BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15363 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

14761

BIS, Northern Regional Laboratory (NRL)

None

IS 14255 (1995)

Aertal bunched cables - For working voltages up to and including 1100 Volts - Specification

Please see remarks View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Phase/Street Lighting conductor)	-
5.1 (Insulation)	-
6.1 (Flexibility class)	-
6.2 (Compactness)	-
6.2 (No of strands)	-
6.2 (Surface)	-
6.3 (Protective barrier)	-
6.4 (size of street lighting conductor)	-
6.5 (Size of messenger conductor )	-
6.6 (Joints in messenger conductor )	-
6.6 (Direction of outer layer)	-
7.1 (Insulation)	-
7.2 ( Thickness of insulation)	-
7.3 (Tolerance on thickness of insulation )	-
7.4 (Aplication of the insulation )	-
7.5 (Colour of the insulation )	-
8.1 (Core identification)	-
8.2 (Core identification)	-
8.3 (Identification by other means)	-
9.1 (Assembly (Laying up))	-
9.2 (Assembly (Laying up))	-
9.3 (Direction of lay)	-
10.1 a) i) (Tests on phase/street light conductor: tensile test - Test method IS10810:Part 2)	-
10.1 a) ii) (Wrapping test - 10810: Part 3)	-
10.1 a) iii) (Resistance test - IS10810: Part 5)	-
10.1 b) i) (Test on messenger conductor: Breaking load - IS 10810: Part 2)	-
10.1 b) ii) (Test on messenger conductor: Elongation test - Cl 11.3)	-
10.1 b) iii) (Test on messenger conductor: Resistance test - IS 10810: Part 5)	-
10.1 c) i) (Physical tests for XLPE Insulation: Tensile strength - IS 10810: Part 7)	-
10.1 c) i) (Physical tests for XLPE Insulation: elongation at break - IS 10810: part 7)	-
10.1 c) ii) (Ageing in air oven : Tensile strength variation - IS 10810:Part 11)	-
10.1 c) ii) (Ageing in air oven : Elongation variation- IS 10810: Part 11)	-
10.1 c) iii) (Hot set test: Elongation under load - IS 10810: Part 30)	-
10.1 c) iii) (Hot set test: Permanent elongation (set) after cooling - IS 10810: Part 30)	-
10.1 c) iv) (Shrinkage test : Shrinkage - 10810:Part 12)	-
10.1 c) iv) (Shrinkage test : Crack Observed - 10810:Part 12)	-
10.1 c) v) (Water ahsorption (Gravimetric) - IS 10810: Part 33 )	-
10.1 f) (Insulation resistance (Volume resistivity) test a) volume resistivity at 27°C - IS 10810: Part 43)	-
10.1 f) (Insulation resistance (Volume resistivity) test b) volume resistivity at 70°C - IS 10810: Part 43)	-
10.1 g) (High voltage test - IS10810:Part 45)	-
11.4 (Bending Test on the Completed Cable ( Optional) )	-

-
Test facility is complete

14762

BIS, Northern Regional Laboratory (NRL)

None

IS 2692 (1989)

