BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

14026 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

12361

BIS, Northern Regional Laboratory (NRL)

None

IS 1264 (1997)

Brass gravity die castings - Specification (Fourth Revision)

1435.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.0 (Freedom from defects)	-
6.0 (Size)	-
6.0 (Mass)	-
9.0 (Pressure test)	-

-
Facility for Chemical tests not available

12362

BIS, Northern Regional Laboratory (NRL)

None

IS 6760 (1972)

Specification for slotted countersunk head wood screws

Rs.900.0 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1, Table 1 (Diameter of Unthreaded Shank d, Nominal)	-
3.1, Table 1 (Diameter of Unthreaded Shank d, maximum)	-
3.1, Table 1 (Diameter of Unthreaded Shank d, Minimum)	-
3.1, Table 1 (V*)	-
3.1, Table 1 (Pitch)	-
3.1, Table 1 (Diameter of Head, D, Maximum)	-
3.1, Table 1 (Diameter of Head, D, Minimum)	-
3.1, Table 1 (Depth of Head c†, maximum)	-
3.1, Table 1 (Depth of Head c†, minimum)	-
3.1, Table 1 (Width of Slot s, maximum)	-
3.1, Table 1 (Width of Slot s, minimum)	-
3.1, Table 1 (Depth Slot n‡, Maximum)	-
3.1, Table 1 (Depth Slot n‡, Mainimum)	-

-
-

12363

BIS, Northern Regional Laboratory (NRL)

None

IS 274 : Part 1 and 2 (1981)

Specification for shovels: Part 1 genral purpose shovels: Part 2 heat - Treated shovels (Third Revision)

Rs 600/, Rs 675/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5 Table-1,2 (Shape)	-
5 Table-1,2 (Dimensions- A)	-
5 Table-1,2 (Dimensions- B)	-
5 Table-1,2 (Dimensions- C)	-
5 Table-1,2 (Dimensions- D)	-
5 Table-1,2 (Dimensions- E)	-
5 Table-1,2 (Dimensions- G)	-
5 Table-1,2 (Dimensions- H)	-
5 Table-1,2 (Dimensions- K)	-
5 Table-1,2 (Dimensions- L)	-
6.1 (Blade thickness)	-
7.0 (Mass)	-
8.0 (Manufacture)	-
8.0 (Manufacture)	-
8.0 (Manufacture)	-
9.1 (Handles)	-
9.3 (Handles)	-
11.0 (Workmanship & Finish )	-
12.0 (Preservative Treatment )	-
4.1 (Sulphur)	-
4.1 (Phosphorus)	-

-
Excluding Microalloying Elements

12364

BIS, Guwahati Branch Laboratory (GBL)

None

IS 4990 (2011)

Plywood for concrete shuttering works - Specification (Third Revision)

Rs 11950/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.0 (Types)	-
7.2 (DIMENSIONS & TOLERANCES )	-
7.2 (DIMENSIONS & TOLERANCES )	-
7.3 (DIMENSIONS & TOLERANCES )	-
7.4 (DIMENSIONS & TOLERANCES )	-
7.4 (DIMENSIONS & TOLERANCES )	-
8.1 (WORKMANSHIP AND FINISH )	-
8.3 (WORKMANSHIP AND FINISH )	-
10.1.1 (MOISTURE CONTENT)	-
10.1.2, 10.1.2.1 (Table-1) (GLUE ADHESION IN DRY STATE)	-
10.1.2, 10.1.2.2 (GLUE ADHESION IN DRY STATE)	-
10.1.3, 10.1.3.1.1 (Table-1) (RESISTANCE TO WATER TEST)	-
10.1.3, 10.1.3.1.2 (RESISTANCE TO WATER TEST)	-
10.1.4 (RESISTANCE TO WATER TEST)	-
10.1.5 (MYCOLOGICAL TEST )	-
10.1.5, 10.1.5.1 (Table-1) (MYCOLOGICAL TEST )	-
10.1.5.2 (MYCOLOGICAL TEST )	-
Cl. 10.1.6 (Cl. 10.1.6 (Tensile Strength: Parallel to grain))	-
10.1.7 (Table-2) (STATIC BENDING STRENGTH)	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Elasticity: Along the Face Grain: Average))	-
10.1.8 (Table-3) (WET BENDING STRENGTH)	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Elasticity: Along the Face Grain: Average))	-
12, 12.1 (MARKING)	-
12, 12.2 (MARKING)	-
Cl. 10.1.6 (Cl. 10.1.6 (Tensile Strength: Perpendicular to grain))	-
Cl. 10.1.6 (Cl. 10.1.6 (Tensile Strength: Sum of the Tensile Strength in two directions))	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Elasticity: Along the Face Grain: Minimum Individual))	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Elasticity: Across the Face Grain: Average))	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Elasticity: Across the Face Grain: Minimum Individual))	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Rupture: Along the Face Grain: Average))	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Rupture: Along the Face Grain: Minimum Individual))	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Rupture: Across the Face Grain: Average))	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Rupture: Across the Face Grain: Minimum Individual))	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Elasticity: Along the Face Grain: Minimum Individual))	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Elasticity: Across the Face Grain: Average))	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Elasticity: Across the Face Grain: Minimum Individual))	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Rupture: Along the Face Grain: Average))	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Rupture: Along the Face Grain: Minimum Individual))	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Rupture: Across the Face Grain: Average))	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Rupture: Across the Face Grain: Minimum Individual))	-
cl. 10.1.2.1 (glue adhesion in dry state - glue shear strength - AVERAGE)	-
cl. 10.1.2.1 (glue adhesion in dry state - glue shear strength - WOOD FAILURE, Average)	-
cl. 10.1.3.1 (resistance to water test - glue shear strength - AVERAGE)	-
cl. 10.1.3.1 (resistance to water test - glue shear strength - WOOD FAILURE, Average)	-
cl. 10.1.5.1 (mycological test - glue shear strength - AVERAGE)	-
cl. 10.1.5.1 (mycological test - glue shear strength - WOOD FAILURE, Average)	-
10.1.9(Chem) (RETENTION OF PRESERVATIVE)	-

