BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15122 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

1651

CIPET, Hajipur

5118334

IS 14252 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sack for filling sand – Specification (second revision)

19140 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Raw Material)	-	1050	-
3.2(Tapes – Width )	-	250	-
3.2(Tapes – Linear Density )	-	0.0	-
3.3(Tying Cord)	-	0.0	-
3.4(Sack)	-	0.0	-
3.4.1(Seam)	-	250	-
4.1 and Table 1 i a(Dimensions Outside Length)	-	250	-
4.1 and Table 1 i b(Dimensions Outside Width)	-	250	-
4.1 and Table 1 ii(Ends per dm )	-	250	-
4.1 and Table 1 iii(Picks per dm )	-	250	-
4.2 and Table 1 iv(Mass of sack )	-	300	-
4.1 and Table 1 v a(Average breaking strength of fabric Warpway )	-	1100	-
4.1 and Table 1 v b(Average breaking strength of fabric Weftway )	-	1100	-
4.1 and Table 1 vi(Average Breaking strength of bottom seam )	-	1100	-
4.1 and Table 1 vii a(Elongation at break of fabric Lengthwise)	-	1100	-
4.1 and Table 1 vii b(Elongation at break of fabric Widthwise )	-	1100	-
4.1 and Table 1 viii(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	12540	-
4.1 and Table 1 ix(Ash content )	-	950	-

07 Oct, 2028

-
-

1652

CIPET, Hajipur

5118334

IS 16208 (2015)

Textiles - High density polyethylene (HDPE)/polypropylene (PP) woven sacks for packaging 10 kg, 15 kg, 20 kg, 25 kg and 30 kg foodgrains - Specification

19480 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(TYPES)	-	0	-
4.1(Raw Material)	-	1050	-
4.2(Tapes – Width IS 6192 and IS 11197)	-	250	-
4.2(Tapes – Linear Density )	-	500	-
4.2(Construction)	-	0	-
4.3.1(Bottom Seam)	-	250	-
4.3.1( The two rows of stitches shall be separated from each other)	-	250	-
4.3.1( The outer stitch)	-	250	-
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	250	-
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	250	-
4.3.1(The number of stitches/dm)	-	250	-
4.3.2(Mouth)	-	250	-
4.4 and Table 1 i(Capacity)	-	250	-
5.2 and Table 1 ii a(Dimensions Inside Length)	-	250	-
5.2 and Table 1 ii b(Dimensions Inside Width)	-	250	-
5.2 and Table 1 iii(Ends per dm )	-	250	-
5.2 and Table 1 iv(Picks per dm )	-	250	-
5.1 and Table 1 v(Mass of sack )	-	250	-
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	1100	-
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise )	-	1100	-
5.2 and Table 1 vi(Breaking strength of bottom seam )	-	1100	-
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise)	-	1100	-
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise )	-	1100	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	12380	-
5.2 and Table 1 x(Ash content )	-	950	-

07 Oct, 2028

-
-

1653

CIPET, Hajipur

5118334

IS 2508 (2016)

Polyethylene films and sheets - Specification (Third Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(Appearance)	-	300	-
5.1.2(Film Form)	-	300	-
5.1.3(Odour)	-	300	-
5.1.4(Density, Cl.5 of IS 13360(Part-3/Section-1))	-	500	-
5.1.5(Melt Flow Index. Cl 6, 7 of IS 13360(Part-4/Section-1))	-	1100	-
5.1.6a(Carbon Black Content, Annex-A)	-	925	-
5.1.6b(Ash Content, Annex-A)	-	950	-
5.1.6c(Carbon Black Dispersion, Cl.16 of IS 2530)	-	700	-
5.2.2(Tolerance on Thickness, Annex-A)	-	250	-
6.1, Table 1(Tensile strength at break. A) Machine Direction. IS 13360 (Part 5/Sec 1))	-	1100	-
6.1, Table 1(Tensile strength at break. B) Transverse Direction. IS 13360 (Part 5/Sec 3))	-	1100	-
6.1, Table 1(Ageing test at (70-1)c for 7 days , cl 4 IS 7016 )	-	4200	-
6.1, Table 1(Elongation at break ,A) Machine direction .IS 13360(Part-5/sec-1) )	-	1100	-
6.1, Table 1(Elongation at break ,B) Cross-machine direction..IS 13360(Part-5/sec-3) )	-	1100	-
6.1, Table 1(Dartimpact strength Method B of IS 13360 (Part-5/sec-6) )	-	1100	-
6.1, Table 1(Tear resistence. A) Machine direction Annex B)	-	1000	-
6.1, Table 1(Tear resistence. B) Transverse direction )	-	1000	-
7.1. Table 2(Tensile strength at break A) Machine direction IS 13360 (Part-5/sec-1) )	-	1100	-
7.1. Table 2(Tensile strength at break,B) Crosse machine direction IS 13360 (Part-5/sec-3) )	-	1100	-
7.1. Table 2(Ageing test at (70-1)c for 7 days , cl 4 IS 7016 )	-	4200	-
7.1. Table 2(Elongation at break , A) Machine direction IS 13360 (Part-5/sec-3) IS 13360 (Part-5/sec-1) )	-	1100	-
7.1. Table 2(Elongation at break , A) Transverse direction IS 13360 (Part-5/sec-3) )	-	1100	-
7.1. Table 2(Dart impact strenght , Method A of IS 3360 (Part-5/sec-6) )	-	1100	-
8.1, Table 3(Tensile properties ,A) Yield strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	1100	-
8.1, Table 3(Tensile properties , B) Break strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	1100	-
8.1, Table 3(Tensile properties ,C) Yield elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	1100	-
8.1, Table 3(Tensile properties ,D) Break elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	1100	-
8.1, Table 3(Tear resistance , Annex B)	-	2000	1500+500
8.1, Table 3(Puncture resistance , Annex C)	-	1350	1100+250
9.1, Table 4(Tensile properties ,A) Yield strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	1100	-
9.1, Table 4(Tensile properties , B) Break strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	1100	-
9.1, Table 4(Tensile properties ,C) Yield elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	1100	-
9.1, Table 4(Tensile properties ,D) Break elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	1100	-
9.1, Table 4(Tear resistance , Annex B)	-	2000	1500+500
9.1, Table 4(Puncture resistance , Annex C)	-	1350	1100+250
Clause 9.1 (Table 4)(Break Elongation)	-	1100	-
Clause 9.1 (Table 4)(Yield Elonation)	-	1100	-
Clause 9.1 (Table 4)(Break strength)	-	1100	-
Clause 9.1 (Table 4)(Yield strength)	-	1100	-
Clause 8.1(Table 3)(Break Elongation)	-	1100	-
Clause 8.1(Table 3)(Break strength)	-	1100	-
Clause 7.1(Table 2)(Dart Impact Strength)	-	1100	-
Clause 7.1(Table 2)(Decrease in Tensile Strength after Ageing(Transverse Direction))	-	1100	-
Clause 7.1(Table 2)(Decrease in Tensile Strength after Ageing(Machine Direction))	-	1100	-
Clause 6.1(Table 1)(Decrease in Tensile Strength after Ageing(Transverse Direction))	-	1100	-
Clause 6.1(Table 1)(Decrease in Tensile Strength after Ageing(Machine Direction))	-	1100	-
Clause 5.2.3(Tolerance on Width)	-	250	-

07 Oct, 2028

-
-

1654

CIPET, Hajipur

5118334

IS 12786 (1989)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification

9725 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0 5.1 (Table1) (Dimensions a)Outside diameter of pipe)	-	250.0	Dimension All - 250 (OD, Wall Thickness, Tolerance etc)
5.0 5.1 (Table1) (b)Tolerance on OD)	-	250	Dimension All - 250 (OD, Wall Thickness, Tolerance etc)
5.0 5.1 (Table1) (c)Wall thickness of pipe Minimum)	-	250	Dimension All - 250 (OD, Wall Thickness, Tolerance etc)
5.0 5.1 (Table1) (c)Wall thickness of pipe Maximum)	-	250	Dimension All - 250 (OD, Wall Thickness, Tolerance etc)
6.0 (6.1) (Visual appearance)	-	300.0	-
7.1 Table-2 (Hydraulic Characteristics a)Quality Test for 100 hours at 70°C & 2.5.MPa induced stress. )	-	3000.0	-
7.1 Table-2 (b)Acceptance Test for 01 hour at 20°C & 6.9MPa induced stress)	-	1000.0	-
8.0 (8.1) (Supply of pipes )	-	0.0	Charges include in visual Appearance
9.0 (9.1)(Coiling )	-	0.0	Charges include in visual Appearance
9.0 (9.1)(Minimum Internal Diameter of Coil)	-	0.0	Charges include in Dimension
3.1(Class of Pipe)	-	0.0	Charges include in visual Appearance
6.1(Visual Appearance)	-	300.0	-
7.2(Reversion Test)	-	1000	Testing Charges - 700 Specimen Charges - 300 Total Charges - 1000
5 and Table 1(DIMENSIONS OF PIPES - wall thickness shall)	-	0.0	-
5 and Table 1(DIMENSIONS OF PIPES - outside diameters)	-	0.0	-
7.4(SusceptibiIity to Environmental Stress Cracking)	-	1200.0	0.0
7.3(Elongation at Break)	-	1350.0	Testing Charges - 1100 Specimen Charges - 250 Total Charges - 1350 Charges include for tensile test
7.3(Tensile Test)	-	0.0	Charges include in Elongation at Break
4.3(Addition of not more than 10 percent of the manufactures own rework material produced during the manufacture and works testing of pipe complying with this standard is permitted. No other rework material shall be used)	-	700	-
4.2.b (The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	700	-
4.1.c & 4.2.a (Carbon Black content - IS 2530 : 1963)	-	925	-
4.1.c.i (Density)	-	1125	Testing Charges - 500 Specimen Charges - 625

07 Oct, 2028

-
-

1655

CIPET, Hajipur

5118334

IS 12701 (1996)

Rotational moulded polyethylene water storage tanks - specification (First Revision)

17150.0 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.3(Carbon Black Content )	-	925.0	-
4.2.3(Carbon Dispersion Test)	-	700.0	-
5(Types and Features )	-	0.0	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	3050.0	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	0.0	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	0.0	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	0.0	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	0.0	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	0.0	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	0.0	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	0.0	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	3050.0	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	0.0	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	0.0	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	0.0	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	0.0	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	0.0	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	0.0	-
5.3(Types and Features )	-	0.0	-
5.6(Types and Features )	-	0.0	-
6.1(Finish)	-	300.0	-
7.1.1(Resistance to Deformation)	-	700.0	-
7.1.2(Resistance to Deformation)	-	700.0	-
7.2(Resistance to Impact)	-	1100.0	-
7.3(Test for Top Load Resistance)	-	900.0	-
7.4(Tensile Strength)	-	1350.0	1100+250(Specimen Charges)
7.5(Flexural Modulus)	-	1600.0	1100+500 (Specimen Charge)
7.6(overall Migration)	-	2200.0	1700+500 (Specimen Charges)
9.2.1(Man-Hole and Hand-Hole Lids)	-	1050.0	-
9.2(Man-Hole and Hand-Hole Lids)	-	0.0	-
9.1(Man-Hole and Hand-Hole Lids)	-	250.0	-
9.1(Lid Thickness)	-	250.0	-
7.3(Test for Top Load Resistance)	-	900.0	-
6.1(Finish)	-	300.0	-
5.4(Wall Thickness above effective height)	-	250.0	-
5.2 Table 2 (7)(Minimum Wall Thickness)	-	250.0	-
5.1 Table 1 (7)(Minimum Weight of Tank (Without Lid))	-	500.0	-

07 Oct, 2028

-
-

1656

CIPET, Hajipur

5118334

IS 14333 (1996)

High Density Polyethylene Pipe For Sewerage -

11475 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10(Marking)	-	300	Including Visual appearance, color Designation)
3(Designation)	-	0.0	Include in Marking
4(Colour)	-	0.0	Include in Marking
6(Dimensions of pipes)	-	250.0	-
7(Visual Appearance)	-	0.0	Include in Marking
8.1(Hydraulic characteristics)	-	6400.0	a) Acceptance Test - 1600 b) Type Test - 4800
8.2(Reversion)	-	700	Testing Charges - 700 Specimen Charges - 300
8.3(Density)	-	500	-
8.4(Melt Flow Rate)	-	1100	-
Cl. 8.5, IS 2530-1963, Cl. 10(Cabon Black Content)	-	925	-
Cl. 8.5, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	700	-

07 Oct, 2028

-
-

1657

CIPET, Hajipur

5118334

IS 14151 : Part 1 (1999)

Irrigation equipment - Sprinkler pipes - Specification: Part 1 polyethylene pipes (First Revision)

19175 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.3(CLASSIFICATION OF PIPES)	-	0	-
4.1(melt flow rating (MFR) shall not exceed 1.10 g/10 min.)	-	1100	-
4.1.1(density shall be between 940.4 kg/m’ and 958.4 kg/m3 (both inclusive) when determined at 27°C according to procedure prescribed in Annex A of IS 7328. The value of the density shall also not differ from the nominal value by more than 3 kg/m2 as per 5.2.1.1 of IS 7328.)	-	1125	625 + 500
4.1.2(The MFR of the material shall be between 0.2 to 1.1 (both inclusive) when tested at 190 T at a nominal load of 50 N by the method prescribed in 7 of IS 2530. The MFR of the material shall also be within 20% of the value declared by the manufacturer.’)	-	1100	-
Cl. 4.2 , IS 2530-1963, Cl. 10(Cabon Black Content)	-	925	-
4.3(Anti-oxidant)	-	1100	-
5.1 table -1(DIMENSIONS OF PIPES)	-	500	-
5.1.2(Ovality)	-	0	-
6.1(VISUAL APPEARANCE)	-	300	-
7.1 Table -2(Hydraulic Characteristics)	-	0.0	-
7.2(Reversion Test)	-	1000	700 + 300 (specimen charges)
7.3(Tensile Test)	-	1350	1100 + 250 (specimen charges)
7.4table-2(Fusion Compatibility Test)	-	6400	-
7.5(Density)	-	500	-
7.6(Melt now Rate (MFR))	-	1100	-
(Cl.4.2)(Carbon black- b) Dispersion of carbon black)	-	700	-
(Cl.4.2)(Carbon black- a)carbon content)	-	925	-
Cl.7.4(Fusion Compatibility Test- b) Acceptance test)	-	1600	-
Cl.7.4(Fusion Compatibility Test- a) Quality test)	-	4800	-
Cl.7.3(Tensile Test - ii)Elongation at Break)	-	1350	1100 + 250 (specimen charges)
Cl 7.1(Hydraulic Characteristics - Acceptance test)	-	1600	-
Cl 7.1(Hydraulic Characteristics - Quality test)	-	4800	-
Cl.6(Visual Appearance)	-	300	-
Cl.5(Dimensions of pipe - ii) Wall thickness maximum)	-	0	-
Cl.5(Dimensions of pipe - ii) Wall thickness minimum)	-	0	-
Cl.5(Dimensions of pipe - i) Outside diameter)	-	0	-

07 Oct, 2028

-
-

1658

Mbis Tescon Private Limited

8190506

IS 17546 (2021)

Chlorinated polyvinyl chloride CPVC fittings for potable hot and cold water distribution supplies Specification

