BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15549 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

15421

BIS, Northern Regional Laboratory (NRL)

None

IS 1011 (2002)

Biscuits - Specification (Fourth Revision)

Rs.3280/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (General Requirement)	-
6.3 Table 2 i (Moisture)	-
6.3 Table 2 ii (Acid insoluble ash (on dry basis))	-
6.3 Table 2 iii (Acidity of extracted fat (as oleic acid))	-
6.3 Table 2 i (Moisture)	-
6.3 Table 2 ii (Acid insoluble ash (on dry basis))	-
6.3 Table 2 iii (Acidity of extracted fat (as oleic acid))	-

-
Test facility is complete

15422

BIS, Southern Regional Laboratory (SRL)

None

IS 1029 (1970)

Specification for hot-rolled steel strip (Baling) (First Revision)

Rs.750/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1 (Freedom from defects)	-
8.2 (Width)	-
8.2 (Thickness)	-
9.1 (Finishing & Packing)	-

-
" 0.5 sq.m Excluding except tensile, bend test and chemical tests

15423

BIS, Southern Regional Laboratory (SRL)

None

IS 1079 (2017)

Hot rolled carbon steel sheet, plate and strip - Specification (Seventh Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 (UTM)	-
Cl 12 (Workmanship)	-
Cl 13 (Length, Width & Thickness)	-

-
" 2x0.5 mt " Excluding Excl cupping test, Bend test (as lower sizes of manderls is not available), Strain aging test and chemical requirements

15424

BIS, Eastern Regional Laboratory (ERL)

None

IS 16208 (2015)

Textiles - High density polyethylene (HDPE)/polypropylene (PP) woven sacks for packaging 10 kg, 15 kg, 20 kg, 25 kg and 30 kg foodgrains - Specification

all varieties.

Rs.19750/- (including all parameters), Rs.10450/- (excl View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 (TYPES)	-
4.2 (Construction)	-
4.3.1 (Bottom Seam)	-
4.3.1 ( The two rows of stitches shall be separated from each other)	-
4.3.1 ( The outer stitch)	-
4.3.1 (Stitches pass through a minimum of six layers of the fabric. )	-
4.3.1 (The number of stitches/dm)	-
4.3.2 (Mouth)	-
4.4 and Table 1 i (Capacity)	-
5.2 and Table 1 ii a (Dimensions Inside Length)	-
5.2 and Table 1 ii b (Dimensions Inside Width)	-
5.2 and Table 1 iii (Ends per dm )	-
5.2 and Table 1 iv (Picks per dm )	-
5.1 and Table 1 v (Mass of sack )	-
5.2 and Table 1 vi a (Average breaking strength of fabric Lengthwise )	-
5.2 and Table 1 vi b (Average breaking strength of fabric Widthwise )	-
5.2 and Table 1 ix (Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-

-
Complete.

15425

MSME TESTING CENTRE (WR), MUMBAI

7119404

IS 7231 (1994)

plastic flushing cisterns for waterclosets and urinals

Discharge capacity from 5liter to 10liter

10500 View breakup
Rs.10,500/- + taxes

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.1(Cistern)	-	2000	2000
Cl 5.2(Cover)	-	2000	2000
Cl 5.3(Flush pipe)	-	2000	2000
Cl 5.3.1(Flush pipe connection to cistern.)	-	2000	2000
Cl 5.4(Inlet and overflow holes)	-	2000	2000
Cl 5.5(Float valve)	-	2000	2000
Cl 5.6(Operating mechanism / lever)	-	2000	2000
(Cl.6)(Finish)	-	1000	1000
(Cl 9.3)(Endurance test)	-	5000	5000
Cl 7.6 & 9.2(Discharge rate )	-	1000	1000

-
-

15426

BIS, Southern Regional Laboratory (SRL)

None

IS 1011 (2002)

Biscuits - Specification (Fourth Revision)

Rs.3280/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (General Requirement)	-
6.3 Table 2 i (Moisture)	-
6.3 Table 2 ii (Acid insoluble ash (on dry basis))	-
6.3 Table 2 i (Moisture)	-
6.3 Table 2 ii (Acid insoluble ash (on dry basis))	-

-
" 3 x 100 g Excluding determination acidity of extractable fat

15427

BIS, Central Laboratory (CL)

None

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

25780 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5 (Deformations and Surface Characteristics)	-
Cl 7.2 (Weight)	-
4.1 (Carbon %)	-
4.1 (Sulphur %)	-
4.1 (Phosphorus %)	-
4.1 (Manganese %)	-
4.1 ( Nitrogen%)	-
4.1 (Sulphur and phosphorous)	-
4.1 (CE)	-
Cl 5 (Deformations and Surface Characteristics)	-
Clause 8.1(Table 3) (Total Elongation at Maximum Force)	-
Cl. 8.1 Table 3 (TS/YS ratio)	-
Cl. 8.1 Table 3 (Elongation, percentage)	-
Cl. 8.1 Table 3 (Yield Stress (YS))	-
Cl.9.4 & Cl. 9.4.1 (Rebend test)	-
Cl. 9.3, Table 4 (Bend Test )	-
Cl. 8.1 Table 3 (Tensile Strength (TS))	-

