| 14821 |
BIS, Central Laboratory (CL)
| None
| IS 1251 (1988) |
Specification for zinc phosphide, technical |
Technical |
Rs.2300.00 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 2.1 (Description) |
- |
|
|
|
| 2.3 (Freedom from sulphides) |
- |
|
|
|
| 2.2 Table 2 i (Zinc Phosphide (Zn3P2)) |
- |
|
|
|
| 2.2 Table 2 ii (Zinc Content) |
- |
|
|
|
| 2.2 Table 2 iii (Sieving Requirements: Material passing through 150 micron IS Sieve) |
- |
|
|
|
| 2.2 Table 2 iv (Sieving Requirements: Material passing through 106 micron IS Sieve) |
- |
|
|
|
|
- |
-
- |
| 14822 |
BIS, Central Laboratory (CL)
| None
| IS 261 (1982) |
Specification for copper sulphate (Second Revision) |
- |
- View breakup
Rs 2400/- for Tech., Rs 3900/- for Pure
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 1(i) Table 1 (Copper, Tech, A-2) |
- |
|
|
|
| 1(i) Table 1 (Copper, Pure, A-2) |
- |
|
|
|
| 1(ii) Table 1 (Matter insoluble in water, Tech, A-3) |
- |
|
|
|
| 1(ii) Table 1 (Matter insoluble in water, Pure, A-3) |
- |
|
|
|
| 1(iii) Table 1 (Soluble iron and aluminium compounds ( as Fe ), Pure, A-4) |
- |
|
|
|
| 1(iv) Table 1 (pH value, Tech, A-5) |
- |
|
|
|
| 1(iv) Table 1 (pH value, Pure, A-5) |
- |
|
|
|
| 1(v) Table 1 (Chloride ( as Cl ), Tech, A-6) |
- |
|
|
|
| 1(v) Table 1 (Chloride ( as Cl ), Pure, A-6) |
- |
|
|
|
| 1(vi) Table 1 (Arsenic ( as As2O3 ), Tech, A-7) |
- |
|
|
|
| 1(vi) Table 1 (Arsenic ( as As2O3 ), Pure, A-7) |
- |
|
|
|
| 1(vii) Table 1 (Lead and zinc, Tech, A-8) |
- |
|
|
|
| 1(vii) Table 1 (Lead and zinc, Pure, A-8) |
- |
|
|
|
| Cl 3.1 (Description, Tech and Pure) |
- |
|
|
|
|
- |
-
Facility is complete for this IS;
Excluding NA |
| 14823 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 1729 (2002) |
Cast iron/ductile iron drainage pipes and pipe fittings for over ground non-pressure pipeline socket and spigot series (Second Revision) |
- |
Rs. 2850/- and testing charges as per referred Iss View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1 (Tensile Strrngth - IS1608(Pt-1)) |
- |
|
|
|
| 5.1 (Elongation - IS 1608(Pt-1)) |
- |
|
|
|
| 5.4 (Hardness- IS 1500) |
- |
|
|
|
| 7 (Leakage Test - IS 1729) |
- |
|
|
|
| 8.2-Table 1 to 32 (Dimension, a) |
- |
|
|
|
| 8.2-Table 1 to 32 (Dimension, b) |
- |
|
|
|
| 8.2-Table 1 to 32 (Dimension, c) |
- |
|
|
|
| 8.2-Table 1 to 32 (Dimension, d) |
- |
|
|
|
| 8.2-Table 1 to 32 (Dimension, e) |
- |
|
|
|
| 8.2-Table 1 to 32 (Dimension, f) |
- |
|
|
|
| 8.2-Table 1 to 32 (Dimension, g) |
- |
|
|
|
| 8.2-Table 1 to 32 (Dimension, h) |
- |
|
|
|
| 8.2-Table 1 to 32 (Dimension, i) |
- |
|
|
|
| 8.2-Table 1 to 32 (Dimension, j) |
- |
|
|
|
| 8.2-Table 1 to 32 (Dimension, k) |
- |
|
|
|
| 8.2-Table 1 to 32 (Dimension, l) |
- |
|
|
|
| 8.2-Table 1 to 32 (Dimension, m) |
- |
|
|
|
| 8.2-Table 1 to 32 (Dimension, n) |
- |
|
|
|
| 8.2-Table 1 to 32 (Dimension, p) |
- |
|
|
|
| 8.2-Table 1 to 32 (Dimension, q) |
- |
|
|
|
| 8.2-Table 1 to 32 (Dimension, r) |
- |
|
|
|
| 8.2-Table 1 to 32 (Dimension, r1) |
- |
|
|
|
| 8.2-Table 1 to 32 (Dimension, r2) |
- |
|
|
|
| 8.2-Table 1 to 32 (Dimension, s) |
- |
|
|
|
| 8.2-Table 1 to 32 (Dimension, t) |
- |
|
|
|
| 11 (Coating Test at 65degree Celcius ) |
- |
|
|
|
| 11 (Coating Test at 0degree Celcius) |
- |
|
|
|
| 5.3 (Casting Defects) |
- |
|
|
|
|
- |
-
Test facility is complete and Standard has been revised as IS 1729 : 2023
Facility for chemical testing is not available |
| 14824 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 1489 : Part 2 (2015) |
Portland - Pozzolana cement - Specification: Part 2 calcined clay based |
- |
Rs.8420/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6 - Table - 1 i (Insoluble residue - Cl 7.4 of IS 4032:1985) |
- |
|
|
|
| 6 - Table - 1 ii (Magnesia - Cl 7.2 of IS 4032:1985) |
- |
|
|
|
| 6 - Table - 1 iii (Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985) |
- |
|
|
|
| 6 - Table - 1 v (Chloride content - Cl 4.13 of IS 4032:1985) |
- |
|
|
|
| 6 - Table - 1 vi ( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985) |
- |
|
|
|
| 7 -Table 2- i (Fineness 4031 Part 2) |
- |
|
|
|
| 7 -Table 2- ii- a (Expansion by Le Chatelier- 4031 Part 3) |
- |
|
|
|
| 7 -Table 2- ii- a (Expansion after aeration - 4031 Part 3) |
- |
|
|
|
| 7 -Table 2- ii- b (Expansion by Autoclave- 4031 Part 3) |
- |
|
|
|
| 7 -Table 2- ii- b (Expansion after aeration- 4031 Part 3) |
- |
|
|
|
