BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

14050 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

13021

BIS, Southern Regional Laboratory (SRL)

None

IS 3466 (1988)

Specification For Masonry Cement

Please see remarks. View breakup
Rs. 7350/- excluding chemical tests.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 Table 1 i (Fineness IS : 4031:1988)	-
3.1 Table 1 i (Fineness IS : 4031:1988)	-
3.1 Table 1 ii a (Setting Time ( by Vicat Apparatus ),Initial IS : 4031:1988)	-
3.1 Table 1 ii a (Setting Time ( by Vicat Apparatus ),Initial IS : 4031:1988)	-
3.1 Table 1 ii a (Setting Time ( by Vicat Apparatus ),Initial IS : 4031:1988)	-
3.1 Table 1 ii a (Setting Time ( by Vicat Apparatus ),Initial IS : 4031:1988)	-
3.1 Table 1 ii a (Setting Time ( by Vicat Apparatus ),Initial IS : 4031:1988)	-
3.1 Table 1 ii b (Setting Time ( by Vicat Apparatus ), Final IS : 4031:1988)	-
3.1 Table 1 ii b (Setting Time ( by Vicat Apparatus ), Final IS : 4031:1988)	-
3.1 Table 1 iii a (Soundness, Le-Chate1ier expansion IS 4031:1988)	-
3.1 Table 1 iii a (Soundness, Le-Chate1ier expansion IS 4031:1988)	-
3.1 Table 1 iii b (Soundness, Autoclave expansion IS 4031:1988)	-
3.1 Table 1 iii b (Soundness, Autoclave expansion IS 4031:1988)	-
3.1 Table 1 iv (Compretsive Strenqth 7 days IS 4031:1988)	-
3.1 Table 1 iv (Compretsive Strenqth 7 days IS 4031:1988)	-
3.1 Table 1 iv (Compretsive Strenqth 7 days IS 4031:1988)	-
3.1 Table 1 iv (Compretsive Strenqth 7 days IS 4031:1988)	-
3.1 Table 1 iv (Compretsive Strenqth 28 days IS 4031:1988)	-
3.1 Table 1 iv (Compretsive Strenqth 28 days IS 4031:1988)	-
3.1 Table 1 iv (Compretsive Strenqth 28 days IS 4031:1988)	-
3.1 Table 1 iv (Compretsive Strenqth 28 days IS 4031:1988)	-

-
" 500 g Excluding Excl Air Content and Water retention test

13022

BIS, Southern Regional Laboratory (SRL)

None

IS 12600 (1989)

Portland cement, low heat - specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (Fineness 4031 Part 2)	-
6.2.1 (Expansion by Le Chatelier- 4031 Part 3)	-
6.2.1 (Expansion by Autoclave- 4031 Part 3)	-
6.3 a) (Setting Time Initial- 4031 Part 5)	-
6.3 b) (Setting Time Final- 4031 Part 5)	-
6.3 a) (Setting Time Initial- 4031 Part 5)	-
6.3 b) (Setting Time Final- 4031 Part 5)	-
6.3 a) (Setting Time Initial- 4031 Part 5)	-
6.3 b) (Setting Time Final- 4031 Part 5)	-
6.3 a) (Setting Time Initial- 4031 Part 5)	-
6.3 b) (Setting Time Final- 4031 Part 5)	-
6.3 a) (Setting Time Initial- 4031 Part 5)	-
6.3 b) (Setting Time Final- 4031 Part 5)	-
6.4 a) (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-
6.4 b) (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-
6.4 c) (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-
6.4 a) (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-
6.4 b) (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-
6.4 c) (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-
6.4 a) (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-
6.4 b) (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-
6.4 c) (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-
6.4 a) (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-
6.4 b) (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-
6.4 c) (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-
6.4 a) (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-
6.4 b) (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-
6.4 c) (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-
6.4 a) (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-
6.4 b) (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-
6.4 c) (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-
6.4 a) (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-
6.4 b) (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-
6.4 c) (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-

-
" 8Kg+1kg Excluding Excl Heat of Hydration

13023

BIS, Central Laboratory (CL)

None

IS 7809 : Part 3 : Sec 1 (1986)

Specification for pressure sensitive adhesive insulating tapes for electrical purposes: Part 3 requirements or individual materials: Sec 1 plasticized polyvinylchloride tapes with non - Thermosetting adhesive (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Marking, Cl.9 of IS 7809 (Part 1):1975)	-
3.1 (Marking, Cl.9 of IS 7809 (Part 1):1975)	-
3.1 (Marking, Cl.9 of IS 7809 (Part 1):1975)	-
3.1 (Marking, Cl.9 of IS 7809 (Part 1):1975)	-
3.1 (Marking, Cl.9 of IS 7809 (Part 1):1975)	-
3.1 (Marking, Cl.9 of IS 7809 (Part 1):1975)	-
3.1 (Marking, Cl.9 of IS 7809 (Part 1):1975)	-
3.1 (Marking, Cl.9 of IS 7809 (Part 1):1975)	-
3.1 (Marking, Cl.9 of IS 7809 (Part 1):1975)	-
2.1.1 (Type and Desiganation)	-
2.1.2 (Type and Desiganation)	-
3.1 (General Requirments,as per IS 7809 (Part 1 ) :1975 )	-
3.2 (General Requirments,as per IS 7809 (Part 1 ) :1975 )	-
3.3 (General Requirments,as per IS 7809 (Part 1 ) :1975 )	-
3.4 (General Requirments,as per IS 7809 (Part 1 ) :1975 )	-
4.1 (Performance Requirments)	-
4.2 (Performance Requirments)	-
4.3 (Performance Requirments)	-
4.4 (Performance Requirments)	-
4.5 (Performance Requirments)	-
4.6 (Flammability ,Cl 6 of IS 7809 (Part 2): 1977)	-
4.6 (Flammability ,Cl 6 of IS 7809 (Part 2): 1977)	-
4.6 (Flammability ,Cl 6 of IS 7809 (Part 2): 1977)	-
4.7 (Electrolytic corrosion)	-
4.8 (Stability to accelerated ageing )	-
4.9 (Insulation resistance test)	-
3.1 ( Minimum Storage Life Cl. 7.1 of IS 7809(Part 1) :1975)	-
3.1 (Appearance)	-
3.1 (Minimum Storage Life ,Dimensions , Cl. 7.1 of IS 7809(Part 1) :1975)	-
3.1 (Minimum Storage Life ,Dimensions , Cl. 7.1 of IS 7809(Part 1) :1975)	-
3.1 (Minimum Storage Life ,Dimensions , Cl. 7.1 of IS 7809(Part 1) :1975)	-
3.1 (Minimum Storage Life ,Dimensions , Cl. 7.1 of IS 7809(Part 1) :1975)	-
3.1 (Marking, Cl.9 of IS 7809 (Part 1):1975)	-
Cl. 4.1 of IS 7809-1-1975 (Appearance)	-
Cl. 5.1 of IS 7809-1-1975 (Freedom from defects)	-

-
-

13024

BIS, Southern Regional Laboratory (SRL)

None

IS 12337 (1988)

Specification for manually operated fertilizer broadcaster

Rs 600/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Constructional Requirements- Hopper)	-
4.1.1 (Constructional Requirements- Hopper)	-
4.2 (Constructional Requirements- Spreading Disc)	-
4.3 (Constructional Requirements- Feed Control Mechanism)	-
4.4 (Constructional Requirements- Agitator)	-
4.5 (Constructional Requirements- Gear Box and Gears)	-
4.6 (Constructional Requirements- Crank)	-
4.7 (Constructional Requirements- Straps)	-
4.7.1 (Constructional Requirements- Straps (Strap Drop Test))	-
4.7 (Constructional Requirements- Straps (cushion width))	-
4.7 (Constructional Requirements- Straps (cushion thickness))	-
4.7.1 (Constructional Requirements- Straps (Strap Drop Test))	-
4.8 (Constructional Requirements- Bearings)	-
4.9 (Constructional Requirements- Total Mass)	-
4.10. (Constructional Requirements)	-
5 (Capacity)	-
6.1 (Workmanship and Finish)	-
6.2 (Workmanship and Finish)	-

