BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15122 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

1621

Mbis Tescon Private Limited

8190506

IS 7834 : Part 2 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 2 Specific requirements for 45 degrees elbows

All variety

6400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(General)	-	5000	fitting:6400 & Resin :6000 for bis testing charges and for others 1.5 time of bis testing charges
2.2(Manufacture)	-	100	-
2.2.2, Table 1(Size)	-	100	-
2.2.2, Table 1(45 ̊ Elbow Laying Length)	-	100	-
2.2.3( inside diameter of the socket)	-	100	-
2.2.3(socket length)	-	100	-
6.4 PART-1(Short term hydraulic test)	-	1000	-
6.1.1(VCM Content Test)	-	6000	-
table 1 sl.no: 01(16 )	-	0	-
table 1 sl.no: 02(20 )	-	0	-
table 1 sl.no: 03(25 )	-	0	-
table 1 sl.no: 04(32 )	-	0	-
table 1 sl.no: 05(40 )	-	0	-
table 1 sl.no: 06(50 )	-	0	-
table 1 sl.no: 07(63 )	-	0	-
table 1 sl.no: 08(75 )	-	0	-
table 1 sl.no: 09(90 )	-	0	-
table 1 sl.no: 10(110 )	-	0	-
table 1 sl.no: 11(125 )	-	0	-
table 1 sl.no: 12(140 )	-	0	-
table 1 sl.no: 13(160 )	-	0	-
table 1 sl.no: 14( 180 )	-	0	-
table 1 sl.no: 15(200 )	-	0	-
table 1 sl.no: 16(225 )	-	0	-
table 1 sl.no: 17(250.0)	-	0	-
table 1 sl.no: 18(280.0)	-	0	-
table 1 sl.no: 19(315.0)	-	0	-
2.1(General)	-	0	-
2.2(Manufacture)	-	0	-
2.2.2, Table 1(Size)	-	0	-
2.2.2, Table 1(45 ̊ Elbow Laying Length)	-	0	-
2.2.3( inside diameter of the socket)	-	0	-
2.2.3(socket length)	-	0	-
2.2.2 table 1(Laying Length)	-	0	-

-
Included w.e.f 24.12.2025

1622

Mbis Tescon Private Limited

8190506

IS 7834 : Part 1 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 1 General requirements

All variety

6400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4(Minimum Thickness)	-	100	fitting:6400 & Resin :6000 for bis testing charges and for others 1.5 time of bis testing charges
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Minimum Socket Length)	-	100	-
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Mean Socket Internal Diameter at Mid-Point of Socket Length)	-	100	-
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Out-of-roundness tolerances of socket inside diameter)	-	100	-
Cl. 6.1(Stress Relief Test- Appendix A)	-	1000	-
Cl. 6.2(Opacity- Appendix B)	-	1000	-
6.3(Effect on Water)	-	3000	-
6.4(Short-Term Hydraulic Test)	-	1000	-
6.1.1(VCM Content Test)	-	6000	-
Cl. 6.3(Effect on Water[(Lead ( third extraction )]- Appendix C)	-	0	-
Cl. 6.3(Effect on Water [Dialkyl tin C4, and higher homologues, measured as tin ( third extraction )]- Appendix C)	-	0	-
Cl. 6.3(Effect on Water [Other toxic substances ( third extraction )]- Appendix C)	-	0	-
Cl. 6.4(Short-Term Hydraulic Test- Appendix D)	-	0	-
Cl. 6.3(Effect on Water[(Lead ( first extraction )]- Appendix C)	-	0	-
3(Size of Fitting -)	-	0	-
4(Minimum thickness)	-	0	-
5(Socket dimensions)	-	0	-
6.1(Stress Relief Test)	-	0	-
6.2(Opacity)	-	0	-
7.2(Production Routine Tests)	-	0	-
Cl 6.3(Effect on Water Lead (first extraction))	-	0	-
Cl 6.3(Effect on Water Lead (third extraction))	-	0	-
Cl 6.3(Effect on Water Dialkyl tin C4 and higher homologues(measuredas tin )(third extraction ))	-	0	-
Cl 6.3(Effect on Water Cadmium (mean of first extraction, second extraction and third extraction))	-	0	-
Cl 6.3(Effect on Water Mercury (mean of first extraction, second extraction and third extraction))	-	0	-
CL 4.0(Wall thickness (average of 4.0))	-	0	-
CL 5.1(Sockt Length ( Take 4 reading and minimum will be reported))	-	0	-

-
Included w.e.f 24.12.2025

1623

Mbis Tescon Private Limited

8190506

IS 8360 (2022)

Fabricated Polyethylene Fittings for Water Supply ï¿½ Specification (First Revision)

All vriety upto size 500 mm

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Materials)	-	14000	Fittings:6000 & material :14000 As per IS 4984 for bis testing charges and for others 1.5 time of bis testing charges
5(Sizes and Designation of Fittings)	-	200	-
6(Visual Appearance)	-	200	-
7(Dimensions of Fittings)	-	600	-
8.1(Hydraulic Characteristics)	-	4000	-
8.2(Tensile Strength for Butt-Fusion)	-	1000	-
9.1.2(Type Tests for Fittings Sizes)	-	0	-
9.2.2(Lot)	-	0	-
9.2.3(Visual and Dimensional Requirements for Fabricated PE Fittings)	-	0	-
9.2.4.1(Fittings sizes up to 560 mm)	-	0	-
9.2.4.2(Fittings sizes including and above 630 mm)	-	0	-
10(Marking)	-	0	-

-
Included w.e.f 24.12.2025

1624

PIONEER TESTING LABORATORY PRIVATE LIMITED

8176806

IS 4021 (1995)

Timber door, window and ventilator frames - specification

17000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.1.1(Indian timbers)	-	1000	-
Clause 4.1.2(Moisture Content)	-	2000	-
Clause 4.1.3(Seasoning and Treatment)	-	2000	-
Clause 4.1.5(Defects Permitted)	-	1000	-
Clause 5(CONSTRUCTION AND WORKMANSHIP)	-	2000	-
Clause 6.1(Dimensions of Frames and Tolerances)	-	2000	-
Clause 6.2(Sizes and Types)	-	2000	-
Clause 6.3(Deslgn.tlon)	-	1000	-
Clause 8.2(unexposed surfaces)	-	1500	-
Clause 8.3(surfacesof door)	-	1500	-
Clause 9(SAMPLING)	-	500	-
Clause 10(Marking)	-	500	-
Clause 4.1.1(Indian timbers)	-	0	-
Clause 4.1.2(Moisture Content)	-	0	-
Clause 4.1.3(Seasoning and Treatment)	-	0	-
Clause 4.1.5(Defects Permitted)	-	0	-
Clause 5(CONSTRUCTION AND WORKMANSHIP)	-	0	-
Clause 6.1(Dimensions of Frames and Tolerances)	-	0	-
Clause 6.2(Sizes and Types)	-	0	-
Clause 6.3(Deslgn.tlon)	-	0	-
Clause 8.2(unexposed surfaces)	-	0	-
Clause 8.3(surfacesof door)	-	0	-
Clause 9(SAMPLING)	-	0	-
Clause 10(Marking)	-	0	-
Clause 4.1.1(Indian timbers)	-	0	-
Clause 4.1.2(Moisture Content)	-	0	-
Clause 4.1.3(Seasoning and Treatment)	-	0	-
Clause 4.1.5(Defects Permitted)	-	0	-
Clause 5(CONSTRUCTION AND WORKMANSHIP)	-	0	-
Clause 6.1(Dimensions of Frames and Tolerances)	-	0	-
Clause 6.2(Sizes and Types)	-	0	-
Clause 6.3(Deslgn.tlon)	-	0	-
Clause 8.2(unexposed surfaces)	-	0	-
Clause 8.3(surfacesof door)	-	0	-
Clause 9(SAMPLING)	-	0	-
Clause 10(Marking)	-	0	-

-
Included w.e.f 31.12.2025

1625

DELHI TEST HOUSE (65) KUNDLI-2 SONIPAT

9138006

IS 9079 (2018)

Monoset pumps for clear, cold water for agricultural and water supply purposes - Specification (Third Revision)

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1(GENERAL REQUIREMENTS Casing)	-	100	-
10.2(GENERAL REQUIREMENTS Impeller)	-	100	-
10.3(GENERAL REQUIREMENTS Shaft)	-	100	-
7.1(DIRECTION OF ROTATION (Cl 7))	-	100	-
7.2(DIRECTION OF ROTATION (Cl 7))	-	100	-
9.1(DESIGN FEATURES (Cl 9))	-	100	-
9.2(DESIGN FEATURES (Cl 9))	-	100	-
13.1(Guarantee and tolerances on Pump Performance (Cl 13))	-	500	-
13.2(Guarantee and tolerances on Pump Performance (Cl 13))	-	500	-
8.2 IS 11346 : 2002(Verification of Guarantee Rate of flow and head (Cl.8.2 IS 11346 : 2002))	-	200	-
8.2 IS 11346 : 2002(Verification of Guarantee Rate of flow and head (Cl.8.2 IS 11346 : 2002))	-	200	-
12.5(Efficiency)	-	300	-
Cl.8.3 b IS 11346 : 2002(Overall efficiency)	-	300	-
Cl13.2.3 IS 9079:2002(Current consumption)	-	200	-
9.1(DESIGN FEATURES (Cl 9))	-	100	-
9.2(DESIGN FEATURES (Cl 9))	-	100	-
13.1(Guarantee and tolerances on Pump Performance (Cl 13))	-	500	-
13.2(Guarantee and tolerances on Pump Performance (Cl 13))	-	500	-
13.1.1 (8.2 of IS 11346 : 2002)(Verification of Guarantee Rate of flow and head (Cl.8.2 IS 11346 : 2002))	-	200	-
13.1.1 (8.2 of IS 11346 : 2002)(Verification of Guarantee Rate of flow and head (Cl.8.2 IS 11346 : 2002))	-	200	-
12.5(Efficiency)	-	500	-
Cl.8.3 b IS 11346 : 2002(Overall efficiency)	-	300	-
Cl13.2.3 IS 9079:2002(Current consumption)	-	200	-
7(Contructional Features)	-	100	-
7.1(Material of Construction)	-	100	-
7.2(Gaskets.Seals and packings)	-	100	-
9(Design Features)	-	100	-
9.1.1(The pump may be equipped with replaceable bearing and wearing ring, wherever provided.)	-	100	-
9.1.2(The pump shall be capable to perform as per guaranteed duty point at the manometric suction lift as specified in Table 1.)	-	100	-
9.3(The manufacturer shall have a system of controlling dimensional accuracy within a scheme of fits and tolerance limits. The system shall help interchangeability and fitment at site for replacement spares during subsequent repair and maintenance.)	-	200	-
9.4(The pump efficiency of monoset pumps at duty point as declared by the manufacturer for 2 and 4 poles shall not be less than given in Fig. 3 to Fig. 6 and beyond this range, the efficiency shall be declared by manufacturer.)	-	500	-
10(General Requirements)	-	100	-
10.1(General Requirements(Casing))	-	100	-
10.2(General Requirements(Impeller))	-	100	-
10.3(General Requirements(Shaft))	-	100	-
10.4.1, 10.4.2, 10.4.3, 10.4.4(General Requirements(Balancing))	-	500	-
10.5(Provision of Earthing)	-	200	-
10.6.1(Terminal Marking)	-	200	-
10.6.2, 10.6.3(Direction of Rotation)	-	100	-
11.8(Type test)	-	300	-
11.8.1(a)(Measurement of stator resistance)	-	300	-
11.8.1(b)(High Voltage test)	-	1000	-
11.8.1(c)(Insulation Resistance test)	-	1000	-
11.8.1(d)(No load test at rated voltage)	-	500	-
11.8.1(e)(Locked rotor)	-	500	-
11.8.1(f)(Breakaway (starting) torque)	-	500	-
11.8.1(g)(Reduced voltage running up test at no load)	-	500	-
11.8.1(h)(Temperature rise test at rated voltage)	-	1000	-
11.8.1(j)(Temperature rise test at reduced voltage)	-	1000	-
13.1.1(The pumpset shall be guaranteed for their performance of the nominal volume rate of flow and the nominal head at the guaranteed duty point. The overall efficiency of the pumpset shall be guaranteed at the declared duty point only.)	-	500	-
13.1.2(The guarantee shall be deemed to have been met with, if the measured values of head, volume rate of flow and overall efficiency are within the limits indicated in clause 8 of IS 11346. However, after applying the tolerance, overall efficiency value shall not be less than that derived from Fig. 3 to 6.)	-	500	-
13.1.3(Monoset motor shall not get overloaded in the specified operating head range at rated voltage and supply frequency.)	-	500	-
13.1.4(The tolerance shall apply to guaranteed duty point only.)	-	200	-
8.6.5(If four core cable is used, the fourth core is to be used for earthing.)	-	100	-
15.1(Marking)	-	1500	-
15.1(Marking)	-	1500	-
15.1(Marking)	-	1500	-
15.1(Marking)	-	1500	-
15.1(Marking)	-	1500	-
15.1(Marking)	-	1500	-
15.1(Marking)	-	1500	-
15.1(Marking)	-	1500	-
15.1(Marking)	-	1500	-
15.1(Marking)	-	1500	-
15.1(Marking)	-	1500	-
15.1(Marking)	-	1500	-
15.1(Marking)	-	1500	-
15.1(Marking)	-	1500	-
15.1(Marking)	-	1500	-
15.1(Marking)	-	1500	-
15.1(Marking)	-	1500	-
15.1(Marking)	-	1500	-
15.1(Hydrostatic Pressure Test)	-	500	-
13.5(Minimum Current Requirement)	-	200	-
11.1.1(Type of Enclosures)	-	200	-
12.2(Laboratory Test)	-	500	-
13(Guarantee and tolerance on pump performance)	-	500	-
13.4.1 (Amendment-1)(Pump Efficiency)	-	500	-

-
included w.e.f 27.01.2026

1626

ACE TEST HOUSE PRIVATE LIMITED (8161906), NEW DELHI

8161906

IS 1237 (2012)

Cement Concrete Flooring Tiles - Specification

Class-General Purpose/Heavy Duty Floor Tile, Type.Plain Cement Tile,Plain Colour Tile,Terrazzo Tile

5760 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7.1(Length, Breadth, Minimum thickness, Difference in length of side between the longest side and shorterst side, Half tiles, Difference in Thickness between the thickest and thinnest tile, Thickness of wearing layer)	-	500	-
Cl 12.2(Concavity & Convexity )	-	0	-
Cl 12.3(The Maximum gap between the arms of the square and the edge of the title shall notexceed 2 percent of the length.)	-	500	-
Cl 12.4(Shall not exceed 1 percent of the length of the edge.)	-	500	-
Cl 12.5(Water absorption)	-	1000	-
Cl 12.6(Wet transverse strength )	-	1500	-
Cl 12.7(Resistance to wear)	-	1260	-
Cl 11(Suface Finish)	-	500	-
Cl 7.1(Length, Breadth, Minimum thickness, Difference in length of side between the longest side and shorterst side, Half tiles, Difference in Thickness between the thickest and thinnest tile, Thickness of wearing layer)	-	0	-
Cl 12.2(Concavity & Convexity )	-	0	-
Cl 12.3(The Maximum gap between the arms of the square and the edge of the title shall notexceed 2 percent of the length.)	-	0	-
Cl 12.4(Shall not exceed 1 percent of the length of the edge.)	-	0	-
Cl 12.5(Water absorption)	-	0	-
Cl 12.6(Wet transverse strength )	-	0	-
Cl 12.7(Resistance to wear)	-	0	-
Cl 11(Suface Finish)	-	0	-
Cl 7.1(Length, Breadth, Minimum thickness, Difference in length of side between the longest side and shorterst side, Half tiles, Difference in Thickness between the thickest and thinnest tile, Thickness of wearing layer)	-	0	-
Cl 12.2(Concavity & Convexity )	-	0	-
Cl 12.3(The Maximum gap between the arms of the square and the edge of the title shall notexceed 2 percent of the length.)	-	0	-
Cl 12.4(Shall not exceed 1 percent of the length of the edge.)	-	0	-
Cl 12.5(Water absorption)	-	0	-
Cl 12.6(Wet transverse strength )	-	0	-
Cl 12.7(Resistance to wear)	-	0	-
Cl 11(Suface Finish)	-	0	-
Cl 7.1(Length, Breadth, Minimum thickness, Difference in length of side between the longest side and shorterst side, Half tiles, Difference in Thickness between the thickest and thinnest tile, Thickness of wearing layer)	-	0	-
Cl 12.2(Concavity & Convexity )	-	0	-
Cl 12.3(The Maximum gap between the arms of the square and the edge of the title shall notexceed 2 percent of the length.)	-	0	-
Cl 12.4(Shall not exceed 1 percent of the length of the edge.)	-	0	-
Cl 12.5(Water absorption)	-	0	-
Cl 12.6(Wet transverse strength )	-	0	-
Cl 12.7(Resistance to wear)	-	0	-
Cl 11(Suface Finish)	-	0	-
Cl 7.1(Length, Breadth, Minimum thickness, Difference in length of side between the longest side and shorterst side, Half tiles, Difference in Thickness between the thickest and thinnest tile, Thickness of wearing layer)	-	0	-
Cl 12.2(Concavity & Convexity )	-	0	-
Cl 12.3(The Maximum gap between the arms of the square and the edge of the title shall notexceed 2 percent of the length.)	-	0	-
Cl 12.4(Shall not exceed 1 percent of the length of the edge.)	-	0	-
Cl 12.5(Water absorption)	-	0	-
Cl 12.6(Wet transverse strength )	-	0	-
Cl 12.7(Resistance to wear)	-	0	-
Cl 11(Suface Finish)	-	0	-
Cl 7.1(Length, Breadth, Minimum thickness, Difference in length of side between the longest side and shorterst side, Half tiles, Difference in Thickness between the thickest and thinnest tile, Thickness of wearing layer)	-	0	-
Cl 12.2(Concavity & Convexity )	-	0	-
Cl 12.3(The Maximum gap between the arms of the square and the edge of the title shall notexceed 2 percent of the length.)	-	0	-
Cl 12.4(Shall not exceed 1 percent of the length of the edge.)	-	0	-
Cl 12.5(Water absorption)	-	0	-
Cl 12.6(Wet transverse strength )	-	0	-
Cl 12.7(Resistance to wear)	-	0	-
Cl 11(Suface Finish)	-	0	-
Cl 11(Suface Finish)	-	0	-
Cl 12.7(Resistance to wear)	-	0	-
Cl 12.6(Wet transverse strength )	-	0	-
Cl 12.5(Water absorption)	-	0	-
Cl 12.4(Shall not exceed 1 percent of the length of the edge.)	-	0	-
Cl 12.3(The Maximum gap between the arms of the square and the edge of the title shall notexceed 2 percent of the length.)	-	0	-
Cl 12.2(Concavity & Convexity )	-	0	-
Cl 7.1(Length, Breadth, Minimum thickness, Difference in length of side between the longest side and shorterst side, Half tiles, Difference in Thickness between the thickest and thinnest tile, Thickness of wearing layer)	-	0	-
Cl 11(Suface Finish)	-	0	-
Cl 12.7(Resistance to wear)	-	0	-
Cl 12.6(Wet transverse strength )	-	0	-
Cl 12.5(Water absorption)	-	0	-
Cl 12.4(Shall not exceed 1 percent of the length of the edge.)	-	0	-
Cl 12.3(The Maximum gap between the arms of the square and the edge of the title shall notexceed 2 percent of the length.)	-	0	-
Cl 12.2(Concavity & Convexity )	-	0	-
Cl 7.1(Length, Breadth, Minimum thickness, Difference in length of side between the longest side and shorterst side, Half tiles, Difference in Thickness between the thickest and thinnest tile, Thickness of wearing layer)	-	0	-

