| 14731 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 1785 : Part 1 (1983) |
Specification for plain hard - Drawn steel wire for prestressed concrete: Part 1 cold drawn stress - Relieved wire (Second Revision) |
- |
Rs. 27300.00 (Complete testing charges) Rs. 9300.00 (F View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 5.1 (Diameter) |
- |
|
|
|
| Cl 6.1 (Tensile Test On UTM) |
- |
|
|
|
| Cl 6.2 (Tensile Test On UTM) |
- |
|
|
|
| Cl 6.4 (Tensile Test On UTM) |
- |
|
|
|
| Clause 3.1.1 (Phosphorus) |
- |
|
|
|
| Clause 3.1.1 (Sulphur) |
- |
|
|
|
|
- |
-
Test facilities are not available for the following:
1. Tensile Test |
| 14732 |
BIS, Central Laboratory (CL)
| None
| IS 2255 (1977) |
Specification for mild steel wire rod for the manufacture of machine screws (By Cold Heading Process) (Second Revision) |
- |
Rs. 600/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl. 5.1 (Carbon- Relevant parts of IS 228.) |
- |
|
|
|
| Cl. 5.1 (Manganese- Relevant parts of IS 228.) |
- |
|
|
|
| Cl. 5.1 (Sulphur- Relevant parts of IS 228.) |
- |
|
|
|
| Cl. 5.1 (Phosphorus- Relevant parts of IS 228.) |
- |
|
|
|
|
- |
-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm; |
| 14733 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 1784 (2020) |
Screwed Closures for Drums — Specification ( Fourth Revision ) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6 (Dimensions-Steel flange- d1) |
- |
|
|
|
| 6 (Dimensions-Steel flange- d2) |
- |
|
|
|
| 6 (Dimensions-Steel flange- d4) |
- |
|
|
|
| 6 (Dimensions-Steel flange- h1) |
- |
|
|
|
| 6 (Dimensions-Steel flange- t1) |
- |
|
|
|
| 6 (Dimensions-Flange Gasket- wd) |
- |
|
|
|
| 6 (Dimensions-Flange Gasket-wt) |
- |
|
|
|
| 6 (Dimensions-Steel Bung- d1) |
- |
|
|
|
| 6 (Dimensions-Steel Bung- p1) |
- |
|
|
|
| 6 (Dimensions-Steel Bung- p3) |
- |
|
|
|
| 6 (Dimensions-Bung Gasket- wt) |
- |
|
|
|
| 6 (Dimensions-Capseals- d1) |
- |
|
|
|
| 6 (Dimensions-Capseals- d2) |
- |
|
|
|
| 6 (Dimensions-Capseals- w1) |
- |
|
|
|
| 6 (Dimensions-Capseals- h2) |
- |
|
|
|
| 6 (Dimensions-Tag Ring- d1) |
- |
|
|
|
| 6 (Dimensions-Tag Ring- d2) |
- |
|
|
|
| 6 (Dimensions-Zinc Bung- d1) |
- |
|
|
|
| 6 (Dimensions-Zinc Bung- d3) |
- |
|
|
|
| 8.4 (Curling Test for Flanges) |
- |
|
|
|
| 6 (Dimensions-Zinc Bung- d1) |
- |
|
|
|
| 6 (Dimensions-Zinc Bung- d3) |
- |
|
|
|
| 8.4 (Curling Test for Flanges) |
- |
|
|
|
| 6 (Dimensions-Zinc Bung- d1) |
- |
|
|
|
| 6 (Dimensions-Zinc Bung- d3) |
- |
|
|
|
| 8.4 (Curling Test for Flanges) |
- |
|
|
|
| 6 (Dimensions-Zinc Bung- d1) |
- |
|
|
|
| 6 (Dimensions-Zinc Bung- d3) |
- |
|
|
|
| 8.4 (Curling Test for Flanges) |
- |
|
|
|
|
- |
-
- |
| 14734 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 1783 : Part 2 (2014) |
Drums large, fixed ends - Specification: Part 2 grade B drums (Fourth Revision) |
- |
5550 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4 (Capacity) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 2)) |
- |
|
|
|
| 6 (Material) |
- |
|
|
|
| 7.5 (Construction) |
- |
|
|
|
| 9.1 (Leakage at air pressure ) |
- |
|
|
|
| 9.2 (Drop Test) |
- |
|
|
|
| 9.3 (Hydraulic Pressure Test) |
- |
|
|
|
|
- |
-
- |
| 14735 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 1783 : Part 1 (2014) |
Drums large, fixed ends - Specification: Part 1 grade A drums (Fourth Revision) |
- |
Rs.4800/- and testing charges as per relevant referred View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6 (Material) |
- |
|
|
|
| 4 (Capacity) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 2)) |
- |
|
|
|
| 6 (Material) |
- |
|
|
|
| 9.1 (Leakage at air pressure ) |
- |
|
|
|
| 9.2 (Drop Test) |
- |
|
|
|
| 9.3 (Hydraulic Pressure Test) |
- |
|
|
|
|
- |
-
- |
| 14736 |
BIS, Central Laboratory (CL)
| None
| IS 2141 (2000) |
Hot dip galvanized stay strand - Specification (Fourth Revision) |
- |
Rs7935/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4 (S) |
- |
|
|
|
| 4 (P) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Mass of Zinc coating- as per IS 6745 for 0.2 to 0.32 mm dia For Hard Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Uniformity of zinc coating- As per IS 2633 for Dia 0.20 to 0.32 mm For Hard Core) |
- |
|
|
|
| 11 (a) Size) |
- |
|
|
|
| 11 (b) Construction) |
- |
|
|
|
| 11 (c) tensile designation) |
- |
|
|
|
| 11 (d) lay) |
- |
|
|
|
| 11 (e) coating) |
- |
|
|
|
| 11 (f) length) |
- |
|
|
|
| 11 ( g) mass) |
- |
|
|
|
| 11 (i) lot number along with the order number) |
- |
|
|
|
| 9 (a) Tensile) |
- |
|
|
|
| 9 (b) Elongation) |
- |
|
|
|