-
-

12365

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 3802 (2019)

Roasted coffee - Chicory powder - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Annex E of IS 3077 (Moisture, percent by mass, Max)	-
Annex F of IS 3077 (Total ash, percent by mass (on dry basis))	-
Annex G of IS 3077 (Acid insoluble ash (on dry basis), percent by mass, Max)	-
Annex K of IS 3077 (Water soluble matter (on dry basis), percent by mass)	-
Annex L of IS 3077 (Caffeine (on dry basis), percent by mass, Min)	-
Clause 15 of IS 1699 (Copper, ppm, Max)	-

-
Exclsuion i)Caffeine (on dry basis)

12366

BIS, Northern Regional Laboratory (NRL)

None

IS 2039 : Part 1 to 3 (1991)

Steel tubes for bicycle and cycle rickshaws - Specification (Second Revision)

Rs.4320.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 6.1 (Workmanship)	-
Cl. 6.2 (Fin Height)	-
Cl. 6.3 (Straightness)	-
Cl. 8.1 (Tensile Strength)	-
Cl. 8.1 (Yield Strength)	-
Cl. 8.1 (Elongation)	-
Cl. 8.2 (Drift Expansion Test- IS 2335)	-
Cl. 8.3 (Flattening Test-IS 2338)	-
Cl. 9 (Diameter)	-
Cl. 9 (Thickness)	-
Cl. 3.2.1, Table 4 (Yield Stress)	-
Cl. 3.2.1, Table 4 (UTS)	-
Cl. 3.2.1, Table 4 (Elongation)	-
Cl. 3.2.2, Table 2 (Drift Expansion Test- IS 2335)	-
Cl. 3.2.3, Table 3 (Flattening Test-IS 2338)	-
Cl. 4.2.1 (Diameter)	-
Cl. 4.2.2 (Thickness)	-
Cl. 4.2.3 (Length)	-
Cl. 4.2.1, Table 7 (Yield Stress)	-
Cl. 4.2.1, Table 7 (UTS)	-
Cl. 4.2.1, Table 7 (Crushing)	-
Cl. 4.2.2, Table 8 (Drift Expansion Test- IS 2335)	-
Cl. 4.2.3, Table 9 (Flattening Test-IS 2338)	-
Cl. 5.2.1, Table 10 (Diameter)	-
Cl. 5.2.2 (Mean Thickness)	-
Cl. 5.2.3, Table 6 (Length)	-
Cl. 5.1 Table 1 (Carbon)	-
Cl. 3.1 (Sulphur)	-
Cl. 3.1 (Phosphorous)	-
Cl. 3.1 (Manganese)	-
Cl. 3.1 (Silicon)	-

-
-

12367

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 10116 (2015)

Boric acid - Specification (First Revision)

Please see remarks View breakup
Testing Charge for Boric Acid- a) Special Quality (SQ) Grade= 13.25x300+10x9+700 =Rs. 4765/-= Rs. 4800/- (Rounded off) Testing Charge for Boric Acid- b) Technical (TECH) Grade= 5.25x300+9x9+300 =Rs. 1956/-= Rs. 2000/- (Rounded off) Testing Charge for Boric Acid- c) Explosive Grade= 6.25x300+9x9+350 =Rs. 2306/-= Rs. 2300/- (Rounded off)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2, 4.3, 4.4, Table 1 (Boric acid (as H3BO3 ))	-
4.2, 4.3, 4.4, Table 1 (Water insoluble matter)	-
4.2, 4.3, 4.4, Table 1 (Heavy metals (as Pb))	-
4.2, 4.3, 4.4, Table 1 (Iron (as Fe))	-
4.2, 4.3, 4.4, Table 1 (Ca)	-
4.2, 4.3, 4.4, Table 1 (Na)	-
4.2, 4.3, 4.4, Table 1 (Cl)	-
4.2, 4.3, 4.4, Table 1 (Sulphate (as SO4 ))	-
4.2, 4.3, 4.4, Table 1 (Phosphate (PO4 ))	-
4.5 (Additional Requirement for Technical Grade Boric Acid)	-
4.2, 4.3, 4.4, Table 1 (Moisture)	-
4.2 ( Description)	-

-
Excluding Calcium in special grade

12368

BIS, Northern Regional Laboratory (NRL)

None

IS 5135 : Part 2 (1994)

Specification for hand rotary duster: Part 2 shoulder mounted type (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.0 (Capacity)	-
8.0 (WORKMANSHIP AND FINISH)	-

-
-

12369

BIS, Northern Regional Laboratory (NRL)

None

IS 4366 : Part 2 (1985)

Specification for agricultural tillage discs: Part 2 flat type (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.0 (HARDNESS)	-
5.1, Table 1 (Nominal size)	-
5.1, Table 1 (Thickness)	-
5.2, Table 2 (Dimension)	-
5.2, Table 2 (Tolerance)	-
6.0 (HOLE TYPES)	-
7.1 (Central Hole)	-
7.2 (Pitch Circle Diameter -)	-
7.3 (Fixing Holes)	-
7.4, Table 3 (Nominal Size)	-
7.4, Table 3 (Thickness)	-
7.4, Table 3 (Centre hole diameter)	-
7.4, Table 3 (Pitch circle diameter)	-
7.4, Table 3 (No. Of holes)	-
8.1 (distortion)	-
8.2 (eccentricity)	-
8.3 (thickness of the cutting edge)	-
8.4 (cutting edge of discs)	-
9.0 (DESIGNATION)	-
10.0 (WORKMANSHIP AND FINISH)	-

-
Test facility is complete

12370

BIS, Southern Regional Laboratory (SRL)

None

IS 2326 (1987)

Automatic Flushing Cisterns for Urinals (Other than Plastic Cisterns)

1275 incl endu test + material as per ISS View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.0 (NOMINAL SIZE)	-
4.2 (Cistern )	-
4.3 (Depth of Cistern Body)	-
4.4 (Siphonic Apparatus)	-
4.5 (Lid and Cover)	-
4.6 (Feeding Device -)	-
5.0 (FINISH)	-
6.1 (a) (Urinal Delivering capacity)	-
6.1 (b) (Flushing)	-
6.1 (c) (Discharge)	-