26 Aug, 2027

-
Included w.e.f. 24.12.2025

1627

ACE TEST HOUSE PRIVATE LIMITED (8161906), NEW DELHI

8161906

IS 16720 (2018)

Pulverized Fuel Ash-Cement Bricks- Specification

Grade-I,II Class-3.5,5,7.5,10,12.5,15

7200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1 and fig.1A &1B(Dimensions- Length (L) )	-	200	-
4.1 and fig.1A &1B(Dimensions- Width (B) )	-	200	-
4.1 and fig.1A &1B(Dimensions- Height (H))	-	200	-
4.1 & 4.3 and fig.1A &1B(Dimensions - Depth)	-	200	-
4.1 and fig.1A &1B(Dimensions)	-	200	-
4.1 and fig.1A &1B(Dimensions)	-	200	-
5 and Tanle 1 (CLASSIFICATION)	-	200	-
8.1(GENERAL)	-	300	-
8.3(Density Annex C of IS 2185 (Part 1))	-	1000	-
8.4 and Table 1(Compressive Strength - Individual IS 3495 (Part 1))	-	1500	-
8.4 and Table 1(Compressive Strength - Average IS 3495 (Part 1))	-	500	-
8.5(Drying Shrinkage IS 4139)	-	1500	-
8.6(Water Absorption IS 3495 (Part 2))	-	1000	-

26 Aug, 2027

-
Included w.e.f. 24.12.2025

1628

ACE TEST HOUSE PRIVATE LIMITED (8161906), NEW DELHI

8161906

IS 4885 (1988)

Specification for sewer bricks (First Revision)

5600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Dimensions)	-	500	-
3.2(Tolerances)	-	200	-
3.3(Warpage)	-	1000	-
4(General Quality)	-	200	-
5(Compressive Strength)	-	1000	-
6(Water Absorption)	-	1000	-
7(Efflorescence)	-	1500	-
9(Marking)	-	200	-

26 Aug, 2027

-
Included w.e.f. 24.12.2025

1629

ACE TEST HOUSE PRIVATE LIMITED (8161906), NEW DELHI

8161906

IS 13757 (1993)

Burnt Clay Fly Ash Building Bricks-specification

Class 3.5,5.0,7.5,10,12.5,15,17.5,20,25,30

4200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(GENERAL QUALITY)	-	200	-
6.1(Dimensions)	-	500	-
6.2(Tolerances)	-	200	-
7.1(Compressive Strength)	-	1000	-
7.2(Water Absorption)	-	1000	-
7.3(Efforescence)	-	1000	-
9(Marking)	-	300	-

26 Aug, 2027

-
Included w.e.f. 24.12.2025

1630

ARYAVRAT TEST HOUSE PRIVATE LIMITED

5191706

IS 1865 (1991)

Iron castings with spheroidal or nodular graphite - Specification (Third Revision)

All Type

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Grades)	-	1000	-
4.1(General requirements)	-	1000	-
5(Manufacture)	-	100	-
6(Workmanship and finish)	-	500	-
7(Heat treatment)	-	0	-
9(Micro structure)	-	10000	-
10.1(Separately-Cast Test Samples)	-	1000	-
10.2(Cast-on Test Samples)	-	1000	-
11.1(Batch)	-	0	-
11.2(Number of Tests per Batch)	-	0	-
12.1(Tensile Strength)	-	1000	-
12.2(Impact Test)	-	1000	-
13.1(Tensile Test)	-	1000	-
13.2(Hardness Test)	-	1000	-
13.3(Impact Test)	-	1000	-
14(Validity of tests)	-	0	-
15(Retest)	-	1000	-
16(Additional test)	-	1000	-
17(Marking)	-	0	-

28 Nov, 2028

-
included w.e.f 09.04.2026

1631

ARYAVRAT TEST HOUSE PRIVATE LIMITED

5191706

IS 318 (1981)

Specification for leaded tin bronze ingots and castings (Second Revision)

All Type

5600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(SIZE AND SHAPE)	-	500	-
6(FREEDOM FROM DEFECTS)	-	500	-
4, Table 2.(MECHANICAL PROPERTIES)	-	1000	-
3, Table 1.(CHEMlCAL COMPOSITION)	-	1000	-
7.2(Dimension)	-	500	-
7.1(Mass)	-	500	-
6.2(Freedom from defects-Castings)	-	500	-
6.1(Freedom from defects-Ingots)	-	500	-
4.1, Table 2(Elongation)	-	1000	-
4.1, Table 2(0.2% Proof stress)	-	1000	-
4.1, Table 2(Tensile strength)	-	1000	-
5(Pressure Test)	-	1000	-
8(Marking)	-	100	-
5(Pressure Test)	-	1000	-
8(Marking)	-	100	-
5(Pressure Test - IS 318)	-	1000	-
8(Marking)	-	100	-

28 Nov, 2028

-
included w.e.f 09.04.2026

1632

ARYAVRAT TEST HOUSE PRIVATE LIMITED

5191706

IS 14650 (2023)

UNALLOYED AND ALLOYED STEEL INGOT AND SEMI-FINISHED PRODUCTS FOR RE-ROLLING PURPOSES - SPECIFICATION (First Revision)

All Type

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause - 7.1(CARBON)	-	500	-
Clause - 7.1(SULPHUR)	-	500	-
Clause - 7.1(PHOSPHURS)	-	500	-
Clause - 7.1(MANGANESE)	-	500	-
Clause - 7.1(NITROGEN)	-	500	-
As per Clause 10(Dimension)	-	500	-
As per Clause 10.1(Dimension Width)	-	500	-
As per Clause 10.1(Dimension Thickness)	-	500	-
As per Clause 10.2(Dimension Length)	-	500	-
As per Clause 11/11.1/11.2/11.3/11.4(Tolerances)	-	100	-
As per Clause 11.5(Bend)	-	500	-
As per Clause 11.6(Camber)	-	500	-
As per Clause 11.7 (i)(Out of Square)	-	500	-
As per Clause 11.7 (ii)(Round Corners)	-	500	-
As per Clause 11.7 (iii)(Ridges due to gas cutting)	-	500	-
As per Clause 11.7 (iv)(Taper (Width variation on top and bottom surface at one location)	-	500	-
As per Clause 11.7 (v)(Edge slanting (Width variation on top and bottom surface at one location)	-	500	-
As per Clause 11.7 (vi)(Convexity(Difference in thickness from edge to curve)	-	500	-
As per Clause 11.7 (vii)(Chamfering (Length variation on top and bottom surface at one location)	-	500	-
As per Clause 11.7 (viii)(Wedge (Thickness variation at the edges along the cross section)	-	500	-
As per Clause 11.7 (ix)(Scarfing pits)	-	500	-
As per Clause 12/12.1/12.2/12.3(Freedom from defects)	-	100	-
Clause. 13(Macro examination test.)	-	1000	-
Clause. 13(Macro examination test.)	-	1000	-
Clause. 13(Sulphur print.)	-	1000	-
Clause. 13(Inclusion content)	-	1000	-
Clause. 14(Marking)	-	100	-
Clause.15(Ordering information)	-	0	-
Clause.6.0(Manufacture)	-	0	-
Clause.7.1(Silicon)	-	500	-
Clause.7.1(Carbon Equbalant)	-	500	-
Clause.7.1(Microalloy element)	-	500	-

28 Nov, 2028

-
included w.e.f 09.04.2026

1633

URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA

8168906

IS 302 : Part 2 : Sec 30 (2007)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 30 room heaters (First Revision)

