BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15632 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

13591

POWERONIC TEST & RESEARCH CENTRE PRIVATE LIMITED, GREATER NOIDA

8170206

IS 3854 (1997)

Switches for domestic and similar purposes - Specification (Second Revision)

rated voltage not exceeding 440 V and rated current not

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Rating)	-	500	-
6(Rating)	-	500	-
7(Classification)	-	500	-
8.2(Marking)	-	100	-
8.3(Marking)	-	100	-
8.4(Marking)	-	100	-
8.5(Marking)	-	150	-
8.6(Marking)	-	150	-
8.7(Marking)	-	150	-
8.8(Marking)	-	150	-
10(Protection against Electric Shock)	-	1000	-
11.1(Provision for earthing)	-	1000	-
12(Terminals)	-	100	-
12.2.1(Terminals)	-	100	-
12.2.2(Connection of conductor)	-	500	-
12.2.3(Mechanical strength of terminals)	-	500	-
12.2.4(Resistance to corrosion)	-	500	-
12.2.5(Undue damage to conductor)	-	500	-
12.2.7(Insertion of conductor)	-	100	-
12.2.9(Locking against accidental loosening)	-	100	-
12.2.11(Distance between screw and conductor)	-	100	-
12.3.2(Screwless terminals)	-	100	-
12.3.3(Connectin of conductor)	-	100	-
12.3.4(Material of terminals)	-	100	-
12.3.5(Clamping)	-	100	-
12.3.7(v) Interconnection of conductors [Cl. 12.3.7])	-	100	-
12.3.11(vi) Electrical & Thermal Stresses [Cl 12.3.11])	-	1000	-
12.3.12(vii) Deflection Stresses [Cl. 12.3.12])	-	150	-
13.1(a) Insulating lining, barriers and the like [Cl 13.1])	-	100	-
13.2(b) Construction of switch [Cl 13.2])	-	100	-
13.2(i) Installation Test)	-	100	-
13.3(c) Covers,cover plates and actuating members [Cl 13.3])	-	100	-
13.4(d) Ordinary switches [Cl 13.4])	-	100	-
13.5(e) Rotary switches [Cl 13.5])	-	100	-
13.6(f) Screws and other means [Cl 13.6])	-	100	-
13.7(g) Combination of switches or switches and socket outlets [Cl 13.7])	-	100	-
13.8(h) Assessories combined with switches [Cl. 13.8])	-	100	-
13.9(j) Switches other than ordinary switches [Cl. 13.9])	-	100	-
13.1(k) Switches to be installed in a box [Cl. 13.10])	-	100	-
13.11(l) Surface type switches other than ordinary switch [Cl. 13.11])	-	100	-
13.12, 13.13, 13.14(m) Inlet opening [Cl. 13.12.13.13 & 13.14])	-	100	-
13.15(q) Requirements for membrane in inlet opening [ Cl. 13.15])	-	100	-
14.4(Mechanism)	-	100	-
15.1(Resistance to Ageing, to Harmful Ingress of water and to Humidity [Cl. 15]: Resistance to Ageing, [Cl. 15.1])	-	100	-
15.2(b)Resistance to Harmful ingress of water [Cl. 15.2])	-	100	-
15.3(c) Resistance to Humidity [Cl. 15.3])	-	100	-
16.1(Insulation resistance [Cl. 16.1])	-	100	-
16.2( Electric Strength [Cl. 16.2])	-	100	-
16.3(Insulation resistance and electric strength )	-	100	-
17(Temperature- rise [Cl. 17])	-	100	-
18(Marking and breaking Capacity[Cl. 18])	-	100	-
19(Normal Operation [Cl. 19] a) General & Operation)	-	100	-
19(b) Electric Strength)	-	100	-
19(c)Temperature-rise )	-	10	-
20(Mechanical Strength Test [Cl. 20])	-	10	-
21(Resistance to Heat [Cl.21])	-	10	-
22(Screw, Current Carrying Part And Connection [Cl.22])	-	10	-
22.1(i) Screw & Nuts [Cl.22.1])	-	10	-
22.4(ii) Screw & rivets [Cl . 22.4])	-	10	-
22.3(iii) Electrical Connections [Cl.22.3])	-	10	-
22.5(iv) Current carrying part [Cl.22.5])	-	10	-
23.1(Creepage distances, clearances & distance through sealing compound )	-	10	-
24.1.1(Resistance to Abnormal Heat & Fire [Cl.24.1] [Glow Wire Test] [Cl.24.1.1])	-	500	-
24.2(Resistance to tracking [For Switch other than ordinary] [Cl.24.2])	-	500	-
19.2(Normal operation)	-	10	-
25 of IS 3854 : 1997(Resistance to rusting)	-	500	-

11 Apr, 2028

-
-

13592

POWERONIC TEST & RESEARCH CENTRE PRIVATE LIMITED, GREATER NOIDA

8170206

IS 1293 (2019)

Plugs and socket - Outlets of rated Voltage up to and including 250 Volts and rated current up to and including 16 amperes - Specification (Third Revision)

