BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15361 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

12271

Atharva Laboratories Pvt. Ltd. (C-54), Noida

8165026

IS 16333 : Part 3 (2022)

Mobile phone handsets: Part 3 Indian language support for mobile phone handsets - Specific requirements(Second Revision)

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Inputting of text)	-	3750	ok
5.2(Message Readability)	-	3750	ok
5.1(Inputting of text)	-	0	ok
5.2(Message Readability)	-	0	ok

23 Feb, 2029

-
-

12272

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 10124 : Part 1 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 1 General Requirements (Second Revision)

20 to 630 mm

4925.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Material)	-	1100.00	Optional on raw material 1. K-value- 1100.00
5.1 Table-1 Fig.1(Dimension of Socket length)	-	500.00	all dimension have single charge.
5.1.2 Table-1(Dimensions of mean inside diameter at mid-point of socket depth)	-	0.00	all dimension have single charge.
5.1.3 (Out of Roundness Tolerance of Socket Inside Diameter)	-	0.00	all dimension have single charge.
5.2 Table-2 Fig.2(Dimensions of socket for elastomeric sealing ring)	-	0.00	all dimension have single charge.
6.1(Opacity test in accordance with IS 12235 (Part 3))	-	575.00	-
6.2(Short Term Hydraulic Test in accordance with Annex A)	-	850.00	-
6.3(Effect on water test)	-	3000.00	-
8(Marking)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
3.1(Material)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
4(Size of fitting)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
3.2.3(socket, measurements)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.

24 Apr, 2027

-
VCM Content

12273

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 7834 : Part 8 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 8 Specific requirements for caps

16 To 315 mm

5750.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2.2(diameter of the socket of cap)	-	500.00	All dimensions have Single Charge.
2.1(General)	-	5250.00	1. Stress Relief Test- 700.00 2. Opacity - 700.00 3. Effect on Water- 3000.00 4. Short term Hydraulic - 850.00
2.1(General)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
2.2(Manufacture)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
2.2(Manufacture)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
2.2.2(diameter of the socket of cap)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
2.2.2 table 1(Laying length)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.

24 Apr, 2027

-
Exclusion: Cl 6.1.1 (VCM Content Test)

12274

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 7834 : Part 7 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 7 Specific requirements for unions

16 TO 315 MM

5750.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2.2, Table 1(Union Laying Length)	-	500.00	-
2.2.3( inside diameter of the socket)	-	0.00	All dimensions have single charge.
2.2.3(Socket length)	-	0.00	All dimensions have single charge.
2.1(General)	-	5250.00	1. Stress Relief Test- 700.00 2.Opacity - 700.00 3. Effect on water - 3000.00 4. Short term hydraulic - 850.00
table 1 sl.no: 01(16 )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 02(20 )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 03(25 )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 04(32 )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 05(40 )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 06(50 )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 07(63 )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
2.2(Manufacture)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
2.2.2, Table 1(Size)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
2.1(General)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
2.2(Manufacture)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
2.2.2, Table 1(Size)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
2.2.2, Table 1(Union Laying Length)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
2.2.3( inside diameter of the socket)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
2.2.3(Socket length)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
2.2.2 table 1(Laying length)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.

24 Apr, 2027

-
Exclusion: Cl 6.1.1 (VCM Content Test)

12275

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 7834 : Part 6 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 6 Specific requirements for sockets

16 TO 315 MM

5750.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2.2, Table 1(Socket Laying Length)	-	500.00	-
2.2.3( inside diameter of the socket)	-	0.00	ALL DIMENSION HAVE SINGLE CHARGE.
2.2.3(Socket length)	-	0.00	ALL DIMENSION HAVE SINGLE CHARGE.
2.1(General)	-	5250.00	1. STRESS RELIEF TEST- 700.00 2. OPACITY - 700.00 3. EFFECT ON WATER- 3000.00 4. SHORT TERM HYDRAULIC- 850.00
table 1 sl.no: 01(16 )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 02(20 )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 03(25 )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 04(32 )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 05(40 )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 06(50 )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 07(63 )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 08(75 )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 09(90 )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 10(110 )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 11(125 )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 12(140 )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 13(160 )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 14( 180 )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 15(200 )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 16(225 )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 17(250.0)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 18(280.0)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 19(315.0)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
2.2(Manufacture)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
2.1(General)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
2.2.2, Table 1(Size)	-	0.00	-
2.2(Manufacture)	-	0.00	-
2.2.2, Table 1(Size)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
2.2.2, Table 1(Socket Laying Length)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
2.2.3( inside diameter of the socket)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
2.2.3(Socket length)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
2.2.2 table 1(Laying length)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.

24 Apr, 2027

-
Exclusion: Cl 6.1.1 (VCM Content Test)

12276

ADS LABTECH, GHAZIABAD

8178326

IS 7098 : Part 1 (1988)

Specification for crosslinked polyethylene insulated pvc sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision)

1100 V

28000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(CONDUCTOR: MATERIALS)	-	0	-
4(INSULATION : MATERIALS)	-	0	-
5.1(FILLER AND INNER SHEATH)	-	0	-
5.2(FILLER AND INNER SHEATH)	-	0	-
6(ARMOURING)	-	0	-
7(OUTER SHEATH)	-	0	-
8.1(CONDUCTOR: CONSTRUCTION)	-	0	-
8.2(PROTECTIVE BARRIER)	-	0	-
8.3(SIZE OF NEUTRAL CONDUCTOR)	-	0	-
9.1(Insulation Applied by extrusicn)	-	0	-
9.2(Thickness of Insulation - Average)	-	250	-
9.3(Thickness of Insulation - Minimum)	-	250	-
9.4(Application of Insulation)	-	0	-
10.1(Core Identification)	-	0	-
10.2(Core Identification- Neutral)	-	0	-
10.3(Core Identification by number )	-	0	-
10.4(Core Identification by number - Neutral )	-	0	-
11(LAVING UP OF CORES)	-	0	-
12.1 & 12.2(Inner sheath : Application)	-	0	-
12.3(Thickness of Inner Sheath)	-	200	-
13.1(Armouring: Application)	-	0	-
13.1.2(Armouring: Coverage )	-	200	-
13.1.3(Armouring: Direction of Lay )	-	0	-
13.2(Type of armour )	-	0	-
13.3(Armouring : Dimensions -Wire Diameter)	-	200	-
13.3(Armouring : Dimensions -Formed wire )	-	200	-
13.4(Armour: Joint)	-	0	-
13.5(Armouring : Resistance Test)	-	300	-
13.6 a)(ARMOURING: Tensile Strength)	-	250	-
13.6 b)(ARMOURING: Elongation )	-	250	-
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	250	-
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	250	-
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	250	-
13.6 f)(ARMOURING: Mass of zinc coating )	-	250	-
13.6 g)(ARMOURING: Resistivity)	-	250	-
14.1(Outer Sheath : Application)	-	0	-
14.2(Colour of outer sheath)	-	0	-
14.3(Thickness of outer sheath - AVERAGE)	-	200	-
14.3(Thickness of outer sheath - minimum)	-	200	-
15.1 a) i)(Annealing Test ( For copper wire ) )	-	250	-
15.1 a) ii)(Tensile test (for aluminium) - Before stranding )	-	250	-
15.1 a) ii)(Tensile test (for aluminium) - After stranding )	-	250	-
15.1 a) iii)(Wrapping test (for aluminium))	-	250	-
15.1 a) iv)(Resistance test - Main conductor)	-	500	-
15.1 a) iv)(Resistance test - Neutral conductor)	-	300	-
15.1 d) i) (Phyaical tests for insulation : Tensile Test)	-	300	-
15.1 d) i) (Phyaical tests for insulation : Elongation)	-	300	-
15.1 d) ii) (Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	800	-
15.1 d) ii) (Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	800	-
15.1 d) iii) (Phyaical tests for insulation : Hot set )	-	400	-
15.1 d) iii) (Phyaical tests for insulation : Permanent set )	-	400	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage )	-	300	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage - Crack observed )	-	0	-
15.1 d) v) (Insulation: Waterabsorption(gravimetric))	-	2500	-
15.1 e) i) (Physical tests for outer sheath : Tensile stregth)	-	200	-
15.1 e) i) (Physical tests for outer sheath : Elongation)	-	200	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	800	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	0	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	800	-
15.1 e) iii) (Sheath: Loss of mass in air oven)	-	1800	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage )	-	200	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage - Crack observed )	-	0	-
15.1 e) v) (Sheath : Hot deformation)	-	500	-
15.1 e) vi) (Sheath : Heat shock test)	-	200	-
15.1 e) vii) (Sheath : Thermalstability)	-	300	-
15.1 f)(INSULATION RESISTANCE TEST : Volume resistivity )	-	400	-
16.2(HIGH VOLTAGE TEST )	-	800	-
16.3(FLAMMABILITY TEST : Period of Burning )	-	600	-
16.3(FLAMMABILITY TEST : Unaffected length )	-	600	-
16.9(Oxygen Index Test)	-	1350	-
16.1(Flame Retardance Test on Single Cables)	-	800	-
16.11(Flame Retardance Test on Bunched Cables)	-	5000	-
16.13(Test for Halogen Acid Gas Evolution)	-	2250	-
16.14(Temperature Index)	-	1250	-
17.1(Manufacturer'. identification)	-	0	-
17.2(cable Indentification )	-	0	-
17.3(cable Code )	-	0	-
15.4 (a)(Cold bend)	-	300	-
15.4 (b)(Cold impact)	-	0	-
Table 1(Ageing in air oven - Elongation on Insulation)	-	800	-
Table 1(Ageing in air oven - Tensile strength on Insulation)	-	800	-
Table 1(Ageing in air oven - Elongation on Insulation)	-	800	-
Table 1(Ageing in air oven - Tensile strength on Insulation)	-	800	-
Table 4(Copper purity test)	-	0	-
Cl No. 16.15(Smoke density test)	-	3000	-
Table 2(Cold Impact test for Outer sheath)	-	300	-
Table 2(Cold bend test for Outer sheath)	-	300	-

