BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15634 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

1591

BIS, Central Laboratory (CL)

None

IS 797 (2023)

COMMON SALT FOR CHEMICAL INDUSTRIES SPECIFICATION

Please check the remarks View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-4.1 (Description)	-
Cl-4.2 (Moisture Content)	-
Cl-4.3, Table-1 (i) (Sodium chloride (as NaCl), percent by mass, Min)	-
Cl-4.3, Table-1 (ii) (Matter insoluble in water, percent by mass, Max)	-
Cl-4.3, Table-1 (iii) (Calcium salts (as Ca), percent by mass, Max)	-
Cl-4.3, Table-1 (iv) (Magnesium salts (as Mg), percent by mass, Max)	-
Cl-4.3, Table-1 (v) (Sulphates (as SO4 ), percent by mass, Max)	-
Cl-4.3, Table-1 (vi) (Iron compound (as Fe), ppm, Max)	-

-
-

1592

CIMEC Infralabs Private Limited

8195606

IS 3087 (2025)

Medium Density Particle Boards of Wood and other Lignocellulosic Materials for General Purpose - Specification ( Third Revision )

Regular Grade: A and B, Moisture Resistance: MR and HMR grade

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 7(Finish --IS 2380 (Part 2), IS 2380 (Part 3) & Visual)	-	500	-
As per Clause 8, Table 2(Length -IS 2380 (Part 2))	-	500	-
As per Clause 8, Table 2(Width - IS 2380 (Part 2))	-	500	-
As per Clause 8, Table 2(Thickness, Sanded/finished panel - IS 2380 (Part 2))	-	500	-
As per Clause 8, Table 2(Squareness, Max. - IS 2380 (Part 2))	-	500	-
As per Clause 8, Table 2(Edge straightness, Max. -IS 2380 (Part 2))	-	500	-
As per Clause 9.1 Table 3(Density -IS 2380 (Part 3))	-	500	-
As per Clause 9.1 Table 3(Variation from mean density, --IS 2380 (Part 3))	-	500	-
As per Clause 9.1 Table 3(Moisture Content -IS 2380 (Part 3))	-	750	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Modulus of rupture (MoR), Min.-IS 2380 (Part 4))	-	1500	-
As per Clause 9.1 Table 4, Table 6, Table 7(Modulus of elasticity (MoE), Min. -(IS 2380 (Part 4))	-	1500	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table7(Internal bond strength, Min. - IS 2380 (Part 5))	-	1500	-
As per Clause 9.1 Table 6, Table 7(24 h thickness swelling (due to general absorption) Max. - IS 2380 (Part 17))	-	1000	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Screw withdrawal strength (face) , Min. -IS 2380 (Part 4))	-	1000	-
As per Clause 9.1 Table 4, Table 5, table 6, Table 7(Screw withdrawal strength (edge) , Min. -IS 2380 (Part 4))	-	1000	-
As per Clause 9.1 , Table 6, Table 7(Moisture Resistance : Option 1 : Cyclic test (1. )Internal bond strength Min. -IS 2380 (Part 5) see note 1)	-	1000	-
As per Clause 9.1 , Table 9(Formaldehyde content Fc, mg/100 g for oven dry board -IS 13745)	-	1500	-

14 Jan, 2029

-
-

1593

HEXIQON LABORATORY PRIVATE LIMITED, AHMEDABAD

7167306

IS 15622 (2017)

Pressed Ceramic Tiles - Specification (First Revision)

Glazed and Unglazed, Floor and Wall

29000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5& 5.1, Table 1(Coordinating size- IS 13630(pt-1))	-	200	NA
5& 5.1, Table 1(Work size- IS 13630(pt-1))	-	200	NA
5& 5.1, Table 1(Thickness- IS 13630(pt-1))	-	200	NA
5& 5.1, Table 2(Nominal size -IS 13630(pt-1))	-	200	NA
5& 5.1, Table 2(Work size-IS 13630(pt-1))	-	200	NA
5& 5.1, Table 2(Thickness- IS 13630(pt-1))	-	200	NA
5& 5.1, Table 3(Coordinating size- IS 13630(pt-1))	-	200	NA
5& 5.1, Table 3(Work size-IS 13630(pt-1))	-	200	NA
5& 5.1, Table 3(Thickness- IS 13630(pt-1))	-	200	NA
5& 5.1, Table 4(Nominal size-IS 13630(pt-1))	-	200	NA
5& 5.1, Table 4(Work size-IS 13630(pt-1))	-	200	NA
5& 5.1, Table 4(Thickness- IS 13630(pt-1))	-	200	NA
6 table 5, i a (Length-IS 13630(pt-1))	-	1000	NA
6 table 5,i a (width-IS 13630(pt-1))	-	1000	NA
6 table 5, i b (Thickness- IS 13630(pt-1))	-	1000	NA
6 table 5, i c(Straigthness of side-IS 13630(pt-1))	-	1500	NA
6 table 5, i d(Rectangularity-IS 13630(pt-1))	-	1500	NA
6 table 5, i e(Surface flatness-IS 13630(pt-1))	-	2000	NA
6 table 5, i f(Surface quality-IS 13630(pt-1))	-	200	NA
6 table 5, ii a(Water Absorption-IS 13630(pt-2))	-	1500	NA
6 table 5, ii b(Module of rupture -IS 13630(pt-6))	-	700	NA
6 table 5, ii c(Bending Strength-IS 13630(pt-6))	-	700	NA
6 table 5, ii d(Moisture Expension-IS 13630(pt-3))	-	1500	NA
6 table 5, ii e(Scratch hardness of surface -IS 13630(pt-13))	-	500	NA
6 table 5, ii f(Coefficient of linear tharmal expansion from ambient temperature to100°C-IS 13630(pt-4) )	-	2000	NA
6 table 5, ii g(Thermal shock resistance IS 13630(pt-5))	-	2000	NA
6 table 5, ii h(Impact resistance-IS 13630(pt-14))	-	1000	NA
6 table 5, ii j(Co-efficient of friction-tiles intended for used on floor )	-	500	NA
6 table 5, ii k(Crazing resistance-IS 13630(pt-9))	-	2500	NA
6 table 5, ii m(resistance to surface abrasion of glazed Tilles)	-	2000	NA
6 table 5, iii a(Resistance to staining of glazed Tilles-IS 13630(pt-8))	-	300	NA
6 table 5, iii b(Resistance to household chemicals and swimming pool water cleansers agents containing hydrofluoric acid and its compound-IS 13630(pt-8))	-	500	NA
6 table 5, iii c(Resistance to acid and alkalis (with the exception ofhydrofluoric acid and its compounds – Glazed tiles-IS 13630(pt-8))	-	500	NA
6 table 6, i a (Length-IS 13630(pt-1))	-	1000	NA
6 table 6, i a (width-IS 13630(pt-1))	-	1000	NA
6 table 6, i b (Thickness-IS 13630(pt-1))	-	1000	NA
6 table 6, i c(Straigthness of side-IS 13630(pt-1))	-	1500	NA
6 table 6, i d(Rectangularity-IS 13630(pt-1))	-	1500	NA
6 table 6, i e(Surface flatness-IS 13630(pt-1))	-	2000	NA
6 table 6, i f(Surface quality-IS 13630(pt-1))	-	200	NA
6 table 6, ii a(Water Absorption-IS 13630(pt-2) )	-	1500	NA
6 table 6, ii b(Module of rupture -IS 13630(pt-6))	-	700	NA
6 table 6, ii c(Bending Strength-IS 13630(pt-6))	-	700	NA
6 table 6, ii d(Moisture Expension-IS 13630(pt-3))	-	1500	NA
6 table 6, ii e(Scratch hardness of surface-IS 13630(pt-13) )	-	500	NA
5 table 6, ii f(Resistance to surface abrasion of glazed Tilles)	-	2000	NA
6 table 6, ii g(Coefficient of linear tharmal expansion from ambient temperature to100°C-IS13630(pt-4) )	-	2000	NA
6 table 6, ii h(Thermal shock resistance-IS13630(pt-5) )	-	2000	NA
6 table 6, ii j(Crazing resistance-IS 13630(pt-9))	-	2500	NA
6 table 6, ii k(Impact resistance-IS 13630(pt-14))	-	1000	NA
6 table 6, ii m(Co-efficient of friction-tiles intended for used on floor )	-	500	NA
6 table 6, ii n(Forst resistance-IS 13630(pt-10))	-	4000	NA
6 table 6, ii p(Resistance to deep abrasion of unglazed tiles)	-	2000	NA
6 table 6, iii a(Resistance to staining of glazed Tilles)	-	300	NA
6 table 6, iii b(Resistance to household chemicals and swimming pool water cleansers agents containing hydrofluoric acid and its compound)	-	500	NA
6 table 6, iii c(Resistance to acid and alkalis (with the exception of hydrofluoric acid and its compounds – Glazed tiles)	-	500	NA
6 table 7, i a (Length-IS 13630(pt-1))	-	1000	NA
6 table 7, i a (width-IS 13630(pt-1))	-	1000	NA
6 table 7, i b (Thickness-IS 13630(pt-1))	-	1000	NA
6 table 7, i c(Straigthness of side-IS 13630(pt-1))	-	1500	NA
6 table 7, i d(Rectangularity-IS 13630(pt-1))	-	1500	NA
6 table 7, i e(Surface flatness-IS 13630(pt-1))	-	2000	NA
6 table 7, i f(Surface quality-IS 13630(pt-1))	-	200	NA
6 table 7, ii a(Water Absorption-IS 13630(pt-2) )	-	1500	NA
6 table 7, ii b(Module of rupture-IS 13630(pt-6) )	-	700	NA
6 table 7, ii c(Bending Strength-IS 13630(pt-6))	-	700	NA
6 table 7, ii d(Moisture Expension-IS 13630(pt-3))	-	1500	NA
6 table 7, ii e(Scratch hardness of surface-IS 13630(pt-13))	-	300	NA
6 table 7, ii f(Resistance to surface abrasion of glazed Tilles)	-	2000	NA
6 table 7, ii g(Coefficient of linear tharmal expansion from ambient temperature to100°C-IS13630(pt-4) )	-	2000	NA
6 table 7, ii h(Thermal shock resistance-IS13630(pt-5) )	-	2000	NA
6 table 7, ii j(Crazing resistance-IS 13630(pt-9))	-	2500	NA
6 table 7, ii k(Impact resistance-IS 13630(pt-14))	-	1000	NA
6 table 7, ii m(Co-efficient of friction-tiles intended for used on floor )	-	500	NA
6 table 7, ii n(Forst resistance-IS 13630(pt-10))	-	4000	NA
6 table 7, ii p(Resistance to deep abrasion of unglazed tiles)	-	2000	NA
6 table 7, iii a(Resistance to staining of glazed Tilles)	-	300	NA
6 table 7, iii b(Resistance to household chemicals and swimming pool water cleansers agents containing hydrofluoric acid and its compound)	-	500	NA
6 table 7, iii c(Resistance to acid and alkalis (with the exception of hydrofluoric acid and its compounds – Glazed tiles)	-	500	NA
6 table 8, i a (Length-IS 13630(pt-1))	-	1000	NA
6 table 8, i a (width-IS 13630(pt-1))	-	1000	NA
6 table 8, i b (Thickness-IS 13630(pt-1))	-	1000	NA
6 table 8, i c(Straigthness of side-IS 13630(pt-1))	-	1500	NA
6 table 8, i d(Rectangularity-IS 13630(pt-1))	-	1500	NA
6 table 8, i e(Surface flatness-IS 13630(pt-1))	-	2000	NA
6 table 8, i f(Surface quality-IS 13630(pt-1))	-	200	NA
6 table 8, ii a(Water Absorption-IS 13630(pt-6) )	-	1500	NA
6 table 8, ii b(Module of rupture-IS 13630(pt-6) )	-	700	NA
6 table 8, ii c(Bending Strength-IS 13630(pt-6))	-	700	NA
6 table 8, ii d(Moisture Expension-IS 13630(pt-3))	-	1500	NA
6 table 8, ii e(Scratch hardness of surface-IS 13630(pt-13) )	-	300	NA
6 table 8, ii f(Resistance to surface abrasion of glazed Tilles)	-	2000	NA
6 table 8, ii g(Coefficient of linear tharmal expansion from ambient temperature to100°C-IS 13630(pt-4) )	-	2000	NA
6 table 8, ii h(Thermal shock resistance-IS 13630(pt-5) )	-	2000	NA
6 table 8, ii j(Crazing resistance-IS 13630(pt-9))	-	2500	NA
6 table 8, ii k(Impact resistance-IS 13630(pt-14))	-	1000	NA
6 table 8, ii m(Co-efficient of friction-tiles intended for used on floor )	-	500	NA
6 table 8, ii n(Forst resistance-IS 13630(pt-10))	-	4000	NA
6 table 8, ii p(Resistance to deep abrasion of unglazed tiles)	-	2000	NA
6 table 8, ii q(Bulk Density-IS13630(pt-2))	-	1500	NA
6 table 8, iii a(Resistance to staining of glazed Tilles)	-	300	NA
6 table 8 iii b(Resistance to household chemicals and swimming pool water cleansers agents containing hydrofluoric acid and its compound)	-	500	NA
6 table 8, iii c(Resistance to acid and alkalis (with the exception of hydrofluoric acid and its compounds – Glazed tiles)	-	500	NA
6 table 9, i a (Length-IS 13630(pt-1))	-	1000	NA
6 table 9, i a (width-IS 13630(pt-1))	-	1000	NA
6 table 9, i b (Thickness-IS 13630(pt-1))	-	1000	NA
6 table 9, i c(Straigthness of side-IS 13630(pt-1))	-	1500	NA
6 table 9, i d(Rectangularity-IS 13630(pt-1))	-	1500	NA
6 table 9, i e(Surface flatness-IS 13630(pt-1))	-	2000	NA
6 table 9, i f(Surface quality-IS 13630(pt-1))	-	200	NA
6 table 9, ii a(Water Absorption-IS 13630(pt-6) )	-	1500	NA
6 table 9, ii q(Bulk Density-)	-	1500	NA
6 table 9, ii b(Module of rupture-IS 13630(pt-6) )	-	700	NA
6 table 9, ii c(Bending Strength-IS 13630(pt-6))	-	700	NA
6 table 9, ii d(Moisture Expension-IS 13630(pt-3))	-	1500	NA
6 table 9, ii e(Scratch hardness of surface-IS 13630(pt-13) )	-	300	NA
6 table 9, ii f(Resistance to surface abrasion of glazed Tilles)	-	2000	NA
6 table 9, ii g(Coefficient of linear tharmal expansion from ambient temperature to100°C )	-	2000	NA
6 table 9, ii h(Thermal shock resistance-IS 13630(pt-5))	-	2000	NA
6 table 9, ii j(Crazing resistance-IS 13630(pt-9))	-	2500	NA
6 table 9, ii k(Impact resistance-IS 13630(pt-14))	-	1000	NA
6 table 8, ii m(Co-efficient of friction-tiles intended for used on floor )	-	500	NA
6 table 9, ii n(Forst resistance-IS 13630(pt-10))	-	4000	NA
6 table 9, ii p(Resistance to deep abrasion of unglazed tiles)	-	2000	NA
6 table 9, iii a(Resistance to staining )	-	500	NA
6 table 9 iii b(Resistance to household chemicals and swimming pool water cleansers agents containing hydrofluoric acid and its compound)	-	1500	NA
6 table 9, iii c(Resistance to acid and alkalis (with the exception of hydrofluoric acid and its compounds – Glazed tiles)	-	2000	NA
6.0, Table 5 - 9 & SI No. - 1E(3)(Warpage)	-	1000	-
6.0, Table 5 - 9 & SI No. - 1E(2)(Edge Curveture)	-	1000	-
CLAUSE NO. 5.2(Shapes and Sizes)	-	100	-
5.3(Spacer Lug)	-	100	-
As per Clause 6 Table 5 SI No. (ii) (j)(Slip Resistance / Co-efficient of friction -- Measurement of surface frictional porperties of tiles intended for use on floors)	-	2000	-
As per Clause 6 Table 5 SI No. (iii) (d)(Determination of lead and cadmium given off by Glazed Tiles)	-	5000	-
As per Clause 6 Table 6 SI No. (ii) (m)(Slip Resistance / Co-efficient of friction -- Measurement of surface frictional porperties of tiles intended for use on floors)	-	2000	-
As per Clause 6 Table 6 SI No. (iii) (d)(Determination of lead and cadmium given off by Glazed Tiles)	-	5000	-
As per Clause 6 Table 7 SI No. (ii) (m)(Slip Resistance / Co-efficient of friction -- Measurement of surface frictional porperties of tiles intended for use on floors)	-	2000	-
As per Clause 6 Table 7 SI No. (iii) (d)(Determination of lead and cadmium given off by Glazed Tiles)	-	5000	-
As per Clause 6 Table 8 SI No. (ii) (m)(Slip Resistance / Co-efficient of friction -- Measurement of surface frictional porperties of tiles intended for use on floors)	-	2000	-
As per Clause 6 Table 8 SI No. (iii) (d)(Determination of lead and cadmium given off by Glazed Tiles)	-	5000	-
As per Clause 6 Table 9 SI No. (ii) (m)(Slip Resistance / Co-efficient of friction -- Measurement of surface frictional porperties of tiles intended for use on floors)	-	2000	-
As per Clause 6 Table 9 SI No. (iii) (d)(Determination of lead and cadmium given off by Glazed Tiles)	-	5000	-

07 Feb, 2030

-
Amendment No. 2 included w.e.f. 20-02-2026

1594

INDIAN TESTING LABORATORY PRIVATE LIMITED, GREATER NOIDA

8171306

IS 12823 (2025)

Prelaminated Medium Density Particle Boards from Wood and other Lignocellulosic Material Specification (Second Revision)

