| 13921 |
BIS, Southern Regional Laboratory (SRL)
| None
| IS 11952 (1986) |
Specification for steels for piston pins (Gudgeon Pins) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.2, Table3 (i) Tensile Strength) |
- |
|
|
|
| 5.2, Table3 (ii) Hardness) |
- |
|
|
|
| 11 (TOLERANCES) |
- |
|
|
|
|
- |
-
" mech - 2 x 500 mm
Excluding except inclusions test, magnetic particle test, Grain size, hardenability, surface defects and Chemical tests |
| 13922 |
BIS, Southern Regional Laboratory (SRL)
| None
| IS 1785 : Part 2 (1983) |
Specification for plain hard drawn steel wire for prestressed concrete: Part 2 as - Drawn wire (First Revision) |
- |
Rs 3000/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 5.1 (Diameter) |
- |
|
|
|
| Cl 6.1 (Tensile Test On UTM) |
- |
|
|
|
| Cl 5.1.2 (Weight) |
- |
|
|
|
|
- |
-
" 2mtl.
Excluding Except proof load, ductility, stress relaxation & reverse bend test |
| 13923 |
BIS, Central Laboratory (CL)
| None
| IS 1079 (2017) |
Hot rolled carbon steel sheet, plate and strip - Specification (Seventh Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 8 (UTM) |
- |
|
|
|
| Cl 9 (Press) |
- |
|
|
|
| Cl 10 (Die Press) |
- |
|
|
|
| Cl 12 (Workmanship) |
- |
|
|
|
| Cl 13 (Length, Width & Thickness) |
- |
|
|
|
| 6.1 (Carbon %) |
- |
|
|
|
| 6.1 (Manganese %) |
- |
|
|
|
| 6.1 (Phosphorus %) |
- |
|
|
|
| 6.1 (Sulphur %) |
- |
|
|
|
| 6.1 ( Copper %) |
- |
|
|
|
| 6.1 ( Aluminium %) |
- |
|
|
|
| 6.1 ( Nitrogen%) |
- |
|
|
|
| 6.1 ( Nb) |
- |
|
|
|
| 6.1 (V) |
- |
|
|
|
| 6.1 ( Ti) |
- |
|
|
|
| 6.1 (Cr) |
- |
|
|
|
| 6.1 (Mo) |
- |
|
|
|
| 6.1 (Ni) |
- |
|
|
|
| 6.1 (Silicon %) |
- |
|
|
|
|
- |
-
Grade/Designation, Quality type of killing and declaration regarding micro alloying elements addition may please be declared. Sample size- 5 pcs of 5 cm x 5 cm having dia> 3mm and thickness >0.8 mm; |
| 13924 |
BIS, Southern Regional Laboratory (SRL)
| None
| IS 1159 (1981) |
Specification for baking powder (First Revision) |
- |
Rs.2100/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Table 1 (i), Annax A (Available carbon dioxide) |
- |
|
|
|
| Table 1 (ii), CL 12 of
IS : 6287 • 1971 (Arsenic (as As)) |
- |
|
|
|
| Table 1 (iii), CI 13
IS : 6287 • 1971 (Heavy Metals (As Pb)) |
- |
|
|
|
|
- |
-
" 500 g |
| 13925 |
BIS, Central Laboratory (CL)
| None
| IS 3854 (1997) |
Switches for domestic and similar purposes - Specification (Second Revision) |
- |
Please see remarks. View breakup
6A Screw type terminals-Rs.4900/-, 6A Screwless type terminals-Rs.5850/-,10A Screw type terminals-Rs.5050/-, 10A Screwless type terminals-Rs.6400/-, 16A Screw type terminals-Rs.5850/-,16A Screwless type terminals-Rs.7900/-, 20A-Rs.5250/-, 25A-Rs.5900/-, 32A-Rs.6250/-, 40A-Rs.6550/-, 63A-Rs.6200/-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6 (Rating) |
- |
|
|
|
| 7 (Classification) |
- |
|
|
|
| 7 (Classification) |
- |
|
|
|
| 7 (Classification) |
- |
|
|
|
| 7 (Classification) |
- |
|
|
|
| 7 (Classification) |
- |
|
|
|
| 7 (Classification) |
- |
|
|
|
| 7 (Classification) |
- |
|
|
|
| 8 (Marking) |
- |
|
|
|
| 8 (Marking) |
- |
|
|
|
| 8 (Marking) |
- |
|
|
|
| 8 (Marking) |
- |
|
|
|
| 8 (Marking) |
- |
|
|
|
| 8 (Marking) |
- |
|
|
|
| 8 (Marking) |
- |
|
|
|
| 8.9 (Marking) |
- |
|
|
|
| 6 (Rating) |
- |
|
|
|
| 10 (Protection against Electric Shock) |
- |
|
|
|
| 11.1 (Provision for earthing) |
- |
|
|
|
| 12 (Terminals) |
- |
|
|
|
| 12.2.1 (Terminals) |
- |
|
|
|
| 12.2.2 (Connection of conductor) |
- |
|
|
|
| 12.2.3 (Mechanical strength of terminals) |
- |
|
|
|
| 12.2.4 (Resistance to corrosion) |
- |
|
|
|
| 12.2.5 (Undue damage to conductor) |
- |
|
|
|
| 12.2.7 (Insertion of conductor) |
- |
|
|
|
| 12.2.9 (Locking against accidental loosening) |
- |
|
|
|
| 12.2.11 (Distance between screw and conductor) |
- |
|
|
|
| 12.3.2 (Screwless terminals) |
- |
|
|
|
| 12.3.3 (Connectin of conductor) |
- |
|
|
|
| 12.3.4 (Material of terminals) |
- |
|
|
|
| 12.3.5 (Clamping) |
- |
|
|
|
| 12.3.7 (v) Interconnection of conductors [Cl. 12.3.7]) |
- |
|
|
|
| 12.3.11 (vi) Electrical & Thermal Stresses [Cl 12.3.11]) |
- |
|
|
|
| 12.3.12 (vii) Deflection Stresses [Cl. 12.3.12]) |
- |
|
|
|
| 13.1 (a) Insulating lining, barriers and the like [Cl 13.1]) |
- |
|
|
|
| 13.2 (b) Construction of switch [Cl 13.2]) |
- |
|
|
|
| 13.2 (i) Installation Test) |
- |
|
|
|
| 13.3 (c) Covers,cover plates and actuating members [Cl 13.3]) |
- |
|
|
|
| 13.4 (d) Ordinary switches [Cl 13.4]) |
- |
|
|
|
| 13.5 (e) Rotary switches [Cl 13.5]) |
- |
|
|
|
| 13.6 (f) Screws and other means [Cl 13.6]) |
- |
|
|
|
| 13.7 (g) Combination of switches or switches and socket outlets [Cl 13.7]) |
- |
|
|
|
| 13.8 (h) Assessories combined with switches [Cl. 13.8]) |
- |
|
|
|
| 13.9 (j) Switches other than ordinary switches [Cl. 13.9]) |
- |
|
|
|
| 13.1 (k) Switches to be installed in a box [Cl. 13.10]) |
- |
|
|
|
| 13.11 (l) Surface type switches other than ordinary switch [Cl. 13.11]) |
- |
|
|
|
| 13.12, 13.13, 13.14 (m) Inlet opening [Cl. 13.12.13.13 & 13.14]) |
- |
|
|
|
| 13.15 (q) Requirements for membrane in inlet opening [ Cl. 13.15]) |
- |
|
|
|
| 13.15 (q) Requirements for membrane in inlet opening [ Cl. 13.15]) |
- |
|
|
|
| 13.15 (q) Requirements for membrane in inlet opening [ Cl. 13.15]) |
- |
|
|
|
| 13.15 (q) Requirements for membrane in inlet opening [ Cl. 13.15]) |
- |
|
|
|
| 14 (Mechanism [Cl. 14]) |
- |
|
|
|
| 15.1 (Resistance to Ageing, to Harmful Ingress of water and to Humidity [Cl. 15]: Resistance to Ageing, [Cl. 15.1]) |
- |
|
|
|
| 15.2 (b)Resistance to Harmful ingress of water [Cl. 15.2]) |
- |
|
|
|
| 15.3 (c) Resistance to Humidity [Cl. 15.3]) |
- |
|
|
|
| 16.1 (Insulation resistance [Cl. 16.1]) |
- |
|
|
|
| 16.2 ( Electric Strength [Cl. 16.2]) |
- |
|
|
|
| 17 (Temperature- rise [Cl. 17]) |
- |
|
|
|
| 18 (Marking and breaking Capacity[Cl. 18]) |
- |
|
|
|
| 19 (Normal Operation [Cl. 19] a) General & Operation) |
- |
|
|
|
| 19 (b) Electric Strength) |
- |
|
|
|
| 19 (c)Temperature-rise ) |
- |
|
|
|
| 14.3 (d)Test for arcing and sparking [Cl 14.3]) |
- |
|
|
|
| 19.2 (Normal Operation (For AX type Switches) [Cl. 19.2]) |
- |
|
|
|
| 20 (Mechanical Strength Test [Cl. 20]) |
- |
|
|
|
| 21 (Resistance to Heat [Cl.21]) |
- |
|
|
|
| 22 (Screw, Current Carrying Part And Connection [Cl.22]) |
- |
|
|
|
| 22.1 (i) Screw & Nuts [Cl.22.1]) |
- |
|
|
|
| 22.4 (ii) Screw & rivets [Cl . 22.4]) |
- |
|
|
|
| 22.5 (iv) Current carrying part [Cl.22.5]) |
- |
|
|
|
| 23.2 (Creepage distances, clearances and distance through sealing compound [Cl.23]) |
- |
|
|
|
| 24.1.1 (Resistance to Abnormal Heat & Fire [Cl.24.1] [Glow Wire Test] [Cl.24.1.1]) |
- |
|
|
|
| 24.2 (Resistance to tracking [For Switch other than ordinary] [Cl.24.2]) |
- |
|
|
|
| 6 (Rating) |
- |
|
|
|
| 7 (Classification) |
- |
|
|
|
| 21 (Resistance to Heat [Cl.21]) |
- |
|
|
|
| 21 (Resistance to Heat [Cl.21]) |
- |
|
|
