BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15634 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

14791

BIS, Eastern Regional Laboratory (ERL)

None

IS 6240 (2008)

Hot rolled steel plate (Up To 6 Mm) sheet and strip for the manufacture of low pressure liquefiable gas cylinders (Fourth Revision)

For all grades except test mentioned in remarks

Rs.9710/- excluding Erichsen cupping test. View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 7 (UTM)	-
Cl 8 (Press)	-
Cl 9 (Strainage Embrittlement)	-
Cl 10 (Erichsen Cupping)	-
Cl 13 (Length, Width & Thickness)	-
6.1 (Carbon %)	-
6.1 (Silicon %)	-
6.1 (Manganese %)	-
6.1 (Phosphorus %)	-
6.1 (Sulphur %)	-
6.1 ( Aluminium %)	-
6 (Niobium as Nb)	-
6 (Titanium as Ti)	-
6 (Vanadium as V)	-
6.1 (Nitrogen%)	-

-
Chem- Sheet Thickness Should be Greater than 0.5 mm Requirement: Grade to be declared

14792

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 10322 : Part 5 : Sec 8 (2013)

Luminaires: Part 5 particular requirements: Sec 8 emergency lighting

Rs. 63,600.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (General Test Requireements)	-
5 (Classification of Luminaires')	-
6.0 (Marking)	-
7.0 (Construction)	-
8.0 (Creepage Distance and Clearances)	-
9.0 (Provision for earthing)	-
10.0 (Terminals)	-
11.0 (External & Internal Wiring)	-
12.0 (Protection against electric shock)	-
13.0 (Endurance Tests and Thermal Tests)	-
14.0 (Resistance to Dust & Moisture)	-
15.0 (Insulation Resistance and Electric Strength)	-
16.0 (Resistance to Heat , fire and tracking)	-

-
Complete testing facility excluding Cl.7 Construction ( Cl. 4.20 Rough Service Luminaires — Vibrant Requirements and Cl. 4.24 UV Radiation of IS 10322 (Part 1):2014 ) Cl. 17 Functional safety, Cl. 18 Changeover operation and Cl. 19 High temperature operation.

14793

BIS, Northern Regional Laboratory (NRL)

None

IS 8042 (2015)

White portland cement - Specification (Third Revision)

Rs 12050/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 -Table 2- i (Fineness 4031 Part 2)	-
6 -Table 2- ii- a (Expansion by Le Chatelier- 4031 Part 3)	-
6 -Table 2- ii- a (Expansion after aeration - 4031 Part 3)	-
6 -Table 2- ii- b (Expansion by Autoclave- 4031 Part 3)	-
6-Table 2- ii- b (Expansion after aeration- 4031 Part 3)	-
6 -Table 2- iii- a (Setting Time Initial- 4031 Part 5)	-
6 -Table 2- iv- a (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-
5 - Table - 1 iii (Insoluble residue - Cl 4.10 of IS 4032:1985)	-
5 - Table - 1 i (Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-
5 - Table - 1 iv (Magnesia - Cl 4.8 of IS 4032:1985)	-
5 - Table - 1 v (Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-
5 - Table - 1 vi (Loss on ignition - Cl 4.2 of IS 4032:1985)	-
5 - Table - 1 vii (Chloride content - Cl 4.13 of IS 4032:1985)	-
5 - Table - 1 ii (Iron oxide - Cl 4.5 of IS 4032:1985)	-
5 - Table - 1 iii (Insoluble residue - Cl 4.10 of IS 4032:1985)	-

-
Excluding Degree of whiteness in terms of reflectance, Optional Test Transverse Strength

14794

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 10322 : Part 5 : Sec 7 (2017)

Luminaires: Part 5 particular requirements: Sec 7 lighting chains (First Revision)

Rs. 60,000.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
20.4 (General Test Requireements)	-
20.5 (Classification of Luminaires')	-
20.6 (Marking)	-
20.7 (Construction)	-
20.8 (Creepage Distance and Clearances)	-
20.9 (Provision for earthing)	-
20.10 (Terminals)	-
20.11 (External & Internal Wiring)	-
20.12 (Protection against electric shock)	-
20.13 (Endurance Tests and Thermal Tests)	-
20.14 (Resistance to Dust & Moisture)	-
20.15 (Insulation Resistance and Electric Strength)	-
20.16 (Resistance to Heat , fire and tracking)	-

-
Complete testing facility excluding clause 20.7 - Construction ( Cl. 4.20 - Rough Service Luminaires — Vibrant Requirements and Cl. 4.24 - UV Radiation of IS 10322 (Part 1):2014 ).