| 9 (c) Galvanizing Test) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Mass of Zinc coating- as per IS 6745 for 0.2 to 0.32 mm dia For Hard Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Uniformity of zinc coating- As per IS 2633 for Dia 0.20 to 0.32 mm For Hard Core) |
- |
|
|
|
| 11 (a) Size) |
- |
|
|
|
| 11 (b) Construction) |
- |
|
|
|
| 11 (c) tensile designation) |
- |
|
|
|
| 11 (d) lay) |
- |
|
|
|
| 11 (e) coating) |
- |
|
|
|
| 11 (f) length) |
- |
|
|
|
| 11 ( g) mass) |
- |
|
|
|
| 7 (Freedom from defects) |
- |
|
|
|
| 9 (a) Tensile) |
- |
|
|
|
| 9 (b) Elongation) |
- |
|
|
|
| 9 (c) Galvanizing Test) |
- |
|
|
|
|
- |
-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;
Excluding Except coating test; Test on completed strand (Cl 9) |
| 14737 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 1759 (1986) |
Specification for powrahs (Second Revision) |
- |
Rs.2100 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 2.1 (Dimensions of Powrah-A) |
- |
|
|
|
| 2.3 (Blade thickness) |
- |
|
|
|
| 5.2 (Hardness) |
- |
|
|
|
| 4 (Mass) |
- |
|
|
|
| 10.1 (Drop test) |
- |
|
|
|
|
- |
-
- |
| 14738 |
BIS, Central Laboratory (CL)
| None
| IS 2090 (1983) |
Specification for high tensile steel bars used in prestressed concrete (First Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1.1 (Sulphur- Relevant parts of IS 228 ) |
- |
|
|
|
| 3.1.1 (Phosphorus- Relevant parts of IS 228 ) |
- |
|
|
|
|
- |
-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm; |
| 14739 |
BIS, Central Laboratory (CL)
| None
| IS 3224 (2002) |
Valve fittings for compressed gas cylinders excluding liquefied petroleum gas (LPG) cylinders - Specification (Third Revision) |
- |
Rs 11790.00 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.2.1 (Types of Valve: Type A
) |
- |
|
|
|
| 4.2.1 (Types of Valve:TypeB) |
- |
|
|
|
| 4.2.1 (Types of Valve:Type C) |
- |
|
|
|
| 4.1 (Classification of valve:direct acting valves ) |
- |
|
|
|
| 4.1 (Classification of valve:indirect acting valves) |
- |
|
|
|
| 5.1 (MATERIAL) |
- |
|
|
|
| 5.3.1 (Tensile Strength- IS 1608) |
- |
|
|
|
| 5.3.2 (Izod impact strength-IS 1598 for brass,manganesebronzeor aluminium
bronze, aluminium silicon bronze) |
- |
|
|
|
| 5.3.2 (Izod impact strength-IS 1598 for for steel) |
- |
|
|
|
| 5.5 (Protective Finishes) |
- |
|
|
|
| 6.1.12-Table 1 ( Design Criteria : Diameter of main gas passages in Valve stem a) |
- |
|
|
|
| 7.1.7.1 (Design of Pressure Relief Devices) |
- |
|
|
|
| 7.2.2 (Relief Pressure) |
- |
|
|
|
| 7.4.1 (Hydrostatic Strength Test) |
- |
|
|
|
| 7.5.1 (Leakage Test at Low and High Temperature) |
- |
|
|
|
| 7.6.1 -Table 2 of amdt2 (Cyclic Test) |
- |
|
|
|
| 7.7.1 (Accelerated Life Testing) |
- |
|
|
|
| 7.8.1 (Activation Test) |
- |
|
|
|
| 7.9.1 (Thermal Cyclic Test) |
- |
|
|
|
| 7.10.1 - 7.10.2 (Condensate Corrosion Resistance Test) |
- |
|
|
|
| 7.11.2 (Vibration Test) |
- |
|
|
|
| 8.1.1.1 (Type of Threads) |
- |
|
|
|
| 9.1 - Table 7,8 (VALVE OUTLET CONNECTIONS AND SPINDLES) |
- |
|
|
|
| 9.3 -Tables 7 and 8 (VALVE OUTLET CONNECTIONS AND SPINDLES) |
- |
|
|
|
| 10.1.1.1 (Hydrostatic test) |
- |
|
|
|
| 10.1.1.2 (Pneumatic test) |
- |
|
|
|
| 10.1.1.3 (Valve Impact test) |
- |
|
|
|
| 10.1.1.4 (Valving torque test) |
- |
|
|
|
| 10.1.1.5 (Cycle test) |
- |
|
|
|
| 10.1.1.5 (Cycle test) |
- |
|
|
|
| 10.1.1.6 (Stress corrosion test for copper alloy valve bodies) |
- |
|
|
|
| 10.1.1.6 (Stress corrosion test for copper alloy valve bodies) |
- |
|
|
|
|
- |
-
Sample dia > 3mm or thickness > 0.8 mm can only be tested;
Excluding test facility not available for Valve spindle as per 5.2.1.2; Cl 10.1.1.2 - Pneumatic tests,(Cl 10.1.1.4)-Valving torque test,Cl 10.1.1.5)-Cycle test, |
| 14740 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 1011 (2002) |
Biscuits - Specification (Fourth Revision) |
- |
3280 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.3 Table 2 i (Moisture) |
- |
|
|
|
| 6.3 Table 2 ii (Acid insoluble ash (on dry basis)) |
- |
|
|
|
| 6.3 Table 2 iii (Acidity of extracted fat (as oleic acid)) |
- |
|
|
|
|
- |
-
- |
| 14741 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 15911 (2010) |
Structural steel (Ordinary Quality) - Specification |
E 165 ,E 170 , E 215 |
Rs 6750/- For elements other than Table-1: Rs 1004/- pe View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Table-1, 5.1, 8.1 & 8.2 (Carbon: Relevant parts of IS 228 or any other established instrumental/chemical method) |
- |
|
|
|
| Table-1, 5.1, 8.1 & 8.2 (Sulphur: Relevant parts of IS 228 or any other established instrumental/chemical method) |
- |
|
|
|
| Table-1, 5.1, 8.1 & 8.2 (Phosphorous: Relevant parts of IS 228 or any other established instrumental/chemical method) |