All variety

85000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Dimensions of fitting)	-	3000	Fittings :85000 & Raw material 20000 for bis testing charges and for others 1.5 times of bis testing charges
8.2(Opacity)	-	1500	-
8.1(Visual Appearance)	-	200	-
8.4(Vicat softening Temperature)	-	2000	-
8.3(Stress Relief Test)	-	2000	-
8.5(Density)	-	500	-
8.6(Effect on water)	-	5000	-
9(Mechanical Properties)	-	0	-
11(Marking)	-	0	-
Cl-6.2.2(Compound Chlorine Content)	-	2000	-
Cl-6.2.5(Verification of the Malfunction Temperature)	-	18000	-
Cl-9.1(Hydrostatic Characteristics)	-	29000	-
Cl-9.2(Thermal Stability by Hydrostatic Pressure Testing)	-	28000	-
6(Composition)	-	20000	-
3.1(Nominal Size(DN))	-	200	-
3.2(Nominal Outside Diameter)	-	200	-
3.3(Mean Inside Diameter of Socket at Entry)	-	200	-
3.4(Mean Inside Diameter of Socket at Shoulder (Bottom))	-	200	-
3.4(Mean Inside Diameter of Socket at Shoulder (Bottom))	-	200	-
3.5(Out-of-Roundness (Ovality))	-	200	-
3.6(Nominal Wall Thickness)	-	200	-
3.7(Minimum Wall Thickness)	-	200	-
3.8(Tolerance)	-	200	-
3.9(Working Pressure)	-	0	-
3.11(Type Tests)	-	60000	-
3.11(Acceptance Tests)	-	50000	-
3.1(Standard Dimension Ratio)	-	200	-

-
Included w.e.f 24.12.2025

1659

Mbis Tescon Private Limited

8190506

IS 15328 (2003)

Unplasticized Non-Pressure Polyvinyl Chloride ( PVC -U ) Pipes for use in Underground Drainage and Sewerage Systems -

All variety upto size 500 mm

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5,5.2(Composition of the material The material shall contain a minimum of 0.3 percent of rutile grade titanium dioxide.)	-	5000	pipe :16000 & Resin :5000 for bis testing charges and for others 1.5 times of bis testing charges
6.1,6.1.1 IS 12235 (Part 1) Table 1(Dimension of Pipes: Mean outside Diameter, dem)	-	200	-
6.1,6.1.1 IS 12235 (Part 1) Table 1(Outside Diameter at any point, de)	-	200	-
6.1.2 IS 4985 Table 2(Wall Thickness, e )	-	200	-
6.1.3 (Length of Pipe)	-	200	-
6.1.4, Table 3(Dimensions of integral sockets and spigot ends :- a) Elastomeric Sealing Ringsockets and spigot ends i)Meean inside dia. Of socket, dsm)	-	200	-
6.1.4, Table 3(ii) Min. depth of engagement, A. )	-	200	-
6.1.4 Table 3(iii) Depth of sealing Zone C )	-	200	-
6.1.4, Table 3(iv) Length of spigot, l1)	-	200	-
6.1.4, Table 3(v) Chamfer length, H : Approx.)	-	200	-
6.1.4.1 (wall thickness of sockets e2 min=0.9e )	-	200	-
6.1.4.1 (e3min=0.75e)	-	200	-
6.1.4, Table 4(b) Solvent Cement Joint sockets and spigot ends i) Mean inside dia. Of socket, dsm)	-	200	-
6.1.4, Table 4(ii) Length of Solvent Cement socket, l2 )	-	200	-
6.1.4, Table 4(iii) Length of spigot, l1, 100 mm Min.)	-	200	-
6.1.4, Table 4(iv) Chamfer length, H, 7 mm Approx.)	-	200	-
7(Physical characteristics )	-	0	-
7.1(Appearance:- )	-	200	-
7.1(Appearance:- )	-	200	-
7.2(Colour )	-	200	-
7.3 IS 1223S ( Part 2)(Vicat Softening Temperature When determined according to IS 1223S ( Part 2), shall not be lessthan 79°C.)	-	1500	-
7.4 IS 1223S ( Part 5)(Longitudinal Reversion: When tested according to the methodprescribed in IS 1223S ( Part 5), shall not exceed ± 5 percent. The pipe shall not exhibit any blisters, bubbles or crackson completion of the test.)	-	1500	-
8(MECHANICAL CHARACTERISTICS)	-	0	-
8.1 Annex B(Resistance to External Blows at 0ºC: When tested according to the method prescribed in Annex B, the pipes hall have a true impact rate of not more than I0 percent.)	-	2000	-
8.2 Annex C Table 5(Ring Stiffness: When tested according to the method described in Annex C,the ring stiffness of the pipe shall be as stated in Table 5)	-	2000	-
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(Resistance to internal Hydrostatic Pressure(Type Test) a) Acceptance Test:(1h at 27 0 C) )	-	2000	-
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(b) Type Test:(1000h at 60 0 C) )	-	5000	-
9 9.1, IS 5382(JOINTS:- a) Elastomeric Sealing Rings)	-	2000	-
9.2 IS 14182(b) Solvent cement)	-	0	-
10(Performance requirements)	-	0	-
10.1.1 Annex D(Internal hydrostatic pressure test for elastomeric sealing ring joints)	-	1000	-
10.1.2 Annex E(Internal negative hydrostatic pressure test (internal vacuum) for elastomeric sealing ring joints)	-	1000	-
'7.5 (amdt.7)(Effect on Water (Type test))	-	5000	-
5.3(Qualitative)	-	0	-
12(Marking)	-	100	-
10.2.1(Internal hydrostatic pressure test for solvent cemented Joints)	-	0	-
10.2.2(Internal negative hydrostatic pressure test (internal vacuum)for solvent cemented joints)	-	0	-

-
Included w.e.f 24.12.2025

1660

Mbis Tescon Private Limited

8190506

IS 15778 (2007)

Chlorinated polyvinyl chloride (Cpvc) pipes for potable hot and cold water distribution supplies - Specification

All Variety

85000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1 IS 12235 (Part 1) Table 2(Dimension of Pipes: Mean outside Diameter)	-	200	PIPE :85000, raw materail:20000 for bis testing chrges and for others 1.5 time of bis testing charges
7.1,7.1.1 IS 12235 (Part 1) Table 2(Outside Diameter at any point)	-	200	-
7.1.2 IS 12235 (Part 1) Table 2(Wall Thickness )	-	200	-
7.1.3 (Effective length)	-	200	-
8(Pipe Ends)	-	500	-
9(PHYSICAL AND CHEMICAL CHARACTERISTICS)	-	0	-
9.1(Visual Appearance)	-	200	-
9.1(Visual Appearance)	-	200	-
9.2 IS 12235 (Part 3)(Opacity)	-	1000	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (first extraction))	-	1000	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (third extraction))	-	1000	-
Cl. 9.3,IS 4985 Cl. 10.3(Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	1000	-
Cl. 9.3,IS 4985 Cl. 10.3(Cadmium (for all three extracts) )	-	1000	-
Cl. 9.3,IS 4985 Cl. 10.3(Mercury (for all three extracts) )	-	1000	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction) )	-	1000	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances including di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate')	-	1000	-
9.4 IS 12235(Part 5/Sec 1 and Sec 2)(Reversion Test : When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.)	-	1500	-
9.5 IS 12235(Part 2)(Vicat Softening Temperature: When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen shall not be less than 110°C.)	-	1500	-
9.6 IS 12235(Part 14)(Density)	-	500	-
10(Mechanical Properties)	-	0	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	3000	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	18000	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	8000	-
10.2 Table 3 IS 12235 (Part 8/Sec 1)(Thermal Stability by Hydrostatic Pressure Testing)	-	28000	-
10.3 IS 4985 Table 4(Resistance to External Blow at O°C: When tested by the method prescribed in IS 4985, with classified striker mass and drop height as given in Table 4, the pipe shall have a true impact rate of not more than 10 percent.)	-	2000	-
10.4 IS 12235(Part 19)(Flattening Test)	-	2000	-
10.5 IS 12235(Part 13)(Tensile Strength : When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C. )	-	2000	-
5 Table 1(Classification of pipes)	-	0	-
6.2.1 Annex B(Chloride Content of Resin)	-	2000	-
6.3(Compound Properties)	-	20000	-
6.3.1 Annex B(Chloride content)	-	2000	-
6.3.2 Annex C(Verification of the Malfunction Temperature, Tmal: )	-	18000	-
6.3(K value Test)	-	2000	-
6.3.3(Density)	-	500	-
5 Table 1(Classification of pipes)	-	0	-
6.2.1 Annex B(Chloride Content of Resin)	-	0	-
6.3(Compound Properties)	-	0	-
6.3.1 Annex B(Chloride content)	-	0	-
6.3.2 Annex C(Verification of the Malfunction Temperature, Tmal: )	-	0	-
6.3.2 IS 13360 (Part 3/See 1)(Density)	-	0	-
7.1 IS 12235 (Part 1) Table 2(Dimension of Pipes: Mean outside Diameter)	-	0	-
7.1,7.1.1 IS 12235 (Part 1)Table 2(Outside Diameter at any point (Minimum))	-	0	-
7.1.2 IS 12235 (Part 1)Table 2(Wall Thickness (Minimum))	-	0	-
7.1.3 (Effective length)	-	0	-
8.0(Pipe Ends)	-	0	-
9.0(PHYSICAL AND 1CHARACTERISTICS)	-	0	-
9.1(Visual Appearance)	-	0	-
9.1(Visual Appearance)	-	0	-
9.2 IS 12235 (Part 3)(Opacity)	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (first extraction))	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (third extraction))	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Cadmium (for all three extracts) )	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Mercury (for all three extracts) )	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction) )	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances including di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate')	-	0	-
9.4 IS 12235(Part 5/Sec 1 and Sec 2)(Reversion Test : When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.)	-	0	-
9.5 IS 12235(Part 2)(Vicat Softening Temperature: When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen shall not be less than 110°C.)	-	0	-
9.6 IS 12235(Part 14)(Density)	-	0	-
10.0(Mechanical Properties)	-	0	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	0	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	0	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	0	-
10.2 Table 3 IS 12235 (Part 8/Sec 1)(Thermal Stability by Hydrostatic Pressure Testing)	-	0	-
10.3 IS 4985 Table 4(Resistance to External Blow at O°C: When tested by the method prescribed in IS 4985, with classified striker mass and drop height as given in Table 4, the pipe shall have a true impact rate of not more than 10 percent.)	-	0	-
10.4 IS 12235(Part 19)(Flattening Test)	-	0	-
10.5 IS 12235(Part 13)(Tensile Strength : When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C. )	-	0	-
7.1.2(Wall Thickness (Maximum))	-	0	-
7.1.1(Outside Diameter at any point (Maximum))	-	0	-
6.3.2 IS 13360 (Part 3/See 1)(Density)	-	0	-

-
Included w.e.f 24.12.2025

1661

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 7494 (2023)

ALLOYS FOR INTERNAL COMBUSTION ENGINE VALVE APPLICATIONS ï¿½ SPECIFICATION (Second Revision)

24500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 5.0(classification.)	-	0	-
Clause. 5.0(manufacture)	-	0	-
Clause. 5.0(Product Designations)	-	0	-
Clause. 7.0(Carbon)	-	500	-
Clause. 7.0(Silicon)	-	500	-
Clause. 7.0(Manganese.)	-	500	-
Clause. 7.0(Phosphorus)	-	500	-
Clause. 7.0(Chromium)	-	500	-
Clause. 7.0(Nickel)	-	500	-
Clause. 7.0(Molybednum)	-	500	-
Clause. 7.0(Vanadium)	-	500	-
Clause. 7.0(Neobium)	-	500	-
Clause. 7.0(Titanium)	-	500	-
Clause. 7.0(Nitrogen)	-	500	-
Clause. 7.0(Tungsten.)	-	500	-
Clause. 7.0(Other)	-	1000	-
Clause. 7.0(Aluminium)	-	500	-
Clause.9.0(Tensile Test)	-	2500	-
Clause.9.0(Proof Stress)	-	2000	-
Clause.9.0(Elongation)	-	1500	-
Clause.9.0(Brinell Hardness)	-	2500	-
Clause.8.0(Freedom from defect)	-	1500	-
Clause.10.0(Grain size)	-	2500	-
Clause.11.0(Non-metallic inclusion.)	-	3500	-
Clause.12.0(Physical propertise)	-	2000	-
Cluase.13.0(Dimensions and tolerances.)	-	2500	-
Clause 14.0(Sampling.)	-	0	-
Clause 14.2(Hardness test.)	-	0	-
Clause 14.3(Tensile Test)	-	0	-
Clause 16.0(Packing and marking.)	-	0	-

08 Feb, 2027

-
Included w.e.f. 23.01.2026

1662

ARYAVRAT TEST HOUSE PRIVATE LIMITED

5191706

IS 1161 (2014)

Steel tubes for structural purposes - Specification (Fifth Revision)

