BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15546 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

14911

BIS, Northern Regional Laboratory (NRL)

None

IS 12817 (2013)

Stainless steel butt hinges - Specification (Second Revision)

Rs. 2400/- and testing charges as per referred Iss View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.2, Table 1 to 6 (Length , A -IS 12817)	-
6.2, Table 1 to 6 (Breadth, B-IS 12817)	-
6.2, Table 1 to 6 (Breadth, B1-IS 12817)	-
6.2, Table 1 to 6 (Breadth, B2-IS 12817)	-
6.2, Table 1 to 6 (Thickness of flap, C-IS 12817)	-
6.2, Table 1 to 6 (Dia. of Hinge pin, D-IS 12817 )	-
6.2, Table 1 to 6 (Number of Knuckles- IS 12817 )	-
6.2, Table 1 to 6 (Number of Screw Holes -IS 12817 )	-
6.2, Table 1 to 6 (Holes for Screw Number- IS 12817 )	-
7.1 (General - IS 12817 )	-
7.2 (Knuckles - IS 12817 )	-
7.3 (Pins- IS 12817 )	-
7.4 (Screw Holes- IS 12817 )	-
7.4.2 (Position of screw holes - IS 12817 )	-
7.4.2, Fig 1 (The distance of the screw holes from the end of the flap - IS 12817 )	-
8 (Finish - IS 12817 )	-

-
Test facility is complete, Test facility for chemical is not available.

14912

BIS, Central Laboratory (CL)

None

IS 7226 (1974)

Specification for cold - Rolled medium, high carbon and low alloy steel strip for general engineering purposes

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5 (HARDNESS TEST)	-
6 ( FREEDOM FROM DEFECTS)	-
9.1, Table 3 (i)TOLERANCE ON WIDTH)	-
9.1, Table 4 (ii)TOLERANCE ON THICKNESS)	-
9.2 ( Camber)	-
10 (SURFACE FINISH)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm; excluding Except Tungsten as per table 1;

14913

BIS, Central Laboratory (CL)

None

IS 14550 (1998)

Hexaconazole, EC - Specification

Rs.1025.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2.1 (Description)	-
3.2.2 (Cold Test)	-
3.2.3 (Flash Point (Abel))	-
3.2.4 (Emulsion Stability)	-
3.3.2 (Acidity/Alkalinity)	-

-
excluding Cl. 3.3.1 Hexaconazole Content;

14914

BIS, Western Regional Laboratory (WRL)

None

IS 253 (2014)

Specification for common salt (Fourth Revision)

6690 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause -3 for common salt 3.1 ( 3.1.2 ) Annex-2 (Moisture The material shall contain not more than 6.0 percent by mass of moisture, on as received basis, when tested according to the method given in A-2)	-
Clause-3.1 for dairy salt (3.2.2) (3.2.2 Particle Size 99 percent by mass of the material shall pass completely through 850-micron IS Sieve [see IS 460 (Part I)].)	-
Clause-3.2 for dairy salt (3.2.3) Annex -2 (3.2.3 Moisture The material shall contain not more than 0.5 percent by mass of moisture, on as received basis, when tested according to the methods given in A-2.)	-
Table 1 (i) Annex -4 (Water insoluble matter, common)	-
Table 1 (ii) Annex-5 (Chloride content (as NaCl)common)	-
Table 1 (iii) Annex-6 ( Matter soluble in water, other than sodium chloride, common)	-
Table 1 (iv) (Calcium (as Ca), water soluble, percent by mass, common)	-
Table 1 (v) (Magnesium (as Mg), water soluble, percent by mass, common )	-
Table 1 (vi) (Sulphate as SO2 percent by mass, common)	-
Table 1 (vii) Annex-9 (Alkalinity (as Na2CO3), common)	-
Table 1 (vii) Annex-11 (Alkalinity (as Na2CO3), Dairy)	-
Table 1 (ix) (Iron (as Fe), common)	-
Table 1 (x) Annex-11 (x) Arsenic (as As), common)	-
Table 1 (xi) Annex-12 (Copper (as Cu), common)	-

-
Test facility not available for the following: 1) Pb

14915

BIS, Central Laboratory (CL)

None

IS 16232 (2014)

