BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15546 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

15241

BIS, Northern Regional Laboratory (NRL)

None

IS 9523 (2000)

Ductile iron fittings for pressure pipes for water, gas and sewage - Specification (First Revision)

Rs.7245.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5 (Thickness)	-
Cl 6 & Table 4,5,6&7 (Design & Tolerance)	-
Cl 9 (Tensile Test & Hardness Test)	-
Cl 10 (Hydrostatic Test)	-
Cl 11 (Nominal Diameter, Ovality, Dimensions, No. Of Holes & Bolt Sizes)	-
Cl 13 (Coating)	-

-
1 coated, 1 uncoated and separate sample for tensile and hardness test are required Except HST for DN above 300 mm

15242

BIS, Northern Regional Laboratory (NRL)

None

IS 7098 : Part 2 (2011)

Crosslinked polyethylene insulated thermoplastic sheathed cables - Specification: Part 2 for working voltages from 3.3 kV up to and including 33 kV (Second Revision)

Rs. 33750/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
20.13 (Test for Halogen Acid Gas Evolution)	-
4.1 (CONDUCTOR)	-
4.1.1 (CONDUCTOR)	-
5 (INSULATION)	-
6 (SCREENING)	-
6.1.1 (SCREENING : - Non-metallic — Semiconducting Compound)	-
6.1.2 (SCREENING : - Non-magnetic Metallic Tape for Single Core Unscreened and Unarmoured Cables)	-
7 (FILLERS AND INNER SHEATH)	-
8.1 (ARMOURING)	-
8.2 (ARMOURING)	-
9 (OUTER SHEATH )	-
10.1 (CONDUCTOR)	-
10.2 (CONDUCTOR)	-
11 (CONDUCTOR SCREENING)	-
12.1 (INSULATION)	-
12.2 (INSULATION : Thickness of Insulation)	-
12.3 (INSULATION : Tolerance on Thickness of Insulation)	-
12.4 (Eccentricity and Ovality)	-
12.5 (INSULATION : Application of Insulation)	-
13.1 (INSULATION SCREENING)	-
13.2 (INSULATION SCREENING)	-
13.3 (INSULATION SCREENING)	-
13.4 (INSULATION SCREENING)	-
14.1 (CORE IDENTIFICATION)	-
14.1.1 (CORE IDENTIFICATION)	-
15.1 (LAVING UP OF CORES)	-
16.1 (INNER SHEATH (COMMON COVERING))	-
16.2 (INNER SHEATH (COMMON COVERING))	-
16.2.1 (INNER SHEATH (COMMON COVERING))	-
16.3 (INNER SHEATH (COMMON COVERING) : Thickness of Inner Sheath)	-
16.3.1 (INNER SHEATH (COMMON COVERING) : Thickness of Inner Sheath)	-
17.1 (ARMOURING : Application )	-
17.1.1 (ARMOURING )	-
17.1.2 (ARMOURING )	-
17.1.3 (ARMOURING )	-
17.2 (ARMOURING : Type of armour )	-
17.2.1 (ARMOURING : Type of armour )	-
17.2 (ARMOURING : Coverage )	-
17.3 (ARMOURING : Dimension )	-
17.4 (ARMOURING : Joints)	-
16.4 (ARMOURING : Resistance)	-
18.1 (OUTER SHEATH)	-
18.2 (OUTER SHEATH: Colour)	-
18.3 (Thicknes of outer sheath : average )	-
18.3 (Thicknes of outer sheath : minimum )	-
19.1 i) a) (Annealing test (for copper))	-
19.1 i) b) (Tensile test (for aluminium) - Before stranding )	-
19.1 i) b) (Tensile test (for aluminium) - After stranding )	-
19.1 i) c) (Wrapping test ( for aluminium))	-
19.1 i) d) (Resistance test - Main conductor )	-
19.1 i) d) (Resistance test - Neutral conductor )	-
19.1 iii) a) (Phyaical tests for insulation : Tensile Test)	-
19.1 iii) a) (Phyaical tests for insulation : Elongation )	-
19.1 iii) b) (Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-
19.1 iii) b) (Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-
19.1 vi) b) (Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-
19.1 iii) b) (Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-
19.1 iii) d) (Phyaical tests for insulation : Hot set )	-
19.1 iii) d) (Phyaical tests for insulation : Permanent set )	-
19.1 iii) e) (Phyaical tests for insulation : Shrinkage )	-
19.1 iii) e) (Phyaical tests for insulation : Shrinkage - Crack observed )	-
19.1 iii) f) (Insulation: Waterabsorption(gravimetric))	-
19.1 v) b) (Volume resistivity)	-
19.1 vi) a) (Physical tests for outer sheath : Tensile stregth )	-
19.1 vi) a) (Physical tests for outer sheath : Elongation )	-
19.1 vi) b) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-
19.1 iii) a) (Phyaical tests for insulation : Tensile Test)	-
19.1 vi) b) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-
19.1 vi) b) (Physical tests for outer sheath -Ageing in air oven : Elongation )	-
19.1 vi) b) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-
19.1 vi) b) (Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-
19.1 vi) c) (Phyaical tests for Sheath : Shrinkage )	-
19.1 vi) c) (Phyaical tests for Sheath : Shrinkage - Crack observed )	-
19.1 vi) d) (Sheath : Hot deformation)	-
19.1 vi) e) (Loss of massIn air oven)	-
19.1 vi) f) (Sheath : Heat shock test)	-
19.1 vi) g) (Sheath : Thermalstability)	-
20.7 (High voltage test)	-
20.8 (Flammability test)	-
20.1 (Oxygen Index Test)	-
20.11 (Flame Retardance Test on Single Cables)	-
20.12 (Flame Retardance Test on Bunched Cables)	-
20.14 ( Test for Smoke Density)	-
20.15 (Temperature Index)	-
21.1 (IDENTIFICATION : Manufacturer's Identification)	-
21.2 (IDENTIFICATION : Cable Identification)	-
21.3 (IDENTIFICATION : Cable Code)	-
Cl.8 & 17 (Armouring : Tensile Strength)	-
Cl.8 & 17 (Armouring : Elongation)	-
Cl.8 & 17 (Armouring : Torsion Test (For Round Steel Wire Only))	-
Cl.8 & 17 (Armouring: Winding Test ( For formed steel wire only))	-
Cl.8 & 17 (Armouring : Application)	-
Cl.8 & 17 (Armouring : Uniformity of Zinc Coating)	-
Cl.8 & 17 (Armouring: Mass of Zinc Coating)	-
Cl.8 & 17 (Armouring : Resistivity Test)	-
Cl.8 & 17 (Armouring: Cold Impact Test (For outer Sheath))	-
Cl. 13.5.1 and Table 7 (Armouring: Resistance Test for Armouring (Other than Mining Cables))	-
Cl-20.16 (Amendment No-2) (Longitudinal Water Penetration Test)	-

-
Test facility is complete for Chemical Except Cl.20.9 Ageing Test on complete cable, Cl.20.2 Partial discharge, impulse , Cl.20.7 HVT(above 10 kV), Cl.20.3 bending test ,Cl.20.4 Dielectric power factor test ,Cl.20.5 Heat Cycle test,Cl.20.6 Impulse withstand test

15243

BIS, Western Regional Laboratory (WRL)

None

IS 8783 : Part 4 : Sec 3 (1995)