-
Microalloying element/type of killing (element)/any other element to be declared; Excluding -; Pull out test,

15428

BIS, Eastern Regional Laboratory (ERL)

None

IS 1061 (2025)

Disinfectant Fluids, Phenolic Type - Specification ( Sixth Revision )

Class, Grade and Type to be declared

- View breakup
22,151/- for Gr 1A,2A,3A and 16,151/- for Gr 1,2,3 for Disinfectant-cum-De-odorizing fluids and 16,551/- for Gr 1A,2A,3A and 10,551/- for Gr 1,2,3 for other classes

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2 (Description (IS 1061 : 2025))	-
4.3 (Stability after Dilution - a) Miscibility (IS 1061 : 2025))	-
4.3 (Stability after Dilution - b) Separation at Top & Bottom (IS 1061 : 2025))	-

-
Except cl 4.2.4 Description (Disinfectant-cum-De-odourizing Fluids), cl 4.8.1 Volatile Matter, cl 4.8.2 The material shall not be less than 40 percent (v/v) steam volatile oil when determined by the steam distillation, cl 4.8.3 Odour, cl 4.8.4 Persistance of Odour, cl 4.8.5 Flash Point (Abel), cl 4.6/4.2.4 Stability on storage [Description (Disinfectant-cum-De-odourizing Fluids)], cl 4.6/4.8.1 Stability on storage [Volatile Matter], cl 4.6/4.8.2 Stability on storage [The material shall not be less than 40 percent (v/v) steam volatile oil when determined by the steam distillation], cl 4.6/4.8.3 Stability on storage [Odour], cl 4.6/4.8.4 Stability on storage [Persistance of Odour], cl 4.6/4.8.5 Stability on storage [Flash Point (Abel)].

15429

MSME TESTING CENTRE (WR), MUMBAI

7119404

IS 12592 (2002)

Precast concrete manhole cover and frame - Specification (First Revision)

LD-2.5, MD-10,HD-20, EHD-35

9000.00 View breakup
Complete test charges

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2 and Table 1(Dimensions of Frame - A)	-	500	Per single dim.500
5.2 and Table 1(Dimensions of Frame - B)	-	500	Per single dim.500
5.2 and Table 1(Dimensions of Frame - C)	-	500	Per single dim.500
5.2 and Table 1(Dimensions of Frame - D)	-	500	Per single dim.500
5.2 and Table 1(Dimensions of Frame - E)	-	500	Per single dim.500
5.2 and Table 1(Dimensions of Frame - F)	-	500	Per single dim.500
5.2(Dimensions of cover- Diameter)	-	500	Per single dim.500
5.2(Clearance at top between the frame and the cover all round the periphery)	-	500	Per single dim.500
5.2(Top surface ofthe frame and cover is in level)	-	500	Per single dim.500
5.2(Suitable taper matching with taper given for the frame shall be provided to the periphery of the cover)	-	500	Per single dim.500
5.2 and Fig 1(Clear cover to reinforcement)	-	500	Per single dim.500
5.2 and Fig 1(Distance of housing from the edge)	-	500	Per single dim.500
7.4.1(Edge Protection and Finishing - Frame)	-	1500	1500
7.4.2(Edge Protection and Finishing - Cover)	-	1500	1500
8(LIFTING HOOKS)	-	500	Per single dim.500
9.3 and Table and Annex C(Load Test)	-	2500	2500

-
-

15430

BIS, Southern Regional Laboratory (SRL)

None

IS 1417 (2016)

Gold and gold alloys, jewellery/ artefacts - Fineness and marking - Specification (Fourth Revision)

Yellow Gold Alloy Jewellery- 9K (375), 14K (585), 18K (750), 20K (833), 22K (916), 23K (958), 995 and 999

Rs.1800.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Fineness/ Gold Content in parts per thousand, percent)	-
4.1.1 (a) (Presence of Iridium)	-
4.1.1 (a) (Presence of Ruthenium)	-
4.1.1 (a) (Presence of Cadmium)	-
4.1.1 (a) (Presence of Osmium)	-

-
Min 1.5 g sample for 9K gold jewellery without any stone/lacquer etc; Min. 1g sample for other grades of jewellery without any stone/lacquer etc

15431

BIS, Southern Regional Laboratory (SRL)

None

IS 17423 (2020)

