BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15634 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

14851

BIS, Central Laboratory (CL)

None

IS 2185 : Part 1 (2005)

Concrete masonry units - Specification: Part 1 hollow and solid concrete blocks (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
9.2 & 4.2 (PHYSICAL REQUIREMENTS-Nominal Dimensions 1.Length 2.Hight 3. Width)	-
9.2 & 4.2.3 (Nominal Dimensions-variation in the length of units )	-
9.2 & 4.2.3 (Nominal Dimensions -variation in height and width of units )	-
9.5 (PHYSICAL REQUIREMENTS -Water Absorption)	-

-
-

14852

BIS, Northern Regional Laboratory (NRL)

None

IS 8329 (2000)

Centrifugally cast (Spun) ductile iron pressure pipes for water, gas and sewage - Specification (Third Revision)

Rs.7800/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 10 (Hardness & Tensile Test)	-
Cl 11 (Hydrostatic Test)	-
Cl 13 (Length, Diameter, Wall Thickness & Ovality)	-

-
Excluding HST for size above 300 mm

14853

BIS, Northern Regional Laboratory (NRL)

None

IS 6240 (2008)

Hot rolled steel plate (Up To 6 Mm) sheet and strip for the manufacture of low pressure liquefiable gas cylinders (Fourth Revision)

9710 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 7 (UTM)	-
Cl 8 (Press)	-
Cl 9 (Strainage Embrittlement)	-
Cl 13 (Length, Width & Thickness)	-
6.1 (Carbon %)	-
6.1 (Manganese %)	-
6.1 (Phosphorus %)	-
6.1 (Sulphur %)	-
6.1 (Silicon %)	-
6.1 (Nitrogen%)	-

-
Excluding, Cupping Test, Microalloying elements

14854

BIS, Central Laboratory (CL)

None

IS 2185 : Part 3 (1984)

Concrete Masonry Units Part 3 Autoclaved Cellular Aerated Concrete Blocks

8200.00 (complete testing charges) View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8.2 (Physical requirments-Dimensions-Length)	-
8.2 (Physical requirments-Dimensions-Height)	-
8.2 (Physical requirments-Dimensions-Width)	-

-
Excluding -; Drying shrinkage,Thermal condictivity,Compressive Strength

14855

BIS, Western Regional Laboratory (WRL)

None

IS 7224 (2006)

Iodized salt, vacuum evaporated iodized salt and refined iodized salt - Specification (Second Revision)

Rs7440/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 4.2 (Particle Size)	-
Clause 4.3 Table 1 (Moisture content)	-
Clause 4.3 Table 1 (water insoluble matter)	-
Clause 4.3 Table 1 (Calcium (as Ca))	-
Clause 4.3 Table 1 (Magnesium (as mg))	-
Clause 4.3 Table 1 (Sulphate (as SO4 ),)	-
Clause 4.3 Table 1 (Iodine content, a) Manufacturers Level )	-
Clause 4.3 Table 1 (Alkalinity (as Na2CO3),)	-
Clause 4.3 Table 1 (Arsenic(as As))	-
Clause 4.3 Table 1 (Iron(as Fe))	-
Clause 4.3 Table 1 (Chloride Content(as Nacl))	-
Clause 4.3 Table 1 (Matter soluble in water other than sodium chloride)	-
Clause 4.3 Table 1 (Lead as (Pb))	-
4.4 (Anticaking agents (Potassium Ferrocyanide))	-
Clause 4.3 Table 1 (b) Distribution channel including retailer)	-

-
Test facility not available for the following: 1. Pb

14856

BIS, Central Laboratory (CL)

None

IS 2098 (1997)

Asbestos cement building boards - Specification (First Revision)

3300 (Complete testing charges) View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1 Table -1 ( TOLERANCES - 1.Tolerance on Length & Width)	-
7.2 Table -1 (2.Tolerance on Thickness )	-
8.3 Table 1 & 7.1 (TESTS-Measurement of Thickness )	-
8.4 (TESTS-Water Absorption Test )	-

-
-

14857

BIS, Southern Regional Laboratory (SRL)

None

IS 2385 (1977)

Specification for hot - Rolled mild steel sheet and strip in coil form for cold - Reduced tinplate and cold - Reduced blackplate (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 (Freedom from defects)	-
8 (Dimensions and Tolerances)	-

-
" Mech- 2 x 500 mm Excluding except Chemical tests

14858

BIS, Eastern Regional Laboratory (ERL)

None

IS 8052 (2006)

Steel ingots,billets and blooms for the production of springs, rivets and screws for general engineering applications - Specification (Second Revision)

