BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

11293 Results

S.No.

Lab Name

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

1561

CIPET KOCHI

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

22759 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Classification by appearance)	-	225	25% discount on test charges
Cl-5.2, Table- 1 (i)(Blister)	-	0	Included in classification by appearance
Cl-5.2, Table- 1 (ii)(Checks)	-	0	Included in classification by appearance
Cl-5.2, Table- 1 (iii)(Discolouration)	-	0	Included in classification by appearance
Cl-5.2, Table- 1 (iv)(Dote)	-	0	Included in classification by appearance
Cl-5.2, Table- 1 (v)(Insect hole)	-	0	Included in classification by appearance
Cl-5.2, Table- 1 (vi)(Joints)	-	0	Included in classification by appearance
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	0	Included in classification by appearance
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	0	Included in classification by appearance
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	0	Included in classification by appearance
Cl-5.2, Table- 1 (x)(Knots (tight))	-	0	Included in classification by appearance
Cl-5.2, Table- 1 (xi)(Patches)	-	0	Included in classification by appearance
Cl-5.2, Table- 1 (xii)(Splits)	-	0	Included in classification by appearance
Cl-5.2, Table- 1 (xiii)(Swirl)	-	0	Included in classification by appearance
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	0	Included in classification by appearance
Cl-6.1(Timber)	-	0	Included in classification by appearance
Cl-6.2(Adhesive)	-	0	Included in classification by appearance
Cl-7.2.1(Thickness of veneers)	-	0	Included in classification by appearance
Cl-7.2.3(Grain Direction)	-	0	Included in classification by appearance
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	0	Included in classification by appearance
Cl-7.2.5.2(Splits)	-	0	Included in classification by appearance
Cl-7.2.5.3(Overlap)	-	0	Included in classification by appearance
Cl-8.1(Dimensions -length)	-	375	25% discount on test charges
Cl-8.2(Thickness of the plywood boards)	-	187.5	25% discount on test charges
Cl-8.3(Squareness)	-	375	25% discount on test charges
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	2400	Specimen Preparation charges included and 25 % discount on test charges
Cl-11.3.2(Mycological Test)	-	3750	25% discount on test charges
Cl-11.4(Moisture Content)	-	675	25% discount on test charges
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	2650	Specimen Preparation charges included and 25 % discount on test charges
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	2650	Specimen Preparation charges included and 25 % discount on test charges
Cl-11.6(Formaldehyde Content Test)	-	2250	25% discount on test charges
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	3750	25% discount on test charges
Cl-9(WORKMANSHIP AND FINISH)	-	0	Included in classification by appearance
Cl-7.2.4(Scarf Joints)	-	0	Included in classification by appearance
Cl-5.1(Classification by appearance)	-	225	-
Cl-5.2, Table- 1 (i)(Blister)	-	0	-
Cl-5.2, Table- 1 (ii)(Checks)	-	0	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	0	-
Cl-5.2, Table- 1 (iv)(Dote)	-	0	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	0	-
Cl-5.2, Table- 1 (vi)(Joints)	-	0	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	0	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	0	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	0	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	0	-
Cl-5.2, Table- 1 (xi)(Patches)	-	0	-
Cl-5.2, Table- 1 (xii)(Splits)	-	0	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	0	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	0	-
Cl-6.1(Timber)	-	0	-
Cl-6.2(Adhesive)	-	0	-
Cl-7.2.1(Thickness of veneers)	-	0	-
Cl-7.2.3(Grain Direction)	-	0	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	0	-
Cl-7.2.5.2(Splits)	-	0	-
Cl-7.2.5.3(Overlap)	-	0	-
Cl-8.1(Dimensions -length)	-	375	-
Cl-8.2(Thickness of the plywood boards)	-	187.5	-
Cl-8.3(Squareness)	-	375	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	2400	-
Cl-11.3.2(Mycological Test)	-	3750	-
Cl-11.4(Moisture Content)	-	375	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	2650	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	2650	-
Cl-11.6(Formaldehyde Content Test)	-	2250	-
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	3750	-
Cl-9(WORKMANSHIP AND FINISH)	-	0	-
Cl-7.2.4(Scarf Joints)	-	0	-

31 Dec, 2026

-
Included w.e.f. 13.02.2025

1562

Institute for Auto Parts and Hand Tools Technology

IS 7485 : Part 2 (2018)

Countersunk flat head screws (common head style) with type H or Type Z Cross Recess - Product Grade A part 2 Steel Screws of Property Class 8.8, Stainless Steel Screws and Non - Ferrous Metal Screws ( Third Revision)

All Grade / Type / Size / Designation as per IS 7485-2

21670 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Dimensions)	-	1270	-
4, table 2(Material)	-	1200	-
4, table 2(Thread)	-	0	-
4, table 2(Mechanical property)	-	19200	-
4, table 2(Tolerances)	-	0	-
4, table 2(Cross recess)	-	0	-
4, table 2(Finish - coating)	-	0	-
4, table 2(Surface integrity)	-	0	-
4, table 2(Acceptability)	-	0	-
5(Designation)	-	0	-
3(Dimensions)	-	0	-
4, table 2(Material)	-	0	-
4, table 2(Thread)	-	0	-
4, table 2(Mechanical property)	-	0	-
4, table 2(Tolerances)	-	0	-
4, table 2(Cross recess)	-	0	-
4, table 2(Finish - coating)	-	0	-
4, table 2(Surface integrity)	-	0	-
4, table 2(Acceptability)	-	0	-
5(Designation)	-	0	-

17 Feb, 2028

-
-

1563

Institute for Auto Parts and Hand Tools Technology

IS 7485 : Part 1 (2018)

Countersunk Flat Head Screws (Common head Style) With Type H or Type Z Cross Recess - Product Grade A Part 1 Steel Screws of Property Class 4.8 ( Third Revision)

All Grade / Type / Size / Designation as per IS 7485-1

13940 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Dimensions)	-	1270	-
4, table 2(Material)	-	1200	-
4, table 2(General requirements)	-	0	-
4, table 2(Thread)	-	0	-
4, table 2(Mechanical property)	-	11470	-
4, table 2(Tolerances)	-	0	-
4, table 2(Cross recess)	-	0	-
4, table 2(Finish - coating)	-	0	-
4, table 2(Surface integrity)	-	0	-
4, table 2(Acceptability)	-	0	-
5(Designation)	-	0	-
3(Dimensions)	-	0	-
4, table 2(Material)	-	0	-
4, table 2(General requirements)	-	0	-
4, table 2(Thread)	-	0	-
4, table 2(Mechanical property)	-	0	-
4, table 2(Tolerances)	-	0	-
4, table 2(Cross recess)	-	0	-
4, table 2(Finish - coating)	-	0	-
4, table 2(Surface integrity)	-	0	-
4, table 2(Acceptability)	-	0	-
5(Designation)	-	0	-

17 Feb, 2028

-
Included w.e.f 03.06.2025

1564

CENTRAL POWER RESEARCH INSTITUTE

IS/IEC 60947 : Part 4 : Sec 1 (2018)

Low-Voltage switchgear and controlgear : Part 4-1 Contactors and motor starters electromechanical contactors and motor-Starters

2103920 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.2.2(Glow wire testing)	-	6300	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one type
8.1.4(Clearances and creepage distances)	-	1800	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.2.1.2(Limits of operation of contactors and power-operated starters)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.2.1.3(Limits of operation of under-voltage relays and releases)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.2.1.4(Limits of operation of shunt-coil operated releases (shunt trip))	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.2.1.5(Limits of operation of current sensing relays and releases)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.2.1.5.1(Limits of operation of time-delay overload relays when all poles are energized)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.2.1.5.1.1(General tripping requirements of overload relays)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.2.1.5.1.2(Thermal memory test verification)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.2.1.5.2(Limits of operation of three-pole time-delay overload relays energized on two poles)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.2.1.5.3(Limits of operation of instantaneous magnetic overload relays)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.2.1.5.4(Limits of operation of under-current relays and releases for automatic change over)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.2.1.5.4.1(Limits of operation of under-current relays)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.2.1.5.4.2(Limits of operation of automatic change over by under-current relays)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.2.2(Temperature-rise)	-	70270	Charges for one rating upto 200A ₹19450 201A to 1000A ₹26810/- 1001A to 2000A ₹36110 2001A to 3000A ₹46230/- 3001A to 4000A ₹58270/- 4001A to 5000A ₹70270/- per rating without GST
8.2.2.3(Accessible parts)	-	70270	Charges for one rating upto 200A ₹19450 201A to 1000A ₹26810/- 1001A to 2000A ₹36110 2001A to 3000A ₹46230/- 3001A to 4000A ₹58270/- 4001A to 5000A ₹70270/- per rating without GST
8.2.2.4(Ambient air temperature)	-	70270	Charges for one rating upto 200A ₹19450 201A to 1000A ₹26810/- 1001A to 2000A ₹36110 2001A to 3000A ₹46230/- 3001A to 4000A ₹58270/- 4001A to 5000A ₹70270/- per rating without GST
8.2.2.5(Main circuit)	-	70270	Charges for one rating upto 200A ₹19450 201A to 1000A ₹26810/- 1001A to 2000A ₹36110 2001A to 3000A ₹46230/- 3001A to 4000A ₹58270/- 4001A to 5000A ₹70270/- per rating without GST
8.2.2.6(Control circuits)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.2.2.7.1(Uninterrupted and eight-hour duty windings)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.2.3(Dielectric properties)	-	54050	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one rating SP ₹14970 SPN/DP ₹33010 TP ₹43530 FP ₹54050
8.2.3.2(Voltage limiting components between circuits)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.2.4.3.1(Mechanical durability)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.2.4.3.2(Electrical durability)	-	27000	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.2.4.4(Overload current withstand capability of contactors)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.2.4.5(Coil power consumption)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.2.4.6(Pole impedance)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
9.3.3.2(Operating limits)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
9.3.3.2.1.2(Coil power consumption)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
9.3.3.2.1.3(Pole impedance)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
9.3.3.2.2(Relays and releases)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.1.2(Materials)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.1.2.1(General materials requirements)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.1.3(Current-carrying parts and their connections)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.1.5.1(Insulation)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.1.5.2(Direction of movement)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.1.5.4(Protection)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.1.5.3(Mounting)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.1.8(Terminals)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.1.8.1(General)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.1.8.2(Terminal identification and marking)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.1.9(Additional requirements for equipment provided with a neutral pole)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.1.10(Provisions for protective earthing)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.1.11(Enclosures for equipment)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.1.11.1(Design)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.1.11.2(Insulation)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.1.12(Degrees of protection of enclosed equipment)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.1.13(Conduit pull-out, torque and bending with metallic conduits)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.2(Performance requirements)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.2.1(Operating conditions)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.2.1.1.1(General conditions)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.2.4.7(Ability of a MPSD to make and break under short-circuit conditions)	-	101010	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one rating without GST SP, SPN/DP & TPN upto 10kA ₹40890
8.2.5.1(Performance under short-circuit conditions)	-	101010	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one rating without GST SP, SPN/DP & TPN upto 10kA ₹40890 FP upto 10kA is ₹81770 SP, SPN/DP & TPN 10kA to 50kA ₹50550
8.2.5.3(Co-ordination test between AC-3e rated starter and associated SCPD)	-	101010	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one rating without GST SP, SPN/DP & TPN upto 10kA ₹40890 FP upto 10kA is ₹81770 SP, SPN/DP & TPN 10kA to 50kA ₹50550
8.2.5.4(Co-ordination between a MPSD and another short-circuit protective device)	-	101010	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one rating without GST SP, SPN/DP & TPN upto 10kA ₹40890 FP upto 10kA is ₹81770
9.3.3.3.1(Ambient air temperature)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
9.3.3.3.2(Measurement of the temperature of parts)	-	70270	Charges for one rating upto 200A ₹19450 201A to 1000A ₹26810/- 1001A to 2000A ₹36110 2001A to 3000A ₹46230/- 3001A to 4000A ₹58270/- 4001A to 5000A ₹70270/- per rating without GST
9.3.3.3.3(Temperature-rise of a part)	-	70270	Charges for one rating upto 200A ₹19450 201A to 1000A ₹26810/- 1001A to 2000A ₹36110 2001A to 3000A ₹46230/- 3001A to 4000A ₹58270/- 4001A to 5000A ₹70270/- per rating without GST
9.3.3.3.4(Temperature-rise of the main circuit)	-	70270	Charges for one rating upto 200A ₹19450 201A to 1000A ₹26810/- 1001A to 2000A ₹36110 2001A to 3000A ₹46230/- 3001A to 4000A ₹58270/- 4001A to 5000A ₹70270/- per rating without GST
9.3.3.3.5(Temperature-rise of control circuits)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
9.3.3.3.6(Temperature-rise of coils and electromagnets)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
9.3.3.3.7(Temperature-rise of auxiliary circuits)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
9.3.3.3.8(Temperature-rise of starting resistors for rheostatic rotor starters)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
9.3.3.6(Operational performance capability)	-	27000	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
9.3.4.2.2(prospective current)	-	101010	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one rating without GST SP, SPN/DP & TPN upto 10kA ₹40890 FP upto 10kA is ₹81770 SP, SPN/DP & TPN 10kA to 50kA ₹50550
9.3.4.2.3(Test at the rated conditional short-circuit current Iq)	-	101010	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one rating without GST SP, SPN/DP & TPN upto 10kA ₹40890 FP upto 10kA is ₹81770 SP, SPN/DP & TPN 10kA to 50kA ₹50550
9.3.5(Overload current withstand capability of contactors)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
9.3.6.2(Operation and operating limits)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
9.3.6.3(Dielectric tests)	-	14000	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one rating SP ₹3000 SPN/DP ₹8000 TP ₹11000 FP ₹14000
9.3.6.4(Mechanical operation tests of a MPSD)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
F.7.2(Tests on products in a new condition)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
F.7.3(Test after conventional operational performance)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.2.4 of IEC 60947-1:2007 (Sequence 5)(Verification of Mechanical properties of terminals)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
Annex C of IEC 60947-1:2007 (Sequence 5)(Verification of Degree of protection of enclosed contactors and starters)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
M.9.11(Clearance and creepage distances)	-	1800	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
P.2.3(Verification of operational performance capability)	-	27000	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
P.2.4.2(Test voltage)	-	14000	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one rating SP ₹3000 SPN/DP ₹8000 TP ₹11000 FP ₹14000
P.2.4.3(Application of the test voltage)	-	14000	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one rating SP ₹3000 SPN/DP ₹8000 TP ₹11000 FP ₹14000
P.4(Test of MPSD for IT system)	-	101010	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one rating without GST SP, SPN/DP & TPN upto 10kA ₹40890 FP upto 10kA is ₹81770 SP, SPN/DP & TPN 10kA to 50kA ₹50550
Q.5.3(Selectivity determined by test)	-	101010	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one rating without GST SP, SPN/DP & TPN upto 10kA ₹40890 FP upto 10kA is ₹81770 SP, SPN/DP & TPN 10kA to 50kA ₹50550
8.1.2.2(Glow wire testing)	-	-	-
8.1.4(Clearances and creepage distances)	-	-	-
8.2.1.2(Limits of operation of contactors and power-operated starters)	-	-	-
8.2.1.3(Limits of operation of under-voltage relays and releases)	-	-	-
8.2.1.4(Limits of operation of shunt-coil operated releases (shunt trip))	-	-	-
8.2.1.5(Limits of operation of current sensing relays and releases)	-	-	-
8.2.1.5.1(Limits of operation of time-delay overload relays when all poles are energized)	-	-	-
8.2.1.5.1.1(General tripping requirements of overload relays)	-	-	-
8.2.1.5.1.2(Thermal memory test verification)	-	-	-
8.2.1.5.2(Limits of operation of three-pole time-delay overload relays energized on two poles)	-	-	-
8.2.1.5.3(Limits of operation of instantaneous magnetic overload relays)	-	-	-
8.2.1.5.4(Limits of operation of under-current relays and releases for automatic change over)	-	-	-
8.2.1.5.4.1(Limits of operation of under-current relays)	-	-	-
8.2.1.5.4.2(Limits of operation of automatic change over by under-current relays)	-	-	-
8.2.2(Temperature-rise)	-	-	-
8.2.2.3(Accessible parts)	-	-	-
8.2.2.4(Ambient air temperature)	-	-	-
8.2.2.5(Main circuit)	-	-	-
8.2.2.6(Control circuits)	-	-	-
8.2.2.7.1(Uninterrupted and eight-hour duty windings)	-	-	-
8.2.3(Dielectric properties)	-	-	-
8.2.3.2(Voltage limiting components between circuits)	-	-	-
8.2.4.3.1(Mechanical durability)	-	-	-
8.2.4.3.2(Electrical durability)	-	-	-
8.2.4.4(Overload current withstand capability of contactors)	-	-	-
8.2.4.5(Coil power consumption)	-	-	-
8.2.4.6(Pole impedance)	-	-	-
9.3.3.2(Operating limits)	-	-	-
9.3.3.2.1.2(Coil power consumption)	-	-	-
9.3.3.2.1.3(Pole impedance)	-	-	-
9.3.3.2.2(Relays and releases)	-	-	-
8.1.2(Materials)	-	-	-
8.1.2.1(General materials requirements)	-	-	-
8.1.3(Current-carrying parts and their connections)	-	-	-
8.1.5.1(Insulation)	-	-	-
8.1.5.2(Direction of movement)	-	-	-
8.1.5.4(Protection)	-	-	-
8.1.5.3(Mounting)	-	-	-
8.1.8(Terminals)	-	-	-
8.1.8.1(General)	-	-	-
8.1.8.2(Terminal identification and marking)	-	-	-
8.1.9(Additional requirements for equipment provided with a neutral pole)	-	-	-
8.1.10(Provisions for protective earthing)	-	-	-
8.1.11(Enclosures for equipment)	-	-	-
8.1.11.1(Design)	-	-	-
8.1.11.2(Insulation)	-	-	-
8.1.12(Degrees of protection of enclosed equipment)	-	-	-
8.1.13(Conduit pull-out, torque and bending with metallic conduits)	-	-	-
8.2(Performance requirements)	-	-	-
8.2.1(Operating conditions)	-	-	-
8.2.1.1.1(General conditions)	-	-	-
8.2.4.7(Ability of a MPSD to make and break under short-circuit conditions)	-	-	-
8.2.5.1(Performance under short-circuit conditions)	-	-	-
8.2.5.3(Co-ordination test between AC-3e rated starter and associated SCPD)	-	-	-
8.2.5.4(Co-ordination between a MPSD and another short-circuit protective device)	-	-	-
9.3.3.3.1(Ambient air temperature)	-	-	-
9.3.3.3.2(Measurement of the temperature of parts)	-	-	-
9.3.3.3.3(Temperature-rise of a part)	-	-	-
9.3.3.3.4(Temperature-rise of the main circuit)	-	-	-
9.3.3.3.5(Temperature-rise of control circuits)	-	-	-
9.3.3.3.6(Temperature-rise of coils and electromagnets)	-	-	-
9.3.3.3.7(Temperature-rise of auxiliary circuits)	-	-	-
9.3.3.3.8(Temperature-rise of starting resistors for rheostatic rotor starters)	-	-	-
9.3.3.6(Operational performance capability)	-	-	-
9.3.4.2.2(prospective current)	-	-	-
9.3.4.2.3(Test at the rated conditional short-circuit current Iq)	-	-	-
9.3.5(Overload current withstand capability of contactors)	-	-	-
9.3.6.2(Operation and operating limits)	-	-	-
9.3.6.3(Dielectric tests)	-	-	-
9.3.6.4(Mechanical operation tests of a MPSD)	-	-	-
F.7.2(Tests on products in a new condition)	-	-	-
F.7.3(Test after conventional operational performance)	-	-	-
8.2.4 of IEC 60947-1:2007 (Sequence 5)(Verification of Mechanical properties of terminals)	-	-	-
Annex C of IEC 60947-1:2007 (Sequence 5)(Verification of Degree of protection of enclosed contactors and starters)	-	-	-
M.9.11(Clearance and creepage distances)	-	-	-
P.2.3(Verification of operational performance capability)	-	-	-
P.2.4.2(Test voltage)	-	-	-
P.2.4.3(Application of the test voltage)	-	-	-
P.4(Test of MPSD for IT system)	-	-	-
Q.5.3(Selectivity determined by test)	-	-	-

