BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15123 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

13051

BIS, Eastern Regional Laboratory (ERL)

None

IS 617 (1994)

Cast aluminium and its alloys - Ingots and castings for general engineering purposes - Specification (Third Revision)

For all grade

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6, Table 2. (MECHANICAL PROPERTIES OF CASTINGS)	-
6.2 (Hardness)	-
9 (TOLERANCES ON DIMENSIONS OF CASTINGS)	-
5, Table 1. (Chemical Composition)	-
Table-1, Clause - 5.1 (Copper)	-
Table-1, Clause - 5.1 (Iron)	-
Table-1, Clause - 5.1 (Magnesium)	-
Table-1, Clause - 5.1 (Manganese)	-
Table-1, Clause - 5.1 (Silicon)	-
Table-1, Clause - 5.1 (Nickel)	-
Table-1, Clause - 5.1 (Zinc)	-
Table-1, Clause - 5.1 (Titanium)	-
Table-1, Clause - 5.1 (Lead)	-
Cl. 5 (Chromium)	-

-
Except Cl.5.1 Al, Sn, Pressure test Prepared piece for tensile test and hardness test required.

13052

BIS, Eastern Regional Laboratory (ERL)

None

IS 5312 : Part 1 (2004)

Swing Check Type Reflux (Non-Return] Valves for Water Works Purposes - Part 1 : Single-Door Pattern

Size upto 250 mm

Rs 5700/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.2 (Manufacture Dimensions Table 2 )	-
4 (Nominal Sizes)	-
6.5 (Manufacture )	-
6.4 (Manufacture )	-
6.6 (Manufacture )	-
6.7 (Manufacture )	-
6.8 (Manufacture )	-
6.9 (Manufacture )	-
6.10 (Manufacture )	-

-
Except Al , Sb, Tin,Other Elements, (cl8.2 ) hydrostatic body test, (cl 8.3) hydrostatic seat test

13053

BIS, Eastern Regional Laboratory (ERL)

None

IS 1879 (2010)

Malleable cast iron pipe fittings - Specification (Third Revision)

Rs.7800.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1.1 (Type of Fittings - IS 1879)	-
5.1.2 (Size designation - IS 1879)	-
5.1.2.1 (Equal fitting - IS 1879)	-
5.1.2.2 (Unequal fitting -IS 1879)	-
5.1.3 (Right and Left hand thread - IS 1879)	-
5.1.1 (Code Number -IS 1879)	-
6.1 (Tensile Strength - IS 14329)	-
6.1 (Elongation - Is 14329)	-
7.2- Table 2 (Wall thickness of fittings - IS 1879)	-
7.5 - Table 2 (Projection of Rainforcement - IS 1879)	-
7.5 - Table 3 (Width of Rainforcement - IS 1879)	-
7.1 - Table 4 to Table 27 (a - IS 1879)	-
7.1 - Table 4 to Table 27 (b - IS 1879)	-
7.1 - Table 4 to Table 27 (c- IS 1879)	-
7.1 - Table 4 to Table 27 (d- IS 1879)	-
7.1 - Table 28 (d -IS 1879)	-
7.1 - Table 28 (D - IS 1879)	-
9 (Freedom from defects )	-
10.i) (Mass of Galvanized coating)	-
10.ii) (Uniformity of Galvanized coating-IS 2633)	-
10.iii) (Adhesion of Galvanized coating IS 2629)	-
10.iv) (Freedom from defects IS 4759)	-

-
Except Chemical composition as per mutual agreement between purchaser and manufacturer, Cl 7 Threads, Cl 11 Pressure Test, 12 Compression test. Sample req- 3 nos. fittings, Black fittings for compression test, Tensile Test bars, 3 nos. fittings for galvanizing tests

13054

BIS, Central Laboratory (CL)

None

IS 6956 (2001)

Cover paper - Specification (First Revision)

4650 View breakup
"1. for cover paper which are white in colour : 16x300 = Rs.4800.00, 2. for cover paper which are not white in colour : 15x300 = Rs.4500.00 3. test charges for special requirements (for ECO mark) : 6x300 = Rs.1800.00"

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (REQUIREMENTS-General)	-
4.3 (Grarnmage-As per 6 of IS 1060 (Part 1)-Further a mean of 10 test results shall not vary from nominal grarnmage by more than ±4 percent.)	-
4.3 (Grarnmage-As per 6 of IS 1060 (Part 1)- no single test result shall vary by more than *6 percent from nominal)	-
4.2,Table1 (One minute Cobb test (Test method Column 4 and 5 of table1))	-
4.2,Table1 (Smoothness (Bendtsen)-(Test method Column 4 and 5 of table1))	-
4.2,Table1 (Burst Index-(Test method Column 4 and 5 of table1))	-
4.2,Table1 (Ph(Test method Column 4 and 5 of table1))	-
4.2,Table1 (Folding endurance-MD-(Test method Column 4 and 5 of table1))	-
4.2,Table1 (Wax pick-(Test method Column 4 and 5 of table1))	-
4.2,Table1 (Folding endurance-CD-(Test method Column 4 and 5 of table1))	-
4.2,Table1 (Brightness(For white paper only) -(Test method Column 4 and 5 of table1))	-
4.2,Table1 (Opacity, (Test method Column 4 and 5 of table1))	-
4.2,Table1 (Bending stiffness index,-CD-(Test method Column 4 and 5 of table1))	-
4.2,Table1 (Bending stiffness index,-MD-(Test method Column 4 and 5 of table1))	-