| 7 -Table 2- iii- a (Setting Time Initial- 4031 Part 5) |
- |
|
|
|
| 7 -Table 2-iii- b (Setting Time Final- 4031 Part 5) |
- |
|
|
|
| 7 -Table 2- iv- a (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6) |
- |
|
|
|
| 7 -Table 2- iv- b (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6) |
- |
|
|
|
| 7 -Table 2- iv- c (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6) |
- |
|
|
|
| 7 -Table 2- vi (Drying Shrinkage- IS 4031 Part 10) |
- |
|
|
|
|
- |
-
Test facility is complete for Chemical Except Transverse Strength Test |
| 14825 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 2255 (1977) |
Specification for mild steel wire rod for the manufacture of machine screws (By Cold Heading Process) (Second Revision) |
- |
Rs. 600/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7 (Sizes and tolernces) |
- |
|
|
|
| 8 (FREEDOM FROM DEFECTS) |
- |
|
|
|
|
- |
-
Test facility is complete for Chemical,Tensile test,Microaalloying Element |
| 14826 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 2266 (2024) |
STEEL WIRE ROPES FOR GENERAL ENGINEERING PURPOSE - SPECIFICATION (Sixth Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-5 (Minimum breaking force) |
- |
|
|
|
|
- |
-
Special Tensile Testing machine of more than 1000kN capacity is required
Except "Tensile test , Microalloying Elements
" |
| 14827 |
BIS, Central Laboratory (CL)
| None
| IS 1806 (2018) |
Malted milk foods - Specification (Second Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.3-Table 1- ix (Bacterial count) |
- |
|
|
|
| 4.3-Table 1- x (Coliform count) |
- |
|
|
|
| 4.3-Table 1- xi (E. coli) |
- |
|
|
|
| 4.3-Table 1- xii (Yeast and mould count) |
- |
|
|
|
| 4.3-Table 1- xiii (Salmonella) |
- |
|
|
|
| 4.3-Table 1- xiv (Shigella) |
- |
|
|
|
| 4.3-Table 1- xv (Vibrio cholerae ) |
- |
|
|
|
| 4.3-Table 1- xv ( V. parahaemolyticus) |
- |
|
|
|
| 4.3-Table 1- xvi (Faecal streptococci ) |
- |
|
|
|
| 4.3-Table 1- xvi ( Staphylococcusaureas) |
- |
|
|
|
|
- |
-
- |
| 14828 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 2141 (2000) |
Hot dip galvanized stay strand - Specification (Fourth Revision) |
- |
Rs7935/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4 (S) |
- |
|
|
|
| 4 (P) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Mass of Zinc coating- as per IS 6745 for 0.2 to 0.32 mm dia For Hard Core) |
- |
|
|
|
| 9.2 referes to IS 4826, Table 1 (Uniformity of zinc coating- As per IS 2633 for Dia 0.20 to 0.32 mm For Hard Core) |
- |
|
|
|
| 11 (a) Size) |
- |
|
|
|
| 11 (b) Construction) |
- |
|
|
|
| 11 (c) tensile designation) |
- |
|
|
|
| 11 (d) lay) |
- |
|
|
|
| 11 (e) coating) |
- |
|
|
|
| 11 (f) length) |
- |
|
|
|
| 11 ( g) mass) |
- |
|
|
|
| 11 (h) manufacturer's name or trade mark) |
- |
|
|
|
| 11 (i) lot number along with the order number) |
- |
|
|
|
| 11 (j) BIS Standards Mark) |
- |
|
|
|
| 5 (a) Grade) |
- |
|
|
|
| 5 (b) Tensile Grade) |
- |
|
|
|
| 6 (a) Lay) |
- |
|
|
|
| 6 (b) Construction) |
- |
|
|
|
| 7 (Freedom from defects) |
- |
|
|
|
| 9 (a) Tensile) |
- |
|
|
|
| 9 (b) Elongation) |
- |
|
|
|
| 9 (c) Galvanizing Test) |
- |
|
|
|
| 11 (a) Size) |
- |
|
|
|
| 11 (b) Construction) |
- |
|
|
|
|
- |
-
Chemical - complete
Mechanical Complete except except Tensile test |
| 14829 |
BIS, Central Laboratory (CL)
| None
| IS 10758 (1983) |
Specification for de - Odourizing - Cum - Disinfectant fluids |
- |
Rs.6000/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl. 3.1 (Description) |
- |
|
|
|
| Cl. 3.2 (Volatile matter) |
- |
|
|
|
| Cl. 3.3 (Stability after dilution(with artificial hard water)) |
- |
|
|
|
| Cl. 3.4 (Persistance of Odour) |
- |
|
|
|
| Cl. 3.5 (Flash point(abel)) |
- |
|
|
|
| Nil (Staphylococcal coe.) |
- |
|
|
|
| Cl. 3.6 / 2.1 (Germicidal Value) |
- |
|
|
|
| Cl. 3.6 / 2.1 (Germicidal Value) |
- |
|
|
|
| Cl. 3.6 / 2.1 (Germicidal Value) |
- |
|
|
|
| Cl. 3.6 / 2.1 (Germicidal Value) |
- |
|
|
|
| Cl. 3.6 / 2.1 (Germicidal Value) |
- |
|
|
|
| Cl. 3.1 (Description) |
- |
|
|
|
| Cl. 3.2.1 (Volatile matter (steam distillation)) |
- |
|
|
|
| Cl. 3.4 (Persistance of Odour) |
- |
|
|
|
|
- |
-
- |
| 14830 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 432 : Part 2 (1982) |
Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 2 Hard-Drawn Steel Wire |
- |
Rs 3900/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Clause 3.1.1 (Sulphur) |
- |
|
|
|
| Clause 3.1.1 (Phosphorus) |