|
| 23.2 (Creepage distances, clearances and distance through sealing compound [Cl.23]) |
- |
|
|
|
| 22.3 (iii) Electrical Connections [Cl.22.3]) |
- |
|
|
|
| 25 of IS 3854 : 1997 (Resistance to rusting) |
- |
|
|
|
| 8 (Marking) |
- |
|
|
|
|
- |
-
- |
| 13926 |
BIS, Central Laboratory (CL)
| None
| IS 1489 : Part 2 (2015) |
Portland - Pozzolana cement - Specification: Part 2 calcined clay based |
- |
Rs.8420/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7 -Table 2- i (Fineness 4031 Part 2) |
- |
|
|
|
| 7 -Table 2- ii- a (Expansion by Le Chatelier- 4031 Part 3) |
- |
|
|
|
| 7 -Table 2- ii- b (Expansion by Autoclave- 4031 Part 3) |
- |
|
|
|
| 7 -Table 2- iii- a (Setting Time Initial- 4031 Part 5) |
- |
|
|
|
| 7 -Table 2-iii- b (Setting Time Final- 4031 Part 5) |
- |
|
|
|
| 7 -Table 2- iv- a (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6) |
- |
|
|
|
| 7 -Table 2- iv- b (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6) |
- |
|
|
|
| 7 -Table 2- iv- c (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6) |
- |
|
|
|
| 7 -Table 2- vi (Drying Shrinkage- IS 4031 Part 10) |
- |
|
|
|
| 6 - Table - 1 i (Insoluble residue - Cl 7.4 of IS 4032:1985) |
- |
|
|
|
| 6 - Table - 1 ii (Magnesia - Cl 7.2 of IS 4032:1985) |
- |
|
|
|
| 6 - Table - 1 iii (Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985) |
- |
|
|
|
| 6 - Table - 1 iv (Loss on ignition - Cl 7.1 of IS 4032:1985) |
- |
|
|
|
| 6 - Table - 1 v (Chloride content - Cl 4.13 of IS 4032:1985) |
- |
|
|
|
| 6 - Table - 1 vi ( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985) |
- |
|
|
|
|
- |
-
Excluding Table 1,Clause 6.1 ,sl. no.(vi) , alkali content; |
| 13927 |
BIS, Southern Regional Laboratory (SRL)
| None
| IS 1785 : Part 1 (1983) |
Specification for plain hard - Drawn steel wire for prestressed concrete: Part 1 cold drawn stress - Relieved wire (Second Revision) |
- |
Rs. 27300.00 (Complete testing charges) Rs. 9300.00 (F View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 5.1 (Diameter) |
- |
|
|
|
| Cl 6.1 (Tensile Test On UTM) |
- |
|
|
|
| Cl 6.4 (Tensile Test On UTM) |
- |
|
|
|
|
- |
-
" 2mt.+2m "
Excluding Except proof load, ductility, stress relaxation & reverse bend test |
| 13928 |
BIS, Central Laboratory (CL)
| None
| IS 1293 (2019) |
Plugs and socket - Outlets of rated Voltage up to and including 250 Volts and rated current up to and including 16 amperes - Specification (Third Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6 (Ratings) |
- |
|
|
|
| 6 (Ratings) |
- |
|
|
|
| 6 (Ratings) |
- |
|
|
|
| 7.1.1 (Accessories Classification) |
- |
|
|
|
| 7.1.2 (Accessories Classification) |
- |
|
|
|
| 7.1.3 (Accessories Classification) |
- |
|
|
|
| 7.1.4 (Accessories Classification) |
- |
|
|
|
| 7.2.1 (Socket-Outlets Classification) |
- |
|
|
|
| 7.2.2 (Socket-Outlets Classification) |
- |
|
|
|
| 7.2.3 (Socket-Outlets Classification) |
- |
|
|
|
| 7.2.4 (Socket-Outlets Classification) |
- |
|
|
|
| 7.3 (Plug Classification) |
- |
|
|
|
| 8.1 (MARKING) |
- |
|
|
|
| 8.8 (MARKING) |
- |
|
|
|
| 8.9 (MARKING) |
- |
|
|
|
| 9.1 (CHECKING OF DIMENSIONS) |
- |
|
|
|
| 9.2 (CHECKING OF DIMENSIONS) |
- |
|
|
|
| 10.1 (PROTECTION AGAINST ELECTRIC SHOCK) |
- |
|
|
|
| 10.1 (PROTECTION AGAINST ELECTRIC SHOCK) |
- |
|
|
|
| 10.4 (PROTECTION AGAINST ELECTRIC SHOCK) |
- |
|
|
|
| 10.5 (PROTECTION AGAINST ELECTRIC SHOCK) |
- |
|
|
|
| 10.6 (PROTECTION AGAINST ELECTRIC SHOCK) |
- |
|
|
|
| 10.7 (PROTECTION AGAINST ELECTRIC SHOCK) |
- |
|
|
|
| 11.1 (PROVISIONS FOR EARTHING) |
- |
|
|
|
| 11.2 (PROVISIONS FOR EARTHING) |
- |
|
|
|
| 11.3 (PROVISIONS FOR EARTHING) |
- |
|
|
|
| 11.4 (PROVISIONS FOR EARTHING) |
- |
|
|
|
| 11.5 (PROVISIONS FOR EARTHING) |
- |
|
|
|
| 11.6 (PROVISIONS FOR EARTHING) |
- |
|
|
|
| 12.1.1 (TERMINALS) |
- |
|
|
|
| 12.1.2 (TERMINALS) |
- |
|
|
|
| 12.2.1 (TERMINALS) |
- |
|
|
|
| 12.2.2 (TERMINALS) |
- |
|
|
|
| 12.2.3 (TERMINALS) |
- |
|
|
|
| 12.2.4 (TERMINALS) |
- |
|
|
|
| 12.2.5 (TERMINALS) |
- |
|
|
|
| 12.2.6 (TERMINALS) |
- |
|
|
|
| 12.2.7 (TERMINALS) |
- |
|
|
|
| 12.2.8 (TERMINALS) |
- |
|
|
|
| 12.2.9 (TERMINALS) |
- |
|
|
|
| 12.2.10 (TERMINALS) |
- |
|
|
|
| 12.2.11 (TERMINALS) |
- |
|
|
|
| 12.3.1 (TERMINALS) |
- |
|
|
|
| 12.3.2 (TERMINALS) |
- |
|
|
|
| 12.3.3 (TERMINALS) |
- |
|
|
|
| 12.3.4 (TERMINALS) |
- |
|
|
|
| 12.3.5 (TERMINALS) |
- |
|
|
|
| 12.3.6 (TERMINALS) |
- |
|
|
|
| 12.3.7 (TERMINALS) |
- |
|
|
|
| 12.3.8 (TERMINALS) |
- |
|
|
|
| 12.3.9 (TERMINALS) |
- |
|
|
|
| 12.3.10 (TERMINALS) |
- |
|
|
|
| 12.3.11 (TERMINALS) |
- |
|
|
|
| 12.3.12 (TERMINALS) |
- |
|
|
|
| 13.1 (CONSTRUCTIONS OF FIXED SOCKETOUTLETS) |
- |
|
|
|
| 13.2 (CONSTRUCTIONS OF FIXED SOCKETOUTLETS) |
- |
|
|
|
| 13.3 (CONSTRUCTIONS OF FIXED SOCKETOUTLETS) |
- |
|
|
|
| 13.4 (CONSTRUCTIONS OF FIXED SOCKETOUTLETS) |
- |
|
|
|
| 13.5 (CONSTRUCTIONS OF FIXED SOCKETOUTLETS) |
- |
|
|
|
| 13.6 (CONSTRUCTIONS OF FIXED SOCKETOUTLETS) |
- |
|
|
|
| 13.7 (CONSTRUCTIONS OF FIXED SOCKETOUTLETS) |
- |
|
|
|
| 13.8 (CONSTRUCTIONS OF FIXED SOCKETOUTLETS) |
- |
|
|
|
| 13.9 (CONSTRUCTIONS OF FIXED SOCKETOUTLETS) |
- |
|
|
|
| 13.1 (CONSTRUCTIONS OF FIXED SOCKETOUTLETS) |
- |
|
|
|
| 13.11 (CONSTRUCTIONS OF FIXED SOCKETOUTLETS) |
- |
|
|
|
| 13.12 (CONSTRUCTIONS OF FIXED SOCKETOUTLETS) |
- |
|
|
|
| 13.13 (CONSTRUCTIONS OF FIXED SOCKETOUTLETS) |
- |
|
|
|
| 13.14 (CONSTRUCTIONS OF FIXED SOCKETOUTLETS) |
- |
|
|
|
| 13.15 (CONSTRUCTIONS OF FIXED SOCKETOUTLETS) |
- |
|
|
|
| 13.16 (CONSTRUCTIONS OF FIXED SOCKETOUTLETS) |
- |
|
|
|
| 13.17 (CONSTRUCTIONS OF FIXED SOCKETOUTLETS) |
- |
|
|
|
| 13.18 (CONSTRUCTIONS OF FIXED SOCKETOUTLETS) |
- |
|
|
|
| 13.19 (CONSTRUCTIONS OF FIXED SOCKETOUTLETS) |
- |
|
|
|
| 13.2 (CONSTRUCTIONS OF FIXED SOCKETOUTLETS) |
- |
|
|
|
| 13.21 (CONSTRUCTIONS OF FIXED SOCKETOUTLETS) |
- |
|
|
|
| 13.22 (CONSTRUCTIONS OF FIXED SOCKETOUTLETS) |
- |
|
|
|
| 13.23 (CONSTRUCTIONS OF FIXED SOCKETOUTLETS) |
- |
|
|
|
| 14.1 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET) |
- |
|
|
|
| 14.2 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET) |
- |
|
|
|
| 14.3 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET) |
- |
|
|
|
| 14.4 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET) |
- |
|
|
|
| 14.5 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET) |
- |
|
|
|
| 14.6 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET) |
- |
|
|
|
| 14.7 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET) |
- |
|
|
|
| 14.8 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET) |
- |
|
|
|
| 14.9 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET) |
- |
|
|
|
| 14.1 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET) |
- |
|
|
|
| 14.11 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET) |
- |
|
|
|
| 14.12 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET) |
- |
|
|
|
| 14.13 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET) |
- |
|
