| 13621 |
BIS, Central Laboratory (CL)
| None
| IS 3626 (2001) |
Locked coil winding ropes - Specification (Second Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.3-Table-1 (Carbon - IS 1835) |
- |
|
|
|
| 5.3-Table-1 (Sulphur - IS 1835) |
- |
|
|
|
| 5.3-Table-1 (Phosphorur - IS 1835) |
- |
|
|
|
| 5.3-Table-1 (Manganese - IS 1835) |
- |
|
|
|
|
- |
-
- |
| 13622 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 13098 (2012) |
Automotive vehicles - Tubes for pneumatic tyres - Specification (First Revision) |
- |
Total Resting Charges : Rs. 13,050.00 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3/3.3 (Uniformity(The Thickness shall not vary from the arithmetic mean of the readings by ± 17.5 % at any point in longitudinal direction :-Crown centre,Base centre,Side wall - 1,Side wall - 2)) |
- |
|
|
|
| 4/4.1.1 (Elongation at break (Class A' Tubes)) |
- |
|
|
|
| 4/4.1.1 (Elongation at break (Class B' Tubes)) |
- |
|
|
|
| 4/4.1.2 ( Strength of Splice (Class A' Tubes)) |
- |
|
|
|
| 4/4.1.2 ( Strength of Splice (Class B' Tubes)) |
- |
|
|
|
| 4/4.1.3 Refer annex B (Set After Ageing(Class A' Tubes)) |
- |
|
|
|
| 4/4.1.3 Refer annex B (Set After Ageing(Class B' Tubes)) |
- |
|
|
|
| 4/4.1.4 Refer annex C (Accelerated Ageing(Both Class A and Class B)) |
- |
|
|
|
| 3/3.1 (for valve refer IS 9081) (MATERIALS, FORM AND FIT) |
- |
|
|
|
| 5 (AIR TIGHTNESS) |
- |
|
|
|
|
- |
-
Remark 1: To carry out fit & form test type is required of the relevant size of tube. |
| 13623 |
BIS, Central Laboratory (CL)
| None
| IS 16145 (2013) |
Fipronil suspension concentrate (SC) - Specification |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.2.7 (pH of Suspension) |
- |
|
|
|
| 3.3.2 (Acidity/Alkalinity) |
- |
|
|
|
|
- |
-
- |
| 13624 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 15962 (2012) |
Structural steels for buildings and structures with improved seismic resistance |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Clauses 7, 8.1 & .2, Table- 1 (E250S, C) |
- |
|
|
|
| Clauses 7, 8.1 & .2, Table- 1 (E250S, Mn ) |
- |
|
|
|
| Clauses 7, 8.1 & .2, Table- 1 (E250S, P) |
- |
|
|
|
| Clauses 7, 8.1 & .2, Table- 1 (E250S, S) |
- |
|
|
|
| Clauses 7, 8.1 & .2, Table- 1 (E250S, Si) |
- |
|
|
|
|
- |
-
Test facilities are not available for the following:
1. Chemical Composition ( Cr, Mo, Ni, Al, Microalloying element, N, Cu) |
| 13625 |
BIS, Central Laboratory (CL)
| None
| IS 3589 (2001) |
Steel pipes for water and sewage (168.3 To 2540 Mm Outside Diameter) - Specification (Third Revision) |
- |
Please see remarks. View breakup
Rs.11800/- (for SAW pipe), Rs.10380/- for (ERW Fe410, Fe450 & Fe330)
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 8.1 Table 2 Table 3 (Carbon Content IS 228) |
- |
|
|
|
| 8.1 Table 2 Table 3 (Sulphur Content IS 228) |
- |
|
|
|
| 8.1 Table 2 Table 3 (Phosphorus Content IS 228) |
- |
|
|
|
| 8.1 Table 2 Table 3 (Manganese Content IS 228) |
- |
|
|
|
| 9.3 (Guided bend test(For SAW Pipes)) |
- |
|
|
|
| 10 (Hydaulic pressure test) |
- |
|
|
|
| 11.1, Table 5. (Outside Diameter (OD)) |
- |
|
|
|
| 11.1, Table 5. (Thickness) |
- |
|
|
|
| 12.3.3 (Ovality) |
- |
|
|
|
| 12.5 (Strightness) |
- |
|
|
|
| 14.1 (Visual inspection, Appearance and Workmanship) |
- |
|
|
|
| 14.2 (Visual inspection, Appearance and Workmanship) |
- |
|
|
|
| 14.3 (Visual inspection, Appearance and Workmanship) |
- |
|
|
|
| 14.4 (Visual inspection, Appearance and Workmanship-Dent Depth(below 610 mm OD)) |
- |
|
|
|
| 14.4 (Visual inspection, Appearance and Workmanship-Dent Depth(Above 610 mm OD)) |
- |
|
|
|
| 14.4 (Visual inspection, Appearance and Workmanship-Dent Length) |
- |
|
|
|
| 8.1 (CE) |
- |
|
|
|
|
- |
-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;
Excluding -; Hydrostatic test (Cl 10), Mass ( Cl 11.1.1 ) (Above 508 mm dia )pipe Outside Diameter, Thickness and height of internal bead or reinforcement ( Cl 12.3 )(Above 508 mm dia ) |
| 13626 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 12586 (1988) |
Brazed low carbon steel gas cylinders not exceeding 13 litre water capacity - Specification |
- |
Rs 8670/- View breakup
Rs 8670/- + charges as per relevant ISS excluding material test.