Winding wires for submersible motors - Specification: Part 4 specification for individual wires: Sec 3 polyester and polypropylene insulated winding wires (First Revision)

Rs.8700/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (The winding wire shall either be wound on spools / reels conforming to IS 482-1981. or supplied in a coils packed and labelled.)	-
6.1 (The winding wire shall carry following information marked on the lable on spool / reel / coil;)	-
6.1 (a) Reference to this Indian Standard;)	-
6.1 (b) Manufacturer's name,brand name or trade-mark;)	-
6.1 (c) Size of conductor / maximum overall diameter,)	-
6.1 (d) Length of conductor on spool / reel /coil;)	-
6.1 (e) Number of lengths onspool / reel / coil (if more than one);)	-
6.1 (f) Country of Manufacturer)	-
6.1 (g) Year of Manufacture.)	-
6.2 (BIS Certification Mark)	-
4 (i) Material)	-
5 (ii) Diameter [mm] Seperate wire:)	-
5 (ii) Diameter [mm] Wire taken from cable:)	-
5 (iii) Annealing test [Percentage] on Seperate wire:)	-
5 (iii) Annealing test [Percentage] on Wire taken from cable:)	-
5 (d) Resistance test [Ohm/km corrected to 20°c)	-
4.1, table 1 & 2 (a) Thickness of Polyster (mm))	-
4.1, table 1 & 3 (b) Thickness of Polypropylene (mm))	-
4.1, table 1 & 4 (c) Total thickness of Insulation(mm))	-
4.2 (Application of insulation)	-
4.3 (Colour of Insuation)	-
4.4 (Overall diameter (mm))	-
4 (Before ageing Tensile strength [N/mm²])	-
4 (Before ageing Elongation at break [Percentage])	-
4 (After ageing Tensile strength [N/mm²])	-
4 (Variation on tensile strangth [Percentage])	-
4 (After ageing Elongation at break [Percentage])	-
4 (Variation on elongation at break [Percentage])	-
4 (Shrinkage test [Percentage])	-
4 (After Shrinkage Cracks found.)	-
4.1 (Water absorption test [Gravimetric] [mg/cm²])	-
4.5 (High Voltage test [Water Immersion test] 3 KV for 1 Minute)	-
5 (The winding wire shall either be wound on spools / reels conforming to IS 482-1981. or supplied in a coils packed and labelled.)	-
6 (The winding wire shall carry following information marked on the lable on spool / reel / coil;)	-
6 (a) Reference to this Indian Standard;)	-
6 (b) Manufacturer's name,brand name or trade-mark;)	-
6 (c) Size of conductor / maximum overall diameter,)	-
6 (d) Length of conductor on spool / reel /coil;)	-
6 (e) Number of lengths onspool / reel / coil (if more than one);)	-
6 (f) Country of Manufacturer Marking)	-
6 (g) Year of Manufacture.)	-
6.2 (BIS Certification Mark)	-

-
The following test facilities for clauses are not available: Cl 4.1 Thickness of Insulation (Separate measurement of Thickness of Polypropylene and Polyester)

15244

BIS, Northern Regional Laboratory (NRL)

None

IS 1875 (1992)

Carbon steel billets, blooms, slabs and bars for forgings - Specification (Fifth Revision)

Rs.5400/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 (Diameter, Ovality & Weight)	-
Cl 9 (UTM & HBW)	-
Cl 7 (Workmanship)	-
6.1, 6.2 (carbon)	-
6.1, 6.2 (sulphur)	-
6.1, 6.2 (silicon )	-
6.1, 6.2 (manganese)	-
6.1, 6.2 (phosphorus)	-

-
Excluding Grain size, Microstructure,Microalloying Elements

15245

BIS, Western Regional Laboratory (WRL)

None

IS 8783 : Part 4 : Sec 1 (1995)

Winding wires for submersible motors - Specification: Part 4 specification for indmdual wires: Sec 1 HR PVC insulated wires (First Revision)

9300/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.3.1 (Conductor)	-
Cl.4 (Material)	-
Cl.5.1.1 (Dimensions)	-
Cl. 6 (Annealing Test)	-
Cl 6 (Resistance Test)	-
Cl 4.1.2 (Visual examination)	-
Cl.3.2 (Dielectric Material )	-
Cl. 4 Table 1of IS: 8783 (part 2) (Volume resistivity)	-
Cl. 4 Table 1of IS: 8783 (part 2) (Volume resistivity)	-
Cl. 4 Table 1of IS: 8783 (part 2) (Tensile strength )	-
Cl. 4 Table 1of IS: 8783 (part 2) (Elongation)	-
Cl. 4 Table 1of IS: 8783 (part 2) (Tensile Strength)	-
Cl. 4 Table 1of IS: 8783 (part 2) (Variation)	-
Cl. 4 Table 1of IS: 8783 (part 2) (Elongation at Break )	-
Cl. 4 Table 1of IS: 8783 (part 2) (Variation)	-
Cl. 4 Table 1of IS: 8783 (part 2) (Shrinkage test )	-
Cl. 4 Table 1of IS: 8783 (part 2) (Shrinkage test )	-
Cl. 4 Table 1of IS: 8783 (part 2) (Water absorption (Gravimetric) )	-
Cl. 4 Table 1of IS: 8783 (part 2) (Hot deformation Test )	-
Cl. 4 Table 1of IS: 8783 (part 2) (Heat shock Test )	-
Cl.4.1 (Insulation )	-
Cl.4.2 (Application)	-
Cl.4.3 (Colour)	-
Cl.4.4 (Overall Diameter)	-
Cl.4.5 (Finish)	-
Cl.4.6 (High Voltage Test Water Immersion )	-

-
-

15246

BIS, Eastern Regional Laboratory (ERL)

None

IS 15911 (2010)

Structural steel (Ordinary Quality) - Specification

All grades

Rs 6750/- For elements other than Table-1: Rs 1004/- pe View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Table-1, 5.1, 8.1 & 8.2 (Carbon: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
Table-1, 5.1, 8.1 & 8.2 (Sulphur: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
Table-1, 5.1, 8.1 & 8.2 (Phosphorous: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
Table-1, 5.1, 8.1 & 8.2 (Manganese: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
Table-1, 5.1, 8.1 & 8.2 (Silicon: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
Table-1, 5.1, 8.1 & 8.2 (Copper: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
Table-1, 5.1, 8.1 & 8.2 (Nitrogen: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
5 and 10.3.1 (Tensile strength. IS 1608)	-
5 and 10.3.1 (Yield Stress. IS 1608)	-
5 and 10.3.1 (Percentage Elongation. . IS 1608)	-
11.3 ( Bend Test. IS 1599)	-
Cl 12 of IS 15911 and Table 2.1 of IS 808 (D)	-
Cl 12 of IS 15911 and Table 2.1 of IS 808 (B)	-
Cl 12 of IS 15911 and Table 2.1 of IS 808 (t)	-
Cl 12 of IS 15911 and Table 2.1 of IS 808 (R1)	-
Cl 12 of IS 15911 and Table 2.1 of IS 808 (R2)	-
Cl 12 of IS 15911 and Table 2.2 of IS 808 (Mass. IS 808)	-
7 (Freedom from defects)	-
Cl 12 of IS 15911 and Table 1 of IS 1732 (Clauses 3.1, 4.1,4.1.1 and Table 1 of IS 1732)	-
Cl 12 of IS 15911 and Table 2 of IS 1732 (Clauses 3.1, 4.1,4.1.1 and Table 1 of IS 1732)	-
Cl 12 of IS 15911 and Table 2 of IS 1863 (Clauses 5.1 and Table 2 of IS 1863)	-
Cl 12 of IS 15911 and Table 1 of IS 3954 (Clauses 4, 6.1 and Table 2 of IS 3954)	-
Cl 12 of IS 15911 and Table 1 of IS 1173 (Clauses 3.1 , 5.1 and Table 1 of IS 1173)	-
Cl 12 of IS 15911 and Table 1 of IS 1252 (Clauses 4.1 , 6.1 and Table 1 of IS 1252)	-
Table-1, 5.1, 8.1 & 8.2 (Aluminium: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
Table-1, 5.1, 8.1 & 8.2 (Niobium: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
Table-1, 5.1, 8.1 & 8.2 (Vanadium: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
Table-1, 5.1, 8.1 & 8.2 (Titanium: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
Table-1, 5.1, 8.1 & 8.2 (Boron: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
Table-1, 5.1, 8.1 & 8.2 (Nickel: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
Cl 5, 8.1 & 8.2 , table 1 (Carbon equivalent)	-
Cl 5, 8.1 & 8.2 , table 1 (Total microalloying elements(Nb+V+Ti+B))	-

