BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15122 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

1321

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 9825 (2025)

Chlorine Tablets - Specification (Third Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2("Description ( IS 9825: 2025 )")	-	500	-
4.3("Mass of Tablets ( IS 9825: 2025 )")	-	1000	-
4.3("Available Chlorine ( IS 9825: 2025 )")	-	2000	-
4.4("Moisture ( IS 9825: 2025 )")	-	1500	-
4.5(Shelf Life (Amount of chlorine as per mass of tablet )( IS 9825: 2025 ))	-	5000	-

31 Dec, 2026

-
-

1322

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 6438 (2025)

Aluminium phosphide formulations - Specification (second revision)

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3.1(Constituents)	-	0	Test Not Applicable
Cl-3.2.1(Physical- Description of material)	-	1500	Testing charges for Cl. No. 3.2.1. Description and Average mass of 20 tablets or Pellets are Rs. 1500/-
Cl-3.3.1(Aluminium Phosphide Content)	-	2500	-
Cl-3.3.2(Evolation of Phosphide Gas)	-	1000	-
Cl-5(Marking)	-	0	Test Not Applicable

31 Dec, 2026

-
included w.e.f 17.03.2026

1323

ADS LABTECH, GHAZIABAD

8178326

IS 14735 (1999)

Unplasticized Polyvinyl Chloride (UPVC) Injection Moulded Fittings for Soil and Waste Discharge System for Inside and Outside Buildings Including Ventilation and Rain Water System -

UNPLASTICIZED POLYVINYLCHLORIDE (UPVC) INJECTION MOULDEDFITTINGS

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.14, Annex A(Titanium Di-Oxide Content)	-	700	-
Cl.13, IS 12235 (P-7)-2004, (Resistance to Sulphuric Acid)	-	500	-
Cl.15, Annex B(Sulphated Ash Content)	-	500	-
12.4(Effect on water test)	-	3000	all included test of effect on water
Cl 12.4(Effect on Water Lead (first extraction))	-	3000	all included test of effect on water
Cl 12.4(Effect on Water Lead (third extraction))	-	3000	all included test of effect on water
Cl 12.4(Effect on Water Dialkyl tin C4 and higher homologues(measured as tin )(third extraction ))	-	3000	all included test of effect on water
Cl 12.4(Effect on Water Cadmium (mean of first extraction, second extraction and third extraction))	-	3000	all included test of effect on water
Cl 12.4(Effect on Water Mercury (mean of first extraction, second extraction and third extraction))	-	3000	all included test of effect on water
19(Marking)	-	0	-
3(Type of Fitting)	-	200	-
4(Size Designation)	-	200	-
5(Colour of fittings)	-	200	-
7.1,Table 1(Wall thickness)	-	500	-
7.2 ,Table 2&3(Socket Dimensions)	-	200	-
7.3(Dimensions of waste trap(Nahani Trap)	-	200	-
8(Sealing Rings)	-	250	-
10(Workmanship)	-	0	-
11(Design requirements)	-	0	-
11.1(Solvent cement type or Rubber ring type)	-	500	-
11.2(Socket and spigot configeration)	-	200	-
11.4,Table 5(Vent cowl)	-	200	-
11.5,Table 6(Pipe Clips)	-	500	-
12(Physical test requirements)	-	1000	-
12.1(Visual appearance)	-	0	-
12.2(Stress relief test)	-	1000	-
12.3(Vicat softening tempewrature)	-	700	-
16(Mechanical Properties)	-	1000	-
16.1(Impact test)	-	1200	-
17(Watet tightness of joint)	-	1500	-
7.4(Chamfer)	-	200	-
11.3(Access Openings)	-	200	-
Table 4(Dimension of Access Openings)	-	300	-

15 May, 2027

-
Included w.e.f. 06.02.2026

1324

Standard Testing and Research Lab

9197206

IS 12823 (2025)

Prelaminated Medium Density Particle Boards from Wood and other Lignocellulosic Material Specification (Second Revision)

All Grade

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 5(Material - IS 3087)	-	11000	-
As per Clause 8 Table 2(Length -IS 2380 (Part 2))	-	11000	-
As per Clause 8 Table 2(Width - IS 2380 (Part 2))	-	11000	-
As per Clause 8 Table 2(Thickness - IS 2380 (Part 2))	-	11000	-
As per Clause 8 Table 2(Squareness, Max -IS 2380 (Part 2))	-	11000	-
As per Clause 8 Table 2(Edge Straighness, Max - IS 2380 (Part 2))	-	11000	-
As per Clause 9.1 Table 3(Density -IS 2380 (Part 3))	-	11000	-
As per Clause 9.1 Table 3(Variation from mean density, --IS 2380 (Part 3))	-	11000	-
As per Clause 9.1 Table 3(Moisture Content -IS 2380 (Part 3))	-	11000	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Modulus of rupture (MoR), Min.-IS 2380 (Part 4))	-	11000	-
As per Clause 9.1 Table 4, Table 6, Table 7(Modulus of elasticity (MoE), Min. -(IS 2380 (Part 4))	-	11000	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table7(Internal bond strength, Min. - IS 2380 (Part 5))	-	11000	-
As per Clause 9.1 Table 6, Table 7(24 h thickness swelling (due to general absorption) Max. - IS 2380 (Part 17))	-	11000	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Screw withdrawal strength (face) , Min. -IS 2380 (Part 4))	-	11000	-
As per Clause 9.1 Table 4, Table 5, table 6, Table 7(Screw withdrawal strength (edge) , Min. -IS 2380 (Part 4))	-	11000	-
As per Clause 9.1 , Table 6, Table 7(Moisture Resistance : Option 1 : Cyclic test (1. )Internal bond strength Min. -IS 2380 (Part 5) see note 1)	-	11000	-
As per Clause 9.1 , Table 6, Table 7(Moisture Resistance : Option 2 : Boil test (1.) Internal bond strength , Min.- IS 2380 (Part 5) see note 2)	-	11000	-
As per Clause 9.1 , Table 8(Abrasion resistance in number of revolutions Min. --Annex. B)	-	11000	-
As per Clause 9.1 , Table 8(Resiatnce to stream/water vapour - Annex. C)	-	11000	-
As per Clause 9.1 , Table 8(Resitance to crack -Annex. D)	-	11000	-
As per Clause 9.1 , Table 8(Resistance to cigarette burn -Annex. E)	-	11000	-
As per Clause 9.1 , Table 8(Resiatnce to stain - Annex. F)	-	11000	-
As per Clause 9.1 , Table 9(Formaldehyde content Fc, mg/100 g for oven dry board -IS 13745)	-	11000	-
As per Clause 9.1 , Table 9(Steady-state formaldehyde emission, Fc, mg/m3 (optional test))	-	0	-

24 Feb, 2029

-
Exclusion: As per Clause 9.1 , Table 9 (Steady-state formaldehyde emission, Fc, mg/m3 (optional test))

1325

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 5158 (2025)

Phthalic Anhydride, Technical - Specification (Third Revision)

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1, 3.1.1("Description ( IS 5158: 2025 )")	-	500	-
3.1, 3.1.2("Description ( IS 5158: 2025 )")	-	500	-
3.2, Table - 1 (i)(Crystallization point ( IS 5158: 2025 ))	-	1500	-
3.2, Table - 1 (ii)(Colour of the molten material, Pt-Co scale ( IS 5158: 2025 ))	-	1000	-
3.2, Table - 1 (iii)(Colour of the molten material after heat treatment, Pt-Co scale ( IS 5158: 2025 ))	-	1000	-
3.2, Table - 1 (iv)(Free Acidity [as C6H4(COOH)2] ( IS 5158: 2025 ))	-	1000	-
3.2, Table - 1 (v)(Purity by GC ( IS 5158: 2025 ))	-	2500	-
3.2, Table - 1 (vi)(Maleic Anhydride and other oxidizable impurities (as C4H2O3) ( IS 5158: 2025 ))	-	1000	-
3.2, Table - 1 (vii)(Ash ( IS 5158: 2025 ))	-	1000	-
3.2, Table - 1 (viii)(Iron ( IS 5158: 2025 ))	-	1000	-
3.2, Table - 1 (ix)(Naphthaquinone ( IS 5158: 2025 ))	-	1000	-
3.2, Table - 1 (x)(Naphthalene ( IS 5158: 2025 ))	-	1000	-
3.2, Table - 1 (xi)(Phthalimide ( IS 5158: 2025 ))	-	1000	-

31 Dec, 2026

-
included w.e.f 17.02.2026

1326

National Test House (NER) - NTH, Guwahati

5169204

IS 694 (2010)

Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 v (Fourth Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
13(Cable code)	-	0	-
11.2(Legibility)	-	0	-
11.1(Durability)	-	0	-
11(Identification)	-	0	-
10.4(Flammability test- Unaffected portion)	-	250	-
10.4(Flammability test-Burning after flame removal)	-	250	-
table 1 e) 3) (IR constant- Room temp )	-	500	-
table 1 e) 3) (Volume Resistivity - Maximum temp)	-	500	-
table 1 e) 3) (Volume Resistivity - Room temp )	-	500	-
10.2(HV (room temperature))	-	1500	-
10.1(HV (water immersion))	-	3000	-
10.1(HV (water immersion))	-	3000	-
10.8(Smoke density rating)	-	5000	-
10.6(Halogen evolution)	-	5000	-
10.7(Temperature index)	-	5000	-
10.5(Oxygen index)	-	5000	-
Table 1 iii) c) 8)(Cold bend for insulation)	-	1000	-
Table 1 iii) d) 7)(Thermal stability- Sheath )	-	1000	-
Table 1 iii) c) 7)(Thermal stability- Insulation )	-	1000	-
Table 1 iii) d) 6)(Hot deformation -Indentation depth - Sheath )	-	500	-
Table 1 iii) c) 6)(Hot deformation - Indentation depth- Insulation)	-	500	-
Table 1 iii) d) 3)(Sheath- Elongation variation)	-	500	-
Table 1 iii) d) 3)(Sheath- TS variation)	-	500	-
Table 1 iii) d) 3)(Sheath- Elongation (After ageing))	-	500	-
Table 1 iii) d) 3)(Sheath- Tensile strength (After ageing))	-	500	-
Table 1 iii) d) 1)(Sheath- Elongation (Without ageing))	-	500	-
Table 1 iii) d) 1)(Sheath -Tensile strength (Without ageing))	-	500	-
Table 1 iii) c) 3)(Elongation variation)	-	500	-
Table 1 iii) c) 3)(TS variation)	-	500	-
Table 1 iii) c) 3)(Elongation (After ageing))	-	500	-
Table 1 iii) c) 3)(Tensile strength (After ageing))	-	500	-
Table 1 iii) c) 1)(Elongation (Without ageing))	-	500	-
Table 1 iii) c) 1)(Tensile strength (Without ageing))	-	500	-
8.3(Thickness of Sheath)	-	250	-
5.3(Thickness of Insulation)	-	250	-
4.2(Conductor resistance test)	-	1500	-
4.1(Wrapping test (for Al))	-	500	-
9.1(Ovality)	-	250	-
Table 1 iii) d) 4)(Shrinkage- Sheath )	-	500	-
Table 1 iii) c) 4)(Shrinkage-Insulation)	-	500	-
Table 1 iii) d) 5)(Heat shock-Sheath )	-	500	-
Table 1 iii) c) 5)(Heat shock-Insulation )	-	500	-
Table 1 iii) d) 4)(Cracks Observed)	-	500	-
Table 1 iii) d) 2)(Loss of mass- Sheath )	-	1500	-
Table 1 iii) c) 2)(Loss of mass- Insulation )	-	1500	-
9(Overall dimensions)	-	250	-
4.1(Annealing test (for copper))	-	1000	-
4.1(Tensile test (for Al)- After Stranding)	-	1000	-
4.1(Tensile test (for Al)-Before Stranding)	-	1000	-
table 1 e) 3) (IR constant- max. Temp)	-	500	-
(Cl.16.1) (Cl.19.1)(Conductor- Diameter )	-	250	-
(Cl. 18.1.3) (Cl. 19.1.4) (Cl. 20.1.3) (Cl. 21.1.3) (Cl. 22.1.3)(Assembly of cores )	-	0	-
7(Binder Tape)	-	0	-
15(PACKING AND MARKING)	-	0	-
10.9(Additional Ageing Test (for Cables for Outdoor Use)	-	2000	-
9(OVERALL DIMENSIONS)	-	250	-
Cl. 8.2(Application of Sheath)	-	0	-
Cl.19.1.4(Assembly of Cores)	-	0	-
Table 1 iii) d) 9)(Cold impact for sheath)	-	1000	-
Table 1 iii) c) 9)(Cold impact for insulation)	-	1000	-
Table 1 iii) d) 8)(Cold bend for sheath)	-	1000	-
Table 1 iii) c) 4)(Cracks Observed)	-	500	-
10.1(High Voltage Test (Water Immersion Test))	-	3000	-
10.4(Flammability Test)	-	500	-
10.11(Per sulphate test (for tinned Cu cable only))	-	1000	-
12(CONSTRUCTION Core Identification)	-	0	-
16.1(Construction)	-	0	-
16.2(Tests)	-	0	-
(Cl. 18.1.4) (Cl. 19.1.5) (Cl. 20.1.4) (Cl. 22.1.4)(Colour of Sheath)	-	0	-
10.9(Additional ageing test (OU cables only) -HV test (at 60±3oC))	-	2000	-
8.1(Sheath Material )	-	0	-
12.0(Core identification)	-	0	-
Table 1(Category Code)	-	0	-
5.3(Minimum thickness of insulation)	-	250	-
5.3(Avarage thickness of insulation)	-	250	-
10.8(Smoke Density Rating)	-	5000	-
12(CORE IDENTIFICATION)	-	0	-
13(CABLE CODE)	-	0	-
4.1(Conductor - Material)	-	0	-
4.1(Conductor - Material)	-	0	-
5.3(Thickness of Insulation)	-	250	-
10.9(Additional Ageing Test (for Cables for Outdoor Use)	-	2000	-
9(OVERALL DIMENSIONS)	-	250	-
Cl. 8.2(Application of Sheath)	-	0	-
Cl.19.1.4(Assembly of Cores)	-	0	-
16.1(Construction)	-	0	-
16.2(Tests)	-	0	-
12(CORE IDENTIFICATION)	-	0	-
5.3(Thickness of Insulation)	-	250	-
10.9(Additional Ageing Test (for Cables for Outdoor Use)	-	2000	-
9(OVERALL DIMENSIONS)	-	500	-
Cl. 8.2(Application of Sheath)	-	0	-
Cl.19.1.4(Assembly of Cores)	-	0	-
16.1(Construction)	-	0	-
16.2(Tests)	-	0	-
12(CORE IDENTIFICATION)	-	0	-
5.3(Thickness of Insulation)	-	250	-
10.9(Additional Ageing Test (for Cables for Outdoor Use)	-	2000	-
9(OVERALL DIMENSIONS)	-	500	-
Cl. 8.2(Application of Sheath)	-	0	-
Cl.19.1.4(Assembly of Cores)	-	0	-
16.1(Construction)	-	0	-
16.2(Tests)	-	0	-
12(CORE IDENTIFICATION)	-	0	-
5.3(Thickness of Insulation)	-	250	-
10.9(Additional Ageing Test (for Cables for Outdoor Use)	-	2000	-
9(OVERALL DIMENSIONS)	-	250	-
Cl. 8.2(Application of Sheath)	-	0	-
Cl.19.1.4(Assembly of Cores)	-	0	-
16.1(Construction)	-	0	-
16.2(Tests)	-	0	-
12(CORE IDENTIFICATION)	-	0	-

13 Dec, 2027

-
Included w.e.f 12.02.2026 Exclusion: Cl 10.3 (Spark Test)

1327

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 3902 (2025)

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3.1(Description)	-	1000	-
Cl-3.2, Table-1, (i)(Dimethoate content, percent by mass, Min)	-	3500	-
Cl-3.2, Table-1, (ii)(Water content, percent by mass, Max)	-	1500	-
Cl-3.2, Table-1, (iii)(Material insoluble in acetone, percent by mass, Max)	-	1500	-
Cl-3.2, Table-1, (iv)(Acidity (as H2SO4), percent by mass, Max)	-	1500	-
Cl-5(Marking)	-	0	Test not applicable

31 Dec, 2026

-
included w.e.f 22.01.2026

1328

Stellar Test House, Noida

8171606

IS 1542 (1992)

Sand for plaster - Secification (Second Revision)

All types and grade

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(General)	-	500	-
4.2(Deterious Materials)	-	6000	-
4.3(Limits of Deleterious Materials)	-	1000	-
5(Grading of Sand)	-	1000	-
7(ADDITIONAL INFORMATION TO BE FURNISHED BY THE SUPPLIER)	-	0	-
4.1(General)	-	0	-
4.2(Deterious Materials)	-	0	-
4.3(Limits of Deleterious Materials)	-	0	-
5(Grading of Sand)	-	0	-
7(ADDITIONAL INFORMATION TO BE FURNISHED BY THE SUPPLIER)	-	0	-

26 Sep, 2028

-
included w.e.f 01.04.2026

1329

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 733 (2025)

Wrought Aluminium and Aluminium Alloy Bars, Rods, Sections, Extruded Tube, Hollow Sections and Profiles for General Engineering Purposes ? Specification (Fourth Revision)