|
|
| 14.14 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET) |
- |
|
|
|
| 14.15 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET) |
- |
|
|
|
| 14.16 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET) |
- |
|
|
|
| 14.17 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET) |
- |
|
|
|
| 14.18 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET) |
- |
|
|
|
| 14.19 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET) |
- |
|
|
|
| 14.2 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET) |
- |
|
|
|
| 14.21 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET) |
- |
|
|
|
| 14.22 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET) |
- |
|
|
|
| 14.23 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET) |
- |
|
|
|
| 14.23.1 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET) |
- |
|
|
|
| 14.23.2 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET) |
- |
|
|
|
| 14.24 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET) |
- |
|
|
|
| 14.25 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET) |
- |
|
|
|
| 14.26 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET) |
- |
|
|
|
| 15 (INTERLOCKED SOCKET-OUTLETS) |
- |
|
|
|
| 16.1 (RESISTANCE TO AGEING,) |
- |
|
|
|
| 16.2 (RESISTANCE TO HARMFUL INGRESS OF WATER AND TO HUMIDITY) |
- |
|
|
|
| 16.3 (Resistance to Humidity) |
- |
|
|
|
| 17.1 (INSULATION RESISTANCE AND ELECTRIC STRENGTH) |
- |
|
|
|
| 17.2 (INSULATION RESISTANCE AND ELECTRIC STRENGTH) |
- |
|
|
|
| 19 (TEMPERATURE RISE) |
- |
|
|
|
| 20 (BREAKING CAPACITY) |
- |
|
|
|
| 21 (NORMAL OPERATION) |
- |
|
|
|
| 21 (NORMAL OPERATION) |
- |
|
|
|
| 21 (NORMAL OPERATION) |
- |
|
|
|
| 22.1 (Verification of the Maximum Withdrawal Force) |
- |
|
|
|
| 22.2 (Verification of Minimum Withdrawal Force) |
- |
|
|
|
| 23.1 (FLEXIBLE CABLES AND THEIR CONNECTION) |
- |
|
|
|
| 23.3 (FLEXIBLE CABLES AND THEIR CONNECTION) |
- |
|
|
|
| 23.4 (FLEXIBLE CABLES AND THEIR CONNECTION) |
- |
|
|
|
| 24.1 (MECHANICAL STRENGTH
For all kinds of fixed socket-outlets
) |
- |
|
|
|
| 24.1 (MECHANICAL STRENGTH
For Plug
(1) with enclosures, covers or bodies of thermoplastic or elastomeric material) |
- |
|
|
|
| 24.1 (MECHANICAL STRENGTH
For surface mounting boxes) |
- |
|
|
|
| 24.2 (MECHANICAL STRENGTH
For portable single socket-outlets:
1) with enclosures, covers or bodies other than thermoplastic or elastomeric material) |
- |
|
|
|
| 24.2 (MECHANICAL STRENGTH
For portable multiple and combined socket outlets:
1) with enclosures, covers and bodies of elastomeric or thermoplastic material) |
- |
|
|
|
| 24.2 (MECHANICAL STRENGTH
For plug
1) with enclosures, covers and bodies other than elastomeric or thermoplastic material) |
- |
|
|
|
| 24.2 (MECHANICAL STRENGTH
For plug
1) with enclosures, covers and bodies of elastomeric or thermoplastic material) |
- |
|
|
|
| 24.3 (MECHANICAL STRENGTH
for fixed socket-outlets with a main part intended to be mounted directly on a surface) |
- |
|
|
|
| 24.4 (MECHANICAL STRENGTH
For portable single socket-outlets:
1) with enclosures, covers or bodies of thermoplastic or elastomeric material) |
- |
|
|
|
| 24.4 (MECHANICAL STRENGTH
For portable multiple and combined socket outlets:
1) with enclosures, covers and bodies of elastomeric or thermoplastic material) |
- |
|
|
|
| 24.4 (MECHANICAL STRENGTH
For Plug
1) with enclosures, covers and bodies of elastomeric or thermoplastic material) |
- |
|
|
|
| 24.5 (MECHANICAL STRENGTH
For portable single socket-outlets:
1) with enclosures, covers or bodies of thermoplastic or elastomeric material) |
- |
|
|
|
| 24.5 (MECHANICAL STRENGTH
For portable multiple and combined socket outlets:
1) with enclosures, covers and bodies of elastomeric or thermoplastic material) |
- |
|
|
|
| 24.5 (MECHANICAL STRENGTH
For Plug
1) with enclosures, covers and bodies of elastomeric or thermoplastic material) |
- |
|
|
|
| 24.6 (MECHANICAL STRENGTH
For screwed glands of accessories having an IP code higher than IP20) |
- |
|
|
|
| 24.7 (MECHANICAL STRENGTH
For plug pins provided with insulating sleeves) |
- |
|
|
|
| 24.8 (MECHANICAL STRENGTH
For shuttered socket-outlets) |
- |
|
|
|
| 24.9 (MECHANICAL STRENGTH
For portable multiple and combined socket outlets
(1) with enclosures, covers or bodies other than thermoplastic or elastomeric material) |
- |
|
|
|
| 24.1 (MECHANICAL STRENGTH
For Plug
(1) with enclosures, covers or bodies other than thermoplastic or elastomeric material) |
- |
|
|
|
| 24.11 (MECHANICAL STRENGTH
For portable socket-outlets having means for suspension on a wall) |
- |
|
|
|
| 24.12 (MECHANICAL STRENGTH
For portable socket-outlets having means for suspension on a wall) |
- |
|
|
|
| 24.13 (MECHANICAL STRENGTH
For portable socket-outlets having means for suspension on a wall) |
- |
|
|
|
| 24.14.1 (MECHANICAL STRENGTH
For fixed socket-outlets) |
- |
|
|
|
| 24.14.2 (MECHANICAL STRENGTH
For fixed socket-outlets) |
- |
|
|
|
| 25.1 (RESISTANCE TO HEAT
Accessories and surface mounting boxes) |
- |
|
|
|
| 25.2 (RESISTANCE TO HEAT
Parts of insulating material necessary to retain
current-carrying parts of the earthing circuit in position,
as well as parts of the front surface zone of thermoplastic material) |
- |
|
|
|
| 25.3 (RESISTANCE TO HEAT
Parts of insulating material not necessary to retain current-carrying parts and parts of the earthing circuit in position, even though they are in contact with them) |
- |
|
|
|
| 25.4 (RESISTANCE TO HEAT
) |
- |
|
|
|
| 26.1 (SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS) |
- |
|
|
|
| 27.1 (CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND) |
- |
|
|
|
| 27.2 (CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND) |
- |
|
|
|
| 27.3 (CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND) |
- |
|
|
|
| 28.1.1 (Resistance to Abnormal Heat and to Fire
Glow-Wire Test) |
- |
|
|
|
| 28.1.2 (Resistance to Abnormal Heat and to Fire
for plugs with pins provided with insulating sleeves) |
- |
|
|
|
| 28.2 (Resistance to Tracking
For accessories other than IP code higher than IPX0 parts of insulating material retaining live parts in position) |
- |
|
|
|
| 29 (RESISTANCE TO RUSTING) |
- |
|
|
|
| 30.1 (ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES
Pressure Test at High Temperature) |
- |
|
|
|
| 30.2 (ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES
Static Damp Heat Test) |
- |
|
|
|
| 30.3 (ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES
Tests at Low Temperature) |
- |
|
|
|
| 30.4 (ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES
Impact Test at Low Temperature) |
- |
|
|
|
| 7.1.5 (Accessories Classification) |
- |
|
|
|
| 8.1 (MARKING) |
- |
|
|
|
| 10.1 (PROTECTION AGAINST ELECTRIC SHOCK) |
- |
|
|
|
| 23.2 (FLEXIBLE CABLES AND THEIR CONNECTION) |
- |
|
|
|
|
- |
-
- |
| 13929 |
BIS, Southern Regional Laboratory (SRL)
| None
| IS 398 : Part 2 (1996) |