-
Test facility is not available for mentioned exclusiosn parameters; EXCLUDING Brightness, Bending stiffness;

13055

BIS, Central Laboratory (CL)

None

IS 2566 (1993)

Textiles – B-twill jute bags for packing foodgrains – Specification (third revision)

4800 View breakup
Rs 4800/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.5.2 & Table 2. IS 2969 ( The bales containing the bags shall conform to the requirements as laid down in Table 2. vi) Oil content on dry deoiled material basis, percent, Max)	-

-
-

13056

Softlines and Electrical Safety Testing Laboratory TUV Rheinland India Pvt Ltd., Gurgaon (8167106)

8167106

IS 9873 : Part 9 (2017)

Safety of Toys Part 9 Certain Phthalates Esters in Toys and Children's Products

6000 View breakup
Rs.6000/- (10% discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	6000		-
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	6000		-

19 Jan, 2027

-
-

13057

Softlines and Electrical Safety Testing Laboratory TUV Rheinland India Pvt Ltd., Gurgaon (8167106)

8167106

IS 9873 : Part 3 (2020)

Safety of Toys Part 3 Migration of Certain Elements ( Third Revision )

4500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1 - Table 1(Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	950	-
4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	950	-
4.1 - Table 1(Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	950	-
4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	950	-
4.1 - Table 1(Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	950	-
4.1 - Table 1(Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	950	-
4.1 - Table 1(Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	950	-
4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	950	-

19 Jan, 2027

-
-

13058

BIS, Central Laboratory (CL)

None

IS 5604 (1984)

Specification for hand - Operated universal gearless pulling and lifting machines (First Revision)

- View breakup
Testing charges = 10.5 x 300 + 2 x 9 = Rs. 3168.00 + testing charges as per referred ISS (excluding Back slippage) (only Visual tests as per Cl. 5).

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (Capacity)	-
5.3 (Construction and Workmanship Casing)	-
5.4 (Construction and Workmanship Bearings)	-
5.4.1 (Ball and Roller Bearings)	-
5.4.2 (Plain Bearings)	-
5.5 (Wire Ropes)	-
5.6 (Heat Treatment)	-
5.7 (Construction and Workmanship Bearings)	-
5.8 (Weight)	-
7.1 (Operation)	-
7.2 (Operation)	-
7.3 (Operation)	-
7.4 (Operation Back Slippage)	-
8 (Effort)	-
9.1 (Proof Loading)	-
9.2 (Operational Test)	-
9.3 (Break Load Testing )	-
9.4 (Examination)	-
11.1 (Marking)	-
Clause -3, 3.1 (Steel bars, Plates and sections)	-
Clause -3, 3.1 (Steel Forgings)	-
Clause -3, 3.1 (Aluminium Alloy)	-
Clause -3, 3.1 (Coil Springs)	-
Clause -3, 3.1 (Hooks)	-
Clause -3, 3.1 (Wire Ropes)	-

-
EXCLUDING -; i] cl 7.4 back slippage, ii] cl 9.2 operational test

13059

BIS, Central Laboratory (CL)

None

IS 1943 (1995)

Textiles – A-twill jute bags (second revision)

Rs4100/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1,5.1,Table 1 (Moisture Regain, Percent-IS 9113)	-
4.1,5.1,Table 1 (Oil content, Percent-IS 2969)	-

-
-

13060

BIS, Central Laboratory (CL)

None

IS 3992 (1982)

Specification for trays, kidney (First Revision)

Rs.1275/- and material testing charges as per relevant View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1&3.2 (C - IS 228)	-
3.1&3.2 (S - IS 228)	-
3.1&3.2 (P - IS 228)	-
3.1&3.2 (Mn - IS 228)	-
3.1&3.2 (Si - IS 228)	-
3.1&3.2 (Cr - IS 228)	-
3.1&3.2 (Ni - IS 228)	-
4.1 (Shape)	-
4.2, Table-1,1 (Length -A - IS 3992)	-
4.2, Table-1,2 (Width -B - IS 3992)	-
4.2, Table-1,3 (Height -C - IS 3992)	-
4.2, Table-1,7 (Minimum Thickness of material)	-
5.0 &5.1 (Workmanship and finish of stainless steel Trays)	-
5.0 & 5.2 (Workmanship and finish of Enamelled Iron Trays)	-

-
-

13061

BIS, Central Laboratory (CL)

None

IS 2932 (2013)

Enamel, synthetic, exterior: (a) Undercoating (b) Finishing - Specification (Fourth Revision)