ALL

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General requirements)	-	0	-
Cl-6.1, Table-1 to 8(Fe)	-	0	>0.5 @ 4500
Cl-6.1, Table-1 to 8(Cu)	-	4500	-
Cl-6.1, Table-1 to 8(Mn)	-	4500	-
Cl-6.1, Table-1 to 8(Mg)	-	4500	-
Cl-6.1, Table-1 to 8(Cr)	-	4500	-
Cl-6.1, Table-1 to 8(Zn)	-	4500	-
Cl-6.1, Table-1 to 8(Ti)	-	4500	-
Cl-6.1, Table-1 to 8(V)	-	4500	-
Cl-6.1, Table-1 to 8(Aluminium)	-	4500	-
Cl-6.2(chemical analysis)	-	4500	Boron analysis @ 4500
Cl-7.1, 7.2 & 7.3, Table-9(Dimensions)	-	4500	-
Cl-7.1, 7.2 & 7.3, Table-9(Rm MPa)	-	4500	-
Cl-7.1, 7.2 & 7.3, Table-9(Rp0.2 MPa)	-	4500	-
Cl-7.1, 7.2 & 7.3, Table-9(Elongation , Percent)	-	4500	-
Cl-9(Dimensions and Tolerances)	-	4500	-
Cl-12(Packaging and Marking)	-	0	-
Cl-7.1(Tensile test)	-	4500	-
Cl-5(Freedom from Defects)	-	4500	-
Cl-6.1, Table-1 to 8(Si)	-	4500	-
Cl-4(General requirements)	-	0	-
Cl-6.1, Table-1 to 8(Fe)	-	0	-
Cl-6.1, Table-1 to 8(Cu)	-	0	-
Cl-6.1, Table-1 to 8(Mn)	-	0	-
Cl-6.1, Table-1 to 8(Mg)	-	0	-
Cl-6.1, Table-1 to 8(Cr)	-	0	-
Cl-6.1, Table-1 to 8(Zn)	-	0	-
Cl-6.1, Table-1 to 8(Ti)	-	0	-
Cl-6.1, Table-1 to 8(V)	-	0	-
Cl-6.1, Table-1 to 8(Aluminium)	-	0	-
Cl-6.2(chemical analysis)	-	0	-
Cl-7.1, 7.2 & 7.3, Table-9(Dimensions)	-	0	-
Cl-7.1, 7.2 & 7.3, Table-9(Rm MPa)	-	0	-
Cl-7.1, 7.2 & 7.3, Table-9(Rp0.2 MPa)	-	0	-
Cl-7.1, 7.2 & 7.3, Table-9(Elongation , Percent)	-	0	-
Cl-9(Dimensions and Tolerances)	-	0	-
Cl-12(Packaging and Marking)	-	0	-
Cl-7.1(Tensile test)	-	0	-
Cl-5(Freedom from Defects)	-	0	-
Cl-6.1, Table-1 to 8(Si)	-	0	-

-
Included w.e.f 19.02.2026

1330

National Test House (WR) - NTH, Mumbai

7107604

IS 12786 (2024)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification (first revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.2(Carbon content of finished PE lateral pipe)	-	1000	-
Cl-5.1(Dimensions of pipes and wall thicknesses)	-	1000	-
Cl-6.0(Visual Appearance)	-	500	-
Cl-7.1(Hydraulic Characteristics- Internal pressure creep rupture test)	-	5000	-
Cl-7.1(Hydraulic Characteristics- quality acceptance test)	-	6000	-
Cl-7.2(Reversion Test)	-	1000	-
Cl-7.3(Tensile Test)	-	1000	-
Cl-7.3.1(Test Piece)	-	0	-
Cl-7.3.2(Procedure)	-	0	-
Cl-7.4(Susceptibility to Environmental Stress Cracking)	-	1000	-
Cl-8.0(Supply of pipes)	-	0	-
Cl-9.0(Coiling)	-	0	-
Cl-10.0(Sampling and criteria for conformity)	-	0	-
Cl-11(Marking)	-	500	-
3(Class of Pipe)	-	500	-
5.1 & Table 1(Dimensions of Pipes - Outside diameters)	-	1000	-
5.1 & Table 1(Dimensions of Pipes - Wall thickness)	-	1000	-
6(Visual Appearance)	-	500	-
7.1 & Table 2(Hydraulic Characteristics)	-	5000	-
7.1 & Table 2(Hydraulic Characteristics)	-	6000	-
7.2(Reversion Test)	-	1000	-
7.3(Tensile Strength)	-	1000	-
7.3(Elongation at Break)	-	1000	-
7.4(SusceptibiIity to Environmental Stress Cracking)	-	1000	-
4.2(a)(Carbon Black Content-IS 2530)	-	1000	-
4.2(b)(Carbon Black Dispersion-IS 2530)	-	500	-

-
Included w.e.f 22.01.2026

1331

CIPET:CSTS Amritsar

9120034

IS 16703 (2017)

Textiles - High density polyethylene (HDPE) polypropylene (PP) woven sacks for packaging of 25 kg polymer materials - Specification

Textiles - High density polyethylene (HDPE) polypropylene (PP) woven sacks for packaging of 25 kg polymer materials

28380 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Mass of Bale)	-	500	-
5.2 Table 1(Dimensions)	-	500	-
5.2 Table 1(Dimensions)	-	0	-
5.2 Table 1(Dimensions)	-	0	-
5.2 Table 1(Dimensions)	-	0	-
5.2 Table 1(Ends per dm)	-	500	-
5.2 Table 1(Picks per dm)	-	500	-
5.2 Table 1(Mass of sack, Gusseted type, g - IS 1964)	-	500	-
5.2 Table 1(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N) (kgf): - IS 1969 (Part 1))	-	1600	1100 Testing Charges + 500 Specimen Charges
5.2 Table 1(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N2) (kgf): - IS 1969 (Part 1))	-	1100	-
5.2 Table 1(Breaking strength of bottom seam (Ravelled strip method), Min, N) (kgf) - IS 9030)	-	1600	1100 Testing Charges + 500 Specimen Charges
5.2 Table 1(Elongation at break of fabric (Ravelled strip method), percent : IS 1969 (Part 1))	-	0	-
5.2 Table 1(Elongation at break of fabric (Ravelled strip method), percent : IS 1969 (Part 1))	-	0	-
5.2 Table 1(Drop impact strength)	-	1100	-
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,a) For UV stabilized sacks)	-	1200	-
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,b) For non- UV stabilized sacks)	-	1200	-
4.6(Capacity)	-	500	-
4.3.1(Bottom Seam)	-	500	-
4.3(Sacks)	-	500	-
4.2,5.1,5.2,5.3,5.4(Breaking strenght after U.V. Exposure (Warp/Weft))	-	2700	2200 Testing Charges + 500 Specimen Charges
4.2,5.1,5.2,5.3,5.4,(UV Resistance (192 hrs)(100 x 65+92x40))	-	10180	-
4.2(Linear Density)	-	700	-
4.2(Width of tape)	-	500	-
Cl-4.4(Lamination Mass)	-	500	-
Cl-4.5(Liner- Thickness)	-	500	-
Cl-4.2 (Amendment No-2)(un-laminated fabric mass)	-	500	-
Cl-4.5(Liner- Width)	-	500	-
Cl-4.5(Liner- Visible defects)	-	500	-
4.6(Capacity)	-	-	-
4.3.1(Bottom Seam)	-	-	-
4.3(Sacks)	-	-	-
4.2,5.1,5.2,5.3,5.4(Breaking strenght after U.V. Exposure (Warp/Weft))	-	-	-
4.2,5.1,5.2,5.3,5.4,(UV Resistance (192 hrs)(100 x 65+92x40))	-	-	-
4.2(Linear Density)	-	-	-
4.2(Width of tape)	-	-	-
Cl-4.4(Lamination Mass)	-	-	-
Cl-4.5(Liner- Thickness)	-	-	-
Cl-4.2 (Amendment No-2)(un-laminated fabric mass)	-	-	-
Cl-4.5(Liner- Width)	-	-	-
Cl-4.5(Liner- Visible defects)	-	-	-

06 Jan, 2027

-
included w.e.f 27.01.2026

1332

VERTEX TESTING LABORATORY PRIVATE LIMITED, GHAZIABAD

8185906

IS 2185 : Part 3 (1984)

Concrete Masonry Units Part 3 Autoclaved Cellular Aerated Concrete Blocks

Grade-1&2/All Size

21000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Physical requirments)	-	1000	-
8.2(Physical requirments-Dimensions-Length)	-	1000	-
8.2(Physical requirments-Dimensions-Height)	-	1000	-
8.2(Physical requirments-Dimensions-Width)	-	1000	-
8.3(Physical requirments- Block density)	-	1000	-
8.4(Physical requirments- Compressive strength)	-	1000	-
8.5(Thermal Conductivity)	-	5000	-
8.6( Drying Shrinkage )	-	1000	-
8.4, 9.2 & 11.3(Indivisual Moisture Content)	-	1000	-
8.4, 9.2 & 11.3(Indivisual Bulk density)	-	1000	-
8.4, 9.2 & 11.3 & Table 1(Indivisual Compressive strength)	-	1000	-
8.3 & 9.1(Indivisual Moisture Content)	-	1000	-
8.3 & 9.1 Table 1(Indivisual Block Density)	-	1000	-
3.2 & 8.2(Indivisual Height)	-	1000	-
3.2 & 8.2(Indivisual Width)	-	1000	-
3.2 & 8.2(Indivisual Length)	-	1000	-
8.6, 9.4 & 11.5(Grade)	-	1000	-
3.4(Special Faces)	-	1000	-
3.3(Faces & Arises)	-	1000	-
3.1(Shape)	-	1000	-
8.1.1(General (Exposed wall construction))	-	1000	-
5(MATERIALS)	-	1000	-
7(SURFACE TEXTURE AND FINISH)	-	1000	-
9.3(Thermal Conductivity)	-	5000	-
15(Marking)	-	1000	-

23 May, 2028

-
Included w.e.f. 30.01.2026

1333

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 13238 (2021)

EPOXY BASED ZINC PHOSPHATE PRIMER TWO PACK - SPECIFICATION FIRST REVISION

22000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Composition)	-	1999.99	-
4.2(Lead Restriction)	-	1000	-
5(Packing and marking)	-	500	-
4.3, Table 1(i) Consistency)	-	500	-
4.3, Table 1(ii) Drying time, Max, h:)	-	2000	-
4.3, Table 1(iii) Finish)	-	500	-
4.3, Table 1(iv) Colour)	-	500	-
4.3, Table 1(v) Dry film thickness per coat:)	-	500	-
4.3, Table 1(vi) Volume solids, percent, Min)	-	1000	-
4.3, Table 1(vii) Flexibility and adhesion: a) Bend test)	-	500	-
4.3, Table 1(vii) Flexibility and adhesion: b) Scratch hardness)	-	500	-
4.3, Table 1(viii) Flash point (for each component))	-	500	-
4.3, Table 1(ix) a) Resistance to humidity)	-	4000	-
4.3, Table 1(ix) b) Resistance to salt spray)	-	2000	-
4.3, Table 1(x) Pot life)	-	1000	-
4.3, Table 1(xi) Mass)	-	500	-
4.3, Table 1(xii) Keeping properties)	-	2000	-
Clause-4.1 (Composition)	-	2000	-
Clause-4.1.1.1(Epoxy resin)	-	1000	-
Clause-4.1.1.2(Zinc phosphate)	-	1000	-
Clause-4.2(Lead Restriction)	-	1000	-
Clause-4.3 & 7.1 Table-1 S.No-1 (i)(Consistency)	-	500	-
Clause-4.3 & 7.1 Table-1 S.No-1 (ii)(Drying time, Max, h:)	-	2000	-
Clause-4.3 & 7.1 Table-1 S.No-1 (iii)(Finish)	-	500	-
Clause-4.3 & 7.1 Table-1 S.No-1 (iv)(Colour)	-	500	-
Clause-4.3 & 7.1 Table-1 S.No-1 (v)(Dry film thickness per coat:)	-	500	-
Clause-4.3 & 7.1 Table-1 S.No-1 (vi)(Volume solids, percent, Min)	-	1000	-
Clause-4.3 & 7.1 Table-1 S.No-1 (vii), a)(Bend test (with 6.25 mm dia mandrel and type 1 apparatus))	-	500	-
Clause-4.3 & 7.1 Table-1 S.No-1 (vii), b)(Scratch hardness (1 500 g))	-	500	-
Clause-4.3 & 7.1 Table-1 S.No-1 (viii)(Flash point (for each component))	-	500	-
Clause-4.3 & 7.1 Table-1 S.No-1 (ix), a)(Resistance to humidity)	-	4000	-
Clause-4.3 & 7.1 Table-1 S.No-1 (ix), b)(Resistance to salt spray)	-	2000	-
Clause-4.3 & 7.1 Table-1 S.No-1 (x)(Pot life, h, 27 ± 2 °C, Min)	-	1000	-
Clause-4.3 & 7.1 Table-1 S.No-1 (xi)(Mass, in kg/10 Iitre, Min)	-	500	-
Clause-4.3 & 7.1 Table-1 S.No-1 (xii)(Keeping properties)	-	2000	-
Clause-5(Packing and Marking )	-	500	-

-
included w.e.f 24.02.2026

1334

Matrix Test Labs

8138626

IS 302 : Part 2 : Sec 59 (2024)

Household and Similar Electrical Appliances â Safety Part 2 Particular Requirements Section 59 Insect Killers (First Revision)

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 32 302-2-59 : 1999(Radiation Hazards)	-	1000	-
Cl. 31 302-2-59 : 1999(Resistance to Rusting)	-	1000	-
Cl. 30 302-2-59 : 1999(Resistance to Heat Fire & Tracking )	-	1000	-
Cl. 29 302-2-59 : 1999(Clearances, Creepage Distances & Solid insulation )	-	1000	-
Cl. 28 302-2-59 : 1999(Screws & Connections)	-	1000	-
Cl. 27 302-2-59 : 1999(Provision for Earthing )	-	1000	-
Cl. 26 302-2-59 : 1999(Terminals for External conductors )	-	1000	-
(CI. 6 IS 302-2-59 : 1999(Classification )	-	500	-
Cl. 7 302-2-59 : 1999(Marking)	-	500	-
Cl. 8 302-2-59 : 1999(Protection Against Electric Shock )	-	1000	-
Cl. 9 302-2-59 : 1999(Starting of motor operated appliances)	-	500	-
Cl. 10 302-2-59 : 1999(Power Input and Current )	-	1500	-
Cl. 11 302-2-59 : 1999(Temperature Rise)	-	1500	-
Cl. 13 302-2-59 : 1999(Leakage Current & Electric Strength at Operating Temperature)	-	1000	-
Cl. 14 302-2-59 : 1999(Radio and television interference suppression / Transient over voltages)	-	1000	-
Cl. 15 302-2-59 : 1999(Moisture Resistance Test )	-	1000	-
Cl. 16 302-2-59 : 1999(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	1000	-
Cl. 17 302-2-59 : 1999(Overload Protection of Transformers and Associated Circuit)	-	1000	-
Cl. 18 302-2-59 : 1999(Endurance)	-	0	-
Cl. 20 302-2-59 : 1999(Stability & Mechanical Hazards)	-	1000	-
Cl. 19 302-2-59 : 1999(Abnormal Operation )	-	1500	-
Cl. 21 302-2-59 : 1999(Mechanical strength)	-	1000	-
Cl. 22 302-2-59 : 1999(Construction )	-	1000	-
Cl. 23 302-2-59 : 1999(Internal Wiring)	-	1000	-
Cl. 25 302-2-59 : 1999(Supply Connection & External Flexible Cords)	-	1000	-
32(Radiation, toxicity and similar hazards)	-	1000	-
31(RESISTANCE TO RUSTING)	-	1000	-
30("RESISTANCE TO HEAT, FIRE AND TRACKING ")	-	1000	-
29(Clearances, creepage distances and solid insulation)	-	1000	-
28(SCREWS AND CONNECTIONS)	-	1000	-
27(PROVISION FOR EARTHING)	-	1000	-
26("TERMINALS FOR EXTERNAL CONDUCTORS")	-	1000	-
6(Classification)	-	500	-
7(Marking and instructions)	-	500	-
8("8 PROTECTION AGAINST ELECTRIC SHOCK ")	-	1000	-
5(General conditions for the tests)	-	500	-
10(Power input and current)	-	1500	-
11(Heating)	-	1500	-
13(Leakage current and electric strength at operating temperature)	-	1000	-
14(Transient overvoltages)	-	1000	-
15(MOISTURE RESISTANCE)	-	1000	-
16(Leakage current and electric strength)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	500	-
11.3(Heating)	-	500	-
20("STABILITY AND MECHANICAL HAZARDS")	-	500	-
19(ABNORMAL OPERATION)	-	1500	-
21(MECHANICAL STRENGTH)	-	500	-
22(CONSTRUCTION)	-	500	-
23(INTERNAL WIRING)	-	500	-
25("SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS ")	-	500	-
4(General)	-	500	-
12(Charging of metal-ion batteries)	-	1000	-
11.7(Heating)	-	500	-
11.8(Heating)	-	500	-

31 Dec, 2026

-
Included w.e.f 09.02.2026 "19.11.4.1 (Electrostatic discharges) 19.11.4.2 (Radiated fields) 19.11.4.3 (Fast transient bursts) 19.11.4.4 (Voltage surges) 19.11.4.5 (Injected currents) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.7 (Mains signals) 24 (COMPONENTS)"

1335

Akshat Test Lab & Calibration Services, Ghaziabad

8186526

IS 302 : Part 2 : SEC 31 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 31 range hoods

23800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No - 5(GENERAL CONDITIONS FOR THE TESTS)	-	1000	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
Clause No - 5.18(linear and angular dimension)	-	1000	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
Clause No - 6.2(harmfull ingress of water)	-	1000	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
Clause No - 8.1.1("PROTECTION AGAINST ACCESS TO LIVE PART- test probe B")	-	1000	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
Clause No - 8.1.2("PROTECTION AGAINST ACCESS TO LIVE PART - test probe 13")	-	1000	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
Clause No - 8.2(Addition)	-	1000	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
Clause No - 10.1, Table No. -1(power input deviation)	-	1000	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
Clause No - 13.3("LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE")	-	1000	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
Clause No - 13.3,Table No.- 4(voltage for electrical strength)	-	1000	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
Clause No - 14(Impulse test voltage)	-	1000	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
Clause No - 15.1.1(MOISTURE RESISTANCE)	-	1500	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
Clause No -19.7(test is repeated with the capacitor short circuited)	-	1500	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
Clause No -21.1(Mechanical strength)	-	1000	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
Clause No -22.1(construction)	-	1000	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
Clause No -22.11(push force applied)	-	1000	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
Clause No -24.1.2(safety isolating transformer)	-	1000	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
Clause No -24.1.3(for switches)	-	1000	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
Clause No -24.1.5(for innterconnection couplers)	-	1000	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
Clause No -24.4(plug and socket)	-	1000	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
Clause No -25.8, Table no -11(conductor resistance)	-	1000	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
Clause No -25.5(dimension for pins)	-	1000	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
Clause No -27.6(for circuit board)	-	1500	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
Clause No -29.2(comparative tracking index)	-	1000	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
Clause No -29.3.3(dry heat test)	-	1000	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
Clause No -30.2.1(glow wire test)	-	1000	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
Clause No -30.101("incorporate combustible material")	-	1000	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
15(MOISTURE RESISTANCE)	-	1500	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	1500	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	1000	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
18(ENDURANCE)	-	1000	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
28(SCREWS AND CONNECTIONS)	-	1000	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
31(RESISTANCE TO RUSTING)	-	1000	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
22(CONSTRUCTION)	-	1500	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
24(COMPONENTS)	-	1500	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	1000	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
11(Heating)	-	1500	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.