Medical textiles – Coveralls for COVID 19 – Specification

Rs.3650/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Manufacture - IS 17423)	-
4.1.1 (Manufacture - IS 17423)	-
4.1.1 (Manufacture - IS 17423)	-
4.2 (Manufacture - IS 17423)	-
4.2 (Manufacture - IS 17423)	-
4.3 (Manufacture - IS 17423)	-
4.3 (Manufacture - IS 17423)	-
4.4 (Manufacture - IS 17423)	-
4.4 (Manufacture - IS 17423)	-
4.5 (Manufacture - IS 17423)	-
4.6 (Manufacture - IS 17423)	-
5.1 (Workmanship and Finish - IS 17423)	-
5.1 (Workmanship and Finish - IS 17423)	-
Table 1 & Cl.4.4, 5.2 and 5.3) (Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Coverall Fabric from body Specimen 1)	-
Table 1 & Cl.4.4, 5.2 and 5.3) (Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Coverall Fabric from body Specimen 2)	-
Table 1 & Cl.4.4, 5.2 and 5.3) (Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Coverall Fabric from body Specimen 3)	-
Table 1 & Cl.4.4, 5.2 and 5.3) (Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Coverall Fabric at Seam Specimen 1)	-
Table 1 & Cl.4.4, 5.2 and 5.3) (Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Coverall Fabric at Seam Specimen 2)	-
Table 1 & Cl.4.4, 5.2 and 5.3) (Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Coverall Fabric at Seam Specimen 3)	-
Table 1 & Cl.4.4, 5.2 and 5.3) (Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Shoe Cover Fabric from body Specimen 1)	-
Table 1 & Cl.4.4, 5.2 and 5.3) (Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Shoe Cover Fabric from body Specimen 2)	-
Table 1 & Cl.4.4, 5.2 and 5.3) (Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Shoe Cover Fabric from body Specimen 3)	-
Table 1 & Cl.4.4, 5.2 and 5.3) (Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Shoe Cover of Seam Specimen 1)	-
Table 1 & Cl.4.4, 5.2 and 5.3) (Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Shoe Cover of Seam Specimen 2)	-
Table 1 & Cl.4.4, 5.2 and 5.3) (Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Shoe Cover of Seam Specimen 3)	-

-
-

15432

BIS, Eastern Regional Laboratory (ERL)

None

IS 10631 (1983)

Specification for stainless steel for welding electrode core wire

All

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 (FREEDOM FROM DEFECTS)	-
Clause 5.1 (Carbon)	-
Clause 5.1 (Silicon)	-
Clause 5.1 (Manganese)	-
Clause 5.1 (Phosphorous)	-
Clause 5.1 (Sulphur)	-
Clause 5.1 (Chromium)	-
Clause 5.1 (Molybdenum)	-
Clause 5.1 (Nickel)	-
Cl. 5.1, Table (Nitrogen)	-
Cl. 7.1 Table No 3 Sl No. xii) (Niobium)	-

-
Size and designation to be declared.

15433

BIS, Eastern Regional Laboratory (ERL)

None

IS 16353 (2015)

Portland Cement Clinker - Specification

Rs. 5700/ View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 5 Table 1 (Ratio of percentage of lime to percentages of silica, alumina and iron oxide)	-
Clause 5 Table 1 (Ratio of percentage of alumina to that of iron oxide,)	-
Clause 5 Table 1 (C3S, percent by mass)	-
Clause 5 Table 1 (C3A, percent by mass)	-
Clause 5 Table 1 (C3S+C2S, percent by mass)	-
Clause 5 Table 1 (Total sulphur content calculated as sulphuric anhydride (SO3))	-
Clause 5 Table 1 (Free lime)	-
Clause 5 Table 1 (Chloride content)	-
Clause 5 Table 1 (Magnesia)	-
Clause 5 Table 1 (Alkali content)	-
Clause 5 Table 1 (Total loss on ignition)	-
Clause 5 Table 1 (Insoluble residue)	-
6.1 Table 2 iii) c) IS 4031 (Part 6) (Compressive Strength at 672±4 h)	-
6.1 Table 2 iii) b) IS 4031 (Part 6) (Compressive Strength at 168±2 h)	-
6.1 Table 2 iii) a) IS 4031 (Part 6) (Compressive Strength at 72±1 h)	-
6.1 Table 2 ii) a) IS 4031 (Part 5) (Initial Setting time)	-
6.1 Table 2 ii) b) IS 4031 (Part 5) (Final Setting time)	-
6.1 Table 2 i) b) IS 4031 (Part 3) (Soundness by Autoclave test method)	-
6.1 Table 2 i) a) IS 4031 (Part 3) (Soundness by Le-Chatelier method)	-
6.1 IS 4031(Part 2) (Fineness)	-
Cl. 5,Table 1 (Insoluble chloride)	-
Cl. 5,Table 1 (Total loss on ignition)	-
Cl. 5,Table 1 (Alkali content,expressed as sodium oxide)	-
Cl. 5,Table 1 (Magnesia)	-
Cl. 5,Table 1 (Chloride content)	-
Cl. 5,Table 1 (Free lime)	-
Cl. 5,Table 1 (Total sulphur content calculated as sulphuric anhydride)	-
Cl. 5,Table 1 (C3S+C2S)	-
Cl. 5,Table 1 (C3A)	-
Cl. 5,Table 1 (C3S)	-
Cl. 5,Table 1 (Ratio of percentage of alumina to that of iron oxide)	-
Cl. 5,Table 1 (Ratio of percentage of lime to percentages of silica, alumina and iron oxide)	-
6.1 Table 3 iii) (Granulometric composition of clinker(Size >50 mm))	-