- |
|
|
|
| Table-1, 5.1, 8.1 & 8.2 (Manganese: Relevant parts of IS 228 or any other established instrumental/chemical method) |
- |
|
|
|
| Table-1, 5.1, 8.1 & 8.2 (Silicon: Relevant parts of IS 228 or any other established instrumental/chemical method) |
- |
|
|
|
| Table-1, 5.1, 8.1 & 8.2 (Phosphorous: Relevant parts of IS 228 or any other established instrumental/chemical method) |
- |
|
|
|
| Table-1, 5.1, 8.1 & 8.2 (Manganese: Relevant parts of IS 228 or any other established instrumental/chemical method) |
- |
|
|
|
| Table-1, 5.1, 8.1 & 8.2 (Nitrogen: Relevant parts of IS 228 or any other established instrumental/chemical method) |
- |
|
|
|
| 7 (Freedom from defects) |
- |
|
|
|
| 5 and 10.3.1 (Tensile strength. IS 1608) |
- |
|
|
|
| 5 and 10.3.1 (Yield Stress. IS 1608) |
- |
|
|
|
| 5 and 10.3.1 (Percentage Elongation. . IS 1608) |
- |
|
|
|
| 11.3 ( Bend Test. IS 1599) |
- |
|
|
|
| Cl 12 of IS 15911 and Table 2.1 of IS 808 (Mass. IS 808) |
- |
|
|
|
| Cl 12 of IS 15911 and Table 2.1 of IS 808 (D) |
- |
|
|
|
| Cl 12 of IS 15911 and Table 2.1 of IS 808 (B) |
- |
|
|
|
| Cl 12 of IS 15911 and Table 2.1 of IS 808 (t) |
- |
|
|
|
| Cl 12 of IS 15911 and Table 2.1 of IS 808 (T) |
- |
|
|
|
| Cl 12 of IS 15911 and Table 2.1 of IS 808 (R1) |
- |
|
|
|
| Cl 12 of IS 15911 and Table 2.1 of IS 808 (R2) |
- |
|
|
|
| Cl 12 of IS 15911 and Table 2.1 of IS 808 (Flange Slop, Max α , ) |
- |
|
|
|
|
- |
-
Except Microalloys , Al,Cu |
| 14742 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 8783 : Part 4 : Sec 3 (1995) |
Winding wires for submersible motors - Specification: Part 4 specification for individual wires: Sec 3 polyester and polypropylene insulated winding wires (First Revision) |
- |
Rs.8700/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1 (The winding wire shall either be wound on spools / reels conforming to IS 482-1981. or supplied in a coils packed and labelled.) |
- |
|
|
|
| 6.1 (The winding wire shall carry following information marked on the lable on spool / reel / coil;) |
- |
|
|
|
| 6.1 (a) Reference to this Indian Standard;) |
- |
|
|
|
| 6.1 (c) Size of conductor / maximum overall diameter,) |
- |
|
|
|
| 6.1 (d) Length of conductor on spool / reel /coil;) |
- |
|
|
|
| 6.1 (e) Number of lengths onspool / reel / coil (if more than one);) |
- |
|
|
|
| 6.1 (f) Country of Manufacturer) |
- |
|
|
|
| 6.1 (g) Year of Manufacture.) |
- |
|
|
|
| 6.2 (BIS Certification Mark) |
- |
|
|
|
| 4 (i) Material) |
- |
|
|
|
| 5 (ii) Diameter [mm] Seperate wire:) |
- |
|
|
|
| 5 (ii) Diameter [mm] Wire taken from cable:) |
- |
|
|
|
| 5 (iii) Annealing test [Percentage] on Seperate wire:) |
- |
|
|
|
| 5 (iii) Annealing test [Percentage] on Wire taken from cable:) |
- |
|
|
|
| 5 (d) Resistance test [Ohm/km corrected to 20°c) |
- |
|
|
|
| 4.1, table 1 & 2 (a) Thickness of Polyster (mm)) |
- |
|
|
|
| 4.1, table 1 & 3 (b) Thickness of Polypropylene (mm)) |
- |
|
|
|
| 4.1, table 1 & 4 (c) Total thickness of Insulation(mm)) |
- |
|
|
|
| 4.2 (Application of insulation) |
- |
|
|
|
| 4.3 (Colour of Insuation) |
- |
|
|
|
| 4.4 (Overall diameter (mm)) |
- |
|
|
|
| 4 (Before ageing Tensile strength [N/mm²]) |
- |
|
|
|
| 4 (Before ageing Elongation at break [Percentage]) |
- |
|
|
|
| 4 (After ageing Tensile strength [N/mm²]) |
- |
|
|
|
| 4 (Variation on tensile strangth [Percentage]) |
- |
|
|
|
| 4 (After ageing Elongation at break [Percentage]) |
- |
|
|
|
| 4 (Variation on elongation at break [Percentage]) |
- |
|
|
|
| 4 (Shrinkage test [Percentage]) |
- |
|
|
|
| 4 (After Shrinkage Cracks found.) |
- |
|
|
|
| 4.1 (Water absorption test [Gravimetric] [mg/cm²]) |
- |
|
|
|
| 4.1 (Hot Deformation test [depth of indentation) [Percentage]) |
- |
|
|
|
| 4.1 (Heat Shock Test - No cracks found) |
- |
|
|
|
| 4.1 (Insulation Resistance test [ohm-cm] At 27 ºC) |
- |
|
|
|
| 4.1 ([Insulation Resistance test [ohm-cm] At 90 ºC) |
- |
|
|
|
| 4.5 (High Voltage test [Water Immersion test] 3 KV for 1 Minute) |
- |
|
|
|
| 5 (The winding wire shall either be wound on spools / reels conforming to IS 482-1981. or supplied in a coils packed and labelled.) |
- |
|
|
|
| 6 (The winding wire shall carry following information marked on the lable on spool / reel / coil;) |
- |
|
|
|
| 6 (a) Reference to this Indian Standard;) |
- |
|
|
|
| 6 (c) Size of conductor / maximum overall diameter,) |
- |
|
|
|
| 6 (d) Length of conductor on spool / reel /coil;) |
- |
|
|
|
| 6 (e) Number of lengths onspool / reel / coil (if more than one);) |
- |
|
|
|
| 6 (f) Country of Manufacturer Marking) |
- |
|
|
|