Aluminium conductors for overhead transmission purposes - Specification: Part 2 aluminium conuuctors, galvanized steel - Reinforced (Third Revision) |
- |
Please see remarks. View breakup
(I) For galvanized steel core only (consisting of 7 steel strands)- Rs.2850.00, (II) For galvanized steel reinforced stranded conductors with nominal aluminium area upto and including 100mm2-(a) For single steel wire core (1 steel + 6 Aluminium)- Rs. 1950.00 (b) For 7 wire core (7 steel + 6 Aluminium) - Rs. 4000.00, (III) For galvanized steel reinforced stranded conductors with nominal aluminium area more than 100mm2 (excluding special tests as per Cl. 13.9, 13.10 & 13.11)-(a) For stranded conductors with 37 strands-Rs.7900/-, (b) For stranded conductors with 49 strands-Rs.10000/-, (c) For stranded conductors with 61 strands-Rs.11100/-,
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 8.1.1 & 13.2 Table-1 (mech) (Diameter of Aluminium Wires Before Stranding) |
- |
|
|
|
| 8.1.1 & 13.2 Table 2 (mech) (Diameter of Steel Wires Before Stranding) |
- |
|
|
|
| 8.1.1 & 13.2 Table-1 (mech) (Diameter of Aluminium Wires After Stranding) |
- |
|
|
|
| 8.1.1 & 13.2 Table 2 (mech) (Diameter of Steel Wires After Stranding) |
- |
|
|
|
| 10 (elec) (Stranding) |
- |
|
|
|
| 13.3 Table 1 (mech) (Breaking Load of Aluminium Wires Before Stranding) |
- |
|
|
|
| 13.3 Table 2 (mech) (Breaking Load of Steel Wires Before Stranding) |
- |
|
|
|
| 13.3 Table 1 (mech) (Breaking Load of Aluminium Wires After Stranding) |
- |
|
|
|
| 13.3 Table 2 (mech) (Breaking Load of Steel Wires After Stranding) |
- |
|
|
|
| 13.4.1 (mech) (Ductility by Torsion Test before stranding) |
- |
|
|
|
| 13.4.1 (mech) (Ductility by Torsion Test after stranding) |
- |
|
|
|
| 13.5.1 (mech) (Wrapping Test Aluminium Wires Before Stranding) |
- |
|
|
|
| 13.5.1 (mech) (Wrapping Test Aluminium Wires After Stranding) |
- |
|
|
|
| 13.5.2 (mech) (Wrapping Test Galvanized Steel Wires Before Stranding) |
- |
|
|
|
| 13.5.2 (mech) (Wrapping Test Galvanized Steel Wires After Stranding) |
- |
|
|
|
| 13.6 (elec) (Resistance test-Aluminium wire before Stranding) |
- |
|
|
|
| 13.6 (elec) (Resistance test-Aluminium wire after stranding) |
- |
|
|
|
| 13.7.2 (chem) (Mass of Zinc coating) |
- |
|
|
|
| 13.7.2 (chem) (Uniformity of Zinc coating) |
- |
|
|
|
| 13.8 Table-4 (mech) (Lay Ratio- Aluminium Wire Outermost Layer) |
- |
|
|
|
| 13.8 Table-4 (mech) (Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer) |
- |
|
|
|
| 13.8 Table-4 (mech) (Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers) |
- |
|
|
|
| 13.8 Table-4 (mech) (Lay Ratio- Steel Core (6 Wire Layer)) |
- |
|
|
|
| 13.4.2 (elec) (Ductility by Elongation Test before stranding) |
- |
|
|
|
| 13.4.2 (elec) (Ductility by Elongation Test after stranding) |
- |
|
|
|
|
- |
-
" 5 m
Excluding 1.)Complete upto 100 sq mm 2.)Except surface condition test, ultimate breaking load test on stranded conductor above 100 sqmm & stress strain test on conductor |
| 13930 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 5950 (1984) |
Specification for shot firing cables (For Use Other Than In Shafts) (First Revision) |
all sizes/varieties |
Rs 11030/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1 (Conductor : Material -IS : 8130-2013) |
- |
|
|
|
| 4.1 (Insulation : Material -IS : 5831-1984) |
- |
|
|
|
| 5.1 (Sheath : materail IS : 5831-1984) |
- |
|
|
|
| 6.1 (Conductor : Construction IS : 8130-2013) |
- |
|
|
|
| 7.1 (Insulation : Application ) |
- |
|
|
|
| 7.2 (Thickness of Insulation - average ) |
- |
|
|
|
| 7.2 (Thickness of Insulation - Min. ) |
- |
|
|
|
| 7.3 (Colour of Insulation) |
- |
|
|
|
| 8.1, 9.1 (c) (Nominal radial thickness of sheath) |
- |
|
|
|
| 8.2 (Thickness of Sheath) |
- |
|
|
|
| 8.2 (Thickness of Sheath - min.) |
- |
|
|
|
| 8.3 (Colour of Sheath) |
- |
|
|
|
| 9.1 a) (Annealing test) |
- |
|
|
|
| 9.1 b) (Conductor resistance test) |
- |
|
|
|
| 9.1 d) i) (Insulation : Tensile strength) |
- |
|
|
|
| 9.1 d) i) (Insulation : elongation at break) |
- |
|
|
|
| 9.1 d) i) (Sheath : Tensile strength) |
- |
|
|
|
| 9.1 d) i) (Sheath : elongation at break) |
- |
|
|
|
| 9.1 d) ii) (Ageing in air oven - Sheath : elongation variation at break) |
- |
|
|
|
| 9.1 d) iii ) (Loss of mass test - insulation ) |
- |
|
|
|
| 9.1 d) iii ) (Loss of mass test - Sheath ) |
- |
|
|
|
| 9.1 d) iv ) (Hot deformation - insulation ) |
- |
|
|
|
| 9.1 d) iv ) (Hot deformation - sheath ) |
- |
|
|
|
| 9.1 d) v ) (Heat shock - insulation ) |
- |
|
|
|
| 9.1 d) v ) (Heat shock - Sheath ) |
- |
|
|
|
| 9.1 d) vi ) (Shrinkage - insulation ) |
- |
|
|
|
| 9.1 d) vi ) (Shrinkage - Sheath ) |
- |
|
|
|
| 9.1 d) vi ) (Shrinkage : Crack observed - insulation ) |
- |
|
|
|
| 9.1 f) (Insulation resistance test: Volume resistivity ) |
- |
|
|
|
| 9.1 f) (Insulation resistance test : IR constant) |
- |
|
|
|
| 10.4 (Flammability Test ) |
- |
|
|
|
| 10.2 (Voltage test ) |
- |
|
|
|
| 11.1 (Manufacturer’s Identification) |
- |
|
|
|
| 11.2 (Cable Code) |
- |
|
|
|
| 12.1 (packing ) |
- |
|
|
|
| 12.2 (Marking ) |
- |
|
|
|
| 12.2.1 (Standard marks ) |
- |
|
|
|
| 9.1 d) ii) (Ageing in air oven - Insulation : Tensile strength) |
- |
|
|
|
| 9.1 d) ii) (Ageing in air oven - Insulation : Tensile strength Variation) |
- |
|
|
|
| 9.1 d) ii) (Ageing in air oven - Insulation : elongation at break) |
- |
|
|
|
| 9.1 d) ii) (Ageing in air oven - Insulation : elongation variation at break) |
- |
|
|
|
|
- |
-
Complete |
| 13931 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 1703 (2000) |
Water Fittings - Copper Alloy Float Valves (Horizontal Plunger Type) - |
- |
Rs. 4800/-and testing charges as per referred ISs View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7.4 and Table 2(a) ,2(b), 3(a) & 3(b) and Fig.2 (Dimensions of Body - A) |
- |
|
|
|
| 7.4 and Table 2(a) ,2(b), 3(a) & 3(b) and Fig.2 (Dimensions of Body- B) |
- |
|
|
|
| 7.4 and Table 2(a) ,2(b), 3(a) & 3(b) and Fig.2 (Dimensions of Body - C) |
- |
|
|
|
| 7.4 and Table 2(a) ,2(b), 3(a) & 3(b) and Fig.2 (Dimensions of Body - D) |
- |
|
|
|
| 7.4 and Table 2(a) ,2(b), 3(a) & 3(b) and Fig.2 (Dimensions of Body - E) |
- |
|
|
|
| 7.4 and Table 2(a) ,2(b), 3(a) & 3(b) and Fig.2 (Dimensions of Body- F) |
- |
|
|
|
| 7.4 and Table 2(a) ,2(b), 3(a) & 3(b) and Fig.2 (Dimensions of Body- G) |
- |
|
|
|
| 7.4 and Table 2(a) ,2(b), 3(a) & 3(b) and Fig.2 (Dimensions of Body - H) |
- |
|
|
|
| 7.4 and Table 2(a) ,2(b), 3(a) & 3(b) and Fig.2 (Dimensions of Body - J) |
- |
|
|
|
| 7.4 and Table 2(a) ,2(b), 3(a) & 3(b) and Fig.2 (Dimensions of Body- K) |
- |
|
|
|
| 7.4 and Table 2(a) ,2(b), 3(a) & 3(b) and Fig.2 (Dimensions of Body - L) |
- |
|
|
|
| 7.4 and Table 2(a) ,2(b), 3(a) & 3(b) and Fig.2 (Dimensions of Body- M) |
- |
|
|
|
| 7.4 and Table 2(a) ,2(b), 3(a) & 3(b) and Fig.2 (Dimensions of Body - N) |
- |
|
|
|
| 7.4 and Table 2(a) ,2(b), 3(a) & 3(b) and Fig.2 (Dimensions of Body - P) |
- |
|
|
|
