| 13081 |
BIS, Central Laboratory (CL)
| None
| IS 1912 (1984) |
Specification for country jute twine (second revision) |
- |
Rs. 4560/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 2 / 2.1 (MANUFACTURE / Jute Fibre —) |
- |
|
|
|
| 2.2 (Yarn) |
- |
|
|
|
| 2.3 (Twine) |
- |
|
|
|
| 2.4 (Skein) |
- |
|
|
|
|
- |
-
- |
| 13082 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 21 (1992) |
Wrought aluminium and aluminium alloys for manufacture of utensils specification (Fourth Revision) |
- |
Rs.6600/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.2,
Table 2 of IS:21 (Designation & Condition 64430, WP') (Bend Test (Radius of Bend)) |
- |
|
|
|
| 4.2,
Table 2 of IS:21 (Designation & Condition 64430, WP') (Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
|
|
|
| 4.2,
Table 2 of IS:21 (Designation & Condition 64430, WP') (Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
|
|
|
| 4.2,
Table 2 of IS:21 (Designation & Condition 64430, WP') (Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
|
|
|
| 4.2,
Table 2 of IS:21 (Designation & Condition 64430, WP') (Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
|
|
|
| 4.2,
Table 2 of IS:21 (Designation & Condition 64430, WP') (Tensile Strength) |
- |
|
|
|
| 4.2,
Table 2 of IS:21 (Designation & Condition 64430, WP') (0.2 Percent Proof Stress) |
- |
|
|
|
| 4.2,
Table 2 of IS:21 (Designation & Condition 64430, 'W') (Bend Test (Radius of Bend)) |
- |
|
|
|
| 4.2,
Table 2 of IS:21 (Designation & Condition 64430, 'W') (Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
|
|
|
| 4.2,
Table 2 of IS:21 (Designation & Condition 64430, 'W') (Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
|
|
|
| 4.2,
Table 2 of IS:21 (Designation & Condition 64430, 'W') (Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
|
|
|
| 4.2,
Table 2 of IS:21 (Designation & Condition 64430, 'W') (Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
|
|
|
| 4.2,
Table 2 of IS:21 (Designation & Condition 64430, 'W') (Tensile Strength) |
- |
|
|
|
| 4.2,
Table 2 of IS:21 (Designation & Condition 64430, 'W') (0.2 Percent Proof Stress) |
- |
|
|
|
| 4.2,
Table 2 of IS:21 (Designation & Condition 64430, 'O') (Bend Test (Radius of Bend)) |
- |
|
|
|
| 4.2,
Table 2 of IS:21 (Designation & Condition 64430, 'O') (Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
|
|
|
| 4.2,
Table 2 of IS:21 (Designation & Condition 64430, 'O') (Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
|
|
|
| 4.2,
Table 2 of IS:21 (Designation & Condition 64430, 'O') (Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
|
|
|
| 4.2,
Table 2 of IS:21 (Designation & Condition 64430, 'O') (Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
|
|
|
| 4.2,
Table 2 of IS:21 (Designation & Condition 64430, 'O') (Tensile Strength) |
- |
|
|
|
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H4') (Bend Test (Radius of Bend)) |
- |
|
|
|
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H4') (Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
|
|
|
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H4') (Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
|
|
|
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H4') (Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
|
|
|
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H4') (Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
|
|
|
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H4') (Tensile Strength) |
- |
|
|
|
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H3') (Bend Test (Radius of Bend)) |
- |
|
|
|
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H3') (Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
|
|
|
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'H3') (Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
|
|
|
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H3') (Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
|
|
|
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H3') (Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
|
|
|
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H3') (Tensile Strength) |
- |
|
|
|
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H3') (0.2 Percent Proof Stress) |
- |
|
|
|
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H2') (Bend Test (Radius of Bend)) |
- |
|
|
|
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H2') (Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
|
|
|
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H2') (Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
|
|
|
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H2') (Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
|
|
|
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H2') (Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
|
|
|
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H2') (Tensile Strength) |
- |
|
|
|
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'H2') (0.2 Percent Proof Stress) |
- |
|
|
|
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H1') (Bend Test (Radius of Bend)) |
- |
|
|
|
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H1') (Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
|
|
|
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H1') (Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
|
|
|
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H1') (Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
|
|
|
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H1') (Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
|
|
|
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H1') (Tensile Strength) |
- |
|
|
|
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H1') (0.2 Percent Proof Stress) |
- |
|
|
|
| 4.2,
Table 1of IS:21 (Designation 64430) (Titanium and or other grain refining elements) |
- |
|
|
|
| Cl.4.2 Table 1 (Silicon - IS 504 and its parts or any other intrumental/chemical methods) |
- |
|
|
|
| Cl.4.2 Table 1 (Iron - IS 504 and its parts or any other intrumental/chemical methods) |
- |
|
|
|
| Cl.4.2 Table 1 (Copper - IS 228 and its parts or any other intrumental/chemical methods) |
- |
|
|
|
| Cl.4.2 Table 1 (Manganese - IS 228 and its parts or any other intrumental/chemical methods) |
- |
|
|
|
| Cl.4.2 Table 1 (Magnesium - IS 228 and its parts or any other intrumental/chemical methods) |
- |
|
|
|
| Cl.4.2 Table 1 (Chromium - IS 228 and its parts or any other intrumental/chemical methods) |
- |
|
|
|
| Cl.4.2 Table 1 (Zinc - IS 228 and its parts or any other intrumental/chemical methods) |
- |
|
|
|
| Cl.4.2 Table 1 (Titanium - IS 228 and its parts or any other intrumental/chemical methods) |
- |
|
|
|
|
- |
-
Except Aluminium |
| 13083 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 4368 (1967) |
Specification for alloy steel billets, blooms and slabs for forging for general engineering purposes |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 8 (Diameter, Ovality & Weight) |
- |
|
|
|
| Cl 11 (Hardness & Tensile Test) |
- |
|
|
|
| Cl 11.6 (Additional Tests) |
- |
|
|
|
|
- |
-
Except V, Al, Sn |
| 13084 |
BIS, Central Laboratory (CL)
| None
| IS 623 (2008) |
Bicycle - Bicycle frames - Specification (Third Revision) |
- |
Rs. 3477/- excluding Threads. View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4 (DIMENSIONS) |
- |
|
|
|
| 4.1 (FRAME TUBES ) |
- |
|
|
|
| 5 (MANUFACTURE) |
- |
|
|
|
| 6 (FINISH) |
- |
|
|
|
| 7.1 (a) TRUENESS OF FRAME) |
- |
|
|
|
| 7.3 (d) TEST FOR FINISH) |
- |
|
|
|
|
- |
-
Excluding 4.2 Screw Threads, 7.1 Trueness of Frame, 7.2 Impact Test on Frame-Fork Assembly |
| 13085 |
BIS, Central Laboratory (CL)
| None
| IS 6803 (1972) |
Specification for special proofed canvas and duck |
- |
11297 View breakup
Rs. 11297/- + testing charges as per referred ISS (excluding Pressure head test).