- |
|
|
|
| Cl 5 & 6 (Diameter) |
- |
|
|
|
| Cl 7 (UTM) |
- |
|
|
|
| Cl 4.1 (Workmanship) |
- |
|
|
|
| Cl 8.3 (Bending To Both Side At 90°, Then Straight) |
- |
|
|
|
| Clause 7.1 (Ultimate Tensile Stress) |
- |
|
|
|
|
- |
-
Except Microalloying Elements
Except Proof Stress |
| 14831 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 432 : Part 1 (1982) |
Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild Steel and Medium Tensile Steel Bars |
- |
Rs 2100/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 6.2 (Diameter & Ovality) |
- |
|
|
|
| Cl 6.2 (Weight) |
- |
|
|
|
| Cl 8.2 (Bend test) |
- |
|
|
|
| Cl 5.1 (Workmanship) |
- |
|
|
|
| Cl 9.3 (Press) |
- |
|
|
|
| Clause -4, 4.1 ( CARBON) |
- |
|
|
|
| Clause -4, 4.1 (SULPHUR) |
- |
|
|
|
| Clause -4, 4.1 (SILICON) |
- |
|
|
|
| Clause -4, 4.1 (MANGANESE) |
- |
|
|
|
| Clause -4, 4.1 (PHOSPHURS) |
- |
|
|
|
| Clause -4, 4.1 (NITROGEN) |
- |
|
|
|
| Cl 6.1 (Diameter) |
- |
|
|
|
| Cl 8.1 (ultimate tensile stress, yield stress and percentage elongation) |
- |
|
|
|
| Cl 8 (Physical Requirements) |
- |
|
|
|
| Clause -4, 4.1 ( ALUMINIUM) |
- |
|
|
|
| Clause -4, 4.1 (Nickel) |
- |
|
|
|
| Clause -4, 4.1 (Chromium) |
- |
|
|
|
| Clause -4, 4.1 (Molybdenum) |
- |
|
|
|
| Clause -4, 4.1 (NIOBIUM) |
- |
|
|
|
| Clause -4, 4.2 (VANADIUM) |
- |
|
|
|
| Clause -4, 4.3 (TITANIUM) |
- |
|
|
|
|
- |
-
- |
| 14832 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 210 (2009) |
Grey iron castings - Specification (First Revision) |
- |
Rs.2700.00 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 13 (SIZE OF TEST BARS-Diameter) |
- |
|
|
|
| 13 (SIZE OF TEST BARS-Length) |
- |
|
|
|
| 15, Table 3 (TENSIL.E TEST- IS 1608 Part1 ) |
- |
|
|
|
| 16, Table 3 (Hardness Test) |
- |
|
|
|
| 6 (Chemical Composition(chemical
composition shall be as agreed to between the
purchaser and the manufacturer.)) |
- |
|
|
|
| 6 (Chemical Composition(chemical
composition shall be as agreed to between the
purchaser and the manufacturer.)) |
- |
|
|
|
| 7.1 (WORKMANSHIP AND FINISH) |
- |
|
|
|
| 10.1 (FREEDOM FROM DEFECTS) |
- |
|
|
|
| 10.2 (FREEDOM FROM DEFECTS) |
- |
|
|
|
| 6 (Chemical Composition(chemical
composition shall be as agreed to between the
purchaser and the manufacturer.)) |
- |
|
|
|
|
- |
-
Test facility available for Mechanical tests only, Excluding Transverse Test, Microstructure and Hydrostatic Test above 300mm.
Since the composition of cast iron shall be left to the discretion of the manufacture, as such element to be tested with specified requirement and tolerances if any may please be declared with method of testing.Sample size 5 pcs of 5X5 cm having dia > 3mm and thickness > 0.8 mm. |
| 14833 |
BIS, Central Laboratory (CL)
| None
| IS 1061 (2017) |
Disinfectant fluids, phenolic type - Specification (Fifth Revision) |
- |
Class Black fluid-Rs.9204. Class White fluid - Rs.10504 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.2 (Stability after Dilution) |
- |
|
|
|
| 4.3/3.2 (Germicidal Value) |
- |
|
|
|
| 4.3/3.3 (Germicidal Value) |
- |
|
|
|
| 4.3/3.4 (Germicidal Value) |
- |
|
|
|
| 4.3/3.5 (Germicidal Value) |
- |
|
|
|
| 4.3/3.5 (Germicidal Value) |
- |
|
|
|
| 4.5 (Stability on Storage) |
- |
|
|
|
| 4.3/3.5 (Germicidal Value) |
- |
|
|
|
| 4.6 (Detection of Phenolic Compounds) |
- |
|
|
|
| 4.4 (Mercury Compounds) |
- |
|
|
|
| 4.1.1 (Composition and Description) |
- |
|
|
|
| 4.1.2 (Composition and Description) |
- |
|
|
|
| 4.3/3.2 (Germicidal Value) |
- |
|
|
|
|
- |
-
- |
| 14834 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 3431 (1982) |
Specification for steel for the manufacture of volute helical and laminated springs for automotive suspension (Second Revision) |
- |
Rs 1800/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 8,Table 4 (Mechanical properties - IS 3431) |
- |
|
|
|
| 12 (Straightness) |
- |
|
|
|
| 13, Table 5&Table 6 (Dimensions and Tolerance) |
- |
|
|
|
| 10 (Freedom from defects) |
- |
|
|
|
| Cl. 2.1, 5.1 & Table 1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 2.1, 5.1 & Table 1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 2.1, 5.1 & Table 1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 2.1, 5.1 & Table 1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 2.1, 5.1 & Table 1 (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
|
- |
-
Except Cr, V and Micro alloying elements |