Ferrules for water services ? specification

3450 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 Table 2 (Dimensions Dimension of body & cap )	-
6.1 Table 2 (Dimensions Dimension of body & cap )	-
6.1 Table 2 (Dimensions Dimension of body & cap )	-
6.1 Table 2 (Dimensions Dimension of body & cap )	-
6.1 Table 2 (Dimensions Dimension of body & cap )	-
6.1 Table 2 (Dimensions Dimension of body & cap )	-
6.1 Table 2 (Dimensions Dimension of body & cap )	-
6.1 Table 2 (Dimensions Dimension of body & cap )	-
6.1 Table 2 (Dimensions Dimension of body & cap )	-
6.1 Table 2 (Dimensions Dimension of body & cap )	-
6.1 Table 2 (Dimensions Dimension of body & cap )	-
6.1 Table 2 (Dimensions Dimension of body & cap )	-
6.1 Table 2 (Dimensions Dimension of body & cap )	-
6.1 Table 2 (Dimensions Dimension of body & cap )	-
6.1 Table 2 (Dimensions Dimension of body & cap )	-
6.1 Table 3 (Dimensions of Plug, Washer Plate and Washer)	-
6.1 Table 3 (Dimensions of Plug, Washer Plate and Washer)	-
6.1 Table 3 (Dimensions of Plug, Washer Plate and Washer)	-
6.1 Table 3 (Dimensions of Plug, Washer Plate and Washer)	-
7.1 (MANUFACTURE AND WORKMANSHIP)	-
7.2 (MANUFACTURE AND WORKMANSHIP)	-
11 (Marking)	-
11 (Marking)	-
6.1 Table 3 (Dimensions of Plug, Washer Plate and Washer)	-
6.1 Table 3 (Dimensions of Plug, Washer Plate and Washer)	-
6.1 Table 3 (Dimensions of Plug, Washer Plate and Washer)	-
6.1 Table 3 (Dimensions of Plug, Washer Plate and Washer)	-
6.1 Table 3 (Dimensions of Plug, Washer Plate and Washer)	-
6.1 Table 3 (Dimensions of Plug, Washer Plate and Washer)	-
6.1 Table 3 (Dimensions of Plug, Washer Plate and Washer)	-
6.1 Table 3 (Dimensions of Plug, Washer Plate and Washer)	-
6.1 Table 3 (Dimensions of Plug, Washer Plate and Washer)	-
6.1 Table 3 (Dimensions of Plug, Washer Plate and Washer)	-
6.1 Table 3 (Dimensions of Plug, Washer Plate and Washer)	-
6.1 Table 3 (Dimensions of Plug, Washer Plate and Washer)	-
6.1 Table 3 (Dimensions of Plug, Washer Plate and Washer)	-
6.1 Table 3 (Dimensions of Plug, Washer Plate and Washer)	-
6.1 Table 3 (Dimensions of Plug, Washer Plate and Washer)	-

-
Facility for chemical testing is not available

14763

BIS, Northern Regional Laboratory (NRL)

None

IS 2681 (1993)

Non - Ferrous metal sliding door bolts (Aldrops) for use with padlocks - Specification (Third Revision)

1500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1-Total 2 (DIMENSIONS AND TOLERANCES-A)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-B)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-C)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-D)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-E)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-F)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-G)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-H)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-J)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-K)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-L)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-M)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-N)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-Q)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-S)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-T)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-W)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-A)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-B)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-C)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-D)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-E)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-F)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-G)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-H)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-J)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-K)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-L)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-M)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-Pin dia)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-R)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-T)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-U)	-
7.1 (MANUFACTURE-General)	-
7.1 (MANUFACTURE-General)	-
7.1 (MANUFACTURE-General)	-
7.1 (MANUFACTURE-General)	-
7.1 (MANUFACTURE-General)	-
8.1 (FINISH)	-

-
Facility for chemical testing is not available

14764

BIS, Northern Regional Laboratory (NRL)

None

IS 5022 (1989)

Sterilizer, instruments, table model (Third Revision)

Please see remarks. View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1, Table 1 (Length (IS 5022))	-
5.1, Table 1 (Width (IS 5022))	-
5.1, Table 1 (Working Depth (IS 5022))	-
5.2 (Thickness of Body (IS 5022))	-
5.2 ( Thickness of Lid (IS 5022))	-
8.2.1 (Electric Operation (IS 5022))	-
8.2.3 (Heating Element (IS 4159))	-
8.4 (Kerosene Operation (IS 5022))	-
9.1 (Finish (IS 5022))	-
8.3 (Gas Operation (IS 5022))	-
Clause - 3.1 (CARBON)	-
Clause - 3.1 (SULPHUR)	-
Clause - 3.1 (PHOSPHURS)	-
Clause - 3.1 (MANGANESE)	-
Clause - 3.1 (NITROGEN)	-
Clause - 3.1 (SILICON)	-
Clause - 3.1 (CHROMIUM)	-
Clause - 3.1 (NICKEL)	-