-
" 1 No.+ 15 kg of Fertilizer excluding chemical tests

13025

BIS, Central Laboratory (CL)

None

IS 374 (2019)

Specification for electric ceiling type fans and regulators (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7 (Classification (as per Cl.6 of IS 302-2-80 :2017))	-
7 (Classification (as per Cl.6 of IS 302-2-80 :2017))	-
7 (Classification (as per Cl.6 of IS 302-2-80 :2017))	-
7 (Classification (as per Cl.6 of IS 302-2-80 :2017))	-
8.1 (Marking (as per Cl. 7 of IS 302-2-80:2017))	-
8.1,a (Marking )	-
8.1,b (Marking )	-
8.1,c (Marking )	-
8.1,d (Marking )	-
8.1,e (Marking )	-
8.1,f (Marking )	-
8.1,g (Marking )	-
8.2 (Marking )	-
8.3,a (Marking )	-
8.3,b (Marking )	-
8.3,c (Marking )	-
8.3,d (Marking )	-
8.3,e (Marking )	-
8.4 (Marking )	-
8 (Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-
8 (Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-
8 (Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-
8 (Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-
6.2 (Rating)	-
9 (Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-
9 (Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-
9 ( Heating (as per Cl.11 of IS 302-2-80 :2017))	-
9 ( Heating (as per Cl.11 of IS 302-2-80 :2017))	-
9 ( Heating (as per Cl.11 of IS 302-2-80 :2017))	-
9 ( Heating (as per Cl.11 of IS 302-2-80 :2017))	-
9 (Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-
9 (Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-
9 (Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-
9 (Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-
9 (Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-
9 (Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-
9 (Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-
9 (Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-
9 (Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-
9 (Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-
9 (Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-
9 (Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-
9 (Components (as per Cl.24.103 of IS 302-2-80 :2017))	-
9 (Components (as per Cl.24.104 of IS 302-2-80 :2017))	-
9 (Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-
9 (Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-
9 (Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-
9 (Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-
9 (Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-
9 (Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-
9 (Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-
9 (Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-
9 (Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-
9 (Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-
10.1 (Speed Regulators)	-
10.2 (Speed Regulators)	-
10.2 (Speed Regulators)	-
10.2 (Speed Regulators)	-
10.4 (Speed Regulators)	-
10.5 (Speed Regulators)	-
10.6 (Speed Regulators)	-
11.1 (Starting)	-
12 (Interchangeability)	-
14.4 (Measurement of Speed of the Fan )	-
14.4 (Measurement of Speed of the Fan )	-
14.5 (Measurement of Power factor and Power Input)	-
14.5 (Measurement of Power factor and Power Input)	-
16 (Endurance Test)	-
16 (Endurance Test)	-
9 (Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-
16 (Endurance Test)	-
(Cl. 17 of IS 302-2-80 :2017) (Overload protection of transformers and associated circuits)	-
(Cl.4.4 of IS 374: 2019) (Bearings)	-
(Cl. 4.5 of IS 374: 2019) (Brushless DC Motor)	-
(Cl.4.6 of IS 374: 2019) (Enclosure)	-
(Cl. 7.6 of IS 302 Part 1) (Marking and Instructions)	-
Cl. 7.8 of IS 302-2-80 :2017 (MARKING AND INSTRUCTIONS)	-
(Cl. 7.12 of IS 302-2-80 :2017) (Marking and Instructions)	-
(Cl. 7.12.1 of IS 302-2-80 :2017) (Marking and Instructions)	-
(Cl. 7.12.5 of IS 302-1: 2008) (Marking and Instructions)	-
(Cl. 7.12.5 of IS 302-1: 2008) (Marking and Instructions)	-
(Cl. 7.12.5 of IS 302-1: 2008) (Marking and Instructions)	-
(Cl. 7.12.7 of IS 302-1: 2008 (Marking and Instructions)	-
(Cl. 7.13 of IS 302-1: 2008) (Marking and Instructions)	-
(Cl. 7.14 of IS 302-1: 2008) (Marking and Instructions)	-
(Cl. 10.1 of IS 374: 2019) (SPEED REGULATORS)	-
(Cl. 10.3 of IS 374: 2019) (SPEED REGULATORS)	-
(Cl. 10.4 of IS 374: 2019) (SPEED REGULATORS)	-
(Cl. 10.7 of IS 374: 2019) (SPEED REGULATORS)	-
(Cl. 10.7 of IS 374: 2019) (SPEED REGULATORS)	-
(Cl. 10.8 of IS 374: 2019) (SPEED REGULATORS)	-
(Cl. 11.2 of IS 374: 2019) (STARTING)	-
(Cl. 13 of IS 374: 2019) (SILENT OPERATION)	-
(Cl. 15.1 of IS 374: 2019) (PERFORMANCE REQUIREMENTS)	-
(Cl. 15.1 of IS 374: 2019) (PERFORMANCE REQUIREMENTS)	-
(Cl. 17 of IS 374: 2019 (Test for Harmonic Distortion)	-
(Cl. 8.2 of IS 302-1: 2008) (PROTECTION AGAINST ACCESS TO LIVE PARTS)	-
(Cl. 11 of IS 302-1: 2008) (HEATING)	-
(Cl. 15 of IS 302-1: 2008) (MOISTURE RESISTANCE)	-
(Cl. 15 of IS 302-1: 2008) (MOISTURE RESISTANCE)	-
(Cl. 15 of IS 302-1: 2008. (MOISTURE RESISTANCE)	-
(Cl. 17 of IS 302-1: 2008) (OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-
(Cl. 17 of IS 302-1: 2008) (OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-
(Cl. 19.13 of IS 302-1: 2008) (ABNORMAL OPERATION)	-
(Cl. 19.7 of IS 302-1: 2008) (ABNORMAL OPERATION)	-
(Cl. 19 of IS 302-2-80 :2017) (ABNORMAL OPERATION)	-
(Cl. 19.13 of IS 302-1: 2008) (ABNORMAL OPERATION)	-
(Cl. 19.13 of IS 302-1: 2008) (ABNORMAL OPERATION)	-
(Cl. 19.13 of IS 302-1: 2008) (ABNORMAL OPERATION)	-
(Cl. 19.13 of IS 302-1: 2008) (ABNORMAL OPERATION)	-
(Cl. 20.102 of IS 302-2-80 :2017) (STABILITY AND MECHANICAL HAZARDS)	-
(Cl. 22.2 of IS 302-1: 2008) (CONSTRUCTION)	-
(Cl. 22.14 of IS 302-1: 2008) (CONSTRUCTION)	-
(Cl. 22.18 of IS 302-1: 2008) (Electric Ceiling type fan-Specification)	-
(Cl. 22.21 of IS 302-1: 2008) (CONSTRUCTION)	-
(Cl. 22.22 of IS 302-1: 2008) (CONSTRUCTION)	-
(Cl. 22.41 of IS 302-1: 2008) (CONSTRUCTION)	-
(Cl. 22.44 of IS 302-1: 2008) (CONSTRUCTION)	-
(Cl. 22.101 of IS 302-2-80: 2017) (CONSTRUCTION)	-
(Cl. 23.1 of IS 302-1: 2008) (INTERNAL WIRING)	-
(Cl. 23.2 of IS 302-1: 2008) (INTERNAL WIRING)	-
(Cl. 23.4 of IS 302-1: 2008) (INTERNAL WIRING)	-
(Cl. 23.5 of IS 302-1: 2008) (INTERNAL WIRING)	-
(Cl. 23.6 of IS 302-1: 2008) (INTERNAL WIRING)	-
(Cl. 23.7 of IS 302-1: 2008) (INTERNAL WIRING)	-
(Cl. 23.9 of IS 302-1: 2008) (INTERNAL WIRING)	-
(Cl. 23.10 of IS 302-1: 2008) (INTERNAL WIRING)	-
(Cl. 24.1 of IS 302-1: 2008) (COMPONENTS)	-
(Cl. 24.5 of IS 302-1: 2008) (COMPONENTS)	-
(Cl. 24.105 of IS IS 302-2-80 :2017) (COMPONENTS)	-
(Cl. 26.1 of IS 302-1: 2008) (TERMINALS FOR EXTERNAL CONDUCTORS)	-
(Cl. 26.8 of IS 302-1: 2008) (TERMINALS FOR EXTERNAL CONDUCTORS)	-
(Cl. 26.9 of IS 302-1: 2008) (TERMINALS FOR EXTERNAL CONDUCTORS)	-
(Cl. 26.10 of IS 302-1: 2008) (TERMINALS FOR EXTERNAL CONDUCTORS)	-
(Cl. 27.1 of IS 302-1: 2008) (PROVISION FOR EARTHING)	-
(Cl. 27.2 of IS 302-1: 2008) (PROVISION FOR EARTHING)	-
(Cl. 27.4 of IS 302-1: 2008) (PROVISION FOR EARTHING)	-
(Cl. 27.5 of IS 302-1: 2008) (PROVISION FOR EARTHING)	-
(Cl. 28.4 of IS 302-1: 2008) (SCREWS AND CONNECTIONS)	-
(Cl. 30.2 of IS 302-1: 2008) (RESISTANCE TO HEAT AND FIRE)	-
(Cl. 30.2 of IS 302-1: 2008) (RESISTANCE TO HEAT AND FIRE)	-
(Cl. 32 of IS 302-1: 2008) (Radiation, toxicity and similar hazards)	-