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 5(Material - IS 3087)	-	500	-
As per Clause 8 Table 2(Length -IS 2380 (Part 2))	-	500	-
As per Clause 8 Table 2(Width - IS 2380 (Part 2))	-	500	-
As per Clause 8 Table 2(Thickness - IS 2380 (Part 2))	-	500	-
As per Clause 8 Table 2(Squareness, Max -IS 2380 (Part 2))	-	500	-
As per Clause 8 Table 2(Edge Straighness, Max - IS 2380 (Part 2))	-	500	-
As per Clause 9.1 Table 3(Density -IS 2380 (Part 3))	-	500	-
As per Clause 9.1 Table 3(Variation from mean density, --IS 2380 (Part 3))	-	500	-
As per Clause 9.1 Table 3(Moisture Content -IS 2380 (Part 3))	-	500	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Modulus of rupture (MoR), Min.-IS 2380 (Part 4))	-	1000	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table7(Internal bond strength, Min. - IS 2380 (Part 5))	-	500	-
As per Clause 9.1 Table 6, Table 7(24 h thickness swelling (due to general absorption) Max. - IS 2380 (Part 17))	-	500	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Screw withdrawal strength (face) , Min. -IS 2380 (Part 4))	-	500	-
As per Clause 9.1 Table 4, Table 5, table 6, Table 7(Screw withdrawal strength (edge) , Min. -IS 2380 (Part 4))	-	500	-
As per Clause 9.1 , Table 6, Table 7(Moisture Resistance : Option 1 : Cyclic test (1. )Internal bond strength Min. -IS 2380 (Part 5) see note 1)	-	500	-
As per Clause 9.1 , Table 6, Table 7(Moisture Resistance : Option 2 : Boil test (1.) Internal bond strength , Min.- IS 2380 (Part 5) see note 2)	-	500	-
As per Clause 9.1 , Table 8(Abrasion resistance in number of revolutions Min. --Annex. B)	-	500	-
As per Clause 9.1 , Table 8(Resiatnce to stream/water vapour - Annex. C)	-	500	-
As per Clause 9.1 , Table 8(Resitance to crack -Annex. D)	-	500	-
As per Clause 9.1 , Table 8(Resistance to cigarette burn -Annex. E)	-	500	-
As per Clause 9.1 , Table 8(Resiatnce to stain - Annex. F)	-	500	-
As per Clause 9.1 , Table 9(Formaldehyde content Fc, mg/100 g for oven dry board -IS 13745)	-	500	-
As per Clause 9.1 , Table 9(Steady-state formaldehyde emission, Fc, mg/m3 (optional test))	-	500	-
As per Clause 9.1 Table 4, Table 6, Table 7(Modulus of elasticity (MoE), Min. -(IS 2380 (Part 4))	-	500	-
As per Clause 5(Material - IS 3087)	-	0	-
As per Clause 8 Table 2(Length -IS 2380 (Part 2))	-	0	-
As per Clause 8 Table 2(Width - IS 2380 (Part 2))	-	0	-
As per Clause 8 Table 2(Thickness - IS 2380 (Part 2))	-	0	-
As per Clause 8 Table 2(Squareness, Max -IS 2380 (Part 2))	-	0	-
As per Clause 8 Table 2(Edge Straighness, Max - IS 2380 (Part 2))	-	0	-
As per Clause 9.1 Table 3(Density -IS 2380 (Part 3))	-	0	-
As per Clause 9.1 Table 3(Variation from mean density, --IS 2380 (Part 3))	-	0	-
As per Clause 9.1 Table 3(Moisture Content -IS 2380 (Part 3))	-	0	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Modulus of rupture (MoR), Min.-IS 2380 (Part 4))	-	0	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table7(Internal bond strength, Min. - IS 2380 (Part 5))	-	0	-
As per Clause 9.1 Table 6, Table 7(24 h thickness swelling (due to general absorption) Max. - IS 2380 (Part 17))	-	0	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Screw withdrawal strength (face) , Min. -IS 2380 (Part 4))	-	0	-
As per Clause 9.1 Table 4, Table 5, table 6, Table 7(Screw withdrawal strength (edge) , Min. -IS 2380 (Part 4))	-	0	-
As per Clause 9.1 , Table 6, Table 7(Moisture Resistance : Option 1 : Cyclic test (1. )Internal bond strength Min. -IS 2380 (Part 5) see note 1)	-	0	-
As per Clause 9.1 , Table 6, Table 7(Moisture Resistance : Option 2 : Boil test (1.) Internal bond strength , Min.- IS 2380 (Part 5) see note 2)	-	0	-
As per Clause 9.1 , Table 8(Abrasion resistance in number of revolutions Min. --Annex. B)	-	0	-
As per Clause 9.1 , Table 8(Resiatnce to stream/water vapour - Annex. C)	-	0	-
As per Clause 9.1 , Table 8(Resitance to crack -Annex. D)	-	0	-
As per Clause 9.1 , Table 8(Resistance to cigarette burn -Annex. E)	-	0	-
As per Clause 9.1 , Table 8(Resiatnce to stain - Annex. F)	-	0	-
As per Clause 9.1 , Table 9(Formaldehyde content Fc, mg/100 g for oven dry board -IS 13745)	-	0	-
As per Clause 9.1 , Table 9(Steady-state formaldehyde emission, Fc, mg/m3 (optional test))	-	0	-
As per Clause 9.1 Table 4, Table 6, Table 7(Modulus of elasticity (MoE), Min. -(IS 2380 (Part 4))	-	0	-

15 Aug, 2028

-
Included w.e.f 09.03.2026

1595

SWASTIK ELECTRONICS TESTING CENTRE (OPC) PVT. LTD., GHAZIABAD

8163826

IS 16103 : Part 1 (2025)

LED Modules for General Lighting Part 1 Safety Specifications (First Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6(Marking)	-	500	N/A
Cl-7.1(Integral terminals)	-	1000	N/A
Cl-7.2(Terminals other than integral terminals)	-	1000	N/A
Cl-8(Earthing)	-	1000	N/A
Cl-9(Protection against accidental contact with live parts)	-	1000	N/A
Cl-10(Moisture resistance and insulation)	-	2500	N/A
Cl-11(Electric strength)	-	2000	N/A
Cl-12.1(Fault conditions- General)	-	2000	N/A
Cl-12.2(Overpower condition)	-	2000	N/A
Cl-13(Conformity testing during manufacture)	-	1000	N/A
Cl-15(Creepage distances and clearances)	-	2000	N/A
Cl-16(Screws, current-carrying parts and connections)	-	1000	N/A
Cl-17(Resistance to heat, fire and tracking)	-	2000	N/A
Cl-18(Resistance to corrosion)	-	2000	N/A
Cl-19(Information for luminaire design)	-	1000	N/A
Cl-20.1(Heat management- General)	-	1000	N/A
Cl-20.2(Thermal interface material)	-	1000	N/A
Cl-20.3(Heat protection)	-	1000	N/A
Cl-21.1(UV radiation)	-	0	N/A
Cl-21.2(Blue light hazard)	-	0	N/A

15 May, 2028

-
1 Cl-21.1 (UV radiation) UV Radiation As per IEC 62471:2006 2 Cl-21.2 (Blue light hazard) Blue light hazard As per IEC TR 62778:2014.

1596

PIONEER TESTING LABORATORY PRIVATE LIMITED

8176806

IS 7466 (2023)

Rubber Gasket for Pressure Cooker ï¿½ Specification ( Second Revision )

All Type

19400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No. 3(Types)	-	200	-
Cl. No. 4.1(Material)	-	500	-
Cl. No. 4.2(Workmanship and Finish)	-	200	-
Cl. No. 4.3(Dimensions)	-	500	-
Cl. No. 4.4, table no. 1(i)(Hardness)	-	500	-
Cl. No. 4.4, table no. 1(ii)(Tensile strength)	-	1000	-
Cl. No. 4.4, table no. 1(iii)(Elongation at break)	-	1000	-
Cl. No. 4.4, table no. 1(iv)("Hardness, Tensile strength, Elongation at break)	-	2500	-
Cl. No. 4.4, table no. 1(v)("Hardness, Tensile strength, Elongation at break percent")	-	0	-
Cl. No. 4.4, table no. 1(vi)(Change in volume)	-	1000	-
Cl. No. 4.4, table no. 1(vii)(Compression set)	-	1000	-
Cl. No. 4.4, table no. 1(viii)(Discolouration)	-	500	-
Cl. No. 4.4, table no. 1(ix)(Odour and taste)	-	500	-
Cl. No. 4.4, table no. 1(x)(Volatile matter)	-	1000	-
Cl. No. 4.4, table no. 1(xi)("Total zinc oxide, percent by mass, ")	-	1000	-
Cl. No. 4.4, table no. 1(xii)(N-Nitrosamines,)	-	1000	-
Cl. No. 4.4, table no. 1(xiii)(N-Nitrosatables)	-	0	-
Cl. No. 4.4, table no. 1(xv)("Polycyclic aromatic hydrocarbons (PAH) Benzo(a)pyrene (BaP)" Extractables)	-	1000	-
Cl. No. 4.4, table no. 1(xv)("Polycyclic aromatic hydrocarbons (PAH) Benzo(a)pyrene (BaP)")	-	0	-
Cl. No. 4.5, Table no. 2(i)(Antimony)	-	500	-
Cl. No. 4.5, Table no. 2(ii)(Arsenic)	-	500	-
Cl. No. 4.5, Table no. 2(iii)(Chromium)	-	500	-
Cl. No. 4.5, Table no. 2(iv)(Mercury)	-	500	-
Cl. No. 4.5, Table no. 2(v)(Cadmium)	-	500	-
Cl. No. 4.5, Table no. 2(vi)(Lead)	-	500	-
Cl. No. 4.5, Table no. 2(vii)(Barium)	-	500	-
Cl. No. 4.5, Table no. 2(viii)(Selenium)	-	500	-
Cl. No.4.6(Performance test)	-	500	-
Cl. No. 4.7(Quality of Reagent)	-	500	-
Cl. No. 5(Packing and Marking)	-	500	-
Cl. No. 3(TYPES)	-	500	-
Cl. No. 4.1(Material)	-	0	-
Cl. No. 4.2(Workmanship and Finish)	-	0	-
Cl. No. 4.3(Dimensions)	-	0	-
Cl. No. 4.4, table no. 1(i)(Hardness)	-	0	-
Cl. No. 4.4, table no. 1(ii)(Tensile strength)	-	0	-
Cl. No. 4.4, table no. 1(iii)(Elongation at break)	-	0	-
Cl. No. 4.4, table no. 1(iv)(Hardness, Tensile strength, Elongation at break percent)	-	0	-
Cl. No. 4.4, table no. 1(v)(Hardness, Tensile strength, Elongation at break percent)	-	0	-
Cl. No. 4.4, table no. 1(vi)(Change in volume)	-	0	-
Cl. No. 4.4, table no. 1(vii)(Compression set)	-	0	-
Cl. No. 4.4, table no. 1(viii)(Discolouration)	-	0	-
Cl. No. 4.4, table no. 1(ix)(Odour and taste)	-	0	-
Cl. No. 4.4, table no. 1(x)(Volatile matter)	-	0	-
Cl. No. 4.4, table no. 1(xi)(Total zinc oxide, percent by mass, )	-	0	-
Cl. No. 4.4, table no. 1(xii)(N-Nitrosamines,)	-	0	-
Cl. No. 4.4, table no. 1(xiii)(N-Nitrosatables)	-	0	-
Cl. No. 4.4, table no. 1(xiv)(Extractables)	-	0	-
Cl. No. 4.4, table no. 1(xv)(Polycyclic aromatic hydrocarbons (PAH) Benzo(a)pyrene (BaP))	-	0	-
Cl. No. 4.5, Table no. 2(i)(Antimony)	-	0	-
Cl. No. 4.5, Table no. 2(ii)(Arsenic)	-	0	-
Cl. No. 4.5, Table no. 2(iii)(Chromium)	-	0	-
Cl. No. 4.5, Table no. 2(iv)(Mercury)	-	0	-
Cl. No. 4.5, Table no. 2(v)(Cadmium)	-	0	-
Cl. No. 4.5, Table no. 2(vi)(Lead)	-	0	-
Cl. No. 4.5, Table no. 2(vii)(Barium)	-	0	-
Cl. No. 4.5, Table no. 2(viii)(Selenium)	-	0	-
Cl. No.4.6(performance test)	-	0	-
Cl. No. 4.7(Quality of Reagent)	-	0	-
Cl. No. 5(PACKING AND MARKING)	-	0	-
Cl. No. 3(TYPES)	-	0	-
Cl. No. 4.1(Material)	-	0	-
Cl. No. 4.2(Workmanship and Finish)	-	0	-
Cl. No. 4.3(Dimensions)	-	0	-
Cl. No. 4.4, table no. 1(i)(Hardness)	-	0	-
Cl. No. 4.4, table no. 1(ii)(Tensile strength)	-	0	-
Cl. No. 4.4, table no. 1(iii)(Elongation at break)	-	0	-
Cl. No. 4.4, table no. 1(iv)(Hardness, Tensile strength, Elongation at break percent)	-	0	-
Cl. No. 4.4, table no. 1(v)(Hardness, Tensile strength, Elongation at break percent)	-	0	-
Cl. No. 4.4, table no. 1(vi)(Change in volume)	-	0	-
Cl. No. 4.4, table no. 1(vii)(Compression set)	-	0	-
Cl. No. 4.4, table no. 1(viii)(Discolouration)	-	0	-
Cl. No. 4.4, table no. 1(ix)(Odour and taste)	-	0	-
Cl. No. 4.4, table no. 1(x)(Volatile matter)	-	0	-
Cl. No. 4.4, table no. 1(xi)(Total zinc oxide, percent by mass, )	-	0	-
Cl. No. 4.4, table no. 1(xii)(N-Nitrosamines,)	-	0	-
Cl. No. 4.4, table no. 1(xiii)(N-Nitrosatables)	-	0	-
Cl. No. 4.4, table no. 1(xiv)(Extractables)	-	0	-
Cl. No. 4.4, table no. 1(xv)(Polycyclic aromatic hydrocarbons (PAH) Benzo(a)pyrene (BaP))	-	0	-
Cl. No. 4.5, Table no. 2(i)(Antimony)	-	0	-
Cl. No. 4.5, Table no. 2(ii)(Arsenic)	-	0	-
Cl. No. 4.5, Table no. 2(iii)(Chromium)	-	0	-
Cl. No. 4.5, Table no. 2(iv)(Mercury)	-	0	-
Cl. No. 4.5, Table no. 2(v)(Cadmium)	-	0	-
Cl. No. 4.5, Table no. 2(vi)(Lead)	-	0	-
Cl. No. 4.5, Table no. 2(vii)(Barium)	-	0	-
Cl. No. 4.5, Table no. 2(viii)(Selenium)	-	0	-
Cl. No.4.6(performance test )	-	0	-
Cl. No. 4.7(Quality of Reagent)	-	0	-
Cl. No. 5(PACKING AND MARKING)	-	0	-
Cl. No. 3(Types)	-	-	-
Cl. No. 4.1(Material)	-	-	-
Cl. No. 4.2(Workmanship and Finish)	-	-	-
Cl. No. 4.3(Dimensions)	-	-	-
Cl. No. 4.4, table no. 1(i)(Hardness)	-	-	-
Cl. No. 4.4, table no. 1(ii)(Tensile strength)	-	-	-
Cl. No. 4.4, table no. 1(iii)(Elongation at break)	-	-	-
Cl. No. 4.4, table no. 1(iv)("Hardness, Tensile strength, Elongation at break)	-	-	-
Cl. No. 4.4, table no. 1(v)("Hardness, Tensile strength, Elongation at break percent")	-	-	-
Cl. No. 4.4, table no. 1(vi)(Change in volume)	-	-	-
Cl. No. 4.4, table no. 1(vii)(Compression set)	-	-	-
Cl. No. 4.4, table no. 1(viii)(Discolouration)	-	-	-
Cl. No. 4.4, table no. 1(ix)(Odour and taste)	-	-	-
Cl. No. 4.4, table no. 1(x)(Volatile matter)	-	-	-
Cl. No. 4.4, table no. 1(xi)("Total zinc oxide, percent by mass, ")	-	-	-
Cl. No. 4.4, table no. 1(xii)(N-Nitrosamines,)	-	-	-
Cl. No. 4.4, table no. 1(xiii)(N-Nitrosatables)	-	-	-
Cl. No. 4.4, table no. 1(xv)("Polycyclic aromatic hydrocarbons (PAH) Benzo(a)pyrene (BaP)" Extractables)	-	-	-
Cl. No. 4.4, table no. 1(xv)("Polycyclic aromatic hydrocarbons (PAH) Benzo(a)pyrene (BaP)")	-	-	-
Cl. No. 4.5, Table no. 2(i)(Antimony)	-	-	-
Cl. No. 4.5, Table no. 2(ii)(Arsenic)	-	-	-
Cl. No. 4.5, Table no. 2(iii)(Chromium)	-	-	-
Cl. No. 4.5, Table no. 2(iv)(Mercury)	-	-	-
Cl. No. 4.5, Table no. 2(v)(Cadmium)	-	-	-
Cl. No. 4.5, Table no. 2(vi)(Lead)	-	-	-
Cl. No. 4.5, Table no. 2(vii)(Barium)	-	-	-
Cl. No. 4.5, Table no. 2(viii)(Selenium)	-	-	-
Cl. No.4.6(Performance test)	-	-	-
Cl. No. 4.7(Quality of Reagent)	-	-	-
Cl. No. 5(Packing and Marking)	-	-	-
Cl. No. 3(TYPES)	-	-	-
Cl. No. 4.1(Material)	-	-	-
Cl. No. 4.2(Workmanship and Finish)	-	-	-
Cl. No. 4.3(Dimensions)	-	-	-
Cl. No. 4.4, table no. 1(i)(Hardness)	-	-	-
Cl. No. 4.4, table no. 1(ii)(Tensile strength)	-	-	-
Cl. No. 4.4, table no. 1(iii)(Elongation at break)	-	-	-
Cl. No. 4.4, table no. 1(iv)(Hardness, Tensile strength, Elongation at break percent)	-	-	-
Cl. No. 4.4, table no. 1(v)(Hardness, Tensile strength, Elongation at break percent)	-	-	-
Cl. No. 4.4, table no. 1(vi)(Change in volume)	-	-	-
Cl. No. 4.4, table no. 1(vii)(Compression set)	-	-	-
Cl. No. 4.4, table no. 1(viii)(Discolouration)	-	-	-
Cl. No. 4.4, table no. 1(ix)(Odour and taste)	-	-	-
Cl. No. 4.4, table no. 1(x)(Volatile matter)	-	-	-
Cl. No. 4.4, table no. 1(xi)(Total zinc oxide, percent by mass, )	-	-	-
Cl. No. 4.4, table no. 1(xii)(N-Nitrosamines,)	-	-	-
Cl. No. 4.4, table no. 1(xiii)(N-Nitrosatables)	-	-	-
Cl. No. 4.4, table no. 1(xiv)(Extractables)	-	-	-
Cl. No. 4.4, table no. 1(xv)(Polycyclic aromatic hydrocarbons (PAH) Benzo(a)pyrene (BaP))	-	-	-
Cl. No. 4.5, Table no. 2(i)(Antimony)	-	-	-
Cl. No. 4.5, Table no. 2(ii)(Arsenic)	-	-	-
Cl. No. 4.5, Table no. 2(iii)(Chromium)	-	-	-
Cl. No. 4.5, Table no. 2(iv)(Mercury)	-	-	-
Cl. No. 4.5, Table no. 2(v)(Cadmium)	-	-	-
Cl. No. 4.5, Table no. 2(vi)(Lead)	-	-	-
Cl. No. 4.5, Table no. 2(vii)(Barium)	-	-	-
Cl. No. 4.5, Table no. 2(viii)(Selenium)	-	-	-
Cl. No.4.6(performance test)	-	-	-
Cl. No. 4.7(Quality of Reagent)	-	-	-
Cl. No. 5(PACKING AND MARKING)	-	-	-
Cl. No. 3(TYPES)	-	-	-
Cl. No. 4.1(Material)	-	-	-
Cl. No. 4.2(Workmanship and Finish)	-	-	-
Cl. No. 4.3(Dimensions)	-	-	-
Cl. No. 4.4, table no. 1(i)(Hardness)	-	-	-
Cl. No. 4.4, table no. 1(ii)(Tensile strength)	-	-	-
Cl. No. 4.4, table no. 1(iii)(Elongation at break)	-	-	-
Cl. No. 4.4, table no. 1(iv)(Hardness, Tensile strength, Elongation at break percent)	-	-	-
Cl. No. 4.4, table no. 1(v)(Hardness, Tensile strength, Elongation at break percent)	-	-	-
Cl. No. 4.4, table no. 1(vi)(Change in volume)	-	-	-
Cl. No. 4.4, table no. 1(vii)(Compression set)	-	-	-
Cl. No. 4.4, table no. 1(viii)(Discolouration)	-	-	-
Cl. No. 4.4, table no. 1(ix)(Odour and taste)	-	-	-
Cl. No. 4.4, table no. 1(x)(Volatile matter)	-	-	-
Cl. No. 4.4, table no. 1(xi)(Total zinc oxide, percent by mass, )	-	-	-
Cl. No. 4.4, table no. 1(xii)(N-Nitrosamines,)	-	-	-
Cl. No. 4.4, table no. 1(xiii)(N-Nitrosatables)	-	-	-
Cl. No. 4.4, table no. 1(xiv)(Extractables)	-	-	-
Cl. No. 4.4, table no. 1(xv)(Polycyclic aromatic hydrocarbons (PAH) Benzo(a)pyrene (BaP))	-	-	-
Cl. No. 4.5, Table no. 2(i)(Antimony)	-	-	-
Cl. No. 4.5, Table no. 2(ii)(Arsenic)	-	-	-
Cl. No. 4.5, Table no. 2(iii)(Chromium)	-	-	-
Cl. No. 4.5, Table no. 2(iv)(Mercury)	-	-	-
Cl. No. 4.5, Table no. 2(v)(Cadmium)	-	-	-
Cl. No. 4.5, Table no. 2(vi)(Lead)	-	-	-
Cl. No. 4.5, Table no. 2(vii)(Barium)	-	-	-
Cl. No. 4.5, Table no. 2(viii)(Selenium)	-	-	-
Cl. No.4.6(performance test )	-	-	-
Cl. No. 4.7(Quality of Reagent)	-	-	-
Cl. No. 5(PACKING AND MARKING)	-	-	-