-
Chem-Declaration for chloride regarding end use of cement (as per Table 1), Confirmation required for testing Alkali Content. Sample quantity- For physical tests 8 kg clinker ground with gypsum as per Cl 6.1, for chemical tests 2 kg clinker is to be provided.

15434

BIS, Southern Regional Laboratory (SRL)

None

IS 15354 : Part 1 (2018)

Single - Use medical examination gloves: Part 1 specification for gloves made from rubber latex or rubber solution (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 & Table 2 (Size code)	-
6.1 & Table 2 (Width corresponding to size code (dimension w,Figure 1))	-
6.1 & Table 2 (Descriptive size)	-
6.1 & Table 2 (Width corresponding to Descriptive size (dimension w,Figure 1))	-
6.1 & Table 2 (Minimum length (dimension l, Figure 1))	-
6.1 & Table 2 (Minimum thickness (at locations shown in Figure 2))	-
6.1 & Table 2 (Maximum thickness (at approximate centre of palm))	-
6.3.2 & Table 3 (Minimum force at break before accelerated ageing)	-
6.3.2 & Table 3 (Minimum Elongation at break before accelerated ageing)	-
6.3.3 & Table 3 (Minimum force at break after accelerated ageing)	-
6.3.3 & Table 3 (Minimum Elongation at break after accelerated ageing)	-

-
" Mech - 10 pairs

15435

BIS, Southern Regional Laboratory (SRL)

None

IS 10748 (2004)

Hot - Rolled steel strip for welded tubes and pipes - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 & Table 3 (UTM)	-
Cl 11 (Workmanship)	-
Cl 12 & 13 (Length, Width & Thickness)	-
7.1 (Carbon %)	-
7.1 (Manganese %)	-
7.1 (Phosphorus %)	-
7.1 (Sulphur %)	-
7.1 (Silicon %)	-
7.1 ( Copper %)	-
7.1 ( Aluminium %)	-
7.1 ( Nb)	-
7.1 (V)	-
7.1 ( Ti)	-
7.1 (Cr)	-
7.1 (Mo)	-
7.1 (Ni)	-
7.1 ( Nitrogen%)	-
Table 1 ( Clauses 7.1 ,7.2 ) (CARBON EQUIVELENT )	-
7.0 (7) (Micro Alloying elements - IS:8811)	-
Table 1 ( Clauses 7.1 ,7.2 ) (Tungsten (W))	-
Table 1 ( Clauses 7.1 ,7.2 ) (Boron (B))	-

-
" 0.5 sq.m Chemical Facility is available Quantity: 5 Pieces of 5cm X 5cm Excluding Bend test not available(Prepared test pieces are required for Tensile Test)

15436

BIS, Southern Regional Laboratory (SRL)

None

IS 3074 (2013)

Steel tubes for automotive purposes - Specification (Third Revision)

4200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (Workmanship)	-
8.2,15,17,22, Table 3,5 &7 (Tensile Tests,IS 1608 Part 1)	-
8.3,18, (Flattening Test)	-
8.4 (Crushing Test)	-
8.5 (Drift Test)	-
6 (STRAIGHTNESS)	-
8.2,15,17,22, Table 3,5 &7 (Tensile Tests,IS 1608 Part 1)	-

-
" 2 mt + 50gm Excluding except LEAK TIGHTNESS TEST,chemical tests

15437

BIS, Southern Regional Laboratory (SRL)

None

IS 963 (1958)

Specification for chrome molybdenum steel bars and rods for aircraft purposes

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (Freedom from defects)	-
7.5 (Hardness)	-
7.6.2 (i) Yield stess/.2% Proof stress, Mpa)	-
7.6.2 (ii)Ultimate Tensile Strength, Mpa)	-
7.6.2 (iii)Elongation, %)	-
7.6.2 (ii)Ultimate Tensile Strength, Mpa)	-
9 (Rolling Tolerances)	-

-
" mech - 2 x 500 mm " Excluding except Hardenability, Grain size, Decarburization and Chemical tests

15438

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 398 : Part 1 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 1 aluminium stranded conductors (Third Revision)