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 (Classification)	-	500	50000/- Without EMI/EMC and 250000/- with EMI/EMC
Cl.6 (Classification)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Repeat Clause No. 6
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	1000	50000/- Without EMI/EMC and 250000/- with EMI/EMC
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Repeat Clause No. 7
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Repeat Clause No. 7
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Repeat Clause No. 7
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Repeat Clause No. 7
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Repeat Clause No. 7
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Repeat Clause No. 7
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Repeat Clause No. 7
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Repeat Clause No. 7
Cl.7(Marking and Instructions)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Repeat Clause No. 7
Cl.7(Marking and Instructions)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Repeat Clause No. 7
Cl.7(Marking and Instructions)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Repeat Clause No. 7
Cl.7.3(Marking and Instructions)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7
Cl.7.3(Marking and Instructions)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No.7
Cl.7.3(Marking and Instructions)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No.7
Cl.7.4(Marking and Instructions)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No.7
Cl.7.5(Marking and Instructions)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7
Cl.7.6 & IS:302-1:2008(Marking and Instructions)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7
Cl.7.8 of IS :302-1:2008(Marking and Instructions)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7
Cl.7.9 of IS :302-1:2008(Marking and Instructions)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7
Cl.7.10 of IS :302-1:2008(Marking and Instructions)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7
Cl.7.11 of IS :302-1:2008(Marking and Instructions)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7
Cl.7.12.1 & IS:302-1:2009(Marking and Instructions)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7
Cl.7.13 of IS 302-1:2008(Marking and Instructions)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7
Cl.7.14 of IS302-1:2008(Marking and Instructions)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7
Cl.7.14(Marking and Instructions)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7
Cl.7.14(Marking and Instructions)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7
Cl.7.101(Marking and Instructions)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7
Cl.8 & IS:302-1:2008(Protection Against Access to Live Parts)	-	2000	50000/- Without EMI/EMC and 250000/- with EMI/EMC
Cl.10 & IS:302-1:2008(Power Input and Current)	-	2000	50000/- Without EMI/EMC and 250000/- with EMI/EMC
Cl.11 & IS:302-1:2008(Heating)	-	3500	50000/- Without EMI/EMC and 250000/- with EMI/EMC
Cl.11 & IS:302-1:2008(Heating)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 11 and repeated clause
Cl.11 & IS:302-1:2008(Heating)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 11 and repeated clause
Cl.11 & IS:302-1:2008(Heating)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 11 and repeated clause
Cl.11 & IS:302-1:2008(Heating)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 11 and repeated clause
Cl.11 & IS:302-1:2008(Heating)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 11 and repeated clause
Cl.11 & IS:302-1:2008(Heating)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 11 and repeated clause
Cl.11 & IS:302-1:2008(Heating)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 11 and repeated clause
Cl.11 & IS:302-1:2008(Heating)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 11 and repeated clause
Cl.11 & IS:302-1:2008(Heating)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 11 and repeated clause
Cl.11 & IS:302-1:2008(Heating)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 11 and repeated clause
Cl.11 & IS:302-1:2008(Heating)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 11 and repeated clause
Cl.11 & IS:302-1:2008(Heating)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 11 and repeated clause
Cl.11 & IS:302-1:2008(Heating)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 11 and repeated clause
Cl.11 & IS:302-1:2008(Heating)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 11 and repeated clause
Cl.11 & IS:302-1:2008(Heating)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 11 and repeated clause
Cl.11.8(Heating)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 11
Cl.11.8(Heating)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 11 and repeated clause
Cl.11.8(Heating)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 11 and repeated clause
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	1500	50000/- Without EMI/EMC and 250000/- with EMI/EMC
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 13 and repeated clause
Cl.14 & IS:302-1:2008(Transient Over Voltages)	-	3000	50000/- Without EMI/EMC and 250000/- with EMI/EMC
Cl.15 & IS: 302-1:2008(Moisture Resistance )	-	5500	50000/- Without EMI/EMC and 250000/- with EMI/EMC
Cl.15.3 of IS 302-1:200(Moisture Resistance )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 15
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	1500	50000/- Without EMI/EMC and 250000/- with EMI/EMC
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 16 and repeated clause
Cl.17 & IS:302-1:2008(Over load Protection of Transformers and Associated Circuits )	-	2000	50000/- Without EMI/EMC and 250000/- with EMI/EMC
Cl.18 (Endurance. )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	4000	50000/- Without EMI/EMC and 250000/- with EMI/EMC
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 19 and repeated clause
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 19 and repeated clause
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 19 and repeated clause
Cl.19.101(Abnormal Operation.)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 19
Cl.19.102(Abnormal Operation.)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 19
Cl.19.103(Abnormal Operation.)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 19
Cl.19.104(Abnormal Operation.)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 19
Cl.19.105(Abnormal Operation.)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 19
Cl.19.106(Abnormal Operation.)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 19
Table 8 of IS 302-1:2008(Abnormal Operation.)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 19
Cl.19.107(Abnormal Operation.)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 19
Cl.19.108(Abnormal Operation.)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 19
Cl.19.109(Abnormal Operation.)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 19
Cl.19.110(Abnormal Operation.)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 19
Cl.19.111(Abnormal Operation.)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 19
Cl.19.112(Abnormal Operation.)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 19
Cl.19.113(Abnormal Operation.)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 19
Cl.19.114(Abnormal Operation.)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 19
Cl.20 & IS:302-1:2008(Stability & Mechanical Hazards)	-	1500	50000/- Without EMI/EMC and 250000/- with EMI/EMC
Cl.21 & IS:302-1:2008)(Mechanical Strength.)	-	2000	50000/- Without EMI/EMC and 250000/- with EMI/EMC
Cl.21.2 of IS 302-1:2008(Mechanical Strength.)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 21
Cl.21.101 (Mechanical Strength.)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 21
Cl.21.102(Mechanical Strength.)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 21
Cl.21.103(Mechanical Strength.)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 21
Cl.22.1 of IS 302-1:2008(Construction)	-	2500	50000/- Without EMI/EMC and 250000/- with EMI/EMC
Cl.22.5 of IS 302-1:2008(Construction)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 22.1
Cl.22.6 of IS 302-1:2008(Construction)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 22.1
Cl.22.7 of IS 302-1:2008(Construction)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 22.1
Cl.22.8 of IS 302-1:2008(Construction)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 22.1
Cl.22.9 of IS 302-1:2008(Construction)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 22.1
Cl.22.11(Construction)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 22.1
Cl.22.12 of IS 302-1:2008(Construction)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 22.1
Cl.22.13 of IS 302-1:2008(Construction)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 22.1
Cl.22.14 of IS 302-1:2008(Construction)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 22.1
Cl.22.15 of IS 302-1:2008(Construction)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 22.1
Cl.22.18 of IS 302-1:2008(Construction)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 22.1
Cl.22.20 of IS 302-1:2008(Construction)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 22.1
Cl.22.21 of IS 302-1:2008(Construction)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 22.1
Cl.23 & IS:302-1:2008(Internal Wiring )	-	2000	50000/- Without EMI/EMC and 250000/- with EMI/EMC
Cl.23.4 & Cl.29 of 302-1:2008(Internal Wiring )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 23
Cl.23.5 of 302-1:2008(Internal Wiring )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 23
Cl.23.7 of 302-1:2008(Internal Wiring )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 23
C.23.7 of 302-1:2008(Internal Wiring )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 23
Cl.24.1 of 302-1:2008(Component)	-	2500	50000/- Without EMI/EMC and 250000/- with EMI/EMC
Cl.24.1 of 302-1:2008(Component)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 24.1 and repeated Clause
Cl.24.1.3 (Component)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 24.1
Cl.24.1.3 (Component)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 24.1 and repeated Clause
Cl.24.1.3 (Component)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 24.1 and repeated Clause
Cl.24.1.3 (Component)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 24.1 and repeated Clause
C.24.1.4(Component)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 24.1
C.24.2 of 302-1:2008(Component)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 24.1
Cl.24.10(Component)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 24.1
Cl.25.1 of 302-1:2008(Supply Connection and External Flexible Cords )	-	2500	50000/- Without EMI/EMC and 250000/- with EMI/EMC
Cl. 25.2 of IS 3021:2008(Supply Connection and External Flexible Cords )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 25.1
Cl. 25.3 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 25.1
Cl. 25.4 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 25.1
Cl.25.5 of 302-1:2008(Supply Connection and External Flexible Cords )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 25.1
Cl.25.6 of 302-1:2008(Supply Connection and External Flexible Cords )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 25.1
Cl.25.7.(Supply Connection and External Flexible Cords )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 25.1
Cl.25.8(Supply Connection and External Flexible Cords )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 25.1
Cl. 25.9(Supply Connection and External Flexible Cords )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 25.1
Cl.25.10 of 302-1:2008(Supply Connection and External Flexible Cords )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 25.1
Cl. 25.11(Supply Connection and External Flexible Cords )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 25.1
Cl. 25.12(Supply Connection and External Flexible Cords )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 25.1
Cl. 25.13(Supply Connection and External Flexible Cords )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 25.1
Cl.25.14 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 25.1
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 25.1
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 25.1 and repeated clause
Cl.25.17 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 25.1
Cl.25.18(Supply Connection and External Flexible Cords )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 25.1
Cl.25.20(Supply Connection and External Flexible Cords )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 25.1
Cl.26.1 of IS 302-1:2008(Terminal for External Conductors )	-	2000	50000/- Without EMI/EMC and 250000/- with EMI/EMC
Cl.26.10 of IS 302-1:2008(Terminal for External Conductors )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 26.1
Cl.26.11 of IS 302-1:2008(Terminal for External Conductors )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 26.1
Cl.27.1 of 302-1:2008(Provision for Earthing.)	-	1500	50000/- Without EMI/EMC and 250000/- with EMI/EMC
Cl.27.5 of 302-1:2008(Provision for Earthing.)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 27.1
Cl.28 of 302-1:2008(Screws and Connections.)	-	1000	50000/- Without EMI/EMC and 250000/- with EMI/EMC
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	2000	50000/- Without EMI/EMC and 250000/- with EMI/EMC
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 29 and repeated clause
Cl.30 & IS:302-1:2008(Resistance to Heat and Fire)	-	2000	50000/- Without EMI/EMC and 250000/- with EMI/EMC
Cl.30.2.2 of 302-1:2008(Resistance to Heat and Fire)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 30
Cl.31 & IS:302-1:2008(Resistance to Rusting.)	-	1000	50000/- Without EMI/EMC and 250000/- with EMI/EMC
Cl.32 & IS:302-1:2008(Radition,Toxicity and similar Hazards.)	-	1000	50000/- Without EMI/EMC and 250000/- with EMI/EMC
Cl.31 of IS:302-1:2008(Resistance to Rusting.)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 31 and repeated clause
Cl.30.2 of 302-1:2008(Resistance to Heat and Fire : Resistance to fire)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 30
Cl.30.1 of IS:302-1:2008(Resistance to Heat and Fire: Resistance to heat. )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 30
Cl.29.2 of IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation : Creepage Distance)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 29
Cl.29.1 of IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation : Clearance )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 29
Cl.28 of 302-1:2008(Screws and Connections.)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 28 and repeated clause
Cl.27.5 of 302-1:2008(Provision for Earthing : ECR)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 27
Cl.27.1 of 302-1:2008(Provision for Earthing )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 27
Cl.26 of IS 302-1:2008(Terminal for External Conductors )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 26 and repeated Clause
Cl.25.20 of 302-1:2008(Supply Connection and External Flexible Cords : Additional insulation )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 25
Cl.25.18 of 302-1:2008(Supply Connection and External Flexible Cords : Arrangement of cord anchorages )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 25
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords : Cord grip test - displacement)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 25
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords : Cord grip test - strain at terminals )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 25 and repeated clause
Cl. 25.13 of 302-1:2008(Supply Connection and External Flexible Cords : Inlet opening of supply cords )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 25
Cl. 25.12 of 302-1:2008(Supply Connection and External Flexible Cords : Moulding of cords )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 25
Cl.25.10 of 302-1:2008(Supply Connection and External Flexible Cords : Colour of earthing wire )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 25
Cl. 25.9 of 302-1:2008(Supply Connection and External Flexible Cords : Contact with sharp edge )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 25
Cl.25.8 of 302-1:2008(Supply Connection and External Flexible Cords : Resistance of supply wires )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 25
Cl.25.7 of IS:302-2-30:2007(Supply Connection and External Flexible Cords : Supply cords material )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 25
Cl.25.5 of 302-1:2008(Supply Connection and External Flexible Cords : Type of attachments )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 25
Cl.25.1 of 302-1:2008(Supply Connection and External Flexible Cords : Means of connection )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 25
Cl.24 of IS:302-2-30:2007(Component)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 24 .1
Cl.23.7 of 302-1:2008(Internal Wiring : Colour of earting conductor )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 23
Cl.23 of IS:302-1:2008(Internal Wiring )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 23 and repeated clause
Cl.22.106 of IS:302-2-30:2007(Construction : Checking of thermostats, timers or similar means for visibl glowing radiant heaters)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 22.1
Cl.22.106 of IS:302-2-30:2007(Construction : Checking of openings on the underside)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 22.1 and repeated clause
Cl.22.102 & Cl 22.103 of IS:302-2-30:2007(Construction : Fireguard )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 22.1
Cl.22.101 of IS:302-2-30:2007(Construction : Prevention to contact with heating element)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 22.1
Cl.22.24 of IS:302-2-30:2007(Construction : test of bare heating element)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 22.1
Cl.22.18 of IS 302-1:2008(Construction : Resistance to corrosion )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 22.1
Cl.22.15 of IS 302-1:2008(Construction : Storage hooks for flexible cords)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 22.1
Cl.22.14 of IS 302-1:2008(Construction : ragged and sharp edges)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 22.1
Cl.22.13 of IS 302-1:2008(Construction : Position of handles )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 22.1
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knobs,grips,lever and similer parts )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 22.1
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable parts )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 22.1
Cl.22.7 of IS:302-2-30:2007(Construction : Pressure test of oil heater )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 22.1
Cl.21.101 of IS:302-2-30:2007(Mechanical Strength : fire gaurd deformation test )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 21
Cl.21.2 of IS 302-1:2008(Mechanical Strength : Pentration by sharp implementation )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 21
Cl.21.1 of IS:302-1:2008)(Mechanical Strength : Rough handling )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 21
Cl.20 of IS:302-2-30:2007(Stability of Mechanical Hazards)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 20
Cl.19.114 of IS:302-2-30:2007(Abnormal Operation : the temp. of the surface of the container for oil heaters )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 19
Cl.19.112 of IS:302-2-30:2007(Abnormal Operation : Ignition of bleached cotton gauge)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 19
Cl.19.111 of IS:302-2-30:2007(Abnormal Operation : Ignition of flannelette for Visibly glowing heaters)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 19
Cl.19.110 of IS:302-2-30:2007(Abnormal Operation : operation against wall for visibly glowing radiant heaters )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 19
Cl.19.109 of IS:302-2-30:2007(Abnormal Operation : operation against wall for fan heater )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 19
Cl.19.106 of IS:302-2-30:2007(Abnormal Operation : Locked rotor of fan hetear )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 19
Cl.19.103 , Cl 19.104 of IS:302-2-30:2007(Abnormal Operation : Operation after Covering by cotton)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 19 and repeated clause
Cl.19 of IS:302-2-30:2007(Abnormal Operation : High Voltage )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 19 and repeated clause
Cl.19 of IS:302-2-30:2007(Abnormal Operation : temp rise of supply cord )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 19 and repeated clause
Cl.19 of IS:302-2-30:2007(Abnormal Operation : Temp rise of test corner )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 19 and repeated clause
Cl.19 of IS:302-1:2008(Abnormal Operation : Emission of molten or poisonous or ignitable gas)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 19 and repeated clause
Cl.16 of IS:302-1:2008(Leakage current and Electric strength (After humidity): Electric Strentgh )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 16 and repeated clause
Cl.16 of IS:302-1:2008(Leakage current and Electric strength (After humidity): Leakage current )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 16 and repeated clause
Cl.15 of IS 302-1:2008(Moisture Resistance )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 15 and repeated clause
Cl.14 of IS:302-1:2008(Transient Over Voltages)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 14 and repeated clause
Cl.13 of IS:302-1:2008(Leakage Current of Electric Strength at operating temp. )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 13 and repeated clause
Cl.13 of IS:302-1:2008(Leakage Current of Electric Strength at operating temp. )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 13 and repeated clause
Cl.11 of IS:302-2:30: 2007(Heating : Room temperature)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 11 and repeated clause
Cl.11.8 of IS:302-2:30: 2007(Heating : For liquid filled radiators the temp. rise of the outer surface of the liquid container)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 11
Cl.11 of IS:302-2:30: 2007(Heating : Temperature rise in winding)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 11 and repeated clause
Cl.11 of IS:302-2:30: 2007(Heating : Air-outlet grills)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 11 and repeated clause
Cl.11 of IS:302-2:30: 2007(Heating : Surfaces of handles, knobs, grips and similar parts)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 11 and repeated clause
Cl.11 of IS:302-2:30: 2007(Heating : Wooden supports, walls, ceiling and floor of the test corner)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 11 and repeated clause
Cl.11 of IS:302-2:30: 2007(Heating : PVC Insulation )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 11 and repeated clause
Cl.10 of IS:302-1:2008(Power Input and Current)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 10 and repeated clause
Cl.8 of IS:302-1:2008(Protection Against Access to Live Parts)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 8 and repeated clause
Cl.7.101 of IS:302-2:30: 2007(Marking and Instructions : standard mark. )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7
Cl.7.15 of IS 302-1:2008(Marking and Instructions : Visibility of marking concerning covering)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7
Cl.7.15 of IS 302-1:2008(Marking and Instructions : discernibility from the out side )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7
Cl.7.14 of IS:302-2:30: 2007(Marking and Instructions : Height of “Do not cover”)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7
Cl.7.14 of IS:302-2:30: 2007(Marking and Instructions : height of symbol)	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7 and repeated clause
Cl.7.14 of IS302-1:2008(Marking and Instructions : Legibility and durability )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7 and repeated clause
Cl.7.13 of IS 302-1:2008(Marking and Instructions : Languge of instruction and texts )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7
Cl.7.11 of IS :302-1:2008(Marking and Instructions : Controls )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7
Cl.7.9 of IS :302-1:2008(Marking and Instructions : switches )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7
Cl.7.8 of IS :302-1:2008(Marking and Instructions : terminals )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7
Cl.7.6 of IS:302-1:2008(Marking and Instructions : Symbols )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7
Cl.7.5 of IS:302-1:2008(Marking and Instructions : upper of lower limit of the rated power input )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7
Cl 7.1 & Cl.7.6 of IS:302-2:30: 2007(Marking and Instructions : Do not cover )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Country of manufacture )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7 and repeated clause
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Symbol for Class-II )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7 and repeated clause
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Model or type )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7 and repeated clause
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Name , trade-mark or identification mark of the manufacturer )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7 and repeated clause
Cl.7.1 of IS:302-1:2008(Marking and Instructions : rated power input )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7 and repeated clause
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Nature of supply )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7 and repeated clause
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Rated Voltage )	-	0	50000/- Without EMI/EMC and 250000/- with EMI/EMC Refer to the Clause No. 7 and repeated clause
19.11.4.1(Electrostatic discharges)	-	25000	50000/- Without EMI/EMC and 250000/- with EMI/EMC
19.11.4.2(Radiated fields)	-	45000	50000/- Without EMI/EMC and 250000/- with EMI/EMC
19.11.4.3(Fast transient bursts)	-	25000	50000/- Without EMI/EMC and 250000/- with EMI/EMC
19.11.4.4(Surge immunity test)	-	25000	50000/- Without EMI/EMC and 250000/- with EMI/EMC
19.11.4.5(Injected currents)	-	30000	50000/- Without EMI/EMC and 250000/- with EMI/EMC
19.11.4.6(Class 3 Voltage dips and interruptions)	-	25000	50000/- Without EMI/EMC and 250000/- with EMI/EMC
19.11.4.7(Harmonics)	-	25000	50000/- Without EMI/EMC and 250000/- with EMI/EMC

-
Included w.e.f 27.01.2026

1634

Indian oil corporation ltd (IOCL) Agra Terminal laboratory

9195114

IS 15607 (2022)

Biodiesel B-100 - Fatty Acid Methyl Esters FAME Specification Second Revision

18940 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3(The materials shall be free from grit)	-	200	OK
4.4-Table 1-i)(Appearance, visual)	-	200	OK
4.4-Table 1-ii)(Colour, visual)	-	200	OK
4.4-Table 1-iii)(Density at 15 °C, kg/m3)	-	1130	OK
4.4-Table 1-iv)(Kinematic viscosity at 40 °C, cSt)	-	2270	OK
4.4-Table 1-v)(Flash point (PMCC)1) °C, Min)	-	1900	OK
4.4-Table 1-vi)(Total Sulphur, mg/kg, Max)	-	4710	OK
4.4-Table 1-ix)(Water content mg/kg, Max)	-	4160	OK
4.4-Table 1-xiii)(Acid value, mg KOH/g, Max)	-	2270	OK
4.4-Table 1-xxvi)(Cold filter plugging point (CFPP), °C Max a) summer 18 – Part 110 b) winter3))	-	1900	OK

26 Dec, 2028

-
4.1 (General) 4.2 (Additives) 4.4-Table 1-vii) (Carbon residue (MCR) 2) percent by mass, Max) 4.4-Table 1-viii) (Sulfated ash, percent by mass, Max) 4.4-Table 1-x) (Total contamination, mg/kg, Max) 4.4-Table 1-xi) (Copper strip corrosion, 3 h at 50 °C, Max) 4.4-Table 1-xii) (Cetane No., Min) 4.4-Table 1-xiv) (Methanol, percent by mass, Max) 4.4-Table 1-xix) (Free Glycerol percent by mass, Max) 4.4-Table 1-xv) (Ester content, percent by mass, Min) 4.4-Table 1-xvi) (Monoglycerides content, percent by mass, Max) 4.4-Table 1-xvii) (Diglyceride content, percent by mass, Max) 4.4-Table 1-xviii) (Triglyceride content, percent by mass, Max) 4.4-Table 1-xx) (Total Glycerol percent by mass, Max) 4.4-Table 1-xxi) (Phosphorous mg/kg, Max) 4.4-Table 1-xxii) (Sodium + Potassium mg/kg, Max) 4.4-Table 1-xxiii) (Calcium + Magnesium mg/kg, Max) 4.4-Table 1-xxiv) (Iodine value, gm iodine/100 gm, Max) 4.4-Table 1-xxv) (Oxidation stability, at 110 °C, Min hrs. Accelerated) 4.4-Table 1-xxvii) (Linolenic acid methyl ester, percent m/m, Max) 4.4-Table 1-xxviii) (Polyunsaturated (>_ 4 double bonds) methyl ester percent m/m, Max) 5.1 (Packing) 5.2 (Marking)

1635

ACE TEST HOUSE PRIVATE LIMITED (8161906), NEW DELHI

8161906

IS 12894 (2002)

Pulverized fuel ash - Lime bricks - Specification

Group I,II,III, Class-3.5,5,7.5,10,12.5,15,17.5,20,25,30

6300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General Requirements)	-	100	-
3.2(General Requirements)	-	100	-
3.3(General Requirements)	-	100	-
3.4(General Requirements)	-	100	-
3.5(General Requirements)	-	100	-
5.1(Dimensions)	-	800	-
7.1, Table -1(Average Wet Compressive Strength)	-	1000	-
7.2(Drying Shrinkage)	-	1500	-
7.3(Efflorescence Test)	-	1500	-
7.4(Water Absorption)	-	500	-
5.2(Tolerance)	-	300	-
9(Marking)	-	200	-
6(Materials)	-	0	-
3.1(General Requirements)	-	0	-
3.2(General Requirements)	-	0	-
3.3(General Requirements)	-	0	-
3.4(General Requirements)	-	0	-
3.5(General Requirements)	-	0	-
5.1(Dimensions)	-	0	-
7.1, Table -1(Average Wet Compressive Strength)	-	0	-
7.2(Drying Shrinkage)	-	0	-
7.3(Efflorescence Test)	-	0	-
7.4(Water Absorption)	-	0	-
5.2(Tolerance)	-	0	-
9(Marking)	-	0	-
6(Materials)	-	0	-