-
" 1 NO. Excluding except for material test,external threading, finish and endurance test

12371

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 252 (2013)

Caustic soda - Specification (Fourth Revision)

Rs 5100/- (for Lye & Solid) View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 (Form and Description)	-
Cl. 3.3 and 3.4(Table 1, S. no i) (Sodium carbonate (as Na2CO3), percent by mass)	-
Cl. 3.3 and 3.4(Table 1, S. no ii) (Sodium hydroxide (as NaOH), percent by mass)	-
Cl. 3.3 and 3.4(Table 1, S. no iii) (Chlorides (as Cl– ), percent by mass)	-
Cl. 3.3 and 3.4(Table 1, S. no iv) (Sulphates (as SO4), percent by mass)	-
Cl. 3.3 and 3.4(Table 1, S. no v) (Silicates (as SiO2), percent by mass)	-
Cl. 3.3 and 3.4(Table 1, S. no vi) (Iron (as Fe))	-
Cl. 3.3 and 3.4(Table 1, S. no vii) (Copper)	-
Cl. 3.3 and 3.4(Table 1, S. no viii) (Manganese)	-
Cl. 3.3 and 3.4(Table 1, S. no ix) (Chlorates and per-chlorates)	-
Cl. 3.3 and 3.4(Table 1, S. no x) (Matter insoluble water, percent by mass)	-
Cl. 3.3 and 3.4(Table 1, S. no xii) (Sodium hydroxide)	-
Cl. 3.3 and 3.4(Table 1, S. no xi) (Total mercury)	-

-
-

12372

BIS, Northern Regional Laboratory (NRL)

None

IS 5135 : Part 1 (1994)

Specification for hand - Rotary duster: Part 1 belly - Mounted type (Second Revision)

Testing charges for the product are Rs 7600/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.0 (Capacity)	-
8.0 (WORKMANSHIP AND FINISH)	-

-
Test facility not availabe

12373

BIS, Northern Regional Laboratory (NRL)

None

IS 2326 (1987)

Automatic Flushing Cisterns for Urinals (Other than Plastic Cisterns)

1275 incl endu test + material as per ISS View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.0 (NOMINAL SIZE)	-
4.2 (Cistern )	-
4.3 (Depth of Cistern Body)	-
4.4 (Siphonic Apparatus)	-
4.5 (Lid and Cover)	-
4.6 (Feeding Device -)	-
5.0 (FINISH)	-
6.1 (a) (Urinal Delivering capacity)	-
6.1 (b) (Flushing)	-
6.1 (c) (Discharge)	-

-
Complete for Chemical, test facility not available for mechanical

12374

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 1065 : Part 1 (2019)

Stable bleaching powder - Specification: Part 1 household and industrial use (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.2 (Description)	-
5.3 Table-1 i (Available chlorine)	-
5.3 Table-1 ii (Stability, loss of Chlorine on the basis of initial available chlorine )	-
5.3 Table-1 iiii (Moisture, percent by mass. )	-
5.3 Table-1 iv (Particle size (Passing through 170 mm IS Sieve). Percent by mass)	-
Clause 5.4 (Keeping Quality )	-

-
-

12375

BIS, Central Laboratory (CL)

None

IS 366 (1991)

Electric iron - Specification (Fourth Revision)

Rs.12300/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.0 (Classification (as per Cl.6 of IS 302-2-3 and Cl.6.1 of IS 302-1))	-
7.0 (Classification (as per Cl.6 of IS 302-2-3 and Cl.6.2 of IS 302-1))	-
9.0 (Protection against access to live parts (as per Cl. 8 of IS 302-2-3 and IS 302-1))	-
9.0 (Power input and current (as per Cl. 10 of IS 302-2-3 and IS 302-1))	-
9.0 (Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-
9.0 (Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-
9.0 (Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-
9.0 (Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-
9.0 (Leakage current and Electric Strength at Operating Temperature (as per Cl. 13 of IS 302-2-3 and IS 302-1))	-
9.0 (Leakage current and Electric Strength at Operating Temperature (as per Cl. 13 of IS 302-2-3 and IS 302-1))	-
9.0 (Moisture Resistance (as per of Cl.15 of IS 302-2-3 and IS 302-1))	-
9.0 (Moisture Resistance (as per of Cl.15 of IS 302-2-3 and IS 302-1))	-
9.0 (Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-
9.0 (Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-
9.0 (Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-
9.0 (Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-
9.0 (Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-
9.0 (Staibilty and mechanical hazards (as per of Cl.20 of IS 302-2-3 and IS 302-1) )	-
9.0 (Mechanical strength (as per of Cl.21 of IS 302-2-3 and IS 302-1) )	-
9.0 (Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-
9.0 (Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-
9.0 (Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-
9.0 (Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-
9.0 (Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-
9.0 (Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-
9.0 (Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-
9.0 (Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-
9.0 (Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-
9.0 (Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-
9.0 (Components (as per of Cl.24 of IS 302-2-3 and IS 302-1) )	-
9.0 (Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-
9.0 (Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-
9.0 (Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-
9.0 (Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-
9.0 (Terminals for external conductors (as per of Cl.26 of IS 302-2-3 and IS 302-1) )	-
9.0 (Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-
9.0 (Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-
9.0 (Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-
9.0 (Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-
9.0 (Screw and connections (as per of Cl.28 of IS 302-2-3 and IS 302-1))	-
9.0 (Screw and connections (as per of Cl.28 of IS 302-2-3 and IS 302-1))	-
9.0 (Clearances, creepage distances and solid insulation (as per of Cl.29 of IS 302-2-3 and IS 302-1))	-
9.0 (Clearances, creepage distances and solid insulation (as per of Cl.29 of IS 302-2-3 and IS 302-1))	-
9.0 (Resistance to Heat and Fire (as per of Cl.30 of IS 302-2-3 and IS 302-1))	-
9.0 (Resistance to Rusting (as per of Cl.31 of IS 302-2-3 and IS 302-1))	-
10.0 (Measurement of Heating up time)	-
10.0 (Measurement of Heating up time)	-
11.0 (Measurement of sole plate temperature)	-
11.0 (Measurement of sole plate temperature)	-
11.0 (Measurement of sole plate temperature)	-
11.0 (Measurement of sole plate temperature)	-
12.0 (Measurement of Tempearture Distribution)	-
13.0 (Measurement of Initial overswing temperature and Heating up excess temperature)	-
13.0 (Measurement of Initial overswing temperature and Heating up excess temperature)	-
14.0 (Measurement of Cyclic fluctuation of temperature of hottest point )	-
16.0 (Measurement of Thermostatic staibility)	-
16.0 (Measurement of Thermostatic staibility)	-
16.0 (Measurement of Thermostatic staibility)	-
16.0 (Measurement of Thermostatic staibility)	-
16.0 (Measurement of Thermostatic staibility)	-
9.0 (Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-
9.0 (Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-
6 (Measurement of Thermostatic staibility)	-