Iron fortified iodized salt (Double Fortified Salt) - Food grade - Specification

11800 View breakup
For complete test facility

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Description - Iron fortified iodized salt (Double fortified salt) shall be crushed crystalline solid; white or pale pink or light grey in colour, free from contamination with clay and other extraneous adulterants and impurities)	-
3.4 - Table 1 - i (Moisture - Annex A of IS 7224)	-
3.3 (material shall pass through 4.00 mm IS sieve)	-
3.4 - Table 1 - ii (Water insoluble matter, on dry basis - A-4 of IS 253 )	-
3.4 - Table 1 - iii (Chloride content (as NaCl), on dry basis - A-4 of IS 253)	-
3.4 - Table 1 - iv (Matter insoluble in dilute HCl, on dry basis - Annex G)	-
3.4 - Table 1 - vi (Iron content (as Fe) - Annex A)	-
3.4 - Table 1 - vii- a (Iodine content, Manufacturer’s level - Annex B)	-
3.4 - Table 1 - viii - b (pH of 5 percent aqueous solution : For other forms of iron fortification - Annex C)	-
3.4 - Table 1 - ix (Sulphate (as SO4) - A-8 of IS 253)	-
3.4 - Table 1 - x (Magnesium (as Mg), water soluble - A-7 of IS 253)	-
3.4 - Table 1 - xi - b (Phosphorous (as P2O5) - For other forms of iron fortification - Annex D)	-
3.4 - Table 1 - xii (Sodium hexa meta phosphate, on dry basis - Annex E)	-
3.4 - Table 1 - xi - a (Phosphorous (as P2O5) - For iron fortification through encapsulated ferrous fumarate - Annex D)	-
3.4 - Table 1 - v (Matter soluble in water other than sodium chloride, on dry basis - A-6 of IS 253)	-

-
500 gm x 3 excluding 1-Phosphorous (as P2O5), 2-Sodium hexa meta phosphate, 3-Iron;

14916

BIS, Southern Regional Laboratory (SRL)

None

IS 281 (2009)

Mild steel sliding door bolts for use with padlocks - Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (SIZES)	-
6-Table 1 (DIMENSIONS AND TOLERANCES-A)	-
6 (DIMENSIONS AND TOLERANCES-A)	-
6-Table 1 (DIMENSIONS AND TOLERANCES-B)	-
6-Table 1 (DIMENSIONS AND TOLERANCES-T)	-
6-Table 1 (DIMENSIONS AND TOLERANCES-C)	-
6-Table 1 (DIMENSIONS AND TOLERANCES-D)	-
6-Table 1 (DIMENSIONS AND TOLERANCES-E)	-
6-Table 1 (DIMENSIONS AND TOLERANCES-F)	-
6-Table 1 (DIMENSIONS AND TOLERANCES-G)	-
6-Table 1 (DIMENSIONS AND TOLERANCES-H)	-
6-Table 1 (DIMENSIONS AND TOLERANCES-J)	-
6-Table 1 (DIMENSIONS AND TOLERANCES-No. of Rivets on bolts plates)	-
6-Table 1 (DIMENSIONS AND TOLERANCES-No. of Rivets on Socket)	-
6-Table 1 (DIMENSIONS AND TOLERANCES-No. of Screw holes on bolt)	-
6-Table 1 (DIMENSIONS AND TOLERANCES-No. of Screw holes on Staple)	-
6-Table 1 (DIMENSIONS AND TOLERANCES-no. of 8m Sqire Holes for carriage bolts for plate and sockets)	-
6-Table 1 (DIMENSIONS AND TOLERANCES-no. of 8m Sqire Holes for carriage bolts for Staple)	-
7.1 (MANUFACTURE-General)	-
7.1 (MANUFACTURE-General)	-
7.2 (MANUFACTURE-Sliding Door Bolts, Plate Type)	-
7.3 (MANUFACTURE-Sliding Bolts, Clip or Bolt Type)	-
7.2 (MANUFACTURE-Sliding Door Bolts, Plate Type)	-
3 (TYPES)	-
7.3 (MANUFACTURE-Sliding Bolts, Clip or Bolt Type)	-
7.3 (MANUFACTURE-Sliding Bolts, Clip or Bolt Type)	-
7.3 (MANUFACTURE-Sliding Bolts, Clip or Bolt Type)	-
7.2 (MANUFACTURE-Sliding Door Bolts, Plate Type)	-
7.2 (MANUFACTURE-Sliding Door Bolts, Plate Type)	-
7.2 (MANUFACTURE-Sliding Door Bolts, Plate Type)	-

-
" 3 pcs Excluding except cupping, strain ageing test and chemical requirements

14917

BIS, Southern Regional Laboratory (SRL)

None

IS 7887 (1992)

Mild steel wire rod for general engineering purposes - Specification (First Revision)