- View breakup
For Undercoat including Keeping Properties = Rs. (7800+2050+600) = Rs. 10,450 For Finishing including Keeping Properties = Rs. (8475+2050+750) = Rs. 11275 Keeping Properties Only, For Undercoat = Rs. 375/- Keeping Properties Only, For Finishing = Rs. 375/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.3 (Freedom from Coarse Particles)	-
6.4 (Skin Formation)	-
6.5 (Thinning Properties)	-
6.6 (Application Properties)	-
6.8 (Lead Restriction)	-
6.9 Table 2 (1) a. Consistency ( Undercoating and Finishing ) )	-
6.9 Table 2 (1) b. Viscosity by ford 80-120 s )	-
6.9 Table 2 ( 2) Mass, ( Under coating ) )	-
6.9 Table 2 ( 2) Mass, (Finishing ) )	-
6.9 Table 2 (3) Drying time, a) Surface dry, ( Under coating ) )	-
6.9 Table 2 (3) Drying time, a) Surface dry, ( Finishing ) )	-
6.9 Table 2 (b) Hard dry ( Under coating ) )	-
6.9 Table 2 (b) Hard dry, (Finishing ) )	-
6.9 Table 2 (c) Tack free ( Under coating (Finishing ) )	-
6.9 Table 2 (4) a) Finish (Under coating ) )	-
6.9 Table 2 (4) a) Finish (Finishing) )	-
6.9 Table 2 (b) ) Gloss 60º (Under coating ) )	-
6.9 Table 2 (b) ) Gloss 60º (Finishing) )	-
6.9 Table 2 (5) Fineness of grind,(Under coating ))	-
6.9 Table 2 (4) a) Finish (Finishing) )	-
6.9 Table 2 (6) Colour , (Finishing))	-
6.9 Table 2 (7) Flexibility and adhesion: a) Scratch hardness No such scratch as to show the bare metal after Clause 3 of — (Load 1 000 g) ( Under coating & Finishing ) )	-
6.9 Table 2 (b) Bend test (with 6.25 mm 48 h of air in type 1 apparatus) ( Under coating & Finishing ) )	-
6.9 Table 2 (8) Flash point ( Under coating & Finishing ) )	-
6.9 Table 2 (9) Composition:b) Phthalic anhydride content of non-volatile vehicle ( Under coating & Finishing ))	-
6.9 Table 2 (11) Resistance to alkali ( Under coating & Finishing ))	-
6.9 Table 2 (12) Accelerated storage stability test ( Under coating & Finishing ))	-
6.9 Table 2 (13) Keeping properties ( Under coating & Finishing ))	-
6.9 Table 2 (14) Wet opacity ( Under coating & Finishing ))	-

-
Weatherometer for durability, approved sample for resistance to acid and alkali, test facility for volume solids test is required; EXCLUDING Durability, Volume solids, Resistance to acid and alkali;

13062

BIS, Central Laboratory (CL)

None

IS 10350 (2020)

Powder Hair Dyes — Specification ( Third Revision )

3,840 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.6 Table 2 () Calculated active matter (as PPD) in the solution after recommended dilution with water/diluent, type 1)	-
4.5 Table 1 (Arsenic (as As2 O3 ), for all types)	-
4.6 Table 2 () Calculated active matter (as PPD) in the solution after recommended dilution with water/diluent, type 1)	-
4.6 Table 2 () Calculated active matter (as PPD) in the solution after recommended dilution with water/diluent, type 1)	-
4.5 Table 2 (pH, Type 3)	-
4.5 Table 1 (pH, type 1 and 2)	-
4.5 Table 1 (Active matter as PPD content, Type 1)	-
4.1 (description)	-
4.6 Table 2 () Calculated active matter (as PPD) in the solution after recommended dilution with water/diluent, type 1)	-
4.5 Table 1 (Arsenic (as As2 O3 ), for all types)	-
4.6 Table 2 () Calculated active matter (as PPD) in the solution after recommended dilution with water/diluent, type 1)	-
4.5 Table 1 (pH, type 1 and 2)	-
4.5 Table 1 (Heavy metals (as Pb), for all types)	-
4.5 Table 1 (Active matter as PPD content, Type 1)	-
4.1 (description)	-
4.5 Table 1 (Dye ingredients, type 3 only)	-

-
-

13063

Delhi Analytical Research Laboratory

8169106

IS 13488 (2008)

Irrigation equipment - Emitting pipe systems - Specification (First Revision)