30 Jun, 2027

-
Exclusions: 8.1.2.3 (Test based on flammability category), 8.1.14 (Limited energy source), 8.1.14.1 (General), 8.1.14.2 (Limited energy source with galvanic separation), 8.1.14.3 (Limited energy source with current limiting impedance), 8.1.15 (Stored charge energy circuit), 8.1.16 (Fault and abnormal conditions), 8.1.17 (Short-circuit and overload protection of ports), 8.3 (Electromagnetic compatibility (EMC)), 8.3.2 (Immunity), 8.3.3 (Emission), 9.1.5.2 (Environment tests), 9.2.2 (Electrical performance of screwless-type clamping units), 9.2.3 (Ageing test for screwless-type clamping unit), 9.2.4 (Limited energy source test), 9.2.5 (Breakdown of components), 9.2.5.2 (Breakdown of components test), 9.4.2 (Immunity), 9.4.2.2 (Electrostatic discharge), 9.4.2.3 (Radiated radio-frequency electromagnetic field), 9.4.2.4 (Conducted disturbances induced by radio-frequency fields), 9.4.2.5 (Electrical fast transient/bursts), 9.4.2.6 (Surges), 9.4.2.7 (Power frequency magnetic field), 9.4.2.8 (Voltage dips and short-time interruptions), 9.4.2.9 (Harmonics in the supply), 9.4.3 (Emission), H.3 (Limits of operation of control functions), H.4 (Test of the control functions), M.8.3 (Electromagnetic compatibility (EMC)), M.9.4 (Thermal cycling test), M.9.5 (Climatic test), M.9.7 (Critical load current test), N.3.2 (Touch current measurement)

1565

Institute for Auto Parts and Hand Tools Technology

IS 7483 (2018)

Pan Head Screws With Type H or Type Z Cross Recess - Product Grade A (Third Revision)

All Grade / Type / Size / Designation as per IS 7483

19670 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Dimensions)	-	1200	-
4, table 2(Material)	-	1200	-
4, table 2(General requirements)	-	0	-
4, table 2(Thread)	-	0	-
4, table 2(Mechanical property)	-	17270	-
4, table 2(Tolerances)	-	0	-
4, table 2(Cross recess)	-	0	-
4, table 2(Finish - coating)	-	0	-
4, table 2(Surface integrity)	-	0	-
4, table 2(Acceptability)	-	0	-
5(Designation)	-	0	-
3(Dimensions)	-	0	-
4, table 2(Material)	-	0	-
4, table 2(General requirements)	-	0	-
4, table 2(Thread)	-	0	-
4, table 2(Mechanical property)	-	0	-
4, table 2(Tolerances)	-	0	-
4, table 2(Cross recess)	-	0	-
4, table 2(Finish - coating)	-	0	-
4, table 2(Surface integrity)	-	0	-
4, table 2(Acceptability)	-	0	-
5(Designation)	-	0	-
3(Dimensions)	-	0	-
4, table 2(Material)	-	0	-
4, table 2(General requirements)	-	0	-
4, table 2(Thread)	-	0	-
4, table 2(Mechanical property)	-	0	-
4, table 2(Tolerances)	-	0	-
4, table 2(Cross recess)	-	0	-
4, table 2(Finish - coating)	-	0	-
4, table 2(Surface integrity)	-	0	-
4, table 2(Acceptability)	-	0	-
5(Designation)	-	0	-
3(Dimensions)	-	0	-
4, table 2(Material)	-	0	-
4, table 2(General requirements)	-	0	-
4, table 2(Thread)	-	0	-
4, table 2(Mechanical property)	-	0	-
4, table 2(Tolerances)	-	0	-
4, table 2(Cross recess)	-	0	-
4, table 2(Finish - coating)	-	0	-
4, table 2(Surface integrity)	-	0	-
4, table 2(Acceptability)	-	0	-
5(Designation)	-	0	-

17 Feb, 2028

-
Included w.e.f 03.06.2025

1566

Institute for Auto Parts and Hand Tools Technology

IS 18476 (2023)

Fasteners ï¿½ Hexagon Washer Head Drilling Screws with Tapping Screw Thread

All Grade / Type / Size / Designation as per IS 18476

17225 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 4.0(Dimenssions.)	-	1385	-
Clause. 4.0(Thread size.)	-	0	-
Clause. 4.0(Length)	-	0	-
Clause. 5.0(Material)	-	1200	-
Clause. 5.0(Thread)	-	0	-
Clause. 5.0(Tolerances)	-	0	-
Clause. 5.0(Mechnical and functional properties.)	-	14640	-
Clause. 5.0(Finish)	-	0	-
Clause. 5.0(Acceptability)	-	0	-
Clause.6.0(Designation)	-	0	-
Clause.6.0(Marking)	-	0	-

17 Feb, 2028

-
-

1567

Institute for Auto Parts and Hand Tools Technology

IS 18471 : Part 3 (2023)

Fasteners ï¿½ Cross Recessed Drilling Screws with Tapping Screw Thread Part 3 Raised Countersunk Head

All Grade / Type / Size / Designation as per IS 18471 (Part-III)

17650 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 3.0(Dimenssions.)	-	810	-
Clause. 3.0(Thread size.)	-	0	-
Clause. 3.0(Length)	-	0	-
Clause. 4.0(Material)	-	1200	-
Clause. 4.0(Thread)	-	0	-
Clause. 4.0(Cross recesses)	-	0	-
Clause. 4.0(Tolerances)	-	0	-
Clause. 4.0(Mechnical and functional properties.)	-	15640	-
Clause. 4.0(Finish)	-	0	-
Clause. 4.0(Acceptability)	-	0	-
Clause.5.0(Designation)	-	0	-
Clause.5.0(Marking)	-	0	-

17 Feb, 2028

-
-

1568

FARE Labs Pvt. Ltd.

IS 1165 (2022)

WHOLE MILK POWDER - SPECIFICATION (Sixth Revision of IS 1165)