| 14835 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 1239 : Part 2 (2011) |
Steel tubes, tubulars and other steel fittings - Specification: Part 2 steel pipe fittings (Fifth Revision) |
- |
3400 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7.1 (Chemical Composition - Sulphur - Laddle Analysis IS 228) |
- |
|
|
|
| 7.1 (Chemical Composition - Phosphorus - Laddle Analysis IS 228) |
- |
|
|
|
| 8.1-Table 1 ( DIMENSIONS OF TUBULARS-Pieces
) |
- |
|
|
|
| 8.1-Table 1 ( DIMENSIONS OF TUBULARS-Pieces-Approximate Standard Length(A)
) |
- |
|
|
|
| 8.2-Table-2 ( DIMENSIONS OF TUBULARS-Nipples
) |
- |
|
|
|
| 8.2-Table-2 ( DIMENSIONS OF TUBULARS-Nipples-A
) |
- |
|
|
|
| 8.2-Table-2 ( DIMENSIONS OF TUBULARS-Nipples-B
) |
- |
|
|
|
| 8.2-Table-2 ( DIMENSIONS OF TUBULARS-Nipples-C
) |
- |
|
|
|
| 8.3.1-Table 3 (DIMENSIONS OF TUBULARS-Longscrews (Connectors)) |
- |
|
|
|
| 8.3.1-Table 3 (DIMENSIONS OF TUBULARS-Longscrews (Connectors)-A) |
- |
|
|
|
| 8.3.1-Table 3 (DIMENSIONS OF TUBULARS-Longscrews (Connectors)-B) |
- |
|
|
|
| 8.3.1-Table 3 (DIMENSIONS OF TUBULARS-Longscrews (Connectors)-C) |
- |
|
|
|
| 8.3.2 (DIMENSIONS OF TUBULARS-Longscrews (Connectors)) |
- |
|
|
|
| 8.3.2 (DIMENSIONS OF TUBULARS-Longscrews (Connectors)-The face of the back nut angle) |
- |
|
|
|
| 8.4.1 -Table 4 (Bends and springs) |
- |
|
|
|
| 8.4.1 -Table 4 (Bends and springs-A) |
- |
|
|
|
| 8.4.1 -Table 4 (Bends and springs-B) |
- |
|
|
|
| 8.4.1 -Table 4 (Bends and springs-C) |
- |
|
|
|
| 8.4.1 -Table 4 (Bends and springs-D) |
- |
|
|
|
| 8.4.1 -Table 4 (Bends and springs-E) |
- |
|
|
|
| 8.5-Table 5 ( Return Bends-A) |
- |
|
|
|
| 8.5-Table 5 ( Return Bends-B) |
- |
|
|
|
| 8.6 -Table 6 (Sockets-A) |
- |
|
|
|
| 8.6 -Table 6 (Sockets-B) |
- |
|
|
|
| 8.6 -Table 6 (Maximum Inside Diameter of Internal Parallel Thread) |
- |
|
|
|
| 9.1-Table 7 (Dimensions of Screwed Ends of Fittings-D
) |
- |
|
|
|
| 9.1-Table 7 (Dimensions of Screwed Ends of Fittings-E
) |
- |
|
|
|
| 9.1-Table 7 (Dimensions of Screwed Ends of Fittings-d
) |
- |
|
|
|
| 9.1-Table 8 (Dimensions of Elbows, Tees and Crosses, Equal-A) |
- |
|
|
|
| 9.1-Table 9 (Dimensions of Elbows Reducing-A) |
- |
|
|
|
| 9.1-Table 9 (Dimensions of Elbows Reducing-B) |
- |
|
|
|
| 9.1-Table 10 (Dimensions of Tees, Reducing (on the Branch)-A) |
- |
|
|
|
| 9.1-Table 10 (Dimensions of Tees, Reducing (on the Branch)-B) |
- |
|
|
|
| 9.1-Table 11 (Dimensions of Tees, Reducing (on the Run and Branch, or on the Run Only)-A) |
- |
|
|
|
| 9.1-Table 11 (Dimensions of Tees, Reducing (on the Run and Branch, or on the Run Only)-B) |
- |
|
|
|
| 9.1-Table 12 (Dimensions of Tees (Increasing on the Branch)-A) |
- |
|
|
|
| 9.1-Table 12 (Dimensions of Tees (Increasing on the Branch)-B) |
- |
|
|
|
| 9.1-Table 13 ( Dimensions of Crosses, Reducing-A) |
- |
|
|
|
| 9.1-Table 13 ( Dimensions of Crosses, Reducing-B) |
- |
|
|
|
| 9.1-Table 14 ( Elbows, Tees and Crosses, Side Outlet, Equal-A) |
- |
|
|
|
| 9.1-Table 14 ( Elbows, Tees and Crosses, Side Outlet, Equal-B) |
- |
|
|
|
| 9.1-Table 15 ( Dimensions of Elbows, Round, Male and Female, Equal-A) |
- |
|
|
|
| 9.1-Table 15 ( Dimensions of Elbows, Round, Male and Female, Equal-B) |
- |
|
|
|
| 9.1-Table 15 ( Dimensions of Elbows, Round, Male and Female, Equal-Minimum Bore of Male End) |
- |
|
|
|
| 9.1-Table 15 ( Dimensions of Elbows, Round, Male and Female, Equal-Maximum Bore of Male End) |
- |
|
|
|
| 9.1-Table 16 ( Dimensions of Elbows, Equal, 135°-A) |
- |
|
|
|
| 9.1-Table 17 (Dimensions of Y-Pieces, Female, Equal-A) |
- |
|
|
|
| 9.1-Table 18 (Dimensions of Socket, Reducing-A) |
- |
|
|
|
| 9.1-Table 19 (Dimensions of Caps-A) |
- |
|
|
|
| 9.1-Table 20 (Dimensions of Plug-Minimum Length of Thread for Basic Gauge) |
- |
|
|
|
| 9.1-Table 20 (Dimensions of Plug-Minimum Length of Thread for Basic Gauge-S) |
- |
|
|
|
| 9.1-Table 20 (Dimensions of Plug-Minimum Length of Thread for Basic Gauge-H) |
- |
|
|
|
| 9.1-Table 20 (Dimensions of Plug-Minimum Length of Thread for Basic Gauge-D) |
- |
|
|
|
| 9.1-Table 20 (Dimensions of Plug-Minimum Length of Thread for Basic Gauge-K) |
- |
|
|
|
| 9.1-Table 21 (Dimensions of Elbows, Tees and Crosses, Male, Equal-A) |
- |
|
|
|
| 9.1-Table 22 (Dimensions of Y-Pieces and Angle Tees, Male, Equal-A
) |
- |
|
|
|
| 9.1-Table 22 (Dimensions of Y-Pieces and Angle Tees, Male, Equal-B
) |
- |
|
|
|
| 9.1-Table 23 ( Dimensions of Twin Elbows and Sweep Tees, Male, Equal-A) |