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl. 3.2.3 (pH Value) |
- |
|
|
|
| Cl. 3.2.1 , Appendix A-1 (Proofing Content) |
- |
|
|
|
|
- |
-
- |
| 13086 |
BIS, Central Laboratory (CL)
| None
| IS 9271 (2004) |
Unplasticized polyvinyl chloride (UPVC) single wall corrugated pipes for drainage - Specification (First Revision) |
- |
1800/ View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 8.2 (Density-When tested in accordance with ]S 13360 (Part 3/Sec 1), the densi of the pipe shall be between 1.40 and 1.46 gm/cm3 .) |
- |
|
|
|
| 8.1.1 (Visual Appearance, Workmanship and
Finish) |
- |
|
|
|
| 8.1.2 (Visual Appearance, Workmanship and
Finish) |
- |
|
|
|
| 7.2, 8 (Wall Thickness) |
- |
|
|
|
| 7, Table 1 (DIMENSIONS AND TOLERANCE-The nominal outside diameter and tolerances of the corrugated pipes shall be as per Table 1) |
- |
|
|
|
| 7.4.3 (Perforation Requirement-The heght of corrugation -The depth of corrugations shall be 3 percent, Min of nominal outside diameter (dn).) |
- |
|
|
|
|
- |
-
Excluding Test Fcility not available for Cl 8.3 Pipe stiffness, Cl 8.4 Impact strength at o Degree C, Cl 8.5 Elongation Test, Cl 8.6 Bending Test, Cl 8.7 Joints (optional) |
| 13087 |
BIS, Central Laboratory (CL)
| None
| IS 14106 (2018) |
Direct action hand pumps - Specification (First Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.1 (Visual tests: All the pumps shall be examined for workmanship, finish and visual defects.) |
- |
|
|
|
| 6.2.2 (i) Aligment of groove in top guide bush with respect to the nuts welded on pump body) |
- |
|
|
|
| 6.2.2 (ii) Aligment of handle nut with pipe for concentricity) |
- |
|
|
|
| 6.2.2 (iii) Location of holes in the pump head flange with respect to the direction of the spout) |
- |
|
|
|
| 6.2.2 (iv) Reasonable flatness of the flanges to provide proper matching of the holes to ensure unrestricted insertion of the bolts ) |
- |
|
|
|
| 6.2.2 (v) Matching of faces indicated in respective figures of piston plate, follower plate and foot valve body) |
- |
|
|
|
| 6.2.2 (vi) Concentricity of the two internal diameter of the reducing socket) |
- |
|
|
|
| 6.3.1 (Routine test) |
- |
|
|
|
| 6.4 (Test for Joints) |
- |
|
|
|
| 6.4 (Pump Rod) |
- |
|
|
|
| 6.4 (Riser Pipe) |
- |
|
|
|
| 6.4 (Upper casing and lower casing) |
- |
|
|
|
| 6.4 (Load test ) |
- |
|
|
|
| 4.4 & Table 2 (Bell Dimensions, mm) |
- |
|
|
|
| 4.4 & Table 2 (Bell Dimensions for Upper casing pipe) |
- |
|
|
|
| 4.4 & Table 2 (a)Socket Depth) |
- |
|
|
|
| 4.4 & Table 2 (b) Mean socket internal dia at mouth) |
- |
|
|
|
| 4.4 & Table 2 (c) Mean socket internal diameter at root ) |
- |
|
|
|
| 4.4 & Table 2 (Bell Dimensions for Lower casing pipe) |
- |
|
|
|
| 4.4 & Table 2 (a)Socket Depth) |
- |
|
|
|
| 4.4 & Table 2 (b) Mean socket internal dia at mouth) |
- |
|
|
|
| 4.4 & Table 2 (c) Mean socket internal diameter at root ) |
- |
|
|
|
| 4.4 & Table 2 (Bell Dimensions for Sand Trap) |
- |
|
|
|
| 4.4 & Table 2 (a)Socket Depth) |
- |
|
|
|
| 4.4 & Table 2 (b) Mean socket internal dia at mouth) |
- |
|
|
|
| 4.4 & Table 2 (c) Mean socket internal diameter at root ) |
- |
|
|
|
| 6.2.3 (Dimensional tests, Pump head, mm) |
- |
|
|
|
| 6.2.3 (Pump head flange) |
- |
|
|
|
| 6.2.3 (Pump stand) |
- |
|
|
|
| 6.2.3 (Intermediate flange) |
- |
|
|
|
| 6.2.3 (Grommet) |
- |
|
|
|
| 6.2.3 (Shore Hardness on Scale A) |
- |
|
|
|
| 6.2.3 (Top Guide Bush) |
- |
|
|
|
| 6.2.3 (Handle) |
- |
|
|
|
| 6.2.3 (Handle Cushion Top) |
- |
|
|
|
| 6.2.3 (Shore Hardness on Scale A) |
- |
|
|
|
| 6.2.3 (Bottom Cushion) |
- |
|
|
|
| 6.2.3 (Shore Hardness on Scale A) |
- |
|
|
|
| 6.2.3 (Handle Retainer) |
- |
|
|
|
| 6.2.3 (Top Connector) |
- |
|
|
|
| 6.2.3 (Male Adapter) |
- |
|
|
|
| 6.2.3 (Female Adapter) |
- |
|
|
|
| 6.2.3 (Piston Plate) |
- |
|
|
|
| 6.2.3 (Follower Plate) |
- |
|
|
|
| 6.2.3 (Piston Fap Valve) |
- |
|
|
|
| 6.2.3 (Shore Hardness on Scale A) |
- |
|
|
|
| 6.2.3 (Cup Seal) |
- |
|
|
|
| 6.2.3 (Shore Hardness on Scale A) |
- |
|
|
|
| 6.2.3 (Bottom Connector) |
- |
|
|
|
| 6.2.3 (Grapple Parts) |
- |
|
|
|
| 6.2.3 (Foot Valve Body) |
- |
|
|
|
| 6.2.3 (O Ring) |
- |
|
|
|
| 6.2.3 (Shore Hardness on Scale A) |
- |
|
|
|
| 6.2.3 (Flap Valve) |
- |
|
|
|
| 6.2.3 (Shore Hardness on Scale A) |
- |
|
|
|
| 6.2.3 (Foot valve Guide) |
- |
|
|
|
| 6.2.3 (Threaded Coupler(M)) |
- |
|
|
|
| 6.2.3 (Threaded Coupler(F)) |
- |
|
|
|
| 6.2.3 (Riser Pipe Centralizer) |
- |
|
|
|
| 6.2.3 ( Shore Hardness on Scale A) |
- |
|
|
|
| 6.2.3 (O Ring) |
- |
|
|
|
| 6.2.3 (Foot Valve Retainer) |
- |
|
|
|
| 6.2.3 (Rubber Seat) |
- |
|
|
|
| 6.2.3 (Shore Hardness on Scale A) |
- |
|
|
|
| 6.2.3 (Reducing Sdocket (Alternate Design)) |
- |
|
|
|
| 6.2.3 (Well Screen (alternate)) |
- |
|
|
|
| 6.2.3 (Screen Coupler) |
- |
|
|
|
| 6.2.3 (Sand Trap) |
- |
|
|
|
| 6.2.3 (Cutter) |
- |
|
|
|
| 6.2.3 (Retrieving Rod) |
- |
|
|
|
| 6.2.3 (Combination Spanner) |
- |
|
|
|
| 5.2(a) (Mass of Zinc coating,g/m2) |
- |
|
|
|