-
"1 Clause No -19.11.4.1 (electrostatic discharge) Electrostatic discharge Test facility not available 2 Clause No -19.11.4.2 (radiated field) Radiated fields Test facility not available 3 Clause No -19.11.4.3 (fast transient) Fast transient Test facility not available 4 Clause No -19.11.4.4 (Voltage dips and interruption) Voltage dips and interruption Test facility not available 5 Clause No -24.1.4 (for automatic control) For automatics control Test facility not available 6 Clause No -24.1.5 (for innterconnection couplers) For innterconnection couplers Test facility not available 7 19.11.4.5 (Immunity to conducted discharges) Immunity to conducted discharges Test facility not available 8 19.11.4.6 (Class 3 Voltage dips and interruptions) Voltage dips and interruptions Test facility not available 9 19.11.4.7 (Harmonics) Harmonics Test facility not available"

1336

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 11652 (2017)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg cement – Specification (third revision)

ALL

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	30000	-
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	30000	-
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	30000	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	30000	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	30000	-
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	30000	-
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	30000	-
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	30000	-
4.1(Raw Material )	-	0	-
4.2 (Fabric)	-	0	-
4.2 (Linear Density, 900 denier)	-	30000	-
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	30000	-
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	30000	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	0	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	30000	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	30000	-
4.3(Sacks)	-	0	-
4.4(Seam )	-	0	-
4.4(Seam )	-	0	-
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	0	-
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	0	-
4.4(Seam The stitching shall be done with double fold over seam to)	-	0	-
4.4(to a depth of minimum 25 mm, so that so that)	-	30000	-
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	0	-
4.4(The number of stitches/dm shall be 14 ± 2.)	-	30000	-
4.4(Seam)	-	0	-
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	0	-
4.4(Seam)	-	0	-
4.4(Seam)	-	0	-
4.4(Seam)	-	0	-
4.5(Lamination )	-	0	-
4.5(Lamination )	-	0	-
4.5(Lamination )	-	0	-
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	0	-
4.7(Valve for Filling of Sacks)	-	0	-
4.7(There shall be a double fold at the top seam and)	-	0	-
4.7(and then stitching shall be done through six layers.)	-	0	-
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	30000	-
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	30000	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	30000	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	30000	-
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	30000	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	30000	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	30000	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	30000	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	30000	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	30000	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	30000	-
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	30000	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	30000	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	30000	-
5/5.6 (UV Resistance, )	-	30000	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	30000	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	30000	-
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	30000	-
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	30000	-
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	30000	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	30000	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	30000	-
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	30000	-
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	30000	-
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	30000	-
4.1(Raw Material )	-	0	-
4.2 (Fabric)	-	0	-
4.2 (Linear Density, 900 denier)	-	30000	-
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	30000	-
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	30000	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	0	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	30000	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	30000	-
4.3(Sacks)	-	0	-
4.4(Seam )	-	0	-
4.4(Seam )	-	0	-
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	0	-
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	30000	-
4.4(Seam The stitching shall be done with double fold over seam to)	-	0	-
4.4(to a depth of minimum 25 mm, so that so that)	-	30000	-
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	0	-
4.4(The number of stitches/dm shall be 14 ± 2.)	-	30000	-
4.4(Seam)	-	0	-
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	0	-
4.4(Seam)	-	0	-
4.4(Seam)	-	0	-
4.4(Seam)	-	0	-
4.5(Lamination )	-	0	-
4.5(Lamination )	-	0	-
4.5(Lamination )	-	0	-
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	30000	-
4.7(Valve for Filling of Sacks)	-	0	-
4.7(There shall be a double fold at the top seam and)	-	0	-
4.7(and then stitching shall be done through six layers.)	-	0	-
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	30000	-
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	30000	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	30000	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	30000	-
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	0	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	30000	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	30000	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	30000	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	30000	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	30000	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	30000	-
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	30000	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	30000	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	30000	-
5/5.6 (UV Resistance, )	-	30000	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	30000	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	30000	-
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	30000	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	30000	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	30000	-
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	30000	-
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	30000	-
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	30000	-
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	30000	-
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	30000	-
4.1(Raw Material )	-	0	-
4.2 (Fabric)	-	0	-
4.2 (Linear Density, 900 denier)	-	30000	-
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	30000	-
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	30000	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	0	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	30000	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	30000	-
4.3(Sacks)	-	0	-
4.4(Seam )	-	0	-
4.4(Seam )	-	0	-
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	0	-
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	30000	-
4.4(Seam The stitching shall be done with double fold over seam to)	-	0	-
4.4(to a depth of minimum 25 mm, so that so that)	-	30000	-
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	0	-
4.4(The number of stitches/dm shall be 14 ± 2.)	-	30000	-
4.4(Seam)	-	0	-
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	0	-
4.4(Seam)	-	0	-
4.4(Seam)	-	0	-
4.4(Seam)	-	0	-
4.5(Lamination )	-	0	-
4.5(Lamination )	-	0	-
4.5(Lamination )	-	0	-
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	30000	-
4.7(Valve for Filling of Sacks)	-	0	-
4.7(There shall be a double fold at the top seam and)	-	0	-
4.7(and then stitching shall be done through six layers.)	-	0	-
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	0	-
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	30000	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	30000	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	30000	-
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	30000	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	30000	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	30000	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	30000	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	30000	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	30000	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	30000	-
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	30000	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	30000	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	30000	-
5/5.6 (UV Resistance, )	-	30000	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	30000	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	30000	-
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	30000	-
Cl-5 Fig. 1- Table 1- Sr. no. ii(Ends per dm - Annex B 40 ± 2)	-	30000	-
Cl-5 Fig. 1- Table 1-Sr. no. iii(Picks per dm-Annex B 40 ± 2)	-	30000	-
Cl-5, Fig. 1- Table 1- Sr. no. i(Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm)	-	30000	-
Cl-5, Fig. 1- Table 1- Sr. no. i(Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm)	-	30000	-
Cl-5, Fig. 1- Table 1-Sr. no. i(Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm)	-	30000	-
Cl-5, Fig. 1, Table 1(i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm)	-	30000	-
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	30000	-
4.1(Raw Material )	-	0	-
4.2 (Fabric)	-	0	-
4.2 (Linear Density, 900 denier)	-	30000	-
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	30000	-
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	30000	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	0	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	30000	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	30000	-
4.3(Sacks)	-	0	-
4.4(Seam )	-	0	-
4.4(Seam )	-	0	-
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	0	-
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	30000	-
4.4(Seam The stitching shall be done with double fold over seam to)	-	0	-
4.4(to a depth of minimum 25 mm, so that so that)	-	30000	-
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	0	-
4.4(The number of stitches/dm shall be 14 ± 2.)	-	30000	-
4.4(Seam)	-	0	-
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	0	-
4.4(Seam)	-	0	-
4.4(Seam)	-	0	-
4.4(Seam)	-	0	-
4.5(Lamination )	-	0	-
4.5(Lamination )	-	0	-
4.5(Lamination )	-	0	-
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	30000	-
4.7(Valve for Filling of Sacks)	-	0	-
4.7(There shall be a double fold at the top seam and)	-	0	-
4.7(and then stitching shall be done through six layers.)	-	0	-
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	0	-
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	30000	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	30000	-
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	0	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	30000	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	30000	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	30000	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	30000	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	30000	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	30000	-
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	30000	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	30000	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	30000	-
5/5.6 (UV Resistance, )	-	30000	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	30000	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	30000	-
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	0	-
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	0	-
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	0	-
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	0	-
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	0	-
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	0	-
4.1(Raw Material )	-	0	-
4.2 (Fabric)	-	0	-
4.2 (Linear Density, 900 denier)	-	0	-
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	0	-
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	0	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	0	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
4.3(Sacks)	-	0	-
4.4(Seam )	-	0	-
4.4(Seam )	-	0	-
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	0	-
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	0	-
4.4(Seam The stitching shall be done with double fold over seam to)	-	0	-
4.4(to a depth of minimum 25 mm, so that so that)	-	0	-
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	0	-
4.4(The number of stitches/dm shall be 14 ± 2.)	-	0	-
4.4(Seam)	-	0	-
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	0	-
4.4(Seam)	-	0	-
4.4(Seam)	-	0	-
4.4(Seam)	-	0	-
4.5(Lamination )	-	0	-
4.5(Lamination )	-	0	-
4.5(Lamination )	-	0	-
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	0	-
4.7(Valve for Filling of Sacks)	-	0	-
4.7(There shall be a double fold at the top seam and)	-	0	-
4.7(and then stitching shall be done through six layers.)	-	0	-
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	0	-
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	0	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	0	-
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	0	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	0	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	0	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	0	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	0	-
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	0	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	0	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	0	-
5/5.6 (UV Resistance, )	-	0	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	0	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	0	-
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	0	-
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	0	-
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	0	-
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	0	-
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	0	-
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	0	-
4.1(Raw Material )	-	0	-
4.2 (Fabric)	-	0	-
4.2 (Linear Density, 900 denier)	-	0	-
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	0	-
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	0	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	0	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
4.3(Sacks)	-	0	-
4.4(Seam )	-	0	-
4.4(Seam )	-	0	-
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	0	-
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	0	-
4.4(Seam The stitching shall be done with double fold over seam to)	-	0	-
4.4(to a depth of minimum 25 mm, so that so that)	-	0	-
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	0	-
4.4(The number of stitches/dm shall be 14 ± 2.)	-	0	-
4.4(Seam)	-	0	-
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	0	-
4.4(Seam)	-	0	-
4.4(Seam)	-	0	-
4.4(Seam)	-	0	-
4.5(Lamination )	-	0	-
4.5(Lamination )	-	0	-
4.5(Lamination )	-	0	-
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	0	-
4.7(Valve for Filling of Sacks)	-	0	-
4.7(There shall be a double fold at the top seam and)	-	0	-
4.7(and then stitching shall be done through six layers.)	-	0	-
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	0	-
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	0	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	0	-
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	0	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	0	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	0	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	0	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	0	-
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	0	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	0	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	0	-
5/5.6 (UV Resistance, )	-	0	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	0	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	0	-
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	0	-
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	0	-
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	0	-
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	0	-
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	0	-
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	0	-
4.1(Raw Material )	-	0	-
4.2 (Fabric)	-	0	-
4.2 (Linear Density, 900 denier)	-	0	-
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	0	-
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	0	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	0	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
4.3(Sacks)	-	0	-
4.4(Seam )	-	0	-
4.4(Seam )	-	0	-
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	0	-
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	0	-
4.4(Seam The stitching shall be done with double fold over seam to)	-	0	-
4.4(to a depth of minimum 25 mm, so that so that)	-	0	-
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	0	-
4.4(The number of stitches/dm shall be 14 ± 2.)	-	0	-
4.4(Seam)	-	0	-
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	0	-
4.4(Seam)	-	0	-
4.4(Seam)	-	0	-
4.4(Seam)	-	0	-
4.5(Lamination )	-	0	-
4.5(Lamination )	-	0	-
4.5(Lamination )	-	0	-
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	0	-
4.7(Valve for Filling of Sacks)	-	0	-
4.7(There shall be a double fold at the top seam and)	-	0	-
4.7(and then stitching shall be done through six layers.)	-	0	-
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	0	-
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	0	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	0	-
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	0	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	0	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	0	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	0	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	0	-
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	0	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	0	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	0	-
5/5.6 (UV Resistance, )	-	0	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	0	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	0	-
Cl-5 Fig. 1- Table 1- Sr. no. ii(Ends per dm - Annex B 40 ± 2)	-	0	-
Cl-5 Fig. 1- Table 1-Sr. no. iii(Picks per dm-Annex B 40 ± 2)	-	0	-
Cl-5, Fig. 1- Table 1- Sr. no. i(Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm)	-	0	-
Cl-5, Fig. 1- Table 1- Sr. no. i(Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm)	-	0	-
Cl-5, Fig. 1- Table 1-Sr. no. i(Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm)	-	0	-
Cl-5, Fig. 1, Table 1(i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm)	-	0	-
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	0	-
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	0	-
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	0	-
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	0	-
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	0	-
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	0	-
4.1(Raw Material )	-	0	-
4.2 (Fabric)	-	0	-
4.2 (Linear Density, 900 denier)	-	0	-
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	0	-
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	0	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	0	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
4.3(Sacks)	-	0	-
4.4(Seam )	-	0	-
4.4(Seam )	-	0	-
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	0	-
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	0	-
4.4(Seam The stitching shall be done with double fold over seam to)	-	0	-
4.4(to a depth of minimum 25 mm, so that so that)	-	0	-
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	0	-
4.4(The number of stitches/dm shall be 14 ± 2.)	-	0	-
4.4(Seam)	-	0	-
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	0	-
4.4(Seam)	-	0	-
4.4(Seam)	-	0	-
4.4(Seam)	-	0	-
4.5(Lamination )	-	0	-
4.5(Lamination )	-	0	-
4.5(Lamination )	-	0	-
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	0	-
4.7(Valve for Filling of Sacks)	-	0	-
4.7(There shall be a double fold at the top seam and)	-	0	-
4.7(and then stitching shall be done through six layers.)	-	0	-
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	0	-
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	0	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	0	-
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	0	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	0	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	0	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	0	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	0	-
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	0	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	0	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	0	-
5/5.6 (UV Resistance, )	-	0	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	0	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	0	-
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	0	-
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	0	-
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	0	-
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	0	-
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	0	-
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	0	-
4.1(Raw Material )	-	0	-
4.2 (Fabric)	-	0	-
4.2 (Linear Density, 900 denier)	-	0	-
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	0	-
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	0	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	0	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
4.3(Sacks)	-	0	-
4.4(Seam )	-	0	-
4.4(Seam )	-	0	-
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	0	-
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	0	-
4.4(Seam The stitching shall be done with double fold over seam to)	-	0	-
4.4(to a depth of minimum 25 mm, so that so that)	-	0	-
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	0	-
4.4(The number of stitches/dm shall be 14 ± 2.)	-	0	-
4.4(Seam)	-	0	-
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	0	-
4.4(Seam)	-	0	-
4.4(Seam)	-	0	-
4.4(Seam)	-	0	-
4.5(Lamination )	-	0	-
4.5(Lamination )	-	0	-
4.5(Lamination )	-	0	-
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	0	-
4.7(Valve for Filling of Sacks)	-	0	-
4.7(There shall be a double fold at the top seam and)	-	0	-
4.7(and then stitching shall be done through six layers.)	-	0	-
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	0	-
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	0	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	0	-
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	0	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	0	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	0	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	0	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	0	-
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	0	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	0	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	0	-
5/5.6 (UV Resistance, )	-	0	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	0	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	0	-
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	0	-
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	0	-
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	0	-
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	0	-
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	0	-
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	0	-
4.1(Raw Material )	-	0	-
4.2 (Fabric)	-	0	-
4.2 (Linear Density, 900 denier)	-	0	-
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	0	-
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	0	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	0	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
4.3(Sacks)	-	0	-
4.4(Seam )	-	0	-
4.4(Seam )	-	0	-
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	0	-
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	0	-
4.4(Seam The stitching shall be done with double fold over seam to)	-	0	-
4.4(to a depth of minimum 25 mm, so that so that)	-	0	-
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	0	-
4.4(The number of stitches/dm shall be 14 ± 2.)	-	0	-
4.4(Seam)	-	0	-
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	0	-
4.4(Seam)	-	0	-
4.4(Seam)	-	0	-
4.4(Seam)	-	0	-
4.5(Lamination )	-	0	-
4.5(Lamination )	-	0	-
4.5(Lamination )	-	0	-
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	0	-
4.7(Valve for Filling of Sacks)	-	0	-
4.7(There shall be a double fold at the top seam and)	-	0	-
4.7(and then stitching shall be done through six layers.)	-	0	-
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	0	-
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	0	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	0	-
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	0	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	0	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	0	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	0	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	0	-
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	0	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	0	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	0	-
5/5.6 (UV Resistance, )	-	0	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	0	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	0	-
Cl-5 Fig. 1- Table 1- Sr. no. ii(Ends per dm - Annex B 40 ± 2)	-	0	-
Cl-5 Fig. 1- Table 1-Sr. no. iii(Picks per dm-Annex B 40 ± 2)	-	0	-
Cl-5, Fig. 1- Table 1- Sr. no. i(Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm)	-	0	-
Cl-5, Fig. 1- Table 1- Sr. no. i(Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm)	-	0	-
Cl-5, Fig. 1- Table 1-Sr. no. i(Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm)	-	0	-
Cl-5, Fig. 1, Table 1(i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm)	-	0	-