All grades except for the tests mentioned in remarks

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause No. 6.1 Table No. 1 (Carbon)	-
Clause No. 6.1 Table No. 1 (Silicon)	-
Clause No. 6.1 Table No. 1 (Manganese)	-
Clause No. 6.1 Table No. 1 (Sulphur)	-
Clause No. 6.1 Table No. 1 (Phosphorus)	-
Clause No. 6.1 Table No. 1 (Chromium)	-
Clause No. 6.1 Table No. 1 (Molybdenum)	-
8 (Freedom from defects , IS 8052)	-
10,11 (Dimensions & Tolerances)	-
9,a) (Macro examination - IS 11371)	-
9,d) (Inclusion content - IS 4163)	-
6.1 Table 1 (Vanadium- IS 228 or any other established instrumental /Chemical method)	-

-
Remarks: Grade designation to be declared

14859

BIS, Eastern Regional Laboratory (ERL)

None

IS 6909 (1990)

Supersulphated cement ? specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (Insoluble residue - Cl 4.10 of IS 4032:1985)	-
5.1 (Magnesium Oxide - Cl 4.8 of IS 4032:1985)	-
5.1 (Sulphuric anhydride - Cl 4.9 of IS 4032:1985)	-
5.1 (Sulphide sulphur - Cl 6.12 of IS 4032:1985)	-
6.1 (Fineness 4031 Part 2)	-
6.2 (Soundness (cold expansion) by Le Chatelier- 4031 Part 3)	-
6.3 a) (Setting Time Initial- 4031 Part 5)	-
6.3 b) (Setting Time Final- 4031 Part 5)	-
6.4 a) (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-
6.4 b) (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-
6.4 c) (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-
5.1 (Chloride content)	-
5.1 (Insoluble residue - Cl 4.10 of IS 4032:1985)	-
5.1 (Magnesium Oxide - Cl 4.8 of IS 4032:1985)	-
5.1 (Sulphuric anhydride - Cl 4.9 of IS 4032:1985)	-
5.1 (Sulphide sulphur - Cl 6.12 of IS 4032:1985)	-
6.5 (Transverse Strength - IS 4031 Part 8 (Optional))	-

-
mech- 8 kg, Chem: 1kg Excluding except transverse test(Optional)

14860

BIS, Southern Regional Laboratory (SRL)

None

IS 7098 : Part 1 (1988)

Specification for crosslinked polyethylene insulated pvc sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision)

26250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 (CONDUCTOR: MATERIALS)	-
4 (INSULATION : MATERIALS)	-
5.1 (FILLER AND INNER SHEATH)	-
5.2 (FILLER AND INNER SHEATH)	-
6 (ARMOURING)	-
7 (OUTER SHEATH)	-
8.1 (CONDUCTOR: CONSTRUCTION)	-
8.2 (PROTECTIVE BARRIER)	-
8.3 (SIZE OF NEUTRAL CONDUCTOR)	-
9.1 (Insulation Applied by extrusicn)	-
9.2 (Thickness of Insulation - Average)	-
9.3 (Thickness of Insulation - Minimum)	-
9.4 (Application of Insulation)	-
10.1 (Core Identification)	-
10.2 (Core Identification- Neutral)	-
10.3 (Core Identification by number )	-
10.4 (Core Identification by number - Neutral )	-
11 (LAVING UP OF CORES)	-
12.1 & 12.2 (Inner sheath : Application)	-
12.3 (Thickness of Inner Sheath)	-
13.1 (Armouring: Application)	-
13.1.2 (Armouring: Coverage )	-
13.1.3 (Armouring: Direction of Lay )	-
13.2 (Type of armour )	-
13.3 (Armouring : Dimensions -Wire Diameter)	-
13.3 (Armouring : Dimensions -Formed wire )	-
13.4 (Armour: Joint)	-
13.5 (Armouring : Resistance Test)	-
13.6 a) (ARMOURING: Tensile Strength)	-
13.6 b) (ARMOURING: Elongation )	-
13.6 c) (ARMOURING: Torsion Test (For round wire ) )	-
13.6 d) (ARMOURING: Winding Test(For formed wire))	-
13.6 e) (ARMOURING: Uniformity of zinc coating)	-
13.6 f) (ARMOURING: Mass of zinc coating )	-
13.6 g) (ARMOURING: Resistivity)	-
14.1 (Outer Sheath : Application)	-
14.2 (Colour of outer sheath)	-
14.3 (Thickness of outer sheath - AVERAGE)	-
14.3 (Thickness of outer sheath - minimum)	-
15.1 a) i) (Annealing Test ( For copper wire ) )	-
15.1 a) ii) (Tensile test (for aluminium) - Before stranding )	-
15.1 a) ii) (Tensile test (for aluminium) - After stranding )	-
15.1 a) iii) (Wrapping test (for aluminium))	-
15.1 a) iv) (Resistance test - Main conductor)	-
15.1 a) iv) (Resistance test - Neutral conductor)	-
15.1 d) i) (Phyaical tests for insulation : Tensile Test)	-
15.1 d) i) (Phyaical tests for insulation : Elongation)	-
15.1 d) ii) (Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-
15.1 d) ii) (Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-
15.1 d) iii) (Phyaical tests for insulation : Hot set )	-
15.1 d) iii) (Phyaical tests for insulation : Permanent set )	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage )	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage - Crack observed )	-
15.1 d) v) (Insulation: Waterabsorption(gravimetric))	-
15.1 e) i) (Physical tests for outer sheath : Tensile stregth)	-
15.1 e) i) (Physical tests for outer sheath : Elongation)	-
15.1 e) i) (Physical tests for outer sheath : Tensile stregth)	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation )	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-
15.1 e) iii) (Sheath: Loss of mass in air oven)	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage )	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage - Crack observed )	-
15.1 e) v) (Sheath : Hot deformation)	-
15.1 e) vi) (Sheath : Heat shock test)	-
15.1 e) vii) (Sheath : Thermalstability)	-
15.1 f) (INSULATION RESISTANCE TEST : Volume resistivity )	-
16.2 (HIGH VOLTAGE TEST )	-
16.3 (FLAMMABILITY TEST : Period of Burning )	-
16.3 (FLAMMABILITY TEST : Unaffected length )	-
17.1 (Manufacturer'. identification)	-
17.2 (cable Indentification )	-
17.3 (cable Code )	-