15 May, 2027

-
-

12277

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 7834 : Part 5 (1987)

Injection Moulded PVC Socket Fittings With Solvent Cement Joints for Water Supplies - Part 5 : Specific Requirements for 45 degree Tees

16 TO 315 MM

5750.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2.2, Table 1(45 ̊ Tees Laying Length, Z)	-	500.00	ALL DIMENSION HAVE SINGLE CHARGE.
2.2.3( inside diameter of the socket)	-	0.00	ALL DIMENSION HAVE SINGLE CHARGE.
2.2.3(Socket length)	-	0.00	ALL DIMENSION HAVE SINGLE CHARGE.
2.1(General)	-	5250.00	1. STRESS RELIEF TEST - 700.00 2. OPACITY - 700.00 3. EFFECT ON WATER - 3000.00 4. SHORT TERM HYDRAULIC - 850.00
table 1 sl.no: 01(16 (Z) )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 02(20 (Z) )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 03(25 (Z) )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 04(32 (Z) )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 05(40 (Z) )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 06(50 (Z) )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 07(63 (Z) )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 08(75 (Z) )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 09(90 (Z) )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 10(110 (Z) )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 11(125 (Z) )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 12(140 (Z) )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 13(160(z))	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 01(16 (Z1) )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 02(20 (Z1) )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 03(25 (Z1) )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 04(32 (Z1) )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 05(40 (Z1) )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 06(50 (Z1) )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 07(63 (Z1) )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 08(75 (Z1) )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 09(90 (Z) )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 10(110 (Z1) )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 11(125 (Z1) )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 12(140 (Z1) )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 13(160(z1))	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
2.1(General)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
2.2(Manufacture)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
2.2.2, Table 1(Size)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
2.2.2, Table 1(45 ̊ Tees Laying Length, Z1)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
2.2(Manufacture)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
2.2.2, Table 1(Size)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
2.2.2, Table 1(45 ̊ Tees Laying Length, Z)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
2.2.2, Table 1(45 ̊ Tees Laying Length, Z1)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
2.2.3( inside diameter of the socket)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
2.2.3(Socket length)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
2.2.2 table 1(Laying length)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.

24 Apr, 2027

-
Exclusion: Cl 6.1.1 (VCM Content Test)

12278

BIS, Eastern Regional Laboratory (ERL)

None

IS 9873 : Part 3 (2020)

Safety of Toys Part 3 Migration of Certain Elements ( Third Revision )

Rs.3600.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 - Table 1 (Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 (Sample preparation as per clause 8 of IS 9873 Part 3:1999)	-
Cl-4.1 & 4.2,Table 1,sl.no-i (Sb)	-
Cl-4.1 & 4.2,Table 1,sl.no-ii (As)	-
Cl-4.1 & 4.2,Table 1,sl.no-iii (Ba)	-
Cl-4.1 & 4.2,Table 1,sl.no-iv (Cd)	-
Cl-4.1 & 4.2,Table 1,sl.no-v (Cr)	-
Cl-4.1 & 4.2,Table 1,sl.no-vi (Pb)	-
Cl-4.1 & 4.2,Table 1,sl.no-vii (Hg)	-
Cl-4.1 & 4.2,Table 1,sl.no-viii (Se)	-

-
Complete, except- cl 13 RADIOGRAPHIC EXAMINATION

12279

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 7834 : Part 3 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 3 Specific requirements for 90 degree elbows

16 TO 315 MM

5750.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
cl 2.2.2(Dimensions)	-	500.00	-
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Lead (first extraction) - Appendix C )	-	5250.00	1. STRESS RELIEF TEST- 700.00 2. OPACITY - 700.00 3. EFFECT ON WATER - 3000.00 4. SHORT TERM HYDROSTATIC PRESSURE TEST - 850.00
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Lead (third extraction) - Appendix C)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Dialkyl tin C4 and higher homologues measured as tin (third extraction) - Appendix C)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Other toxic substances (third extraction) - Appendix C)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
2.2.2 table 1(Laying length)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.

24 Apr, 2027

-
Exclusion: Cl 6.1.1 (VCM Content Test)

12280

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 7834 : Part 2 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 2 Specific requirements for 45 degrees elbows

16 to 315 mm

5750.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(General)	-	4400.00	Stress Relief Test - 700.00 Opacity - 700.00 Effect on Water - 3000.00
2.2.3( inside diameter of the socket)	-	500.00	All the dimension have single charge.
6.4 PART-1(Short term hydraulic test)	-	850.00	-
2.1(General)	-	0	-
table 1 sl.no: 01(16 )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 02(20 )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 03(25 )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 04(32 )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 05(40 )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 06(50 )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 07(63 )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 08(75 )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 09(90 )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 10(110 )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 11(125 )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 12(140 )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 13(160 )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 14( 180 )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 15(200 )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 16(225 )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 17(250.0)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 18(280.0)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
table 1 sl.no: 19(315.0)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
2.2(Manufacture)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
2.2.2, Table 1(Size)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
2.2.2, Table 1(45 ̊ Elbow Laying Length)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
2.2.3(socket length)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
2.2(Manufacture)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
2.2.2, Table 1(Size)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
2.2.2, Table 1(45 ̊ Elbow Laying Length)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
2.2.3( inside diameter of the socket)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
2.2.3(socket length)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
2.2.2 table 1(Laying Length)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.

24 Apr, 2027

-
Exclusion: Cl 6.1.1 (VCM Content Test)

12281

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 7834 : Part 1 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 1 General requirements

16 to 315 mm

5750.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4(Minimum Thickness)	-	0.00	Thickness & Other dimension Have single Charge
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Minimum Socket Length)	-	500.00	-
Cl. 6.1(Stress Relief Test- Appendix A)	-	700.00	-
Cl. 6.2(Opacity- Appendix B)	-	700.00	-
Cl. 6.3(Effect on Water[(Lead ( first extraction )]- Appendix C)	-	3000.00	-
Cl. 6.4(Short-Term Hydraulic Test- Appendix D)	-	850.00	-
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Out-of-roundness tolerances of socket inside diameter)	-	0.00	Thickness & Other dimension Have single Charge
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Mean Socket Internal Diameter at Mid-Point of Socket Length)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
Cl. 6.3(Effect on Water[(Lead ( third extraction )]- Appendix C)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
Cl. 6.3(Effect on Water [Dialkyl tin C4, and higher homologues, measured as tin ( third extraction )]- Appendix C)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
Cl. 6.3(Effect on Water [Other toxic substances ( third extraction )]- Appendix C)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
3(Size of Fitting -)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
4(Minimum thickness)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
5(Socket dimensions)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
6.1(Stress Relief Test)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
6.2(Opacity)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
6.3(Effect on Water)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
6.4(Short-Term Hydraulic Test)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
7.2(Production Routine Tests)	-	0.00	-

24 Apr, 2027

-
Exclusion: Cl 6.1.1 (VCM Content Test)

12282

Central Institute of Petrochemicals Engineering & Technology (CIPET), Chandrapur

7173804

IS 2508 (2016)

Polyethylene films and sheets - Specification (Third Revision)