-
-

14765

BIS, Central Laboratory (CL)

None

IS 14807 (2000)

Phosphate solubilising bacterial inoculant (PSBI) - Specification

Rs.8740/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
CL 4.4 (pH)	-
CL 4.1 (Phosphate Solubilising Bacterial cells)	-
CL 4.2 (Color)	-
CL 4.3 (Dilution)	-
CL 4.5 (Phosphate solubilising)	-

-
-

14766

BIS, Central Laboratory (CL)

None

IS 16892 (2018)

Sattu - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.7-Table 1- vii (Total bacterial count (Special Grade)- IS 5402)	-
4.7-Table 1- vii (Total bacterial count, (Standard Grade) - IS 5402)	-
4.7-Table 1- vii (Total bacterial count, (General Grade) - IS 5402)	-
4.7-Table 1- vii (Total bacterial count (Special Grade)- IS 5402)	-

-
-

14767

BIS, Central Laboratory (CL)

None

IS 798 (2020)

Orthophosphoric Acid — Specification ( Third Revision )

Rs.14822/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Description)	-
5.2.2 Table 1 (i) (Relative density )	-
5.2.2 Table 1 (ii) (Orthophosphoric acid (H3 PO4 ))	-
5.2.2 Table 1 (iii) (Iron (as Fe), )	-
5.2.2 Table 1 (iv) (Chlorides (as Cl), )	-
5.2.2 Table 1 (v) (Sulphates (as SO4 ), )	-
5.2.2 Table 1 (vi) (Arsenic (as As2 O3 ), )	-
5.2.2 Table 1 (vii) (Antimony (as Sb2 O3 ), )	-
5.2.2 Table 1 (viii) (Nitrates (as NO3 ),)	-
5.2.2 Table 1 (ix) (Lead (as Pb), parts per million, Max)	-
5.2.2 Table 1 (x) (Silica (as SiO2 ), )	-
5.2.2 Table 1 (xi) (Calcium (as Ca) and Magnesium (as Mg), )	-
5.2.2 Table 1 (xii) (Oxygen absorbed (as O),)	-
5.2.2 Table 1 (xiii) (Volatile acids)	-
5.2.2 Table 1 (xiv) (Manganese (as Mn), )	-
5.2.2 Table 1 (xv) (Molybdenum (as Mo), )	-
5.2.2 Table 1 (xvi) (Mercury (as Hg), )	-
5.2.2 Table 1 (xvii) (Aluminium (as Al), )	-

-
-

14768

BIS, Northern Regional Laboratory (NRL)

None

IS 4003 : Part 1 (1978)

Specification for pipe wrenches: Part 1 general purpose (First Revision)

Rs. 3600/- and testing charges as per referred Iss View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 (Dimensions- Nominal Size)	-
3 (Dimensions-Minimum capacity)	-
3 (Dimensions- Nominal Size)	-
3 (Dimensions-Maximum capacity, D)	-
3 (Dimensions- Jaw Thickness,T min)	-
3 (Dimensions- Length of movablejae, l1)	-
3 (Dimensions- Length of Handle, l2)	-
3 (Dimensions- Width of Nut, N)	-
5 (Hardness- Jaws)	-
5 (Hardness- Handle of movable Jaw)	-
5 (Hardness- Shank of movable Jaw)	-
3 (Dimensions- Length of movablejae, l1)	-
6.1 (Manufacture- Handel)	-
6.2 (Manufacture- Movable Jaw)	-
6.3 (Manufacture- Adjusting Nut)	-
6.4 (Manufacture- Frame)	-
6.5 (Manufacture- Hinge Pin)	-
6.6 (Manufacture- Spring)	-
7 (Workmanship & Finish)	-
7 (Workmanship & Finish)	-
7 (Workmanship & Finish)	-
4 AND AS PER IS 1570 PART 2 (CARBON)	-
4 AND AS PER IS 1570 PART 2 (SULPHUR)	-
4 AND AS PER IS 1570 PART 4 (SILICON)	-
4 AND AS PER IS 1570 PART 2 (MANGANESE)	-
4 AND AS PER IS 1570 PART 2 (PHOSPHORUS)	-