| 7.4 and Table 2(a) ,2(b), 3(a) & 3(b) and Fig.2 (Dimensions of Body- Q) |
- |
|
|
|
| 7.4 and Table 2(a) ,2(b), 3(a) & 3(b) and Fig.2 (Dimensions of Body- R) |
- |
|
|
|
| 7.6 and Table 4(a) & 4(b) (Dimensions of the piston - A) |
- |
|
|
|
| 7.6 and Table 4(a) & 4(b) (Dimensions of the piston - B) |
- |
|
|
|
| 7.6 and Table 4(a) & 4(b) (Dimensions of the piston - C) |
- |
|
|
|
| 7.6 and Table 4(a) & 4(b) (Dimensions of the piston - D) |
- |
|
|
|
| 7.6 and Table 4(a) & 4(b) (Dimensions of the piston - E) |
- |
|
|
|
| 7.6 and Table 4(a) & 4(b) (Dimensions of the piston - F) |
- |
|
|
|
| 7.6 and Table 4(a) & 4(b) (Dimensions of the piston - G) |
- |
|
|
|
| 7.6 and Table 4(a) & 4(b) (Dimensions of the piston - H) |
- |
|
|
|
| 7.6 and Table 4(a) & 4(b) (Dimensions of the piston - J) |
- |
|
|
|
| 7.7.1 and Table 5(a) & 5(b) (Dimensions of Levers- K) |
- |
|
|
|
| 7.7.1 and Table 5(a) & 5(b) (Dimensions of Levers - A) |
- |
|
|
|
| 7.7.1 and Table 5(a) & 5(b) (Dimensions of Levers- B) |
- |
|
|
|
| 7.7.1 and Table 5(a) & 5(b) (Dimensions of Levers - C) |
- |
|
|
|
| 7.7.1 and Table 5(a) & 5(b) (Dimensions of Levers - D) |
- |
|
|
|
| 7.7.1 and Table 5(a) & 5(b) (Dimensions of Levers - E) |
- |
|
|
|
| 7.7.1 and Table 5(a) & 5(b) (Dimensions of Levers- F) |
- |
|
|
|
| 7.7.1 and Table 5(a) & 5(b) (Dimensions of Levers- G) |
- |
|
|
|
| 7.7.1 and Table 5(a) & 5(b) (Dimensions of Levers- H) |
- |
|
|
|
| 7.7.1 and Table 5(a) & 5(b) (Dimensions of Levers- J) |
- |
|
|
|
| 7.7.1 and Table 5(a) & 5(b) (Dimensions of Levers- K) |
- |
|
|
|
| 7.7.1 and Table 5(a) & 5(b) (Dimensions of Levers- L) |
- |
|
|
|
| 7.7.1 and Table 5(a) & 5(b) (Dimensions of Levers- M) |
- |
|
|
|
| 7.7.1 and Table 5(a) & 5(b) (Dimensions of Levers- N) |
- |
|
|
|
| 7.7.3 (Clearance diameter different between the lever and the arm at the joint) |
- |
|
|
|
| 7.7.7 (Piston Travel) |
- |
|
|
|
| 7.9.2 (Silencing Pipes and Anti-Siphonage Provision -Diameter ofthe hole) |
- |
|
|
|
| 8.1 (Hydraulic Test) |
- |
|
|
|
| 3 (CLASSIFICATION) |
- |
|
|
|
| 4 (NOMINAL SIZES) |
- |
|
|
|
| 6 (MANUFACTURE AND WORKMANSHIP) |
- |
|
|
|
| 7.2 and Fig.1 (CONSTRUCTION) |
- |
|
|
|
|
- |
-
Except shut off and mechanical strength test, Facility for chemical testing is not available |
| 13932 |
BIS, Central Laboratory (CL)
| None
| IS 12818 (2010) |
Unplasticized polyvinyl chloride (Pvc - U) screen and casing pipes for bore/tubewells - Specification (Second Revision) |
- |
Rs.6450.00 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 9.5 (Tensile Strength
IS 12235(Part 13)) |
- |
|
|
|
| 9.6 (Vicat Softening Temperature
IS 12235 (Part 2).) |
- |
|
|
|
| 9.3 (Density
IS 12235 (Part 14)) |
- |
|
|
|
| 9.1 ( Visual Appearance) |
- |
|
|
|
| 7.2 and Table 5, 6 & 7
Fig 1B (Wall thickness, Max) |
- |
|
|
|
| 7.2 and Table 5, 6 & 7
Fig 1B (Wall thickness, Min) |
- |
|
|
|
| 7.1, 7.2 and Table 5, 6 & 7 Fig 1B (Mean outside dia over connection,mm (Take 4 reading and maximum valu reported)) |
- |
|
|
|
| 7.1 and Table 1, 2, 3, & 4
Fig 1A & 1B (Wall thickness) |
- |
|
|
|
|
- |
-
Excluding Test facility not avaialble for Cl 9.4 Resistance to External Blows ,9.7 Effect on Water; |
| 13933 |
BIS, Central Laboratory (CL)
| None
| IS 2029 (1998) |
Ring wrenches (Spanners) - Specification (Fourth Revision) |
- |
Rs.3700/- View breakup
Total Rs.300x12+100 = Rs.3700.00
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl.4 (CARBON) |
- |
|
|
|
| Cl.4 (SULPHUR) |
- |
|
|
|
| Cl.4 (PHOSPHURS) |
- |
|
|
|
| Cl.4 (MANGANESE) |
- |
|
|
|
| Cl.4 (NITROGEN) |
- |
|
|
|
| Cl.4 (SILICON) |
- |
|
|
|
| Cl.4 (ALUMINIUM) |
- |
|
|
|
| Cl.4 (CHROMIUM) |
- |
|
|
|
| Cl.4 (NICKEL) |
- |
|
|
|
| Cl.4 (VANADIUM) |
- |
|
|
|
| Cl.4 (MOLYBDENUM) |
- |
|
|
|
| 3, Table-1 (Dimensions- s1) |
- |
|
|
|
| 3, Table-1 (Dimensions- s2) |
- |
|
|
|
| 3, Table-1 (Dimensions- a) |
- |
|
|
|
| 3, Table-1 (Dimensions- b1) |
- |
|
|
|
| 3, Table-1 (Dimensions- b2) |
- |
|
|
|
| 3, Table-1 (Dimensions- L) |
- |
|
|
|
| 5 (Hardness) |
- |
|
|
|
| 6 (Workmanship and Finish) |
- |
|
|
|
| 6 (Torque Testing) |
- |
|
|
|
| 7 (Designation) |
- |
|
|
|
|
- |
-
Grade designation of material as per relevant IS may please declared.;
Excluding -; torque test |
| 13934 |
BIS, Southern Regional Laboratory (SRL)
| None
| IS 11947 (1987) |
Specification for soft magnetic iron rods, bars, flats and sections |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5 (PHYSICAL CONDITIONS) |
- |
|
|
|
| 6.1 (Tensile Strength-1608: Part 1) |
- |
|
|
|
| 6.2 (Hardness - 1586) |
- |
|
|
|
| 8.2 (Tolerances for Round Rods and Bars) |
- |
|
|
|
| 8.3 (Tolerances on Thickness for Rectangular Flat) |
- |
|
|
|
| 8.4 (Tolerances on Width for Rectangular F) |
- |
|
|
|
| 8.6 (Tolerance on Length-for-Rods, Bars, Flats and Section) |
- |
|
|
|
| 8.7 (Tolerance on Straightness of Bars) |
- |
|
|
|
| 8.8 (Tolerance on Out-of-Roundness) |
- |
|
|
|
|
- |
-
" mech - 2 x 500 mm
Excluding except bend test and chemical tests |
| 13935 |
BIS, Southern Regional Laboratory (SRL)
| None
| IS 12146 (1987) |
Specification for carbon manganese steel forgings for pressure vessels |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 8 (Freedom from defects) |
- |
|
|
|
| 6.1, Table 3 (Tensile Test-1608:Part 1) |
- |
|
|
|
| 6.1, Table 3 (Yield Strength, Mpa) |
- |
|
|
|
| 6.1, Table 3 (Elongation, %) |
- |
|
|
|
| 6.1, Table 3 (Reduction in area, Percent) |
- |
|
|
|
| 6.1, Table 3 (Impact Test) |
- |
|
|
|
|
- |
-
" mech - 100 gm drillings "
Excluding except ultrasonic test and Chemical tests |
| 13936 |
BIS, Southern Regional Laboratory (SRL)
| None
| IS 14542 (1998) |
Partly skimmed milk powder specification |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 6.6.1 (Bacterial Count (IS 5402)) |
- |
|
|
|
| Cl 6.6.2 (Coliform Count ((IS 5402)) |
- |
|
|
|
| Table 1(iii) (Milk fat, Type I (IS I1722)) |
- |
|
|
|
| Table 1(iii) (Milk fat, Type II (IS I1722)) |
- |
|
|
|
| Table 1(iv) (Insolubility index, a) Roller dried Type I (IS 12759)) |
- |
|
|
|
| Table 1(iv) (Insolubility index, a) Roller dried Type II (IS 12759)) |
- |
|
|
|
| Table 1(iv) (Insolubility index, b) Spray dried Type I (IS 12759)) |
- |
|
|
|
| Table 1(iv) (Insolubility index, b) Spray dried Type II (IS 12759)) |
- |
|
|
|
| Table 1(v) (Total ash Type I (Annex B of IS 14433 - Part 1)) |
- |
|
|
|
| Table 1(v) (Total ash Type II (Annex B of IS 14433 - Part 1)) |
- |
|
|
|
| Table 1(vi) (Titratable acidity (as lactic acid) Type I (IS 11766)) |
- |
|
|
|
| Table 1(vi) (Titratable acidity (as lactic acid) Type II (IS 11766)) |
- |
|
|
|
| Cl 6.4 (Flavour and Taste (IS 10030)) |
- |
|
|
|
|
- |
-
" 2 x 500 g " |
| 13937 |
BIS, Southern Regional Laboratory (SRL)
| None
| IS 4505 (2015) |
Sodium formaldehyde sulphoxylate - Specification (First Revision) |
- |
Please see remarks. View breakup
the testing charges for the product are Rs. 4480/-.
Testing Charges for keeping quality: Rs. 4330/-.