Rs.7200/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 (Workmanship)	-
Cl 9 (Nominal Diameter & Out Of Shape)	-
6.1 (Carbon %)	-
6.1 (Manganese %)	-
6.1 (Phosphorus %)	-
6.1 (Sulphur %)	-
6.1 (Silicon %)	-
6.1 ( Aluminium %)	-
Table 1 Note 3 (Copper)	-
Amendment 1 (Niobium)	-
Amendment 1 (Vanadium)	-
Amendment 1 (Titanium)	-
Amendment 1 (Micro Alloying Element (Nb+V+Ti))	-

-
" 1.5 m + 25 g Chemical Facility is available Quantity: 5 Pieces of 5cm X 5cm Excluding

14918

BIS, Central Laboratory (CL)

None

IS 15160 (2002)

Pretilachlor emulsifiable concentrate - specification

Rs.2450.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2.1 (Description)	-
3.2.2 (Cold Test)	-
3.2.3 (Flash Point (Abel))	-
3.2.4 (Emulsion Stability)	-
3.3.1 (Pretilachlor content)	-
3.3.2 (Acidity)	-

-
-

14919

BIS, Central Laboratory (CL)

None

IS 10325 (2000)

Square tins - 15 kg/litre for ghee, vanaspati, edible oils and bakery shortenings - Specification (Second Revision)

3700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Dimensions and Tolerances)	-
4.1 (Dimensions and Tolerances)	-
4.1 (Dimensions and Tolerances)	-
4.2.2 (Handle)	-
4.3.1 (Manufacture)	-
4.3.2 (Manufacture)	-
4.3.3 (Manufacture)	-
4.3.4 (Manufacture)	-
4.3.5 (Handle)	-
4.3.5 (Handle)	-
4.3.5 (Handle)	-
4.3.5 (Handle)	-
5.1 (Air-Pressure Test)	-
5.2 (Handle Pull Test)	-
5.3 (Hydraulic Pressure Test)	-
4.2.2 (Handle)	-

-
"Test facility for base metal and tin coating as per IS 1327. Sample size 5x5 cmm thickness > 3mm. Test facility complete for mechanical; " excluding Test facility for base metal and tin coating as per IS 1327 available. for material thickness < 0.8 mm only C & S can be tested.;

14920

BIS, Central Laboratory (CL)

None

IS 8737 (2017)

Valve fittings for use with liquefied petroleum gas (LPG) cylinders for more than 5 litre water capacity - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.3.1a (Tensile Strength-IS 1608)	-
4.3.1b (Elongation-IS 1608)	-
4.4 (Izod impact strength-IS 1598)	-
5.1.1a Fig 1,2 (SCREW THREADS ON THE VALVE STEM- Type 1 Threads-IS 15894)	-
7.1 (Design Requirements)	-
7.3 (Design Requirements)	-
7.4 (Design Requirements)	-
7.5 (Design Requirements)	-
7.6 (Design Requirements)	-
7.8ai Annex D of IS 9798 (All rubber and other moulded parts coming in contact with LPG in the construction of the valve shall be compatible with LPG, when tested according to Annex D of IS 9798)	-
7.8bi Annex H of IS 9798. (All rubber and other moulded parts shall be suitable for extreme climatic conditions in which the valve is likely to be used, the range of temperature being -20°C to + 65°C. The method of test shall be according to Annex H of IS 9798.)	-
4.6.2,4.6.2.1,4.6.2.2a (Moulded parts (plastics, etc) shall be subjected to immersion test (resistance to hydrocarbons)(Cl.4.6.2.1) Increase in mass :)	-
7.10 (The minimum finished wall thickness at any portion of the valve shall not be less than 2.5 mm)	-
8.1 (Stress Corrosion Test for Copper Alloy As per IS 2305)	-
8.2 (Hydrostatic Test)	-
8.3.1 (Pneumatic Test: Tightness of Joint Packing (in Valve Outlet) and Valve Spindle)	-
8.3.2 (Pneumatic Test: Tightness of Valve Spindle and Valve Housing)	-
8.3.3 (Pneumatic Test: Tightness of Joint Packing and Housing)	-
9.2a (Cycle Test)	-
9.2bi (After the cycle test, the valve shall besubjectedto the pneumatic test given in 8.3 and shall performsatisfactorily:- lPneumatic Test ,after cycle test: Tightness of Joint Packing (in Valve Outlet) and Valve Spindle)	-
9.2bii (Pneumatic Test ,after cycle test: Tightness of Valve Spindle and Valve Housing)	-
9.2biii (Pneumatic Test ,after cycle test: Tightness of Joint Packing and Housing)	-
9.3 (Operation Test)	-
9.4 (Valve Fitting Testing Torque :)	-
9.5a Table 3,Fig. 8 (Impact Test)	-
9.5bi (After the Impact test, the valve shall satisfy Pneumatic test as perCl.8.3:- lPneumatic Test ,after cycle test: Tightness of Joint Packing (in Valve Outlet) and Valve Spindle)	-
9.5bii (Pneumatic Test ,after cycle test: Tightness of Valve Spindle and Valve Housing)	-
9.5biii (Pneumatic Test ,after cycle test: Tightness of Joint Packing and Housing)	-
4.3.1a (Tensile Strength-IS 1608)	-
6.2 (VALVE OUTLET CONNECTIONS: Spring loaded self-closing Valve)	-
4.2.1Sl.No.i (Copper)	-
4.2.1Sl.No.ii (Lead)	-
4.2.1Sl.No.iii (Iron)	-
4.2.1Sl.No.iv (Manganese)	-
4.2.1Sl.No.vi (Zinc)	-
4.2.1Sl.No.v (others(inclusive of iron))	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm; excluding -; (Cl 4.6.1.1)-Ozone test (Resistance to ozone cracking)