All Type

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6(Outer Diameter, Thickness & Mass)	-	500	-
Cl 7(Workmanship)	-	500	-
Cl 8(Workmanship)	-	500	-
Cl 9(Workmanship)	-	500	-
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	3000	-
Cl 13(Workmanship)	-	500	-
Cl 6(Outer Diameter, Thickness & Mass)	-	500	-
Cl 7(Workmanship)	-	500	-
Cl 8(Workmanship)	-	500	-
Cl 9(Workmanship)	-	500	-
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	3000	-
Cl 13(Workmanship)	-	500	-
Cl 6(Outer Diameter, Thickness & Mass)	-	500	-
Cl 7(Workmanship)	-	500	-
Cl 8(Workmanship)	-	500	-
Cl 9(Workmanship)	-	500	-
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	3000	-
Cl 13(Workmanship)	-	500	-
8 AND AS PER IS 4736(UNIFORMITY OF ZINC COATING)	-	1500	-
8 AND AS PER IS 4736(MASS OF ZINC COATING)	-	1500	-
5 AND AS PER IS 10748(COPPER)	-	500	-
5 AND AS PER IS 10748(MICRO ALLOY)	-	500	-
5 AND AS PER IS 10748(CARBON EQUIVALENT)	-	500	-
5 AND AS PER IS 10748(CARBON)	-	500	-
Clause - 5.1, Table-3( ALUMINIUM)	-	500	-
Clause - 5.1, Table-3(SILICON)	-	500	-
Clause - 5.1, Table-3(NITROGEN)	-	500	-
Clause - 5.1, Table-3(MANGANESE)	-	500	-
Clause - 5.1, Table-3(PHOSPHURS)	-	500	-
Clause - 5.1, Table-3(SULPHUR)	-	500	-
Clause - 5.1, Table-3( CARBON)	-	500	-
9(Straightness)	-	2000	-
Cl 11.3.1(Cold bend test (upto & including 50 mm NB))	-	2000	-
Cl. 11.2 Table 2(Elongation)	-	1000	-
Cl. 11.2 Table 2(Yield strength)	-	3000	-
Cl. 6 , 6.2 Table 1(Square of radius of gyyration)	-	500	-
Cl. 6 , 6.2 Table 1(Radius of gyration)	-	500	-
Cl. 6 , 6.2 Table 1(Modulus of section)	-	200	-
Cl. 6 , 6.2 Table 1(Moment of inertia)	-	200	-
Cl. 6 , 6.2 Table 1(Surface internal)	-	200	-
Cl. 6 , 6.2 Table 1(Surface external)	-	200	-
Cl. 6 , 6.2 Table 1(Internal volume)	-	500	-
Cl. 6 , 6.2 Table 1(Area of cross section)	-	500	-
Cl. 6 , 6.2 Table 1(Weight)	-	500	-
Cl. 6 , 6.2 Table 1(Thickness)	-	500	-
Clause 11.2, Table -2(Elongation)	-	1000	-
Clause 11.2, Table -2(Yield Strength)	-	3000	-
Cl 13(Workmanship)	-	500	-
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	3000	-
Cl 9(Workmanship)	-	500	-
Cl 8(Workmanship)	-	500	-
Cl 7(Workmanship)	-	500	-
Cl 6(Outer Diameter, Thickness & Mass)	-	500	-
Cl 6(Outer Diameter, Thickness & Mass)	-	500	-
Cl 7(Workmanship)	-	500	-
Cl 8(Workmanship)	-	500	-
Cl 9(Workmanship)	-	500	-
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	3000	-
Cl 13(Workmanship)	-	500	-
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Outer Diameter - SOP MT-23)	-	500	-
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Thickness - SOP MT-23)	-	500	-
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Mass - SOP MT-23)	-	500	-
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Area of Cross Section - SOP MT-23)	-	500	-
8.0(Mass of Zinc coating - IS:6745)	-	1000	-
8.0(Freedom from defects - IS 4736)	-	1000	-
8.0(Uniformity of galvanized coating - IS 4736)	-	1500	-
8.0(Adhesion test-Pivoted Hammer Test - IS 4736)	-	1500	-
13.0(Oiling and Painting - Visual)	-	100	-
12(Marking)	-	100	-
CL 6("1.Outer dia (04) 2.Thickness (08)")	-	500	-
CL 06(Minimum Outer dia (04))	-	500	-
CL 06(Maximum Outer dia (04))	-	500	-
CL 06(" Minimum Thickness (08)")	-	500	-
CL 06(Maximum Thickness (08))	-	500	-
10(Lengths)	-	500	-
Cl 11.3.1(Flattening test (over 50 mm NB))	-	500	-
Cl 6(Outer Diameter, Thickness & Mass)	-	500	-
Cl 7(Workmanship)	-	500	-
Cl 8(Workmanship)	-	500	-
Cl 9(Workmanship)	-	500	-
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	500	-
Cl 13(Workmanship)	-	500	-
Cl 6(Outer Diameter, Thickness & Mass)	-	500	-
Cl 7(Workmanship)	-	500	-
Cl 8(Workmanship)	-	500	-
Cl 9(Workmanship)	-	500	-
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	500	-
Cl 13(Workmanship)	-	500	-
Cl 6(Outer Diameter, Thickness & Mass)	-	500	-
Cl 7(Workmanship)	-	500	-
Cl 8(Workmanship)	-	500	-
Cl 9(Workmanship)	-	500	-
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	500	-
Cl 13(Workmanship)	-	500	-
9(Straightness)	-	500	-
Cl 11.3.1(Cold bend test (upto & including 50 mm NB))	-	500	-
Cl. 11.2 Table 2(Elongation)	-	500	-
Cl. 11.2 Table 2(Yield strength)	-	500	-
Cl. 6 , 6.2 Table 1(Square of radius of gyyration)	-	500	-
Cl. 6 , 6.2 Table 1(Radius of gyration)	-	500	-
Cl. 6 , 6.2 Table 1(Modulus of section)	-	500	-
Cl. 6 , 6.2 Table 1(Moment of inertia)	-	500	-
Cl. 6 , 6.2 Table 1(Surface internal)	-	500	-
Cl. 6 , 6.2 Table 1(Surface external)	-	500	-
Cl. 6 , 6.2 Table 1(Internal volume)	-	500	-
Cl. 6 , 6.2 Table 1(Area of cross section)	-	500	-
Cl. 6 , 6.2 Table 1(Weight)	-	500	-
Cl. 6 , 6.2 Table 1(Thickness)	-	500	-
Clause 11.2, Table -2(Elongation)	-	500	-
Clause 11.2, Table -2(Yield Strength)	-	500	-
Cl 13(Workmanship)	-	500	-
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	500	-
Cl 9(Workmanship)	-	500	-
Cl 8(Workmanship)	-	500	-
Cl 7(Workmanship)	-	500	-
Cl 6(Outer Diameter, Thickness & Mass)	-	500	-
Cl 6(Outer Diameter, Thickness & Mass)	-	500	-
Cl 7(Workmanship)	-	500	-
Cl 8(Workmanship)	-	500	-
Cl 9(Workmanship)	-	500	-
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	500	-
Cl 13(Workmanship)	-	500	-
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Outer Diameter - SOP MT-23)	-	500	-
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Thickness - SOP MT-23)	-	500	-
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Mass - SOP MT-23)	-	500	-
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Area of Cross Section - SOP MT-23)	-	500	-
8.0(Mass of Zinc coating - IS:6745)	-	500	-
8.0(Freedom from defects - IS 4736)	-	500	-
8.0(Uniformity of galvanized coating - IS 4736)	-	500	-
8.0(Adhesion test-Pivoted Hammer Test - IS 4736)	-	500	-
13.0(Oiling and Painting - Visual)	-	500	-
12(Marking)	-	500	-
CL 6("1.Outer dia (04) 2.Thickness (08)")	-	500	-
CL 06(Minimum Outer dia (04))	-	500	-
CL 06(Maximum Outer dia (04))	-	500	-
CL 06(" Minimum Thickness (08)")	-	500	-
CL 06(Maximum Thickness (08))	-	500	-
10(Lengths)	-	500	-
Cl 11.3.1(Flattening test (over 50 mm NB))	-	500	-
Cl 6(Outer Diameter, Thickness & Mass)	-	500	-
Cl 7(Workmanship)	-	500	-
Cl 8(Workmanship)	-	500	-
Cl 9(Workmanship)	-	500	-
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	500	-
Cl 13(Workmanship)	-	500	-
Cl 6(Outer Diameter, Thickness & Mass)	-	500	-
Cl 7(Workmanship)	-	500	-
Cl 8(Workmanship)	-	500	-
Cl 9(Workmanship)	-	500	-
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	500	-
Cl 13(Workmanship)	-	500	-
Cl 6(Outer Diameter, Thickness & Mass)	-	500	-
Cl 7(Workmanship)	-	500	-
Cl 8(Workmanship)	-	500	-
Cl 9(Workmanship)	-	500	-
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	500	-
Cl 13(Workmanship)	-	500	-
9(Straightness)	-	500	-
Cl 11.3.1(Cold bend test (upto & including 50 mm NB))	-	500	-
Cl. 11.2 Table 2(Elongation)	-	500	-
Cl. 11.2 Table 2(Yield strength)	-	500	-
Cl. 6 , 6.2 Table 1(Square of radius of gyyration)	-	500	-
Cl. 6 , 6.2 Table 1(Radius of gyration)	-	500	-
Cl. 6 , 6.2 Table 1(Modulus of section)	-	500	-
Cl. 6 , 6.2 Table 1(Moment of inertia)	-	500	-
Cl. 6 , 6.2 Table 1(Surface internal)	-	500	-
Cl. 6 , 6.2 Table 1(Surface external)	-	500	-
Cl. 6 , 6.2 Table 1(Internal volume)	-	500	-
Cl. 6 , 6.2 Table 1(Area of cross section)	-	500	-
Cl. 6 , 6.2 Table 1(Weight)	-	500	-
Cl. 6 , 6.2 Table 1(Thickness)	-	500	-
Clause 11.2, Table -2(Elongation)	-	500	-
Clause 11.2, Table -2(Yield Strength)	-	500	-
Cl 13(Workmanship)	-	500	-
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	500	-
Cl 9(Workmanship)	-	500	-
Cl 8(Workmanship)	-	500	-
Cl 7(Workmanship)	-	500	-
Cl 6(Outer Diameter, Thickness & Mass)	-	500	-
Cl 6(Outer Diameter, Thickness & Mass)	-	500	-
Cl 7(Workmanship)	-	500	-
Cl 8(Workmanship)	-	500	-
Cl 9(Workmanship)	-	500	-
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	500	-
Cl 13(Workmanship)	-	500	-
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Outer Diameter - SOP MT-23)	-	500	-
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Thickness - SOP MT-23)	-	500	-
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Mass - SOP MT-23)	-	500	-
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Area of Cross Section - SOP MT-23)	-	500	-
8.0(Mass of Zinc coating - IS:6745)	-	500	-
8.0(Freedom from defects - IS 4736)	-	500	-
8.0(Uniformity of galvanized coating - IS 4736)	-	500	-
8.0(Adhesion test-Pivoted Hammer Test - IS 4736)	-	500	-
13.0(Oiling and Painting - Visual)	-	500	-
12(Marking)	-	500	-
CL 6("1.Outer dia (04) 2.Thickness (08)")	-	500	-
CL 06(Minimum Outer dia (04))	-	500	-
CL 06(Maximum Outer dia (04))	-	500	-
CL 06(" Minimum Thickness (08)")	-	500	-
CL 06(Maximum Thickness (08))	-	500	-
10(Lengths)	-	500	-
Cl 11.3.1(Flattening test (over 50 mm NB))	-	500	-

28 Nov, 2028

-
Included w.e.f. 17.03.2026

1663

AANKAN CALIBRATION AND TESTING CENTRE LLP, DANTLI

7184406

IS 3087 (2025)

Medium Density Particle Boards of Wood and other Lignocellulosic Materials for General Purpose - Specification ( Third Revision )

19500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 7(Finish --IS 2380 (Part 2), IS 2380 (Part 3) & Visual)	-	500	Rs- 19500/-
As per Clause 8, Table 2(Length -IS 2380 (Part 2))	-	500	Rs- 19500/-
As per Clause 8, Table 2(Width - IS 2380 (Part 2))	-	500	Rs- 19500/-
As per Clause 8, Table 2(Thickness, Sanded/finished panel - IS 2380 (Part 2))	-	500	Rs- 19500/-
As per Clause 8, Table 2(Squareness, Max. - IS 2380 (Part 2))	-	500	Rs- 19500/-
As per Clause 8, Table 2(Edge straightness, Max. -IS 2380 (Part 2))	-	500	Rs- 19500/-
As per Clause 9.1 Table 3(Density -IS 2380 (Part 3))	-	1000	Rs- 19500/-
As per Clause 9.1 Table 3(Variation from mean density, --IS 2380 (Part 3))	-	1000	Rs- 19500/-
As per Clause 9.1 Table 3(Moisture Content -IS 2380 (Part 3))	-	1500	Rs- 19500/-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Modulus of rupture (MoR), Min.-IS 2380 (Part 4))	-	1500	Rs- 19500/-
As per Clause 9.1 Table 4, Table 6, Table 7(Modulus of elasticity (MoE), Min. -(IS 2380 (Part 4))	-	1500	Rs- 19500/-
As per Clause 9.1 Table 4, Table 5, Table 6, Table7(Internal bond strength, Min. - IS 2380 (Part 5))	-	1500	Rs- 19500/-
As per Clause 9.1 Table 6, Table 7(24 h thickness swelling (due to general absorption) Max. - IS 2380 (Part 17))	-	1500	Rs- 19500/-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Screw withdrawal strength (face) , Min. -IS 2380 (Part 4))	-	1500	Rs- 19500/-
As per Clause 9.1 Table 4, Table 5, table 6, Table 7(Screw withdrawal strength (edge) , Min. -IS 2380 (Part 4))	-	1500	Rs- 19500/-
As per Clause 9.1 , Table 6, Table 7(Moisture Resistance : Option 1 : Cyclic test (1. )Internal bond strength Min. -IS 2380 (Part 5) see note 1)	-	1000	Rs- 19500/-
As per Clause 9.1 , Table 6, Table 7(Moisture Resistance : Option 2 : Boil test (1.) Internal bond strength , Min.- IS 2380 (Part 5) see note 2)	-	1000	Rs- 19500/-
As per Clause 9.1 , Table 9(Formaldehyde content Fc, mg/100 g for oven dry board -IS 13745)	-	2500	Rs- 19500/-
As per Clause 9.1 , Table 9(Steady-state formaldehyde emission, Fc, mg/m3 (optional test))	-	0	(optional test)
As per Clause 7(Finish --IS 2380 (Part 2), IS 2380 (Part 3) & Visual)	-	0	-
As per Clause 8, Table 2(Length -IS 2380 (Part 2))	-	0	-
As per Clause 8, Table 2(Width - IS 2380 (Part 2))	-	0	-
As per Clause 8, Table 2(Thickness, Sanded/finished panel - IS 2380 (Part 2))	-	0	-
As per Clause 8, Table 2(Squareness, Max. - IS 2380 (Part 2))	-	0	-
As per Clause 8, Table 2(Edge straightness, Max. -IS 2380 (Part 2))	-	0	-
As per Clause 9.1 Table 3(Density -IS 2380 (Part 3))	-	0	-
As per Clause 9.1 Table 3(Variation from mean density, --IS 2380 (Part 3))	-	0	-
As per Clause 9.1 Table 3(Moisture Content -IS 2380 (Part 3))	-	0	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Modulus of rupture (MoR), Min.-IS 2380 (Part 4))	-	0	-
As per Clause 9.1 Table 4, Table 6, Table 7(Modulus of elasticity (MoE), Min. -(IS 2380 (Part 4))	-	0	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table7(Internal bond strength, Min. - IS 2380 (Part 5))	-	0	-
As per Clause 9.1 Table 6, Table 7(24 h thickness swelling (due to general absorption) Max. - IS 2380 (Part 17))	-	0	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Screw withdrawal strength (face) , Min. -IS 2380 (Part 4))	-	0	-
As per Clause 9.1 Table 4, Table 5, table 6, Table 7(Screw withdrawal strength (edge) , Min. -IS 2380 (Part 4))	-	0	-
As per Clause 9.1 , Table 6, Table 7(Moisture Resistance : Option 1 : Cyclic test (1. )Internal bond strength Min. -IS 2380 (Part 5) see note 1)	-	0	-
As per Clause 9.1 , Table 6, Table 7(Moisture Resistance : Option 2 : Boil test (1.) Internal bond strength , Min.- IS 2380 (Part 5) see note 2)	-	0	-
As per Clause 9.1 , Table 9(Formaldehyde content Fc, mg/100 g for oven dry board -IS 13745)	-	0	-
As per Clause 9.1 , Table 9(Steady-state formaldehyde emission, Fc, mg/m3 (optional test))	-	0	-
As per Clause 7(Finish --IS 2380 (Part 2), IS 2380 (Part 3) & Visual)	-	0	-
As per Clause 8, Table 2(Length -IS 2380 (Part 2))	-	0	-
As per Clause 8, Table 2(Width - IS 2380 (Part 2))	-	0	-
As per Clause 8, Table 2(Thickness, Sanded/finished panel - IS 2380 (Part 2))	-	0	-
As per Clause 8, Table 2(Squareness, Max. - IS 2380 (Part 2))	-	0	-
As per Clause 8, Table 2(Edge straightness, Max. -IS 2380 (Part 2))	-	0	-
As per Clause 9.1 Table 3(Density -IS 2380 (Part 3))	-	0	-
As per Clause 9.1 Table 3(Variation from mean density, --IS 2380 (Part 3))	-	0	-
As per Clause 9.1 Table 3(Moisture Content -IS 2380 (Part 3))	-	0	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Modulus of rupture (MoR), Min.-IS 2380 (Part 4))	-	0	-
As per Clause 9.1 Table 4, Table 6, Table 7(Modulus of elasticity (MoE), Min. -(IS 2380 (Part 4))	-	0	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table7(Internal bond strength, Min. - IS 2380 (Part 5))	-	0	-
As per Clause 9.1 Table 6, Table 7(24 h thickness swelling (due to general absorption) Max. - IS 2380 (Part 17))	-	0	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Screw withdrawal strength (face) , Min. -IS 2380 (Part 4))	-	0	-
As per Clause 9.1 Table 4, Table 5, table 6, Table 7(Screw withdrawal strength (edge) , Min. -IS 2380 (Part 4))	-	0	-
As per Clause 9.1 , Table 6, Table 7(Moisture Resistance : Option 1 : Cyclic test (1. )Internal bond strength Min. -IS 2380 (Part 5) see note 1)	-	0	-
As per Clause 9.1 , Table 6, Table 7(Moisture Resistance : Option 2 : Boil test (1.) Internal bond strength , Min.- IS 2380 (Part 5) see note 2)	-	0	-
As per Clause 9.1 , Table 9(Formaldehyde content Fc, mg/100 g for oven dry board -IS 13745)	-	0	-
As per Clause 9.1 , Table 9(Steady-state formaldehyde emission, Fc, mg/m3 (optional test))	-	0	-