-
Mechanical:Test facility is complete Chemical: Partial (Test facility for chromium is not available) If sample part is weighing less than 10 g, part may be send separately e.g. Pin, spring

14769

BIS, Central Laboratory (CL)

None

IS 797 (1982)

Specification for common salt for chemical industries (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.3.1 (Description)	-
Cl.3.2.1 (Moisture Content For Grade 1 material (Annex A2))	-
Cl.3.2.2 (Moisture Content For Grade 2 material (Annex A2))	-
Table 1 Cl.3.3 (Sodium Chloride (as NaCl) For Grade 1 material (Annex A3))	-
Table 1 Cl.3.3 (Sodium Chloride (as NaCl) For Grade 2 material (Annex A3))	-
Table 1 Cl.3.3 (Material insoluble in water For Grade 1 material (Annex A4))	-
Table 1 Cl.3.3 (Material insoluble in water For Grade 2 material (Annex A4))	-
Table 1 Cl.3.3 (Calcium salts (as Ca) For Grade 1 material (Annex A5))	-
Table 1 Cl.3.3 (Calcium salts (as Ca) For Grade 2 material (Annex A5))	-
Table 1 Cl.3.3 (Magnasium salts (as Mg) For Grade 1 material (Annex A5))	-
Table 1 Cl.3.3 (Magnasium salts (as Mg) For Grade 2 material (Annex A5))	-
Table 1 Cl.3.3 (Sulphates (as SO4) For Grade 1 material (Annex A6))	-
Table 1 Cl.3.3 (Sulphates (as SO4) For Grade 2 material (Annex A6))	-
Table 1 Cl.3.3 (Iron compound (as Fe) For Grade 1 material (Annex A7))	-
Table 1 Cl.3.3 (Iron compound (as Fe) For Grade 2 material (Annex A7))	-

-
500 gm x 3

14770

BIS, Northern Regional Laboratory (NRL)

None

IS 3993 (1993)

Trays, instruments - Specification (Second Revision)

Please see remarks. View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.2 -Table-1 (Length -A - IS 3993)	-
5.2 -Table-1 (Width -B - IS 3993)	-
5.2 -Table-1 (Height -C - IS 3993)	-
5.2 -Table-1 (Minimum Finished Thickness - IS 3993)	-
5.2.1 (Thickness of enamel - IS 3993)	-
6.1 & 6.2 (Manufacture, workmanship and finish of Stainless Steel Tray)	-
6.1 & 6.3 (Manufacture, workmanship and finish of Enamelled Iron Trays - IS 3993)	-
6.1 & 6.4 (Manufacture, workmanship and finish of Glass Trays - IS 3993)	-
8 (MARKING)	-

-
Test facility is complete Facility for chemical testing is not available

14771

BIS, Western Regional Laboratory (WRL)

None

IS 8951 (2001)

Steel cast billet ignots, billets and blooms for production of high carbon steel wire rods - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4,7.1 & 7.2 Table 1 (Carbon- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 & 7.2 Table 1 (Manganese- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 & 7.2 Table 1 (Silicon- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 & 7.2 Table 1 (Sulphur- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 & 7.2 Table 1 (Phosphorous- IS 228 or any other established instrumental /Chemical method)	-

-
Test facilities are not available for the following: 1. Cu, Ni, Cr 2.Microexamination 3.Sulphur Print Test 4.Inclusion Content

14772

BIS, Western Regional Laboratory (WRL)

None

IS 8952 (1995)

Steel ingots, blooms and billets for production of mild steel wire rods for general engineering purposes - Specification (First Revision)