14795

BIS, Northern Regional Laboratory (NRL)

None

IS 7231 (1994)

plastic flushing cisterns for waterclosets and urinals

Rs.8100/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5.1 (Cistern)	-
Cl 5.2 (Cover)	-
Cl 5.3 (Flush pipe)	-
Cl 5.3.1 (Flush pipe connection to cistern.)	-
Cl 5.4 (Inlet and overflow holes)	-
Cl 5.6 (Operating mechanism / lever)	-
Cl 5.8 (Overflow pipe)	-
4 ,Table- 1, S.No 2 AND AS PER IS 1239-1 (CARBON)	-
4 ,Table- 1, S.No 2 AND AS PER IS 1239-1 (SULPHUR)	-
4 ,Table- 1, S.No 2 AND AS PER IS 1239-1 (MANGANESE)	-
4 ,Table- 1, S.No 2 AND AS PER IS 1239-1 (PHOSPHORUS)	-

-
Test facility not availabe

14796

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 10322 : Part 5 : Sec 6 (2013)

Luminaires: Part 5 particular requirements: Sec 6 handlamps

Rs. 62,700.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (General Test Requireements)	-
5 (Classification of Luminaires')	-
6.0 (Marking)	-
7.0 (Construction)	-
8.0 (Creepage Distance and Clearances)	-
9.0 (Provision for earthing)	-
10.0 (Terminals)	-
11.0 (External & Internal Wiring)	-
12.0 (Protection against electric shock)	-
13.0 (Endurance Tests and Thermal Tests)	-
14.0 (Resistance to Dust & Moisture)	-
15.0 (Insulation Resistance and Electric Strength)	-
16.0 (Resistance to Heat , fire and tracking)	-

-
Complete testing facility excluding Cl. 7 Construction ( Cl. 4.20 Rough Service Luminaires — Vibrant Requirements and Cl. 4.24 UV Radiation of IS 10322 (Part 1):2014 ).

14797

BIS, Southern Regional Laboratory (SRL)

None

IS 4270 (2001)

Steel tubes used for water wells specification (Third Revision)

Rs.7500/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 6 (Tensile Test & Flattening Test)	-
Cl 7 (Outer Diameter, Thickness, Mass & Straightness)	-
Cl 14 (Workmanship)	-
5.2 (phosphorus)	-
5.2 (sulphur)	-

-
" mech - 3 m Chemical Facility is available Quantity: 5 Pieces of 5cm X 5cm Excluding except Hydrostatic test, Pipe tube/ends, Sockets, Alignment test, Protective Coating, Protection of ends

14798

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 10322 : Part 5 : Sec 5 (2013)

Luminaires: Part 5 particular requirements: Sec 5 floodlights (First Revision)

Rs. 62,700/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (General Test Requireements)	-
5 (Classification of Luminaires')	-
6.0 (Marking)	-
7.0 (Construction)	-
8.0 (Creepage Distance and Clearances)	-
9.0 (Provision for earthing)	-
10.0 (Terminals)	-
11.0 (External & Internal Wiring)	-
12.0 (Protection against electric shock)	-
13.0 (Endurance Tests and Thermal Tests)	-
14.0 (Resistance to Dust & Moisture)	-
15.0 (Insulation Resistance and Electric Strength)	-
16.0 (Resistance to Heat , fire and tracking)	-

-
Complete testing facility excluding Cl. 7 Construction ( Cl. 4.20 Rough Service Luminaires — Vibrant Requirements and Cl. 4.24 UV Radiation of IS 10322 (Part 1):2014 ) and Cl. 17 Photometric test.