-
included w.e.f 14.01.2026

1664

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 18427 (2024)

Three piece round open top metal cans for foods and beverages -- Specification

All

34500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1.1(C)	-	34500	-
Cl-5.1.1(Si)	-	34500	-
Cl-5.1.1(Mn)	-	34500	-
Cl-5.1.1(P)	-	34500	-
Cl-5.1.1(S)	-	34500	-
Cl-5.1.2, Table-1("Tinplate Nominal Thickness- Flattened Body")	-	34500	-
Cl-5.1.2, Table-1(Built-up Can Body- Beaded)	-	34500	-
Cl-5.1.2, Table-1(Built-up Can Body- Un-beaded)	-	34500	-
Cl-5.1.2, Table-1(Tinplate Nominal Thickness- NEO Ends)	-	34500	-
Cl-5.1.2, Table-2(Tinplate Nominal Thickness- Un-beaded Body)	-	34500	-
Cl-5.1.2, Table-2(Tinplate Nominal Thickness- Beaded Body)	-	34500	-
Cl-5.1.2, Table-2(Tinplate Nominal Thickness- NEO End)	-	34500	-
Cl-5.1.2, Table-2(Tinplate Nominal Thickness- Ring)	-	34500	-
Cl-5.1.2, Table-2(Tinplate Nominal Thickness- Lid)	-	34500	-
Cl-5.1.3, Table-3 (i)(Mango pulp – Body and ends)	-	34500	-
Cl-5.1.3, Table-3 (ii)(Pineapple – Body and ends)	-	34500	-
Cl-5.1.3, Table-3 (iii)(All other thermally processed cans – Body and ends)	-	34500	-
Cl-5.1.3, Table-3 (iv)(Non-thermally processed can – Body and ends)	-	34500	-
Cl-5.1.3, Table-3 (v)(Ring and lid)	-	34500	-
Cl-5.1.3, Table-3 (vi)(POE ring)	-	34500	-
Cl-5.1.4(Surface Finish)	-	34500	-
Cl-5.1.5(Tin Grain Size)	-	34500	-
Cl-5.1.6(Iron Solution Value)	-	34500	-
Cl-5.1.7(Surface Oil)	-	34500	-
Cl-5.1.8(Passivation Treatment)	-	34500	-
Cl-5.1.9(Edge Camber and Out-of-Squareness)	-	34500	-
Cl-5.1.10(Mechanical Properties)	-	34500	-
Cl-5.2(Lacquers and Decorative Coatings)	-	34500	-
Cl-5.3(Inks)	-	34500	-
Cl-5.4(Lining Compound/Can End Sealants)	-	34500	-
Cl-5.5(Side Stripe Systems)	-	34500	-
Cl-5.6(Easy Open End)	-	34500	-
Cl-5.7(Aluminium Tagger)	-	34500	-
Cl-5.8(Peel Off Ends (POE))	-	34500	-
Cl-5.9(Surface Lubrications and Rust Prevention Oils)	-	34500	-
Cl-6.1, Table-5(Internal Diameter)	-	34500	-
Cl-6.1, Table-5(Necked-In Side Trade Size)	-	34500	-
Cl-6.1, Table-5(Necked-In Side Nominal Diameter)	-	34500	-
Cl-6.2(Capacities)	-	34500	-
Cl-7(Manufacture)	-	34500	-
Cl-8.1, Table-9 (i)(Thermally processed food cans)	-	34500	-
Cl-8.1, Table-9 (ii)(Nonthermally processed food cans)	-	34500	-
Cl-8.2(Vacuum Test)	-	34500	-
Cl-8.3(Migration Test)	-	34500	-
Cl-8.4(Specific Migration Limit (SML)	-	34500	-
Cl-10.1(Marking)	-	34500	-
7.2.1.2(Stack height specification)	-	34500	-
Cl-7.2.3.3(Testing- Moisture Retention)	-	34500	-

-
Included w.e.f. 24.12.2025

1665

MEKANIKA TESTING LABS LLP

8191236

IS 456 (2000)

Plain and reinforced concrete - Code of practice (Fourth Revision)

Construction water ( Clause no. 5.4) and strength of concrete (Clause no. 16)

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4-Table-1 (v)-IS: 3025(P-17)(Suspended matter)	-	500	-
5.4-Table-1 (iv)-IS: 3025(P-32)(Chloride)	-	500	-
5.4-Table-1 (iii)-IS: 3025(P-32)(Chloride)	-	500	-
5.4-Table-1 (ii)-IS: 3025(P-24)(Sulphate)	-	500	-
5.4-Table-1 (i)-IS: 3025(P-18)(In-Organic)	-	500	-
5.4-Table-1 (i)-IS: 3025(P-18)(Organic )	-	500	-
5.4.2-IS: 3025(P-11)(Ph)	-	500	-
5.4-(b)-IS: 3025 (P-23)(Volume of 0.02 N H2SO4 to neutralized 100 ml of water using mixed indicator)	-	500	-
5.4-(a)-IS: 3025 (P-22)(Volume of 0.02 N NaOH to neutralized 100 ml of water using phenolphthalein indicator)	-	500	-
Cl 5.4 Table 1 (v)(Suspended Matter)	-	500	-
Cl 5.4 Table 1 (iv)(Chloride)	-	500	-
Cl 5.4 Table 1 (iii)(Sulphate)	-	500	-
Cl 5.4 Table 1 (ii)(Inorganic Solids)	-	500	-
Cl 5.4 Table 1 (i)(Organic Solids)	-	500	-
Cl 5.4 .2(pH)	-	500	-
Cl 5.4 (b)(Alkalinity)	-	500	-
Cl 5.4 (a)(Acidity)	-	500	-
16.1(Average Compressive Strength)	-	1000	-
16.1(Compressive Strength of Individual Samples )	-	1000	-
16.1(Compressive Strength of Individual Samples )	-	1000	-
16.1(Compressive Strength of Individual Samples )	-	1000	-
Clause 5.4(Description)	-	100	-
16.2(Flexural Strength)	-	1000	-
cl 5.4.4.3(Initial Setting Time)	-	0	-
cl 5.4.4.3(Initial Setting Time)	-	0	-

21 Nov, 2028

-
Included w.e.f 01.01.2026 For construction water only For compressive strength only

1666

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS/IEC 61683 (1999)

Photovoltaic systems - Power conditioners - Procedure for measuring efficiency

ALL

114000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Efficiency calculations)	-	30000	-
6(Efficiency test circuits)	-	30000	-
7(Loss measurement)	-	30000	-
Annex A(Power conditioner description)	-	2000	-
Annex B(Power efficiency and conversion factor)	-	3500	-
Annex C(Weighted average energy efficiency)	-	2500	-
Annex D(Derivation of efficiency tolerance in Table 2)	-	1500	-
4(Efficiency measurement conditions)	-	30000	-
4.1(DC power source for testing)	-	1000	-
4.2(Temperature)	-	1000	-
4.3(Output voltage and frequency)	-	1000	-
4.4(Input voltage)	-	1000	-
4.5(Ripple and distortion)	-	1000	-
4.6(Resistive loads/utility grid)	-	1000	-
4.7(Reactive loads)	-	1000	-
4.8(Resistive plus non-linear loads)	-	1000	-
4.9(Complex loads)	-	1000	-
5(Efficiency calculations)	-	-	-
6(Efficiency test circuits)	-	-	-
7(Loss measurement)	-	-	-
Annex A(Power conditioner description)	-	-	-
Annex B(Power efficiency and conversion factor)	-	-	-
Annex C(Weighted average energy efficiency)	-	-	-
Annex D(Derivation of efficiency tolerance in Table 2)	-	-	-
4(Efficiency measurement conditions)	-	-	-
4.1(DC power source for testing)	-	-	-
4.2(Temperature)	-	-	-
4.3(Output voltage and frequency)	-	-	-
4.4(Input voltage)	-	-	-
4.5(Ripple and distortion)	-	-	-
4.6(Resistive loads/utility grid)	-	-	-
4.7(Reactive loads)	-	-	-
4.8(Resistive plus non-linear loads)	-	-	-
4.9(Complex loads)	-	-	-

08 Feb, 2027

-
included w.e.f 30.01.2026

1667

Mbis Tescon Private Limited

8190506

IS 14735 (1999)

Unplasticized Polyvinyl Chloride (UPVC) Injection Moulded Fittings for Soil and Waste Discharge System for Inside and Outside Buildings Including Ventilation and Rain Water System -

All Variety

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Type of Fitting)	-	200	11000 for BIS testing charges and for others 1.5 times of BIS testing charges
4(Size Designation)	-	200	-
5(Colour of fittings)	-	200	-
7.1,Table 1(Wall thickness)	-	200	-
7.2 ,Table 2&3(Socket Dimensions)	-	1000	-
7.3(Dimensions of waste trap(Nahani Trap)	-	11000	-
8(Sealing Rings)	-	3000	-
10(Workmanship)	-	200	-
11(Design requirements)	-	200	-
11.1(Solvent cement type or Rubber ring type)	-	200	-
11.2(Socket and spigot configeration)	-	200	-
11.4,Table 5(Vent cowl)	-	11000	-
11.5,Table 6(Pipe Clips)	-	11000	-
12(Physical test requirements)	-	0	-
12.1(Visual appearance)	-	200	-
12.2(Stress relief test)	-	1500	-
12.3(Vicat softening tempewrature)	-	1500	-
Cl.13, IS 12235 (P-7)-2004, (Resistance to Sulphuric Acid)	-	1000	-
Cl.14, Annex A(Titanium Di-Oxide Content)	-	1000	-
Cl.15, Annex B(Sulphated Ash Content)	-	1500	-
16(Mechanical Properties)	-	0	-
16.1(Impact test)	-	1500	-
17(Watet tightness of joint)	-	1000	-
12.4(Effect on water test)	-	5000	-
7.4(Chamfer)	-	200	-
11.3(Access Openings)	-	200	-
Table 4(Dimension of Access Openings)	-	200	-
Cl 12.4(Effect on Water Lead (first extraction))	-	1000	-
Cl 12.4(Effect on Water Lead (third extraction))	-	1000	-
Cl 12.4(Effect on Water Dialkyl tin C4 and higher homologues(measured as tin )(third extraction ))	-	1000	-
Cl 12.4(Effect on Water Cadmium (mean of first extraction, second extraction and third extraction))	-	1000	-
Cl 12.4(Effect on Water Mercury (mean of first extraction, second extraction and third extraction))	-	1000	-
19(Marking)	-	0	-

-
Included w.e.f 24.12.2025

1668

Mbis Tescon Private Limited

8190506

IS 13487 (2024)

Irrigation Equipment — Emitters — Specification

All Variety

5500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-7.2(Flow Paths in Emitter)	-	500	5500 for BIS testing charges and for others 1.5 times of BIS testing Charges
Cl-7.4(Emitter Pull-Out)	-	800	-
Cl-8.1.1(Uniformity of Emission Rate)	-	1000	-
Cl-7.3(Resistance to Hydrostatic Pressure)	-	1000	-
Cl-7.1(Construction and Workmanship)	-	100	-
Cl-8.1.2(Emission Rate as Function of Inlet Pressure)	-	1000	-
Cl-5.1(Connections)	-	100	-
Cl-8.1.3(Determination of Emitter Exponent)	-	1000	-
Cl-5.2(Emitter Ends)	-	0	-
Cl-5.3(Materials)	-	0	-
Cl-6.1(Test Specimens)	-	0	-
Cl-6.2.1(polyethylene pipe)	-	0	-
Cl-6.2.2("grease or chemicals ")	-	0	-
Cl-6.2.3(water temperature)	-	0	-
Cl-6.3(Accuracy or Measuring Devices)	-	0	-
Cl-7.4.1(In-Line Emitters)	-	0	-
Cl-7.4.2(On-Line Emitters)	-	0	-
Cl-9(Marking)	-	0	-

-
Included w.e.f 24.12.2025

1669

National Test House (WR) - NTH, Mumbai

7107604

IS 4270 (2001)

Steel tubes used for water wells specification (Third Revision)