Type i to iv

38156 View breakup
For type I and II= Rs. 14406/- For type III and IV= Rs. 8281/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(Appearance)	-	300	-
5.1.2(Film Form)	-	300	-
5.1.3(Odour)	-	300	-
5.1.4(Density, Cl.5 of IS 13360(Part-3/Section-1))	-	500	-
5.1.5(Melt Flow Index. Cl 6, 7 of IS 13360(Part-4/Section-1))	-	1100	-
5.1.6a(Carbon Black Content, Annex-A)	-	925	-
5.1.6b(Ash Content, Annex-A)	-	950	-
5.1.6c(Carbon Black Dispersion, Cl.16 of IS 2530)	-	700	-
5.2.2(Tolerance on Thickness, Annex-A)	-	300	-
6.1, Table 1(Tensile strength at break. A) Machine Direction. IS 13360 (Part 5/Sec 1))	-	1350	Test =Rs 1100, Sample Preparation=Rs 250
6.1, Table 1(Tensile strength at break. B) Transverse Direction. IS 13360 (Part 5/Sec 3))	-	1100	-
6.1, Table 1(Ageing test at (70-1)c for 7 days , cl 4 IS 7016 )	-	4300	-
6.1, Table 1(Elongation at break ,A) Machine direction .IS 13360(Part-5/sec-1) )	-	1100	-
6.1, Table 1(Elongation at break ,B) Cross-machine direction..IS 13360(Part-5/sec-3) )	-	1100	-
6.1, Table 1(Dartimpact strength Method B of IS 13360 (Part-5/sec-6) )	-	1000	-
7.1. Table 2(Tensile strength at break A) Machine direction IS 13360 (Part-5/sec-1) )	-	1350	Test = Rs 1100, Sample Preparation=Rs 250
7.1. Table 2(Tensile strength at break,B) Crosse machine direction IS 13360 (Part-5/sec-3) )	-	1100	-
7.1. Table 2(Ageing test at (70-1)c for 7 days , cl 4 IS 7016 )	-	4300	-
7.1. Table 2(Elongation at break , A) Machine direction IS 13360 (Part-5/sec-3) IS 13360 (Part-5/sec-1) )	-	1100	-
7.1. Table 2(Elongation at break , A) Transverse direction IS 13360 (Part-5/sec-3) )	-	1100	-
7.1. Table 2(Dart impact strenght , Method A of IS 3360 (Part-5/sec-6) )	-	1000	-
8.1, Table 3(Tensile properties ,A) Yield strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	1100	-
8.1, Table 3(Tensile properties , B) Break strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	1100	-
8.1, Table 3(Tensile properties ,C) Yield elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	1100	-
8.1, Table 3(Tensile properties ,D) Break elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	1100	-
8.1, Table 3(Tear resistance , Annex B)	-	1000	-
8.1, Table 3(Puncture resistance , Annex C)	-	1100	-
9.1, Table 4(Tensile properties ,A) Yield strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	1100	-
9.1, Table 4(Tensile properties , B) Break strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	1100	-
9.1, Table 4(Tensile properties ,C) Yield elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	1100	-
9.1, Table 4(Puncture resistance , Annex C)	-	1100	-
Clause 9.1 (Table 4)(Break Elongation)	-	1100	-
Clause 9.1 (Table 4)(Yield Elonation)	-	1100	-
Clause 9.1 (Table 4)(Yield strength)	-	1100	-
Clause 8.1(Table 3)(Break Elongation)	-	1100	-
Clause 8.1(Table 3)(Break strength)	-	1100	-
Clause 7.1(Table 2)(Decrease in Tensile Strength after Ageing(Transverse Direction))	-	1100	-
Clause 7.1(Table 2)(Decrease in Tensile Strength after Ageing(Machine Direction))	-	1100	-
Clause 6.1(Table 1)(Decrease in Tensile Strength after Ageing(Transverse Direction))	-	1100	-
Clause 6.1(Table 1)(Decrease in Tensile Strength after Ageing(Machine Direction))	-	1100	-
Clause 5.2.3(Tolerance on Width)	-	300	-
9.1, Table 4(Tear resistance , Annex B)	-	1100	-
5.2.1.2(Nominal width)	-	250	-
6.1, Table 1(Tear resistence. A) Machine direction Annex B)	-	1100	-
6.1, Table 1(Tear resistence. B) Transverse direction )	-	1100	-

10 Sep, 2026

-
-

12283

Atharva Laboratories Pvt. Ltd. (D115A), Noida (8134206)

8134206

IS 16333 : Part 3 (2022)

Mobile phone handsets: Part 3 Indian language support for mobile phone handsets - Specific requirements(Second Revision)

17500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Inputting of text)	-	8750	-
5.2(Message Readability)	-	8750	-
5.1(Inputting of text)	-	0	-
5.2(Message Readability)	-	0	-
5.1(Inputting of text)	-	0	-
5.2(Message Readability)	-	0	-
5.1(Inputting of text)	-	0	-
5.2(Message Readability)	-	0	-
5.1(Inputting of text)	-	0	-
5.2(Message Readability)	-	0	-

21 Jul, 2028

-
Revised Version of IS 16333(Part-3):2022. Included w.e.f. 15.03.2023

12284

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 14887 (2014)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision)

21430.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Material Identification)	-	1050.00	Optional (applicable on Raw materials)
3.2(Tapes – Width and Thickness ( IS 6192/IS 11197))	-	500.00	Optional (applicable on Tapes)
3.2(Tapes – Linear Density (IS 6192/IS 11197))	-	700.00	Optional (applicable on Tapes)
3.2(Tapes – Tenacity (IS 6192/IS 11197))	-	1100.00	Optional (applicable on Tapes)
3.2(Tapes – Elongation at point of rupture (IS 6192/IS 11197))	-	0.00	Optional (applicable on Tapes). Tenacity & elongation have single charge
3.2(Tapes – Heat Shrinkage (HDPE) (Cl. 3.2 and IS 6192))	-	1700.00	Optional (applicable on Tapes)
3.2(Tapes – Colour Fastness for pigmented tapes (IS 6192/IS 11197))	-	19850.00	Optional (applicable on Tapes) Test Charge- 850.00 Conditioning Charge- 19000 (Applicable on Pigmented Tapes)
3.2(Tapes – Dimensional stability (PP) (IS 11197))	-	1400.00	Optional (applicable on Tapes)
3.3.1(Bottom seam (IS 10789))	-	500.00	-
4.1 and 3.4(Mass of bale (Cl. 4.1), Capacity (Cl 3.4))	-	500.00	-
4.2 and Table 1 ii(Dimensions )	-	500.00	-
5.2 and Table 1 iii(Ends per dm )	-	500.00	-
5.2 and Table 1 iv(Picks per dm )	-	500.00	-
4.2 and Table 1 v(Mass of sack )	-	500.00	-
4.2 and Table 1 vi(Average breaking strength of fabric )	-	2200.00	-
4.2 and Table 1 vi(Breaking strength of bottom seam )	-	1100.00	-
4.2 and Table 1 viii(Elongation at break of fabric )	-	0.00	Breaking strength & Elongation have single Charge.
4.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	12380.00	1. UV exposure Charge- 10800.00 2. Breaking strength Length wise- 1100.00 3.breaking strength width wise- 1100.00
4.2 and Table 1 x(Ash content )	-	1200.00	-
3.1(Overall Migration)	-	1700.00	Optional (applicable on raw materials) 1. Sample preparation charge- 625.00
3.2(Density)	-	700.00	Optional (applicable on HDPE raw materials) 1. Sample preparation charge- 625.00
3.2(MFI)	-	1100.00	Optional (applicable on raw materials)
3.2(Tapes – Width and Thickness ( IS 6192/IS 11197))	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
3.2(Tapes – Linear Density (IS 6192/IS 11197))	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
3.2(Tapes – Tenacity (IS 6192/IS 11197))	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
3.2(Tapes – Elongation at point of rupture (IS 6192/IS 11197))	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
3.2(Tapes – Heat Shrinkage (HDPE) (Cl. 3.2 and IS 6192))	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
3.2(Tapes – Colour Fastness for pigmented tapes (IS 6192/IS 11197))	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
3.2(Tapes – Dimensional stability (PP) (IS 11197))	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
3.2(Unlaminated Fabric Mass )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
3.3.1(Bottom seam (IS 10789))	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
4.1 and 3.4(Mass of bale (Cl. 4.1), Capacity (Cl 3.4))	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
4.2 and Table 1 ii(Dimensions )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
5.2 and Table 1 iii(Ends per dm )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
5.2 and Table 1 iv(Picks per dm )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
4.2 and Table 1 v(Mass of sack )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
4.2 and Table 1 vi(Average breaking strength of fabric )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
4.2 and Table 1 vi(Breaking strength of bottom seam )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
4.2 and Table 1 viii(Elongation at break of fabric )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
4.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
4.2 and Table 1 x(Ash content )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
3.2(Unlaminated Fabric Mass )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.

24 Apr, 2027

-
-

12285

Matrix Test Labs

8138626

IS 16333 : Part 3 (2022)

Mobile phone handsets: Part 3 Indian language support for mobile phone handsets - Specific requirements(Second Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Inputting of text)	-	10000	10% discount to BIS
5.2(Message Readability)	-	10000	10% discount to BIS
6(Marking)	-	5000	10% discount to BIS
5.1(Inputting of text)	-	10000	10% discount to BIS
5.2(Message Readability)	-	10000	10% discount to BIS
6(Marking)	-	5000	10% discount to BIS

31 Dec, 2026

-
Included w.e.f. 16-12-2022.