All

Rs.1600/- for 7 strands, Rs.3750/- for 19 strands View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
12.2, Table-1 (Measurement of diameter of individual aluminium wire)	-
12.3, Table-1 (Breaking load before stranding)	-
12.3, Table-1 (Breaking load after stranding)	-
12.4 (Wrapping test)	-
12.5, Table 1 (Resistance test)	-
12.6, Table 3 (Measurement of lay ratio)	-
9.3 (Stranding)	-
6 (Freedom from defects)	-

-
Complete

15439

BIS, Southern Regional Laboratory (SRL)

None

IS 13428 (2005)

Packaged natural mineral water specification (Second Revision)

19200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1.1 (Escherichia coli(or thermotolerant bacteria))	-
6.1.2 (Coliform , bacteria)	-
6.1.3 (Faecal Streptococci )	-
6.1.3 (Staphylococcus Aureus)	-
6.1.4 (Sulphite Reducing Anaerobes )	-
6.1.5 (Pseudomonas Aeruginosa )	-
6.1.6 (Yeast and Mould )	-
6.1.7 (Salmonella )	-
6.1.7 (Shigella)	-
6.1.8 (Vibrio cholera )	-
6.1.8 (Vibrio parahemolyticus)	-
6.2 Table-1 i (Colour)	-
6.2 Table-1 ii (Odour)	-
6.2 Table-1 iii (Taste)	-
6.2 Table-1 iv (Turbidity)	-
6.2 Table-1 v (Total dissolved solids)	-
6.2 Table-1 vi (pH)	-
6.2 Table-2 i (Nitrate (as NO3))	-
6.2 Table-2 ii (Nitrite (as NO2))	-
6.2 Table-2 iii (Sulphide (as H2S))	-
6.2 Table-2 iv (Manganese (as Mn))	-
6.2 Table-2 v (Copper (as Cu))	-
6.2 Table-2 vi (Zinc (as Zn))	-
6.2 Table-2 vii (Flouride (as F))	-
6.2 Table-2 viii (Barium (as Ba))	-
6.2 Table-2 ix (Antimony (as Sb))	-
6.2 Table-2 xi (Silver (as Ag))	-
6.2 Table-2 xii (Chloride (as Cl))	-
6.2 Table-2 xiii (Sulphate (as SO4),)	-
6.2 Table-2 xiv (Magnesium (as Mg))	-
6.2 Table-2 xv (Calcium (as Ca))	-
6.2 Table-2 xvi (Sodium (as Na))	-
6.2 Table-2 xvii (Alkalinity (as HCO3))	-
6.2 Table-2 xviii (Selenium (as Se))	-
6.2 Table-2 xix (Mineral Oil)	-
6.2 Table-2 xx (Phenolic compounds (as C6H5OH))	-
6.2 Table-3 i (Arsenic (as As))	-
6.2 Table-3 ii (Cadmium (as Cd))	-
6.2 Table-3 iv (Chromium (as Cr))	-
6.2 Table-3 v (Mercury (as Hg))	-
6.2 Table-3 vi (Lead (as Pb)	-
6.2 Table-3 vii (Nickel (as Ni))	-

-
" 48x500ml; 24x1 ltr; 6x2ltr; 4x5 ltr; 2x20ltr Excluding ex.for radio active residues , CN,mbas,Phenolic compounds

15440

BIS, Eastern Regional Laboratory (ERL)

None

IS 7098 : Part 1 (1988)

Specification for crosslinked polyethylene insulated pvc sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision)

complete cat 01(except water absorption above 25sqmm)