26 Aug, 2027

-
Included w.e.f. 24.12.2025

1636

Matrix Test Labs

8138626

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12(Charging of metal-ion batteries)	-	500	-
6(Classification- IS 302-1)	-	100	-
5(General conditions for the tests)	-	100	-
11.8(Temperature rise)	-	500	-
11.6(Combined appliances)	-	500	-
11.5(Motor-operated appliances)	-	500	-
11.4(Heating appliances)	-	500	-
8.1.5(Live parts of built-in appliances)	-	500	-
17(Overload protection of transformers and associated circuits)	-	500	-
16(Leakage current and electric strength)	-	500	-
4(General requirement)	-	100	-
32.1(Radiation Toxicity and Similar Hazards)	-	500	-
31(Resistance to Rusting)	-	500	-
30.2(Needle Flame Test)	-	500	-
30.2(Glow Wire Test)	-	500	-
30.1(Ball pressure test)	-	500	-
29(clearance, creepage distances and solid insulation)	-	500	-
28(Screw test and connections)	-	500	-
26(Terminals for external conductors)	-	500	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
23.1(Internal Wiring, IS 302-1)	-	500	-
22.1(Construction, IS 302-1)	-	500	-
21.1(Mechanical Strength, IS 302-1)	-	500	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	500	-
19(Abnormal Operation)	-	1500	-
18(Endurance)	-	0	-
17(Over Load Protection of Transformers and associated circuits)	-	500	-
16.3(Electric Strength (after clause 15 and 16.2))	-	500	-
16.2(Leakage Current (after Clause 15))	-	500	-
16.1(General)	-	500	-
16.0(General)	-	1500	-
15.3(Humidity Test)	-	500	-
15.2(Spillage Test)	-	500	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	500	-
15.0(Moisture resistance)	-	1500	-
14(Transient Over Voltages)	-	500	-
13.3(Electric Strength at operating temperature)	-	500	-
13.2(Leakage current at operating temperature)	-	500	-
13(Leakage current and electric strength at operating temperature)	-	1000	-
11.3(Heating)	-	500	-
11.2(General)	-	500	-
11.1(General)	-	500	-
10.2(Current input)	-	500	-
10.1(Power input)	-	500	-
9(Starting of motor operation test requirements and tests)	-	0	-
8.1.4(Protection against live parts against protective impedance)	-	500	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	500	-
8.1.2(Protection against live parts in openings)	-	500	-
8.1.1(Protection against live parts in all positions)	-	500	-
7(Marking and instructions)	-	500	-
A.2(Earth continuity test)	-	1000	-
Annex C(Ageing test on motors)	-	500	-
Annex D(Thermal motor protectors)	-	500	-
15.2(Moisture resistance)	-	500	-
19.17(Abnormal Operation, IS 302-1)	-	500	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	500	-
21.2(Mechanical Strength, IS 302-1)	-	500	-
21.3(Mechanical Strength, IS 302-1)	-	500	-
22.5(Construction)	-	500	-
22.6(Construction, IS 302-1)	-	500	-
22.11(Construction, IS 302-1)	-	500	-
22.16(Construction)	-	500	-
22.32(Construction, IS 302-1)	-	500	-
22.42(Construction)	-	500	-
23.3(Internal Wiring, IS 302-1)	-	500	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	500	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
26.5(Terminals for external conductors)	-	500	-
27.5(Provision for Earthing, IS 302-1)	-	500	-
28.1(Screws and connections)	-	500	-
22.2(Construction, IS 302-1)	-	500	-
22.3(Construction, IS 302-1)	-	500	-
B.22.4(Construction, IS 302-1)	-	500	-
B.22.5(Construction, IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.3(Marking- IS 302-1)	-	100	-
7.4(Marking- IS 302-1)	-	100	-
7.5(Marking- IS 302-1)	-	100	-
7.6(Marking- IS 302-1)	-	100	-
7.7(Marking- IS 302-1)	-	100	-
7.8(Marking- IS 302-1)	-	100	-
7.9(Marking- IS 302-1)	-	100	-
7.1O(Marking- IS 302-1)	-	100	-
7.11(Marking- IS 302-1)	-	100	-
7.12(Marking- IS 302-2-15)	-	100	-
7.13(Marking- IS 302-1)	-	100	-
6(Classification- IS 302-1)	-	100	-
7.15(Marking- IS 302-1)	-	100	-
11(Heating, IS 302-1, Table -3)	-	500	-
11(Heating, IS 302-1, Table -3)	-	500	-
11(Heating, IS 302-1, Table -3)	-	500	-
11(Heating, IS 302-1, Table -3)	-	500	-
11(Heating, IS 302-1, Table -3)	-	500	-
11(Heating, IS 302-1, Table -3)	-	500	-
11(Heating, IS 302-1)	-	500	-
19.7(Abnormal Operation, IS 302-1)	-	500	-
19.8(Abnormal Operation, IS 302-1)	-	500	-
19.9(Abnormal Operation, IS 302-1)	-	500	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	500	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	500	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	500	-
19.17(Abnormal Operation, IS 302-1)	-	500	-
22.7(Construction, IS 302-1)	-	500	-
22.9(Construction, IS 302-1)	-	500	-
22.10(Construction, IS 302-1)	-	500	-
22.12(Construction, IS 302-1)	-	500	-
22.14(Construction, IS 302-1)	-	500	-
22.15(Construction, IS 302-1)	-	500	-
22.18(Construction, IS 302-1)	-	500	-
22.19(Construction, IS 302-1)	-	500	-
22.21(Construction, IS 302-1)	-	500	-
22.22(Construction, IS 302-1)	-	500	-
22.24(Construction, IS 302-1)	-	500	-
22.25(Construction, IS 302-1)	-	500	-
22.28(Construction, IS 302-1)	-	500	-
22.31(Construction, IS 302-1)	-	500	-
22.34(Construction, IS 302-1)	-	500	-
22.35(Construction, IS 302-1)	-	500	-
22.36(Construction, IS 302-1)	-	500	-
22.37(Construction, IS 302-1)	-	500	-
22.38(Construction, IS 302-1)	-	500	-
22.40(Construction, IS 302-1)	-	500	-
22.41(Construction, IS 302-1)	-	500	-
22.43(Construction, IS 302-1)	-	500	-
22.43(Construction, IS 302-1)	-	500	-
22.44(Construction, IS 302-1)	-	500	-
22.49(Construction, IS 302-1)	-	500	-
22.54(Construction, IS 302-1)	-	500	-
22.55(Construction, IS 302-1)	-	500	-
22.58(Construction, IS 302-1)	-	500	-
22.59(Construction, IS 302-1)	-	500	-
22.60(Construction, IS 302-1)	-	500	-
22.61(Construction, IS 302-1)	-	500	-
23.2(Internal Wiring, IS 302-1)	-	500	-
23.4(Internal Wiring, IS 302-1)	-	500	-
23.6(Internal Wiring, IS 302-1)	-	500	-
23.7(Internal Wiring, IS 302-1)	-	500	-
23.8(Internal Wiring, IS 302-1)	-	500	-
23.9(Internal Wiring, IS 302-1)	-	500	-
23.10(Internal Wiring, IS 302-1)	-	500	-
25.1(Supply connection and external flexible cords, IS 302-1)	-	500	-
25.2(Supply connection and external flexible cords, IS 302-1)	-	500	-
25.3(Supply connection and external flexible cords, IS 302-1)	-	500	-
25.4(Supply connection and external flexible cords, IS 302-1)	-	500	-
25.5(Supply connection and external flexible cords, IS 302-1)	-	500	-
25.9(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.10(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.20(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.23(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.24(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
27.2(Provision for Earthing, IS 302-1)	-	500	-
27.3(Provision for Earthing, IS 302-1)	-	500	-
27.4(Provision for Earthing, IS 302-1)	-	500	-
27.6(Provision for Earthing, IS 302-1)	-	500	-
32.1(Radiation, toxicity and similar hazards, is 302-1)	-	500	-
32.2(Radiation, toxicity and similar hazards, is 302-1)	-	500	-
11.7(Duration corresponding)	-	500	-
18(Endurance)	-	0	-
27.1(Provision for Earthing, IS 302-1)	-	500	-

31 Dec, 2026

-
Included w.e.f 30.01.2026 Exclusion: Cl.19.11.4.1-Cl.19.11.4.7(EMI/EMC). Cl 24 (Components)

1637

ARYAVRAT TEST HOUSE PRIVATE LIMITED

5191706

IS 10748 (2004)

Hot - Rolled steel strip for welded tubes and pipes - Specification (Second Revision)

All Type

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8 & Table 3(UTM)	-	1000	-
Cl 9(Press)	-	1000	-
Cl 11(Workmanship)	-	100	-
Cl 12 & 13(Length, Width & Thickness)	-	100	-
Cl 8 & Table 3(UTM)	-	1000	-
Cl 9(Press)	-	1000	-
Cl 11(Workmanship)	-	100	-
Cl 12 & 13(Length, Width & Thickness)	-	500	-
Cl 8 & Table 3(UTM)	-	1000	-
Cl 9(Press)	-	1000	-
Cl 11(Workmanship)	-	100	-
Cl 12 & 13(Length, Width & Thickness)	-	500	-
7.1(Carbon %)	-	500	-
7.1(Manganese %)	-	500	-
7.1(Phosphorus %)	-	500	-
7.1(Sulphur %)	-	500	-
7.1(Silicon %)	-	500	-
7.1( Copper %)	-	500	-
7.1( Aluminium %)	-	500	-
7.1( Nb)	-	500	-
7.1(V)	-	500	-
7.1( Ti)	-	500	-
7.1(Cr)	-	500	-
7.1(Mo)	-	500	-
7.1(Ni)	-	500	-
7.1( Nitrogen%)	-	500	-
7.1(CE)	-	500	-
7.1(Carbon %)	-	500	-
7.1(Manganese %)	-	500	-
7.1(Phosphorus %)	-	500	-
7.1(Sulphur %)	-	500	-
7.1(Silicon %)	-	500	-
7.1( Copper %)	-	500	-
7.1( Aluminium %)	-	500	-
7.1( Nb)	-	500	-
7.1(V)	-	500	-
7.1( Ti)	-	500	-
7.1(Cr)	-	500	-
7.1(Mo)	-	500	-
7.1(Ni)	-	500	-
7.1( Nitrogen%)	-	500	-
7.1(CE)	-	500	-
7.1(Carbon %)	-	500	-
7.1(Manganese %)	-	500	-
7.1(Phosphorus %)	-	500	-
7.1(Sulphur %)	-	500	-
7.1(Silicon %)	-	500	-
7.1( Copper %)	-	500	-
7.1( Aluminium %)	-	500	-
7.1( Nb)	-	500	-
7.1(V)	-	500	-
7.1( Ti)	-	500	-
7.1(Cr)	-	500	-
7.1(Mo)	-	500	-
7.1(Ni)	-	500	-
7.1( Nitrogen%)	-	500	-
7.1(CE)	-	500	-
Table 1 ( Clauses 7.1 ,7.2 )(TITANIUM)	-	500	-
Table 1 ( Clauses 7.1 ,7.2 )(VANADIUM)	-	500	-
Table 1 ( Clauses 7.1 ,7.2 )(NIOBIUM)	-	500	-
Table 1 ( Clauses 7.1 ,7.2 )(CARBON EQUIVELENT )	-	500	-
Table 1 ( Clauses 7.1 ,7.2 )(Molybdenum)	-	500	-
Table 1 ( Clauses 7.1 ,7.2 )(Chromium)	-	500	-
Table 1 ( Clauses 7.1 ,7.2 )(Nickel)	-	500	-
Table 1 ( Clauses 7.1 ,7.2 )( ALUMINIUM)	-	500	-
Table 1 ( Clauses 7.1 ,7.2 )(SILICON)	-	500	-
Table 1 ( Clauses 7.1 ,7.2 )(NITROGEN)	-	500	-
Table 1 ( Clauses 7.1 ,7.2 )(MANGANESE)	-	500	-
Table 1 ( Clauses 7.1 ,7.2 )(PHOSPHURS)	-	500	-
Table 1 ( Clauses 7.1 ,7.2 )(SULPHUR)	-	500	-
Table 1 ( Clauses 7.1 ,7.2 )( CARBON)	-	500	-
Cl. 14(Weight)	-	500	-
Cl. 12, 13(Camber)	-	500	-
Cl. 12, 13(Thickness)	-	500	-
Cl. 8, Table 3(Elongation)	-	1000	-
Cl. 8, Table 3(Yield Stress)	-	1000	-
Cl 12 & 13(Length, Width & Thickness)	-	500	-
Cl 11(Workmanship)	-	100	-
Cl 9(Press)	-	1000	-
Cl 8 & Table 3(UTM)	-	1000	-
Cl 8 & Table 3(UTM)	-	1000	-
Cl 9(Press)	-	1000	-
Cl 11(Workmanship)	-	100	-
Cl 12 & 13(Length, Width & Thickness)	-	500	-
7.0 (7)(Micro Alloying elements - IS:8811)	-	500	-
8.0 (1)(Tensile Strength-IS:1608(P1))	-	1000	-
8.0 (2)(Yield Strength-IS:1608(P1))	-	1000	-
8.0 (3)(Elongation on 5.65 SoA GL-IS:1608(P1))	-	1000	-
12 (1)(Width - SOP MT-23)	-	500	-
12 (2)(Thickness- SOP MT-23)	-	500	-
12 (3)(Mass of Strip- SOP MT-23)	-	500	-
15.0 & 15.1(Coil edges - IS:10748)	-	500	-
15.0 & 15.2(Surface finish - IS:10748)	-	100	-
15.0 & 15.5(Telescopicity - IS:10748)	-	100	-
15(Condition of Coil)	-	100	-
16(Marking)	-	100	-
3.4(Vehicle Fuel System)	-	0	-
9(Protective Treatment)	-	0	-
Table 1 ( Clauses 7.1 ,7.2 )(Tungsten (W))	-	500	-
Table 1 ( Clauses 7.1 ,7.2 )(Boron (B))	-	500	-
CL 12(Average Width (04))	-	500	-
CL 12(Average Thickness (08))	-	500	-
Cl 8 & Table 3(UTM)	-	1000	-
Cl 9(Press)	-	1000	-
Cl 11(Workmanship)	-	100	-
Cl 12 & 13(Length, Width & Thickness)	-	500	-
Cl 8 & Table 3(UTM)	-	1000	-
Cl 9(Press)	-	1000	-
Cl 11(Workmanship)	-	100	-
Cl 12 & 13(Length, Width & Thickness)	-	500	-
Cl 8 & Table 3(UTM)	-	1000	-
Cl 9(Press)	-	1000	-
Cl 11(Workmanship)	-	100	-
Cl 12 & 13(Length, Width & Thickness)	-	500	-
7.1(Carbon %)	-	500	-
7.1(Manganese %)	-	500	-
7.1(Phosphorus %)	-	500	-
7.1(Sulphur %)	-	500	-
7.1(Silicon %)	-	500	-
7.1( Copper %)	-	500	-
7.1( Aluminium %)	-	500	-
7.1( Nb)	-	500	-
7.1(V)	-	500	-
7.1( Ti)	-	500	-
7.1(Cr)	-	500	-
7.1(Mo)	-	500	-
7.1(Ni)	-	500	-
7.1( Nitrogen%)	-	500	-
7.1(CE)	-	500	-
7.1(Carbon %)	-	500	-
7.1(Manganese %)	-	500	-
7.1(Phosphorus %)	-	500	-
7.1(Sulphur %)	-	500	-
7.1(Silicon %)	-	500	-
7.1( Copper %)	-	500	-
7.1( Aluminium %)	-	500	-
7.1( Nb)	-	500	-
7.1(V)	-	500	-
7.1( Ti)	-	500	-
7.1(Cr)	-	500	-
7.1(Mo)	-	500	-
7.1(Ni)	-	500	-
7.1( Nitrogen%)	-	500	-
7.1(CE)	-	500	-
7.1(Carbon %)	-	500	-
7.1(Manganese %)	-	500	-
7.1(Phosphorus %)	-	500	-
7.1(Sulphur %)	-	500	-
7.1(Silicon %)	-	500	-
7.1( Copper %)	-	500	-
7.1( Aluminium %)	-	500	-
7.1( Nb)	-	500	-
7.1(V)	-	500	-
7.1( Ti)	-	500	-
7.1(Cr)	-	500	-
7.1(Mo)	-	500	-
7.1(Ni)	-	500	-
7.1( Nitrogen%)	-	500	-
7.1(CE)	-	500	-
Cl. 14(Weight)	-	500	-
Cl. 12, 13(Camber)	-	500	-
Cl. 12, 13(Thickness)	-	500	-
Cl. 8, Table 3(Elongation)	-	500	-
Cl. 8, Table 3(Yield Stress)	-	1000	-
Cl 12 & 13(Length, Width & Thickness)	-	500	-
Cl 11(Workmanship)	-	100	-
Cl 9(Press)	-	1000	-
Cl 8 & Table 3(UTM)	-	1000	-
Cl 8 & Table 3(UTM)	-	1000	-
Cl 9(Press)	-	1000	-
Cl 11(Workmanship)	-	100	-
Cl 12 & 13(Length, Width & Thickness)	-	500	-
7.0 (7)(Micro Alloying elements - IS:8811)	-	500	-
8.0 (1)(Tensile Strength-IS:1608(P1))	-	1000	-
8.0 (2)(Yield Strength-IS:1608(P1))	-	1000	-
8.0 (3)(Elongation on 5.65 SoA GL-IS:1608(P1))	-	1000	-
12 (1)(Width - SOP MT-23)	-	500	-
12 (2)(Thickness- SOP MT-23)	-	500	-
12 (3)(Mass of Strip- SOP MT-23)	-	500	-
15.0 & 15.1(Coil edges - IS:10748)	-	500	-
15.0 & 15.2(Surface finish - IS:10748)	-	500	-
15.0 & 15.5(Telescopicity - IS:10748)	-	500	-
15(Condition of Coil)	-	100	-
16(Marking)	-	100	-
3.4(Vehicle Fuel System)	-	0	-
9(Protective Treatment)	-	100	-
Table 1 ( Clauses 7.1 ,7.2 )(Tungsten (W))	-	500	-
Table 1 ( Clauses 7.1 ,7.2 )(Boron (B))	-	500	-
CL 12(Average Width (04))	-	500	-
CL 12(Average Thickness (08))	-	500	-