-
Included w.e.f. 23.06.2026

1597

ADS LABTECH, GHAZIABAD

8178326

IS 733 (2025)

Wrought Aluminium and Aluminium Alloy Bars, Rods, Sections, Extruded Tube, Hollow Sections and Profiles for General Engineering Purposes ? Specification (Fourth Revision)

WROUGHT ALUMINIUM AND ALUMINIUM ALLOY BARS, RODS, SECTIONS, EXTRUDED TUBES, HOLLOW SECTIONS AND PROFILES FOR GENERAL ENGINEERING PURPOSES

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6.1, Table-1 to 8(Fe)	-	500	-
Cl-6.1, Table-1 to 8(Cu)	-	500	-
Cl-6.1, Table-1 to 8(Mn)	-	500	-
Cl-6.1, Table-1 to 8(Mg)	-	500	-
Cl-6.1, Table-1 to 8(Cr)	-	500	-
Cl-6.1, Table-1 to 8(Zn)	-	500	-
Cl-6.1, Table-1 to 8(Ti)	-	500	-
Cl-6.1, Table-1 to 8(V)	-	500	-
Cl-6.1, Table-1 to 8(Aluminium)	-	500	-
Cl-6.2(chemical analysis)	-	2000	-
Cl-6.1, Table-1 to 8(Si)	-	500	-
Cl-7.1, 7.2 & 7.3, Table-9(Dimensions)	-	500	-
Cl-7.1, 7.2 & 7.3, Table-9(Rm MPa)	-	2000	-
Cl-7.1, 7.2 & 7.3, Table-9(Rp0.2 MPa)	-	2000	-
Cl-7.1, 7.2 & 7.3, Table-9(Elongation , Percent)	-	2000	-
Cl-9(Dimensions and Tolerances)	-	500	-
Cl-12(Packaging and Marking)	-	0	-
Cl-7.1(Tensile test)	-	2000	-
Cl-5(Freedom from Defects)	-	500	-
Cl. 6 Table 1 - Table 8(Sodium)	-	500	-
Cl. 6 Table 1 - Table 8(Strontium)	-	500	-
Cl. 6 Table 1 - Table 8(Antimony)	-	500	-
Cl. 6 Table 1 - Table 8(Zirconium +Titanium)	-	500	-
Cl. 6 Table 1 - Table 8(Phosphorus)	-	500	-
Cl-4(General requirements)	-	500	-

15 May, 2027

-
Included w.e.f 04.06.2026

1598

INDIAN TESTING LABORATORY PRIVATE LIMITED, GREATER NOIDA

8171306

IS 3087 (2025)

Medium Density Particle Boards of Wood and other Lignocellulosic Materials for General Purpose - Specification ( Third Revision )

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 7(Finish --IS 2380 (Part 2), IS 2380 (Part 3) & Visual)	-	500	-
As per Clause 8, Table 2(Length -IS 2380 (Part 2))	-	500	-
As per Clause 8, Table 2(Width - IS 2380 (Part 2))	-	500	-
As per Clause 8, Table 2(Thickness, Sanded/finished panel - IS 2380 (Part 2))	-	500	-
As per Clause 8, Table 2(Squareness, Max. - IS 2380 (Part 2))	-	500	-
As per Clause 8, Table 2(Edge straightness, Max. -IS 2380 (Part 2))	-	500	-
As per Clause 9.1 Table 3(Density -IS 2380 (Part 3))	-	500	-
As per Clause 9.1 Table 3(Moisture Content -IS 2380 (Part 3))	-	500	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Modulus of rupture (MoR), Min.-IS 2380 (Part 4))	-	500	-
As per Clause 9.1 Table 4, Table 6, Table 7(Modulus of elasticity (MoE), Min. -(IS 2380 (Part 4))	-	500	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table7(Internal bond strength, Min. - IS 2380 (Part 5))	-	1000	-
As per Clause 9.1 Table 6, Table 7(24 h thickness swelling (due to general absorption) Max. - IS 2380 (Part 17))	-	1000	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Screw withdrawal strength (face) , Min. -IS 2380 (Part 4))	-	1000	-
As per Clause 9.1 Table 4, Table 5, table 6, Table 7(Screw withdrawal strength (edge) , Min. -IS 2380 (Part 4))	-	500	-
As per Clause 9.1 , Table 6, Table 7(Moisture Resistance : Option 1 : Cyclic test (1. )Internal bond strength Min. -IS 2380 (Part 5) see note 1)	-	500	-
As per Clause 9.1 , Table 6, Table 7(Moisture Resistance : Option 2 : Boil test (1.) Internal bond strength , Min.- IS 2380 (Part 5) see note 2)	-	500	-
As per Clause 9.1 , Table 9(Formaldehyde content Fc, mg/100 g for oven dry board -IS 13745)	-	500	-
As per Clause 9.1 , Table 9(Steady-state formaldehyde emission, Fc, mg/m3 (optional test))	-	500	-
As per Clause 9.1 Table 3(Variation from mean density, --IS 2380 (Part 3))	-	500	-

15 Aug, 2028

-
Included w.e.f. 26.02.2026

1599

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 12406 (2025)

Medium Density Fibre Boards of Wood and Other Lignocellulosic Materials for General Purpose - Specification ( Third Revision )

All

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 7(Finish --IS 2380 (Part 2), IS 2380 (Part 3) & Visual)	-	6250	-
As per Clause 8, Table 2(Length -IS 2380 (Part 2))	-	6250	-
As per Clause 8, Table 2(Width - IS 2380 (Part 2))	-	6250	-
As per Clause 8, Table 2(Thickness - IS 2380 (Part 2))	-	6250	-
As per Clause 8, Table 2(Squareness, Max. - IS 2380 (Part 2))	-	6250	-
As per Clause 8, Table 2(Edge straightness, Max.)	-	6250	-
As per Clause 9.1 Table 3(Density -IS 2380 (Part 3))	-	6250	-
As per Clause 9.1 Table 3(Variation from mean density, --IS 2380 (Part 3))	-	6250	-
As per Clause 9.1 Table 3(Moisture Content -IS 2380 (Part 3))	-	6250	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Modulus of rupture (MoR), Min.-IS 2380 (Part 4))	-	6250	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Modulus of elasticity (MoE), Min. -(IS 2380 (Part 4))	-	6250	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table7(Internal bond strength, Min. - IS 2380 (Part 5))	-	6250	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(24 h thickness swelling (due to general absorption) Max. - IS 2380 (Part 17))	-	6250	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Screw withdrawal strength (face) , Min. -IS 2380 (Part 4))	-	6250	-
As per Clause 9.1 Table 4, Table 5, table 6, Table 7(Screw withdrawal strength (edge) , Min. -IS 2380 (Part 4))	-	6250	-
As per Clause 9.1 , Table 5, Table 6, Table 7(Moisture Resistance : Option 1 : Cyclic test (1. )Internal bond strength Min. -IS 2380 (Part 5) see note 1)	-	6250	-
As per Clause 9.1 , Table 5, Table 6, Table 7(Moisture Resistance : Option 2 : Boil test (1.) Internal bond strength , Min.- IS 2380 (Part 5) see note 2)	-	6250	-
As per Clause 9.1 , Table 9(Formaldehyde content Fc, mg/100 g for oven dry board -IS 13745)	-	6250	-
Cl-5.1(Wood and Any Other Lignocellulosic Material)	-	0	-
Cl-5.2(Adhesive)	-	6250	-
Cl-5.3(Sizing Material)	-	0	-
Cl-5.4(Preservative Treatment)	-	0	-
Cl-6(MANUFACTURE)	-	0	-

-
Included w.e.f. 26.02.2026 Exclusion: As per Clause 9.1 , Table 9 (Steady-state formaldehyde emission, Fc, mg/m3 (optional test))

1600

AANKAN CALIBRATION AND TESTING CENTRE LLP, DANTLI

7184406

IS 12786 (2024)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification (first revision)

ALL

16000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Material)	-	2000	EXTRA FOR RAW MATERIAL RS 2000
Cl-4.2(Carbon content of finished PE lateral pipe)	-	1000	-
Cl-5.1(Dimensions of pipes and wall thicknesses)	-	500	-
Cl-6.0(Visual Appearance)	-	500	-
Cl-7.1(Hydraulic Characteristics- Internal pressure creep rupture test)	-	1500	-
Cl-7.1(Hydraulic Characteristics- quality acceptance test)	-	4000	-
Cl-7.2(Reversion Test)	-	1500	-
Cl-7.3(Tensile Test)	-	0	-
Cl-7.3.1(Test Piece)	-	0	-
Cl-7.3.2(Procedure)	-	0	-
Cl-7.4(Susceptibility to Environmental Stress Cracking)	-	1500	-
Cl-8.0(Supply of pipes)	-	500	-
Cl-9.0(Coiling)	-	500	-
Cl-10.0(Sampling and criteria for conformity)	-	0	-
Cl-11(Marking)	-	500	-
3(Class of Pipe)	-	500	-
5.1 & Table 1(Dimensions of Pipes - Outside diameters)	-	500	-
5.1 & Table 1(Dimensions of Pipes - Wall thickness)	-	0	-
6(Visual Appearance)	-	0	-
7.1 & Table 2(Hydraulic Characteristics)	-	0	-
7.1 & Table 2(Hydraulic Characteristics)	-	0	-
7.2(Reversion Test)	-	0	-
7.3(Tensile Strength)	-	0	-
7.3(Elongation at Break)	-	0	-
7.4(SusceptibiIity to Environmental Stress Cracking)	-	0	-
4.2(a)(Carbon Black Content-IS 2530)	-	0	-
4.2(b)(Carbon Black Dispersion-IS 2530)	-	1000	-
Cl-4.1(Material)	-	0	-
Cl-4.2(Carbon content of finished PE lateral pipe)	-	0	-
Cl-5.1(Dimensions of pipes and wall thicknesses)	-	0	-
Cl-6.0(Visual Appearance)	-	0	-
Cl-7.1(Hydraulic Characteristics- Internal pressure creep rupture test)	-	0	-
Cl-7.1(Hydraulic Characteristics- quality acceptance test)	-	0	-
Cl-7.2(Reversion Test)	-	0	-
Cl-7.3(Tensile Test)	-	0	-
Cl-7.3.1(Test Piece)	-	0	-
Cl-7.3.2(Procedure)	-	0	-
Cl-7.4(Susceptibility to Environmental Stress Cracking)	-	0	-
Cl-8.0(Supply of pipes)	-	0	-
Cl-9.0(Coiling)	-	0	-
Cl-10.0(Sampling and criteria for conformity)	-	0	-
Cl-11(Marking)	-	0	-
3(Class of Pipe)	-	0	-
5.1 & Table 1(Dimensions of Pipes - Outside diameters)	-	0	-
5.1 & Table 1(Dimensions of Pipes - Wall thickness)	-	0	-
6(Visual Appearance)	-	0	-
7.1 & Table 2(Hydraulic Characteristics)	-	0	-
7.1 & Table 2(Hydraulic Characteristics)	-	0	-
7.2(Reversion Test)	-	0	-
7.3(Tensile Strength)	-	0	-
7.3(Elongation at Break)	-	0	-
7.4(SusceptibiIity to Environmental Stress Cracking)	-	0	-
4.2(a)(Carbon Black Content-IS 2530)	-	0	-
4.2(b)(Carbon Black Dispersion-IS 2530)	-	0	-
Cl-4.1(Material)	-	0	-
Cl-4.2(Carbon content of finished PE lateral pipe)	-	0	-
Cl-5.1(Dimensions of pipes and wall thicknesses)	-	0	-
Cl-6.0(Visual Appearance)	-	0	-
Cl-7.1(Hydraulic Characteristics- Internal pressure creep rupture test)	-	0	-
Cl-7.1(Hydraulic Characteristics- quality acceptance test)	-	0	-
Cl-7.2(Reversion Test)	-	0	-
Cl-7.3(Tensile Test)	-	0	-
Cl-7.3.1(Test Piece)	-	0	-
Cl-7.3.2(Procedure)	-	0	-
Cl-7.4(Susceptibility to Environmental Stress Cracking)	-	0	-
Cl-8.0(Supply of pipes)	-	0	-
Cl-9.0(Coiling)	-	0	-
Cl-10.0(Sampling and criteria for conformity)	-	0	-
Cl-11(Marking)	-	0	-
3(Class of Pipe)	-	0	-
5.1 & Table 1(Dimensions of Pipes - Outside diameters)	-	0	-
5.1 & Table 1(Dimensions of Pipes - Wall thickness)	-	0	-
6(Visual Appearance)	-	0	-
7.1 & Table 2(Hydraulic Characteristics)	-	0	-
7.1 & Table 2(Hydraulic Characteristics)	-	0	-
7.2(Reversion Test)	-	0	-
7.3(Tensile Strength)	-	0	-
7.3(Elongation at Break)	-	0	-
7.4(SusceptibiIity to Environmental Stress Cracking)	-	0	-
4.2(a)(Carbon Black Content-IS 2530)	-	0	-
4.2(b)(Carbon Black Dispersion-IS 2530)	-	0	-
Cl-4.1(Material)	-	0	-
Cl-4.2(Carbon content of finished PE lateral pipe)	-	0	-
Cl-5.1(Dimensions of pipes and wall thicknesses)	-	0	-
Cl-6.0(Visual Appearance)	-	0	-
Cl-7.1(Hydraulic Characteristics- Internal pressure creep rupture test)	-	0	-
Cl-7.1(Hydraulic Characteristics- quality acceptance test)	-	0	-
Cl-7.2(Reversion Test)	-	0	-
Cl-7.3(Tensile Test)	-	0	-
Cl-7.3.1(Test Piece)	-	0	-
Cl-7.3.2(Procedure)	-	0	-
Cl-7.4(Susceptibility to Environmental Stress Cracking)	-	0	-
Cl-8.0(Supply of pipes)	-	0	-
Cl-9.0(Coiling)	-	0	-
Cl-10.0(Sampling and criteria for conformity)	-	0	-
Cl-11(Marking)	-	0	-
3(Class of Pipe)	-	0	-
5.1 & Table 1(Dimensions of Pipes - Outside diameters)	-	0	-
5.1 & Table 1(Dimensions of Pipes - Wall thickness)	-	0	-
6(Visual Appearance)	-	0	-
7.1 & Table 2(Hydraulic Characteristics)	-	0	-
7.1 & Table 2(Hydraulic Characteristics)	-	0	-
7.2(Reversion Test)	-	0	-
7.3(Tensile Strength)	-	0	-
7.3(Elongation at Break)	-	0	-
7.4(SusceptibiIity to Environmental Stress Cracking)	-	0	-
4.2(a)(Carbon Black Content-IS 2530)	-	0	-
4.2(b)(Carbon Black Dispersion-IS 2530)	-	0	-

-
Included w.e.f 17.03.2026

1601

Bharti Automation Pvt. Ltd.(A Testing Division), Gurugram

8141726

IS 302 : Part 2 : Sec 3 (2024)

Household and Similar Electrical Appliances âSafety Part 2 Particular Requirements Section 3 Electric Irons (Second Revision)

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General requirement)	-	1000	-
Cl-7(Marking and instructions)	-	1000	-
Cl-8(Protection against access to live parts)	-	1000	-
Cl-10(Power input and current)	-	1000	-
Cl-11(Heating)	-	1000	-
Cl-13(Leakage current and electric strength at operating temperature)	-	1000	-
Cl-14(Transient overvoltages)	-	1000	-
Cl-15(Moisture resistance)	-	1000	-
Cl-16(Leakage current and electric strength)	-	1000	-
Cl-17(Overload protection of transformers and associated circuits)	-	1000	-
Cl-18(Endurance)	-	0	-
Cl-19(Abnormal operation)	-	1000	-
Cl-20(Stability and mechanical hazards)	-	1000	-
Cl-21(Mechanical strength)	-	1000	-
Cl-22(Construction)	-	1000	-
Cl-23(Internal wiring)	-	1000	-
Cl-24(Components)	-	1000	-
Cl-25(Supply connection and external flexible cords)	-	1000	-
Cl-26(Terminals for external conductors)	-	1000	-
Cl-27(Provision for earthing)	-	1000	-
Cl-28(Screws and connections)	-	1000	-
Cl-29(Clearances, creepage distances and solid insulation)	-	1000	-
Cl-30(Resistance to heat and fire)	-	1000	-
Cl-31(Resistance to rusting)	-	1000	-
Cl-12(Charging of metal-ion batteries)	-	1000	-

05 Aug, 2027

-
Included w.e.f 01.04.2026 "32.0 (Radiation, Toxicity and Similar hazards) 19.11.4.1 (Electrostatic discharges) 19.11.4.2 (Radiated fields) 19.11.4.3 (Fast transient bursts) 19.11.4.4 (Surge immunity test) 19.11.4.5 (Immunity to conducted discharges) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.7 (Harmonics) "

1602

Aaditech Test and Calibration Lab LLP

8179926

IS 2508 (2024)

Polyethylene Films and Sheets â Specification (Fourth Revision)