| 5.2(a) (Adhesion of coating) |
- |
|
|
|
| 5.2(a) (Galvanizing of Head) |
- |
|
|
|
| 5.2(b) (Galvanizing of Handle) |
- |
|
|
|
| 5.2(b) (Mass of Zinc coating,g/m2) |
- |
|
|
|
| 5.2(b) (Adhesion of coating) |
- |
|
|
|
| 5.2© (Galvanizing of Stand) |
- |
|
|
|
| 5.2© (Mass of Zinc coating,g/m2) |
- |
|
|
|
| 5.2© (Adhesion of coating) |
- |
|
|
|
| 5.2(d) (Galvanizing of Intermediate Flange) |
- |
|
|
|
| 5.2(d) (Mass of Zinc coating,g/m2) |
- |
|
|
|
| 5.2(d) (Adhesion of coating) |
- |
|
|
|
| 4.2 (Mean Outside Diameter) |
- |
|
|
|
| 4.2 (Wall Thickness) |
- |
|
|
|
| 4.2 (Length) |
- |
|
|
|
| 4.2 (Visual Appearance) |
- |
|
|
|
| 4.2 (Test for Internal Diameter) |
- |
|
|
|
| 4.2 (Specific Gravity) |
- |
|
|
|
|
- |
-
- |
| 13088 |
BIS, Central Laboratory (CL)
| None
| IS 702 (1988) |
Specification for indusrial bitumen (Second Revision) |
- |
- View breakup
Hence complete testing charges for the product are Rs.6300..00
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1 and 6.1 Table 1 (Specific Gravity, 85/25) |
- |
|
|
|
| 5.1 and 6.1 Table 1 (Specific Gravity, 85/40) |
- |
|
|
|
| 5.1 and 6.1 Table 1 (Specific Gravity, 90/15) |
- |
|
|
|
| 5.1 and 6.1 Table 1 (Specific Gravity, 115/15) |
- |
|
|
|
| 5.1 and 6.1 Table 1 (Specific Gravity 135/10) |
- |
|
|
|
| 5.1 and 6.1 Table 1 (Specific Gravity 155/6) |
- |
|
|
|
|
- |
-
- |
| 13089 |
BIS, Central Laboratory (CL)
| None
| IS 7283 (1992) |
Hot - Rolled bars for the production of bright bars and machined parts for engineering applications specification (First Revision) |
- |
Rs 1500/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 6 (Workmanship) |
- |
|
|
|
| Cl 7 (Diameter & Out Of Round) |
- |
|
|
|
| Cl 5 (Material Test) |
- |
|
|
|
|
- |
-
Since the composition of steel is mutually agreed basis , as such element to be tested with specified requirement and tolerances if any may please be declared with method of testing. Sample Size 5 pcs of 5x5 cm having dia> 3mm and thickness > 0.8 mm.
Excluding i] cl 8 decarburization, ii] cl 11 grain size |
| 13090 |
BIS, Central Laboratory (CL)
| None
| IS 16088 (2012) |
Chlorinated polyvinyl chloride (CPVC) pipes for automatic sprinkler fire extinguishing system - Specification |
- |
5400 View breakup
Rs. 5400/- (excluding Compound chlorine content, Fire exposure test, Flammability test, Resistance to external blows at 0oC, Kinking resistance test and CPVS fire sprinkler pipes and fittings) + testing charges as per referred ISS
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 9.5
IS 12235(Part 2) (Vicat Softening Temperature:
When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen
shall not be less than 110°C.) |
- |
|
|
|
| 9.3 (Reversion test :
) |
- |
|
|
|
| 9.5 (Density) |
- |
|
|
|
| 8 (Pipe Ends) |
- |
|
|
|
| 7.1.1 IS 12235 (Part 1)
Table 1 (Mean outside Diameter) |
- |
|
|
|
| 7.1.1.1
IS 12235 (Part 1)
Table 1 (Outside Diameter at any point) |
- |
|
|
|
| 7.1.2 (Wall Thickness) |
- |
|
|
|
| 10.3 (Flattening) |
- |
|
|
|
| 10.4 (Tensile Strength) |
- |
|
|
|
| 9.1 (Visual Appearance) |
- |
|
|
|
| 5 (Classification of pipes) |
- |
|
|
|
|
- |
-
Excluding Testing Facility not avaialble for Cl.9.6 Fire exposure test, cl. 9.7 Flammability Test, cl.10.1 hydrostatic Characterstics, Cl 10.2 resistance to external Blow At 0 °C, Cl. 10.3 flattening Test, Cl.10.5 Kinking Resistance Test, Cl. 10.7 Vibration Test (Type Test) |
| 13091 |
BIS, Central Laboratory (CL)
| None
| IS 6046 (1982) |
Specification for gypsum for agricultural use (First Revision) |
- |
3881.00 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 2.2 (Sodium Content) |
- |
|
|
|
| 2.2 (Calcium Sulphate Content) |
- |
|
|
|
| 2.1 (Fineness) |
- |
|
|
|
| 2.2 (Sodium Content) |
- |
|
|
|
| 2.2 (Calcium Sulphate Content) |
- |
|
|
|
|
- |
-
- |
| 13092 |
BIS, Central Laboratory (CL)
| None
| IS 14268 (2022) |
Uncoated stress relieved low relaxation seven-wire (ply) strand for prestressed concrete -Specification (Second Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1.2 (Carbon) |
- |
|
|
|
| 4.1.2 (Silicon) |
- |
|
|
|
| 4.1.2 (Manganese) |
- |
|
|
|
| 4.1.2 (Sulphur) |
- |
|
|
|
| 4.1.2 (Phosphorus) |
- |
|
|
|
| 4.1.2 (Chromium) |
- |
|
|
|
| 4.1.2 (Nickel) |
- |
|
|
|
| 4.1.2 (Molybdenum) |
- |
|
|
|
| 4.1.2 (Copper) |
- |
|
|
|
| 4.1.2 (Aluminum) |
- |
|
|
|
| 4.1.2 (Sulphur + Phosphorus) |
- |
|
|
|
| 4.1.2 (Boron) |
- |
|
|
|
| 4.1.2 (Titanium) |
- |
|
|
|
| 4.1.2 (Niobium) |
- |
|
|
|
| 4.1.2 (Vanadium) |
- |
|
|
|
| 4.1.2 (Titanium+Niobium+Vanadium) |
- |
|
|
|
| 4.1.2 (Nitrogen) |
- |
|
|
|
| 4.5 (Workmanship and Finish) |
- |
|
|
|
| 6(Table 2) (Diameter) |
- |
|
|
|
| 6(Table 2) (Tensile Strength) |
- |
|
|
|
| 6(Table 2) (Cross Sectional Area) |
- |
|
|
|
| 6(Table 2) (Mass Per Meter) |
- |
|
|
|
| 4.5 (Workmanship and Finish) |
- |
|
|
|
|
- |
-
Excluding i] cl 6.2.2 breaking strength & 0.2 % Proof stress, ii] cl 6.2.3 elongation, iii] cl 6.2.4 relaxation properties |
| 13093 |
BIS, Central Laboratory (CL)