- |
|
|
|
| 9.1-Table 23 ( Dimensions of Twin Elbows and Sweep Tees, Male, Equal-B) |
- |
|
|
|
| 9.1-Table 24 (Dimensions of Socket Unions-A
) |
- |
|
|
|
| 9.1-Table 25 (Dimensions of Pipe Unions-A) |
- |
|
|
|
| 9.1-Table 26 (Dimensions of Union Bends-A
) |
- |
|
|
|
| 9.1-Table 26 (Dimensions of Union Bends-B
) |
- |
|
|
|
| 9.1-Table 27 (Dimensions of Hexagon Bushes-L) |
- |
|
|
|
| 9.1-Table 27 (Dimensions of Hexagon Bushes-T) |
- |
|
|
|
| 9.1-Table 27 (Dimensions of Hexagon Bushes-A) |
- |
|
|
|
| 9.1-Table 27 (Dimensions of Hexagon Bushes-B) |
- |
|
|
|
| 9.1-Table 28 (Dimensions of Nipples, Hexagon, Equal-L) |
- |
|
|
|
| 9.1-Table 28 (Dimensions of Nipples, Hexagon, Equal-T) |
- |
|
|
|
| 9.1-Table 28 (Dimensions of Nipples, Hexagon, Equal-A) |
- |
|
|
|
| 9.1-Table 28 (Dimensions of Nipples, Hexagon, Equal-C) |
- |
|
|
|
| 9.1-Table 28 (Dimensions of Nipples, Hexagon, Equal-B) |
- |
|
|
|
| 11.1(a) (Internal hydraulic Pressure Test) |
- |
|
|
|
| 11.1(a) (Internal Air Pressure Test) |
- |
|
|
|
| 11.2.1 ( Drift Expanding Test) |
- |
|
|
|
| 11.2.2 (Taper Screw Plug Test) |
- |
|
|
|
| 14 (WORKMANSHIP) |
- |
|
|
|
| 13 and as per IS 4736 (MASS OF ZINC COATING) |
- |
|
|
|
| 13 and as per IS 4736 (UNIFORMITY OF ZINC COATING) |
- |
|
|
|
|
- |
-
- |
| 14836 |
BIS, Central Laboratory (CL)
| None
| IS 15328 (2003) |
Unplasticized Non-Pressure Polyvinyl Chloride ( PVC -U ) Pipes for use in Underground Drainage and Sewerage Systems - |
- |
3450 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.1,6.1.1
IS 12235 (Part 1)
Table 1 (Dimension of Pipes:
Mean outside Diameter, dem) |
- |
|
|
|
| 6.1,6.1.1
IS 12235 (Part 1)
Table 1 (Outside Diameter at any point, de) |
- |
|
|
|
| 6.1.2
IS 4985
Table 2 (Wall Thickness, e ) |
- |
|
|
|
| 6.1.4,
Table 3 (ii) Min. depth of engagement, A. ) |
- |
|
|
|
| 6.1.4,
Table 4 (ii) Length of Solvent Cement socket, l2 ) |
- |
|
|
|
| 7.1 (Appearance:-
) |
- |
|
|
|
| 7.2 (Colour ) |
- |
|
|
|
| 7.3
IS 1223S
( Part 2) (Vicat Softening Temperature
When determined according to IS 1223S
( Part 2), shall not be lessthan 79°C.) |
- |
|
|
|
| 7.4
IS 1223S ( Part 5) (Longitudinal Reversion:
When tested according to the methodprescribed in IS 1223S ( Part 5), shall not exceed ± 5 percent.
The pipe shall not exhibit any blisters, bubbles or crackson completion of the test.) |
- |
|
|
|
|
- |
-
Excluding -Test facility not available for Cl.8.1 Resistance to external blows at 0°C, Cl.8.2 Ring Stiffness, Cl.8.3 Resistance to internal hydrostatic Pressure (Type test), Cl. 9 Joints, Cl.10.1 Elastomeric Sealing ring joints, Cl.10.2 Solvent cemented joints.; |
| 14837 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 208 (1996) |
Door Handles - Specification ( Sixth Revision ) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.1 Table2A & 2B and Fig 1,2,3,4 (DIMENSIONS - Size (A,B,C,D,E,F,G,H,I)) |
- |
|
|
|
| 9 (MARKING) |
- |
|
|
|
| 9.1 (BIS Certification Marking) |
- |
|
|
|
|
- |
-
Excluding Finish, Quenching Test, Micro alloying elements and alloy material |
| 14838 |
BIS, Central Laboratory (CL)
| None
| IS 14333 (1996) |
High Density Polyethylene Pipe For Sewerage - |
- |
3900 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4 (Colour) |
- |
|
|
|
| 7 (Visual Appearance) |
- |
|
|
|
| 8.2 (Reversion) |
- |
|
|
|
| 6 (Dimensions of pipes) |
- |
|
|
|
| 8.4 (Melt Flow Rate) |
- |
|
|
|
| 10 (Marking) |
- |
|
|
|
| 3 (Designation) |
- |
|
|
|
|
- |
-
IS superseded by newer version;
Excluding oxidation induction time; |
| 14839 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 7226 (1974) |
Specification for cold - Rolled medium, high carbon and low alloy steel strip for general engineering purposes |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 9.1, Table 3 (i)TOLERANCE ON WIDTH) |
- |
|
|
|
| 9.1, Table 4 (ii)TOLERANCE ON THICKNESS) |
- |
|
|
|
| 5 (HARDNESS TEST) |
- |
|
|
|
| 4.1 Table 1 (Carbon- IS 228) |
- |
|
|
|
| 4.1 Table 1 (Manganese- IS 228) |
- |
|
|
|
| 4.1 Table 1 (Silicon- IS 228) |
- |
|
|
|
| 4.1 Table 1 (Sulphur- IS 228) |
- |
|
|
|
| 4.1 Table 1 (Phosphorous- IS 228) |
- |
|
|
|
|
- |
-
Excluding Cr, W, Micro Alloying Elements. |
| 14840 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 11722 (1986) |
Specification for thin walled flexible quick coupling pipes |
- |
4800 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 9 (Galvanizing ,IS 4736) |