All Grade / Type / Size / Designation

9750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.4 Sl No. (i) of Table 1, Table 2, Table 3 & Table 4.(Density - IS 13360 : Part 3 : Sec 10 : 2021)	-	750	-
5.1.6(Black Film- Carbon black - IS 2508:2024)	-	750	-
5.1.6(Ash content - IS 2508: 2024)	-	750	-
5.1.6(carbon black dispersion - IS 2530: 1963)	-	750	-
5.1.1(Appearance)	-	500	-
5.1.2(Film Form)	-	0	-
5.1.3(Odour)	-	500	-
5.2.1.1/ Table-1,2,3 &4(Nominal Thickness, Annex C,)	-	250	-
5.2.1.2(Nominal Width)	-	250	-
6, Type 1 (LDPE/LLDPE) /Table-1("Tensile strength at break-Machine direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	1000	-
6/Table-1("Tensile strength at break-Transverse direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	1000	-
6/Table-1("Elongation % at break, -Machine direction,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	1000	-
6/Table-1("Elongation % at break, -Transverse direction,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	1000	-
6/Table-1("Ageing test at (70 ± 1) ºC for 7 days-Machine Direction, IS 7016 (Part 8) followed by IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	1000	-
6/Table-1("Ageing test at (70 ± 1) ºC for 7 days- Transverse Direction, IS 7016 (Part 8) followed by IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	1000	-
6/Table-1(Dart impact strength,Method B of IS 13360 (Part 5/Sec 6))	-	1500	-
6/Table-1(Tear resistance -Machine direction, IS 13360 (Part 5/Sec 23))	-	1000	-
" 7, Type 2 (HDPE/PE) /Table-2"("Tensile strength at break-Machine direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	1000	-
" 7/Table-2"("Tensile strength at break-Transverse direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	1000	-
" 7/Table-2"("Elongation % at break, -Machine direction,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	1000	-
" 7/Table-2"("Elongation % at break, -Transverse direction,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	1000	-
" 7/Table-2"("Ageing test at (70 ± 1) ºC for 7 days-Machine Direction, IS 7016 (Part 8) followed by IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	1000	-
" 7/Table-2"("Ageing test at (70 ± 1) ºC for 7 days- Transverse Direction, IS 7016 (Part 8) followed by IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	1000	-
6/Table-1(Tear resistance-Transverse direction, IS 13360 (Part 5/Sec 23))	-	1000	-
5.1.5(Melt Flow Index- IS 13360 : Part 4 : Sec 1 : subsec 1 or IS 13360 : Part 4 : Sec 1 : subsec 2)	-	750	-
" 7/Table-2"(Dart impact strength,Method B of IS 13360 (Part 5/Sec 6))	-	1500	-
8, Type 3 (LDPE/LLDPE, PE) /Table-3("Average Tensile Break strength- Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	1000	-
8/Table-3("Average Tensile Break strength- Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	1000	-
8/Table-3("Average Tensile Break Elongation %-Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	1000	-
8/Table-3("Average Tensile Break Elongation %-Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	1000	-
8/Table-3(Average Tear resistance, IS 2508: 2024 Annex-D)	-	1000	-
8/Table-3(Average Puncture resistance, IS 2508: 2024 Annex-E)	-	1000	-
9, Type 4 (HDPE/PE) /Table-4("Average Yield strength- Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	1000	-
9/Table-4("Average Yield strength- Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	1000	-
9/Table-4("Average Tensile Break strength- Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	1000	-
9/Table-4("Average Tensile Break strength- Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	1000	-
9/Table-4("Average Tensile yield Elongation %-Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	1000	-
9/Table-4("Average Tensile yield Elongation %-Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	1000	-
9/Table-4(Average Tensile Break Elongation %-Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3))	-	1000	-
9/Table-4(Average Tensile Break Elongation -Transverse Direction, IS 13360 (Part 5/Sec 1) and S 13360 (Part 5/Sec 3))	-	1000	-
9/Table-4(Average Tear resistance, IS 2508: 2024 Annex-D)	-	1000	-
Cl-4.2.3.1.4 (b)(Toluene Extract)	-	750	-
Cl-4.2.3.1.4 (c)(Volatile Matter, Max)	-	750	-
Cl-4.2.3.1.4 (d)(Carbon Black Particle Size)	-	750	-
Cl-4.2.3.1.4 (e)(Tint Strength)	-	1000	-
Cl-4.2.3.1.4 (a)(Density)	-	750	-
5.1.4 Sl No. (i) of Table 1, Table 2, Table 3 & Table 4.(Density - IS 13360 : Part 3 : Sec 10 : 2021)	-	-	-
5.1.6(Black Film- Carbon black - IS 2508:2024)	-	-	-
5.1.6(Ash content - IS 2508: 2024)	-	-	-
5.1.6(carbon black dispersion - IS 2530: 1963)	-	-	-
5.1.1(Appearance)	-	-	-
5.1.2(Film Form)	-	-	-
5.1.3(Odour)	-	-	-
5.2.1.1/ Table-1,2,3 &4(Nominal Thickness, Annex C,)	-	-	-
5.2.1.2(Nominal Width)	-	-	-
6, Type 1 (LDPE/LLDPE) /Table-1("Tensile strength at break-Machine direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	-	-
6/Table-1("Tensile strength at break-Transverse direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	-	-
6/Table-1("Elongation % at break, -Machine direction,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	-	-
6/Table-1("Elongation % at break, -Transverse direction,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	-	-
6/Table-1("Ageing test at (70 ± 1) ºC for 7 days-Machine Direction, IS 7016 (Part 8) followed by IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	-	-
6/Table-1("Ageing test at (70 ± 1) ºC for 7 days- Transverse Direction, IS 7016 (Part 8) followed by IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	-	-
6/Table-1(Dart impact strength,Method B of IS 13360 (Part 5/Sec 6))	-	-	-
6/Table-1(Tear resistance -Machine direction, IS 13360 (Part 5/Sec 23))	-	-	-
" 7, Type 2 (HDPE/PE) /Table-2"("Tensile strength at break-Machine direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	-	-
" 7/Table-2"("Tensile strength at break-Transverse direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	-	-
" 7/Table-2"("Elongation % at break, -Machine direction,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	-	-
" 7/Table-2"("Elongation % at break, -Transverse direction,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	-	-
" 7/Table-2"("Ageing test at (70 ± 1) ºC for 7 days-Machine Direction, IS 7016 (Part 8) followed by IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	-	-
" 7/Table-2"("Ageing test at (70 ± 1) ºC for 7 days- Transverse Direction, IS 7016 (Part 8) followed by IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	-	-
6/Table-1(Tear resistance-Transverse direction, IS 13360 (Part 5/Sec 23))	-	-	-
5.1.5(Melt Flow Index- IS 13360 : Part 4 : Sec 1 : subsec 1 or IS 13360 : Part 4 : Sec 1 : subsec 2)	-	-	-
" 7/Table-2"(Dart impact strength,Method B of IS 13360 (Part 5/Sec 6))	-	-	-
8, Type 3 (LDPE/LLDPE, PE) /Table-3("Average Tensile Break strength- Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	-	-
8/Table-3("Average Tensile Break strength- Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	-	-
8/Table-3("Average Tensile Break Elongation %-Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	-	-
8/Table-3("Average Tensile Break Elongation %-Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	-	-
8/Table-3(Average Tear resistance, IS 2508: 2024 Annex-D)	-	-	-
8/Table-3(Average Puncture resistance, IS 2508: 2024 Annex-E)	-	-	-
9, Type 4 (HDPE/PE) /Table-4("Average Yield strength- Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	-	-
9/Table-4("Average Yield strength- Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	-	-
9/Table-4("Average Tensile Break strength- Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	-	-
9/Table-4("Average Tensile Break strength- Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	-	-
9/Table-4("Average Tensile yield Elongation %-Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	-	-
9/Table-4("Average Tensile yield Elongation %-Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	-	-
9/Table-4(Average Tensile Break Elongation %-Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3))	-	-	-
9/Table-4(Average Tensile Break Elongation -Transverse Direction, IS 13360 (Part 5/Sec 1) and S 13360 (Part 5/Sec 3))	-	-	-
9/Table-4(Average Tear resistance, IS 2508: 2024 Annex-D)	-	-	-
Cl-4.2.3.1.4 (b)(Toluene Extract)	-	-	-
Cl-4.2.3.1.4 (c)(Volatile Matter, Max)	-	-	-
Cl-4.2.3.1.4 (d)(Carbon Black Particle Size)	-	-	-
Cl-4.2.3.1.4 (e)(Tint Strength)	-	-	-
Cl-4.2.3.1.4 (a)(Density)	-	-	-

-
Included w.e.f 01.04.2026

1603

BIS, Western Regional Laboratory (WRL)

None

IS 398 : Part 6 (2021)

Aluminium Conductors For Overhead Transmission Purposes Part 6: High conductivity aluminium alloy stranded conductors

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-7, Table-1 (Diameter of Wire (mm))	-
Cl-7, Table-1 (Minimum Tensile Strength of Wire)	-
Cl-7, Table-1 (Minimum Elongation on 250 mm (percent))	-
Cl-8 (Freedom from Defects)	-
Cl-9.1.1 (Wires-Nominal Sizes)	-
Cl-9.2.1 (Stranded Conductors- Size)	-
Cl-10 (Joints in Wires)	-
11 (Stranding)	-
16.2 (Visual Examination)	-
16.3, Table 4 (Measurement of Lay Ratio / Direction of Lay)	-
16.4, Table 2 (Measurement of Diameter of Individual Aluminium Alloy Wires)	-
16.5, Table 2 (Breaking Load Test - before stranding)	-
16.5, Table 2 (Breaking Load Test - after stranding)	-
16.6, Table 1 (Elongation Test - before stranding)	-
16.6, Table 1 (Elongation Test - after stranding)	-
16.7, Table 2 (Resistivity Test)	-
16.8 (Wrapping Test)	-
16.10, Table 3 (d.c. Resistance Test on Stranded Conductor)	-

-
Complete Test facility up to 80 square mm. For sizes above 80 square mm, Partial Test facility except Ultimate tensile Strength Test (Cl. 16.9) and Stress-Strain Test (Cl. 16.11)

1604

BIS, Western Regional Laboratory (WRL)

None

IS 302 : Part 1 (2008)

Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7 (Marking and instructions)	-
8.1.1 (Protection against live parts in all positions)	-
10.1 (Power input)	-
11.1 (General)	-
13.1 (General)	-
15.0 (General)	-
16.0 (General)	-
18 (Endurance Test requirements and tests)	-
19 (Abnormal Operation)	-
20 (Stability test)	-
21 (Mechanical Strength Test)	-
22 (Construction verification related test)	-
23 (General)	-
24 (Components)	-
25 (Supply connection and external flexible cords)	-
26 (Terminals for external conductors)	-
27 (Provision for earthing)	-
28 (Screw test and connections)	-
29 (clearance, creepage distances and solid insulation)	-
30.1 (Ball pressure test)	-
30.2 (Glow Wire Test)	-
31 (Resistance to Rusting)	-

-
For following appliances: 1) Wet Grinders 2) Egg Beater 3) Electric Shredder 4) Electric Water Boiler 5) Electric Kettle 6) Electric Centrifugal Juicer 7) Electric Slicing Machine 8) Electrical Grills & Toasters 9) Frying Pans 10) Warming Plates 11) Shavers ,Hair Clippers 12) Massage Appliances 13) Electric Food Processors 14) Electric Stove 15) Oral Hygiene Appliances

1605

CIMEC Infralabs Private Limited

8195606

IS 1161 (2014)

Steel tubes for structural purposes - Specification (Fifth Revision)

NB: 65 mm to 350 mm, Designation: YSt 210, YSt 240, YSt 310 and YSt 355

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6(Outer Diameter, Thickness & Mass)	-	500	-
Cl 7(Workmanship)	-	200	-
Cl 8(Workmanship)	-	200	-
Cl 9(Workmanship)	-	200	-
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	2000	-
Cl 13(Workmanship)	-	200	-
Cl 6(Outer Diameter, Thickness & Mass)	-	500	-
Cl 7(Workmanship)	-	0	Repeated
Cl 8(Workmanship)	-	0	Repeated
Cl 9(Workmanship)	-	0	Repeated
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	0	Repeated
Cl 13(Workmanship)	-	0	Repeated
Cl 6(Outer Diameter, Thickness & Mass)	-	0	Repeated
Cl 7(Workmanship)	-	0	Repeated
Cl 8(Workmanship)	-	0	Repeated
Cl 9(Workmanship)	-	0	Repeated
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	0	Repeated
Cl 13(Workmanship)	-	0	Repeated
8 AND AS PER IS 4736(UNIFORMITY OF ZINC COATING)	-	800	-
8 AND AS PER IS 4736(MASS OF ZINC COATING)	-	800	-
5 AND AS PER IS 10748(COPPER)	-	400	-
5 AND AS PER IS 10748(MICRO ALLOY)	-	1000	-
5 AND AS PER IS 10748(CARBON EQUIVALENT)	-	400	-
5 AND AS PER IS 10748(CARBON)	-	400	-
Clause - 5.1, Table-3( ALUMINIUM)	-	400	-
Clause - 5.1, Table-3(SILICON)	-	400	-
Clause - 5.1, Table-3(NITROGEN)	-	800	-
Clause - 5.1, Table-3(MANGANESE)	-	400	-
Clause - 5.1, Table-3(PHOSPHURS)	-	400	-
Clause - 5.1, Table-3(SULPHUR)	-	400	-
Clause - 5.1, Table-3( CARBON)	-	0	Repeated
9(Straightness)	-	500	-
10(Lengths)	-	200	-
Cl 11.3.1(Flattening test (over 50 mm NB))	-	500	-
Cl. 11.2 Table 2(Elongation)	-	1000	-
Cl. 11.2 Table 2(Yield strength)	-	1000	-
Cl. 6 , 6.2 Table 1(Weight)	-	500	-
Cl. 6 , 6.2 Table 1(Thickness)	-	500	-
Clause 11.2, Table -2(Elongation)	-	0	Repeated
Clause 11.2, Table -2(Yield Strength)	-	1000	-
Cl 13(Workmanship)	-	0	Repeated
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	0	Repeated
Cl 9(Workmanship)	-	0	Repeated
Cl 8(Workmanship)	-	0	Repeated
Cl 7(Workmanship)	-	0	Repeated
Cl 6(Outer Diameter, Thickness & Mass)	-	0	Repeated
Cl 6(Outer Diameter, Thickness & Mass)	-	0	Repeated
Cl 7(Workmanship)	-	0	Repeated
Cl 8(Workmanship)	-	0	Repeated
Cl 9(Workmanship)	-	0	Repeated
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	0	Repeated
Cl 13(Workmanship)	-	0	Repeated
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Outer Diameter - SOP MT-23)	-	0	Repeated
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Thickness - SOP MT-23)	-	0	Repeated
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Mass - SOP MT-23)	-	0	REPEATED
8.0(Mass of Zinc coating - IS:6745)	-	0	Repeated
8.0(Freedom from defects - IS 4736)	-	500	-
8.0(Uniformity of galvanized coating - IS 4736)	-	0	Repeated
8.0(Adhesion test-Pivoted Hammer Test - IS 4736)	-	0	Repeated
13.0(Oiling and Painting - Visual)	-	200	-
12(Marking)	-	200	-
CL 6("1.Outer dia (04) 2.Thickness (08)")	-	0	Repeated
CL 06(Minimum Outer dia (04))	-	0	Repeated
CL 06(Maximum Outer dia (04))	-	0	Repeated
CL 06(" Minimum Thickness (08)")	-	0	Repeated
CL 06(Maximum Thickness (08))	-	0	Repeated
Cl.5,8.1,8.2(Chromium)	-	400	-
Cl.5,8.1,8.2(Boron(B))	-	400	-
Cl.5,8.1,8.2(Titanium(Ti))	-	400	-
Cl.5,8.1,8.2(Niobium(Nb))	-	400	-
Cl.5,8.1,8.2(Vanadium(V))	-	400	-
Cl.5,8.1,8.2(Nb+Ti+V)	-	400	-
Cl.5,8.1,8.2(Nickel)	-	400	-
Cl.5,8.1,8.2(Molybdenum)	-	400	-
Cl.5,8.1,8.2(Cr+Ni)	-	400	-
Cl.5,8.1,8.2(CE Equivalent)	-	0	Repeated
Cl 6(Outer Diameter, Thickness & Mass)	-	0	Repeated
Cl 7(Workmanship)	-	0	Repeated
Cl 8(Workmanship)	-	0	Repeated
Cl 9(Workmanship)	-	0	Repeated
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	0	Repeated
Cl 13(Workmanship)	-	0	Repeated
Cl 6(Outer Diameter, Thickness & Mass)	-	0	Repeated
Cl 7(Workmanship)	-	0	Repeated
Cl 8(Workmanship)	-	0	Repeated
Cl 9(Workmanship)	-	0	Repeated
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	0	Repeated
Cl 13(Workmanship)	-	0	Repeated
Cl 6(Outer Diameter, Thickness & Mass)	-	0	Repeated
Cl 7(Workmanship)	-	0	Repeated
Cl 8(Workmanship)	-	0	Repeated
Cl 9(Workmanship)	-	0	Repeated
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	0	Repeated
Cl 13(Workmanship)	-	0	Repeated
9(Straightness)	-	0	Repeated
10(Lengths)	-	0	Repeated
Cl 11.3.1(Flattening test (over 50 mm NB))	-	0	Repeated
Cl. 11.2 Table 2(Elongation)	-	0	Repeated
Cl. 11.2 Table 2(Yield strength)	-	0	Repeated
Cl. 6 , 6.2 Table 1(Weight)	-	0	Repeated
Cl. 6 , 6.2 Table 1(Thickness)	-	0	Repeated
Clause 11.2, Table -2(Elongation)	-	0	Repeated
Clause 11.2, Table -2(Yield Strength)	-	0	Repeated
Cl 13(Workmanship)	-	0	Repeated
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	0	Repeated
Cl 9(Workmanship)	-	0	Repeated
Cl 8(Workmanship)	-	0	Repeated
Cl 7(Workmanship)	-	0	Repeated
Cl 6(Outer Diameter, Thickness & Mass)	-	0	Repeated
Cl 6(Outer Diameter, Thickness & Mass)	-	0	Repeated
Cl 7(Workmanship)	-	0	Repeated
Cl 8(Workmanship)	-	0	Repeated
Cl 9(Workmanship)	-	0	Repeated
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	0	Repeated
Cl 13(Workmanship)	-	0	Repeated
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Outer Diameter - SOP MT-23)	-	0	Repeated
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Thickness - SOP MT-23)	-	0	Repeated
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Mass - SOP MT-23)	-	0	Repeated
8.0(Mass of Zinc coating - IS:6745)	-	0	Repeated
8.0(Freedom from defects - IS 4736)	-	0	Repeated
8.0(Uniformity of galvanized coating - IS 4736)	-	0	Repeated
8.0(Adhesion test-Pivoted Hammer Test - IS 4736)	-	0	Repeated
13.0(Oiling and Painting - Visual)	-	0	Repeated
12(Marking)	-	0	Repeated
CL 6("1.Outer dia (04) 2.Thickness (08)")	-	0	Repeated
CL 06(Minimum Outer dia (04))	-	0	Repeated
CL 06(Maximum Outer dia (04))	-	0	Repeated
CL 06(" Minimum Thickness (08)")	-	0	Repeated
CL 06(Maximum Thickness (08))	-	0	Repeated
Cl.5,8.1,8.2(Chromium)	-	0	Repeated
Cl.5,8.1,8.2(Boron(B))	-	0	Repeated
Cl.5,8.1,8.2(Titanium(Ti))	-	0	Repeated
Cl.5,8.1,8.2(Niobium(Nb))	-	0	Repeated
Cl.5,8.1,8.2(Vanadium(V))	-	0	Repeated
Cl.5,8.1,8.2(Nb+Ti+V)	-	0	Repeated
Cl.5,8.1,8.2(Nickel)	-	0	Repeated
Cl.5,8.1,8.2(Molybdenum)	-	0	Repeated
Cl.5,8.1,8.2(Cr+Ni)	-	0	Repeated
Cl.5,8.1,8.2(CE Equivalent)	-	0	Repeated

14 Jan, 2029

-
-

1606

Stellar Test House, Noida

8171606

IS 302 : PART 1 (Insect Killers)