-
Exclusion : except Cordless Iron & Electronic circuit type iron(Cl.19.11 of IS 302 part 1), Steam iron with water reservoir

12376

BIS, Northern Regional Laboratory (NRL)

None

IS 513 : Part 1 (2016)

Cold reduced carbon steel sheet and strip: Part 1 cold forming and drawing purpose (Sixth Revision)

Rs.8850/- Excluding Tensile Strain Hardening component View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8 (Mechanical and Physical Properties)	-
Cl 8 (UTM)	-
Cl 9 (Workmanship)	-
Cl 10 (Workmanship)	-
Cl 11 (Length, Width & Thickness)	-
7.0 (CARBON)	-
7.0 (SULPHUR)	-
7.0 (SILICON)	-
7.0 (MANGANESE)	-
7.0 (PHOSPHORUS)	-
7.0 (NITROGEN)	-
Cl. 11 (Out of square)	-
Cl. 11 (Flatness)	-
Cl. 11 (Camber)	-
Cl. 11 (Width)	-
Cl. 11 (Thickness)	-
Cl. 8.4 (Bend Test)	-
Cl. 8.3 Table 6 (Hardness Test ( Only for CR0 & CR1))	-
Cl. 8.1 & Table 5A, 5B & 5C (Elongation at 80 mm gauge length)	-
Cl. 8.1 & Table 5A, 5B & 5C (Elongation at 50 mm gauge length)	-
Cl. 8.1 & Table 5A, 5B & 5C (Yield Stress)	-
Cl. 9 Table 8 (Surface roughness)	-
7.0 (ALUMINIUM)	-
7.0 (MICRO ALLOYS)	-

-
Excluding Finish (9.5),

12377

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 15410 (2003)

Containers for packaging of natural mineral water and packaged drinking water - Specification

5850 View breakup
Total charges = Rs.5850.00 Testing charges for material shall be levied as per relevant ISS.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.6.2 (TRANSPARANCY)	-
4.6.3 (LEAKAGE TEST)	-
4.6.4 (DROP TEST)	-
4.6.6 (PORTABILITY TEST)	-
4.6.6 (chem) (Water Potability test (after 30 days) (a) Taste (b) Odour)	-
4.6.4, clause 8 of IS:2798:1998 (Drop test )	-
4.6.3, clause 6 of IS:2798:1998 (Leakage test- c. Air pressure leakage)	-
4.6.3, clause 6 of IS:2798:1998 (Leakage test- b. Vibration leakage)	-
4.6.3, clause 6 of IS:2798:1998 (Leakage test- a. Closure leakage )	-
4.6.2.1, Annex A (Transparency (Blue tint in polycarbonate & PET containers of 5 litre and above capacity))	-
4.6.2 Annex A (Transparency)	-
4.5, IS:2798:1998 (Wall thickness- Bottom, in mm)	-
Cl. 4.5 (Cl. 4.5 Wall Thickness (Middle))	-
Cl. 4.5 (Cl. 4.5 Wall Thickness (Top))	-
Cl. 4.4 (a) (Capacity)	-
4.3 (Workmanship, Finish & Appearance)	-
4.2 (Design, Shape & Dimension )	-
Cl. 4.5 (Cl. 4.5 Wall Thickness (Bottom))	-
Cl. 4.5 (Cl. 4.5 Wall Thickness (Middle))	-
Cl. 4.5 (Cl. 4.5 Wall Thickness (Top))	-
Cl. 4.4 (a) (Capacity)	-
Cl. 4.3.2 (Cl. 4.3.2 Finish & Appearance)	-
Cl. 4.2 (Cl. 4.2 Design, Shape & Dimension)	-
Cl. 4.6.3 (Cl. 4.6.3 Air Pressure Leakage)	-
Cl. 4.6.3 (Cl. 4.6.3 Vibration Leakage)	-
Cl. 4.6.3 ( Cl. 4.6.3 Closure Leakage)	-
4.6.2.1, Annex-A (Transparency of container)	-
4.6.5.1 (chem) (Colour migration (Caps))	-
4.6.5.1 (chem) (Colour migration (Container))	-
4.6.5 , IS:9845:1998 (chem) (Migration of Caps - a. Amount of extractive)	-
4.6.5 , IS:9845:1998 (chem) (Migration- b. Amount of extractive)	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (i) (Barium)	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (ii) (Cobalt)	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (iii) (Copper)	-
CL 4.6.7.2 and 4.6.7.3, Table 3 (iv) (Iron)	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (v) (Lithium)	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (vi) (Manganese)	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (vii) (Zinc)	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (viii) (Antimony)	-

-
Test facility not available for Pthalates

12378

BIS, Northern Regional Laboratory (NRL)

None

IS 739 (1992)

Wrought aluminium and aluminium alloys - Wire for general engineering purposes - Specification (Third Revision)