12286

ADS LABTECH, GHAZIABAD

8178326

IS 1554 : Part 1 (1988)

Specification for pvc insulated (Heavy Duty) electric cables: Part 1 for working voltages up to and including 1100 v (Third Revision)

1100V GRADE

29850 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(MATERIALS : CONDUCTOR)	-	0	-
4.1.1(INSULATION : General Purjose Insulaiion)	-	0	-
4.1.2(INSULATION : Heat Resisting Insulation)	-	0	-
5.1(MATERIALS : FILLER AND INNER SHEATH)	-	0	-
5.2(MATERIALS : FILLER AND INNER SHEATH)	-	0	-
6.1(MATERIALS : ARMGURING)	-	0	-
6.2(MATERIALS : ARMGURING)	-	0	-
7.1.1(OUTER SHEATH : For Cables with General Purpose InsuIafion)	-	0	-
7.1.2(OUTER SHEATH : For Cables with Heat Resisting InsuIalion)	-	0	-
8.1(CONSTRUCTION : CONDUCTOR)	-	0	-
8.2(CONSTRUCTION : CONDUCTOR)	-	0	-
9.1(INSULATION )	-	0	-
9.2(INSULATION : Thickness of Insulation)	-	300	-
9.3(INSULATION :Tolerance on Thickness of Insulation)	-	0	-
9.4(INSULATION : Application of Insulation)	-	0	-
10.1(CORE IDENTIFICATION)	-	0	-
10.2(CORE IDENTIFICATION)	-	0	-
10.3(CORE IDENTIFICATION)	-	0	-
10.3.1(Arrangement of Marking)	-	0	-
11.1(LAYING UP OF CORES)	-	0	-
11.2(LAYING UP OF CORES)	-	0	-
12.1(INNER SHEATH)	-	0	-
12.2(INNER SHEATH)	-	0	-
12.3(INNER SHEATH :Thickness of Inner Sheath)	-	200	-
12.3.1(INNER SHEATH :Thickness of Inner Sheath)	-	200	-
13.1.1(ARMOURING : Application)	-	0	-
13.1.2(Armouring: Coverage )	-	200	-
13.1.3(ARMOURING : Direction of lay )	-	0	-
13.1.4(ARMOURING : Application)	-	0	-
13.2(ARMOURING : Type of Armour)	-	0	-
13.2.1(ARMOURING : Type of Armour)	-	0	-
13.3(Armouring : Dimensions -Wire Diameter)	-	200	-
13.3(Armouring : Dimensions -Formed wire )	-	200	-
13.4(ARMOURING : Joints)	-	0	-
13.5.1(ARMOURING : Resistance)	-	300	-
13.5.2(ARMOURING : Resistance)	-	300	-
13.6 a)(ARMOURING: Tensile Strength)	-	150	-
13.6 b)(ARMOURING: Elongation )	-	150	-
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	150	-
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	150	-
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	200	-
13.6 f)(ARMOURING: Mass of zinc coating )	-	200	-
13.6 g)(ARMOURING: Resistivity)	-	200	-
14.1(OUTER SHEATH)	-	0	-
14.2(OUTER SHEATH)	-	0	-
14.3(OUTER SHEATH : Colour )	-	0	-
14.4.1(Thickness of Outer Sheath : Unarmowed Cables)	-	150	-
14.4.2(Thickness of Outer Sheath : Armoured Cables)	-	150	-
15.1 a) 1)(Tests on conductor : Annealing test ( for copper ))	-	300	-
15.1 a) 2)(Tensile test (for aluminium) - Before stranding )	-	200	-
15.1 a) 2)(Tensile test (for aluminium) - After stranding )	-	200	-
15.1 a) 3)(Tests on conductor : Wrapping test ( for aluminium ))	-	150	-
15.1 a) 4)(Tests on conductor : Conductor resistance test)	-	500	-
15.1 d)1)(Phyaical tests for insulation : Tensile Test)	-	300	-
15.1 d)1)(Phyaical tests for insulation : Elongation )	-	300	-
15.1 d)1)(Physical tests for sheath : Tensile stregth )	-	200	-
15.1 d)1)(Physical tests for sheath : Elongation )	-	200	-
15.1 d)2)(Phyaical tests for insulation- Ageing in air Oven : Tensile Test)	-	800	-
15.1 d)2)(Phyaical tests for insulation - Ageing in air oven : Elongation )	-	800	-
15.1 d)2)(Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	0	-
15.1 d)2)(Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	0	-
15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	0	-
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation )	-	0	-
15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	0	-
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	0	-
15.1 d)3)(Phyaical tests for insulation : Shrinkage )	-	200	-
15.1 d)3)(Phyaical tests for insulation : Shrinkage - Crack observed )	-	0	-
15.1 d)3)(Phyaical tests for Sheath : Shrinkage )	-	200	-
15.1 d)3)(Phyaical tests for Sheath : Shrinkage - Crack observed )	-	0	-
15.1 d)4)(Hot deformation : Insulation )	-	300	-
15.1 d)4)(Hot deformation : Sheath )	-	300	-
15.1 d)5)( Loss of mass in air oven- Insulation )	-	800	-
15.1 d)5)( Loss of mass in air oven- sheath )	-	800	-
15.1 d)6)(Heat shock test- Insulation )	-	200	-
15.1 d)6)(Heat shock test- sheath )	-	200	-
15.1 d)7)(Thermal stability- insulation )	-	250	-
15.1 d)7)(Thermal stability- Sheath )	-	250	-
15.1 e)(Insulation resistance test : Volume Resistivity )	-	500	-
15.1 f)(High voltage test ( water immersion test ))	-	600	-
15.1 g)(High voltage test at room temperature)	-	400	-
15.4 a)(Cold bend test- Insulation ( Optional test))	-	300	-
15.4 a)(Cold bend test- Sheath ( Optional test))	-	300	-
15.4 b)(Cold impact test- Insulation ( Optional test))	-	300	-
15.4 b)(Cold impact test- Sheath ( Optional test))	-	300	-
15.4 c)(Armour resistance test ( for other than mining cables ).- Optional test )	-	250	-
16.2(DETAILS OF TESTS : High Voltage Test at Room Temperature)	-	0	-
16.3.2(High Voltage Test ( Water Immersion Test ) : d.c. Test)	-	750	-
16.4(Flammability Test)	-	800	-
16.5(Oxygen Index Test)	-	1400	-
16.6(Flame Retardance Test on Single Cables)	-	900	-
16.7(Flame Retardance Test on Bunched Cables)	-	4000	-
16.9(Test for Halogen Acid Gas Evolution)	-	2250	-
16.1(Temperature Index)	-	1400	-
17.1(IDENTIFICATION : Manufacturer’s Identification)	-	0	-
17.2(IDENTIFICATION : Cable Identification)	-	0	-
17.2.1(IDENTIFICATION : Cable Identification)	-	0	-
17.3(IDENTIFICATION : Cable Code)	-	0	-
15.1.e(Insulation resistance Test- Insulation resistance At Maximum rated temperature temperature)	-	0	-
15.1.e(Insulation resistance Test- Insulation resistance constant At Room temperature)	-	0	-
15.1.e(Insulation resistance Test- Volume Resistivity At Maximum rated temperature temperature)	-	0	-
16.4(Flammability Test- Un affected portion)	-	0	-
16.4(Flammability Test- Period of Burning)	-	0	-
9.3(Minimum Thickness of Reduce core insulation)	-	0	-
9.2(Thickness of Reduce core insulation)	-	0	-
3.1 Table 2 IS 8130(Number of wires in the conductor)	-	0	-
Cl No. 16.10(Smoke density test)	-	4500	-
Table 4(Copper purity test)	-	0	-

15 May, 2027

-
-

12287

BIS, Eastern Regional Laboratory (ERL)

None

IS 15658 (2021)

Concrete Paving Blocks - Specification ( First Revision )