-
15m Excluding Except C1 & C2 Category, Cu Purity Test

14861

BIS, Central Laboratory (CL)

None

IS 3832 (2005)

Hand - Operated chain pulley block - Specification (Third Revision)

Please see remarks. View breakup
Testing charges per man-hour are Rs. 300.00. Hence complete testing charges for the product are :Rs. 6300.00 plus the testing charges as per the relevant ISS referred

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 4.2 (Classification)	-
Cl 5.1 (Frame)	-
Cl 5.3 (Load brake)	-
Cl 5.4 (Pawls)	-
Cl 5.6 (Lubrication)	-
Cl 5.7 (Suspension Fittings)	-
Cl 5.8.1 (Load Chain )	-
Cl 5.10 (Hand Chain)	-
Cl 9.1 (Design Test)	-
Cl 9.3 (Light Load Test )	-
Cl 9.4 (Endurance Type Test )	-

-
Excluding -; i)Light load test (As per CL 9.3.1) ii)Endurance Test(As per CL 9.4.1) iii)Breaking force of load chain and Total Ultimate elongation(As per CL6.4.2 of IS 3077:2001)

14862

BIS, Southern Regional Laboratory (SRL)

None

IS 2255 (1977)

Specification for mild steel wire rod for the manufacture of machine screws (By Cold Heading Process) (Second Revision)

Rs. 600/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7 (Sizes and tolernces)	-
8 (FREEDOM FROM DEFECTS)	-

-
" 3 m Excluding except chemical tests

14863

BIS, Northern Regional Laboratory (NRL)

None

IS 814 (2004)

Covered electrodes for manual metal arc welding of carbon and carbon manganese steel - Specification (Sixth Revision)

Rs. 17500/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1.1 (Diameter of Core Wire)	-
7.1.2 (Length of Electrodes)	-
7.2.1 (Contact End)	-
7.2.2 (Arc striking End)	-
7.3 (Concentricity of Flux covering with core wire)	-
9.1.2 Table 6 (Ultimate Tensile Strength-Annex F)	-
9.1.2 Table 6 ( Yield Stress -Annex F)	-
9.1.2 Table 6 (Percentage Elongation on Gauge Length-Annex F)	-
9.2 (Butt Weld Bend Test-IS 1599)	-
6 & 8.2 (Carbon- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-
6 & 8.2 (Sulphur- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-
6 & 8.2 (Silicon- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-
6 & 8.2 (Manganese- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-
6 & 8.2 (Phosphorous- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-
6 & 8.2 (Copper- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-
6 & 8.2 (Vanadium- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-
6 & 8.2 (Titanium- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-
6 & 8.2 (Alumiminium- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-
6 & 8.2 (Cr+Ni+Mo - Relevant Parts of IS 228 or any other established instrumental/chemical method)	-
6 & 8.2 (Chromium- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-
6 & 8.2 (Nickel- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-
6 & 8.2 (Molybdenum- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-
6 & 8.2 (Mn+Ni+Cr+Mo+V - Relevant Parts of IS 228 or any other established instrumental/chemical method)	-