| None
| IS 916 (2000) |
Square tins for solid products - Specification (Fourth Revision) |
- |
4950 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1 (Capacity) |
- |
|
|
|
| 4.2 (Dimension and Tolerances) |
- |
|
|
|
| 4.3.1 (Nominal Thickness) |
- |
|
|
|
| 4.3.2 (Handle wire diameter) |
- |
|
|
|
| 4.3.2 (Handle wire material) |
- |
|
|
|
| 4.4.1 (Body) |
- |
|
|
|
| 4.4.2 (Sides) |
- |
|
|
|
| 4.4.3 (Top and Bottom) |
- |
|
|
|
| 4.4.4 (Top and Bottom embossing) |
- |
|
|
|
| 4.4.5 (Handle) |
- |
|
|
|
| 4.4.6 (Closure) |
- |
|
|
|
| 4.4.7 (Supply condition) |
- |
|
|
|
| 4.4.8 (Internal Finish) |
- |
|
|
|
| 4.4.9 (External Treatment) |
- |
|
|
|
| 5.1 (Air-Pressure Test) |
- |
|
|
|
| 5.2 (Handle Pull Test) |
- |
|
|
|
|
- |
-
Excluding 5.1 Air-Pressure Test, 5.2 Handle Pull Test, |
| 13094 |
BIS, Central Laboratory (CL)
| None
| IS 9282 (2002) |
Wire ropes and strands for suspension bridges - Specification (First Revision) |
- |
Rs. 3000/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.2.1 ( MATERIAL- Requirements of Wire -Dimensional Limits and Tolerances
) |
- |
|
|
|
| 4.2.2 (Tensile Test) |
- |
|
|
|
| 4.3 (Elongation Test ) |
- |
|
|
|
| 4.5.1 (Galvanizing) |
- |
|
|
|
| 4.5.2 (Wrap Tes) |
- |
|
|
|
| 5 (GENERAL REQUIREMENTS General requirements shall be according to IS 6594.) |
- |
|
|
|
| 6.1 (JOINTS) |
- |
|
|
|
| 7.1 ( DIRECTION OF LAY) |
- |
|
|
|
| 8.1 (LENGTH OF LAY) |
- |
|
|
|
| 10. table 1 to 11 (MINIMUM BREAKING FORCE ) |
- |
|
|
|
| Clasuse - 4 ( CARBON) |
- |
|
|
|
| Clasuse - 4 (SULPHUR) |
- |
|
|
|
| Clasuse - 4 (PHOSPHURS) |
- |
|
|
|
| Clasuse - 4 (MANGANESE) |
- |
|
|
|
| Clasuse - 4 (SILICON) |
- |
|
|
|
| Clasuse - 4 ( ALUMINIUM) |
- |
|
|
|
| Clasuse - 4 (NITROGEN) |
- |
|
|
|
| Clasuse - 4 (Nickel) |
- |
|
|
|
| Clasuse - 4 (Chromium) |
- |
|
|
|
| Clasuse - 4 (Molybdenum) |
- |
|
|
|
| Clasuse - 4 (NIOBIUM) |
- |
|
|
|
| Clasuse - 4 (VANADIUM) |
- |
|
|
|
| Clasuse - 4 (TITANIUM) |
- |
|
|
|
|
- |
-
EXCLUDING -; i] cl 10 minimum breaking force, ii] cl 11 elongation or stretch |
| 13095 |
BIS, Central Laboratory (CL)
| None
| IS 4109 (1967) |
Specification for kadahies |
- |
Rs. 750/- and testing charges as per referred Iss View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 2 (Materials) |
- |
|
|
|
| 3 (a) Round Shape / Bowl Shape) |
- |
|
|
|
| 3 (b) Nominal dia. at top D1 mm) |
- |
|
|
|
| 3 (c) Nominal overall Height H1 mm) |
- |
|
|
|
| 3 (d) Thickness at bottom mm Min) |
- |
|
|
|
| 4 (Manufacture and Workmanship) |
- |
|
|
|
| 6 (Test) |
- |
|
|
|
|
- |
-
- |
| 13096 |
BIS, Central Laboratory (CL)
| None
| IS 285 (1992) |
Laundry soaps - Specification (Third Revision) |
- |
5300 View breakup
For Type 1 -Rs.6000/-, For Type 2 Gr.1- Rs.4800/-, For Type 2 Gr.2-Rs.5100/-
Average testing charges (all types and grades)-Rs.5300.00
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.4, Table-1 (ix) Type-2 (Built soap) Gr-2 (LSD/NSD content, IS 4955) |
- |
|
|
|
| 5.4, Table-1 (viii) Type-2 (Built soap) Gr-1 & Gr-2 (Chloride (as sodium chloride), IS 286) |
- |
|
|
|
| 5.4, Table-1 (viii) Type-1 (Pure soap) (Chloride (as sodium chloride), IS 286) |
- |
|
|
|
| 5.4, Table-1 (vii) Type-1 (Pure soap) (Glycerol, IS 286) |
- |
|
|
|
| 5.4, Table-1 (v) Type-2 (Built soap) Gr-1 (Matter insoluble in alcohol, IS 286) |
- |
|
|
|
| 5.4, Table-1 (v) Type-1 (Pure soap) (Matter insoluble in alcohol, IS 286) |
- |
|
|
|
| 5.4, Table-1 (iv) (Free caustic alkali, as sodium hydroxide (NaOH), IS 286) |
- |
|
|
|
| 5.4, Table-1 (iii) (Unsaponified fatty matter, IS 286) |
- |
|
|
|
| 5.4, Table-1 (ii) (Rosin acids, percent by mass of total fatty matter, IS 286 ) |
- |
|
|
|
| 5.4, Table-1 (i) Type-2 (Built soap) Gr-2 (Total fatty matter, IS 286) |
- |
|
|
|
| 5.4, Table-1 (i) Type-2 (Built soap) Gr-1 (Total fatty matter, IS 286) |
- |
|
|
|
| 5.4, Table-1 (i) Type-1 (Pure soap) (Total fatty matter, IS 286) |
- |
|
|
|
| 5.3 (Odour and Lathering Properties, IS 286) |
- |
|
|
|
| 5.4, Table-1 (ix) Type-2 (Built soap) Gr-2 (LSD/NSD content, IS 4955) |
- |
|
|
|
| 5.4, Table-1 (viii) Type-2 (Built soap) Gr-1 & Gr-2 (Chloride (as sodium chloride), IS 286) |
- |
|
|
|
| 5.4, Table-1 (viii) Type-1 (Pure soap) (Chloride (as sodium chloride), IS 286) |
- |
|
|
|
| 5.4, Table-1 (v) Type-2 (Built soap) Gr-1 (Matter insoluble in alcohol, IS 286) |
- |
|
|
|
| 5.4, Table-1 (v) Type-1 (Pure soap) (Matter insoluble in alcohol, IS 286) |
- |
|
|
|
| 5.4, Table-1 (iv) (Free caustic alkali, as sodium hydroxide (NaOH), IS 286) |
- |
|
|
|
| 5.4, Table-1 (iii) (Unsaponified fatty matter, IS 286) |
- |
|
|
|
| 5.4, Table-1 (ii) (Rosin acids, percent by mass of total fatty matter, IS 286 ) |
- |
|
|
|
| 5.4, Table-1 (i) Type-2 (Built soap) Gr-2 (Total fatty matter, IS 286) |
- |
|
|
|
| 5.4, Table-1 (i) Type-2 (Built soap) Gr-1 (Total fatty matter, IS 286) |
- |
|
|
|
| 5.4, Table-1 (i) Type-1 (Pure soap) (Total fatty matter, IS 286) |
- |
|
|
|
| 5.3 (Odour and Lathering Properties, IS 286) |