For all grade

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 7.1.1 (General Quality)	-
Clauses 7.1.2 & 9.1.2 (Visual Inspection)	-
Clause 7.1.3 (Colour and Texture)	-
Clause 7.2, Table No. 2, SI No. (i) (Width, W)	-
Clause 7.2, Table No. 2, SI No. (i) (Indivdual Width, W)	-
Clause 7.2, Table No. 2, SI No. (ii) (Length, L)	-
Clause 7.2, Table No. 2, SI No. (ii) (Indivdual Length, L)	-
Clause 7.2, Table No. 2, SI No. (iii) (Thickness, Th)	-
Clause 7.2, Table No. 2, SI No. (iii) (Indivdual Thickness, Th)	-
Clause 7.2, Table No. 2, SI No. (iv) (Aspect Ratio, L/Th)	-
Clause 7.2, Table No. 2, SI No. (iv) (Indivdual Aspect Ratio, L/Th)	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v) (Arris/chamfer, Width)	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v) (Indivdual Arris/chamfer, Width)	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v) (Arris/chamfer, Depth)	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v) (Indivdual Arris/chamfer, Depth)	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi) (Thickness of wearing Layer)	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi) (Indivdual Thickness of wearing Layer)	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii) (Plan Area (Asp))	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii) (Indivdual Plan Area (Asp))	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii) (Ratio of wearing face area and Plan area (Asw/Asp))	-
Clause 7.2 & 9.1.3, Table 2, SI No. (ix) (Deviation from squareness)	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) a) ( Indivdual Water absorption)	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) b) (Water absorption (Average of three test specimens))	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) a) (Indivdual Compressive strength (i))	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b) (Compressive strength (Average of eight test specimens))	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) i) ( Indivdual Dry Abrasion Resistance )	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) ii) (Dry Abrasion resistance (Average of three test specimens))	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) i) ( Indivdual Wet Abrasion Resistance )	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) ii) (Wet Abrasion resistance (Average of three test specimens))	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) a) (Indivdual Tensile splitting strength (i))	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) b) (Average Tensile splitting strength )	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) a) (Indivdual Flexural strength (i))	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) b) (Average Flexural strength )	-
Clause 7.3, Annex F (Individual Failure Load per unit Length)	-
Clause 7.3, Annex F (Average Failure Load per unit Length)	-
7.2- TABLE-2- (i) IS-15658 (Annex-B) (Individual Width - Lower)	-
7.2- TABLE-2- (i) IS-15658 (Annex-B) (Average Width -Lower)	-
7.2- TABLE-2- (i) IS-15658 (Annex-B) (Individual Width - Higher)	-
7.2- TABLE-2- (i) IS-15658 (Annex-B) (Average Width -Higher)	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) a) (Indivdual Flexural strength (i))	-

-
Excluding Freeze Thaw Durability (Optional tests)

12288

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 15328 (2003)

Unplasticized Non-Pressure Polyvinyl Chloride ( PVC -U ) Pipes for use in Underground Drainage and Sewerage Systems -

SIZE 110 -315 MM

23700.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1,6.1.1 IS 12235 (Part 1) Table 1(Dimension of Pipes: Mean outside Diameter, dem)	-	500.00	ALL DIMENSION HAVE SINGLE CHARGE (SOCKET AND PIPE).
6.1,6.1.1 IS 12235 (Part 1) Table 1(Outside Diameter at any point, de)	-	0.00	ALL DIMENSION HAVE SINGLE CHARGE (SOCKET AND PIPE).
6.1.4, Table 3(Dimensions of integral sockets and spigot ends :- a) Elastomeric Sealing Ringsockets and spigot ends i)Meean inside dia. Of socket, dsm)	-	0.00	ALL DIMENSION HAVE SINGLE CHARGE (SOCKET AND PIPE).
7.1(Appearance:- )	-	500.00	-
7.2(Colour )	-	500.00	-
7.3 IS 1223S ( Part 2)(Vicat Softening Temperature When determined according to IS 1223S ( Part 2), shall not be lessthan 79°C.)	-	1100.00	-
7.4 IS 1223S ( Part 5)(Longitudinal Reversion: When tested according to the methodprescribed in IS 1223S ( Part 5), shall not exceed ± 5 percent. The pipe shall not exhibit any blisters, bubbles or crackson completion of the test.)	-	1200.00	Test Charge- 700.00 SPECIMEN PREPARATION CHARGE- 500.00
8.1 Annex B(Resistance to External Blows at 0ºC: When tested according to the method prescribed in Annex B, the pipes hall have a true impact rate of not more than I0 percent.)	-	1600.00	Test Charge- 1100.00 SPECIMEN PREPARATION CHARGE- 500.00
8.2 Annex C Table 5(Ring Stiffness: When tested according to the method described in Annex C,the ring stiffness of the pipe shall be as stated in Table 5)	-	1600.00	Test Charge- 1100.00 SPECIMEN PREPARATION CHARGE- 500.00
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(Resistance to internal Hydrostatic Pressure(Type Test) a) Acceptance Test:(1h at 27 0 C) )	-	11850.00	1- TYPE TEST 1000 HOURS- 11000.00 2 - ACCEPTANCE TEST 1 HOURS- 850.00
10.1.1 Annex D(Internal hydrostatic pressure test for elastomeric sealing ring joints)	-	850.00	-
10.2.2(Internal negative hydrostatic pressure test (internal vacuum)for solvent cemented joints)	-	1000.00	-
6.1.2 IS 4985 Table 2(Wall Thickness, e )	-	0.00	ALL DIMENSION HAVE SINGLE CHARGE (SOCKET AND PIPE).
5,5.2(Composition of the material The material shall contain a minimum of 0.3 percent of rutile grade titanium dioxide.)	-	1200.00	-
6.1.3 (Length of Pipe)	-	0.00	-
6.1.4, Table 3(ii) Min. depth of engagement, A. )	-	0.00	-
6.1.4 Table 3(iii) Depth of sealing Zone C )	-	0.00	-
6.1.4, Table 3(iv) Length of spigot, l1)	-	0.00	-
6.1.4, Table 3(v) Chamfer length, H : Approx.)	-	0.00	-
6.1.4.1 (wall thickness of sockets e2 min=0.9e )	-	0.00	-
6.1.4.1 (e3min=0.75e)	-	0.00	-
6.1.4, Table 4(b) Solvent Cement Joint sockets and spigot ends i) Mean inside dia. Of socket, dsm)	-	0.00	-
6.1.4, Table 4(ii) Length of Solvent Cement socket, l2 )	-	0.00	-
6.1.4, Table 4(iii) Length of spigot, l1, 100 mm Min.)	-	0.00	-
6.1.4, Table 4(iv) Chamfer length, H, 7 mm Approx.)	-	0.00	-
7(Physical characteristics )	-	0.00	-
7.1(Appearance:- )	-	0.00	-
8(MECHANICAL CHARACTERISTICS)	-	0.00	-
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(b) Type Test:(1000h at 60 0 C) )	-	0.00	-
9 9.1, IS 5382(JOINTS:- a) Elastomeric Sealing Rings)	-	0.00	-
9.2 IS 14182(b) Solvent cement)	-	0.00	-
10(Performance requirements)	-	0.00	-
10.1.2 Annex E(Internal negative hydrostatic pressure test (internal vacuum) for elastomeric sealing ring joints)	-	0.00	-
10.2.1(Internal hydrostatic pressure test for solvent cemented Joints)	-	0.00	-
'7.5 (amdt.7)(Effect on Water (Type test))	-	0.00	-
5.3(Qualitative)	-	0.00	-
12(Marking)	-	0.00	-

24 Apr, 2027

-
-

12289

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 13592 (2013)

Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Soil and Waste Discharge System Inside and Outside Buiildings Including Ventilation and Rainwater System