Rs.225/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.0 (Freedom from defects)	-
7.0 (Dimension and Tolerances)	-
9.1 (Tensile Strength)	-
9.3 (Wrapping Test)	-
6.0 (Freedom from defects)	-
15.4 (b) (Cold impact)	-
9.1 (PIPE ENDS)	-
6.0 (Freedom from defects)	-
15.4 (b) (Cold impact)	-
9.1 (PIPE ENDS)	-

-
Facility for Chemical tests not available

12379

BIS, Northern Regional Laboratory (NRL)

None

IS 4366 : Part 1 (1985)

Specification for agricultural tillage discs: Part 1 concave type (Second Revision)

Rs 675/- View breakup
material test as per IS:9442

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.0 (MATERIAL)	-
5.0 (HARDNESS)	-
6.1, Table 1 (Nominal Size)	-
6.1, Table 1 (Thickness)	-
6.1, Table 1 (Concavity)	-
6.2, Table 2 (DISC SIZE)	-
6.2, Table 2 (EQUALLY SPACED NOTCH NUMBERS)	-
6.2, Table 2 (Notch Width)	-
6.2, Table 2 (Notch depth)	-
6.3, Table 3 (A)	-
6.3, Table 3 (M)	-
6.3, Table 3 (N)	-
6.3, Table 3 (P)	-
6.4 (Dimension)	-
7.0 (HOLE TYPES)	-
8.1 (Centre Square Hole)	-
8.2 (Circular Centre Hole with Keyway)	-
8.3 (Several Fixing Holes With or Without Circular Centre Hole)	-
9.1 (eccentricity and wobble)	-
9.2 (permanent deflection)	-
9.4 (thickness of the cutting edge)	-
8.4, Table 5 (DISC SIZE)	-
8.4, Table 5 (CENTRE SQUARE HOLE SIZE)	-
8.4, Table 5 (CENTRE Circular HOLE SIZE)	-
8.4, Table 5 (With bolt fixing, Centre hole diameter)	-
8.4, Table 5 (With bolt fixing, Pitch Circle Diameter)	-
8.4, Table 5 (With bolt fixing, Fixing hole size)	-
8.4, Table 5 (With bolt fixing, No. Of holes)	-
8.4, Table 5 (With rivet fixing, Centre hole diameter)	-
8.4, Table 5 (With rivet fixing, Pitch Circle Diameter)	-
8.4, Table 5 (With bolrivet fixing, Fixing hole size)	-
8.4, Table 5 (With rivet fixing, No. Of holes)	-
9.1, Table 6 (Nominal size)	-
9.1, Table 6 (ECCENTRICITY)	-
9.1, Table 6 (Wobble)	-
9.5 (cutting edge of the disc)	-
9.6 (Radius of concavity)	-
9.7 (Square holes)	-
9.8 (crown of the keyway)	-
9.9 (fixing holes)	-
10.0 (DESIGNATION)	-
11.0 (WORKMANSHIP AND FINISH)	-

-
Test facility is complete

12380

BIS, Southern Regional Laboratory (SRL)

None

IS 2039 : Part 1 to 3 (1991)

Steel tubes for bicycle and cycle rickshaws - Specification (Second Revision)

Rs.4320.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 6.1 (Workmanship)	-
Cl. 6.2 (Fin Height)	-
Cl. 8.1 (Tensile Strength)	-
Cl. 8.1 (Yield Strength)	-
Cl. 8.1 (Elongation)	-
Cl. 8.2 (Drift Expansion Test- IS 2335)	-
Cl. 8.3 (Flattening Test-IS 2338)	-
Cl. 9 (Diameter)	-
Cl. 9 (Thickness)	-
Cl. 3.2.1, Table 4 (Yield Stress)	-
Cl. 3.2.1, Table 4 (UTS)	-
Cl. 3.2.1, Table 4 (Elongation)	-
Cl. 3.2.2, Table 2 (Drift Expansion Test- IS 2335)	-
Cl. 3.2.3, Table 3 (Flattening Test-IS 2338)	-
Cl. 4.2.1 (Diameter)	-
Cl. 4.2.2 (Thickness)	-
Cl. 4.2.3 (Length)	-
Cl. 4.2.1, Table 7 (Yield Stress)	-
Cl. 4.2.1, Table 7 (UTS)	-
Cl. 4.2.2, Table 8 (Drift Expansion Test- IS 2335)	-
Cl. 4.2.3, Table 9 (Flattening Test-IS 2338)	-
Cl. 5.2.1, Table 10 (Diameter)	-
Cl. 5.2.2 (Mean Thickness)	-
Cl. 5.2.3, Table 6 (Length)	-

-
1.5mx2 Excluding except drift expansion test, Tensile Test ,chemical test

12381

BIS, Northern Regional Laboratory (NRL)

None

IS 737 (2008)

Wrought aluminium and aluminium alloy sheet and strip for general engineering purposes - Specification (Fourth Revision)

Rs 8750/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.0 (Freedom from defects)	-
7 Table-2 (Tensile Strength)	-
7 Table-2 (Elongation)	-
7 Table-2 (Bend Test)	-
9.1 (PIPE ENDS)	-
15.4 (b) (Cold impact)	-

-
Excluding Proof stress, Facility for Chemical tests not available

12382

BIS, Northern Regional Laboratory (NRL)

None

IS 16333 : Part 3 (2017)

Mobile phone handsets: Part 3 indian language support for mobile phone handsets - Specific requirements (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (Inputting of text)	-
5.2 (Message Readability)	-

-
Test facility is complete

12383

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING AND TECHNOLOGY (CIPET):CSTS-BHOPAL

8100534

IS 16008 : Part 2 (2016)

Agro textiles “ Shade nets for agriculture and horticulture purposes “ Specification Part 2 Shade nets made from mono filament yarns (first revision)