-
Radiographic test, increased metal recovery, diffusible hydrogen evaluation and For tensile and bend test prepared test pieces are required. Complete testing facility for Cl. 6 is available. Test Facility as per Cl. 8.2 is not available

14864

BIS, Northern Regional Laboratory (NRL)

None

IS 2061 (1995)

Bicycle - Front forks - Specification (First Revision)

Rs. 2727/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8 (MARKING)	-
3 (Material)	-
4 (Dimensions)	-
5 (. Manufacturer&Finish)	-
7.1.1 ( i) Load test )	-
7.1.2 (ii) Expansion Tes )	-
7.1.3 (iii) Tests for Finish)	-
7.1.4 (iv) Impact Test)	-
7.1.3 (iii) Tests for Finish)	-

-
Mechanical: Test facility is complete, Chemical: Excluding Microalloying elements

14865

BIS, Western Regional Laboratory (WRL)

None

IS 2062 (2011)

Hot rolled medium and high tensile structural steel - Specification (Seventh Revision)

3200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 18 (Weight)	-
Cl 15 (Length, Width & Thickness)	-
Cl 12 (Sudden Load Applied)	-
Cl 11.3 (Press)	-
Cl. 10.3 (Cl. 10.3 (Tensile Strength))	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650) (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650) (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650) (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650) (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650) (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
10 (Yield Stress-IS:1608(P1)-22)	-
10 (Elongation on SoA 5.65mm GL)	-

-
Test facilities are not available for the following: 1. Micro-alloying elements, Cu, Al, Nitrogen 2. Y grove Crackability Test in Structural Steel

14866

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 9825 (2003)

Chlorine tablets - Specification (Second Revision)

Rs.4330/ View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.4.2 (Description)	-
Cl.4.3 (Size (Mass of tablet))	-
Cl.4.3 (Available Chlorine (Annex A))	-
Cl.4.4 (Moisture (Annex B))	-
Cl.4.4 (Shelf Life (Annex A))	-

-
Complete for chemical section.

14867

BIS, Eastern Regional Laboratory (ERL)

None

IS 1660 (2009)

Wrought aluminium utensils - Specification (First Revision)

Rs 6760/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
0.5 (Fabrication)	-
6.1 & Table 1 ( i) Name of Utensil )	-
6.1 & Table 1 (ii) Shape of Utensil)	-
6.1 & Table 1 (Inside dia, Φ D mm Not declared )	-
6.1 & Table 1 (Outside dia Ф NA)	-
6.1 & Table 1 (Height NA)	-
6.1 & Table 1 (Capacity, l NA)	-
6.1 ( Minimum sheet thickness for nominal size )	-
7.1 (HANDLES ,When fitted shall be of aluminium, stainless steel or of other suitable fire resistance material These shall be fastened to the utensils by tightly drawn aluminium or stainless steel rivets, by welding, by screwing to cast bosses or by riveting between flange at the end of the handles. Handles shall be so shaped and positioned to facilitate the carrying and handling of the utensils in normal use )	-
7.2 (Handles shall be sufficiently strong to support a mass in the utensils equivalent to three times the mass of the water capacity of the utensils in the position of normal use without visible permanent deformation of the handle or utensil)	-
8.1 (The utensils shall be clean reasonably free from distortion, dents, wrinkles, wavy surface, burrs, scratches, pitting and deep tool marks and other surface defects)	-
8.2 (The design of the utensils shall be such that it is easy to clean and prevent accumulation of dirt)	-
8.4.1.2 ( Finish of the coating: The coating shall be smooth continuous and uniform in appearance, and shall be adherent. It shall be free from powdery areas, loose films and discontinuities, such as breaks and scratches. The size and number of contact marks shall be minimum consistent with good practice.)	-
8.4.2 (A coating of thickness 25 to 100 microns is generally required)	-
8.4.3 (Abrasion Resistance When the coating surface is rubbed two or three times with emery paper with emery conforming to grit number 180 using medium finger pressure, it shall not abrade the surface but shall skid over the surface showing not more than a trace of whitening of the surface)	-
8.4.4 (The colour of the hard anodic coating varies depending upon the alloy, thickness of the coating and electrolye. Normally the colour may vary from dark grey (almost black) to light grey. )	-
8.4.5 (When the coated surface is rubbed two or three times with fine emery paper grit number 180 using medium finger pressure, cloth or paper shall not abrade the surface. A faint trace of whitening on the cloth or paper is permissible)	-
9 (The manufacturer shall provide full instructions for use and cleaning for coated or hard anodized utensils)	-
10 (Each vessel shall be legibly and indelibly stamped on the outside surface or handle with the manufacturer’s name or registered trade-mark, size and thickness or class. )	-
( Clauses 4, 4.1, 4.2 and 4.3) (Carbon of IS 6911)	-
( Clauses 4, 4.1, 4.2 and 4.3) (Silicon of IS 6911)	-
( Clauses 4, 4.1, 4.2 and 4.3) (Silicon of IS 737)	-
( Clauses 4, 4.1, 4.2 and 4.3) (Silicon of IS 21)	-
( Clauses 4, 4.1, 4.2 and 4.3) (Phosphorous of IS 6911)	-
( Clauses 4, 4.1, 4.2 and 4.3) (Sulphor of IS 6911)	-
( Clauses 4, 4.1, 4.2 and 4.3) (Manganese of IS 6911)	-
( Clauses 4, 4.1, 4.2 and 4.3) (Manganese of IS 737)	-
( Clauses 4, 4.1, 4.2 and 4.3) (Magnesium of IS 21)	-
( Clauses 4, 4.1, 4.2 and 4.3) (Nickel of IS 6911)	-
( Clauses 4, 4.1, 4.2 and 4.3) (Chromium of IS 6911)	-
( Clauses 4, 4.1, 4.2 and 4.3) (Chromium of IS 737)	-
( Clauses 4, 4.1, 4.2 and 4.3) (Chromium of IS 21)	-
( Clauses 4, 4.1, 4.2 and 4.3) (Molybdenum of IS 6911)	-
( Clauses 4, 4.1, 4.2 and 4.3) (Nitrogen of IS 6911)	-