up to 250 v and rated current up to including 16 Amp

17500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Ratings)	-	10	-
7.1.1(Accessories Classification)	-	10	-
7.1.2(Accessories Classification)	-	10	-
7.1.3(Accessories Classification)	-	10	-
7.1.4(Accessories Classification)	-	10	-
7.1.5(Accessories Classification)	-	10	-
8.1(MARKING)	-	10	-
8.8(MARKING)	-	10	-
8.9(MARKING)	-	10	-
9.1(CHECKING OF DIMENSIONS)	-	10	-
9.2(CHECKING OF DIMENSIONS)	-	10	-
10.1(PROTECTION AGAINST ELECTRIC SHOCK)	-	250	-
10.1(PROTECTION AGAINST ELECTRIC SHOCK)	-	250	-
10.3(PROTECTION AGAINST ELECTRIC SHOCK)	-	10	-
10.4(PROTECTION AGAINST ELECTRIC SHOCK)	-	10	-
10.5(PROTECTION AGAINST ELECTRIC SHOCK)	-	10	-
10.6(PROTECTION AGAINST ELECTRIC SHOCK)	-	10	-
10.7(PROTECTION AGAINST ELECTRIC SHOCK)	-	10	-
11.1(PROVISIONS FOR EARTHING)	-	10	-
11.2(PROVISIONS FOR EARTHING)	-	10	-
12.1.1(TERMINALS)	-	10	-
12.1.2(TERMINALS)	-	10	-
12.2.2(TERMINALS)	-	10	-
12.2.3(TERMINALS)	-	10	-
12.2.4(TERMINALS)	-	10	-
12.2.5(TERMINALS)	-	10	-
12.2.6(TERMINALS)	-	10	-
12.2.7(TERMINALS)	-	10	-
12.2.8(TERMINALS)	-	10	-
12.3.9(TERMINALS)	-	10	-
12.3.10(TERMINALS)	-	10	-
12.3.11(TERMINALS)	-	10	-
12.3.12(TERMINALS)	-	10	-
13.1(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	10	-
13.2(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	10	-
13.3(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	10	-
13.4(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	10	-
13.5(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	10	-
13.6(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	10	-
13.7(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	10	-
13.8(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	10	-
13.9(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	10	-
13.1(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	10	-
13.11(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	10	-
13.12(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	10	-
13.13(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	10	-
13.15(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	10	-
13.16(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	10	-
13.17(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	10	-
13.18(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	10	-
13.19(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	10	-
13.21(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	10	-
13.22(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	10	-
13.23(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	10	-
14.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	10	-
14.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	10	-
14.3(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	10	-
14.4(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	10	-
14.5(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	10	-
14.16(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	10	-
14.7(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	10	-
14.8(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	10	-
14.9(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	10	-
14.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	10	-
14.11(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	10	-
14.12(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	10	-
14.13(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	10	-
14.14(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	10	-
14.15(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	10	-
14.17(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	10	-
14.18(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	10	-
14.19(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	10	-
14.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	10	-
14.21(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	10	-
14.22(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	10	-
14.23(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	10	-
14.24(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	10	-
14.25(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	10	-
14.26(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	10	-
15(INTERLOCKED SOCKET-OUTLETS)	-	100	-
16.1(RESISTANCE TO AGEING,)	-	250	-
16.2(RESISTANCE TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	250	-
16.3(Resistance to Humidity)	-	250	-
17.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	250	-
17.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	350	-
17.3(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	400	-
18(OPERATION OF EARTHING CONTACTS)	-	500	-
19(TEMPERATURE RISE)	-	500	-
20(BREAKING CAPACITY)	-	500	-
21(NORMAL OPERATION)	-	500	-
22.1(Verification of the Maximum Withdrawal Force)	-	250	-
22.2(Verification of Minimum Withdrawal Force)	-	250	-
23.1(FLEXIBLE CABLES AND THEIR CONNECTION)	-	350	-
23.3(FLEXIBLE CABLES AND THEIR CONNECTION)	-	350	-
23.4(FLEXIBLE CABLES AND THEIR CONNECTION)	-	300	-
24.1(MECHANICAL STRENGTH For all kinds of fixed socket-outlets )	-	100	-
24.1(MECHANICAL STRENGTH For portable multiple and combined socket outlets with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	100	-
24.1(MECHANICAL STRENGTH For surface mounting boxes)	-	100	-
24.2(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	100	-
24.2(MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	100	-
24.2(MECHANICAL STRENGTH For plug 1) with enclosures, covers and bodies other than elastomeric or thermoplastic material)	-	200	-
24.2(MECHANICAL STRENGTH For plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	200	-
24.3(MECHANICAL STRENGTH for fixed socket-outlets with a main part intended to be mounted directly on a surface)	-	200	-
24.4(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	200	-
24.4(MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	200	-
24.4(MECHANICAL STRENGTH For Plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	10	-
24.5(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	100	-
24.5(MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	100	-
24.5(MECHANICAL STRENGTH For Plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	100	-
24.6(MECHANICAL STRENGTH For screwed glands of accessories having an IP code higher than IP20)	-	100	-
24.7(MECHANICAL STRENGTH For plug pins provided with insulating sleeves)	-	100	-
24.8(MECHANICAL STRENGTH For shuttered socket-outlets)	-	100	-
24.9(MECHANICAL STRENGTH For portable multiple and combined socket outlets (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	100	-
24.9(MECHANICAL STRENGTH For portable multiple and combined socket outlets (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	100	-
24.1(MECHANICAL STRENGTH For Plug (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	100	-
24.1(MECHANICAL STRENGTH For Plug (1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	100	-
24.11(MECHANICAL STRENGTH For portable socket-outlets having means for suspension on a wall)	-	100	-
24.12(MECHANICAL STRENGTH For portable socket-outlets having means for suspension on a wall)	-	100	-
24.13(MECHANICAL STRENGTH For portable socket-outlets having means for suspension on a wall)	-	100	-
24.14.1(MECHANICAL STRENGTH For fixed socket-outlets)	-	100	-
24.14.2(MECHANICAL STRENGTH For fixed socket-outlets)	-	100	-
24.14.3(MECHANICAL STRENGTH For plugs and portable socket-outlets)	-	100	-
25.1(RESISTANCE TO HEAT Accessories and surface mounting boxes)	-	100	-
25.2(RESISTANCE TO HEAT Parts of insulating material necessary to retain current-carrying parts of the earthing circuit in position, as well as parts of the front surface zone of thermoplastic material)	-	100	-
25.3(RESISTANCE TO HEAT Parts of insulating material not necessary to retain current-carrying parts and parts of the earthing circuit in position, even though they are in contact with them)	-	250	-
25.4(RESISTANCE TO HEAT )	-	250	-
26.2(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	10	-
26.1(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	100	-
26.3(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	100	-
26.4(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	100	-
26.5(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	100	-
26.6(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	300	-
26.7(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	200	-
27.1(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	250	-
27.2(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	2	-
27.3(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	50	-
28.1.1(Resistance to Abnormal Heat and to Fire Glow-Wire Test)	-	3000	-
28.1.2(Resistance to Abnormal Heat and to Fire for plugs with pins provided with insulating sleeves)	-	1000	-
28.2(Resistance to Tracking For accessories other than IP code higher than IPX0 parts of insulating material retaining live parts in position)	-	1000	-
29(RESISTANCE TO RUSTING)	-	1000	-
30.1(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Pressure Test at High Temperature)	-	250	-
30.2(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Static Damp Heat Test)	-	250	-
30.3(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Tests at Low Temperature)	-	250	-
30.4(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Impact Test at Low Temperature)	-	250	-

11 Apr, 2028

-
-

13593

POWERONIC TEST & RESEARCH CENTRE PRIVATE LIMITED, GREATER NOIDA

8170206

IS 9857 (1990)

Welding cables - Specification (First Revision)