22760.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0(Material)	-	1050	Nil
4.1(HDPE Mono filament)	-	2500.00	Nil
4.1(HDPE Mono filament)	-	500.00	Nil
4.1.1(HDPE Mono filament)	-	700.00	Nil
4.2(Fabric)	-	500.00	Nil
4.3(Colour)	-	300.00	Nil
5.0(Types)	-	1000.00	Nil
6.1(Dimensions and mass)	-	250.00	Nil
6.2(Dimensions and mass)	-	250.00	Nil
6.2 Table 1(Mass g/m2,Min)	-	250.00	Nil
6.2 Table 1(Average breaking strength of shade nets fabric (Strip method,Warpway,Weftway 325 mm × 50 mm test piece with gauge length of 200 mm), N, Min )	-	2200.00	Nil
6.2 Table 1(Warpway Weftway)	-	2200.00	Nil
6.2 Table 1(Retention of breaking strength after UV exposure, N, Min)	-	8260.00	-
6.2 Table 1(Colour fastness to artificial light1)	-	850.00	Nil
6.2 Table 1(Bursting pressure, kgf/cm2, Min)	-	1000.00	Nil
6.2 Table 1(Shading %)	-	700.00	Nil

31 Dec, 2026

-
-

12384

BIS, Eastern Regional Laboratory (ERL)

None

IS 16415 (2015)

Composite cement - Specification

Rs.9150/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 -Table - 2 i (Insoluble residue - Cl 4.10 of IS 4032:1985)	-
6 -Table - 2 ii (Magnesia - Cl 4.8 of IS 4032:1985)	-
6 -Table - 2 iii (Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-
6 -Table - 2 iv (Sulphide sulphur (S) - Cl 6.12 of IS 4032:1985)	-
6 -Table - 2 v (Loss on ignition - Cl 4.2 of IS 4032:1985)	-
6 -Table - 2 vi (Chloride content - Cl 4.13 of IS 4032:1985)	-
7 and Table 3 i (Fineness IS 4031(Part 2))	-
7 and Table 3 ii a (Soundness, Le-Chate1ier expansion IS 4031(Part 3) )	-
7 and Table 3 ii b (Soundness, Autoclave expansion IS 4031(Part 3) )	-
7 and Table 3 iii a (Setting Time ( by Vicat Apparatus), Initial IS 4031(Part 5))	-
7 and Table 3 iii b (Setting Time ( by Vicat Apparatus ), Final IS 4031(Part 5))	-
7 and Table 3 iv a (Compretsive Strenqth .72 ± 1 hr IS 4031(Part 6))	-
7 and Table 3 iv b (Compretsive Strenqth 168 ± 2 hr IS 4031(Part 6))	-
7 and Table 3 iv c (Compretsive Strenqth 672 ± 4 hr IS 4031(Part 6))	-
7 and Table 3 v (Drying shrinkage IS 4031(Part 10))	-
Cl. 6.1,Table 2 (Alkali content)	-
7 and Table 3 vi (Transverse strength (optional) IS 4031(Part 8) )	-

-
Mech - Except Transverse Strength (optional), Chem-Declaration for chloride regarding end use of cement (as per Table 1) and declaration of fly ash content & Confirmation for testing Alkali Content required.

12385

BIS, Northern Regional Laboratory (NRL)

None

IS 808 (1989)

Dimensions for hot rolled steel beam, column, channel and angle sections (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7, 8, Table 2.1 (Mass)	-
7, 8, Table 2.1 (Dimensions, D)	-
7, 8, Table 2.1 (Dimensions, B)	-
7, 8, Table 2.1 (Dimensions, t)	-
7, 8, Table 2.1 (Dimensions, T)	-
7, 8, Table 2.1 (Dimensions, Flange Slope)	-
7, 8, Table 2.1 (Dimensions, R1)	-
7, 8, Table 2.1 (Dimensions, R2)	-
7, 8, Table 2.2 (Mass)	-
7, 8, Table 2.2 (Dimensions, D)	-
7, 8, Table 2.2 (Dimensions, B)	-
7, 8, Table 2.1 (Dimensions, t)	-
7, 8, Table 2.2 (Dimensions, T)	-
7, 8, Table 2.2 (Dimensions, Flange Slope)	-
7, 8, Table 2.2 (Dimensions, R1)	-
7, 8, Table 3.1 (Mass)	-
7, 8, Table 4.1 (Mass)	-
7, 8, Table 5.1 (Mass)	-
7, 8, Table 6.1 (Mass)	-
7, 8, Table 6.2 (Mass)	-
7, 8, Table 3.1 (Dimensions, D)	-
7, 8, Table 3.1 (Dimensions, B)	-
7, 8, Table 3.1 (Dimensions, T)	-
7, 8, Table 3.1 (Dimensions, Flange Slope)	-
7, 8, Table 3.1 (Dimensions, R1)	-
7, 8, Table 3.1 (Dimensions, R2)	-
7, 8, Table 4.1 (Dimensions, D)	-
7, 8, Table 4.1 (Dimensions, B)	-
7, 8, Table 4.1 (Dimensions, t)	-
7, 8, Table 4.1 (Dimensions, T)	-
7, 8, Table 4.1 (Dimensions, Flange Slope)	-
7, 8, Table 4.2 (Dimensions, R1)	-
7, 8, Table 4.1 (Dimensions, R2)	-
7, 8, Table 4.2 (Dimensions, D)	-
7, 8, Table 4.2 (Dimensions, B)	-
7, 8, Table 4.2 (Dimensions, t)	-
7, 8, Table 4.2 (Dimensions, T)	-
7, 8, Table 4.2 (Dimensions, R1)	-

-
Excluding Microalloying Elements

12386

BIS, Northern Regional Laboratory (NRL)

None

IS 4351 (2003)

Steel Door Frames -

Please see remarks. View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5, Table 1 (Mild steel sheet (cold rolled))	-
5, Table 1 (Galvanized steel sheets — Plain grade — Lock forming (GPL), Zinc coating 120 g/m2 inchssive of both sides)	-
5, Table 1 (Stainless steel Grade — X07Crl 7 (430) X04Cr19N;; (304 S1 ))	-
6.1 (Sizes)	-
6.3 (Designation)	-
7, Table 2 (Profile)	-
7, Table 2 (Size, X)	-
7, Table 2 (Size, Y)	-
7, Table 2 (Rebate)	-
8.0 (CONSTRUCTION)	-
9.0 (BASE TIES)	-
10.1 (Fixing Lugs (Holdfasts))	-
10.2, Table 3 (Steel butt hinge— medium weight)	-
10.2, Table 3 (Stainless steel butt hinges medium weight)	-
10.2, Table 3 (Non-ferrous metal butt hinges)	-
10.2, Table 3 (Mild steel parliament hinges)	-
10.2, Table 3 (Mild steel light weight tee hinges)	-
10.3 (Mortar Guards)	-
10.4 (Aldrops, Sliding Bolts and Tower Bolts)	-
10.5 (Lock Strike Plate)	-
10.6 (Shock Absorbers)	-