14799

BIS, Northern Regional Laboratory (NRL)

None

IS 14542 (1998)

Partly skimmed milk powder specification

ALL TYPE

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Table 1(i) (Moisture Type I (IS 11623))	-
Table 1(i) (Moisture Type II (IS 11623))	-
Table 1(ii) (Total solids (milk solids and added salts) Type I (IS 11623))	-
Table 1(ii) (Total solids (milk solids and added salts) Type II (IS 11623))	-
Table 1(iii) (Milk fat, Type I (IS I1722))	-
Table 1(iii) (Milk fat, Type II (IS I1722))	-
Table 1(iv) (Insolubility index, a) Roller dried Type I (IS 12759))	-
Table 1(iv) (Insolubility index, a) Roller dried Type II (IS 12759))	-
Table 1(iv) (Insolubility index, b) Spray dried Type I (IS 12759))	-
Table 1(iv) (Insolubility index, b) Spray dried Type II (IS 12759))	-
Table 1(v) (Total ash Type I (Annex B of IS 14433 - Part 1))	-
Table 1(v) (Total ash Type II (Annex B of IS 14433 - Part 1))	-
Table 1(vi) (Titratable acidity (as lactic acid) Type I (IS 11766))	-
Table 1(vi) (Titratable acidity (as lactic acid) Type II (IS 11766))	-
Cl 6.6.1 (Bacterial Count (IS 5402))	-
Cl 6.6.2 (Coliform Count ((IS 5402))	-

-
Test facility is complete

14800

BIS, Southern Regional Laboratory (SRL)

None

IS 8784 (1987)

Specification for thermocouple compensating cables (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Type of thermocouple)	-
4.1 (Conductor)	-
5 (INSULATION AND SHEATH)	-
6 (ARMOURING)	-
7 (SHIELDING)	-
8.1 (NOISE REDUCTION: Drain Wire)	-
8.2 (NOISE REDUCTION)	-
9.1 (DIMENSION : Single Wire)	-
9.1.1 (DIMENSION : Single Wire (Tolerances))	-
9.1.2 (DIMENSION : Single Wire (Ovality))	-
9.2.1 (Thickness of Insulation )	-
9.2.2 (Thickness of Sheath )	-
9.3 (Dimension of cable )	-
10.1 (Colour Code )	-
11.1 (ENVIRONMENTS FOR USE OF DIFFERENT THERMOCOUPLE COMPENSATING CABLES)	-
12.1 (INFORMATION TO BE SUPPLIED BY THE MANUFACTURER)	-
13.1 (PACKING AND MARKING)	-
13.2 (PACKING AND MARKING)	-
13.2.1 (Standard Mark)	-
14.3 (Resistance Test)	-
14.4.1 ( Thickness of Insulation)	-
14.4.2.1 ( Thickness of Sheath : Round )	-
14.4.2.2 ( Thickness of Sheath : Oval )	-
14.5 (Insulation Resistance Test :Volume resistivity ( Before High Voltage test ))	-
15.5 (Insulation Resistance Test :Insulation resistance constant ( Before High Voltage test ))	-
14.5 (Insulation Resistance Test: Volume resistivity ( After High Voltage test ))	-
15.5 (Insulation Resistance Test: Insulation Resisatnce constant ( After High Voltage test ))	-
14.7 (H.V. Test )	-
14.8 (Heat Shock Test)	-

-
Excluding Except Thermal EMF Test (14.2), Rubber (5.1) and Asbestos (5.3)

14801

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 10322 : PART 5 : SEC 3 (2012)

Luminaires: Part 5 particular requirements: Sec 3 luminaires for road and street lighting (First Revision)

62,700.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (General Test Requireements)	-
5 (Classification of Luminaires')	-
6.0 (Marking)	-
7.0 (Construction)	-
8.0 (Creepage Distance and Clearances)	-
9.0 (Provision for earthing)	-
10.0 (Terminals)	-
7.0 (Construction)	-
11.0 (External & Internal Wiring)	-
12.0 (Protection against electric shock)	-
13.0 (Endurance Tests and Thermal Tests)	-
14.0 (Resistance to Dust & Moisture)	-
15.0 (Insulation Resistance and Electric Strength)	-
16.0 (Resistance to Heat , fire and tracking)	-

14802

BIS, Northern Regional Laboratory (NRL)

None

IS 9762 (1994)