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.4 (Water capacity) |
- |
|
|
|
| 9 (Leakage Test) |
- |
|
|
|
| 11,1.1.1 (Tensile Test, IS 1608(P1)) |
- |
|
|
|
| 11,1.1.2 (Bend test) |
- |
|
|
|
| 11.2.1 ( Tensile Test of Brazed Joint) |
- |
|
|
|
| 11.2.2 ( Peel Test ,Annex E) |
- |
|
|
|
| 11.3 ( Minimum Thickness Test) |
- |
|
|
|
| 6.3.4 (Straightness) |
- |
|
|
|
|
- |
-
Test facilities are not available for the following: a) Peel Test |
| 13627 |
BIS, Central Laboratory (CL)
| None
| IS 9471 : Part 4 (1980) |
Specification for modular lower limb orthotic components: Part 4 joint unit, ankle |
- |
Rs.2850/ View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1 (Dimensions. L(±0.5)) |
- |
|
|
|
| 3.2 (Overall Dimensions. Fig. 1) |
- |
|
|
|
| 3.3 (In the case of free motion, limited motion and foot drop ankle joint unit, the inside (medical) joints shall be contoured to 15 f l”, as shown in Fig. 2 and the outside ( lateral) joints shall be straight, mm) |
- |
|
|
|
| 3.4 (Depth of Slot) |
- |
|
|
|
| 3.4.1 (Free motion (Type 1 )) |
- |
|
|
|
| 3.4.2 (Limited motion ( Type 2)) |
- |
|
|
|
| 3.4.3 (Foot drop ( Type 3)) |
- |
|
|
|
| 3.4.4 (Double acfion ( Type 4 )) |
- |
|
|
|
| 3.5 (Screw shall conform to designation M5 A 10 of IS : 6761-1972 ‘Specification for countersunk head screws with hexagon socket ‘) |
- |
|
|
|
| 4.6 (6 The rivet shall be manufactured from a suitable aluminium alloy.) |
- |
|
|
|
| 5.1 ( Workmanship and Finish) |
- |
|
|
|
| Cl.4.1 of IS 9471(Part-4) & IS 6911 (Carbon- Relevant parts of IS 228 or by other instrumental and chemical method) |
- |
|
|
|
| Cl.4.1 of IS 9471(Part-4) & IS 6911 (Sulphur- Relevant parts of IS 228 or by other instrumental and chemical method) |
- |
|
|
|
| Cl.4.1 of IS 9471(Part-4) & IS 6911 (Phosphorus- Relevant parts of IS 228 or by other instrumental and chemical method) |
- |
|
|
|
| Cl.4.1 of IS 9471(Part-4) & IS 6911 (Manganese- Relevant parts of IS 228 or by other instrumental and chemical method) |
- |
|
|
|
| Cl.4.1 of IS 9471(Part-4) & IS 6911 (Nitrogen- Relevant parts of IS 228 or by other instrumental and chemical method) |
- |
|
|
|
|
- |
-
- |
| 13628 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 14735 (1999) |
Unplasticized Polyvinyl Chloride (UPVC) Injection Moulded Fittings for Soil and Waste Discharge System for Inside and Outside Buildings Including Ventilation and Rain Water System - |
- |
Total Testing Charges : Rs. 9970.00 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl.13, IS 12235 (P-7)-2004, (Resistance to Sulphuric Acid) |
- |
|
|
|
| Cl.14, Annex A (Titanium Di-Oxide Content) |
- |
|
|
|
| Cl.15, Annex B (Sulphated Ash Content) |
- |
|
|
|
| 7.1,Table 1 (Wall thickness) |
- |
|
|
|
| 7.2 ,Table 2&3 (Socket Dimensions) |
- |
|
|
|
| 7.3 (Dimensions of waste trap(Nahani Trap) |
- |
|
|
|
| 8 (Sealing Rings) |
- |
|
|
|
| 11.4,Table 5 (Vent cowl) |
- |
|
|
|
| 12.2 (Stress relief test) |
- |
|
|
|
| 12.3 (Vicat softening tempewrature) |
- |
|
|
|
| 16.1 (Impact test) |
- |
|
|
|
| 17 (Watet tightness of joint) |
- |
|
|
|
| Cl 12.4 (Effect on Water Lead (first extraction)) |
- |
|
|
|
| Cl 12.4 (Effect on Water Lead (third extraction)) |
- |
|
|
|
| Cl 12.4 (Effect on Water Dialkyl tin C4 and higher homologues(measured as tin )(third extraction )) |
- |
|
|
|
| Cl 12.4 (Effect on Water Cadmium (mean of first extraction, second extraction and third extraction)) |
- |
|
|
|
| Cl 12.4 (Effect on Water Mercury (mean of first extraction, second extraction and third extraction)) |
- |
|
|
|
|
- |
-
Remark : a sealing ring-prepared button piece is required to measure the IRHD harness. |
| 13629 |
BIS, Central Laboratory (CL)
| None
| IS 16240 (2015) |
Reverse osmosis (RO) based point-of-use (POU) water treatment system - Specification |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Table 1 Cl.6.3.3 and Cl.6.3.4 (E.coli (IS 10500)) |
- |
|
|
|
| 6.3.1 (TDS Reduction (IS 3025 Part 16)) |
- |
|
|
|
| Table 1 Cl.6.3.3 and Cl.6.3.4 (Arsenic (IS 025 Part 37)) |
- |
|
|
|
| Table 1 Cl.6.3.3 and Cl.6.3.4 (Cadmium (IS 025 Part 41)) |
- |
|
|
|
| Table 1 Cl.6.3.3 and Cl.6.3.4 (Chromium (IS 025 Part 52)) |
- |
|
|
|
| Table 1 Cl.6.3.3 and Cl.6.3.4 (Copper (IS 025 Part 42)) |
- |
|
|
|
| Table 1 Cl.6.3.3 and Cl.6.3.4 (Fluoride (IS 025 Part 60)) |
- |
|
|
|
| Table 1 Cl.6.3.3 and Cl.6.3.4 (Lead (IS 025 Part 47)) |
- |
|
|
|
| Table 1 Cl.6.3.3 and Cl.6.3.4 (Mercury (IS 025 Part 48)) |
- |
|
|
|
| Table 1 Cl.6.3.3 and Cl.6.3.4 (Nitrate (IS 025 Part 34)) |
- |
|
|
|
| Table 1 Cl.6.3.3 and Cl.6.3.4 (Iron (IS 025 Part 53)) |
- |
|
|
|
| Table 1 Cl.6.3.3 and Cl.6.3.4 (Pesticides Total (IS 10500)) |
- |
|
|
|
|
- |
-
- |
| 13630 |
BIS, Central Laboratory (CL)
| None
| IS 3431 (1982) |
Specification for steel for the manufacture of volute helical and laminated springs for automotive suspension (Second Revision) |
- |
Rs 1800/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl. 2.1, 5.1 & Table 1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 2.1, 5.1 & Table 1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 2.1, 5.1 & Table 1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 2.1, 5.1 & Table 1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| 8,Table 4 (Mechanical properties - IS 3431) |