26250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 (CONDUCTOR: MATERIALS)	-
4 (INSULATION : MATERIALS)	-
5.1 (FILLER AND INNER SHEATH)	-
5.2 (FILLER AND INNER SHEATH)	-
6 (ARMOURING)	-
7 (OUTER SHEATH)	-
8.1 (CONDUCTOR: CONSTRUCTION)	-
8.2 (PROTECTIVE BARRIER)	-
8.3 (SIZE OF NEUTRAL CONDUCTOR)	-
9.2 (Thickness of Insulation - Average)	-
9.3 (Thickness of Insulation - Minimum)	-
9.4 (Application of Insulation)	-
10.1 (Core Identification)	-
10.2 (Core Identification- Neutral)	-
10.3 (Core Identification by number )	-
10.4 (Core Identification by number - Neutral )	-
11 (LAVING UP OF CORES)	-
12.1 & 12.2 (Inner sheath : Application)	-
12.3 (Thickness of Inner Sheath)	-
13.1 (Armouring: Application)	-
13.1.3 (Armouring: Direction of Lay )	-
13.2 (Type of armour )	-
13.3 (Armouring : Dimensions -Wire Diameter)	-
13.3 (Armouring : Dimensions -Formed wire )	-
13.4 (Armour: Joint)	-
13.5 (Armouring : Resistance Test)	-
13.6 a) (ARMOURING: Tensile Strength)	-
13.6 b) (ARMOURING: Elongation )	-
13.6 c) (ARMOURING: Torsion Test (For round wire ) )	-
13.6 d) (ARMOURING: Winding Test(For formed wire))	-
13.6 e) (ARMOURING: Uniformity of zinc coating)	-
13.6 f) (ARMOURING: Mass of zinc coating )	-
13.6 g) (ARMOURING: Resistivity)	-
14.1 (Outer Sheath : Application)	-
14.2 (Colour of outer sheath)	-
14.3 (Thickness of outer sheath - AVERAGE)	-
14.3 (Thickness of outer sheath - minimum)	-
15.1 a) i) (Annealing Test ( For copper wire ) )	-
15.1 a) ii) (Tensile test (for aluminium) - Before stranding )	-
15.1 a) ii) (Tensile test (for aluminium) - After stranding )	-
15.1 a) iii) (Wrapping test (for aluminium))	-
15.1 a) iv) (Resistance test - Main conductor)	-
15.1 a) iv) (Resistance test - Neutral conductor)	-
15.1 d) i) (Phyaical tests for insulation : Tensile Test)	-
15.1 d) i) (Phyaical tests for insulation : Elongation)	-
15.1 d) ii) (Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-
15.1 d) ii) (Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-
15.1 d) iii) (Phyaical tests for insulation : Hot set )	-
15.1 d) iii) (Phyaical tests for insulation : Permanent set )	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage )	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage - Crack observed )	-
15.1 d) v) (Insulation: Waterabsorption(gravimetric))	-
15.1 e) i) (Physical tests for outer sheath : Tensile stregth)	-
15.1 e) i) (Physical tests for outer sheath : Elongation)	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation )	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-
15.1 e) iii) (Sheath: Loss of mass in air oven)	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage )	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage - Crack observed )	-
15.1 e) v) (Sheath : Hot deformation)	-
15.1 e) vi) (Sheath : Heat shock test)	-
15.1 e) vii) (Sheath : Thermalstability)	-
15.1 f) (INSULATION RESISTANCE TEST : Volume resistivity )	-
16.2 (HIGH VOLTAGE TEST )	-
16.3 (FLAMMABILITY TEST : Period of Burning )	-
16.3 (FLAMMABILITY TEST : Unaffected length )	-
17.1 (Manufacturer'. identification)	-
17.2 (cable Indentification )	-
17.3 (cable Code )	-
Table 4 (Copper purity test)	-
13.1.2 (Armouring: Coverage )	-

-
Elec-For cat.-01: Up to 240 sq mm all tests can be carried out (except water absorption). However, facility not available for Loss of mass above 1.2 mm thickness, Tensile & Elongation above 2.0 mm thickness and Water absorption test above 25 sq.mm cable. All facilities available for C1 & C2- except additional tests

15441

BIS, Guwahati Branch Laboratory (GBL)

None

IS 277 (2018)

Galvanized steel strips and sheets (Plain And Corrugated) - Specification (Seventh Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 12 (Workmanship)	-
Cl 13 (Weight)	-
Cl. 8.1 (Cl. 8.1 (Tensile Strength))	-
Cl. 8.1 (Cl. 8.1 (Yield Stress))	-
Cl. 8.1 (Cl. 8.1 (Percentage Elongation ))	-
Cl.12 (Freedom from defects)	-
Cl. 14 (Cl. 14 & Cl 15 (Length))	-
Cl. 14 (Cl. 14 & Cl 15 (Width))	-
Cl. 14 & Cl. 15 (Cl. 14 & Cl. 15 (Thickness))	-
Cl. 14 & Cl. 15 (Cl. 14 & Cl 15 (Difference between Diagonal))	-
Cl. 14 & Cl. 15 (Cl. 14 & Cl 15 (Number of Corrugation))	-
Cl. 14 & Cl. 15 (Depth of corrugation (average of 4))	-
Cl. 14 & Cl. 15 (Pitch of corrugation (average of 4))	-
Cl. 17 (Marking )	-
Cl 10 (Galvanising Test)	-
7.4 (Mass of Coating: Single Spot Test)	-
7.4 (Mass of Coating: Triple Spot Test)	-
7.1 & 10.2 (Mass of Coating: Triple Spot Test)	-
7.1 & 10.2 (Mass of Coating: Single Spot Test)	-

-
Qty. required Mech - 2 nos. of 0.5 m x 0.5 m Chem - 5 Pcs of 5 cm x 5 cm i. Table-1, Clause 5.1 Chemical Analysis test facility not available. ii. Bend test facility not available. iii) Retain as partial

15442

BIS, Guwahati Branch Laboratory (GBL)

None

IS 2098 (1997)

Asbestos cement building boards - Specification (First Revision)