TYPE-A & TYPE B SIZE- 40-315 MM

21550.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5(Surface colour of the pipes shall be dark shade of grey)	-	500.00	-
Cl6.3(The composition shall be based on PVC resin having a K-value of 64 or greater when tested in accordance with IS 4669)	-	1100.00	-
Cl.7.1(Mean out side Diameter (For less than or equal to 40 mm- Average of 8 , For higher diameters up to 110 mm average of 6))	-	500.00	-
Cl.7.3.2(Dimensions of sockets for solvent cementing and grooved sockets of pipes shall be as given in Tables 3 and 4 respectively, read with Fig. 2 and 3.)	-	500.00	-
Cl.8.1(The internal and external surface of the pipes shall be smooth and clean, and free from grooving and other defects. The end shall be clearly cut and shall be square with the axis of the pipe. The end may be chamfered on the plain side.)	-	500.00	-
Cl.8.2(When tested by the method described in IS 12235 (Part 5), a length of pipe sample of 200 ± 20 mm shall not alter in length by more than 5 percent. In the case of socket ended pipes, this test shall be carried out on the plain portion of pipe taken at least 100 mm away from the root of the socket.)	-	1200.00	Test Charge- 700.00 SPECIMEN PREPARATION CHARGE- 500.00
Cl8.3(This test shall be carried out for socket end pipes only. When tested by the method described in IS 12235 (Part 6), the test specimens shall not show blisters, excessive delamination or cracking or signs of weld line splitting.)	-	700.00	-
Cl.8.4(When determined in accordance with IS 12235 (Part 2), the vicat softening temperature of the specimen shall not be less than 79°C.)	-	1100.00	-
Cl.8.5(After the required period of exposure, the tensile strengths of two samples when tested as per IS 12235 (Part 13) shall not show difference of more than 20 percent of their initial tensile strengths)	-	3500.00	OPTIONAL EFFECT OF SUNLIGH BY XENON ARC FOR 116 HRS. EQUIVALENT TO 16000 HRS GENERAL EXPOSURE- 21800.00 TENSILE STRENGTH AFTER EXPOSURE- 1300 SPECIMEN CHARGE - 500.00
Cl. 9, IS 12235 Part 7(Resistance to Sulphuric Acid)	-	2500.00	Test Charge-2000.00 SPECIMEN CHARGE- 500.00
Cl.10.1(When tested by method prescribed in IS 12235 (Part 9),the pipe shall have a true impact rate of not more than 10 percent. Mass of striker and height of fall shall be as per Annex A.)	-	1600.00	Test Charge- 1100.00 SPECIMEN CHARGE- 500.00
Cl.10.2(When determined in accordance with the method described in IS 12235 (Part 13), the tensile strength at break shall not be less than 45 MPa.)	-	1800.00	Test Charge- 1300.00 SPECIMEN CHARGE- 500.00
Cl.11.(Jointing of solvent cementing joints is to be carried out using solvent conforming to IS 14182. Apply a pressure of 0.05 MPa for a period of 15 min and there should be no leakage at any joint.)	-	1000.00	-
Cl.10.3(The axial shrinkage shall not exceed 2 percent when determined in accordance with Annex B.)	-	850.00	-
8.6(Effect on Water Test)	-	3000.00	-
Cl. 12, IS 12235 Part 11(Resistance to Di-Chloro-Methane)	-	1000.00	-
Cl.7.1(Outside Diameter at any point (Take 8 reading reported minimum, maximum))	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
Cl.7.1(Wall thickness "minimum,maximum" (Take 8 reading))	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
Cl.7.2(Pipes shall be supplied in nominal lengths of 2, 3, 4 or 6 metres either plain or with socket for solvent cementing/grooved socket. Tolerances on specified length shall be + 10 mm and – 0 mm.The nominal length of the pipe with socket for solvent cementing/grooved socket shall be as given in Fig. 1.)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
Cl.7.3.1(Minimum wall thickness of socket on pipes shall be as given in Table 2 read with Fig. 2 and Fig. 3.)	-	0.0	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
14(Marking)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.

24 Apr, 2027

-
-

12290

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 14333 (2022)

Polyethylene Pipes for Sewerage and Industrial Chemicals and Effluent ï¿½ Specification (First Revision)

PE63, PE 80, PE 100 SIZE- 16 TO 315 MM

41425.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.2(Colour- IS 14333-2022)	-	500.00	-
7.1(Visual Appearance- IS 14333-2022)	-	500.00	-
7.2(Length- IS 14333-2022)	-	500.00	ALL DIMENSION HAVE SINGLE CHARGE- 250.00
7.4,T3 of IS 4984(Outside Diameter-IS 4984-2016)	-	0.00	ALL DIMENSION HAVE SINGLE CHARGE- 500.00
7.4,T4 of IS 4984(wall Thickness-IS 4984-2016)	-	0.00	ALL DIMENSION HAVE SINGLE CHARGE- 500.00
7.4,T3 of IS 4984(Ovality-IS 4984-2016)	-	0.00	ALL DIMENSION HAVE SINGLE CHARGE- 500.00
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 27 oC , Test Period - 100 hrs.-IS 4984-2016 (Annexure-E))	-	4000.00	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 48 hrs.-IS 4984-2016 (Annexure-E))	-	1600.00	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 165 hrs.-IS 4984-2016 (Annexure-E))	-	4800.00	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 1000 hrs.-IS 4984-2016 (Annexure-E))	-	11000.00	-
8.1.2, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 48 hrs.-IS 4984-2016 (Annexure-E))	-	1600.00	-
8.2("Longitudinal Reversion Test - IS 4984-2016 (Annexure-F)")	-	1000.00	Test Charge- 700.00 SPECIMEN PREPARATION CHARGE- 500.00
8.3(Carbon black content- IS 2530-1963)	-	925.00	-
8.3(Carbon black content Dispersion- IS 2530-1963)	-	700.00	-
8.4(Melt Flow rate(Temperature - 190oC,Mass 5kg)-IS 2530-1963)	-	1100.00	-
8.5(Oxidation Induction Time -IS 4984:2016(Annexure-B))	-	2200.00	-
8.6(Density-IS 7328:2020)	-	700.00	-
8.7("Tensile Strength for Butt Fusion - IS 4984-2016 (Annexure-G)")	-	1800.00	Test Charge- 1300.00 SPECIMEN PREPARATION CHARGE- 500.00
8.8,T5("Tensile - IS 4984-2016 (Annexure-H)")	-	1800.00	Test Charge- 1300.00 SPECIMEN PREPARATION CHARGE- 500.00
8.9(Slow Crack Growth Rate{Internal Pressure creep Rupture test, Temperature - 80±1 oC , Test Pressure – 0.80MPa, Test Period - 500 hrs.-IS 4984-2016 (Annexure-E &J))	-	6000.00	Test Charge- 5500.00 SPECIMEN PREPARATION CHARGE- 500.00
5.2.1,T2("Base Density (At 27°C Temp.)-IS 7328:2020 ")	-	1325.00	Test Charge- 700.00 SPECIMEN PREPARATION CHARGE- 625.00
5.2.1,T2(Melt Flow Rate (At 190°C /5kg)-IS 2530:1963)	-	1100.00	-
5.2.1,T2(Thermal Stability(Oxidation Induction Time)-IS 4984:2016(Annexure-B))	-	2200.00	-
5.2.1,T2("Volatile Matter- IS 4984:2016 (Annexure-C)")	-	700.00	-
5.2.1,T2("Water Content-IS 4984:2016 (Annexure-D)")	-	700.00	-
5.2.1.1, T2(Compound Density-IS 7328:2020)	-	0.00	-
5.2.1.1, T2("Compound carbon black -IS 2530:1963 content")	-	0.00	-
5.2.1.1, T2(Compound Toluene extract - Any Method)	-	0.00	-
5.2.1.1, T2(Compound maximum volatile matter -IS 4984:2016 (Annexure-C))	-	0.00	-
5.2.1.1, T2(Compound carbon black particle size- Any Method)	-	0.00	-
5.2.1.1, T2(Compound ash content - Any Method)	-	0.00	-
5.2.1.1, T2("Compound carbon black -IS 2530:1963 dispersion")	-	0.00	-
5.3(Density of Higher olefin - IS 7328:2020)	-	0.00	-
5.3(Olefin Constituents- 14333-2022)	-	0.00	-
5.3(Loading of Carbon Black - IS 2530:1963)	-	0.00	-
5.3(Ash content- Any Method)	-	0.00	-
5.3(Toluene extract - Any Method)	-	0.00	-
5.3("Maximum volatile matter -IS 4984:2016 (Annexure-C)")	-	0.00	-
5.3(Carbon black particle size - Any Method)	-	0.00	-
5.4(Antioxidant - Any Method)	-	0.00	-
6(Pipe Description - IS 14333-2022)	-	0.00	-
7.3(Coiling- IS 14333-2022)	-	0.00	-
8.8,T5("Elongation -IS 4984-2016 (Annexure-H)")	-	0.00	-