31100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 3.7,Table 3, Sl No i)(Lead)	-	300	-
Clause 3.7,Table 3 ,Sl No ii)(Arsenic)	-	300	-
3.7, Table 3 (ii)(Arsenic - IS 11124)	-	0	-
3.7, Table 3 (i)(Lead -IS 12074)	-	0	-
Clause 3.7,Table 3,Sl No iii)(Aflaoxin)	-	1000	-
Clause 3.7,Table 3, Sl No iv)(Melamine)	-	1000	-
3.6(Pesticide residue)	-	100	-
4.8(Methyl Chlorophenoxy Acetic Acid (MCPA))	-	100	-
3.6(Sulfa Chloropyrazine)	-	0	-
3.6(Pesticide Residues)	-	0	-
3.6(2,4-Dichlorophenoxy Acetic acid)	-	100	-
3.6(Acephate (expressed as mixture of Methamidophos and acephate))	-	100	-
3.6(Acetamiprid)	-	100	-
3.6(Azoxystrobin)	-	100	-
3.6(Sum of benomyl & carbendazim expressed as carbendazim))	-	100	-
3.6(Bifenthrin)	-	100	-
3.6(Bitertanol)	-	100	-
3.6(Buprofezin)	-	100	-
3.6(Carbaryl)	-	100	-
3.6(Carbendazim)	-	100	-
3.6(Carbofuran (sum of carbofuran & 3-hydroxy carbofuran expressedas carbofuran))	-	100	-
3.6(Chlorantraniliprole)	-	100	-
3.6(Chlorothalonil)	-	100	-
3.6(Chlorpyriphos)	-	100	-
3.6(Chlothianidin (Chlothianidin & its metabolite Thiazolymethylguanidine(TMG) ,Thiazolymethylurea(TZMU),Methylnitroguanidine(MNG))	-	100	-
3.6(Cypermethrin (sum of isomers) (Fat soluble residue))	-	100	-
3.6(Deltamethrin (Decamethrin))	-	100	-
3.6(Dichlorvos (DDVP) (content of dichloroacetaldehyde (D.C.A.))	-	100	-
3.6(Difenoconazole)	-	100	-
3.6(Dimethoate)	-	100	-
3.6(Dinotefuron)	-	100	-
3.6(Mancozeb)	-	100	-
3.6(metiram as CS2)	-	100	-
3.6(Edifenphos)	-	100	-
3.6(Emamectin Benzoate)	-	100	-
3.6(Ethion (Residues to be determined as ethion & its oxygen analogue and expressed as ethion))	-	100	-
3.6(Ethofenprox (Etofenprox))	-	100	-
3.6(Fenpropathrin)	-	100	-
3.6(Fenvalerate (fat soluble residue))	-	100	-
3.6(Fipronil)	-	100	-
3.6(Flubendiamide)	-	100	-
3.6(Flusilazole)	-	100	-
3.6(Glufosinate Ammonium)	-	100	-
3.6(Imidacloprid)	-	100	-
3.6(Indoxacarb)	-	100	-
3.6(Kresoxim Methyl)	-	100	-
3.6(Methomyl)	-	100	-
3.6(Methyl Chlorophenoxy Acetic Acid (MCPA))	-	0	-
3.6(Metolachlor)	-	100	-
3.6(Monocrotophos)	-	100	-
3.6(Oxydemeton-Methyl)	-	100	-
3.6(Paraquat dichloride (Determined as Paraquatcations))	-	100	-
3.6(Penconazole)	-	100	-
3.6(Phenthoate)	-	100	-
3.6(Phorate (sum of phorate,its oxygen analogue and their sulphoxides & sulphones, expressed as Phorate))	-	100	-
3.6(Pirimiphos-methyl)	-	100	-
3.6(Propiconazole)	-	100	-
3.6(Pyraclostrobin)	-	100	-
3.6(Tebuconazole)	-	100	-
3.6(Thiacloprid)	-	100	-
3.6(Thiophanate-Methyl)	-	100	-
3.6(Thiamethoxam)	-	100	-
3.6(Triacontanol)	-	100	-
3.6(Triadimefon)	-	100	-
3.6(Trichlorfon)	-	100	-
3.6("Antibiotic and Veterinary drug residues ")	-	100	-
3.6(Ampicillin)	-	450	-
3.6(Apramycin)	-	450	-
3.6(Albendazole)	-	450	-
3.6(Chlotetracycline/Oxytetracycline/Tetracycline)	-	450	-
3.6(Ceftiofur)	-	450	-
3.6(Cefphactril)	-	450	-
3.6(Doramectin)	-	450	-
3.6(Diminazene)	-	450	-
3.6(Flunixin)	-	450	-
3.6(Febantel/Fenbendazole/Oxyfendazole)	-	450	-
3.6(Ivermectin)	-	450	-
3.6(Lincomycin)	-	450	-
3.6(Monensin)	-	450	-
3.6(Meloxicam)	-	450	-
3.6(Neomycin)	-	450	-
3.6(Oxyclozanide)	-	450	-
3.6(Parbendazole)	-	450	-
3.6(Praziquantel)	-	450	-
3.6(Spectinomycin)	-	450	-
3.6(Sulfadiazine)	-	450	-
3.6(Sulfanilamide)	-	450	-
3.6(Sulfaquinoxaline)	-	4500	-
3.6(Sulfadimidine)	-	450	-
3.6(Sulfa Chloropyrazine)	-	450	-
3.6(Thiabendazole)	-	450	-
3.6(Trimethoprim)	-	450	-
3.6(Tylosin)	-	450	-
3.6(Virginiamycin)	-	450	-
3.7, Table 3 (iii)(Aflatoxin M1 - ISO 14501 or ISO 14674 or any other international validated method)	-	0	-
3.7, Table 3 (iv)(Melamine - IS 16195)	-	0	-
Clause 3.5,Table 1 ,Sl No i)(Moisture)	-	300	-
Clause 3.5,Table 1 ,Sl No ii)(Total solids)	-	300	-
Clause 3.5,Table 1 ,Sl No iii)(Milk fat)	-	300	-
Clause 3.5,Table 1 ,Sl No iv)(Milk protein in milk solids not fat)	-	300	-
Clause 3.5,Table 1 ,Sl No v)(Insolubility index)	-	300	-
Clause 3.5,Table 1 ,Sl No vi)(Total ash(on dry basis))	-	300	-
Clause 3.5,Table 1 ,Sl No vii)(Titratable acidity (lactic acid),)	-	300	-
Clause 3.5,Table 1 ,Sl No viii)(Scorched particle)	-	300	-
3.5, Table 1 (i)(Moisture -IS 16072/IS 11623)	-	0	-
3.5, Table 1 (ii)(Total solids -IS 16072/IS 11623)	-	0	-
3.5, Table 1 (iii)(Milk Fat -IS 11721/IS 1224(P-2))	-	0	-
3.5, Table 1 (iv)(Milk protein in milk solids not fat-IS 11917)	-	0	-
3.5, Table 1 (v)(Insolubility index - IS 12759)	-	0	-
3.5, Table 1 (vi)(Total ash (on dry basis) - IS1165)	-	0	-
3.5, Table 1 (vii)(Titratable acidity (lactic acid), as ml of 0.1 N NaOH /10g solids not fat - IS 11765)	-	0	-
3.5, Table 1 (viii)(Scorched Particles - IS 13500)	-	0	-
3.2(Flavour and Taste)	-	300	-
3.3(extraneous matter)	-	1000	-
Clause 3.5,Table 2 ,Sl No i)(Aerobic plate count)	-	500	-
Clause 3.5,Table 2 ,Sl No ii)(Coliform Count)	-	500	-
Clause 3.5,Table 2 ,Sl No iii)(Staphylococcus aureus(Coagulase positive))	-	500	-
Clause 3.5,Table 2 ,Sl No iv)(Yeast and mould count)	-	500	-
Clause 3.5,Table 2 ,Sl No v)(Salmonella sp)	-	500	-
Clause 3.5,Table 2 ,Sl No vi)(Listeria monocytogenes)	-	700	-
Clause 3.5,Table 2 ,Sl No vii)(Bacillus cereus)	-	500	-
Clause 3.5,Table 2 ,Sl No viii)(Sulphite reducing clostridia)	-	500	-
Clause 3.5,Table 2 ,Sl No ix)(E. coli)	-	500	-
"3.5 Table 2 (i) "(Aerobic plate count-IS 5402 (Part 1):2021)	-	0	-
"3.5 Table 2 (ii) "(Coliform count-IS 5401 (Part 1):2012)	-	0	-
"3.5 Table 2 (iii) "(Staphylococcuus aureus-IS 5887 (Part 8/Sec-1))	-	0	-
"3.5 Table 2 (iv) "(Yeast & mould count-IS 5403)	-	0	-
"3.5 Table 2 (v) "(Salmonella sp.-IS 5887 (Part 3/ Section -1))	-	0	-
"3.5 Table 2 (vi) "(Listeria monocytogenes-IS 14988 (Part 1))	-	0	-
"3.5 Table 2 (vii) "(Bacillus cereus-IS 5887 (Part 6))	-	0	-
"3.5 Table 2 (viii) "(Sulphite reducing clostridia-ISO 15213)	-	0	-
"3.5 Table 2 (ix) "(Escherichia coli-IS 5887 (Part 1))	-	0	-
CL 3.4, Table 2 (i)(Aerobic Plate Count)	-	0	-
CL 3.4, Table 2 (ii)(Coliform Count)	-	0	-
CL 3.4, Table 2 (iii)(Staphylococcus aureus (Coagulase positive))	-	0	-
CL 3.4, Table 2 (iv)(Yeast and Mold Count)	-	0	-
CL 3.4, Table 2 (v)(Salmonella sp)	-	0	-
CL 3.4, Table 2 (vi)(Listeria monocytogenes)	-	0	-
CL 3.4, Table 2 (vii)(Bacillus cereus)	-	0	-
CL 3.4, Table 2 (ix)(E. coli)	-	0	-
3.1(Discription)	-	600	-
4(Packing)	-	600	-
5(Marking)	-	600	-
3.2(Flavour & Taste - IS 1165)	-	0	-
3.3(Free from lumps ,extraneous matter,vetetable oil/fat,mineral oil, thickening agents, added flavour and sweetening agent - IS 1165)	-	0	-
CL 3.4, Table 2 (viii)(Sulphite reducing clostridia)	-	0	-
Clause 3.7,Table 3, Sl No i)(Lead)	-	0	-
Clause 3.7,Table 3 ,Sl No ii)(Arsenic)	-	0	-
3.7, Table 3 (ii)(Arsenic - IS 11124)	-	0	-
3.7, Table 3 (i)(Lead -IS 12074)	-	0	-
Clause 3.7,Table 3,Sl No iii)(Aflaoxin)	-	0	-
Clause 3.7,Table 3, Sl No iv)(Melamine)	-	0	-
3.6(Pesticide residue)	-	0	-
4.8(Methyl Chlorophenoxy Acetic Acid (MCPA))	-	0	-
3.6(Sulfa Chloropyrazine)	-	0	-
3.6(Pesticide Residues)	-	0	-
3.6(2,4-Dichlorophenoxy Acetic acid)	-	0	-
3.6(Acephate (expressed as mixture of Methamidophos and acephate))	-	0	-
3.6(Acetamiprid)	-	0	-
3.6(Azoxystrobin)	-	0	-
3.6(Sum of benomyl & carbendazim expressed as carbendazim))	-	0	-
3.6(Bifenthrin)	-	0	-
3.6(Bitertanol)	-	0	-
3.6(Buprofezin)	-	0	-
3.6(Carbaryl)	-	0	-
3.6(Carbendazim)	-	0	-
3.6(Carbofuran (sum of carbofuran & 3-hydroxy carbofuran expressedas carbofuran))	-	0	-
3.6(Chlorantraniliprole)	-	0	-
3.6(Chlorothalonil)	-	0	-
3.6(Chlorpyriphos)	-	0	-
3.6(Chlothianidin (Chlothianidin & its metabolite Thiazolymethylguanidine(TMG) ,Thiazolymethylurea(TZMU),Methylnitroguanidine(MNG))	-	0	-
3.6(Cypermethrin (sum of isomers) (Fat soluble residue))	-	0	-
3.6(Deltamethrin (Decamethrin))	-	0	-
3.6(Dichlorvos (DDVP) (content of dichloroacetaldehyde (D.C.A.))	-	0	-
3.6(Difenoconazole)	-	0	-
3.6(Dimethoate)	-	0	-
3.6(Dinotefuron)	-	0	-
3.6(Mancozeb)	-	0	-
3.6(metiram as CS2)	-	0	-
3.6(Edifenphos)	-	0	-
3.6(Emamectin Benzoate)	-	0	-
3.6(Ethion (Residues to be determined as ethion & its oxygen analogue and expressed as ethion))	-	0	-
3.6(Ethofenprox (Etofenprox))	-	0	-
3.6(Fenpropathrin)	-	0	-
3.6(Fenvalerate (fat soluble residue))	-	0	-
3.6(Fipronil)	-	0	-
3.6(Flubendiamide)	-	0	-
3.6(Flusilazole)	-	0	-
3.6(Glufosinate Ammonium)	-	0	-
3.6(Imidacloprid)	-	0	-
3.6(Indoxacarb)	-	0	-
3.6(Kresoxim Methyl)	-	0	-
3.6(Methomyl)	-	0	-
3.6(Methyl Chlorophenoxy Acetic Acid (MCPA))	-	0	-
3.6(Metolachlor)	-	0	-
3.6(Monocrotophos)	-	0	-
3.6(Oxydemeton-Methyl)	-	0	-
3.6(Paraquat dichloride (Determined as Paraquatcations))	-	0	-
3.6(Penconazole)	-	0	-
3.6(Phenthoate)	-	0	-
3.6(Phorate (sum of phorate,its oxygen analogue and their sulphoxides & sulphones, expressed as Phorate))	-	0	-
3.6(Pirimiphos-methyl)	-	0	-
3.6(Propiconazole)	-	0	-
3.6(Pyraclostrobin)	-	0	-
3.6(Tebuconazole)	-	0	-
3.6(Thiacloprid)	-	0	-
3.6(Thiophanate-Methyl)	-	0	-
3.6(Thiamethoxam)	-	0	-
3.6(Triacontanol)	-	0	-
3.6(Triadimefon)	-	0	-
3.6(Trichlorfon)	-	0	-
3.6("Antibiotic and Veterinary drug residues ")	-	0	-
3.6(Ampicillin)	-	0	-
3.6(Apramycin)	-	0	-
3.6(Albendazole)	-	0	-
3.6(Chlotetracycline/Oxytetracycline/Tetracycline)	-	0	-
3.6(Ceftiofur)	-	0	-
3.6(Cefphactril)	-	0	-
3.6(Doramectin)	-	0	-
3.6(Diminazene)	-	0	-
3.6(Flunixin)	-	0	-
3.6(Febantel/Fenbendazole/Oxyfendazole)	-	0	-
3.6(Ivermectin)	-	0	-
3.6(Lincomycin)	-	0	-
3.6(Monensin)	-	0	-
3.6(Meloxicam)	-	0	-
3.6(Neomycin)	-	0	-
3.6(Oxyclozanide)	-	0	-
3.6(Parbendazole)	-	0	-
3.6(Praziquantel)	-	0	-
3.6(Spectinomycin)	-	0	-
3.6(Sulfadiazine)	-	0	-
3.6(Sulfanilamide)	-	0	-
3.6(Sulfaquinoxaline)	-	0	-
3.6(Sulfadimidine)	-	0	-
3.6(Sulfa Chloropyrazine)	-	0	-
3.6(Thiabendazole)	-	0	-
3.6(Trimethoprim)	-	0	-
3.6(Tylosin)	-	0	-
3.6(Virginiamycin)	-	0	-
3.7, Table 3 (iii)(Aflatoxin M1 - ISO 14501 or ISO 14674 or any other international validated method)	-	0	-
3.7, Table 3 (iv)(Melamine - IS 16195)	-	0	-
Clause 3.5,Table 1 ,Sl No i)(Moisture)	-	0	-
Clause 3.5,Table 1 ,Sl No ii)(Total solids)	-	0	-
Clause 3.5,Table 1 ,Sl No iii)(Milk fat)	-	0	-
Clause 3.5,Table 1 ,Sl No iv)(Milk protein in milk solids not fat)	-	0	-
Clause 3.5,Table 1 ,Sl No v)(Insolubility index)	-	0	-
Clause 3.5,Table 1 ,Sl No vi)(Total ash(on dry basis))	-	0	-
Clause 3.5,Table 1 ,Sl No vii)(Titratable acidity (lactic acid),)	-	0	-
Clause 3.5,Table 1 ,Sl No viii)(Scorched particle)	-	0	-
3.5, Table 1 (i)(Moisture -IS 16072/IS 11623)	-	0	-
3.5, Table 1 (ii)(Total solids -IS 16072/IS 11623)	-	0	-
3.5, Table 1 (iii)(Milk Fat -IS 11721/IS 1224(P-2))	-	0	-
3.5, Table 1 (iv)(Milk protein in milk solids not fat-IS 11917)	-	0	-
3.5, Table 1 (v)(Insolubility index - IS 12759)	-	0	-
3.5, Table 1 (vi)(Total ash (on dry basis) - IS1165)	-	0	-
3.5, Table 1 (vii)(Titratable acidity (lactic acid), as ml of 0.1 N NaOH /10g solids not fat - IS 11765)	-	0	-
3.5, Table 1 (viii)(Scorched Particles - IS 13500)	-	0	-
3.2(Flavour and Taste)	-	0	-
3.3(extraneous matter)	-	0	-
Clause 3.5,Table 2 ,Sl No i)(Aerobic plate count)	-	0	-
Clause 3.5,Table 2 ,Sl No ii)(Coliform Count)	-	0	-
Clause 3.5,Table 2 ,Sl No iii)(Staphylococcus aureus(Coagulase positive))	-	0	-
Clause 3.5,Table 2 ,Sl No iv)(Yeast and mould count)	-	0	-
Clause 3.5,Table 2 ,Sl No v)(Salmonella sp)	-	0	-
Clause 3.5,Table 2 ,Sl No vi)(Listeria monocytogenes)	-	0	-
Clause 3.5,Table 2 ,Sl No vii)(Bacillus cereus)	-	0	-
Clause 3.5,Table 2 ,Sl No viii)(Sulphite reducing clostridia)	-	0	-
Clause 3.5,Table 2 ,Sl No ix)(E. coli)	-	0	-
"3.5 Table 2 (i) "(Aerobic plate count-IS 5402 (Part 1):2021)	-	0	-
"3.5 Table 2 (ii) "(Coliform count-IS 5401 (Part 1):2012)	-	0	-
"3.5 Table 2 (iii) "(Staphylococcuus aureus-IS 5887 (Part 8/Sec-1))	-	0	-
"3.5 Table 2 (iv) "(Yeast & mould count-IS 5403)	-	0	-
"3.5 Table 2 (v) "(Salmonella sp.-IS 5887 (Part 3/ Section -1))	-	0	-
"3.5 Table 2 (vi) "(Listeria monocytogenes-IS 14988 (Part 1))	-	0	-
"3.5 Table 2 (vii) "(Bacillus cereus-IS 5887 (Part 6))	-	0	-
"3.5 Table 2 (viii) "(Sulphite reducing clostridia-ISO 15213)	-	0	-
"3.5 Table 2 (ix) "(Escherichia coli-IS 5887 (Part 1))	-	0	-
CL 3.4, Table 2 (i)(Aerobic Plate Count)	-	0	-
CL 3.4, Table 2 (ii)(Coliform Count)	-	0	-
CL 3.4, Table 2 (iii)(Staphylococcus aureus (Coagulase positive))	-	0	-
CL 3.4, Table 2 (iv)(Yeast and Mold Count)	-	0	-
CL 3.4, Table 2 (v)(Salmonella sp)	-	0	-
CL 3.4, Table 2 (vi)(Listeria monocytogenes)	-	0	-
CL 3.4, Table 2 (vii)(Bacillus cereus)	-	0	-
CL 3.4, Table 2 (ix)(E. coli)	-	0	-
3.1(Discription)	-	0	-
4(Packing)	-	0	-
5(Marking)	-	0	-
3.2(Flavour & Taste - IS 1165)	-	0	-
3.3(Free from lumps ,extraneous matter,vetetable oil/fat,mineral oil, thickening agents, added flavour and sweetening agent - IS 1165)	-	0	-
CL 3.4, Table 2 (viii)(Sulphite reducing clostridia)	-	0	-