13500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6(Tensile Test & Flattening Test)	-	3000	-
Cl 7(Outer Diameter, Thickness, Mass & Straightness)	-	1000	-
Cl 9(Pipe ends, Angle of bevel & Root Face )	-	1000	-
Cl 10(Outer Diameter & Overall Length)	-	1000	-
Cl 12(Bituminous Coating & Galvanizing )	-	500	-
Cl 14(Workmanship)	-	500	-
Cl 6(Tensile Test & Flattening Test)	-	3000	-
Cl 7(Outer Diameter, Thickness, Mass & Straightness)	-	1000	-
Cl 9(Pipe ends, Angle of bevel & Root Face )	-	500	-
Cl 10(Outer Diameter & Overall Length)	-	1000	-
Cl 12(Bituminous Coating & Galvanizing )	-	500	-
Cl 14(Workmanship)	-	500	-
Cl 6(Tensile Test & Flattening Test)	-	3000	-
Cl 7(Outer Diameter, Thickness, Mass & Straightness)	-	1000	-
Cl 9(Pipe ends, Angle of bevel & Root Face )	-	500	-
Cl 10(Outer Diameter & Overall Length)	-	1000	-
Cl 12(Bituminous Coating & Galvanizing )	-	500	-
Cl 14(Workmanship)	-	1000	-
5.2(phosphorus)	-	500	-
5.2(sulphur)	-	500	-
Cl 14(Workmanship)	-	500	-
Cl 12(Bituminous Coating & Galvanizing )	-	500	-
Cl 10(Outer Diameter & Overall Length)	-	1000	-
Cl 9(Pipe ends, Angle of bevel & Root Face )	-	500	-
Cl 7(Outer Diameter, Thickness, Mass & Straightness)	-	1000	-
Cl 6(Tensile Test & Flattening Test)	-	3000	-
Cl 6(Tensile Test & Flattening Test)	-	3000	-
Cl 7(Outer Diameter, Thickness, Mass & Straightness)	-	1000	-
Cl 9(Pipe ends, Angle of bevel & Root Face)	-	500	-
Cl 10(Outer Diameter & Overall Length)	-	1000	-
Cl 12(Bituminous Coating & Galvanizing)	-	500	-
Cl 14(Workmanship)	-	500	-
11.0(Alignment test IS 4270: 2001)	-	13500	-
Cl. 8(Hydrostatic test)	-	5000	-
Cl 6(Tensile Test & Flattening Test)	-	3000	-
Cl 7(Outer Diameter, Thickness, Mass & Straightness)	-	1000	-
Cl 9(Pipe ends, Angle of bevel & Root Face )	-	1000	-
Cl 10(Outer Diameter & Overall Length)	-	1000	-
Cl 12(Bituminous Coating & Galvanizing )	-	1500	-
Cl 14(Workmanship)	-	1000	-
Cl 6(Tensile Test & Flattening Test)	-	3000	-
Cl 7(Outer Diameter, Thickness, Mass & Straightness)	-	1000	-
Cl 9(Pipe ends, Angle of bevel & Root Face )	-	1000	-
Cl 10(Outer Diameter & Overall Length)	-	1000	-
Cl 12(Bituminous Coating & Galvanizing )	-	1500	-
Cl 14(Workmanship)	-	1000	-
Cl 6(Tensile Test & Flattening Test)	-	3000	-
Cl 7(Outer Diameter, Thickness, Mass & Straightness)	-	1000	-
Cl 9(Pipe ends, Angle of bevel & Root Face )	-	1500	-
Cl 10(Outer Diameter & Overall Length)	-	1500	-
Cl 12(Bituminous Coating & Galvanizing )	-	1500	-
Cl 14(Workmanship)	-	1000	-
Cl 14(Workmanship)	-	1000	-
Cl 12(Bituminous Coating & Galvanizing )	-	1500	-
Cl 10(Outer Diameter & Overall Length)	-	1000	-
Cl 9(Pipe ends, Angle of bevel & Root Face )	-	1000	-
Cl 7(Outer Diameter, Thickness, Mass & Straightness)	-	1000	-
Cl 6(Tensile Test & Flattening Test)	-	3000	-
Cl 6(Tensile Test & Flattening Test)	-	3000	-
Cl 7(Outer Diameter, Thickness, Mass & Straightness)	-	1000	-
Cl 9(Pipe ends, Angle of bevel & Root Face)	-	1000	-
Cl 10(Outer Diameter & Overall Length)	-	1000	-
Cl 12(Bituminous Coating & Galvanizing)	-	1500	-
Cl 14(Workmanship)	-	1000	-
11.0(Alignment test IS 4270: 2001)	-	1000	-
Cl. 8(Hydrostatic test)	-	2500	-

-
included w.e.f 24.03.2026

1670

Aaditech Test and Calibration Lab LLP

8179926

IS 302 : Part 2 : Sec 30 (2007)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 30 room heaters (First Revision)

safety of electric radiators (room heaters) for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances and 415 V for other appliances,

70000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 (Classification)	-	500	-
Cl.6 (Classification)	-	500	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7(Marking and Instructions)	-	0	-
Cl.7(Marking and Instructions)	-	0	-
Cl.7(Marking and Instructions)	-	0	-
Cl.7.3(Marking and Instructions)	-	0	-
Cl.7.3(Marking and Instructions)	-	0	-
Cl.7.3(Marking and Instructions)	-	0	-
Cl.7.4(Marking and Instructions)	-	0	-
Cl.7.5(Marking and Instructions)	-	0	-
Cl.7.6 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.8 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.9 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.10 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.11 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2009(Marking and Instructions)	-	0	-
Cl.7.13 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.14 of IS302-1:2008(Marking and Instructions)	-	500	-
Cl.7.14(Marking and Instructions)	-	500	-
Cl.7.14(Marking and Instructions)	-	500	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	500	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.101(Marking and Instructions)	-	0	-
Cl.8 & IS:302-1:2008(Protection Against Access to Live Parts)	-	1000	-
Cl.10 & IS:302-1:2008(Power Input and Current)	-	2000	-
Cl.11 & IS:302-1:2008(Heating)	-	2000	-
Cl.11 & IS:302-1:2008(Heating)	-	2000	-
Cl.11 & IS:302-1:2008(Heating)	-	1000	-
Cl.11 & IS:302-1:2008(Heating)	-	1000	-
Cl.11 & IS:302-1:2008(Heating)	-	1000	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11.8(Heating)	-	0	-
Cl.11.8(Heating)	-	0	-
Cl.11.8(Heating)	-	0	-
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	2000	-
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	2000	-
Cl.14 & IS:302-1:2008(Transient Over Voltages)	-	3000	-
Cl.15 & IS: 302-1:2008(Moisture Resistance )	-	4000	-
Cl.15.3 of IS 302-1:200(Moisture Resistance )	-	1000	-
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	1500	-
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	1500	-
Cl.17 & IS:302-1:2008(Over load Protection of Transformers and Associated Circuits )	-	1000	-
Cl.18 (Endurance. )	-	0	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	3000	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	1000	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	500	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	500	-
Cl.19.101(Abnormal Operation.)	-	500	-
Cl.19.102(Abnormal Operation.)	-	500	-
Cl.19.103(Abnormal Operation.)	-	500	-
Cl.19.104(Abnormal Operation.)	-	500	-
Cl.19.105(Abnormal Operation.)	-	500	-
Cl.19.106(Abnormal Operation.)	-	500	-
Table 8 of IS 302-1:2008(Abnormal Operation.)	-	0	-
Cl.19.107(Abnormal Operation.)	-	0	-
Cl.19.108(Abnormal Operation.)	-	500	-
Cl.19.109(Abnormal Operation.)	-	500	-
Cl.19.110(Abnormal Operation.)	-	500	-
Cl.19.111(Abnormal Operation.)	-	500	-
Cl.19.112(Abnormal Operation.)	-	500	-
Cl.19.113(Abnormal Operation.)	-	500	-
Cl.19.114(Abnormal Operation.)	-	500	-
Cl.20 & IS:302-1:2008(Stability & Mechanical Hazards)	-	2000	-
Cl.21 & IS:302-1:2008)(Mechanical Strength.)	-	2000	-
Cl.21.2 of IS 302-1:2008(Mechanical Strength.)	-	2000	-
Cl.21.101 (Mechanical Strength.)	-	500	-
Cl.21.102(Mechanical Strength.)	-	500	-
Cl.21.103(Mechanical Strength.)	-	500	-
Cl.22.1 of IS 302-1:2008(Construction)	-	500	-
Cl.22.5 of IS 302-1:2008(Construction)	-	500	-
Cl.22.6 of IS 302-1:2008(Construction)	-	500	-
Cl.22.7 of IS 302-1:2008(Construction)	-	500	-
Cl.22.8 of IS 302-1:2008(Construction)	-	500	-
Cl.22.9 of IS 302-1:2008(Construction)	-	500	-
Cl.22.11(Construction)	-	500	-
Cl.22.12 of IS 302-1:2008(Construction)	-	500	-
Cl.22.13 of IS 302-1:2008(Construction)	-	500	-
Cl.22.14 of IS 302-1:2008(Construction)	-	500	-
Cl.22.15 of IS 302-1:2008(Construction)	-	500	-
Cl.22.18 of IS 302-1:2008(Construction)	-	500	-
Cl.22.20 of IS 302-1:2008(Construction)	-	500	-
Cl.22.21 of IS 302-1:2008(Construction)	-	500	-
Cl.23 & IS:302-1:2008(Internal Wiring )	-	3000	-
Cl.23.4 & Cl.29 of 302-1:2008(Internal Wiring )	-	1000	-
Cl.23.5 of 302-1:2008(Internal Wiring )	-	1000	-
Cl.23.7 of 302-1:2008(Internal Wiring )	-	1000	-
C.23.7 of 302-1:2008(Internal Wiring )	-	1000	-
Cl.24.1 of 302-1:2008(Component)	-	1000	-
Cl.24.1 of 302-1:2008(Component)	-	1000	-
Cl.24.1.3 (Component)	-	1000	-
Cl.24.1.3 (Component)	-	1000	-
Cl.24.1.3 (Component)	-	1000	-
Cl.24.1.3 (Component)	-	1000	-
C.24.1.4(Component)	-	1000	-
C.24.2 of 302-1:2008(Component)	-	1000	-
Cl.24.10(Component)	-	1000	-
Cl.25.1 of 302-1:2008(Supply Connection and External Flexible Cords )	-	1000	-
Cl. 25.2 of IS 3021:2008(Supply Connection and External Flexible Cords )	-	1000	-
Cl. 25.3 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	1000	-
Cl.25.5 of 302-1:2008(Supply Connection and External Flexible Cords )	-	1000	-
Cl.25.6 of 302-1:2008(Supply Connection and External Flexible Cords )	-	1000	-
Cl.25.7.(Supply Connection and External Flexible Cords )	-	1000	-
Cl.25.8(Supply Connection and External Flexible Cords )	-	1000	-
Cl. 25.9(Supply Connection and External Flexible Cords )	-	1000	-
Cl.25.10 of 302-1:2008(Supply Connection and External Flexible Cords )	-	1000	-
Cl. 25.11(Supply Connection and External Flexible Cords )	-	500	-
Cl. 25.12(Supply Connection and External Flexible Cords )	-	500	-
Cl. 25.13(Supply Connection and External Flexible Cords )	-	500	-
Cl.25.14 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	2000	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	1000	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	1000	-
Cl.25.17 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	500	-
Cl.25.18(Supply Connection and External Flexible Cords )	-	500	-
Cl.25.20(Supply Connection and External Flexible Cords )	-	1000	-
Cl.26.1 of IS 302-1:2008(Terminal for External Conductors )	-	1000	-
Cl.26.10 of IS 302-1:2008(Terminal for External Conductors )	-	1000	-
Cl.26.11 of IS 302-1:2008(Terminal for External Conductors )	-	1000	-
Cl.27.1 of 302-1:2008(Provision for Earthing.)	-	500	-
Cl.27.5 of 302-1:2008(Provision for Earthing.)	-	4500	-
Cl.28 of 302-1:2008(Screws and Connections.)	-	5000	-
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	3000	-
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	3000	-
Cl.30 & IS:302-1:2008(Resistance to Heat and Fire)	-	3000	-
Cl.30.2.2 of 302-1:2008(Resistance to Heat and Fire)	-	3000	-
Cl.31 & IS:302-1:2008(Resistance to Rusting.)	-	5000	-
Cl.32 & IS:302-1:2008(Radition,Toxicity and similar Hazards.)	-	0	-
Cl.31 of IS:302-1:2008(Resistance to Rusting.)	-	0	-
Cl.30.2 of 302-1:2008(Resistance to Heat and Fire : Resistance to fire)	-	0	-
Cl.30.1 of IS:302-1:2008(Resistance to Heat and Fire: Resistance to heat. )	-	2000	-
Cl.29.2 of IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation : Creepage Distance)	-	1000	-
Cl.29.1 of IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation : Clearance )	-	500	-
Cl.28 of 302-1:2008(Screws and Connections.)	-	500	-
Cl.27.5 of 302-1:2008(Provision for Earthing : ECR)	-	1000	-
Cl.27.1 of 302-1:2008(Provision for Earthing )	-	1000	-
Cl.26 of IS 302-1:2008(Terminal for External Conductors )	-	500	-
Cl.25.20 of 302-1:2008(Supply Connection and External Flexible Cords : Additional insulation )	-	500	-
Cl.25.18 of 302-1:2008(Supply Connection and External Flexible Cords : Arrangement of cord anchorages )	-	500	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords : Cord grip test - displacement)	-	500	-
Cl. 25.13 of 302-1:2008(Supply Connection and External Flexible Cords : Inlet opening of supply cords )	-	500	-
Cl. 25.12 of 302-1:2008(Supply Connection and External Flexible Cords : Moulding of cords )	-	500	-
Cl.25.10 of 302-1:2008(Supply Connection and External Flexible Cords : Colour of earthing wire )	-	500	-
Cl. 25.9 of 302-1:2008(Supply Connection and External Flexible Cords : Contact with sharp edge )	-	500	-
Cl.25.8 of 302-1:2008(Supply Connection and External Flexible Cords : Resistance of supply wires )	-	500	-
Cl.25.7 of IS:302-2-30:2007(Supply Connection and External Flexible Cords : Supply cords material )	-	500	-
Cl.25.5 of 302-1:2008(Supply Connection and External Flexible Cords : Type of attachments )	-	500	-
Cl.25.1 of 302-1:2008(Supply Connection and External Flexible Cords : Means of connection )	-	500	-
Cl.24 of IS:302-2-30:2007(Component)	-	500	-
Cl.23.7 of 302-1:2008(Internal Wiring : Colour of earting conductor )	-	500	-
Cl.23 of IS:302-1:2008(Internal Wiring )	-	1000	-
Cl.22.106 of IS:302-2-30:2007(Construction : Checking of thermostats, timers or similar means for visibl glowing radiant heaters)	-	500	-
Cl.22.106 of IS:302-2-30:2007(Construction : Checking of openings on the underside)	-	500	-
Cl.22.102 & Cl 22.103 of IS:302-2-30:2007(Construction : Fireguard )	-	500	-
Cl.22.101 of IS:302-2-30:2007(Construction : Prevention to contact with heating element)	-	500	-
Cl.22.24 of IS:302-2-30:2007(Construction : test of bare heating element)	-	500	-
Cl.22.18 of IS 302-1:2008(Construction : Resistance to corrosion )	-	500	-
Cl.22.15 of IS 302-1:2008(Construction : Storage hooks for flexible cords)	-	500	-
Cl.22.14 of IS 302-1:2008(Construction : ragged and sharp edges)	-	500	-
Cl.22.13 of IS 302-1:2008(Construction : Position of handles )	-	500	-
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knobs,grips,lever and similer parts )	-	500	-
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable parts )	-	500	-
Cl.22.7 of IS:302-2-30:2007(Construction : Pressure test of oil heater )	-	500	-
Cl.21.101 of IS:302-2-30:2007(Mechanical Strength : fire gaurd deformation test )	-	500	-
Cl.21.2 of IS 302-1:2008(Mechanical Strength : Pentration by sharp implementation )	-	1000	-
Cl.21.1 of IS:302-1:2008)(Mechanical Strength : Rough handling )	-	1000	-
Cl.20 of IS:302-2-30:2007(Stability of Mechanical Hazards)	-	1000	-
Cl.19.114 of IS:302-2-30:2007(Abnormal Operation : the temp. of the surface of the container for oil heaters )	-	500	-
Cl.19.112 of IS:302-2-30:2007(Abnormal Operation : Ignition of bleached cotton gauge)	-	500	-
Cl.19.111 of IS:302-2-30:2007(Abnormal Operation : Ignition of flannelette for Visibly glowing heaters)	-	1000	-
Cl.19.110 of IS:302-2-30:2007(Abnormal Operation : operation against wall for visibly glowing radiant heaters )	-	500	-
Cl.19.109 of IS:302-2-30:2007(Abnormal Operation : operation against wall for fan heater )	-	500	-
Cl.19.106 of IS:302-2-30:2007(Abnormal Operation : Locked rotor of fan hetear )	-	500	-
Cl.19.103 , Cl 19.104 of IS:302-2-30:2007(Abnormal Operation : Operation after Covering by cotton)	-	500	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : High Voltage )	-	500	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : temp rise of supply cord )	-	1000	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : Temp rise of test corner )	-	500	-
Cl.19 of IS:302-1:2008(Abnormal Operation : Emission of molten or poisonous or ignitable gas)	-	500	-
Cl.16 of IS:302-1:2008(Leakage current and Electric strength (After humidity): Electric Strentgh )	-	500	-
Cl.16 of IS:302-1:2008(Leakage current and Electric strength (After humidity): Leakage current )	-	500	-
Cl.15 of IS 302-1:2008(Moisture Resistance )	-	500	-
Cl.14 of IS:302-1:2008(Transient Over Voltages)	-	1000	-
Cl.13 of IS:302-1:2008(Leakage Current of Electric Strength at operating temp. )	-	500	-
Cl.13 of IS:302-1:2008(Leakage Current of Electric Strength at operating temp. )	-	500	-
Cl.11 of IS:302-2:30: 2007(Heating : Room temperature)	-	500	-
Cl.11.8 of IS:302-2:30: 2007(Heating : For liquid filled radiators the temp. rise of the outer surface of the liquid container)	-	500	-
Cl.11 of IS:302-2:30: 2007(Heating : Temperature rise in winding)	-	500	-
Cl.11 of IS:302-2:30: 2007(Heating : Air-outlet grills)	-	1000	-
Cl.11 of IS:302-2:30: 2007(Heating : Surfaces of handles, knobs, grips and similar parts)	-	500	-
Cl.11 of IS:302-2:30: 2007(Heating : Wooden supports, walls, ceiling and floor of the test corner)	-	500	-
Cl.11 of IS:302-2:30: 2007(Heating : PVC Insulation )	-	500	-
Cl.10 of IS:302-1:2008(Power Input and Current)	-	500	-
Cl.8 of IS:302-1:2008(Protection Against Access to Live Parts)	-	500	-
Cl.7.101 of IS:302-2:30: 2007(Marking and Instructions : standard mark. )	-	500	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions : Visibility of marking concerning covering)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions : discernibility from the out side )	-	0	-
Cl.7.14 of IS:302-2:30: 2007(Marking and Instructions : Height of “Do not cover”)	-	0	-
Cl.7.14 of IS:302-2:30: 2007(Marking and Instructions : height of symbol)	-	500	-
Cl.7.14 of IS302-1:2008(Marking and Instructions : Legibility and durability )	-	500	-
Cl.7.13 of IS 302-1:2008(Marking and Instructions : Languge of instruction and texts )	-	0	-
Cl.7.11 of IS :302-1:2008(Marking and Instructions : Controls )	-	0	-
Cl.7.9 of IS :302-1:2008(Marking and Instructions : switches )	-	0	-
Cl.7.8 of IS :302-1:2008(Marking and Instructions : terminals )	-	0	-
Cl.7.6 of IS:302-1:2008(Marking and Instructions : Symbols )	-	0	-
Cl.7.5 of IS:302-1:2008(Marking and Instructions : upper of lower limit of the rated power input )	-	0	-
Cl 7.1 & Cl.7.6 of IS:302-2:30: 2007(Marking and Instructions : Do not cover )	-	0	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Country of manufacture )	-	0	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Symbol for Class-II )	-	0	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Model or type )	-	0	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Name , trade-mark or identification mark of the manufacturer )	-	0	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : rated power input )	-	0	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Nature of supply )	-	0	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Rated Voltage )	-	0	-
Cl. 25.4 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	500	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords : Cord grip test - strain at terminals )	-	0	-
Cl.6 (Classification)	-	0	-
Cl.6 (Classification)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7(Marking and Instructions)	-	0	-
Cl.7(Marking and Instructions)	-	0	-
Cl.7(Marking and Instructions)	-	0	-
Cl.7.3(Marking and Instructions)	-	0	-
Cl.7.3(Marking and Instructions)	-	0	-
Cl.7.3(Marking and Instructions)	-	0	-
Cl.7.4(Marking and Instructions)	-	0	-
Cl.7.5(Marking and Instructions)	-	0	-
Cl.7.6 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.8 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.9 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.10 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.11 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2009(Marking and Instructions)	-	0	-
Cl.7.13 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.14 of IS302-1:2008(Marking and Instructions)	-	0	-
Cl.7.14(Marking and Instructions)	-	0	-
Cl.7.14(Marking and Instructions)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.101(Marking and Instructions)	-	0	-
Cl.8 & IS:302-1:2008(Protection Against Access to Live Parts)	-	0	-
Cl.10 & IS:302-1:2008(Power Input and Current)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11.8(Heating)	-	0	-
Cl.11.8(Heating)	-	0	-
Cl.11.8(Heating)	-	0	-
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	0	-
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	0	-
Cl.14 & IS:302-1:2008(Transient Over Voltages)	-	0	-
Cl.15 & IS: 302-1:2008(Moisture Resistance )	-	0	-
Cl.15.3 of IS 302-1:200(Moisture Resistance )	-	0	-
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	0	-
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	0	-
Cl.17 & IS:302-1:2008(Over load Protection of Transformers and Associated Circuits )	-	0	-
Cl.18 (Endurance. )	-	0	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	0	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	0	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	0	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	0	-
Cl.19.101(Abnormal Operation.)	-	0	-
Cl.19.102(Abnormal Operation.)	-	0	-
Cl.19.103(Abnormal Operation.)	-	0	-
Cl.19.104(Abnormal Operation.)	-	0	-
Cl.19.105(Abnormal Operation.)	-	0	-
Cl.19.106(Abnormal Operation.)	-	0	-
Table 8 of IS 302-1:2008(Abnormal Operation.)	-	0	-
Cl.19.107(Abnormal Operation.)	-	0	-
Cl.19.108(Abnormal Operation.)	-	0	-
Cl.19.109(Abnormal Operation.)	-	0	-
Cl.19.110(Abnormal Operation.)	-	0	-
Cl.19.111(Abnormal Operation.)	-	0	-
Cl.19.112(Abnormal Operation.)	-	0	-
Cl.19.113(Abnormal Operation.)	-	0	-
Cl.19.114(Abnormal Operation.)	-	0	-
Cl.20 & IS:302-1:2008(Stability & Mechanical Hazards)	-	0	-
Cl.21 & IS:302-1:2008)(Mechanical Strength.)	-	0	-
Cl.21.2 of IS 302-1:2008(Mechanical Strength.)	-	0	-
Cl.21.101 (Mechanical Strength.)	-	0	-
Cl.21.102(Mechanical Strength.)	-	0	-
Cl.21.103(Mechanical Strength.)	-	0	-
Cl.22.1 of IS 302-1:2008(Construction)	-	0	-
Cl.22.5 of IS 302-1:2008(Construction)	-	0	-
Cl.22.6 of IS 302-1:2008(Construction)	-	0	-
Cl.22.7 of IS 302-1:2008(Construction)	-	0	-
Cl.22.8 of IS 302-1:2008(Construction)	-	0	-
Cl.22.9 of IS 302-1:2008(Construction)	-	0	-
Cl.22.11(Construction)	-	0	-
Cl.22.12 of IS 302-1:2008(Construction)	-	0	-
Cl.22.13 of IS 302-1:2008(Construction)	-	0	-
Cl.22.14 of IS 302-1:2008(Construction)	-	0	-
Cl.22.15 of IS 302-1:2008(Construction)	-	0	-
Cl.22.18 of IS 302-1:2008(Construction)	-	0	-
Cl.22.20 of IS 302-1:2008(Construction)	-	0	-
Cl.22.21 of IS 302-1:2008(Construction)	-	0	-
Cl.23 & IS:302-1:2008(Internal Wiring )	-	0	-
Cl.23.4 & Cl.29 of 302-1:2008(Internal Wiring )	-	0	-
Cl.23.5 of 302-1:2008(Internal Wiring )	-	0	-
Cl.23.7 of 302-1:2008(Internal Wiring )	-	0	-
C.23.7 of 302-1:2008(Internal Wiring )	-	0	-
Cl.24.1 of 302-1:2008(Component)	-	0	-
Cl.24.1 of 302-1:2008(Component)	-	0	-
Cl.24.1.3 (Component)	-	0	-
Cl.24.1.3 (Component)	-	0	-
Cl.24.1.3 (Component)	-	0	-
Cl.24.1.3 (Component)	-	0	-
C.24.1.4(Component)	-	0	-
C.24.2 of 302-1:2008(Component)	-	0	-
Cl.24.10(Component)	-	0	-
Cl.25.1 of 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.2 of IS 3021:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.3 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.5 of 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.6 of 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.7.(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.8(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.9(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.10 of 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.11(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.12(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.13(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.14 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.17 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.18(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.20(Supply Connection and External Flexible Cords )	-	0	-
Cl.26.1 of IS 302-1:2008(Terminal for External Conductors )	-	0	-
Cl.26.10 of IS 302-1:2008(Terminal for External Conductors )	-	0	-
Cl.26.11 of IS 302-1:2008(Terminal for External Conductors )	-	0	-
Cl.27.1 of 302-1:2008(Provision for Earthing.)	-	0	-
Cl.27.5 of 302-1:2008(Provision for Earthing.)	-	0	-
Cl.28 of 302-1:2008(Screws and Connections.)	-	0	-
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	0	-
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	0	-
Cl.30 & IS:302-1:2008(Resistance to Heat and Fire)	-	0	-
Cl.30.2.2 of 302-1:2008(Resistance to Heat and Fire)	-	0	-
Cl.31 & IS:302-1:2008(Resistance to Rusting.)	-	0	-
Cl.32 & IS:302-1:2008(Radition,Toxicity and similar Hazards.)	-	0	-
Cl. 25.4 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-