-
Grade designation to be declared. Type of killed material to be indicated. Requirement for testing of Nitrogen and Copper to be indicated.

15247

BIS, Northern Regional Laboratory (NRL)

None

IS 4224 (1972)

Specification for steel wire for staples, pins and clips (First Revision)

525 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5 (Sizes and Tolerances - IS 4224)	-
7.1 (Tensile Test - IS 1608(Pt -1))	-
4 (Freedom from defects , IS 4224)	-
7.2 (Reverse Bend Test--IS 1716)	-

-
Test facility is complete

15248

BIS, Western Regional Laboratory (WRL)

None

IS 7098 : Part 1 (1988)

Specification for crosslinked polyethylene insulated pvc sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision)

Except C1 & C2 category.

26250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 (CONDUCTOR: MATERIALS)	-
4 (INSULATION : MATERIALS)	-
5.1 (FILLER AND INNER SHEATH)	-
5.2 (FILLER AND INNER SHEATH)	-
6 (ARMOURING)	-
7 (OUTER SHEATH)	-
8.1 (CONDUCTOR: CONSTRUCTION)	-
8.2 (PROTECTIVE BARRIER)	-
8.3 (SIZE OF NEUTRAL CONDUCTOR)	-
9.1 (Insulation Applied by extrusicn)	-
9.2 (Thickness of Insulation - Average)	-
9.3 (Thickness of Insulation - Minimum)	-
9.4 (Application of Insulation)	-
10.1 (Core Identification)	-
10.2 (Core Identification- Neutral)	-
10.3 (Core Identification by number )	-
10.4 (Core Identification by number - Neutral )	-
11 (LAVING UP OF CORES)	-
12.1 & 12.2 (Inner sheath : Application)	-
12.3 (Thickness of Inner Sheath)	-
13.1 (Armouring: Application)	-
13.1.2 (Armouring: Coverage )	-
13.1.3 (Armouring: Direction of Lay )	-
13.2 (Type of armour )	-
13.3 (Armouring : Dimensions -Wire Diameter)	-
13.4 (Armour: Joint)	-
13.5 (Armouring : Resistance Test)	-
13.6 a) (ARMOURING: Tensile Strength)	-
13.6 b) (ARMOURING: Elongation )	-
13.6 c) (ARMOURING: Torsion Test (For round wire ) )	-
13.6 d) (ARMOURING: Winding Test(For formed wire))	-
13.6 e) (ARMOURING: Uniformity of zinc coating)	-
13.6 f) (ARMOURING: Mass of zinc coating )	-
13.6 g) (ARMOURING: Resistivity)	-
14.1 (Outer Sheath : Application)	-
14.2 (Colour of outer sheath)	-
14.3 (Thickness of outer sheath - AVERAGE)	-
14.3 (Thickness of outer sheath - minimum)	-
15.1 a) i) (Annealing Test ( For copper wire ) )	-
15.1 a) ii) (Tensile test (for aluminium) - Before stranding )	-
15.1 a) ii) (Tensile test (for aluminium) - After stranding )	-
15.1 a) iii) (Wrapping test (for aluminium))	-
15.1 a) iv) (Resistance test - Main conductor)	-
15.1 a) iv) (Resistance test - Neutral conductor)	-
15.1 d) i) (Phyaical tests for insulation : Tensile Test)	-
15.1 d) i) (Phyaical tests for insulation : Elongation)	-
15.1 d) ii) (Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-
15.1 d) ii) (Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-
15.1 d) iii) (Phyaical tests for insulation : Hot set )	-
15.1 d) iii) (Phyaical tests for insulation : Permanent set )	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage )	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage - Crack observed )	-
15.1 d) v) (Insulation: Waterabsorption(gravimetric))	-
15.1 e) i) (Physical tests for outer sheath : Tensile stregth)	-
15.1 e) i) (Physical tests for outer sheath : Elongation)	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation )	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation )	-
15.1 e) iii) (Sheath: Loss of mass in air oven)	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage )	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage - Crack observed )	-
15.1 e) v) (Sheath : Hot deformation)	-
15.1 e) vi) (Sheath : Heat shock test)	-
15.1 e) vii) (Sheath : Thermalstability)	-
15.1 f) (INSULATION RESISTANCE TEST : Volume resistivity )	-
16.2 (HIGH VOLTAGE TEST )	-
16.3 (FLAMMABILITY TEST : Period of Burning )	-
16.3 (FLAMMABILITY TEST : Unaffected length )	-
17.1 (Manufacturer'. identification)	-
17.2 (cable Indentification )	-
17.3 (cable Code )	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-

-
Test facility not available for tests as per Clause 15.1.1 of C1 and C2 category

15249

BIS, Western Regional Laboratory (WRL)

None

IS 4250 (1980)

Specification for domestic electric food - Mixers (Liquidizers And Grinders) (First Revision)