- |
|
|
|
| 9 (Galvanizing ,IS 4736) |
- |
|
|
|
| 9 (Galvanizing ,IS 4736) |
- |
|
|
|
| 9 (Galvanizing ,IS 4736) |
- |
|
|
|
| 6 &7 ; Table 1 (Dimension & Tolerance) |
- |
|
|
|
| 8 (Length) |
- |
|
|
|
| 11, Table 3 (Angularity of Joint) |
- |
|
|
|
| 13.1 (Flattening Test,IS 2328) |
- |
|
|
|
| 13.2 (Tensile Test ,; IS 1608(P1)) |
- |
|
|
|
| 4.1 (Pipe Manufacturing Process ) |
- |
|
|
|
| 5,5.1 (Workmsnship &Finish) |
- |
|
|
|
| 9 (Galvanizing ,IS 4736) |
- |
|
|
|
|
- |
-
Excluding Microalloying Elements |
| 14841 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 1489 : Part 2 (2015) |
Portland - Pozzolana cement - Specification: Part 2 calcined clay based |
- |
Rs.8420/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6 - Table - 1 i (Insoluble residue - Cl 7.4 of IS 4032:1985) |
- |
|
|
|
| 6 - Table - 1 ii (Magnesia - Cl 7.2 of IS 4032:1985) |
- |
|
|
|
| 6 - Table - 1 iii (Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985) |
- |
|
|
|
| 6 - Table - 1 iv (Loss on ignition - Cl 7.1 of IS 4032:1985) |
- |
|
|
|
| 6 - Table - 1 v (Chloride content - Cl 4.13 of IS 4032:1985) |
- |
|
|
|
| 6 - Table - 1 vi ( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985) |
- |
|
|
|
| 7 -Table 2- ii- b (Expansion by Autoclave- 4031 Part 3) |
- |
|
|
|
| 7 -Table 2- iii- a (Setting Time Initial- 4031 Part 5) |
- |
|
|
|
| 7 -Table 2-iii- b (Setting Time Final- 4031 Part 5) |
- |
|
|
|
| 7 -Table 2- iv- a (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6) |
- |
|
|
|
| 7 -Table 2- iv- b (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6) |
- |
|
|
|
| 7 -Table 2- iv- c (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6) |
- |
|
|
|
| 7 -Table 2- vi (Drying Shrinkage- IS 4031 Part 10) |
- |
|
|
|
| 7 -Table 2- ii- a (Expansion by Le Chatelier- 4031 Part 3) |
- |
|
|
|
| 6 - Table - 1 i (Insoluble residue - Cl 7.4 of IS 4032:1985) |
- |
|
|
|
| 6 - Table - 1 ii (Magnesia - Cl 7.2 of IS 4032:1985) |
- |
|
|
|
| 6 - Table - 1 iii (Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985) |
- |
|
|
|
| 6 - Table - 1 iv (Loss on ignition - Cl 7.1 of IS 4032:1985) |
- |
|
|
|
| 6 - Table - 1 v (Chloride content - Cl 4.13 of IS 4032:1985) |
- |
|
|
|
| 6 - Table - 1 vi ( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985) |
- |
|
|
|
|
- |
-
Mech-Facility not available for transverse strength test( optional); Chem-Declaration for chloride regarding end use of cement (as per Table 1) and declaration of fly ash content & Confirmation for testing Alkali Content required. |
| 14842 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 3195 (1992) |
Steel for the manufacture of volute and helical springs (For Railway Rolling Stock) - Specification (Third Revision) |
- |
1050 Chemical View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7 (Hardness) |
- |
|
|
|
| 11 ( DIMENSIONS AND TOLERANCES) |
- |
|
|
|
| 10 (Freedom from defects) |
- |
|
|
|
| Cl. 3, 6.1, 6.2 & Table 1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 3, 6.1, 6.2 & Table 1 (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 3, 6.1, 6.2 & Table 1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 3, 6.1, 6.2 & Table 1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 3, 6.1, 6.2 & Table 1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 3, 6.1, 6.2 & Table 1 (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
|
- |
-
Excluding Microalloying Elements, Decarburization, Inlusion rating |
| 14843 |
BIS, Central Laboratory (CL)
| None
| IS 15778 (2007) |
Chlorinated polyvinyl chloride (Cpvc) pipes for potable hot and cold water distribution supplies - Specification |
- |
6375 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.3.2
IS 13360 (Part 3/See 1) (Density) |
- |
|
|
|
| 7.1
IS 12235 (Part 1)
Table 2 (Dimension of Pipes:
Mean outside Diameter) |
- |
|
|
|
| 7.1.2
IS 12235 (Part 1)
Table 2 (Wall Thickness ) |
- |
|
|
|
| 9.1 (Visual Appearance) |
- |
|
|
|
| 9.4
IS 12235(Part 5/Sec 1 and Sec 2) (Reversion Test :
When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.) |
- |
|
|
|
| 9.5
IS 12235(Part 2) (Vicat Softening Temperature:
When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen
shall not be less than 110°C.) |
- |
|
|
|
| 9.6
IS 12235(Part 14) (Density) |
- |
|
|
|
| 10.5
IS 12235(Part 13) (Tensile Strength :
When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C.