12 to 25 mm

12400 View breakup
Rs.12400/-(10% discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.2.2(Fittings)	-	500	10% discount to BIS
8.1.3(Uniformity of Emission Rate for Regulated Emitting Pipes)	-	800	10% discount to BIS
8.1.2(Uniformity of Emission Rate for Unregulated Emitting Pipes)	-	800	10% discount to BIS
8.2.2(Regulated Emitting Pipes)	-	800	10% discount to BIS
8.3.1(Wall Thickness ofEmitting Pipe)	-	200	10% discount to BIS
8.3.2(Inside Diameter ofEmitting Pipe)	-	300	10% discount to BIS
8.3.3(Flow Paths in Emitting Unit)	-	300	10% discount to BIS
8.3.4(Spacing ofEmitter Units)	-	200	10% discount to BIS
8.5(Resistance to Tension at Elevated Temperature)	-	1500	10% discount to BIS
8.6(Resistance to Pull Out of Joints Between Fitting and Emitting IS 13479)	-	1500	10% discount to BIS
8.7.1(Resistance of PE Emitting Pipe to Environmental Stress Cracking -Acceptance Test Annex D of IS 12786)	-	1500	10% discount to BIS
8.2(Emission Rate of Emitting Unit as a Function of Inlet Pressure)	-	1500	10% discount to BIS
8.4.1(Resistance to Hydrostatic Pressure at Ambient Temperature)	-	1500	10% discount to BIS
8.8(Determination of Emitting Unit Exponent)	-	1500	10% discount to BIS
5.1.2 (Ref. Cl 4.1.a of IS 12786 : 1989)(Potyethylene - higher olefins constituent )	-	700	10% discount to BIS
5.1.2 (Ref. Cl 4.1.b of IS 12786 : 1989)(Potyethylene - anti-oxidant)	-	1500	10% discount to BIS
5.1.2 (Ref. Cl 4.1.c.i of IS 12786 : 1989)(Density)	-	500	10% discount to BIS
5.1.2 (Ref. Cl 4.1.c.ii of IS 12786 : 1989)(Toluene extract - Annex A of IS 12786:1989)	-	700	10% discount to BIS
5.1.2 (Ref. Cl 4.1.c.iii of IS 12786 : 1989)(Volatile matter - Annex B of IS 12786:1989)	-	1000	10% discount to BIS
5.1.2 (Ref. Cl 4.1.c & 4.2.a of IS 12786 : 1989)(Carbon Black content - IS 2530 : 1963)	-	1000	10% discount to BIS
5.1.2 (Ref. Cl 4.2.b of IS 12786 : 1989)(The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	800	10% discount to BIS
8.4.2(Resistance to Hydrostatic Pressure at Elevated Temperature)	-	1500	10% discount to BIS
8.7.2(Resistance of PE Emitting Pipe to Environmental Stress Cracking - Type Test Annex D of IS 12786)	-	1500	10% discount to BIS

-
-

13064

Delhi Analytical Research Laboratory

8169106

IS 14333 (1996)

High Density Polyethylene Pipe For Sewerage -

Up to 355 mm

8700 View breakup
Rs.8700/-(10% discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Colour)	-	100	10% discount to BIS
6(Dimensions of pipes)	-	100	10% discount to BIS
7(Visual Appearance)	-	100	10% discount to BIS
8.1(Hydraulic characteristics)	-	3500	10% discount to BIS
8.2(Reversion)	-	1000	10% discount to BIS
8.3(Density)	-	500	10% discount to BIS
8.4(Melt Flow Rate)	-	1000	10% discount to BIS
Cl. 8.5, IS 2530-1963, Cl. 10(Cabon Black Content)	-	700	10% discount to BIS
Cl. 8.5, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	700	10% discount to BIS
3(Designation)	-	3300	10% discount to BIS and This charges Either for resin or for Resin with master batch applicable.

-
-

13065

Delhi Analytical Research Laboratory

8169106

IS 15778 (2007)

Chlorinated polyvinyl chloride (Cpvc) pipes for potable hot and cold water distribution supplies - Specification

Up to 150 mm

101600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.3.2 Annex C(Verification of the Malfunction Temperature, Tmal: )	-	25000	10% discount to BIS
6.3.2 IS 13360 (Part 3/See 1)(Density)	-	500	10% discount to BIS
7.1 IS 12235 (Part 1) Table 2(Dimension of Pipes: Mean outside Diameter)	-	200	10% discount to BIS
7.1,7.1.1 IS 12235 (Part 1) Table 2(Outside Diameter at any point)	-	200	10% discount to BIS
7.1.2 IS 12235 (Part 1) Table 2(Wall Thickness )	-	200	10% discount to BIS
7.1.3 (Effective length)	-	200	10% discount to BIS
8(Pipe Ends)	-	200	10% discount to BIS
9.1(Visual Appearance)	-	200	10% discount to BIS
9.2 IS 12235 (Part 3)(Opacity)	-	500	10% discount to BIS
Cl. 9.3,IS 4985 Cl. 10.3(Lead (first extraction))	-	500	10% discount to BIS
Cl. 9.3,IS 4985 Cl. 10.3(Lead (third extraction))	-	500	10% discount to BIS
Cl. 9.3,IS 4985 Cl. 10.3(Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	500	10% discount to BIS
Cl. 9.3,IS 4985 Cl. 10.3(Cadmium (for all three extracts) )	-	1000	10% discount to BIS
Cl. 9.3,IS 4985 Cl. 10.3(Mercury (for all three extracts) )	-	1000	10% discount to BIS
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction) )	-	500	10% discount to BIS
9.4 IS 12235(Part 5/Sec 1 and Sec 2)(Reversion Test : When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.)	-	800	10% discount to BIS
9.5 IS 12235(Part 2)(Vicat Softening Temperature: When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen shall not be less than 110°C.)	-	800	10% discount to BIS
9.6 IS 12235(Part 14)(Density)	-	500	10% discount to BIS
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	27100	10% discount to BIS
10.3 IS 4985 Table 4(Resistance to External Blow at O°C: When tested by the method prescribed in IS 4985, with classified striker mass and drop height as given in Table 4, the pipe shall have a true impact rate of not more than 10 percent.)	-	1200	10% discount to BIS
10.5 IS 12235(Part 13)(Tensile Strength : When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C. )	-	1000	10% discount to BIS
7.1.3 (Effective length)	-	0	10% discount to BIS
6.2.1 Annex B(Chloride Content of Resin)	-	1000	10% discount to BIS
6.3(Compound Properties)	-	10000	10% discount to BIS
6.3.1 Annex B(Chloride content)	-	1000	10% discount to BIS
9.1(Visual Appearance)	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances including di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate')	-	0	-
9.4 IS 12235(Part 5/Sec 1 and Sec 2)(Reversion Test : When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.)	-	0	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	1500	10% discount to BIS
10.2 Table 3 IS 12235 (Part 8/Sec 1)(Thermal Stability by Hydrostatic Pressure Testing)	-	35000	10% discount to BIS
10.4 IS 12235(Part 19)(Flattening Test)	-	2000	10% discount to BIS

