BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15546 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

14971

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 459 (1992)

Corrugated and semi - Corrugated asbestos cement sheets - Specification (Third Revision)

Please see remarks View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5, Table 1 (Dimensions & Tolerances - Type of Sheet - cl. 5)	-
5, Table 1, Figure 1,2 (Dimensions & Tolerances - Depth of Corrugation, D - Cl. 5)	-
5, Table 1, Figure 1,2 (Dimensions & Tolerances - Pitch of Corrugation, P - Cl. 5)	-
5, Table 1, Figure 1,2 (Dimensions & Tolerances - Overall width, B - Cl. 5)	-
5, Table 1, Figure 1,2 (Dimensions & Tolerances - Effective Width, C - Cl. 5)	-
5, Table 1, Figure 1,2 (Dimensions & Tolerances - Nominal Thickness, T - Cl. 5)	-
5, Table 1, Figure 1,2 (Dimensions & Tolerances - Length of Sheet, A - Cl. 5)	-
7 (General Appearance and Finish - Cl. 7.1)	-
7 (General Appearance and Finish - Cl. 7.2)	-

-
Except(Cl 6.1 Load Bearing Test), (Cl 6.2 Impermeability), (Cl 6.3 Frost Cracking), (Cl 6.4 Density)

14972

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 3575 (1993)

Bitumen drums - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Dimensions Drums (Figure 1))	-
4.1 (Dimensions Drums (Figure 1))	-
4.1 (Dimensions Drums (Figure 1))	-
4.1 (Dimensions Closure (Figure 2))	-
5.1 (Body and ends)	-
5.2 (Closures)	-
6.1 (Construction)	-
6.2 (Construction)	-
6.3 (Construction)	-
6.4 (Construction)	-
6.5 (Closure)	-
7.1 (Finish)	-
7.2 (Finish)	-
8 (Air Pressure Test)	-
4.1 (Dimensions Drums (Figure 1))	-
4.1 (Dimensions Drums (Figure 1))	-
4.1 (Dimensions Closure (Figure 2))	-
4.1 (Dimensions Closure (Figure 2))	-
4.1 (Dimensions Closure (Figure 2))	-

-
Test facility not available for material clause (Cl 5.1 & 5.2).

14973

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 205 (1992)

Non - Ferrous metal butt specification (Fourth Revision)

1500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 (TYPES)	-
5.1- Table 2,3,4,5 & Fig-1 & 2 (Dimensions- Type of Hinge 1.Length 2.Breadth 3.Butt Dia 4.Pin Dia 5.Thickness of Flap)	-
5.1- Table 2,3,4,5 & Fig-1 & 2 (Dimensions- 1. Holes for Screw Desination 2. No. of screw Holes)	-
5.2 ,Table 6 (Tolerances-Tolerances on dimensions of hinges )	-
6.1 (Manufacture- General)	-
6.2- Table 2,3,4,5 (Kunckles)	-
6.3 (Screw Holes)	-
6.3.1- Table 2,3,4,5 & Fig-1 & 2 (Screw Holes)	-
6.3.2- Table 2,3,4,5 (Number of Holes)	-
6.3.3 Fig-1 (Position of Holes)	-
8.1 (Packing - Each hinge shall be packed in card board boxes or in any other approved packing. The number of hinges in a package shall be as under)	-
8.2 (Packing -Each Package shall bear the following Particulars)	-

-
Excluding Clause 4 (Material)

14974

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 204 : Part 2 (1992)

Tower bolts - Specification: Part 2 non - Ferrous metals (Fifth Revision)

Rs.2100.00. View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (General)	-
5.2.1 Table 1 (Particulars-Barrel Tower Bolts)	-
5.2.2 Table 2 (Particulars-Skeleton Tower Bolts)	-
6.1- Table 1 (Dimension of Barrel tower bolts-1.Size 2.Length of Bolt or Barrel-(A or B) 4.Width of Barrel-C 5.Dia of Bolt-D 6.Length of Socket-E 7.Thickness of Metal of Barrel (Brass or Zink Alloy/Aluminium alloy/Sheet Brass)-F 8.Dia of bore of barrel or socket- G )	-
6.1- Table 1 (Dimension of barrel tower bolts-Minimum No. of equally Spaced holes in Barrel & Socket for wooden screw no 6)	-
6.2- Table 2 (Dimension of Skeleton Tower Bolts 1.Size 2.Length of Bolt -A 3.Length of Bolt Plate -B 4.Width of Bolt Plate or Staple-C 5.Dia of Bolt-D 6.Length of Staple-E 7.Thickness of Plate or Socket (Brass /Aluminium alloy or Zink Alloy)-F 8.Dia of bore of Plate or Staple-G 9.Dia of shank of Knob )	-
6.2- Table 2 (Dimension of Skeleton Tower Bolts- Nos of Staples)	-
6.2- Table 2 (Dimension of Skeleton Tower Bolts-Minimum No. of Screw holes for wood screw no 4)	-
6.2- Table 3 (PACKING)	-

-
Excluding Clause 6 (Material)

14975

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 204 : Part 1 (1991)

Tower bolts - Specification: Part 1 ferrous metals (Fifth Revision)

Rs.2100.00. View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (General)	-
5.2.1 Table 1 (Particulars-Barrel Tower Bolts)	-
5.2.2 Table 2 (Particulars-Sami Barrel Tower Bolts)	-
5.2.3 Table 3 (Particulars-Riveted or Spot Welded Tower Bolts)	-
5.2.4 Table 4 (Particulars-Skeleton Tower Bolts)	-
6.1- Table 1 (Dimension of Barrel tower bolts-1.Size 2.Length of Bolt-A 3.Length of Barrel-B 4.Width of Barrel-C 5.Dia of Bolt-D 6.Length of Socket-E 7.Thickness of mild steel sheet for barrel-F 8.Dia of bore of barrel or socket- G )	-
6.1- Table 1 (Dimension of Barrel tower bolts-Minimum No. of equally Spaced Screw holes in Barrel and Socket for wood screw no 6)	-
6.2- Table 2 (Dimension of Sami Barrel Tower Bolts 1.Size 2.Length of Bolt-A 3.Length of Bolt Plate-B 4.Width of Bolt Plate-C 5.Dia of Bolt-D 6.Length of Socket-E 7.Thickness of Bolt Plate or Socket-F 8.Dia of bore of Bolt Plate or socket G )	-
6.2- Table 2 (Dimension of Sami Barrel Tower Bolts-Minimum No. of equally Spaced Screw holes in Bolt Plate and Socket for wood screw no 6)	-
6.3- Table 3 (Dimension of Riveted or Spot Welded Tower Bolts- 1.Size 2.Length of Bolt-A 3.Length of Bolt Plate-B 4.Width of Bolt Plate-C 5.Dia of Bolt-D 6.Length of Socket-E 7. Length of Strap-E" 8.Thickness of Back Plate -F 9.Thickness of Socket or Upper Plate and Strap- F" 10.Dia of bore of Bolt Plate or socket- G 11. Length of Alternative Socket-H )	-
6.3- Table 3 (Dimension of Riveted or Spot Welded Tower Bolts-Minimum No. of equally Spaced Screw holes in Bolt Plate and Socket for wood screw no 6)	-
6.4- Table 4 (Dimension of Skeleton Tower Bolts 1.Size 2.Length of Bolt-A 3.Length of Bolt Plate-B 4.Width of Bolt Plate-C 5.Dia of Bolt-D 6.Length of Staple-E 7.Thickness of Plate or Staple -F 8.Dia of bore of Plate or Staple-G 9.Dia of shank of Knob-J)	-
6.4- Table 4 (Dimension of Skeleton Tower Bolts- Nos of Staples)	-
6.4- Table 4 (Dimension of Skeleton Tower Bolts-Minimum No. of Screw holes for wood screw no 6)	-
8.1 (MARKING- .)	-
8.1.1, (MARKING- )	-
9 (PACKING)	-

-
Excluding Clause 4 (Material)

14976

BIS, Central Laboratory (CL)

None

IS 7466 (1994)

Rubber gaskets for pressure cookers - Specifications (First Revison)