-
Excluding Microalloying Elements

12387

BIS, Eastern Regional Laboratory (ERL)

None

IS 15410 (2003)

Containers for packaging of natural mineral water and packaged drinking water - Specification

For all capacity

5850 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.6.2 (TRANSPARANCY)	-
4.6.3, clause 6 of IS:2798:1998 (Leakage test- a. Closure leakage )	-
4.6.3, clause 6 of IS:2798:1998 (Leakage test- c. Air pressure leakage)	-
4.6.4 (DROP TEST)	-
4.6.6 (PORTABILITY TEST)	-
4.6.3, clause 6 of IS:2798:1998 (Leakage test- b. Vibration leakage)	-
4.5, IS:2798:1998 (Wall thickness- Bottom, in mm)	-
4.5, IS:2798:1998 (Wall thickness- Middle , in mm)	-
4.5, IS:2798:1998 (Wall thickness- Top , in mm )	-
4.4 , clause 5 of IS:2798:1998 (Brimful capacity in ml)	-
4.3 (Workmanship, Finish & Appearance)	-
4.2 (Design, Shape & Dimension )	-
4.0 (chem) (MATERIAL)	-
Cl. 4.6.5 (chem) (Cl. 4.6.5 Overall migration (Caps))	-
4.6.5.1 (chem) (Colour migration (Caps))	-
4.6.5.1 (chem) (Colour migration (Container))	-
Cl. 4.6.5 (Overall migration for container)	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(i) (Specific migration for Cap,Barium)	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(ii) (Specific migration for Cap,Cobalt)	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(iii) (Specific migration for Cap,Copper)	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(iv) (Specific migration for Cap,Iron)	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(v) (Specific migration for Cap,Lithium)	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(vi) (Specific migration for Cap,Manganese)	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(vii) (Specific migration for Cap,Zinc)	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(viii) (Specific migration for Cap,Antimony)	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(ix) ("Specific migration for Cap,Phthalic acid, bis(2-ethylhexyl) ester (DEHP)")	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (i) (Barium)	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (ii) (Cobalt)	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (iii) (Copper)	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (iv) (Iron)	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (v) (Lithium)	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (vi) (Manganese)	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (vii) (Zinc)	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (viii) (Antimony)	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (ix) (Phthalic acid, bis(2-ethylhexyl) ester (DEHP))	-
4.1 (Material)	-
Cl. 4.6.5 (chem) (Cl. 4.6.5 Color migration (Caps))	-
Cl. 4.6.5 (Cl. 4.6.5 Migration)	-
4.6.5.1.b (Colour migration Test (Cap))	-
4.6.5.1.a (Colour migration Test (Container))	-
CL 4.6.7.2 and 4.6.7.3, Table 3 (i) (Barium)	-
CL 4.6.7.2 and 4.6.7.3, Table 3 (ii) (Cobalt)	-
CL 4.6.7.2 and 4.6.7.3, Table 3 (iii) (Copper)	-
CL 4.6.7.2 and 4.6.7.3, Table 3 (iv) (Iron)	-
CL 4.6.7.2 and 4.6.7.3, Table 3 (v) (Lithium)	-
CL 4.6.7.2 and 4.6.7.3, Table 3 (vi) (Manganese)	-
CL 4.6.7.2 and 4.6.7.3, Table 3 (vii) (Zinc)	-
CL 4.6.7.2 and 4.6.7.3, Table 3 (viii) (Antimony)	-
CL 4.6.7.2 and 4.6.7.3, Table 3 (ix) (Phthalic acid, bis(2-ethylhexyl) ester (DEHP))	-
4.1 (Material)	-
4.6.5 (Migration Test)	-
Clauses 5.3.9.2 and 5.3.9.3,Table 3, S.no.(ix) (Phthalic acid, bis(2-ethylhexyl)ester (DEHP)-ISO 18856)	-
Cl. 4.1 (Material test for container)	-
Cl. 4.6.5.1 (Colour migration for container)	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(i) (Specific migration for container,Barium)	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(ii) (Specific migration for container,Cobalt)	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(iii) (Specific migration for container,Copper)	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(iv) (Specific migration for container,Iron)	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(v) (Specific migration for container,Lithium)	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(vi) (Specific migration for container,Manganese)	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(vii) (Specific migration for container,Zinc)	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(viii) (Specific migration for container,Antimony)	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(ix) ("Specific migration for container,Phthalic acid, bis(2-ethylhexyl) ester (DEHP)")	-
Cl. 4.6.5 (Overall migration for Cap)	-
Cl. 4.6.5.1 (Colour migration for Cap)	-
5 (Marking)	-
5 (Packing and Marking)	-

-
Material test being done for PET only.

