BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15634 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

14881

BIS, Central Laboratory (CL)

None

IS 9825 (2003)

Chlorine tablets - Specification (Second Revision)

Rs.4330/ View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.4.2 (Description)	-
Cl.4.3 (Available Chlorine (Annex A))	-
Cl.4.4 (Moisture (Annex B))	-
Cl.4.3 (Size (Mass of tablet))	-

-
-

14882

BIS, Central Laboratory (CL)

None

IS 8952 (1995)

Steel ingots, blooms and billets for production of mild steel wire rods for general engineering purposes - Specification (First Revision)

Rs 4840/ View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4,7.1 Table 1 (Carbon- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 Table 1 (Sulphur- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 Table 1 (Phosphorous- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 Table 1 (Manganese- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 Table 1 (Nb+V+Ti - IS 228 or any other established instrumental /Chemical method)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

14883

BIS, Northern Regional Laboratory (NRL)

None

IS 784 (2019)

Prestressed concrete pipes (Including Specials) - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8.4 (Circumferential Prestressing)	-

-
Certification Scheme is being operated on FT basis Excluding only compression strength can be done

14884

BIS, Southern Regional Laboratory (SRL)

None

IS 1783 : Part 1 (2014)

Drums large, fixed ends - Specification: Part 1 grade A drums (Fourth Revision)

Rs.4800/- and testing charges as per relevant referred View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (Capacity)	-
5 (Dimensions (Type 1 C Drums Figure 1))	-
5 (Dimensions (Type 1 D Drums Figure 1))	-
5 (Dimensions (Type 1 D Drums Figure 1))	-
5 (Dimensions (Type 1 D Drums Figure 1))	-
5 (Dimensions (Type 1 D Drums Figure 1))	-
5 (Dimensions (Type 1 C Drums Figure 2))	-
5 (Dimensions (Type 1 C Drums Figure 2))	-
5 (Dimensions (Type 1 C Drums Figure 2))	-
5 (Dimensions (Type 1 C Drums Figure 2))	-
5 (Dimensions (Type 1 D Drums Figure 2))	-
7.1 (Construction)	-
7.2 (Construction)	-
7.3 (Construction)	-
7.4 (Construction)	-
7.5 (Construction)	-
7.6 (Construction)	-
8 (Finish )	-
9.1 (Leakage at air pressure )	-
9.2 (Drop Test)	-
9.3 (Hydraulic Pressure Test)	-

-
-

14885

BIS, Eastern Regional Laboratory (ERL)

None

IS 4454 : Part 1 (2001)

Steel wire for mechanical springs - Specification: Part 1 cold drawn unalloyed steel wire (Third Revision)

For all grades except tests mentioned in remarks

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 (Workmanship)	-
Cl 9 (Diameter & Difference Between Two Reading On Any Two Diameters)	-
Cl 10 (Tensile Test, Wrap Test, Torsion Test, Bend Test, Coiling and Stretching, Cast of wire, Deep Etch Test & Decarburization Test)	-
Cl 10 (Tensile Test, Wrap Test, Torsion Test, Bend Test, Coiling and Stretching, Cast of wire, Deep Etch Test & Decarburization Test)	-
Cl 10 (Tensile Test, Wrap Test, Torsion Test, Bend Test, Coiling and Stretching, Cast of wire, Deep Etch Test & Decarburization Test)	-
7.1, 7.2 (carbon)	-
7.1, 7.2 (sulphur)	-
7.1, 7.2 (phosphorus)	-
7.1, 7.2 (manganese)	-
7.1, 7.2 (silicon )	-
7.1, 7.2 (copper)	-
Cl 10 (Tensile Test, Wrap Test, Torsion Test, Bend Test, Coiling and Stretching, Cast of wire, Deep Etch Test & Decarburization Test)	-
7.1, 7.2 (Vanadium)	-
7.1, 7.2 (nitrogen)	-
7.1, 7.2 (sulphur + phosphorus)	-
7.1, 7.2 (cu + cr+ni)	-

-
Facility not available for Micro alloying elements (V, Nb, Ti)

14886

BIS, Central Laboratory (CL)

None

IS 7454 (1991)

Rehabilitation equipment - Wheelchairs, folding, adult size - Specification (First Revision)