-
-

13066

Delhi Analytical Research Laboratory

8169106

IS 12818 (2010)

Unplasticized polyvinyl chloride (Pvc - U) screen and casing pipes for bore/tubewells - Specification (Second Revision)

UP TO 400 MM

16200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(COLOUR)	-	100	10% discount to BIS
9.1( Visual Appearance)	-	100	10% discount to BIS
8.1 to 8.3 and Table 11 &12 Fig 3A & 4A(THREADING OF SCREEN ANDCASING PIPES. IS 554.)	-	100	10% discount to BIS
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	200	10% discount to BIS
7.4 Table 8 & 9 Fig 1(Segmental length for Spigot (average of 4.0))	-	100	10% discount to BIS
7.5 and Table 10 Fig 2A & 2B(Minimum number of slots on the circumference of the cross-section.)	-	200	10% discount to BIS
7.4 Table 8 & 9 Fig 1(Effective length, l2)	-	100	10% discount to BIS
7.3.1(No.of Ribs)	-	100	10% discount to BIS
7.3.2(Rib height)	-	100	10% discount to BIS
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Max)	-	200	10% discount to BIS
7.2 and Table 5, 6 & 7 Fig 1B(DIMENSIONS - Casing Pipes)	-	200	10% discount to BIS
7.2 and Table 5, 6 & 7 Fig 1B(Nominal Diameter)	-	200	10% discount to BIS
9.4 and Table 14(Resistance to External Blows at 0 ?C IS 12235 (Part 9))	-	2000	10% discount to BIS
8.4(Sealing rings - Hardness)	-	500	10% discount to BIS
9.7(Effect on Water a) Lead (first extraction) b) Lead (Third extraction) c) Dialkyl Tin C4 & higher homologues measured as Tin (Third extraction) d) Cadmium (All three extracts) e) Mercury (All three extracts) f) Other Toxic Substances )	-	5000	10% discount to BIS
9.5(Tensile Strength IS 12235(Part 13))	-	1500	10% discount to BIS
9.3(Density IS 12235 (Part 14))	-	500	10% discount to BIS
9.2(Internal Diameter)	-	100	10% discount to BIS
9.6(Vicat Softening Temperature IS 12235 (Part 2).)	-	1500	10% discount to BIS
4.1.2 (Ref. Cl 11 of IS 4669)(Composition -Sulphated ash content )	-	1000	10% discount to BIS
7.5 and Table 10 Fig 2A & 2B(Approximate Free Passage Area, in Percent (Mean Value) for Width of Slot (w))	-	200	10% discount to BIS
4.1.1 (VCM Content as per IS 10151 (Annex A))	-	1000	10% discount to BIS
8.3.1 & 8.3.2 (Threading of casing pipe (from 100 to 200 DN Table – 11 & Fig. 3A) & (from 250 to 400 DN Table – 12 & Fig. 4A) Outside diameter d1(+0, -0.3) d2 d3 D1 (+0.3, -0) D2 D4 D5 (+0.3, -0) Z h3 (+0, -0.1) H4 (+0, -0.1) )	-	200	10% discount to BIS
4.1.2(K-Value as per IS-4669)	-	1000	10% discount to BIS

-
-

13067

Northern India Textile Research Association (NITRA), Ghaziabad

8163504

IS 16890 (2018)

Textiles - Protective clothing for firefighters - Specification

48950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.5.1 Table-2, Cl.D-2(Permissible No. of Defectives)	-	0.02		-
Cl.5.1 Table-2, Cl.D-2(Sample Size (No. of Protective Clothing))	-	2000		-