Rs. 32600/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 (Classification- IS 302-1 )	-
6 (Classification- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.2 (Marking)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.4 (Marking)	-
7.5 (Marking)	-
7.6 (Marking)	-
8 ( Protection Against Electric Shock, IS 302-1)	-
9 (Starting, IS 302-1)	-
10 (Power Input and Current, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
13 (Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-
13 (Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-
15.1 (Moisture Resistance, IS 302-1)	-
15.2 (Moisture Resistance-Spillage test)	-
15 (Moisture Resistance, IS 302-1)	-
16 (Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-
16 (Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-
19 (Abnormal Operation, IS 302-1)	-
19 (Abnormal Operation, IS 302-1)	-
19 (Abnormal Operation, IS 302-1)	-
19 (Abnormal Operation, IS 302-1)	-
20 (Stability & Mechanical Hazards, IS 302-1)	-
20 (Stability & Mechanical Hazards, IS 302-1)	-
21 (Mechanical Strength, IS 302-1)	-
21 (Mechanical Strength, IS 302-1)	-
22.1 (Construction, IS 302-1)	-
22.2 (Construction)	-
22.3 (Construction)	-
22.4 (Construction)	-
22.5 (Construction)	-
22.6 (Construction)	-
22.8 (Construction)	-
22.9 (Construction)	-
22.1 (Construction)	-
23 (Internal Wiring, IS 302-1)	-
23 (Internal Wiring, IS 302-1)	-
23 (Internal Wiring, IS 302-1)	-
23 (Internal Wiring, IS 302-1)	-
23 (Internal Wiring, IS 302-1)	-
23 (Internal Wiring, IS 302-1)	-
23 (Internal Wiring, IS 302-1)	-
23 (Internal Wiring, IS 302-1)	-
23 (Internal Wiring, IS 302-1)	-
23 (Internal Wiring, IS 302-1)	-
24.1 (Components, IS 302-1)	-
24.1 (Components, IS 302-1)	-
24.1 (Components, IS 302-1)	-
24.2 (Components)	-
24.4 (Components)	-
24.7 (Components)	-
24.8 (Components)	-
24.9 (Components)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
26 (Terminals for External Conductors, IS 302-1)	-
27 (Provision for Earthing, IS 302-1)	-
27 (Provision for Earthing, IS 302-1)	-
27 (Provision for Earthing, IS 302-1)	-
27 (Provision for Earthing, IS 302-1)	-
27 (Provision for Earthing, IS 302-1)	-
28 (Screws & Connections, IS 302-1)	-
29 (Clearances and Distances through Insulation, IS 302-1)	-
29 (Clearances and Distances through Insulation, IS 302-1)	-
30 (Resistance to Heat, Fire, Tracking, IS 302-1)	-
30 (Resistance to Heat, Fire, Tracking, IS 302-1)	-
31 (Resistance of Rusting, IS 302-1)	-
34.2 (Operational tests- Grinding coffee (for machines which have a dry grinding arrangement))	-
34.2 (Operational tests- Grinding coffee (for machines which have a dry grinding arrangement))	-
34.2 (Operational tests- Grinding coffee (for machines which have a dry grinding arrangement))	-
34.3 (Whisking egg whites )	-
34.4 (IDLI batter-Grinding of black gram)	-
34.4 (IDLI batter-Grinding of rice)	-
34.4 (IDLI batter-Grinding of rice)	-
34.4 (IDLI batter-Grinding of rice)	-
34.5.1 (a) (Operational test for juicers )	-
34.5.1 (b) (Operational test for juicers )	-
34.5.2 (Operational test for juicers )	-
35 (Temperature withstand test for bowl)	-
36 (Test for controls )	-
37 (Strength of Assembly )	-
37 (Strength of Assembly )	-

-
The following test facilities are not available: 1. Cl.14 Transient Overvoltage test (as per IS 302-1) 2. Cl.19.11 and 19.12 Abnormal Operation test (as perIS 302-1) (for electronic circuit) 3. Cl 24 component test as per IS302-1

15250

BIS, Western Regional Laboratory (WRL)

None

IS 3975 (1999)

Low carbon galvanized steel wires, formed wires and tapes for armouring of cables - Specification (Third Revision)

Rs 2700/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 6.1, Table-1 (Sulphur)	-
Clause 6.1, Table-1 (Phosphorus)	-
9.1 (Galvanizing Requirements )	-
14 (a) (Marking)	-
14 (b) (Marking)	-
14 (c) (Marking)	-
14 (d) (Marking)	-
14 (e) (Marking)	-
14 (f) (Marking)	-
14 (g) (Marking)	-
14.2 (Marking)	-
7 (Dimensions)	-
7 (Dimensions)	-
7 (Dimensions)	-
7 (Dimensions)	-
7 (Dimensions)	-
11 (Freedom from defects)	-
9.1 (Galvanizing Requirements )	-
9.2 (Galvanizing Requirements )	-
9.3 (Galvanizing Requirements )	-
8.1 (Mechanical Properties (as per table 5 of IS 1608))	-
8.1 (Mechanical Properties (as per table 5 of IS 1608))	-
8.2 (Mechanical Properties (as per IS 1717))	-
8.3 (Mechanical Properties (as per IS 1755))	-
8.4 (Mechanical Properties (as per IS 10810(Part- 42)))	-
14 (Marking)	-
14 (b) (Marking)	-

-
Test facility not available for the following: 1) Dimension radius R of formed wire.

15251

BIS, Central Laboratory (CL)

None

IS 12176 (1987)

Specification for sweetened ultra high temperature (UHT) treated condensed milk

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1.10.1 (Bacterial spores ( plate count ))	-
4.1.10.2 (Coliform count)	-
4.1.10.3 (Coagulase positive Staphylococcus aureus)	-

-
-Animal House; Excluding -MEASUREMENT OF SIZE AND COUNT OF LACTOSE CRYSTALS, Cl. 4.1.10.1;

15252

BIS, Western Regional Laboratory (WRL)

None

IS 2465 (1984)

Specification for cables for motor vehicles (Second Revision)

Complete test facility for PVC Insulated General Wiring

Single core PVC Insulated Unsheathed: Rs. 11030/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1 (Insulation)	-
7.3 (Insulation)	-
8 (Core Identification)	-
9 (Laying up of cores)	-
10.1.1 (Sheathing )	-
10.2 (Sheathing )	-
3 & 6 (Flexibility class)	-
3 & 6 (Construction)	-
3 & 6 (Diameter of wire(mm))	-
3 & 6 (Annealing test)	-
3 & 6 (Persulphate Test)	-
3 & 6 (Conductor resistance Test (ohm/km at 20˚c))	-
7.2, 10.3, 11 (Dimensions & thickness )	-
7.2, 10.3, 11 (Dimensions & thickness )	-
7.2, 10.3, 11 (Overall Dimension (mm))	-
4.2 & 12.1 (Without Ageing For Insulation Tensile Strength (N/mm²))	-
4.2 & 12.1, (f), 1 (elongation at break (N/mm²))	-
4.2 & 12.1, (f), 1 (Tensile Strength at break (N/mm²))	-
4.2 & 12.1, (e), 1 (elongation test at break)	-
4.2 & 12.1, (e), 1 (Tensile strength at break)	-
4.2 & 12.1, (f), 2 (Ageing in air oven)	-
4.2 & 12.1, (f), 3 (Ageing in oxygen bomb)	-
4.2 & 12.1, (e), 2 (After Ageing in air oven)	-
4.2 & 12.1, (e), 3 (Loss of mass test (mg/cm²) of Insulation)	-
4.2 & 12.1, (e), 3 (Loss of mass test (mg/cm²) of Sheath)	-
4.2 & 12.1, (e), 4 (Hot deformation test (%) of Insulation)	-
14 (High Voltage Test)	-
15 (SPARK TEST FOR SINGLE CORE GENERAL WIRING CABLES)	-
18.1 (EFFECT OF HEAT ON FLEXIBILITY FOR IGNITION CABLES)	-
19.2 (EFFECT OF OIL ON IGNITION CABLES)	-
20.3 (EFFECT OF LUBRICATING OIL)	-
20.3 (EFFECT OF LUBRICATING OIL)	-
20.3 (EFFECT OF BRAKE FLUID)	-
20.3 (EFFECT OF BRAKE FLUID)	-
20.3 (EFFECT OF DIESEL)	-
20.3 (EFFECT OF DIESEL)	-
20.3 (Wrapping test)	-
21.1 (EFFECT OF COOLING ON FLEXIBILITY)	-
21.2 (EFFECT OF COOLING ON FLEXIBILITY)	-
21.2 (EFFECT OF COOLING ON FLEXIBILITY)	-
22.1 (FLAMMABILITY TEST)	-
22.1 (FLAMMABILITY TEST)	-
23.1 (Manufacturer's Identification)	-
23.1 (Manufacturer's Identification)	-
24.1 (PACKING AND MARKING)	-
24.2 (PACKING AND MARKING)	-
24.2.1 (PACKING AND MARKING)	-
4.2 & 12.1, (e), 4 (Hot deformation test (%) of Sheath)	-
4.2 & 12.1, (e), 5 (Heat Shock Test of Insulation)	-
4.2 & 12.1, (e), 5 (Heat Shock Test of Sheath)	-
4.2 & 12.1, (e), 6 (Shrinkage Test (%) of Insulation)	-
4.2 & 12.1, (e), 6 (Shrinkage Test (%) of Sheath)	-