- |
|
|
|
|
- |
-
- |
| 13097 |
BIS, Central Laboratory (CL)
| None
| IS 9165 : Part 2 (1992) |
Surgical instruments - Needles, suture: Part 2 eyed needles - Sizes, shapes and dimensions |
- |
Rs.10030/ View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1, Table 1 (Dimensions of Eyed Suture Needles) |
- |
|
|
|
| 3.1, Table 1 (Dimensions of Eyed Suture Needles) |
- |
|
|
|
|
- |
-
- |
| 13098 |
BIS, Central Laboratory (CL)
| None
| IS 12650 (2018) |
Textiles – Jute bags for packing 50 kg foodgrains – Specification (third revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4-4.2 (Manufacture-The number of stitches per decimeter shall be 10 ±1.) |
- |
|
|
|
| 4-4.3 (Manufacture-Safety Stitch-The number of safety union stitches per decimetre shall be10 ± 1.) |
- |
|
|
|
| 4-4.1 (MANUFACTURE- The bags shall be made from single piece of twill weave jute sacking of uniform construction having
nominal mass of 579 g/m2 as given below with warp running along the length of the bag:) |
- |
|
|
|
| 4-4.2 (Manufacture-The number of stitches per decimeter shall be 10 ±1.) |
- |
|
|
|
| 4-4.3 (Manufacture-Safety Stitch-The number of safety union stitches per decimetre shall be10 ± 1.) |
- |
|
|
|
| 4-4.1 (MANUFACTURE- The bags shall be made from single piece of twill weave jute sacking of uniform construction having
nominal mass of 579 g/m2 as given below with warp running along the length of the bag:) |
- |
|
|
|
| 4-4.1-a) (MANUFACTURE) |
- |
|
|
|
| 4-4.1-b) (MANUFACTURE) |
- |
|
|
|
| 4-4.1 (MANUFACTURE) |
- |
|
|
|
| 4-4.2 (Manufacture) |
- |
|
|
|
| 4-4.3 (Manufacture-Safety Stitch
) |
- |
|
|
|
| 4-4.4 (Manufacture-Hemming at the Mouth ) |
- |
|
|
|
| 4-4.5 (Manufacture- Freedom from Defects
) |
- |
|
|
|
| 5-5.1-Table 1-Sr. no. i) (SPECIFIC REQUIREMENTS-Dimensions (see Note 1) Cl. 8.3.2 of IS 9113 a) Out side Length , cm 94 (For both type A & Type B) Tolerance + 4 / -0 cm) |
- |
|
|
|
| 5-5.1-Table 1-Sr. no. i) (SPECIFIC REQUIREMENTS-Dimensions (see Note 1) Cl. 8.3.2 of IS 9113 b) Outside width, cm 57 (For both type A & Type B) Tolerance + 4 / -0 cm) |
- |
|
|
|
| 5-5.1-Table 1-Sr. no.i i) (SPECIFIC REQUIREMENTS-Cl. 8.4.2 of IS 9113 Ends/dm Type A 46 + 2 /Type B 76 + 4 / -3) |
- |
|
|
|
| 5-5.1-Table 1-Sr. no.iii) (SPECIFIC REQUIREMENTS-Cl. 8.4.2 of IS 9113 Picks/dm Type A 50 (2 x 25) / Type B 28 + 2) |
- |
|
|
|
| 5-5.1-Table 1-Sr. no.iv) (SPECIFIC REQUIREMENTS-Cl. 8.5.2 of IS 9113 Corrected Mass/bag, g ( See Note 2) For both Type A & Type B 665 + 8.0 / -6.0 percent) |
- |
|
|
|
| 5-5.1-Table 1-Sr. No.v) (SPECIFIC REQUIREMENTS-Cl. 8.6.2 of IS 9113 Average breaking strength of sacking (ravelled-strip method, 10 cm × 20 cm), Min, N (kgf): a ) Warpway- 1570 (160) for both type A & Type B) |
- |
|
|
|
| 5-5.1-Table 1-Sr. No.v) (SPECIFIC REQUIREMENTS-Cl. 8.6.2 of IS 9113 Average breaking strength of sacking (ravelled-strip method, 10 cm × 20 cm), Min, N (kgf): b ) Weftway- 1420 (145) for both type A & Type B) |
- |
|
|
|
| 5-5.1-Table 1-Sr. No.vi) (SPECIFIC REQUIREMENTS-Cl. 8.7 of IS 9113 Average side seam strength
(5 cm ×20 cm raveled strip), Min, N (kgf): 490 (50) for both type A & Type B) |
- |
|
|
|
|
- |
-
- |
| 13099 |
BIS, Central Laboratory (CL)
| None
| IS 9471 : Part 7 (2000) |
Modular lower limb orthotic components - Specification: Part 7 orthotic joint bars, ankle and knee (Upper And Lower) |
- |
Rs 1510/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1 (SHAPE AND DIMENSIONS) |
- |
|
|
|
| 4.2 (SHAPE AND DIMENSIONS) |
- |
|
|
|
| 6.1 (Workmanship and Finish) |
- |
|
|
|
| 6.2 (Workmanship and Finish) |
- |
|
|
|
| 7.0 (Bend Test) |
- |
|
|
|
|
- |
-
- |
| 13100 |
BIS, Central Laboratory (CL)
| None
| IS 12594 (1988) |
Hot - Dip zinc coating on structural steel bars for concrete reinforcement - Specification |
- |
2200 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1 , Table 1 (Mass of Zinc coating , IS 6745) |
- |
|
|
|
| 5.2 (Freedom from defects , IS 2629) |
- |
|
|
|
| 5.3 (Adhesion of Galvanized coating) |
- |
|
|
|
| Clause - 4, 4.1 (CARBON) |
- |
|
|
|
| Clause - 4, 4.1 (SULPHUR) |
- |
|
|
|
| Clause - 4, 4.1 (PHOSPHURS) |
- |
|
|
|
| Clause - 4, 4.1 (MANGANESE) |
- |
|
|
|
| Clause - 4, 4.1 (SILICON) |
- |
|
|
|
| Clause - 4, 4.1 (ALUMINIUM) |
- |
|
|
|
| Clause - 4, 4.1 (NITROGEN) |
- |
|
|
|
|
- |
-
EXCLUDING -; i] cl 5.4 chromating |
| 13101 |
BIS, Central Laboratory (CL)
| None
| IS 8074 (1990) |
Monocrotophossl - Specification (Second Revision) |
- |
Rs.2750.00 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.2 (Physical) |
- |
|
|
|
| 3.2.1 (Description) |
- |
|
|
|
| 3.2.2 (Cold Test) |
- |
|
|
|
| 3.2.3 (Flash Point ( Abel )) |
- |
|
|
|
| 3.3 (Chemical) |
- |
|
|
|
| 3.3.1 (Monocrotophos Content) |
- |
|
|
|
| 3.3.1.1 (actual value of the monocrotophos
content) |
- |
|
|
|
| 3.3.1.2 (average monocrotophos content) |
- |
|
|
|
| 3.3.2 (Free Aceto-Acetic Acid Monomethyl-amide
( MMA ) Content) |
- |
|
|
|
| 3.3.3 (Acidit) |
- |
|
|
|
|
- |
-
- |