-
included w.e.f 17.03.2026

1337

AANKAN CALIBRATION AND TESTING CENTRE LLP, DANTLI

7184406

IS 7834 : Part 2 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 2 Specific requirements for 45 degrees elbows

8000 View breakup
-

Clause No.	Exclusion	Remark
table 1 sl.no: 01(16 )	-	complete testing charge 8000
table 1 sl.no: 02(20 )	-	complete testing charge 8000
table 1 sl.no: 03(25 )	-	complete testing charge 8000
table 1 sl.no: 04(32 )	-	complete testing charge 8000
table 1 sl.no: 05(40 )	-	complete testing charge 8000
table 1 sl.no: 06(50 )	-	complete testing charge 8000
table 1 sl.no: 07(63 )	-	complete testing charge 8000
table 1 sl.no: 08(75 )	-	complete testing charge 8000
table 1 sl.no: 09(90 )	-	complete testing charge 8000
table 1 sl.no: 10(110 )	-	complete testing charge 8000
table 1 sl.no: 11(125 )	-	complete testing charge 8000
table 1 sl.no: 12(140 )	-	complete testing charge 8000
table 1 sl.no: 13(160 )	-	complete testing charge 8000
table 1 sl.no: 14( 180 )	-	complete testing charge 8000
table 1 sl.no: 15(200 )	-	complete testing charge 8000
table 1 sl.no: 16(225 )	-	complete testing charge 8000
table 1 sl.no: 17(250.0)	-	complete testing charge 8000
table 1 sl.no: 18(280.0)	-	complete testing charge 8000
table 1 sl.no: 19(315.0)	-	complete testing charge 8000
2.1(General)	-	complete testing charge 8000
2.2(Manufacture)	-	complete testing charge 8000
2.2.2, Table 1(Size)	-	complete testing charge 8000
2.2.2, Table 1(45 ̊ Elbow Laying Length)	-	complete testing charge 8000
2.2.3( inside diameter of the socket)	-	complete testing charge 8000
2.2.3(socket length)	-	complete testing charge 8000
2.1(General)	-	complete testing charge 8000
2.2(Manufacture)	-	complete testing charge 8000
2.2.2, Table 1(Size)	-	complete testing charge 8000
2.2.2, Table 1(45 ̊ Elbow Laying Length)	-	complete testing charge 8000
2.2.3( inside diameter of the socket)	-	complete testing charge 8000
2.2.3(socket length)	-	complete testing charge 8000
6.4 PART-1(Short term hydraulic test)	-	complete testing charge 8000
6.1.1(VCM Content Test)	-	complete testing charge 8000
2.2.2 table 1(Laying Length)	-	complete testing charge 8000
6.4 PART-1(Short term hydraulic test)	-	complete testing charge 8000
6.1.1(VCM Content Test)	-	complete testing charge 8000
2.2.2 table 1(Laying Length)	-	complete testing charge 8000
6.4 PART-1(Short term hydraulic test)	-	complete testing charge 8000
6.1.1(VCM Content Test)	-	complete testing charge 8000
2.2.2 table 1(Laying Length)	-	complete testing charge 8000
6.4 PART-1(Short term hydraulic test)	-	complete testing charge 8000
6.1.1(VCM Content Test)	-	complete testing charge 8000
2.2.2 table 1(Laying Length)	-	complete testing charge 8000
6.4 PART-1(Short term hydraulic test)	-	complete testing charge 8000
6.1.1(VCM Content Test)	-	complete testing charge 8000
2.2.2 table 1(Laying Length)	-	complete testing charge 8000
6.4 PART-1(Short term hydraulic test)	-	complete testing charge 8000
6.1.1(VCM Content Test)	-	complete testing charge 8000
2.2.2 table 1(Laying Length)	-	complete testing charge 8000

-
Included w.e.f 17.02.2026

1338

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 17399 (2020)

Textiles - Polypropylene ( PP )/ High Density Polyethylene ( HDPE ) Laminated Woven Sacks for Mail Sorting, Storage, Transport and Distribution - Specification

All

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(MANUFACTURE - Raw Materials)	-	0	-
5.2(MANUFACTURE - Fabric for PP tapes & for HDPE tapes)	-	0	-
5.2- Table 1- i)("REQUIREMENTS - Inside dimensions a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm")	-	30000	-
5.2- Table 1- ii)(REQUIREMENTS - Ends per dm)	-	30000	-
5.2- Table 1- iii)(REQUIREMENTS - Picks per dm)	-	30000	-
5.2- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g)	-	30000	-
5.2- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf) a) Lengthwise b) Widthwise)	-	30000	-
5.2- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min, N2), (kgf))	-	30000	-
5.2- Table 1- vii)("REQUIREMENTS - Elongation at break of fabric, percent: a) Lengthwise b) Widthwise")	-	30000	-
5.2- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks)	-	30000	-
5.3(Lamination)	-	0	-
5.4(Sack Fabrication)	-	30000	-
5.5(Capacity)	-	30000	-
6.1- Table 1- i)(REQUIREMENTS - Inside dimensions a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm)	-	30000	-
6.1- Table 1- ii)(REQUIREMENTS - Ends per dm)	-	30000	-
6.1- Table 1- iii)(REQUIREMENTS - Picks per dm)	-	30000	-
6.1- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g)	-	30000	-
6.1- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf))	-	30000	-
6.1- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min)	-	30000	-
6.1- Table 1- vii)(REQUIREMENTS - Elongation at break of fabric, percent a) Lengthwise b) Widthwise)	-	30000	-
6.1- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks)	-	30000	-
6.4(UV Resistance Test)	-	30000	-
7(PRINTING, PACKAGING AND MARKING)	-	0	-
8(ATMOSPHERIC CONDITIONS FOR SAMPLE CONDITIONING AND TESTING)	-	0	-
Clause 5.1(Raw Materials)	-	0	-
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	30000	-
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	30000	-
"Clause 5.2 Table 1(ii)"(Ends per dm)	-	30000	-
"Clause 5.2 Table 1(iii)"(Picks per dm)	-	30000	-
"Clause 5.2 Table 1(iv)"("Mass of laminated sack, g")	-	30000	-
"Clause 5.2 Table 1(v)"("Breaking strength of laminated fabric")	-	30000	-
"Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam)	-	30000	-
"Clause 5.2 Table 1(vii)"("Elongation at break of fabric, percent:")	-	30000	-
"Clause 5.2 Table 1(viii)"("Ash content, Max, percent")	-	30000	-
Clause 5.3(Lamination with a thin film of polypropylene)	-	0	-
Clause 5.4(Sack Fabrication)	-	0	-
Clause 7.3(Marking on Sacks)	-	0	-
Clause 5.1(Raw Materials)	-	0	-
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	30000	-
"Clause 5.2 Table 1(ii)"(Ends per dm)	-	30000	-
"Clause 5.2 Table 1(iii)"(Picks per dm)	-	30000	-
"Clause 5.2 Table 1(iv)"("Mass of laminated sack, g")	-	30000	-
"Clause 5.2 Table 1(v)"("Breaking strength of laminated fabric")	-	30000	-
"Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam)	-	30000	-
"Clause 5.2 Table 1(vii)"("Elongation at break of fabric, percent:")	-	30000	-
"Clause 5.2 Table 1(viii)"("Ash content, Max, percent")	-	30000	-
Clause 5.3(Lamination with a thin film of polypropylene)	-	0	-
Clause 7.3(Marking on Sacks)	-	0	-

-
included w.e.f 17.02.2026

1339

Arihant Analytical Laboratory Pvt. Ltd., Sonipat

9167906

IS 455 (2015)

Portland slag cement - Specification

All Type

8200.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 Table 1 v(Transverse strength (optional) IS 4031(Part 8) )	-	8200.00	-
7 Table 1 iv c(Compretsive Strenqth 672 ± 4 hr IS 4031(Part 6))	-	8200.00	-
7 Table 1 iv b(Compretsive Strenqth 168 ± 2 hr IS 4031(Part 6))	-	8200.00	-
7 Table 1 iv a(Compretsive Strenqth .72 ± 1 hr IS 4031(Part 6))	-	8200.00	-
7 Table 1 iii b(Setting Time ( by Vicat Apparatus ), Final IS 4031(Part 5))	-	8200.00	-
7 Table 1 iii a(Setting Time ( by Vicat Apparatus ),Initial IS 4031(Part 5))	-	8200.00	-
7 Table 1 ii b(Soundness, Autoclave expansion IS 4031(Part 3) )	-	8200.00	-
7 Table 1 ii a(Soundness, Le-Chate1ier expansion IS 4031(Part 3) )	-	8200.00	-
7 Table 1 i(Fineness IS 4031(Part 2))	-	8200.00	-
6 - Table - 1 vii( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	8200.00	-
6 - Table - 1 vi(Chloride content - Cl 4.13 of IS 4032:1985)	-	8200.00	-
6 - Table - 1 v(Loss on ignition - Cl 6.2 of IS 4032:1985)	-	8200.00	-
6 - Table - 1 iv(Sulphide sulphur (S) - Cl 6.12 of IS 4032:1985)	-	8200.00	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 6.11 of IS 4032:1985)	-	8200.00	-
6 - Table - 1 ii(Magnesia - Cl 6.8 of IS 4032:1985)	-	8200.00	-
6 - Table - 1 i(Insoluble residue - Cl 6.9 of IS 4032:1985)	-	8200.00	-
7 Table 1 v(Transverse strength (optional) IS 4031(Part 8) )	-	8200.00	-
7 Table 1 iv c(Compretsive Strenqth 672 ± 4 hr IS 4031(Part 6))	-	8200.00	-
7 Table 1 iv b(Compretsive Strenqth 168 ± 2 hr IS 4031(Part 6))	-	8200.00	-
7 Table 1 iv a(Compretsive Strenqth .72 ± 1 hr IS 4031(Part 6))	-	8200.00	-
7 Table 1 iii b(Setting Time ( by Vicat Apparatus ), Final IS 4031(Part 5))	-	8200.00	-
7 Table 1 iii a(Setting Time ( by Vicat Apparatus ),Initial IS 4031(Part 5))	-	8200.00	-
7 Table 1 ii b(Soundness, Autoclave expansion IS 4031(Part 3) )	-	8200.00	-
7 Table 1 ii a(Soundness, Le-Chate1ier expansion IS 4031(Part 3) )	-	8200.00	-
7 Table 1 i(Fineness IS 4031(Part 2))	-	8200.00	-
6 - Table - 1 vii( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	8200.00	-
6 - Table - 1 vi(Chloride content - Cl 4.13 of IS 4032:1985)	-	8200.00	-
6 - Table - 1 v(Loss on ignition - Cl 6.2 of IS 4032:1985)	-	8200.00	-
6 - Table - 1 iv(Sulphide sulphur (S) - Cl 6.12 of IS 4032:1985)	-	8200.00	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 6.11 of IS 4032:1985)	-	8200.00	-
6 - Table - 1 ii(Magnesia - Cl 6.8 of IS 4032:1985)	-	8200.00	-
6 - Table - 1 i(Insoluble residue - Cl 6.9 of IS 4032:1985)	-	8200.00	-
Cl. 7 Table-2(Cl. 7 Table-2 i (Fineness ))	-	8200.00	-
Cl. 7 Table-2(Cl. 7 Table-2 ii a (Expansion after aeration ))	-	8200.00	-
Cl. 7 Table-2(Cl. 7 Table-2 ii a (Soundness , Le Chatelier Expansion ))	-	8200.00	-
Cl. 7 Table-2(Cl. 7 Table-2 ii b (Expansion after aeration ))	-	8200.00	-
Cl. 7 Table-2(Cl. 7 Table-2 ii b (Soundness , Autoclave Expansion ))	-	8200.00	-
Cl. 7 Table-2(Cl. 7 Table-2 iii a (Setting time Initial))	-	8200.00	-
Cl. 7 Table-2(Cl. 7 Table-2 iii b (Setting time Final))	-	8200.00	-
Cl. 7 Table-2(Cl. 7 Table-2 iv a (Compressive Strength 72±1 hr IS))	-	8200.00	-
Cl. 7 Table-2(Cl. 7 Table-2 iv b (Compressive Strength 168±2 hr ))	-	8200.00	-
Cl. 7 Table-2(Cl. 7 Table-2 iv c (Compressive Strength 672±4 hr) )	-	8200.00	-
Cl. 7 Table-2(Cl. 7 Table-2 v (Transverse Strength (Optional) )	-	8200.00	-
11.3(Consistency(IS:4031(Pt-4)-1988)	-	8200.00	-

02 Jun, 2027

-
Included w.e.f. 02.03.2026

1340

LPG Equipment Research Centre (LERC), Bengaluru

6141034

IS 14612 (1999)

Commercial burners using LPG at inlet pressure up to 147.1 k - N/m2 (1500 Gf/cm2) - Specification