| 6 (g) Year of Manufacture.) |
- |
|
|
|
| 6.2 (BIS Certification Mark) |
- |
|
|
|
| 4 (i) Material) |
- |
|
|
|
| 4 (ii) Diameter [mm] Seperate wire:) |
- |
|
|
|
| 4 (ii) Diameter [mm] Wire taken from cable) |
- |
|
|
|
| 4 (iii) Annealing test [Percentage] on Seperate wire:) |
- |
|
|
|
| 4 ([iii) Annealing test [Percentage] on Wire taken from cable:) |
- |
|
|
|
| 4 (d) Resistance test [Ohm/km corrected to 20°c]) |
- |
|
|
|
| 4 (a) Thickness of Polyster (mm)) |
- |
|
|
|
| 4 (b) Thickness of Polypropylene (mm)) |
- |
|
|
|
| 4 (c) Total thickness of Insulation(mm)) |
- |
|
|
|
| 4.2 (Application of insulation) |
- |
|
|
|
| 4 (Colour of Insuation) |
- |
|
|
|
| 4 (Overall diameter (mm)) |
- |
|
|
|
| 4 (Before ageing Tensile strength [N/mm²]) |
- |
|
|
|
| 4 (Before ageing Elongation at break [Percentage]) |
- |
|
|
|
| 4 (After ageing Tensile strength [N/mm²]) |
- |
|
|
|
| 4 (Variation on tensile strangth [Percentage]) |
- |
|
|
|
| 4 (After ageing Elongation at break [Percentage]) |
- |
|
|
|
| 4 (Variation on elongation at break [Percentage]) |
- |
|
|
|
| 4 (Shrinkage test [Percentage]) |
- |
|
|
|
| 4 (After Shrinkage Cracks found.) |
- |
|
|
|
| 4 (Water absorption test [Gravimetric] [mg/cm²]) |
- |
|
|
|
| 4 (Hot Deformation test [depth of indentation) [Percentage]) |
- |
|
|
|
| 4 (Heat Shock Test - No cracks found Physical) |
- |
|
|
|
| 4 (High Voltage test [Water Immersion test] 3 KV for 1 Minute) |
- |
|
|
|
| 4 (Insulation Resistance test [ohm-cm] At 27 ºC) |
- |
|
|
|
| 4 (Insulation Resistance test [ohm-cm] At 90 ºC) |
- |
|
|
|
|
- |
-
Test facility is complete |
| 14743 |
BIS, Central Laboratory (CL)
| None
| IS 1855 (2003) |
Stranded steel wire ropes for winding and man - Riding haulages in mines - Specification (Second Revision) |
- |
Rs. 11100/- & Testing charges as per relevant referred View breakup
Rs. 11100/- & Testing charges as per relevant referred Iss
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.1 (as per IS 1835) (Carbon- Is228) |
- |
|
|
|
| 6.1 (as per IS 1835) (Manganese - IS 228) |
- |
|
|
|
| 6.1 (as per IS 1835) (Silicon - IS 228) |
- |
|
|
|
| 6.1 (as per IS 1835) (P + S - IS 228) |
- |
|
|
|
| 6.3.1 (Joints - IS 1855) |
- |
|
|
|
| 6.4.1 (Direction of Lay- IS 1855) |
- |
|
|
|
| 6.4.2 (Length of Lay- IS 1855) |
- |
|
|
|
| 6.5.1-Table 1 to Table 7 (Mass of Rope with Fiber core - IS 1855) |
- |
|
|
|
| 6.5.1-Table 1 to Table 8 (Mass of Rope with Steel core - IS 1856) |
- |
|
|
|
| 8.1 (LUBRICATION-IS1855) |
- |
|
|
|
| 9 (FREEDOM FROM DEFECTS-IS 1855) |
- |
|
|
|
| 6.1 (as per IS 1835) (Sulphur - IS 228) |
- |
|
|
|
| 6.1 (as per IS 1835) (Phosphorus - IS228) |
- |
|
|
|
| 6.1 (as per IS 1835) (Copper-IS228) |
- |
|
|
|
| 6.1 (as per IS 1835) (Nickel - IS 228) |
- |
|
|
|
| 6.1 (as per IS 1835) (Chromium - IS 228) |
- |
|
|
|
|
- |
-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;
Excluding complete for dia >3 mm, partial dia < 3mm; Min Breaking Force (Cl 5) (For dia Up to 18 and above 22 mm) |
| 14744 |
BIS, Central Laboratory (CL)
| None
| IS 2568 (1978) |
Specification for malathion dusting powders |
- |
3300 View breakup
Rs. 3300/-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 2.1 (Description) |
- |
|
|
|
| 2.2. Table1.i (Malathion content) |
- |
|
|
|
| 2.2. Table1.ii (High temperature stability after storage for 20 hours at 90°C) |
- |
|
|
|
| 2.2. Table1.iii (Material passing through 75-micron IS Sieve) |
- |
|
|
|
| 2.2. Table1.iv (Bulk'density after compacting) |
- |
|
|
|
| 2.2. Table1.v (Acidity/Alkalinity) |
- |
|
|
|
|
- |
-
- |
| 14745 |
BIS, Central Laboratory (CL)
| None
| IS 447 (1988) |
Specification for rubber hose for welding (Fourth Revision) |
- |
Rs. 3300/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl. 3.2 - Table 1 (Bore size) |
- |
|
|
|
| Cl. 3.2 - Table 1 (Lining Thickness) |
- |
|
|
|
| Cl. 3.2 - Table 1 (Cover Thickness) |
- |
|
|
|
| Cl. 3.2 - Table 1 (Length %) |
- |
|
|
|
| Cl. 3.3 - Table 2 (Tensile strength - Lining MPA) |
- |
|
|
|
| Cl. 3.3 - Table 2 (Tensile strength - Cover Mpa) |
- |
|
|
|
| Cl. 3.3 - Table 2 (Elongation at break - Lining %) |
- |
|
|
|
| Cl. 3.3 - Table 2 (Elongation at break - Cover %) |
- |
|
|
|
| Cl. 3.3 - Table 2 (After Ageing Elongation at break - Lining %) |
- |
|
|
|
| Cl. 3.4 - Table3 (Pressure Tests) |
- |
|
|
|
| Cl. 3.4 - Table3 (Adhesion KN/m Min) |
- |
|
|
|
|
- |
-
- |
| 14746 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 299 (2012) |
Alumino - Ferric - Specification (Fifth Revision) |
- |
Please see remarks View breakup
testing charges are Rs.3250.00 (for Grade 1, 2 & 3) and Rs.8250.00 (for Grade 4 & 5).