-
The following test facilities for ignition cables are not available: Cl 16 Capacitance, Cl 17 Ozone resistance, Cl 18 Effect of heat on flexibility, Cl 19 Effect of Oil test

15253

BIS, Western Regional Laboratory (WRL)

None

IS 1293 (2019)

Plugs and socket - Outlets of rated Voltage up to and including 250 Volts and rated current up to and including 16 amperes - Specification (Third Revision)

UP TO 16A, 250V

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 (RATINGS)	-
7.1.1 (Accessories Classification)	-
7.1.2 (Accessories Classification)	-
7.1.3 (Accessories Classification)	-
7.1.4 (Accessories Classification)	-
7.1.5 (Accessories Classification)	-
7.2.1 (Socket-Outlets Classification)	-
7.2.2 (Socket-Outlets Classification)	-
7.2.3 (Socket-Outlets Classification)	-
7.2.4 (Socket-Outlets Classification)	-
7.3 (Plug Classification)	-
8 (Marking)	-
9 (CHECKING OF DIMENSIONS)	-
10 (PROTECTION AGAINST ELECTRIC SHOCK)	-
11 (Provision for earthing)	-
12 (terminals)	-
13.1 (Construction of fixed Socket Outlets)	-
13.2 (Construction of fixed Socket Outlets)	-
13.3 (Construction of fixed Socket Outlets)	-
13.4 (Construction of fixed Socket Outlets)	-
13.5 (Construction of fixed Socket Outlets)	-
13.6 (Construction of fixed Socket Outlets)	-
13.7 (Construction of fixed Socket Outlets)	-
13.8 (Construction of fixed Socket Outlets)	-
13.9 (Construction of fixed Socket Outlets)	-
13.10 (Construction of fixed Socket Outlets)	-
13.11 (Construction of fixed Socket Outlets)	-
13.12 (Construction of fixed Socket Outlets)	-
13.13 (Construction of fixed Socket Outlets)	-
13.14 (Construction of fixed Socket Outlets)	-
13.15 (Construction of fixed Socket Outlets)	-
13.16 (Construction of fixed Socket Outlets)	-
13.17 (Construction of fixed Socket Outlets)	-
13.18 (Construction of fixed Socket Outlets)	-
13.19 (Construction of fixed Socket Outlets)	-
13.2 (Construction of fixed Socket Outlets)	-
13.21 (Construction of fixed Socket Outlets)	-
13.22 (Construction of fixed Socket Outlets)	-
13.23 (Construction of fixed Socket Outlets)	-
14.1 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-
14.2 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-
14.3 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-
14.4 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-
14.5 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-
14.6 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-
14.7 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-
14.8 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-
14.9 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-
14.10 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-
14.11 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-
14.12 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-
14.13 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-
14.14 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-
14.15 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-
14.16 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-
14.17 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-
14.18 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-
14.19 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-
14.20 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-
14.21 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-
14.22 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-
14.23 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-
14.24 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-
14.25 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-
14.26 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-
15 (INTERLOCKED SOCKET-OUTLETS)	-
16.1 (Resistance to Ageing)	-
16.2 (RESISTANCE TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-
16.3 (Resistance to Humidity)	-
17.1 (RESISTANCE AND ELECTRIC STRENGTH)	-
17.2 (INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-
17.3 (INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-
18 (OPERATION OF EARTHING CONTACTS)	-
19 (TEMPERATURE RISE)	-
20 (Making & Breaking Capacity)	-
21 (Normal Operation)	-
22.1 (Verification of the Maximum Withdrawal Force)	-
22.2 (Verification of Minimum Withdrawal Force)	-
23.1 (FLEXIBLE CABLES AND THEIR CONNECTION)	-
23.2 (FLEXIBLE CABLES AND THEIR CONNECTION)	-
23.3 (FLEXIBLE CABLES AND THEIR CONNECTION)	-
23.4 (FLEXIBLE CABLES AND THEIR CONNECTION)	-
24.1 (MECHANICAL STRENGTH For all kinds of fixed socketoutlets)	-
24.1 (MECHANICAL STRENGTH For portable multiple and combined socket outlets with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-
24.1 (MECHANICAL STRENGTH For surface mounting boxes)	-
24.2 (MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-
24.2 (MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-
24.2 (MECHANICAL STRENGTH For plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-
24.2 (MECHANICAL STRENGTH For plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-
24.3 (MECHANICAL STRENGTH for fixed socket-outlets with a main part intended to be mounted directly on a surface)	-
24.4 (MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-
24.4 (MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-
24.5 (MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-
24.5 (MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-
24.5 (MECHANICAL STRENGTH For Plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-
24.6 (MECHANICAL STRENGTH For screwed glands of accessories having an IP code higher than IP20)	-
24.7 (MECHANICAL STRENGTH For plug pins provided with insulating sleeves)	-
24.8 (MECHANICAL STRENGTH For shuttered socketoutlets)	-
24.9 (MECHANICAL STRENGTH For portable multiple and combined socket outlets (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-
24.9 (MECHANICAL STRENGTH For portable multiple and combined socket outlets (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-
24.10 (MECHANICAL STRENGTH For Plug (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-
24.10 (MECHANICAL STRENGTH For Plug (1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-
24.11 (MECHANICAL STRENGTH For portable socketoutlets having means for suspension on a wall)	-
24.12 (MECHANICAL STRENGTH For portable socketoutlets having means for suspension on a wall)	-
24.13 (MECHANICAL STRENGTH For portable socketoutlets having means for suspension on a wall)	-
24.14.1 (MECHANICAL STRENGTH For fixed socket-outlets)	-
24.14.2 (MECHANICAL STRENGTH For fixed socket-outlets)	-
24.14.3 (MECHANICAL STRENGTH For plugs and portable socketoutlets)	-
24.15 (MECHANICAL STRENGTH)	-
24.16 (MECHANICAL STRENGTH)	-
24.16 (MECHANICAL STRENGTH For shroud of portable socket-outlets)	-
25.1 (Resistance to heat)	-
25.2 (Resistance to heat)	-
25.3 (Resistance to heat)	-
25.4 (Resistance to heat)	-
26.1 (SCREWS, CURRENTCARRYING PARTS AND CONNECTIONS)	-
26.2 (SCREWS, CURRENTCARRYING PARTS AND CONNECTIONS)	-
26.3 (SCREWS, CURRENTCARRYING PARTS AND CONNECTIONS)	-
26.4 (SCREWS, CURRENTCARRYING PARTS AND CONNECTIONS)	-
26.5 (SCREWS, CURRENTCARRYING PARTS AND CONNECTIONS)	-
26.6 (SCREWS, CURRENTCARRYING PARTS AND CONNECTIONS)	-
26.7 (SCREWS, CURRENTCARRYING PARTS AND CONNECTIONS)	-
27.1 (CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-
27.2 (CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-
27.3 (CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-
28.1.1 (Glow-Wire Test)	-
28.2 (Resistance to Tracking)	-
29 (Resistance to Rusting)	-
30.1 (ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Pressure Test at High Temperature)	-
30.2 (ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Static Damp Heat Test)	-
30.3 (ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Tests at Low Temperature)	-
30.4 (ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Impact Test at Low Temperature)	-
8 (Marking)	-