-
Complete except BLDC Type Fan;

13026

BIS, Central Laboratory (CL)

None

IS 2745 (1983)

Specification for non - Metal helmet for firemen and civil defence personnel (Second Revision)

1500 View breakup
Rs.1500/- excluding shock absorption test, penetration resistance test, strength of retention system, water absorption test and firing test (Optional) and material testing charges as per relevant referred Iss

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 3 (Shell, Protective padding, Retention System & Neck protector)	-
Cl 5 ( Shell, Protective Padding, Brim, Head band, Chin Strap, Cradle, Neck Protector & Visor)	-
Cl 6 (Workmanship & Finish)	-
Cl 7 (Mass)	-

-
Excluding Test facility not available for Cl 4.1 sizes, Cl 9.1 Shock Absorption Test, Cl 9.2 Penetration Resistance, Cl 9.3 Strenth of Retention system;

13027

BIS, Central Laboratory (CL)

None

IS 9562 (1980)

Specification for non - Metal helmet for police force

Rs.2100/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 3 (Shell, Protective padding & Retention System)	-
Cl 5 ( Shell, Protective Padding, Brim, Head band, Chin Strap, Cradle, Neck Protector & Visor)	-
Cl 6 (Workmanship & Finish)	-
Cl 7 (Mass)	-

-
Exclusion Test facility not available for Cl 4.1 sizes, Cl 9.1 Shock Absorption Test, Cl 9.2 Penetration Resistance, Cl 9.3 Strenth of Retention system, Cl 9. Firing Test, Cl 9.6 Flammability Test;

13028

BIS, Eastern Regional Laboratory (ERL)

None

IS 778 (1984)

Specification for 2010 copper alloy gate, globe and check valves for waterworks purposes (Fourth Revision)

For all classes except tests mentioned in remarks

Rs 4500/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 (Nominal Sizes )	-
4 (Classification )	-
5 (Types)	-
7.1 (Valve Bodie - IS 778)	-
7.1.1 (Body End Ports -IS 778)	-
7.1.2 (Water-Way Area - IS 778)	-
7.1.3 (Screwed Body End -IS 778)	-
7.1.3.1-Table2 (length of threaded portion in screwed end valves - IS 778)	-
7.1.3.1 (Screwed Body End -IS 778)	-
7.1.5 (Wedge and Disc Guides in the Bodies of Gate Valves - IS 778)	-
7.2.1 (Bonnets - IS 778)	-
7.2.1.1 (Bonnets - IS 778)	-
7.2.1.2 (number of engaged threads - IS 778)	-
7.2.1.2 (pitch of threads - IS 778)	-
7.2.1.3 (Bonnets - IS 778)	-
7.3 (Stuffing Box - IS 778)	-
7.4 (Gland - IS 778)	-
7.4.1 (Gland nut - IS 778)	-
7.6.1 (Stem - IS 778)	-
7.6.2 (Threads of Stem - IS 778)	-
7.6.3 (actuating threads - IS 778)	-
7.6.4 (Length of Stem - IS 778)	-
7.6.5 (Upper end of Stem - IS 778)	-
7.6.7 (Non-rising Stem - IS 778)	-
7.6.6 (Rising Stem - IS 778)	-
7.7.1 (Wedge-IS 778)	-
7.7.2 (Wedge-IS 778)	-
7.7.3 (Double disc - IS 778)	-
7.7.3.1 (Spreading assembly - IS 778)	-
7.7.3.2 (Disc - IS 778)	-
7.10.1 (Body Seats - IS 778)	-
7.10.1 (Seat ring - IS 778)	-
7.11 (Handwheel - IS 778)	-
7.11 (Handwheel - IS 778)	-
8.1- Table 4 (Thickness of Body and Bonnet- IS 778)	-
8.2 - Table 5 (Flat to Flat size -IS 778 )	-
8.3 - Table 6 (Width of end - IS 778)	-
8.4 - Table 7 (Stem Diameters - IS 778)	-
8.5 - Table 8 (Size of packing space - IS 778)	-
8.5 - Table 8 (Depth of stuffing box - IS 778)	-
8.5 - Table 8 (Dia of stuffing box - IS 778)	-
8.6- Table 9 to Table 12 (End to end/ centre to ends/ Face to face/Centre to face dimension )	-
6- Table 1-i) (Brass(Body)-Cl 7 and table 1 of IS 1264)	-

-
Facility not available for hydraulic test & Thread measurement

13029

BIS, Southern Regional Laboratory (SRL)

None

IS 8329 (2000)

Centrifugally cast (Spun) ductile iron pressure pipes for water, gas and sewage - Specification (Third Revision)

Rs.7800/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 10 (Hardness & Tensile Test)	-
Cl 11 (Hydrostatic Test)	-
Cl 13 (Length, Diameter, Wall Thickness & Ovality)	-

-
" 1 No. Excluding Excl hydrostatic test, chemical facilty. Facility for preparation of test specimen not available.