Auto LPG Cylinder

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.1,12,2,12,3(Marking)	-	0	-
10.1.5(Inner surface in tension)	-	0	-
10.1.5(Outer surface in tension)	-	0	-
10.1.6(Macroscopic Examination On Circumferential Weld )	-	0	-
10.1.6.1(Macroscopic Examination, m1,Through valve boss )	-	0	-
10.1.8(Water Capacity)	-	0	-
10.2.1(Hydrostatic stretch test)	-	0	-
10.1.6.1(Macroscopic Examination, m2,Through valve plate welds)	-	0	-
10.2.2(Burst test)	-	0	-
10.2.3.2(Change in volume,)	-	0	-
10.2.3.3(shall not cause any fragmentation )	-	0	-
10.3(Hydrostatic Test,3 MPa for 60 seconds )	-	0	-
10.4(Pneumatic Leakage Test,2 MPa for 1 minute)	-	0	-
10.6.1(Bonfire Test )	-	0	-
10.6.2(Fatigue Test)	-	0	-
10.6.3(Crash Test)	-	0	-
10.6.4(Strength Assessment)	-	0	-
11(Surface coating and colour)	-	0	-
12.1,12,2,12,3(Marking)	-	0	-
10.1(Inner surface in tension)	-	0	-
10.1(Outer surface in tension)	-	0	-
10.1(Macroscopic Examination)	-	0	-
10.1(On Circumferential Weld )	-	0	-
10.1(On longitudinal Weld)	-	0	-
10.1(m1,Through valve boss )	-	0	-
10.1(m2,Through valve plate welds)	-	0	-
10.1.7(Water Capacity)	-	0	-
10.2(Hydrostatic stretch test)	-	0	-
10.2(Burst test)	-	0	-
10.3(Hydrostatic Test,3 MPa for 60 seconds )	-	0	-
10.4(Pneumatic Leakage Test,2 MPa for 1 minute)	-	0	-
10.6(Type tests)	-	0	-
10.6(Type tests)	-	0	-
10.6(Type tests)	-	0	-
10.6(Type tests)	-	0	-
11(Surface coating and colour)	-	0	-
10.1.6(Macroscopic Examination On longitudinal Weld)	-	0	-
4(Types of Burner)	-	0	-
Section 1(Construction)	-	0	-
5(General )	-	0	-
5.1(The construction of all the parts of the burners shall be sound and of high standard of orkmanship and appropriate finish. The construction shall ensure durability and shall comply with the safety requirements.)	-	0	-
5.2(Rivets, fastening screws, plugs, etc, shall not lead into gas passages, except where adequate provision has been made to ensure permanent gas-tight joints.)	-	0	-
5.3(No pressure regulator shall be included as a part of the burner.)	-	0	-
6(Materials)	-	0	-
6.1( The material used in the construction of the burner or parts of the burner shall be resistant to wear and deterioration occuring in the normal use)	-	0	-
6.2(All copper and copper alloy parts shall pass the mercurous nitrate test (season cracking test) when tested according to the method specified in IS 2305)	-	0	-
6.3(Non-metallic materials normally in contact with the gas shall not change in weight or volume by more than 15 percent after being immersed in pentane or LP gas for 72 h at room temperature, when tested according to Annex A)	-	0	-
6.4(The main body of the burner (including mixer head, mixing tube and burner head) shall be of substantial and durable construction. Metals having a melting point below 510 OC shall not be considered acceptable.)	-	0	-
7(Design for maintenance)	-	0	-
7.1(i) Every part of the burner shall be of such construction as to be secured against displacement, distortion, warping or other damage and shall be supported to maintain a fixed relationship and reasonable conditions of handling and use so as to ensure continued compliance with these requirements. Such parts not permanently secured shall be designed so that they cannot be incorrectly assembled and cannot be improperly located or misaligned in removing or replacing during cleaning or other servicing.)	-	0	-
7.2(Burners and parts of the burners of same type, make, model and rating shah be interchangeable or replaceable without affecting performance.)	-	0	-
7.3(The parts of the burner shall not become disconnected during operation.)	-	0	-
8(Stability: The burner shall be so designed that it remains stable and shall not be easily overturned.)	-	500	-
9(Workmanship and Finish)	-	0	-
9.1(The finish of exposed parts shall be durable, easy to clean and not subject to excessive deterioration in normal use. Parts which come in contact with foodstuffs shall be capable of being hygienically cleaned. The finish shall, on visual examination, show no defects, such as pinholes, blisters, roughness and exposed areas of metal, which might give rise to unduly rapid deterioration in the use. The surface shall also be free from burrs and sharp edges, which might cause injury to the user with normal operation.)	-	0	-
9.2(Except for burners, all other parts, namely springs, screws, nuts and bolts, pipes, pins, etc, which can be removed for maintenance shall be of corrosion resistant material or treated to resist corrosion appropriate to the conditions of use.)	-	0	-
10(Injector Jets)	-	0	-
10.1(The injector jet shall be fixed calibrated type. A jet plate having multiple jets shall also be permitted.)	-	0	-
10.2(Jet plate holder shall be forged from wrought or extruded brass sections (see IS 6912).)	-	0	-
10.3(The total flow through the jet(s) to the burner at 34.323 kN/m’ (0.35 kgf/cm*) in kg/h of LPG shall be declared by the manufacturer.)	-	0	-
11.1( BURNERS: The construction of the burners and the assembly shall allow their dismantling from the supports easily with or without the use of tools)	-	0	-
11.2(The burner supports shall be rigid and shall be fixed in their place. Their construction shah ensure the stsbility of the burners and shall prevent their undue movement in a horizontal plane.)	-	0	-
11.3(The tightness of the joint from jet/jet plate to burner head in the burner assembly shall not depend upon adhesives or any kind of packing.)	-	0	-
11.4(If primary air regulators are used, they shall be so designed that they are not easily maladjusted by the user and the construction shall be such that primary air adjustment can be made with the burner in place)	-	0	-
11.5(The burner or the appliances manufactured using these burners shah have a provision to protect from cooking vessels resting directly on burner top and smothering the centre flame.)	-	0	-
12(Gas Soundness: The burner assembly from inlet to jet shah be checked at a pneumatic pressure of minimum 686 kPa (7 kgf/cm2) for leakage.)	-	1000	-
13(GAS INLET CONNECTIONS: The inlet to the burner shall be provided with an adaptor machined from extruded brass bar conforming to IS 319. The adaptor shall have threaded inlet configuration to suit the end connection of burner)	-	0	-
14(AIR ADJUSTER: Air adjuster may be provided so that the burner works satisfactorily within the pressure range offered)	-	0	-
15(General conditions of test)	-	0	-
15.1(During the tests the initial adjustment of burner shall not be altered unless specifically required in the test procedure. The burner shall be adjusted and operated in accordance with the instructions given or issued with the burner. Before any tests are made the burner shall be operated at its full working temperature for a sufficient period to remove any temporary protective coating, which might interfere with observations. The gas connections and system up to and including the burners shall be examined for leaks before and after test. The performance test results shall not be valid unless the system is sound. The burner shall be at room temperature at the start of each test unless otherwise stated.)	-	0	-
15.2(The room in which tests are conducted shall be test. The gas/air pressure shall be measured correct to one percent of the normal pressure rating of the burner. adequately ventilated but free from perceptible draughts. The gas/air shall be supplied to the burner through a control valve, an adjustable pressure regulator. A flow meter with a pressure gauge on its inlet shall also be included for gas consumption)	-	0	-
15.3(Except where otherwise stated, the burner shall satisfy the performance requirements using LPG.)	-	0	-
16(Gas Consumption:)	-	1000	-
16.2(The flow through the injector jet(s) at the normal pressure rating of the burner shall be measured with a gas flow meter using compressed air (free from oiY impurities) at room temperature and pressure. This value shall be converted to flow rate at 27 Oc and 760 mm of Hg. Thereafter using 0.75 as multiplying factor, the value of air flow shall be converted to flow of LPG at 27 OC and 760 mm of Hg.)	-	0	-
17(Ignition and Flame Travel: Burner flames shall carry across to all ports on the same burner under normal working condition from full gas rate to 75 percent of full gas rate at inlet pressure from 80 to 120 percent of the rated inlet pressure.)	-	500	-
18(Flame Stability: It shall be possible to operate the burner at full gas rate to 75 percent of full gas rate at gas inlet pressure from 80 to 120 percent of the rated inlet pressure without the flame either extinguishing, blowing off or flashing back and without the formation of soot)	-	500	-
19(Flash Black: A vessel large enough to cover the pan supports filled with water shall be placed on the burner under test. The burner flame shall be ignited while the inlet pressure is maintained at 80 percent of the rated pressure. Water may be added, if required to maintain the level. Gas rate recommended by the manufacturer shall be maintained for half an hour after which the gas input shall be reduced to 75 percent of the full gas rate and then brought back to the full gas rate. The operation shall be repeated five times. No flash back shall occur during the test.)	-	500	-
20(Formation of Soot: A vessel large enough to cover the pan supports shall be filled with water up to a height of 50 mm and placed on the burner under test. The burner shall be ignited with the gas flow maintained at the full gas rate. Water may be added, if required to maintain the level. After one hour, no soot (unburnt carbon) shall have been deposited on the bottom of the vessel. This shall apply for inlet pressures of 80 and 120 percent of the rated inlet pressure)	-	500	-
21(Resistance to draught: There shall be no extinction of the flame of the burner 120 percent of the rated inlet pressure. at rated gas consumption when the burner is placed in a normal (not local&d) current of air with a velocity of 2 m/s, as measured with a rotating vane anemometer. The location of the burner relative to neighbouring walls and the direction of the draught shall be varied to correspond to likely conditions of burner installation. This shall apply for all inlet pressures of 80, 100 and)	-	500	-
22(Combustion: On no account the carbon monoxide/carbon dioxide ratio of exhaust gases, of burner operating at any consumption at which the flame is stable at gas inlet pressure up to 147.1 kN/m2 (1500 gf/cm2) shall exceed 0.02. The carbon monoxide and carbon dioxide contents of the products of combustion shall be determined by the methods capable of accuracy of 0.001 percent and 0.5 percent, respectively of the volume of the sample.)	-	5000	-
23(Thermal Efficiency, Percent)	-	5000	-
24(Marking: Each burner shall be legibly and clearly marked with the following: a) Manufacturer’s name, initials or registered trade-mark; b)Rated pressure in kN/m2 (gf/cm2); c)Rated gas consumption in g/h at rated pressure; d)Batch No; e)The words ‘for use with LPG’; and f)Declared thermal efficiency, if it is higher than specified in 23.1. )	-	0	-
4(Types of Burner)	-	0	-
Section 1(Construction)	-	0	-
5(General )	-	0	-
5.1(The construction of all the parts of the burners shall be sound and of high standard of orkmanship and appropriate finish. The construction shall ensure durability and shall comply with the safety requirements.)	-	0	-
5.2(Rivets, fastening screws, plugs, etc, shall not lead into gas passages, except where adequate provision has been made to ensure permanent gas-tight joints.)	-	0	-
5.3(No pressure regulator shall be included as a part of the burner.)	-	0	-
6(Materials)	-	0	-
6.1( The material used in the construction of the burner or parts of the burner shall be resistant to wear and deterioration occuring in the normal use)	-	0	-
6.2(All copper and copper alloy parts shall pass the mercurous nitrate test (season cracking test) when tested according to the method specified in IS 2305)	-	0	-
6.3(Non-metallic materials normally in contact with the gas shall not change in weight or volume by more than 15 percent after being immersed in pentane or LP gas for 72 h at room temperature, when tested according to Annex A)	-	0	-
6.4(The main body of the burner (including mixer head, mixing tube and burner head) shall be of substantial and durable construction. Metals having a melting point below 510 OC shall not be considered acceptable.)	-	0	-
7(Design for maintenance)	-	0	-
7.1(i) Every part of the burner shall be of such construction as to be secured against displacement, distortion, warping or other damage and shall be supported to maintain a fixed relationship and reasonable conditions of handling and use so as to ensure continued compliance with these requirements. Such parts not permanently secured shall be designed so that they cannot be incorrectly assembled and cannot be improperly located or misaligned in removing or replacing during cleaning or other servicing.)	-	0	-
7.2(Burners and parts of the burners of same type, make, model and rating shah be interchangeable or replaceable without affecting performance.)	-	0	-
7.3(The parts of the burner shall not become disconnected during operation.)	-	0	-
8(Stability: The burner shall be so designed that it remains stable and shall not be easily overturned.)	-	0	-
9(Workmanship and Finish)	-	0	-
9.1(The finish of exposed parts shall be durable, easy to clean and not subject to excessive deterioration in normal use. Parts which come in contact with foodstuffs shall be capable of being hygienically cleaned. The finish shall, on visual examination, show no defects, such as pinholes, blisters, roughness and exposed areas of metal, which might give rise to unduly rapid deterioration in the use. The surface shall also be free from burrs and sharp edges, which might cause injury to the user with normal operation.)	-	0	-
9.2(Except for burners, all other parts, namely springs, screws, nuts and bolts, pipes, pins, etc, which can be removed for maintenance shall be of corrosion resistant material or treated to resist corrosion appropriate to the conditions of use.)	-	0	-
10(Injector Jets)	-	0	-
10.1(The injector jet shall be fixed calibrated type. A jet plate having multiple jets shall also be permitted.)	-	0	-
10.2(Jet plate holder shall be forged from wrought or extruded brass sections (see IS 6912).)	-	0	-
10.3(The total flow through the jet(s) to the burner at 34.323 kN/m’ (0.35 kgf/cm*) in kg/h of LPG shall be declared by the manufacturer.)	-	0	-
11.1( BURNERS: The construction of the burners and the assembly shall allow their dismantling from the supports easily with or without the use of tools)	-	0	-
11.2(The burner supports shall be rigid and shall be fixed in their place. Their construction shah ensure the stsbility of the burners and shall prevent their undue movement in a horizontal plane.)	-	0	-
11.3(The tightness of the joint from jet/jet plate to burner head in the burner assembly shall not depend upon adhesives or any kind of packing.)	-	0	-
11.4(If primary air regulators are used, they shall be so designed that they are not easily maladjusted by the user and the construction shall be such that primary air adjustment can be made with the burner in place)	-	0	-
11.5(The burner or the appliances manufactured using these burners shah have a provision to protect from cooking vessels resting directly on burner top and smothering the centre flame.)	-	0	-
12(Gas Soundness: The burner assembly from inlet to jet shah be checked at a pneumatic pressure of minimum 686 kPa (7 kgf/cm2) for leakage.)	-	0	-
13(GAS INLET CONNECTIONS: The inlet to the burner shall be provided with an adaptor machined from extruded brass bar conforming to IS 319. The adaptor shall have threaded inlet configuration to suit the end connection of burner)	-	0	-
14(AIR ADJUSTER: Air adjuster may be provided so that the burner works satisfactorily within the pressure range offered)	-	0	-
Section 2(Performance )	-	0	-
15(General conditions of test)	-	0	-
15.1(During the tests the initial adjustment of burner shall not be altered unless specifically required in the test procedure. The burner shall be adjusted and operated in accordance with the instructions given or issued with the burner. Before any tests are made the burner shall be operated at its full working temperature for a sufficient period to remove any temporary protective coating, which might interfere with observations. The gas connections and system up to and including the burners shall be examined for leaks before and after test. The performance test results shall not be valid unless the system is sound. The burner shall be at room temperature at the start of each test unless otherwise stated.)	-	0	-
15.2(The room in which tests are conducted shall be test. The gas/air pressure shall be measured correct to one percent of the normal pressure rating of the burner. adequately ventilated but free from perceptible draughts. The gas/air shall be supplied to the burner through a control valve, an adjustable pressure regulator. A flow meter with a pressure gauge on its inlet shall also be included for gas consumption)	-	0	-
15.3(Except where otherwise stated, the burner shall satisfy the performance requirements using LPG.)	-	0	-
16(Gas Consumption:)	-	0	-
16.1(Burner shall permit a gas flow within +lO percent of the manufacturer’s declared gas consumption in kg/ h when tested according to 16.)	-	0	-
16.2(The flow through the injector jet(s) at the normal pressure rating of the burner shall be measured with a gas flow meter using compressed air (free from oiY impurities) at room temperature and pressure. This value shall be converted to flow rate at 27 Oc and 760 mm of Hg. Thereafter using 0.75 as multiplying factor, the value of air flow shall be converted to flow of LPG at 27 OC and 760 mm of Hg.)	-	0	-
17(Ignition and Flame Travel: Burner flames shall carry across to all ports on the same burner under normal working condition from full gas rate to 75 percent of full gas rate at inlet pressure from 80 to 120 percent of the rated inlet pressure.)	-	0	-
18(Flame Stability: It shall be possible to operate the burner at full gas rate to 75 percent of full gas rate at gas inlet pressure from 80 to 120 percent of the rated inlet pressure without the flame either extinguishing, blowing off or flashing back and without the formation of soot)	-	0	-
19(Flash Black: A vessel large enough to cover the pan supports filled with water shall be placed on the burner under test. The burner flame shall be ignited while the inlet pressure is maintained at 80 percent of the rated pressure. Water may be added, if required to maintain the level. Gas rate recommended by the manufacturer shall be maintained for half an hour after which the gas input shall be reduced to 75 percent of the full gas rate and then brought back to the full gas rate. The operation shall be repeated five times. No flash back shall occur during the test.)	-	0	-
20(Formation of Soot: A vessel large enough to cover the pan supports shall be filled with water up to a height of 50 mm and placed on the burner under test. The burner shall be ignited with the gas flow maintained at the full gas rate. Water may be added, if required to maintain the level. After one hour, no soot (unburnt carbon) shall have been deposited on the bottom of the vessel. This shall apply for inlet pressures of 80 and 120 percent of the rated inlet pressure)	-	0	-
21(Resistance to draught: There shall be no extinction of the flame of the burner 120 percent of the rated inlet pressure. at rated gas consumption when the burner is placed in a normal (not local&d) current of air with a velocity of 2 m/s, as measured with a rotating vane anemometer. The location of the burner relative to neighbouring walls and the direction of the draught shall be varied to correspond to likely conditions of burner installation. This shall apply for all inlet pressures of 80, 100 and)	-	0	-
22(Combustion: On no account the carbon monoxide/carbon dioxide ratio of exhaust gases, of burner operating at any consumption at which the flame is stable at gas inlet pressure up to 147.1 kN/m2 (1500 gf/cm2) shall exceed 0.02. The carbon monoxide and carbon dioxide contents of the products of combustion shall be determined by the methods capable of accuracy of 0.001 percent and 0.5 percent, respectively of the volume of the sample.)	-	0	-
23(Thermal Efficiency, Percent)	-	0	-
Section 3(General)	-	0	-
24(Marking: Each burner shall be legibly and clearly marked with the following: a) Manufacturer’s name, initials or registered trade-mark; b)Rated pressure in kN/m2 (gf/cm2); c)Rated gas consumption in g/h at rated pressure; d)Batch No; e)The words ‘for use with LPG’; and f)Declared thermal efficiency, if it is higher than specified in 23.1. )	-	0	-
16.1(Burner shall permit a gas flow within +lO percent of the manufacturer’s declared gas consumption in kg/ h when tested according to 16.)	-	0	-

-
Included w.e.f. 22.01.2026

1341

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 16709 (2017)

Textiles - Polypropylene (PP) woven, laminated, block bottom valve sacks for packaging of 50 kg cement - Specification

ALL

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(Sack Length)	-	30000	-
4.1.2(Sack Width)	-	30000	-
4.1.3(Top Closure Width and Bottom Closure Width)	-	30000	-
4.1.4(Patch Length)	-	30000	-
4.1.5(Patch Height)	-	30000	-
4.1.6(Length of Valve)	-	30000	-
4.1.7(Width of Valve Sleeve)	-	30000	-
4.1.8(Length of Valve Sleeve)	-	30000	-
5.1(Raw Material)	-	0	-
5.2(Fabric)	-	0	-
5.2(Tape density and width)	-	30000	-
5.4(Lamination for PP)	-	0	-
5.4(Lamination for LDPE)	-	0	-
6.1(Mass of Bale)	-	30000	-
6.2.1(Breaking Strength and Elongation at Break of Fabric)	-	30000	-
6.2.2(Weld Strength of Top and Bottom Closures)	-	30000	-
6.3(Drop Impact Testing of Filled Sacks)	-	30000	-
6.4(Ash Content)	-	30000	-
8(Atomspheric Conditions for Conditioning and Testing)	-	30000	-
Cl-5.6(Capacity)	-	30000	-
Cl-6.6, Table-1 (iii)(Picks per dm)	-	30000	-
Cl.6.6, Table-1 (vii)(Elongation at break of fabric)	-	30000	-
Cl- 6.6, Table.-1 (ii)(Ends per dm)	-	30000	-
4.1.1(Sack Length)	-	0	-
4.1.2(Sack Width)	-	0	-
4.1.3(Top Closure Width and Bottom Closure Width)	-	0	-
4.1.4(Patch Length)	-	0	-
4.1.5(Patch Height)	-	0	-
4.1.6(Length of Valve)	-	0	-
4.1.7(Width of Valve Sleeve)	-	0	-
4.1.8(Length of Valve Sleeve)	-	0	-
5.1(Raw Material)	-	0	-
5.2(Fabric)	-	0	-
5.2(Tape density and width)	-	0	-
5.4(Lamination for PP)	-	0	-
5.4(Lamination for LDPE)	-	0	-
6.1(Mass of Bale)	-	0	-
6.2.1(Breaking Strength and Elongation at Break of Fabric)	-	0	-
6.2.2(Weld Strength of Top and Bottom Closures)	-	0	-
6.3(Drop Impact Testing of Filled Sacks)	-	0	-
6.4(Ash Content)	-	0	-
8(Atomspheric Conditions for Conditioning and Testing)	-	0	-
Cl-5.6(Capacity)	-	0	-
Cl-6.6, Table-1 (iii)(Picks per dm)	-	0	-
Cl.6.6, Table-1 (vii)(Elongation at break of fabric)	-	0	-
Cl- 6.6, Table.-1 (ii)(Ends per dm)	-	0	-

-
1 6.5 (Air Permeability) Air Permeability Exclusion is respectfully requested, considering that inclusion approval has been granted to other laboratories with exemption from the Air Permeability Test requirement under Clause 6.5.