Rs.9480/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2 (Workmanship and Finish )	-
3.4-Table 1(i) (Requirements of Rubber Used for Gaskets-Hardness IRHD)	-
3.4-Table 1(ii) (Requirements of Rubber Used for Gaskets-Tensile strength,)	-
3.4-Table 1(iii) (Requirements of Rubber Used for Gaskets-Elongation at break)	-
3.4-Table 1(iv-a) (Requirements of Rubber Used for Gaskets-Hardness IRHD(After ageing 3 days in Aie-oven Change From Original Value))	-
3.4-Table 1(iv-b) (Requirements of Rubber Used for Gaskets-Tensile strength(After ageing 3 days in Aie-oven Change From Original Value))	-
3.4-Table 1(iv-c) (Requirements of Rubber Used for Gaskets-Elongation at break(After ageing 3 days in Aie-oven Change From Original Value))	-
3.4-Table 1(v-a) (Requirements of Rubber Used for Gaskets-Hardness IRHD(After ageing in an autoclave Change From Original Value))	-
3.4-Table 1(v-b) (Requirements of Rubber Used for Gaskets-Tensile strength(After ageing in an autoclave Change From Original Value))	-
3.4-Table 1(v-c) (Requirements of Rubber Used for Gaskets-Elongation at break(After ageing in an autoclave Change From Original Value))	-
3.5-ANNEX C (PERFORMANCE TEST FOR PRESSURE COOKER )	-
3.4-Table 1(vi) (Compression set)	-

-
-

14977

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 1783 : Part 2 (2014)

Drums large, fixed ends - Specification: Part 2 grade B drums (Fourth Revision)

5550 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (Capacity)	-
5 (Dimensions (Type 1 C Drums Figure 1))	-
5 (Dimensions (Type 1 C Drums Figure 1))	-
5 (Dimensions (Type 1 C Drums Figure 1))	-
5 (Dimensions (Type 1 C Drums Figure 1))	-
5 (Dimensions (Type 1 C Drums Figure 1))	-
5 (Dimensions (Type 1 C Drums Figure 1))	-
5 (Dimensions (Type 1 C Drums Figure 1))	-
5 (Dimensions (Type 1 C Drums Figure 1))	-
5 (Dimensions (Type 1 D Drums Figure 1))	-
5 (Dimensions (Type 1 D Drums Figure 1))	-
5 (Dimensions (Type 1 D Drums Figure 1))	-
5 (Dimensions (Type 1 D Drums Figure 1))	-
5 (Dimensions (Type 1 D Drums Figure 1))	-
5 (Dimensions (Type 1 D Drums Figure 1))	-
5 (Dimensions (Type 1 C Drums Figure 2))	-
5 (Dimensions (Type 1 C Drums Figure 2))	-
5 (Dimensions (Type 1 C Drums Figure 2))	-
5 (Dimensions (Type 1 C Drums Figure 2))	-
5 (Dimensions (Type 1 C Drums Figure 2))	-
5 (Dimensions (Type 1 C Drums Figure 2))	-
5 (Dimensions (Type 1 C Drums Figure 2))	-
5 (Dimensions (Type 1 D Drums Figure 2))	-
5 (Dimensions (Type 1 D Drums Figure 2))	-
5 (Dimensions (Type 1 D Drums Figure 2))	-
5 (Dimensions (Type 1 D Drums Figure 2))	-
5 (Dimensions (Type 1 D Drums Figure 2))	-
5 (Dimensions (Type 1 D Drums Figure 2))	-
5 (Dimensions (Type 1 D Drums Figure 2))	-
5 (Dimensions (Type 1 D Drums Figure 2))	-
7 (Construction)	-
7.2 (Construction)	-
7.3 (Construction)	-
7.4 (Construction)	-
7.5 (Construction)	-
7.7 (Construction)	-
8 (Finish )	-
9.1 (Leakage at air pressure )	-
9.2 (Drop Test)	-
9.3 (Hydraulic Pressure Test)	-

-
Expect Cl 6 (Material)

14978

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 1783 : Part 1 (2014)

Drums large, fixed ends - Specification: Part 1 grade A drums (Fourth Revision)

Rs.4800/- and testing charges as per relevant referred View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (Capacity)	-
5 (Dimensions (Type 1 C Drums Figure 1))	-
5 (Dimensions (Type 1 C Drums Figure 1))	-
5 (Dimensions (Type 1 C Drums Figure 1))	-
5 (Dimensions (Type 1 C Drums Figure 1))	-
5 (Dimensions (Type 1 C Drums Figure 1))	-
5 (Dimensions (Type 1 C Drums Figure 1))	-
5 (Dimensions (Type 1 C Drums Figure 1))	-
5 (Dimensions (Type 1 D Drums Figure 1))	-
5 (Dimensions (Type 1 D Drums Figure 1))	-
5 (Dimensions (Type 1 D Drums Figure 1))	-
5 (Dimensions (Type 1 D Drums Figure 1))	-
5 (Dimensions (Type 1 D Drums Figure 1))	-
5 (Dimensions (Type 1 D Drums Figure 1))	-
5 (Dimensions (Type 1 D Drums Figure 1))	-
5 (Dimensions (Type 1 D Drums Figure 1))	-
5 (Dimensions (Type 1 C Drums Figure 2))	-
5 (Dimensions (Type 1 C Drums Figure 2))	-
5 (Dimensions (Type 1 C Drums Figure 2))	-
5 (Dimensions (Type 1 C Drums Figure 2))	-
5 (Dimensions (Type 1 C Drums Figure 2))	-
5 (Dimensions (Type 1 C Drums Figure 2))	-
5 (Dimensions (Type 1 C Drums Figure 2))	-
5 (Dimensions (Type 1 C Drums Figure 2))	-
5 (Dimensions (Type 1 D Drums Figure 2))	-
5 (Dimensions (Type 1 D Drums Figure 2))	-
5 (Dimensions (Type 1 D Drums Figure 2))	-
5 (Dimensions (Type 1 D Drums Figure 2))	-
5 (Dimensions (Type 1 D Drums Figure 2))	-
5 (Dimensions (Type 1 D Drums Figure 2))	-
5 (Dimensions (Type 1 D Drums Figure 2))	-
5 (Dimensions (Type 1 D Drums Figure 2))	-
7.1 (Construction)	-
7.2 (Construction)	-
7.3 (Construction)	-
7.4 (Construction)	-
7.5 (Construction)	-
7.6 (Construction)	-
8 (Finish )	-
9.1 (Leakage at air pressure )	-
9.2 (Drop Test)	-
9.3 (Hydraulic Pressure Test)	-

-
Expect Cl 6 (Material)

14979

BIS, Eastern Regional Laboratory (ERL)

None

IS 3195 (1992)

Steel for the manufacture of volute and helical springs (For Railway Rolling Stock) - Specification (Third Revision)

All grades

1050 Chemical View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 3, 6.1, 6.2 & Table 1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 3, 6.1, 6.2 & Table 1 (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 3, 6.1, 6.2 & Table 1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 3, 6.1, 6.2 & Table 1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 3, 6.1, 6.2 & Table 1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 3, 6.1, 6.2 & Table 1 (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 3, 6.1, 6.2 & Table 1 (Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
7 (Hardness)	-
10 (Freedom from defects)	-
11 ( DIMENSIONS AND TOLERANCES)	-
8 (Decarburisation)	-
9 (Inclusion rating)	-
12 (Calculation of mass)	-
Cl. 3, 6.1, 6.2 & Table 1 (Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-

-
Chem- Facility not available for Vanadium.

14980

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 14846 (2000)