-
Facility not available for 1) Non stick plastic coating conforming to IS 9730[IS 9730-Thickness(Cl. 4.3), Non stick quality(Cl. 4.4), Adhesion(Cl. 4.6) - Cross hatch test] ; 2) Performance test(Cl. 8.6.1),

14868

BIS, Eastern Regional Laboratory (ERL)

None

IS 6902 (1973)

Specification for steel wire for spokes

For all sizes

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 4.1 (Carbon- IS 228)	-
Cl. 4.1 (Manganese- IS 228.)	-
Cl. 4.1 (Sulphur- IS 228.)	-
Cl. 4.1 (Phosphorus- IS 228.)	-
5.1 ( Tensile strength )	-
6.0 ( Bend Test )	-
7.0 (Freedom from defects )	-
8.0 (Wire diameter & Tolerances)	-
8 (Wire diameter & Tolerances)	-
5.1 ( Tensile strength )	-
6 ( Bend Test )	-
7 (Freedom from defects )	-

-
3 m + 100 gm drillings

14869

BIS, Northern Regional Laboratory (NRL)

None

IS 7887 (1992)

Mild steel wire rod for general engineering purposes - Specification (First Revision)

Rs.7200/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 (Workmanship)	-
Cl 9 (Nominal Diameter & Out Of Shape)	-
6.1 (Carbon %)	-
6.1 (Manganese %)	-
6.1 (Phosphorus %)	-
6.1 (Sulphur %)	-
6.1 (Silicon %)	-

-
Mechanical-Complete Excluding Microalloying Elements, Copper

14870

BIS, Southern Regional Laboratory (SRL)

None

IS 210 (2009)

Grey iron castings - Specification (First Revision)

Rs.2700.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1 (WORKMANSHIP AND FINISH)	-
10.1 (FREEDOM FROM DEFECTS)	-
13 (SIZE OF TEST BARS-Diameter)	-
13 (SIZE OF TEST BARS-Length)	-
15, Table 3 (TENSIL.E TEST- IS 1608 Part1 )	-
16, Table 3 (Hardness Test)	-
18 (HYDROSTATIC TEST)	-
17,Annex B (TRANSVERSE TEST)	-

-
" 3 TEST BARS Excluding Hardness test

14871

BIS, Northern Regional Laboratory (NRL)

None

IS 13334 : Part 2 (2014)

Skimmed milk powder - Specification: Part 2 extra grade (First Revision)