450/750 Volts

17000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1 a) 1)(Annealing test - IS 10810: Part 1)	-	500	-
10.1 a) 2)(Conductor resistance tes - IS 10810 : Part 5)	-	500	-
Table 1 (Thickness of covering)	-	500	-
10.1 c) 1)(Physical tests for covering : Tensile strength )	-	500	-
10.1 c) 1)(Physical tests for covering : Elongation at break )	-	500	-
10.1 c) 2)(Physical tests for covering - Ageing in Air oven : Tensile strength )	-	500	-
10.1 c) 2)(Physical tests for covering -Ageing in Air oven : Elongation at break )	-	500	-
10.1 c) 2)(Physical tests for covering - Ageing in Air oven : Tensile strength variation)	-	500	-
10.1 c) 2)(Physical tests for covering -Ageing in Air oven : Elongation variation at break )	-	500	-
Table 2(Ageing in air bomb - Elongation)	-	1000	-
Table 2(Ageing in air bomb - Tensile strength )	-	1000	-
Table 2(Oil resistance - Elongation)	-	1000	-
Table 2(Oil resistance - Tensile strength )	-	1000	-
10.1 c) 4)(Physical tests for covering - Oil Resistance : Tensile strength variation )	-	1000	-
10.1 c) 4)(Physical tests for covering - Oil Resistance : Elongation variation at break )	-	1000	-
10.1 c) 5)(Hot set test )	-	500	-
11.1(High Voltage Test ( Water Immersion Test ))	-	2000	-
11.3(Static Flexibility Test)	-	500	-
11.4(Flammability Test)	-	2000	-
4(Conductor : Material )	-	0	-
5(SEPARATOR)	-	0	-
6(COVERING)	-	0	-
7(CONDUCTOR : CONSTRUCTION )	-	0	-
8(S E P A R A T O R)	-	0	-
9.1(C O V E R I N G : Application )	-	0	-
9.2(T h i c k n e s s o f C o v e r i n g)	-	0	-
9.3(T o l e r a n c e on Thickness o f C o v e r i n g)	-	0	-
9.4(A p p l i c a t i o n of C o v e r i n g)	-	0	-
9.5(Colour of C o v e r i n g)	-	0	-
12.1(Manufacturer's Identification)	-	0	-
12.2(Cable Identification)	-	0	-
12.3(Cable Code)	-	0	-
13.2(Marking)	-	0	-
Table 4(Copper purity test)	-	1500	-

11 Apr, 2028

-
-

13594

Central Power Research Institute (CPRI), Bangalore

6101024

IS 13340 (1993)

Power capacitors of self-Healing type for AC power systems having rated voltage up to 650 V - Specification

1100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
18.1(AC VOLTAGE TEST BETWEEN TERMINALS : Routiue Test)	-	1100		Test charges are dependent on the kvar of the test sample
19.1(Voltage test between terminals and container : routine test)	-	850		-

31 Dec, 2026

-
-

13595

BIS, Northern Regional Laboratory (NRL)

None

IS 412 (1975)

Specification for expanded metal steel sheets for general purposes (Second Revision)

675 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 3.2 (Sulphur)	-
Cl. 3.2 (Phosphorus)	-
Cl. 3.2 (Nitrogen)	-

-
Test facility is complete

13596

BIS, Northern Regional Laboratory (NRL)

None

IS 4432 (1988)

Specification for case hardening steels (First Revision)

Please see remarks. View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
TABLE-1 (Clause-5) ( CARBON)	-
TABLE-1 (Clause-5) (SULPHUR)	-
TABLE-1 (Clause-5) (PHOSPHURS)	-
TABLE-1 (Clause-5) (MANGANESE)	-
TABLE-1 (Clause-5) (SILICON)	-
TABLE-1 (Clause-5) (NITROGEN)	-

-
Excluding Cr, Ni, Mo, Cu and V

13597

BIS, Northern Regional Laboratory (NRL)

None

IS 4409 (1973)

Specification for ferronickel (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.4, Table 1 (C)	-
Cl.4, Table 1 (Si)	-
Cl.4, Table 1 (Mn)	-
Cl.4, Table 1 (P)	-
Cl.4, Table 1 (S)	-

-
Chemical tests not available

13598

POWERONIC TEST & RESEARCH CENTRE PRIVATE LIMITED, GREATER NOIDA

8170206

IS 694 (2010)

Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 v (Fourth Revision)

for rated voltages up to & including 450/750 V

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.6(Halogen evolution)	-	100	-
10.7(Temperature index)	-	100	-
Table 1 iii) c) 3)(Elongation (After ageing))	-	100	-
Table 1 iii) c) 3)(Tensile strength (After ageing))	-	100	-
Table 1 iii) c) 1)(Elongation (Without ageing))	-	100	-
Table 1 iii) c) 1)(Tensile strength (Without ageing))	-	100	-
4.1(Annealing test (for copper))	-	400	-
Table 1 iii) d) 2)(Loss of mass- Sheath )	-	50	-
Table 1 iii) c) 2)(Loss of mass- Insulation )	-	400	-
Table 1 iii) d) 4)(Shrinkage- Sheath )	-	400	-
Table 1 iii) c) 4)(Shrinkage-Insulation)	-	400	-
Table 1 iii) d) 6)(Hot deformation -Indentation depth - Sheath )	-	400	-
Table 1 iii) c) 6)(Hot deformation - Indentation depth- Insulation)	-	400	-
Table 1 iii) d) 7)(Thermal stability- Sheath )	-	400	-
Table 1 iii) c) 7)(Thermal stability- Insulation )	-	400	-
Table 1 iii) d) 8)(Cold bend for sheath)	-	400	-
Table 1 iii) c) 8)(Cold bend for insulation)	-	400	-
Table 1 iii) c) 9)(Cold impact for insulation)	-	400	-
Table 1 iii) d) 9)(Cold impact for sheath)	-	400	-
10.4(Flammability test- Unaffected portion)	-	400	-
10.4(Flammability test-Burning after flame removal)	-	400	-
10.5(Oxygen index)	-	400	-
10.8(Smoke density rating)	-	400	-
10.1(HV (water immersion))	-	400	-
10.2(HV (room temperature))	-	400	-
table 1 e) 3) (IR constant- max. Temp)	-	400	-
table 1 e) 3) (IR constant- Room temp )	-	400	-
10.9(Additional ageing test (OU cables only) -HV test (at 60±3oC))	-	400	-
Table 1 iii) c) 3)(TS variation)	-	400	-
Table 1 iii) c) 3)(Elongation variation)	-	400	-
table 1 e) 3) (Volume Resistivity - Maximum temp)	-	400	-
table 1 e) 3) (Volume Resistivity - Room temp )	-	400	-
Table 1 iii) c) 5)(Heat shock-Insulation )	-	400	-
Table 1 iii) d) 5)(Heat shock-Sheath )	-	400	-
4.1(Wrapping test (for Al))	-	400	-
10.11(Per sulphate test (for tinned Cu cable only))	-	400	-
4.2(Conductor resistance test)	-	400	-
4.1(Tensile test (for Al)- After Stranding)	-	400	-
4.1(Tensile test (for Al)-Before Stranding)	-	400	-
9(Overall dimensions)	-	400	-
5.3(Thickness of Insulation)	-	400	-
8.3(Thickness of Sheath)	-	400	-
13(Cable code)	-	0	-
11.2(Legibility)	-	0	-
11.1(Durability)	-	0	-
11(Identification)	-	0	-
12(CONSTRUCTION Core Identification)	-	0	-
8.1(Sheath Material )	-	0	-
7(Binder Tape)	-	0	-
6.2(Filler)	-	0	-
6.1(Filler)	-	0	-
5.1(Insulation)	-	0	-
4.4(Joints in Conductor)	-	0	-
12.0(Core identification)	-	0	-
4, IS 8130(Construction of conductor)	-	0	-
Table 2, IS 8130(No fo wire in a conductor)	-	0	-
8.3(Minimum thickness of Sheath)	-	0	-
8.3(Avarage thickness of Sheath)	-	0	-
5.3(Avarage thickness of insulation)	-	0	-
Table 4(Copper purity test)	-	3000	-