Rs 4840/ View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4,7.1 Table 1 (Carbon- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 Table 1 (Manganese- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 Table 1 (Sulphur- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 Table 1 (Phosphorous- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 Table 1 (Silicon- IS 228 or any other established instrumental /Chemical method)	-

-
Test facilities are not available for the following: 1. Al, Micro alloying element 2.Microexamination 3.Sulphur Print Test 4.Inclusion Content

14773

BIS, Northern Regional Laboratory (NRL)

None

IS 3992 (1982)

Specification for trays, kidney (First Revision)

Rs.1275/- and material testing charges as per relevant View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2, Table-1,1 (Length -A - IS 3992)	-
4.2, Table-1,2 (Width -B - IS 3992)	-
4.2, Table-1,3 (Height -C - IS 3992)	-
4.2, Table-1,7 (Minimum Thickness of material)	-
5.0 &5.1 (Workmanship and finish of stainless steel Trays)	-
5.0 & 5.2 (Workmanship and finish of Enamelled Iron Trays)	-
7 (Marking - IS 3992)	-

-
Test facility is complete Facility for chemical testing is not available

14774

BIS, Western Regional Laboratory (WRL)

None

IS 9294 (1979)

Cold-Rolled Stainless Steel Strips for Razor Blades

1725/ View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Carbon- appropriate parts of IS 228)	-
4.1 (Manganese- appropriate parts of IS 228)	-
4.1 (Silicon- appropriate parts of IS 228)	-
4.1 (Sulphur- appropriate parts of IS 228)	-
4.1 (Phosphorous- appropriate parts of IS 228)	-

-
Test facilities are not available for the following: 1. Cr 2.Hardness Test 3. Microstructure 4. Carbide Density "

14775

BIS, Eastern Regional Laboratory (ERL)

None

IS 2879 (1998)

Mild steel for metal arc welding electrodes - Specification (Third Revision)

For all designation except tests mentioned in remarks

Testing charges are Rs.9050/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 & 9 (Diameter)	-
Cl 7 (Workmanship)	-
6 (Carbon %)	-
6 (Manganese %)	-
6 (Phosphorus %)	-
6 (Sulphur %)	-
6 ( Copper %)	-
6 ( Aluminium %)	-
6 ( Ti)	-
6 (Cr+ Mo+ Ni)	-
6 (Silicon %)	-
6 (V)	-
6 (Cr)	-
6 (Ni)	-
6 (Mo)	-

-
Chem- Facility not available for V, Ti, Al (Classification to be declared)

14776

BIS, Central Laboratory (CL)

None

IS 1239 : Part 1 (2004)

Steel tubes, tubulars and other wrought steel fittings - Specification: Part 1 steel tubes (Sixth Revision)

Rs. 9200/- Excluding test on joints View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 (Outer Diameter, Thickness & Mass)	-
Cl 10.1.1 (Manufacturing )	-
Cl 12 (Workmanship)	-
Cl 14 (Tensile Test, Flattening Test & Bend Test)	-
Cl 15 (Workmanship)	-
7, 6.1.1 (CARBON)	-
7, 6.1.1 (SULPHUR)	-
7, 6.1.1 (PHOSPHURS)	-
7, 6.1.1 (MANGANESE)	-
7, 6.1.1 (SILICON)	-
7, 6.1.1 (ALUMINIUM)	-
7, 6.1.1 (NITROGEN)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm; Excluding "-; i) Joint (Cl 10.1) , ii) Leak Proof Test (Cl 13)"

14777

BIS, Central Laboratory (CL)

None

IS 1785 : Part 2 (1983)

Specification for plain hard drawn steel wire for prestressed concrete: Part 2 as - Drawn wire (First Revision)

Rs 3000/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5.1 (Diameter)	-
Cl 5.1.2 (Weight)	-
Cl 6.1 (Tensile Test On UTM)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm; Excluding -; Relaxation (Cl 6.5), Proof Stress (Cl 6.2)