- |
|
|
|
| 10 (Freedom from defects) |
- |
|
|
|
| 12 (Straightness) |
- |
|
|
|
| 13, Table 5&Table 6 (Dimensions and Tolerance) |
- |
|
|
|
|
- |
-
- |
| 13631 |
BIS, Central Laboratory (CL)
| None
| IS 1341 (2018) |
Steel Butt Hinges - Specification (Sixth Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1 Tables 2 to 9 (3) (Length A) |
- |
|
|
|
| 5.1 Tables 2 to 9 (4) (Breadth B) |
- |
|
|
|
| 5.1 Tables 2 to 9 (4) (Breadth B1) |
- |
|
|
|
| 5.1 Tables 2 to 9 (4) (Breadth B2) |
- |
|
|
|
| 5.1 Tables 2 to 9 (5) (Thickness of Flap C) |
- |
|
|
|
| 5.1 Tables 2 to 9 (6) (Diameter of Hinge Pin D) |
- |
|
|
|
| 6.4.2 (X) |
- |
|
|
|
| 6.4.2 (Y) |
- |
|
|
|
| 6.4.2 (Z) |
- |
|
|
|
| 6.1 (General) |
- |
|
|
|
| 5.1 Tables 2 to 9 (7) (Number of Knuckles) |
- |
|
|
|
| 5.1 Tables 2 to 9 (8) (Number of Screw Holes) |
- |
|
|
|
| 6.2.1 (Knuckles) |
- |
|
|
|
| 6.3 (Pins) |
- |
|
|
|
| 6.4 (Screw Holes) |
- |
|
|
|
| 6.4.2 (Position of Holes) |
- |
|
|
|
| 7 (Finish) |
- |
|
|
|
| TABLE-1 (Clause-4) ( CARBON) |
- |
|
|
|
| TABLE-1 (Clause-4) (SULPHUR) |
- |
|
|
|
| TABLE-1 (Clause-4) (PHOSPHURS) |
- |
|
|
|
| TABLE-1 (Clause-4) (MANGANESE) |
- |
|
|
|
| TABLE-1 (Clause-4) (SILICON) |
- |
|
|
|
| TABLE-1 (Clause-4) ( ALUMINIUM) |
- |
|
|
|
| TABLE-1 (Clause-4) (NITROGEN) |
- |
|
|
|
|
- |
-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm; |
| 13632 |
BIS, Central Laboratory (CL)
| None
| IS 9471 : Part 3 (1980) |
Specification for modular lower limb orthotic components: Part 3 stirrup plates |
- |
Rs. 1959/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 2 (Shape and Dimensions. Size: 1. L ± 3) |
- |
|
|
|
| 2 (Shape and Dimensions. Size: 1. W1 ± 3) |
- |
|
|
|
| 2 (Shape and Dimensions. Size: 1. W2 ± 2) |
- |
|
|
|
| 2 (Shape and Dimensions. Size: 1. W+0.33-0) |
- |
|
|
|
| 3.1 (Thickness) |
- |
|
|
|
| 4.1 (Fabrication) |
- |
|
|
|
| 5 (Workmanship and Finish) |
- |
|
|
|
| Cl.3.1 of IS 9471(Part-3) & IS 1079 (Carbon- Relevant parts of IS 228 or by other instrumental and chemical method) |
- |
|
|
|
| Cl.3.1 of IS 9471(Part-3) & IS 1079 (Sulphur- Relevant parts of IS 228 or by other instrumental and chemical method) |
- |
|
|
|
| Cl.3.1 of IS 9471(Part-3) & IS 1079 (Phosphorus- Relevant parts of IS 228 or by other instrumental and chemical method) |
- |
|
|
|
| Cl.3.1 of IS 9471(Part-3) & IS 1079 (Manganese- Relevant parts of IS 228 or by other instrumental and chemical method) |
- |
|
|
|
| Cl.3.1 of IS 9471(Part-3) & IS 1079 (Nitrogen- Relevant parts of IS 228 or by other instrumental and chemical method) |
- |
|
|
|
| Cl.3.2 of IS 9471(Part-3) & IS 1079 (Carbon- Relevant parts of IS 228 or by other instrumental and chemical method) |
- |
|
|
|
| Cl.3.1 of IS 9471(Part-3) & IS 1079 (Sulphur- Relevant parts of IS 228 or by other instrumental and chemical method) |
- |
|
|
|
| Cl.3.2 of IS 9471(Part-3) & IS 1079 (Phosphorus- Relevant parts of IS 228 or by other instrumental and chemical method) |
- |
|
|
|
| Cl.3.2 of IS 9471(Part-3) & IS 1079 (Manganese- Relevant parts of IS 228 or by other instrumental and chemical method) |
- |
|
|
|
| Cl.3.2 of IS 9471(Part-3) & IS 1079 (Nitrogen- Relevant parts of IS 228 or by other instrumental and chemical method) |
- |
|
|
|
|
- |
-
- |
| 13633 |
BIS, Central Laboratory (CL)
| None
| IS 3319 (1995) |
Blades, surgical, detachable (Bard Parker Type) and handles - Specification (Fourth Revision) |
- |
Rs.1650/- View breakup
For physical tests(Excluding Sterility Test) Rs 2860/- for chemical tests Carbon Steel Blade Rs. 3360/- for chemical tests Stainless steel blade & Rs. 3360/- for chemical tests for Handle
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5,5.1 & 5.2; Table 1 (Shape and dimensions) |
- |
|
|
|
| 6,6.2 (Workmanship and Finish) |
- |
|
|
|
| 9.1 ( Visual Examination) |
- |
|
|
|
| 9.2 ( Performance Test) |
- |
|
|
|
| Clause -4, 4.1 ( CARBON) |
- |
|
|
|
| Clause -4, 4.1 (SULPHUR) |
- |
|
|
|
| Clause -4, 4.1 (PHOSPHURS) |
- |
|
|
|
| Clause -4, 4.1 (MANGANESE) |
- |
|
|
|
| Clause -4, 4.1 (SILICON) |
- |
|
|
|
| Clause -4, 4.1 ( ALUMINIUM) |
- |
|
|
|
| Clause -4, 4.1 (NITROGEN) |
- |
|
|
|
| Clause -4, 4.1 (Nickel) |
- |
|
|
|
| Clause -4, 4.1 (Chromium) |
- |
|
|
|
| Clause -4, 4.1 (Molybdenum) |
- |
|
|
|
| Clause -4, 4.1 (NIOBIUM) |
- |
|
|
|
| Clause -4, 4.1 (VANADIUM) |
- |
|
|
|
| Clause -4, 4.1 (TITANIUM) |
- |
|
|
|
|
- |
-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm; |
| 13634 |
BIS, Central Laboratory (CL)
| None
| IS 302 : Part 2 : Sec 3 (2007) |
Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 3 electric iron (First Revision) |
- |
Rs.8330/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6 (Classification- IS 302-1 ) |
- |
|
|
|
| 6 (Classification- IS 302-1) |
- |
|
|
|
| 7.1 (Marking- IS 302-1) |
- |
|
|
|
| 7.1 (Marking- IS 302-1) |
- |
|
|
|
| 7.1 (Marking- IS 302-1) |
- |
|
|
|
| 7.1 (Marking- IS 302-1) |
- |
|
|
|
| 7.1 (Marking- IS 302-1) |
- |
|
|
|
| 7.1 (Marking- IS 302-1) |
- |
|
|
|
| 7.1 (Marking- IS 302-1) |
- |
|
|
|
| 7.1 (Marking- IS 302-1) |
- |
|
|
|
| 7.1 (Marking- IS 302-1) |
- |
|
|
|
| 7.3 (Marking- IS 302-1) |
- |
|
|
|