Insect Killers

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classifications)	-	500	-
5(General conditions for tests)	-	500	-
4(General Requirement)	-	500	-
11.8(Temperature rise)	-	500	-
11.7(Duration corresponding)	-	500	-
11.6(Combined appliances)	-	500	-
11.5(Motor-operated appliances)	-	500	-
11.4(Heating appliances)	-	500	-
8.1.5(Live parts of built-in appliances)	-	500	-
18(Endurance)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
16(Leakage current and electric strength)	-	1000	-
4(General requirement)	-	500	-
32(Radiation Toxicity and Similar Hazards)	-	500	-
31(Resistance to Rusting)	-	1000	-
30.2(Needle Flame Test)	-	1000	-
30.2(Glow Wire Test)	-	1000	-
30.1(Ball pressure test)	-	1000	-
29(clearance, creepage distances and solid insulation)	-	1000	-
28(Screw test and connections)	-	1000	-
27(Provision for earthing)	-	1000	-
26(Terminals for external conductors)	-	1000	-
25(Supply connection and external flexible cords)	-	1000	-
24(Components)	-	500	-
23(General)	-	500	-
22(Construction verification related test)	-	1000	-
21(Mechanical Strength Test)	-	1000	-
20(Stability test)	-	1000	-
19(Abnormal Operation)	-	1000	-
18(Endurance Test requirements and tests)	-	1000	-
17(Over Load Protection of Transformers and associated circuits)	-	1000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	1000	-
16.2(Leakage Current (after Clause 15))	-	1000	-
16.1(General)	-	1000	-
16.0(General)	-	1000	-
15.3(Humidity Test)	-	1000	-
15.2(Spillage Test)	-	1000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	1000	-
15.0(General)	-	1000	-
14(Transient Over Voltages)	-	1000	-
13.3(Electric Strength at operating temperature)	-	1000	-
13.2(Leakage current at operating temperature)	-	1000	-
13.1(General)	-	1000	-
11.3(Heating)	-	1000	-
11.2(General)	-	1000	-
11.1(General)	-	1000	-
10.2(Current input)	-	1000	-
10.1(Power input)	-	1000	-
9(Starting of motor operation test requirements and tests)	-	1000	-
8.1.4(Protection against live parts against protective impedance)	-	1000	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	1000	-
8.1.2(Protection against live parts in openings)	-	1000	-
8.1.1(Protection against live parts in all positions)	-	1000	-
7(Marking and instructions)	-	500	-

26 Sep, 2028

-
1. 19.11.4.7 (Harmonics) EMI/EMC Test Test facilities not available 2. 19.11.4.6 (Class 3 Voltage dips and interruptions) EMI/EMC Test Test facilities not available 3. 19.11.4.5 (Immunity to conducted discharges) EMI/EMC Test Test facilities not available 4. 19.11.4.4 (Surge immunity test) EMI/EMC Test Test facilities not available 5. 19.11.4.3 (Fast transient bursts) EMI/EMC Test Test facilities not available 6. 19.11.4.2 (Radiated fields) EMI/EMC Test Test facilities not available 7. 19.11.4.1 (Electrostatic discharges) EMI/EMC Test Test facilities not available"

1607

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 16172 (2023)

Reinforcement Couplers for Mechanical Splices of Steel Bars in Concrete ? Specification (first revision)

Class H & L

17500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Classification)	-	0	-
6(Manufacture)	-	0	-
7(Workmanship and Finish)	-	0	-
8(Nominal Sizes)	-	1000	-
9.2.1(Tensile Strength)	-	4000	-
9.2.1.1(Disengagement test for threaded couplers)	-	4000	-
9.2.2(Percentage Elongation)	-	4000	-
9.3(Slip Test)	-	4000	-

-
Included w.e.f. 26.02.2026 Exclusion: "9.4 (Cyclic Tensile Test) 9.5.1 (Low cycle Fatigue Test) 9.5.2 (High Cycle Fatigue test) "

1608

Yadav Measurements Pvt Ltd, Udaipur

8116426

IS 14439 : Part 4 (2025)

Legal metrology -- Gas volume meters: Part 4 Thermal mass flow based gas meters -- Specification

G1.6 to G25

3945500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(General specific requirements)	-	0	-
Cl-4.2(Base Conditions)	-	0	-
Cl-4.3(Flow Range)	-	0	-
Cl-4.4(Maximum Working Pressure)	-	0	-
Cl-4.5.2(Ambient Temperature Range)	-	0	-
Cl-4.5.3(Gas Temperature Range)	-	0	-
Cl-4.6(Range of Gases)	-	0	-
Cl-4.7(Installation Orientation)	-	0	-
Cl-5.1(General manufacturer metrological)	-	0	-
Cl-5.2(Test Mode Comparison)	-	35500	-
Cl-5.3.1(Permissible Errors)	-	120000	-
Cl-5.4(Gas-Air Relationship)	-	20500	-
Cl-5.5.1(Pressure Absorption Requirements)	-	8500	-
Cl-5.6(Metrological Stability)	-	8500	-
Cl-5.7.1(Flow Disturbance Requiremnets)	-	35500	-
Cl-5.8.1(Zero Flow Requirements)	-	20500	-
Cl-5.9.1(Reverse Flow Requirements)	-	8500	-
Cl-5.10.1(Low Flow Registration (Starting Flow Rate) Requirements)	-	10500	-
Cl-5.11.1(Overload Flow Rate Requirements)	-	10500	-
Cl-5.12(Pulsed (Unsteady) Flow)	-	55000	-
Cl-6.1(Mechanical Interference)	-	8500	-
Cl-6.2(Electronic Sealing)	-	8500	-
Cl-6.3.1(Robustness of Meter Case)	-	8500	-
Cl-6.3.2(Protection against Penetration of Dust and Water)	-	14500	-
Cl-6.3.3(External Leak Tightness Requirements)	-	8500	-
Cl-6.3.4(Resistance to Internal Pressure)	-	8500	-
Cl-6.3.5(Heat Resistance)	-	8500	-
Cl-6.3.6(Resistance to Impact Requirements)	-	8500	-
Cl-6.3.7(Resistance to Mishandling)	-	10500	-
Cl-6.4.1(Orientation Requirements)	-	8500	-
Cl-6.4.2(Threads and Flanges for Two Pipe Meters)	-	8500	-
Cl-6.4.3.1(Torque-Requirements:)	-	8500	-
Cl-6.4.3.2(Bending moment)	-	25000	-
Cl-6.5.1(Resistance to Vibration Requirements)	-	14500	-
Cl-6.6.2.1(Scratch resistance of the protective coating)	-	8500	-
Cl-6.6.2.2(Adhesion of the protective coating)	-	8500	-
Cl-6.6.2.3(Impact resistance of the protective coating Requirements)	-	8500	-
Cl-6.6.2.4(Chemical resistance of the protective coating Requirements:)	-	120000	-
Cl-6.6.2.5(Resistance to salt spray)	-	250000	-
Cl-6.6.2.6(Resistance to humidity)	-	320000	-
Cl-6.7.1(Flame Retardance of External Surfaces)	-	8500	-
Cl-6.8.1(Requirement for Rubber Components in the Gas Path)	-	8500	-
Cl-6.9.1(Resistance to Storage Temperature Range)	-	20500	-
Cl-6.10.1(Resistance to Toluene/ISO-Octane Vapour)	-	780000	-
Cl-6.11.1(Resistance to Water Vapour Requirements)	-	780000	-
Cl-6.12(Ageing Requirements)	-	780000	-
Cl-7.1(Pressure Measuring Point)	-	10500	-
Cl-7.2(Electrical Insulating Feet)	-	8500	-
Cl-7.3(Resistance to High Ambient Temperatures)	-	8500	-
Cl-7.4(Gas Valve and System)	-	8500	-
Cl-7.5(Additional Functionalities (if fitted))	-	14500	-
Cl-7.6(Use in Hazardous Zones)	-	0	-
Cl-7.7(Devices to Prevent Reverse Flow)	-	8500	-
Cl-8.1(Recording and Storage)	-	8500	-
Cl-8.2.1(Display Requirements)	-	8500	-
Cl-8.3.1(Display Functionality Requirements)	-	8500	-
Cl-8.4.1(Non-Volatile Memory)	-	25000	-
Cl-9(Marking)	-	8500	-
Cl-9(Marking- Two Pipe Meters)	-	8500	-
Cl-9("Marking Durability and Legibility of Marking and Labels")	-	243000	Price cover all mentioned clauses 9.4, 9.5, 10, 11.1, 11.2, 11.3, 11.4, 11.5, 11.6, 12.1, 12.2,12.3.1, 12.3.2, 12.3.3, 12.4, 12.5, 12.6, 13, 13.2,13.3, 13.4, 13.5, 13.6
Cl-5.2.4(Test Mode in Flow (Optional))	-	35500	-

-
Included w.e.f. 12.06.2026

1609

PIONEER TESTING LABORATORY PRIVATE LIMITED

8176806

IS 13395 (2021)

Performance of Handles and Handle Assemblies Attached to Cookware - Specification ( First Revision )

All Type

19500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Construction)	-	500	-
4.2(Materials)	-	500	-
4.3(Selection and Size)	-	500	-
4.4(Position of handle and knob with respect to cookware)	-	500	-
4.()	-	500	-
4.5(Attachment to cookware)	-	500	-
4.()	-	0	-
5.1(General)	-	500	-
5.2(Bending strength)	-	1000	-
5.3(Torque strength)	-	1000	-
5.4(Impact strength)	-	2000	-
5.5(Fatigue resistance)	-	2000	-
5.6(Leakage)	-	1500	-
5.7(Thermal insulation)	-	2000	-
5.8(Heat resistance)	-	2000	-
5.9(Washing resistance)	-	2000	-
5.10(Burning resistance)	-	2000	-
1()	-	500	-
4.1(Construction)	-	0	-
4.2(Materials)	-	0	-
4.3(Selection and Size)	-	0	-
4.4(Position of handle and knob with respect to cookware)	-	0	-
4.()	-	0	-
4.5(Attachment to cookware)	-	0	-
4.()	-	0	-
5.1(General)	-	0	-
5.2(Bending strength)	-	0	-
5.3(Torque strength)	-	0	-
5.4(Impact strength)	-	0	-
5.5(Fatigue resistance)	-	0	-
5.6(Leakage)	-	0	-
5.7(Thermal insulation)	-	0	-
5.8(Heat resistance)	-	0	-
5.9(Washing resistance)	-	0	-
5.10(Burning resistance)	-	0	-
1()	-	0	-

-
included w.e.f 17.03.2026

1610

AJEO TESTING LABS PVT LTD, GHAZIABAD

8178606

IS 1422 (1983)

Specification for cotton duck (third revision)

3200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4.2, Table 2, Sr. No. 1(Scouring loss, Scoured or Dyed)	-	500	10% DISCOUNT FOR BIS
Cl 4.2, Table 2, Sr. No. 1(Scouring loss, Grey)	-	400	10% DISCOUNT FOR BIS
Cl 4.2, Table 2, Sr. No. 2(pH value )	-	250	10% DISCOUNT FOR BIS
Cl 4.2, Table 2, Sr. No.4(Colour fastness ( for dyed duck ) to: Light)	-	500	10% DISCOUNT FOR BIS
Cl 4.2, Table 2, Sr. No.5(Washing - Test 3)	-	400	10% DISCOUNT FOR BIS
3.1(MANUFACTURE)	-	50	10% DISCOUNT FOR BIS
3.2(MANUFACTURE)	-	50	10% DISCOUNT FOR BIS
4.1,Table 1(Contsructional Particulars )	-	125	10% DISCOUNT FOR BIS
4.1,Table 1(Contsructional Particulars )	-	100	10% DISCOUNT FOR BIS
4.1,Table 1(Contsructional Particulars )	-	100	10% DISCOUNT FOR BIS
4.1,Table 1(Contsructional Particulars )	-	125	10% DISCOUNT FOR BIS
4.1,Table 1(Contsructional Particulars )	-	300	10% DISCOUNT FOR BIS
4.1,Table 1(Contsructional Particulars )	-	100	10% DISCOUNT FOR BIS
4.1,Table 1(Contsructional Particulars )	-	100	10% DISCOUNT FOR BIS
4.1,Table 1(Contsructional Particulars )	-	100	10% DISCOUNT FOR BIS
5.1 (a)(MARKING)	-	0	-
5.1 (b)(MARKING)	-	0	-
5.1 (c)(MARKING)	-	0	-
5.1 (d)(MARKING)	-	0	-
5.1 (e)(MARKING)	-	0	-
5.1 (f)(MARKING)	-	0	-
5.1 (g)(MARKING)	-	0	-
5.1.2(MARKING)	-	0	-
Cl 4.2, Table 2, Sr. No. 1(Scouring loss, Scoured or Dyed)	-	0	REPEAT
Cl 4.2, Table 2, Sr. No. 1(Scouring loss, Grey)	-	0	REPEAT
Cl 4.2, Table 2, Sr. No. 2(pH value )	-	0	REPEAT
Cl 4.2, Table 2, Sr. No.4(Colour fastness ( for dyed duck ) to: Light)	-	0	REPEAT
Cl 4.2, Table 2, Sr. No.5(Washing - Test 3)	-	0	REPEAT
3.1(MANUFACTURE)	-	0	REPEAT
3.2(MANUFACTURE)	-	0	REPEAT
4.1,Table 1(Contsructional Particulars )	-	0	REPEAT
4.1,Table 1(Contsructional Particulars )	-	0	REPEAT
4.1,Table 1(Contsructional Particulars )	-	0	REPEAT
4.1,Table 1(Contsructional Particulars )	-	0	REPEAT
4.1,Table 1(Contsructional Particulars )	-	0	REPEAT
4.1,Table 1(Contsructional Particulars )	-	0	REPEAT
4.1,Table 1(Contsructional Particulars )	-	0	REPEAT
4.1,Table 1(Contsructional Particulars )	-	0	REPEAT
5.1 (a)(MARKING)	-	0	REPEAT
5.1 (b)(MARKING)	-	0	REPEAT
5.1 (c)(MARKING)	-	0	REPEAT
5.1 (d)(MARKING)	-	0	REPEAT
5.1 (e)(MARKING)	-	0	REPEAT
5.1 (f)(MARKING)	-	0	REPEAT
5.1 (g)(MARKING)	-	0	REPEAT
5.1.2(MARKING)	-	0	REPEAT
Cl 4.2, Table 2, Sr. No. 1(Scouring loss, Scoured or Dyed)	-	0	REPEAT
Cl 4.2, Table 2, Sr. No. 1(Scouring loss, Grey)	-	0	REPEAT
Cl 4.2, Table 2, Sr. No. 2(pH value )	-	0	REPEAT
Cl 4.2, Table 2, Sr. No.4(Colour fastness ( for dyed duck ) to: Light)	-	0	REPEAT
Cl 4.2, Table 2, Sr. No.5(Washing - Test 3)	-	0	REPEAT
3.1(MANUFACTURE)	-	0	REPEAT
3.2(MANUFACTURE)	-	0	REPEAT
4.1,Table 1(Contsructional Particulars )	-	0	REPEAT
4.1,Table 1(Contsructional Particulars )	-	0	REPEAT
4.1,Table 1(Contsructional Particulars )	-	0	REPEAT
4.1,Table 1(Contsructional Particulars )	-	0	REPEAT
4.1,Table 1(Contsructional Particulars )	-	0	REPEAT
4.1,Table 1(Contsructional Particulars )	-	0	REPEAT
4.1,Table 1(Contsructional Particulars )	-	0	REPEAT
4.1,Table 1(Contsructional Particulars )	-	0	REPEAT
5.1 (a)(MARKING)	-	0	REPEAT
5.1 (b)(MARKING)	-	0	REPEAT
5.1 (c)(MARKING)	-	0	REPEAT
5.1 (d)(MARKING)	-	0	REPEAT
5.1 (e)(MARKING)	-	0	REPEAT
5.1 (f)(MARKING)	-	0	REPEAT
5.1 (g)(MARKING)	-	0	REPEAT
5.1.2(MARKING)	-	0	REPEAT

-
Included w.e.f 06.07.2026

1611

EMC Testing and Compliance LLP, Gurugram

8141526

IS 9873 (Part 2) (2025)

SAFETY OF TOYS PART 2 FLAMMABILITY (Fourth Revision)

2500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(General)	-	500	-
4.2,4.2.2(a) -5.2(Toys to be worn on the head (Beards,moustaches,wigs,etc.made from pile or flowing elements which protrude 50 mm or more from the surface of the toy))	-	2500	-
4.2,4.2.2(b) -5.2(Toys to be worn on the head (Beards,moustaches,wigs,etc.made from pile or flowing elements which protrude 50 mm or more from the surface of the toy))	-	2500	-
4.2,4.2.3 -5.3(Toys to be worn on the head (Beards,moustaches,wigs,etc.made from pile or flowing elements which protrude less than 50 mm from the surface of the toy))	-	2500	-
4.2,4.2.4 -5.3(Toys to be worn on the head (Full or partial moulded head masks))	-	2500	-
4.2,4.2.5 -5.4(Toys to be worn on the head (hood & headdresses,including upward -protruding items & mask not covered by 4.2.4 which partially or fully cover the head (e.g fabric & paperboard masks,eye masks,face masks), but excluding those items covered by 4.3))	-	2500	-
4.2,4.2.5 -5.4(Toys to be worn on the head (hood & headdresses,including upward -protruding items & mask not covered by 4.2.4 which partially or fully cover the head (e.g fabric & paperboard masks,eye masks,face masks), but excluding those items covered by 4.3))	-	2500	-
4.3 -5.5(Toy disguise costumes & toys intended to be worn by a child in play)	-	2500	-
4.3 -5.5(Toy disguise costumes & toys intended to be worn by a child in play)	-	2500	-
4.3 -5.4(Toy disguise costumes & toys intended to be worn by a child in play)	-	2500	-
4.3 -5.4(Toy disguise costumes & toys intended to be worn by a child in play)	-	2500	-
4.4 -5.4(Toys intended to be entered by a child)	-	2500	-
4.4 -5.4(Toys intended to be entered by a child)	-	2500	-
4.4 -5.4(Toys intended to be entered by a child Warning)	-	2500	-
4.5 -5.5(Soft-filled toys)	-	2500	-
4.5 -5.5(Soft-filled toys)	-	2500	-
4.1(General)	-	0	Repeated
4.2,4.2.2(a) -5.2(Toys to be worn on the head (Beards,moustaches,wigs,etc.made from pile or flowing elements which protrude 50 mm or more from the surface of the toy))	-	0	Repeated
4.2,4.2.2(b) -5.2(Toys to be worn on the head (Beards,moustaches,wigs,etc.made from pile or flowing elements which protrude 50 mm or more from the surface of the toy))	-	0	Repeated
4.2,4.2.3 -5.3(Toys to be worn on the head (Beards,moustaches,wigs,etc.made from pile or flowing elements which protrude less than 50 mm from the surface of the toy))	-	0	Repeated
4.2,4.2.4 -5.3(Toys to be worn on the head (Full or partial moulded head masks))	-	0	Repeated
4.2,4.2.5 -5.4(Toys to be worn on the head (hood & headdresses,including upward -protruding items & mask not covered by 4.2.4 which partially or fully cover the head (e.g fabric & paperboard masks,eye masks,face masks), but excluding those items covered by 4.3))	-	0	Repeated
4.2,4.2.5 -5.4(Toys to be worn on the head (hood & headdresses,including upward -protruding items & mask not covered by 4.2.4 which partially or fully cover the head (e.g fabric & paperboard masks,eye masks,face masks), but excluding those items covered by 4.3))	-	0	Repeated
4.3 -5.5(Toy disguise costumes & toys intended to be worn by a child in play)	-	0	Repeated
4.3 -5.5(Toy disguise costumes & toys intended to be worn by a child in play)	-	0	Repeated
4.3 -5.4(Toy disguise costumes & toys intended to be worn by a child in play)	-	0	Repeated
4.3 -5.4(Toy disguise costumes & toys intended to be worn by a child in play)	-	0	Repeated
4.4 -5.4(Toys intended to be entered by a child)	-	0	Repeated
4.4 -5.4(Toys intended to be entered by a child)	-	0	Repeated
4.4 -5.4(Toys intended to be entered by a child Warning)	-	0	Repeated
4.5 -5.5(Soft-filled toys)	-	0	Repeated
4.5 -5.5(Soft-filled toys)	-	0	Repeated