Sluice valve for water works purposes (50 To 1200 mm size) - specification

complete testing charges for the product are Rs.5700.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (Nominal Pressures)	-
5.1 (Nominal Sizes)	-
5.1.1 (Actual Bore)	-
7.2.1 (Manufacture - Bodies and Bonnets)	-
7.2.1 (Manufacture - Bodies )	-
7.2.2 (Manufacture - Bodies and Bonnets)	-
7.2.3 (Manufacture)	-
7.2.4 (Manufacture)	-
7.2.4 (Manufacture)	-
7.2.4 (Manufacture)	-
7.3 Table 3A 1 (Flanges)	-
7.3 Table 3A 2 (Flanges)	-
7.3 Table 3A 3 (Flanges)	-
7.3 Table 3A 4 (Flanges)	-
7.3 Table 3A 5 (Flanges)	-
7.3 Table 3A 6 (Flanges)	-
7.4.1 (Wedges )	-
7.4.1 (Wedges)	-
7.4.1 (Wedges)	-
7.4.2 (Wedge Faces)	-
7.5 (Guides and Lugs)	-
7.5 (Guides and Lugs)	-
7.5 (Guides and Lugs)	-
7.5.1 (Guides and Lugs)	-
7.6 Table 4 (Facing or Seat Rings)	-
7.6 Table 4 (Facing or Seat Rings)	-
7.6 Table 4 (Facing or Seat Rings)	-
7.6 Table 4 (Facing or Seat Rings)	-
7.7.1 Table 2,3 (Dimension of Stem and Wedge Nuts)	-
7.7.1 Table 2,3 (Dimension of Stem and Wedge Nuts)	-
7.7.1 Table 2,3 (Dimension of Stem and Wedge Nuts)	-
7.7.1 Table 2,3 (Dimension of Stem and Wedge Nuts)	-
7.7.1 Table 2,4 (Dimension of Stem and Wedge Nuts)	-
7.7.1 Table 2,5 (Dimension of Stem and Wedge Nuts)	-
7.7.2 (Stem and Wedge Nuts)	-
7.7.3 (Stem and Wedge Nuts)	-
7.7.4 (Stem and Wedge Nuts)	-
7.7.4 (Stem and Wedge Nuts)	-
7.9 (Height of Valve)	-
7.1 (Gears)	-
7.11 (Hand Wheel)	-
7.11 (Hand Wheel)	-
7.11 (Hand Wheel)	-
7.12 (Valve Caps)	-
7.12 (Valve Caps)	-
7.12 (Valve Caps)	-
7.12 (Valve Caps)	-
7.13 Table 2, 3 (Stuffing Box )	-
7.13 Table 2, 3 (Stuffing Box )	-
7.13 Table 2, 3 (Stuffing Box )	-
7.13 Table 2, 3 (Stuffing Box )	-
7.14 (By Pass Arrangements)	-
7.14 (By Pass Arrangements)	-
8 (Accessories or Optical Features)	-
9 (Coating)	-
10.1 Annex B-1 (Hydraulic Test)	-
10.1 Annex B-2 (Hydraulic Test)	-
10.2 (Flaw Detection Test for Stems)	-

-
Excluding Clause 6 (Material)

14981

BIS, Central Laboratory (CL)

None

IS 6528 (1995)

Stainless steel wire - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Table 7 (Workmanship)	-
Cl 6 (Workmanship)	-
Cl 9.1 & Table 3 (Diameter & Out Of Round)	-
Cl 10 (UTM)	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1) (Carbon)	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1) (Sulphor)	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1) (Phosphorous)	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1) (Manganese)	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1) (Silicon)	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1) (Aluminium)	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1) (Chromium)	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1) (Nickel)	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1) (Molybdenum)	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1) (Copper)	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1) (Boron)	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1) (Vanadium)	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1) (Titanium)	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1) (Nitrogen)	-

-
excluding Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

14982

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 13334 : Part 1 (2014)

Skimmed milk powder - Specification: Part 1 standard grade (Second Revision)

10430/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.6 (Listeria monocytogenes)	-
5.6 (Spore count, Anaerobic (Sulfite reducing Clostridia))	-
5.6 (Spore count, Aerobic (Bacillus cereus))	-
5.6 (Salmonella)	-
5.6 (Coagulase positive Staphylococcus aureus)	-
5.6 (Escherichia coli)	-
5.6 (Coliform count )	-
5.6 (Bacterial count)	-
5.6 (Coliform count )	-
5.6 (Bacterial count)	-
5.6 (Coliform count )	-
5.6 (Listeria monocytogenes)	-
5.6 (Bacterial count)	-
5.6 (Coliform count )	-
5.6 (Scorched particles)	-
5.6 (Titratable acidity (lactic acid))	-
5.6 (Total ash (on dry basis))	-
5.6 (Insolubility index)	-
5.6 (Milk fat)	-
5.6 (Milk protein in milk solids not fat)	-
5.6 (Moisture)	-
5.2 (Absence of extraneous matter, added colour and added flavour)	-
4 (Description)	-
Cl 5.4 (The flavour of the product or of the reconstituted milk shall be pleasant and clean (see IS 10030).)	-
5.6 (Insolubility index)	-

-
Complete for chemical section.

14983

BIS, Southern Regional Laboratory (SRL)

None

IS 1879 (2010)

Malleable cast iron pipe fittings - Specification (Third Revision)

Rs.7800.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1.1 (Type of Fittings - IS 1879)	-
5.1.2 (Size designation - IS 1879)	-
5.1.2.1 (Equal fitting - IS 1879)	-
5.1.2.2 (Unequal fitting -IS 1879)	-
5.1.3 (Right and Left hand thread - IS 1879)	-
5.1.1 (Code Number -IS 1879)	-
6.1 (Tensile Strength - IS 14329)	-
10.ii) (Uniformity of Galvanized coating-IS 2633)	-
10.i) (Mass of Galvanized coating)	-
10.iii) (Adhesion of Galvanized coating IS 2629)	-

-
" 3 pcs+1 test bar+50g Excluding excl thread checking and pressure test

14984

BIS, Central Laboratory (CL)

None

IS 12681 (1989)

Sodium nitrate for explosives and pyrotechnic industry - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 2.2, Table-1, Sr.no. 1 (Assay,)	-
Cl. 2.2, Table-1, Sr.no. 2 (Moisture and volatile matter )	-
Cl. 2.2, Table-1, Sr.no. 3 (matter insoluble in water)	-
Cl. 2.2, Table-1, Sr.no. 4 (Nitrites (as NaNO2))	-
Cl. 2.2, Table-1, Sr.no. 5 (Chlorides (as NaCl))	-
Cl. 2.2, Table-1, Sr.no. 6 (Sulphates( as Na2SO4))	-
Cl. 2.2, Table-1, Sr.no. 7 (Chlorates)	-
Cl. 2.2, Table-1, Sr.no. 9 (Iodates(NaIO4))	-
Cl. 2.2, Table-1, Sr.no. 10 (Total calcium and magnesium or compounds of these metals calculated as oxides.)	-
Cl. 2.2, Table-1, Sr.no. 11 (Ammonium compounds (as NH4NO3))	-
Cl. 2.2, Table-1, Sr.no. 12 (pH of 10 percent solution)	-
Cl. 2.2, Table-1, Sr.no. 1 (Assay,)	-
Cl. 2.2, Table-1, Sr.no. 2 (Moisture and volatile matter )	-
Cl. 2.2, Table-1, Sr.no. 3 (matter insoluble in water)	-
Cl. 2.2, Table-1, Sr.no. 4 (Nitrites (as NaNO2))	-
Cl. 2.2, Table-1, Sr.no. 5 (Chlorides (as NaCl))	-
Cl. 2.2, Table-1, Sr.no. 6 (Sulphates( as Na2SO4))	-
Cl. 2.2, Table-1, Sr.no. 7 (Chlorates)	-
Cl. 2.2, Table-1, Sr.no. 9 (Iodates(NaIO4))	-
Cl. 2.2, Table-1, Sr.no. 10 (Total calcium and magnesium or compounds of these metals calculated as oxides.)	-
Cl. 2.2, Table-1, Sr.no. 11 (Ammonium compounds (as NH4NO3))	-
Cl. 2.2, Table-1, Sr.no. 12 (pH of 10 percent solution)	-

-
-

14985

BIS, Central Laboratory (CL)

None

IS 7098 : Part 1 (1988)

Specification for crosslinked polyethylene insulated pvc sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision)