14921

BIS, Central Laboratory (CL)

None

IS 5986 (2017)

Hot rolled steel sheet, plate and strip for forming and flanging purposes - Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 (UTM)	-
Cl 9 (Press)	-
Cl 13 (Workmanship)	-
Cl 15 (Length, Width & Thickness)	-
7.1 (Carbon %)	-
7.1 (Sulphur %)	-
7.1 (Phosphorus %)	-
7.1 (Manganese %)	-
7.1 (Silicon %)	-
7.1 ( Aluminium %)	-
7.1 ( Nitrogen%)	-
7.1 ( Copper %)	-
7.1 (V)	-
7.1 ( Ti)	-
7.1 (Cr)	-
7.1 (Mo)	-
7.1 ( Nb)	-
Cl. 7 (Micro Alloy)	-
Cl. 7 (CE)	-
Cl. 7 (Boron)	-
Cl. 7 (Ti+Nb+V+B)	-
Cl. 7 (Cr+Ni+Mo)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm; excluding -; i)Hole Expansion Ratio Test(CL 11)

14922

BIS, Central Laboratory (CL)

None

IS 15182 (2002)

Propiconazole EC - Specification

Rs.2450.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2.1 (Description)	-
3.2.2 (Cold Test)	-
3.2.3 (Flash Point (Abel))	-
3.2.4 (Emulsion Stability)	-
3.3.1 (Pretilachlor content)	-
3.3.2 (Acidity)	-

-
excluding Cl. 3.3.1 Propiconazole Content;

14923

BIS, Central Laboratory (CL)

None

IS 14158 (1994)

Cyfluthrin WP - Specification

Rs.5600/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2 (Description)	-
3.3 Table 1 i (Cyfluthrin content )	-
3.3 Table 1 ii (Sieving requirements material passing through 75 micron IS sieve)	-
3.3 Table 1 iii (Suspensibility)	-
3.3 Table 1 iv (Acidity/Alkalinity)	-
3.3 Table 1 v (Wettability)	-

-
excluding Cl 3.3, Table1, Sl No. I & III Content & Suspensibility;

14924

BIS, Northern Regional Laboratory (NRL)

None

IS 1783 : Part 1 (2014)

Drums large, fixed ends - Specification: Part 1 grade A drums (Fourth Revision)

Rs.4800/- and testing charges as per relevant referred View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (Capacity)	-
5 (Dimensions (Type 1 C Drums Figure 1))	-
5 (Dimensions (Type 1 D Drums Figure 1))	-
5 (Dimensions (Type 1 C Drums Figure 2))	-
5 (Dimensions (Type 1 D Drums Figure 2))	-
6 (Material)	-
7.1 (Construction)	-
7.2 (Construction)	-
7.3 (Construction)	-
7.4 (Construction)	-
7.5 (Construction)	-
7.6 (Construction)	-
8 (Finish )	-
9.3 (Hydraulic Pressure Test)	-
9.2 (Drop Test)	-

-
-

14925

BIS, Central Laboratory (CL)

None

IS 6967 (1973)

Specification for steels for electrically welded round link chains

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 Table 2 (Carbon- IS 228)	-
5.1 Table 2 (Manganese- IS 228)	-
5.1 Table 2 (Sulphur- IS 228)	-
5.1 Table 2 (Phosphorous- IS 228)	-
5.1 Table 2 (Silicon- IS 228)	-