13030

BIS, Central Laboratory (CL)

None

IS 2925 (1984)

Specification for industrial safety helmets (Second Revision)

Rs 7770/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Shell)	-
3.3 (Metal Parts)	-
4.1 (Sizes)	-
5.1 (Shell)	-
5.2 (Harness)	-
5.3 (Chin Strap or Nape Strap)	-
6.1 (Workmanship & Finish)	-
7.1 (Mass)	-
8.1 (Shock Absorption Resistance)	-
8.2 (Penetration Resistance)	-
8.4 (Electrical Resistance)	-
8.5 (Water Absorption)	-
8.6 (Heat Resistance)	-
3.1 (Shell)	-

-
-

13031

BIS, Northern Regional Laboratory (NRL)

None

IS 2465 (1984)

Specification for cables for motor vehicles (Second Revision)

Single core PVC Insulated Unsheathed: Rs. 11030/- View breakup
Single core PVC Insulated Unsheathed: Rs. 11030/- Single core PVC Insulated Sheathed: 75 % additional for sheath. Multi core with PVC Sheath: 75% additional for each additional core. Round and flat tinned copper braids without further covering for earthing: Rs. 1115/- Above charges are excluding Material tests, Ageing in oxygen bomb, Capacitance test, Ozone resistance test, Effect of heat on flexibility, Effect of oils, Effect of lubricating oil, brake fluid, diesel and petrol, Effect of cooling on flexibility.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1 (Insulation)	-
7.3 (Insulation)	-
8 (Core Identification)	-
9 (Laying up of cores)	-
10.1.1 (Sheathing )	-
10.2 (Sheathing )	-
3 & 6 (Flexibility class)	-
3 & 6 (Construction)	-
3 & 6 (Diameter of wire(mm))	-
3 & 6 (Annealing test)	-
3 & 6 (Persulphate Test)	-
3 & 6 (Conductor resistance Test (ohm/km at 20˚c))	-
7.2, 10.3, 11 (Dimensions & thickness )	-
7.2, 10.3, 11 (Dimensions & thickness )	-
7.2, 10.3, 11 (Overall Dimension (mm))	-
4.2 & 12.1 (Without Ageing For Insulation Tensile Strength (N/mm²))	-
4.2 & 12.1, (f), 1 (elongation at break (N/mm²))	-
4.2 & 12.1, (f), 1 (Tensile Strength at break (N/mm²))	-
4.2 & 12.1, (e), 1 (elongation test at break)	-
4.2 & 12.1, (e), 1 (Tensile strength at break)	-
4.2 & 12.1, (f), 2 (Ageing in air oven)	-
4.2 & 12.1, (f), 3 (Ageing in oxygen bomb)	-
4.2 & 12.1, (e), 2 (After Ageing in air oven)	-
4.2 & 12.1, (e), 3 (Loss of mass test (mg/cm²) of Insulation)	-
4.2 & 12.1, (e), 3 (Loss of mass test (mg/cm²) of Sheath)	-
4.2 & 12.1, (e), 4 (Hot deformation test (%) of Insulation)	-
4.2 & 12.1, (e), 4 (Hot deformation test (%) of Sheath)	-
4.2 & 12.1, (e), 5 (Heat Shock Test of Insulation)	-
4.2 & 12.1, (e), 5 (Heat Shock Test of Sheath)	-
4.2 & 12.1, (e), 6 (Shrinkage Test (%) of Insulation)	-
4.2 & 12.1, (e), 6 (Shrinkage Test (%) of Sheath)	-
14 (High Voltage Test)	-
22.1 (FLAMMABILITY TEST)	-
22.1 (FLAMMABILITY TEST)	-
23.1 (Manufacturer's Identification)	-
23.1 (Manufacturer's Identification)	-
24.1 (PACKING AND MARKING)	-
24.2 (PACKING AND MARKING)	-
24.2.1 (PACKING AND MARKING)	-

-
"Complete for general wiring only & Partial for PVC Insulation ignition cable Excluding Cl. 16 capacitance, Cl. 18 Effect of heat on flexibility"

13032

BIS, Central Laboratory (CL)

None

IS 4151 (1993.0)

Protective helmets for motorcycle riders - Specification

testing charges for the product are Rs. 27300/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Shell)	-
4.5 (Metal Parts)	-
6.1 (General)	-
6.2 (Shell)	-
6.3 (Protactive Padding)	-
6.4 (Retention System)	-
6.7 (Peripheral Vision)	-
6.8 (Workmanship and Finish)	-
7.2 (Impact Absorption Test)	-
7.3 (Rigidity Test)	-
7.4 (Projections and Surface Friction Test)	-
7.5 (Dynamic Test of Retention System)	-
7.6 (Audibility Test)	-
7.7 (Retention Test of Helmet)	-
7.8 (Micro-Slip Test of the Chin Strap)	-
7.9 (Test for Resistance to Abrasion of the Chin Strap )	-
7.10.2 (Ease of Release)	-
7.10.3 (Durability of Quick Release Mechanism)	-

-
IS superseded by newer version;

13033

BIS, Southern Regional Laboratory (SRL)

None

IS 1038 (1983)

Specification For Steel Doors, Windows And Ventilators

3000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1. (Size-Height)	-
4.1 (Size-Width)	-
4.1. (Size-Height)	-
4.1 (Size-Width)	-
4.1. (Size-Height)	-
4.1 (Size-Width)	-
4.3 (Designation)	-
6.1.1.1 (Visual Inspection Test)	-
6.2 (Side Hung Shutter- Thickness of hinge)	-
6.2 (Side Hung Shutter- Pin diameter)	-
6.2 (Side Hung Shutter)	-
6.2 (Side Hung Shutter-Width of hinge)	-
6.2.2 & 6.2.2.1 (Handle and Handle Plate-Material of handel )	-
6.2.2 & 6.2.2.1 (Handle and Handle Plate- Thicknesss of handle)	-
6.2.2 & 6.2.2.1 (Handle and Handle Plate-Height of handle plate)	-
6.2.3 (Peg Stay - Material)	-
6.2.3 (Peg Stay - Thickness)	-
6.2.3 (Peg Stay )	-
6.3 (Top Hung Ventilator)	-
6.3 (Top Hung Ventilator-Thickness of hinge)	-
6.3 (Top Hung Ventilator-Pin diameter)	-
6.3 (Top Hung Ventilator-Width of hinge)	-
7.1 (Position of Holes)	-
7.2 Table 2 (Position of Fixing Screws)	-
7.2 Table 2 (Lugs-A)	-
7.2 Table 2 (Lugs-B)	-
7.2 Table 2 (Lugs-C)	-
7.2 Table 2 (Lugs-D)	-
7.2 Table 2 (Lugs-E)	-
6.2.3 (Peg Stay - Dimensions-F)	-
7.2 Table 2 (Lugs-G)	-
8 (Finish)	-
9 (Glazing)	-

-
" 1+1 NO. Excluding Excl. micro and macro examination & Fillet weld test

13034

BIS, Southern Regional Laboratory (SRL)

None

IS 4308 (2019)

Dry Chemical Powders for Fire Fighting — BC, ABC and D Types — Specification ( Third Revision )

Rs 5770/- for both ordinary type & foam compatible type View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 5 Table 1(iii) (Apparent density (Declared value by the manufacturer))	-
Clause 5 Table 1(iv) (Particle size / sieve analysis (Declared value by the manufacturer))	-
Clause 5 Table 1(vi) (Water repellency)	-
Clause 5 Table 1(vii) (Moisture content)	-
Clause 5 Table 1(xii) (colour)	-

-
" 5 kg Excluding Rate of flow, Foam compatibility, Fire Test, Temperature Resistance Test , chemical constituents

13035

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING AND TECHNOLOGY (CIPET):CSTS-BHOPAL

8100534

IS 5175 (2014)

Fibre ropes – Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high- tenacity multifilament (PP3) – 3-, 4-, 8- and 12-strand ropes (third revision)

6300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4( Designation)	-	0	Nil
Cl 5(General Requirements)	-	3950	Nil
Cl 6 & Table 1,2 or 3(Reference Number.)	-	750	Nil
Cl 6 & Table 1,2 or 3(Linear Density)	-	500	Nil
Cl 6 & Table 1,2 or 3(Breaking Force)	-	1100	Nil

31 Dec, 2026

-
-

13036

MSME TESTING CENTRE (WR), MUMBAI

7119404

IS 694 (2010)

Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 v (Fourth Revision)

PVC insulated unsheathed & sheathed cables/cords 110V

22000 View breakup
Type test ₹12000 Singlecore/Unsheathed/01,₹16000 Singlecore/Sheathed/01,₹20000 Singlecore/Unsheathed/FR,₹22000 Singlecore/Sheathed/FR; Multicore: 25% extra for each additional core on single core rate, Cat.02 ₹5000/- extra