Rs. 8400/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 5.1 Table 1 (Overall Length)	-
Cl. 5.1 Table 1 (Overall Width, Open)	-
Cl. 5.1 Table 1 (Overall Width, Folded)	-
Cl. 5.1 Table 1 (Overall height)	-
Cl. 5.1 Table 1 (Scat height from floor at the fron)	-
Cl. 5.1 Table 1 (Distance between seat and footrest)	-
Cl. 5.1 Table 1 (Armrest height from seat)	-
Cl. 5.1 Table 1 (Scat depth)	-
Cl. 5.1 Table 1 (Clearance of footrest from floor)	-
Cl. 5.1 Table 1 (Clearance of frame from floor)	-
Cl. 5.1 Table 1 (Wheel diameter)	-
Cl. 5.1 Table 1 (Weight of the wheel chair ( basic model ))	-
Cl. 7.1 (Backrest and Seat)	-
Cl.7.2 (Frame)	-
Cl.7.3 (Footrests and Supports)	-
Cl.7.4 ( Armrests)	-
Cl.7.5 (Hand Rims)	-
Cl.7.6 (Brakes)	-
Cl.7.7 (Castors)	-
Cl.7.8 (Wheels)	-
Cl.7.9 (Clothing Guards)	-
Cl.7.10 (Folding Mechanism)	-
Cl.7.11 (Lubrication)	-
Cl. 8 (Finish)	-
Cl. 9.1 (Test for Wheeling)	-
Cl. 9.3 (Load Test)	-
Cl. 9.4 (Test for Folding)	-
Cl. 9.2 (Hazard Running Test)	-
Cl. 5.1 Table 1 (Slope of the seat)	-
Cl. 5.1 Table 1 (Slope of backrest with respect to floor)	-

-
-

14887

BIS, Central Laboratory (CL)

None

IS 8951 (2001)

Steel cast billet ignots, billets and blooms for production of high carbon steel wire rods - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4,7.1 & 7.2 Table 1 (Carbon- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 & 7.2 Table 1 (Manganese- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 & 7.2 Table 1 (Silicon- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 & 7.2 Table 1 (Sulphur- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 & 7.2 Table 1 (Phosphorous- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 & 7.2 Table 1 (Copper- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 & 7.2 Table 1 (Nickel- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 & 7.2 Table 1 (Chromium- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 & 7.2 Table 1 (Nitrogen- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 & 7.2 Table 1 (Cu+Ni+Cr- IS 228 or any other established instrumental /Chemical method)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

14888

BIS, Eastern Regional Laboratory (ERL)

None

IS 7092 : Part 2 (1987)

Specification for aluminium alloy tube for irrigation purposes: Part 2 extruded tube (Second Revision)

For all sizes excepts tests mentioned in remarks

Rs 11230/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.4 (Workmanship & Finish)	-
Cl. 6.3 (Drift Expanding Test ( Expanded Inside Diameter- IS 2335)	-
Cl.6.2 (0.2 percent proof strength- IS 2657)	-
Cl.6.2 (Elongation on 50 mm gauge length- IS 2657)	-
Cl. 6.3 (Drift Expanding Test ( Expanded Inside Diameter- IS 2335)	-
Cl.7.1, Table 2 (Outside Diameter-)	-
Cl.7.1, Table 2 (Roundness or Ovality)	-
Cl.7.1, Table 2 (Wall Thickness)	-
Cl. 7.2 (Length)	-
Cl. 6.1 (Copper- IS 504 or any other established instrumental/ chemical method)	-
Cl. 6.1 (Magnesium- IS 504 or any other established instrumental/ chemical method)	-
Cl. 6.1 (Silicon- IS 504 or any other established instrumental/ chemical method)	-
Cl. 6.1 (Iron- IS 504 or any other established instrumental/ chemical method)	-
Cl. 6.1 (Manganese- IS 504 or any other established instrumental/ chemical method)	-
Cl. 6.1 (Zinc- IS 504 or any other established instrumental/ chemical method)	-
Cl. 6.1 (Chromium- IS 504 or any other established instrumental/ chemical method)	-
Cl. 6.1 (Titanium and/ other grain refining elements)	-
Cl. 6.1 (Aluminium- IS 504 or any other established instrumental/ chemical method)	-

-
Mech: Facility not available for hydrostatic pressure test Chem: Cl.6.1 Al

14889

BIS, Eastern Regional Laboratory (ERL)

None

IS 432 : Part 2 (1982)

Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 2 Hard-Drawn Steel Wire

All sizes

Rs 3900/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 4.1 (Workmanship)	-
Cl 5 & 6 (Diameter)	-
Cl 8.3 (Bending To Both Side At 90°, Then Straight)	-
Clause 3.1.1 (Sulphur)	-
Clause 3.1.1 (Phosphorus)	-
Cl 7 (UTM)	-

-
Complete

14890

BIS, Southern Regional Laboratory (SRL)

None

IS 1566 (1982)

Specification for hard - Drawn steel wire fabric for concrete reinforcement (Second Revision)

Rs 300/- + mat test as per IS:432(Pt 2) View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 (DIMENSIONS)	-
8 (MASS)	-
10 (MECHANICAL PROPERTIES)	-
11.2 (Tensile Test)	-
9.4 (Tolerance on Mass of Fabric)	-
7 (SIZES OF SHEETS ‘OR ROLLS)	-
9.2 (Tolerance on Size of Mesh)	-
9.3 (Tolerance on Size of Sheet)	-
10 (MECHANICAL PROPERTIES)	-