11 Apr, 2028

-
-

13599

BIS, Eastern Regional Laboratory (ERL)

None

IS 5872 (1990)

Cold rolled steel strips (Box Strappings) - Specification

6050 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 6 (UTM)	-
Cl 7 (Bending To Both Side At 90°, Then Straight)	-
Cl 9 (Workmanship)	-
Cl 10 (Width & Thickness)	-
Cl 11 (Workmanship)	-
Cl. 6 Table 3 (Elongation at 50 mm gauge length)	-
5.0 & 5.1 , Table 1 & 2 (Carbon)	-
5.0 & 5.1 , Table 1 & 2 (Manganese)	-
5.0 & 5.1 , Table 1 & 2 (Sulphur)	-
5.0 & 5.1 , Table 1 & 2 (Phosphorus)	-
5.0 & 5.1 , Table 1 & 2 (Niobium)	-
5.0 & 5.1 , Table 1 & 2 (Vanadium)	-
5.0 & 5.1 , Table 1 & 2 (Titanium)	-
5.0 & 5.1 , Table 1 & 2 (Boron)	-
5.0 & 5.1 , Table 1 & 2 (Micro Alloying Elements)	-

-
Excluding Salt spray test

13600

MATERIAL TESTING LABORATORY LLP

8176306

IS 4454 : Part 4 (2001)

Steel wires for mechanical springs: Part 4 stainless steel wire (Second Revision)

All Grades

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table 1. Cl.1.1,1.2,7.1 & 7.2(Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	250	-
Table 1. Cl.1.1,1.2,7.1 & 7.2(Silicon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	250	-
Table 1. Cl.1.1,1.2,7.1 & 7.2(Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	250	-
Table 1. Cl.1.1,1.2,7.1 & 7.2(Suphur- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	250	-
Table 1. Cl.1.1,1.2,7.1 & 7.2(Phosphorous- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	250	-
Table 1. Cl.1.1,1.2,7.1 & 7.2(Chromium- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	250	-
Table 1. Cl.1.1,1.2,7.1 & 7.2(Molybdenum- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	250	-
Table 1. Cl.1.1,1.2,7.1 & 7.2(Nickel- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	250	-
8(Freedom from defects)	-	500	-
9(Dimensions & Tolerances)	-	1000	-
10.1.1, Table 4(Tensile strength)	-	500	-
10.1.1, Table 4(Reduction in area)	-	500	-
10.2(Wrapping test)	-	2000	-
10.3(Reverse torsion test)	-	1000	-
10.4(Cast of the wire)	-	1000	-
10.5(Bend test)	-	500	-
10.6(Coiling test)	-	500	-
11(Surface finish)	-	250	-
15.1(Marking)	-	250	-

-
Scope restricted to all other than Wires of diameter less than 1.5 mm and greater than 18 mm.

13601

MATERIAL TESTING LABORATORY LLP

8176306

IS 4454 : Part 2 (2001)

Steel wire for mechanical springs - Specification february 2001: Part 2 oil hardened and tempered steel wire (Second Revision)

All Grades

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1, 7.2(carbon)	-	250	-
7.1, 7.2(silicon )	-	250	-
7.1, 7.2(manganese)	-	250	-
7.1, 7.2(sulphur)	-	250	-
7.1, 7.2(phosphorus)	-	250	-
7.1, 7.2(copper)	-	250	-
7.1, 7.2(Chromium)	-	250	-
7.1, 7.2(Vanadium)	-	500	-
Cl 8(Workmanship)	-	250	-
Cl 9(Diameter & Difference Between Two Reading On Any Two Diameters)	-	1000	-
Cl 10(Tensile Test, Wrap Test, Torsion Test, Bend Test, Coiling and Stretching, Cast of wire, Deep Etch Test, Decarburization Test, Coating and Surface Finish & Eddy Current Test)	-	5500	-
Cl 8(Workmanship)	-	0	-
8(Freedom from defects)	-	250	-
11(Surface finish)	-	500	-
15(Marking)	-	250	-

-
Exclusion: Cl.6.2 (inclusion content) Scope restricted to all other than Wires of diameter less than 1.5 mm and greater than 18 mm.

13602

MATERIAL TESTING LABORATORY LLP

8176306

IS 4454 : Part 1 (2001)

Steel wire for mechanical springs - Specification: Part 1 cold drawn unalloyed steel wire (Third Revision)

All grades

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(Workmanship)	-	0	-
Cl 9(Diameter & Difference Between Two Reading On Any Two Diameters)	-	1000	-
Cl 10(Tensile Test, Wrap Test, Torsion Test, Bend Test, Coiling and Stretching, Cast of wire, Deep Etch Test & Decarburization Test)	-	4500	-
7.1, 7.2(carbon)	-	250	-
7.1, 7.2(manganese)	-	250	-
7.1, 7.2(silicon )	-	250	-
7.1, 7.2(sulphur)	-	250	-
7.1, 7.2(phosphorus)	-	250	-
7.1, 7.2(copper)	-	250	-
7.1, 7.2(Vanadium)	-	500	-
7.1, 7.2(nitrogen)	-	500	-
7.1, 7.2(micro alloy)	-	1000	-
Cl 8(Workmanship)	-	0	-
15(Marking)	-	250	-
8(Freedom from defects)	-	250	-
11(Coating and surface finish)	-	500	-

-
Scope restricted to all other than Wires of diameter less than 1.5 mm and greater than 18 mm.