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Tensile test (for Al)- After Stranding)	-	1800	Type test: i)Single core/Unsheathed/01:Rs.12,000/-, ii) Single core/sheathed/01:Rs.16000/- , iii)Single core/Unsheathed/FR:Rs.18000/-, iv)Single core/sheathed/FR:Rs.22000/-
4.1(Tensile test (for Al)-Before Stranding)	-	1800	Acceptance test: i)Single core/Unsheathed/01:Rs.9,000/-, ii) Single core/sheathed/01:Rs.12000/- , iii)Single core/Unsheathed/FR:Rs.13500/-, iv)Single core/sheathed/FR:Rs.16500/-
4.1(Annealing test (for copper))	-	1800	For Multicore cables:25%extra for each additional core on single core rate
4.1(Wrapping test (for Al))	-	1500	-
4.2(Conductor resistance test)	-	1800	-
Table 1(Category Code)	-	5000	For Cat.02 Rs.5000/- additional on above test charge
table 1 e) 3) (Volume Resistivity - Maximum temp)	-	1800	1800
table 1 e) 3) (IR constant- Room temp )	-	1800	1800
table 1 e) 3) (IR constant- max. Temp)	-	1800	1800
5.1(Insulation)	-	2000	2000
Table 1 iii) d) 7)(Thermal stability- Sheath )	-	1800	1800
Table 1 iii) d) 4)(Shrinkage- Sheath )	-	3500	3500
Table 1 iii) c) 5)(Heat shock-Insulation )	-	1800	1800
Table 1 iii) d) 6)(Hot deformation -Indentation depth - Sheath )	-	2000	2000
Table 1 iii) d) 8)(Cold bend for sheath)	-	3500	3500
Table 1 iii) d) 9)(Cold impact for sheath)	-	3500	3500
10.4(Flammability test- Unaffected portion)	-	1800	1800
10.5(Oxygen index)	-	3500	3500
10.7(Temperature index)	-	3500	3500
Table 1 iii) d) 2)(Loss of mass- Sheath )	-	3000	3000
Table 1 iii) d) 3)(Sheath- TS variation)	-	2000	2000
Table 1 iii) c) 4)(Shrinkage-Insulation)	-	3500	3500
Table 1 iii) d) 5)(Heat shock-Sheath )	-	1800	1800
10.1(HV (water immersion))	-	4000	4000
10.2(HV (room temperature))	-	1800	1800
10.9(Additional ageing test (OU cables only) -HV test (at 60±3oC))	-	5000	5000

-
-

13037

MSME TESTING CENTRE (WR), MUMBAI

7119404

IS 4250 (1980)

Specification for domestic electric food - Mixers (Liquidizers And Grinders) (First Revision)

Domestic Electric Food Mixers (Liquidizers & Grinders)

16000 View breakup
Type test: Rs. 16,000/- ; Acceptance test Rs. 12,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Marking- IS 302-1)	-	1800	1800
8( Protection Against Electric Shock, IS 302-1)	-	1800	1800
9(Starting, IS 302-1)	-	1800	1800
10(Power Input and Current, IS 302-1)	-	1800	1800
11(Heating, IS 302-1)	-	2500	2500
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1800	1800
15.1(Moisture Resistance, IS 302-1)	-	3000	3000
15.2(Moisture Resistance-Spillage test)	-	3000	3000
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1800	1800
19(Abnormal Operation, IS 302-1)	-	1800	1800
21(Mechanical Strength, IS 302-1)	-	1800	1800
25(Supply Connection and External Flexible Cords, IS 302-1)	-	1800	1800
27(Provision for Earthing, IS 302-1)	-	1800	1800
28(Screws & Connections, IS 302-1)	-	1800	1800
29(Clearances and Distances through Insulation, IS 302-1)	-	1800	1800
30(Resistance to Heat, Fire, Tracking, IS 302-1)	-	3000	3000
34.2(Operational tests- Grinding coffee (for machines which have a dry grinding arrangement))	-	2500	2500
34.3(Whisking egg whites )	-	2500	2500
35(Temperature withstand test for bowl)	-	1500	1500
36(Test for controls )	-	1800	1800

-
Type Test: Rs.14,000/- Acceptance Test: Rs.10,500/-

13038

MSME TESTING CENTRE (WR), MUMBAI

7119404

IS 16102 : Part 1 (2012)

Self - Ballasted led lamps for general lighting services: Part 1 safety requirements

Self ballasted LED Lamps for general lighting service

20000 View breakup
Type test Rs. 20,000/- ; Acceptance test Rs. 15,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking)	-	1800	1800
6(Interchangeability)	-	1800	1800
7(Protection against accidental contact with live parts)	-	1800	1800
8(Insulation Resistance and Electric Strength)	-	6000	6000
9(MECHANICAL STRENGTH)	-	2500	2500
10(cap temperature)	-	5000	5000
11(Resistance to Heat)	-	1800	1800
12(Resistance to Flame and Ignition)	-	2500	2500
13(Fault conditions)	-	1800	1800
14(Creepage distance and clearances)	-	1800	1800

-
Lamp Cap Type : B22d only

13039

MSME TESTING CENTRE (WR), MUMBAI

7119404

IS 1293 (2019)

Plugs and socket - Outlets of rated Voltage up to and including 250 Volts and rated current up to and including 16 amperes - Specification (Third Revision)

