 1, (iii) (a)(Absorption a) Sinking time, s, Max)	-	0	Parameter Repeated
Caluse 6.1, Table 1, (iii) (b)(Absorption b) Water holding capacity, percent, Min)	-	0	Parameter Repeated
Clause 6.1 , Table 1, (iv) (a)(Breaking strength (dry), N, Min a) Machine direction)	-	0	Parameter Repeated
Clause 6.1 , Table 1, (iv) (b)(Breaking strength (dry), N, Min b) Cross direction)	-	0	Parameter Repeated
Clause 6.1, Table 1, (v) (a)(Breaking strength (wet), N, Min a) Machine direction)	-	0	Parameter Repeated
Clause 6.1, Table 1, (v) (b)(Breaking strength (wet), N, Min b) Cross direction)	-	0	Parameter Repeated
Clause 6.1, Table 1, (vi)(pH)	-	0	Parameter Repeated

-
For Table 1 iii) Absorption a) Sinking Time b) Water holding capacity, same equipment is mapped for a) and b), however as per IS the equipment are not same. Also please mention the equipment range, least count and calibration validity and traceability

12270

THE SOUTH INDIA TEXTILE RESEARCH ASSOCIATION (SITRA), COIMBATORE

6165234

IS 17787 (2021)

Medical Textiles Nonwoven Wipes Specification

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 6.1, Table 1, (i)(Length and width, mm)	-	250	-
Clause 6.1, Table 1, (ii)(pH)	-	250	-
Clause 6.1, Table 1, (iii)(Total viable count, (cfu/g), Max)	-	3750	-
Clause 6.1, Table 1, (iv)(Pseudomonas aeruginosa)	-	600	-
Clause 6.1, Table 1, (v)(Staphylococcus aureus)	-	600	-
Clause 6.1, Table 1, (vi)(Candida albicans)	-	600	-
Clause 6.1, Table 1, (vii)(E. coli)	-	600	-
Clause 6.1, Table 1, (viii)(Anti-bacterial activity (optional), absorption method,)	-	2850	-

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number