Specification for polyethylene floats (Spherical) for float valves

Rs.4500/ View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6, 6.1 (Table 1) (Dimensions and Tolerances)	-
6.2.1 (Wall Thickness)	-
6.2.2 (Wall Thickness)	-
6, 6.1 (Table 1) (Tapping of boss, A)	-
6, 6.1 (Table 1) (Insert wall thickness, t ( below threads ))	-
6, 6.1 (Table 1) (Insert base thickcess, T)	-
6, 6.1 (Table 1) (Axial length of thread, B (min))	-
cl 8.1 (Leakage & water ab. Test)	-
cl 8.2 (Deflection Test)	-
cl 8.3 (Impact test)	-
cl 8.4 (Boss test)	-

-
Excluding dimensional test

14803

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 10322 : Part 5 : Sec 2 (2012)

Luminaires: Part 5 particular requirements: Sec 2 recessed luminaires (First Revision)

59,100.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (General Test Requireements)	-
5 (Classification of Luminaires')	-
6 (Marking)	-
7 (Construction)	-
8 (Creepage Distance and Clearances)	-
9 (Provision for earthing)	-
10 (Terminals)	-
11 (External & Internal Wiring)	-
12 (Protection against electric shock)	-
13 (Endurance Tests and Thermal Tests)	-
14 (Resistance to Dust and Moisture)	-
15 (Insulation Resistance and Electric Strength)	-
16 (Resistance to Heat , fire and tracking)	-

14804

BIS, Eastern Regional Laboratory (ERL)

None

IS 7494 (1981)

Specification for steel for valves for internal combustion engines (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 6.1, 6.2, 6.3, & Table 1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1, 6.2, 6.3, & Table 1 (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1, 6.2, 6.3, & Table 1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1, 6.2, 6.3, & Table 1 (Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1, 6.2, 6.3, & Table 1 (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1, 6.2, 6.3, & Table 1 (Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1, 6.2, 6.3, & Table 1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1, 6.2, 6.3, & Table 1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1, 6.2, 6.3, & Table 1 (Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1, 6.2, 6.3, & Table 1 (Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
5 (Freedom from defects)	-
8 (Hardness , max-IS 1500 )	-
9.1, Table 5 (Yield Strength, Mpa)	-
9.1, Table 5 (Tensile Strength, Mpa)	-
9.1, Table 5 (Elongation, %)	-
9.1, Table 5 (Reduction in area, Percent)	-
12 (Dimensions and Tolerances, mm)	-
Cl. 6.1, 6.2, 6.3, & Table 1 (Tungsten- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1, 6.2, 6.3, & Table 1 (Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-

-
Chem-Facility not available for Nb,Ti,Mo(>1.5%) (50 gm drillings to be provided) Mech- except Tensile at elevated temp

14805

BIS, Southern Regional Laboratory (SRL)

None

IS 3589 (2001)

Steel pipes for water and sewage (168.3 To 2540 Mm Outside Diameter) - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
11.1, Table 5. (Outside Diameter (OD))	-
11.1, Table 5. (Thickness)	-
11.1, Table 5. (Mass)	-
14.1 (Visual inspection, Appearance and Workmanship)	-
14.4 (Visual inspection, Appearance and Workmanship-Dent Length)	-
12.3.3 (Ovality)	-
12.5 (Strightness)	-
8.1 Table 2 Table 3 (Carbon Content IS 228)	-
8.1 Table 2 Table 3 (Manganese Content IS 228)	-
8.1 Table 2 Table 3 (Phosphorus Content IS 228)	-
8.1 Table 2 Table 3 (Sulphur Content IS 228)	-

-
" 2 mt Chemical Facility is available Quantity: 5 Pieces of 5cm X 5cm excluding Hydraulic Pressure Test, Guided Bend Test. Prepared test piece needed for Tensile test Facility

14806

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 10322 : Part 5 : Sec 1 (2012)

Luminaires: Part 5 particular requirements: Sec 1 fixed general purpose luminaires (First Revision)

Rs. 60,000.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (General Test Requireements)	-
5 (Classification of Luminaires')	-
6.0 (Marking)	-
7.0 (Construction)	-
8.0 (Creepage Distance and Clearances)	-
9.0 (Provision for earthing)	-
10.0 (Terminals)	-
11.0 (External & Internal Wiring)	-
12.0 (Protection against electric shock)	-
13.0 (Endurance Tests and Thermal Tests)	-
14.0 (Resistance to Dust & Moisture)	-
15.0 (Insulation Resistance and Electric Strength)	-
16.0 (Resistance to Heat , fire and tracking)	-