-
Complete Test facility available. Total no of samples needed for testing of moulded plugs would be as follows: 1. Moulded plugs without sleeve and without encapsulated current carrying part: 15 Samples 2. Moulded plugs without sleeve and with encapsulated current carrying part: 22 Samples 3. Moulded plugs with sleeve and without encapsulated current carrying part: 21 Samples 4. Moulded plugs with sleeve and with encapsulated current carrying part: 28 Samples

15254

BIS, Central Laboratory (CL)

None

IS 8183 (1993)

Bonded mineral wool - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.10.1 (Resistance to Micro-organisms (Optional))	-
Cl 4.1 (REQUIREMENTS)	-
Cl 4.1.1 (REQUIREMENTS)	-
Cl 4.2 (REQUIREMENTS)	-
4.3 (Recovery After Compression)	-
Cl 4.4 (REQUIREMENTS)	-
Cl 4.5 (REQUIREMENTS)	-

-
-

15255

BIS, Western Regional Laboratory (WRL)

None

IS 398 : Part 5 (1992)

Aluminium conductor for overhead transmission purposes - Specification: Part 5 aluminium conductors - Galvanized steel - Reinforced for extra high voltage (400 KV And Above) (First Revision)

Except Test facility for clause 13.10, 13.11 and 13.12

11400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7 (elec) (Freedom from defects)	-
13.2 (mech) (Visual Examination)	-
13.3 Table-1 (mech) (Diameter-Aluminium wires)	-
13.3 Table-2 (mech) (Diameter-Galvanized Steel wires)	-
13.5.1 Table 3 (elec) (Breaking Load on Complete conductor)	-
13.5.2 Table 1 (mech) (Breaking Load of Aluminium Wires Before Stranding)	-
13.5.2 Table 2 (mech) (Breaking Load of Steel Wires Before Stranding)	-
13.5.2 Table 2 (mech) (Breaking Load of Steel Wires After Stranding)	-
13.6.1 (mech) (Ductility by Torsion Test before stranding)	-
13.6.1 (mech) (Ductility by Torsion Test after stranding)	-
13.6.2 (mech) (Ductility by Elongation Test before stranding)	-
13.6.2 (mech) (Ductility by Elongation Test after stranding)	-
13.7.1 (mech) (Wrapping Test Aluminium Wires Before Stranding)	-
13.7.1 (mech) (Wrapping Test Aluminium Wires After Stranding)	-
13.7.2 (mech) (Wrapping Test Galvanized Steel Wires Before Stranding)	-
13.7.2 (mech) (Wrapping Test Galvanized Steel Wires After Stranding)	-
13.8 (elec) (Resistance test-Aluminium wire before Stranding)	-
14.8 (elec) (Resistance test-Aluminium wire after stranding)	-
13.9.2 (chem) (Mass of Zinc coating)	-
13.9.2 (chem) (Uniformity of Zinc coating)	-
13.4 Table-4 (mech) (Lay Ratio- Aluminium Wire Outermost Layer)	-
13.4 Table-4 (mech) (Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-
13.4 Table-4 (mech) (Lay Ratio- Aluminium Wire Innermost Layer of Conductors eith 3 Aluminium Wire Layers)	-
13.4 Table-4 (mech) (Lay Ratio- Steel Core (6 Wire Layer))	-
10.4 (mech) (Direction of lay)	-
13.5.2 Table 1 (mech) (Breaking Load of Aluminium Wires After Stranding)	-

-
Test facility not available: 1. Breaking Load Test on Complete Conductor, 2. Surface conditioning test apparatus 3. Corona Test 4. Radio Interference Voltage Test.

15256

BIS, Western Regional Laboratory (WRL)

None

IS 398 : Part 4 (1994)

Aluminium conductors for overhead transmission purposes: Part 4 aluminium alloy stranded conductors (Aluminium - Magnesium - Silicon Type) - Specification (Third Revision)

Please see remarks View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (Freedom from Defects)	-
7.1 Table-1 (Dimensional measurement of wires)	-
7.2.2 Table-2, Table-4 (Calculated resistance of Stranded Conductor)	-
8.1 (Joints in wires-Conductors Containing Seven Wires)	-
8.2 (Joints in wires-Conductors Containing More Than Seven Wires)	-
9.2 Table 3 (Lay Ratio of stranded conductors)	-
9.3 (Direction of Lay)	-
9.4 (Multiple layers of wires)	-
11 (Packing and Marking)	-
12.2 Table 1 (Breaking Load Test- Before Stranding)	-
12.2 Table 1 (Breaking Load Test- After Stranding)	-
12.3 Table 1 (Elongation Test- Before Stranding)	-
12.3 Table 1 (Elongation Test- After Stranding)	-
12.4 Table 1 (Resistance of Aluminium wire)	-
7.2.1 (Sizes)	-
Cl. 7.2 (7.2.1, 7.2.2), Table 2 (Approx Mass)	-

-
Complete Test facility available

15257

BIS, Western Regional Laboratory (WRL)

None

IS 398 : Part 1 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 1 aluminium stranded conductors (Third Revision)

Rs.1600/- for 7 strands, Rs.3750/- for 19 strands View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 (Freedom from defects)	-
9.3 (Stranding)	-
12.6, Table 3 (Measurement of lay ratio)	-
12.5, Table 1 (Resistance test)	-
12.4 (Wrapping test)	-
12.3, Table-1 (Breaking load after stranding)	-
12.3, Table-1 (Breaking load before stranding)	-
12.2, Table-1 (Measurement of diameter of individual aluminium wire)	-
7.1.1 (Nominal Sizes)	-
7.2.1 (Sizes)	-
7.2.2 (Resistance)	-
8, 8.1, 8.2 (Joint in wires, except during stranding)	-
9.2 (Lay ratio)	-
9.4 (Multiple layer of wires)	-

-
Complete Test Facility

15258

BIS, Northern Regional Laboratory (NRL)

None

IS 651 (2007)

Glazed stoneware pipes and fittings - Specification (Sixth Revision)