14778

BIS, Central Laboratory (CL)

None

IS 11785 (1986)

Specification for captan (Wettable Powder) WP

Rs 3650.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.1 (Description)	-
2.3 Table 2 i (Captan content)	-
2.3 Table 2 ii (Sieving requirement)	-
2.3 Table 2 iii (Suspensibility)	-
2.3 Table 2 iv (Wettability)	-
2.3 Table 2 v (Acidity/Alkalinity)	-

-
-

14779

BIS, Western Regional Laboratory (WRL)

None

IS 9476 (1980)

Specification for cold-rolled steel strips for carbon steel razor blades

525 for Physical + carbide density test View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Carbon- IS 228)	-
4.1 (Manganese- IS 228)	-
4.1 (Silicon- IS 228)	-
4.1 (Sulphur- IS 228)	-
4.1 (Phosphorous- IS 228)	-

-
Test facilities are not available for the following: 1. Cr 2.Hardness Test 3. Microstructure 4. Carbide Density "

14780

BIS, Central Laboratory (CL)

None

IS 1785 : Part 1 (1983)

Specification for plain hard - Drawn steel wire for prestressed concrete: Part 1 cold drawn stress - Relieved wire (Second Revision)

Rs. 27300.00 (Complete testing charges) Rs. 9300.00 (F View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5.1 (Diameter)	-
Cl 6.1 (Tensile Test On UTM)	-
Cl 6.3 (Reverse Bend Test)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm; Excluding -; Relaxation (Cl 6.5), Proof Stress (Cl 6.2)

14781

BIS, Central Laboratory (CL)

None

IS 11010 (1984)

Specification for ziram colloidal suspension

Rs.3500.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.1 (Description)	-
2.2 Table 2 i (Ziram content)	-
2.2 Table 2 iv (pH of suspension at 27°C)	-
2.2 Table 2 iii (Colloidal content)	-
2.2 Table 2 iv (pH of suspension at 27°C)	-

-
-

14782

BIS, Central Laboratory (CL)

None

IS 2879 (1998)

Mild steel for metal arc welding electrodes - Specification (Third Revision)

Testing charges are Rs.9050/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 7 (Workmanship)	-
Cl 8 & 9 (Diameter)	-
6 (Carbon %)	-
6 (Manganese %)	-
6 (Phosphorus %)	-
6 (Sulphur %)	-
6 (Silicon %)	-
6 ( Copper %)	-
6 ( Aluminium %)	-
6 ( Nb)	-
6 (V)	-
6 ( Ti)	-
6 (Cr)	-
6 (Mo)	-
6 (Ni)	-
6 (Cr+ Mo+ Ni)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

14783

BIS, Central Laboratory (CL)

None

IS 4270 (2001)

Steel tubes used for water wells specification (Third Revision)

Rs.7500/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 6 (Tensile Test & Flattening Test)	-
Cl 7 (Outer Diameter, Thickness, Mass & Straightness)	-
Cl 9 (Pipe ends, Angle of bevel & Root Face )	-
Cl 10 (Outer Diameter & Overall Length)	-
Cl 12 (Bituminous Coating & Galvanizing )	-
Cl 14 (Workmanship)	-
5.2 (sulphur)	-
5.2 (phosphorus)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm; Excluding -; Hydrostatic test (Cl 8)

14784

BIS, Western Regional Laboratory (WRL)

None

IS 9516 (1980)

Specification for heat resisting steels

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1,5.2,5.3 Table 4 (Carbon-Relevant parts of IS 228)	-
5.1,5.2,5.3 Table 4 (Silicon-Relevant parts of IS 228)	-
5.1,5.2,5.3 Table 4 (Manganese-Relevant parts of IS 228)	-
5.1,5.2,5.3 Table 4 (Sulphur-Relevant parts of IS 228)	-
5.1,5.2,5.3 Table 4 (Phosphorous-Relevant parts of IS 228)	-