14807

BIS, Southern Regional Laboratory (SRL)

None

IS 3575 (1993)

Bitumen drums - Specification (Third Revision)

1800.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Dimensions Drums (Figure 1))	-
4.1 (Dimensions Closure (Figure 2))	-
5.1 (Body and ends)	-
5.2 (Closures)	-
6.1 (Construction)	-
7.1 (Finish)	-
7.2 (Finish)	-
6.2 (Construction)	-
6.3 (Construction)	-
6.4 (Construction)	-
8 (Air Pressure Test)	-
4.1 (Dimensions Drums (Figure 1))	-

-
-

14808

BIS, Central Laboratory (CL)

None

IS 4308 (2019)

Dry Chemical Powders for Fire Fighting — BC, ABC and D Types — Specification ( Third Revision )

Rs 5770/- for both ordinary type & foam compatible type View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 5 Table 1(i) (Main Chemical constituent-Sodium/Potassium bicarbonate )	-
Clause 5 Table 1(iii) (Apparent density (Declared value by the manufacturer))	-
Clause 5 Table 1(iv) (Particle size / sieve analysis (Declared value by the manufacturer))	-
Clause 5 Table 1(vi) (Water repellency)	-
Clause 5 Table 1(vii) (Moisture content)	-
Clause 5 Table 1(xii) (colour)	-
Clause No. 5, Sr. No. V of Table 1, Annex-D (Hygroscopicity)	-

-
Rate of flow, Foam compatability, Fire test , Temperature resistance test;

14809

BIS, Southern Regional Laboratory (SRL)

None

IS 3502 (2009)

Steel chequered plates (Third Revision)

2985 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5 (Workmanship)	-
Cl 8 (Tensile Test)	-
Cl 9 (Press)	-
Cl 10 (Length, Width, Thickness & Chequered Height)	-
Cl 10 (Length, Width, Thickness & Chequered Height)	-
Cl 9 (Press)	-

-
" 1.5 sq m Excluding except Chemical tests

14810

BIS, Northern Regional Laboratory (NRL)

None

IS 1660 (2009)

Wrought aluminium utensils - Specification (First Revision)

Rs 6760/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Classification Heavy/Medium/L:ight)	-
4 (Material)	-
0.5 (Fabrication)	-
5.1 (The utensil shall be pressed or spun from one piece)	-
5.2 ( Body Thickness of the thinnest part of the finished utensil, mm Not declared )	-
5.2 (Lid Thickness of the finished utensil, mm)	-
6.1 & Table 1 ( i) Name of Utensil )	-
6.1 & Table 1 (ii) Shape of Utensil)	-
6.1 & Table 1 ( Nominal Size, mm)	-
6.1 & Table 1 (Inside dia, Φ D mm Not declared )	-
6.1 & Table 1 (Outside dia Ф NA)	-
6.1 & Table 1 (Height NA)	-
6.1 & Table 1 (Capacity, l NA)	-
6.1 ( Minimum sheet thickness for nominal size )	-
7.1 (HANDLES ,When fitted shall be of aluminium, stainless steel or of other suitable fire resistance material These shall be fastened to the utensils by tightly drawn aluminium or stainless steel rivets, by welding, by screwing to cast bosses or by riveting between flange at the end of the handles. Handles shall be so shaped and positioned to facilitate the carrying and handling of the utensils in normal use )	-
7.2 (Handles shall be sufficiently strong to support a mass in the utensils equivalent to three times the mass of the water capacity of the utensils in the position of normal use without visible permanent deformation of the handle or utensil)	-
8.1 (The utensils shall be clean reasonably free from distortion, dents, wrinkles, wavy surface, burrs, scratches, pitting and deep tool marks and other surface defects)	-
8.2 (The design of the utensils shall be such that it is easy to clean and prevent accumulation of dirt)	-
8.4.3 (Abrasion Resistance When the coating surface is rubbed two or three times with emery paper with emery conforming to grit number 180 using medium finger pressure, it shall not abrade the surface but shall skid over the surface showing not more than a trace of whitening of the surface)	-
8.4.4 (The colour of the hard anodic coating varies depending upon the alloy, thickness of the coating and electrolye. Normally the colour may vary from dark grey (almost black) to light grey. )	-
9 (The manufacturer shall provide full instructions for use and cleaning for coated or hard anodized utensils)	-
10 (Each vessel shall be legibly and indelibly stamped on the outside surface or handle with the manufacturer’s name or registered trade-mark, size and thickness or class. )	-

-
Excluding Material tests,anodized and non stick coating, test for lunch boxes.