3300.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8.3 Table 1 & 7.1 (TESTS-Measurement of Thickness )	-
8.4 (TESTS-Water Absorption Test )	-
11 (MARKING-Each board shall be stamped or marked by any suitable method on non weathering side with the following information: )	-
Cl. 7.1 Table -1 (Cl. 7.1 ,Table-1 (Length))	-
Cl. 7.1 Table -1 (Cl. 7.1 , Table-1 (Width))	-
Cl. 7.2 Table -1 (Cl. 7.1 , Table-1 (Thickness))	-
Cl.6 (General apperance and finish)	-
Cl. 8.2 (Cl. 8.2 ,Tests-Load Bearing Capacity test, Class A/B/C ,Average Load)	-
Cl. 8.2 (Cl. 8.2 ,Tests-Load Bearing Capacity test, Class-A/B/C , Individual Load )	-

-
Qty. required 2 Sheets (Full size)

15443

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 1507 (1977)

Specification for copper oxychloride water dispersible powder concentrates

Rs 2700/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.2.1 (Description)	-
Cl. 2.3, Table-1 (Copper Content)	-
Cl. 2.3, Table-1 (Suspensibility)	-
Cl. 2.3, Table-1 (pH of one percent aqueous dispersion)	-

-
Complete for chemical section.

15444

BIS, Guwahati Branch Laboratory (GBL)

None

IS 1626 : Part 3 (1994)

Asbestos Cement Building types and Pipe Fittings, Gutters and Gutter Fittings and Roofing Fittings - Part 3 : Roofing Fittings

Rs.3300.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 Table-1 (Shapes)	-
6.1 (Physical requirements)	-
7 (Genaral appearance and finish)	-
10 (Marking)	-
6.2 (Impermeability test according to the Method 1 described in IS 5913 : 1989)	-
Cl. 5.2 (Cl. 5.2 Outer Thickness)	-
Cl. 5.2 (Cl. 5.2 Inner Thickness)	-
Cl. 5.2 (Cl. 5.2, Outer Length)	-
Cl. 5.2 (Cl. 5.2, Inner Length )	-

-
Qty. required One Pair (One Inner & One Outer)

15445

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 1011 (2002)

Biscuits - Specification (Fourth Revision)

3280 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.3 Table 2 i (Moisture)	-
6.3 Table 2 ii (Acid insoluble ash (on dry basis))	-
6.3 Table 2 iii (Acidity of extracted fat (as oleic acid))	-
6.1 (General Requirement)	-

-
Complete for chemical section.

15446

BIS, Guwahati Branch Laboratory (GBL)

None

IS 1328 (1996)

Veneered Decorative Plywood -Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Grade - For BWR)	-
4.1 (Grade - For MR)	-
4.2 (Type - For Type 1)	-
4.2 (Type - For Type 2)	-
7.1.1 (Requirements - Open splits, checks or open joints - For Type 1 - Cl. 7.1.1)	-
7.2.1 (Requirements - Open splits, checks or open joints - For Type 2 - Cl. 7.2.1)	-
7.1.2 (Requirements - Other defects - For Type 1 - Cl. 7.1.2)	-
7.2.2 (Requirements - Other defects - For Type 2 - Cl. 7.2.2.)	-
7.1.3 (Requirements - Other Charcteristics and Manufacturing Defects - For Type 1 - Cl. 7.1.3)	-
7.2.3 (Requirements - Other Charcteristics and Manufacturing Defects - For Type 2 - Cl. 7.2.3)	-
8 (Dimensions & Tolerances - Length - Cl. 8)	-
8 (Dimensions & Tolerances - Width - Cl. 8)	-
8 (Dimensions & Tolerances - Thickness - Cl. 8)	-
8 (Dimensions & Tolerances - Edge Straightness - Annexure C)	-
8 (Dimensions & Tolerances - Squareness - Annexure C)	-
9 (Finish - Cl. 9.1, 8.3)	-
9 (Finish - Cl. 9.2, 8.3)	-
11 (Tests - Moisture Content - Part 1 of IS 1734)	-
11 (Tests - Water Resistance Test - Cl. 11.1.2.1 [for MR Grade])	-
11 (Tests - Water Resistance Test - Cl. 11.1.2.2 [for BWR Grade])	-

-
Qty. required 1 Nos

15447

BIS, Eastern Regional Laboratory (ERL)

None

IS 3074 (2013)

Steel tubes for automotive purposes - Specification (Third Revision)

All grades except for the tests mentioned in remarks

4200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7, 20,Table 1,2,4 &6 ( C)	-
7, Table 1,2,4 &6 (Mn)	-
7, Table 1,2,4 &6 (S)	-
7, Table 1,2,4 &6 (P)	-
7, Table 1,2,4 &6 (Si)	-
7, Table 1,2,4 &6 (Ni)	-
7, Table 1,2,4 &6 (Cr)	-
7, Table 1,2,4 &6 (Mo)	-
8.2,15,17,22, Table 3,5 &7 (Tensile Tests,IS 1608 Part 1)	-
8.3,18, (Flattening Test)	-
6 (STRAIGHTNESS)	-
21 (Condition)	-
3.2.1 (Height of internal fin)	-
10 (Surface protection)	-