-
" 2 x 500 mm Excluding except bend test and chemical tests

14891

BIS, Northern Regional Laboratory (NRL)

None

IS 7834 : Part 1 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 1 General requirements

Rs.2400/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.4 (Minimum Thickness)	-
Cl. 5.1.1, 5.1.2, Table 1, Fig 1 (Minimum Socket Length)	-
Cl. 5.1.1, 5.1.2, Table 1, Fig 1 (Mean Socket Internal Diameter at Mid-Point of Socket Length)	-
Cl. 5.1.1, 5.1.2, Table 1, Fig 1 (Out-of-roundness tolerances of socket inside diameter)	-
Cl. 6.1 (Stress Relief Test- Appendix A)	-
Cl. 6.4 (Short-Term Hydraulic Test- Appendix D)	-

-
Excluding Performance requirements

14892

BIS, Eastern Regional Laboratory (ERL)

None

IS 432 : Part 1 (1982)

Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild Steel and Medium Tensile Steel Bars

All size and grades

Rs 2100/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5.1 (Workmanship)	-
Cl 6.2 (Weight)	-
Cl 6.2 (Diameter & Ovality)	-
Cl 8.2 (Bend test)	-
Cl 9.3 (Press)	-
Clause -4, 4.1 ( CARBON)	-
Clause -4, 4.1 (MANGANESE)	-
Clause -4, 4.1 (SULPHUR)	-
Clause -4, 4.1 (PHOSPHURS)	-
Clause -4, 4.1 (SILICON)	-
Clause -4, 4.1 (NITROGEN)	-
Cl 6.2 (Diameter & Ovality)	-
Cl 8.1 (ultimate tensile stress, yield stress and percentage elongation)	-
Clause -4, 4.3 (TITANIUM)	-
Clause 4 (Boron)	-
Clause -4, 4.2 (VANADIUM)	-
Clause -4, 4.1 (NIOBIUM)	-
Clause -4, 4.1 (Molybdenum)	-
Clause -4, 4.1 (Chromium)	-
Clause -4, 4.1 (Nickel)	-
Clause -4, 4.1 ( ALUMINIUM)	-
Clause 4 (Carbon Equivalent)	-
Clause 4 (Ni+V+Ti)	-
Clause 4 (Copper)	-

-
-

14893

BIS, Southern Regional Laboratory (SRL)

None

IS 15647 (2006)

Hot rolled steel narrow width strip for welded tubes and pipes

Rs.9900/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 (UTM)	-
Cl 11 (Workmanship)	-
Cl 12 (Length, Width & Thickness)	-
Cl 8 (UTM)	-
Cl 11 (Workmanship)	-
Cl 12 (Length, Width & Thickness)	-
Cl 9 (Press)	-
Cl 13 (Workmanship)	-
Cl 13 (Workmanship)	-

-
" 1.5 m Excluding except Chemical tests

14894

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 5346 (1994)

Synthetic food colour - Preparations and mixtures - Specification (Second Revision)

Rs. 4100/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 4.5 (Total dye Content)	-
Clause 4.6 Table 1 (Water InsoIuble matter,)	-
Clause 4.5 (Total dye Content)	-
Clause 4.6 Table 1 (Lead (as pb) )	-
Clause 4.6 Table 1 (Arsenic(as As))	-
Clause 4.6 Table 1 (Heavy metals)	-
Clause no4.2 (Description)	-

-
Complete for chemical section.

14895

BIS, Southern Regional Laboratory (SRL)

None

IS 15392 (2003)

Aluminium and aluminium alloy bare foil for food packaging - Specification

3371 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 5 Table 1 (PINHOLE COUNT)	-
Clause 6 (FREEDOM FROM DEFECTS)	-
Clause 10 Table 2 (Preferred Thickness)	-
Clause 11 (Average Thickness)	-
Clause 14 (Surface condition)	-
Clause 12 (Dimension and Tolerances: I) Width)	-
Clause 12 (Dimension and Tolerances: 2) Length)	-
7 (Copper- IS 504)	-
7 (Magnesium-IS 504)	-
7 (Silicon- IS 504)	-
7 (Iron-IS 504)	-
7 (Manganese-IS 504)	-
7 (Zinc-IS 504)	-
7 (Titanium- IS 504)	-
7 (Chromium- IS 504)	-
7 (Cu+Si+Fe+Mn+Zn)	-
7 (Cu+Mg+Si+Pe+Mn+Zn)	-

-
" 20 metre coils - 3 Nos Chemical Facility is available Quantity: 5 Pieces of 5cm X 5cm Excluding except tensile test

14896

BIS, Northern Regional Laboratory (NRL)

None

IS 7466 (1994)

Rubber gaskets for pressure cookers - Specifications (First Revison)