26250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 (CONDUCTOR: MATERIALS)	-
4 (INSULATION : MATERIALS)	-
5.1 (FILLER AND INNER SHEATH)	-
5.2 (FILLER AND INNER SHEATH)	-
6 (ARMOURING)	-
7 (OUTER SHEATH)	-
8.1 (CONDUCTOR: CONSTRUCTION)	-
8.2 (PROTECTIVE BARRIER)	-
8.3 (SIZE OF NEUTRAL CONDUCTOR)	-
9.1 (Insulation Applied by extrusicn)	-
9.2 (Thickness of Insulation - Average)	-
9.3 (Thickness of Insulation - Minimum)	-
9.2 (Thickness of Insulation - Average)	-
9.3 (Thickness of Insulation - Minimum)	-
9.4 (Application of Insulation)	-
10.1 (Core Identification)	-
10.2 (Core Identification- Neutral)	-
10.3 (Core Identification by number )	-
10.4 (Core Identification by number - Neutral )	-
11 (LAVING UP OF CORES)	-
12.1 & 12.2 (Inner sheath : Application)	-
12.3 (Thickness of Inner Sheath)	-
13.1 (Armouring: Application)	-
13.1.2 (Armouring: Coverage )	-
13.1.3 (Armouring: Direction of Lay )	-
13.2 (Type of armour )	-
13.3 (Armouring : Dimensions -Wire Diameter)	-
13.3 (Armouring : Dimensions -Formed wire )	-
13.4 (Armour: Joint)	-
13.5 (Armouring : Resistance Test)	-
13.6 a) (ARMOURING: Tensile Strength)	-
13.6 b) (ARMOURING: Elongation )	-
13.6 c) (ARMOURING: Torsion Test (For round wire ) )	-
13.6 d) (ARMOURING: Winding Test(For formed wire))	-
13.6 e) (ARMOURING: Uniformity of zinc coating)	-
13.6 f) (ARMOURING: Mass of zinc coating )	-
13.6 g) (ARMOURING: Resistivity)	-
14.1 (Outer Sheath : Application)	-
14.2 (Colour of outer sheath)	-
14.3 (Thickness of outer sheath - AVERAGE)	-
14.3 (Thickness of outer sheath - minimum)	-
15.1 a) i) (Annealing Test ( For copper wire ) )	-
15.1 a) ii) (Tensile test (for aluminium) - Before stranding )	-
15.1 a) ii) (Tensile test (for aluminium) - After stranding )	-
15.1 a) iii) (Wrapping test (for aluminium))	-
15.1 a) iv) (Resistance test - Main conductor)	-
15.1 a) iv) (Resistance test - Neutral conductor)	-
15.1 d) i) (Phyaical tests for insulation : Tensile Test)	-
15.1 d) i) (Phyaical tests for insulation : Elongation)	-
15.1 d) ii) (Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-
15.1 d) ii) (Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-
15.1 d) iii) (Phyaical tests for insulation : Hot set )	-
15.1 d) iii) (Phyaical tests for insulation : Permanent set )	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage )	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage - Crack observed )	-
15.1 d) v) (Insulation: Waterabsorption(gravimetric))	-
15.1 e) i) (Physical tests for outer sheath : Tensile stregth)	-
15.1 e) i) (Physical tests for outer sheath : Elongation)	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation )	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-
15.1 e) iii) (Sheath: Loss of mass in air oven)	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage )	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage - Crack observed )	-
15.1 e) v) (Sheath : Hot deformation)	-
15.1 e) vi) (Sheath : Heat shock test)	-
15.1 e) vii) (Sheath : Thermalstability)	-
15.1 f) (INSULATION RESISTANCE TEST : Volume resistivity )	-
16.2 (HIGH VOLTAGE TEST )	-
16.3 (FLAMMABILITY TEST : Period of Burning )	-
16.3 (FLAMMABILITY TEST : Unaffected length )	-
17.1 (Manufacturer'. identification)	-
17.2 (cable Indentification )	-
Cl.8 (Conductor)	-
Cl.8 (Conductor)	-
Cl.8 (Conductor)	-
Cl.15.4 (Cold Bend Test (for outer sheath))	-
Cl.15.4 (Cold Impact Test (For outer sheath))	-
Cl.13.5.1 and Table 7 (Resistance Test for Armouring (other than mining Cables))	-

-
TF not available Cat C1 & C2

14986

BIS, Northern Regional Laboratory (NRL)

None

IS 778 (1984)

Specification for 2010 copper alloy gate, globe and check valves for waterworks purposes (Fourth Revision)

Rs 4500/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1.1 (Body End Ports -IS 778)	-
7.1.2 (Water-Way Area - IS 778)	-
7.1.3.1-Table2 (length of threaded portion in screwed end valves - IS 778)	-
7.1.4.1- Table 3 (Diameter of flange - IS 778)	-
7.1.4.1- Table 3 (Thickness of flange - IS 778)	-
7.1.4.1- Table 3 (Diameter of Belt circle -IS 778)	-
7.1.4.1- Table 3 (Diameter of holes -IS 778)	-
7.1.3.1 (Thread -IS 778)	-
7.2.1.2 (pitch of threads - IS 778)	-
7.2.2 (Bonnet Flanges - IS 778)	-
7.6.3 (actuating threads - IS 778)	-
8.1- Table 4 (Thickness of Body and Bonnet- IS 778)	-
8.2 - Table 5 (Flat to Flat size -IS 778 )	-
8.3 - Table 6 (Width of end - IS 778)	-
8.4 - Table 7 (Stem Diameters - IS 778)	-
8.5 - Table 8 (Depth of stuffing box - IS 778)	-
8.5 - Table 8 (Dia of stuffing box - IS 778)	-
8.6- Table 9 to Table 12 (End to end/ centre to ends/ Face to face/Centre to face dimension )	-
9.3-Table 13 (Body Test ( Hydrostatic))	-
9.4 (Back Seat Test )	-
9.5-Table 13 (Seat Test ( Hydrostatic))	-

-
Facility for chemical testing is not available

14987

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 1341 (2018)

Steel Butt Hinges - Specification (Sixth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 Tables 2 to 9 (Types)	-
5.1 Tables 2 to 9 (2) (Size of Hinge)	-
5.1 Tables 2 to 9 (3) (Length A)	-
5.1 Tables 2 to 9 (4) (Breadth B)	-
5.1 Tables 2 to 9 (4) (Breadth B1)	-
5.1 Tables 2 to 9 (4) (Breadth B2)	-
5.1 Tables 2 to 9 (5) (Thickness of Flap C)	-
5.1 Tables 2 to 9 (6) (Diameter of Hinge Pin D)	-
5.1 Tables 2 to 9 (7) (Number of Knuckles)	-
5.1 Tables 2 to 9 (8) (Number of Screw Holes)	-
5.1 Tables 2 to 9 (9) (Holes for Screw No.)	-
6.1 (General)	-
6.1 (General)	-
6.1 (General)	-
6.2.1 (Knuckles)	-
6.3 (Pins)	-
6.4 (Screw Holes)	-
6.4.2 (Position of Holes)	-
6.4.2 (X)	-
6.4.2 (Y)	-
6.4.2 (Z)	-
6.4.2.1 (Position of Holes)	-
6.4.2 (X)	-

-
Excluding Clause 4 (Materials).

14988

BIS, Central Laboratory (CL)

None

IS 3055 : Part 1 (1994)

Clinical thermometers: Part 1 solid stem type - Specification (Second Revision)

Rs 5400.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (TEMPERATURE SCALE)	-
5.2 (TEMPERATURE SCALE)	-
7.1 (Patterns)	-
7.3 (Stem Classification )	-
7.3.1 (Stem)	-
7.3.1.1 (Stem)	-
7.3.2 (Maximum Indicating Device (Constriction))	-
7.3.2.1 (HARDNESS O F MAXIMUM INDICATING DEVICE)	-
7.3.3 (Loactor)	-
7.3.4 (Bulb)	-
7.3.4.1 (Bulb)	-
7.3.4.2 (Bulb)	-
7.3.5 (The bulb, capillary tube and mercury)	-
7.4 - Table 1-i (Scale range)	-
7.4 - Table 1-ii (Scale range)	-
7.4 - Table 1-iii (Smallest scale division)	-
7.4 - Table 1-iv (Smallest scale division)	-
7.4 - Table 1-v (Overall length)	-
7.4 - Table 1-vi (Scale length)	-
7.4 - Table 1-vii (Thickness of stem)	-
7.4 - Table 1-viii-a (Bulb length -Oral thermometer )	-
7.4 - Table 1-viii-b (Bulb length - Rectal thermometer)	-
7.4 - Table 1-ix-a (External dia of bulb -Oral thermometer )	-
7.4 - Table 1-ix-b (External dia of bulb - Rectal thermometer)	-
7.4 - Table 1-x (Distance from top of the constriction to the 35.5°C mark)	-
7.4 - Table 1-xi (Distance from the highest graduation line to top of the stem)	-
7.4 - Table 1-xii (Scale spacing)	-
7.5.1 (Graduation and Numbering)	-
7.5.2 (Graduation and Numbering)	-
7.5.3 (Graduation and Numbering)	-
7.5.4-a (Graduation and Numbering)	-
7.5.4-b (Graduation and Numbering)	-
7.5.4-c (Graduation and Numbering)	-
7.5.5 (Graduation and Numbering)	-
7.5.6 (Graduation and Numbering)	-
7.5.7 (Graduation and Numbering)	-
7.5.8 (Graduation and Numbering)	-
8.1 (Appearance)	-
8.2 (Ageing and Accuracy- Ref IS 6274 : 1971)	-
8.3-a (lnfluence of Immersion Time)	-
8.3-b (lnfluence of Immersion Time)	-

-
-

14989

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 10325 (2000)

Square tins - 15 kg/litre for ghee, vanaspati, edible oils and bakery shortenings - Specification (Second Revision)

3700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Dimensions and Tolerances)	-
4.1 (Dimensions and Tolerances)	-
4.1 (Dimensions and Tolerances)	-
4.2.1 (Material)	-
4.2.1 (Material)	-
4.2.2 (Handle)	-
4.3.1 (Manufacture)	-
4.3.2 (Manufacture)	-
4.3.3 (Manufacture)	-
4.3.4 (Manufacture)	-
4.3.5 (Handle)	-
4.3.5 (Handle)	-
4.3.5 (Handle)	-
4.3.5 (Handle)	-
4.3.5 (Handle)	-
4.3.5 (Handle)	-
5.1 (Air-Pressure Test)	-
5.2 (Handle Pull Test)	-
5.3 (Hydraulic Pressure Test)	-
Clause 4.3.6 (Supply Condition)	-
Clause 4.3.7 (Internal Finish)	-
Cl. 4.3.8. (Outside Finish)	-

-
Test facility not available for Material Clause as per Cl 4.2.