28 Nov, 2028

-
Included w.e.f 31.12.2025

1638

Stellar Test House, Noida

8171606

IS 3854 (2023)

Switches for Domestic and Similar Purposes - Specification (Third Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General Requirements)	-	500	-
Cl-5(General notes on tests)	-	500	-
Cl-6(Rating)	-	500	-
Cl-7(Classification)	-	500	-
Cl-8(Marking)	-	500	-
Cl-9(Checking of dimensions)	-	500	-
Cl-10.1, 10.2(Prevention of Access to Live Parts)	-	500	-
Cl-10.3(Requirements for Accessible Metal Parts)	-	500	-
Cl-10.4(Requirements for Insulation of the Mechanism)	-	500	-
Cl. 10.5(Requirements for Insulation of the Mechanism with Respect to the Surrounding Environment)	-	500	-
Cl-10.6(Requirements for Switches Operated Indirectly)	-	500	-
Cl-10.7(Requirements for Switches with Replaceable Pull Cord)	-	500	-
Cl-11(Provision for earthing)	-	1000	-
Cl-12(Terminals)	-	1000	-
Cl-13(Constructional requirements)	-	1500	-
Cl-14(Mechanism)	-	1000	-
Cl-15.1(Resistance to Ageing)	-	2000	-
Cl-15.2(Protection Provided by Enclosures of Switches)	-	1000	-
Cl-15.3(Resistance to Humidity)	-	1500	-
Cl-16.1(General)	-	500	-
Cl-16.2(Test for Measuring the Insulation Resistance)	-	1000	-
Cl-16.3(Electric Strength Test)	-	1000	-
Cl-17(Temperature rise)	-	1500	-
Cl-18(Making and breaking capacity)	-	1000	-
Cl-19(Normal operation)	-	1000	-
Cl-20(Mechanical strength)	-	1000	-
Cl-21(Resistance to heat)	-	1000	-
Cl-22(Screws, current carrying parts and connections)	-	1000	-
Cl-23(Creepage distances, clearances and distance through sealing compound)	-	500	-
Cl-24.1(Resistance to abnormal heat and fire)	-	1000	-
Cl-24.2(Resistance to tracking)	-	1000	-
Cl-25(Resistance to rusting)	-	1000	-
19.1(Test for Switches Intended for Inductive Loads)	-	1000	-
19.2(Test for Switches Intended for Externally Ballasted Lamp Loads)	-	1000	-
19.3(Test for Switches Intended for Self-ballasted Lamp Loads)	-	1000	-
13.5(Attachment of knobs)	-	1500	-
12.3.11(Table 11)(Test Current for the Verification of Electrical and Thermal Stresses in Normal Use of Screwless Terminals)	-	1000	-
12.3.12(Table 13)(Deflection Test Forces)	-	1000	-
Cl-4(General Requirements)	-	500	-
Cl-5(General notes on tests)	-	500	-
Cl-6(Rating)	-	500	-
Cl-7(Classification)	-	500	-
Cl-8(Marking)	-	500	-
Cl-9(Checking of dimensions)	-	500	-
Cl-10.1, 10.2(Prevention of Access to Live Parts)	-	500	-
Cl-10.3(Requirements for Accessible Metal Parts)	-	500	-
Cl-10.4(Requirements for Insulation of the Mechanism)	-	500	-
Cl. 10.5(Requirements for Insulation of the Mechanism with Respect to the Surrounding Environment)	-	500	-
Cl-10.6(Requirements for Switches Operated Indirectly)	-	1000	-
Cl-10.7(Requirements for Switches with Replaceable Pull Cord)	-	500	-
Cl-11(Provision for earthing)	-	1000	-
Cl-12(Terminals)	-	1000	-
Cl-13(Constructional requirements)	-	1000	-
Cl-14(Mechanism)	-	1000	-
Cl-15.1(Resistance to Ageing)	-	1000	-
Cl-15.2(Protection Provided by Enclosures of Switches)	-	1000	-
Cl-15.3(Resistance to Humidity)	-	1000	-
Cl-16.1(General)	-	500	-
Cl-16.2(Test for Measuring the Insulation Resistance)	-	500	-
Cl-16.3(Electric Strength Test)	-	1000	-
Cl-17(Temperature rise)	-	1000	-
Cl-18(Making and breaking capacity)	-	1000	-
Cl-19(Normal operation)	-	1000	-
Cl-20(Mechanical strength)	-	1000	-
Cl-21(Resistance to heat)	-	1000	-
Cl-22(Screws, current carrying parts and connections)	-	1000	-
Cl-23(Creepage distances, clearances and distance through sealing compound)	-	500	-
Cl-24.1(Resistance to abnormal heat and fire)	-	1000	-
Cl-24.2(Resistance to tracking)	-	1000	-
Cl-25(Resistance to rusting)	-	1000	-
19.1(Test for Switches Intended for Inductive Loads)	-	1000	-
19.2(Test for Switches Intended for Externally Ballasted Lamp Loads)	-	1000	-
19.3(Test for Switches Intended for Self-ballasted Lamp Loads)	-	1000	-
13.5(Attachment of knobs)	-	500	-
12.3.11(Table 11)(Test Current for the Verification of Electrical and Thermal Stresses in Normal Use of Screwless Terminals)	-	500	-
12.3.12(Table 13)(Deflection Test Forces)	-	500	-
Cl-4(General Requirements)	-	500	-
Cl-5(General notes on tests)	-	500	-
Cl-6(Rating)	-	500	-
Cl-7(Classification)	-	500	-
Cl-8(Marking)	-	500	-
Cl-9(Checking of dimensions)	-	500	-
Cl-10.1, 10.2(Prevention of Access to Live Parts)	-	500	-
Cl-10.3(Requirements for Accessible Metal Parts)	-	500	-
Cl-10.4(Requirements for Insulation of the Mechanism)	-	500	-
Cl. 10.5(Requirements for Insulation of the Mechanism with Respect to the Surrounding Environment)	-	500	-
Cl-10.6(Requirements for Switches Operated Indirectly)	-	1000	-
Cl-10.7(Requirements for Switches with Replaceable Pull Cord)	-	1000	-
Cl-11(Provision for earthing)	-	1000	-
Cl-12(Terminals)	-	1000	-
Cl-13(Constructional requirements)	-	1000	-
Cl-14(Mechanism)	-	1500	-
Cl-15.1(Resistance to Ageing)	-	1000	-
Cl-15.2(Protection Provided by Enclosures of Switches)	-	1000	-
Cl-15.3(Resistance to Humidity)	-	1000	-
Cl-16.1(General)	-	500	-
Cl-16.2(Test for Measuring the Insulation Resistance)	-	500	-
Cl-16.3(Electric Strength Test)	-	1000	-
Cl-17(Temperature rise)	-	1000	-
Cl-18(Making and breaking capacity)	-	1000	-
Cl-19(Normal operation)	-	1000	-
Cl-20(Mechanical strength)	-	1000	-
Cl-21(Resistance to heat)	-	1000	-
Cl-22(Screws, current carrying parts and connections)	-	1000	-
Cl-23(Creepage distances, clearances and distance through sealing compound)	-	500	-
Cl-24.1(Resistance to abnormal heat and fire)	-	1000	-
Cl-24.2(Resistance to tracking)	-	1000	-
Cl-25(Resistance to rusting)	-	1000	-
19.1(Test for Switches Intended for Inductive Loads)	-	1000	-
19.2(Test for Switches Intended for Externally Ballasted Lamp Loads)	-	1000	-
19.3(Test for Switches Intended for Self-ballasted Lamp Loads)	-	1000	-
13.5(Attachment of knobs)	-	1000	-
12.3.11(Table 11)(Test Current for the Verification of Electrical and Thermal Stresses in Normal Use of Screwless Terminals)	-	1000	-
12.3.12(Table 13)(Deflection Test Forces)	-	1000	-
Cl-4(General Requirements)	-	500	-
Cl-5(General notes on tests)	-	500	-
Cl-6(Rating)	-	500	-
Cl-7(Classification)	-	500	-
Cl-8(Marking)	-	500	-
Cl-9(Checking of dimensions)	-	500	-
Cl-10.1, 10.2(Prevention of Access to Live Parts)	-	500	-
Cl-10.3(Requirements for Accessible Metal Parts)	-	500	-
Cl-10.4(Requirements for Insulation of the Mechanism)	-	500	-
Cl. 10.5(Requirements for Insulation of the Mechanism with Respect to the Surrounding Environment)	-	500	-
Cl-10.6(Requirements for Switches Operated Indirectly)	-	1000	-
Cl-10.7(Requirements for Switches with Replaceable Pull Cord)	-	1000	-
Cl-11(Provision for earthing)	-	1000	-
Cl-12(Terminals)	-	1000	-
Cl-13(Constructional requirements)	-	1500	-
Cl-14(Mechanism)	-	1500	-
Cl-15.1(Resistance to Ageing)	-	1000	-
Cl-15.2(Protection Provided by Enclosures of Switches)	-	1000	-
Cl-15.3(Resistance to Humidity)	-	1000	-
Cl-16.1(General)	-	500	-
Cl-16.2(Test for Measuring the Insulation Resistance)	-	1000	-
Cl-16.3(Electric Strength Test)	-	1000	-
Cl-17(Temperature rise)	-	1000	-
Cl-18(Making and breaking capacity)	-	1000	-
Cl-19(Normal operation)	-	1000	-
Cl-20(Mechanical strength)	-	1000	-
Cl-21(Resistance to heat)	-	1000	-
Cl-22(Screws, current carrying parts and connections)	-	1000	-
Cl-23(Creepage distances, clearances and distance through sealing compound)	-	500	-
Cl-24.1(Resistance to abnormal heat and fire)	-	1000	-
Cl-24.2(Resistance to tracking)	-	1000	-
Cl-25(Resistance to rusting)	-	1000	-
19.1(Test for Switches Intended for Inductive Loads)	-	1000	-
19.2(Test for Switches Intended for Externally Ballasted Lamp Loads)	-	1000	-
19.3(Test for Switches Intended for Self-ballasted Lamp Loads)	-	1000	-
13.5(Attachment of knobs)	-	1000	-
12.3.11(Table 11)(Test Current for the Verification of Electrical and Thermal Stresses in Normal Use of Screwless Terminals)	-	1000	-
12.3.12(Table 13)(Deflection Test Forces)	-	1000	-
Cl-4(General Requirements)	-	500	-
Cl-5(General notes on tests)	-	500	-
Cl-6(Rating)	-	500	-
Cl-7(Classification)	-	500	-
Cl-8(Marking)	-	500	-
Cl-9(Checking of dimensions)	-	500	-
Cl-10.1, 10.2(Prevention of Access to Live Parts)	-	1000	-
Cl-10.3(Requirements for Accessible Metal Parts)	-	1000	-
Cl-10.4(Requirements for Insulation of the Mechanism)	-	1000	-
Cl. 10.5(Requirements for Insulation of the Mechanism with Respect to the Surrounding Environment)	-	1000	-
Cl-10.6(Requirements for Switches Operated Indirectly)	-	1000	-
Cl-10.7(Requirements for Switches with Replaceable Pull Cord)	-	1000	-
Cl-11(Provision for earthing)	-	1000	-
Cl-12(Terminals)	-	1000	-
Cl-13(Constructional requirements)	-	1500	-
Cl-14(Mechanism)	-	1500	-
Cl-15.1(Resistance to Ageing)	-	1000	-
Cl-15.2(Protection Provided by Enclosures of Switches)	-	1000	-
Cl-15.3(Resistance to Humidity)	-	1500	-
Cl-16.1(General)	-	500	-
Cl-16.2(Test for Measuring the Insulation Resistance)	-	1000	-
Cl-16.3(Electric Strength Test)	-	1000	-
Cl-17(Temperature rise)	-	1000	-
Cl-18(Making and breaking capacity)	-	1000	-
Cl-19(Normal operation)	-	1000	-
Cl-20(Mechanical strength)	-	1500	-
Cl-21(Resistance to heat)	-	1000	-
Cl-22(Screws, current carrying parts and connections)	-	1500	-
Cl-23(Creepage distances, clearances and distance through sealing compound)	-	1000	-
Cl-24.1(Resistance to abnormal heat and fire)	-	1000	-
Cl-24.2(Resistance to tracking)	-	1000	-
Cl-25(Resistance to rusting)	-	1000	-
19.1(Test for Switches Intended for Inductive Loads)	-	1000	-
19.2(Test for Switches Intended for Externally Ballasted Lamp Loads)	-	1000	-
19.3(Test for Switches Intended for Self-ballasted Lamp Loads)	-	1000	-
13.5(Attachment of knobs)	-	1000	-
12.3.11(Table 11)(Test Current for the Verification of Electrical and Thermal Stresses in Normal Use of Screwless Terminals)	-	1000	-
12.3.12(Table 13)(Deflection Test Forces)	-	1000	-

26 Sep, 2028

-
Included w.e.f 24.02.2026

1639

ARYAVRAT TEST HOUSE PRIVATE LIMITED

5191706

IS 3601 (2006)

Steel tubes for mechanical and general engineering purposes - Specification (Second Revision)