upto & including 250V & rated current upto 16A

22000 View breakup
Type test : Rs.14,000/- for 6/10A; Rs. 16,000/- for 16A; Rs. 22,000/- for 6A/16A combined socket. Acceptance test: Rs.10,500/- for 6/10A; Rs. 16,000/- for 16A; Rs. 15,000/- for 6A/16A combined socket.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Ratings)	-	1800	Type Test:6A/10A:Rs.14000/-, 16A:Rs.16000/-, 6/16AMultiple Socket:Rs.20000/- Acceptance Test:6A/10A:Rs.10500/-, 16A:Rs.12000/-, 6/16AMultiple Socket:Rs.15000/-
7.1.1(Accessories Classification)	-	1800	Type Test:6A/10A:Rs.14000/-, 16A:Rs.16000/-, 6/16AMultiple Socket:Rs.20000/- Acceptance Test:6A/10A:Rs.10500/-, 16A:Rs.12000/-, 6/16AMultiple Socket:Rs.15000/-
7.1.2(Accessories Classification)	-	1800	1800
7.1.3(Accessories Classification)	-	1800	1800
7.1.4(Accessories Classification)	-	1800	1800
7.1.5(Accessories Classification)	-	1800	1800
7.2.1(Socket-Outlets Classification)	-	1800	1800
7.2.2(Socket-Outlets Classification)	-	1800	1800
7.2.3(Socket-Outlets Classification)	-	1800	1800
7.2.4(Socket-Outlets Classification)	-	1800	1800
7.3(Plug Classification)	-	1800	1800
8.1(MARKING)	-	1800	1800
8.8(MARKING)	-	1800	1800
8.9(MARKING)	-	1800	1800
9.1(CHECKING OF DIMENSIONS)	-	1800	1800
9.2(CHECKING OF DIMENSIONS)	-	1800	1800
10.1(PROTECTION AGAINST ELECTRIC SHOCK)	-	1800	1800
10.3(PROTECTION AGAINST ELECTRIC SHOCK)	-	1800	1800
10.4(PROTECTION AGAINST ELECTRIC SHOCK)	-	1800	1800
10.5(PROTECTION AGAINST ELECTRIC SHOCK)	-	1800	1800
10.6(PROTECTION AGAINST ELECTRIC SHOCK)	-	1800	1800
10.7(PROTECTION AGAINST ELECTRIC SHOCK)	-	1800	1800
11.1(PROVISIONS FOR EARTHING)	-	1800	1800
11.2(PROVISIONS FOR EARTHING)	-	1800	1800
11.3(PROVISIONS FOR EARTHING)	-	1800	1800
11.4(PROVISIONS FOR EARTHING)	-	1800	1800
11.5(PROVISIONS FOR EARTHING)	-	1800	1800
11.6(PROVISIONS FOR EARTHING)	-	1800	1800
12.1.1(TERMINALS)	-	2500	2500
12.1.2(TERMINALS)	-	2500	2500
12.2.1(TERMINALS)	-	2500	-
12.2.2(TERMINALS)	-	2500	2500
12.2.3(TERMINALS)	-	2500	2500
12.2.4(TERMINALS)	-	2500	2500
12.2.5(TERMINALS)	-	2500	2500
12.2.6(TERMINALS)	-	2500	2500
12.2.7(TERMINALS)	-	2500	2500
12.2.8(TERMINALS)	-	2500	2500
12.2.9(TERMINALS)	-	2500	2500
12.2.10(TERMINALS)	-	2500	2500
12.2.11(TERMINALS)	-	2500	2500
12.3.1(TERMINALS)	-	2500	2500
12.3.2(TERMINALS)	-	2500	2500
12.3.4(TERMINALS)	-	2500	2500
12.3.5(TERMINALS)	-	2500	2500
12.3.6(TERMINALS)	-	2500	2500
12.3.7(TERMINALS)	-	2500	2500
12.3.8(TERMINALS)	-	2500	2500
12.3.9(TERMINALS)	-	2500	2500
12.3.10(TERMINALS)	-	2500	2500
12.3.11(TERMINALS)	-	2500	2500
12.3.12(TERMINALS)	-	2500	2500
13.1(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.2(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.3(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.4(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.5(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.6(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.7(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.8(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.9(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.11(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.12(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.13(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.14(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.15(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.16(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.17(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.18(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.19(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.21(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.22(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.23(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
14.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	2500	2500
14.26(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	2500	2500
15(INTERLOCKED SOCKET-OUTLETS)	-	2500	2500
16.1(RESISTANCE TO AGEING,)	-	3000	3000
16.2(RESISTANCE TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	3000	3000
16.3(Resistance to Humidity)	-	3000	3000
17.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	1800	1800
17.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	1800	1800
17.3(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	1800	1800
18(OPERATION OF EARTHING CONTACTS)	-	1800	1800
19(TEMPERATURE RISE)	-	2500	2500
20(BREAKING CAPACITY)	-	2000	2000
21(NORMAL OPERATION)	-	4000	4000
22.1(Verification of the Maximum Withdrawal Force)	-	1800	1800
22.2(Verification of Minimum Withdrawal Force)	-	1800	1800
23.1(FLEXIBLE CABLES AND THEIR CONNECTION)	-	1800	1800
23.3(FLEXIBLE CABLES AND THEIR CONNECTION)	-	1800	1800
24.1(MECHANICAL STRENGTH For all kinds of fixed socket-outlets )	-	1800	1800
24.2(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	1800	1800
24.3(MECHANICAL STRENGTH for fixed socket-outlets with a main part intended to be mounted directly on a surface)	-	1800	1800
24.4(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	1800	1800
24.5(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	1800	1800
24.6(MECHANICAL STRENGTH For screwed glands of accessories having an IP code higher than IP20)	-	1800	1800
25.1(RESISTANCE TO HEAT Accessories and surface mounting boxes)	-	2500	2500
25.2(RESISTANCE TO HEAT Parts of insulating material necessary to retain current-carrying parts of the earthing circuit in position, as well as parts of the front surface zone of thermoplastic material)	-	2500	2500
25.3(RESISTANCE TO HEAT Parts of insulating material not necessary to retain current-carrying parts and parts of the earthing circuit in position, even though they are in contact with them)	-	2500	2500
25.4(RESISTANCE TO HEAT )	-	2500	2500
25.1(RESISTANCE TO HEAT Accessories and surface mounting boxes)	-	2500	2500
26.1(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	1800	1800
26.2(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	1800	1800
27.1(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	1800	1800
27.2(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	1800	1800
28.1.1(Resistance to Abnormal Heat and to Fire Glow-Wire Test)	-	2500	2500
28.1.2(Resistance to Abnormal Heat and to Fire for plugs with pins provided with insulating sleeves)	-	2500	2500
28.2(Resistance to Tracking For accessories other than IP code higher than IPX0 parts of insulating material retaining live parts in position)	-	2500	2500
29(RESISTANCE TO RUSTING)	-	1800	1800
30.1(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Pressure Test at High Temperature)	-	1800	1800
30.2(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Static Damp Heat Test)	-	1800	1800
30.3(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Tests at Low Temperature)	-	1800	1800
30.4(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Impact Test at Low Temperature)	-	1800	1800

-
-

13040

MSME TESTING CENTRE (WR), MUMBAI

7119404

IS 14927 : Part 2 (2001)

Cable Trunking and Ducting Systems for Electrical Installations : Part 2 Cable Trunking and Ducting Systems Intended for Mounting on Walls or Ceiling

12000 View breakup
Rs 12,000 For complete IS

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	1000	1000
7.2(Marking (as per Cl 7.2 of IS:14927(Pt-I ):2001))	-	1000	1000
8.1( Dimensions (As per cl.8.1 of IS 14927(Pt-1) : 2001))	-	1000	1000
8.2(Dimensions (As per cl.8.2 of IS 14927(Pt-1) : 2001)	-	1000	1000
8.3, table 2( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	1000	1000
9.1(Construction)	-	2000	2000
9.2(Construction ( As per Cl. 9.2 of IS 14927(Pt-1):2001))	-	2000	2000
9.3(Construction ( As per Cl. 9.3 of IS 14927(Pt-1):2001))	-	2000	2000
9.4.1(Construction [Access to Live Parts (As per Cl. 9.4.1 of IS 14927(Pt-1):2001)])	-	2000	2000
9.5(Construction (As per Cl. 9.5 of IS 14927(Pt-1):2001))	-	2000	2000
9.6.2(Construction [Membranes (As per Cl.9.6.2 of IS: 14927 (Pt-1):2001)])	-	2000	2000
9.6.4(Construction [Membranes (As per Cl.9.6.4 of IS: 14927 (Pt-1):2001)])	-	2000	2000
9.7.2, table 4(Construction [Glands (As per Cl.9.7.2 and Table-4 of IS: 14927 (Pt-1):2001)] )	-	2000	2000
10.2(Cable supporting test for Surface mounting (As per Cl.10.2))	-	2000	2000
10.3(Impact Test [ Cl.10.3 ])	-	2000	2000
10.4(Linear Deflection Test [ Cl.10.4 ])	-	2000	2000
11.1.1(Resistance to flame propagation (As per Cl. 11.1.1))	-	1000	1000
12(Electrical Insulating Strength and Insulation Resistance Test. [ Cl.12.3 ])	-	3000	3000
10.2(Cable supporting test for Surface mounting (As per Cl.10.2))	-	2000	2000

-
-

13041

MSME TESTING CENTRE (WR), MUMBAI

7119404

IS 9537 : Part 3 (1983)

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials

14000 View breakup
Rs 14,000 For complete IS

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	1000	Rs.14,000/- for BIS Samples Rs.4950/- for upto and including 25mm, Rs.4,275/- for above 25mm
6.1(Marking)	-	1000	Rs.14,000/- for BIS Samples Rs.4950/- for upto and including 25mm, Rs.4,275/- for above 25mm
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	1000	1000
7.1.1(Maximum and minimum outside diameter of socket)	-	1000	1000
7.1.1 Table-2(Length of Socket end)	-	1000	1000
7.1.2(Maximum and minimum outside diameter of conduit)	-	1000	1000
7.2(Minimum inside diameter of conduit)	-	1000	1000
7.3(Length of conduit)	-	1000	1000
7.4(Unifomity of The wall Thickness)	-	1000	1000
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	2000	2000
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	2000	2000
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	2000	2000
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	2000	2000
10(Resistance to Heat -Ball presure test)	-	2000	2000
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	1000	1000
12(Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	3000	3000
12(Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	3000	3000