24 Apr, 2027

-
-

12291

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

GRADE-PE63,PE80,PE100 SIZE- 16 TO 315 MM

44375.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.10(Slow Crack Growth Rate)	-	6000.00	Test Charge-5500.00 SPECIMEN PREPARATION CHARGE- 500.00
8.9 table-6(Elongation at Break)	-	1800.00	Test Charge-1300.00 SPECIMEN PREPARATION CHARGE- 500.00
8.8(Tensile Strength for Butt-fusion)	-	1800.00	Test Charge-1300.00 SPECIMEN PREPARATION CHARGE- 500.00
8.7(Density)	-	700.00	-
8.5 (Oxidation Induction Time)	-	2200.00	-
8.4( Melt Flow Rate)	-	1100.00	-
8.2(Longitudinal Reversion Test)	-	1200.00	Test Charge-700.00 SPECIMEN PREPARATION CHARGE- 500.00
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	1600.00	-
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	21400.00	1. 100 HRS.- 4000.00 2.48 HRS.- 1600.00 3.165 HRS.- 4800.00 4. 1000 HRS. - 11000.00 TOTAL 21400.00
7.4.1.2(Ovality)	-	0.00	MOD , OVALITY & THICKNESS HAVE SINGLE CHARGE- 500.00
Cl-7.4(Mean Outside Diameter (For upto 50 mm take 8 reading, above 50mm take 6 reading & average will be reported))	-	750.00	MOD , OVALITY & THICKNESS HAVE SINGLE CHARGE- 500.00
7.2(Length)	-	0.00	-
6.2.1(6.1.1 Identification Stripes)	-	500.00	DIMENSION OF BLUE STRIPS HAVE ONE CHARGE- 500.00
6.2(Colour)	-	500.00	-
8.6(Overall migration)	-	2200.00	Test Charge-1700.00 SPECIMEN PREPARATION CHARGE- 500.00
8.3(Carbon black)	-	1625.00	-
5.2(Density)	-	700.00	Applicable on Raw material (Optional)
5.2(Volatile matter Content)	-	700.00	Applicable on Raw material (Optional)
5.2(MFI @ 1900C/5.0 Kg)	-	1100.00	Applicable on Raw material (Optional)
Clause 7.1(Visual Apperance)	-	500.00	-
Table-2 (iii, iv)(Thermal Stability (Oxidation Induction Time), Volatile Matter)	-	2200.00	Applicable on Raw material (Optional)
Cl. 8.3(Carbon Black Content)	-	925.00	-
Cl. 8.3(Carbon Black Dispersion)	-	700.00	-
5.2,T2(Melt Flow rate(Temperature - 190oC,Mass 5kg)-IS 2530-1963)	-	1100.00	Applicable on Raw material (Optional)
6.1.4(PIPE DESCRIPTION)	-	0.00	-
6.1.3 (PIPE DESCRIPTION)	-	0.00	-
6, 6.1.2(PIPE DESCRIPTION)	-	0.00	-
6, 6.1.1(PIPE DESCRIPTION)	-	0.00	-
6, 6.1(PIPE DESCRIPTION)	-	0.00	-
5.4(Anti oxydent)	-	0.00	-
5.3(e)(Carbon Black Master Batch)	-	0.00	-
5.3(d)(Carbon Black Master Batch)	-	0.00	-
5.3(c)(Carbon Black Master Batch)	-	0.00	-
5.3(b)(Carbon Black Master Batch)	-	0.00	-
5.3 (a)(Carbon Black Master Batch)	-	0.00	-
5.2(Polyethylene Resin)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
5, 5.1 table-1(MATERIALS)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
7()	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
5.3(Toluene Extract)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
Clause 7.3(Coiling)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
Clause 8.3(Carbon Black Dispersion)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
Clause 8.3(Carbon Black content)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
Clause 8.6(Overall migration (stimulate))	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
Clause 8.6(Overall migration (surface of material))	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
7.1(Visual Appearance)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
7.3(Coiling)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
8.7(Density-IS 7328:2020)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
8.7(Corrected Density- IS 7328:2020)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
8.9,T6("Tensile - IS 4984-2016 (Annexure-H)")	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
8.9,T6("Elongation -IS 4984-2016 (Annexure-H)")	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
Cl 8.3(Carbon Black Content)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
Cl 8.3(Carbon Black Dispersion)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.

24 Apr, 2027

-
-

12292

ADS LABTECH, GHAZIABAD

8178326

IS 694 (2010)

Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 v (Fourth Revision)

Single/Multi core, Cables/Cords, Rigid/Flexible, Copper

27400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
13(Cable code)	-	0	-
11.2(Legibility)	-	0	-
11.1(Durability)	-	0	-
11(Identification)	-	0	-
10.9(Additional ageing test (OU cables only) -HV test (at 60±3oC))	-	3500	-
10.4(Flammability test- Unaffected portion)	-	350	-
10.4(Flammability test-Burning after flame removal)	-	350	-
table 1 e) 3) (IR constant- max. Temp)	-	200	-
table 1 e) 3) (IR constant- Room temp )	-	200	-
table 1 e) 3) (Volume Resistivity - Maximum temp)	-	350	-
table 1 e) 3) (Volume Resistivity - Room temp )	-	350	-
10.2(HV (room temperature))	-	350	-
10.1(HV (water immersion))	-	500	-
10.1(HV (water immersion))	-	0	-
10.8(Smoke density rating)	-	2800	-
10.6(Halogen evolution)	-	2800	-
10.7(Temperature index)	-	1250	-
10.5(Oxygen index)	-	1250	-
Table 1 iii) d) 9)(Cold impact for sheath)	-	350	-
Table 1 iii) d) 8)(Cold bend for sheath)	-	350	-
Table 1 iii) c) 9)(Cold impact for insulation)	-	600	-
Table 1 iii) c) 8)(Cold bend for insulation)	-	600	-
Table 1(Category Code)	-	0	-
Table 1 iii) d) 7)(Thermal stability- Sheath )	-	200	-
Table 1 iii) c) 7)(Thermal stability- Insulation )	-	200	-
Table 1 iii) d) 6)(Hot deformation -Indentation depth - Sheath )	-	350	-
Table 1 iii) c) 6)(Hot deformation - Indentation depth- Insulation)	-	350	-
Table 1 iii) d) 5)(Heat shock-Sheath )	-	200	-
Table 1 iii) c) 5)(Heat shock-Insulation )	-	200	-
Table 1 iii) d) 4)(Cracks Observed)	-	0	-
Table 1 iii) d) 4)(Shrinkage- Sheath )	-	200	-
Table 1 iii) c) 4)(Cracks Observed)	-	0	-
Table 1 iii) c) 4)(Shrinkage-Insulation)	-	250	-
Table 1 iii) d) 2)(Loss of mass- Sheath )	-	800	-
Table 1 iii) c) 2)(Loss of mass- Insulation )	-	1800	-
Table 1 iii) d) 3)(Sheath- Elongation variation)	-	200	-
Table 1 iii) d) 3)(Sheath- TS variation)	-	200	-
Table 1 iii) d) 3)(Sheath- Elongation (After ageing))	-	800	-
Table 1 iii) c) 3)(Tensile strength (After ageing))	-	800	-
Table 1 iii) d) 1)(Sheath- Elongation (Without ageing))	-	0	-
Table 1 iii) d) 1)(Sheath -Tensile strength (Without ageing))	-	0	-
Table 1 iii) c) 3)(Elongation variation)	-	0	-
Table 1 iii) c) 3)(TS variation)	-	0	-
Table 1 iii) c) 3)(Elongation (After ageing))	-	800	-
Table 1 iii) c) 1)(Elongation (Without ageing))	-	200	-
Table 1 iii) c) 1)(Tensile strength (Without ageing))	-	200	-
(Cl. 18.1.4) (Cl. 19.1.5) (Cl. 20.1.4) (Cl. 22.1.4)(Colour of Sheath)	-	0	-
8.3(Thickness of Sheath)	-	200	-
5.2(Application )	-	0	-
5.3(Thickness of Insulation)	-	200	-
9.1(Ovality)	-	150	-
9(Overall dimensions)	-	150	-
10.11(Per sulphate test (for tinned Cu cable only))	-	350	-
4.2(Conductor resistance test)	-	350	-
4.1(Wrapping test (for Al))	-	150	-
4.1(Tensile test (for Al)- After Stranding)	-	150	-
4.1(Tensile test (for Al)-Before Stranding)	-	150	-
4.1(Annealing test (for copper))	-	250	-
12(CONSTRUCTION Core Identification)	-	0	-
8.1(Sheath Material )	-	0	-
7(Binder Tape)	-	0	-
6.2(Filler)	-	0	-
6.1(Filler)	-	0	-
5.1(Insulation)	-	0	-
4.4(Joints in Conductor)	-	0	-
12.0(Core identification)	-	0	-
4, IS 8130(Construction of conductor)	-	0	-
Table 2, IS 8130(No fo wire in a conductor)	-	0	-
8.3(Minimum thickness of Sheath)	-	0	-
8.3(Avarage thickness of Sheath)	-	0	-
5.3(Minimum thickness of insulation)	-	0	-
5.3(Avarage thickness of insulation)	-	0	-
Table 4(Copper purity test)	-	0	-

15 May, 2027

-
-

12293

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 14709 (1999)

N - Butyl acrylate - Specification

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl No. 3 C-5 and D-5 [ Table 1, Sl no.(i) ] Annex A(Assay)	-	2500	-
Cl No. 3 C-5 and D-5 [ Table 1, Sl no.(ii)] Annex B(Acidity (as acrylic acid))	-	1500	-
Cl No. 3 C-5 and D-5 [ Table 1, Sl no.(iii)] Ref to IS 8768(Colour)	-	2000	-
Cl No. 3 C-5 and D-5 [ Table 1, Sl no.(iv)] Ref to IS 2362(Water)	-	2000	-
Cl No. 3 C-5 and D-5 [ Table 1, Sl no.(v)] Annex C(Inhibitors (as Butyl Etherhydroquinone))	-	3000	-

31 Dec, 2026

-
included w.e.f.17.10.2024

12294

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING AND TECHNOLOGY (CIPET):CSTS-BHOPAL

8100534

IS 10151 (2019)

Polyvinyl chloride (Pvc) and its copolymers for its safe use in contact with foodstuffs, pharmaceuticals and drinking water - Specification (First Revision)

4150 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.5(Overall Migration, IS 9845)	-	2325	Cl. 3.4
4.3(Pigments and Colourants, IS 9833)	-	0	-
5.2(Marking)	-	0	-
4.4(Monomer content)	-	3000	Cl. no. 3.3.1