13603

MATERIAL TESTING LABORATORY LLP

8176306

IS 2507 (1975)

Specification for cold - rolled steel strips for springs (First Revision)

All Grades

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 0.2, 4.1, 6.1, 6.2 & Table1(Carbon- Appropriate parts of IS 228.)	-	250	-
Cl. 0.2, 4.1, 6.1, 6.2 & Table1(Silicon- Appropriate parts of IS 228.)	-	250	-
Cl. 0.2, 4.1, 6.1, 6.2 & Table1(Manganese- Appropriate parts of IS 228.)	-	250	-
Cl. 0.2, 4.1, 6.1, 6.2 & Table1(Sulphur- Appropriate parts of IS 228.)	-	250	-
Cl. 0.2, 4.1, 6.1, 6.2 & Table1(Phosphorus- Appropriate parts of IS 228.)	-	250	-
Cl. 0.2, 4.1, 6.1, 6.2 & Table1(Chromium- Appropriate parts of IS 228.)	-	250	-
Cl. 0.2, 4.1, 6.1, 6.2 & Table1(Vanadium- Appropriate parts of IS 228.)	-	500	-
5(FREEDOM FROM DEFECTS)	-	250	-
12(Surface condition)	-	500	-
7(Rolling Tolerances)	-	1000	-
10(Physical properties(optional))	-	3000	-
14(Marking)	-	250	-

-
-

13604

MATERIAL TESTING LABORATORY LLP

8176306

IS 14650 (1999)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling purposes - Specificaation

All Grades

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1(Carbon)	-	250	-
Cl. 6.1(Aluminium)	-	500	-
Cl. 6.1(Manganese)	-	250	-
Cl. 6.1(Silicon)	-	250	-
Cl. 6.1(Vanadium)	-	500	-
Cl. 6.1(Chromium)	-	250	-
Cl. 6.1(Nickel)	-	250	-
Cl. 6.1(Molybdenum)	-	250	-
Cl. 6.1(Copper)	-	250	-
Cl. 6.1(Nitrogen)	-	500	-
Cl. 6.1(Titanium)	-	500	-
Cl. 6.1(Niobium)	-	500	-
12(Macro-examination )	-	3000	-
12(Sulphur Print Tests )	-	3000	-
9 & 10(Dimensions and Tolerances )	-	1000	-
11(Freedom from Defects )	-	250	-
5(Manufacture)	-	250	-
13(Marking)	-	250	-
11.4 (i)(Bend)	-	250	-
11.4 (ii)(Out of Square)	-	250	-
11.4 (iii)(Scarfing pits)	-	250	-

-
-

13605

MATERIAL TESTING LABORATORY LLP

8176306

IS 1341 (2018)

Steel Butt Hinges - Specification (Sixth Revision)

All Grades and Sizes

4725 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
TABLE-1 (Clause-4)( CARBON)	-	250	-
Clause 4 Table 1(Sulphur ( Flap))	-	250	-
TABLE-1 (Clause-4)(PHOSPHURS)	-	250	-
Clause 4 Table 1(Manganese ( Flap))	-	250	-
TABLE-1 (Clause-4)(SILICON)	-	250	-
TABLE-1 (Clause-4)( ALUMINIUM)	-	250	-
TABLE-1 (Clause-4)(NITROGEN)	-	500	-
TABLE-1 (Clause-4)(VANADIUM)	-	500	-
TABLE-1 (Clause-4)(NIOBIUM)	-	500	-
TABLE-1 (Clause-4)(TITANIUM)	-	500	-
Clause 4 Table 1(Carbon ( Pin))	-	250	-
Clause 4 Table 1(Sulphur ( Pin))	-	250	-
Clause 4 Table 1(Phosphorus ( Pin))	-	250	-
Clause 4 Table 1(Manganese ( Pin))	-	250	-
TABLE-1 (Clause-4)(Chromium)	-	250	-
TABLE-1 (Clause-4)(Nickel)	-	250	-
TABLE-1 (Clause-4)(Molybdenum)	-	250	-
Clause 4 Table 1(Carbon ( Flap))	-	250	-
Clause 4 Table 1(Phosphorus ( Flap))	-	250	-
Clause 4 Table 1(Nitrogen ( Flap))	-	500	-
6.1(General)	-	250	-
6.2.1(Knuckles)	-	250	-
5.1 Tables 2 to 9 (2)(Size of Hinge)	-	250	-
5.1 Tables 2 to 9 (3)(Length A)	-	250	-
5.1 Tables 2 to 9 (4)(Breadth B)	-	250	-
5.1 Tables 2 to 9 (4)(Breadth B1)	-	250	-
5.1 Tables 2 to 9 (4)(Breadth B2)	-	250	-
5.1 Tables 2 to 9 (5)(Thickness of Flap C)	-	250	-
5.1 Tables 2 to 9 (6)(Diameter of Hinge Pin D)	-	250	-
5.1 Tables 2 to 9 (7)(Number of Knuckles)	-	250	-
5.1 Tables 2 to 9 (8)(Number of Screw Holes)	-	250	-
5.1 Tables 2 to 9 (9)(Holes for Screw No.)	-	250	-
6.3(Pins)	-	250	-
6.4(Screw Holes)	-	250	-
7(Finish)	-	250	-
8(Marking)	-	250	-
6.4.2(Position of Holes)	-	500	-

-
-

13606

MATERIAL TESTING LABORATORY LLP

8176306

IS 513 : Part 2 (2016)

Cold reduced carbon steel sheet and strip: Part 2 high tensile and multi - Phase steel (Sixth Revision)