| 7.4 (Marking- IS 302-1) |
- |
|
|
|
| 7.6 (Marking- IS 302-1) |
- |
|
|
|
| 7.7 (Marking- IS 302-1) |
- |
|
|
|
| 7.8 (Marking- IS 302-1) |
- |
|
|
|
| 7.11 (Marking- IS 302-1) |
- |
|
|
|
| 7.12 (Marking- IS 302-1) |
- |
|
|
|
| 7.13 (Marking- IS 302-1) |
- |
|
|
|
| 7.14 (Marking- IS 302-1) |
- |
|
|
|
| 7.15 (Marking- IS 302-1) |
- |
|
|
|
| 7.101 (Marking) |
- |
|
|
|
| 8 ( Protection Against Electric Shock, IS 302-1) |
- |
|
|
|
| 10 (Power Input and Current, IS 302-1) |
- |
|
|
|
| 11 (Heating, IS 302-1) |
- |
|
|
|
| 11 (Heating, IS 302-1) |
- |
|
|
|
| 11 (Heating, IS 302-1) |
- |
|
|
|
| 11 (Heating, IS 302-1) |
- |
|
|
|
| 11 (Heating, IS 302-1) |
- |
|
|
|
| 11 (Heating, IS 302-1) |
- |
|
|
|
| 11 (Heating, IS 302-1) |
- |
|
|
|
| 11 (Heating, IS 302-1) |
- |
|
|
|
| 13 (Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1) |
- |
|
|
|
| 13 (Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1) |
- |
|
|
|
| 15.3 (Moisture Resistance, IS 302-1) |
- |
|
|
|
| 16 (Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1) |
- |
|
|
|
| 16 (Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1) |
- |
|
|
|
| 19.4 (Abnormal Operation, IS 302-1) |
- |
|
|
|
| 19.4 (Abnormal Operation, IS 302-1) |
- |
|
|
|
| 19.5 (Abnormal Operation, IS 302-1) |
- |
|
|
|
| 19.5 (Abnormal Operation, IS 302-1) |
- |
|
|
|
| 19.7 (Abnormal Operation) |
- |
|
|
|
| 19.9 (Abnormal Operation) |
- |
|
|
|
| 19.1 (Abnormal Operation) |
- |
|
|
|
| 19.101 (Abnormal Operation) |
- |
|
|
|
| 20.1 (Stability & Mechanical Hazards, IS 302-1) |
- |
|
|
|
| 20.2 (Stability & Mechanical Hazards, IS 302-1) |
- |
|
|
|
| 21.1 (Mechanical Strength, IS 302-1) |
- |
|
|
|
| 21.2 (Mechanical Strength, IS 302-1) |
- |
|
|
|
| 21.101 (Mechanical Strength, IS 302-2-3) |
- |
|
|
|
| 22.101 (Construction) |
- |
|
|
|
| 22.102 (Construction) |
- |
|
|
|
| 22.103 (Construction) |
- |
|
|
|
| 22.104 (Construction) |
- |
|
|
|
| 22.105 (Construction) |
- |
|
|
|
| 22.106 (Construction) |
- |
|
|
|
| 22.107 (Construction) |
- |
|
|
|
| 23.1 (Internal Wiring, IS 302-1) |
- |
|
|
|
| 23.2 (Internal Wiring, IS 302-1) |
- |
|
|
|
| 23.3 (Internal Wiring, IS 302-1) |
- |
|
|
|
| 23.4 (Internal Wiring, IS 302-1) |
- |
|
|
|
| 23.5 (Internal Wiring, IS 302-1) |
- |
|
|
|
| 23.6 (Internal Wiring, IS 302-1) |
- |
|
|
|
| 23.7 (Internal Wiring, IS 302-1) |
- |
|
|
|
| 23.8 (Internal Wiring, IS 302-1) |
- |
|
|
|
| 23.9 (Internal Wiring, IS 302-1) |
- |
|
|
|
| 23.10 (Internal Wiring, IS 302-1) |
- |
|
|
|
| 24.1 (Components, IS 302-1) |
- |
|
|
|
| 24.2 (Components, IS 302-1) |
- |
|
|
|
| 24.4 (Components, IS 302-1) |
- |
|
|
|
| 25.1 (Supply Connection and External Flexible Cords, IS 302-1) |
- |
|
|
|
| 25.5 (Supply Connection and External Flexible Cords, IS 302-1) |
- |
|
|
|
| 25.6 (Supply Connection and External Flexible Cords, IS 302-1) |
- |
|
|
|
| 25.7 (Supply Connection and External Flexible Cords, IS 302-1) |
- |
|
|
|
| 25.8 (Supply Connection and External Flexible Cords, IS 302-1) |
- |
|
|
|
| 25.1 (Supply Connection and External Flexible Cords, IS 302-1) |
- |
|
|
|
| 25.11 (Supply Connection and External Flexible Cords, IS 302-1) |
- |
|
|
|
| 25.12 (Supply Connection and External Flexible Cords, IS 302-1) |
- |
|
|
|
| 25.13 (Supply Connection and External Flexible Cords, IS 302-1) |
- |
|
|
|
| 25.14 (Supply Connection and External Flexible Cords, IS 302-1) |
- |
|
|
|
| 25.14 (Supply Connection and External Flexible Cords, IS 302-1) |
- |
|
|
|
| 25.15 (Supply Connection and External Flexible Cords, IS 302-1) |
- |
|
|
|
| 25.16 (Supply Connection and External Flexible Cords, IS 302-1) |
- |
|
|
|
| 25.17 (Supply Connection and External Flexible Cords, IS 302-1) |
- |
|
|
|
| 25.18 (Supply Connection and External Flexible Cords, IS 302-1) |
- |
|
|
|
| 25.19 (Supply Connection and External Flexible Cords, IS 302-1) |
- |
|
|
|
| 25.2 (Supply Connection and External Flexible Cords, IS 302-1) |
- |
|
|
|
| 25.21 (Supply Connection and External Flexible Cords, IS 302-1) |
- |
|
|
|
| 25.22 (Supply Connection and External Flexible Cords, IS 302-1) |
- |
|
|
|
| 26 (Terminals for External Conductors, IS 302-1) |
- |
|
|
|
| 27.1 (Provision for Earthing, IS 302-1) |
- |
|
|
|
| 27.2 (Provision for Earthing, IS 302-1) |
- |
|
|
|
| 27.3 (Provision for Earthing, IS 302-1) |
- |
|
|
|
| 27.4 (Provision for Earthing, IS 302-1) |
- |
|
|
|
| 27.5 (Provision for Earthing, IS 302-1) |
- |
|
|
|
| 28 (Screws & Connections, IS 302-1) |
- |
|
|
|
| 29.1 (Clearances, Creepage distances and Solid Insulation, IS 302-1) |
- |
|
|
|
| 29.2 (Clearances, Creepage distances and Solid Insulation, IS 302-1) |
- |
|
|
|
| 30.1 (Resistance to Heat, Fire & Tracking, IS 302-1) |
- |
|
|
|
| 30.2 (Resistance to Heat, Fire & Tracking, IS 302-1) |
- |
|
|
|
| 31 (Resistance of Rusting, IS 302-1) |
- |
|
|
|
| 32 (Radiation, Toxicity and similar Hazard IS 302-1) |
- |
|
|
|
|
- |
-
Excluding electronic circuit type appliances(Cl.19.11 of IS 302 part 1) |
| 13635 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 5517 (1993) |
Steels for hardening and tempering - Speicification (Second Revision) |
- |
Please see remarks. View breakup
Rs. 3930.00 + testing charges as per relevant ISS.