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 1 (i) Table 1 ( Insouble matter, Grade 1, A-3) |
- |
|
|
|
| 1 (ii) Table 1 (Soluble iron compound (as Fe2+ and Fe3+), Grade 1, A-4) |
- |
|
|
|
| 1 (iii) Table 1 (Water soluble aluminium compounds (as Al2O3), Grade 1, A-5) |
- |
|
|
|
| 1 (iv) Table 1 (pH (of 5 percent aqueous solution), Grade 1, A-6) |
- |
|
|
|
| 1 (v) Table 1 (Free acidity (as H2SO4)/Basicity (as Al2O3), Grade 1, A-7) |
- |
|
|
|
|
- |
-
Test facility not available for the following:
1. Cd, Se, Hg |
| 14747 |
BIS, Central Laboratory (CL)
| None
| IS 1812 (1982) |
Specification for carbon steel wire for the manufacture of wood screws (Second Revision) |
- |
825 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl. 5.1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 5.1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 5.1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 5.1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 5.1 (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
|
- |
-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm; |
| 14748 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 13592 (2013) |
Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Soil and Waste Discharge System Inside and Outside Buiildings Including Ventilation and Rainwater System |
- |
9000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl. 9, IS 12235 Part 7 (Resistance to Sulphuric Acid) |
- |
|
|
|
| Cl.7.1 (Mean out side Diameter (For less than or equal to 40 mm- Average of 8 , For higher diameters up to 110 mm average of 6)) |
- |
|
|
|
| Cl.7.1 (Outside Diameter at any point (Take 8 reading reported minimum, maximum)) |
- |
|
|
|
| Cl.7.1 (Wall thickness "minimum,maximum" (Take 8 reading)) |
- |
|
|
|
| Cl.7.3.1 (Minimum wall thickness of socket on pipes shall
be as given in Table 2 read with Fig. 2 and Fig. 3.) |
- |
|
|
|
| Cl.7.3.2 (Dimensions of sockets for solvent cementing and
grooved sockets of pipes shall be as given in Tables 3
and 4 respectively, read with Fig. 2 and 3.) |
- |
|
|
|
| Cl.8.2 (When tested by the method described in IS 12235
(Part 5), a length of pipe sample of 200 ± 20 mm shall
not alter in length by more than 5 percent. In the case
of socket ended pipes, this test shall be carried out on
the plain portion of pipe taken at least 100 mm away
from the root of the socket.) |
- |
|
|
|
| Cl8.3 (This test shall be carried out for socket end pipes only.
When tested by the method described in IS 12235
(Part 6), the test specimens shall not show blisters,
excessive delamination or cracking or signs of weld
line splitting.) |
- |
|
|
|
| Cl.8.4 (When determined in accordance with IS 12235 (Part 2),
the vicat softening temperature of the specimen shall
not be less than 79°C.) |
- |
|
|
|
| Cl.10.1 (When tested by method prescribed in IS 12235 (Part 9),the pipe shall have a true impact rate of not more than
10 percent. Mass of striker and height of fall shall be
as per Annex A.) |
- |
|
|
|
| Cl.10.2 (When determined in accordance with the method
described in IS 12235 (Part 13), the tensile strength at
break shall not be less than 45 MPa.) |
- |
|
|
|
| Cl.10.3 (The axial shrinkage shall not exceed 2 percent when
determined in accordance with Annex B.) |
- |
|
|
|
| Cl.11. (Jointing of solvent
cementing joints is to be carried out using solvent
conforming to IS 14182.
Apply a pressure of 0.05 MPa for a period of 15 min
and there should be no leakage at any joint.) |
- |
|
|
|
| Cl.7.2 (Pipes shall be supplied in nominal lengths of 2, 3, 4 or
6 metres either plain or with socket for solvent
cementing/grooved socket. Tolerances on specified
length shall be + 10 mm and – 0 mm.The nominal length of the pipe with socket for solvent
cementing/grooved socket shall be as given in Fig. 1.) |
- |
|
|
|
| Cl.10.2 (When determined in accordance with the method
described in IS 12235 (Part 13), the tensile strength at
break shall not be less than 45 MPa.) |
- |
|
|
|
| Cl. 12, IS 12235 Part 11 (Resistance to Di-Chloro-Methane) |
- |
|
|
|
|
- |
-
The following test facilities are not available:
(1) For Outside Diameter above 250 mm,
(2) Resistance to di chloromethane
(3) Effect on water (Clause 8.6)
(4) IMPACT TEST |
| 14749 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 3074 (2013) |
Steel tubes for automotive purposes - Specification (Third Revision) |
- |
4200 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6 (STRAIGHTNESS) |
- |
|
|
|
| 8.3,18, (Flattening Test) |
- |
|
|
|
| 8.4 (Crushing Test) |
- |
|
|
|
| 8.5 (Drift Test) |
- |
|
|
|
| 8.2,15,17,22, Table 3,5 &7 (Tensile Tests,IS 1608 Part 1) |
- |
|
|
|
| 7, 20,Table 1,2,4 &6 ( C) |
- |
|
|
|
| 7, Table 1,2,4 &6 (Mn) |
- |
|
|
|
| 7, Table 1,2,4 &6 (S) |
- |
|
|
|
| 7, Table 1,2,4 &6 (P) |
- |
|
|
|
| 7, Table 1,2,4 &6 (Si) |
- |
|
|
|
|
- |
-
Test facilities are not available for the following:
1. Ni, Cr, Mo, Micro alloying elements
2. Drift Expanding Test
3.Internal Hydraulic/Air Pressure Test |
| 14750 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 1660 (2009) |
Wrought aluminium utensils - Specification (First Revision) |
- |
Rs 6760/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.2 ( Body Thickness of the thinnest part of the finished utensil, mm Not declared ) |
- |
|
|
|
| 5.2 (Lid Thickness of the finished utensil, mm) |
- |
|
|
|
| 6.1 & Table 1 (Inside dia, Φ D mm Not declared ) |
- |
|
|
|
| 6.1 & Table 1 (Outside dia Ф NA) |
- |
|
|
|
| 6.1 & Table 1 (Height NA) |
- |
|
|
|
| 6.1 & Table 1 (Capacity, l NA) |
- |
|
|
|
| 6.1 ( Minimum sheet thickness for nominal size ) |
- |
|
|
|
| 7.1 (HANDLES ,When fitted shall be of aluminium, stainless steel or of other suitable fire resistance material These shall be fastened to the utensils by tightly drawn aluminium or stainless steel rivets, by welding, by screwing to cast bosses or by riveting between flange at the end of the handles. Handles shall be so shaped and positioned to facilitate the carrying and handling of the utensils in normal use ) |
- |
|
|
|
| 7.2 (Handles shall be sufficiently strong to support a mass in the utensils equivalent to three times the mass of the water capacity of the utensils in the position of normal use without visible permanent deformation of the handle or utensil) |
- |
|
|
|