09 Mar, 2026

-
Included w.e.f.19.05.2025

1569

Ahmedabad Textile Industry's Research Association

IS 17630 (2021)

Medical Textiles Bedsheet and Pillow Cover Specification

17050 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(WORKMANSHIP AND FINISH)	-	2150	Blend Analysis: 950 Dimension of bedsheet & pillow cover: 800 Visual Observations X 2: 400
6(GENERAL REQUIREMENTS - Fabric Washing & Tumble Drying)	-	350	INR 350 is the price for each washing & drying cycle
6- Table 1- i)(GENERAL REQUIREMENTS - Colour fastness to rubbing a) Dry 4 or better b) Wet)	-	300	-
6- Table 1- ii)(GENERAL REQUIREMENTS - Colour fastness to perspiration (acidic and alkaline) a) Colour change b) Staining)	-	500	-
6- Table 1- iii)(GENERAL REQUIREMENTS - Colour fastness to washing a) Colour change b) Staining)	-	400	-
6- Table 1- iv)(GENERAL REQUIREMENTS - Colour fastness to light Color change)	-	1650	-
6- Table 1- v)(GENERAL REQUIREMENTS - Dimensional stability to washing, percentage Length and width)	-	250	-
6- Table 1- vi)(GENERAL REQUIREMENTS - Pilling resistance)	-	700	-
6- Table 1- vii)(GENERAL REQUIREMENTS - Scouring loss, percent, Max (for cotton))	-	650	-
7.1- Table 2- i)(PERFORMANCE REQUIREMENTS - Tensile strength (dry and wet) (N))	-	900	-
7.1- Table 2- ii)(PERFORMANCE REQUIREMENTS - Bursting strength (dry and wet) (kPa))	-	800	-
7.1- Table 2- iii)(PERFORMANCE REQUIREMENTS - Seam strength (dry and wet) (N))	-	800	-
7.1- Table 2- iv)(PERFORMANCE REQUIREMENTS - pH)	-	350	-
7.1- Table 2- v)(PERFORMANCE REQUIREMENTS - Water soluble substance, percent)	-	450	-
7.1- Table 2- ix)(PERFORMANCE REQUIREMENTS - Moisture vapour transmission rate (Max))	-	6800	-

-
Included w.e.f 04.03.2025 Exclusion: 7.1- Table 2- vi) (PERFORMANCE REQUIREMENTS - Cleanliness–microbial (CFU/100 cm2)), 7.1- Table 2- vii) (PERFORMANCE REQUIREMENTS - Particle release [log10 (lint count)]), 7.1- Table 2- viii) (PERFORMANCE REQUIREMENTS - Biocompatibility Evaluation a) Cytotoxicity b) Irritation and skin sensitization)

1570

Institute for Auto Parts and Hand Tools Technology

IS 18471 : Part 2 (2023)

Fasteners ï¿½ Cross Recessed Drilling Screws with Tapping Screw Thread Part 2 Countersunk Head

All grade/ Type/ Size as per IS 18471 (Part-II): 2023

17650 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 3.0(Dimenssions.)	-	810	-
Clause. 3.0(Thread size.)	-	0	-
Clause. 3.0(Length)	-	0	-
Clause. 4.0(Material)	-	1200	-
Clause. 4.0(Thread)	-	0	-
Clause. 4.0(Cross recesses)	-	0	-
Clause. 4.0(Mechnical and functional properties.)	-	15640	-
Clause. 4.0(Finish)	-	0	0
Clause. 4.0(Acceptability)	-	0	-
Clause.5.0(Designation)	-	0	-
Clause.5.0(Marking)	-	0	-

17 Feb, 2028

-
-

1571

Gravitas Laboratories Private Limited

IS 1381 : Part 1 (2003)

Laboratory glassware - Narrow - Necked boiling flasks (Second Revision)

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3, 4(Type of Flask)	-	1000	-
3.1, 4.1(Series of Nominal Capacity)	-	1000	-
3.2, 4.2(Nominal Capacity )	-	2000	-
3.4, 3.4.1 & 4.4, 4.4.1(Construction- a) Stability )	-	1000	-
3.4, 3.4.2 & 4.4, 4.4.2(Construction- b) Neck )	-	1000	-
3.5, 4.5(Dimensions (in mm) (Table 1&2))	-	2000	-
3.5.2(Neck Length)	-	1000	-
3.5.3, 4.5.2(Dimensions of base )	-	1000	-
3.5.4, 4.5.3(Wall thickness)	-	1000	-
5(Marking )	-	0	-
3.3, 4.3(Material )	-	0	-
3, 4(Type of Flask)	-	1000	-
3.1, 4.1(Series of Nominal Capacity)	-	1000	-
3.2, 4.2(Nominal Capacity )	-	2000	-
3.4, 3.4.1 & 4.4, 4.4.1(Construction- a) Stability )	-	1000	-
3.4, 3.4.2 & 4.4, 4.4.2(Construction- b) Neck )	-	1000	-
3.5, 4.5(Dimensions (in mm) (Table 1&2))	-	2000	-
3.5.2(Neck Length)	-	1000	-
3.5.3, 4.5.2(Dimensions of base )	-	1000	-
3.5.4, 4.5.3(Wall thickness)	-	1000	-
3, 4(Type of Flask)	-	1000	-
3.1, 4.1(Series of Nominal Capacity)	-	1000	-
3.2, 4.2(Nominal Capacity )	-	2000	-
3.4, 3.4.1 & 4.4, 4.4.1(Construction- a) Stability )	-	1000	-
3.4, 3.4.2 & 4.4, 4.4.2(Construction- b) Neck )	-	1000	-
3.5, 4.5(Dimensions (in mm) (Table 1&2))	-	2000	-
3.5.2(Neck Length)	-	1000	-
3.5.3, 4.5.2(Dimensions of base )	-	1000	-
3.5.4, 4.5.3(Wall thickness)	-	1000	-
3, 4(Type of Flask)	-	0	-
3.1, 4.1(Series of Nominal Capacity)	-	0	-
3.2, 4.2(Nominal Capacity )	-	0	-
3.4, 3.4.1 & 4.4, 4.4.1(Construction- a) Stability )	-	0	-
3.4, 3.4.2 & 4.4, 4.4.2(Construction- b) Neck )	-	0	-
3.5, 4.5(Dimensions (in mm) (Table 1&2))	-	0	-
3.5.2(Neck Length)	-	0	-
3.5.3, 4.5.2(Dimensions of base )	-	0	-
3.5.4, 4.5.3(Wall thickness)	-	0	-

19 Nov, 2027

-
Included w.e.f 23.05.2025 Excluding Material Cl 3.3 & 4.3 Restricted to nominal capacity of 1000 milliletres

1572

Atmy Analytical Labs Pvt. Ltd.

IS 17682 (2021)

ALUMINIUM COMPOSITE PANEL SPECIFICATION

42000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 5.1(Polymer Granules)	-	5000	Rs. 42000/- for all test excluding Table 3 & 4 Clause 5.1 Melt flow Index - Rs.2500/- Ash content - Rs.2500/-
Clause 5.2(Aluminium Alloy Sheets)	-	1000	Clause 5.2 - Rs.500/- Clause 5.3 - Rs.500/-
Clause 5.4(Surface Coating)	-	500	-
Clause 6(DIMENSIONS AND TOLERANCE)	-	3000	Clause 6.1 - Length - Rs.750/- Width - Rs.750/- Clause 6.2 Thickness - Rs.1500/- Table-1 Edge Straightness - Rs.1500/- Table-1 Squarenss - Rs.1500/-
"Clause 7.1 Table 2(i)"(Density of core, g/cm)	-	2000	-
"Clause 7.1 Table 2(ii)"(Tensile strength,)	-	1500	-
"Clause 7.1 Table 2(iii)"(Yield strength)	-	1500	-
"Clause 7.1 Table 2(iv)"(Elongation)	-	1500	-
"Clause 7.1 Table 2(v)"(Peel strength, N/10 mm width, Min)	-	2500	-
"Clause 7.1 Table 3(i)"(Coating type)	-	2000	Coating type and Coating Thickness - Rs.2000/-
"Clause 7.1 Table 3(ii)"(Coating thickness)	-	0	-
"Clause 7.1 Table 3(iii)"(Adhesion (cross hatch))	-	7000	Dry - Rs.2000/- Wet - Rs.2000/- Boiling water - Rs.3000/-
"Clause 7.1 Table 3(iv)"(Pencil hardness, Min)	-	2000	-
"Clause 7.1 Table 3(v)"(Gloss)	-	2000	-
"Clause 7.1 Table 3(vi)"(Weatherometer test (for 4 000 h))	-	0	Amendment no.1,Sept.2024 Sl. no. (V) a).1 Humidity Test - Rs.200,000/- a).2 Corrosion Test-Rs.200,000/- b) Weathering test PVDF/FEVE(2 Coat) - Rs.400,000/- PVDF/FEVE(3 Coat)- Rs.400,000/- SDP(2/3 Coat)-Rs.300,000/- Polyester(1 Coat)-Rs.100,000/-
"Clause 7.1 Table 3(vii)"(Chemical resistance)	-	7500	Amendment no.1,Sept.2024 a) 1500/- b) 1500/- c) 1500/- d) 1500/- e) 1500/-
"Clause 7.1 Table 4(i)"(Limiting oxygen index (LOI), Min)	-	15000	-
"Clause 7.1 Table 4(ii)"(Smoke density rating, percent, Max)	-	15000	-
"Clause 7.1 Table 4(iii)"(Ignitability)	-	15000	-
"Clause 7.1 Table 4(iv)"(Flame spread)	-	115000	-
"Clause 7.1 Table 4(v)"(Non-combustibility (see Note))	-	35000	-
"Clause 7.1 Table 4(vi)"(Oxygen bomb calorimeter)	-	15000	-
"Clause 7.2 Table 5(i)"(Sound transmission class (STC), dB, Min)	-	0	-
"Clause 7.2 Table 5(ii)"(Sound absorption coefficient, percent, Min)	-	0	-
"Clause 7.2 Table 5(iii)"(Coefficient of linear thermal expansion, °C–1 , Max)	-	0	-
"Clause 7.2 Table 5(iv)"(Thermal Conductivity (W/m2 K), Max)	-	0	-
Clause 5.1(Polymer Granules)	-	0	-
Clause 5.2(Aluminium Alloy Sheets)	-	0	-
Clause 5.4(Surface Coating)	-	0	-
Clause 6(DIMENSIONS AND TOLERANCE)	-	0	-
"Clause 7.1 Table 2(i)"(Density of core, g/cm)	-	0	-
"Clause 7.1 Table 2(ii)"(Tensile strength,)	-	0	-
"Clause 7.1 Table 2(iii)"(Yield strength)	-	0	-
"Clause 7.1 Table 2(iv)"(Elongation)	-	0	-
"Clause 7.1 Table 2(v)"(Peel strength, N/10 mm width, Min)	-	0	-
"Clause 7.1 Table 3(i)"(Coating type)	-	0	-
"Clause 7.1 Table 3(ii)"(Coating thickness)	-	0	-
"Clause 7.1 Table 3(iii)"(Adhesion (cross hatch))	-	0	-
"Clause 7.1 Table 3(iv)"(Pencil hardness, Min)	-	0	-
"Clause 7.1 Table 3(v)"(Gloss)	-	0	-
"Clause 7.1 Table 3(vi)"(Weatherometer test (for 4 000 h))	-	0	-
"Clause 7.1 Table 3(vii)"(Chemical resistance)	-	0	-
"Clause 7.1 Table 4(i)"(Limiting oxygen index (LOI), Min)	-	0	-
"Clause 7.1 Table 4(ii)"(Smoke density rating, percent, Max)	-	0	-
"Clause 7.1 Table 4(iii)"(Ignitability)	-	0	-
"Clause 7.1 Table 4(iv)"(Flame spread)	-	0	-
"Clause 7.1 Table 4(v)"(Non-combustibility (see Note))	-	0	-
"Clause 7.1 Table 4(vi)"(Oxygen bomb calorimeter)	-	0	-
"Clause 7.2 Table 5(i)"(Sound transmission class (STC), dB, Min)	-	0	-
"Clause 7.2 Table 5(ii)"(Sound absorption coefficient, percent, Min)	-	0	-
"Clause 7.2 Table 5(iii)"(Coefficient of linear thermal expansion, °C–1 , Max)	-	0	-
"Clause 7.2 Table 5(iv)"(Thermal Conductivity (W/m2 K), Max)	-	0	-
Clause 5.1(Polymer Granules)	-	0	-
Clause 5.2(Aluminium Alloy Sheets)	-	0	-
Clause 5.4(Surface Coating)	-	0	-
Clause 6.1(Normal dimensions)	-	0	-
"Clause 7.1 Table 2(i)"(Density of core, g/cm)	-	0	-
"Clause 7.1 Table 2(ii)"(Tensile strength,)	-	0	-
"Clause 7.1 Table 2(iii)"(Yield strength)	-	0	-
"Clause 7.1 Table 2(iv)"(Elongation)	-	0	-
"Clause 7.1 Table 2(v)"(Peel strength, N/10 mm width, Min)	-	0	-
"Clause 7.1 Table 3(i)"(Coating type)	-	0	-
"Clause 7.1 Table 3(ii)"(Coating thickness)	-	0	-
"Clause 7.1 Table 3(iii)"(Adhesion (cross hatch))	-	0	-
"Clause 7.1 Table 3(iv)"(Pencil hardness, Min)	-	0	-
"Clause 7.1 Table 3(v)"(Gloss)	-	0	-
"Clause 7.1 Table 3(vi)"(Weatherometer test (for 4 000 h))	-	0	-
"Clause 7.1 Table 3(vii)"(Chemical resistance)	-	0	-
"Clause 7.1 Table 4(i)"(Limiting oxygen index (LOI), Min)	-	0	-
"Clause 7.1 Table 4(ii)"(Smoke density rating, percent, Max)	-	0	-
"Clause 7.1 Table 4(iii)"(Ignitability)	-	0	-
"Clause 7.1 Table 4(iv)"(Flame spread)	-	0	-
"Clause 7.1 Table 4(v)"(Non-combustibility (see Note))	-	0	-
"Clause 7.1 Table 4(vi)"(Oxygen bomb calorimeter)	-	0	-
"Clause 7.2 Table 5(i)"(Sound transmission class (STC), dB, Min)	-	0	-
"Clause 7.2 Table 5(ii)"(Sound absorption coefficient, percent, Min)	-	0	-
"Clause 7.2 Table 5(iii)"(Coefficient of linear thermal expansion, °C–1 , Max)	-	0	-
"Clause 7.2 Table 5(iv)"(Thermal Conductivity (W/m2 K), Max)	-	0	-

25 Feb, 2027

-
-

1573

UL INDIA PRIVATE LIMITED

IS/IEC 60947 : Part 5 : Sec 1 (2016)

Low-Voltage Switchgear And Control Gear : Part 5-1 Control Circuit Devices And Switching Elements Electromechanical Control Circuit Devices