14990

BIS, Southern Regional Laboratory (SRL)

None

IS 2556 : Part 4 (2004)

Vitreous sanitary appliances (Vitreous China) - specification: Part 4 specific requirements of wash basins

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 3 and Clause 5.2 of IS 2556(Part 1) (Lead solubility test)	-
Clause 3 and Clause 9.6 of IS 2556(Part 1) (Resistance to staining and burning)	-
3 (General requirements-Application of Glazing-IS 2556 (Part 1))	-
3 (General requirements-Application of Glazing-IS 2556 (Part 1))	-
3 (General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-General-Wavy finiah-IS 2556 (Part 1))	-
3 (General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Flushing surface and horizontal face of WC pans,iDI lurfaco and horizontal tace of rima of we pans, Squatting pans bidets and urinals-Bubbles and specks-IS 2556 (Part 1))	-
3 (General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-General-Wavy finiah-IS 2556 (Part 1)))	-
3 (General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-General-Warpages-IS 2556 (Part 1)))	-
3 (General requirements-Permissible blemishes or defects (Flushing cisterns, Auto cisterns and covers)-General-Dislocations-IS 2556 (Part 1)))	-
3 (General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-Service space top of slab inside of bowl, front of fascis-Spots, blisters and pinholes-IS 2556 (Part 1)))	-
3 (General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-Face of intrnal, back and side-Spots, blisters and pinholes-IS 2556 (Part 1)))	-
3 (General requirements-Permissible blemishes or defects (Flushing cisterns, Auto cisterns and covers)-General-Warpage-IS 2556 (Part 1)))	-
3 (General requirements-Permissible blemishes or defects (Flushing cisterns, Auto cisterns and covers)-General-Dislocations-IS 2556 (Part 1)))	-
3 (General requirements-Permissible blemishes or defects (Flushing cisterns, Auto cisterns and covers)-Visual surface-wavy finish-IS 2556 (Part 1)))	-
3 (General requirements-Permissible blemishes or defects (Flushing cisterns, Auto cisterns and covers)-Visual surface-Spot, blisters and pinholes-IS 2556 (Part 1)))	-
3 (General requirements-Permissible blemishes or defects (Flushing cisterns, Auto cisterns and covers)-Visual surface-Bubbles and specks-IS 2556 (Part 1)))	-
3 (General requirements-Permissible blemishes or defects (Flushing cisterns, Auto cisterns and covers)-Visual surface-Polishing marks-IS 2556 (Part 1)))	-
3 (General requirements-Thickness IS 2556 (Part 1))	-
3 (General requirements-PERFORMANCE REQUIllEMENTS-WARPAGE IS 2556 (Part 1))	-
3 (General requirements-PERFORMANCE REQUIllEMENTS-CRAZING IS 2556 (Part 1))	-
4 (PAITERNS)	-
4 (SIZE)	-
5.1-Table 2 (DIMENSIONS AND TOLERANCES-Functional Dimensions-A)	-
5.1-Table 2 (DIMENSIONS AND TOLERANCES-Functional Dimensions-B)	-
5.1-Table 2 (DIMENSIONS AND TOLERANCES-Functional Dimensions-B)	-
5.2.1 (DIMENSIONS AND TOLERANCES-Connecting Dimensions)	-
5.2.2-Table 3 (DIMENSIONS AND TOLERANCES-Connecting Dimensions-d1)	-
5.2.2-Table 3 (DIMENSIONS AND TOLERANCES-Connecting Dimensions-d2)	-
5.2.2-Table 3 (DIMENSIONS AND TOLERANCES-Connecting Dimensions-e)	-
5.2.2-Table 3 (DIMENSIONS AND TOLERANCES-Connecting Dimensions-f1)	-
5.2.2-Table 3 (DIMENSIONS AND TOLERANCES-Connecting Dimensions-f2)	-
5.2.2-Table 3 (DIMENSIONS AND TOLERANCES-Connecting Dimensions-g1)	-
5.2.2-Table 3 (DIMENSIONS AND TOLERANCES-Connecting Dimensions-g2)	-
5.2.2-Table 3 (DIMENSIONS AND TOLERANCES-Connecting Dimensions-g3)	-
5.2.2-Table 3 (DIMENSIONS AND TOLERANCES-Connecting Dimensions-g4)	-
5.2.2-Table 3 (DIMENSIONS AND TOLERANCES-Connecting Dimensions-g4)	-
5.2.2-Table 3 (DIMENSIONS AND TOLERANCES-Connecting Dimensions-r)	-
5.2.2-Table 3 (DIMENSIONS AND TOLERANCES-Connecting Dimensions-r1)	-
5.2.2-Table 3 (DIMENSIONS AND TOLERANCES-Connecting Dimensions-s)	-
5.2.3-Table 4 (DIMENSIONS AND TOLERANCES-Connecting Dimensions for Wash Basins with Centre Tap Hole-d2)	-
5.2.3-Table 4 (DIMENSIONS AND TOLERANCES-Connecting Dimensions for Wash Basins with Centre Tap Hole-g1)	-
5.2.3-Table 4 (DIMENSIONS AND TOLERANCES-Connecting Dimensions for Wash Basins with Centre Tap Hole-g4)	-
5.2.3-Table 4 (DIMENSIONS AND TOLERANCES-Connecting Dimensions for Wash Basins with Centre Tap Hole-g4)	-
5.2.3-Table 4 (DIMENSIONS AND TOLERANCES-Connecting Dimensions for Wash Basins with Centre Tap Hole-r)	-
5.2.3-Table 4 (DIMENSIONS AND TOLERANCES-Connecting Dimensions for Wash Basins with Centre Tap Hole-r1)	-
5.2.3-Table 4 (DIMENSIONS AND TOLERANCES-Connecting Dimensions for Wash Basins with Centre Tap Hole-s)	-
5.2.3-Table 4 (DIMENSIONS AND TOLERANCES-Connecting Dimensions for Wash Basins with Centre Tap Hole-t)	-
5.2.4-Table 5 (DIMENSIONS AND TOLERANCES-Dimensions or Waste Outlet Hole-d3)	-
5.2.4-Table 5 (DIMENSIONS AND TOLERANCES-Dimensions or Waste Outlet Hole-d5)	-
5.2.4-Table 5 (DIMENSIONS AND TOLERANCES-Dimensions or Waste Outlet Hole-d6)	-
5.2.4-Table 5 (DIMENSIONS AND TOLERANCES-Dimensions or Waste Outlet Hole-h)	-
5.2.4-Table 5 (DIMENSIONS AND TOLERANCES-Dimensions or Waste Outlet Hole-p)	-
5.2.5-Table 6 (DIMENSIONS AND TOLERANCES-Fixing Dimensions for Wall Hung Wash Basin-n)	-
5.2.5-Table 6 (DIMENSIONS AND TOLERANCES-Fixing Dimensions for Wall Hung Wash Basin-p)	-
6.1 (CONSTRUCTION)	-
6.1.1 (CONSTRUCTION)	-
6.2 (CONSTRUCTION-Tap Holes)	-
6.2 (CONSTRUCTION-Tap Holes)	-
6.3-Table 5 (CONSTRUCTION-Waste Hole)	-
6.3 (CONSTRUCTION-Waste Hole-Flange dia west fitting)	-
6.4.1 (CONSTRUCTION-Fixing Arrangements-Bracket Stud)	-
6.4.1 (CONSTRUCTION-Fixing Arrangements-Bracket Stud-Horizontal distance between two stud)	-
6.4.2 (CONSTRUCTION-Fixing Arrangements-Screw Fixing-Holes)	-
6.4.2 (CONSTRUCTION-Fixing Arrangements-Screw Fixing-Hole dia)	-
6.4.3 (CONSTRUCTION-Fixing Arrangements-Rag Bolt)	-
6.5 (CONSTRUCTION-Overflow-horizontal dimension )	-
6.5 (CONSTRUCTION-Overflow-Area)	-
6.6 (CONSTRUCTION-Soap Recess(es))	-
6.8 (CONSTRUCTION-Chain Stay Hole-Dia)	-
6.9 (CONSTRUCTION-Pedestal)	-
6.9 (CONSTRUCTION-Pedestal)	-
6.9 (CONSTRUCTION-Pedestal-The height from the floor to top of the rim of basin)	-
7 (FINISH)	-