Rs.9480/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2 (Workmanship and Finish )	-
3.4-Table 1(ii) (Requirements of Rubber Used for Gaskets-Tensile strength,)	-
3.4-Table 1(iii) (Requirements of Rubber Used for Gaskets-Elongation at break)	-
3.4-Table 1(iv-b) (Requirements of Rubber Used for Gaskets-Tensile strength(After ageing 3 days in Aie-oven Change From Original Value))	-
3.4-Table 1(iv-c) (Requirements of Rubber Used for Gaskets-Elongation at break(After ageing 3 days in Aie-oven Change From Original Value))	-

-
Excluding Hardness, Tensile, Elongation and compression, Test Facility for chemical test is not available

14897

BIS, Southern Regional Laboratory (SRL)

None

IS 1626 : Part 3 (1994)

Asbestos Cement Building types and Pipe Fittings, Gutters and Gutter Fittings and Roofing Fittings - Part 3 : Roofing Fittings

Rs.3300.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 Table-1 (Shapes)	-
5.2 (Dimensions)	-
6.1 (Physical requirements)	-
6.2 (Impermeability test according to the Method 1 described in IS 5913 : 1989)	-
7 (Genaral appearance and finish)	-
10 (Marking)	-

-
" 2 nos

14898

BIS, Eastern Regional Laboratory (ERL)

None

IS 7098 : Part 2 (2011)

Crosslinked polyethylene insulated thermoplastic sheathed cables - Specification: Part 2 for working voltages from 3.3 kV up to and including 33 kV (Second Revision)

Pertial

Rs. 33750/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (CONDUCTOR)	-
4.1.1 (CONDUCTOR)	-
5 (INSULATION)	-
6.1.1 (SCREENING : - Non-metallic — Semiconducting Compound)	-
6.1.2 (SCREENING : - Non-magnetic Metallic Tape for Single Core Unscreened and Unarmoured Cables)	-
7 (FILLERS AND INNER SHEATH)	-
8.1 (ARMOURING)	-
9 (OUTER SHEATH )	-
10.1 (CONDUCTOR)	-
10.2 (CONDUCTOR)	-
11 (CONDUCTOR SCREENING)	-
12.2 (INSULATION : Thickness of Insulation)	-
12.3 (INSULATION : Tolerance on Thickness of Insulation)	-
12.5 (INSULATION : Application of Insulation)	-
13.1 (INSULATION SCREENING)	-
13.2 (INSULATION SCREENING)	-
14.1 (CORE IDENTIFICATION)	-
14.1.1 (CORE IDENTIFICATION)	-
15.1 (LAVING UP OF CORES)	-
16.1 (INNER SHEATH (COMMON COVERING))	-
16.2 (INNER SHEATH (COMMON COVERING))	-
16.3 (INNER SHEATH (COMMON COVERING) : Thickness of Inner Sheath)	-
17.1 (ARMOURING : Application )	-
17.3 (ARMOURING : Dimension )	-
17.4 (ARMOURING : Joints)	-
16.4 (ARMOURING : Resistance)	-
18.1 (OUTER SHEATH)	-
18.2 (OUTER SHEATH: Colour)	-
18.3 (Thicknes of outer sheath : average )	-
18.3 (Thicknes of outer sheath : minimum )	-
19.1 i) a) (Annealing test (for copper))	-
19.1 i) b) (Tensile test (for aluminium) - Before stranding )	-
19.1 i) b) (Tensile test (for aluminium) - After stranding )	-
19.1 i) c) (Wrapping test ( for aluminium))	-
19.1 i) d) (Resistance test - Main conductor )	-
19.1 i) d) (Resistance test - Neutral conductor )	-
19.1 v) b) (Volume resistivity)	-
19.1 vi) a) (Physical tests for outer sheath : Tensile stregth )	-
19.1 vi) a) (Physical tests for outer sheath : Elongation )	-
19.1 vi) b) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-
19.1 vi) b) (Physical tests for outer sheath -Ageing in air oven : Elongation )	-
19.1 vi) b) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-
19.1 vi) b) (Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-
19.1 vi) c) (Phyaical tests for Sheath : Shrinkage )	-
19.1 vi) c) (Phyaical tests for Sheath : Shrinkage - Crack observed )	-
19.1 vi) d) (Sheath : Hot deformation)	-
19.1 vi) e) (Loss of massIn air oven)	-
19.1 vi) f) (Sheath : Heat shock test)	-
19.1 vi) g) (Sheath : Thermalstability)	-
20.8 (Flammability test)	-
21.1 (IDENTIFICATION : Manufacturer's Identification)	-
21.2 (IDENTIFICATION : Cable Identification)	-
21.3 (IDENTIFICATION : Cable Code)	-
12.4 (Eccentricity and Ovality)	-
17.1.2 (ARMOURING )	-
17.1.3 (ARMOURING )	-
17.2 (ARMOURING : Type of armour )	-
19.1 xi) (Insulation resistance test : volume resistivity )	-
20.7 (High voltage test)	-