Control Circuit Devices And Switching Elements Electromechanical Control Circuit Devices

2061000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.1(Marking : General ")	-	500	375000(For sequence testings of 1 sample); 1226000(For Annex & Other testings of 1 sample); 460000 (For EMC tests per sample) Total cost 2061000 (Seq. tests + Annex tests + EMC tests)
5.2.2(Terminal identification and marking)	-	500	375000(For sequence testings of 1 sample); 1226000(For Annex & Other testings of 1 sample); 460000 (For EMC tests per sample) Total cost 2061000 (Seq. tests + Annex tests + EMC tests)
5.2.3(Functional markings)	-	500	375000(For sequence testings of 1 sample); 1226000(For Annex & Other testings of 1 sample); 460000 (For EMC tests per sample) Total cost 2061000 (Seq. tests + Annex tests + EMC tests)
5.2.4(Emergency stop)	-	500	375000(For sequence testings of 1 sample); 1226000(For Annex & Other testings of 1 sample); 460000 (For EMC tests per sample) Total cost 2061000 (Seq. tests + Annex tests + EMC tests)
5.2.5(Operating diagram)	-	500	375000(For sequence testings of 1 sample); 1226000(For Annex & Other testings of 1 sample); 460000 (For EMC tests per sample) Total cost 2061000 (Seq. tests + Annex tests + EMC tests)
5.2.5.1(Position indication)	-	500	375000(For sequence testings of 1 sample); 1226000(For Annex & Other testings of 1 sample); 460000 (For EMC tests per sample) Total cost 2061000 (Seq. tests + Annex tests + EMC tests)
5.2.5.2(Terminal markings for operating diagrams)	-	500	375000(For sequence testings of 1 sample); 1226000(For Annex & Other testings of 1 sample); 460000 (For EMC tests per sample) Total cost 2061000 (Seq. tests + Annex tests + EMC tests)
5.2.6(Time delay markings)	-	500	375000(For sequence testings of 1 sample); 1226000(For Annex & Other testings of 1 sample); 460000 (For EMC tests per sample) Total cost 2061000 (Seq. tests + Annex tests + EMC tests)
5.3(Instructions for installation, operation and maintenance)	-	500	375000(For sequence testings of 1 sample); 1226000(For Annex & Other testings of 1 sample); 460000 (For EMC tests per sample) Total cost 2061000 (Seq. tests + Annex tests + EMC tests)
7.1.2.2(Glow-wire testing)	-	10000	375000(For sequence testings of 1 sample); 1226000(For Annex & Other testings of 1 sample); 460000 (For EMC tests per sample) Total cost 2061000 (Seq. tests + Annex tests + EMC tests)
7.1.3(Current-carrying parts and their connections)	-	35000	375000(For sequence testings of 1 sample); 1226000(For Annex & Other testings of 1 sample); 460000 (For EMC tests per sample) Total cost 2061000 (Seq. tests + Annex tests + EMC tests)
7.1.4(Clearances and creepage distances)	-	25000	375000(For sequence testings of 1 sample); 1226000(For Annex & Other testings of 1 sample); 460000 (For EMC tests per sample) Total cost 2061000 (Seq. tests + Annex tests + EMC tests)
7.2.4.1(Making and breaking capacities)	-	80000	375000(For sequence testings of 1 sample); 1226000(For Annex & Other testings of 1 sample); 460000 (For EMC tests per sample) Total cost 2061000 (Seq. tests + Annex tests + EMC tests)
7.2.4.3(Durability)	-	240000	375000(For sequence testings of 1 sample); 1226000(For Annex & Other testings of 1 sample); 460000 (For EMC tests per sample) Total cost 2061000 (Seq. tests + Annex tests + EMC tests)
7.3.2.4(Electrostatic discharges)	-	30000	375000(For sequence testings of 1 sample); 1226000(For Annex & Other testings of 1 sample); 460000 (For EMC tests per sample) Total cost 2061000 (Seq. tests + Annex tests + EMC tests)
7.3.2.5(Radiated radio-frequency electromagnetic fields)	-	120000	375000(For sequence testings of 1 sample); 1226000(For Annex & Other testings of 1 sample); 460000 (For EMC tests per sample) Total cost 2061000 (Seq. tests + Annex tests + EMC tests)
7.3.2.6(Electrical fast transients/bursts)	-	30000	375000(For sequence testings of 1 sample); 1226000(For Annex & Other testings of 1 sample); 460000 (For EMC tests per sample) Total cost 2061000 (Seq. tests + Annex tests + EMC tests)
7.3.2.7(Surges)	-	50000	375000(For sequence testings of 1 sample); 1226000(For Annex & Other testings of 1 sample); 460000 (For EMC tests per sample) Total cost 2061000 (Seq. tests + Annex tests + EMC tests)
7.3.2.8(Conducted disturbances induced by radio-frequency fields)	-	30000	375000(For sequence testings of 1 sample); 1226000(For Annex & Other testings of 1 sample); 460000 (For EMC tests per sample) Total cost 2061000 (Seq. tests + Annex tests + EMC tests)
7.3.2.9(Power-frequency magnetic fields)	-	30000	375000(For sequence testings of 1 sample); 1226000(For Annex & Other testings of 1 sample); 460000 (For EMC tests per sample) Total cost 2061000 (Seq. tests + Annex tests + EMC tests)
7.3.2.10(Voltage dips and interruptions)	-	30000	-
7.3.3(Emission)	-	30000	-
7.2.3(Dielectric properties)	-	15000	-
8.1.5(Special tests)	-	350000	-
8.2.1.1(Test of resistance to abnormal heat and fire)	-	25000	-
8.2.1.1.1(Glow-wire test)	-	15000	-
8.2.1.1.2(Flammability, hot wire ignition and arc ignition tests (on materials))	-	15000	-
8.2.3(Enclosures for equipment)	-	60000	-
8.2.4(Mechanical and electrical properties of terminals)	-	25000	-
8.2.4.2(Tests of mechanical strength of terminals)	-	25000	-
8.2.4.3(Testing for damage to and accidental loosening of conductors (flexion test))	-	25000	-
8.2.4.4(Pull-out test)	-	10000	-
8.2.4.5(Test for insertability of unprepared round copper conductors having the maximum cross-section)	-	5000	-
8.2.5(Verification of actuating force (or moment))	-	5000	-
8.2.6(Verification of limitation of rotation (of a rotary switch))	-	5000	-
8.2.7(Conduit pull-out test, torque test, and bending test with metallic conduits)	-	20000	-
8.3.3.3(Temperature rise)	-	25000	-
8.3.3.4(Dielectric properties)	-	15000	-
8.3.3.2(Operating limits of contactor relays)	-	15000	-
8.3.3.5(Making and breaking capacities)	-	80000	-
8.3.3.5.2(Test circuits and connections)	-	500	-
8.3.4.3(Test circuit and test quantities)	-	0	-
8.3.4.2(Performance under conditional short-circuit current : Test procedure)	-	50000	-
8.3.4.1(General conditions for short-circuit tests)	-	0	-
8.3.4.4 b)(Condition of the switching element after the test)	-	10000	-
8.3.4.4 a)(Condition of the switching element after the test)	-	10000	-
8.4.2.4(Surges)	-	50000	-
8.3.1(Degree of protection of enclosed control circuit devices)	-	60000	-
C.3(Electrical durability)	-	144000	-
C.2(Mechanical durability)	-	96000	-
C.1.2(Observation)	-	500	-
F 8.1.2.6("Dielectric test after stresses")	-	15000	-
F 8.1.2.4(Impact test)	-	5000	-
F.8.1.2.3("Rapid change of temperature test")	-	80000	-
F.8.1.2.5(Damp heat, cyclic)	-	80000	-
F.8.1.2.4(Impact test)	-	5000	-
F.8.1.2.1(Dielectric tests in new conditions)	-	15000	-
G.8.2.5(Bend test)	-	10000	-
G.8.2.4(Push test)	-	10000	-
G.8.2.3(Torque test)	-	10000	-
G.8.2.2(Pull-out test)	-	10000	-
H.8.7("Verification of electromagnetic compatibility")	-	420000	-
H.8.6("Performance under short circuit current conditions")	-	50000	-
H.8.5("Making and breaking capacities")	-	80000	-
H.8.4(OFF-state current)	-	5000	-
H.8.2(Voltage drop test)	-	5000	-
J.8.5("Degree of protection for indicating towers")	-	60000	-
J.8.4.3(Indirect support mounting)	-	500	-
J.8.4.2.3(Vibration)	-	60000	-
J.8.4.2.2(Shock)	-	60000	-
J.8.3.4("Short Circuit test (on built-in transformers, if any)")	-	50000	-
J.8.3.3.3(Temp-rise tests)	-	25000	-
J.8.3.3.4.3("Dielectric test (indicator lights with built-in transformers)")	-	15000	-
J.8.3.3.4(Dielectric test)	-	15000	-
J.7.1.12(Indicator lights with built-in transformers)	-	15000	-
J.7("Constructional requirements")	-	500	-
K 8.3.4("Performance under conditional shortcircuit current")	-	50000	-
K 8.3.7(Verification of robustness of the actuating system)	-	5000	-
K 8.3.5(Verification of mechanical operation of position switches at limits of temperature)	-	5000	-
K.8.3.6(Verification of direct opening action)	-	50000	-
L.8.4(Special test for mechanically linked contact elements)	-	50000	-
N.3(Method based on durability test results)	-	50000	-
L.8.4(Special test for mechanically linked contact elements)	-	50000	-
K.8.3.6(Verification of direct opening action)	-	50000	-
5.2.1(" Marking : General ")	-	0	-
K 8.3.5(Verification of mechanical operation of position switches at limits of temperature)	-	0	-
K 8.3.7(Verification of robustness of the actuating system)	-	0	-
K 8.3.4("Performance under conditional shortcircuit current")	-	0	-
5.2.2(Terminal identification and marking)	-	0	-
J.7("Constructional requirements")	-	0	-
5.2.3(Functional markings)	-	0	-
J.7.1.12(Indicator lights with built-in transformers)	-	0	-
J.8.3.3.4(Dielectric test)	-	0	-
5.2.4(Emergency stop)	-	0	-
J.8.3.3.4.3("Dielectric test (indicator lights with built-in transformers)")	-	0	-
J.8.3.3.3(Temp-rise tests)	-	0	-
J.8.3.4("Short Circuit test (on built-in transformers, if any)")	-	0	-
5.2.5(Operating diagram)	-	0	-
J.8.4.2.2(Shock)	-	0	-
5.2.5.1(Position indication)	-	0	-
J.8.4.2.3(Vibration)	-	0	-
J.8.4.3(Indirect support mounting)	-	0	-
5.2.5.2(Terminal markings for operating diagrams)	-	0	-
J.8.5("Degree of protection for indicating towers")	-	0	-
5.2.6(Time delay markings)	-	0	-
H.8.2(Voltage drop test)	-	0	-
5.3(Instructions for installation, operation and maintenance)	-	0	-
H.8.4(OFF-state current)	-	0	-
H.8.5("Making and breaking capacities")	-	0	-
7.1.2.2(Glow-wire testing)	-	0	-
H.8.6("Performance under short circuit current conditions")	-	0	-
7.1.3(Current-carrying parts and their connections)	-	0	-
H.8.7("Verification of electromagnetic compatibility")	-	0	-
G.8.2.2(Pull-out test)	-	0	-
7.1.4 of IEC 60947-1:2007 (Sequence 6)(Measurement of Clearances and creepage distances)	-	0	-
G.8.2.3(Torque test)	-	0	-
7.2.4.1(Making and breaking capacities)	-	0	-
7.2.4.1(Making and breaking capacities)	-	0	-
G.8.2.4(Push test)	-	0	-
G.8.2.5(Bend test)	-	0	-
F.8.1.2.1(Dielectric tests in new conditions)	-	0	-
7.2.4.3(Durability)	-	0	-
F.8.1.2.4(Impact test)	-	0	-
7.3.2.4(Electrostatic discharges)	-	0	-
F.8.1.2.5(Damp heat, cyclic)	-	0	-
F.8.1.2.3("Rapid change of temperature test")	-	0	-
7.3.2.6(Electrical fast transients/bursts)	-	0	-
F 8.1.2.4(Impact test)	-	0	-
F 8.1.2.6("Dielectric test after stresses")	-	0	-
C.1.2(Observation)	-	0	-
7.3.2.7(Surges)	-	0	-
C.2(Mechanical durability)	-	0	-
7.3.2.8(Conducted disturbances induced by radio-frequency fields)	-	0	-
C.3(Electrical durability)	-	0	-
7.3.2.9(Power-frequency magnetic fields)	-	0	-
Annex C of IEC 60947-1:2007 (Sequence 5)(Degree of protection of enclosed control circuit devices)	-	0	-
8.4.2.4(Surges)	-	0	-
7.3.2.10(Voltage dips and interruptions)	-	0	-
8.3.4.4 a)(Condition of the switching element after the test)	-	0	-
8.3.4.4 b)(Condition of the switching element after the test)	-	0	-
8.3.4.1(General conditions for short-circuit tests)	-	0	-
8.3.4.2(Performance under conditional short-circuit current : Test procedure)	-	0	-
8.3.4.3(Test circuit and test quantities)	-	0	-
7.3.3(Emission)	-	0	-
8.3.3.5.2(Test circuits and connections)	-	0	-
8.3.3.5(Making and breaking capacities)	-	0	-
8.3.3.2(Operating limits of contactor relays)	-	0	-
7.2.3(Dielectric properties)	-	0	-
8.3.3.4(Dielectric properties)	-	0	-
8.3.3.3(Temperature rise)	-	0	-
8.1.5(Special tests)	-	0	-
8.2.7(Conduit pull-out test, torque test and bending test with metallic conduits)	-	0	-
8.2.6 (Sequence 6)(Verification of limitation of rotation (of a rotary switch))	-	0	-
8.2.1.1(Test of resistance to abnormal heat and fire)	-	0	-
8.2.5 (Sequence 5)(Verification of actuating force (or moment))	-	0	-
8.2.4.5(Test for insertability of unprepared round copper conductors having the maximum cross-section)	-	0	-
8.2.1.1.1(Glow-wire test)	-	0	-
8.2.4.4(Pull-out test)	-	0	-
8.2.4.3(Testing for damage to and accidental loosening of conductors (flexion test))	-	0	-
8.2.1.1.2(Flammability, hot wire ignition and arc ignition tests (on materials))	-	0	-
8.2.4.2(Tests of mechanical strength of terminals)	-	0	-
8.2.4(Mechanical and electrical properties of terminals)	-	0	-
8.2.3(Enclosures for equipment)	-	0	-
8.3.3.5.6 b(Dielectric verification)	-	0	-
8.3.4(Performance under Conditional Short-Circuit Current)	-	0	-
8.3.3.5.3(Making and breaking capacities of switching elements under abnormal conditions)	-	0	-
8.3.3.5.4(Making and breaking capacities of switching elements under abnormal conditions)	-	0	-
7.3.2.11(Harmonics in the supply)	-	0	-
7.3.2.11(Harmonics in the supply)	-	0	-

12 May, 2027

-
Included w.e.f.18.02.2025 Exclusion Cl 7.3.2.11 (Harmonics in the supply) Cl 8.2.1.1.2 (Flammability, hot wire ignition and arc ignition tests (on materials)) Cl 8.2.3 (Enclosures for equipment) Cl 8.3.1 (Degree of protection of enclosed control circuit devices) Cl H.8.7 ("Verification of electromagnetic compatibility") Cl J.8.5 ("Degree of protection for indicating towers") Cl J.8.5 ("Degree of protection for indicating towers") Cl 8.2.1.1.2 (Flammability, hot wire ignition and arc ignition tests (on materials)) Cl 8.2.3 (Enclosures for equipment) Cl 7.3.2.11 (Harmonics in the supply)