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 8,Table 6 (Hardness Test - IS 1500(Pt -1)) |
- |
|
|
|
| 9, Table 5 (Mechanical ptoperties - IS 1608(Pt -1),IS 1598) |
- |
|
|
|
| 13.1&13.2&13.3 (Dimensional tolerances- IS 3739 and is 3469(Pt 1to 3); Tolerance on straightness) |
- |
|
|
|
| 5 (Freedom from defects , IS 5517) |
- |
|
|
|
| Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2 (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
|
- |
-
Excluding Ni, Cr, Mo,Cu,V,Sn,Al, Co,B, Grain size |
| 13636 |
BIS, Central Laboratory (CL)
| None
| IS 9471 : Part 2 (1980) |
Specification for modular lower limb orthotic components: Part 2 stirrups, split |
- |
Rs.3800/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3 (Shap e and Dimension s) |
- |
|
|
|
| 3.1 (Shape) |
- |
|
|
|
| 3.2 (Overall Dimensions) |
- |
|
|
|
| 3.3 (Dimensions of Lobes) |
- |
|
|
|
| 3..3.1 (Free motion ( Type 1 )) |
- |
|
|
|
| 3.3.2 (Limited motion (Type 2)) |
- |
|
|
|
| 3.3.3 (Foot drop ( Type 3 )) |
- |
|
|
|
| 3.3.4 (Double action ( Type 4 )) |
- |
|
|
|
| 4 (Finished Thickness of components) |
- |
|
|
|
| 5 (Workmanship and Finish) |
- |
|
|
|
| Cl.4 of IS 9471 & IS 1079 (Carbon- Relevant parts of IS 228 or by other instrumental and chemical method) |
- |
|
|
|
| Cl.4 of IS 9471 & IS 1079 (Sulphur- Relevant parts of IS 228 or by other instrumental and chemical method) |
- |
|
|
|
| Cl.4 of IS 9471 & IS 1079 (Phosphorus- Relevant parts of IS 228 or by other instrumental and chemical method) |
- |
|
|
|
| Cl.4 of IS 9471 & IS 1079 (Manganese- Relevant parts of IS 228 or by other instrumental and chemical method) |
- |
|
|
|
| Cl.4 of IS 9471 & IS 1079 (Nitrogen- Relevant parts of IS 228 or by other instrumental and chemical method) |
- |
|
|
|
| Cl. 4.1 of IS 9471(Part-2) & 6911 (Carbon- Relevant parts of IS 228 or by other instrumental and chemical method) |
- |
|
|
|
| Cl. 4.1 of IS 9471(Part-2) & 6911 (Sulphur- Relevant parts of IS 228 or by other instrumental and chemical method) |
- |
|
|
|
| Cl. 4.1 of IS 9471(Part-2) & 6911 (Phosphorus- Relevant parts of IS 228 or by other instrumental and chemical method) |
- |
|
|
|
| Cl. 4.1 of IS 9471(Part-2) & 6911 (Manganese- Relevant parts of IS 228 or by other instrumental and chemical method) |
- |
|
|
|
| Cl. 4.1 of IS 9471(Part-2) & 6911 (Nitrogen- Relevant parts of IS 228 or by other instrumental and chemical method) |
- |
|
|
|
|
- |
-
- |
| 13637 |
BIS, Central Laboratory (CL)
| None
| IS 14255 (1995) |
Aertal bunched cables - For working voltages up to and including 1100 Volts - Specification |
- |
Please see remarks View breakup
Rs.16650.00 for XLPE insulated single core cable
Rs.15150.00 for PE insulated single core cable
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1 (Phase/Street Lighting conductor) |
- |
|
|
|
| 4.2 (Messenger (Neutral Conductor or Otherwise)) |
- |
|
|
|
| 5.1 (Insulation) |
- |
|
|
|
| 6.1 (Flexibility class) |
- |
|
|
|
| 6.2 (Compactness) |
- |
|
|
|
| 6.2 (No of strands) |
- |
|
|
|
| 6.2 (Surface) |
- |
|
|
|
| 6.3 (Protective barrier) |
- |
|
|
|
| 6.4 (size of street lighting conductor) |
- |
|
|
|
| 6.5 (Size of messenger conductor ) |
- |
|
|
|
| 6.6 (Joints in messenger conductor ) |
- |
|
|
|
| 6.6 (Direction of outer layer) |
- |
|
|
|
| 7.1 (Insulation) |
- |
|
|
|
| 7.2 ( Thickness of insulation) |
- |
|
|
|
| 7.4 (Aplication of the insulation ) |
- |
|
|
|
| 7.5 (Colour of the insulation ) |
- |
|
|
|
| 8.1 (Core identification) |
- |
|
|
|
| 8.2 (Core identification) |
- |
|
|
|
| 9.1 (Assembly (Laying up)) |
- |
|
|
|
| 9.2 (Assembly (Laying up)) |
- |
|
|
|
| 9.3 (Direction of lay) |
- |
|
|
|
| 10.1 a) i) (Tests on phase/street light conductor: tensile test - Test method IS10810:Part 2) |
- |
|
|
|
| 10.1 a) ii) (Wrapping test - 10810: Part 3) |
- |
|
|
|
| 10.1 a) iii) (Resistance test - IS10810: Part 5) |
- |
|
|
|
| 10.1 a) i) (Tests on phase/street light conductor: tensile test - Test method IS10810:Part 2) |
- |
|
|
|
| 10.1 a) ii) (Wrapping test - 10810: Part 3) |
- |
|
|
|
| 10.1 a) iii) (Resistance test - IS10810: Part 5) |
- |
|
|
|
| 10.1 b) i) (Test on messenger conductor: Breaking load - IS 10810: Part 2) |
- |
|
|
|
| 10.1 b) ii) (Test on messenger conductor: Elongation test - Cl 11.3) |
- |
|
|
|
| 10.1 b) iii) (Test on messenger conductor: Resistance test - IS 10810: Part 5) |
- |
|
|
|
| 10.1 c) i) (Physical tests for XLPE Insulation:
Tensile strength - IS 10810: Part 7) |
- |
|
|
|
| 10.1 c) i) (Physical tests for XLPE Insulation:
elongation at break - IS 10810: part 7) |
- |
|
|
|
| 10.1 c) ii) (Ageing in air oven : Tensile strength variation - IS 10810:Part 11) |
- |
|
|
|
| 10.1 c) ii) (Ageing in air oven : Elongation variation- IS 10810: Part 11) |
- |
|
|
|
| 10.1 c) iii) (Hot set test: Elongation under load - IS 10810: Part 30) |
- |
|
|
|
| 10.1 c) iii) (Hot set test: Permanent elongation (set) after cooling - IS 10810: Part 30) |