-
-

13042

MSME TESTING CENTRE (WR), MUMBAI

7119404

IS 3419 (1988)

Specification for fittings for rigid non - Metallic (Second Revision)

10000 View breakup
Rs 10,000 For complete IS

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8 & 5(Visual Examination -IS:3419)	-	1000	1000
6.2 & 9.1- Table-1, ii(Inside Diameter of Collar for Slip type cuplers -IS:3419)	-	2000	2000
6.2 & 9.1- Table-1, iii(Inside Diameter of Ridge for Slip type cuplers -IS:3419)	-	2000	2000
6.2 & 9.1- Table-1, iv(Minimum overall length for Slip type cuplers -IS:3419)	-	2000	2000
6.2 & 9.1- Table-1, v(Minimum wall thickness for Slip type cuplers -IS:3419)	-	2000	2000
6.2 & 9.1- Table-2, ii(Inside Diameter of Collar for Socketed type cuplers -IS:3419)	-	2000	2000
6.2 & 9.1- Table-2, iii(Inside Diameter of Ridge for Socketed type cuplers -IS:3419)	-	2000	2000
6.2 & 9.1- Table-2, iv(Minimum overall length (a) for Socketed type cuplers -IS:3419)	-	2000	2000
6.2 & 9.1- Table-2, v(Minimum overall length (l) for Socketed type cuplers -IS:3419)	-	2000	2000
6.2 & 9.1- Table-2, vi(Minimum wall thickness for Socketed type cuplers -IS:3419)	-	2000	2000
6.2 & 9.1- Table-3, ii(Inside Diameter of Collar(d6) for Clamp type cuplers -IS:3419)	-	2000	2000
6.2 & 9.1- Table-3, iv(Inside Diameter of Ridge for Clamp type cuplers -IS:3419)	-	2000	2000
6.2 & 9.1- Table-3, iv(Minimum length for Clamp type cuplers -IS:3419)	-	2000	2000
6.2 & 9.1- Table-4, v(Length (l1) of Normal Type Bend -IS:3419)	-	2000	2000
6.2 & 9.1- Table-3, vi(Minimum wall thickness for Clamp type cuplers -IS:3419)	-	2000	2000
6.2 & 9.1- Table-4, ii(Outside Dameter of Normal type bend -IS:3419)	-	2000	2000
6.2 & 9.1- Table-4, iii(Minimum Inside Diameter of Normal Type Bend -IS:3419)	-	2000	2000
6.2 & 9.1- Table-4, iv(Radious(R) of Normal Type Bend -IS:3419)	-	2000	2000
6.2 & 9.1- Table-5, ii(Outside Dameter of Slip type cupling bend -IS:3419)	-	2000	2000
6.2 & 9.1- Table-5, iii(Minimum Inside Diameter of Slip type cupling bend -IS:3419)	-	2000	2000
6.2 & 9.1- Table-5, iv(Inside Diameter of collar for Slip type cupling bend -IS:3419)	-	2000	2000
6.2 & 9.1- Table-5, v(R- for Slip type cupling bend -IS:3419)	-	2000	2000
6.2 & 9.1- Table-5, vi(Y- for Slip type cupling bend -IS:3419)	-	2000	2000
6.2 & 9.1- Table-5, vii(l2- for Slip type cupling bend -IS:3419)	-	2000	2000
6.2 & 9.1- Table-6, ii(Inside Diameter of collar for Normal type Elbows -IS:3419)	-	2000	2000
6.2 & 9.1- Table-6, iii(Length (l) of Normal Type Elbows -IS:3419)	-	2000	2000
6.2 & 9.1- Table-6, iv(Radious(r) of Normal Type Elbows -IS:3419)	-	2000	2000
6.2 & 9.1- Table-6, v(Minimum wall thicknes of Elbows -IS:3419)	-	2000	2000
6.2 & 9.1- Table-7, ii(Inside Diameter of Collear for Normal type Tees -IS:3419)	-	2000	2000
6.2 & 9.1- Table-7, iii(Length (l) of Normal type Tees -IS:3419)	-	2000	2000
6.2 & 9.1- Table-7, iv(Radious(r) of Normal type Tees -IS:3419)	-	2000	2000
6.2 & 9.1- Table-7, v( Minimum wall thicknes of Normal type Tees -IS:3419)	-	2000	2000
6.2 & 9.1- Table-8, ii(Inside Diameter of Collear for socketed type Tees - IS:3419)	-	2000	2000
6.2 & 9.1- Table-8, iii(a - of socketed type Tees -IS:3419)	-	2000	2000
6.2 & 9.1- Table-8, iv(l - of socketed type Tees -IS:3419)	-	2000	2000
6.2 & 9.1- Table-8, v(Minimum wall thicknes of socketed type Tees -IS:3419)	-	2000	2000
6.2 & 9.1- Table-9, ii(B - of spout Type Circular Boxes -IS:3419)	-	2000	2000
6.2 & 9.1- Table-9, iii(C - of spout Type Circular Boxes -IS:3419)	-	2000	2000
6.2 & 9.1- Table-9, iv(D - of spout Type Circular Boxes -IS:3419)	-	2000	2000
6.2 & 9.1- Table-9, v(E - of spout Type Circular Boxes -IS:3419)	-	2000	2000
6.2 & 9.1- Table-9, vi(F(Max) - of spout Type Circular Boxes -IS:3419)	-	2000	2000
6.2 & 9.1- Table-9, vii(F(Min) - of spout Type Circular Boxes -IS:3419)	-	2000	2000
6.2 & 9.1- Table-9, viii(G - of spout Type Circular Boxes -IS:3419)	-	2000	2000
6.2 & 9.1- Table-9, ix(t - of spout Type Circular Boxes -IS:3419)	-	2000	2000
10(Resistance to Heat -IS:3419)	-	2000	2000
11(Resistance to Burning - IS 3419)	-	2000	2000
12(Moisture Absorption - IS 3419)	-	2000	2000
13.2 &13.3(Resistance to chemival action in Acid solution - IS 3419)	-	2000	2000
13.2 &13.3(Resistance to chemival action in Alkaline solution - IS 3419)	-	2000	2000
14.1(Copper Test - IS 3419)	-	2000	2000
15, 15.3(Resistance to Oil - IS 3419)	-	2000	2000
15,15.4(Resistance to Oil - IS 3419)	-	2000	2000
16- Appendix-A(Resistance to Impact -IS 3419)	-	2000	2000
17.2(Electric Strength - IS 3419)	-	2000	2000
17.3(Insulation Resistance - IS 3419)	-	2000	2000

-
-

13043

BIS, Southern Regional Laboratory (SRL)

None

IS 11722 (1986)

Specification for thin walled flexible quick coupling pipes

4800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Pipe Manufacturing Process )	-
5,5.1 (Workmsnship &Finish)	-
6 &7 ; Table 1 (Dimension & Tolerance)	-
8 (Length)	-
12 (Straightness)	-
13.1 (Flattening Test,IS 2328)	-
13.2 (Tensile Test ,; IS 1608(P1))	-

-
" 2 nos.+coupler Excluding excl hydraulic test,chemical tests

13044

BIS, Southern Regional Laboratory (SRL)

None

IS 4224 (1972)

Specification for steel wire for staples, pins and clips (First Revision)

525 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (Freedom from defects , IS 4224)	-
5 (Sizes and Tolerances - IS 4224)	-
6 (Finish)	-
7.1 (Tensile Test - IS 1608(Pt -1))	-