Rs 10430/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Table 1 (i) (Moisture (IS 116231or 16072))	-
Table 1 (v) (Total ash (on dry basis), Annex B of IS 14433)	-
Table 1 (iv) (Insolubility index (IS 12759))	-
Table 1 (vi) (Titratable acidity (IS 11766))	-
Table 1 (iv) (Insolubility index (IS 12759))	-
Table 1 (vi) (Titratable acidity (IS 11766))	-
Table 1 (iv) (Insolubility index (IS 12759))	-
Table 1 (vi) (Titratable acidity (IS 11766))	-
Table 1 (iii) (Milk fat (IS 117213) or Annex B)	-
Table 1 (viii) (Scorched particles (equivalent to Disc B) (IS 13500))	-
Table 1 (ix) (Bacterial count (IS 5402))	-
Table 1 (x) (Coliform count (IS 5401 - Part 1))	-
Table 1 (xi) (Escherichia coli (IS 5887 - Part 1))	-
Table 1 (xii) (Coagulase positive Staphylococcus aureus (IS 5887 - Part 2))	-
Table 1 (xiii) (Salmonella (IS 5887 - Part 3))	-
Table 1 (xiv)(a) (Spore Count: a) Aerobic (Bacillus cereus) Type M (IS 5887 - Part 6))	-
Table 1 (xiv)(b) (Spore Count: b) Anaerobic (Sulfite reducing Clostridia) Type m (ISO 15213 : 2003))	-
Table 1 (xv) (Listeria monocytogenes (IS 14988 - Part 2 : 2001))	-

-
Microbiological testing is complete. Excluding Lactate Content

14872

BIS, Central Laboratory (CL)

None

IS 1848 : Part 1 (2018)

Writing and printing papers - Specification: Part 1 account book, azure lead, bond, cream laid and cream wove/printing white/printing coloured/printing offset, printing maplitho, printing white super calendered and typewriting types (Fifth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.4.2 (Substance, Ref IS 1763)	-
Cl. 4.4 (Size and tolerance on size)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i (Tensile index, Account book-CD)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i (Tensile index, Account book-MD)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i (One minute cobb test, Account book)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i (Double fold, Account book-CD)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i (Double fold, Account book-MD)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i (Wax pick, Account book)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i (Smoothness(Bendtsen),Account book)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i (Tear index, Account book-CD)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i (Tear index, Account book-MD)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii (Tensile index, Azure laid-CD)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii (Tensile index, Azure laid-MD)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii (Tear index, Typewriting-MD)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i (Smoothness(Bendtsen),Account book)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii (One minute cobb test, Azure laid)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii (Double fold, Azure laid-CD)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i (Double fold, Account book-MD)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii (One minute cobb test, Azure laid)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii (Double fold, Azure laid-CD)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii (Double fold, Azure laid-MD)	-
Cl. 4.5 (pH)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii (Tensile index, Bond-CD)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii (Tensile index, Bond-MD)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii (Tensile index, Bond-CD)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii (Tear index, Bond-CD)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii (Tear index, Bond-MD)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv (Tensile index, Cream laid and cream wove/printing white/printing coloured/printing offset-CD)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv (Tensile index, Cream laid and cream wove/printing white/printing coloured/printing offset-MD)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv (Tear index, Cream laid and cream wove/printing white/printing coloured/printing offset-CD)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii (One minute cobb test, Bond)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi (One minute cobb test, Printing White Super Calendered)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv (Double fold, Cream laid and cream wove/printing white/printing coloured/printing offset-CD)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv (Double fold, Cream laid and cream wove/printing white/printing coloured/printing offset-MD)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii (Tensile index, Typewriting-MD)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv (Wax pick, Cream laid and cream wove/printing white/printing coloured/printing offset)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv (Smoothness bendtsen, Cream laid and cream wove/printing white/printing coloured/printing offset)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv (Tear index, Cream laid and cream wove/printing white/printing coloured/printing offset-CD)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv (Tear index, Cream laid and cream wove/printing white/printing coloured/printing offset-MD)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i (Gloss, Account book)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i (Opacity, Account book)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii (Brightness ISO, Azure laid)	-
Cl.4.3 (Thickness)	-

-
Test facility is not available of the mntioned exclusion paramters; Excluding ISO Brightness, Opacity, Gloss percent;

14873

BIS, Western Regional Laboratory (WRL)

None

IS 7532 (2018)

Soft soap - Specification (First RevisIon)