1342

Urja Metallurgical Services LLP

7194806

IS 1364 : Part 1 (2023)

Hexagon head bolts, screws, and nuts of property grades A and B: Part 1 Hexagon head bolts (Size range M1.6 to M64) (sixth revision)

All Grade / Type / Size / Designation / Class

10300 View breakup
-

Clause No.	Exclusion	Remark
Cl-4(Dimensions)	-	-
Cl-5, Table-7(General requirements)	-	-
Cl-5, Table-7(Thread-Tolerance class)	-	-
Cl-5, Table-7(Mechanical properties- Steel)	-	-
Cl-5, Table-7(Mechanical properties-Stainless steel)	-	-
Cl-5, Table-7(Tolerances-Product grade)	-	-
Cl-5, Table-7(Surface condition -Electroplated coatings)	-	-
Cl-5, Table-7(Surface condition- Non-electrolytically applied zinc flake)	-	-
Cl-5, Table-7(Surface condition - Hot dip galvanized coatings)	-	-
Cl-5, Table-7(Surface integrity- Limits for surface discontinuities)	-	-
Cl-6(Marking)	-	-

23 Dec, 2028

-
Included w.e.f 27.01.2026

1343

Akshat Test Lab & Calibration Services, Ghaziabad

8186526

IS 302 : Part 2 : Sec 13 (2024)

Household and Similar Electrical Appliances âSafety Part 2 Particular Requirements Section 13 Deep Fat Fryers, Frying Pans and Similar Appliances (First Revision)

19500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	1000	For BIS complete test - Rs. 19500/- only.
8(Protection against access to live parts)	-	1000	For BIS complete test - Rs. 19500/- only.
10(Power input and current)	-	1000	For BIS complete test - Rs. 19500/- only.
11(Heating)	-	1500	For BIS complete test - Rs. 19500/- only.
13.1 &13.2(Leakage current test)	-	1500	For BIS complete test - Rs. 19500/- only.
13.1 &13.3(Electric strength test)	-	1500	For BIS complete test - Rs. 19500/- only.
14(Transient overvoltages)	-	1000	For BIS complete test - Rs. 19500/- only.
15(Moisture resistance)	-	1500	For BIS complete test - Rs. 19500/- only.
15.3(Moisture resistance)	-	1500	For BIS complete test - Rs. 19500/- only.
15.101(Moisture resistance)	-	1000	For BIS complete test - Rs. 19500/- only.
16.1 &16.2(Leakage current test)	-	1500	For BIS complete test - Rs. 19500/- only.
16.1 & 16.3(Electric strength test)	-	1500	For BIS complete test - Rs. 19500/- only.
17(Overload protection of transformers and associated circuits)	-	1500	For BIS complete test - Rs. 19500/- only.
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	1500	For BIS complete test - Rs. 19500/- only.
19.101 to to 19.102(Abnormal operation)	-	1500	For BIS complete test - Rs. 19500/- only.
20(Stability and mechanical hazards)	-	1000	For BIS complete test - Rs. 19500/- only.
21(Mechanical strength)	-	1000	For BIS complete test - Rs. 19500/- only.
22(Construction)	-	2000	For BIS complete test - Rs. 19500/- only.
22.101(Construction)	-	1000	For BIS complete test - Rs. 19500/- only.
23(Internal wiring)	-	1500	For BIS complete test - Rs. 19500/- only.
24(Components)	-	1500	For BIS complete test - Rs. 19500/- only.
25("Supply connection and external flexible cords")	-	1500	For BIS complete test - Rs. 19500/- only.
26("Terminals for external conductors")	-	1000	For BIS complete test - Rs. 19500/- only.
27(Provision for earthing)	-	2000	For BIS complete test - Rs. 19500/- only.
28(Screws and connections)	-	1000	For BIS complete test - Rs. 19500/- only.
29("Clearances, creepage distances and solid insulation")	-	1000	For BIS complete test - Rs. 19500/- only.
30(Resistance to heat and fire)	-	2000	For BIS complete test - Rs. 19500/- only.
31(Resistance to rusting)	-	1000	For BIS complete test - Rs. 19500/- only.

-
Included w.e.f 24.03.2026 Exclusion: Cl 19.11.4.1-19.11.4.7(EMI/EMC), 32 (Radiation, toxicity and similar hazards)

1344

IEC TEST LABS LLP

8165726

IS 9968 : Part 1 (2025)

Elastomer Insulated Cables - Specification Part 1 for Working Voltages up to and including 1100 volts (Second Revision)

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Copper Conductor)	-	1000	-
Cl-4.2(Aluminum Conductor)	-	1000	-
Cl-6.1(Proofed Tape)	-	1000	-
Cl-6.2("Polyethylene Terephthalate (PETP) Tape or Plastic Tape or Any Other Suitable Tape")	-	1000	-
Cl-6.3(Glass Tape)	-	1000	-
Cl-7(Fillers)	-	1000	-
Cl-8.1(Textile Braid)	-	1000	-
Cl-8.2(Glass Braid)	-	1000	-
Cl-9.1(General Service Insulated Cables and Flexible Cords)	-	1000	-
Cl-9.2(Heat Resisting Insulated Cables)	-	1000	-
Cl-9.3(Silicon Rubber Insulated Cable)	-	1000	-
Cl-10.1(Preservative Compound)	-	1000	-
Cl-10.2(Varnish)	-	1000	-
Cl-12(separator tape)	-	1000	-
Cl-14(Core Identification)	-	1000	-
Cl-18(Laying UP of Cores)	-	1000	-
Cl-19(Binder Tape)	-	1000	-
Cl-20.2(Thickness of Sheath)	-	1000	-
Cl-20.3(Tolerance on Thickness of Sheath)	-	1000	-
Cl-20.4(Colour)	-	1000	-
Cl-22.1 (i) (a)(Conductor resistance test)	-	1000	-
Cl-22.1 (i) (b)(High voltage test or spark test.)	-	2000	-
Cl-22.1 (ii) (a)(Annealing test (for copper);)	-	1000	-
Cl-22.1 (ii) (b)(Tensile Test ((for aluminium);)	-	1000	-
Cl-22.1 (ii) (c)(Wrapping test (for aluminium);)	-	1000	-
Cl-22.1 (ii) (f)(Tensile strength and elongation at break of insulation and sheath)	-	1000	-
Cl-22.1 (ii) (g)(Hot set test for insulation and sheath)	-	2000	-
Cl-22.1 (ii) (h)(High voltage test)	-	2000	-
Cl-22.1 (ii) (i)(Insulation resistance test)	-	2000	-
Cl-22.1 (iii) (a)(Persulphate test (for tinned copper);)	-	2000	-
Cl-22.1 (iii) (f)(Test for thickness of insulation and sheath and overall diameter)	-	1000	-
Electrical(Tensile strength and elongation at break)	-	1000	-
Cl-22.1 (iii) (g), 2(Ageing in air oven)	-	5000	-
Cl-22.1 (iii) (g), 3(Ageing in air bomb)	-	5000	-
Cl-22.1 (iii) (g), 4(Ageing In oxygen bomb)	-	5000	-
Cl-22.1 (iii) (g), 5(Hot set)	-	2000	-
Cl-22.1 (iii) (g), 6(Oil resistance;)	-	2000	-
Cl-22.1 (iii) (g), 7(Tear resistance)	-	2000	-
Cl-22.1 (iii) (i)(High voltage (water immersion) test;)	-	2000	-
Cl-22.1 (iii) (j)(Flammability test)	-	1000	-
Cl-22.1 (iii) (k)(Water absorption test (for insulation as applicable))	-	5000	-
Cl-24.1(Manufacturer’s Identification)	-	1000	-
Cl-25(Packing and Morning)	-	1000	-

07 Sep, 2026

-
included w.e.f 09.02.2026

1345

MORBI TEST HOUSE LLP

7195306

IS 2202 : Part 1 (2023)

WOODEN FLUSH DOOR SHUTTERS SOLID CORE TYPE SPECIFICATION PART 1 PLYWOOD FACE PANELS Seventh Revision

All Grade / Type / Size / Designation

21500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.1(Workmanship & Finish)	-	200	-
9.2(Workmanship & Finish)	-	200	-
9.3(Workmanship & Finish)	-	200	-
11.1(Dimensions - Height)	-	1000	-
11.1(Dimensions - Width)	-	1000	-
11.1(Dimensions - Thickness)	-	1000	-
11.1(Dimensions - Variation in thickness)	-	1000	-
11.1(Dimensions - Squareness)	-	1000	-
11.12(End immersion test)	-	1500	-
11.13(Knife Test)	-	500	-
11.14(Glue Adhesion Test)	-	1000	-
4(GRADE)	-	200	-
4(TYPE)	-	200	-
5(SIZES)	-	200	-
7.1.1(CONSTRUCTION-Blockboard Core)	-	1000	-
7.1.1(CONSTRUCTION-Blockboard Core)	-	1000	-
7.1.2(CONSTRUCTION-Blockboard Core)	-	1000	-
7.3.2(CONSTRUCTION-Stiles and Rails)	-	1000	-
7.3.2(a)(CONSTRUCTION-Stiles and Rails-Joints)	-	1000	-
7.3.2(b)(CONSTRUCTION-Stiles and Rails-Joints)	-	1000	-
7.3.2(c)(CONSTRUCTION-Stiles and Rails-Joints)	-	1000	-
7.3.3(CONSTRUCTION-Stiles and Rails)	-	1000	-
9.1(WORKMANSHIP AND FINISH)	-	200	-
9.2(WORKMANSHIP AND FINISH)	-	200	-
9.3(WORKMANSHIP AND FINISH)	-	200	-
11.1(Dimensions and Squareness Test)	-	1000	-
11.1(Dimensions and Squareness Test)	-	1000	-
11.1(Dimensions and Squareness Test)	-	1000	-
11.1(Dimensions and Squareness Test)	-	1000	-
11.1(Dimensions and Squareness Test)	-	1000	-
11.2(General Flatness Test)	-	1000	-
11.2(General Flatness Test)	-	1000	-
11.2(General Flatness Test)	-	1000	-
11.3(Local Planeness Test)	-	1000	-
11.4(Impact Indentation Test)	-	1500	-
11.4(Impact Indentation Test)	-	1500	-
11.5(Flexure Test)	-	1000	-
11.5(Flexure Test)	-	1000	-
11.6(Edge Loading Test)	-	2000	-
11.6(Edge Loading Test)	-	2000	-
11.6(Edge Loading Test)	-	2000	-
11.6(Edge Loading Test)	-	2000	-
11.7.1(Shock Resistance Test)	-	1500	-
11.7.2(Shock Resistance Test)	-	1500	-
11.8(Buckling Test)	-	1000	-
11.8(Buckling Test)	-	1000	-
11.8(Buckling Test)	-	1000	-
11.9.2(Slamming Test)	-	1000	-
11.9.3(Slamming Test)	-	1000	-
11.10(Misuse Test)	-	1500	-
11.11(Varying Humidity Test)	-	2500	-
11.11(Varying Humidity Test)	-	2500	-
11.12(End Immersion Test)	-	1500	-
11.13(Knife Test)	-	500	-
11.14(Glue Adhesion Test)	-	1000	-
11.15(Screw Withdrawal Resistance Test)	-	2000	-
11.15(Screw Withdrawal Resistance Test)	-	2000	-
Clause 4.2(grades specified)	-	200	-
Clause 5(SIZES)	-	200	-
Clause 6.1.1(species of timber)	-	200	-
Clause 6.1.2(list of species)	-	0	-
Clause 6.1.3(moisture content)	-	200	-
Clause 6.2.1(Plywood)	-	4000	-
Clause 6.2.2(Decorative plywood)	-	4000	-
Clause 6.3(Cross-Bands)	-	1000	-
Clause 6.4.1(Commercial Face Veneers)	-	1000	-
Clause 6.4.2(Decorative Face Veneers)	-	1000	-
Clause 6.6.1(Adhesives)	-	4000	-
Clause 6.7(Particle Board)	-	1000	-
Clause 6.8(Medium density fibre board)	-	1000	-
Clause 6.9(Alternative Materials)	-	1000	-
Clause 7.1(Blockboard Core)	-	1000	-
Clause 7.2(Particle Board or Medium Density Fibre)	-	1000	-
Clause 7.3(Stiles and Rails)	-	1000	-
Clause 7.4(Levelling)	-	1000	-
Clause 7.5(Face Panel)	-	1000	-
Clause 7.6(Lipping)	-	1000	-
Clause 7.7(Rebating)	-	1000	-
Clause 7.8(Opening for Glazing)	-	1000	-
Clause 7.9(Venetian)	-	1000	-
Clause 8.1(Locks)	-	1000	-
Clause 9(WORKMANSHIP AND FINISH)	-	200	-
Clause 10.1(Classification of Tests)	-	200	-
Clause 11.1(Dimensions and Squareness Test)	-	1000	-
Clause 11.2(General Flatness Test)	-	1000	-
Clause 11.3(Local Planeness Test)	-	1000	-
Clause 11.4(Impact Indentation Test)	-	1500	-
Clause 11.5(Flexure Test)	-	1000	-
Clause 11.6(Edge Loading Test)	-	2000	-
Clause 11.7(Shock Resistance Test)	-	1500	-
Clause 11.8(Buckling Resistance Test)	-	1000	-
Clause 11.9(Slamming Test)	-	1000	-
Clause 11.10(Misuse Test)	-	1500	-
Clause 11.11(Varying Humidity Test)	-	2500	-
Clause 11.12(End Immersion Test)	-	1500	-
Clause 11.13(Knife Test)	-	500	-
Clause 11.14(Glue Adhesion Test)	-	1000	-
Clause 11.15(Screw Withdrawal Resistance Test)	-	2000	-
Clause 12(SAMPLING AND CRITERIA FOR CONFORMITY)	-	0	-
Clause 14(Marking)	-	200	-
4(Grade, Type and Construction)	-	1000	-
5(Sizes and Thickness)	-	1000	-
6.1(Timber)	-	200	-
6.2(Plywood for flush door shutter)	-	4000	-
6.3(Cross-Bands )	-	1000	-
6.4.1(Commercial Face Veneers)	-	1000	-
6.4.2(Decorative face veneers)	-	1000	-
6.6(Adhesives)	-	4000	-
6.7(Particle Board)	-	1000	-
6.8(Medium Density Fibre)	-	1000	-
6.9(Alternative Materials)	-	1000	-
7(Construction)	-	500	-
8.1(Locks)	-	200	-
8.2(Other Fittings)	-	1000	-
9(Workmanship and Finish)	-	200	-
10(Tests)	-	0	-
11.1(Dimensions and Squareness Test)	-	1000	-
11.2(General Flatness Test)	-	1000	-
11.3(Local Planeness Test)	-	1000	-
11.4(Impact Indentation Test)	-	1500	-
11.5(Flexure Test)	-	1000	-
11.6(Edge Loading Test)	-	2000	-
11.7(Shock Resistance Test)	-	1500	-
11.8(Buckling Resistance Test)	-	1000	-
11.9(Slamming Test)	-	1000	-
11.1(Misuse Test)	-	1500	-
11.11(Varying Humidity Test)	-	2500	-
11.12(End Immersion Test)	-	1500	-
11.13(Knife Test)	-	500	-
11.14(Glue Adhesion Test)	-	1000	-
11.15(Screw Withdrawal Resistance Test)	-	2000	-
14(Marking )	-	200	-
9.1(Workmanship & Finish)	-	200	-
9.2(Workmanship & Finish)	-	200	-
9.3(Workmanship & Finish)	-	200	-
11.1(Dimensions - Height)	-	1000	-
11.1(Dimensions - Width)	-	1000	-
11.1(Dimensions - Thickness)	-	1000	-
11.1(Dimensions - Variation in thickness)	-	1000	-
11.1(Dimensions - Squareness)	-	1000	-
11.12(End immersion test)	-	1500	-
11.13(Knife Test)	-	500	-
11.14(Glue Adhesion Test)	-	1000	-
4(GRADE)	-	200	-
4(TYPE)	-	200	-
5(SIZES)	-	200	-
7.1.1(CONSTRUCTION-Blockboard Core)	-	1000	-
7.1.1(CONSTRUCTION-Blockboard Core)	-	1000	-
7.1.2(CONSTRUCTION-Blockboard Core)	-	1000	-
7.3.2(CONSTRUCTION-Stiles and Rails)	-	1000	-
7.3.2(a)(CONSTRUCTION-Stiles and Rails-Joints)	-	1000	-
7.3.2(b)(CONSTRUCTION-Stiles and Rails-Joints)	-	1000	-
7.3.2(c)(CONSTRUCTION-Stiles and Rails-Joints)	-	1000	-
7.3.3(CONSTRUCTION-Stiles and Rails)	-	1000	-
9.1(WORKMANSHIP AND FINISH)	-	200	-
9.2(WORKMANSHIP AND FINISH)	-	200	-
9.3(WORKMANSHIP AND FINISH)	-	200	-
11.1(Dimensions and Squareness Test)	-	1000	-
11.1(Dimensions and Squareness Test)	-	1000	-
11.1(Dimensions and Squareness Test)	-	1000	-
11.1(Dimensions and Squareness Test)	-	1000	-
11.1(Dimensions and Squareness Test)	-	1000	-
11.2(General Flatness Test)	-	1000	-
11.2(General Flatness Test)	-	1000	-
11.2(General Flatness Test)	-	1000	-
11.3(Local Planeness Test)	-	1000	-
11.4(Impact Indentation Test)	-	1500	-
11.4(Impact Indentation Test)	-	1500	-
11.5(Flexure Test)	-	1000	-
11.5(Flexure Test)	-	1000	-
11.6(Edge Loading Test)	-	2000	-
11.6(Edge Loading Test)	-	2000	-
11.6(Edge Loading Test)	-	2000	-
11.6(Edge Loading Test)	-	2000	-
11.7.1(Shock Resistance Test)	-	1500	-
11.7.2(Shock Resistance Test)	-	1500	-
11.8(Buckling Test)	-	1000	-
11.8(Buckling Test)	-	1000	-
11.8(Buckling Test)	-	1000	-
11.9.2(Slamming Test)	-	1000	-
11.9.3(Slamming Test)	-	1000	-
11.10(Misuse Test)	-	1500	-
11.11(Varying Humidity Test)	-	2500	-
11.11(Varying Humidity Test)	-	2500	-
11.12(End Immersion Test)	-	1500	-
11.13(Knife Test)	-	500	-
11.14(Glue Adhesion Test)	-	1000	-
11.15(Screw Withdrawal Resistance Test)	-	2000	-
11.15(Screw Withdrawal Resistance Test)	-	2000	-
Clause 4.2(grades specified)	-	200	-
Clause 5(SIZES)	-	200	-
Clause 6.1.1(species of timber)	-	200	-
Clause 6.1.2(list of species)	-	0	-
Clause 6.1.3(moisture content)	-	200	-
Clause 6.2.1(Plywood)	-	4000	-
Clause 6.2.2(Decorative plywood)	-	4000	-
Clause 6.3(Cross-Bands)	-	1000	-
Clause 6.4.1(Commercial Face Veneers)	-	1000	-
Clause 6.4.2(Decorative Face Veneers)	-	1000	-
Clause 6.6.1(Adhesives)	-	4000	-
Clause 6.7(Particle Board)	-	1000	-
Clause 6.8(Medium density fibre board)	-	1000	-
Clause 6.9(Alternative Materials)	-	1000	-
Clause 7.1(Blockboard Core)	-	1000	-
Clause 7.2(Particle Board or Medium Density Fibre)	-	1000	-
Clause 7.3(Stiles and Rails)	-	1000	-
Clause 7.4(Levelling)	-	1000	-
Clause 7.5(Face Panel)	-	1000	-
Clause 7.6(Lipping)	-	1000	-
Clause 7.7(Rebating)	-	1000	-
Clause 7.8(Opening for Glazing)	-	1000	-
Clause 7.9(Venetian)	-	1000	-
Clause 8.1(Locks)	-	1000	-
Clause 9(WORKMANSHIP AND FINISH)	-	200	-
Clause 10.1(Classification of Tests)	-	0	-
Clause 11.1(Dimensions and Squareness Test)	-	1000	-
Clause 11.2(General Flatness Test)	-	1000	-
Clause 11.3(Local Planeness Test)	-	1000	-
Clause 11.4(Impact Indentation Test)	-	1500	-
Clause 11.5(Flexure Test)	-	1000	-
Clause 11.6(Edge Loading Test)	-	2000	-
Clause 11.7(Shock Resistance Test)	-	1500	-
Clause 11.8(Buckling Resistance Test)	-	1000	-
Clause 11.9(Slamming Test)	-	1000	-
Clause 11.10(Misuse Test)	-	1500	-
Clause 11.11(Varying Humidity Test)	-	2500	-
Clause 11.12(End Immersion Test)	-	1500	-
Clause 11.13(Knife Test)	-	500	-
Clause 11.14(Glue Adhesion Test)	-	1000	-
Clause 11.15(Screw Withdrawal Resistance Test)	-	2000	-
Clause 12(SAMPLING AND CRITERIA FOR CONFORMITY)	-	0	-
Clause 14(Marking)	-	200	-
4(Grade, Type and Construction)	-	1000	-
5(Sizes and Thickness)	-	1000	-
6.1(Timber)	-	200	-
6.2(Plywood for flush door shutter)	-	4000	-
6.3(Cross-Bands )	-	1000	-
6.4.1(Commercial Face Veneers)	-	1000	-
6.4.2(Decorative face veneers)	-	1000	-
6.6(Adhesives)	-	4000	-
6.7(Particle Board)	-	1000	-
6.8(Medium Density Fibre)	-	1000	-
6.9(Alternative Materials)	-	1000	-
7(Construction)	-	500	-
8.1(Locks)	-	200	-
8.2(Other Fittings)	-	1000	-
9(Workmanship and Finish)	-	200	-
10(Tests)	-	0	-
11.1(Dimensions and Squareness Test)	-	1000	-
11.2(General Flatness Test)	-	1000	-
11.3(Local Planeness Test)	-	1000	-
11.4(Impact Indentation Test)	-	1500	-
11.5(Flexure Test)	-	1000	-
11.6(Edge Loading Test)	-	2000	-
11.7(Shock Resistance Test)	-	1500	-
11.8(Buckling Resistance Test)	-	1000	-
11.9(Slamming Test)	-	1000	-
11.1(Misuse Test)	-	1500	-
11.11(Varying Humidity Test)	-	2500	-
11.12(End Immersion Test)	-	1500	-
11.13(Knife Test)	-	500	-
11.14(Glue Adhesion Test)	-	1000	-
11.15(Screw Withdrawal Resistance Test)	-	2000	-
14(Marking )	-	200	-