Rs. 6850/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 7.4 (Acid Resistance Test)	-
Clause 7.5 (Alkali Resistance Test)	-
7.2 (Hydraulic Test)	-
7.3 (Absorption Test)	-
11.1-Table 1 ( Mean Thickness of Barrel and of Socket)	-
10.1-Table 1 (INTERNAL DIAMETER)	-
14-Table 1 (Internal Depth of Socket)	-
14-Table 2 (Excess Shoulder Measurment)	-
14-Table 3 (Length of Grooving of Spigot)	-
12.2 (STRAIGHTNESS OF BARRELS OR STRAIGHT AND TAPER PIPES-Length of Junction)	-
13.1-Table 2 (Dimensions of One-Quarter Bends-Internal Diameter)	-
13.1-Table 2 (Dimensions of One-Quarter Bends-angle)	-
13.1-Table 6 (Dimensions of One-Eighth Taper Bends-D)	-
17-Table 10 (Dimensions of Channel Interceptors-A)	-
17-Table 10 (Dimensions of Channel Interceptors-G)	-
17-Table 11 (Dimensions of Round Mouth Gully traps-Type)	-
17-Table 11 (Dimensions of Round Mouth Gully traps-A)	-
17-Table 12 (Dimensions of Square Mouth Gully Traps-G)	-
17-Table 12 (Dimensions of Square Mouth Gully Traps-F')	-
17-Table 12 (Dimensions of Square Mouth Gully Traps-F)	-
17-Table 12 (Dimensions of Square Mouth Gully Traps-E)	-
17-Table 12 (Dimensions of Square Mouth Gully Traps-D)	-
17-Table 12 (Dimensions of Square Mouth Gully Traps-Size)	-
14 (The interior of the sockets shall be conical, having a minimum taper)	-
13.1-Table 3 (Dimensions of One-Eighth Bends-r)	-
13.1-Table 5 (Dimension of One-Quarter Taper Bends-r)	-
17-Table 10 (Dimensions of Channel Interceptors-C)	-

-
Chemical- complete; Mechanical- complete except HST and compression test for sizes above 300 mm

15259

BIS, Central Laboratory (CL)

None

IS 2404 (1993)

Malt extract - Specification (Second Revision)

Rs 6600/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Table 2 (i) IS 5402:1969 (Total bacterial count)	-
Table 2 (ii)IS no 5401 (Coliform bacteria)	-
Table 2 (iii) IS no 5403 ( Yeast count, per g)	-
Table 2 (iv) IS 5403 (Mould count, per g,)	-

-
-

15260

BIS, Western Regional Laboratory (WRL)

None

IS 371 (1999)

Ceiling roses - Specification (Third Revision)

6A, 250V

Rs 5700/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
9 (Marking)	-
10.1 (Dimentions)	-
10.2 (Dimentions)	-
11.1 (Accessibility of live parts )	-
11.2 (Accessibility of live parts )	-
11.3 (Accessibility of live parts )	-
11.4 (Accessibility of live parts )	-
11.4.1 (Accessibility of live parts )	-
12.1 (Provision for Earthing)	-
12.2 (Provision for Earthing)	-
13.1 (Terminals)	-
13.2 (Terminals)	-
13.3 (Terminals)	-
13.4 (Terminals)	-
13.5 (Terminals)	-
13.6 (Terminals)	-
13.7 (Terminals)	-
13.8.1 (Terminals)	-
13.8.2 (Terminals)	-
13.8.3 (Terminals)	-
14.1 (Construction)	-
14.2 (Construction)	-
14.3 (Construction)	-
14.4 (Construction)	-
15.1 (RESISTANCE TO MOISTURE AND HUMIDITY, INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-
15.2 (RESISTANCE TO MOISTURE AND HUMIDITY, INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-
15.3 (RESISTANCE TO MOISTURE AND HUMIDITY, INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-
15.4 (RESISTANCE TO MOISTURE AND HUMIDITY, INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-
15.5 (RESISTANCE TO MOISTURE AND HUMIDITY, INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-
15.7 (RESISTANCE TO MOISTURE AND HUMIDITY, INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-
16 (Temperature Rise Test)	-
17 (Temperature Rise Test)	-
18 (Resistance to heat)	-
19 (Resistance to abnormal heat fire and tracking)	-
19.2 (Resistance to abnormal heat fire and tracking)	-
20.1 (SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-
20.2 (SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-
20.3 (SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-
21.1 (CREEPAGE DISTANCE AND CLEARANCES)	-
22.1 (Resistance to Excessive residual Stress and to Rusting )	-
22.1 (Resistance to Excessive residual Stress and to Rusting )	-
22.1 (Resistance to Excessive residual Stress and to Rusting )	-

-
-

15261

BIS, Central Laboratory (CL)

None

IS 5405 (2019)

Sanitary napkins – Specification (second revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 7.3.1 (Bacterial and Fungal Bioburden, 7.3.1.1, ISO 11737 (Part 1))	-
Cl7.3.2 (Test for Common Skin Pathogen — Staphylococcus Aureus, 7.3.2.1, IS 5887 (Part 2))	-
Cl 5 (Absorbent Capacity, Regular )	-
Cl 5 (Absorbent Capacity, Large)	-
Cl 5 (Absorbent Capacity, Extra Large)	-
Cl 5 (SIZES, XXL)	-
Cl 7.1 (pH Value, IS 1390 (cold method) for all sizes)	-
Cl 7.2 (Ability to Withstand Pressure after Absorption, for all sizes, Annex B)	-
Cl 5 (SIZES, Large)	-
Cl 5 (SIZES, Extra Large)	-
Cl 5 (SIZES, Regular )	-

-
-

15262

BIS, Northern Regional Laboratory (NRL)

None

IS 624 (2003)

Bicycles - Rims - Specification (Fourth Revision)

2850 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7 (FINISH)	-
3.2 (SHAPES AND DIMENSIONS)	-
9 (COMPRESSION TEST)	-
7 (chem) (FINISH)	-

-
Except dimensions clause 3.2 & 3.2.1 Circumference and chemical finish test (Cl.7)

15263

BIS, Western Regional Laboratory (WRL)

None

IS 204 : Part 1 (1991)

Tower bolts - Specification: Part 1 ferrous metals (Fifth Revision)

Rs.2100.00. View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 -Table 5- i (Ref. Cl 7, Table 3, HR1 grade of IS 1079 : 2017) (Chemical composition - Carbon - IS 228)	-
4 -Table 5- i (Ref. Cl 7, Table 3, HR1 grade of IS 1079 : 2017) (Chemical composition - Manganese - IS 228)	-
4 -Table 5- i (Ref. Cl 7, Table 3, HR1 grade of IS 1079 : 2017) (Chemical composition - Phosphorus - IS 228)	-
4 -Table 5- i (Ref. Cl 7, Table 3, HR1 grade of IS 1079 : 2017) (Chemical composition - Sulphur - IS 228)	-
4 -Table 5- ii (Ref. Cl 5, Table 1, E300-C grade of IS 2062 : 2011) (Chemical composition - Silicon - IS 228)	-
6.1- Table 1 (Dimension of Barrel tower bolts-1.Size 2.Length of Bolt-A 3.Length of Barrel-B 4.Width of Barrel-C 5.Dia of Bolt-D 6.Length of Socket-E 7.Thickness of mild steel sheet for barrel-F 8.Dia of bore of barrel or socket- G )	-
6.2- Table 2 (Dimension of Sami Barrel Tower Bolts 1.Size 2.Length of Bolt-A 3.Length of Bolt Plate-B 4.Width of Bolt Plate-C 5.Dia of Bolt-D 6.Length of Socket-E 7.Thickness of Bolt Plate or Socket-F 8.Dia of bore of Bolt Plate or socket G )	-
6.2- Table 2 (Dimension of Sami Barrel Tower Bolts-Minimum No. of equally Spaced Screw holes in Bolt Plate and Socket for wood screw no 6)	-