Total testing charges-Rs 8915/- (except storage test), View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
CL 5 ( 5.1) (The material shall be homogeneous translucent mass of jelly-like texture, free from putrescent, fishy or objectionable odour. It applies to soft soap with potassium or sodium base or a mixture of these bases. It does not apply to soaps for medicinal purposes. It may or may not be suitably perfumed subject to agreement between the purchaser and the supplier. It shall be free from foreign matter and visible impurities)	-
5.2 (5.2 The material shall quickly form a satisfactory lather while in use and shall show no sign of any deterioration on storage in original sealed containers under normal conditions for a period of 12 months.)	-
5.4 (Soft soap is liable to lose moisture on keeping. The results obtained for unsaponified and unsaponifiable matter, total free alkali and free caustic alkali by the specific methods of analysis shall, therefore, be recalculated in relation to the specified minimum total fatty matter by means of the equation: Recalculated result = Minimum specified total fatty matter content Actualresult× Actual total fatty matter conten)	-
Table-1 (i) IS.no 286 (Total Fatty Matter ( Type 1 ))	-
Table1(ii) IS.no 286 CL12 (Unsaponified and Unsaponified matter (Type 2 ))	-
Table-1 (iii) IS.no 286 CL 14 (Rosin acids percent by mass of total fatty matter ( Type 1))	-
Table-1 (iv) IS.no 286 Annex A (Total free alkali ( as K2O ) type 1)	-
Table-1 (v) IS.no 286 CL 6 ( see note ) (Free Caustic alkali ( as K2O) type 1)	-
5.3 (The soap shall not become liquid at 32°C, and no liquid shall separate when the soap is maintained at 0°C, for 24 h.)	-
Table-1 (ii) IS.no 286 CL 12 (Unsaponified and Unsaponified matter (Type 1 ))	-

-
-

14874

BIS, Central Laboratory (CL)

None

IS 2312 (1967)

Specification for propeller type AC ventilating fans (First Revision)

Rs 13800/- with regulator View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
13.1 (Marking)	-
13.1 (a) (Marking)	-
13.1 (b) (Marking)	-
13.1 (c) (Marking)	-
13.1 (d) (Marking)	-
13.1 (e) (Marking)	-
13.1 (f) (Marking)	-
13.1 (g) (Marking)	-
13.1 (h) (Marking)	-
13.1 (j) (Marking)	-
13.2 (Marking)	-
13.4 (Marking)	-
3.1 (Sizes )	-
4.1 (Rated Voltage)	-
5.1 (Rated frequency)	-
6.1 (Design and General Construction)	-
6.3 (Design and General Construction)	-
6.3 (Design and General Construction)	-
6.4 (Design and General Construction)	-
6.5 (Design and General Construction)	-
6.6 (Design and General Construction)	-
6.7 (Design and General Construction)	-
6.9 (Design and General Construction)	-
6.1 (Design and General Construction)	-
6.11 (Design and General Construction)	-
6.12 (Design and General Construction)	-
7.1 (Design and General Construction)	-
8.1 (Design and General Construction)	-
9 (Design and General Construction)	-
10.1 (Starting )	-
11.1 (Interchangeability)	-
14.3.A (Temperature-Rise (for motors))	-
14.3.A (Temperature-Rise (for motors))	-
14.3.A (Temperature-Rise (for motors))	-
14.3.A (Temperature-Rise (for motors))	-
14.3.B (Temperature-Rise (for regulators))	-
14.3.B (Temperature-Rise (for regulators))	-
14.4 (Moistureproofness (for regulators only))	-
14.4 (Moistureproofness (for regulators only))	-
14.1 & 14.6 (Power factor)	-
14.7 (ac leakage)	-
14.8 (High voltage test)	-
14.9 (Insulation-Resistance)	-
14.1 (Earthing continuity)	-
14.11 & 15.1 (Electrical Input)	-
14.12 & 16 (Fan Speed)	-
14.2 & 15.1 (Air Delivery)	-

-
TF Complete only for 300mm, 380mm and 450mm

14875

BIS, Southern Regional Laboratory (SRL)

None

IS 2090 (1983)

Specification for high tensile steel bars used in prestressed concrete (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5 (Tolerances (Size & Mass))	-
6.1, Table 1 (i) 0.2% Proof stress, Mpa)	-
6.1, Table 1 (ii)Ultimate Tensile Strength, Mpa)	-
6.1, Table 1 (iii)Elongation, %)	-

-
" mech - 4 m Excluding except Chemical tests

14876

BIS, Central Laboratory (CL)

None

IS 1322 (1993)

Bitumen Felts for Water Proofing and Damp-proofing

Rs.8300/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.4 & Table 1 (Weight )	-
5.5 (Free from external defects - IS 1322)	-
6 (Dimension-IS 1322)	-
7.1 (Breaking Strength test- IS 13826(Part 1))	-
7.1 (Pliabilitry Test-IS 13826(Part 2))	-
7.1 (Strage Sticking Test-IS 13826(Part 3))	-
7.1 (Pressure Head Test-IS 13826(Part-4 )	-
7.1 (Heat Resistance Test-IS 13826(Part 5))	-
7.1 (Water Absorption Test-IS 13826(Part 6))	-