-
Facility not available for leak tightness test. Grade designation, type, class, condition to be declared. Chem- Complete for CDS but Partial for ERW,CEW (facility not available for micro alloying elements)

15448

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 12701 (1996)

Rotational moulded polyethylene water storage tanks - specification (First Revision)

6900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2.3 (Carbon Black Content )	-
4.2.3 (Carbon Dispersion Test)	-
5.1 Table 1 (Dimensioas of Cylinderical Vertical Tank)	-
5.1 Table 1 (Dimensioas of Cylinderical Vertical Tank)	-
5.1 Table 1 (Dimensioas of Cylinderical Vertical Tank)	-
5.1 Table 1 (Dimensioas of Cylinderical Vertical Tank)	-
5.1 Table 1 (Dimensioas of Cylinderical Vertical Tank)	-
5.1 Table 1 (Dimensioas of Cylinderical Vertical Tank)	-
5.1 Table 1 (Dimensioas of Cylinderical Vertical Tank)	-
5.1 Table 1 (Dimensioas of Cylinderical Vertical Tank)	-
5.2 Table 2 (Dimensions of Rectangular Loft Tanks)	-
5.2 Table 2 (Dimensions of Rectangular Loft Tanks)	-
5.2 Table 2 (Dimensions of Rectangular Loft Tanks)	-
5.2 Table 2 (Dimensions of Rectangular Loft Tanks)	-
5.2 Table 2 (Dimensions of Rectangular Loft Tanks)	-
5.2 Table 2 (Dimensions of Rectangular Loft Tanks)	-
5.3 (Types and Features )	-
7.1.1 (Resistance to Deformation)	-
7.1.2 (Resistance to Deformation)	-
7.2 (Resistance to Impact)	-
7.4 (Tensile Strength)	-
7.5 (Flexural Modulus)	-
7.6 (overall Migration)	-
6.1 (Finish)	-
9.2.1 (Man-Hole and Hand-Hole Lids)	-
9.2 (Man-Hole and Hand-Hole Lids)	-
9.1 (Lid Thickness)	-
7.3 (Test for Top Load Resistance)	-
6.1 (Finish)	-
5.4 (Wall Thickness above effective height)	-
5.2 Table 2 (7) (Minimum Wall Thickness)	-
5.1 Table 1 (7) (Minimum Weight of Tank (Without Lid))	-
9.1 (Man-Hole and Hand-Hole Lids)	-
7.6 (overall Migration)	-

-
Excluding: Available up to 3000 L capacity and except for Cl No 4.1 (Material) , 4.2(anti-oxidants), 4.2.1(density of resin), 4.2.2(melt flow rate), 4.3 (Reworked material).

15449

BIS, Patna Branch Laboratory (PBL)

None

IS 9295 (1983)

Specification for steel tubes for idlers for belt conveyors (First Revision)

Rs 5100/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1 (Sulphur- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-
7.1 (Phosphorous- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-
8.1.1 Table 1 (Tensile Strength- IS 1608(1))	-
8.1.1 Table 1 (Yield Strength- IS 1608)	-
8.1.1 Table 1 (Elongation Percent- IS 1608)	-
9.1 Table 2 (Outside Diameter)	-
9.1 Table 2 (Thickness)	-
9.1 Table 2 (Mass)	-
10 (Hardness)	-
13.1.1 (Ovality)	-
13.1.2 (Eccentricity)	-
15.1 (Straightness)	-
16.1 (Length)	-
17.1 (Surface Protection)	-

-
All test facilities are available as per the IS except i. Hardness Test (Clause 10)

15450

BIS, Patna Branch Laboratory (PBL)

None

IS 5986 (2017)

Hot rolled steel sheet, plate and strip for forming and flanging purposes - Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 (UTM)	-
Cl 15 (Length, Width & Thickness)	-
Cl 9 (Press)	-
Cl 13 (Workmanship)	-
7.1 (Carbon %)	-
7.1 (Manganese %)	-
7.1 (Phosphorus %)	-
7.1 (Sulphur %)	-
7.1 (Silicon %)	-
7.1 ( Nitrogen%)	-
7.1 (CE)	-
Cl. 8.3, Table 6 & 7 ( Elongation at 5.65√A Gauge length)	-
Cl. 8.3, Table 6 & 7 (Elongation at 80 mm gauge length)	-
Cl. 8.3, Table 6 & 7 (Elongation at 50 mm gauge length)	-
Cl. 8.3, Table 6 & 7 (Yield strength)	-

-
All test facilities are available as per the IS except- i) Hole Expansion Ratio Test (Clause 11) and ii. Impact Test (Clause 10) facility is out of order

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number