-
-

14926

BIS, Central Laboratory (CL)

None

IS 1660 (2009)

Wrought aluminium utensils - Specification (First Revision)

Rs 6760/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Classification Heavy/Medium/L:ight)	-
0.5 (Fabrication)	-
5.1 (The utensil shall be pressed or spun from one piece)	-
5.2 ( Body Thickness of the thinnest part of the finished utensil, mm Not declared )	-
5.2 (Lid Thickness of the finished utensil, mm)	-
6.1 & Table 1 ( i) Name of Utensil )	-
6.1 & Table 1 (ii) Shape of Utensil)	-
6.1 & Table 1 ( Nominal Size, mm)	-
6.1 & Table 1 (Inside dia, Φ D mm Not declared )	-
6.1 & Table 1 (Outside dia Ф NA)	-
6.1 & Table 1 (Height NA)	-
6.1 & Table 1 (Capacity, l NA)	-
6.1 ( Minimum sheet thickness for nominal size )	-
7.1 (HANDLES ,When fitted shall be of aluminium, stainless steel or of other suitable fire resistance material These shall be fastened to the utensils by tightly drawn aluminium or stainless steel rivets, by welding, by screwing to cast bosses or by riveting between flange at the end of the handles. Handles shall be so shaped and positioned to facilitate the carrying and handling of the utensils in normal use )	-
7.2 (Handles shall be sufficiently strong to support a mass in the utensils equivalent to three times the mass of the water capacity of the utensils in the position of normal use without visible permanent deformation of the handle or utensil)	-
8.1 (The utensils shall be clean reasonably free from distortion, dents, wrinkles, wavy surface, burrs, scratches, pitting and deep tool marks and other surface defects)	-
8.2 (The design of the utensils shall be such that it is easy to clean and prevent accumulation of dirt)	-
8.4.1.2 ( Finish of the coating: The coating shall be smooth continuous and uniform in appearance, and shall be adherent. It shall be free from powdery areas, loose films and discontinuities, such as breaks and scratches. The size and number of contact marks shall be minimum consistent with good practice.)	-
( Clauses 4, 4.1, 4.2 and 4.3) (Copper of IS 21)	-
( Clauses 4, 4.1, 4.2 and 4.3) (Magnesium of IS 21)	-
( Clauses 4, 4.1, 4.2 and 4.3) (Silicon of IS 21)	-
( Clauses 4, 4.1, 4.2 and 4.3) (Iron of IS 21)	-
( Clauses 4, 4.1, 4.2 and 4.3) (Manganese of IS 21)	-
( Clauses 4, 4.1, 4.2 and 4.3) (Zinc of IS 21)	-
( Clauses 4, 4.1, 4.2 and 4.3) (Chromium of IS 21)	-
( Clauses 4, 4.1, 4.2 and 4.3) (Titanium / other Grain of IS 21)	-
8.4.2 (A coating of thickness 25 to 100 microns is generally required)	-
8.4.3 (Abrasion Resistance When the coating surface is rubbed two or three times with emery paper with emery conforming to grit number 180 using medium finger pressure, it shall not abrade the surface but shall skid over the surface showing not more than a trace of whitening of the surface)	-
8.4.4 (The colour of the hard anodic coating varies depending upon the alloy, thickness of the coating and electrolye. Normally the colour may vary from dark grey (almost black) to light grey. )	-
8.4.4 (The film will appear dark grey when wet. )	-
8.4.5 (When the coated surface is rubbed two or three times with fine emery paper grit number 180 using medium finger pressure, cloth or paper shall not abrade the surface. A faint trace of whitening on the cloth or paper is permissible)	-
9 (The manufacturer shall provide full instructions for use and cleaning for coated or hard anodized utensils)	-
10 (Each vessel shall be legibly and indelibly stamped on the outside surface or handle with the manufacturer’s name or registered trade-mark, size and thickness or class. )	-
Clause 8.6.1 (Performance test)	-
Clause 8.6.2 (Ground Nut Oil Test for Leakage)	-
5.4 (Qualitative and Anodized Coating)	-
5.5 (Qualitative and Anodized Coating)	-
8.3 (Anodized Coating)	-
8.5 (Plastic Coating)	-
8.1 (Qualitative)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm; excluding TF not available for 1. Coating test 2. Hard Anodized;

14927

BIS, Central Laboratory (CL)

None

IS 11513 (2017)