-
Facility not available for water absorption, partial discharge, impulse withstand, HV test, bending test, heating cycle, dielectric pf test, oxygen index test, flame retardance test

14899

BIS, Eastern Regional Laboratory (ERL)

None

IS 1785 : Part 2 (1983)

Specification for plain hard drawn steel wire for prestressed concrete: Part 2 as - Drawn wire (First Revision)

All size

Rs 3000/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5.1 (Diameter)	-
Cl 5.1.2 (Weight)	-
Cl 6.1 (Tensile Test On UTM)	-
Cl 6.2 (Tensile Test On UTM)	-
Cl 6.3 (Tensile Test On UTM)	-
3.1.1 (PHOSPHORUS)	-
3.1.1 (SULPHUR)	-

-
Mech- Except Proof Stress

14900

BIS, Southern Regional Laboratory (SRL)

None

IS 5651 (1987)

Specification for steels for pneumatic tools (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7 (Hardness )	-
13 (Dimensional Tolerances)	-
13.2..1 (Straightness IS : 3739:1987 )	-

-
" mech - 2 x 500 mm Excluding except macro-structure, Grain size, surface decarburization, non metallic inclusions and Chemical tests

14901

BIS, Eastern Regional Laboratory (ERL)

None

IS 6529 (1996)

Stainless steel blooms, billets and slabs for forging - Specification (First Revision)

All grades except for the elements mentioned in remarks

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1,7.2,7.3 Table 1 (Carbon-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
7.1,7.2,7.3 Table 1 (Silicon-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
7.1,7.2,7.3 Table 1 (Manganese-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
7.1,7.2,7.3 Table 1 (Phosphorous-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
7.1,7.2,7.3 Table 1 (Sulphur-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
7.1,7.2,7.3 Table 1 (Molybdenum-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
7.1,7.2,7.3 Table 1 (Chromium-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
7.1,7.2,7.3 Table 1 (Nickel-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
7.1,7.2,7.3 Table 1 (Niobium-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
7.1,7.2,7.3 Table 1 (Titanium-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
7.1,7.2,7.3 Table 1 (Others(Nitrogen)-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
13 (Corrosion Resistance- IS 10461(Part1))	-
13 (Corrosion Resistance- IS 10461(Part2))	-
6 (Freedom from defects)	-
9 (Hardness)	-
10 (Dimensional Tolerances)	-

-
Chem- Facility not available for Ta, Se, Wire Diameter Should be Greater than 3 mm Steel designation and element specified in Cl.7.3

14902

BIS, Western Regional Laboratory (WRL)

None

IS 14542 (1998)

Partly skimmed milk powder specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Table 1(i) (Moisture Type I (IS 11623))	-
Table 1(ii) (Total solids (milk solids and added salts) Type I (IS 11623))	-
Table 1(iii) (Milk fat, Type I (IS I1722))	-
Table 1(iv) (Insolubility index, a) Roller dried Type I (IS 12759))	-
Table 1(v) (Total ash Type I (Annex B of IS 14433 - Part 1))	-
Table 1(vi) (Titratable acidity (as lactic acid) Type I (IS 11766))	-
Cl 6.4 (Flavour and Taste (IS 10030))	-
Cl 6.6.1 (Bacterial Count (IS 5402))	-
Cl 6.6.2 (Coliform Count ((IS 5402))	-

-
-

14903

BIS, Southern Regional Laboratory (SRL)

None

IS 14652 (1999)

18 percent nickel maraging steel bars and rods - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8.2.1 (i)0.2 percent proof stress, MPa )	-
8.2.1 (ii)Tensile strength, MPa )	-
8.2.1 (iii)Elongation percent)	-
8.2.1 (iv)Reduction in area, percent )	-
8.2.1 (v)Hardness HRC)	-

-
" mech - 2 x 500 mm " Excluding except supplementary requirements (macroetch test and fracture toughness) and Chemical tests

14904

BIS, Southern Regional Laboratory (SRL)

None

IS 5872 (1990)

Cold rolled steel strips (Box Strappings) - Specification

6050 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 6 (UTM)	-
Cl 9 (Workmanship)	-
Cl 10 (Width & Thickness)	-
Cl 11 (Workmanship)	-

-
" 0.5 sq m+100g drill. " Excluding 1..Reverse Bend Test 2.Corrosion resistance ,Chemical facility not available

14905

BIS, Eastern Regional Laboratory (ERL)

None

IS 1875 (1992)