-
Included w.e.f 30.01.2026 "19.11.4.1 (Electrostatic discharges) 19.11.4.2 (Radiated fields) 19.11.4.3 (Fast transient bursts) 19.11.4.4 (Surge immunity test) 19.11.4.5 (Injected currents) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.7 (Harmonics)"

1671

ACE TEST HOUSE PRIVATE LIMITED (8161906), NEW DELHI

8161906

IS 1489 : Part 2 (2015)

Portland - Pozzolana cement - Specification: Part 2 calcined clay based

PPC

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 -Table 2- i(Fineness 4031 Part 2)	-	750	-
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	250	-
7 -Table 2- ii- a(Expansion after aeration - 4031 Part 3)	-	250	-
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	500	-
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	750	-
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	500	-
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1000	-
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	1140	-
11(Marking)	-	0	-
4(RAW MATERIAL)	-	0	-
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	500	-
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	500	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	500	-
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	500	-
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	500	-
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	500	-
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	0	-
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	0	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	0	-
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	0	-
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	0	-
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	0	-
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	500	-
7 -Table 2- ii- b(Expansion after aeration- 4031 Part 3)	-	0	-
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	500	-
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	0	-
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	0	-
7 -Table 2- i(Fineness 4031 Part 2)	-	0	-
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	0	-
7 -Table 2- ii- a(Expansion after aeration - 4031 Part 3)	-	0	-
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	0	-
7 -Table 2- ii- b(Expansion after aeration- 4031 Part 3)	-	0	-
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	0	-
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	0	-
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	0	-
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	0	-
7 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	0	-
Clause 7 Table 2 SI No. (v) (Compressive strength of Transverse Specimen, 672 ± 4 h)	-	0	-
Clause 7 Table 2 SI No. (v) (Compressive strength of Transverse Specimen, 168 ± 2 h)	-	0	-
Clause 7 Table 2 SI No. (v) (Compressive strength of Transverse Specimen, 72 ± 1 h)	-	0	-
Clause 7 Table 2 SI No. (v) (Transverse Strength, 672 ± 4 h)	-	0	-
Clause 7Table 2 SI No. (v)(Transverse Strength, 168 ± 2 h)	-	0	-
Clause 7Table 2 SI No. (v)(Transverse Strength, 72 ± 1 h)	-	0	-
11(Marking)	-	0	-

26 Aug, 2027

-
Included w.e.f 30.01.2026 "7 -Table 2- v (Transverse Strength - IS 4031 Part 8 (Optional)) Clause 7 Table 2 SI No. (v) (Compressive strength of Transverse Specimen, 672 ± 4 h) Clause 7 Table 2 SI No. (v) (Compressive strength of Transverse Specimen, 168 ± 2 h) Clause 7 Table 2 SI No. (v) (Compressive strength of Transverse Specimen, 72 ± 1 h) Clause 7 Table 2 SI No. (v) (Transverse Strength, 672 ± 4 h) Clause 7Table 2 SI No. (v) (Transverse Strength, 168 ± 2 h) Clause 7Table 2 SI No. (v) (Transverse Strength, 72 ± 1 h)"

1672

Akshat Test Lab & Calibration Services, Ghaziabad

8186526

IS 368 (2014)

Electric immersion water heaters - Specification (Fifth Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 of IS 302-‐2-‐201:2008(Classification)	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	300	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.8 of IS 302‐2-201: 2008(Protection Against Access to Live Parts)	-	500	-
Cl.10 of IS 302‐2‐201:2008(Power Input and Current )	-	500	-
Cl.11 of IS 302-2201: 2008(Heating)	-	700	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl. 12 of IS 368:2014(Operation under overload conditions of appliances with heating elements)	-	500	-
Cl.13 of IS 302-2-201: 2008(Leakage Current & Electric Strength at Operating Temperature)	-	500	-
Cl.13 of IS 302-2-201: 2009(Leakage Current & Electric Strength at Operating Temperature)	-	0	-
Cl.14 of IS 302‐2-201:2008(Transient Over Voltages )	-	100	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	500	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	0	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	700	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	0	-
Cl.17 of IS 302‐2-201: 2008(Overload Protection of Transformers & Associated Circuits)	-	0	-
Cl.18 of IS 368:2014(Endurance)	-	700	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	500	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	0	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	0	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	0	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	0	-
Cl.20 of IS 302-2-201: 2008(Stability & Mechanical Hazards)	-	200	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	200	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	0	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	0	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	500	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	0	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	0	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	500	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	500	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.26 of IS 302-2-201: 2008(Terminals for External Conductors)	-	200	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	500	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	-
Cl.28 of IS 302-2-201: 2008(Screws & Connections )	-	200	-
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	500	-
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	0	-
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	500	-
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	0	-
Cl.31 of IS 302-2-201:2008(Resistance of Rusting )	-	100	-
Cl.32 of IS 302-2-201:2008(Radiation, Toxicity and Similar Hazards)	-	0	-
4(GENERAL REQUIREMENT)	-	0	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	0	For BIS type test - 10000 only. For others type test - 15000 only.