All Type

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Material)	-	100	-
13(Mechanical Testing)	-	1000	-
6.0(Workmanship)	-	100	-
4.1(Sulphur-Percentage by mass)	-	500	-
4.1(Phosphorus-Percentage by mass)	-	500	-
8.0(Straightness)	-	200	-
19.1.1, 24.1.1, 28.1.1, 33.1.1(Dimensions- Outside Dia)	-	200	-
19.1.2, 24.1.2, 28.1.2, 33.1.2(Dimensions- Thickness)	-	200	-
11.1(Surface Protection)	-	200	-
11.2(Surface Protection)	-	200	-
13.1.3(Tensile Strength)	-	1000	-
13.1.1(Yield Stress)	-	1000	-
13.1.2(Elongation)	-	1000	-
13.2(Flattening Test)	-	1000	-
13.3(Bend Test (Strip))	-	1000	-
13.4(Bend Test (Whole Tube))	-	1000	-
13.5(Drift Expansion Test)	-	1000	-
13.6(Crush Test)	-	1000	-
19.1.3(Height of Internal Fin)	-	200	-
6.0(Workmanship)	-	100	-
4.1(Sulphur-Percentage by mass)	-	500	-
4.1(Phosphorus-Percentage by mass)	-	500	-
8.0(Straightness)	-	200	-
19.1.1, 24.1.1, 28.1.1, 33.1.1(Dimensions- Outside Dia)	-	200	-
19.1.2, 24.1.2, 28.1.2, 33.1.2(Dimensions- Thickness)	-	200	-
11.1(Surface Protection)	-	200	-
11.2(Surface Protection)	-	200	-
13.1.3(Tensile Strength)	-	1000	-
13.1.1(Yield Stress)	-	1000	-
13.1.2(Elongation)	-	1000	-
13.2(Flattening Test)	-	1000	-
13.3(Bend Test (Strip))	-	1000	-
13.4(Bend Test (Whole Tube))	-	1000	-
13.5(Drift Expansion Test)	-	1000	-
13.6(Crush Test)	-	1000	-
19.1.3(Height of Internal Fin)	-	200	-
Cl. 10 Annex B Cl. 17, Cl. 19(Moment of inertia)	-	0	-
Cl. 10 Annex B Cl. 17, Cl. 19(Radius of gyration)	-	0	-
Cl. 10 Annex B Cl. 17, Cl. 19(Modulus of section)	-	0	-
Cl. 10 Annex B Cl. 17, Cl. 19(Area of cross section)	-	200	-
Cl. 19.1.3(Internal Fin Height)	-	200	-
Cl. 10 Annex B Cl. 17, Cl. 19(Mass)	-	200	-
Cl. 9(Length)	-	200	-
4.0 (a)(Carbon as C - IS:8811)	-	200	-
4.0 (b)(Manganese as Mn - IS:8811)	-	200	-
4.0 (b)(Manganese as Mn - IS:8811)	-	200	-
4.0 (c)(Micro Alloying elements (Nb+V+Ti))	-	200	-
4.0 (f)(Nitrogen content)	-	2002	-
9(Length -SOP MT-23)	-	200	-
10(Outside diameter-SOP MT-23)	-	200	-
10(Thickness - SOP MT-23)	-	200	-
10(Mass of Tube-SOP MT-23)	-	200	-
10(Area of Cross Section)	-	200	-
16(Marking)	-	100	-
CL 10("1.Outer dia (04) 2.Thickness (08)")	-	200	-
CL 10(Minimum Outer dia (04))	-	200	-
CL 10(Maximum Outer dia (04))	-	200	-
Cl-10(" Minimum Thickness (08)")	-	200	-
CL 10(Maximum Thickness (08))	-	200	-
4(Material)	-	200	-
13(Mechanical Testing)	-	1000	-
Cl. 10 Annex B Cl. 17, Cl. 19(Moment of inertia)	-	0	-
Cl. 10 Annex B Cl. 17, Cl. 19(Radius of gyration)	-	0	-
Cl. 10 Annex B Cl. 17, Cl. 19(Modulus of section)	-	0	-
Cl. 10 Annex B Cl. 17, Cl. 19(Area of cross section)	-	200	-
Cl. 19.1.3(Internal Fin Height)	-	200	-
Cl. 10 Annex B Cl. 17, Cl. 19(Mass)	-	200	-
Cl. 9(Length)	-	200	-
4.0 (a)(Carbon as C - IS:8811)	-	200	-
4.0 (b)(Manganese as Mn - IS:8811)	-	200	-
4.0 (b)(Manganese as Mn - IS:8811)	-	200	-
4.0 (c)(Micro Alloying elements (Nb+V+Ti))	-	200	-
4.0 (f)(Nitrogen content)	-	200	-
9(Length -SOP MT-23)	-	200	-
10(Outside diameter-SOP MT-23)	-	200	-
10(Thickness - SOP MT-23)	-	200	-
10(Mass of Tube-SOP MT-23)	-	200	-
10(Area of Cross Section)	-	200	-
16(Marking)	-	100	-
CL 10("1.Outer dia (04) 2.Thickness (08)")	-	200	-
CL 10(Minimum Outer dia (04))	-	200	-
CL 10(Maximum Outer dia (04))	-	200	-
Cl-10(" Minimum Thickness (08)")	-	200	-
CL 10(Maximum Thickness (08))	-	200	-

28 Nov, 2028

-
included w.e.f 30.01.2026

1640

ARYAVRAT TEST HOUSE PRIVATE LIMITED

5191706

IS 4923 (2017)

Hollow steel sections for structural use - Specification (Third Revision)

All Type

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.7.1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl.7.1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl.7.1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl.7.1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl.7.1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl.7.1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl.7.1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl.7.1(Niobium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl.7.1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl.7.1(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl.7.1(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl.7.1(Carbon Equivalent-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Depth))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Width))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Thickness))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Weigth))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Area of Section))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about X-X))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about Y-Y))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration about X-X))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Radius of Gyration about Y-Y))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Elastic Modulus))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Elastic Modulus about X-X))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Elastic Modulus about Y-Y))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus about X-X))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Plastic Modulus about Y-Y))	-	5000	-
Cl. 10.1, 14.1, 18.1(Straightness)	-	5000	-
Cl. 10.2, Fig 1(Outside dimension (B))	-	5000	-
Cl. 10.2, Fig 1(Outside dimension (H))	-	5000	-
Cl. 10.2, Fig 1(Outside dimension (T))	-	5000	-
Cl. 10.4, Fig 2(Concavity, X1)	-	5000	-
Cl. 10.4, Fig 2(Convexity, X2)	-	5000	-
Cl. 10.5, Fig 3(Squareness of side)	-	5000	-
Cl. 10.6, Fig 4(External Corner Radius)	-	5000	-
Cl. 10.7, Fig 5(Total twist, V)	-	5000	-
Cl. 15.2, Table 3(Tensile Strength- IS 1608)	-	5000	-
Cl. 15.2, Table 3(Yield Strength- IS 1608)	-	5000	-
Cl. 15.2, Table 3(Elongation- IS 1608)	-	5000	-
Cl. 14.1(Exact Length)	-	5000	-
Cl. 14.1(Random Length)	-	5000	-
Cl. 14.1(Weight on individual length)	-	5000	-
Cl. 14.1(Weight on lots of 10 tonnes min)	-	5000	-
Cl. 18, Note 2(Internal Fin Height (Only for Cold Formed))	-	5000	-
7(Micro Alloying elements(Nb+V+Ti))	-	5000	-
7(Carbon equivalent as CE)	-	5000	-
10.4(Concavity/Convexity-SOP MT-23)	-	5000	-
10.5(Squareness of corner/Sides-SOP MT-23)	-	5000	-
10.6("External corner Radius/ Radii of corners-outside - SOP MT-23")	-	5000	-
11(Oiling & Painting - IS 4923)	-	5000	-
18.1(Height of the internal weld fin - IS 4923)	-	5000	-
10.3(Thickness - IS 4923)	-	5000	-
13(Marking)	-	5000	-
Cl-19(Mechanical Tests)	-	5000	-
Cl.7.1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl.7.1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl.7.1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl.7.1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl.7.1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl.7.1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl.7.1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl.7.1(Niobium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl.7.1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl.7.1(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl.7.1(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl.7.1(Carbon Equivalent-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Depth))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Width))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Thickness))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Weigth))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Area of Section))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about X-X))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about Y-Y))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration about X-X))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Radius of Gyration about Y-Y))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Elastic Modulus))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Elastic Modulus about X-X))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Elastic Modulus about Y-Y))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus about X-X))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Plastic Modulus about Y-Y))	-	5000	-
Cl. 10.1, 14.1, 18.1(Straightness)	-	5000	-
Cl. 10.2, Fig 1(Outside dimension (B))	-	5000	-
Cl. 10.2, Fig 1(Outside dimension (H))	-	5000	-
Cl. 10.2, Fig 1(Outside dimension (T))	-	5000	-
Cl. 10.4, Fig 2(Concavity, X1)	-	5000	-
Cl. 10.4, Fig 2(Convexity, X2)	-	5000	-
Cl. 10.5, Fig 3(Squareness of side)	-	5000	-
Cl. 10.6, Fig 4(External Corner Radius)	-	5000	-
Cl. 10.7, Fig 5(Total twist, V)	-	5000	-
Cl. 15.2, Table 3(Tensile Strength- IS 1608)	-	5000	-
Cl. 15.2, Table 3(Yield Strength- IS 1608)	-	5000	-
Cl. 15.2, Table 3(Elongation- IS 1608)	-	5000	-
Cl. 14.1(Exact Length)	-	5000	-
Cl. 14.1(Random Length)	-	5000	-
Cl. 14.1(Weight on individual length)	-	5000	-
Cl. 14.1(Weight on lots of 10 tonnes min)	-	5000	-
Cl. 18, Note 2(Internal Fin Height (Only for Cold Formed))	-	5000	-
7(Micro Alloying elements(Nb+V+Ti))	-	5000	-
7(Carbon equivalent as CE)	-	5000	-
10.4(Concavity/Convexity-SOP MT-23)	-	5000	-
10.5(Squareness of corner/Sides-SOP MT-23)	-	5000	-
10.6("External corner Radius/ Radii of corners-outside - SOP MT-23")	-	5000	-
11(Oiling & Painting - IS 4923)	-	5000	-
18.1(Height of the internal weld fin - IS 4923)	-	5000	-
10.3(Thickness - IS 4923)	-	5000	-
13(Marking)	-	5000	-
Cl-19(Mechanical Tests)	-	5000	-
Cl.7.1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl.7.1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl.7.1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl.7.1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl.7.1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl.7.1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl.7.1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl.7.1(Niobium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl.7.1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl.7.1(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl.7.1(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl.7.1(Carbon Equivalent-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Depth))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Width))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Thickness))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Weigth))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Area of Section))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about X-X))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about Y-Y))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration about X-X))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Radius of Gyration about Y-Y))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Elastic Modulus))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Elastic Modulus about X-X))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Elastic Modulus about Y-Y))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus about X-X))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Plastic Modulus about Y-Y))	-	5000	-
Cl. 10.1, 14.1, 18.1(Straightness)	-	5000	-
Cl. 10.2, Fig 1(Outside dimension (B))	-	5000	-
Cl. 10.2, Fig 1(Outside dimension (H))	-	5000	-
Cl. 10.2, Fig 1(Outside dimension (T))	-	5000	-
Cl. 10.4, Fig 2(Concavity, X1)	-	5000	-
Cl. 10.4, Fig 2(Convexity, X2)	-	5000	-
Cl. 10.5, Fig 3(Squareness of side)	-	5000	-
Cl. 10.6, Fig 4(External Corner Radius)	-	5000	-
Cl. 10.7, Fig 5(Total twist, V)	-	5000	-
Cl. 15.2, Table 3(Tensile Strength- IS 1608)	-	5000	-
Cl. 15.2, Table 3(Yield Strength- IS 1608)	-	5000	-
Cl. 15.2, Table 3(Elongation- IS 1608)	-	5000	-
Cl. 14.1(Exact Length)	-	5000	-
Cl. 14.1(Random Length)	-	5000	-
Cl. 14.1(Weight on individual length)	-	5000	-
Cl. 14.1(Weight on lots of 10 tonnes min)	-	5000	-
Cl. 18, Note 2(Internal Fin Height (Only for Cold Formed))	-	5000	-
7(Micro Alloying elements(Nb+V+Ti))	-	5000	-
7(Carbon equivalent as CE)	-	5000	-
10.4(Concavity/Convexity-SOP MT-23)	-	5000	-
10.5(Squareness of corner/Sides-SOP MT-23)	-	5000	-
10.6("External corner Radius/ Radii of corners-outside - SOP MT-23")	-	5000	-
11(Oiling & Painting - IS 4923)	-	5000	-
18.1(Height of the internal weld fin - IS 4923)	-	5000	-
10.3(Thickness - IS 4923)	-	5000	-
13(Marking)	-	5000	-
Cl-19(Mechanical Tests)	-	5000	-
Cl.7.1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-	-
Cl.7.1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-	-
Cl.7.1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-	-
Cl.7.1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-	-
Cl.7.1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-	-
Cl.7.1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-	-
Cl.7.1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-	-
Cl.7.1(Niobium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-	-
Cl.7.1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-	-
Cl.7.1(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-	-
Cl.7.1(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-	-
Cl.7.1(Carbon Equivalent-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Depth))	-	-	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Width))	-	-	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Thickness))	-	-	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Weigth))	-	-	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Area of Section))	-	-	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia))	-	-	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about X-X))	-	-	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about Y-Y))	-	-	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration))	-	-	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration about X-X))	-	-	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Radius of Gyration about Y-Y))	-	-	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Elastic Modulus))	-	-	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Elastic Modulus about X-X))	-	-	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Elastic Modulus about Y-Y))	-	-	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus))	-	-	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus about X-X))	-	-	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Plastic Modulus about Y-Y))	-	-	-
Cl. 10.1, 14.1, 18.1(Straightness)	-	-	-
Cl. 10.2, Fig 1(Outside dimension (B))	-	-	-
Cl. 10.2, Fig 1(Outside dimension (H))	-	-	-
Cl. 10.2, Fig 1(Outside dimension (T))	-	-	-
Cl. 10.4, Fig 2(Concavity, X1)	-	-	-
Cl. 10.4, Fig 2(Convexity, X2)	-	-	-
Cl. 10.5, Fig 3(Squareness of side)	-	-	-
Cl. 10.6, Fig 4(External Corner Radius)	-	-	-
Cl. 10.7, Fig 5(Total twist, V)	-	-	-
Cl. 15.2, Table 3(Tensile Strength- IS 1608)	-	-	-
Cl. 15.2, Table 3(Yield Strength- IS 1608)	-	-	-
Cl. 15.2, Table 3(Elongation- IS 1608)	-	-	-
Cl. 14.1(Exact Length)	-	-	-
Cl. 14.1(Random Length)	-	-	-
Cl. 14.1(Weight on individual length)	-	-	-
Cl. 14.1(Weight on lots of 10 tonnes min)	-	-	-
Cl. 18, Note 2(Internal Fin Height (Only for Cold Formed))	-	-	-
7(Micro Alloying elements(Nb+V+Ti))	-	-	-
7(Carbon equivalent as CE)	-	-	-
10.4(Concavity/Convexity-SOP MT-23)	-	-	-
10.5(Squareness of corner/Sides-SOP MT-23)	-	-	-
10.6("External corner Radius/ Radii of corners-outside - SOP MT-23")	-	-	-
11(Oiling & Painting - IS 4923)	-	-	-
18.1(Height of the internal weld fin - IS 4923)	-	-	-
10.3(Thickness - IS 4923)	-	-	-
13(Marking)	-	-	-
Cl-19(Mechanical Tests)	-	-	-

28 Nov, 2028

-
Included w.e.f 01.04.2026

1641

KSA LABS LLP, Vadodara

7186606

IS 13098 (2024)

AUTOMOTIVE VEHICLES TUBES FOR PNEUMATIC TYRES â SPECIFICATION (second revision)

All

17000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 3.1(Materials)	-	500	-
Cl 3.2(Classification)	-	500	-
Cl 3.2.1(Blend Name)	-	500	-
Cl 3.3(Fit)	-	1500	-
Cl 3.3.1(Thickness Uniformity)	-	2000	-
Cl 4.1.1(Elongation)	-	3000	-
Cl 4.1.2(Strength of Splice)	-	3000	-
Cl 4.1.3(Set After Ageing)	-	2000	-
Cl 4.1.4(Accelerated Ageing)	-	4000	-
Cl 5(AIR TIGHTNESS)	-	2000	-
Cl 6(MARKING)	-	750	-
Cl 3.1(Materials)	-	500	-
Cl 3.2(Classification)	-	500	-
Cl 3.2.1(Blend Name)	-	500	-
Cl 3.3(Fit)	-	1500	-
Cl 3.3.1(Thickness Uniformity)	-	2000	-
Cl 4.1.1(Elongation)	-	3000	-
Cl 4.1.2(Strength of Splice)	-	3000	-
Cl 4.1.3(Set After Ageing)	-	2000	-
Cl 4.1.4(Accelerated Ageing)	-	4000	-
Cl 5(AIR TIGHTNESS)	-	2000	-
Cl 6(MARKING)	-	750	-
Cl 3.1(Materials)	-	500	-
Cl 3.2(Classification)	-	500	-
Cl 3.2.1(Blend Name)	-	500	-
Cl 3.3(Fit)	-	1500	-
Cl 3.3.1(Thickness Uniformity)	-	2000	-
Cl 4.1.1(Elongation)	-	3000	-
Cl 4.1.2(Strength of Splice)	-	3000	-
Cl 4.1.3(Set After Ageing)	-	2000	-
Cl 4.1.4(Accelerated Ageing)	-	4000	-
Cl 5(AIR TIGHTNESS)	-	2000	-
Cl 6(MARKING)	-	750	-

24 Jun, 2028

-
included w.e.f 17.02.2026

1642

ACE TEST HOUSE PRIVATE LIMITED (8161906), NEW DELHI

8161906

IS 1077 (1992)

Common burnt clay building bricks - Specification (Fifth Revision)

Class designation 35,30,25,20,17.5,15.0,12.5,10,7.5,5.0,3.5

2400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Common burnt clay bricks)	-	0	-
5(General Quality)	-	0	-
6.1(Dimensions)	-	500	-
6.2(Tolerances)	-	200	-
7.1(Compressive strength)	-	500	-
7.2(Water Absorption)	-	500	-
7.3(Efflorescence)	-	500	-
9(Marking)	-	200	-

26 Aug, 2027

-
Included w.e.f. 24.12.2025

1643

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 15477 (2019)

Adhesives for use with ceramic tiles and mosaics

Type1,2,3,4,5

19400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Classification)	-	19400	-
5.1(Tensile Adhesion Strength )	-	19400	-
5.1(Tensile Adhesion Strength)	-	19400	-
5.2(Shear Adhesion Strength )	-	19400	-
5.2(Shear Adhesion Strength)	-	19400	-
5.2(Shear Adhesion Strength)	-	19400	-
5.3(OpenTime)	-	19400	-
5.4(Adjustment Time)	-	19400	-
5.5(Slip (Required for Vertical Application Only))	-	19400	-
5.6(Deformability (Required for VerticalApplication Only))	-	19400	-
8.2(Marking)	-	19400	-

-
Included w.e.f. 24.12.2025

1644

Samridhi Test House Pvt. Ltd.