- |
|
|
|
| 10.1 c) iv) (Shrinkage test : Shrinkage - 10810:Part 12) |
- |
|
|
|
| 10.1 c) iv) (Shrinkage test : Crack Observed - 10810:Part 12) |
- |
|
|
|
| 10.1 c) v) (Water ahsorption (Gravimetric) - IS 10810: Part 33 ) |
- |
|
|
|
| 10.1 d) i) (Physical test for PE insulation:
Tensile strength - IS 10810: Part 7 ) |
- |
|
|
|
| 10.1 d) i) (Physical test for PE insulation: elongation at break - IS 10810: Part 7) |
- |
|
|
|
| 10.1 f) (Insulation resistance (Volume resistivity) test a) volume resistivity at 27°C - IS 10810: Part 43) |
- |
|
|
|
| 10.1 f) (Insulation resistance (Volume resistivity) test b) volume resistivity at 70°C - IS 10810: Part 43) |
- |
|
|
|
| 10.1 f) (Insulation resistance (Volume resistivity) test a) volume resistivity at 27°C - IS 10810: Part 43) |
- |
|
|
|
| 10.1 f) (Insulation resistance (Volume resistivity) test b) volume resistivity at 70°C - IS 10810: Part 43) |
- |
|
|
|
| 10.1 g) (High voltage test - IS10810:Part 45) |
- |
|
|
|
| 6.1 (Construction of phase conductor) |
- |
|
|
|
| 6.1 (Number of wires (phase conductor)) |
- |
|
|
|
| 6.1 (Construction of Street Lighting conductor) |
- |
|
|
|
| 6.1 (Number of wires (Street Lighting conductor)) |
- |
|
|
|
| 12.1 (Manufacturer's Identification) |
- |
|
|
|
| 12.2 (Cable Identification) |
- |
|
|
|
|
- |
-
Excluding Complete for XLPE Insulation; |
| 13638 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 12337 (1988) |
Specification for manually operated fertilizer broadcaster |
- |
Rs 600/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.9 (Constructional Requirements- Total Mass) |
- |
|
|
|
| 5 (Capacity) |
- |
|
|
|
| 4.1 (Constructional Requirements- Hopper) |
- |
|
|
|
| 4.1.1 (Constructional Requirements- Hopper) |
- |
|
|
|
| 4.2 (Constructional Requirements- Spreading Disc) |
- |
|
|
|
| 4.4 (Constructional Requirements- Agitator) |
- |
|
|
|
| 4.6 (Constructional Requirements- Crank) |
- |
|
|
|
| 4.7 (Constructional Requirements- Straps) |
- |
|
|
|
| 4.7 (Constructional Requirements- Straps (cushion width)) |
- |
|
|
|
| 4.9 (Constructional Requirements- Total Mass) |
- |
|
|
|
|
- |
-
- |
| 13639 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 2681 (1993) |
Non - Ferrous metal sliding door bolts (Aldrops) for use with padlocks - Specification (Third Revision) |
All grades (pl see remarks) |
1500 View breakup
Rs.1500/- and Material testing charges as per relevant referred Iss
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.1-Total 2 (DIMENSIONS AND TOLERANCES-A) |
- |
|
|
|
| 6.1-Total 2 (DIMENSIONS AND TOLERANCES-B) |
- |
|
|
|
| 6.1-Total 2 (DIMENSIONS AND TOLERANCES-C) |
- |
|
|
|
| 6.1-Total 2 (DIMENSIONS AND TOLERANCES-D) |
- |
|
|
|
| 6.1-Total 2 (DIMENSIONS AND TOLERANCES-E) |
- |
|
|
|
| 6.1-Total 2 (DIMENSIONS AND TOLERANCES-F) |
- |
|
|
|
| 6.1-Total 2 (DIMENSIONS AND TOLERANCES-G) |
- |
|
|
|
| 6.1-Total 2 (DIMENSIONS AND TOLERANCES-H) |
- |
|
|
|
| 6.1-Total 2 (DIMENSIONS AND TOLERANCES-J) |
- |
|
|
|
| 6.1-Total 2 (DIMENSIONS AND TOLERANCES-K) |
- |
|
|
|
| 6.1-Total 2 (DIMENSIONS AND TOLERANCES-L) |
- |
|
|
|
| 6.1-Total 2 (DIMENSIONS AND TOLERANCES-M) |
- |
|
|
|
| 6.1-Total 2 (DIMENSIONS AND TOLERANCES-N) |
- |
|
|
|
| 6.1-Total 2 (DIMENSIONS AND TOLERANCES-Q) |
- |
|
|
|
| 6.1-Total 2 (DIMENSIONS AND TOLERANCES-S) |
- |
|
|
|
| 6.1-Total 2 (DIMENSIONS AND TOLERANCES-T) |
- |
|
|
|
| 6.1-Total 2 (DIMENSIONS AND TOLERANCES-W) |
- |
|
|
|
| 6.1-Total 2 (DIMENSIONS AND TOLERANCES-No. of Screw on Staple or Clip to accommodate Wood Screw N0 8) |
- |
|
|
|
| 6.1-Table 3 (DIMENSIONS AND TOLERANCES-U) |
- |
|
|
|
| 7.1 (MANUFACTURE-General) |
- |
|
|
|
| Cl. 8.2 (Ref. Cl.9 of IS 1868:1996) (Anodinc casting thickness (Cl. 9.2 of IS 1868:1996)) |
- |
|
|
|
| 8.2 (FINISH-anodic casting -Min Avg thickness) |
- |
|
|
|
| 8.2 (FINISH-anodic casting -Min Local thickness) |
- |
|
|
|
|
- |
-
Chem-Facility not available for micro alloying elements, for cast iron- facility not available for Sulphur |
| 13640 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 15997 (2012) |
Low nickel austenitic stainless steel sheet and strip for utensils and kitchen appliances - Specification |
- |
Rs 2850 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl. 8.1, 8.1.1 & 10.1 Table 1 (Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 8.1, 8.1.1 & 10.1 Table 1 (Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 8.1, 8.1.1 & 10.1 Table 1 (Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 8.1, 8.1.1 & 10.1 Table 1 (Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 8.1, 8.1.1 & 10.1 Table 1 (Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| 9.3 (Tensile Test-1608:Part 1) |
- |
|
|
|
| 9.3, Table 3 (Yield Strength, Mpa) |
- |
|
|
|
| 9.3, Table 3 (Elongation, %) |
- |
|
|
|
| 9.4 (Erichsen Cupping Test,(Average depth of cupping) mm) |
- |
|
|
|