14811

BIS, Southern Regional Laboratory (SRL)

None

IS 1783 : Part 2 (2014)

Drums large, fixed ends - Specification: Part 2 grade B drums (Fourth Revision)

5550 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (Capacity)	-
5 (Dimensions (Type 1 C Drums Figure 1))	-
5 (Dimensions (Type 1 D Drums Figure 1))	-
5 (Dimensions (Type 1 D Drums Figure 1))	-
5 (Dimensions (Type 1 D Drums Figure 1))	-
5 (Dimensions (Type 1 D Drums Figure 1))	-
5 (Dimensions (Type 1 D Drums Figure 1))	-
5 (Dimensions (Type 1 C Drums Figure 2))	-
5 (Dimensions (Type 1 C Drums Figure 2))	-
5 (Dimensions (Type 1 C Drums Figure 2))	-
5 (Dimensions (Type 1 C Drums Figure 2))	-
5 (Dimensions (Type 1 C Drums Figure 2))	-
5 (Dimensions (Type 1 C Drums Figure 2))	-
5 (Dimensions (Type 1 D Drums Figure 2))	-
6 (Material)	-
7 (Construction)	-
7.1 (Construction)	-
7.2 (Construction)	-
7.3 (Construction)	-
7.4 (Construction)	-
7.5 (Construction)	-
7.7 (Construction)	-
8 (Finish )	-
9.1 (Leakage at air pressure )	-
9.2 (Drop Test)	-
9.3 (Hydraulic Pressure Test)	-

-
-

14812

BIS, Northern Regional Laboratory (NRL)

None

IS 8794 (1988)

Specification for cast iron detachable joints for use with asbestos cement pressure pipes (First Revision)

3900/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1, Table 2 (External Dia of AC Pipe(D2))	-
6.1, Table 2 (Inside diaFlange(DI))	-
6.1, Table 2 (External Dia at Centre(DEC))	-
6.1, Table 2 (Thickness(t))	-
6.1, Table 3 (Nominal Dia of Bolt(do))	-
6.1, Table 3 (Minimum prefared length of bolt(L))	-
6.1, Table 4 (Mass of joints)	-
8.4 (Coating)	-

-
HST for size above 300 mm, Facility for Chemical tests not available

14813

BIS, Southern Regional Laboratory (SRL)

None

IS 3319 (1995)

Blades, surgical, detachable (Bard Parker Type) and handles - Specification (Fourth Revision)

Please check remarks View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8,8.1 (Sterilization)	-
8.2 (Sterilization)	-
5,5.1 & 5.2; Table 1 (Shape and dimensions)	-
6,6.1 (Workmanship and Finish)	-
6,6.2 (Workmanship and Finish)	-
6,6.3 (Workmanship and Finish)	-
6,6.4 (Workmanship and Finish)	-
7.1 (Hardness test)	-
9.1 ( Visual Examination)	-
9.2 ( Performance Test)	-
10.1.1 ( Marking on Blade)	-
10.1.2 (Packages of Non-sterile Blades)	-
10.1.3,10.1.3.1 (Packages of sterile Blades,Unit containers for sterile Blades)	-
10.1.3,10.1.3.2 (Packages of sterile Blades , Outer containers for sterile blade)	-
10.2 ( Handles)	-
10.2.2 ( Packages of Handles)	-

-
" Mech - 50 nos./ Micro - 30nos. except Chemical tests and Hardness

14814

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 15885 : Part 2 : Sec 13 (2012)

Safety of lamp controlgear: Part 2 particular requirements: Sec 13 d.c. or a.c. supplied electronic controlgear for led modules