8184706

IS 302 : Part 2 : Sec 30 (2007)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 30 room heaters (First Revision)

All Grade / Type / Size / Designation

3200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 (Classification)	-	100	-
Cl.6 (Classification)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	100	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7(Marking and Instructions)	-	0	-
Cl.7(Marking and Instructions)	-	0	-
Cl.7(Marking and Instructions)	-	0	-
Cl.7.3(Marking and Instructions)	-	0	-
Cl.7.3(Marking and Instructions)	-	0	-
Cl.7.3(Marking and Instructions)	-	0	-
Cl.7.4(Marking and Instructions)	-	0	-
Cl.7.5(Marking and Instructions)	-	0	-
Cl.7.6 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.8 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.9 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.10 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.11 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2009(Marking and Instructions)	-	0	-
Cl.7.13 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.14 of IS302-1:2008(Marking and Instructions)	-	0	-
Cl.7.14(Marking and Instructions)	-	0	-
Cl.7.14(Marking and Instructions)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.101(Marking and Instructions)	-	0	-
Cl.8 & IS:302-1:2008(Protection Against Access to Live Parts)	-	100	-
Cl.10 & IS:302-1:2008(Power Input and Current)	-	100	-
Cl.11 & IS:302-1:2008(Heating)	-	100	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11.8(Heating)	-	0	-
Cl.11.8(Heating)	-	0	-
Cl.11.8(Heating)	-	0	-
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	100	-
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	0	-
Cl.14 & IS:302-1:2008(Transient Over Voltages)	-	100	-
Cl.15 & IS: 302-1:2008(Moisture Resistance )	-	300	-
Cl.15.3 of IS 302-1:200(Moisture Resistance )	-	0	-
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	100	-
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	0	-
Cl.17 & IS:302-1:2008(Over load Protection of Transformers and Associated Circuits )	-	100	-
Cl.18 (Endurance. )	-	0	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	500	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	0	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	0	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	0	-
Cl.19.101(Abnormal Operation.)	-	0	-
Cl.19.102(Abnormal Operation.)	-	0	-
Cl.19.103(Abnormal Operation.)	-	0	-
Cl.19.104(Abnormal Operation.)	-	0	-
Cl.19.105(Abnormal Operation.)	-	0	-
Cl.19.106(Abnormal Operation.)	-	0	-
Table 8 of IS 302-1:2008(Abnormal Operation.)	-	0	-
Cl.19.107(Abnormal Operation.)	-	0	-
Cl.19.108(Abnormal Operation.)	-	0	-
Cl.19.109(Abnormal Operation.)	-	0	-
Cl.19.110(Abnormal Operation.)	-	0	-
Cl.19.111(Abnormal Operation.)	-	0	-
Cl.19.112(Abnormal Operation.)	-	0	-
Cl.19.113(Abnormal Operation.)	-	0	-
Cl.19.114(Abnormal Operation.)	-	0	-
Cl.20 & IS:302-1:2008(Stability & Mechanical Hazards)	-	100	-
Cl.21 & IS:302-1:2008)(Mechanical Strength.)	-	100	-
Cl.21.2 of IS 302-1:2008(Mechanical Strength.)	-	0	-
Cl.21.101 (Mechanical Strength.)	-	0	-
Cl.21.102(Mechanical Strength.)	-	0	-
Cl.21.103(Mechanical Strength.)	-	0	-
Cl.22.1 of IS 302-1:2008(Construction)	-	200	-
Cl.22.5 of IS 302-1:2008(Construction)	-	0	-
Cl.22.6 of IS 302-1:2008(Construction)	-	0	-
Cl.22.7 of IS 302-1:2008(Construction)	-	0	-
Cl.22.8 of IS 302-1:2008(Construction)	-	0	-
Cl.22.9 of IS 302-1:2008(Construction)	-	0	-
Cl.22.11(Construction)	-	0	-
Cl.22.12 of IS 302-1:2008(Construction)	-	0	-
Cl.22.13 of IS 302-1:2008(Construction)	-	0	-
Cl.22.14 of IS 302-1:2008(Construction)	-	0	-
Cl.22.15 of IS 302-1:2008(Construction)	-	0	-
Cl.22.18 of IS 302-1:2008(Construction)	-	0	-
Cl.22.20 of IS 302-1:2008(Construction)	-	0	-
Cl.22.21 of IS 302-1:2008(Construction)	-	0	-
Cl.23 & IS:302-1:2008(Internal Wiring )	-	100	-
Cl.23.4 & Cl.29 of 302-1:2008(Internal Wiring )	-	0	-
Cl.23.5 of 302-1:2008(Internal Wiring )	-	0	-
Cl.23.7 of 302-1:2008(Internal Wiring )	-	0	-
C.23.7 of 302-1:2008(Internal Wiring )	-	0	-
Cl.24.1 of 302-1:2008(Component)	-	100	-
Cl.24.1 of 302-1:2008(Component)	-	0	-
Cl.24.1.3 (Component)	-	0	-
Cl.24.1.3 (Component)	-	0	-
Cl.24.1.3 (Component)	-	0	-
Cl.24.1.3 (Component)	-	0	-
C.24.1.4(Component)	-	0	-
C.24.2 of 302-1:2008(Component)	-	0	-
Cl.24.10(Component)	-	0	-
Cl.25.1 of 302-1:2008(Supply Connection and External Flexible Cords )	-	100	-
Cl. 25.2 of IS 3021:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.3 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.4 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.5 of 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.6 of 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.7.(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.8(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.9(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.10 of 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.11(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.12(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.13(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.14 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.17 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.18(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.20(Supply Connection and External Flexible Cords )	-	0	-
Cl.26.1 of IS 302-1:2008(Terminal for External Conductors )	-	100	-
Cl.26.10 of IS 302-1:2008(Terminal for External Conductors )	-	0	-
Cl.26.11 of IS 302-1:2008(Terminal for External Conductors )	-	0	-
Cl.27.1 of 302-1:2008(Provision for Earthing.)	-	100	-
Cl.27.5 of 302-1:2008(Provision for Earthing.)	-	0	-
Cl.28 of 302-1:2008(Screws and Connections.)	-	100	-
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	100	-
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	0	-
Cl.30 & IS:302-1:2008(Resistance to Heat and Fire)	-	200	-
Cl.30.2.2 of 302-1:2008(Resistance to Heat and Fire)	-	0	-
Cl.31 & IS:302-1:2008(Resistance to Rusting.)	-	100	-
Cl.32 & IS:302-1:2008(Radition,Toxicity and similar Hazards.)	-	100	-
Cl.31 of IS:302-1:2008(Resistance to Rusting.)	-	0	-
Cl.30.2 of 302-1:2008(Resistance to Heat and Fire : Resistance to fire)	-	0	-
Cl.30.1 of IS:302-1:2008(Resistance to Heat and Fire: Resistance to heat. )	-	0	-
Cl.29.2 of IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation : Creepage Distance)	-	0	-
Cl.29.1 of IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation : Clearance )	-	0	-
Cl.28 of 302-1:2008(Screws and Connections.)	-	0	-
Cl.27.5 of 302-1:2008(Provision for Earthing : ECR)	-	0	-
Cl.27.1 of 302-1:2008(Provision for Earthing )	-	0	-
Cl.26 of IS 302-1:2008(Terminal for External Conductors )	-	0	-
Cl.25.20 of 302-1:2008(Supply Connection and External Flexible Cords : Additional insulation )	-	0	-
Cl.25.18 of 302-1:2008(Supply Connection and External Flexible Cords : Arrangement of cord anchorages )	-	0	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords : Cord grip test - displacement)	-	0	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords : Cord grip test - strain at terminals )	-	0	-
Cl. 25.13 of 302-1:2008(Supply Connection and External Flexible Cords : Inlet opening of supply cords )	-	0	-
Cl. 25.12 of 302-1:2008(Supply Connection and External Flexible Cords : Moulding of cords )	-	0	-
Cl.25.10 of 302-1:2008(Supply Connection and External Flexible Cords : Colour of earthing wire )	-	0	-
Cl. 25.9 of 302-1:2008(Supply Connection and External Flexible Cords : Contact with sharp edge )	-	0	-
Cl.25.8 of 302-1:2008(Supply Connection and External Flexible Cords : Resistance of supply wires )	-	0	-
Cl.25.7 of IS:302-2-30:2007(Supply Connection and External Flexible Cords : Supply cords material )	-	0	-
Cl.25.5 of 302-1:2008(Supply Connection and External Flexible Cords : Type of attachments )	-	0	-
Cl.25.1 of 302-1:2008(Supply Connection and External Flexible Cords : Means of connection )	-	0	-
Cl.24 of IS:302-2-30:2007(Component)	-	0	-
Cl.23.7 of 302-1:2008(Internal Wiring : Colour of earting conductor )	-	0	-
Cl.23 of IS:302-1:2008(Internal Wiring )	-	0	-
Cl.22.106 of IS:302-2-30:2007(Construction : Checking of thermostats, timers or similar means for visibl glowing radiant heaters)	-	0	-
Cl.22.106 of IS:302-2-30:2007(Construction : Checking of openings on the underside)	-	0	-
Cl.22.102 & Cl 22.103 of IS:302-2-30:2007(Construction : Fireguard )	-	0	-
Cl.22.101 of IS:302-2-30:2007(Construction : Prevention to contact with heating element)	-	0	-
Cl.22.24 of IS:302-2-30:2007(Construction : test of bare heating element)	-	0	-
Cl.22.18 of IS 302-1:2008(Construction : Resistance to corrosion )	-	0	-
Cl.22.15 of IS 302-1:2008(Construction : Storage hooks for flexible cords)	-	0	-
Cl.22.14 of IS 302-1:2008(Construction : ragged and sharp edges)	-	0	-
Cl.22.13 of IS 302-1:2008(Construction : Position of handles )	-	0	-
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knobs,grips,lever and similer parts )	-	0	-
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable parts )	-	0	-
Cl.22.7 of IS:302-2-30:2007(Construction : Pressure test of oil heater )	-	0	-
Cl.21.101 of IS:302-2-30:2007(Mechanical Strength : fire gaurd deformation test )	-	0	-
Cl.21.2 of IS 302-1:2008(Mechanical Strength : Pentration by sharp implementation )	-	0	-
Cl.21.1 of IS:302-1:2008)(Mechanical Strength : Rough handling )	-	0	-
Cl.20 of IS:302-2-30:2007(Stability of Mechanical Hazards)	-	0	-
Cl.19.114 of IS:302-2-30:2007(Abnormal Operation : the temp. of the surface of the container for oil heaters )	-	0	-
Cl.19.112 of IS:302-2-30:2007(Abnormal Operation : Ignition of bleached cotton gauge)	-	0	-
Cl.19.111 of IS:302-2-30:2007(Abnormal Operation : Ignition of flannelette for Visibly glowing heaters)	-	0	-
Cl.19.110 of IS:302-2-30:2007(Abnormal Operation : operation against wall for visibly glowing radiant heaters )	-	0	-
Cl.19.109 of IS:302-2-30:2007(Abnormal Operation : operation against wall for fan heater )	-	0	-
Cl.19.106 of IS:302-2-30:2007(Abnormal Operation : Locked rotor of fan hetear )	-	0	-
Cl.19.103 , Cl 19.104 of IS:302-2-30:2007(Abnormal Operation : Operation after Covering by cotton)	-	0	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : High Voltage )	-	0	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : temp rise of supply cord )	-	0	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : Temp rise of test corner )	-	0	-
Cl.19 of IS:302-1:2008(Abnormal Operation : Emission of molten or poisonous or ignitable gas)	-	0	-
Cl.16 of IS:302-1:2008(Leakage current and Electric strength (After humidity): Electric Strentgh )	-	0	-
Cl.16 of IS:302-1:2008(Leakage current and Electric strength (After humidity): Leakage current )	-	0	-
Cl.15 of IS 302-1:2008(Moisture Resistance )	-	0	-
Cl.14 of IS:302-1:2008(Transient Over Voltages)	-	0	-
Cl.13 of IS:302-1:2008(Leakage Current of Electric Strength at operating temp. )	-	0	-
Cl.13 of IS:302-1:2008(Leakage Current of Electric Strength at operating temp. )	-	0	-
Cl.11 of IS:302-2:30: 2007(Heating : Room temperature)	-	0	-
Cl.11.8 of IS:302-2:30: 2007(Heating : For liquid filled radiators the temp. rise of the outer surface of the liquid container)	-	0	-
Cl.11 of IS:302-2:30: 2007(Heating : Temperature rise in winding)	-	0	-
Cl.11 of IS:302-2:30: 2007(Heating : Air-outlet grills)	-	0	-
Cl.11 of IS:302-2:30: 2007(Heating : Surfaces of handles, knobs, grips and similar parts)	-	0	-
Cl.11 of IS:302-2:30: 2007(Heating : Wooden supports, walls, ceiling and floor of the test corner)	-	0	-
Cl.11 of IS:302-2:30: 2007(Heating : PVC Insulation )	-	0	-
Cl.10 of IS:302-1:2008(Power Input and Current)	-	0	-
Cl.8 of IS:302-1:2008(Protection Against Access to Live Parts)	-	0	-
Cl.7.101 of IS:302-2:30: 2007(Marking and Instructions : standard mark. )	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions : Visibility of marking concerning covering)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions : discernibility from the out side )	-	0	-
Cl.7.14 of IS:302-2:30: 2007(Marking and Instructions : Height of “Do not cover”)	-	0	-
Cl.7.14 of IS:302-2:30: 2007(Marking and Instructions : height of symbol)	-	0	-
Cl.7.14 of IS302-1:2008(Marking and Instructions : Legibility and durability )	-	0	-
Cl.7.13 of IS 302-1:2008(Marking and Instructions : Languge of instruction and texts )	-	0	-
Cl.7.11 of IS :302-1:2008(Marking and Instructions : Controls )	-	0	-
Cl.7.9 of IS :302-1:2008(Marking and Instructions : switches )	-	0	-
Cl.7.8 of IS :302-1:2008(Marking and Instructions : terminals )	-	0	-
Cl.7.6 of IS:302-1:2008(Marking and Instructions : Symbols )	-	0	-
Cl.7.5 of IS:302-1:2008(Marking and Instructions : upper of lower limit of the rated power input )	-	0	-
Cl 7.1 & Cl.7.6 of IS:302-2:30: 2007(Marking and Instructions : Do not cover )	-	0	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Country of manufacture )	-	0	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Symbol for Class-II )	-	0	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Model or type )	-	0	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Name , trade-mark or identification mark of the manufacturer )	-	0	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : rated power input )	-	0	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Nature of supply )	-	0	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Rated Voltage )	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Injected currents)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-

-
Included w.e.f 06.01.2026 "19.11.4.1 (Electrostatic discharges) 19.11.4.2 (Radiated fields) 19.11.4.3 (Fast transient bursts) 19.11.4.4 (Surge immunity test) 19.11.4.5 (Injected currents)) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.7 (Harmonics)"

1645

Akshat Test Lab & Calibration Services, Ghaziabad

8186526

IS 1554 : Part 1 (1988)

Specification for pvc insulated (Heavy Duty) electric cables: Part 1 for working voltages up to and including 1100 v (Third Revision)