) |
- |
|
|
|
|
- |
-
Excluding Test Facility Not avaialble for Cl 9.3 Effect on Water,Cl 10.1 Hydraulic Characterstics, Cl 10.2 Thermal Stability,Cl 10.3 Resistance to External Blow, Cl 10.4 Flattering Test.; |
| 14844 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 4270 (2001) |
Steel tubes used for water wells specification (Third Revision) |
- |
Rs.7500/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 9 (Pipe ends, Angle of bevel & Root Face ) |
- |
|
|
|
| Cl 12 (Bituminous Coating & Galvanizing ) |
- |
|
|
|
| Cl 14 (Workmanship) |
- |
|
|
|
| 5.2 (phosphorus) |
- |
|
|
|
| 5.2 (sulphur) |
- |
|
|
|
| Cl 14 (Workmanship) |
- |
|
|
|
|
- |
-
Test facility is complete for Chemical Except HST |
| 14845 |
BIS, Central Laboratory (CL)
| None
| IS 781 (1984) |
Specification for cast copper alloy screw down bib taps and stop valves for water services (Third Revision) |
- |
Rs.2700/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Clause 4.1, Table-1 (Csat Brass LCB-1 of IS 292 1983,Ingots, Cu + Ni) |
- |
|
|
|
| Clause 4.1, Table-1 (Cast Brass Grade DCB - 2 of IS 1264 : 1981, Die Casting, Cu) |
- |
|
|
|
| Clause 4.1, Table-1 (Leaded In Tin Bronze ,LTB-2 of IS 318, Sn) |
- |
|
|
|
| Clause 4.1, Table-1 (Brass, Tyape 1 half Hard of IS 319 : 2007, Grade -1 , Cu) |
- |
|
|
|
| Clause 4.1, Table-1 (Grade HT 1 of IS 320 : 1980, Copper + incidental Nickel) |
- |
|
|
|
| Clause 4.1, Table-1 (Grade FHTB 1 of IS 6912 : 2005, Cu) |
- |
|
|
|
| Clause 4.1, Table-1 (Grade HT 1 of IS 320 : 1980, Total other elements ) |
- |
|
|
|
| Cl 3 (Nominal Size) |
- |
|
|
|
| Cl 5 (Dimensions & Tolerances) |
- |
|
|
|
| Cl 6.1 (CONSTRUCTION AND WORKMANSHIP) |
- |
|
|
|
| Cl 6.3 (CONSTRUCTION AND WORKMANSHIP) |
- |
|
|
|
| Cl 6.4 (CONSTRUCTION AND WORKMANSHIP) |
- |
|
|
|
| Cl 6.5 (CONSTRUCTION AND WORKMANSHIP) |
- |
|
|
|
| Cl 6.6 (CONSTRUCTION AND WORKMANSHIP) |
- |
|
|
|
| Cl 6.7 (CONSTRUCTION AND WORKMANSHIP) |
- |
|
|
|
| Cl 6.8 (CONSTRUCTION AND WORKMANSHIP) |
- |
|
|
|
| Cl 6.11 (CONSTRUCTION AND WORKMANSHIP) |
- |
|
|
|
| Cl 7 (MINIMUM MASS) |
- |
|
|
|
| Cl 8 (Finish) |
- |
|
|
|
| Cl 9 (Testing) |
- |
|
|
|
|
- |
-
Material of component parts test as per table 1 may plese be declared Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;
Excluding all except IS 318 : 1974, IS 320 : 1980; |
| 14846 |
BIS, Central Laboratory (CL)
| None
| IS 8360 : Part 1 (1977) |
fabricated high density polyethylene (HDPE) fittings for potable water supplies: Part 1 General requirements |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1 (DIMENSIONS OF FlTTINGS) |
- |
|
|
|
| 4.2 (DIMENSIONS OF FlTTINGS) |
- |
|
|
|
|
- |
-
- |
| 14847 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 205 (1992) |
Non - Ferrous metal butt specification (Fourth Revision) |
- |
Rs.1500.00 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3 (TYPES) |
- |
|
|
|
| 5.1- Table 2,3,4,5 & Fig-1 & 2 (Dimensions- Type of Hinge 1.Length 2.Breadth 3.Butt Dia 4.Pin Dia 5.Thickness of Flap) |
- |
|
|
|
| 5.1- Table 2,3,4,5 & Fig-1 & 2 (Dimensions- 1. Holes for Screw Desination 2. No. of screw Holes) |
- |
|
|
|
| 6.1 (Manufacture- General) |
- |
|
|
|
| 6.2- Table 2,3,4,5 (Kunckles) |
- |
|
|
|
| 6.3 (Screw Holes) |
- |
|
|
|
| 6.3.1- Table 2,3,4,5 & Fig-1 & 2 (Screw Holes) |
- |
|
|
|
| 6.3.2- Table 2,3,4,5 (Number of Holes) |
- |
|
|
|
| 6.3.3 Fig-1 (Position of Holes) |
- |
|
|
|
| 4.1 -Table 1-Pin- iii (Ref. Cl 6 of IS 280:1978- Cross ref. Cl. 6.1 -Table 1 of IS 7887 : 1992) (Chemical composition - Carbon - IS 228) |
- |
|
|
|
| 4.1 -Table 1-Pin- iii (Ref. Cl 6 of IS 280:1978- Cross ref. Cl. 6.1 -Table 1 of IS 7887 : 1992) (Chemical composition - Manganese - IS 228) |
- |
|
|
|
| 4.1 -Table 1-Pin- iii (Ref. Cl 6 of IS 280:1978- Cross ref. Cl. 6.1 -Table 1 of IS 7887 : 1992) (Chemical composition - Sulphur - IS 228) |
- |
|
|
|
| 4.1 -Table 1-Pin- iii (Ref. Cl 6 of IS 280:1978- Cross ref. Cl. 6.1 -Table 1 of IS 7887 : 1992) (Chemical composition - Phosphorous - IS 228) |
- |
|
|
|
| 4.1 -Table 1-Pin- iii (Ref. Cl 6 of IS 280:1978- Cross ref. Cl. 6.1 -Table 1 Note 2 of IS 7887 : 1992) (Chemical composition - Silicon - IS 228 (optional)) |
- |
|
|
|
| 4.1 -Table 1-Pin- v (Ref. Cl 7.1 -Table 1 of IS 6528 : 1995) (Chemical composition - Carbon - IS 228) |
- |
|
|
|
| 4.1 -Table 1-Pin- v (Ref. Cl 7.1 -Table 1 of IS 6528 : 1995) (Chemical composition - Silicon - IS 228) |
- |
|
|
|
| 4.1 -Table 1-Pin- v (Ref. Cl 7.1 -Table 1 of IS 6528 : 1995) (Chemical composition - Manganese - IS 228) |
- |
|
|
|
| 4.1 -Table 1-Pin- v (Ref. Cl 7.1 -Table 1 of IS 6528 : 1995) (Chemical composition - Sulphur - IS 228) |
- |
|
|
|
| 4.1 -Table 1-Pin- v (Ref. Cl 7.1 -Table 1 of IS 6528 : 1995) (Chemical composition - Phosphorous - IS 228) |