-
Included w.e.f. 22.01.2026 Exclusion: Clause 13 (ADDITIONAL REQUIREMENTS FOR ECO MARK)

1346

Akshat Test Lab & Calibration Services, Ghaziabad

8186526

IS 302 : Part 2 : Sec 2 (1997)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 2 vacuum cleaners and water suction cleaning appliances

11750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Rating)	-	500	For BIS type test - Rs.11750/- only. For BIS Acceptance Tests - Rs.9500/- only. For BIS Routine Test - Rs. 5000/- only. For others type test 17500/- only.
6(Classification)	-	500	For BIS type test - Rs.11750/- only. For BIS Acceptance Tests - Rs.9500/- only. For BIS Routine Test - Rs. 5000/- only. For others type test 17500/- only.
7(Marking)	-	1000	For BIS type test - Rs.11750/- only. For BIS Acceptance Tests - Rs.9500/- only. For BIS Routine Test - Rs. 5000/- only. For others type test 17500/- only.
8(Protection against Access to Live Parts)	-	1500	For BIS type test - Rs.11750/- only. For BIS Acceptance Tests - Rs.9500/- only. For BIS Routine Test - Rs. 5000/- only. For others type test 17500/- only.
9(Starting Of Motor Operated Appliances)	-	1000	For BIS type test - Rs.11750/- only. For BIS Acceptance Tests - Rs.9500/- only. For BIS Routine Test - Rs. 5000/- only. For others type test 17500/- only.
10("Power Input & Current")	-	1000	For BIS type test - Rs.11750/- only. For BIS Acceptance Tests - Rs.9500/- only. For BIS Routine Test - Rs. 5000/- only. For others type test 17500/- only.
11(Temperature Rise/ Heating)	-	1500	For BIS type test - Rs.11750/- only. For BIS Acceptance Tests - Rs.9500/- only. For BIS Routine Test - Rs. 5000/- only. For others type test 17500/- only.
12(OPERATION UNDER OVERLOAD CONDITIONS OF APPLIANCES WITH HEATING ELEMENTS)	-	1000	For BIS type test - Rs.11750/- only. For BIS Acceptance Tests - Rs.9500/- only. For BIS Routine Test - Rs. 5000/- only. For others type test 17500/- only.
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	1500	For BIS type test - Rs.11750/- only. For BIS Acceptance Tests - Rs.9500/- only. For BIS Routine Test - Rs. 5000/- only. For others type test 17500/- only.
14(RADIO AND TELEVISION INTERFERENCE SUPPRESSION)	-	1000	For BIS type test - Rs.11750/- only. For BIS Acceptance Tests - Rs.9500/- only. For BIS Routine Test - Rs. 5000/- only. For others type test 17500/- only.
15(MOISTURE RESISTANCE)	-	1500	For BIS type test - Rs.11750/- only. For BIS Acceptance Tests - Rs.9500/- only. For BIS Routine Test - Rs. 5000/- only. For others type test 17500/- only.
16(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( AFTER HUMIDITY TREATMENT ))	-	1500	For BIS type test - Rs.11750/- only. For BIS Acceptance Tests - Rs.9500/- only. For BIS Routine Test - Rs. 5000/- only. For others type test 17500/- only.
17(OVERLOAD PROTECTION)	-	1000	For BIS type test - Rs.11750/- only. For BIS Acceptance Tests - Rs.9500/- only. For BIS Routine Test - Rs. 5000/- only. For others type test 17500/- only.
19(ABNORMAL OPERATION)	-	1500	For BIS type test - Rs.11750/- only. For BIS Acceptance Tests - Rs.9500/- only. For BIS Routine Test - Rs. 5000/- only. For others type test 17500/- only.
20(STABILITY AND MECHANICAL HAZARDS)	-	1000	For BIS type test - Rs.11750/- only. For BIS Acceptance Tests - Rs.9500/- only. For BIS Routine Test - Rs. 5000/- only. For others type test 17500/- only.
21(MECHANICAL STRENGTH)	-	1000	For BIS type test - Rs.11750/- only. For BIS Acceptance Tests - Rs.9500/- only. For BIS Routine Test - Rs. 5000/- only. For others type test 17500/- only.
22(Construction)	-	1500	For BIS type test - Rs.11750/- only. For BIS Acceptance Tests - Rs.9500/- only. For BIS Routine Test - Rs. 5000/- only. For others type test 17500/- only.
23(INTERNAL WIRING)	-	1500	For BIS type test - Rs.11750/- only. For BIS Acceptance Tests - Rs.9500/- only. For BIS Routine Test - Rs. 5000/- only. For others type test 17500/- only.
24(COMPONENTS)	-	1500	For BIS type test - Rs.11750/- only. For BIS Acceptance Tests - Rs.9500/- only. For BIS Routine Test - Rs. 5000/- only. For others type test 17500/- only.
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	1000	For BIS type test - Rs.11750/- only. For BIS Acceptance Tests - Rs.9500/- only. For BIS Routine Test - Rs. 5000/- only. For others type test 17500/- only.
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	1000	For BIS type test - Rs.11750/- only. For BIS Acceptance Tests - Rs.9500/- only. For BIS Routine Test - Rs. 5000/- only. For others type test 17500/- only.
27(PROVISION FOR EARTHING)	-	2000	For BIS type test - Rs.11750/- only. For BIS Acceptance Tests - Rs.9500/- only. For BIS Routine Test - Rs. 5000/- only. For others type test 17500/- only.
28(SCREWS AND CONNECTIONS)	-	1000	For BIS type test - Rs.11750/- only. For BIS Acceptance Tests - Rs.9500/- only. For BIS Routine Test - Rs. 5000/- only. For others type test 17500/- only.
29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION)	-	1500	For BIS type test - Rs.11750/- only. For BIS Acceptance Tests - Rs.9500/- only. For BIS Routine Test - Rs. 5000/- only. For others type test 17500/- only.
30(RESISTANCE TO HEAT, FIRE AND TRACKING)	-	1500	For BIS type test - Rs.11750/- only. For BIS Acceptance Tests - Rs.9500/- only. For BIS Routine Test - Rs. 5000/- only. For others type test 17500/- only.
31(RESISTANCE TO RUSTING)	-	1500	For BIS type test - Rs.11750/- only. For BIS Acceptance Tests - Rs.9500/- only. For BIS Routine Test - Rs. 5000/- only. For others type test 17500/- only.
32(RADIATION HAZARDS)	-	1000	For BIS type test - Rs.11750/- only. For BIS Acceptance Tests - Rs.9500/- only. For BIS Routine Test - Rs. 5000/- only. For others type test 17500/- only.

-
"1 19.11.4.7 (Harmonics) Harmonics Test facility not available 2 19.11.4.6 (Class 3 Voltage dips and interruptions) Class 3 Voltage dips and interruptions Test facility not available 3 19.11.4.5 (Immunity to conducted discharges) Immunity to conducted discharges Test facility not available 4 19.11.4.4 (Surge immunity test) Surge immunity test Test facility not available 5 19.11.4.3 (Fast transient bursts) Fast transient bursts Test facility not available 6 19.11.4.2 (Radiated fields) Radiated fields Test facility not available 7 19.11.4.1 (Electrostatic discharges) Electrostatics discharges Test facility not available"

1347

Urja Metallurgical Services LLP

7194806

IS 17876 (2022)

Stainless steel welded pipes and tubes for general service

All Grade / Type / Size / Designation / Class

15500 View breakup
-

Clause No.	Exclusion	Remark
8.0 (Table No.- 1)(Chemical Composition,% - IS 228)	-	-
10.1 (Table No.- 4)(Tensile Test,Mpa)	-	-
11(Transverse Tension Test,%)	-	-
12 (Table No.- 5)(Hardness Test,HRC,HRB&BHN- IS 1500 (Part 1) or IS 1586 (Part 1))	-	-
13 (Table No.- 7)(Flange Test-IS 2330)	-	-
14(Reverse Flattaning Test)	-	-
15(Flattaning Test-IS 2328)	-	-
16 (Table No.- 8)(Grain Size,No.-IS 4748)	-	-
18(Leak Tighteness Test)	-	-
19("Corrosion Test-IS 10461 (Part 1) or IS 10461 (Part 2)")	-	-
20(Eddy current test, Air under water test ,Radiographic tests)	-	-
22(Workmanship, Finish and Appearance)	-	-
23(Repair by Welding or Grinding)	-	-
24 (Table No.- 9,10&11)(Dimensions and Tolerances,mm)	-	-
"Clause 8.1 and 8.2 - Table 1"(Carbon)	-	-
"Clause 8.1 and 8.2 - Table 1"(Silicon)	-	-
"Clause 8.1 and 8.2 - Table 1"(Mangnese)	-	-
"Clause 8.1 and 8.2 - Table 1"(Nickel)	-	-
"Clause 8.1 and 8.2 - Table 1"(Chromium)	-	-
"Clause 8.1 and 8.2 - Table 1"(Molybdenum)	-	-
"Clause 8.1 and 8.2 - Table 1"(Sulphur)	-	-
"Clause 8.1 and 8.2 - Table 1"(Phosphorous)	-	-
"Clause 8.1 and 8.2 - Table 1"(Nitrogen)	-	-
"Clause 8.1 and 8.2 - Table 1"(Copper)	-	-
"Clause 8.1 and 8.2 - Table 1"(Aluminium)	-	-
"Clause 8.1 and 8.2 - Table 1"(Titanium)	-	-
"Clause 8.1 and 8.2 - Table 1"(Niobium)	-	-
"Clause 19 IS 10461(Part 1)"(Corrosion Test)	-	-
Clause 10.1 - Table 4(Tensile Strength)	-	-
Clause 10.1 - Table 4(Yield Strength)	-	-
Clause 10.1 - Table 4(Percent Elongation)	-	-
Clause 11(Transverse Tension Test)	-	-
Clause 12(Hardness Test)	-	-
Clause 13(Flange Test)	-	-
Clause 14(Reverse Flattening Test)	-	-
Clause 15(Flattening Test)	-	-
Clause 16(Grain Size)	-	-
Clause 18()	-	-
"Clause 19 IS 10461(Part 2)"(Corrosion Test)	-	-
Clause 22(Workmanship, Finish & Appearance)	-	-
Clause 24 Annexure A, Table 9 Table 10(Dimensions & Tolerances)	-	-
8.1 & 8.2 (Table No.- 1)(Vanadium (V))	-	-
8.1 & 8.2 (Table No.- 1)(Tungstun (W))	-	-
8.1 & 8.2 (Table No.- 1)(Tantalum (Ta))	-	-
12.2(Hardness test)	-	-
17(Sampling)	-	-
25(Marking)	-	-
6.7, Table 7, ii)(c) Chromium VI)	-	-

23 Dec, 2028

-
Included w.e.f 27.01.2026 Exclusion: Cl 20 (Eddy current test, Air under water test ,Radiographic tests)

1348

Eureka Analytical Services Private Limited, Bengaluru

6171206

IS 13428 (2024)