| 13102 |
BIS, Central Laboratory (CL)
| None
| IS 9585 (1980) |
Specification for lactometers |
- |
Rs 2400.00 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 2.1 (Size) |
- |
|
|
|
| 6.1, Table 1 (Length in mm of the bulb) |
- |
|
|
|
|
- |
-
- |
| 13103 |
BIS, Central Laboratory (CL)
| None
| IS 2414 (2005) |
Cycle and rickshaw pneumatic tyres - Specification (Fourth Revision) |
- |
Rs.8630/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1 (Type) |
- |
|
|
|
| 4.2 (Designation) |
- |
|
|
|
| 5.1 & 5.2 (Dimensions) |
- |
|
|
|
| 6.1 (Construction) |
- |
|
|
|
| 6.2 (Tyre Cord) |
- |
|
|
|
| 6.3 (Tyre Casing Strength) |
- |
|
|
|
| 6.4 (Bead Wire Joint) |
- |
|
|
|
| 6.5 (Requirements of Ruber Compound) |
- |
|
|
|
| 6.6 (Adhesion test) |
- |
|
|
|
|
- |
-
EXCLUDING -; Performance test |
| 13104 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 844 : Part 1 (1979) |
Specification for screwdrivers: Part 1 techincal supply conditions (Second Revisionn) |
- |
375 + ferrule material testing per IS:513 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4 (Hardness) |
- |
|
|
|
| 5.1,Table 1 ( Dimension, axb) |
- |
|
|
|
| 5.1,Table 1 (t) |
- |
|
|
|
| 5.1,Table 1 (r) |
- |
|
|
|
| 5.2,Table 2 (l) |
- |
|
|
|
| 6.1 (Free from Defects) |
- |
|
|
|
| 6.2 (Finish of Handle) |
- |
|
|
|
| 6.3 (Alignment ) |
- |
|
|
|
| 7 (Finish) |
- |
|
|
|
| 8.2 (Stricking Test) |
- |
|
|
|
|
- |
-
Except Torque |
| 13105 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 3976 (2018) |
Safety Rubber Canvas Boots for Miners †Specification ( Sixth Revision ) |
For all types |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl.5.2.5 Compact Sole Heel
Cl.5.2.5.1 IS 3400 (Part 2) (requirements prescribed in col 3 of Table 2 when tested
as per corresponding test methods prescribed in col 4
of Table 2.
i)i) Hardness (IRHD) |
- |
|
|
|
| Cl.5.2.3 Coated Binding Material
IS 1954 (
Coated binding materials shall conform to the
requirements given in col 3 of Table 1 when tested
according to the methods prescribed in col 4 of Table 1.
i)Width in mm,
) |
- |
|
|
|
| Cl.5.2.3 Coated Binding Material
Annex C (ii) Breaking load in N, Min (50 cm grip length test specimen) ) |
- |
|
|
|
| CL.5.2.10 Counter Stiffener (
A counter stiffener, made out of textile reinforced withpolymer/rubber including (thermoplastic) having
thickness not less than 1.5 mm is to be stitched at inside
of upper so as to fortify the back of the footwear at
joints of quarter.) |
- |
|
|
|
| Cl.5.2.1 Upper
Cl.5.2.1.1
IS 3400(Part 5) ( Composite upper material shall comply with consolidation test as per 5.10.(IS 3400 (Part 5). There shall be no separation at a load
of 1.5 kg.)) |
- |
|
|
|
| Cl.5.2.5 Compact Sole Heel
Cl. 5.2.5.1
(The compact sole heel shall be made out
of polymeric/rubber components and the typical design
recommendation (not mandatory) of compact sole heel
is as shown in Fig. 3. Sectional view of Type 1/Type 2
)
toe position is given in Fig. 4.) |
- |
|
|
|
| Cl.5.2.3 Coated Binding Material
IS 1954 (
Coated binding materials shall conform to the
requirements given in col 3 of Table 1 when tested
according to the methods prescribed in col 4 of Table 1.
i)Width in mm,
) |
- |
|
|
|
| Cl.5.2.1.3 ,
Cl.6.5 of IS 15298 (Part 1). ( Composite upper material shall develop no cracks before 150 000 cycles when tested in accordance
with 6.5 of IS 15298 (Part 1).) |
- |
|
|
|
| Cl.5.2.5 Compact Sole Heel
Cl. 5.2.5.1
(The compact sole heel shall be made out
of polymeric/rubber components and the typical design
recommendation (not mandatory) of compact sole heel
is as shown in Fig. 3. Sectional view of Type 1/Type 2
)
toe position is given in Fig. 4.) |
- |
|
|
|
| Cl.5.2.5 Compact Sole Heel
5.2.5.1 IS 3400 (Part 4) (ii)*Change in hardness after
accelerated ageing at 100 ± 2
°C for 24 h
) |
- |
|
|
|
| Cl.5.2.5.3 Ageing for whole footwear (When rubber is used for manufacturing boots or when
the outer sole heel is made of bi-polymer, the finished
boots shall be aged at 100 ± 2°C for 24 h. On completion of test, all rubber components shall not
develop any sign of tackiness or brittleness.) |
- |
|
|
|
| Cl.5.2.9 Eyelets (
Aluminum eyelets of external collar diameter not less
than 10 mm and wall thickness of 0.30 to 0.35 mm
shall be used.) |
- |
|
|
|
| Cl.5.2.2.1 Abrasion resistance of compact insole/insocks/
counter stiffener (
When textiles used as lining for all the above are tested
in accordance with 6.12 of IS 15298 (Part 1), the lining
shall not develop any holes before the following number
of cycles has been performed:) |
- |
|
|
|
| Cl.5.5 Mass (The mass of one pair of finished footwear of size 8
shall not exceed 1 500 g for Type 1 and 1 400 g for
Type 2 with an increase or decrease of 100 g for each
bigger or smaller size, respectively.) |
- |
|
|
|
| Cl.5.10 Consolidation Test (
Representative sample of width 25 ± 0.5 mm are cut
out from the quarter of the upper along the length of
boot. The plies are separated by breaking the bond.