| 11 (Surface finish) |
- |
|
|
|
| 12 (Dimensions) |
- |
|
|
|
| 14.1 (Thickness,mm) |
- |
|
|
|
| 14.2 ( Width, mm) |
- |
|
|
|
| 14.3 (Length, mm) |
- |
|
|
|
| 14.4 (Flatness, mm) |
- |
|
|
|
| 14.5 (Camber) |
- |
|
|
|
| 17 (Marking) |
- |
|
|
|
|
- |
-
Test facilities are not available for the following:
1. Ni, Cr, Cu, N,
2. Erichsen Cuppling Machine |
| 13641 |
BIS, Central Laboratory (CL)
| None
| IS 8498 (2013) |
Temephos, emulsifiable concentrate (EC) - Specification (First Revision) |
- |
2450 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.2.1 (Description) |
- |
|
|
|
| 3.2.2 (Cold Test) |
- |
|
|
|
| 3.2.3 (Flash Point (Abel)) |
- |
|
|
|
| 3.2.4 (Emulsion Stability) |
- |
|
|
|
| 3.3.2 (Acidity (as H2SO4), ) |
- |
|
|
|
| 3.3.1 (Temephos content) |
- |
|
|
|
|
- |
-
Excluding Cl. 2.3.1 Content; |
| 13642 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 5290 (1993) |
Landing valves - Specification (Third Revision) |
- |
Rs 4500/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5, 5.1 (a) fig-1, type A (Types AND DIMENSIONS) |
- |
|
|
|
| 5, 5.1 (b) fig-2, type B (Types AND DIMENSIONS) |
- |
|
|
|
| 5.2 (Types AND DIMENSIONS) |
- |
|
|
|
| 5.2.1 (Types AND DIMENSIONS) |
- |
|
|
|
| 7, 7.1 (7 PERFORMANCE REQUIREMENTS, Water Tightness Test for the Valve) |
- |
|
|
|
| 7, 7.2 (hydrostatics pressure tests) |
- |
|
|
|
| 7, 7.3 (Flow test, pressure 7 kgf/cm2) |
- |
|
|
|
| 6, 6.1 (Finish) |
- |
|
|
|
| 6, 6.2 (Finish) |
- |
|
|
|
|
- |
-
Excluding Flow test, Thread M8, G11/8, G21/4, G3, 24x5 , Facility for chemical testing is not available |
| 13643 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 11313 (2007) |
Hydraulic power sprayers - Specification (First Revision) |
- |
13350 View breakup
Rs 13350/- + charges as per relevant ISS excluding material test.
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5 (CONSTRUCTION REQUIREMENTS) |
- |
|
|
|
| 5 (CONSTRUCTION REQUIREMENTS) |
- |
|
|
|
| 6.1 (Discharge Rate/Suction Capacity) |
- |
|
|
|
| 6.2 (Volumetric Efficiency) |
- |
|
|
|
| 6.4 (Maximum Achievable Pressure) |
- |
|
|
|
| 6.5 (Endurance Test) |
- |
|
|
|
|
- |
-
- |
| 13644 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 10124 : Part 2 (2009) |
Fabricated pvc - U fittings for potable water supplies - Specification: Part 2 specific requirements for sockets (Second Revision) |
- |
Rs.1800/ View breakup
Rs.1800/- and Material testing charges as per relevant referred Iss
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.2.1, Table-1, Fig-1 (B) |
- |
|
|
|
| 3.2.1, Table-1, Fig-1 (Minimum wall thickness for working pressure) |
- |
|
|
|
| 3.2.1, Table-1, Fig-1 (Plumbing) |
- |
|
|
|
| Clause 3.2.2, and Fig. 2. (B) |
- |
|
|
|
| Clause 3.2.2, and Fig. 2. (Minimum wall thickness for working pressure) |
- |
|
|
|
| 3.2.2, and Fig. 2 (Dimensions of Socket for Elastomeric Sealing Ring Joint) |
- |
|
|
|
|
- |
-
The following test facilities are not available:
(1)Effect on water
(2) Testing facility above 250 mm for Short Term Hydrostatic test |
| 13645 |
BIS, Central Laboratory (CL)
| None
| IS 3195 (1992) |
Steel for the manufacture of volute and helical springs (For Railway Rolling Stock) - Specification (Third Revision) |
- |
1050 Chemical View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl. 3, 6.1, 6.2 & Table 1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 3, 6.1, 6.2 & Table 1 (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 3, 6.1, 6.2 & Table 1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 3, 6.1, 6.2 & Table 1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 3, 6.1, 6.2 & Table 1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 3, 6.1, 6.2 & Table 1 (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| 7 (Hardness) |
- |
|
|
|
| 10 (Freedom from defects) |
- |
|
|
|
| 11 ( DIMENSIONS AND TOLERANCES) |
- |
|
|
|
|
- |
-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;
Excluding Except Vanadium as per table 1; Decarburization (Cl 8) |
| 13646 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 10124 : Part 1 (2009) |
Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 1 General Requirements (Second Revision) |
- |
Rs 1500/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1 Table-1 Fig.1 (Dimension of Socket length) |
- |
|
|
|
| 6.1 (Opacity test in accordance with IS 12235 (Part 3)) |
- |
|
|
|
| 6.2 (Short Term Hydraulic Test in accordance with Annex A) |
- |
|
|
|
|
- |
-
The following test facilities are not available:
(1)Effect on water
(2) Testing facility above 250 mm for Short Term Hydrostatic test |
| 13647 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 9798 (2013) |
Low pressure regulators for use with liquefied petroleum gas (LPG) - Specification (Second Revision) |
- |
14276 View breakup
Rs. 14276/- + testing charges as per referred ISS (excluding excess flow valve and strength on inlet connection).