-
"1 19.11.4.1 (Electrostatic discharges) Electrostatics discharges Test facility not available 2 19.11.4.2 (Radiated fields) Radiated fields 27±5°C Ambient Temperature 60±5% RH 3 19.11.4.3 (Fast transient bursts) Fast transient bursts 27±5°C Ambient Temperature 60±5% RH 4 19.11.4.4 (Surge immunity test) Surge immunity test 27±5°C Ambient Temperature 60±5% RH 5 19.11.4.5 (Immunity to conducted discharges) Immunity to conducted dischagres 27±5°C Ambient Temperature 60±5% RH 6 19.11.4.6 (Class 3 Voltage dips and interruptions) Class 3 Voltage dips and interruptions 27±5°C Ambient Temperature 60±5% RH 7 19.11.4.7 (Harmonics) Harmonics 27±5°C Ambient Temperature 60±5% RH"

1673

National Test House (WR) - NTH, Mumbai

7107604

IS 1269 : Part 2 (1997)

Legal metrology - Material measures of length: Part 2 steel tape measures

up to 50M

4500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Nominal Length)	-	1000	-
4(Materials)	-	3500	-
4(Materials)	-	3500	-
4(Materials)	-	3500	-
5(Construction)	-	1000	-
5(Construction)	-	1000	-
5(Construction)	-	1000	-
5(Construction)	-	1000	-
5(Construction)	-	1000	-
5(Construction)	-	1000	-
5(Construction)	-	1000	-
5(Construction)	-	1000	-
5(Construction)	-	1000	-
6.1(Graduation)	-	500	-
6.2(Graduation)	-	500	-
6.2(Graduation)	-	500	-
6.2(Graduation)	-	500	-
6.2(Graduation)	-	500	-
6.3(Graduation)	-	500	-
6.3.1(Graduation)	-	500	-
6.3.2(Graduation)	-	500	-
6.4(Graduation)	-	500	-
6.5(Graduation)	-	500	-
6.6(Graduation)	-	500	-
6.7(Graduation)	-	500	-
6.7(Graduation)	-	500	-
6.7(Graduation)	-	500	-
6.8(Graduation)	-	500	-
6.9(Graduation)	-	500	-
6.1O(Graduation)	-	500	-
6.1O(Graduation)	-	500	-
6.1O(Graduation)	-	500	-
6.1O(Graduation)	-	500	-
6.1O(Graduation)	-	500	-
7.1.1(Numbering-General Requirements)	-	500	-
7.1.2(Numbering-General Requirements)	-	500	-
7.1.3(Numbering-General Requirements)	-	500	-
7.2(Numbering)	-	500	-
7.2(Numbering)	-	500	-
7.3(Numbering)	-	500	-
7.4(Numbering)	-	500	-
7.5(Numbering)	-	500	-
7.6(Numbering)	-	500	-
7.6(Numbering)	-	500	-
7.6(Numbering)	-	500	-
7.7(Numbering)	-	500	-
8(Accuracy Classes & Maximum permissible error)	-	4500	-
8(Accuracy Classes & Maximum permissible error)	-	4500	-
8(Accuracy Classes & Maximum permissible error)	-	4500	-
8(Accuracy Classes & Maximum permissible error)	-	4500	-
8(Accuracy Classes & Maximum permissible error)	-	4500	-
9.1.1(Automtic Winding Device- Winding Device)	-	0	-
9.1.1(Automtic Winding Device- Winding Device)	-	0	-
9.1.1(Automtic Winding Device- Winding Device)	-	0	-
9.1.2(Automtic Winding Device- Case)	-	0	-
9.1.2(Automtic Winding Device- Case)	-	0	-
9.1.2(Automtic Winding Device- Case)	-	0	-
9.2.1(Hand Winding Device- Handle)	-	0	-
9.2.2(Hand Winding Device- Reel)	-	0	-
9.2.3(Hand Winding Device- Case)	-	0	-
9.3(Winding Device)	-	0	-
9.3.1(Winding Device)	-	0	-
3(Nominal Length)	-	4500	-
4(Materials)	-	3500	-
4(Materials)	-	3500	-
4(Materials)	-	3500	-
5(Construction)	-	1200	-
5(Construction)	-	1200	-
5(Construction)	-	1200	-
5(Construction)	-	1200	-
5(Construction)	-	1200	-
5(Construction)	-	1200	-
5(Construction)	-	1200	-
5(Construction)	-	0	-
5(Construction)	-	0	-
6.1(Graduation)	-	0	-
6.2(Graduation)	-	0	-
6.2(Graduation)	-	0	-
6.2(Graduation)	-	0	-
6.2(Graduation)	-	0	-
6.3(Graduation)	-	0	-
6.3.1(Graduation)	-	0	-
6.3.2(Graduation)	-	0	-
6.4(Graduation)	-	0	-
6.5(Graduation)	-	0	-
6.6(Graduation)	-	0	-
6.7(Graduation)	-	0	-
6.7(Graduation)	-	0	-
6.7(Graduation)	-	0	-
6.8(Graduation)	-	0	-
6.9(Graduation)	-	0	-
6.1O(Graduation)	-	0	-
6.1O(Graduation)	-	0	-
6.1O(Graduation)	-	0	-
6.1O(Graduation)	-	0	-
6.1O(Graduation)	-	0	-
7.1.1(Numbering-General Requirements)	-	0	-
7.1.2(Numbering-General Requirements)	-	0	-
7.1.3(Numbering-General Requirements)	-	0	-
7.2(Numbering)	-	0	-
7.2(Numbering)	-	0	-
7.3(Numbering)	-	0	-
7.4(Numbering)	-	0	-
7.5(Numbering)	-	0	-
7.6(Numbering)	-	0	-
7.6(Numbering)	-	0	-
7.6(Numbering)	-	0	-
7.7(Numbering)	-	1200	-
8(Accuracy Classes & Maximum permissible error)	-	1200	-
8(Accuracy Classes & Maximum permissible error)	-	1200	-
8(Accuracy Classes & Maximum permissible error)	-	1200	-
8(Accuracy Classes & Maximum permissible error)	-	1200	-
8(Accuracy Classes & Maximum permissible error)	-	1200	-
9.1.1(Automtic Winding Device- Winding Device)	-	0	-
9.1.1(Automtic Winding Device- Winding Device)	-	0	-
9.1.1(Automtic Winding Device- Winding Device)	-	0	-
9.1.2(Automtic Winding Device- Case)	-	0	-
9.1.2(Automtic Winding Device- Case)	-	0	-
9.1.2(Automtic Winding Device- Case)	-	0	-
9.2.1(Hand Winding Device- Handle)	-	0	-
9.2.2(Hand Winding Device- Reel)	-	0	-
9.2.3(Hand Winding Device- Case)	-	0	-
9.2.3(Hand Winding Device- Case)	-	0	-
9.3(Winding Device)	-	0	-
9.3.1(Winding Device)	-	0	-

-
Included w.e.f 31.12.2025

1674

DARSHAN ELECTRICAL TESTING AND RESEARCH LABORATORY (DETRL), RAJKOT

7165436

IS 12615 (2018)

Line operated three phase AC motors (IE Code) "Efficiency classes and performance specification" (Third Revision)

0.12-22 kW

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.0(Terminal Marking)	-	100	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
Cl. 18.1(Marking and labelling)	-	100	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
Cl. 18.2(Marking and labelling)	-	100	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
16.1.2(Measurement of Resistance of Windings of Stator)	-	200	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
16.1.3(No Load Test)	-	200	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
16.1.5(5 Reduced Voltage Running up Test at no-load (for squirrel cage motor up to 37 kW only))	-	200	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
16.1.4(Locked Rotor Readings of Voltage, Current and Power Input at a Suitable Reduced Voltage)	-	150	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
16.2.4(Temperature Rise Test)	-	1500	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
16.2.2(Locked Rotor Test)	-	150	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
16.1.6(High Voltage Test)	-	200	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
16.1.1(Insulation Resistance Test)	-	200	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
16.2.3(Full Load Test to Determine Efficiency, Power Factor and Slip)	-	5500	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
16.2.5(Momentary Overload Test)	-	300	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
12.2(Pull up torque)	-	300	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
8.0(Earthing)	-	50	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
16.2.1(Dimensions)	-	250	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
16.3.1( Test for Vibration Severity of Motor)	-	250	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
16.3.2( Test for Noise Levels of Motor)	-	200	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
16.3.3( Test for Degree of Protection by Enclosure)	-	1000	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
16.3.4(Over Speed Test)	-	500	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
16.3.5( Temperature Rise Test at Limiting Values of Voltage and Frequency Variation)	-	1500	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
6(Method of cooling)	-	50	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
15.2(Rating)	-	50	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
18.3(BIS Certification Marking )	-	50	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
15.3.2(Marking)	-	50	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
11.0(DUTY AND RATING)	-	50	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
18.3(Marking)	-	50	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
16.2.2.1(Locked Rotor Test)	-	150	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
16.2.2.2(Locked Rotor Test)	-	150	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
16.2.2.2.1(Locked Rotor Test)	-	150	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
16.2.2.3(Determination of starting characteristics -locked rotor current)	-	150	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
16.2.2.3.1(Direct proportion method)	-	150	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
15.2(Rating)	-	50	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
18.3(BIS Certification Marking )	-	50	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
15.3.2(Marking)	-	50	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
8.0(Earthing)	-	50	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
9.0(Terminal Marking)	-	100	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
11.0(DUTY AND RATING)	-	50	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
18.3(Marking)	-	50	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
16.2.1(Dimensions)	-	250	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
16.1.1(Insulation Resistance Test)	-	200	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
16.1.2(Measurement of Resistance of Windings of Stator)	-	200	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
16.1.3(No Load Test)	-	200	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
16.1.4(Locked Rotor Readings of Voltage, Current and Power Input at a Suitable Reduced Voltage)	-	150	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
16.1.5(5 Reduced Voltage Running up Test at no-load (for squirrel cage motor up to 37 kW only))	-	200	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
16.1.6(High Voltage Test)	-	200	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
16.2.2(Locked Rotor Test)	-	150	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
16.2.2.1(Locked Rotor Test)	-	150	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
16.2.2.2(Locked Rotor Test)	-	150	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
16.2.2.2.1(Locked Rotor Test)	-	150	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
16.2.2.3(Determination of starting characteristics -locked rotor current)	-	150	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
16.2.2.3.1(Direct proportion method)	-	150	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
16.2.3(Full Load Test to Determine Efficiency, Power Factor and Slip)	-	5500	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
16.2.4(Temperature Rise Test)	-	1500	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
16.2.5(Momentary Overload Test)	-	300	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
16.3.1( Test for Vibration Severity of Motor)	-	250	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
16.3.2( Test for Noise Levels of Motor)	-	200	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
16.3.3( Test for Degree of Protection by Enclosure)	-	1000	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
16.3.4(Over Speed Test)	-	500	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
16.3.5( Temperature Rise Test at Limiting Values of Voltage and Frequency Variation)	-	1500	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
Cl. 16.3.5(Temperature rise test at limiting values of voltage and frequnancy variation)	-	1500	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
Cl. 16.3.4(Over Speed test)	-	500	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
Cl. 16.3.3(Test for degree of protection by enclosure)	-	1000	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
Cl. 16.3.2(Noise)	-	200	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
Cl. 16.3.1(Vibration test)	-	250	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
Cl. 11(Duty and Rating)	-	50	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
Cl. 16.2.1(Dimensions)	-	250	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
Cl. 16.1.6(High Voltage Test)	-	200	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
Cl. 16.1.1(Insulation Resistance test)	-	200	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
Cl. 16.2.5(Momentary overload test)	-	300	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
Cl. 8(Earthing)	-	50	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
Cl. 6(Method of cooling)	-	50	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
Cl. 9(Terminal marking)	-	100	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
Cl. 16.2.4(Temperature rise test )	-	1500	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
Cl. 16.2.3(Full load test)	-	5500	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
Cl. 12.2(Pull up test)	-	300	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
Cl. 16.1.4 & 16.2.2(Locked rotor readings)	-	150	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
Cl. 16.1.5(Reduced voltage running test)	-	200	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
Cl. 16.1.3(No load at rated voltage)	-	200	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
Cl. 16.1.2(Measurment of stator resistance)	-	200	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
Cl. 18.3(BIS Certification Marking)	-	50	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
Cl. 15.2(rating)	-	50	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
Cl-12.1(Momentary Excess Torque)	-	300	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
Cl-12.2(Pull-up-Torque)	-	300	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
Cl-12.3(Sustained Overloads)	-	300	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
Cl-13(Temperature Rise)	-	1500	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
Cl-14(Performance Values)	-	5500	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.
Cl-15(Efficiency)	-	5500	Rs.10,000/-Up to 1kW,Rs.12,000/- Above 1.1 kW to 3.7 kW,Rs.15,000/- Above 3.7 kW to 10.5 kW, Rs. 18,000/-Above 10.5 to 15 kW, Rs.25,000/-Above 15 kW to 22 kW.

-
-

1675

DELHI TEST HOUSE (50) KUNDLI SONIPAT

9127026

IS 16542 (2016)

Direct insertion type storage water tank for all glass evacuated tubes solar collector - Specification

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.3(Ideal Heating Test)	-	2000	-
8.2(Leakage Test)	-	500	-
8.4(Integral Test)	-	2000	-
8.5(Performance Test)	-	1000	-
7.6(Thermal Shock Test for Inner Sealing)	-	1500	-
8.1(Measurement of Storage Water Tank Capacity)	-	1000	-
6(GENERAL REQUIREMENTS)	-	500	-
7.7(Thermal Shock Test for outer Sealing)	-	1500	-

23 Jun, 2028

-
-

1676

DELHI TEST HOUSE (50) KUNDLI SONIPAT

9127026

IS 12933 : Part 1 (2003)

Solar flat plate collector - Specification: Part 1 requirements (Second Revision)