All Grades

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(CARBON)	-	250	-
6.0(SULPHUR)	-	250	-
6.0(PHOSPHORUS)	-	250	-
6.0(MANGANESE)	-	250	-
6.0(SILICON)	-	250	-
6.0(MICRO ALLOYS)	-	0	-
6.0(ALUMINIUM)	-	250	-
6.0(NITROGEN)	-	500	-
Cl 7(UTM)	-	1500	-
Cl. 7.2 Table 7(Bend Test)	-	500	-
Cl 10(Length, Width & Thickness)	-	500	-
Cl. 8.5.3 Table 6(Surface Roughness)	-	1000	-
Cl. 7.3 Table 4A & 4B(Tensile Strain Hardening)	-	1000	-
9(Freedom from defects)	-	500	-
12(Marking and Packing)	-	500	-
7.0 & table 3(Chromium as Cr)	-	250	-
7.0 & table 3(Nickel as Ni)	-	250	-
7.0 & table 3(Molybdenum as Mp)	-	250	-
7.0 & table 3(Vanadium as V)	-	250	-
7.0 & table 3(Titanium as Ti)	-	250	-
7.0 & table 3(Niobium as Nb)	-	250	-
7.0 & table 3(Boron as B)	-	250	-
8.6(Oiling)	-	250	-
Cl. 10(Out of square)	-	250	-
Cl. 10(Flatness)	-	250	-
Cl. 10(Camber)	-	250	-

-
Scope restricted to Sheets and Strips thickness greater than or equal to 0.5 mm

13607

MATERIAL TESTING LABORATORY LLP

8176306

IS 513 : Part 1 (2016)

Cold reduced carbon steel sheet and strip: Part 1 cold forming and drawing purpose (Sixth Revision)

All Grades

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.0(CARBON)	-	250	-
7.0(SULPHUR)	-	250	-
7.0(PHOSPHORUS)	-	250	-
7.0(MANGANESE)	-	250	-
7.0(SILICON)	-	250	-
7(Chemical Composition)	-	0	-
7.0(ALUMINIUM)	-	500	-
7.0(NITROGEN)	-	500	-
Cl 8(UTM)	-	500	-
Cl. 8.1 & Table 5A, 5B & 5C(Yield Stress)	-	500	-
Cl. 8.1 & Table 5A, 5B & 5C(Elongation at 50 mm gauge length)	-	500	-
Cl. 8.2(Cupping Test(Only for sheet and coils CR2, CR3, CR4(having thickness 0.5 mm-2.0 mm))	-	1000	-
Cl. 8.3 Table 6(Hardness Test ( Only for CR0 & CR1))	-	500	-
Cl. 8.4(Bend Test)	-	500	-
7.0(MICRO ALLOYS)	-	2000	-
Cl 11(Length, Width & Thickness)	-	500	-
8.5(Plastic strain ratio)	-	1000	-
8.6(Tensile strain Hardening component)	-	1000	-
8.7(Black Hardening Index)	-	1000	-
9(Surface finish)	-	250	-
10(Freedom from defects)	-	250	-
13(Marking)	-	250	-
Cl. 11(Out of square)	-	250	-
Cl. 11(Flatness)	-	250	-
Cl. 11(Camber)	-	250	-

-
Scope Restricted to Sheets and Strips thickness greater than or equal to 0.5 mm, Grades all other than CR2, CR3, CR4, of thickness from 0.5 mm upto 2.0 mm, ISC390B, ISC360B, ISC320B, ISC300B, ISC270B, ISC340B and ISC440B.

13608

MATERIAL TESTING LABORATORY LLP

8176306

IS 7887 (1992)

Mild steel wire rod for general engineering purposes - Specification (First Revision)

All Grades and sizes

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Carbon %)	-	250	-
6.1(Manganese %)	-	250	-
6.1(Silicon %)	-	250	-
6.1(Sulphur %)	-	250	-
6.1(Phosphorus %)	-	250	-
Cl 9(Nominal Diameter & Out Of Shape)	-	500	-
Cl 8(Workmanship)	-	0	-
Cl 8(Freedom from defects)	-	500	-
Amendment 1(Niobium)	-	500	-
Amendment 1(Vanadium)	-	500	-
Amendment 1(Titanium)	-	500	-
6.1( Aluminium %)	-	500	-
Table 1 Note 3(Copper)	-	250	-
11(Marking)	-	500	-
9.1(Diameter - SOP-MT-23)	-	250	-
9.3(Out of Shape - SOP-MT-23)	-	250	-

-
-

13609

MATERIAL TESTING LABORATORY LLP

8176306

IS 1079 (2017)

Hot rolled carbon steel sheet, plate and strip - Specification (Seventh Revision)

All grades

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Phosphorus %)	-	250	-
6.1(Carbon %)	-	250	-
6.1(Manganese %)	-	250	-
6.1(Silicon %)	-	250	-
6.1(Sulphur %)	-	250	-
6.1( Copper %)	-	250	-
6.1(V)	-	500	-
6.1( Ti)	-	500	-
6.1( Aluminium %)	-	500	-
6.1( Nitrogen%)	-	500	-
Cl. 8.3, Cl. 8.3.1 Table 5 and Table 6(Percentage Elongation After Fracture at 5.65√A Gauge length)	-	500	-
Cl. 8.3, Cl. 8.3.1 Table 6(0.2% Proof Stress/Yield Stress)	-	500	-
Cl. 8.3, Cl. 8.3.1 Table 5 and Table 6(Percentage Elongation After Fracture at 80 mm Gauge length)	-	500	-
Cl 9(Press)	-	0	-
Cl 10(Die Press)	-	0	-
8, Table 5 & 6(Elongation)	-	500	-
8, Table 5 & 6(Yield Strength)	-	500	-
8, Table 5 & 6(Tensile Strength)	-	500	-
9(Bend test)	-	500	-
Clause 10(Cuppping Test)	-	2000	-
6.1( Nb)	-	500	-
Clause 7, Table 3, Note 1(Boron)	-	500	-
Clause 12(Freedom from defect)	-	500	-
Cl 13(Length, Width & Thickness)	-	500	-
16(Marking and packing)	-	500	-
Cl.13(Camber)	-	500	-
Cl.13(Out of square)	-	500	-
Cl.13(Flatness)	-	500	-

-
Scope restricted to Plates, Sheets and Strips of thickness upto 10 mm

13610

MATERIAL TESTING LABORATORY LLP

8176306

IS 11513 (2017)

Hot rolled carbon steel strip for cold rolling purposes - Specification (Second Revision)

All Grades

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Carbon %)	-	250	-
6.1(Manganese %)	-	250	-
6.1(Phosphorus %)	-	250	-
6.1(Sulphur %)	-	250	-
6.1(Silicon %)	-	250	-
6.1( Copper %)	-	250	-
6.1( Aluminium %)	-	250	-
6.1( Nb)	-	500	-
6.1(V)	-	500	-
6.1( Ti)	-	500	-
6.1(Boron)	-	500	-
6.1( Nitrogen%)	-	500	-
Cl.9(Width)	-	250	-
Cl.9(Thickness)	-	250	-
Cl. 9.3(Crown)	-	500	-
Cl. 9.5(Edge Camber)	-	250	-
Cl 8(Workmanship)	-	250	-
12(Marking)	-	250	-
Cl.9.3.1(Difference in Thickness)	-	250	-
Cl. 10(Weight)	-	250	-
Cl 9(Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width )	-	1750	Break-wise rate all ready mention.