Hot rolled carbon steel strip for cold rolling purposes - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 (Workmanship)	-
Cl 9 (Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width )	-
6.1 (Carbon %)	-
6.1 (Sulphur %)	-
6.1 (Phosphorus %)	-
6.1 (Manganese %)	-
6.1 (Silicon %)	-
6.1 ( Aluminium %)	-
6.1 ( Nitrogen%)	-
6.1 (Boron)	-
6.1 ( Copper %)	-
6.1 ( Ti)	-
6.1 (V)	-
6.1 ( Nb)	-
6.1 (Microalloying)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

14928

BIS, Central Laboratory (CL)

None

IS 336 (1973)

Specification for ether

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl no .3.2 (Odour and Taste )	-
Cl no .3.3.1 (Composition )	-
Cl no .3.4 (Solubility )	-
Cl no .3.5 [ Table 1, Sl no.(i) ] Appendix A 2 (Relative density at 20 °C Solvent Grade )	-
Cl no .3.5 [ Table 1, Sl no.(iv) ] Appendix A 5 (Residue on Evaporation )	-
Cl no .3.5 [ Table 1, Sl no.(v) ] Appendix A 6 (Methyl alcohol )	-
Cl no .3.5 [ Table 1, Sl no.(vi) ] Appendix A 7 (Aldehydes and acetone )	-
Cl no .3.5 [ Table 1, Sl no.(vii) ] Appendix A 8 (Sulphurous acids and other free acids )	-

-
excluding iii) Distillation range;

14929

BIS, Eastern Regional Laboratory (ERL)

None

IS 9857 (1990)

Welding cables - Specification (First Revision)

Rs 11400/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (Conductor : Material )	-
5 (SEPARATOR)	-
6 (COVERING)	-
7 (CONDUCTOR : CONSTRUCTION )	-
8 (S E P A R A T O R)	-
9.1 (C O V E R I N G : Application )	-
9.2 (T h i c k n e s s o f C o v e r i n g)	-
9.3 (T o l e r a n c e on Thickness o f C o v e r i n g)	-
9.4 (A p p l i c a t i o n of C o v e r i n g)	-
9.5 (Colour of C o v e r i n g)	-
10.1 a) 1) (Annealing test - IS 10810: Part 1)	-
10.1 a) 2) (Conductor resistance tes - IS 10810 : Part 5)	-
10.1 c) 1) (Physical tests for covering : Tensile strength )	-
10.1 c) 1) (Physical tests for covering : Elongation at break )	-
10.1 c) 2) (Physical tests for covering - Ageing in Air oven : Tensile strength variation)	-
10.1 c) 2) (Physical tests for covering -Ageing in Air oven : Elongation at break )	-
10.1 c) 5) (Hot set test )	-
10.1 c) 5) (Permanent set )	-
11.1 (High Voltage Test ( Water Immersion Test ))	-
11.4 (Flammability Test)	-
12.1 (Manufacturer's Identification)	-
12.2 (Cable Identification)	-
12.3 (Cable Code)	-

-
Except T/S after ageing in air bomb, .oil resistance test, static flexibility test. "Declarations Required: Type of covering & Size"

14930

BIS, Northern Regional Laboratory (NRL)

None

IS 12592 (2002)

Precast concrete manhole cover and frame - Specification (First Revision)

1809 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 (Grade)	-
3 (Type/Shape of Cover)	-
4.4 (Reinforcement)	-
4.4 (Reinforcement)	-
4.5 (Steel Fibres - Diameter / equivalent diameterofsteel tibres)	-
4.5 (Steel Fibres - The aspect ratio of the tibres)	-
5.2 and Table 1 (Dimensions of Frame - A)	-
5.2 and Table 1 (Dimensions of Frame - B)	-
5.2 and Table 1 (Dimensions of Frame - C)	-
5.2 and Table 1 (Dimensions of Frame - D)	-
5.2 and Table 1 (Dimensions of Frame - E)	-
5.2 and Table 1 (Dimensions of Frame - F)	-
5.2 (Dimensions of cover- Diameter)	-
5.2 (Clearance at top between the frame and the cover all round the periphery)	-
5.2 (Top surface ofthe frame and cover is in level)	-
5.2 (Suitable taper matching with taper given for the frame shall be provided to the periphery of the cover)	-
5.2 and Fig 1 (Clear cover to reinforcement)	-
5.2 and Fig 1 (Distance of housing from the edge)	-
7.4.1 (Edge Protection and Finishing - Frame)	-
7.4.1 (Edge Protection and Finishing - Frame)	-
7.4.1 (Edge Protection and Finishing - Frame)	-
7.4.1 (Edge Protection and Finishing - Frame)	-
7.4.2 (Edge Protection and Finishing - Cover)	-
8 (LIFTING HOOKS)	-
9.1 (General)	-