31 Dec, 2026

-
-

12295

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 14708 (1999)

Ethyl acrylate - Specification

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.0- Table -1, Sl no. 1(Assay, percent by mass, Annex A)	-	2500	-
3.0- Table -1, Sl no. 2(Acidity (as acrylic acid), percent by mass, Annex B)	-	1500	-
3.0- Table -1, Sl no. 3(Colour, Pt-Co scale, IS 8768)	-	2000	-
3.0- Table -1, Sl no. 4(Water, percent by mass, IS 2362)	-	2000	-
3.0- Table -1, Sl no. 5(Inhibitors (as methyl etherhydroquinone), ppm, Annex C)	-	3000	-

31 Dec, 2026

-
included w.e.f.15.10.2024

12296

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 14707 (1999)

Methyl acrylate - Specification

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3 - Table -1, Sl no. 1(Assay, percent by mass, Min, Annex A)	-	3000	-
3 - Table -1, Sl no. 2(Acidity (as acrylic acid),percent by mass, Max, Annex B)	-	1000	-
3 - Table -1, Sl no. 3(Colour, Pt-Co scale, Max, IS 8768)	-	2500	-
3 - Table -1, Sl no. 4(Water, percent by mass,Max, 2362)	-	2500	-
3 - Table -1, Sl no. 5(" Inhibitors (as methyl etherhydroquinone), ppm Max , Annex C ")	-	3000	-

31 Dec, 2026

-
included w.e.f.15.10.2024

12297

ADS LABTECH, GHAZIABAD

8178326

IS 398 : Part 2 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 2 aluminium conuuctors, galvanized steel - Reinforced (Third Revision)

Aluminium Conductors Galvanized Steel- Reinforced

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires Before Stranding)	-	350	Only upto 100 sqmm Rs. 10000/- up to and including 100 sqmm.
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires Before Stranding)	-	350	Only upto 100 sqmm Rs. 10000/- up to and including 100 sqmm.
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires After Stranding)	-	350	Only upto 100 sqmm Rs. 10000/- up to and including 100 sqmm.
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires After Stranding)	-	350	Only upto 100 sqmm Rs. 10000/- up to and including 100 sqmm.
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	250	Only upto 100 sqmm Rs. 10000/- up to and including 100 sqmm.
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	250	Only upto 100 sqmm Rs. 10000/- up to and including 100 sqmm.
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	250	Only upto 100 sqmm Rs. 10000/- up to and including 100 sqmm.
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	250	Only upto 100 sqmm Rs. 10000/- up to and including 100 sqmm.
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Outermost Layer)	-	250	Only upto 100 sqmm Rs. 10000/- up to and including 100 sqmm.
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires Before Stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to and including 100 sqmm.
13.3 Table 2 (mech)(Breaking Load of Steel Wires Before Stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to and including 100 sqmm.
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires After Stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to and including 100 sqmm.
13.3 Table 2 (mech)(Breaking Load of Steel Wires After Stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to and including 100 sqmm.
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to and including 100 sqmm.
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to and including 100 sqmm.
13.4.2 (elec)(Ductility by Elongation Test before stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to and including 100 sqmm.
13.4.2 (elec)(Ductility by Elongation Test after stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to and including 100 sqmm.
13.6 (elec)(Resistance test-Aluminium wire before Stranding)	-	750	Only upto 100 sqmm Rs. 10000/- up to and including 100 sqmm.
13.6 (elec)(Resistance test-Aluminium wire after stranding)	-	750	Only upto 100 sqmm Rs. 10000/- up to and including 100 sqmm.
13.7.2 (elec)(Uniformity of Zinc coating)	-	750	Only upto 100 sqmm Rs. 10000/- up to and including 100 sqmm.
13.7.2 (chem)(Mass of Zinc coating)	-	750	Only upto 100 sqmm Rs. 10000/- up to and including 100 sqmm.
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires After Stranding)	-	250	Only upto 100 sqmm Rs. 10000/- up to and including 100 sqmm.
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	250	Only upto 100 sqmm Rs. 10000/- up to and including 100 sqmm.
13.5.1 (elec)(Wrapping Test Aluminium Wires After Stranding)	-	250	Only upto 100 sqmm Rs. 10000/- up to and including 100 sqmm.
13.5.1 (elec)(Wrapping Test Aluminium Wires Before Stranding)	-	250	Only upto 100 sqmm Rs. 10000/- up to and including 100 sqmm.
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to and including 100 sqmm.
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to and including 100 sqmm.
13.3 Table 2 (elec)(Breaking Load of Steel Wires After Stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to and including 100 sqmm.
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires After Stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to and including 100 sqmm.
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires Before Stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to and including 100 sqmm.
10 (elec)(Stranding)	-	0	Only upto 100 sqmm Rs. 10000/- up to and including 100 sqmm.
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires After Stranding)	-	350	Only upto 100 sqmm Rs. 10000/- up to and including 100 sqmm.
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires Before Stranding)	-	350	Only upto 100 sqmm Rs. 10000/- up to and including 100 sqmm.
13.7.2 (chem)(Uniformity of Zinc coating)	-	750	Only upto 100 sqmm Rs. 10000/- up to and including 100 sqmm.

15 May, 2027

-
-

12298

TRUSTIN ANALYTICAL SOLUTIONS PRIVATE LIMITED, CHENNAI

6139136

IS 15354 : Part 1 (2018)

Single - Use medical examination gloves: Part 1 specification for gloves made from rubber latex or rubber solution (First Revision)

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1 & Table 2(Size code)	-	500	-
6.1 & Table 2(Minimum length (dimension l, Figure 1))	-	500	-
6.1 & Table 2(Width corresponding to Descriptive size (dimension w,Figure 1))	-	500	-
6.1 & Table 2(Minimum thickness (at locations shown in Figure 2))	-	500	-
6.1 & Table 2(Maximum thickness (at approximate centre of palm))	-	500	-
6.3.2 & Table 3(Minimum force at break before accelerated ageing)	-	1000	-
6.3.2 & Table 3(Minimum Elongation at break before accelerated ageing)	-	1000	-
6.3.3 & Table 3(Minimum force at break after accelerated ageing)	-	1000	-
6.3.3 & Table 3(Minimum Elongation at break after accelerated ageing)	-	1000	-
6.2(Watertightness)	-	1000	-

21 Jan, 2027

-
Included w.e.f 28.10.2025

12299

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 2785 (1979)

Specification for natural cheese (Hard Variety), processed cheese, processed cheese spread and soft cheese (First Revision)

Rs 3000/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.3.1 (Appearance)	-
3.3.2 (Odour and Flavour)	-
3.3.3 (Texture and Consistency)	-
3.3.4- Table 1-i (Moisture- Annex A)	-
3.3.4- Table 1-ii (Milk fat ( on dry basis)- Annex B)	-
3.3.4- Table 1-iii (Salt ( added sodium chloride)- Annex C)	-

-
Exclusion Lactose

12300

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 16232 (2014)

Iron fortified iodized salt (Double Fortified Salt) - Food grade - Specification

FOOD GRADE

11800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Description - Iron fortified iodized salt (Double fortified salt) shall be crushed crystalline solid; white or pale pink or light grey in colour, free from contamination with clay and other extraneous adulterants and impurities)	-
3.4 - Table 1 - i (Moisture - Annex A of IS 7224)	-
3.4 - Table 1 - ii (Water insoluble matter, on dry basis - A-4 of IS 253 )	-
3.4 - Table 1 - iii (Chloride content (as NaCl), on dry basis - A-4 of IS 253)	-
3.4 - Table 1 - iv (Matter insoluble in dilute HCl, on dry basis - Annex G)	-
3.4 - Table 1 - v (Matter soluble in water other than sodium chloride, on dry basis - A-6 of IS 253)	-
3.4 - Table 1 - vi (Iron content (as Fe) - Annex A)	-
3.4 - Table 1 - vii- a (Iodine content, Manufacturer’s level - Annex B)	-
3.4 - Table 1 - vii- b (Iodine content, Distribution channel including retail level - Annex B)	-
3.4 - Table 1 - viii - a (pH of 5 percent aqueous solution : For iron fortification through encapsulated ferrous fumarate - Annex C)	-
3.4 - Table 1 - ix (Sulphate (as SO4) - A-8 of IS 253)	-
3.4 - Table 1 - x (Magnesium (as Mg), water soluble - A-7 of IS 253)	-
3.4 - Table 1 - xi - a (Phosphorous (as P2O5) - For iron fortification through encapsulated ferrous fumarate - Annex D)	-
3.4 - Table 1 - xii (Sodium hexa meta phosphate, on dry basis - Annex E)	-

-
Exclusion i)Phosphorous (as P2O5), mg/kg ii)Sodium hexa meta phosphate,

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number