-
2 NOS

14991

BIS, Southern Regional Laboratory (SRL)

None

IS 2556 : Part 3 (2004)

Vitreous Sanitary Appliances (Vitreous China) - - Part 3: Specific Requirements of Squatting Pans

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 3 and Clause 5.2 of IS 2556(Part 1) (Lead solubility test)	-
Clause 3 and Clause 9.6 of IS 2556(Part 1) (Resistance to staining and burning)	-
3 (General requirements-Application of Glazing-IS 2556 (Part 1))	-
3 (General requirements-Application of Glazing-IS 2556 (Part 1))	-
3 (General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-General-Wavy finiah-IS 2556 (Part 1))	-
3 (General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-General-Discoloration-IS 2556 (Part 1))	-
3 (General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Polishing mark -IS 2556 (Part 1))	-
3 (General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-General-Wavy finiah-IS 2556 (Part 1)))	-
3 (General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-General-Dislocations-IS 2556 (Part 1)))	-
3 (General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-Service space top of slab inside of bowl, front of fascis-Spots, blisters and pinholes-IS 2556 (Part 1)))	-
3 (General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-Face of intrnal, back and side-Spots, blisters and pinholes-IS 2556 (Part 1)))	-
3 (General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-Face of intrnal, back and side-Polishing marks-IS 2556 (Part 1)))	-
3 (General requirements-Permissible blemishes or defects (Flushing cisterns, Auto cisterns and covers)-General-Warpage-IS 2556 (Part 1)))	-
3 (General requirements-Permissible blemishes or defects (Flushing cisterns, Auto cisterns and covers)-General-Dislocations-IS 2556 (Part 1)))	-
3 (General requirements-Permissible blemishes or defects (Flushing cisterns, Auto cisterns and covers)-Visual surface-wavy finish-IS 2556 (Part 1)))	-
3 (General requirements-Permissible blemishes or defects (Flushing cisterns, Auto cisterns and covers)-Visual surface-Spot, blisters and pinholes-IS 2556 (Part 1)))	-
3 (General requirements-Permissible blemishes or defects (Flushing cisterns, Auto cisterns and covers)-Visual surface-Bubbles and specks-IS 2556 (Part 1)))	-
3 (General requirements-Permissible blemishes or defects (Flushing cisterns, Auto cisterns and covers)-Visual surface-Polishing marks-IS 2556 (Part 1)))	-
3 (General requirements-Thickness IS 2556 (Part 1))	-
3 (General requirements-PERFORMANCE REQUIllEMENTS-WARPAGE IS 2556 (Part 1))	-
3 (General requirements-PERFORMANCE REQUIllEMENTS-CRAZING IS 2556 (Part 1))	-
4 (PATTERNS )	-
4 (SIZE)	-
5.1 (CONSTRUCTION)	-
5.1.1 (CONSTRUCTION)	-
6-Table 1 (DIMENSIONS AND TOLERANCES-A)	-
6.1-Table 1 (DIMENSIONS AND TOLERANCES-B)	-
6.1-Table 2 (DIMENSIONS AND TOLERANCES-F)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-H)	-
6.1-Table 4 (DIMENSIONS AND TOLERANCES-J)	-
6.1-Table 5 (DIMENSIONS AND TOLERANCES-Slope of bottom of pan)	-
6.1-Table 6 (DIMENSIONS AND TOLERANCES-L)	-
6.1-Table 7 (DIMENSIONS AND TOLERANCES-N)	-
6.1-Table 8 (DIMENSIONS AND TOLERANCES-P)	-
6.2-Table 2 (DIMENSIONS AND TOLERANCES-C)	-
6.2-Table 3 (DIMENSIONS AND TOLERANCES-D)	-
6.2-Table 4 (DIMENSIONS AND TOLERANCES-E)	-
6.2-Table 5 (DIMENSIONS AND TOLERANCES-G)	-
6.2-Table 6 (DIMENSIONS AND TOLERANCES-K)	-
6.2-Table 7 (DIMENSIONS AND TOLERANCES-M)	-
6.2 (DIMENSIONS AND TOLERANCES-top surface variation)	-
7 (FINLSH)	-
8.1 (FLUSHING TESTS-Toilet Paper Test)	-
8.3 (FLUSHING TESTS-Water Holding Capacity Test)	-
8.4 (FLUSHING TESTS-Saw Dust Test)	-
8.5 (FLUSHING TESTS-Splash Test)	-

-
2 NOS

14992

BIS, Southern Regional Laboratory (SRL)

None

IS 8794 (1988)

Specification for cast iron detachable joints for use with asbestos cement pressure pipes (First Revision)

3900/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1, Table 2 (External Dia of AC Pipe(D2))	-
6.1, Table 2 (Inside diaFlange(DI))	-
6.1, Table 2 (External Dia at Centre(DEC))	-
6.1, Table 2 (Collar Width(Wc))	-
6.1, Table 2 (Thickness(t))	-
6.1, Table 3 (Nominal Dia of Bolt(do))	-
6.1, Table 3 (Minimum prefared length of bolt(L))	-
6.1, Table 4 (Mass of joints)	-

-
" one set " Excluding "Excl hydrostatic test. Facility for preparation of test specimen not available"

14993

BIS, Central Laboratory (CL)

None

IS 3390 (1988)

Specification for sphygmomanometers, mercurial (Second Revision)

7800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1.1 ( Types )	-
3.1.2 (Fastening)	-
3.1.3 (Scale Range )	-
4.1 (Metal Parts)	-
4.2 (Rubber Parts -Inflation Bulb)	-
4.2 (Rubber Parts:- Rubber Tubing BEFORE AGEING)	-
4.2 (Rubber Parts:- Rubber Tubing BEFORE AGEING)	-
4.2 (Rubber Parts:- Rubber Tubing AFTER AGEING)	-
4.2 (Rubber Parts:- Rubber Tubing AFTER AGEING)	-
4.3 (Glass Parts)	-
4.4 (Plastics)	-
4.5 (Fabric)	-
4.6 (Sewing Thread)	-
4.7 (Mercury)	-
4.8.1 (Component Part)	-
4.8.2 (Component Part)	-
4.8.2.1 (Cuff Dimension & fig 1)	-
Cl. 4.8.3, (Inflating Bag)	-
4.8.4 (Tubing)	-
4.8.5 (Inflating Bulb)	-
4.9.2 (Tube Mounting and Fittings)	-
4.9.1 (Pressure Measuring Device)	-
4.9.3 (Reservoir and Connecting Tube)	-
4.9.4 (Extension Tube)	-
4.1 (Housing)	-
4.11 (Accessories)	-
4.13 (Leakage)	-
5 (WORKMANSHIP AND FINISH)	-

-
-

14994

BIS, Northern Regional Laboratory (NRL)

None

IS 1554 : Part 2 (1988)

Specification for pvc insulated (Heavy Duty) electric cables: Part 2 for working voltages from 3.3 kV up to and including 11 kV (Second Revision)