12388

BIS, Northern Regional Laboratory (NRL)

None

IS 7283 (1992)

Hot - Rolled bars for the production of bright bars and machined parts for engineering applications specification (First Revision)

Rs 1500/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 6 (Workmanship)	-
Cl 7 (Diameter & Out Of Round)	-
Cl 11 (Size)	-
Cl 6 (Workmanship)	-
5, 5.1, 5.2 (Chemical Composition - Carbon)	-
5, 5.1, 5.2 (Chemical Composition - Sulphur)	-
5, 5.1, 5.2 (Chemical Composition - Phosphorus)	-
5, 5.1, 5.2 (Chemical Composition - Manganese)	-
5, 5.1, 5.2 (Chemical Composition - Silicon)	-

-
Excluding Decarburization, Hardenability test, Inclusion rating and grain size, Microalloying Elements

12389

BIS, Northern Regional Laboratory (NRL)

None

IS 17048 (2018)

Halogen free flame retardant (HFFR) cables for working voltages up to and including 1 100 Volts - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1.1 a) (Conductor : Material )	-
4.1.1 b) (Material : Seperator tape )	-
4.1.1 d) , 11.1, 12.1, 13.1,14.1 (Class of conductor )	-
4.1.1 e) (Shape of conductor )	-
4.1.1 f) (Nominal size of conductor )	-
4.2.1, 11.2, 12.2, 13.2, 14.2 (Insulation : Material )	-
4.2.2, 11.2, 12.2, 13.2, 14.2 (Insulation : Application )	-
4.2.3,11.2, 12.2, 13.2 (Thickness of insulation - Avearge : IS 10810 ( Part 6 ))	-
4.2.3, 11.2, 12.2, 13.2, 14.2 (Thickness of insulation - miniumum : IS 10810 ( Part 6 ))	-
4.2.4 (Insulation : Tensile stregth ( Before ageing)-IS 10810 (Part 7) )	-
4.2.4 (Insulation : Elongation ( Before ageing) -IS 10810 (Part 7))	-
4.2.4 (Insulation : Tensile stregth ( After ageing) - IS 10810 (Part 7) )	-
4.2.5 (Insulation : Tensile stregth variation ( After ageing) - IS 10810 (Part 7) )	-
4.2.4 (Insulation : Elongation (after ageing) - IS 10810 (Part 7) )	-
4.2.5 (Insulation : Elongation variation (after ageing) - IS 10810 (Part 7) )	-
4.3 (Fillers)	-
4.4 (Binder Tape)	-
4.5.1,13.4, 14.4 (Sheath : Compound )	-
4.5.2, 13.4, 14.4 (Sheath : Application)	-
4.5.3,13.4, 14.4 (Thickness of sheath - Average : IS 10810 (Part 6))	-
4.5.3,13.4, 14.4 (Thickness of sheath - Minimum : IS 10810 (Part 6))	-
4.5.4, 13.4 (Sheath : Tensile stregth ( Before ageing)-IS 10810 (Part 7) )	-
4.5.4,13.4 (Sheath : Elongation ( Before ageing) -IS 10810 (Part 7))	-
4.5.5, 13.4,14.4 (Sheath : Elongation variation (after ageing) - IS 10810 (Part 7) )	-
4.5.5, 11.3, 12.3, 13.6, 14.6 (Overall Dimensions)	-
4.5.5.1, 11.3, 12.3,13.5, 14.5 (Ovality)	-
4.5.6, 13.4 (Colour of Sheath)	-
5.1 (High Voltage Test (at Room Temperature))	-
5.3 (Flammability Test- IS 10810 (Part 53).)	-
5.4 (Oxygen Index Test- IS 10810 (Part 58))	-
5.5 (Temperature Index-IS 10810 (Part 64).)	-
5.11 (Flame Retardant Test- IS 10810 (Part 61),)	-
5.12 (Hot Set Test- IS 10810 (Part 30).)	-
5.12 (Permanent Set - IS 10810 (Part 30).)	-
5.15 (Cold Bend Test-IS 10810 (Part 20).)	-
5.16 (Cold Impact Test- IS 10810 (Part 21).)	-
6.1, Table 1 (CORE IDENTIFICATION)	-
6.2 (Core Identification by Numbers)	-
6.2.2 (Durability)	-
7.0 (CABLE CODE)	-
9.0 ( IDENTIFICATION)	-
10.1 (Packing )	-
10.2 (marking)	-
10.2.1 (Standards marking)	-
13.3, 14.3 (assembly of cores )	-
5.6 (Smoke Density-IS 10810 (Part 63).)	-
4.5.4, 13.4, 14.4 (Sheath : Tensile stregth ( After ageing) - IS 10810 (Part 7) )	-
4.5.5, 13.4, 14.4 (Sheath : Tensile stregth variation ( After ageing) - IS 10810 (Part 7) )	-
4.5.4, 13.4, 14.4 (Sheath : Elongation (after ageing) - IS 10810 (Part 7) )	-
4.5.5, 13.4,14.4 (Sheath : Elongation variation (after ageing) - IS 10810 (Part 7) )	-
5.13 (Water Immersion Test (Effect of Water on Sheath) : Tensile strength -IS 10810 (Part 7).)	-
5.13 (Water Immersion Test (Effect of Water on Sheath) : Elogation -IS 10810 (Part 7).)	-

-
Excluding Except Assessment of halogen (Cl. 5.7), Water immersion test (Cl. 5.13)

12390

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING AND TECHNOLOGY (CIPET):CSTS-BHOPAL

8100534

IS 16008 : Part 1 (2016)

Agro textiles “ Shade nets for agriculture and horticulture purposes “ Specification Part 1 Shade nets made from tape yarns (first revision)

22760.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Types)	-	1000.00	Nil
6.1(Dimensions and Mass - IS 1954)	-	250	Nil
6.1(Dimensions and Mass - IS 1954)	-	250	Nil
6.2 Table 1(Mass - IS 1964)	-	250	Nil
6.2 Table 1(Average breaking strength of shade nets fabric (Strip method, 325 mm x 50 mm test piece with gauge length of 200 mm) - IS 1969 (Part 1))	-	2200	Nil
6.2 Table 1(Average breaking strength of shade nets fabric (Strip method, 325 mm x 50 mm test piece with gauge length of 200 mm) - IS 1969 (Part 1))	-	2200	Nil
6.2 Table 1(Retention of breaking strength after UV exposure - IS 1969 (Part 1))	-	8260	25% discount is not application in conditioning charges
6.2 Table 1(Colour fastness to artificial light, IS 2454)	-	850	Nil
6.2 Table 1(Bursting Pressure, IS 1966 (Part 1 or 2))	-	1000	Nil
6.2 Table 1(Shading Percentage)	-	700	Nil

31 Dec, 2026

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number