1574

Alpha Test House Services LLP

IS 712 (1984)

Specification for building limes (Third Revision)

All Class

18500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4 ,Table 1(Chem reqd)	-	18500	excluding GST
cl 4, Table 2(Physical reqd)	-	18500	excluding GST
Cl. 4.1 - Table 1 - i(Calcium and Magnesium Oxides, on ignited basis - IS 6932 (part 1) : 1973)	-	18500	excluding GST
Cl. 4.1 - Table 1 - ii(Magnesium Oxides, on ignited basis - IS 6932 (part 1) : 1973)	-	18500	excluding GST
Cl. 4.1 - Table 1 - iii(Silica, Alumina and Ferric oxide, on ignited basis - IS 6932 (part 1) : 1973)	-	18500	excluding GST
Cl. 4.1 - Table 1 - iv(Unhydrated Magnesium oxide, on ignited basis - IS 6932 (part 5) : 1973)	-	18500	excluding GST
Cl. 4.1 - Table 1 - v(Insoluble Residue in dilute acid and alkali, on ignited basis - IS 6932 (part 1) : 1973)	-	18500	excluding GST
Cl. 4.1 - Table 1 - vi(Carbondioxide on oven dried basis - IS 6932 (part 2) : 1973)	-	18500	excluding GST
Cl. 4.1 - Table 1 - vii(Free moisture content - IS 1514 : 1959)	-	18500	excluding GST
Cl. 4.1 - Table 1 - viii(Available lime as CaO (dry basis) - IS 1514 : 1959)	-	18500	excluding GST
Clauses 5.1 Table No. 2, SI No. (ix) (Popping Pitting)	-	18500	excluding GST
Clauses 5.1 Table No. 2, SI No. (viii) (Soundness- Le chatelier Expansion)	-	18500	excluding GST
Clauses 5.1 Table No. 2, SI No. (vii) (Volume yield)	-	18500	excluding GST
Clauses 5.1 Table No. 2, SI No. (vi) (Workability Bumps)	-	18500	excluding GST
Clauses 5.1 Table No. 2, SI No. (v) (Transverse strength at 28 days)	-	18500	excluding GST
Clauses 5.1 Table No. 2, SI No. (iv) b) (Compressive strength at 28 days)	-	18500	excluding GST
Clauses 5.1 Table No. 2, SI No. (iv) a) (Compressive strength at 14 days)	-	18500	excluding GST
Clauses 5.1 Table No. 2, SI No. (iii) b) (Final Setting time)	-	18500	excluding GST
Clauses 5.1 Table No. 2, SI No. (iii) a) (Initial Setting time)	-	18500	excluding GST
Clauses 5.1 Table No. 2, SI No. (ii) b) (Residue on slaking (Residue on 300 micron IS sieve))	-	18500	excluding GST
Clauses 5.1 Table No. 2, SI No. (ii) a) (Residue on slaking (Residue on 850 micron IS sieve))	-	18500	excluding GST
Clauses 5.1 Table No. 2, SI No. (i) c) (Fineness- (Residue on 212 micron IS Sieve))	-	18500	excluding GST
Clauses 5.1 Table No. 2, SI No. (i) b) (Fineness- (Residue on 300 micron IS Sieve))	-	18500	excluding GST
Clauses 5.1 Table No. 2, SI No. (i) a) (Fineness- (Residue on 2.36 mm IS Sieve))	-	18500	excluding GST

31 Dec, 2026

-
Included w.e.f 12.03.2025

1575

SWASTIK ELECTRONICS TESTING CENTRE (OPC) PVT. LTD.

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General requirement)	-	0	-
5(General conditions for the tests)	-	0	-
6(Classification)	-	500	-
7(Marking and instructions)	-	500	-
8.1.1(Protection against live parts in all positions)	-	1000	-
8.1.2(Protection against live parts in openings)	-	500	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	0	-
8.1.4(Protection against live parts against protective impedance)	-	0	-
8.1.5(Live parts of built-in appliances)	-	0	-
9(Starting of motor operation test requirements and tests)	-	0	-
10.1(Power input)	-	500	-
10.2(Current input)	-	500	-
11.1(General)	-	500	-
11.2(General)	-	500	-
11.3(Heating)	-	0	-
11.4(Heating appliances)	-	0	-
11.5(Motor-operated appliances)	-	0	-
11.6(Combined appliances)	-	0	-
11.7(Duration corresponding)	-	0	-
11.8(Temperature rise)	-	0	-
12(Charging of metal-ion batteries)	-	0	-
13(Leakage current and electric strength at operating temperature)	-	500	-
13.2(Leakage current at operating temperature)	-	500	-
13.3(Electric Strength at operating temperature)	-	500	-
14(Transient Over Voltages)	-	1000	-
15.0(Moisture resistance)	-	1000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	500	-
15.2(Spillage Test)	-	500	-
15.3(Humidity Test)	-	1000	-
16.0(General)	-	0	-
16.1(General)	-	0	-
16.2(Leakage Current (after Clause 15))	-	500	-
16.3(Electric Strength (after clause 15 and 16.2))	-	1000	-
16(Leakage current and electric strength)	-	1000	-
17(Over Load Protection of Transformers and associated circuits)	-	1000	-
18(Endurance)	-	0	-
18(Endurance)	-	0	-
19(Abnormal Operation)	-	1000	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
19.17(Abnormal operation)	-	500	-
20(Stability and mechanical hazards)	-	500	-
20.1(Stability and mechanical hazards)	-	500	-
21(Mechanical Strength)	-	500	-
21.2(Mechanical strength)	-	500	-
21.3(Mechanical strength)	-	500	-
22(Construction)	-	500	-
22.5(Construction)	-	500	-
22.6(Construction)	-	500	-
22.11(Construction)	-	500	-
22.16(Construction)	-	500	-
22.32(Construction)	-	500	-
22.42(Construction)	-	500	-
23(Internal wiring)	-	500	-
23.3(Internal wiring)	-	500	-
24(Components)	-	500	-
25(Supply connection and external flexible cords)	-	1000	-
25(Supply connection and external flexible cords)	-	500	-
25.7(Supply connection and external flexible cords)	-	0	-
25.14(Supply connection and external flexible cords)	-	500	-
25.15(Supply connection and external flexible cords)	-	0	-
26(Terminals for external conductors)	-	500	-
26.5(Terminals for external conductors)	-	500	-
27(Provision for earthing)	-	500	-
27.5(Provision for earthing)	-	500	-
28(Screw test and connections)	-	1000	-
28.1(Screws and connections)	-	500	-
29(clearance, creepage distances and solid insulation)	-	1000	-
30.1(Ball pressure test)	-	500	-
30.2(Glow Wire Test)	-	500	-
30.2(Needle Flame Test)	-	500	-
31(Resistance to Rusting)	-	500	-
32(Radiation Toxicity and Similar Hazards)	-	500	-
A.2(Earth continuity test)	-	500	-
B.22.1(Construction)	-	500	-
B.22.3(Construction)	-	500	-
B.22.4(Construction)	-	500	-
B.22.5(Construction)	-	500	-
Annex C(Ageing test on motors)	-	500	-
Annex D(Thermal motor protectors)	-	500	-
17(Overload protection of transformers and associated circuits)	-	0	-
15.2(Moisture resistance)	-	0	-
4(General requirement)	-	0	-
5(General conditions for the tests)	-	0	-
6(Classification)	-	0	-
7(Marking and instructions)	-	0	-
8.1.1(Protection against live parts in all positions)	-	0	-
8.1.2(Protection against live parts in openings)	-	0	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	0	-
8.1.4(Protection against live parts against protective impedance)	-	0	-
8.1.5(Live parts of built-in appliances)	-	0	-
9(Starting of motor operation test requirements and tests)	-	0	-
10.1(Power input)	-	0	-
10.2(Current input)	-	0	-
11.1(General)	-	0	-
11.2(General)	-	0	-
11.3(Heating)	-	0	-
11.4(Heating appliances)	-	0	-
11.5(Motor-operated appliances)	-	0	-
11.6(Combined appliances)	-	0	-
11.7(Duration corresponding)	-	0	-
11.8(Temperature rise)	-	0	-
12(Charging of metal-ion batteries)	-	0	-
13(Leakage current and electric strength at operating temperature)	-	0	-
13.2(Leakage current at operating temperature)	-	0	-
13.3(Electric Strength at operating temperature)	-	0	-
14(Transient Over Voltages)	-	0	-
15.0(Moisture resistance)	-	0	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	0	-
15.2(Spillage Test)	-	0	-
15.3(Humidity Test)	-	0	-
16.0(General)	-	0	-
16.1(General)	-	0	-
16.2(Leakage Current (after Clause 15))	-	0	-
16.3(Electric Strength (after clause 15 and 16.2))	-	0	-
16(Leakage current and electric strength)	-	0	-
17(Over Load Protection of Transformers and associated circuits)	-	0	-
18(Endurance)	-	0	-
18(Endurance)	-	0	-
19(Abnormal Operation)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
19.17(Abnormal operation)	-	0	-
20(Stability and mechanical hazards)	-	0	-
20.1(Stability and mechanical hazards)	-	0	-
21(Mechanical Strength)	-	0	-
21.2(Mechanical strength)	-	0	-
21.3(Mechanical strength)	-	0	-
22(Construction)	-	0	-
22.5(Construction)	-	0	-
22.6(Construction)	-	0	-
22.11(Construction)	-	0	-
22.16(Construction)	-	0	-
22.32(Construction)	-	0	-
22.42(Construction)	-	0	-
23(Internal wiring)	-	0	-
23.3(Internal wiring)	-	0	-
24(Components)	-	0	-
25(Supply connection and external flexible cords)	-	0	-
25(Supply connection and external flexible cords)	-	0	-
25.7(Supply connection and external flexible cords)	-	0	-
25.14(Supply connection and external flexible cords)	-	0	-
25.15(Supply connection and external flexible cords)	-	0	-
26(Terminals for external conductors)	-	0	-
26.5(Terminals for external conductors)	-	0	-
27(Provision for earthing)	-	0	-
27.5(Provision for earthing)	-	0	-
28(Screw test and connections)	-	0	-
28.1(Screws and connections)	-	0	-
29(clearance, creepage distances and solid insulation)	-	0	-
30.1(Ball pressure test)	-	0	-
30.2(Glow Wire Test)	-	0	-
30.2(Needle Flame Test)	-	0	-
31(Resistance to Rusting)	-	0	-
32(Radiation Toxicity and Similar Hazards)	-	0	-
A.2(Earth continuity test)	-	0	-
B.22.1(Construction)	-	0	-
B.22.3(Construction)	-	0	-
B.22.4(Construction)	-	0	-
B.22.5(Construction)	-	0	-
Annex C(Ageing test on motors)	-	0	-
Annex D(Thermal motor protectors)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
15.2(Moisture resistance)	-	0	-
4(General requirement)	-	0	-
5(General conditions for the tests)	-	0	-
6(Classification)	-	0	-
7(Marking and instructions)	-	0	-
8.1.1(Protection against live parts in all positions)	-	0	-
8.1.2(Protection against live parts in openings)	-	0	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	0	-
8.1.4(Protection against live parts against protective impedance)	-	0	-
8.1.5(Live parts of built-in appliances)	-	0	-
9(Starting of motor operation test requirements and tests)	-	0	-
10.1(Power input)	-	0	-
10.2(Current input)	-	0	-
11.1(General)	-	0	-
11.2(General)	-	0	-
11.3(Heating)	-	0	-
11.4(Heating appliances)	-	0	-
11.5(Motor-operated appliances)	-	0	-
11.6(Combined appliances)	-	0	-
11.7(Duration corresponding)	-	0	-
11.8(Temperature rise)	-	0	-
12(Charging of metal-ion batteries)	-	0	-
13(Leakage current and electric strength at operating temperature)	-	0	-
13.2(Leakage current at operating temperature)	-	0	-
13.3(Electric Strength at operating temperature)	-	0	-
14(Transient Over Voltages)	-	0	-
15.0(Moisture resistance)	-	0	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	0	-
15.2(Spillage Test)	-	0	-
15.3(Humidity Test)	-	0	-
16.0(General)	-	0	-
16.1(General)	-	0	-
16.2(Leakage Current (after Clause 15))	-	0	-
16.3(Electric Strength (after clause 15 and 16.2))	-	0	-
16(Leakage current and electric strength)	-	0	-
17(Over Load Protection of Transformers and associated circuits)	-	0	-
18(Endurance)	-	0	-
18(Endurance)	-	0	-
19(Abnormal Operation)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
19.17(Abnormal operation)	-	0	-
20(Stability and mechanical hazards)	-	0	-
20.1(Stability and mechanical hazards)	-	0	-
21(Mechanical Strength)	-	0	-
21.2(Mechanical strength)	-	0	-
21.3(Mechanical strength)	-	0	-
22(Construction)	-	0	-
22.5(Construction)	-	0	-
22.6(Construction)	-	0	-
22.11(Construction)	-	0	-
22.16(Construction)	-	0	-
22.32(Construction)	-	0	-
22.42(Construction)	-	0	-
23(Internal wiring)	-	0	-
23.3(Internal wiring)	-	0	-
24(Components)	-	0	-
25(Supply connection and external flexible cords)	-	0	-
25(Supply connection and external flexible cords)	-	0	-
25.7(Supply connection and external flexible cords)	-	0	-
25.14(Supply connection and external flexible cords)	-	0	-
25.15(Supply connection and external flexible cords)	-	0	-
26(Terminals for external conductors)	-	0	-
26.5(Terminals for external conductors)	-	0	-
27(Provision for earthing)	-	0	-
27.5(Provision for earthing)	-	0	-
28(Screw test and connections)	-	0	-
28.1(Screws and connections)	-	0	-
29(clearance, creepage distances and solid insulation)	-	0	-
30.1(Ball pressure test)	-	0	-
30.2(Glow Wire Test)	-	0	-
30.2(Needle Flame Test)	-	0	-
31(Resistance to Rusting)	-	0	-
32(Radiation Toxicity and Similar Hazards)	-	0	-
A.2(Earth continuity test)	-	0	-
B.22.1(Construction)	-	0	-
B.22.3(Construction)	-	0	-
B.22.4(Construction)	-	0	-
B.22.5(Construction)	-	0	-
Annex C(Ageing test on motors)	-	0	-
Annex D(Thermal motor protectors)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
15.2(Moisture resistance)	-	0	-

15 May, 2025

-
Included w.e.f.28.04.2025 Exclusion Cl 19.11.4.1 to Cl 19.11.4.7(EMI/EMC Test), 32 (Radiation Toxicity and Similar Hazards), 24 (Components), 12 (Charging of metal-ion batteries)

1576

TUV Rheinland (India) Pvt. Ltd.