-
excluding -; Pliability test,Storage sticking,Pressure head test ,Heat resistance

14877

BIS, Eastern Regional Laboratory (ERL)

None

IS 6911 (2017)

Stainless steel plate, sheet and strip - Specification (Second Revision)

For all grades except for the tests mentioned in remarks

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 (Freedom from defects , IS 6911)	-
10.1,Table 4&Table 6 (Tensile Test - IS 1608(Pt -1))	-
10.2,Table 4&Table 5 (Hardness Test- IS 1500(Pt -1),IS 1501 (Pt-1),IS 1586 (Pt -1))	-
10.3 (Bend Test - IS 1599)	-
11,Table 7 (Erichsen cupping test-IS 10175)	-
17 (Dimension and tolerance)	-
Cl. 7.1 & 7.2 Table 1 (Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 7.1 & 7.2 Table 1 (Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 7.1 & 7.2 Table 1 (Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 7.1 & 7.2 Table 1 (Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 7.1 & 7.2 Table 1 (Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 7.1 & 7.2 Table 1 (Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 7.1 & 7.2 Table 1 (Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 7.1 & 7.2 Table 1 (Molybdenum -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 7.1 & 7.2 Table 1 (Copper -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 7.1 & 7.2 Table 1 (Niobium-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 7.1 & 7.2 Table 1 (Titanium-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 7.1 & 7.2 Table 1 (Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.12 (Corrosion Resistance- IS 10461(Part1))	-
Cl.12 (Corrosion Resistance- IS 10461(Part2))	-
Table 1 (Alumium)	-
Table 1, Amendment 2 (Tungstun)	-
Table 1, Amendment 2 (Ta)	-
Table 1, Amendment 2 (Zirconium)	-
Table 1, Amendment 2 (Cobalt)	-

-
Chem- Wire Diameter Should be Greater than 3 mm. Mech- Steel designation and element specified in Cl.7.3 (if applicable) 100 g drillings

14878

BIS, Eastern Regional Laboratory (ERL)

None

IS 6603 (2024)

Stainless Steel Semi-Finished Products, Bars, Wire Rods and Bright Bars â Specification (Second Revision)

All Grades and Conditions

14800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl - 9.1,9.5,13.2 (Thickness or Diameter)	-
Cl-7.1, 7.2 (C)	-
Cl-7.1, 7.2 (Si)	-
Cl-7.1, 7.2 (Mn)	-
Cl-7.1, 7.2 (P)	-
Cl-7.1, 7.2 (S)	-
Cl-7.1, 7.2 (Cr)	-
Cl-7.1, 7.2 (Mo)	-
Cl-7.1, 7.2 (Ni)	-
Cl-7.1, 7.2 (N)	-
Cl-7.1, 7.2 (Ti)	-
Cl-7.1, 7.2 (Cu)	-
Cl-7.1, 7.2 (Nb)	-
Cl-7.1, 7.2 (W)	-
Cl-7.1, 7.2 (V)	-
Cl-7.1, 7.2 (Al)	-
Cl-7.1, 7.2 (Ti: (C + N))	-
Cl-7.1, 7.2 (Boron)	-
cL-7.1, 7.2 (Co)	-

-
Chem- Wire Diameter Should be Greater than 3 mm Mech- Steel designation and element specified in Cl.7.3 (if applicable) to be declared. Prepared sample required for Charpy Impact Test

14879

BIS, Southern Regional Laboratory (SRL)

None

IS 1673 (1984)

Spectfication for mild steel wire, cold heading quality (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 (FREEDOM FROM DEFECTS)	-
8 ( DIMENSIONS AND TOLERANCES)	-

-
" mech - 3 m " Excluding except reverse torsion test, crushing test, tensile properties and chemical tests

14880

BIS, Central Laboratory (CL)

None

IS 9295 (1983)

Specification for steel tubes for idlers for belt conveyors (First Revision)

Rs 5100/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1 (Sulphur- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-
7.1 (Phosphorous- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-
8.1.1 Table 1 (Tensile Strength- IS 1608(1))	-
8.1.1 Table 1 (Yield Strength- IS 1608)	-
8.1.1 Table 1 (Elongation Percent- IS 1608)	-
8.2 (Drift Expansion Test- IS 2335)	-
8.3 (Flattening Test- IS 2328)	-
9.1 Table 2 (Outside Diameter)	-
9.1 Table 2 (Thickness)	-
9.1 Table 2 (Mass)	-
10 (Hardness)	-
13.1.1 (Ovality)	-
13.1.2 (Eccentricity)	-
15.1 (Straightness)	-
16.1 (Length)	-
17.1 (Surface Protection)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number