-
Excluding Load Test

14931

BIS, Southern Regional Laboratory (SRL)

None

IS 205 (1992)

Non - Ferrous metal butt specification (Fourth Revision)

Rs.1500.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 (TYPES)	-
5.1- Table 2,3,4,5 & Fig-1 & 2 (Dimensions- Type of Hinge 1.Length 2.Breadth 3.Butt Dia 4.Pin Dia 5.Thickness of Flap)	-
5.1- Table 2,3,4,5 & Fig-1 & 2 (Dimensions- 1. Holes for Screw Desination 2. No. of screw Holes)	-
5.2 ,Table 6 (Tolerances-Tolerances on dimensions of hinges )	-
6.2- Table 2,3,4,5 (Kunckles)	-
6.3 (Screw Holes)	-
6.3.2- Table 2,3,4,5 (Number of Holes)	-
8.1 (Packing - Each hinge shall be packed in card board boxes or in any other approved packing. The number of hinges in a package shall be as under)	-
8.2 (Packing -Each Package shall bear the following Particulars)	-
6.3.3 Fig-1 (Position of Holes)	-

-
" 6 pcs . Excluding Excl anodic coating, chemical tests

14932

BIS, Central Laboratory (CL)

None

IS 2028 (2004)

Open jaw wrenches (Spanners) - Specification (Fijih Revision)

Rs.3700/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Dimensions- a)	-
3.1 (Dimensions- b)	-
3.1 (Dimensions- l)	-
3.2, 3.3, 3.4 (Dimensions- a)	-
3.2, 3.3, 3.4 (Dimensions- b1)	-
3.2, 3.3, 3.4 (Dimensions- b2)	-
3.2, 3.3, 3.4 (Dimensions- l)	-
5 (Hardness- upto 32 mm)	-
5 (Hardness- over 32 mm)	-
6 (Workmanship And Finish)	-
6 (Workmanship And Finish)	-

-
Please refer status of IS 3748 for test facility status of Chemical disciplince.; excluding -; i)Torque testing(CL 8)

14933

BIS, Central Laboratory (CL)

None

IS 6240 (2008)

Hot rolled steel plate (Up To 6 Mm) sheet and strip for the manufacture of low pressure liquefiable gas cylinders (Fourth Revision)

9710 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 7 (UTM)	-
Cl 8 (Press)	-
Cl 9 (Strainage Embrittlement)	-
Cl 10 (Erichsen Cupping)	-
Cl 13 (Length, Width & Thickness)	-
6.1 (Carbon %)	-
6.1 (Sulphur %)	-
6.1 (Phosphorus %)	-
6.1 (Manganese %)	-
6.1 (Silicon %)	-
6.1 ( Aluminium %)	-
6.1 (Nitrogen%)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

14934

BIS, Northern Regional Laboratory (NRL)

None

IS 2785 (1979)

Specification for natural cheese (Hard Variety), processed cheese, processed cheese spread and soft cheese (First Revision)

Rs 3000/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.3.1 (Appearance)	-
3.3.2 (Odour and Flavour)	-
3.3.3 (Texture and Consistency)	-
3.3.4- Table 1-i (Moisture- Annex A)	-
3.3.4- Table 1-ii (Milk fat ( on dry basis)- Annex B)	-
3.3.4- Table 1-iii (Salt ( added sodium chloride)- Annex C)	-
3.3.4- Table 1-i (Moisture- Annex A)	-

-
Excluding Lactose Content

14935

BIS, Central Laboratory (CL)

None

IS 14276 (2016)

Cement bonded particle boards - Specification (First Revision)

11797 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 (Finish)	-
7 (Dimensions and Tolerances)	-
8.5 (Workability)	-
10.3, Table-1 (Test for Density)	-
10.5, Table-1 (Test for Water Absorption)	-
10.6, Table-1 (Test for swelling in water)	-
10.7, Table-1 (Test for modulus of Rupture)	-
10.8, Table-1 (Test for modulus of Elasticity)	-
10.9, Table-1 (Test for tensile strength perpendicular to Surface)	-
10.1, Table-1 (Test for Screw Withdrawal Strength)	-
Clause 8.2 Table 1 (Moisture content)	-