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.3.2
IS 3400(Part 4) (The material shall not show change of more than 10 IRHD when subjected to ageing of 72 h at 70°C in accordance with the method prescribed in 3 or 4 of IS 3400 (Part 4)) |
- |
|
|
|
| 4.3.5ai
Annex D (The material shall, after immersion in n-pentane or octet commercial LPG for 72 h, meet the appropriate requirements specified in Annex D
Diaphragm: Extractable
) |
- |
|
|
|
| 4.3.3 (Clamping test) |
- |
|
|
|
| 4.3.5aii
Annex D (Diaphragm: Absorbed) |
- |
|
|
|
| 4.3.5b
IS 3400(Part 2) (Changes in hardness, before and after the immersion ) |
- |
|
|
|
| 4.4.2ai
Annex D (The material shall, after immersion in n-pentane or octet commercial LPG for 72 h, meet the appropriate requirements specified in Annex D
Extractable
) |
- |
|
|
|
| 4.4.2b
IS 3400(Part 2) (Changes in hardness, before and after the test) |
- |
|
|
|
| 4.4.3
IS 3400(Part 4) (The material shall not show change of more than 10 IRHD when subjected to ageing of 72 h at 70°C in accordance with the method prescribed in 3 or 4 of IS 3400 (Part 4)) |
- |
|
|
|
| 5.5.1 (Hydrostatic PressureTest) |
- |
|
|
|
| 5.5.2 (Pneumatic PressureTest) |
- |
|
|
|
| 5.6,5.6.1
Fig 2A/ Fig 2B (Outlet Connection:-
Non-threaded Outlet Connection) |
- |
|
|
|
| 6,6.1,6.2 (SOUNDNESS) |
- |
|
|
|
| 8.9 (Performance
(Before Cycle test, Low Temp. Test and High Temp. Test)
Inlet Pressure Flow Rate
) |
- |
|
|
|
| 8.9 (0.5 kgf/cm2 100 % ) |
- |
|
|
|
| 8.9 (17 kgf/cm2 10 % ) |
- |
|
|
|
| 8.9 (Static(lock up) pressure) |
- |
|
|
|
| 8.10.3
Annex H
8.9 (High Temperature Test
Performance test after exposure to
temperature at 650 C for 10 Min and back
to ambient condition.
Inlet Pressure Flow Rate) |
- |
|
|
|
| 8.10.2
Annex H
8.9 (Low Temperature Test
Performance test after exposure to
temperature at -200 C for 10 Min and back
to ambient condition.
Inlet Pressure Flow Rate) |
- |
|
|
|
|
- |
-
Test facilities are not available for the following:
a) Mechanical strength of connections, Cl. 8.11
b) Compression set test for Rubber components
c) Test Bench as per Annex K |
| 13648 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 9295 (1983) |
Specification for steel tubes for idlers for belt conveyors (First Revision) |
- |
Rs 5100/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7.1 (Sulphur- Relevant Parts of IS 228 or any other established instrumental/chemical method) |
- |
|
|
|
| 7.1 (Phosphorous- Relevant Parts of IS 228 or any other established instrumental/chemical method) |
- |
|
|
|
| 8.1.1 Table 1 (Tensile Strength- IS 1608(1)) |
- |
|
|
|
| 8.1.1 Table 1 (Yield Strength- IS 1608) |
- |
|
|
|
| 8.2 (Drift Expansion Test- IS 2335) |
- |
|
|
|
| 8.3 (Flattening Test- IS 2328) |
- |
|
|
|
| 9.1 Table 2 (Outside Diameter) |
- |
|
|
|
| 9.1 Table 2 (Thickness) |
- |
|
|
|
| 9.1 Table 2 (Mass) |
- |
|
|
|
| 10 (Hardness) |
- |
|
|
|
| 13.1.1 (Ovality) |
- |
|
|
|
| 13.1.2 (Eccentricity) |
- |
|
|
|
| 15.1 (Straightness) |
- |
|
|
|
| 16.1 (Length) |
- |
|
|
|
|
- |
-
Test facilities are not available for the following:
1.Except Drift Expansion |
| 13649 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 8737 (2017) |
Valve fittings for use with liquefied petroleum gas (LPG) cylinders for more than 5 litre water capacity - Specification (Second Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.2.1Sl.No.i (Copper) |
- |
|
|
|
| 4.4 (Izod impact strength-IS 1598) |
- |
|
|
|
| 9.2a (Cycle Test) |
- |
|
|
|
| 9.5bii (Pneumatic Test ,after cycle test:
Tightness of Valve Spindle and Valve Housing) |
- |
|
|
|
| 4.3.1a (Tensile Strength-IS 1608) |
- |
|
|
|
| 4.3.1b (Elongation-IS 1608) |
- |
|
|
|
| 7.10 (The minimum finished wall thickness at any portion of the valve shall not be less than 2.5 mm) |
- |
|
|
|
| 9.3
(Operation Test) |
- |
|
|
|
| 9.5bii (Pneumatic Test ,after cycle test:
Tightness of Valve Spindle and Valve Housing) |
- |
|
|
|
| 9.5biii (Pneumatic Test ,after cycle test:
Tightness of Joint Packing and Housing) |
- |
|
|
|
| 8.3.1 (Pneumatic Test:
Tightness of Joint Packing (in Valve Outlet) and Valve Spindle) |
- |
|
|
|
| 8.3.2 (Pneumatic Test:
Tightness of Valve Spindle and Valve Housing) |
- |
|
|
|
| 8.3.3 (Pneumatic Test:
Tightness of Joint Packing and Housing) |
- |
|
|
|
|
- |
-
"1.Cycles test
2. Security Cap /Nut
3. Spring a) Load Test b)Permanent set test c)Rust proofness of spring" |
| 13650 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 8423 (1994) |
Specification for controlled percolating hose for fire fighting |
- |
Rs. 4200/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl.4.1.1 (The nominal internal diameter of hose shall
be 38, SO, 63 and 70 rom.The internal diameter of the hose shall
be measured by a suitable tapered plug gauge,
and shall conform to the specified diameter
within a tolerance of + 2·0 mm.
-0'0) |
- |
|
|
|
| Cl.5. (The hose length shall be 30 m or of such
length as required.) |
- |
|
|
|
| Cl.6 (The hose shall be flexible and on being
machine coiled, the diameter of the coil of
30 m hose shall not exceed 45 em for all slzes
in dry state without coupling. The coil
diameter shall be measured at the widest part
of the coil.) |
- |
|
|
|
| Cl.7 (The average mass oC hose per metre shall
not be more than that prescribed in Table 1. For
determination of mass, sample of the hose shall
be conditioned at 27 ± 2°C and 65 ± 5 percent
relative humidity Cor a period of at least 48
hours and then shall be weighed under same
conditions.) |
- |
|
|
|
| Cl.8 (The percolation, when tested in accordance
with the procedure laid down in 8.1.1 shall not
exceed the limits prescribed in Table 2.) |
- |
|
|
|
| Cl.9 (The full length sample of the dry hose is
connected to the pump fitted with water and
pressure built up to. 7 kaf/cn,' (70 N/cm' )
steadily over a period of two minutes. After the
hose has been at pressure 7 kif/em' ( 70 NIemi)
for a period of S minutes, a visual inspection
I is made of the length to ascertain the evenness
and degree of wetting out along the complete
length of hose and at least 75 percent of the
hose jacket shall be evenly and consistently
wetted out in this manner.) |
- |
|
|
|
| Cl.10 (Full length of hose shall be subjected to an
internal hydraulic pressure of 2'1 MPa (21'4
kgf/ems ) at the rate of I MPa ( 10'2 kaf/em· )/
minute in ac.cordance with 1.3 of IS 443 : 191~
and maintained for a period of one minute.
During this test. the hose shan not show
breakage of yarn.) |
- |
|
|
|
|
- |
-
- |