Rs. 45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7 (Marking)	-
8 (Protection against accidental contact with live parts)	-
9 (Terminals)	-
10 (PROVISION FOR EARTHING)	-
11 (MOISTURE RESISTANCE)	-
12 (Electric Strength)	-
14 (Fault conditions)	-
15 (Transformer heating)	-
16 (Construction)	-
17 (Creepage distance and clearances)	-
18 (Screws, current carrying parts and connections)	-
19 (Resistance to heat, fire and tracking)	-
20 (Resistance to corrosion)	-

-
Complete

14815

BIS, Southern Regional Laboratory (SRL)

None

IS 432 : Part 2 (1982)

Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 2 Hard-Drawn Steel Wire

Rs 3900/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 4.1 (Workmanship)	-
Cl 5 & 6 (Diameter)	-
Cl 7 (UTM)	-
Cl 4.1 (Workmanship)	-
Cl 5 & 6 (Diameter)	-
Cl 7 (UTM)	-

-
1m Excluding TF for chemical tests not available.Tensile test Facility available till 20mm only

14816

BIS, Central Laboratory (CL)

None

IS 12367 (1988)

Specification for cold - Rolled carbon steel strips/coils for manufacture of welded tubes

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 & 4.2 (Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
4.1 & 4.2 (Sulphur- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
4.1 & 4.2 (Phosphorus- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
4.1 & 4.2 (Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
4.1 & 4.2 (Nitrogen- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

14817

BIS, Central Laboratory (CL)

None

IS 12337 (1988)

Specification for manually operated fertilizer broadcaster

Rs 600/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.3.1, Table-1 (Carbon)	-
Cl.3.1, Table-1 (Sulphur)	-
Cl.3.1, Table-1 (Phosphorus)	-
Cl.3.1, Table-1 (Manganese)	-
Cl.3.1, Table-1 (Silicon)	-
Cl.3.1, Table-1 (Aluminium)	-

-
-

14818

BIS, Eastern Regional Laboratory (ERL)

None

IS 7452 (1990)

Hot rolled steel sections for doors, windows and ventilators - Specification

Rs 1800/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
cl 6 (Dimensions)	-
cl 7 (MASS AND MASS TOLERANCE)	-
cl 8 (SURFACE FINISH)	-
cl 9 (BEND TEST)	-
5.1 (Carbon- IS 228(Part 1))	-
5.1 (Sulphur- IS 228(Part 9))	-
5.1 (Phosphorous- IS 228(Part 3))	-
5.1 (Manganese- IS 228(Part 2))	-
5.1 (Silicon- IS 228(Part 8))	-
5.1 (Nitrogen-IS 228(P-19))	-
5.1 (Copper- IS 228(P-15))	-

-
Chem: Excluding C(<0.05), Mo, Ti, Al, B, V Mech: excluding Critical Dimensions

14819

BIS, Northern Regional Laboratory (NRL)

None

IS 1166 (1986)

Specification for condensed milk, partly skimmed and skimmed condensed milk (Second Revision)

10430 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Table 1 (i) (Apendix B) (Total milk solids - Partly Skimmed Condenied Milk)	-
Table 1 (ii) (IS : 11762- 1986) (Fat -Condensed Milk)	-
Table 1 (iii) (Apendix C) (Sucrose -Condensed Milk)	-
Table 1 (vi) (Apendix D) (Titratable acidity (as lactic acid) -Condensed Milk)	-
Table 1 (v) (Apendix E) (Accelerated starage test -Condensed Milk)	-
Cl.5.1.10.1 (Salmonella IS 5887 Part 3)	-
Cl.5.1.10.1 (Shigella IS 5887 Part 7)	-
Cl.5.1.10.2 (Coliform Count IS 5401 Part 1)	-
Cl.5.1.10.3 (Yeast and Mould Count IS 5403)	-
Cl.5.1.10.4 (Coagulase positive Staphylococcus aureus IS 5887 Part 2)	-
Cl.5.1.10.5 (Escherichia coli IS 5887 Part 1)	-

-
Microbiological testing is complete. Excluding Except Lactate Crystals

14820

BIS, Central Laboratory (CL)

None

IS 12146 (1987)

Specification for carbon manganese steel forgings for pressure vessels

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 5.1 & Table 1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 & Table 1 (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 & Table 1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 & Table 1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 & Table 1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number