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl no 4.1 (Description ) |
- |
|
|
|
| Cl no 4.2 (Description ) |
- |
|
|
|
| Cl no 4.3 [ Table 1, Sl no.(i) ] Annex A-2 Grade-1 (Sodium formaldehyde sulphoxylate dihydrate (NaHSO2.CH2O.2H2O)) |
- |
|
|
|
|
- |
-
" 500 g x 2 1 pack for keeping quality test as per clause 5 " |
| 13938 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 398 : Part 5 (1992) |
Aluminium conductor for overhead transmission purposes - Specification: Part 5 aluminium conductors - Galvanized steel - Reinforced for extra high voltage (400 KV And Above) (First Revision) |
- |
11400 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7 (elec) (Freedom from
defects) |
- |
|
|
|
| 13.2 (mech) (Visual Examination) |
- |
|
|
|
| 13.3 Table-1 (mech) (Diameter-Aluminium wires) |
- |
|
|
|
| 13.3 Table-2 (mech) (Diameter-Galvanized Steel wires) |
- |
|
|
|
| 13.5.2 Table 1 (mech) (Breaking Load of Aluminium Wires Before Stranding) |
- |
|
|
|
| 13.5.2 Table 2 (mech) (Breaking Load of Steel Wires Before Stranding) |
- |
|
|
|
| 13.5.2 Table 1 (mech) (Breaking Load of Aluminium Wires After Stranding) |
- |
|
|
|
| 13.5.2 Table 2 (mech) (Breaking Load of Steel Wires After Stranding) |
- |
|
|
|
| 13.6.1 (mech) (Ductility by Torsion Test before stranding) |
- |
|
|
|
| 13.6.1 (mech) (Ductility by Torsion Test after stranding) |
- |
|
|
|
| 13.6.2 (mech) (Ductility by Elongation Test before stranding) |
- |
|
|
|
| 13.6.2 (mech) (Ductility by Elongation Test after stranding) |
- |
|
|
|
| 13.6.2 (mech) (Ductility by Elongation Test before stranding) |
- |
|
|
|
| 13.6.2 (mech) (Ductility by Elongation Test after stranding) |
- |
|
|
|
| 13.7.1 (mech) (Wrapping Test Aluminium Wires Before Stranding) |
- |
|
|
|
| 13.7.1 (mech) (Wrapping Test Aluminium Wires After Stranding) |
- |
|
|
|
| 13.7.2 (mech) (Wrapping Test Galvanized Steel Wires Before Stranding) |
- |
|
|
|
| 13.7.2 (mech) (Wrapping Test Galvanized Steel Wires After Stranding) |
- |
|
|
|
| 13.8 (elec) (Resistance test-Aluminium wire before Stranding) |
- |
|
|
|
| 14.8 (elec) (Resistance test-Aluminium wire after stranding) |
- |
|
|
|
| 13.9.2 (chem) (Mass of Zinc coating) |
- |
|
|
|
| 13.9.2 (chem) (Uniformity of Zinc coating) |
- |
|
|
|
| 13.4 Table-4 (mech) (Lay Ratio- Aluminium Wire Outermost Layer) |
- |
|
|
|
| 13.4 Table-4 (mech) (Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer) |
- |
|
|
|
| 13.4 Table-4 (mech) (Lay Ratio- Aluminium Wire Innermost Layer of Conductors eith 3 Aluminium Wire Layers) |
- |
|
|
|
| 13.4 Table-4 (mech) (Lay Ratio- Steel Core (6 Wire Layer)) |
- |
|
|
|
| 13.9.2 (chem) (Mass of Zinc coating) |
- |
|
|
|
| 13.9.2 (chem) (Uniformity of Zinc coating) |
- |
|
|
|
|
- |
-
Except Cl.13.10 surface condition test ,Cl.13.11 corona test ,Cl.13.12 radio interference test for 400 kV & above.,CI.13.5 Stress Strain Test |
| 13939 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 398 : Part 4 (1994) |
Aluminium conductors for overhead transmission purposes: Part 4 aluminium alloy stranded conductors (Aluminium - Magnesium - Silicon Type) - Specification (Third Revision) |
- |
Rs 825/- upto 7 wires, Rs 1425/- upto 19 wires View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.1 (Freedom from Defects) |
- |
|
|
|
| 7.1 Table-1 (Dimensional measurement of wires) |
- |
|
|
|
| 7.2.2 Table-2, Table-4 (Calculated resistance of Stranded Conductor) |
- |
|
|
|
| 8.1 (Joints in wires-Conductors Containing Seven Wires) |
- |
|
|
|
| 8.2 (Joints in wires-Conductors Containing More Than Seven Wires) |
- |
|
|
|
| 9.1 (Stranding) |
- |
|
|
|
| 9.2 Table 3 (Lay Ratio of stranded conductors) |
- |
|
|
|
| 9.3 (Direction of Lay) |
- |
|
|
|
| 9.4 (Multiple layers of wires) |
- |
|
|
|
| 11 (Packing and Marking) |
- |
|
|
|
| 12.2 Table 1 (Breaking Load Test- Before Stranding) |
- |
|
|
|
| 12.2 Table 1 (Breaking Load Test- After Stranding) |
- |
|
|
|
| 12.3 Table 1 (Elongation Test- Before Stranding) |
- |
|
|
|
| 12.3 Table 1 (Elongation Test- After Stranding) |
- |
|
|
|
| 12.4 Table 1 (Resistance of Aluminium wire) |
- |
|
|
|
|
- |
-
Test facility is complete |
| 13940 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 1673 (1984) |
Spectfication for mild steel wire, cold heading quality (Second Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7.1 (i)Ultimate Tensile Strength,) |
- |
|
|
|
| 7.2 (ii) Reverse Torsion Test) |
- |
|
|
|
| 8 ( DIMENSIONS AND TOLERANCES) |
- |
|
|
|
| 6 (FREEDOM FROM DEFECTS) |
- |
|
|
|
| Cl. 5.1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 5.1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 5.1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 5.1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 5.1 (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
|
- |
-
- |
| 13941 |
BIS, Southern Regional Laboratory (SRL)
| None
| IS 336 (1973) |
Specification for ether |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl no .3.1 (Description) |
- |
|
|
|
| Cl no .3.2 (Odour and Taste ) |
- |
|
|
|
| Cl No. 3.2.1 (Ether , anaesthetic) |
- |
|
|
|
| Cl no .3.3.1 (Composition ) |
- |
|
|
|
| Cl no .3.3.2 (Composition ) |
- |
|
|
|
| Cl no .3.4 (Solubility ) |
- |
|
|
|
| Cl no .3.5 [ Table 1, Sl no.(ii) ] Appendix A 3 (Peroxides ) |
- |
|
|
|
| Cl no .3.5 [ Table 1, Sl no.(iv) ] Appendix A 5 (Residue on Evaporation ) |
- |
|
|
|
| Cl no .3.5 [ Table 1, Sl no.(v) ] Appendix A 6 (Methyl alcohol ) |
- |
|
|
|
| Cl no .3.5 [ Table 1, Sl no.(vi) ] Appendix A 7 (Aldehydes and acetone ) |
- |
|
|
|
| Cl no .3.5 [ Table 1, Sl no.(vii) ] Appendix A 8 (Sulphurous acids and other free acids ) |
- |
|
|
|
|
- |
-
" 500 ml x 2
Excluding except distillation range, relative density |
| 13942 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 14255 (1995) |
Aertal bunched cables - For working voltages up to and including 1100 Volts - Specification |
complete for Cat 01(Except melt flow, vicat, bending) |
Please see remarks View breakup
Rs.16650.00 for XLPE insulated single core cable
Rs.15150.00 for PE insulated single core cable
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1 (Insulation) |
- |
|
|
|
| 6.1 (Flexibility class) |
- |
|
|
|
| 6.2 (Compactness) |
- |
|
|
|
| 6.2 (No of strands) |
- |
|
|
|
| 6.2 (Surface) |
- |
|
|
|
| 6.3 (Protective barrier) |
- |
|
|
|
| 6.4 (size of street lighting conductor) |
- |
|
|
|
| 6.5 (Size of messenger conductor ) |
- |
|
|
|
| 6.6 (Joints in messenger conductor ) |
- |
|
|
|
| 6.6 (Direction of outer layer) |
- |
|
|
|
| 7.2 ( Thickness of insulation) |
- |
|
|
|
| 7.3 (Tolerance on thickness of insulation ) |
- |
|
|
|
| 7.4 (Aplication of the insulation ) |
- |
|
|
|
| 7.5 (Colour of the insulation ) |
- |
|
|
|
| 8.1 (Core identification) |
- |
|
|
|
| 8.2 (Core identification) |
- |
|
|
|
| 8.3 (Identification by other means) |
- |
|
|
|
| 9.1 (Assembly (Laying up)) |
- |
|
|
|
| 9.2 (Assembly (Laying up)) |
- |
|
|
|
| 9.3 (Direction of lay) |
- |
|
|
|
| 10.1 a) i) (Tests on phase/street light conductor: tensile test - Test method IS10810:Part 2) |
- |
|
|
|
| 10.1 a) ii) (Wrapping test - 10810: Part 3) |
- |
|
|
|
| 10.1 a) iii) (Resistance test - IS10810: Part 5) |
- |
|
|
|
| 10.1 b) i) (Test on messenger conductor: Breaking load - IS 10810: Part 2) |
- |
|
|
|
| 10.1 b) ii) (Test on messenger conductor: Elongation test - Cl 11.3) |
- |
|
|
|
| 10.1 b) iii) (Test on messenger conductor: Resistance test - IS 10810: Part 5) |
- |
|
|
|
| 10.1 c) i) (Physical tests for XLPE Insulation:
Tensile strength - IS 10810: Part 7) |
- |
|
|
|
| 10.1 c) i) (Physical tests for XLPE Insulation:
elongation at break - IS 10810: part 7) |
- |
|
|
|
| 10.1 c) ii) (Ageing in air oven : Tensile strength variation - IS 10810:Part 11) |
- |
|
|
|
| 10.1 c) ii) (Ageing in air oven : Elongation variation- IS 10810: Part 11) |
- |
|
|
|
| 10.1 c) iii) (Hot set test: Elongation under load - IS 10810: Part 30) |
- |
|
|
|
| 10.1 c) iii) (Hot set test: Permanent elongation (set) after cooling - IS 10810: Part 30) |
- |
|
|
|
| 10.1 c) iv) (Shrinkage test : Shrinkage - 10810:Part 12) |
- |
|
|
|
| 10.1 c) iv) (Shrinkage test : Crack Observed - 10810:Part 12) |
- |
|
|
|
| 10.1 c) v) (Water ahsorption (Gravimetric) - IS 10810: Part 33 ) |
- |
|
|
|
| 10.1 d) i) (Physical test for PE insulation:
Tensile strength - IS 10810: Part 7 ) |
- |
|
|
|
| 10.1 d) i) (Physical test for PE insulation: elongation at break - IS 10810: Part 7) |
- |
|
|
|
| 10.1 f) (Insulation resistance (Volume resistivity) test a) volume resistivity at 27°C - IS 10810: Part 43) |
- |
|
|
|
| 10.1 f) (Insulation resistance (Volume resistivity) test b) volume resistivity at 70°C - IS 10810: Part 43) |
- |
|
|
|
| 10.1 g) (High voltage test - IS10810:Part 45) |
- |
|
|
|
|
- |
-
Facility not available for breaking load of messenger conductor, Carbon Black test, Vicat Test, Environmental stress cracking for PE insulation. For XLPE water absorption test facility available upto 25 sq.mm. (Facility for nominal area of conductor, Tensile & Elongation above 2.0 mm thickness is not available). 5 mtr Aluminium wire before stranding to be provided additionally. |
| 13943 |
BIS, Southern Regional Laboratory (SRL)
| None