Carbon steel billets, blooms, slabs and bars for forgings - Specification (Fifth Revision)

all class/designations

Rs.5400/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 7 (Workmanship)	-
Cl 8 (Diameter, Ovality & Weight)	-
Cl 9 (UTM & HBW)	-
6.1, 6.2 (carbon)	-
6.1, 6.2 (silicon )	-
6.1, 6.2 (manganese)	-
6.1, 6.2 (sulphur)	-
6.1, 6.2 (phosphorus)	-
6.1, 6.2 (molybdenum)	-
6.1, 6.2 (copper)	-
6.1, 6.2 (cromium)	-
6.1, 6.2 (nickel)	-
6.1, 6.2 (aluminium)	-
12.0 & 12.3 (Grain Size - IS 4748)	-
12.0 & 12.4 (Macrostructure- IS 11371)	-
CL 8.0 (Average dia (08))	-
6.1, 6.2 (boron)	-
6.1, 6.2 (tin)	-
6.1, 6.2 (vanadium)	-
6.1, 6.2 (cr + n + mo)	-

-
Mech- Except Cl 12 Supplementary Requirements (ultrasonic, magnetic particle test) Remarks: Type of killing & killing material, element as per Cl 6.3 ( if applicable) & Class/Designation, cross sectional dimension to be declared.

14906

BIS, Eastern Regional Laboratory (ERL)

None

IS 14494 (2019)

Elastomer insulated flexible cables for use in mines - Specification (First Revision)

All types

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (CONDUCTOR)	-
5 (INSULATION)	-
5.1 (Power Cores)	-
5.2 (Pilot and Earth Cores)	-
6 (SEMI-CONDUCTING COMPOUND)	-
4 (CONDUCTOR)	-
5 (INSULATION)	-
5.1 (Power Cores)	-
5.2 (Pilot and Earth Cores)	-
6 (SEMI-CONDUCTING COMPOUND)	-
7.1 (TAPE : Proofed Tape)	-
7.2 (TAPE : Polyethylene Terephalate (PETP) or Polypropylene Base Tape)	-
7.3 (TAPE )	-
8 (CENTRE)	-
9.1 (FILLERS)	-
9.2 (FILLERS)	-
10 (CRADLE SEPARATOR)	-
11.1 (ARMOUR)	-
11.2 a) (ARMOURING: Tensile Strength)	-
11.2 b) (ARMOURING: Elongation )	-
11.2 c) (ARMOURING: Torsion Test (For round wire ) )	-
11.2 d) (ARMOURING: Uniformity of zinc coating)	-
11.2 e) (ARMOURING: Mass of zinc coating )	-
12.1 (SHEATH : Inner Sheath)	-
12.2 (SHEATH : Outer Sheath)	-
13.1 (REINFORCEMENT MATERIAL : Tape)	-
13.2 (REINFORCEMENT MATERIAL : Cord/Yarns)	-
14.1 (CONSTRUCTION : CONDUCTOR)	-
15 (CONDUCTOR SCREENING)	-
16.1 (INSULATION)	-
16.2 (INSULATION : Thickness of Insulation)	-
16.3 (INSULATION : Tolerance on Insulation Thickness)	-
16.4 (INSULATION : Application of Insulation)	-
17.2 (INSULATION SCREEN)	-
18 (PROTECTIVE SCREEN)	-
20.1 (CORE IDENTIFICATION)	-
20.2 (Colour Scheme for Identification)	-
20.3 (Scheme for Identification by Numbering)	-
21.1 (LAYING UP OF CORES)	-
21.2 (LAYING UP OF CORES)	-
21.4 (LAYING UP OF CORES)	-
22.1 (INNER SHEATH)	-
22.2 (Thickness of Inner Sheath)	-
22.3 (INNER SHEATH)	-
23.1 (ARMOURING)	-
23.2 (ARMOURING)	-
23.4 (ARMOURING)	-
24.1 (OUTER SHEATH)	-
24.2 (Thickness of Outer Sheath)	-
24.3 (Tolerance on Thickness of Outer Sheath)	-
24.4 (OUTER SHEATH)	-
25.1 (CABLE CONSTRUCTION AND DIMENSIONS)	-
27.8 (Flammability Test)	-
28 (IDENTIFICATION)	-
29.1 (PACKING AND MARKING)	-
30 (BIS CERTIFICATION MARKING)	-
27.9 (Water Absorption Test)	-

-
Facility not available for ozone resistance test, dielectric pf test, Water Absorption Test, Hot set Test, Oil Resistance Test, Tear Resistance, Ageing in air bomb, bending Test, Heating cycle and partial discharge Test . Facility for High Voltage test is upto 3.3. kV only. Cable type to be declared.