-
Scope restricted to all other than Strips of thickness more than 10 mm.

13611

MATERIAL TESTING LABORATORY LLP

8176306

IS 432 : Part 2 (1982)

Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 2 Hard-Drawn Steel Wire

All Grades

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 3.1.1(Sulphur)	-	250	-
Clause 3.1.1(Phosphorus)	-	250	-
Clause 7.1(Ultimate Tensile Stress)	-	500	-
Cl. 7.1(Proof Stress 0.2 %)	-	500	-
Cl. 7.1(Elongation)	-	500	-
Cl 5 & 6(Diameter)	-	500	-
Clause 3(Nitrogen)	-	500	-
Clause 8.3(Reverse Bend test)	-	500	-
Cl 4.1(Workmanship)	-	500	-
10(Marking)	-	500	-
Cl. 6.2(Length)	-	500	-

-
-

13612

MATERIAL TESTING LABORATORY LLP

8176306

IS 432 : Part 1 (1982)

Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild Steel and Medium Tensile Steel Bars

All Grades

3150 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause -4, 4.1( CARBON)	-	200	-
Clause -4, 4.1(SULPHUR)	-	200	-
Clause -4, 4.1(PHOSPHURS)	-	200	-
Clause -4, 4.1(MANGANESE)	-	200	-
Clause -4, 4.1(SILICON)	-	200	-
Clause -4, 4.1(NITROGEN)	-	200	-
Clause -4, 4.2(VANADIUM)	-	200	-
Clause -4, 4.1(NIOBIUM)	-	200	-
Clause -4, 4.1(Chromium)	-	200	-
Clause -4, 4.1(Nickel)	-	200	-
Clause -4, 4.1(Molybdenum)	-	200	-
Cl 8.1(ultimate tensile stress, yield stress and percentage elongation)	-	500	-
Clause 8.1(Elongation)	-	500	-
Clause 8.1(Yield Stress)	-	0	-
Cl 8.2(Bend test)	-	250	-
Clause -4, 4.3(TITANIUM)	-	200	-
Clause 6.1(Size)	-	100	-
Cl 6.2(Diameter & Ovality)	-	100	-
Cl 6.2(Weight)	-	100	-
Clause 5.1(Freedom from Defect)	-	100	-
11(Marking)	-	100	-

-
Scope Restricted to Bars of Diameter upto 25 mm

13613

MATERIAL TESTING LABORATORY LLP

8176306

IS 410 (1977)

Specification for cold rolled brass sheet, strip and foil (Third Revision)

All Grades

2250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1 Table-1(Zn)	-	200	-
6.1 Table-1(Cu)	-	200	-
6.1 Table-1(Pb)	-	200	-
6.1 Table-1(Fe)	-	200	-
7.1.1(Tensile Test)	-	500	-
Table-2(Elongation)	-	500	-
Table-2(Vickers Hardness)	-	100	-
Table-2(Transverse Bend)	-	100	-
Table-2(Longitudinal Bend)	-	100	-
Table-2(Thickness)	-	100	-
4.0(Freedom from defects)	-	100	-
6.1 Table-1(Total impurities including iron)	-	200	-
7.1.1(Erichsen cupping values -IS 410)	-	150	-
7.1.5(Grain Size - IS 410)	-	100	-
8(Dimensions -IS 410)	-	100	-
11(Marking)	-	100	-

-
Scope Restricted to Sheets, Strips and Foils of thickness greater than or equal to 0.5 mm

13614

MATERIAL TESTING LABORATORY LLP

8176306

IS 319 (2007)

Free cutting brass bars, rods and section - Specification (Fifth Revision)

All Grades

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1 Table 1(Zn)	-	500	-
8.1 Table 1(Cu)	-	500	-
8.1 Table 1(Pb)	-	500	-
8.1 Table 1(Fe)	-	500	-
10.1(Mercurous Nitrate Test)	-	1500	-
7.0(Dimension and Tolerances)	-	500	-
9.1 Table-2(Tensile Strength)	-	1000	-
9.1 Table-2(Elongation)	-	500	-
9.2(Vickers Hardness)	-	500	-
5.0(Freedom from defects)	-	250	-
8.1 Table 1(Total other impurities excluding iron)	-	500	Other impurities do no preclude presence of other unnamed elements(Ni or Ag).
14(Marking)	-	250	-

-
Scope Restricted to Bars, Rods and Sections of diameter/size upto 25 mm

13615

MATERIAL TESTING LABORATORY LLP

8176306

IS 10748 (2004)

Hot - Rolled steel strip for welded tubes and pipes - Specification (Second Revision)

All grades

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Carbon %)	-	250	-
7.1(Sulphur %)	-	250	-
7.1(Phosphorus %)	-	250	-
7.1(Manganese %)	-	250	-
7.1(Silicon %)	-	250	-
Table 1 ( Clauses 7.1 ,7.2 )(Chromium)	-	250	-
7.1(Ni)	-	250	-
7.1(Mo)	-	250	-
7.1( Copper %)	-	250	-
7.1( Nitrogen%)	-	500	-
7.1(V)	-	500	-
7.1( Ti)	-	500	-
7.1( Nb)	-	500	-
Cl. 8, Table 3(Elongation)	-	500	-
Cl 8 & Table 3(UTM)	-	500	-
Cl. 8, Table 3(Yield Stress)	-	500	-
Cl 9(Press)	-	500	-
Cl 12 & 13(Length, Width & Thickness)	-	500	-
Cl. 12, 13(Camber)	-	250	-
Cl 11(Workmanship)	-	250	-
Cl. 14(Weight)	-	250	-
15(Condition of Coil)	-	250	-
16(Marking)	-	250	-
15.0 & 15.1(Coil edges - IS:10748)	-	250	-
15.0 & 15.2(Surface finish - IS:10748)	-	250	-
15.0 & 15.5(Telescopicity - IS:10748)	-	250	-

-
Scope restricted to all other than Sheets and Strips of thickness more than 10 mm.