| 8.1 (The utensils shall be clean reasonably free from distortion, dents, wrinkles, wavy surface, burrs, scratches, pitting and deep tool marks and other surface defects) |
- |
|
|
|
| 8.2 (The design of the utensils shall be such that it is easy to clean and prevent accumulation of dirt) |
- |
|
|
|
| 8.4.2 (A coating of thickness 25 to 100 microns is generally required) |
- |
|
|
|
| 8.4.3 (Abrasion Resistance When the coating surface is rubbed two or three times with emery paper with emery conforming to grit number 180 using medium finger pressure, it shall not abrade the surface but shall skid over the surface showing not more than a trace of whitening of the surface) |
- |
|
|
|
| 10 (Each vessel shall be legibly and indelibly stamped on the outside surface or handle with the manufacturer’s name or registered trade-mark, size and thickness or class. ) |
- |
|
|
|
| 9 (The manufacturer shall provide full instructions for use and cleaning for coated or hard anodized utensils) |
- |
|
|
|
| 8.4.1.2 ( Finish of the coating: The coating shall be smooth continuous and uniform in appearance, and shall be adherent. It shall be free from powdery areas, loose films and discontinuities, such as breaks and scratches. The size and number of contact marks shall be minimum consistent with good practice.) |
- |
|
|
|
| 8.4.4 (The colour of the hard anodic coating varies depending upon the alloy, thickness of the coating and electrolye. Normally the colour may vary from dark grey (almost black) to light grey. ) |
- |
|
|
|
|
- |
-
Complete test facility |
| 14751 |
BIS, Central Laboratory (CL)
| None
| IS 1673 (1984) |
Spectfication for mild steel wire, cold heading quality (Second Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl. 5.1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 5.1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 5.1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 5.1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 5.1 (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
|
- |
-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm; |
| 14752 |
BIS, Central Laboratory (CL)
| None
| IS 14246 (2013) |
Continuously pre-painted galvanized steel sheets and coils (First Revision) |
- |
4700 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 4.2 (Workmanship) |
- |
|
|
|
| Cl 6.2 (Press) |
- |
|
|
|
| Cl 6.3 (HWB) |
- |
|
|
|
| Cl 6.4 (Load Resistance) |
- |
|
|
|
| Cl 6.5 (Cross Hatch) |
- |
|
|
|
| Cl 9 (Length, Width, Thickness & Mass) |
- |
|
|
|
| Cl 10 (Camber, Deviation From Squareness (Out-of- Square) & Deviation From Flatness) |
- |
|
|
|
| 4,4.1,4.2 (CARBON) |
- |
|
|
|
| 4,4.1,4.2 (SULPHUR) |
- |
|
|
|
| 4,4.1,4.2 (PHOSPHURS) |
- |
|
|
|
| 4,4.1,4.2 (MANGANESE) |
- |
|
|
|
| 4,4.1,4.2 (SILICON) |
- |
|
|
|
| 4,4.1,4.2 (ALUMINIUM) |
- |
|
|
|
| 4,4.1,4.2 (NITROGEN) |
- |
|
|
|
|
- |
-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;
Excluding Except coating test and minimum Thickness shall be >0.8 mm; Metallic Coating (Cl 4.2), Salt Spray Test (Cl 8) |
| 14753 |
BIS, Central Laboratory (CL)
| None
| IS 5143 (1988) |
Specification for adjustable axillary crutches (Second Revision) |
- |
Rs 2400.00 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3 (Shape & Dimension) |
- |
|
|
|
| 4.1 (Workmanship & Finish) |
- |
|
|
|
| 4.1 (Workmanship & Finish) |
- |
|
|
|
| 4.2 (Workmanship & Finish) |
- |
|
|
|
| 5.1.1 (Strength Test- Cl. 5.1.1 to 5.1.3) |
- |
|
|
|
| 5.1.2 (Strength Test- Cl. 5.1.1 to 5.1.3) |
- |
|
|
|
| 5.1.3 (Strength Test- Cl. 5.1.1 to 5.1.3) |
- |
|
|
|
| 5.2 (Drop Test- As per Cl. 5.2) |
- |
|
|
|
|
- |
-
- |
| 14754 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 1812 (1982) |
Specification for carbon steel wire for the manufacture of wood screws (Second Revision) |
For all grades |
825 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl. 5.1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 5.1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 5.1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 5.1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 5.1 (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| 6.1 ( Tensile Test IS1608(P-1)) |
- |
|
|
|
| 6.2 ( Bend Test ) |
- |
|
|
|
| 6.3 ( Wrapping Test ) |
- |
|
|
|
| 7 (. SIZE TOLERANCE) |
- |
|
|
|
| 8 ( FREEDOM FROM DEFECTS) |
- |
|
|
|
|
- |
-
Chem- Type of killed material to be declared, |
| 14755 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 1161 (2014) |
Steel tubes for structural purposes - Specification (Fifth Revision) |
- |
5725 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 6 (Outer Diameter, Thickness & Mass) |
- |
|
|
|
| Cl 11 (Tensile Test, Flattening Test & Cold Bend Test) |
- |
|
|
|
| Cl 11 (Tensile Test, Flattening Test & Cold Bend Test) |
- |
|
|
|
| 5 AND AS PER IS 10748 (CARBON) |
- |
|
|
|
| Clause - 5.1, Table-3 (SILICON) |
- |
|
|
|
| Clause - 5.1, Table-3 (MANGANESE) |
- |
|
|
|
| Clause - 5.1, Table-3 (SULPHUR) |
- |
|
|
|
| Clause - 5.1, Table-3 (PHOSPHURS) |
- |
|
|
|
|
- |
-
Test facilities are not available for the following:
1. Micro-alloying elements like Nb. V or Ti, Nitrogen, Al,Cu
2. Cold Bend test |
| 14756 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 1079 (2017) |
Hot rolled carbon steel sheet, plate and strip - Specification (Seventh Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 8 (UTM) |
- |
|
|
|
| Cl 13 (Length, Width & Thickness) |
- |
|
|
|
| Cl 13 (Length, Width & Thickness) |
- |
|
|
|
| Cl 13 (Length, Width & Thickness) |
- |
|
|
|
| 6.1 (Carbon %) |
- |
|
|
|
| 6.1 (Manganese %) |
- |
|
|
|
| 6.1 (Phosphorus %) |
- |
|
|
|
| 6.1 (Sulphur %) |
- |
|
|
|
| 6.1 (Silicon %) |
- |
|
|
|
|
- |
-
Test facilities are not available for the following:
1. Boron, Titanium, Niobium, Vanadium, Nitrogen, Al, Cu
2. Cupping test |
| 14757 |
BIS, Central Laboratory (CL)
| None
| IS 1253 (1992) |
Aluminium for use in iron and steel manufacture - Specification (Third Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6 ,Table 1 (Chemical composition) |
- |
|
|
|
|
- |
-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;
Excluding Except Arsenic table 1 ,grade 2; |
| 14758 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 2141 (2000) |
Hot dip galvanized stay strand - Specification (Fourth Revision) |
- |
Rs7935/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4 (S) |
- |
|
|
|