29850/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
19.13 (Test for Halogen Acid Gas Evolution)	-
3.1 (CONDUCTOR)	-
3.1.1 (CONDUCTOR)	-
4.1 (INSULATION)	-
5.1 (SCREENING)	-
5.1.1 (Non-magnetic Metallic Tape for SingleCore Unscreened and Unarmoured Cables)	-
6.1 (FILLERS AND INNER SHEATH)	-
6.2 (FILLERS AND INNER SHEATH)	-
7.1 (ARMOURING)	-
7.2 (ARMOURING)	-
8.1 (OUTER SHEATH)	-
9.1 (CONDUCTOR)	-
9.2 (CONDUCTOR)	-
10.1 (CONDUCTOR SCREENING)	-
11.1 (INSULATION)	-
11.2 (INSULATION : Thickness of Insulation)	-
11.3 (INSULATION : Tolerance on Thickness of Insulation)	-
11.4 (INSULATION : Application of Insulation)	-
12.1 (INSULATION SCREENING)	-
12.2 (INSULATION SCREENING)	-
12.3 (INSULATION SCREENING)	-
12.4 (INSULATION SCREENING)	-
13.1 (CORE IDENTIFICATION)	-
13.1.1 (CORE IDENTIFICATION)	-
14.1 (LAYING UP OF CORES)	-
15.1 (INNER SHEATH (COMMON COVERING))	-
15.2 (INNER SHEATH (COMMON COVERING))	-
15.3 (INNER SHEATH (COMMON COVERING))	-
15.4 (INNER SHEATH (COMMON COVERING) : Thickness of Inner Sheath)	-
15.4.1 (INNER SHEATH (COMMON COVERING) : Thickness of Inner Sheath)	-
16.1.1 (ARMOURING : Application)	-
16.1.2 (ARMOURING : Application)	-
16.1.3 (ARMOURING : Direction of lay )	-
16.1.4 (ARMOURING : Application)	-
16.2.1 (ARMOURING : Type of Armour)	-
16.2.2 (ARMOURING : Type of Armour)	-
16.3 (Armouring : Dimensions -Wire Diameter)	-
16.3 (Armouring : Dimensions -Formed wire )	-
16.4 (ARMOURING : Joints)	-
16.5 (ARMOURING : Resistance)	-
13.6 a) (ARMOURING: Tensile Strength)	-
13.6 b) (ARMOURING: Elongation )	-
13.6 c) (ARMOURING: Torsion Test (For round wire ) )	-
13.6 d) (ARMOURING: Winding Test(For formed wire))	-
13.6 e) (ARMOURING: Uniformity of zinc coating)	-
13.6 f) (ARMOURING: Mass of zinc coating )	-
13.6 g) (ARMOURING: Resistivity)	-
17.1 (OUTER SHEATH)	-
17.2 (OUTER SHEATH : colour )	-
17.3.1 (Thickness of Outer Sheath : Unarmoured Cables)	-
17.3.2 (Thickness of Outer Sheath : Armoured Cables)	-
18.1 a) 1) (Tests on Conductor : Annealing test (for copper))	-
18.1 a) 2) (Tensile test (for aluminium) - Before stranding )	-
18.1 a) 2) (Tensile test (for aluminium) - After stranding )	-
18.1 a) 2) (Tensile test (for aluminium) - Before stranding )	-
18.1 a) 2) (Tensile test (for aluminium) - After stranding )	-
18.1 a) 3) (Tests on Conductor : Wrapping test ( for aluminium))	-
18.1 a)4) (Tests on conductor : Conductor resistance test - Main conductor )	-
18.1 a)4) (Resistance test - Neutral conductor )	-
18.1 a)4) (Tests on conductor : Conductor resistance test - Main conductor )	-
18.1 a)4) (Resistance test - Neutral conductor )	-
18.1 d) 1) (Phyaical tests for insulation : Tensile Test)	-
18.1 d) 1) (Phyaical tests for insulation : Elongation )	-
18.1 d) 1) (Physical tests for sheath : Tensile stregth )	-
18.1 d) 1) (Physical tests for sheath : Elongation )	-
18.1 d) 1) (Physical tests for sheath : Tensile stregth )	-
18.1 d) 1) (Physical tests for sheath : Elongation )	-
18.1 d) 2) (Phyaical tests for insulation- Ageing in air Oven : Tensile Test)	-
18.1 d) 2) (Phyaical tests for insulation - Ageing in air oven : Elongation )	-
18.1 d) 2) (Phyaical tests for insulation- Ageing in air Oven : Tensile Test)	-
18.1 d) 2) (Phyaical tests for insulation - Ageing in air oven : Elongation )	-
18.1 d) 2) (Phyaical tests for insulation- Ageing in air Oven : Tensile Test)	-
18.1 d) 2) (Phyaical tests for insulation - Ageing in air oven : Elongation )	-
18.1 d) 2) (Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-
18.1 d) 2) (Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-
18.1 d) 2) (Physical tests for outer sheath -Ageing in air oven : Elongation )	-
18.1 d) 2) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-
18.1 d) 2) (Physical tests for outer sheath -Ageing in air oven : Elongation )	-
18.1 d) 2) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-
18.1 d) 2) (Physical tests for outer sheath -Ageing in air oven : Elongation )	-
18.1 d) 2) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-
18.1 d) 2) (Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-
18.1 d) 3) (Phyaical tests for insulation : Shrinkage )	-
18.1 d) 3) (Phyaical tests for insulation : Shrinkage - Crack observed )	-
18.1 d) 3) (Phyaical tests for Sheath : Shrinkage )	-
18.1 d) 3) (Phyaical tests for Sheath : Shrinkage - Crack observed )	-
18.1 d) 4) (Hot deformation : Insulation )	-
18.1 d) 4) (Hot deformation : Sheath )	-
18.1 d) 5) ( Loss of mass in air oven- Insulation )	-
18.1 d) 5) ( Loss of mass in air oven- sheath )	-
18.1 d) 6) (Heat shock test- Insulation )	-
18.1 d) 6) (Heat shock test- sheath )	-
18.1 d) 7) (Thermal stability- insulation )	-
18.1 d) 7) (Thermal stability- Sheath )	-
18.1 d) 8) (Water absorption (gravimetric)(for insulation, where applicable))	-
18.1 e) (Insulation resistance test : Volume Resistivity )	-
18.1 e) (Insulation resistance test : IR Constant )	-
19.7 (High voltage test)	-
19.8 (Flammability test)	-
19.9 (Oxygen Index Test)	-
19.10 (Flame Retardance Test on Single Cables)	-
19.11 (Flame Retardance Test on Bunched Cables)	-
19.14 (Temperature Index)	-
18.4 (Optional Test : Cold Impact )	-
20.1 (IDENTIFICATION : Manufacturer's Identification)	-
20.2 (IDENTIFICATION : Cable Identification)	-
20.3 (IDENTIFICATION : Cable Code)	-

-
"Excluding Cl.19.2 partial discharge, Cl. 19.3 bend, Cl. 19.4 Dielectric Power factor, Cl.19.5 heating cycle, Cl.19.6 impulse withstand applicable to cable with screened core i.e for 6.35/11 Kv cable, Cl.19.7 High voltage test above 3.3/3.3kV."

14995

BIS, Northern Regional Laboratory (NRL)

None

IS 3812 (Part 1) (2013)

Pulverized fuel ash - Specification: Part 1 For use as pozzolana in cement, cement mortar and concrete

Rs. 21850/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 6.1, Table 1 - i (Silicon dioxide (SiO2) plus aluminium oxide (Al2O3) plus ironoxide (Fe2O3) - IS 1727)	-
Cl. 6.1, Table 1 - ii (Silicon dioxide (SiO2) - IS 1727)	-
Cl. 6.1, Table 1 - iv (Magnesium oxide (MgO) - IS 1727)	-
Cl. 6.1, Table 1 - v ( Total sulphur as sulphur trioxide (SO3) - IS 1727)	-
Cl. 6.1, Table 1 - vi ( Available alkalis as equivalent sodium oxide (Na2O) - Annex C)	-
Cl. 6.1, Table 1 - vii ( Total Chlorides - IS 4032)	-
Cl. 6.1, Table 1 - viii ( Loss on ignition - IS 1727)	-

-
Except Reactive Silica

14996

BIS, Northern Regional Laboratory (NRL)

None

IS 9857 (1990)

Welding cables - Specification (First Revision)

Rs 11400/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (Conductor : Material )	-
5 (SEPARATOR)	-
6 (COVERING)	-
7 (CONDUCTOR : CONSTRUCTION )	-
8 (S E P A R A T O R)	-
9.1 (C O V E R I N G : Application )	-
9.2 (T h i c k n e s s o f C o v e r i n g)	-
9.3 (T o l e r a n c e on Thickness o f C o v e r i n g)	-
9.4 (A p p l i c a t i o n of C o v e r i n g)	-
9.5 (Colour of C o v e r i n g)	-
10.1 a) 1) (Annealing test - IS 10810: Part 1)	-
10.1 a) 2) (Conductor resistance tes - IS 10810 : Part 5)	-
10.1 c) 1) (Physical tests for covering : Tensile strength )	-
10.1 c) 1) (Physical tests for covering : Elongation at break )	-
10.1 c) 2) (Physical tests for covering - Ageing in Air oven : Tensile strength variation)	-
10.1 c) 2) (Physical tests for covering -Ageing in Air oven : Elongation at break )	-
10.1 c) 2) (Physical tests for covering - Ageing in Air oven : Tensile strength )	-
10.1 c) 2) (Physical tests for covering -Ageing in Air oven : Elongation variation at break )	-
10.1 c) 3) (Physical tests for covering - Ageing in Air Bomb : Tensile strength variation )	-
10.1 c) 3) (Physical tests for covering -Ageing in Air Bomb : Elongation variation at break )	-
10.1 c) 4) (Physical tests for covering - Oil Resistance : Tensile strength variation )	-
10.1 c) 4) (Physical tests for covering - Oil Resistance : Elongation variation at break )	-
10.1 c) 5) (Hot set test )	-
10.1 c) 5) (Permanent set )	-
11.1 (High Voltage Test ( Water Immersion Test ))	-
11.3 (Static Flexibility Test)	-
11.4 (Flammability Test)	-
12.1 (Manufacturer's Identification)	-
12.2 (Cable Identification)	-
12.3 (Cable Code)	-
13.1 (Packing )	-
13.2 (Marking)	-
14 (CABLE RATINGS)	-
15 (VOLTAGE DROP)	-