14907

BIS, Eastern Regional Laboratory (ERL)

None

IS 6392 (2020)

Steel Pipes Flanges — Specification ( First Revision )

Rs 3070/- + View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 Table 1 (Carbon- relevant parts of IS 228 or any other established instrumental/chemical method, )	-
3.1 Table 1 (Silicon- relevant parts of IS 228 or any other established instrumental/chemical method, )	-
3.1 Table 1 (Manganese- relevant parts of IS 228 or any other established instrumental/chemical method, )	-
3.1 Table 1 (Sulphur- relevant parts of IS 228 or any other established instrumental/chemical method, )	-
3.1 Table 1 (Phosphorous- relevant parts of IS 228 or any other established instrumental/chemical method, )	-
3.1 Table 1 (Nickel- relevant parts of IS 228 or any other established instrumental/chemical method, )	-
6.1 (Dimension)	-
14 (Workmanship)	-
3.1 Table 1 (Carbon Equivalent-relevant parts of IS 228 or any other established instrumental/chemical method,)	-
3.1 Table 1 (Copper- relevant parts of IS 228 or any other established instrumental/chemical method, )	-
3.1 Table 1 (Nitrogen Content-relevant parts of IS 228 or any other established instrumental/chemical method,)	-
3.1 Table 1 (Cr+Ni+Mo- relevant parts of IS 228 or any other established instrumental/chemical method, )	-
3.1 Table 1 (Boron- relevant parts of IS 228 or any other established instrumental/chemical method, )	-
3.1 Table 1 (Niobium-relevant parts of IS 228 or any other established instrumental/chemical method,)	-
3.1 Table 1 (Vanadium- relevant parts of IS 228 or any other established instrumental/chemical method, )	-
3.1 Table 1 (Titanium-relevant parts of IS 228 or any other established instrumental/chemical method,)	-
3.1 Table 1 (Nickel- relevant parts of IS 228 or any other established instrumental/chemical method, )	-
3.1 Table 1 (Aluminium- relevant parts of IS 228 or any other established instrumental/chemical method, )	-
3.1 Table 1 (Tin- relevant parts of IS 228 or any other established instrumental/chemical method, )	-

-
Mech-Facility not available for hydraulic test Facility available upto 125 mm bore size. Type/grade/std number for flange material, class designation to be declared.

14908

BIS, Southern Regional Laboratory (SRL)

None

IS 6003 (2010)

Indented Wire For--Prestressed Concrete ”

Rs.4110/- excl. relaxation test View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5.1 (Diameter)	-
Cl 6.1.2 (Weight)	-
Cl 7.1 (Tensile Test On UTM)	-
Cl 7.4 (Tensile Test On UTM)	-

-
" 1mx2 no + 25g Excluding Excl Proof stress, ductility, Elongation after fracture,Reverse Bend Test,and stress relaxation tests. Chem facility not available.i

14909

BIS, Southern Regional Laboratory (SRL)

None

IS 12591 (2018)

Cold - Reduced tinmill products - Electrolytic chromium / chromium oxide - Coated steel (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.4 (Oiling)	-
10.2.1 (Thickness)	-
10.2.2 (Feather edge)	-
10.3 (Width)	-
10.4.2 (Length of sheet)	-
10.5 (Edge camber)	-
10.6 (Out of square)	-
10.7.1 (Edge wave)	-
10.7.2 (Longitudinal &Transverse bow )	-
10.7.3 (Centre fullness)	-
10.7.3 (Centre fullness)	-
10.7.2 (Longitudinal &Transverse bow )	-
11.4 & 11.4.1 (Dimension of joint,Thickness)	-
11.4.2 (Overlap)	-
7.3 , Table 1 (Finish)	-

-
" Mech- 2 x 500 mmm " Excluding except Tensile test, Hardness tests and chemical tests

14910

BIS, Southern Regional Laboratory (SRL)

None

IS 1239 : Part 2 (2011)

Steel tubes, tubulars and other steel fittings - Specification: Part 2 steel pipe fittings (Fifth Revision)