35200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(MATERIALS : CONDUCTOR)	-	0	-
4.1.1(INSULATION : General Purjose Insulaiion)	-	0	-
4.1.2(INSULATION : Heat Resisting Insulation)	-	0	-
5.1(MATERIALS : FILLER AND INNER SHEATH)	-	0	-
5.2(MATERIALS : FILLER AND INNER SHEATH)	-	0	-
6.1(MATERIALS : ARMGURING)	-	0	-
6.2(MATERIALS : ARMGURING)	-	0	-
7.1.1(OUTER SHEATH : For Cables with General Purpose InsuIafion)	-	0	-
7.1.2(OUTER SHEATH : For Cables with Heat Resisting InsuIalion)	-	0	-
8.1(CONSTRUCTION : CONDUCTOR)	-	0	-
8.2(CONSTRUCTION : CONDUCTOR)	-	0	-
9.1(INSULATION )	-	0	-
9.2(INSULATION : Thickness of Insulation)	-	300	-
9.3(INSULATION :Tolerance on Thickness of Insulation)	-	0	-
9.4(INSULATION : Application of Insulation)	-	0	-
10.1(CORE IDENTIFICATION)	-	100	-
10.2(CORE IDENTIFICATION)	-	0	-
10.3(CORE IDENTIFICATION)	-	0	-
10.3.1(Arrangement of Marking)	-	100	-
11.1(LAYING UP OF CORES)	-	100	-
11.2(LAYING UP OF CORES)	-	0	-
12.1(INNER SHEATH)	-	0	-
12.2(INNER SHEATH)	-	0	-
12.3(INNER SHEATH :Thickness of Inner Sheath)	-	300	-
12.3.1(INNER SHEATH :Thickness of Inner Sheath)	-	0	-
13.1.1(ARMOURING : Application)	-	0	-
13.1.2(Armouring: Coverage )	-	400	-
13.1.3(ARMOURING : Direction of lay )	-	100	-
13.1.4(ARMOURING : Application)	-	0	-
13.2(ARMOURING : Type of Armour)	-	0	-
13.2.1(ARMOURING : Type of Armour)	-	0	-
13.3(Armouring : Dimensions -Wire Diameter)	-	400	-
13.3(Armouring : Dimensions -Formed wire )	-	400	-
13.4(ARMOURING : Joints)	-	0	-
13.5.1(ARMOURING : Resistance)	-	400	-
13.5.2(ARMOURING : Resistance)	-	0	-
13.6 a)(ARMOURING: Tensile Strength)	-	500	-
13.6 b)(ARMOURING: Elongation )	-	500	-
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	500	-
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	500	-
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	500	-
13.6 f)(ARMOURING: Mass of zinc coating )	-	600	-
13.6 g)(ARMOURING: Resistivity)	-	400	-
14.1(OUTER SHEATH)	-	0	-
14.2(OUTER SHEATH)	-	0	-
14.3(OUTER SHEATH : Colour )	-	0	-
14.4.1(Thickness of Outer Sheath : Unarmowed Cables)	-	300	-
14.4.2(Thickness of Outer Sheath : Armoured Cables)	-	300	-
15.1 a) 1)(Tests on conductor : Annealing test ( for copper ))	-	500	-
15.1 a) 2)(Tensile test (for aluminium) - Before stranding )	-	400	-
15.1 a) 2)(Tensile test (for aluminium) - After stranding )	-	400	-
15.1 a) 3)(Tests on conductor : Wrapping test ( for aluminium ))	-	300	-
15.1 a) 4)(Tests on conductor : Conductor resistance test)	-	800	-
15.1 a) 4)(Resistance test - Neutral conductor )	-	0	-
15.1 d)1)(Phyaical tests for insulation : Tensile Test)	-	400	-
15.1 d)1)(Phyaical tests for insulation : Elongation )	-	300	-
15.1 d)1)(Physical tests for sheath : Tensile stregth )	-	400	-
15.1 d)1)(Physical tests for sheath : Elongation )	-	300	-
15.1 d)2)(Phyaical tests for insulation- Ageing in air Oven : Tensile Test)	-	800	-
15.1 d)2)(Phyaical tests for insulation - Ageing in air oven : Elongation )	-	0	-
15.1 d)2)(Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	0	-
15.1 d)2)(Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	0	-
15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	800	-
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation )	-	0	-
15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	0	-
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	0	-
15.1 d)3)(Phyaical tests for insulation : Shrinkage )	-	400	-
15.1 d)3)(Phyaical tests for insulation : Shrinkage - Crack observed )	-	0	-
15.1 d)3)(Phyaical tests for Sheath : Shrinkage )	-	400	-
15.1 d)3)(Phyaical tests for Sheath : Shrinkage - Crack observed )	-	0	-
15.1 d)4)(Hot deformation : Insulation )	-	600	-
15.1 d)4)(Hot deformation : Sheath )	-	600	-
15.1 d)5)( Loss of mass in air oven- Insulation )	-	800	-
15.1 d)5)( Loss of mass in air oven- sheath )	-	800	-
15.1 d)6)(Heat shock test- Insulation )	-	400	-
15.1 d)6)(Heat shock test- sheath )	-	400	-
15.1 d)7)(Thermal stability- insulation )	-	500	-
15.1 d)7)(Thermal stability- Sheath )	-	500	-
15.1 e)(Insulation resistance test : Volume Resistivity )	-	500	-
15.1 e)(Insulation resistance test : IR Constant )	-	500	-
15.1 f)(High voltage test ( water immersion test ))	-	800	-
15.1 g)(High voltage test at room temperature)	-	500	-
15.1 g)(High voltage test at room temperature)	-	0	-
15.4 a)(Cold bend test- Insulation ( Optional test))	-	500	-
15.4 a)(Cold bend test- Sheath ( Optional test))	-	500	-
15.4 b)(Cold impact test- Insulation ( Optional test))	-	500	-
15.4 b)(Cold impact test- Sheath ( Optional test))	-	500	-
15.4 c)(Armour resistance test ( for other than mining cables ).- Optional test )	-	500	-
16.1(DETAILS OF TESTS : General)	-	0	-
16.2(DETAILS OF TESTS : High Voltage Test at Room Temperature)	-	0	-
16.3.1(High Voltage Test ( Water Immersion Test ) : a.c. Test)	-	0	-
16.3.2(High Voltage Test ( Water Immersion Test ) : d.c. Test)	-	2000	-
16.4(Flammability Test)	-	400	-
16.5(Oxygen Index Test)	-	1000	-
16.6(Flame Retardance Test on Single Cables)	-	500	-
16.7(Flame Retardance Test on Bunched Cables)	-	1500	-
16.9(Test for Halogen Acid Gas Evolution)	-	1000	-
16.1(Temperature Index)	-	1000	-
17.1(IDENTIFICATION : Manufacturer’s Identification)	-	0	-
17.2(IDENTIFICATION : Cable Identification)	-	0	-
17.2.1(IDENTIFICATION : Cable Identification)	-	0	-
17.3(IDENTIFICATION : Cable Code)	-	0	-
15.1.e(Insulation resistance Test- Insulation resistance At Maximum rated temperature temperature)	-	500	-
15.1.e(Insulation resistance Test- Insulation resistance constant At Room temperature)	-	500	-
16.4(Flammability Test- Un affected portion)	-	0	-
16.4(Flammability Test- Period of Burning)	-	0	-
9.3(Minimum Thickness of Reduce core insulation)	-	0	-
9.2(Thickness of Reduce core insulation)	-	500	-
3.1 Table 2 IS 8130(Number of wires in the conductor)	-	0	-
Cl No. 16.10(Smoke density test)	-	800	-
Cl No. 16.8(Test for specific optical density of smoke)	-	0	-
Table 4(Copper purity test)	-	1500	-
Cl.8(Conductor, Number of wires.)	-	200	-
Cl.8(Conductor, Number of wires.)	-	0	-
Cl.8(Flexibility class)	-	0	-
[(Cl.15), (d), 2](After ageing, Elongation of Sheath [Percentage])	-	500	-
15.1.e(Insulation resistance Test- Volume Resistivity At Maximum rated temperature temperature)	-	500	-
15.1.e(Insulation resistance Test- Volume Resistivity At Room temperature)	-	500	For BIS Type test- 35200/- only. For BIS acceptance test- 30000/- only. For BIS routine test - 17000/- only. For others type test- 45500/- only.

-
included w.e.f 05.01.2026

1646

Mbis Tescon Private Limited

8190506

IS 8008 (2022)

Injection Moulded/Machined Polyethylene Fittings for Water Supply ï¿½ Specification ( Second Revision )

All variety upto size 500 mm

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Material)	-	14000	Fittings :20000, resin:7000,master batch :7000 for bis testing charges and for other 1.5 times of bis testing charges
5(COLOUR)	-	200	-
6.1(The nominal outside diameter)	-	200	-
6.2(Bends, tees, pipe ends and end caps designation)	-	200	-
7(WELD LENGTH)	-	200	-
8(VISUAL APPEARANCE)	-	200	-
9.1(DIMENSIONS OF FITTINGS)	-	2000	-
9.2(DIMENSIONS OF FITTINGS)	-	200	-
9.3(DIMENSIONS OF FITTINGS)	-	500	-
10.1.1(Length of Pipe for Welding Test)	-	10000	-
10.1.2(Sandwich Flange Hydraulic Testing)	-	500	-
10.2(Carbon Black Content and Dispersion)	-	3000	-
10.3(Melt Flow Rate)	-	1500	-
10.4(Density)	-	500	-
10.5(Oxidation Induction Time)	-	2500	-
10.6(Overall Migration)	-	2500	-
11.1(Type Tests)	-	0	-
11.2(Acceptance Tests)	-	0	-
4.2(Material)	-	0	-
4.1(Material)	-	0	-
4.2(Material)	-	0	-
4.3(Rework Material)	-	0	-

-
Included w.e.f 24.12.2025

1647

CIPET, Hajipur

5118334

IS 14151 : Part 2 (2008)

Irrigation equipment - Sprinkler pipes - Specification: Part 2 quick coupled polyethylene pipes and fittings (Second Revision)

38725 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.2.1 (Visual and Workmanship Requirement)	-	300	-
6.2, 6.2.1 (Quick Coupled Fittings)	-	6750.0	Density : 1000 (5002) Melt Flow Rate: 2200 (11002) Carbon Black Content: 1850 (9252) Carbon Black Dispersion:1400 (7002) Workmanship & Appearance: 300
6.1.3.2 (Quick coupled fittings)	-	0.0	-
6.1.3.1.1(Weldability Test)	-	6400.0	Acceptance Test: 1600 Quality Test: 4800
6.1.3, 6.1.3.1(Weldability Test)	-	0.0	-
6.1.2.2( Hydraulic Proof Test)	-	850.0	-
6.1.2, 6.1.2.1( Hydraulic Proof Test)	-	850.0	-
6.1(Quick Coupled Pipes and Fittings)	-	0.0	-
5.3(Dimensions of Quick Coupled Sprinkler Saddles Table 1.)	-	500.0	-
5.2(Dimensions of Quick Coupled Pump Connectors Table 3.)	-	0.0	-
4.2.7(Valve openers Table 1 of IS 8008 (Part 2))	-	0.0	-
4.2.7(Insert vatve couplers Table 1 of IS 8008 (Part 3))	-	0.0	-
4.2.7(End caps Table 1 of IS 8008 (Part 9))	-	0.0	-
4.2.7(Pipe ends Table 1 of IS 8008 (Part 6))	-	0.0	-
4.2.7(Ferrule reducers Table 1 of IS 8008 (Part 5))	-	0.0	-
4.2.7(Reducers Table 1 and 2 of IS 8008 (Part 4))	-	0.0	-
4.2.7(1 Dimensions of Quick Coupled Pipes and Fittings)	-	0.0	-
4.2.7(Quick Coupled ~pe HDPE Fittings)	-	0.0	-
4.2.6(Quick Coupled ~pe HDPE Fittings)	-	0.0	-
4.2.5(Quick Coupled ~pe HDPE Fittings)	-	0.0	-
4.2.4(Quick Coupled ~pe HDPE Fittings)	-	0.0	-
4.2.3(Quick Coupled ~pe HDPE Fittings)	-	0.0	-
4.2.2(Quick Coupled ~pe HDPE Fittings)	-	0.0	-
4.2.1(Quick Coupled ~pe HDPE Fittings)	-	0.0	-
4.1.5(Rubber Ring)	-	4950.0	Hardness before Ageing: 375.0 Ageing : 4200.0 Hardness after Ageing: 375.0
4.1.4(b)(Holding Attachments for Coupler Parts)	-	0.0	-
4.1.4(a)(Holding Attachments for Coupler Parts)	-	0.0	-
4.1 .3(Workmanship and Appearance)	-	300.0	-
4.1 .1.2.2(HDPE couplers)	-	0.0	-
4.1 .1.2.1(HDPE couplers)	-	0.0	-
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	700.0	-
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 10(Cabon Black Content)	-	925	-
4.1 (b)(HDPE couplers —)	-	0.0	-
4.1 (a)( Quick Coupled Male and Female Couplers)	-	0.0	-
4(QUICK COUPLED FITTINGS)	-	0.0	-
3(QUICK COUPLED PIPES)	-	17575.0	-
Cl.6.1.3(Weldability Test- b) Acceptance test)	-	1600	-
Cl.6.1.3(Weldability Test- a) Quality test)	-	4800	-
Cl 4.1.5(Rubber rings- C)Rubber ring shall be of black colour:)	-	300.0	-
Cl 4.1.5(Rubber rings- B) Change in hardness)	-	375	-
Cl 4.1.4(Holding attachments for coupler parts)	-	1700.0	850+850
Cl.4.1.3(Workmanship and appearance )	-	300.0	-
Cl.4.1(Quick Coupled Male and Female Couplers)	-	0.0	-

07 Oct, 2028

-
-

1648

CIPET, Hajipur

5118334

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

31869.0 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.10(Slow Crack Growth Rate)	-	6000.0	Testing Charges - 5500.0 Specimen Charges - 500.0
8.9 table-6(Elongation at Break)	-	1600.0	Testing Charges - 1100.0 Specimen Charges - 500.0
8.8(Tensile Strength for Butt-fusion)	-	1600.0	Testing Charges - 1100.0 Specimen Charges - 500.0
8.7(Density)	-	500.0	Nil
8.5 (Oxidation Induction Time)	-	2200.0	Nil
8.4( Melt Flow Rate)	-	1100.0	Nil
8.2(Longitudinal Reversion Test)	-	900.0	Testing Charges - 700.0 Specimen Charges - 200.0
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	1600.0	Nil
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	21400.0	Nil
7.4.1.2(Ovality)	-	0.0	Charges included in Dimension Test
Cl-7.4(Mean Outside Diameter (For upto 50 mm take 8 reading, above 50mm take 6 reading & average will be reported))	-	500.0	Dimension of Pipe (MOD, Ovality, Thickness, Length)
7.2(Length)	-	0.0	Charges included in Dimension
6.2.1(6.1.1 Identification Stripes)	-	250.0	Nil
6.2(Colour)	-	250.0	Nil
8.6(Overall migration)	-	2000.0	Testing Charges - 1700.0 Specimen Charges - 300.0
8.3(Carbon black)	-	1625.0	CBC - 925 CBD - 700

07 Oct, 2028

-
-

1649

CIPET, Hajipur

5118334

IS 15410 (2003)

Containers for packaging of natural mineral water and packaged drinking water - Specification

7463 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0 (chem)(MATERIAL)	-	1050	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.1 (chem)(Workmanship and Finish)	-	500	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.2 (chem)(Design, Shape & Dimension)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.3(Workmanship, Finish & Appearance)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.4 , clause 5 of IS:2798:1998(Brimful capacity in ml)	-	500	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.5, IS:2798:1998(Wall thickness- Bottom, in mm)	-	500	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.5, IS:2798:1998(Wall thickness- Middle , in mm)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.5, IS:2798:1998(Wall thickness- Top , in mm )	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.6.2(TRANSPARANCY)	-	700	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.6.3(LEAKAGE TEST)	-	1000	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.6.4(DROP TEST)	-	1100	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.6.5(MIGRATION TEST)	-	1700	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.6.6(PORTABILITY TEST)	-	2900	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.6.6 (chem)(Water Potability test (after 30 days) (a) Taste (b) Odour)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.6.5.1 (chem)(Colour migration (Caps))	-	0	Nil
4.6.5.1 (chem)(Colour migration (Container))	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.6.5 , IS:9845:1998 (chem)(Migration of Caps - a. Amount of extractive)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.6.5 , IS:9845:1998 (chem)(Migration- b. Amount of extractive)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.6.5 , IS:9845:1998 (chem)(Migration- a. Amount of extractive)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.6.3, clause 6 of IS:2798:1998(Leakage test- c. Air pressure leakage)	-	0.0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.6.3, clause 6 of IS:2798:1998(Leakage test- b. Vibration leakage)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.6.3, clause 6 of IS:2798:1998(Leakage test- a. Closure leakage )	-	0.0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.

07 Oct, 2028

-
-

1650

CIPET, Hajipur

5118334

IS 14887 (2014)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision)

19380 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Material Identification)	-	1050	-
3.2(Tapes – Width and Thickness ( IS 6192/IS 11197))	-	250	-
3.2(Tapes – Linear Density (IS 6192/IS 11197))	-	500	-
3.2(Tapes – Tenacity (IS 6192/IS 11197))	-	500	-
3.2(Tapes – Elongation at point of rupture (IS 6192/IS 11197))	-	1100	-
3.2(Tapes – Heat Shrinkage (HDPE) (Cl. 3.2 and IS 6192))	-	1100	-
3.2(Tapes – Colour Fastness for pigmented tapes (IS 6192/IS 11197))	-	850	-
3.2(Tapes – Dimensional stability (PP) (IS 11197))	-	900	-
3.2(Unlaminated Fabric Mass )	-	250	-
3.3.1(Bottom seam (IS 10789))	-	250	-
4.1 and 3.4(Mass of bale (Cl. 4.1), Capacity (Cl 3.4))	-	250	-
4.2 and Table 1 ii(Dimensions )	-	250	-
5.2 and Table 1 iii(Ends per dm )	-	250	-
5.2 and Table 1 iv(Picks per dm )	-	250	-
4.2 and Table 1 v(Mass of sack )	-	250	-
4.2 and Table 1 vi(Average breaking strength of fabric )	-	2200	-
4.2 and Table 1 vi(Breaking strength of bottom seam )	-	1100	-
4.2 and Table 1 viii(Elongation at break of fabric )	-	2200	-
4.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	12380	-
4.2 and Table 1 x(Ash content )	-	950	-

07 Oct, 2028

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number