- |
|
|
|
|
- |
-
Excluding Finish Test, Facility for chemical testing is not available |
| 14848 |
BIS, Central Laboratory (CL)
| None
| IS 8088 (2019) |
Tricycle, hand propelled ? specification (First Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1 & Table-1 (Overall length) |
- |
|
|
|
| 4.1 & Table-1 (Overall width) |
- |
|
|
|
| 4.1 & Table-1 (Overall height) |
- |
|
|
|
| 4.1 & Table-1 (Width of foot rest) |
- |
|
|
|
| 4.1 & Table-1 (Length of foot rest) |
- |
|
|
|
| 4.1 & Table-1 (Clearance of foot rest from ground) |
- |
|
|
|
| 4.1 & Table-1 (Arm rest height from seat) |
- |
|
|
|
| 4.1 & Table-1 (Seat length) |
- |
|
|
|
| 4.1 & Table-1 (Seat width) |
- |
|
|
|
| 4.1 & Table-1 (Back height from seat) |
- |
|
|
|
| 4.1 & Table-1 (Length of steering handle) |
- |
|
|
|
| 4.1 & Table-1 (Height of rear wheel supporting frame) |
- |
|
|
|
| 4.1 & Table-1 (Leverage of steering handle) |
- |
|
|
|
| Cl.6.3 of IS 8088 & IS 2414 (Tyres and Tubes) |
- |
|
|
|
| Cl.6.4 of IS 8088 & IS 624 (Wheel Rims) |
- |
|
|
|
| 6.5 (Mudguards) |
- |
|
|
|
| 6.6 (Brakes) |
- |
|
|
|
| 6.7 (Sprocket and Free Wheel) |
- |
|
|
|
| 6.8 (Front Wheel Hub) |
- |
|
|
|
| 6.9 (Rear Wheel Hub) |
- |
|
|
|
| 6.11 (Chain Cover) |
- |
|
|
|
| 6.12 (Armrests) |
- |
|
|
|
| 6.13 (Tool Box) |
- |
|
|
|
| Cl.6.14 of IS 8088 & IS 6799 (Lock) |
- |
|
|
|
| 6.15 (Hood) |
- |
|
|
|
| 6.18 (Accessories) |
- |
|
|
|
| 8.1 (Road test) |
- |
|
|
|
| 8.2 (Manoeuvrability) |
- |
|
|
|
| 8.3 (Static Load Test) |
- |
|
|
|
| 8.5 (Test for Finish) |
- |
|
|
|
| 5.1 of IS 8088 & Cl.5 of IS 2039 (Carbon- Relevant parts of IS 228 or by other instrumental and chemical method) |
- |
|
|
|
| 5.4.2 of IS 8088 & IS 513(Part-1) (Carbon- Relevant parts of IS 228 or by other instrumental and chemical method) |
- |
|
|
|
| 5.4.3 of IS 8088 & IS 277 (Carbon- Relevant parts of IS 228 or by other instrumental and chemical method) |
- |
|
|
|
| 5.4.3 of IS 8088 & IS 513(Part-1) (Carbon- Relevant parts of IS 228 or by other instrumental and chemical method) |
- |
|
|
|
| Cl.5.5 of IS 8088 & IS 4454(Part-1) (Carbon- Relevant parts of IS 228 or by other instrumental and chemical method) |
- |
|
|
|
| 5.1 of IS 8088 & Cl.5 of IS 2039 (Manganese- Relevant parts of IS 228 or by other instrumental and chemical method) |
- |
|
|
|
|
- |
-
- |
| 14849 |
BIS, Central Laboratory (CL)
| None
| IS 778 (1984) |
Specification for 2010 copper alloy gate, globe and check valves for waterworks purposes (Fourth Revision) |
- |
Rs 4500/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6- Table 1-i) (Brass(Body)-Cl 7 and table 1 of IS 1264) |
- |
|
|
|
| 6- Table 1-i) (Leaded tin Bronze(Body)-Cl 3 and table 1 of IS 318) |
- |
|
|
|
| 6- Table 1-ii) (Forged Brass(Bonnet or cover)-Cl 8 , table 3 and FLB of IS 6912) |
- |
|
|
|
| 6- Table 1-iv) (High-tensile brass( stem) - Cl 4.1 and table 1 of IS 320) |
- |
|
|
|
| 4 (Classification ) |
- |
|
|
|
| 7.1.4.1- Table 3 (Diameter of flange - IS 778) |
- |
|
|
|
| 7.1.4.1- Table 3 (Thickness of flange - IS 778) |
- |
|
|
|
| 7.1.4.1- Table 3 (Diameter of Belt circle -IS 778) |
- |
|
|
|
| 7.1.4.1- Table 3 (No. of holes - IS 778) |
- |
|
|
|
| 7.1.4.1- Table 3 (Diameter of holes -IS 778) |
- |
|
|
|
| 7.2.2 (Bonnet Flanges - IS 778) |
- |
|
|
|
| 7.1.3.1 (Screwed Body End -IS 778) |
- |
|
|
|
|
- |
-
complete |
| 14850 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 204 : Part 2 (1992) |
Tower bolts - Specification: Part 2 non - Ferrous metals (Fifth Revision) |
- |
Rs.2100.00. View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1 (General) |
- |
|
|
|
| 5.2.1 Table 1 (Particulars-Barrel Tower Bolts) |
- |
|
|
|
| 5.2.2 Table 2 (Particulars-Skeleton Tower Bolts) |
- |
|
|
|
| 6.1- Table 1 (Dimension of Barrel tower bolts-1.Size 2.Length of Bolt or Barrel-(A or B) 4.Width of Barrel-C 5.Dia of Bolt-D 6.Length of Socket-E 7.Thickness of Metal of Barrel (Brass or Zink Alloy/Aluminium alloy/Sheet Brass)-F 8.Dia of bore of barrel or socket- G ) |
- |
|
|
|
| 6.1- Table 1 (Dimension of barrel tower bolts-Minimum No. of equally Spaced holes in Barrel & Socket for wooden screw no 6) |
- |
|
|
|
| 6.2- Table 2 (Dimension of Skeleton Tower Bolts 1.Size 2.Length of Bolt -A 3.Length of Bolt Plate -B 4.Width of Bolt Plate or Staple-C 5.Dia of Bolt-D 6.Length of Staple-E 7.Thickness of Plate or Socket (Brass /Aluminium alloy or Zink Alloy)-F 8.Dia of bore of Plate or Staple-G 9.Dia of shank of Knob ) |
- |
|
|
|
| 6.2- Table 2 (Dimension of Skeleton Tower Bolts- Nos of Staples) |
- |
|
|
|
| 6.2- Table 2 (Dimension of Skeleton Tower Bolts-Minimum No. of Screw holes for wood screw no 4) |
- |
|
|
|
|
- |
-
Except Finish Test, Facility for chemical testing is not available |