Carry out the test on two specimens in accordance with
IS 3400 (Part 5). Th) |
- |
|
|
|
| Cl.5.2.2.1 Abrasion resistance of compact insole/insocks/
counter stiffener (
When textiles used as lining for all the above are tested
in accordance with 6.12 of IS 15298 (Part 1), the lining
shall not develop any holes before the following number
of cycles has been performed:) |
- |
|
|
|
| Cl.5.6 ( Height of Upper
Height of upper of the boots shall conform to column 5
(Design C) and column 4 (Design B) of 5.2.2, Table 4
of IS 15298 (Part 2) for Type 1 and Type 2, respectively
when measured as per 6.2 of IS 15298 (Part 1) on the
inside of the back of the footwear and from seat of the
insole to top edge of the upper.) |
- |
|
|
|
| Cl.5.2.1 Upper
Cl.5.2.1.1
IS 3400(Part 5) ( Composite upper material shall comply with consolidation test as per 5.10.(IS 3400 (Part 5). There shall be no separation at a load
of 1.5 kg.)) |
- |
|
|
|
| Cl.6.2 Flexing Resistance of Compact Outsole (
When outsole is tested in accordance with 8.4 of
IS 15298 (Part 1), the cut growth shall not be greater
than 4 mm before 30 000 cycles.) |
- |
|
|
|
| 7.2 (Resistance to electricity) |
- |
|
|
|
| Cl. 8 (IS 17011, Table-1 (i)) (Allergenic and carcinogenic disperse dyes) |
- |
|
|
|
|
- |
-
Chem- Complete Material declaration required for Innocuousness test.
Mech- Complete,
Mech Quantity:- 5 Pair + Raw material + Type to be delared + Binding material, Thread, Toecap and eyelet to be provided seperately+ Slab of outsole for tear strength |
| 13106 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 513 : Part 2 (2016) |
Cold reduced carbon steel sheet and strip: Part 2 high tensile and multi - Phase steel (Sixth Revision) |
For all grades except the tests mentioned in remarks |
Please see remarks View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.0 (CARBON) |
- |
|
|
|
| 6.0 (SULPHUR) |
- |
|
|
|
| 6.0 (PHOSPHORUS) |
- |
|
|
|
| 6.0 (MANGANESE) |
- |
|
|
|
| 6.0 (SILICON) |
- |
|
|
|
| 6.0 (NITROGEN) |
- |
|
|
|
| Cl 7 (UTM) |
- |
|
|
|
| Cl 9 (Workmanship) |
- |
|
|
|
| Cl 10 (Length, Width & Thickness) |
- |
|
|
|
| 6.0 (ALUMINIUM) |
- |
|
|
|
| 8.2 (Erichson cupping test - IS 10175 for CR2, CR3, CR4 Grades from 0.5 - 2.0 mm Thickness) |
- |
|
|
|
| 8.3 (Rockwell Hardness test -HRB - IS:1586) |
- |
|
|
|
| 8.0 (Surface Roughness) |
- |
|
|
|
| Cl. 10 (Thickness (08)) |
- |
|
|
|
| Cl. 10 (Width (04)) |
- |
|
|
|
| 7.0 & table 3 (Boron as B) |
- |
|
|
|
| 7.0 & table 3 (Chromium as Cr) |
- |
|
|
|
| 7.0 & table 3 (Nickel as Ni) |
- |
|
|
|
| 7.0 & table 3 (Molybdenum as Mp) |
- |
|
|
|
| 7.0 & table 3 (Niobium as Nb) |
- |
|
|
|
| 7.0 & table 3 (Vanadium as V) |
- |
|
|
|
| 7.0 & table 3 (Titanium as Ti) |
- |
|
|
|
| 7.0 & table 3 (Calcium as Ca) |
- |
|
|
|
|
- |
-
Mech: Except Tensile Strain Hardening Component – n-Value |
| 13107 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 513 : Part 1 (2016) |
Cold reduced carbon steel sheet and strip: Part 1 cold forming and drawing purpose (Sixth Revision) |
Excluding Scope restricted "for ISC- 510LA, 550LA, 600LA, 700LA, 860LA, ISC-W, ISC-Y, ISC-YH, ISC-YC, ISC-C, ISC-M and ISC- HF" |
Rs.8850/- Excluding Tensile Strain Hardening component View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7.0 (CARBON) |
- |
|
|
|
| 7.0 (SULPHUR) |
- |
|
|
|
| 7.0 (PHOSPHORUS) |
- |
|
|
|
| 7.0 (MANGANESE) |
- |
|
|
|
| 7.0 (SILICON) |
- |
|
|
|
| 7.0 (NITROGEN) |
- |
|
|
|
| Cl. 8.1 & Table
5A, 5B & 5C (Yield Stress) |
- |
|
|
|
| Cl. 8.1 & Table
5A, 5B & 5C (Elongation at 50 mm gauge length) |
- |
|
|
|
| Cl. 8.1 & Table
5A, 5B & 5C (Elongation at 80 mm gauge length) |
- |
|
|
|
| Cl. 8.2 (Cupping Test(Only for sheet and coils CR2, CR3, CR4(having thickness 0.5 mm-2.0 mm)) |
- |
|
|
|
| Cl. 8.3 Table 6 (Hardness Test
( Only for CR0 & CR1)) |
- |
|
|
|
| Cl. 8.4 (Bend Test) |
- |
|
|
|
| Cl. 11 (Thickness) |
- |
|
|
|
| Cl. 11 (Width) |
- |
|
|
|
| Cl 10 (Workmanship) |
- |
|
|
|
| Cl 11 (Thickness (08)) |
- |
|
|
|
| CL 11.0 (Width (04)) |
- |
|
|
|
| 7.0 (ALUMINIUM) |
- |
|
|
|
| 7.0 (MICRO ALLOYS) |
- |
|
|
|
| Cl 7.1 table 3 (Chromium) |
- |
|
|
|
| Cl 7.1 table 3 (Nickel) |
- |
|
|
|
| Cl 7.1 table 3 (Calcium) |
- |
|
|
|
| Cl 7.1 table 3 (Niobium) |
- |
|
|
|
| Cl 7.1 table 3 (Vanadium) |