-
"Test facility not available for 10.8 Tensile Strength Perpendicular to Surface After Ageing, 10.10 -Abrasion Resistance, 10.11 - Resistance to Steam, 10.14 - Resistance to Stain ,; " Sample Test Parameter not available in CL: 10.5 Test for Water Absorption, 10.6 Test for Swelling in Water, 10.7 Test for Modulus of Rupture(Wet),10.8 Test for Modulus of Elasticity (Wet), 10.9Test for Tensile Strength Perpendicular to Surface (accelerated ageing test)," SIZE: 2 Boards Of Full Size Sample Size without dimensional measurements: Length-1200 mm, width-1200

14936

BIS, Northern Regional Laboratory (NRL)

None

IS 733 (1983)

Specification for wrought aluminium and aluminium alloy bars, rods and sections (For General Engineering Purposes) (Third Revision)

450/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 5.1, Table 2 (Tensile Strength- IS 1816)	-
Cl. 5.1, Table 2 (Elongation on 50 mm or 5.65√So Gauge Length)	-
Cl. 0.4, 5.1, Table 1 (Aluminium- IS 504 or by any other suitable instrumental method)	-
Cl. 0.4, 5.1, Table 1 (Copper- IS 504 or by any other suitable instrumental method)	-
Cl. 0.4, 5.1, Table 1 (Silicon- IS 504 or by any other suitable instrumental method)	-
Table-1, Clause - 5.1 (Manganese)	-
Cl. 0.4, 5.1, Table 1 (Iron- IS 504 or by any other suitable instrumental method)	-
Cl. 0.4, 5.1, Table 1 (Zinc- IS 504 or by any other suitable instrumental method)	-
Cl. 0.4, 5.1, Table 1 (Titanium and / or other grain refining elements - IS 504 or by any other suitable instrumental method)	-
Cl. 0.4, 5.1, Table 1 (Chromium- IS 504 or by any other suitable instrumental method)	-
Cl. 0.4, 5.1, Table 1 (Ti+ V- IS 504 or by any other suitable instrumental method)	-
Cl. 0.4, 5.1, Table 1 (Total Impurities- IS 504 or by any other suitable instrumental method)	-
Cl. 0.4, 5.1, Table 1 (Cr+ Mn- IS 504 or by any other suitable instrumental method)	-

-
Complete except 0.2% proof stress facility

14937

BIS, Central Laboratory (CL)

None

IS 2645 (2003)

Integral waterproofing compounds for cement mortar and concrete - Specification (Second Revision)

Rs.12770.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 3.3 (Compressive Strength, At 3days & 7 days)	-
Cl 3.2 (Initial & Final)	-
Clause 3.4 (Chloride content)	-
Cl 3.1 (The permeability of water in specimen Prepared with WPC shall be less than half the permeability of plain cement specimens. (i.e ; < 50 percent))	-
Clause 3.1 (Permeability to water of cement mortar with Water proofing compound)	-

-
complete

14938

BIS, Central Laboratory (CL)

None

IS 13785 (1993)

Pesticide - Dodine WP - Specification

Rs.3350.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2 (Description)	-
3.3 Table 1 i (Dodine content)	-
3.3 Table 1 ii (Sieving requirements material passing through 75 micron IS sieve)	-
3.3 Table 1 iv (Acidity/Alkalinity)	-
3.3 Table 1 v (Wettability)	-

-
-

14939

BIS, Central Laboratory (CL)

None

IS 13692 (1993)

Metalaxyl mancqzeb WP - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2 (Description)	-
3.3 Table 1 i (Metalaxyl content,)	-
3.3 Table 1 iii (Sieving requirements material passing through 75 micron IS sieve)	-
3.3 Table 1 v (Wettability)	-

-
excluding Table1 Cl. 3.3, Sl. No. 2 Metalaxyl Content;

14940

BIS, Central Laboratory (CL)

None

IS 15965 (2012)

Pre - Painted aluminium zinc alloy metallic coated steel strip and sheet (Plain)

Rs 2850/ View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 7 (Workmanship)	-
Cl 8.3.1 (Adhesion )	-
Cl 9.1 (Workmanship)	-
Cl 11 (Length, Width & Thickness)	-
Cl 12 (Camber, Deviation From Squareness (Out-of- Square) & Deviation From Flatness)	-
Cl 12 (Weight)	-
4, 5 (CARBON)	-
4, 5 (SULPHUR)	-
4, 5 (PHOSPHURS)	-
4, 5 (MANGANESE)	-
4, 5 (SILICON)	-
4, 5 (ALUMINIUM)	-
4, 5 (NITROGEN)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm; excluding Except Coating; i)Solvent resistance test (As per annex C) ii)Dry film thickness(As per ISO 2808 -method 5B iii)Corrosion resistance(As per IS 9844) iv)Humudity Resistance (IS 101(Part 6/sec1))

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number