-
Test facilities are not available for the following: (1) Finish

15264

BIS, Northern Regional Laboratory (NRL)

None

IS 1785 : Part 2 (1983)

Specification for plain hard drawn steel wire for prestressed concrete: Part 2 as - Drawn wire (First Revision)

Rs 3000/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5.1 (Diameter)	-
Cl 5.1.2 (Weight)	-
Cl 6.1 (Tensile Test On UTM)	-
Cl 6.3 (Tensile Test On UTM)	-
3.1.1 (PHOSPHORUS)	-
3.1.1 (SULPHUR)	-
Cl. 7.5 (Ductility/ Reverse Bend Test)	-

-
Test facility is complete for Chemical Except Proof Stress

15265

BIS, Central Laboratory (CL)

None

IS 1251 (1988)

Specification for zinc phosphide, technical

Technical

Rs.2300.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.1 (Description)	-
2.3 (Freedom from sulphides)	-
2.2 Table 2 i (Zinc Phosphide (Zn3P2))	-
2.2 Table 2 ii (Zinc Content)	-
2.2 Table 2 iii (Sieving Requirements: Material passing through 150 micron IS Sieve)	-
2.2 Table 2 iv (Sieving Requirements: Material passing through 106 micron IS Sieve)	-

-
-

15266

BIS, Central Laboratory (CL)

None

IS 261 (1982)

Specification for copper sulphate (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
1(i) Table 1 (Copper, Tech, A-2)	-
1(i) Table 1 (Copper, Pure, A-2)	-
1(ii) Table 1 (Matter insoluble in water, Tech, A-3)	-
1(ii) Table 1 (Matter insoluble in water, Pure, A-3)	-
1(iii) Table 1 (Soluble iron and aluminium compounds ( as Fe ), Pure, A-4)	-
1(iv) Table 1 (pH value, Tech, A-5)	-
1(iv) Table 1 (pH value, Pure, A-5)	-
1(v) Table 1 (Chloride ( as Cl ), Tech, A-6)	-
1(v) Table 1 (Chloride ( as Cl ), Pure, A-6)	-
1(vi) Table 1 (Arsenic ( as As2O3 ), Tech, A-7)	-
1(vi) Table 1 (Arsenic ( as As2O3 ), Pure, A-7)	-
1(vii) Table 1 (Lead and zinc, Tech, A-8)	-
1(vii) Table 1 (Lead and zinc, Pure, A-8)	-
Cl 3.1 (Description, Tech and Pure)	-

-
Facility is complete for this IS; Excluding NA

15267

BIS, Northern Regional Laboratory (NRL)

None

IS 1729 (2002)

Cast iron/ductile iron drainage pipes and pipe fittings for over ground non-pressure pipeline socket and spigot series (Second Revision)

Rs. 2850/- and testing charges as per referred Iss View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (Tensile Strrngth - IS1608(Pt-1))	-
5.1 (Elongation - IS 1608(Pt-1))	-
5.4 (Hardness- IS 1500)	-
7 (Leakage Test - IS 1729)	-
8.2-Table 1 to 32 (Dimension, a)	-
8.2-Table 1 to 32 (Dimension, b)	-
8.2-Table 1 to 32 (Dimension, c)	-
8.2-Table 1 to 32 (Dimension, d)	-
8.2-Table 1 to 32 (Dimension, e)	-
8.2-Table 1 to 32 (Dimension, f)	-
8.2-Table 1 to 32 (Dimension, g)	-
8.2-Table 1 to 32 (Dimension, h)	-
8.2-Table 1 to 32 (Dimension, i)	-
8.2-Table 1 to 32 (Dimension, j)	-
8.2-Table 1 to 32 (Dimension, k)	-
8.2-Table 1 to 32 (Dimension, l)	-
8.2-Table 1 to 32 (Dimension, m)	-
8.2-Table 1 to 32 (Dimension, n)	-
8.2-Table 1 to 32 (Dimension, p)	-
8.2-Table 1 to 32 (Dimension, q)	-
8.2-Table 1 to 32 (Dimension, r)	-
8.2-Table 1 to 32 (Dimension, r1)	-
8.2-Table 1 to 32 (Dimension, r2)	-
8.2-Table 1 to 32 (Dimension, s)	-
8.2-Table 1 to 32 (Dimension, t)	-
11 (Coating Test at 65degree Celcius )	-
11 (Coating Test at 0degree Celcius)	-
5.3 (Casting Defects)	-

-
Test facility is complete and Standard has been revised as IS 1729 : 2023 Facility for chemical testing is not available

15268

BIS, Northern Regional Laboratory (NRL)

None

IS 1489 : Part 2 (2015)

Portland - Pozzolana cement - Specification: Part 2 calcined clay based

Rs.8420/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 - Table - 1 i (Insoluble residue - Cl 7.4 of IS 4032:1985)	-
6 - Table - 1 ii (Magnesia - Cl 7.2 of IS 4032:1985)	-
6 - Table - 1 iii (Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-
6 - Table - 1 v (Chloride content - Cl 4.13 of IS 4032:1985)	-
6 - Table - 1 vi ( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-
7 -Table 2- i (Fineness 4031 Part 2)	-
7 -Table 2- ii- a (Expansion by Le Chatelier- 4031 Part 3)	-
7 -Table 2- ii- a (Expansion after aeration - 4031 Part 3)	-
7 -Table 2- ii- b (Expansion by Autoclave- 4031 Part 3)	-
7 -Table 2- ii- b (Expansion after aeration- 4031 Part 3)	-
7 -Table 2- iii- a (Setting Time Initial- 4031 Part 5)	-
7 -Table 2-iii- b (Setting Time Final- 4031 Part 5)	-
7 -Table 2- iv- a (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-
7 -Table 2- iv- b (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-
7 -Table 2- iv- c (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-
7 -Table 2- vi (Drying Shrinkage- IS 4031 Part 10)	-

-
Test facility is complete for Chemical Except Transverse Strength Test

15269

BIS, Northern Regional Laboratory (NRL)

None

IS 2255 (1977)

Specification for mild steel wire rod for the manufacture of machine screws (By Cold Heading Process) (Second Revision)

Rs. 600/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7 (Sizes and tolernces)	-
8 (FREEDOM FROM DEFECTS)	-

-
Test facility is complete for Chemical,Tensile test,Microaalloying Element

15270

BIS, Northern Regional Laboratory (NRL)

None

IS 2266 (2024)

STEEL WIRE ROPES FOR GENERAL ENGINEERING PURPOSE - SPECIFICATION (Sixth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-5 (Minimum breaking force)	-
Cl-6 of IS 1835 (Manganese)	-
Cl-6 of IS 1835, (Carban)	-
Cl-6 of IS 1835 (Silicon)	-
Cl-6 of IS 1835 (Sulphur, Max)	-
Cl-6 of IS 1835 (Phosphorus, Max)	-

-
Special Tensile Testing machine of more than 1000kN capacity is required Except "Tensile test". Test Facility is not available for clause 8.1 and test facility available only for chemical composition (except Microalloying Elements) and galvanizing for clause 8.2 as per IS 6594.

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number