| 4 (P) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Mass of Zinc coating- as per IS 6745 for 0.2 to 0.32 mm dia For Hard Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Mass of Zinc coating- as per IS 6745 for 0.32 to 0.40 mm dia For Hard Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Mass of Zinc coating- as per IS 6745 for 0.40 to 0.50 mm dia For Hard Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Mass of Zinc coating- as per IS 6745 for 0.50 to 0.56 mm dia For Hard Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Mass of Zinc coating- as per IS 6745 for 0.56 to 0.63 mm dia For Hard Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Mass of Zinc coating- as per IS 6745 for 0.63 to 0.71 mm dia For Hard Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Mass of Zinc coating- as per IS 6745 for 0.71 to 0.80 mm dia For Hard Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Mass of Zinc coating- as per IS 6745 for 0.80 to 0.90 mm dia For Hard Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Mass of Zinc coating- as per IS 6745 for 0.90 to 1.00 mm dia For Hard Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Mass of Zinc coating- as per IS 6745 for 1.00 to 1.25 mm dia For Hard Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Mass of Zinc coating- as per IS 6745 for 1.25 to 1.40 mm dia For Hard Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Mass of Zinc coating- as per IS 6745 for 1.40 to 1.60 mm dia For Hard Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Mass of Zinc coating- as per IS 6745 for 1.60 to 1.80 mm dia For Hard Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Mass of Zinc coating- as per IS 6745 fo1.80 to 2.00 mm dia For Hard Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Mass of Zinc coating- as per IS 6745 for 2.00 to 2.24 mm dia For Hard Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Mass of Zinc coating- as per IS 6745 for 2.24 to 2.50 mm dia For Hard Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Mass of Zinc coating- as per IS 6745 for 2.50 to 2.80 mm dia For Hard Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Mass of Zinc coating- as per IS 6745 for 0.2.80 to 3.15 mm dia For Hard Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Mass of Zinc coating- as per IS 6745 for3.15 to 3.55 mm dia For Hard Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Mass of Zinc coating- as per IS 6745 for 3.55 to 4.00 mm dia For Hard Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Mass of Zinc coating- as per IS 6745 for 4.00 to 5.00 mm dia For Hard Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Mass of Zinc coating- as per IS 6745 for 5.00 to 7.10 mm dia For Hard Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Mass of Zinc coating- as per IS 6745 for 7.10 to 10.00 mm dia For Hard Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Uniformity of zinc coating- As per IS 2633 for Dia 0.20 to 0.32 mm For Soft Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Uniformity of zinc coating- As per IS 2633 for Dia 0.32 to 0.40mm For Soft Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Uniformity of zinc coating- As per IS 2633 for Dia 0.32 to 0.40mm For Hard Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Uniformity of zinc coating- As per IS 2633 for Dia 0.40 to 0.50mm For Hard Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Uniformity of zinc coating- As per IS 2633 for Dia 0.50 to 0.56 mm For Hard Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Uniformity of zinc coating- As per IS 2633 for Dia 0.56 to 0.63 mm For Hard Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Uniformity of zinc coating- As per IS 2633 for Dia 0.63 to 0.71 mm For Hard Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Uniformity of zinc coating- As per IS 2633 for Dia 0.71 to 0.80 mm For Hard Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Uniformity of zinc coating- As per IS 2633 for Dia 0.80 to 0.90 mm) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Uniformity of zinc coating- As per IS 2633 for Dia 0.90 to 1.00 mm For Hard Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Uniformity of zinc coating- As per IS 2633 for Dia 1.00 to 1.25 mm For Hard Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Uniformity of zinc coating- As per IS 2633 for Dia 1.25 to1.40 mm For Hard Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Uniformity of zinc coating- As per IS 2633 for Dia 1.40 to1.60 mm For Hard Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Uniformity of zinc coating- As per IS 2633 for Dia 1.60 to 1.80 mm For Hard Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Uniformity of zinc coating- As per IS 2633 for Dia 1.80 to2.00 mm For Hard Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Uniformity of zinc coating- As per IS 2633 for Dia2.00 to2.24 mm For Hard Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Uniformity of zinc coating- As per IS 2633 for Dia 2.24 to2.50 mm For Hard Core For Hard Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Uniformity of zinc coating- As per IS 2633 for Dia 2.50 to2.80 mm For Hard Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Uniformity of zinc coating- As per IS 2633 for Dia 2.80 to3.15 mm For Hard Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Uniformity of zinc coating- As per IS 2633 for Dia 3.15 to 3.55 mm For Hard Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Uniformity of zinc coating- As per IS 2633 for Dia 3.55 to 4.00 mm For Hard Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Uniformity of zinc coating- As per IS 2633 for Dia4.00 to5.00 mm For Hard Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Uniformity of zinc coating- As per IS 2633 for Dia 5.00 to 7.10 mm For Hard Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Uniformity of zinc coating- As per IS 2633 for Dia 7.10 to10.00 mm For Hard Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Mass of Zinc coating- as per IS 6745 for 0.2 to 0.32 mm dia For Soft Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Mass of Zinc coating- as per IS 6745 for 0.32 to 0.40 mm dia For Soft Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Mass of Zinc coating- as per IS 6745 for 0.40 to 0.50 mm dia For Soft Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Mass of Zinc coating- as per IS 6745 for 0.50 to 0.56 mm dia For Soft Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Mass of Zinc coating- as per IS 6745 for 0.63 to 0.71 mm dia For