-
-

13068

Delhi Analytical Research Laboratory

8169106

IS 12786 (1989)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification

12-32 MM

12700 View breakup
Rs.12700/- (10% discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0 5.1 (Table1) (Dimensions a)Outside diameter of pipe)	-	200	10% discount to BIS
5 and Table 1(DIMENSIONS OF PIPES - wall thickness shall)	-	200	10% discount to BIS
6.1(Visual Appearance)	-	100	10% discount to BIS
7.3(Tensile Test)	-	1200	10% discount to BIS
7.3(Elongation at Break)	-	1200	10% discount to BIS
7.4(SusceptibiIity to Environmental Stress Cracking)	-	1800	10% discount to BIS
7.2(Reversion Test)	-	1000	10% discount to BIS
7.1(Hydraulic Characteristics)	-	4000	10% discount to BIS
4.1.c.iii (Volatile matter - Annex B )	-	1000	10% discount to BIS
5.0 5.1 (Table1) (Dimensions a)Outside diameter of pipe)	-	0	-
5 and Table 1(DIMENSIONS OF PIPES - wall thickness shall)	-	0	-
6.1(Visual Appearance)	-	0	-
7.3(Tensile Test)	-	0	-
7.3(Elongation at Break)	-	0	-
7.4(SusceptibiIity to Environmental Stress Cracking)	-	0	-
7.2(Reversion Test)	-	0	-
7.1(Hydraulic Characteristics)	-	0	-
4.1.c.iii (Volatile matter - Annex B )	-	0	-
4.1.a (Potyethylene - higher olefins constituent )	-	1000	10% discount to BIS
4.1.b(Potyethylene - anti-oxidant)	-	1500	10% discount to BIS
4.1.c & 4.2.a (Carbon Black content - IS 2530 : 1963)	-	700	10% discount to BIS
Cl. 4.2(Carbon Black Content)	-	700	10% discount to BIS
Cl. 4.2(Carbon Black Dispersion)	-	700	10% discount to BIS
4.1.c.i (Density)	-	500	10% discount to BIS
4.1.c.ii (Toluene extract - Annex A)	-	1000	10% discount to BIS
4.1.c.iii (Volatile matter - Annex B )	-	0	-
Cl. 5.0 & 5.1 Table -1(Outside Diameter)	-	0	-
5.0 5.1 (Table1) (c)Wall thickness of pipe Minimum)	-	0	-
5.0 5.1 (Table1) (c)Wall thickness of pipe Maximum)	-	0	-
7.1 Table-2 (b)Acceptance Test for 01 hour at 20°C & 6.9MPa induced stress)	-	1500	-
7.1 Table-2 (Hydraulic Characteristics a)Quality Test for 100 hours at 70°C & 2.5.MPa induced stress. )	-	2500	-
7.2(Reversion Test)	-	0	10% discount to BIS
7.3(Tensile Test)	-	0	-
7.3(Elongation at Break)	-	0	-
7.4(SusceptibiIity to Environmental Stress Cracking)	-	0	-
8.0 (8.1) (Supply of pipes )	-	100	10% discount to BIS
9.0 (9.1)(Coiling )	-	500	10% discount to BIS

-
-

13069

National Council for Cement and Building Materials (testing laboratories), Faridabad

9102335

IS 16415 (2015)

Composite cement - Specification

13725 View breakup
Rs.13725/- (excluding transverse strength), Rs.40240/- (including transverse strength)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 -Table - 2 i(Insoluble residue - Cl 4.10 of IS 4032:1985)	-	1940	-
6 -Table - 2 ii(Magnesia - Cl 4.8 of IS 4032:1985)	-	2510	-
6 -Table - 2 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	1940	-
6 -Table - 2 iv(Sulphide sulphur (S) - Cl 6.12 of IS 4032:1985)	-	1940	-
6 -Table - 2 v(Loss on ignition - Cl 4.2 of IS 4032:1985)	-	970	-
6 -Table - 2 vi(Chloride content - Cl 4.13 of IS 4032:1985)	-	1940	-
7 and Table 3 i(Fineness IS 4031(Part 2))	-	1610	-
7 and Table 3 ii a(Soundness, Le-Chate1ier expansion IS 4031(Part 3) )	-	1610	-
7 and Table 3 ii b(Soundness, Autoclave expansion IS 4031(Part 3) )	-	2900	-
7 and Table 3 iii a(Setting Time ( by Vicat Apparatus), Initial IS 4031(Part 5))	-	725	-
7 and Table 3 iii b(Setting Time ( by Vicat Apparatus ), Final IS 4031(Part 5))	-	725	-
7 and Table 3 iv a(Compretsive Strenqth .72 ± 1 hr IS 4031(Part 6))	-	1650	-
7 and Table 3 iv b(Compretsive Strenqth 168 ± 2 hr IS 4031(Part 6))	-	1870	-
7 and Table 3 iv c(Compretsive Strenqth 672 ± 4 hr IS 4031(Part 6))	-	2200	-
7 and Table 3 v(Drying shrinkage IS 4031(Part 10))	-	2330	-
7 and Table 3 vi(Transverse strength (optional) IS 4031(Part 8) )	-	11770	TESTING CHARGES for TS @ 3 DAYS is 3520/-, for 7 days is 3850/- & for 28 days is 4400/-.
Cl. 6.1,Table 2(Alkali content)	-	1610	-

15 May, 2027

-
-

13070

BIS, Central Laboratory (CL)

None

IS 4003 : Part 2 (1986)