- |
|
|
|
| Cl 7.1 table 3 (Titanium) |
- |
|
|
|
| Cl 7.1 table 3 (Boron) |
- |
|
|
|
| Cl 7.1 table 3 (Molybdenum) |
- |
|
|
|
|
- |
-
Mech- Except Cl 8.5, 8.6,8.7, 9.5 & table 8 (Plastic Strain Ratio,TS Hardening Comp, Bk Hrdn. |
| 13108 |
BIS, Central Laboratory (CL)
| None
| IS 12234 (1988) |
plastic equilibrium float valve for cold water services |
- |
- View breakup
Horizontal inlet shank type :Rs. 6300.00, b) Vertical inlet shank type :Rs. 6300.00
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4/4.2 (MATERIAL) |
- |
|
|
|
| 6/6.2 (CONSTRUCTION) |
- |
|
|
|
| 6/6.2 (CONSTRUCTION) |
- |
|
|
|
| 6/6.8 (CONSTRUCTION) |
- |
|
|
|
| 6/6.2 (CONSTRUCTION) |
- |
|
|
|
| 6/6.2 (CONSTRUCTION) |
- |
|
|
|
| 6/6.2 (CONSTRUCTION) |
- |
|
|
|
| 6/6.2 (CONSTRUCTION) |
- |
|
|
|
| 6/6.2 (CONSTRUCTION) |
- |
|
|
|
| 6/6.2 (CONSTRUCTION) |
- |
|
|
|
| 6/6.2 (CONSTRUCTION) |
- |
|
|
|
| 6/6.2 (CONSTRUCTION) |
- |
|
|
|
| 6/6.2 (CONSTRUCTION) |
- |
|
|
|
| 6/6.2 (CONSTRUCTION) |
- |
|
|
|
| 6/6.2 (CONSTRUCTION) |
- |
|
|
|
| 6/6.7 (CONSTRUCTION) |
- |
|
|
|
| 6/6.2 (CONSTRUCTION) |
- |
|
|
|
| 6/6.7 (CONSTRUCTION) |
- |
|
|
|
| 6/6.2 (CONSTRUCTION) |
- |
|
|
|
| 6/6.2 (CONSTRUCTION) |
- |
|
|
|
| 6/6.6 (CONSTRUCTION) |
- |
|
|
|
| 6/6.7 (CONSTRUCTION) |
- |
|
|
|
| 6/6.1/6.4-Fig. 2A (CONSTRUCTION-Horizontal Inlet Shank type-Dimensions- 5 mm Max) |
- |
|
|
|
| 6/6.1/6.4-Fig. 2A (CONSTRUCTION-Horizontal Inlet Shank type-Dimensions- 6.5 to 8 mm) |
- |
|
|
|
| 6/6.1/6.4-Fig. 2A (CONSTRUCTION-Horizontal Inlet Shank type-Dimensions- 14.70 to 15.00 mm) |
- |
|
|
|
| 6/6.1/6.4-Fig. 2B (CONSTRUCTION-Vertical Inlet Shank type-Dimensions- minimum bore 9 mm ) |
- |
|
|
|
| 6/6.7 (CONSTRUCTION) |
- |
|
|
|
| 6/6.2 (CONSTRUCTION) |
- |
|
|
|
| 6/6.2 (CONSTRUCTION) |
- |
|
|
|
|
- |
-
- |
| 13109 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 17216 (2019) |
Polyethylene Mulch Films for Agriculture and Horticulture • Specification |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1.1 (Density) |
- |
|
|
|
| 5.1.2 (Melt Flow Index) |
- |
|
|
|
| 5.2.1 (Visual Appearance) |
- |
|
|
|
| 5.2.2 (Film Form) |
- |
|
|
|
| 5.2.4 (Odour) |
- |
|
|
|
| 5.3.1.1 (Tolerance on thickness) |
- |
|
|
|
| 5.3.1.2 (Tolerance on width) |
- |
|
|
|
| 5.3.2, Table 1 (Nominal Film Thickness) |
- |
|
|
|
| 5.3.1.2 (Tolerance on width) |
- |
|
|
|
| 5.3.2, Table 1 (Nominal Film Thickness) |
- |
|
|
|
| 5.3.3 (Tensile Strength at Break) |
- |
|
|
|
| 5.3.4 (Elongation at Break) |
- |
|
|
|
| 5.3.5 (Coefficient of Friction) |
- |
|
|
|
|
- |
-
Except Impact strength |
| 13110 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS/ISO 15761 (2002) |
Steel gate, globe and check valves for sizes DN 100 and smaller, for petroleum and natural gas industries |
- |
Rs.4990 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.2.2 (Flow Passage way) |
- |
|
|
|
| 5.3.1 (Wall Thickness) |
- |
|
|
|
| 5.3.2 (Wall Thickness) |
- |
|
|
|
| 5.3.3 (Wall Thickness) |
- |
|
|
|
| 5.4.2.1, Table4 (Socket Welding Ends, Diameter) |
- |
|
|
|
| 5.4.2.1, Table4 (Socket Welding Ends, Depth) |
- |
|
|
|
| 5.4.2.2, Table5 (Socket wall thickness) |
- |
|
|
|
| 5.4.2.3 (End to end dimension) |
- |
|
|
|
| 5.4.4.1 (Flange ends) |
- |
|
|
|
| 5.4.4.2 (Flange ends) |
- |
|
|
|
| 5.4.4.3,TABLE 6 (Flange ends) |
- |
|
|
|
| 5.4.5.1,Fig 1,Table 7 (Butt Welding Ends ,A) |
- |
|
|
|
| 5.4.5.1,Fig 1,Table 7 (Butt Welding Ends ,B) |
- |
|
|
|
| 5.4.5.1,Fig 1,Table 7 (Butt Welding Ends ,T) |
- |
|
|
|
| 5.4.5.2 (End to end dimension) |
- |
|
|
|
| 5.4.6.1 (Body Seat) |
- |
|
|
|
| 5.4.6.2 (Body Seat) |
- |
|
|
|
| 5.4.6.3 (Body Seat inside dia.) |
- |
|
|
|
| 5.7.1 (Stem) |
- |
|
|
|
| 5.7.2 (Stem) |
- |
|
|
|
| 5.8.1 (Stem nut or stem bushing) |
- |
|
|
|
| 5.9.1,Table 10 (Uncompressed packing height , hp) |
- |
|
|
|
| 5.9.2 (Surface Finish) |
- |
|
|
|
| 5.9.3 (Gland) |
- |
|
|
|
| 5.9.4 (Packing) |
- |
|
|
|
| 5.10.1 (Packing Retension) |
- |
|
|
|
| 5.10.2 (Packing Retension) |
- |
|
|
|
| 5.10.3 (Packing Retension) |
- |
|
|
|
| 5.10.4 (Packing Retension) |
- |
|
|
|
| 5.11.1 (Hand Wheel) |
- |
|
|
|
| 5.11.2 (Hand Wheel) |
- |
|
|
|
| 5.11.3 (Hand Wheel) |
- |
|
|
|
|
- |
-
Except 8.1 Pressure tests, 8.1.6 Fugitive emission testing (type test) |