13616

MATERIAL TESTING LABORATORY LLP

8176306

IS 2062 (2011)

Hot rolled medium and high tensile structural steel - Specification (Seventh Revision)

All Grades

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause - 5, 8.1 & 8.2(E550, CARBON)	-	250	-
Clause - 5, 8.1 & 8.2(E650, SULPHUR)	-	250	-
Clause - 5, 8.1 & 8.2(E550, PHOSPHURS)	-	250	-
Clause - 5, 8.1 & 8.2(E650 ,MANGANESE)	-	250	-
Clause - 5, 8.1 & 8.2(E600, SILICON)	-	250	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Clause - 5, 8.1 & 8.2(E600, NITROGEN)	-	500	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl 10.3(UTM)	-	500	-
Cl. 10.3 (Cl. 10.3 (Elongation %))	-	500	-
Cl. 10.3 (Cl. 10.3 (Yield Stress))	-	500	-
Cl 12(Sudden Load Applied)	-	500	-
Clause 11.3(IS 1599)	-	500	-
Clause 12(IS 1757)	-	500	-
Clause - 5, 8.1 & 8.2(E650, CARBON +EQUIVELENT )	-	250	-
20(MARKING)	-	250	-
16(Tolerance)	-	250	-
Clause 15, Table 4(IS 2062)	-	500	-
Cl 13(Y Groove Cracking Test)	-	0	-
14.1(Soundness test)	-	0	-
14.2(Grain Size)	-	0	-
Clause 7(IS 2062)	-	250	-
9(Preparation of test sample)	-	500	-

-
Exclusion: Cl. 13 (Y Groove Cracking Test), Cl.4.1 (Soundness test), Cl.14.2 (Inclusion) Scope restricted to all other than Plates, Sheets and Strips of thickness greater than 10 mm, Round/Square Bars of Diameter/ Nominal Size greater than 25 mm, All other sections as covered under Table 4 of IS 2062 i.e. Beams, Channels, Angels, Sheet piles , columns, tee bars, Bulb Flats, Track Shoe Section.

13617

MATERIAL TESTING LABORATORY LLP

8176306

IS 2831 (2012)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into structural steel (Ordinary Quality) - Specification (Fourth Revision)

All Grades

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1, Table 1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl. 6.1, Table 1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl. 6.1, Table 1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl. 6.1, Table 1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl. 6.1, Table 1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Table 1 Note 2(Any Instrumental Method/Chemical Method)	-	250	-
Table 1 Note 2(Any Instrumental Method/Chemical Method)	-	250	-
Cl. 6.1, Table 1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl. 6.1, Table 1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 6.1, Table 1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 6.1, Table 1(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 6.1, Table 1(Niobium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 6.1, Table 1(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
10.1.a)( Macro examination IS 11371)	-	2000	-
10.1.b)( Sulphur print tests IS 12037)	-	2000	-
11(Dimensions)	-	250	-
10.2(Bend)	-	500	-
10.3(Chamber)	-	500	-
11 & 12(DIMENSIONS and Tolerances)	-	0	-
9( FREEDOM FROM DEFECTS)	-	250	-
13(Marking)	-	125	-
8(Selection of Test sample)	-	125	-

-
-

13618

MATERIAL TESTING LABORATORY LLP

8176306

IS 2830 (2012)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purposes - Specification (Third Revision)

All grades

10995 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 11(Length, Width & Thickness)	-	500	-
6.1(Carbon %)	-	250	-
6.1(Manganese %)	-	250	-
6.1(Silicon %)	-	250	-
6.1(Sulphur %)	-	250	-
6.1(Phosphorus %)	-	250	-
6.1(Ni)	-	250	-
6.1(Cr)	-	250	-
6.1(Mo)	-	250	-
6.1( Copper %)	-	250	-
6.1(V)	-	500	-
6.1( Ti)	-	500	-
Cl. 10.1 (b)(Sulphur Print)	-	3000	-
6.1( Aluminium %)	-	250	-
6.1( Nitrogen%)	-	250	-
6.1( Nb)	-	500	-
Cl. 10.1 (a)(Macro Examination)	-	3000	-
Clause 6, Table 1 Note : 1(By Calculation)	-	250	-
Clause 10.3(Camber)	-	500	-
Cl. 10.2(Bend)	-	500	-
Cl 9(Workmanship)	-	0	-
Cl 11(Length, Width & Thickness)	-	0	-
8(Selection of Test samples)	-	250	-
12(Tolerance - IS 2830)	-	0	-
13(Marking)	-	250	-

-
-

13619

BIS, Central Laboratory (CL)

None

IS 15603 (2005)

Alphacypermethrin, WP - Specification

Rs.7580/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2.1 (Description)	-
3.2.2 (Sieving Requirements)	-
3.2.3 (Suspensibility Test)	-
3.2.4 (Wettability)	-
3.3.2 (Acidity or Alkalinity)	-

-
Excluding Cl 3.3.1 Content

13620

BIS, Eastern Regional Laboratory (ERL)

None

IS 3818 (1992)

Continuous (Piano) hinges -Specification

Rs 1500/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4-Fig 1 (DIMENSIONS AND TOLERANCES-Nominal Size)	-
4-Fig 1 (DIMENSIONS AND TOLERANCES-B)	-
4-Fig 1 (DIMENSIONS AND TOLERANCES-C)	-
4-Fig 1 (DIMENSIONS AND TOLERANCES-D)	-
4-Fig 1 (DIMENSIONS AND TOLERANCES-T)	-
4-Fig 1 (DIMENSIONS AND TOLERANCES-CSK Screw No.)	-
4-Fig 1 (DIMENSIONS AND TOLERANCES-minimum distance of screw holes from the end of flap)	-
4-Fig 3 (DIMENSIONS AND TOLERANCES-B)	-
4-Fig 3 (DIMENSIONS AND TOLERANCES-B1)	-
4-Fig 3 (DIMENSIONS AND TOLERANCES-B2)	-
4-Fig 3 (DIMENSIONS AND TOLERANCES-C)	-
4-Fig 3 (DIMENSIONS AND TOLERANCES-D)	-
4-Fig 3 (DIMENSIONS AND TOLERANCES-T)	-
4-Fig 3 (DIMENSIONS AND TOLERANCES-CSK Screw No.)	-
5.1 (CARBON)	-
5.1 (PHOSPHORUS)	-
5.1 (MANGANESE)	-
5.1 (SILICON)	-
5.1 (ALUMINIUM)	-
5.1 (SULPHUR)	-
5.1 (COPPER)	-

-
Excluding micro alloy (B, Nb,V, Ti)

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number