| IS 1161 (2014) |
Steel tubes for structural purposes - Specification (Fifth Revision) |
- |
5725 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 6 (Outer Diameter, Thickness & Mass) |
- |
|
|
|
| Cl 7 (Workmanship) |
- |
|
|
|
| Cl 11 (Tensile Test, Flattening Test & Cold Bend Test) |
- |
|
|
|
| 5 AND AS PER IS 10748 (COPPER) |
- |
|
|
|
| 5 AND AS PER IS 10748 (MICRO ALLOY) |
- |
|
|
|
| 5 AND AS PER IS 10748 (CARBON EQUIVALENT) |
- |
|
|
|
| 5 AND AS PER IS 10748 (CARBON) |
- |
|
|
|
| Clause - 5.1, Table-3 ( ALUMINIUM) |
- |
|
|
|
| Clause - 5.1, Table-3 (SILICON) |
- |
|
|
|
| Clause - 5.1, Table-3 (NITROGEN) |
- |
|
|
|
| Clause - 5.1, Table-3 (MANGANESE) |
- |
|
|
|
| Clause - 5.1, Table-3 (PHOSPHURS) |
- |
|
|
|
| Clause - 5.1, Table-3 (SULPHUR) |
- |
|
|
|
|
- |
-
" mech - 1.5 m Chemical Facility is available Quantity: 5 Pieces of 5cm X 5cm
Excluding except cold bend test |
| 13944 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 1610 (2018) |
Household sewing machines - General requirements (Fourth Revision) |
- |
- View breakup
Rs 5020/- + charges as per relevant ISS For Plating: Rs 2050 per part of the sample
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1 (Driving arrangement Hand Operated Sewing Machine) |
- |
|
|
|
| 4.1 (Sewing Mechanism Design ) |
- |
|
|
|
| 4.2 (Sewing Mechanism Reverse stitch mechanism ) |
- |
|
|
|
| 4.2.1 (Sewing Mechanism Stitch Regulator) |
- |
|
|
|
| 4.3 (Sewing Mechanism Thread Tension) |
- |
|
|
|
| 4.4 (Sewing Mechanism Timing) |
- |
|
|
|
| 4.7 (Sewing Mechanism Thread Spool Pin) |
- |
|
|
|
| 6 (Lubrication) |
- |
|
|
|
| 8 (WORKMANSHIP AND FINISH) |
- |
|
|
|
| 8 (WORKMANSHIP AND FINISH) |
- |
|
|
|
| 8 (WORKMANSHIP AND FINISH) |
- |
|
|
|
| 10.1 IS 7491 (Accuracy Requirement Functional Dimension Feed Dog Measuring Condition - Feed dog raised to its highest position ) |
- |
|
|
|
| 10.1 IS 7491 (Accuracy Requirement Functional Dimension Shuttle and shuttle driver Measuring Condition - Shuttle heel at bottom - most position) |
- |
|
|
|
| 10.1 IS 7491 (Accuracy Requirement Functional Dimension Presser foot Measuring Condition - Presser foot in lifted condition) |
- |
|
|
|
| 10.1 IS 7491 (Accuracy Requirement Assembly Clearance Needle bar Measuring Condition - Needle bar at lower-most condition) |
- |
|
|
|
| 10.1 IS 7491 (Accuracy Requirement Assembly Clearance Needle bar Measuring Condition - Needle bar at lower-most condition) |
- |
|
|
|
| 10.1 IS 7491 (Accuracy Requirement Assembly Clearance Thread take up lever Measuring Condition - Thread take up lever at top and intermediate position) |
- |
|
|
|
| 10.1 IS 7491 (Accuracy Requirement Assembly Clearance Thread take up lever Measuring Condition - Thread take up lever at top and intermediate position) |
- |
|
|
|
| 10.1 IS 7491 (Accuracy Requirement Assembly Clearance Shuttle Measuring Condition - Difference between highest & lowest position of needle bar.) |
- |
|
|
|
| 10.1 IS 7491 (Accuracy Requirement Assembly Clearance Shuttle Measuring Condition - Tip of pin at top most bottom most position of needle bar) |
- |
|
|
|
| 10.1 IS 7491 (Accuracy Requirement Assembly Clearance Shuttle Measuring Condition - Difference between highest & lowest position of needle bar.) |
- |
|
|
|
| 10.1 IS 7491 (Accuracy Requirement Assembly Clearance Arm shaft Measuring Condition -At different fly wheel position (turn fly wheel by hand) axial push./pull to be given) |
- |
|
|
|
| 10.1 IS 7491 (Accuracy Requirement Assembly Clearance Flywheel Measuring Condition - Rotate flywheel to Radially measure eccentrity) |
- |
|
|
|
| 10.1 IS 7491 (Accuracy Requirement Assembly Clearance Feed section Measuring Condition - At its highest position above needle place) |
- |
|
|
|
| 10.2 IS 7492 (Sewing Requirement) |
- |
|
|
|
| 10.2 IS 7492 (Sewing Requirement) |
- |
|
|
|
| 10.2 IS 7492 (Sewing Requirement) |
- |
|
|
|
| 10.2 IS 7492 (Sewing Requirement) |
- |
|
|
|
| 10.2 IS 7492 (Sewing Requirement) |
- |
|
|
|
| 10.3 IS 7493 (Durability Requirement Needle bar Measuring Condition - Needle bar at lower-most condition) |
- |
|
|
|
| 10.1 IS 7491 (Accuracy Requirement Functional Dimension Shuttle and shuttle driver Measuring Condition - Shuttle heel at bottom - most position) |
- |
|
|
|
| 10.3 IS 7493 (Durability Requirement Thread take up lever Measuring Condition - Thread take up lever at top and intermediate position) |
- |
|
|
|
| 10.3 IS 7493 (Durability Requirement Thread take up lever Measuring Condition - Thread take up lever at top and intermediate position) |
- |
|
|
|
| 10.3 IS 7493 (Durability Requirement Shuttle Measuring Condition - Tip of pin at top most bottom most position of needle bar) |
- |
|
|
|
| 10.3 IS 7493 (Accuracy Requirement Assembly Clearance Shuttle Measuring Condition - Difference between two indicator readings when needle bar is at its highest
and lowest position) |
- |
|
|
|
| 10.3 IS 7493 (Durability requirement Arm shaft Measuring Condition -At different fly wheel position (turn fly wheel by hand) axial push./pull to be given) |
- |
|
|
|
| 10.3 IS 7493 (Durability Requirement Feed section Measuring Condition - At its highest position above needle place) |
- |
|
|
|
| 12 (Marking) |
- |
|
|
|
| 12 (Marking) |
- |
|
|
|
|
- |
-
Test facility is complete |
| 13945 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 398 : Part 2 (1996) |
Aluminium conductors for overhead transmission purposes - Specification: Part 2 aluminium conuuctors, galvanized steel - Reinforced (Third Revision) |
- |
Please see remarks. View breakup
(I) For galvanized steel core only (consisting of 7 steel strands)- Rs.2850.00, (II) For galvanized steel reinforced stranded conductors with nominal aluminium area upto and including 100mm2-(a) For single steel wire core (1 steel + 6 Aluminium)- Rs. 1950.00 (b) For 7 wire core (7 steel + 6 Aluminium) - Rs. 4000.00, (III) For galvanized steel reinforced stranded conductors with nominal aluminium area more than 100mm2 (excluding special tests as per Cl. 13.9, 13.10 & 13.11)-(a) For stranded conductors with 37 strands-Rs.7900/-, (b) For stranded conductors with 49 strands-Rs.10000/-, (c) For stranded conductors with 61 strands-Rs.11100/-,
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 8.1.1 & 13.2 Table-1 (mech) (Diameter of Aluminium Wires Before Stranding) |
- |
|
|
|
| 8.1.1 & 13.2 Table-1 (mech) (Diameter of Aluminium Wires After Stranding) |
- |
|
|
|
| 8.1.1 & 13.2 Table 2 (mech) (Diameter of Steel Wires Before Stranding) |
- |
|
|
|
| 8.1.1 & 13.2 Table-1 (mech) (Diameter of Aluminium Wires After Stranding) |
- |
|
|
|
| 8.1.1 & 13.2 Table 2 (mech) (Diameter of Steel Wires After Stranding) |
- |
|
|
|
| 10 (elec) (Stranding) |
- |
|
|
|
| 10 (elec) (Stranding) |
- |
|
|
|
| 10 (elec) (Stranding) |
- |
|
|
|
| 10 (mech) (Stranding) |
- |
|
|
|
| 13.3 Table 1 (mech) (Breaking Load of Aluminium Wires Before Stranding) |
- |
|
|
|
| 13.3 Table 2 (mech) (Breaking Load of Steel Wires Before Stranding) |
- |
|
|
|
| 13.3 Table 1 (mech) (Breaking Load of Aluminium Wires After Stranding) |
- |
|
|
|
| 13.3 Table 2 (mech) (Breaking Load of Steel Wires After Stranding) |
- |
|
|
|
| 13.4.1 (mech) (Ductility by Torsion Test before stranding) |
- |
|
|
|
| 13.4.1 (mech) (Ductility by Torsion Test before stranding) |
- |
|
|
|
| 13.4.1 (mech) (Ductility by Torsion Test after stranding) |
- |
|
|
|
| 13.4.1 (mech) (Ductility by Torsion Test after stranding) |
- |
|
|
|
| 13.4.1 (mech) (Ductility by Torsion Test before stranding) |
- |
|
|
|
| 13.4.1 (mech) (Ductility by Torsion Test before stranding) |
- |
|
|
|
| 13.4.1 (mech) (Ductility by Torsion Test after stranding) |
- |
|
|
|
| 13.4.1 (mech) (Ductility by Torsion Test after stranding) |
- |
|
|
|
| 13.4.2 (elec) (Ductility by Elongation Test before stranding) |
- |
|
|
|
| 13.5.1 (mech) (Wrapping Test Aluminium Wires After Stranding) |
- |
|
|
|
| 13.4.2 (elec) (Ductility by Elongation Test after stranding) |
- |
|
|
|
| 13.5.1 (mech) (Wrapping Test Aluminium Wires After Stranding) |
- |
|
|
|
| 13.5.1 (mech) (Wrapping Test Aluminium Wires Before Stranding) |
- |
|
|
|
| 13.5.1 (mech) (Wrapping Test Aluminium Wires After Stranding) |
- |
|
|
|
| 13.5.2 (mech) (Wrapping Test Galvanized Steel Wires After Stranding) |
- |
|
|
|
| 13.5.2 (mech) (Wrapping Test Galvanized Steel Wires Before Stranding) |
- |
|
|
|
| 13.5.2 (mech) (Wrapping Test Galvanized Steel Wires After Stranding) |
- |
|
|
|
| 13.6 (elec) (Resistance test-Aluminium wire before Stranding) |
- |
|
|
|
| 13.6 (elec) (Resistance test-Aluminium wire after stranding) |
- |
|
|
|
| 13.7.2 (chem) (Mass of Zinc coating) |
- |
|
|
|
| 13.7.2 (chem) (Uniformity of Zinc coating) |
- |
|
|
|
| 13.8 Table-4 (mech) (Lay Ratio- Aluminium Wire Outermost Layer) |
- |
|
|
|
| 13.8 Table-4 (mech) (Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer) |
- |
|
|
|
| 13.8 Table-4 (mech) (Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers) |
- |
|
|
|
| 13.8 Table-4 (mech) (Lay Ratio- Steel Core (6 Wire Layer)) |
- |
|
|
|
| 13.7.2 (chem) (Mass of Zinc coating) |
- |
|
|
|
| 13.7.2 (chem) (Uniformity of Zinc coating) |
- |
|
|
|
|
- |
-
Excluding
1.)Complete Upto 100 sq. mm
2.) Above 100 Sq .mm Except