PACKAGED NATURAL MINERAL WATER - SPECIFICATION Third Revision

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.1(Escherichia coli)	-	300	-
6.1.2(Coliform)	-	300	-
6.1.3(Faecal Streptococci)	-	500	-
6.1.4(Sulphite Reducing Anaerobe)	-	500	-
6.1.5(Pseudomonas aeruginosa)	-	600	-
6.1.6(Yeast and moould)	-	400	-
6.1.7(Salmonella)	-	550	-
6.1.8(Vibrio Cholera)	-	500	-
6.2/Table 1/i(Colour)	-	200	-
6.2/Table 1/ii(Odour)	-	200	-
6.2/Table 1/iii(Taste)	-	200	-
6.2/Table 1/iv(Turbidity)	-	300	-
6.2/Table 1/v(Total Dissoved)	-	300	-
6.2/Table 1/vi(pH Value)	-	300	-
6.2/Table 2/i(Nitrate)	-	300	-
6.2/Table 2/ii(Nitrite)	-	300	-
6.2/Table 2/iii(Sulphide)	-	300	-
6.2/Table 2/iv(Manganese)	-	300	-
6.2/Table 2/v(Copper)	-	300	-
6.2/Table 2/vi(Fluoride)	-	300	-
6.2/Table 2/vii(Barium)	-	300	-
6.2/Table 2/viii(Antimony)	-	300	-
6.2/Table 2/ix(Borate)	-	300	-
6.2/Table 2/x(Silver)	-	300	-
6.2/Table 2/xi(Chloride)	-	300	-
6.2/Table 2/xii(Sulphate)	-	300	-
6.2/Table 2/xiii(Magnesium)	-	300	-
6.2/Table 2/xiv(Calcium)	-	300	-
6.2/Table 2/xv(Sodium)	-	300	-
6.2/Table 2/xvi(Alkalinity)	-	300	-
6.2/Table 2/xvii(Selenium)	-	300	-
6.2/Table 2/xviii(Mineral Oil)	-	300	-
6.2/Table 2/xix(Phenolic Compounds)	-	300	-
6.2/Table 2/xx(Anionic Surface active agents)	-	300	-
6.2/Table 3/i(Arsenic)	-	300	-
6.2/Table 3/ii(Cadmium)	-	300	-
6.2/Table 3/iii(Cyanide)	-	300	-
6.2/Table 3/iv(Chromium)	-	300	-
6.2/Table 3/v(Mercury)	-	300	-
6.2/Table 3/vi(Lead)	-	300	-
6.2/Table 3/vii(Nickel)	-	300	-
6.2/Table 3/viii(Polychlorinated biphenyle (PCB))	-	2000	-
6.2/Table 3/ix(Polynuclear aromatic hydrocarbons)	-	2000	-
6.2/Table 3/x(Uranium)	-	1500	-
Cl- 6.3, Annex N (i)(P,P -DDE)	-	2000	-
Cl- 6.3, Annex N (i)(O,P -DDE)	-	2000	-
Cl- 6.3, Annex N (i)(P,P- DDT)	-	2000	-
Cl- 6.3, Annex N (i)(O,P -DDT)	-	2000	-
Cl-6.3, Annex N (i)(P,P- DDD)	-	2000	-
Cl-6.3, Annex N (i)(O,P-DDD)	-	2000	-
Cl- 6.3, Annex N (ii)(γ-HCH (lindane))	-	2000	-
Cl- 6.3, Annex N (iii)(α-HCH)	-	2000	-
Cl- 6.3, Annex N (iii)(β-HCH)	-	2000	-
Cl- 6.3, Annex N (iii)(δ - HCH)	-	2000	-
Cl- 6.3, Annex N (iv)(Endosulfan - α)	-	2000	-
Cl- 6.3, Annex N (iv)(Endosulfan - β)	-	2000	-
Cl- 6.3, Annex N (iv)(Endosulfan - sulphate)	-	2000	-
Cl- 6.3, Annex N (v)(Monocrotophos)	-	2000	-
Cl- 6.3, Annex N (vi)(Ethion)	-	2000	-
Cl- 6.3, Annex N (vii)(Chlorpyrifos)	-	2000	-
Cl- 6.3, Annex N (viii)(Phorate and its oxygen analogue)	-	2000	-
Cl- 6.3, Annex N (viii)(phorate sulphoxide)	-	2000	-
Cl- 6.3, Annex N (viii)(phorate sulphone)	-	2000	-
Cl- 6.3, Annex N (ix)(2,4-D)	-	2000	-
Cl- 6.3, Annex N (x)(Butachlor)	-	2000	-
Cl- 6.3, Annex N (xi)(Isoproturon)	-	2000	-
Cl- 6.3, Annex N (xii)(Alachlor)	-	2000	-
Cl- 6.3, Annex N (xiii)(Atrazine)	-	2000	-
Cl- 6.3, Annex N (xiv)(Methyl parathion)	-	2000	-
Cl- 6.3, Annex N (xiv)(Methyl paraoxon)	-	2000	-
Cl- 6.3, Annex N (xv)(Malathion)	-	2000	-
Cl- 6.3, Annex N (xv)(malaoxon)	-	2000	-
Cl- 6.3, Annex N (xvi)(Aldrin)	-	2000	-
6.2/Table 4/i(Alpha emitters, Bq/l, Max)	-	2500	-
6.2/Table 4/ii(Beta emitters, Bq/l, Max)	-	2500	-
Cl-6.1.3(Staphylococcus aureus)	-	500	-
Cl-6.1.7(Shigella)	-	550	-
Cl-6.1.8(V. parahaemolyticus)	-	500	-
Cl-6.3, Annex N (XVI)(Dieldrin)	-	2000	-

02 Aug, 2028

-
Included w.e.f. 01.04.2026

1349

Atckon Laboratories LLP, Bahadurgarh

8186436

IS 6528 (2024)

Stainless steel wire - Specification ( Second Revision )

All grades/ All types

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 6(FREEDOM FROM DEFECTS)	-	500	-
As per clause 7(CARBON)	-	2000	-
As per clause 7(SILICON)	-	2000	-
As per clause 7(MANGANESE)	-	2000	-
As per clause 7(PHOSPHORUS)	-	2000	-
As per clause 7(SULPHUR)	-	2000	-
As per clause 7(CHROMIUM)	-	2000	-
As per clause 16.2(MARKING)	-	500	-
As per clause 15(CORROSION RESISTANCE)	-	2000	-
As per clause 14(FINISH)	-	500	-
As per clause 10.3(TORSION TEST)	-	2000	-
As per clause 10.2(REVERSE BEND TEST)	-	2000	-
As per clause 10(TENSILE TEST)	-	2000	-
As per clause 9(Dimension Tolerance)	-	500	-
As per clause 7(MOLYBEDNUM)	-	2000	-
As per clause 7(NICKEL)	-	2000	-
As per clause 7(NITROGEN)	-	2000	-
As per clause 7(COPPER)	-	2000	-
As per clause 7(NIOBIUM)	-	2000	-
As per clause 7(TITANIUM)	-	2000	-
As per clause 7(ALUMINIUM)	-	2000	-
As per clause 8(HEAT TREATMENT)	-	2000	-
As per Clause 6(FREEDOM FROM DEFECTS)	-	0	-
As per clause 7(CARBON)	-	0	-
As per clause 7(SILICON)	-	0	-
As per clause 7(MANGANESE)	-	0	-
As per clause 7(PHOSPHORUS)	-	0	-
As per clause 7(SULPHUR)	-	0	-
As per clause 7(CHROMIUM)	-	0	-
As per clause 16.2(MARKING)	-	0	-
As per clause 15(CORROSION RESISTANCE)	-	0	-
As per clause 14(FINISH)	-	0	-
As per clause 10.3(TORSION TEST)	-	0	-
As per clause 10.2(REVERSE BEND TEST)	-	0	-
As per clause 10(TENSILE TEST)	-	0	-
As per clause 9(Dimension Tolerance)	-	0	-
As per clause 7(MOLYBEDNUM)	-	0	-
As per clause 7(NICKEL)	-	0	-
As per clause 7(NITROGEN)	-	0	-
As per clause 7(COPPER)	-	0	-
As per clause 7(NIOBIUM)	-	0	-
As per clause 7(TITANIUM)	-	0	-
As per clause 7(ALUMINIUM)	-	0	-
As per clause 8(HEAT TREATMENT)	-	0	-

-
included w.e.f 27.01.2026

1350

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 2932 (2025)

Air Drying Enamel Paint for Architectural and Industrial Applications - Specification (Fifth Revision)

35500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5(Colour Categories and Wet Opacity)	-	2000	-
Cl-6.1.1(Composition- General)	-	1000	-
Cl-6.1.2(Total Non-Volatile Content)	-	2500	-
Cl-6.2.1(At Delivery)	-	1000	-
Cl-6.2.2(During Storage)	-	1000	-
Cl-6.3(Freedom from Coarse Particles)	-	500	-
Cl-6.4(Skin Formation)	-	999.99	-
Cl-6.5(Thinning Properties)	-	1000	-
Cl-6.6(Application Properties)	-	1000	-
Cl-6.7.2(Optional Durability Requirements)	-	4000	-
Cl-6.7.1, 6.8, Table-2 (i)(a) Consistency)	-	1000	-
Cl-6.7.1, 6.8, Table-2 (i)(b) Viscosity by ford cup No. 4 or 5 at(27 ± 2) ℃, s (seeNote 1))	-	1000	-
Cl-6.7.1, 6.8, Table-2 (ii)(Mass, in kg/10 litre, Min)	-	1000	-
Cl-6.7.1, 6.8, Table-2 (iii)("Drying time, h, Max a) Surface dry")	-	1000	-
Cl-6.7.1, 6.8, Table-2 (iii)("Drying time, h, Max b) Hard dry")	-	1000	-
Cl-6.7.1, 6.8, Table-2 (iii)("Drying time, h, Max c) Tack free")	-	1000	-
Cl-6.7.1, 6.8, Table-2 (iv)(Finish)	-	500	-
Cl-6.7.1, 6.8, Table-2 (v)(Gloss 60°)	-	1000	-
Cl-6.7.1, 6.8, Table-2 (vi)("Fineness of grind, microns, Max (byHegmann gauge, Min scale 0 to 8)")	-	1000	-
Cl-6.7.1, 6.8, Table-2 (vii)(Colour)	-	2000	-
Cl-6.7.1, 6.8, Table-2 (viii)("Flexibility and adhesion a) Scratch hardness after 96 h of air drying at 750 g")	-	1000	-
Cl-6.7.1, 6.8, Table-2 (viii)("Flexibility and adhesion a) Scratch hardness after 96 h of air drying at 750 g")	-	1000	-
Cl-6.7.1, 6.8, Table-2 (viii)("Flexibility and adhesion b) Bend test after 96 h of air drying with 6.25 mm in type 1 apparatus")	-	1000	-
Cl-6.7.1, 6.8, Table-2 (ix)(Flash point)	-	1000	-
Cl-6.7.1, 6.8, Table-2 (x)(Volume solids percent, Min)	-	2000	-
Cl-6.7.1, 6.8, Table-2 (xi)(Resistance to acid (Only for Class B of Type II))	-	1000	-
Cl-6.7.1, 6.8, Table-2 (xii)(Resistance to alkali (Only for Class B of Type II))	-	1000	-
Cl-6.7.1, 6.8, Table-2 (xiii)(Accelerated storage stability test)	-	2000	-
Cl-6.7.1, 6.8, Table-2 (xiv)(a) Degree of blistering, less than equal to)	-	1000	-
Cl-6.7.1, 6.8, Table-2 (xiv)(b) Degree of rusting, less than equal)	-	1000	-
Cl-6.7.1, 6.8, Table-2 (xiv)(c) Degree of cracking less than equal)	-	1000	-
Cl-6.7.1, 6.8, Table-2 (xiv)(d) Degree of flaking less than equal)	-	1000	-
Cl-6.7.1, 6.8, Table-2 (xiv)(e) Degree of chalking less than equal)	-	1000	-
Cl-6.7.1, 6.8, Table-2 (xiv)(f) Degree of colour change, ΔE, Max)	-	1000	-
Cl-6.7.1, 6.8, Table-2 (xiv)(g) Gloss retention 60°, percentage of original, Min)	-	1000	-
Cl-6.7.1, 6.8, Table-2 (xv)(Resistance to water for duration of 48 h, percentage of gloss retention in comparisonwith original, Min)	-	1000	-
Cl-6.7.1, 6.8, Table-2 (xvi)(Lead (including compounds of lead), Max)	-	3000	-
Cl-6.7.1, 6.8, Table-2 (xvii)(Volatile organic compound (VOC) gm/l, Max)	-	3000	-
Cl-6.7.1, 6.8, Table-2 (xviii)(Keeping properties)	-	1000	-
Cl-6.9, Table-3 (i)(Resistance to Humidity,test)	-	500	-
Cl-6.9, Table-3 (ii)(Resistance to transformer oil (see IS 335) at 90 ℃for 48 h)	-	500	-
Cl-6.9, Table-3 (iii)("Drying time, h, Max: a) Hard dry at 70 ℃ with 15 min flash")	-	500	-
Cl-6.9, Table-3 (iv)(Gloss 60°, Min.)	-	1000	-
Cl-6.9, Table-3 (v)(Scratch hardness (at load 1.2 kg), after 48 h air drying)	-	1000	-
Cl-6.9, Table-3 (vi) (a)(" Pigment content, percent by mass, Min, (except azure blue, oxford blue, golf red, post office red, and black colours);")	-	1000	-
Cl-6.9, Table-3 (vi) (b)(b) Non-volatile vehicle, percent by mass, Min; and)	-	1000	-
Cl-6.9, Table-3 (vi) (c)(c) Phthalic anhydride content of nonvolatile vehicle, percent by mass, Min.)	-	1000	-
Cl-6.9, Table-3 (vii)(Wet abrasion test)	-	1000	-
Cl-12(Marking)	-	500	-
Cl-5(Colour Categories and Wet Opacity)	-	0	-
Cl-6.1.1(Composition- General)	-	0	-
Cl-6.1.2(Total Non-Volatile Content)	-	0	-
Cl-6.2.1(At Delivery)	-	0	-
Cl-6.2.2(During Storage)	-	0	-
Cl-6.3(Freedom from Coarse Particles)	-	0	-
Cl-6.4(Skin Formation)	-	0	-
Cl-6.5(Thinning Properties)	-	0	-
Cl-6.6(Application Properties)	-	0	-
Cl-6.7.2(Optional Durability Requirements)	-	0	-
Cl-6.7.1, 6.8, Table-2 (i)(a) Consistency)	-	0	-
Cl-6.7.1, 6.8, Table-2 (i)(b) Viscosity by ford cup No. 4 or 5 at(27 ± 2) ℃, s (seeNote 1))	-	0	-
Cl-6.7.1, 6.8, Table-2 (ii)(Mass, in kg/10 litre, Min)	-	0	-
Cl-6.7.1, 6.8, Table-2 (iii)("Drying time, h, Max a) Surface dry")	-	0	-
Cl-6.7.1, 6.8, Table-2 (iii)("Drying time, h, Max b) Hard dry")	-	0	-
Cl-6.7.1, 6.8, Table-2 (iii)("Drying time, h, Max c) Tack free")	-	0	-
Cl-6.7.1, 6.8, Table-2 (iv)(Finish)	-	0	-
Cl-6.7.1, 6.8, Table-2 (v)(Gloss 60°)	-	0	-
Cl-6.7.1, 6.8, Table-2 (vi)("Fineness of grind, microns, Max (byHegmann gauge, Min scale 0 to 8)")	-	0	-
Cl-6.7.1, 6.8, Table-2 (vii)(Colour)	-	0	-
Cl-6.7.1, 6.8, Table-2 (viii)("Flexibility and adhesion a) Scratch hardness after 96 h of air drying at 750 g")	-	0	-
Cl-6.7.1, 6.8, Table-2 (viii)("Flexibility and adhesion a) Scratch hardness after 96 h of air drying at 750 g")	-	0	-
Cl-6.7.1, 6.8, Table-2 (viii)("Flexibility and adhesion b) Bend test after 96 h of air drying with 6.25 mm in type 1 apparatus")	-	0	-
Cl-6.7.1, 6.8, Table-2 (ix)(Flash point)	-	0	-
Cl-6.7.1, 6.8, Table-2 (x)(Volume solids percent, Min)	-	0	-
Cl-6.7.1, 6.8, Table-2 (xi)(Resistance to acid (Only for Class B of Type II))	-	0	-
Cl-6.7.1, 6.8, Table-2 (xii)(Resistance to alkali (Only for Class B of Type II))	-	0	-
Cl-6.7.1, 6.8, Table-2 (xiii)(Accelerated storage stability test)	-	0	-
Cl-6.7.1, 6.8, Table-2 (xiv)(a) Degree of blistering, less than equal to)	-	0	-
Cl-6.7.1, 6.8, Table-2 (xiv)(b) Degree of rusting, less than equal)	-	0	-
Cl-6.7.1, 6.8, Table-2 (xiv)(c) Degree of cracking less than equal)	-	0	-
Cl-6.7.1, 6.8, Table-2 (xiv)(d) Degree of flaking less than equal)	-	0	-
Cl-6.7.1, 6.8, Table-2 (xiv)(e) Degree of chalking less than equal)	-	0	-
Cl-6.7.1, 6.8, Table-2 (xiv)(f) Degree of colour change, ΔE, Max)	-	0	-
Cl-6.7.1, 6.8, Table-2 (xiv)(g) Gloss retention 60°, percentage of original, Min)	-	0	-
Cl-6.7.1, 6.8, Table-2 (xv)(Resistance to water for duration of 48 h, percentage of gloss retention in comparisonwith original, Min)	-	0	-
Cl-6.7.1, 6.8, Table-2 (xvi)(Lead (including compounds of lead), Max)	-	0	-
Cl-6.7.1, 6.8, Table-2 (xvii)(Volatile organic compound (VOC) gm/l, Max)	-	0	-
Cl-6.7.1, 6.8, Table-2 (xviii)(Keeping properties)	-	0	-
Cl-6.9, Table-3 (i)(Resistance to Humidity,test)	-	0	-
Cl-6.9, Table-3 (ii)(Resistance to transformer oil (see IS 335) at 90 ℃for 48 h)	-	0	-
Cl-6.9, Table-3 (iii)("Drying time, h, Max: a) Hard dry at 70 ℃ with 15 min flash")	-	0	-
Cl-6.9, Table-3 (iv)(Gloss 60°, Min.)	-	0	-
Cl-6.9, Table-3 (v)(Scratch hardness (at load 1.2 kg), after 48 h air drying)	-	0	-
Cl-6.9, Table-3 (vi) (a)(" Pigment content, percent by mass, Min, (except azure blue, oxford blue, golf red, post office red, and black colours);")	-	0	-
Cl-6.9, Table-3 (vi) (b)(b) Non-volatile vehicle, percent by mass, Min; and)	-	0	-
Cl-6.9, Table-3 (vi) (c)(c) Phthalic anhydride content of nonvolatile vehicle, percent by mass, Min.)	-	0	-
Cl-6.9, Table-3 (vii)(Wet abrasion test)	-	0	-
Cl-12(Marking)	-	0	-

-
Included w.e.f. 26.02.2026

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number