3400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8.1-Table 1 ( DIMENSIONS OF TUBULARS-Pieces )	-
8.1-Table 1 ( DIMENSIONS OF TUBULARS-Pieces-Approximate Standard Length(A) )	-
8.2-Table-2 ( DIMENSIONS OF TUBULARS-Nipples )	-
8.2-Table-2 ( DIMENSIONS OF TUBULARS-Nipples-A )	-
8.2-Table-2 ( DIMENSIONS OF TUBULARS-Nipples-B )	-
8.2-Table-2 ( DIMENSIONS OF TUBULARS-Nipples-C )	-
8.3.1-Table 3 (DIMENSIONS OF TUBULARS-Longscrews (Connectors))	-
8.3.1-Table 3 (DIMENSIONS OF TUBULARS-Longscrews (Connectors)-B)	-
8.3.1-Table 3 (DIMENSIONS OF TUBULARS-Longscrews (Connectors)-C)	-
8.3.2 (DIMENSIONS OF TUBULARS-Longscrews (Connectors))	-
14 (WORKMANSHIP)	-
8.3.1-Table 3 (DIMENSIONS OF TUBULARS-Longscrews (Connectors)-A)	-
8.3.2 (DIMENSIONS OF TUBULARS-Longscrews (Connectors)-The face of the back nut angle)	-
8.4.1 -Table 4 (Bends and springs)	-
8.4.1 -Table 4 (Bends and springs-A)	-
8.4.1 -Table 4 (Bends and springs-B)	-
8.4.1 -Table 4 (Bends and springs-R)	-
8.4.1 -Table 4 (Bends and springs-C)	-
8.4.1 -Table 4 (Bends and springs-D)	-
8.4.1 -Table 4 (Bends and springs-E)	-
8.5-Table 5 ( Return Bends)	-
8.5-Table 5 ( Return Bends-A)	-
8.5-Table 5 ( Return Bends-B)	-
8.6 -Table 6 (Sockets)	-
8.6 -Table 6 (Sockets-A)	-
8.6 -Table 6 (Sockets-B)	-
9 (DIMENSIONS OF STEEL FITTINGS (OTHER THAN TUBULARS))	-
9.1-Table 7 (Dimensions of Screwed Ends of Fittings-D )	-
9.1-Table 7 (Dimensions of Screwed Ends of Fittings-Taper )	-
9.1-Table 8 (Dimensions of Elbows, Tees and Crosses, Equal-A)	-
9.1-Table 9 (Dimensions of Elbows Reducing-A)	-
9.1-Table 9 (Dimensions of Elbows Reducing-B)	-
9.1-Table 10 (Dimensions of Tees, Reducing (on the Branch)-A)	-
9.1-Table 10 (Dimensions of Tees, Reducing (on the Branch)-B)	-
9.1-Table 11 (Dimensions of Tees, Reducing (on the Run and Branch, or on the Run Only)-A)	-
9.1-Table 11 (Dimensions of Tees, Reducing (on the Run and Branch, or on the Run Only)-B)	-
9.1-Table 12 (Dimensions of Tees (Increasing on the Branch)-A)	-
9.1-Table 12 (Dimensions of Tees (Increasing on the Branch)-B)	-
9.1-Table 13 ( Dimensions of Crosses, Reducing-A)	-
9.1-Table 13 ( Dimensions of Crosses, Reducing-B)	-
9.1-Table 14 ( Elbows, Tees and Crosses, Side Outlet, Equal-A)	-
9.1-Table 14 ( Elbows, Tees and Crosses, Side Outlet, Equal-B)	-
9.1-Table 15 ( Dimensions of Elbows, Round, Male and Female, Equal-A)	-
9.1-Table 15 ( Dimensions of Elbows, Round, Male and Female, Equal-B)	-
9.1-Table 16 ( Dimensions of Elbows, Equal, 135°-A)	-
9.1-Table 17 (Dimensions of Y-Pieces, Female, Equal-A)	-
9.1-Table 18 (Dimensions of Socket, Reducing-A)	-
9.1-Table 19 (Dimensions of Caps-A)	-
9.1-Table 19 (Dimensions of Caps-T)	-
9.1-Table 21 (Dimensions of Elbows, Tees and Crosses, Male, Equal-A)	-
9.1-Table 22 (Dimensions of Y-Pieces and Angle Tees, Male, Equal-A )	-
9.1-Table 22 (Dimensions of Y-Pieces and Angle Tees, Male, Equal-B )	-
9.1-Table 23 ( Dimensions of Twin Elbows and Sweep Tees, Male, Equal-A)	-
9.1-Table 23 ( Dimensions of Twin Elbows and Sweep Tees, Male, Equal-B)	-
9.1-Table 24 (Dimensions of Socket Unions-A )	-
9.1-Table 25 (Dimensions of Pipe Unions-A)	-
9.1-Table 26 (Dimensions of Union Bends-A )	-
9.1-Table 26 (Dimensions of Union Bends-B )	-
9.1-Table 27 (Dimensions of Hexagon Bushes-T)	-
9.1-Table 27 (Dimensions of Hexagon Bushes-A)	-
9.1-Table 27 (Dimensions of Hexagon Bushes-B)	-
9.1-Table 28 (Dimensions of Nipples, Hexagon, Equal-T)	-
9.1-Table 28 (Dimensions of Nipples, Hexagon, Equal-A)	-
9.1-Table 28 (Dimensions of Nipples, Hexagon, Equal-C)	-
9.1-Table 28 (Dimensions of Nipples, Hexagon, Equal-B)	-
11.1(a) (Internal hydraulic Pressure Test)	-
11.2.1 ( Drift Expanding Test)	-
14 (WORKMANSHIP)	-
14 (WORKMANSHIP)	-
14 (WORKMANSHIP)	-
7.1 (Chemical Composition - Sulphur - Laddle Analysis IS 228)	-
7.1 (Chemical Composition - Phosphorus - Laddle Analysis IS 228)	-

-
" 3 pcs Chemical Facility is available Quantity: 5 Pieces of 5cm X 5cm Excluding excl air pressure test . Facility for preparation of test specimen not available.

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number