Soft Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Mass of Zinc coating- as per IS 6745 for 0.71 to 0.80 mm dia For Soft Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Mass of Zinc coating- as per IS 6745 for 0.90 to 1.00 mm dia For Soft Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Mass of Zinc coating- as per IS 6745 for 1.00 to 1.25 mm dia For Soft Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Mass of Zinc coating- as per IS 6745 for 1.40 to 1.60 mm dia For Soft Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Mass of Zinc coating- as per IS 6745 for 1.60 to 1.80 mm dia For Soft Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Mass of Zinc coating- as per IS 6745 fo1.80 to 2.00 mm dia) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Mass of Zinc coating- as per IS 6745 For 2.00 to 2.24 mm dia For Soft Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Mass of Zinc coating- as per IS 6745 for 2.24 to 2.50 mm dia For Soft Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Mass of Zinc coating- as per IS 6745 for 2.50 to 2.80 mm dia For Soft Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Mass of Zinc coating- as per IS 6745 for 2.80 to 3.15 mm dia For Soft Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Mass of Zinc coating- as per IS 6745 for3.15 to 3.55 mm dia For Soft Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Mass of Zinc coating- as per IS 6745 for 3.55 to 4.00 mm dia For Soft Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Mass of Zinc coating- as per IS 6745 for 4.00 to 5.00 mm dia For Soft Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Mass of Zinc coating- as per IS 6745 for 5.00 to 7.10 mm dia For Soft Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Mass of Zinc coating- as per IS 6745 for 7.10 to 10.00 mm dia For Soft Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Uniformity of zinc coating- As per IS 2633 for Dia 0.20 to 0.32 mm For Soft Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Uniformity of zinc coating- As per IS 2633 for Dia 0.32 to 0.40mm For Soft Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Uniformity of zinc coating- As per IS 2633 for Dia 0.40 to 0.50mm For Soft Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Uniformity of zinc coating- As per IS 2633 for Dia 0.50 to 0.56 mm For Soft Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Uniformity of zinc coating- As per IS 2633 for Dia 0.56 to 0.63 mm For Soft Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Uniformity of zinc coating- As per IS 2633 for Dia 0.63 to 0.71 mm For Soft Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Uniformity of zinc coating- As per IS 2633 for Dia 0.71 to 0.80 mm For Soft Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Uniformity of zinc coating- As per IS 2633 for Dia 0.80 to 0.90 mm For Soft Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Uniformity of zinc coating- As per IS 2633 for Dia 0.90 to 1.00 mm For Soft Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Uniformity of zinc coating- As per IS 2633 for Dia 1.00 to 1.25 mm For Soft Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Uniformity of zinc coating- As per IS 2633 for Dia 1.25 to1.40 mm For Soft Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Uniformity of zinc coating- As per IS 2633 for Dia 1.40 to1.60 mm For Soft Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Uniformity of zinc coating- As per IS 2633 for Dia 1.60 to 1.80 mm For Soft Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Uniformity of zinc coating- As per IS 2633 for Dia 1.80 to2.00 mm For Soft Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Uniformity of zinc coating- As per IS 2633 for Dia2.00 to2.24 mm For Soft Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Uniformity of zinc coating- As per IS 2633 for Dia 2.24 to2.50 mm For Soft Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Uniformity of zinc coating- As per IS 2633 for Dia 2.50 to2.80 mm For Soft Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Uniformity of zinc coating- As per IS 2633 for Dia 2.80 to3.15 mm For Soft Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Uniformity of zinc coating- As per IS 2633 for Dia 3.15 to 3.55 mm For Soft Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Uniformity of zinc coating- As per IS 2633 for Dia 3.55 to 4.00 mm For Soft Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Uniformity of zinc coating- As per IS 2633 for Dia4.00 to5.00 mm For Soft Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Uniformity of zinc coating- As per IS 2633 for Dia 5.00 to 7.10 mm For Soft Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Uniformity of zinc coating- As per IS 2633 for Dia 7.10 to10.00 mm For Soft Core) |
- |
|
|
|
| 11 (a) Size) |
- |
|
|
|
| 11 (b) Construction) |
- |
|
|
|
| 11 (c) tensile designation) |
- |
|
|
|
| 11 (d) lay) |
- |
|
|
|
| 11 (e) coating) |
- |
|
|
|
| 11 (f) length) |
- |
|
|
|
| 11 ( g) mass) |
- |
|
|
|
| 11 (h) manufacturer's name or trade mark) |
- |
|
|
|
| 11 (i) lot number along with the order number) |
- |
|
|
|
| 11 (j) BIS Standards Mark) |
- |
|
|
|
| 5 (a) Grade) |
- |
|
|
|
| 5 (b) Tensile Grade) |
- |
|
|
|
| 6 (a) Lay) |
- |
|
|
|
| 6 (b) Construction) |
- |
|
|
|
| 7 (Freedom from defects) |
- |
|
|
|
| 9 (a) Tensile) |
- |
|
|
|
| 9 (b) Elongation) |
- |
|
|
|
| 9 (c) Galvanizing Test) |
- |
|
|
|
|
- |
-
Elongation test |
| 14759 |
BIS, Central Laboratory (CL)
| None
| IS 2567 (1978) |
Specification for malathion emulsifiable concentrates |
- |
Rs.3500.00 (Including cost of CRM) View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 2.2.1 (Description) |
- |
|
|
|
| 2.2.2 (Cold Test) |
- |
|
|
|
| 2.2.3 (Flash Point (Abel)) |
- |
|
|
|
| 2.2.4 (Emulsion Stability) |
- |
|
|
|
| 2.3.1 (Malathion content) |
- |
|
|
|
| 2.3.2 (Acidity (as H2SO4), ) |
- |
|
|
|
|
- |
-
- |
| 14760 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 432 : Part 2 (1982) |
Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 2 Hard-Drawn Steel Wire |
- |
Rs 3900/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Clause 3.1.1 (Sulphur) |
- |
|
|
|
| Clause 3.1.1 (Phosphorus) |
- |
|
|
|
| Cl 5 & 6 (Diameter) |
- |
|
|
|
| Cl 7 (UTM) |
- |
|
|
|
| Cl 8.3 (Bending To Both Side At 90°, Then Straight) |
- |
|
|
|
|
- |
-
Test facilities are not available for the following:
1. Nitrogen |