19 Jul, 2027

-
Included w.e.f.01.04.2026

1612

Bharti Automation Pvt. Ltd.(A Testing Division), Gurugram

8141726

IS 302 : Part 2 : Sec 26 (2014)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 26 clocks (First Revision)

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	2000	-
7(Marking and instructions)	-	2000	-
8(Protection against live parts)	-	2000	-
10(POWER INPUT AND CURRENT)	-	2000	-
11(HEATING)	-	2000	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	2000	-
14(TRANSIENT OVERVOLTAGES)	-	2000	-
15(MOISTURE RESISTANCE)	-	2000	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	2000	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	2000	-
19(ABNORMAL OPERATION)	-	2000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	2000	-
21(MECHANICAL STRENGTH)	-	2000	-
22(CONSTRUCTION)	-	2000	-
23(INTERNAL WIRING)	-	2000	-
24(COMPONENTS)	-	2000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	2000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	2000	-
27(PROVISION FOR EARTHING)	-	2000	-
28(SCREWS AND CONNECTIONS)	-	2000	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	2000	-
30(RESISTANCE TO HEAT AND FIRE)	-	2000	-
31(RESISTANCE TO RUSTING)	-	2000	-
22.16(Automatic cord reel)	-	1000	-
22.32(Oxygen bomb for rubber material)	-	1000	-
22.47(Water pressure inlet)	-	1000	-
22.3(Flexing test)	-	1000	-
24(Components)	-	2000	-
22.46(Software)	-	1000	-
4(General Requirements)	-	2000	-
5(General conditions for the tests)	-	2000	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	0	-
18(ENDURANCE)	-	0	-

05 Aug, 2027

-
"1 32 (RADIATION, TOXICITY AND SIMILAR HAZARDS) Radiation ,Toxicity and Similar Hazards Test Facility is not availabe with the laboratory 2 19.11.4.1 (Electrostatic discharges) Electrostatic discharges Test Facility is not availabe with the laboratory 3 19.11.4.2 (Radiated fields) Radiated fields Test Facility is not availabe with the laboratory 4 19.11.4.3 (Fast transient bursts) Fast transient bursts Test Facility is not availabe with the laboratory 5 19.11.4.4 (Surge immunity test) Surge immunity test Test Facility is not availabe with the laboratory 6 19.11.4.5 (Immunity to conducted discharges) Immunity to conducted discharges Test Facility is not availabe with the laboratory 7 19.11.4.6 (Voltage dips and interruptions) Voltage dips and interruptions Test Facility is not availabe with the laboratory 8 19.11.4.7 (Harmonics) Harmonics Test Facility is not availabe with the laboratory" 9 22.46 (Software) 10 24 (Components)

1613

Hindustaan Testing Solutions LLP, Ambala

9122136

IS 2619 (2018)

Glass beakers - Specification (Third Revision)

All

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5 Capacity (a)overflow of capacity of a beaker shall exceed the nominal capacity by at least 5 %;)	-	1000	Testing Charges-10000 20% discount to BIS GSTIN as per govt rule
Cl.5 Capacity (b) Distance between the levels corresponding to the nominal and overflow capacities shall be at least 10 mm.)	-	1000	-
Cl.7.1 Dimensions(Low-form and tall-form beakers shall observe the dimensions specified in Table 1 and thick-walled beakers the dimensions specifed in Table 2. The tolerances on the external diameter shall be ±5 % of the value given in the tables.)	-	3200	-
Cl.7.2 Radius at base(Beakers having a nominal capacity of 250 ml or greater shall have an external radius at the junction between the base and the side of 10 % to 20 % of the external diameter.)	-	800	-
Cl.7.2 Radius at base(Beakers having a nominal capacity less than 250 ml shall have a minimum radius at the junction between the base and the side of 5 % of the external diameter.)	-	800	-
Cl.7.3 Wall thickness(Substantial local irregularities from the minimum values for wall thickness given in the tables shall be avoided. That means, the minimum wall thickness shall fall at no place below the values given in Table 1 and Table 2 and the beakers shall comply with the requirement for thermal shock endurance specified in 8.5.)	-	800	-
Cl.8.1 Base(The design of the base shall enable the beaker to stand vertically on a plane horizontal surface without spinning or rocking)	-	200	-
8.2 Upper edge(The side of the beaker shall be slightly flared near the brim in a smooth and regular curve. The diameter of the brim shall be of the order of 5 % to 15 % greater than the diameter of the body. The edge of the brim shall be finished in a plane parallel with that of the horizontal base.)	-	800	-
Cl. 8.3 Spout(The spout shall be shaped so that, when the beaker is filled with water, the water may be poured in a regular stream clear of the side of the beaker. When the beaker is placed on a horizontal surface and filling is continued beyond its overflow capacity, the water shall first overflow from the spout and not from any other part of the brim.)	-	200	-
Cl.8.4 Scale(Beakers may be provided with a scale, which should approximately indicate the volume contained in the beaker.)	-	400	-
Cl.8.5 Thermal shock resistance(Beakers shall have a thermal shock resistance of 160 °C when tested in accordance with ISO 718.)	-	3200	-
Cl.5 Capacity (a)overflow of capacity of a beaker shall exceed the nominal capacity by at least 5 %;)	-	0	-
Cl.5 Capacity (b) Distance between the levels corresponding to the nominal and overflow capacities shall be at least 10 mm.)	-	0	-
Cl.7.1 Dimensions(Low-form and tall-form beakers shall observe the dimensions specified in Table 1 and thick-walled beakers the dimensions specifed in Table 2. The tolerances on the external diameter shall be ±5 % of the value given in the tables.)	-	0	-
Cl.7.2 Radius at base(Beakers having a nominal capacity of 250 ml or greater shall have an external radius at the junction between the base and the side of 10 % to 20 % of the external diameter.)	-	0	-
Cl.7.2 Radius at base(Beakers having a nominal capacity less than 250 ml shall have a minimum radius at the junction between the base and the side of 5 % of the external diameter.)	-	0	-
Cl.7.3 Wall thickness(Substantial local irregularities from the minimum values for wall thickness given in the tables shall be avoided. That means, the minimum wall thickness shall fall at no place below the values given in Table 1 and Table 2 and the beakers shall comply with the requirement for thermal shock endurance specified in 8.5.)	-	0	-
Cl.8.1 Base(The design of the base shall enable the beaker to stand vertically on a plane horizontal surface without spinning or rocking)	-	0	-
8.2 Upper edge(The side of the beaker shall be slightly flared near the brim in a smooth and regular curve. The diameter of the brim shall be of the order of 5 % to 15 % greater than the diameter of the body. The edge of the brim shall be finished in a plane parallel with that of the horizontal base.)	-	0	-
Cl. 8.3 Spout(The spout shall be shaped so that, when the beaker is filled with water, the water may be poured in a regular stream clear of the side of the beaker. When the beaker is placed on a horizontal surface and filling is continued beyond its overflow capacity, the water shall first overflow from the spout and not from any other part of the brim.)	-	0	-
Cl.8.4 Scale(Beakers may be provided with a scale, which should approximately indicate the volume contained in the beaker.)	-	0	-
Cl.8.5 Thermal shock resistance(Beakers shall have a thermal shock resistance of 160 °C when tested in accordance with ISO 718.)	-	0	-
Cl.5 Capacity (a)overflow of capacity of a beaker shall exceed the nominal capacity by at least 5 %;)	-	0	-
Cl.5 Capacity (b) Distance between the levels corresponding to the nominal and overflow capacities shall be at least 10 mm.)	-	0	-
Cl.7.1 Dimensions(Low-form and tall-form beakers shall observe the dimensions specified in Table 1 and thick-walled beakers the dimensions specifed in Table 2. The tolerances on the external diameter shall be ±5 % of the value given in the tables.)	-	0	-
Cl.7.2 Radius at base(Beakers having a nominal capacity of 250 ml or greater shall have an external radius at the junction between the base and the side of 10 % to 20 % of the external diameter.)	-	0	-
Cl.7.2 Radius at base(Beakers having a nominal capacity less than 250 ml shall have a minimum radius at the junction between the base and the side of 5 % of the external diameter.)	-	0	-
Cl.7.3 Wall thickness(Substantial local irregularities from the minimum values for wall thickness given in the tables shall be avoided. That means, the minimum wall thickness shall fall at no place below the values given in Table 1 and Table 2 and the beakers shall comply with the requirement for thermal shock endurance specified in 8.5.)	-	0	-
Cl.8.1 Base(The design of the base shall enable the beaker to stand vertically on a plane horizontal surface without spinning or rocking)	-	0	-
8.2 Upper edge(The side of the beaker shall be slightly flared near the brim in a smooth and regular curve. The diameter of the brim shall be of the order of 5 % to 15 % greater than the diameter of the body. The edge of the brim shall be finished in a plane parallel with that of the horizontal base.)	-	0	-
Cl. 8.3 Spout(The spout shall be shaped so that, when the beaker is filled with water, the water may be poured in a regular stream clear of the side of the beaker. When the beaker is placed on a horizontal surface and filling is continued beyond its overflow capacity, the water shall first overflow from the spout and not from any other part of the brim.)	-	0	-
Cl.8.4 Scale(Beakers may be provided with a scale, which should approximately indicate the volume contained in the beaker.)	-	0	-
Cl.8.5 Thermal shock resistance(Beakers shall have a thermal shock resistance of 160 °C when tested in accordance with ISO 718.)	-	0	-

12 Sep, 2028

-
Included w.e.f 03.06.2026

1614

Aaditech Test and Calibration Lab LLP

8179926

IS 13488 (2008)

Irrigation equipment - Emitting pipe systems - Specification (First Revision)

All

12700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Materials - shall be resistant to fertilizers and chemicals commonly employed in irrigation, and shall be suitable for use with water at temperatures up to 60°C and at pressures designed for the emitting pipe)	-	0	-
5.1.2 (Ref. Cl 4.1.a of IS 12786 : 1989)(Potyethylene - higher olefins constituent )	-	0	-
5.1.2 (Ref. Cl 4.1.b of IS 12786 : 1989)(Potyethylene - anti-oxidant)	-	0	-
5.1.2 (Ref. Cl 4.1.c.i of IS 12786 : 1989)(Density)	-	0	-
5.1.2 (Ref. Cl 4.1.c.ii of IS 12786 : 1989)(Toluene extract - Annex A of IS 12786:1989)	-	0	-
5.1.2 (Ref. Cl 4.1.c.iii of IS 12786 : 1989)(Volatile matter - Annex B of IS 12786:1989)	-	0	-
5.1.2 (Ref. Cl 4.1.c & 4.2.a of IS 12786 : 1989)(Carbon Black content - IS 2530 : 1963)	-	0	-
5.1.2 (Ref. Cl 4.2.b of IS 12786 : 1989)(The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	0	-
5.1.2 (Ref. Cl 4.3 of IS 12786 : 1989)(Addition of not more than 10 percent of the manufactures own rework material produced during the manufacture and works testing of pipe complying with this standard is permitted. No other rework material shall be used)	-	0	-
6.2.2(Fittings)	-	0	-
6.3(General)	-	200	-
6.3(General)	-	200	-
8.1.2(Uniformity of Emission Rate for Unregulated Emitting Pipes)	-	500	-
8.1.3(Uniformity of Emission Rate for Regulated Emitting Pipes)	-	500	-
8.2(Emission Rate of Emitting Unit as a Function of Inlet Pressure)	-	1000	-
8.2.1(Unregu/Qt~d Emining Pipe)	-	0	-
8.2.2(Regulated Emitting Pipes)	-	0	-
8.3.1(Wall Thickness ofEmitting Pipe)	-	200	-
8.3.2(Inside Diameter ofEmitting Pipe)	-	200	-
8.3.3(Flow Paths in Emitting Unit)	-	500	-
8.3.4(Spacing ofEmitter Units)	-	200	-
8.4.1(Resistance to Hydrostatic Pressure at Ambient Temperature)	-	750	-
8.4.2(Resistance to Hydrostatic Pressure at Elevated Temperature)	-	750	-
8.5(Resistance to Tension at Elevated Temperature)	-	1000	-
8.5(Resistance to Tension at Elevated Temperature)	-	1000	-
8.5(Resistance to Tension at Elevated Temperature)	-	1000	-
8.6(Resistance to Pull Out of Joints Between Fitting and Emitting IS 13479)	-	1500	-
8.7.1(Resistance of PE Emitting Pipe to Environmental Stress Cracking -Acceptance Test Annex D of IS 12786)	-	1500	-
8.7.2(Resistance of PE Emitting Pipe to Environmental Stress Cracking - Type Test Annex D of IS 12786)	-	1500	-
8.8(Determination of Emitting Unit Exponent)	-	500	-
9.1(DESIGNATION - Non regulated Emitting Pipe)	-	0	-
9.2(DESIGNATION - Regulated Emitting Pipe)	-	0	-
4.1 a(Identification)	-	500	-
4.1 a(Identification)	-	0	-
4.1 c(Volatile matter Extract)	-	0	-
4.1 d(Density)	-	500	-
4.1 d(MFI @ 1900C/2.16 Kg)	-	700	-
4.2(Carbon black content)	-	700	-
4.2(Carbon black dispersion)	-	700	-
5.1(Materials)	-	0	-
6.1.1, Table 1,(i)(Nominal Diameter)	-	0	-
6.1.1, Table 1,(ii)(Inside Diameter)	-	0	-
6.1.1, Table 1,(iii)(Tolerance on I.D)	-	0	-
6.1.1, Table 1,(iv)(Wall Thickness)	-	0	-
6.2(Fittings)	-	0	-
6.3(General)	-	0	-
7.1(Test Specimens)	-	0	-
7.2(Order of Tests)	-	0	-
7.3(Testing Conditions)	-	0	-
7.4(Accuracy of Measuring Devices)	-	0	-
8.1(Uniformity of Emission Rate)	-	0	-
8.1.2(Unregulated Emitting Pipes)	-	0	-
8.2(Emission Rate of Emitting Unit as a Function of Inlet Pressure)	-	0	-
8.2.1(Unregulated Emitting Pipes)	-	0	-
8.2.2(Regulated Emitting Pipes)	-	0	-
8.3.1(Wall Thickness ofEmitting Pipe)	-	0	-
8.3.2(Inside Diameter ofEmitting Pipe)	-	0	-
8.3.3(Flow Paths in Emitting Unit)	-	0	-
8.3.4(Spacing of Emitter Units)	-	0	-
8.4(Resistance of Emitting Pipes to Hydrostatic Pressure)	-	0	-
8.5(Resistance to Tension at Elevated Temperature)	-	0	-
8.6(Resistance to Pull Out ofJoints Between Fitting and Emitting)	-	0	-
8.7.1(Acceptance Test)	-	0	-
8.7.2(Type Test)	-	0	-
8.8(Determination of Emitting Unit Exponen)	-	0	-
9.1(Non-regulated Emitting Pipe)	-	0	-
9.2(Regulated Emitting Pipe)	-	0	-
10.1(Marking)	-	200	-
8.1.3(Regulated Emitting Pipes)	-	0	-
5.1(Materials - shall be resistant to fertilizers and chemicals commonly employed in irrigation, and shall be suitable for use with water at temperatures up to 60°C and at pressures designed for the emitting pipe)	-	0	-
5.1.2 (Ref. Cl 4.1.a of IS 12786 : 1989)(Potyethylene - higher olefins constituent )	-	0	-
5.1.2 (Ref. Cl 4.1.b of IS 12786 : 1989)(Potyethylene - anti-oxidant)	-	0	-
5.1.2 (Ref. Cl 4.1.c.i of IS 12786 : 1989)(Density)	-	0	-
5.1.2 (Ref. Cl 4.1.c.ii of IS 12786 : 1989)(Toluene extract - Annex A of IS 12786:1989)	-	0	-
5.1.2 (Ref. Cl 4.1.c.iii of IS 12786 : 1989)(Volatile matter - Annex B of IS 12786:1989)	-	0	-
5.1.2 (Ref. Cl 4.1.c & 4.2.a of IS 12786 : 1989)(Carbon Black content - IS 2530 : 1963)	-	0	-
5.1.2 (Ref. Cl 4.2.b of IS 12786 : 1989)(The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	0	-
5.1.2 (Ref. Cl 4.3 of IS 12786 : 1989)(Addition of not more than 10 percent of the manufactures own rework material produced during the manufacture and works testing of pipe complying with this standard is permitted. No other rework material shall be used)	-	0	-
6.2.2(Fittings)	-	0	-
6.3(General)	-	0	-
6.3(General)	-	0	-
8.1.2(Uniformity of Emission Rate for Unregulated Emitting Pipes)	-	0	-
8.1.3(Uniformity of Emission Rate for Regulated Emitting Pipes)	-	0	-
8.2(Emission Rate of Emitting Unit as a Function of Inlet Pressure)	-	0	-
8.2.1(Unregu/Qt~d Emining Pipe)	-	0	-
8.2.2(Regulated Emitting Pipes)	-	0	-
8.3.1(Wall Thickness ofEmitting Pipe)	-	0	-
8.3.2(Inside Diameter ofEmitting Pipe)	-	0	-
8.3.3(Flow Paths in Emitting Unit)	-	0	-
8.3.4(Spacing ofEmitter Units)	-	0	-
8.4.1(Resistance to Hydrostatic Pressure at Ambient Temperature)	-	0	-
8.4.2(Resistance to Hydrostatic Pressure at Elevated Temperature)	-	0	-
8.5(Resistance to Tension at Elevated Temperature)	-	0	-
8.5(Resistance to Tension at Elevated Temperature)	-	0	-
8.5(Resistance to Tension at Elevated Temperature)	-	0	-
8.6(Resistance to Pull Out of Joints Between Fitting and Emitting IS 13479)	-	0	-
8.7.1(Resistance of PE Emitting Pipe to Environmental Stress Cracking -Acceptance Test Annex D of IS 12786)	-	0	-
8.7.2(Resistance of PE Emitting Pipe to Environmental Stress Cracking - Type Test Annex D of IS 12786)	-	0	-
8.8(Determination of Emitting Unit Exponent)	-	0	-
9.1(DESIGNATION - Non regulated Emitting Pipe)	-	0	-
9.2(DESIGNATION - Regulated Emitting Pipe)	-	0	-
4.1 a(Identification)	-	0	-
4.1 a(Identification)	-	0	-
4.1 c(Volatile matter Extract)	-	0	-
4.1 d(Density)	-	0	-
4.1 d(MFI @ 1900C/2.16 Kg)	-	0	-
4.2(Carbon black content)	-	0	-
4.2(Carbon black dispersion)	-	0	-
5.1(Materials)	-	0	-
6.1.1, Table 1,(i)(Nominal Diameter)	-	0	-
6.1.1, Table 1,(ii)(Inside Diameter)	-	0	-
6.1.1, Table 1,(iii)(Tolerance on I.D)	-	0	-
6.1.1, Table 1,(iv)(Wall Thickness)	-	0	-
6.2(Fittings)	-	0	-
6.3(General)	-	0	-
7.1(Test Specimens)	-	0	-
7.2(Order of Tests)	-	0	-
7.3(Testing Conditions)	-	0	-
7.4(Accuracy of Measuring Devices)	-	0	-
8.1(Uniformity of Emission Rate)	-	0	-
8.1.2(Unregulated Emitting Pipes)	-	0	-
8.2(Emission Rate of Emitting Unit as a Function of Inlet Pressure)	-	0	-
8.2.1(Unregulated Emitting Pipes)	-	0	-
8.2.2(Regulated Emitting Pipes)	-	0	-
8.3.1(Wall Thickness ofEmitting Pipe)	-	0	-
8.3.2(Inside Diameter ofEmitting Pipe)	-	0	-
8.3.3(Flow Paths in Emitting Unit)	-	0	-
8.3.4(Spacing of Emitter Units)	-	0	-
8.4(Resistance of Emitting Pipes to Hydrostatic Pressure)	-	0	-
8.5(Resistance to Tension at Elevated Temperature)	-	0	-
8.6(Resistance to Pull Out ofJoints Between Fitting and Emitting)	-	0	-
8.7.1(Acceptance Test)	-	0	-
8.7.2(Type Test)	-	0	-
8.8(Determination of Emitting Unit Exponen)	-	0	-
9.1(Non-regulated Emitting Pipe)	-	0	-
9.2(Regulated Emitting Pipe)	-	0	-
10.1(Marking)	-	0	-
8.1.3(Regulated Emitting Pipes)	-	0	-