-
Test facility not available for the following: 1. Mo, Cu, V, Ni

14785

BIS, Central Laboratory (CL)

None

IS 7887 (1992)

Mild steel wire rod for general engineering purposes - Specification (First Revision)

Rs.7200/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 (Workmanship)	-
Cl 9 (Nominal Diameter & Out Of Shape)	-
6.1 (Carbon %)	-
6.1 (Sulphur %)	-
6.1 (Phosphorus %)	-
6.1 (Manganese %)	-
6.1 (Silicon %)	-
6.1 ( Aluminium %)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

14786

BIS, Western Regional Laboratory (WRL)

None

IS 963 (1958)

Specification for chrome molybdenum steel bars and rods for aircraft purposes

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1 (Silicon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1 (Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1 (Suphur- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1 (Phosphorous- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-

-
Test facilities are not available for the following: 1. Hardenbility 2.Micro Examination (Sulphur Print Test) 3. Grain Size 4.Decarburization 5. Mo, Ni, Cr

14787

BIS, Central Laboratory (CL)

None

IS 6913 (1973)

Specification for stainless steel tubes for the food and beverage industry

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 5.1, Table 1 (Carbon )	-
Cl. 5.1, Table 1 (Sulphur)	-
Cl. 5.1, Table 1 (Phosphorus)	-
Cl. 5.1, Table 1 (Manganese)	-
Cl. 5.1, Table 1 (Nickel)	-
Cl. 5.1, Table 1 (Chromium)	-
Cl. 5.1, Table 1 (Molybdenum)	-

-
Steel grade designation as per Table 2 may be declared. Sample 5x5 cm having size dia> 3mm and thickness> 0.8 mm.; Excluding Except corrosion test;

14788

BIS, Central Laboratory (CL)

None

IS 10748 (2004)

Hot - Rolled steel strip for welded tubes and pipes - Specification (Second Revision)

Please see remarks View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 & Table 3 (UTM)	-
Cl 9 (Press)	-
Cl 11 (Workmanship)	-
Cl 12 & 13 (Length, Width & Thickness)	-
7.1 (Carbon %)	-
7.1 (Sulphur %)	-
7.1 (Phosphorus %)	-
7.1 (Manganese %)	-
7.1 (Silicon %)	-
7.1 ( Aluminium %)	-
7.1 ( Nitrogen%)	-
7.1 ( Copper %)	-
7.1 ( Nb)	-
7.1 (V)	-
7.1 ( Ti)	-
7.1 (Cr)	-
7.1 (Mo)	-
7.1 (Ni)	-
7.1 (CE)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

14789

BIS, Central Laboratory (CL)

None

IS 6902 (1973)

Specification for steel wire for spokes

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 4.1 (Carbon- IS 228)	-
Cl. 4.1 (Manganese- IS 228.)	-
Cl. 4.1 (Sulphur- IS 228.)	-
Cl. 4.1 (Phosphorus- IS 228.)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

14790

BIS, Western Regional Laboratory (WRL)

None

IS 11587 (1986)

Specification for structural weather resistant steels

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 5.1, Table -1 (WR-Fe 480 A, C )	-
Clause 5.1, Table -1 (WR-Fe 480 A, Si)	-
Clause 5.1, Table -1 (WR-Fe 480 A, Mn)	-
Clause 5.1, Table -1 (WR-Fe 480 A, P )	-
Clause 5.1, Table -1 (WR-Fe 480 A, S )	-
Cl 8 (Tensile Test)	-
Cl 9 (Bend Test)	-
Cl 12 (Freedom from Defects)	-
Cl 10 (Impact Test)	-
Cl 11 (Flattening Test)	-
Cl 13 (Dimensions)	-
Cl 8 (Tensile Test)	-
Cl 9 (Bend Test)	-
Cl 12 (Freedom from Defects)	-
Cl 10 (Impact Test)	-
Cl 11 (Flattening Test)	-
Cl 13 (Dimensions)	-

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number