IS/ISO 80601 : Part 2 : Sec 61 (2017)

Medical electrical equipment Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment

531000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
201.4(Power and Current)	-	20000	10% Discount for BIS samples
201.5(Temperature, Humidity, Dimensions, Force)	-	10000	10% Discount for BIS samples
201.6(Classification of ME EQUIPMENT and ME SYSTEMS)	-	5000	10% Discount for BIS samples
201.7(Legibility & Durability of markings)	-	5000	10% Discount for BIS samples
201.7.2.9.101(Ingress Protection)	-	30000	10% Discount for BIS samples
201.8(Current, Voltage, Energy, Dimensions, Impedance)	-	100000	10% Discount for BIS samples
201.8.3.101(Current, Voltage, Energy, Dimensions, Impedance)	-	20000	10% Discount for BIS samples
201.8.5.5.1(Voltage, Time)	-	20000	10% Discount for BIS samples
201.8.5.5.2(Energy)	-	10000	10% Discount for BIS samples
201.9(Mechanical dimensions, strength , torque, force)	-	30000	10% Discount for BIS samples
201.11(Temperature)	-	18000	10% Discount for BIS samples
201.11.6.5.101(Temperature)	-	18000	10% Discount for BIS samples
201.11.8.101(Power)	-	18000	10% Discount for BIS samples
201.11.8.101.1(Power)	-	18000	10% Discount for BIS samples
201.11.8.101.2(Temperature)	-	18000	10% Discount for BIS samples
201.11.8.101.3(Temperature)	-	18000	10% Discount for BIS samples
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	5000	10% Discount for BIS samples
201.12.1.101, 201.12.1.101.1(SpO2 ACCURACY)	-	5000	10% Discount for BIS samples
201.12.1.101.2(SpO2 ACCURACY)	-	5000	10% Discount for BIS samples
201.12.1.101.3(SpO2 ACCURACY)	-	5000	10% Discount for BIS samples
201.12.1.101.4(SpO2 ACCURACY)	-	5000	10% Discount for BIS samples
201.12.1.102(SpO2 ACCURACY)	-	5000	10% Discount for BIS samples
201.12.1.103(SpO2 ACCURACY)	-	5000	10% Discount for BIS samples
201.13(Temperature, Voltage, Current)	-	15000	10% Discount for BIS samples
201.13.101(Temperature, Voltage, Current)	-	15000	10% Discount for BIS samples
201.15(Mechanical strength, Temperature, current)	-	26000	10% Discount for BIS samples
201.15.3.5.101.1(Shock and vibration)	-	26000	10% Discount for BIS samples
201.15.101(Shock and vibration)	-	26000	10% Discount for BIS samples
201.16(Leakage currents , dielectirc strength)	-	10000	10% Discount for BIS samples
208(Alarm system verification)	-	10000	10% Discount for BIS samples
208.6.1.2.101(Alarm system verification)	-	10000	10% Discount for BIS samples
201.4(Power and Current)	-	0	This is duplicate entry,
201.5(Temperature, Humidity, Dimensions, Force)	-	0	This is duplicate entry,
201.6(Classification of ME EQUIPMENT and ME SYSTEMS)	-	0	This is duplicate entry,
201.7(Legibility & Durability of markings)	-	0	This is duplicate entry,
201.7.2.9.101(Ingress Protection)	-	0	This is duplicate entry,
201.8(Current, Voltage, Energy, Dimensions, Impedance)	-	0	This is duplicate entry,
201.8.3.101(Current, Voltage, Energy, Dimensions, Impedance)	-	0	This is duplicate entry,
201.8.5.5.1(Voltage, Time)	-	0	This is duplicate entry,
201.8.5.5.2(Energy)	-	0	This is duplicate entry,
201.9(Mechanical dimensions, strength , torque, force)	-	0	This is duplicate entry,
201.11(Temperature)	-	0	This is duplicate entry,
201.11.6.5.101(Temperature)	-	0	This is duplicate entry,
201.11.8.101(Power)	-	0	This is duplicate entry,
201.11.8.101.1(Power)	-	0	This is duplicate entry,
201.11.8.101.2(Temperature)	-	0	This is duplicate entry,
201.11.8.101.3(Temperature)	-	0	This is duplicate entry,
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	0	This is duplicate entry,
201.12.1.101, 201.12.1.101.1(SpO2 ACCURACY)	-	0	This is duplicate entry,
201.12.1.101.2(SpO2 ACCURACY)	-	0	This is duplicate entry,
201.12.1.101.3(SpO2 ACCURACY)	-	0	This is duplicate entry,
201.12.1.101.4(SpO2 ACCURACY)	-	0	This is duplicate entry,
201.12.1.102(SpO2 ACCURACY)	-	0	This is duplicate entry,
201.12.1.103(SpO2 ACCURACY)	-	0	This is duplicate entry,
201.13(Temperature, Voltage, Current)	-	0	This is duplicate entry,
201.13.101(Temperature, Voltage, Current)	-	0	This is duplicate entry,
201.15(Mechanical strength, Temperature, current)	-	0	This is duplicate entry,
201.15.3.5.101.1(Shock and vibration)	-	0	This is duplicate entry,
201.15.101(Shock and vibration)	-	0	This is duplicate entry,
201.16(Leakage currents , dielectirc strength)	-	0	This is duplicate entry,
208(Alarm system verification)	-	0	This is duplicate entry,
208.6.1.2.101(Alarm system verification)	-	0	This is duplicate entry,
201.4(Power and Current)	-	0	Duplicate
201.5(Temperature, Humidity, Dimensions, Force)	-	0	Duplicate
201.6(Classification of ME EQUIPMENT and ME SYSTEMS)	-	0	Duplicate
201.7(Legibility & Durability of markings)	-	0	Duplicate
201.7.2.9.101(Ingress Protection)	-	0	Duplicate
201.8(Current, Voltage, Energy, Dimensions, Impedance)	-	0	Duplicate
201.8.3.101(Current, Voltage, Energy, Dimensions, Impedance)	-	0	Duplicate
201.8.5.5.1(Voltage, Time)	-	0	Duplicate
201.8.5.5.2(Energy)	-	0	Duplicate
201.9(Mechanical dimensions, strength , torque, force)	-	0	Duplicate
201.11(Temperature)	-	0	Duplicate
201.11.6.5.101(Temperature)	-	0	Duplicate
201.11.8.101(Power)	-	0	Duplicate
201.11.8.101.1(Power)	-	0	Duplicate
201.11.8.101.2(Temperature)	-	0	Duplicate
201.11.8.101.3(Temperature)	-	0	Duplicate
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	0	Duplicate
201.12.1.101, 201.12.1.101.1(SpO2 ACCURACY)	-	0	Duplicate
201.12.1.101.2(SpO2 ACCURACY)	-	0	Duplicate
201.12.1.101.3(SpO2 ACCURACY)	-	0	Duplicate
201.12.1.101.4(SpO2 ACCURACY)	-	0	Duplicate
201.12.1.102(SpO2 ACCURACY)	-	0	Duplicate
201.12.1.103(SpO2 ACCURACY)	-	0	Duplicate
201.13(Temperature, Voltage, Current)	-	0	Duplicate
201.13.101(Temperature, Voltage, Current)	-	0	Duplicate
201.15(Mechanical strength, Temperature, current)	-	0	Duplicate
201.15.3.5.101.1(Shock and vibration)	-	0	Duplicate
201.15.101(Shock and vibration)	-	0	Duplicate
201.16(Leakage currents , dielectirc strength)	-	0	Duplicate
208(Alarm system verification)	-	0	Duplicate
208.6.1.2.101(Alarm system verification)	-	0	Duplicate
201.4(Power and Current)	-	0	Duplicate Entry
201.5(Temperature, Humidity, Dimensions, Force)	-	0	Duplicate Entry
201.6(Classification of ME EQUIPMENT and ME SYSTEMS)	-	0	Duplicate Entry
201.7(Legibility & Durability of markings)	-	0	Duplicate Entry
201.7.2.9.101(Ingress Protection)	-	0	Duplicate Entry
201.8(Current, Voltage, Energy, Dimensions, Impedance)	-	0	Duplicate Entry
201.8.3.101(Current, Voltage, Energy, Dimensions, Impedance)	-	0	Duplicate Entry
201.8.5.5.1(Voltage, Time)	-	0	Duplicate Entry
201.8.5.5.2(Energy)	-	0	Duplicate Entry
201.9(Mechanical dimensions, strength , torque, force)	-	0	Duplicate Entry
201.11(Temperature)	-	0	Duplicate Entry
201.11.6.5.101(Temperature)	-	0	Duplicate Entry
201.11.8.101(Power)	-	0	Duplicate Entry
201.11.8.101.1(Power)	-	0	Duplicate Entry
201.11.8.101.2(Temperature)	-	0	Duplicate Entry
201.11.8.101.3(Temperature)	-	0	Duplicate Entry
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	0	Duplicate Entry
201.12.1.101, 201.12.1.101.1(SpO2 ACCURACY)	-	0	Duplicate Entry
201.12.1.101.2(SpO2 ACCURACY)	-	0	Duplicate Entry
201.12.1.101.3(SpO2 ACCURACY)	-	0	Duplicate Entry
201.12.1.101.4(SpO2 ACCURACY)	-	0	Duplicate Entry
201.12.1.102(SpO2 ACCURACY)	-	0	Duplicate Entry
201.12.1.103(SpO2 ACCURACY)	-	0	Duplicate Entry
201.13(Temperature, Voltage, Current)	-	0	Duplicate Entry
201.13.101(Temperature, Voltage, Current)	-	0	Duplicate Entry
201.15(Mechanical strength, Temperature, current)	-	0	Duplicate Entry
201.15.3.5.101.1(Shock and vibration)	-	0	Duplicate Entry
201.15.101(Shock and vibration)	-	0	Duplicate Entry
201.16(Leakage currents , dielectirc strength)	-	0	Duplicate Entry
208(Alarm system verification)	-	0	Duplicate Entry
208.6.1.2.101(Alarm system verification)	-	0	Duplicate Entry
201.10(Protection against unwanted and excessive radiation HAZARDS)	-	0	-
201.12.1.104(Pulse rate ACCURACY)	-	0	-
201.12.4(Protection against hazardous output)	-	0	-
211(Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment)	-	0	-
212(Requirements for medical electrical equipment and medical electrical systems used in the emergency medical services environment)	-	0	-
201.101(PULSE OXIMETER PROBES and PROBE CABLE EXTENDERS)	-	0	-
201.102(Saturation pulse INFORMATION SIGNAL)	-	0	-
201.103(FUNCTIONAL CONNECTION)	-	0	Duplicate Entry
201.8(Current, Voltage, Energy, Dimensions, Impedance)	-	0.01	Duplicate Entry
201.8.5.5.1(Voltage, Time)	-	0.01	Duplicate Entry
201.11.6.5.101(Temperature)	-	0.01	Duplicate Entry
201.10(Protection against unwanted and excessive radiation HAZARDS)	-	0	Excluded
201.12.1.104(Pulse rate ACCURACY)	-	0	Duplicate Entry
201.12.4(Protection against hazardous output)	-	0	Duplicate Entry
211(Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment)	-	0	Duplicate Entry
212(Requirements for medical electrical equipment and medical electrical systems used in the emergency medical services environment)	-	0	Duplicate Entry
201.101(PULSE OXIMETER PROBES and PROBE CABLE EXTENDERS)	-	0	Duplicate Entry
201.102(Saturation pulse INFORMATION SIGNAL)	-	0	Duplicate Entry
201.103(FUNCTIONAL CONNECTION)	-	0	Duplicate Entry

03 Feb, 2027

-
Included w.e.f. 25.08.2023 Exclusion: Cl. 201.17 (Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS), Cl. 202 (Electromagnetic disturbances – Requirements and tests), Cl. 201.10 (Protection against unwanted and excessive radiation HAZARDS)

1577

TUV Rheinland (India) Pvt. Ltd.

IS 13450 : Part 2 : Sec 25 (2018)

Medical Electrical Equipment Part 2 Particular Requirements for the Basic Safety and Essential Performance Section 25 Electrocardiographs