-
Test facility is complete

14997

BIS, Northern Regional Laboratory (NRL)

None

IS 14255 (1995)

Aertal bunched cables - For working voltages up to and including 1100 Volts - Specification

Please see remarks View breakup
Rs.16650/- for XLPE insulated single core cable, Rs.15150/- for PE insulated single core cable

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Phase/Street Lighting conductor)	-
5.1 (Insulation)	-
6.1 (Flexibility class)	-
6.2 (Compactness)	-
6.2 (No of strands)	-
6.2 (Surface)	-
6.3 (Protective barrier)	-
6.4 (size of street lighting conductor)	-
6.5 (Size of messenger conductor )	-
6.6 (Joints in messenger conductor )	-
6.6 (Direction of outer layer)	-
7.1 (Insulation)	-
7.2 ( Thickness of insulation)	-
7.3 (Tolerance on thickness of insulation )	-
7.4 (Aplication of the insulation )	-
7.5 (Colour of the insulation )	-
8.1 (Core identification)	-
8.2 (Core identification)	-
8.3 (Identification by other means)	-
9.1 (Assembly (Laying up))	-
9.2 (Assembly (Laying up))	-
9.3 (Direction of lay)	-
10.1 a) i) (Tests on phase/street light conductor: tensile test - Test method IS10810:Part 2)	-
10.1 a) ii) (Wrapping test - 10810: Part 3)	-
10.1 a) iii) (Resistance test - IS10810: Part 5)	-
10.1 b) i) (Test on messenger conductor: Breaking load - IS 10810: Part 2)	-
10.1 b) ii) (Test on messenger conductor: Elongation test - Cl 11.3)	-
10.1 b) iii) (Test on messenger conductor: Resistance test - IS 10810: Part 5)	-
10.1 c) i) (Physical tests for XLPE Insulation: Tensile strength - IS 10810: Part 7)	-
10.1 c) i) (Physical tests for XLPE Insulation: elongation at break - IS 10810: part 7)	-
10.1 c) ii) (Ageing in air oven : Tensile strength variation - IS 10810:Part 11)	-
10.1 c) ii) (Ageing in air oven : Elongation variation- IS 10810: Part 11)	-
10.1 c) iii) (Hot set test: Elongation under load - IS 10810: Part 30)	-
10.1 c) iii) (Hot set test: Permanent elongation (set) after cooling - IS 10810: Part 30)	-
10.1 c) iv) (Shrinkage test : Shrinkage - 10810:Part 12)	-
10.1 c) iv) (Shrinkage test : Crack Observed - 10810:Part 12)	-
10.1 c) v) (Water ahsorption (Gravimetric) - IS 10810: Part 33 )	-
10.1 f) (Insulation resistance (Volume resistivity) test a) volume resistivity at 27°C - IS 10810: Part 43)	-
10.1 f) (Insulation resistance (Volume resistivity) test b) volume resistivity at 70°C - IS 10810: Part 43)	-
10.1 g) (High voltage test - IS10810:Part 45)	-
11.4 (Bending Test on the Completed Cable ( Optional) )	-

-
Test facility is complete

14998

BIS, Northern Regional Laboratory (NRL)

None

IS 2692 (1989)

Ferrules for water services ? specification

3450 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 Table 2 (Dimensions Dimension of body & cap )	-
6.1 Table 2 (Dimensions Dimension of body & cap )	-
6.1 Table 2 (Dimensions Dimension of body & cap )	-
6.1 Table 2 (Dimensions Dimension of body & cap )	-
6.1 Table 2 (Dimensions Dimension of body & cap )	-
6.1 Table 2 (Dimensions Dimension of body & cap )	-
6.1 Table 2 (Dimensions Dimension of body & cap )	-
6.1 Table 2 (Dimensions Dimension of body & cap )	-
6.1 Table 2 (Dimensions Dimension of body & cap )	-
6.1 Table 2 (Dimensions Dimension of body & cap )	-
6.1 Table 2 (Dimensions Dimension of body & cap )	-
6.1 Table 2 (Dimensions Dimension of body & cap )	-
6.1 Table 2 (Dimensions Dimension of body & cap )	-
6.1 Table 2 (Dimensions Dimension of body & cap )	-
6.1 Table 2 (Dimensions Dimension of body & cap )	-
6.1 Table 3 (Dimensions of Plug, Washer Plate and Washer)	-
6.1 Table 3 (Dimensions of Plug, Washer Plate and Washer)	-
6.1 Table 3 (Dimensions of Plug, Washer Plate and Washer)	-
6.1 Table 3 (Dimensions of Plug, Washer Plate and Washer)	-
7.1 (MANUFACTURE AND WORKMANSHIP)	-
7.2 (MANUFACTURE AND WORKMANSHIP)	-
11 (Marking)	-
11 (Marking)	-
6.1 Table 3 (Dimensions of Plug, Washer Plate and Washer)	-
6.1 Table 3 (Dimensions of Plug, Washer Plate and Washer)	-
6.1 Table 3 (Dimensions of Plug, Washer Plate and Washer)	-
6.1 Table 3 (Dimensions of Plug, Washer Plate and Washer)	-
6.1 Table 3 (Dimensions of Plug, Washer Plate and Washer)	-
6.1 Table 3 (Dimensions of Plug, Washer Plate and Washer)	-
6.1 Table 3 (Dimensions of Plug, Washer Plate and Washer)	-
6.1 Table 3 (Dimensions of Plug, Washer Plate and Washer)	-
6.1 Table 3 (Dimensions of Plug, Washer Plate and Washer)	-
6.1 Table 3 (Dimensions of Plug, Washer Plate and Washer)	-
6.1 Table 3 (Dimensions of Plug, Washer Plate and Washer)	-
6.1 Table 3 (Dimensions of Plug, Washer Plate and Washer)	-
6.1 Table 3 (Dimensions of Plug, Washer Plate and Washer)	-
6.1 Table 3 (Dimensions of Plug, Washer Plate and Washer)	-
6.1 Table 3 (Dimensions of Plug, Washer Plate and Washer)	-

-
Facility for chemical testing is not available

14999

BIS, Northern Regional Laboratory (NRL)

None

IS 2681 (1993)

Non - Ferrous metal sliding door bolts (Aldrops) for use with padlocks - Specification (Third Revision)

1500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1-Total 2 (DIMENSIONS AND TOLERANCES-A)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-B)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-C)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-D)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-E)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-F)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-G)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-H)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-J)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-K)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-L)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-M)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-N)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-Q)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-S)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-T)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-W)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-A)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-B)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-C)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-D)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-E)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-F)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-G)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-H)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-J)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-K)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-L)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-M)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-Pin dia)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-R)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-T)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-U)	-
7.1 (MANUFACTURE-General)	-
7.1 (MANUFACTURE-General)	-
7.1 (MANUFACTURE-General)	-
7.1 (MANUFACTURE-General)	-
7.1 (MANUFACTURE-General)	-
8.1 (FINISH)	-

-
Facility for chemical testing is not available

15000

BIS, Northern Regional Laboratory (NRL)

None

IS 5022 (1989)

Sterilizer, instruments, table model (Third Revision)

2400/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1, Table 1 (Length (IS 5022))	-
5.1, Table 1 (Width (IS 5022))	-
5.1, Table 1 (Working Depth (IS 5022))	-
5.2 (Thickness of Body (IS 5022))	-
5.2 ( Thickness of Lid (IS 5022))	-
8.2.1 (Electric Operation (IS 5022))	-
8.2.3 (Heating Element (IS 4159))	-
8.4 (Kerosene Operation (IS 5022))	-
9.1 (Finish (IS 5022))	-
8.3 (Gas Operation (IS 5022))	-
Clause - 3.1 (CARBON)	-
Clause - 3.1 (SULPHUR)	-
Clause - 3.1 (PHOSPHURS)	-
Clause - 3.1 (MANGANESE)	-
Clause - 3.1 (NITROGEN)	-
Clause - 3.1 (SILICON)	-
Clause - 3.1 (CHROMIUM)	-
Clause - 3.1 (NICKEL)	-

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number