Cl.13.9 surface condition test
Cl.13.10 ultimate breaking load test on
stranded conductor above 100 mm sq
Cl.13.11 stress strain test on conductor |
| 13946 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 1341 (2018) |
Steel Butt Hinges - Specification (Sixth Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1 Tables 2 to 9 (3) (Length A) |
- |
|
|
|
| 5.1 Tables 2 to 9 (4) (Breadth B) |
- |
|
|
|
| 5.1 Tables 2 to 9 (4) (Breadth B1) |
- |
|
|
|
| 5.1 Tables 2 to 9 (4) (Breadth B2) |
- |
|
|
|
| 5.1 Tables 2 to 9 (5) (Thickness of Flap C) |
- |
|
|
|
| 5.1 Tables 2 to 9 (6) (Diameter of Hinge Pin D) |
- |
|
|
|
| 6.4.2 (X) |
- |
|
|
|
| 6.4.2 (Y) |
- |
|
|
|
| 6.4.2 (Z) |
- |
|
|
|
| 3 Tables 2 to 9 (Types) |
- |
|
|
|
| 5.1 Tables 2 to 9 (2) (Size of Hinge) |
- |
|
|
|
| 5.1 Tables 2 to 9 (7) (Number of Knuckles) |
- |
|
|
|
| 5.1 Tables 2 to 9 (8) (Number of Screw Holes) |
- |
|
|
|
| 5.1 Tables 2 to 9 (9) (Holes for Screw No.) |
- |
|
|
|
| 6.1 (General) |
- |
|
|
|
| 6.2.1 (Knuckles) |
- |
|
|
|
| 6.3 (Pins) |
- |
|
|
|
| 6.4 (Screw Holes) |
- |
|
|
|
| 6.4.2 (Position of Holes) |
- |
|
|
|
| TABLE-1 (Clause-4) ( CARBON) |
- |
|
|
|
| TABLE-1 (Clause-4) (SULPHUR) |
- |
|
|
|
| TABLE-1 (Clause-4) (MANGANESE) |
- |
|
|
|
| TABLE-1 (Clause-4) (PHOSPHURS) |
- |
|
|
|
| Cl 4 & Table 1 (Silicon- IS 228(Part 2)) |
- |
|
|
|
| Clause 4 Table 1 (Nitrogen ( Flap)) |
- |
|
|
|
| TABLE-1 (Clause-4) (TITANIUM) |
- |
|
|
|
| TABLE-1 (Clause-4) (VANADIUM) |
- |
|
|
|
| TABLE-1 (Clause-4) (NIOBIUM) |
- |
|
|
|
| TABLE-1 (Clause-4) (Molybdenum) |
- |
|
|
|
| TABLE-1 (Clause-4) (Chromium) |
- |
|
|
|
| TABLE-1 (Clause-4) (Nickel) |
- |
|
|
|
| TABLE-1 (Clause-4) ( ALUMINIUM) |
- |
|
|
|
| Clause 4 Table 1 (Manganese ( Pin)) |
- |
|
|
|
| Clause 4 Table 1 (Phosphorus ( Pin)) |
- |
|
|
|
| Clause 4 Table 1 (Sulphur ( Pin)) |
- |
|
|
|
| Clause 4 Table 1 (Carbon ( Pin)) |
- |
|
|
|
| Clause 4 Table 1 (Nitrogen ( Flap)) |
- |
|
|
|
| Clause 4 Table 1 (Manganese ( Flap)) |
- |
|
|
|
| Clause 4 Table 1 (Phosphorus ( Flap)) |
- |
|
|
|
| Clause 4 Table 1 (Sulphur ( Flap)) |
- |
|
|
|
| Clause 4 Table 1 (Carbon ( Flap)) |
- |
|
|
|
|
- |
-
Test facility is complete for mechanical
Except Microalloying Elements |
| 13947 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 398 : Part 1 (1996) |
Aluminium conductors for overhead transmission purposes - Specification: Part 1 aluminium stranded conductors (Third Revision) |
- |
Rs.1600/- for 7 strands, Rs.3750/- for 19 strands View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 12.2, Table-1 (Measurement of diameter of individual aluminium wire) |
- |
|
|
|
| 12.3, Table-1 (Breaking load before stranding) |
- |
|
|
|
| 12.3, Table-1 (Breaking load after stranding) |
- |
|
|
|
| 12.4 (Wrapping test) |
- |
|
|
|
| 12.5, Table 1 (Resistance test) |
- |
|
|
|
| 12.6, Table 3 (Measurement of lay ratio) |
- |
|
|
|
| 9.3 (Stranding) |
- |
|
|
|
| 6 (Freedom from defects) |
- |
|
|
|
|
- |
-
Test facility is complete |
| 13948 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 1328 (1996) |
Veneered Decorative Plywood -Specification |
- |
Please see remarks View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7.1.1 (Requirements - Open splits, checks or open joints - For Type 1 - Cl. 7.1.1) |
- |
|
|
|
| 7.2.1 (Requirements - Open splits, checks or open joints - For Type 2 - Cl. 7.2.1) |
- |
|
|
|
| 7.2.2 (Requirements - Other defects - For Type 2 - Cl. 7.2.2.) |
- |
|
|
|
| 8 (Dimensions & Tolerances - Length - Cl. 8) |
- |
|
|
|
| 8 (Dimensions & Tolerances - Width - Cl. 8) |
- |
|
|
|
| 8 (Dimensions & Tolerances - Thickness - Cl. 8) |
- |
|
|
|
| 8 (Dimensions & Tolerances - Edge Straightness - Annexure C) |
- |
|
|
|
| 8 (Dimensions & Tolerances - Squareness - Annexure C) |
- |
|
|
|
| 11 (Tests - Moisture Content - Part 1 of IS 1734) |
- |
|
|
|
| 11 (Tests - Water Resistance Test - Cl. 11.1.2.1 [for MR Grade]) |
- |
|
|
|
| 11 (Tests - Water Resistance Test - Cl. 11.1.2.2 [for BWR Grade]) |
- |
|
|
|
| 4.1 (Grade - For BWR) |
- |
|
|
|
| 4.1 (Grade - For MR) |
- |
|
|
|
| 4.2 (Type - For Type 1) |
- |
|
|
|
| 4.2 (Type - For Type 2) |
- |
|
|
|
| 7.1.2 (Requirements - Other defects - For Type 1 - Cl. 7.1.2) |
- |
|
|
|
| 7.2.3 (Requirements - Other Charcteristics and Manufacturing Defects - For Type 2 - Cl. 7.2.3) |
- |
|
|
|
| 9 (Finish - Cl. 9.1, 8.3) |
- |
|
|
|
| 9 (Finish - Cl. 9.2, 8.3) |
- |
|
|
|
|
- |
-
Test facility is complete |
| 13949 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 13095 (1991) |
Butterfly valves for general purposes |
- |
Rs3300/-t View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4 (VALVE END CONNECTIONS) |
- |
|
|
|
| 5 (SERVICE APPLICATIONS) |
- |
|
|
|
| 6 ( NOMINAL SIZES ) |
- |
|
|
|
| 7 (NOMINAL PRESSURES) |
- |
|
|
|
| 7.2 (Class designations) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
- Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)-
Flange-D) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
- Integral Grey Cast Iron Flanges-IS 6418 (Table 2/3/6/7/10)-
Flange-b) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
- Integral Grey Cast Iron Flanges-IS 6418 (Table 2/3/6/7/10)-
Rasied Face-d4) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
- Integral Grey Cast Iron Flanges-IS 6418 (Table 2/3/6/7/10)-
Rasied Face-f) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
- Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)-
Bolting ) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
- Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)-
Drilling -Nos. ) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
- Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)-
Drilling -d2) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
- Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)-
Drilling -k) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
- Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)-
Neck -d3) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
- Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)-
Neck- r) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
-Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)-
Flange-D) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
-Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)-
Flange-b) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
-Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)-
Rasied Face-d4) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
-Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)-
Raised Face - f) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
-Integral Steel Flanges- IS 6392 (Table 15/21/26)-
Bolting) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
-Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)-
Drilling -Nos. ) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
-Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)-
Drilling -d2 ) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
- Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)-
Drilling -k) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
-Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)-
Neck -d3) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
-Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)-
Neck-r) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
-Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)-
Pipe O.D.- d1) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
-Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)-
Flange - D) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
-Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)-
Flange - b) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
-Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)-
Raised Face - d4) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
-Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)-
Raised Face - f) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
-Integral Steel Flanges- IS 6392 (Table 15/21/26)-
Drilling - Nos.) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
-Integral Steel Flanges- IS 6392 (Table 15/21/26)-
Drilling -d2) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
-Integral Steel Flanges- IS 6392 (Table 15/21/26)-
Drilling -k) |
- |
|
|
|
| 9.1.1 ( Double Flanged Body Ends) |
- |
|
|
|
| 9.2.2 (Wafer Body Ends) |
- |
|
|
|
| 10.1 -Table1 (FACE TO FACE DIMENSIONS) |
- |
|
|
|
| 11 (Bodies) |
- |
|
|
|
| 12 (DISC AND SHAFT) |
- |
|
|
|
| 13 (SEATING AND LININGS) |
- |
|
|
|
| 14.2 (BEARINGS) |
- |
|
|
|
| 14.3 (BEARINGS) |
- |
|
|
|
| 16 (OPERATION) |
- |
|
|
|
| 17.1 (Performance Testing) |
- |
|
|
|
| 17.2 (Body Test) |
- |
|
|
|
| 17.3 (Seat Test) |
- |
|
|
|
| 17.4 (Disc Strength Test) |
- |
|
|
|
|
- |
-
Except Microalloying Elements |
| 13950 |
BIS, Central Laboratory (CL)
| None
| IS 8944 (2005) |
Chlorpyrifos, emulsifiable concentrates - Specification (First Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.2.1 (Description) |
- |
|
|
|
| 3.2.2 (Cold Test) |
- |
|
|
|
| 3.2.3 (Flash Point (Abel)) |
- |
|
|
|
| 3.2.4 (Emulsion Stability) |
- |
|
|
|
| 3.3.1 (Chloropyrifos content) |
- |
|
|
|
| 3.3.2 (Acidity (as H2SO4), ) |
- |
|
|
|
|
- |
-
Excluding Cl. 3.3.1 Content; |