-
Included w.e.f 01.04.2026

1615

Hindustaan Testing Solutions LLP, Ambala

9122136

IS 1997 (2008)

Laboratory glassware - Burettes (Third Revision)

All

11250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11(Markings )	-	250	Testing Charges-11250 20% discount to BIS GSTIN as per govt rule
5.1(Class of Accuracy)	-	0	-
5.2(Types)	-	0	-
6.1(Maximum permissible errors)	-	1500	Including Nominal Capacity
8(Construction)	-	500	-
Table 2(i) Scale length )	-	500	-
Table 3( ii) Overall length )	-	500	-
Table 4(iii) Distance of Zero line from top of burette )	-	500	-
Table 5(iv) Distance of lowest graduation line from the top of stopcock )	-	500	-
Table 6(v) Length of tube of uniform bore below graduation line )	-	500	-
Table 7(vi) Distance of end of jet from underside of stopcock )	-	500	-
8.2( c) Top of burette )	-	500	-
8.3(d) Stopcock and similar devices)	-	500	-
8.4(e) Stop Cock Leakage)	-	1000	-
8.5( f) Delivery jet)	-	500	-
8.6(g) Delivery time )	-	500	-
8.6(g) Delivery time )	-	500	-
9(Graduations, figuring and patterns )	-	500	-
9.1(a) Graduations patterns )	-	0	-
9.2(Position of graduation line)	-	0	-
9.3(c) Marking of graduation lines )	-	0	-
12(. Visibility of graduation line)	-	500	-
11(Markings )	-	0	-
5.1(Class of Accuracy)	-	0	-
5.2(Types)	-	0	-
6.1(Maximum permissible errors)	-	0	-
8(Construction)	-	0	-
Table 2(i) Scale length )	-	0	-
Table 3( ii) Overall length )	-	0	-
Table 4(iii) Distance of Zero line from top of burette )	-	0	-
Table 5(iv) Distance of lowest graduation line from the top of stopcock )	-	0	-
Table 6(v) Length of tube of uniform bore below graduation line )	-	0	-
Table 7(vi) Distance of end of jet from underside of stopcock )	-	0	-
8.2( c) Top of burette )	-	0	-
8.3(d) Stopcock and similar devices)	-	0	-
8.4(e) Stop Cock Leakage)	-	0	-
8.5( f) Delivery jet)	-	0	-
8.6(g) Delivery time )	-	0	-
8.6(g) Delivery time )	-	0	-
9(Graduations, figuring and patterns )	-	0	-
9.1(a) Graduations patterns )	-	0	-
9.2(Position of graduation line)	-	0	-
9.3(c) Marking of graduation lines )	-	0	-
12(. Visibility of graduation line)	-	0	-
11(Markings )	-	0	-
5.1(Class of Accuracy)	-	0	-
5.2(Types)	-	0	-
6.1(Maximum permissible errors)	-	0	-
8(Construction)	-	0	-
Table 2(i) Scale length )	-	0	-
Table 3( ii) Overall length )	-	0	-
Table 4(iii) Distance of Zero line from top of burette )	-	0	-
Table 5(iv) Distance of lowest graduation line from the top of stopcock )	-	0	-
Table 6(v) Length of tube of uniform bore below graduation line )	-	0	-
Table 7(vi) Distance of end of jet from underside of stopcock )	-	0	-
8.2( c) Top of burette )	-	0	-
8.3(d) Stopcock and similar devices)	-	0	-
8.4(e) Stop Cock Leakage)	-	0	-
8.5( f) Delivery jet)	-	0	-
8.6(g) Delivery time )	-	0	-
8.6(g) Delivery time )	-	0	-
9(Graduations, figuring and patterns )	-	0	-
9.1(a) Graduations patterns )	-	0	-
9.2(Position of graduation line)	-	0	-
9.3(c) Marking of graduation lines )	-	0	-
12(. Visibility of graduation line)	-	0	-
7(Material)	-	1500	-

12 Sep, 2028

-
-

1616

Stellar Test House, Noida

8171606

IS 302 : PART 1 (Electric Centrifugal Juicers)

Electric Centrifugal Juicers

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
29(Clearances, Creepage distances and Solid Insulation)	-	1000	-
27(Provision for Earthing)	-	1000	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	500	-
4(GENERAL REQUIREMENTS)	-	500	-
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	1000	-
31(Resistance of Rusting, IS 302-1)	-	1000	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	1000	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	1000	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
28(Screws & Connections, IS 302-1)	-	1000	-
27.5(Provision for Earthing, IS 302-1)	-	1000	-
27.4(Provision for Earthing, IS 302-1)	-	1000	-
27.3(Provision for Earthing, IS 302-1)	-	1000	-
27.2(Provision for Earthing, IS 302-1)	-	1000	-
27(Provision for Earthing, IS 302-1)	-	1000	-
26(Terminals for External Conductors, IS 302-1)	-	1000	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
24.6(Components, IS 302-1)	-	1000	-
24.5(Components, IS 302-1)	-	1000	-
24.2(Components, IS 302-1)	-	1000	-
24.1(Components, IS 302-1)	-	1000	-
23.10(Internal Wiring, IS 302-1)	-	1000	-
23.9(Internal Wiring, IS 302-1)	-	1000	-
23.8(Internal Wiring, IS 302-1)	-	1000	-
23.7(Internal Wiring, IS 302-1)	-	1000	-
23.6(Internal Wiring, IS 302-1)	-	1000	-
23.5(Internal Wiring, IS 302-1)	-	1000	-
23.4(Internal Wiring, IS 302-1)	-	1000	-
23.3(Internal Wiring, IS 302-1)	-	1000	-
23.2(Internal Wiring, IS 302-1)	-	1000	-
23.1(Internal Wiring, IS 302-1)	-	1000	-
22.101(Construction)	-	1000	-
22(Construction, IS 302-1)	-	1000	-
21.2(Mechanical Strength, IS 302-1)	-	1000	-
21.1(Mechanical Strength, IS 302-1)	-	1000	-
20.116(Stability & Mechanical Hazards)	-	1000	-
20.115(Stability & Mechanical Hazards)	-	1000	-
20.114(Stability & Mechanical Hazards)	-	1000	-
20.113(Stability & Mechanical Hazards)	-	1000	-
20.112(Stability & Mechanical Hazards)	-	1000	-
20.111(Stability & Mechanical Hazards)	-	1000	-
20.110(Stability & Mechanical Hazards)	-	1000	-
20.109(Stability & Mechanical Hazards)	-	1000	-
20.108(Slicing machines shall incorporate a guard surrounding the circular knife, its open sector being no larger than required for using the appliance Knife guards shall be non-detachable unless the motor cannot be switched on after their removal. It shall not be possible to operate interlocks by means of test probe B of IS 1401. Appliance shall satisfy requirements as per Cl. 20.108 of IS 302-2-14-2009)	-	1000	-
20.107(Stability & Mechanical Hazards)	-	1000	-
20.106(Stability & Mechanical Hazards)	-	1000	-
20.105(Stability & Mechanical Hazards)	-	1000	-
20.104(Stability & Mechanical Hazards)	-	1000	-
20.103(Stability & Mechanical Hazards)	-	1000	-
20.102(Stability & Mechanical Hazards)	-	1000	-
20.101(Stability & Mechanical Hazards)	-	1000	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
19.1(Abnormal Operation, IS 302-1)	-	1000	-
19.9(Abnormal Operation, IS 302-1)	-	1000	-
19.8(Abnormal Operation, IS 302-1)	-	1000	-
19.7(Abnormal Operation, IS 302-1)	-	1000	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	1000	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
15(Moisture Resistance, IS 302-1)	-	1000	-
15.2(Moisture Resistance, IS 302-1)	-	1000	-
15.1(Moisture Resistance, IS 302-1)	-	1000	-
14(Transient Over Voltages, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
10(Power Input and Current, IS 302-1)	-	1000	-
8(Protection Against Electric Shock, IS 302-1)	-	1000	-
7.15(Marking- IS 302-1)	-	1000	-
7.14(Marking- IS 302-1)	-	1000	-
7.13(Marking- IS 302-1)	-	1000	-
7.12(Marking- IS 302-1)	-	1000	-
7.11(Marking- IS 302-1)	-	1000	-
7.8(Marking- IS 302-1)	-	1000	-
7.7(Marking- IS 302-1)	-	1000	-
7.6(Marking- IS 302-1)	-	1000	-
7.4(Marking- IS 302-1)	-	1000	-
7.3(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
6(Classification- IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
6(Classification- IS 302-1)	-	500	-
29(Clearances, Creepage distances and Solid Insulation)	-	1000	-
27(Provision for Earthing)	-	1000	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	500	-
4(GENERAL REQUIREMENTS)	-	500	-
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	1000	-
31(Resistance of Rusting, IS 302-1)	-	1000	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	1000	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	1000	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
28(Screws & Connections, IS 302-1)	-	1000	-
27.5(Provision for Earthing, IS 302-1)	-	1000	-
27.4(Provision for Earthing, IS 302-1)	-	1000	-
27.3(Provision for Earthing, IS 302-1)	-	1000	-
27.2(Provision for Earthing, IS 302-1)	-	1000	-
27(Provision for Earthing, IS 302-1)	-	1000	-
26(Terminals for External Conductors, IS 302-1)	-	1000	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
24.6(Components, IS 302-1)	-	1000	-
24.5(Components, IS 302-1)	-	1000	-
24.2(Components, IS 302-1)	-	1000	-
24.1(Components, IS 302-1)	-	1000	-
23.10(Internal Wiring, IS 302-1)	-	1000	-
23.9(Internal Wiring, IS 302-1)	-	1000	-
23.8(Internal Wiring, IS 302-1)	-	1000	-
23.7(Internal Wiring, IS 302-1)	-	1000	-
23.6(Internal Wiring, IS 302-1)	-	1000	-
23.5(Internal Wiring, IS 302-1)	-	1000	-
23.4(Internal Wiring, IS 302-1)	-	1000	-
23.3(Internal Wiring, IS 302-1)	-	1000	-
23.2(Internal Wiring, IS 302-1)	-	1000	-
23.1(Internal Wiring, IS 302-1)	-	1000	-
22.101(Construction)	-	1000	-
22(Construction, IS 302-1)	-	1000	-
21.2(Mechanical Strength, IS 302-1)	-	1000	-
21.1(Mechanical Strength, IS 302-1)	-	1000	-
20.116(Stability & Mechanical Hazards)	-	1000	-
20.115(Stability & Mechanical Hazards)	-	1000	-
20.114(Stability & Mechanical Hazards)	-	1000	-
20.113(Stability & Mechanical Hazards)	-	1000	-
20.112(Stability & Mechanical Hazards)	-	1000	-
20.111(Stability & Mechanical Hazards)	-	1000	-
20.110(Stability & Mechanical Hazards)	-	1000	-
20.109(Stability & Mechanical Hazards)	-	1000	-
20.108(Slicing machines shall incorporate a guard surrounding the circular knife, its open sector being no larger than required for using the appliance Knife guards shall be non-detachable unless the motor cannot be switched on after their removal. It shall not be possible to operate interlocks by means of test probe B of IS 1401. Appliance shall satisfy requirements as per Cl. 20.108 of IS 302-2-14-2009)	-	1000	-
20.107(Stability & Mechanical Hazards)	-	1000	-
20.106(Stability & Mechanical Hazards)	-	1000	-
20.105(Stability & Mechanical Hazards)	-	1000	-
20.104(Stability & Mechanical Hazards)	-	1000	-
20.103(Stability & Mechanical Hazards)	-	1000	-
20.102(Stability & Mechanical Hazards)	-	1000	-
20.101(Stability & Mechanical Hazards)	-	1000	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
19.1(Abnormal Operation, IS 302-1)	-	1000	-
19.9(Abnormal Operation, IS 302-1)	-	1000	-
19.8(Abnormal Operation, IS 302-1)	-	1000	-
19.7(Abnormal Operation, IS 302-1)	-	1000	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	1000	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
15(Moisture Resistance, IS 302-1)	-	1000	-
15.2(Moisture Resistance, IS 302-1)	-	1000	-
15.1(Moisture Resistance, IS 302-1)	-	1000	-
14(Transient Over Voltages, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
10(Power Input and Current, IS 302-1)	-	1000	-
8(Protection Against Electric Shock, IS 302-1)	-	1000	-
7.15(Marking- IS 302-1)	-	500	-
7.14(Marking- IS 302-1)	-	500	-
7.13(Marking- IS 302-1)	-	500	-
7.12(Marking- IS 302-1)	-	500	-
7.11(Marking- IS 302-1)	-	500	-
7.8(Marking- IS 302-1)	-	500	-
7.7(Marking- IS 302-1)	-	500	-
7.6(Marking- IS 302-1)	-	500	-
7.4(Marking- IS 302-1)	-	500	-
7.3(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
6(Classification- IS 302-1)	-	500	-
11(Heating, IS 302-1)	-	500	-
11(Heating, IS 302-1)	-	500	-
11(Heating, IS 302-1)	-	500	-
11(Heating, IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
6(Classification- IS 302-1)	-	500	-
22.102(Construction)	-	500	-
19.102(Abnormal Operation)	-	500	-
19.101(Abnormal Operation)	-	500	-
7.101(Marking)	-	500	-
29(Clearances, Creepage distances and Solid Insulation)	-	-	-
27(Provision for Earthing)	-	-	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	-	-
4(GENERAL REQUIREMENTS)	-	-	-
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	-	-
31(Resistance of Rusting, IS 302-1)	-	-	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	-	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	-	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	-	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	-	-
28(Screws & Connections, IS 302-1)	-	-	-
27.5(Provision for Earthing, IS 302-1)	-	-	-
27.4(Provision for Earthing, IS 302-1)	-	-	-
27.3(Provision for Earthing, IS 302-1)	-	-	-
27.2(Provision for Earthing, IS 302-1)	-	-	-
27(Provision for Earthing, IS 302-1)	-	-	-
26(Terminals for External Conductors, IS 302-1)	-	-	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
24.6(Components, IS 302-1)	-	-	-
24.5(Components, IS 302-1)	-	-	-
24.2(Components, IS 302-1)	-	-	-
24.1(Components, IS 302-1)	-	-	-
23.10(Internal Wiring, IS 302-1)	-	-	-
23.9(Internal Wiring, IS 302-1)	-	-	-
23.8(Internal Wiring, IS 302-1)	-	-	-
23.7(Internal Wiring, IS 302-1)	-	-	-
23.6(Internal Wiring, IS 302-1)	-	-	-
23.5(Internal Wiring, IS 302-1)	-	-	-
23.4(Internal Wiring, IS 302-1)	-	-	-
23.3(Internal Wiring, IS 302-1)	-	-	-
23.2(Internal Wiring, IS 302-1)	-	-	-
23.1(Internal Wiring, IS 302-1)	-	-	-
22.101(Construction)	-	-	-
22(Construction, IS 302-1)	-	-	-
21.2(Mechanical Strength, IS 302-1)	-	-	-
21.1(Mechanical Strength, IS 302-1)	-	-	-
20.116(Stability & Mechanical Hazards)	-	-	-
20.115(Stability & Mechanical Hazards)	-	-	-
20.114(Stability & Mechanical Hazards)	-	-	-
20.113(Stability & Mechanical Hazards)	-	-	-
20.112(Stability & Mechanical Hazards)	-	-	-
20.111(Stability & Mechanical Hazards)	-	-	-
20.110(Stability & Mechanical Hazards)	-	-	-
20.109(Stability & Mechanical Hazards)	-	-	-
20.108(Slicing machines shall incorporate a guard surrounding the circular knife, its open sector being no larger than required for using the appliance Knife guards shall be non-detachable unless the motor cannot be switched on after their removal. It shall not be possible to operate interlocks by means of test probe B of IS 1401. Appliance shall satisfy requirements as per Cl. 20.108 of IS 302-2-14-2009)	-	-	-
20.107(Stability & Mechanical Hazards)	-	-	-
20.106(Stability & Mechanical Hazards)	-	-	-
20.105(Stability & Mechanical Hazards)	-	-	-
20.104(Stability & Mechanical Hazards)	-	-	-
20.103(Stability & Mechanical Hazards)	-	-	-
20.102(Stability & Mechanical Hazards)	-	-	-
20.101(Stability & Mechanical Hazards)	-	-	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	-	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	-	-
19.1(Abnormal Operation, IS 302-1)	-	-	-
19.9(Abnormal Operation, IS 302-1)	-	-	-
19.8(Abnormal Operation, IS 302-1)	-	-	-
19.7(Abnormal Operation, IS 302-1)	-	-	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	-	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	-	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	-	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	-	-
15(Moisture Resistance, IS 302-1)	-	-	-
15.2(Moisture Resistance, IS 302-1)	-	-	-
15.1(Moisture Resistance, IS 302-1)	-	-	-
14(Transient Over Voltages, IS 302-1)	-	-	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	-	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	-	-
11(Heating, IS 302-1)	-	-	-
10(Power Input and Current, IS 302-1)	-	-	-
8(Protection Against Electric Shock, IS 302-1)	-	-	-
7.15(Marking- IS 302-1)	-	-	-
7.14(Marking- IS 302-1)	-	-	-
7.13(Marking- IS 302-1)	-	-	-
7.12(Marking- IS 302-1)	-	-	-
7.11(Marking- IS 302-1)	-	-	-
7.8(Marking- IS 302-1)	-	-	-
7.7(Marking- IS 302-1)	-	-	-
7.6(Marking- IS 302-1)	-	-	-
7.4(Marking- IS 302-1)	-	-	-
7.3(Marking- IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
6(Classification- IS 302-1)	-	-	-
11(Heating, IS 302-1)	-	-	-
11(Heating, IS 302-1)	-	-	-
11(Heating, IS 302-1)	-	-	-
11(Heating, IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
6(Classification- IS 302-1)	-	-	-
22.102(Construction)	-	-	-
19.102(Abnormal Operation)	-	-	-
19.101(Abnormal Operation)	-	-	-
7.101(Marking)	-	-	-

26 Sep, 2028

-
Included w.e.f. 08.04.2026 Exclusion 32 (Radiation, Toxicity and similar Hazard IS 302-1) "19.11.4.1 (Electrostatic discharges) 19.11.4.2 (Radiated fields) 19.11.4.3 (Fast transient bursts) 19.11.4.4 (Surge immunity test) 19.11.4.5 (Immunity to conducted discharges) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.7 (Harmonics) "

1617

Electrical Research and Development Association

7132925

IS 1180 : Part 1 (2014)

Outdoor Type Oil Immersed Distribution Transformers Upto and Including 2 500 kVA, 33kV - Specification Part 1 Mineral Oil Immersed (Fourth Revision)