Specification for pipe wrenches: Part 2 heavy duty (First Revision)

Rs. 3900/- and testing charges as per referred Iss View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 AND AS PER IS 1570 PART 2 (CARBON)	-
4 AND AS PER IS 1570 PART 2 (SULPHUR)	-
4 AND AS PER IS 1570 PART 2 (PHOSPHORUS)	-
4 AND AS PER IS 1570 PART 2 (MANGANESE)	-
4 AND AS PER IS 4454 PART 1 (CARBON)	-
4 AND AS PER IS 4454 PART 1 (SULPHUR)	-
4 AND AS PER IS 4454 PART 1 (PHOSPHORUS)	-
4 AND AS PER IS 4454 PART 1 (MANGANESE)	-
4 AND AS PER IS 4454 PART 1 (SILICON)	-
4 AND AS PER IS 4454 PART 1 (COPPER)	-
4 AND AS PER IS 4454 PART 1 (NITROGEN)	-
4 AND AS PER IS 4454 PART 1 (cu + cr + ni)	-
4 AND AS PER IS 4454 PART 1 (SULPHUR+ PHOSPHORUS)	-
4 AND AS PER IS 4454 PART 1 (MICRO ALLOY)	-
4 AND AS PER IS 2707 (CARBON)	-
4 AND AS PER IS 2707 (SULPHUR)	-
4 AND AS PER IS 2707 (PHOSPHORUS)	-
4 AND AS PER IS 2707 (MANGANESE)	-
4 AND AS PER IS 2707 (SILICON)	-
4 AND AS PER IS 2707 (MICRO ALLOY)	-
3 (Dimensions- Nominal Size)	-
3 (Dimensions-Capacity D min)	-
3 (Dimensions- Capacity D max)	-
3 (Dimensions- Jaw Thickness,T min)	-
3 (Dimensions- Length of movablejae, l1)	-
3 (Dimensions- Length of Handle, l2)	-
3 (Dimensions- Width of Nut, N)	-
5 (Hardness- Movable and heel Jaws)	-
5 (Hardness- Shank of movable Jaw)	-
5 (Hardness- Adjustable nut)	-
6.1 (Manufacture- Handel)	-
6.1 (Manufacture- Handel)	-
6.2 (Movable Jaw)	-
6.2 (Movable Jaw)	-
6.3 (Heel jaw)	-
6.3 (Heel jaw)	-
6.4 (Adjusting Nut)	-
6.4 (Adjusting Nut)	-
6.4 (Adjusting Nut)	-
6.5 (Springs)	-
6.5 (Springs)	-
7 (Workmanship & Finish)	-
7 (Workmanship & Finish)	-
8 (Operation)	-
11.1 (Static Load Test)	-
11.1 (Static Load Test)	-

-
Suitable grade of Material as per relevant IS may please be declared. Sample Size 5 pcs of 5x5 cm having dia> 3mm and thickness > 0.8 mm;

13071

MSME Testing Centre, New Delhi

8101204

IS 4923 (2017)

Hollow steel sections for structural use - Specification (Third Revision)

8574 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.7.1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	3795	Chemical Composition Test
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Thickness))	-	1117	Dimension and Weight
Cl. 10.7, Fig 5(Total twist, V)	-	1352	Straightness and Twist
Cl. 15.2, Table 3(Tensile Strength- IS 1608)	-	1790	Tensile, Yield Strength and Elongation Test

31 Dec, 2026

-
-

13072

MSME Testing Centre, New Delhi

8101204

IS 1161 (2014)

Steel tubes for structural purposes - Specification (Fifth Revision)

14934 View breakup
Rs.14934/- (10% concession for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause - 5.1, Table-3( CARBON)	-	4895	-
Cl 6(Outer Diameter, Thickness & Mass)	-	1676	-
Cl 7(Workmanship)	-	520	-
8 AND AS PER IS 4736(MASS OF ZINC COATING)	-	1386	Uniformity and Mass of Zinc coating
Cl 9(Workmanship)	-	1352	Straighness
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	1790	Tensile Test
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	1790	Cold Bend or Flattening Test

31 Dec, 2026

-
Upto 50NB only

13073

DELHI TEST HOUSE, Azadhpur

8131406

IS 9873 : Part 9 (2017)

Safety of Toys Part 9 Certain Phthalates Esters in Toys and Children's Products

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	3000		-
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	3000		-

17 Jun, 2027

-
Included w.e.f. 15-10-2020

13074

BIS, Central Laboratory (CL)

None

IS 4766 (1982)

Specification for thiram water dispersible powders (First Revision)

Rs 4200/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.3 Table 1 (Wettability)	-
2.1 (Description)	-
2.3 Table 1 (Suspensbility after accelarated storage)	-
2.3 Table 1 (Wettability)	-
2.1 (Description)	-
2.3 Table 1 (Suspensbility after accelarated storage)	-

-
-

13075

BIS, Central Laboratory (CL)

None

IS 9532 (1980)