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Components: The various components of solar flat plate collector shall be as specified in IS 12933 (Part 2))	-	1500	-
4(Components: The various components of solar flat plate collector shall be as specified in IS 12933 (Part 2))	-	1500	-
4(Components: The various components of solar flat plate collector shall be as specified in IS 12933 (Part 2))	-	1500	-
4(Components: The various components of solar flat plate collector shall be as specified in IS 12933 (Part 2))	-	1500	-
4(Components: The various components of solar flat plate collector shall be as specified in IS 12933 (Part 2))	-	1500	-
4(Components: The various components of solar flat plate collector shall be as specified in IS 12933 (Part 2))	-	1500	-
4(Components: The various components of solar flat plate collector shall be as specified in IS 12933 (Part 2))	-	1500	-
4(Components: The various components of solar flat plate collector shall be as specified in IS 12933 (Part 2))	-	1500	-
4(Components: The various components of solar flat plate collector shall be as specified in IS 12933 (Part 2))	-	1500	-
4(Components: The various components of solar flat plate collector shall be as specified in IS 12933 (Part 2))	-	1500	-
4(Components: The various components of solar flat plate collector shall be as specified in IS 12933 (Part 2))	-	1500	-
7.1.1(Static Pressure Leakage Test)	-	1500	-
7.2.1(Outdoor No Flow Exposure Test )	-	1500	-
7.2.2(External Thermal Shock Test )	-	1500	-
7.2.2(Internal Thermal Shock Test )	-	1500	-
7.2.4(Rain Penetration Test)	-	1500	-
7.2.5(Impact Resistance Test)	-	1500	-
7.2.6(Thermal Efficiency Test)	-	15000	-
7.2.7(Determination of the Time Constant )	-	1500	-
7.2.8(Incident Angle Modifier Test)	-	10000	-
7.2.8(Incident Angle Modifier Test)	-	10000	-
4(Cover Plate, Material ( Cl. 4 of IS 12933 (Part 2))	-	1500	-
4(Cover Plate, Material ( Cl. 4 of IS 12933 (Part 2))	-	1500	-
4(Cover Plate, Material ( Cl. 4 of IS 12933 (Part 2))	-	1500	-
4(Collector box, Material (Cl.6.1 of IS 12933 (Part 2))	-	1500	-
4(Collector box, i) Aluminium: a) Channel section for sides (Cl.6.2 of IS 12933 (Part 2))	-	1500	-
4(Collector box, i) Aluminium: b) Sheet for bottom (Cl.6.2 of IS 12933 (Part 2))	-	1500	-
4(Collector box, i) Aluminium: c) Support for glass retaining, (Cl.6.2 of IS 12933 (Part 2))	-	1500	-
4(Collector box, i) Aluminium: d) Sheet for entire body(Cl.6.2 of IS 12933 (Part 2))	-	1500	-
4(Collector box,ii) Fibre glass (Cl.6.2 of IS 12933 (Part 2))	-	1500	-
4(Collector box, iii) Galvanized/stainless steel sheet (Cl.6.2 of IS 12933 (Part 2))	-	1500	-
4(Collector box, iv) CRCA/HRC (Cl.6.2 of IS 12933 (Part 2))	-	1500	-
4(Absorber (Cl.9.1.3 of IS 12933 (Part 2))	-	1500	-
4(Absorber -Temperature test (Cl.9.1.4 of IS 12933 (Part 2))	-	1500	-
4(Riser and Headers- Static Pressure Leakage Test ( Cl. 9.2.1 of IS 12933 (Part 2))	-	1500	-
4(Bonding Between Riser and Sheet ( Cl. 9.2.2.1 of IS 12933 (Part 2))	-	1500	-
4(Bonding Between Riser and Sheet ( Cl. 9.2.2.2 of IS 12933 (Part 2))	-	1500	-
4(Collector Box Insulation- Back and Side Insulation ( Cl. 10.1 of IS 12933 (Part 2))	-	1500	-
4(Collector Box Insulation- Back and Side Insulation ( Cl. 10.2 of IS 12933 (Part 2))	-	1500	-
4(Workmanship and Finish (Cl.7.1 of IS 12933 (Part 2))	-	1500	-
4(Gaskets and Grommets- Materials ( Cl. 11.1 of IS 12933 (Part 2))	-	1500	-
4(Gaskets and Grommets- Materials ( Cl.11.2 of IS 12933 (Part 2))	-	1500	-
4(Thermal shock Test -Gaskets and Grommets (Cl.12.1 of IS 12933 (Part 2))	-	1500	-
5(Shape and Dimensions)	-	2000	-
6.1(Assembley and Workmanship)	-	1000	-
6.2(Assembley and Workmanship)	-	1000	-
6.3(Assembley and Workmanship)	-	1000	-
6.4(Assembley and Workmanship)	-	1000	-
4(Workmanship and Finish, b) Electroplated zinc coating (Cl.7.2 of IS 12933 (Part 2))	-	1500	-
4(Workmanship and Finish, b) Electroplated zinc coating (Cl.7.2 of IS 12933 (Part 2))	-	1500	-
4(Workmanship and Finish, c) Powder coating (Cl.7.2 of IS 12933 (Part 2))	-	1500	-
4(Workmanship and Finish, c) Powder coating (Cl.7.2 of IS 12933 (Part 2))	-	1500	-
4(Fabrication - Aluminium Box (Cl.8.1 of IS 12933 (Part 2))	-	1500	-
4(Fabrication - Fibre glass boxes (Cl.8.2 of IS 12933 (Part 2))	-	1500	-
4(Fabrication- Al/CRCA/HRC//Galvanised steel /any other material (Cl.8.3 of IS 12933 (Part 2))	-	1500	-
4(Absorber (Cl.9.1 of IS 12933 (Part 2))	-	1500	-
4(Absorber (Cl.9.1.1 of IS 12933 (Part 2))	-	1500	-
4(Absorber (Cl.9.1.2 of IS 12933 (Part 2))	-	1500	-
5(SHAPE AND DIMENSIONS)	-	2000	-

23 Jun, 2028

-
-

1677

ACE TEST HOUSE PRIVATE LIMITED (8161906), NEW DELHI

8161906

IS 848 (2025)

Synthetic Resin Adhesives for Plywood (Phenolic, Aminoplastic and Bio-Materials Based) - Specification ( Third Revision )

BWP, BWR or MR

7200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 4 Table 1(TYPES)	-	100	-
As per Clause 6.6(SETTING TIMES AND CONDITIONS)	-	300	-
As per Clause 7.3.2 Table 1(i)(Cyclic Test For BWP Type)	-	4000	-
As per Clause 7.3.2 Table 1(ii)(Cyclic Test For BWR Type)	-	4000	-
As per Clause 7.3.2 Table 1(iii)(Cyclic Test For MR Type)	-	4000	-
As per Clause 7.4(Acidity And Alkalinity (pH))	-	2500	-
As per Clause 9(Marking)	-	300	-

26 Aug, 2027

-
Included w.e.f. 24.12.2025

1678

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 2681 (1993)

Non - Ferrous metal sliding door bolts (Aldrops) for use with padlocks - Specification (Third Revision)

ALL

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 8.1(Brass sliding door bolts shall have satin finish or shall be polished or plated as specified by the purchaser)	-	0	-
Cl. 8.2 (Ref. Cl. 11.1 of IS 1868:1996)( appearance and Colour - shall be free from visible defects on the significant surface(s) when viewed from an agreed distance)	-	0	-
Cl. 8.2 (Ref. Cl.9 of IS 1868:1996)(Aluminium shall be anodized to a bright, natural, sat or satin finish or dyed. )	-	20000	-
Cl. 8.2 (Ref. Cl.9 of IS 1868:1996)(Anodinc casting thickness (Cl. 9.2 of IS 1868:1996))	-	20000	-
3(TYPES)	-	0	-
4(SIZES)	-	20000	-
6.1-Total 2(DIMENSIONS AND TOLERANCES-A)	-	20000	-
6.1-Total 2(DIMENSIONS AND TOLERANCES-B)	-	20000	-
6.1-Total 2(DIMENSIONS AND TOLERANCES-C)	-	20000	-
6.1-Total 2(DIMENSIONS AND TOLERANCES-D)	-	20000	-
6.1-Total 2(DIMENSIONS AND TOLERANCES-E)	-	20000	-
6.1-Total 2(DIMENSIONS AND TOLERANCES-F)	-	20000	-
6.1-Total 2(DIMENSIONS AND TOLERANCES-G)	-	20000	-
6.1-Total 2(DIMENSIONS AND TOLERANCES-H)	-	20000	-
6.1-Total 2(DIMENSIONS AND TOLERANCES-J)	-	20000	-
6.1-Total 2(DIMENSIONS AND TOLERANCES-K)	-	20000	-
6.1-Total 2(DIMENSIONS AND TOLERANCES-L)	-	20000	-
6.1-Total 2(DIMENSIONS AND TOLERANCES-M)	-	20000	-
6.1-Total 2(DIMENSIONS AND TOLERANCES-N)	-	20000	-
6.1-Total 2(DIMENSIONS AND TOLERANCES-Q)	-	20000	-
6.1-Total 2(DIMENSIONS AND TOLERANCES-S)	-	20000	-
6.1-Total 2(DIMENSIONS AND TOLERANCES-T)	-	20000	-
6.1-Total 2(DIMENSIONS AND TOLERANCES-W)	-	20000	-
6.1-Total 2(DIMENSIONS AND TOLERANCES-No. of Screw on Staple or Clip to accommodate Wood Screw N0 8)	-	20000	-
6.1-Table 3(DIMENSIONS AND TOLERANCES-A)	-	20000	-
6.1-Table 3(DIMENSIONS AND TOLERANCES-B)	-	20000	-
6.1-Table 3(DIMENSIONS AND TOLERANCES-C)	-	20000	-
6.1-Table 3(DIMENSIONS AND TOLERANCES-D)	-	20000	-
6.1-Table 3(DIMENSIONS AND TOLERANCES-E)	-	20000	-
6.1-Table 3(DIMENSIONS AND TOLERANCES-F)	-	20000	-
6.1-Table 3(DIMENSIONS AND TOLERANCES-G)	-	20000	-
6.1-Table 3(DIMENSIONS AND TOLERANCES-H)	-	20000	-
6.1-Table 3(DIMENSIONS AND TOLERANCES-J)	-	20000	-
6.1-Table 3(DIMENSIONS AND TOLERANCES-K)	-	20000	-
6.1-Table 3(DIMENSIONS AND TOLERANCES-L)	-	20000	-
6.1-Table 3(DIMENSIONS AND TOLERANCES-M)	-	20000	-
6.1-Table 3(DIMENSIONS AND TOLERANCES-Pin dia)	-	20000	-
6.1-Table 3(DIMENSIONS AND TOLERANCES-R)	-	20000	-
6.1-Table 3(DIMENSIONS AND TOLERANCES-T)	-	20000	-
6.1-Table 3(DIMENSIONS AND TOLERANCES-U)	-	20000	-
6.1-Table 3(DIMENSIONS AND TOLERANCES-No. of Screw on Staple or Clip to accommodate Wood Screw N0 8)	-	20000	-
7.1(MANUFACTURE-General)	-	0	-
7.1(MANUFACTURE-General)	-	0	-
7.1(MANUFACTURE-General)	-	0	-
7.1(MANUFACTURE-General)	-	0	-
7.1(MANUFACTURE-General)	-	0	-
7.2(MANUFACTURE-Brass Sliding Door Bolts or Aluminium Alloy Sliding Door Bolts)	-	0	-
7.2(MANUFACTURE-Brass Sliding Door Bolts or Aluminium Alloy Sliding Door Bolts)	-	0	-
8.1(FINISH)	-	0	-
8.2(FINISH)	-	20000	-
8.2(FINISH-anodic casting -Min Avg thickness)	-	20000	-
8.2(FINISH-anodic casting -Min Local thickness)	-	20000	-
7.2(Brass/Aluminium alloy door bolt)	-	0	-
7.2(Aluminium alloy door bolt)	-	0	-
7.1(General)	-	0	-
6.1 Fig 1(Dimensions & Tolerances)	-	20000	-
6.1 Fig 1(Dimensions & Tolerances)	-	20000	-
6.1 Fig 1(Dimensions & Tolerances)	-	20000	-
6.1 Fig 1(Dimensions & Tolerances)	-	20000	-
6.1 Fig 1(Dimensions & Tolerances)	-	20000	-
6.1 Fig 1(Dimensions & Tolerances)	-	20000	-
6.1 Fig 1(Dimensions & Tolerances)	-	20000	-
6.1 Fig 1(Dimensions & Tolerances)	-	20000	-
6.1 Fig 1(Dimensions & Tolerances)	-	20000	-
6.1 Fig 1(Dimensions & Tolerances)	-	20000	-
6.1 Fig 1 & Table 3(Dimensions & Tolerances)	-	20000	-
6.1 Fig 1 & Table 3(Dimensions & Tolerances)	-	20000	-
6.1 Fig 1 & Table 3(Dimensions & Tolerances)	-	20000	-
6.1 Fig 1 & Table 3(Dimensions & Tolerances)	-	20000	-
6.1 Fig 1 & Table 3(Dimensions & Tolerances)	-	20000	-
6.1 Fig 1 & Table 3(Dimensions & Tolerances)	-	20000	-
6.1 Fig 1 & Table 3(Dimensions & Tolerances)	-	20000	-
6.1 Fig 1 & Table 3(Dimensions & Tolerances)	-	20000	-
6.1 Fig 1 & Table 3(Dimensions & Tolerances)	-	20000	-
6.1 Fig 1 & Table 3(Dimensions & Tolerances)	-	20000	-
6.1 Fig 1 & Table 3(Dimensions & Tolerances)	-	20000	-
6.1 Fig 1 & Table 3(Dimensions & Tolerances)	-	20000	-
6.1 Fig 1 & Table 3(Dimensions & Tolerances)	-	20000	-
6.1 Fig 1 & Table 3(Dimensions & Tolerances)	-	20000	-
6.1 Fig 1 & Table 3(Dimensions & Tolerances)	-	20000	-
6.1 Fig 1 & Table 3(Dimensions & Tolerances)	-	20000	-
6.1 Fig 1 & Table 3(Dimensions & Tolerances)	-	20000	-
4.0(Sizes)	-	0	-
3.1(Sliding Door Bolts)	-	0	-

-
Included w.e.f 06.01.2026

1679

Samridhi Test House Pvt. Ltd.

8184706

IS 302 : Part 2 : Sec 201 (2008)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 201 electric immersion water heaters (First Revision)

All Grade / Type / Size / Designation

6900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 of IS 302-‐2-‐201:2008(Classification)	-	200	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	300	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.8 of IS 302‐2-201: 2008(Protection Against Access to Live Parts)	-	200	-
Cl.10 of IS 302‐2‐201:2008(Power Input and Current )	-	300	-
Cl.11 of IS 302-2201: 2008(Heating)	-	500	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.13 of IS 302-2-201: 2008(Leakage Current & Electric Strength at Operating Temperature)	-	300	-
Cl.14 of IS 302‐2-201:2008(Transient Over Voltages )	-	200	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	500	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	0	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	300	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	0	-
Cl.17 of IS 302‐2-201: 2008(Overload Protection of Transformers & Associated Circuits)	-	200	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	500	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	0	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	0	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	0	-
Cl.20 of IS 302-2-201: 2008(Stability & Mechanical Hazards)	-	200	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	200	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	0	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	0	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	300	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	300	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	200	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	200	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.26 of IS 302-2-201: 2008(Terminals for External Conductors)	-	200	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	200	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	-
Cl.28 of IS 302-2-201: 2008(Screws & Connections )	-	200	-
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	200	-
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	400	-
Cl.31 of IS 302-2-201:2008(Resistance of Rusting )	-	200	-
Cl.32 of IS 302-2-201:2008(Radiation, Toxicity and Similar Hazards)	-	200	-
19.11.4.7(Harmonics)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
4(GENERAL REQUIREMENTS)	-	200	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	200	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-

-
Included w.e.f 06.01.2026 "19.11.4.1 (Electrostatic discharges) 19.11.4.2 (Radiated fields) 19.11.4.3 (Fast transient bursts) 19.11.4.4 (Surge immunity test) 19.11.4.5 (Immunity to conducted discharges) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.7 (Harmonics)"

1680

BIS, Central Laboratory (CL)

None

IS 14490 (2024)

Plain Copier Paper â Specification (Second Revision)

Rs. 4,130/- approx. View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.3 (Grammage (Substance))	-
5.4 (Thickness)	-
5.5 (Size)	-
5.6, Table 1, i (ISO brightness, percent, Min)	-
5.6, Table 1, ii (Opacity, percent, Min)	-
5.6, Table 1, iii (One minute cobb test, both sides, g/m2 , Max)	-
5.6, Table 1, iv (Surface strength, Dennison (Wax Pick))	-
5.6, Table 1, v (Smoothness for both sides (Bendsten), ml/min, Max)	-
5.6, Table 1, vi (Ash content (at 900 °C), percent by mass, Max)	-
5.6, Table 1, vii (Taber stiffness, Min: Machine direction, Cross direction)	-
5.6, Table 1, viii (Tear Index, mN.m2 /g, Min: Machine direction, Cross direction)	-
5.6, Table 1, ix (Tensile index, N.m/g, Min: Machine direction, Cross direction)	-
5.1.1 (plain copier paper)	-
5.3 (Grammage (Substance))	-
5.4 (Thickness)	-
5.5 (Size)	-
5.6, Table 1, i (ISO brightness, percent, Min)	-
5.6, Table 1, ii (Opacity, percent, Min)	-
5.6, Table 1, iii (One minute cobb test, both sides, g/m2 , Max)	-
5.6, Table 1, iv (Surface strength, Dennison (Wax Pick))	-
5.6, Table 1, v (Smoothness for both sides (Bendsten), ml/min, Max)	-
5.6, Table 1, vi (Ash content (at 900 °C), percent by mass, Max)	-
5.6, Table 1, vii (Taber stiffness, Min: Machine direction, Cross direction)	-
5.6, Table 1, viii (Tear Index, mN.m2 /g, Min: Machine direction, Cross direction)	-
5.6, Table 1, ix (Tensile index, N.m/g, Min: Machine direction, Cross direction)	-
5.2 (Moisture)	-

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number