Distribution Transformer

115725 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
21.2 a)(Measurement of winding resistance )	-	690	Testing charges Measurement of winding resistance is Rs.690, Subsequent measurement at different taps is Rs.345
21.2 b)( Measurement of voltage ratio and check of phase displacemen)	-	920	Testing charges for Measurement of winding resistance is Rs.920, Subsequent measurement at different taps is Rs.460
21.2 c)( Measurement of short-circuit impedance (principal tapping, when applicable) and load loss at 50 percent and 100 percent load)	-	4313	Testing charges for short circuit impedance
21.2 d)(Measurement of no-load loss and current)	-	2875	Testing charges for no load loss and current
21.2 e)(Measurement of insulation resistance)	-	575	Testing charges for measurement of insulation resistance
21.2 f)(Induced over-voltage withstand test)	-	1150	Testing charges for induced over voltage withstand test
21.2 g)( Separate-source voltage withstand test)	-	1150	Testing charges for separate source voltage withstand test
21.3(a )(Lightning impulse test)	-	31762	Testing charges for lightening impulse test up to 100kVA is Rs.28875, from 100kVA up to 200kVA is Rs.31762
21.3(b)(Temperature-rise test)	-	17250	Testing charges for temperature rise test
21.4 a)( Determination of sound levels)	-	2620	Testing charges for determination of sound levels
21.5.1.1(Pressure test-Type test (For Transformers up to 200 kVA ))	-	10000	Testing charges up to 100kVA is Rs.10000, from 100kVA up to 200kVA is Rs.6000
21.5.1.2(Pressure test-routine test (For Transformers up to 200 kVA ))	-	5000	Testing charges up to 100kVA is Rs.5000, from 100kVA and up to 200kVA is Rs.3000
21.5.3.1(For Single Phase Distribution Transformers Up to Including 25 kVA : pressure test (type test))	-	6000	Testing charges for pressure test( type test)
21.5.3.2(For Single Phase Distribution Transformers Up to Including 25 kVA : pressure test (routine test))	-	3000	Testing charges for pressure test ( routine test)
21.5.3.3(Oil leakage test (routine test))	-	5000	Testing charges for oil leakage test ( routine test)
13.1(Marking (Rating Plates))	-	1000	Testing charges for Marking ( Rating plates)
13.2(Terminal Marking Plate)	-	1000	Testing charges for Terminal Marking Plate
13.3(Marking )	-	1000	Testing charges for Marking
13.4(Marking)	-	1000	Testing charges for Marking
13.4.1(Marking)	-	1000	Testing charges for Marking
14.1(MOUNTING ARRANGEMENT)	-	1000	Testing charges for Mounting arrangement
14.4(MOUNTING ARRANGEMENT)	-	1000	Testing charges for Mounting arrangement
15.1.1(TRANSFORMER TANK : Construction)	-	800	Testing charges for Transformer tank : construction
15.1.2(TRANSFORMER TANK : Construction)	-	800	Testing charges for Transformer tank : construction
15.1.3(TRANSFORMER TANK : Construction)	-	800	Testing charges for Transformer tank : construction
15.1.4(TRANSFORMER TANK : Construction)	-	800	Testing charges for Transformer tank : construction
15.1.5(TRANSFORMER TANK : Construction)	-	800	Testing charges for Transformer tank : construction
21.4 e(BDV and moisture content of oil in the transformer)	-	1990	Testing charges for BDV and moisture content of oil in the transformer
21.4 d(Paint adhesion tests)	-	4830	Testing charges for Paint adhesion tests
21.4 c(No load current at 112.5 percent voltage.)	-	1600	Testing charges for No load current at 112.5 percent voltage
11(Minimum clearance in Air)	-	1000	Testing charges for Minimum clearance in Air
16(Conservator for Non-sealed type Transformers)	-	1000	Testing charges for Conservator for Non-sealed type Transformers
20(Fittings)	-	2000	Testing charges for Fittings (Standard Fitting 1000/- & Optional Fitting 1000/-)

22 Dec, 2027

-
-

1618

Aaditech Test and Calibration Lab LLP

8179926

IS 13487 (2024)

Irrigation Equipment — Emitters — Specification

All

5250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Connections)	-	250	-
Cl-5.2(Emitter Ends)	-	250	-
Cl-5.3(Materials)	-	0	-
Cl-6.1(Test Specimens)	-	0	-
Cl-6.2.1(polyethylene pipe)	-	0	-
Cl-6.2.2("grease or chemicals ")	-	0	-
Cl-6.2.3(water temperature)	-	1000	-
Cl-6.3(Accuracy or Measuring Devices)	-	500	-
Cl-7.1(Construction and Workmanship)	-	500	-
Cl-7.2(Flow Paths in Emitter)	-	500	-
Cl-7.3(Resistance to Hydrostatic Pressure)	-	1500	-
Cl-7.4(Emitter Pull-Out)	-	1000	-
Cl-7.4.1(In-Line Emitters)	-	1000	-
Cl-7.4.2(On-Line Emitters)	-	1000	-
Cl-8.1.1(Uniformity of Emission Rate)	-	1000	-
Cl-8.1.2(Emission Rate as Function of Inlet Pressure)	-	1000	-
Cl-8.1.3(Determination of Emitter Exponent)	-	1000	-
Cl-9(Marking)	-	0	-

-
Included w.e.f 17.03.2026

1619

National Soil Testing and Research Laboratories, Panchkula

9182936

IS 18573 (2024)

Cold formed welded carbon steel square and rectangular hollow sections for mechanical, general engineering and decorative purposes ï¿½ Specification

YST-160, YST-210, YST-240, YST-310, YST-355

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 3.0(Types)	-	1000	-
Clause.4.0(Carbon)	-	1000	-
Clause.4.0(Sulphur)	-	1000	-
Clause.4.0(Sulphur)	-	1000	-
Clause.4.0(Phosphorus)	-	1000	-
Clause.4.0(Silicon)	-	1000	-
Clause.4.0(Manganese)	-	1000	-
Clause.5.0(Supply of Material)	-	1500	-
Clause.5.0(Supply of Material)	-	1500	-
Clause.6.0(Workmanship)	-	1500	-
Clause.7.0(Straightness)	-	1000	-
Clause.8.0(Basis of Calculation)	-	1000	-
Clause.9.0(Length)	-	1000	-
Clause.10.0(Dimensions and properties)	-	1500	-
Clause.10.0(Dimensions and properties)	-	1500	-
Clause.11.0(General)	-	1000	-
Clause.11.0(Outside Dimension)	-	1000	-
Clause.11.0(Thickness)	-	1000	-
Clause.11.0(Thickness)	-	1000	-
Clause.11.0(Concavity and Convexity)	-	1500	-
Clause.11.0(Squareness of Sides)	-	1500	-
Clause.11.0(External Corner Radiius)	-	1500	-
Clause.11.0(Straightness and twist)	-	5000	-
Clause.12.0(Dimension Tolerances)	-	2000	-
Clause.12.0(Dimension Tolerances)	-	1500	-
Clause.13.0(Surface Protection)	-	1500	-
Clause.14.0(Testing)	-	2500	-
Clause.15.0(Tensile test)	-	1500	-
Clause.15.0(Yield strength)	-	1500	-
Clause.15.0(Elognation Percent)	-	1500	-
Clause.18.0(Marking)	-	1500	-
6(Workmanship)	-	1500	-
10(Dimensions and Properties)	-	2500	-
11(Measurement of Shape and Size)	-	1500	-
13(Surface Protection)	-	2000	-
15(Tensile Test)	-	1500	-
12(Dimensions and Tolerances)	-	2000	-
Clause. 3.0(Types)	-	0	-
Clause.4.0(Carbon)	-	1000	-
Clause.4.0(Sulphur)	-	1000	-
Clause.4.0(Sulphur)	-	1000	-
Clause.4.0(Phosphorus)	-	1000	-
Clause.4.0(Silicon)	-	1000	-
Clause.4.0(Manganese)	-	1000	-
Clause.5.0(Supply of Material)	-	2500	-
Clause.5.0(Supply of Material)	-	2500	-
Clause.6.0(Workmanship)	-	1500	-
Clause.7.0(Straightness)	-	1000	-
Clause.8.0(Basis of Calculation)	-	1500	-
Clause.9.0(Length)	-	1000	-
Clause.10.0(Dimensions and properties)	-	1000	-
Clause.10.0(Dimensions and properties)	-	1000	-
Clause.11.0(General)	-	1500	-
Clause.11.0(Outside Dimension)	-	1000	-
Clause.11.0(Thickness)	-	1000	-
Clause.11.0(Thickness)	-	1000	-
Clause.11.0(Concavity and Convexity)	-	1000	-
Clause.11.0(Squareness of Sides)	-	1000	-
Clause.11.0(External Corner Radiius)	-	1500	-
Clause.11.0(Straightness and twist)	-	1500	-
Clause.12.0(Dimension Tolerances)	-	1000	-
Clause.12.0(Dimension Tolerances)	-	1000	-
Clause.13.0(Surface Protection)	-	2000	-
Clause.14.0(Testing)	-	1500	-
Clause.15.0(Tensile test)	-	1500	-
Clause.15.0(Yield strength)	-	1500	-
Clause.15.0(Elognation Percent)	-	1500	-
Clause.18.0(Marking)	-	1500	-
6(Workmanship)	-	2500	-
10(Dimensions and Properties)	-	1000	-
11(Measurement of Shape and Size)	-	1000	-
13(Surface Protection)	-	2000	-
15(Tensile Test)	-	1000	-
12(Dimensions and Tolerances)	-	1000	-

-
included w.e.f 17.03.2026

1620

CIMEC Infralabs Private Limited

8195606

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

Nominal Size: up to & including 36 mm. All Grades

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 9.4(Load In Other Direction From Bend)	-	800	-
Cl 9.3(Load In One Direction)	-	500	-
Cl 7.2(Weight)	-	500	-
Cl 5(Deformations and Surface Characteristics)	-	500	-
Cl 9.4(Load In Other Direction From Bend)	-	800	-
Cl 9.3(Load In One Direction)	-	500	-
Cl 7.2(Weight)	-	500	-
Cl 5(Deformations and Surface Characteristics)	-	500	-
Cl 9.4(Load In Other Direction From Bend)	-	800	-
Cl 9.3(Load In One Direction)	-	500	-
Cl 8.1(UTM)	-	1500	-
Cl 7.2(Weight)	-	500	-
Cl 5(Deformations and Surface Characteristics)	-	500	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON +EQUIVELENT )	-	400	-
4.1(Sulphur and phosphorous)	-	400	-
4.1(CE)	-	400	-
4.1( Nitrogen%)	-	800	-
4.1(Ni)	-	400	-
4.1(Mo)	-	400	-
4.1(Cr)	-	400	-
4.1( Ti)	-	400	-
4.1(V)	-	400	-
4.1( Nb)	-	400	-
4.1( Aluminium %)	-	400	-
4.1( Copper %)	-	400	-
4.1(Silicon %)	-	400	-
4.1(Sulphur %)	-	400	-
4.1(Phosphorus %)	-	400	-
4.1(Manganese %)	-	400	-
4.1(Carbon %)	-	400	-
Cl.9.4 & Cl. 9.4.1(Rebend test)	-	800	-
Cl. 9.3, Table 4(Bend Test )	-	500	-
Cl. 8.1 Table 3(Elongation, percentage)	-	1000	-
Cl. 8.1 Table 3(TS/YS ratio)	-	1000	-
Cl. 8.1 Table 3(Tensile Strength (TS))	-	1000	-
Cl. 8.1 Table 3(Yield Stress (YS))	-	1000	-
Cl. 7.2 Table -2 (Nominal Mass)	-	500	-
Cl. 6.1(Nominal Size)	-	200	-
Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar))	-	500	-
Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), )	-	500	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR+PHOSPHUR)	-	400	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 MANGANESE)	-	400	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 NITROGEN)	-	500	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 PHOSPHURS)	-	400	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR)	-	400	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON )	-	400	-
Cl.4.2 of IS 1786 (Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	-
Cl.4.2 of IS 1786 (Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	-
Cl.4.2 of IS 1786 (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	-
Cl.4.2 of IS 1786 (Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	-
Cl.4.2 of IS 1786 (Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	-
Cl.4.2 of IS 1786 (Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	-
Cl.4.2 of IS 1786 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	-
Cl.4.2 of IS 1786 (Grade:- Fe 415D,Fe 415S, Fe 500D,Fe 500S,Fe 550D)(Carbon Equivalent)	-	400	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur & Phosphorous)	-	400	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Phosphorous- IS 228)	-	400	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur-IS 228)	-	400	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Carbon-IS 228)	-	400	-
8.18.1 Table 3(Total elongation at maximum force)	-	1000	-
Cl 5(Deformations and Surface Characteristics)	-	500	-
5.7(PullOut (Bond Test))	-	3000	-
4.2(Niobium (Nb))	-	400	-
4.2(Boron (B))	-	400	-
Cl. 5.7(Average compressive strength of cubes at 28 days)	-	3000	-
Cl. 5.7(Bond Strength at 0.25 mm slip)	-	3000	-
Cl. 5.7(Date of testing of concrete cubes)	-	1000	-
Cl. 5.7(Date of casting of concrete cubes)	-	1000	-
Cl. 8.1 Table 3(TS/YS Ratio)	-	1000	-
Cl. 5.3 (b)(The ribs contributing the projected area - Transverse Ribs)	-	500	-
Cl. 5.3 (a)(The ribs contributing the projected area - Longitudinal Ribs)	-	500	-
Cl. 8.1 Table 3(Maximum Extension)	-	1000	-
Cl. 8.1 Table 3(Total Elongation at Maximum Force)	-	1000	-
Cl. 6.2, 6.3 Table 1(Gross Cross Sectional Area, A)	-	500	-
Cl. 4.3(Visual Inspection.)	-	200	-
Cl. 5.2(Surface Characteristics)	-	500	-
Clause 9.4(Rebend Test)	-	800	-
Clause 6.3(Effective Cross-sectional Area)	-	500	-
Clause 8.1(Table 3)(Total Elongation at Maximum Force)	-	1000	-
Cl 9.4(Load In Other Direction From Bend)	-	800	-
Cl 9.3(Load In One Direction)	-	500	-
Cl 8.1(UTM)	-	1500	-
Cl 7.2(Weight)	-	500	-
Cl 5(Deformations and Surface Characteristics)	-	500	-
Cl 5(Deformations and Surface Characteristics)	-	500	-
Cl 7.2(Weight)	-	500	-
Cl 8.1(UTM)	-	1500	-
Cl 9.3(Load In One Direction)	-	500	-
Cl 9.4(Load In Other Direction From Bend)	-	800	-
13(Identification and marking)	-	200	-
5.7(Pull-out test - IS:2770(P1))	-	3000	-
7.0 & 7.1(Specified lengths - SOP MT-23)	-	200	-
8.0 & 8.1("Total elongation at maximum force on 5.65 vSo mm GL. ")	-	1000	-
4.3(Rolling and cold working of bars/wire)	-	200	-
7.1(Specified length)	-	200	-
9.1(Preparation of test sample)	-	500	-
9.5(Retest)	-	3000	-
12(Inspection)	-	200	-
Clause 4.2 Note 2, Amendment 1 & 3(Nb+V+B+Ti)	-	1000	-
Clause 4.2 Note 3, Amendment 1 & 3(Cr+Cu+Ni+Mo+P)	-	1000	-
Clause 4.2, Amendment 3 Note 4("In order to ascertain whether sufficient quantities of nitrogen binding elements are present, following formula may be used, where all elements are in ppm. (N−120)< (Al free/10)+((Ti+V)/7)+(Nb/14)")	-	500	-
1()	-	200	-
9.2(Tensile test,IS:1608(Pt1)-2018)	-	1000	-
Cl 5(Deformations and Surface Characteristics)	-	-	-
Cl.4.2 of IS 1786 (Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-	-
Cl.4.2 of IS 1786 (Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-	-
Cl.4.2 of IS 1786 (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-	-
Cl.4.2 of IS 1786 (Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-	-
Cl.4.2 of IS 1786 (Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-	-
Cl.4.2 of IS 1786 (Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-	-
Cl.4.2 of IS 1786 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-	-
Cl.4.2 of IS 1786 (Grade:- Fe 415D,Fe 415S, Fe 500D,Fe 500S,Fe 550D)(Carbon Equivalent)	-	-	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur & Phosphorous)	-	-	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Phosphorous- IS 228)	-	-	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur-IS 228)	-	-	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Carbon-IS 228)	-	-	-
8.18.1 Table 3(Total elongation at maximum force)	-	-	-
Cl 5(Deformations and Surface Characteristics)	-	-	-
5.7(PullOut (Bond Test))	-	-	-
4.2(Niobium (Nb))	-	-	-
4.2(Boron (B))	-	-	-
Cl. 5.7(Average compressive strength of cubes at 28 days)	-	-	-
Cl. 5.7(Bond Strength at 0.25 mm slip)	-	-	-
Cl. 5.7(Date of testing of concrete cubes)	-	-	-
Cl. 5.7(Date of casting of concrete cubes)	-	-	-
Cl. 8.1 Table 3(TS/YS Ratio)	-	-	-
Cl. 5.3 (b)(The ribs contributing the projected area - Transverse Ribs)	-	-	-
Cl. 5.3 (a)(The ribs contributing the projected area - Longitudinal Ribs)	-	-	-
Cl. 8.1 Table 3(Maximum Extension)	-	-	-
Cl. 8.1 Table 3(Total Elongation at Maximum Force)	-	-	-
Cl. 6.2, 6.3 Table 1(Gross Cross Sectional Area, A)	-	-	-
Cl. 4.3(Visual Inspection.)	-	-	-
Cl. 5.2(Surface Characteristics)	-	-	-
Clause 9.4(Rebend Test)	-	-	-
Clause 6.3(Effective Cross-sectional Area)	-	-	-
Clause 8.1(Table 3)(Total Elongation at Maximum Force)	-	-	-
Cl 9.4(Load In Other Direction From Bend)	-	-	-
Cl 9.3(Load In One Direction)	-	-	-
Cl 8.1(UTM)	-	-	-
Cl 7.2(Weight)	-	-	-
Cl 5(Deformations and Surface Characteristics)	-	-	-
Cl 5(Deformations and Surface Characteristics)	-	-	-
Cl 7.2(Weight)	-	-	-
Cl 8.1(UTM)	-	-	-
Cl 9.3(Load In One Direction)	-	-	-
Cl 9.4(Load In Other Direction From Bend)	-	-	-
13(Identification and marking)	-	-	-
5.7(Pull-out test - IS:2770(P1))	-	-	-
7.0 & 7.1(Specified lengths - SOP MT-23)	-	-	-
8.0 & 8.1("Total elongation at maximum force on 5.65 vSo mm GL. ")	-	-	-
4.3(Rolling and cold working of bars/wire)	-	-	-
7.1(Specified length)	-	-	-
9.1(Preparation of test sample)	-	-	-
9.5(Retest)	-	-	-
12(Inspection)	-	-	-
Clause 4.2 Note 2, Amendment 1 & 3(Nb+V+B+Ti)	-	-	-
Clause 4.2 Note 3, Amendment 1 & 3(Cr+Cu+Ni+Mo+P)	-	-	-
Clause 4.2, Amendment 3 Note 4("In order to ascertain whether sufficient quantities of nitrogen binding elements are present, following formula may be used, where all elements are in ppm. (N−120)< (Al free/10)+((Ti+V)/7)+(Nb/14)")	-	-	-
1()	-	-	-
9.2(Tensile test,IS:1608(Pt1)-2018)	-	-	-
Cl 6.1(Length, Width & Thickness)	-	-	-
Cl 6.1(Length, Width & Thickness)	-	-	-
Cl 6.1(Length, Width & Thickness)	-	-	-
Cl 6.1(Length, Width & Thickness)	-	-	-
Cl 6.1(Length, Width & Thickness)	-	-	-

14 Jan, 2029

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number