-
" 5 m + 100g drill. Excluding chemical test

13045

BIS, Southern Regional Laboratory (SRL)

None

IS 903 (1993)

Specification for Fire Hose Delivery Couplings, Branch Pipe, Nozzles And Nozzle Spanner - Specificaion

Rs 3600/ View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 (Finish and workmanship)	-
4 (Marking)	-
5 (Delivery hose coupling)	-
5.3 (Size and Dimension )	-
7.3 (Hydraulic test requirement)	-
6 (Branch pipe)	-
6.3 (Hydraulic test requirement)	-
7 (Nozzle)	-
7.3 (Hydraulic test requirement)	-
8.2 (Shape & Dimensions of Spanner)	-
8.4 (Deflection test of Spanner)	-

-
" 1 pcs Excluding Except Hydraulic Test Requirement, Deflection Test Requirement,chemical tests

13046

BIS, Southern Regional Laboratory (SRL)

None

IS 13997 (2014)

Drums, large open top - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5, Table 1 (Dimensions-D2)	-
5, Table 1 (Dimensions-D3)	-
5, Table 1 (Dimensions-D4)	-
5, Table 1 (Dimensions-H1)	-
5, Table 1 (Dimensions-H5)	-
5, Table 1 (Dimensions-h2)	-
5, Table 1 (Dimensions-h3)	-
5, Table 1 (Dimensions-h4)	-
5, Table 1 (Dimensions-p1)	-
6.2 (The nominal thickness of steel sheets for body and ends )	-
7.1 ( CONSTRUCTION)	-
7.2 ( CONSTRUCTION)	-
7.3 ( CONSTRUCTION- Double Seam/Spiral Seam/Triple Seam Construction for Grade A Drums)	-
7.4 ( CONSTRUCTION-Spiral Seam/Triple Seam Construction for Grade B Drums)	-
7.5 ( CONSTRUCTION)	-
7.6 ( CONSTRUCTION)	-
7.7 ( CONSTRUCTION)	-
7.8 ( CONSTRUCTION)	-
7.9 (Closures)	-
7.10(a) (Closures)	-
7.10(b) (Closures)	-
7.10(c) (Closures)	-
7.10(d) (Closures)	-
7.11 ( Locking Ring)	-
8.1 (FINISH )	-
8.2 (FINISH )	-
9 (leakage test)	-

-
-

13047

BIS, Southern Regional Laboratory (SRL)

None

IS 2653 (2004)

Safety matches in boxes - Specification (Third Revision)

Rs 2570.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1.2.1 (Matchboxes)	-
5.1.2.2 (Matchboxes)	-
5.1.3 (Envelopment)	-
5.1.4 (Ease of Opening)	-
5.1.5 (Retention of Contents)	-
5.1.6.1 (Defective Match Boxes)	-
5.1.6.2 (Defective Match Boxes)	-
5.2.1.1 (Match Splints)	-
5.2.1.2 (Match Splints)	-
5.2.1.2 (Minimum thickness)	-
5.2.1.2 (Average thickness)	-
5.2.2 (Unserviceable Sticks)	-
5.3 (Match Boxes)	-
6.1.1 (Striking Performance - General)	-
6.1.2 (Safety Matches)	-
6.2 (Ignition Below 170 ˚C)	-
6.3 (Ignition Under Impact)	-
6.4.1 (Durability of the Striking Surface)	-
6.4.2 (Ignition of the Striking Surface)	-
6.4.3 (Loss of Burning Fragments)	-
6.5 (Damp Proofness for Match Boxes)	-

-
" 2 dozen

13048

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING AND TECHNOLOGY (CIPET):CSTS-BHOPAL

8100534

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

42325 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.10(Slow Crack Growth Rate)	-	5500	NIl
8.9 table-6(Elongation at Break)	-	1100	Nil
8.8(Tensile Strength for Butt-fusion)	-	1100	Nil
8.7(Density)	-	500	Nil
8.5 (Oxidation Induction Time)	-	2200	Nil
8.4( Melt Flow Rate)	-	1100	Nil
8.2(Longitudinal Reversion Test)	-	1100	Nil
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	1600	Nil
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	22000	Nil
7.4.1.2(Ovality)	-	250	Nil
Cl-7.4(Mean Outside Diameter (For upto 50 mm take 8 reading, above 50mm take 6 reading & average will be reported))	-	250	Nil
7.2(Length)	-	250	Nil
6.2.1(6.1.1 Identification Stripes)	-	250	Nil
6.2(Colour)	-	250	Nil
6.1.4(PIPE DESCRIPTION)	-	250	Nil
6.1.3 (PIPE DESCRIPTION)	-	0	Nil
6, 6.1.2(PIPE DESCRIPTION)	-	0	Nil
6, 6.1.1(PIPE DESCRIPTION)	-	0	Nil
6, 6.1(PIPE DESCRIPTION)	-	0	Nil
8.6(Overall migration)	-	2200	Nil
8.3(Carbon black)	-	925	Nil
5.3 (a)(Carbon Black Master Batch)	-	925	Nil
5.2(Polyethylene Resin)	-	2000	Nil

31 Dec, 2026

-
-

13049

URS PRODUCTS AND TESTING PVT LTD (F3), NOIDA

8136826

IS 16270 (2014)

Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test

331000 View breakup
Rs.3,31,000/- [10% Discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4(Marking)	-	9999.99	10% discount to BIS
4(Condition of use)	-	40000	10% discount to BIS
5.1(Mechanical Endurance)	-	20000	10% discount to BIS
5.2(Charge efficiency)	-	30000	10% discount to BIS
5.3(Deep discharge protection)	-	10000	10% discount to BIS
5.5(Dafety)	-	10000	10% discount to BIS
5.6(Documentation)	-	10000	10% discount to BIS
6(Finctional Characteristics)	-	4999.98	10% discount to BIS
7(General test conditions)	-	5000	10% discount to BIS
8.1(Capacity test)	-	15000	10% discount to BIS
8.2(Endurance test)	-	20000	10% discount to BIS
8.3(Charge retention test)	-	15000	10% discount to BIS
8.4(Cycle endurance in Photovoltaic application)	-	20000	10% discount to BIS
8.5(Sulphation Test)	-	40000	10% discount to BIS
8.6(Water loss test)	-	40000	10% discount to BIS
8.7(Non spillability)	-	30000	10% discount to BIS

31 Dec, 2026

-
Included w.e.f. 24-07-2020.Except Flooded Lead Acid Batteries.

13050

URS PRODUCTS AND TESTING PVT LTD (F3), NOIDA

8136826

IS 16221 : Part 2 (2015)

Safety of power converters for use in photovoltaic power systems: Part 2 particular requirements for inverters

190500 View breakup
Rs.1,90,500/- [10% Discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
14(Components)	-	10000	Test is in Inclusion
4(General Test Requireements)	-	40000	10% Discount to BIS
5(Marking and documentation)	-	5000	10% Discount to BIS
6(Environmental requirements and conditions)	-	50000	10% Discount to BIS
7(Protection against electric shock and energy hazards)	-	30000	10% Discount to BIS
9(Protection against Fire Hazards)	-	10000	10% Discount to BIS
11(Protection against Liquid Hazards)	-	10000	10% Discount to BIS
13(Physical Requirements)	-	10000	10% Discount to BIS
8(Protection against Mechanical Hazards)	-	10000	10% Discount to BIS
10(Protection against Sonic Pressure Hazards)	-	10000	10% Discount to BIS
12(Protection against Chemical Hazards)	-	10000	10% Discount to BIS

31 Dec, 2026

-
Excluding: Cl.10.2-Protection against sonic Pressure hazards, Cl.13.6.4-UV resistance, Cl.14 –Component. Included w.e.f. 24-07-2020.

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number