Specification for chakka and shrikhand

Rs. 3300.00 (For CHAKKA) & Rs. 4200.00 (For SHRIKHAND) View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2.1 and 3.2.6 Table 2 ( Titratable acidity)	-
3.1.1 and 3.1.6 Table 1 ( Titratable acidity)	-
3.1.1 and 3.1.6 Table 1 (Total ash, Chakka )	-
3.1.1 and 3.1.6 Table 1 (Coliform count)	-
3.2.1 and 3.2.6 Table 2 (Coliform count)	-
3.1.1 and 3.1.6 Table 1 (Yeast and mould count)	-
3.2.1 and 3.2.6 Table 2 (Yeast and mould count)	-

-
500 gm x 3 -As per revised IS 9532 : 2023;

13076

BIS, Central Laboratory (CL)

None

IS 9360 (1980)

Specification for carbofuran granules, bncapsulated

7200/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.3.2 (Acidity)	-
2.2.3 (Dust)	-
2.2.4 (Encapsulation)	-
2.2.6 (Moisture Content)	-
2.3.1 (Carbofuran Content, NV upto 9)	-
2.2.2 (Particle Size)	-

-
-

13077

BIS, Central Laboratory (CL)

None

IS 14314 (1995)

Thtnner,general purpose,for synthetic paints and varnishes - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 5.1, Clause 4.2, Table 1 (Sr.No. viii) (Keeping Quality (Hydrocarbon content))	-
Clause 5.1, Clause 4.2, Table 1 (Sr.No. vii) (Keeping Quality (Residue on evaporation))	-
Clause 5.1, Clause 4.2, Table 1 (Sr.No. vi) (Keeping Quality (Flash point (Abel)))	-
Clause 5.1, Clause 4.2, Table 1 (Sr.No. v) (Keeping Quality (Distillation range))	-
Clause 5.1, Clause 4.2, Table 1 (Sr.No. iv) (Keeping Quality (Relative density at 27 °C))	-
Clause 5.1, Clause 4.2, Table 1 (Sr.No. iii) (Keeping Quality (Spot test))	-
Clause 5.1, Clause 4.2, Table 1 (Sr.No. ii) (Keeping Quality (Odour))	-
Clause 5.1, Clause 4.2, Table 1 (Sr.No. i) (Keeping Quality (Colour))	-
Clause 4.2, Table 1 (Sr.No. viii) (Hydrocarbon content)	-
Clause 4.2, Table 1 (Sr.No. vii) (Residue on evaporation)	-
Clause 4.2, Table 1 (Sr.No. vi) (Flash point (Abel))	-
Clause 4.2, Table 1 (Sr.No. v) (Distillation range)	-
Clause 4.2, Table 1 (Sr.No. iv) (Relative density at 27 °C)	-
Clause 4.2, Table 1 (Sr.No. iii) (Spot test)	-
Clause 4.2, Table 1 (Sr.No. ii) (Odour)	-
Clause 4.2, Table 1 (Sr.No. i) (Colour)	-

-
Karl fischer apparatus is required; EXCLUDING Water content;

13078

BIS, Central Laboratory (CL)

None

IS 1374 (2007)

Poultry feeds - Specification

9500 View breakup
Rs. 9500/- (For all in Table-1; Ca, Total P & available P in Table-2; Mn, I, Fe, Zn, Cu & Se in Table-3)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. No. 4.1 (Description)	-
Cl. No. 4.1.2,table1,i (Moisture,% by mass,Max.)	-
Cl. No. 4.1.2,table1,ii (Crude Protein (N×6.25),(on dry basis) % by mass,Min.)	-
Cl. No. 4.1.2,table1,iv (Crude fibre(on dry basis),% by mass,Max.)	-

-
-

13079

BIS, Central Laboratory (CL)

None

IS 14597 (1998)

Synthetic tarpaulins(Heavy Duty Protective Covers) made from coated nylon or polyester fabrics specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5 & Table 1 (Total mass per unit area)	-
Cl 5 & Table 1 (Breaking strength: Longitudinal Direction)	-
(Cl 4.5) (Coating)	-
Cl 6, (Cl. 6.2) (Construction: Fixing of Eyelets)	-
Cl 6, (Cl. 6.1) (Construction: Materials)	-
CL. 5.6 (Shear strength of joint )	-
CL. 5.5 (Resistance to cold)	-
CL. 5.2 (Accelerated ageing)	-
CL. 5.1 ( Workmanship)	-
(Cl 5 & Table 1) (Requirements )	-
5.3 (Water Proofness Test)	-
5.4 (Resistance to damage by Flexing)	-
5.9 Table 2 (Colour fastness to light)	-
5.9 Table 2 (Colour fastness to rubbing)	-
5.10.1 (Flame Resistance Test)	-
5.10.2 (Fusion)	-

-
EXCLUDING 5.3 Water Proofness Test, 5.4 Resistance to Damage by Flexing, 5.6 Shear Strength of Joints/Seams, Table 1, Tear strength, Breaking strength, Heat ageing, mass loss of coating,percent,;

13080

BIS, Central Laboratory (CL)

None

IS 6901 (2018)

Gas welding equipment - Pressure regulators and pressure regulators with flow - Metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPA) (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (Materials)	-

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number