610000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
201.4(Power and Current)	-	10000	10% Discount for BIS samples
201.5(Temperature, Humidity, Dimensions, Force)	-	15000	10% Discount for BIS samples
201.7.4.101(Qualitative)	-	15000	10% Discount for BIS samples
201.8(Current, Voltage, Energy, Dimensions, Impedance)	-	10000	10% Discount for BIS samples
201.8.5.5.1(Voltage, Time)	-	15000	10% Discount for BIS samples
201.8.5.5.2(Energy)	-	15000	10% Discount for BIS samples
201.9(Mechanical dimensions, strength , torque, force)	-	30000	10% Discount for BIS samples
201.11(Temperature)	-	40000	10% Discount for BIS samples
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	5000	10% Discount for BIS samples
201.12.1.101.1(Automated measurements on ECGS)	-	10000	10% Discount for BIS samples
201.12.1.101.2(Requirements for amplitude measurements)	-	10000	10% Discount for BIS samples
201.12.1.101.3(Requirements for interval measurements)	-	10000	10% Discount for BIS samples
201.12.1.101.3.1(* Requirements for absolute interval and wave duration measurements)	-	10000	10% Discount for BIS samples
201.12.1.101.3.2()	-	10000	10% Discount for BIS samples
201.12.4(Protection against hazardous output)	-	10000	10% Discount for BIS samples
201.12.4.101(Indication of inoperable ELECTROCARDIOGRAPH)	-	10000	10% Discount for BIS samples
201.12.4.102(ECG signals)	-	10000	10% Discount for BIS samples
201.12.4.102.1(ECG signals)	-	10000	10% Discount for BIS samples
201.12.4.102.2(Minimum required configuration)	-	10000	10% Discount for BIS samples
201.12.4.102.3(ECG signals)	-	10000	10% Discount for BIS samples
201.12.4.102.3.1(General)	-	10000	10% Discount for BIS samples
201.12.4.102.3.2(Goldberger and Wilson LEADS)	-	10000	10% Discount for BIS samples
201.12.4.102.4(Recovery time)	-	10000	10% Discount for BIS samples
201.12.4.103(Input impedance)	-	10000	10% Discount for BIS samples
201.12.4.104(Required GAINS)	-	5000	10% Discount for BIS samples
201.12.4.105.2(Overload tolerance)	-	20000	10% Discount for BIS samples
201.12.4.105.3(FILTERS (including line frequency interference FILTERS))	-	10000	10% Discount for BIS samples
201.12.4.106.1(Noise level)	-	10000	10% Discount for BIS samples
201.12.4.106.2(CHANNEL crosstalk)	-	10000	10% Discount for BIS samples
201.12.4.107.1.1.1(High Frequency Response)	-	10000	10% Discount for BIS samples
201.12.4.107.1.1.2(Low frequency (impulse) response)	-	10000	10% Discount for BIS samples
201.12.4.107.1.2(Test with calibration ECG)	-	10000	10% Discount for BIS samples
201.12.4.107.2(Linearity and Dynamic range)	-	10000	10% Discount for BIS samples
201.12.4.107.3(Sampling and amplitude quantisation during data acquisition)	-	5000	10% Discount for BIS samples
201.12.4.108(Printing, electronic storage and transmission)	-	5000	10% Discount for BIS samples
201.12.4.108.1(Record identification)	-	5000	10% Discount for BIS samples
201.12.4.108.2(PATIENT identification)	-	5000	10% Discount for BIS samples
201.12.4.108.3.1(Time and event markers)	-	10000	10% Discount for BIS samples
201.12.4.108.3.2(Recording speed)	-	10000	10% Discount for BIS samples
201.12.4.108.3.3(Time and amplitude ruling)	-	10000	10% Discount for BIS samples
201.12.4.109(Use with cardiac pacemakers)	-	10000	10% Discount for BIS samples
201.13(HAZARDOUS SITUATIONS and fault conditions)	-	15000	10% Discount for BIS samples
201.15(Mechanical strength, Temperature, current)	-	55000	10% Discount for BIS samples
201.16(Leakage currents , dielectirc strength)	-	20000	10% Discount for BIS samples
201.4(Power and Current)	-	0	Duplicate Entry
201.5(Temperature, Humidity, Dimensions, Force)	-	0	Duplicate Entry
201.7.4.101(Qualitative)	-	0	Duplicate Entry
201.8(Current, Voltage, Energy, Dimensions, Impedance)	-	0	Duplicate Entry
201.8.5.5.1(Voltage, Time)	-	0	Duplicate Entry
201.8.5.5.2(Energy)	-	0	Duplicate Entry
201.9(Mechanical dimensions, strength , torque, force)	-	0	Duplicate Entry
201.11(Temperature)	-	0	Duplicate Entry
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	0	Duplicate Entry
201.12.1.101.1(Automated measurements on ECGS)	-	0	Duplicate Entry
201.12.1.101.2(Requirements for amplitude measurements)	-	0	Duplicate Entry
201.12.1.101.3(Requirements for interval measurements)	-	0	Duplicate Entry
201.12.1.101.3.1(* Requirements for absolute interval and wave duration measurements)	-	0	Duplicate Entry
201.12.1.101.3.2()	-	0	Duplicate Entry
201.12.4(Protection against hazardous output)	-	0	Duplicate Entry
201.12.4.101(Indication of inoperable ELECTROCARDIOGRAPH)	-	0	Duplicate Entry
201.12.4.102(ECG signals)	-	0	Duplicate Entry
201.12.4.102.1(ECG signals)	-	0	Duplicate Entry
201.12.4.102.2(Minimum required configuration)	-	0	Duplicate Entry
201.12.4.102.3(ECG signals)	-	0	Duplicate Entry
201.12.4.102.3.1(General)	-	0	Duplicate Entry
201.12.4.102.3.2(Goldberger and Wilson LEADS)	-	0	Duplicate Entry
201.12.4.102.4(Recovery time)	-	0	Duplicate Entry
201.12.4.103(Input impedance)	-	0	Duplicate Entry
201.12.4.104(Required GAINS)	-	0	Duplicate Entry
201.12.4.105.2(Overload tolerance)	-	0	Duplicate Entry
201.12.4.105.3(FILTERS (including line frequency interference FILTERS))	-	0	Duplicate Entry
201.12.4.106.1(Noise level)	-	0	Duplicate Entry
201.12.4.106.2(CHANNEL crosstalk)	-	0	Duplicate Entry
201.12.4.107.1.1.1(High Frequency Response)	-	0	Duplicate Entry
201.12.4.107.1.1.2(Low frequency (impulse) response)	-	0	Duplicate Entry
201.12.4.107.1.2(Test with calibration ECG)	-	0	Duplicate Entry
201.12.4.107.2(Linearity and Dynamic range)	-	0	Duplicate Entry
201.12.4.107.3(Sampling and amplitude quantisation during data acquisition)	-	0	Duplicate Entry
201.12.4.108(Printing, electronic storage and transmission)	-	0	Duplicate Entry
201.12.4.108.1(Record identification)	-	0	Duplicate Entry
201.12.4.108.2(PATIENT identification)	-	0	Duplicate Entry
201.12.4.108.3.1(Time and event markers)	-	0	Duplicate Entry
201.12.4.108.3.2(Recording speed)	-	0	Duplicate Entry
201.12.4.108.3.3(Time and amplitude ruling)	-	0	Duplicate Entry
201.12.4.109(Use with cardiac pacemakers)	-	0	Duplicate Entry
201.13(HAZARDOUS SITUATIONS and fault conditions)	-	0	Duplicate Entry
201.15(Mechanical strength, Temperature, current)	-	0	Duplicate Entry
201.16(Leakage currents , dielectirc strength)	-	0	Duplicate Entry
201.7(ME EQUIPMENT identification, marking and documents)	-	0	Duplicate Entry
201.12.4.107.1.1.2(Low frequency (impulse) response)	-	0.01	Duplicate Entry
201.12.4.108.1(Record identification)	-	0.01	Duplicate Entry
201.12.4.108.3.3(Time and amplitude ruling)	-	0	-
201.7(ME EQUIPMENT identification, marking and documents)	-	0	Duplicate Entry
201.10(Protection against unwanted and excessive radiation HAZARDS)	-	0	Duplicate Entry
201.6(Classification of ME EQUIPMENT and ME SYSTEMS)	-	0	Duplicate Entry
201.4(Power and Current)	-	0.01	Duplicate Entry
201.5(Temperature, Humidity, Dimensions, Force)	-	0.01	Duplicate Entry
201.12.1.101.3(Requirements for interval measurements)	-	0.01	Duplicate Entry
201.12.4(Protection against hazardous output)	-	0.01	Duplicate Entry
201.12.4.102.3.2(Goldberger and Wilson LEADS)	-	0.01	Duplicate Entry
201.12.4.107.2(Linearity and Dynamic range)	-	0.01	Duplicate Entry
201.12.4.107.3(Sampling and amplitude quantisation during data acquisition)	-	0.01	Duplicate Entry
201.6(Classification of ME EQUIPMENT and ME SYSTEMS)	-	0	Duplicate Entry

03 Feb, 2027

-
Included w.e.f. 25.08.2023 Exclusion: Cl. 201.17 (Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS), Cl. 202 (Electromagnetic compatibility – Requirements and tests), Cl. 202.6.1 (EMISSIONS), Cl. 202.6.2.2 (ELECTROSTATIC DISCHARGE (ESD)), Cl. 202.6.2.3 (Radiated RF electromagnetic fields), Cl. 202.6.2.4 (Electrical fast transients and bursts), Cl. 202.6.2.6 (Conducted disturbances, induced by RF fields), Cl. 202.6.2.101 (Electrosurgery interference), Cl. 201.10 (Protection against unwanted and excessive radiation HAZARDS)

1578

TUV Rheinland (India) Pvt. Ltd.

IS 17625 : Part 2 : Sec 69 (2021)

Medical Electrical Equipment Part 2 Particular Requirements for Basic Safety and Essential Performance Section 69 Oxygen Concentrator Equipment

610000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
201.4(Power and Current)	-	20000	10% Discount for BIS samples
201.5(Temperature, Humidity, Dimensions, Force)	-	120000	10% Discount for BIS samples
201.7.1.2(Legibility of markings)	-	30000	10% Discount for BIS samples
201.8(Current, Voltage, Energy, Dimensions, Impedance)	-	115000	10% Discount for BIS samples
201.9(Mechanical dimensions, strength , torque, force)	-	35000	10% Discount for BIS samples
201.9.6.2.1.101(Additional requirements for audible acoustic energy)	-	35000	10% Discount for BIS samples
201.11(Protection against excessive temperatures and other HAZARDS)	-	12000	10% Discount for BIS samples
201.11.1(Maximum temperature during NORMAL USE)	-	12000	10% Discount for BIS samples
"201.11. 1.2.2"(APPLIED PARTS not intended to supply heat to a PATIENT)	-	12000	10% Discount for BIS samples
201.11.2.101(Additional requirements for fire prevention)	-	12000	10% Discount for BIS samples
201.11.6.7(Leakage currents , dielectirc strength)	-	12000	10% Discount for BIS samples
"201.11. 8.101"()	-	12000	10% Discount for BIS samples
201.11.8.101.1(TECHNICAL ALARM CONDITION for power supply failure)	-	12000	10% Discount for BIS samples
201.11.8.101.2(INTERNAL ELECTRICAL POWER SOURCE)	-	12000	10% Discount for BIS samples
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	15000	10% Discount for BIS samples
"201.12. 1"(Legibility of markings)	-	5000	10% Discount for BIS samples
201.12.1.101(Flowrate control)	-	15000	10% Discount for BIS samples
201.12.1.103(Accuracy of concentration)	-	15000	10% Discount for BIS samples
201.12.1.104(Outlet pressure)	-	15000	10% Discount for BIS samples
201.12.4.4.101.2(Indication of start-up period)	-	5000	10% Discount for BIS samples
201.12.4.102(Low oxygen concentration ALARM CONDITION)	-	5000	10% Discount for BIS samples
201.13(HAZARDOUS SITUATIONS and fault conditions)	-	12000	10% Discount for BIS samples
201.13.2.101(Additional specific SINGLE FAULT CONDITIONS)	-	12000	10% Discount for BIS samples
201.15(Mechanical strength, Temperature, current)	-	30000	10% Discount for BIS samples
201.16(Leakage currents , dielectirc strength)	-	10000	10% Discount for BIS samples
201.17(Electromagnetic compatibility)	-	0	Test under exclusion
201.102.3(Fire RISK reduction in ACCESSORIES)	-	10000	10% Discount for BIS samples
211(Temperature, humidity, altitude, IP, Vibration, Mechanical shock)	-	10000	10% Discount for BIS samples
201.4(Power and Current)	-	0	Duplicate
201.5(Temperature, Humidity, Dimensions, Force)	-	0	Duplicate
201.7.1.2(Legibility of markings)	-	0	Duplicate
201.8(Current, Voltage, Energy, Dimensions, Impedance)	-	0	Duplicate
201.9(Mechanical dimensions, strength , torque, force)	-	0	Duplicate
201.9.6.2.1.101(Additional requirements for audible acoustic energy)	-	0	Duplicate
201.11(Protection against excessive temperatures and other HAZARDS)	-	0	Duplicate
201.11.1(Maximum temperature during NORMAL USE)	-	0	Duplicate
"201.11. 1.2.2"(APPLIED PARTS not intended to supply heat to a PATIENT)	-	0	Duplicate
201.11.2.101(Additional requirements for fire prevention)	-	0	Duplicate
201.11.6.7(Leakage currents , dielectirc strength)	-	0	Duplicate
"201.11. 8.101"()	-	0	Duplicate
201.11.8.101.1(TECHNICAL ALARM CONDITION for power supply failure)	-	0	Duplicate
201.11.8.101.2(INTERNAL ELECTRICAL POWER SOURCE)	-	0	Duplicate
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	0	Duplicate
"201.12. 1"(Legibility of markings)	-	0	Duplicate
201.12.1.101(Flowrate control)	-	0	Duplicate
201.12.1.103(Accuracy of concentration)	-	0	Duplicate
201.12.1.104(Outlet pressure)	-	0	Duplicate
201.12.4.4.101.2(Indication of start-up period)	-	0	Duplicate
201.12.4.102(Low oxygen concentration ALARM CONDITION)	-	0	Duplicate
201.13(HAZARDOUS SITUATIONS and fault conditions)	-	0	Duplicate
201.13.2.101(Additional specific SINGLE FAULT CONDITIONS)	-	0	Duplicate
201.15(Mechanical strength, Temperature, current)	-	0	Duplicate
201.16(Leakage currents , dielectirc strength)	-	0	Duplicate
201.17(Electromagnetic compatibility)	-	0	Duplicate
201.102.3(Fire RISK reduction in ACCESSORIES)	-	0	Duplicate
211(Temperature, humidity, altitude, IP, Vibration, Mechanical shock)	-	0	Duplicate
201.4(Power and Current)	-	0.01	Duplicate Entry
201.5(Temperature, Humidity, Dimensions, Force)	-	0	Duplicate Entry
201.7.1.2(Legibility of markings)	-	0.01	Duplicate Entry
201.8(Current, Voltage, Energy, Dimensions, Impedance)	-	0	Duplicate Entry
201.9(Mechanical dimensions, strength , torque, force)	-	0	Duplicate Entry
201.9.6.2.1.101(Additional requirements for audible acoustic energy)	-	0	Duplicate Entry
201.11(Protection against excessive temperatures and other HAZARDS)	-	0	Duplicate Entry
201.11.1(Maximum temperature during NORMAL USE)	-	0	Duplicate Entry
"201.11. 1.2.2"(APPLIED PARTS not intended to supply heat to a PATIENT)	-	0	Duplicate Entry
201.11.2.101(Additional requirements for fire prevention)	-	0	Duplicate Entry
201.11.6.7(Leakage currents , dielectirc strength)	-	0	Duplicate Entry
"201.11. 8.101"()	-	0	Duplicate Entry
201.11.8.101.1(TECHNICAL ALARM CONDITION for power supply failure)	-	0	Duplicate Entry
201.11.8.101.2(INTERNAL ELECTRICAL POWER SOURCE)	-	0.01	Duplicate Entry
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	0.01	Duplicate Entry
"201.12. 1"(Legibility of markings)	-	0	Duplicate Entry
201.12.1.101(Flowrate control)	-	0	Duplicate Entry
201.12.1.103(Accuracy of concentration)	-	0	Duplicate Entry
201.12.1.104(Outlet pressure)	-	0	Duplicate Entry
201.12.4.4.101.2(Indication of start-up period)	-	0	Duplicate Entry
201.12.4.102(Low oxygen concentration ALARM CONDITION)	-	0	Duplicate Entry
201.13(HAZARDOUS SITUATIONS and fault conditions)	-	0	Duplicate Entry
201.13.2.101(Additional specific SINGLE FAULT CONDITIONS)	-	0	Duplicate Entry
201.15(Mechanical strength, Temperature, current)	-	0	Duplicate Entry
201.16(Leakage currents , dielectirc strength)	-	0	Duplicate Entry
201.17(Electromagnetic compatibility)	-	0	Duplicate Entry
201.102.3(Fire RISK reduction in ACCESSORIES)	-	0	Duplicate Entry
211(Temperature, humidity, altitude, IP, Vibration, Mechanical shock)	-	0	Duplicate Entry
201.7(ME equipment identification, marking and documents)	-	0	Duplicate Entry
201.10(Protection against unwanted and excessive radiaton hazards)	-	0	Excluded
201.11.3.101(Additional requirements for fire enclosures of ME equipment)	-	0	Duplicate Entry
12.11.6.6(Cleaning and disinfection of ME equipment or ME system)	-	0	Duplicate Entry
201.4(Power and Current)	-	0	Duplicate Entry
201.7.1.2(Legibility of markings)	-	0	Duplicate Entry
201.11.8.101.2(INTERNAL ELECTRICAL POWER SOURCE)	-	0	Duplicate Entry
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	0	Duplicate Entry
201.7(ME equipment identification, marking and documents)	-	0	Duplicate Entry
201.10(Protection against unwanted and excessive radiaton hazards)	-	0	Duplicate Entry
201.11.3.101(Additional requirements for fire enclosures of ME equipment)	-	0	Duplicate Entry
12.11.6.6(Cleaning and disinfection of ME equipment or ME system)	-	0	Duplicate Entry
201.6(Classification of ME equipment and ME systems)	-	0	Duplicate Entry
201.12.4.103(Filter for the delivered gas)	-	0	Duplicate Entry
201.12.4.4.101.1(Flowrate control)	-	0	Duplicate Entry
201.6(Classification of ME equipment and ME systems)	-	0	Duplicate Entry
201.12.4.103(Filter for the delivered gas)	-	0	Duplicate Entry
201.12.4.4.101.1(Flowrate control)	-	0	Duplicate Entry
201.9.6.2.1.101(Additional requirements for audible acoustic energy)	-	0.01	Duplicate Entry
201.11.6.7(Leakage currents , dielectirc strength)	-	0.01	Duplicate Entry
201.12.1.101(Flowrate control)	-	0.01	Duplicate Entry
201.12.1.103(Accuracy of concentration)	-	0.01	Duplicate Entry
201.12.1.104(Outlet pressure)	-	0.01	Duplicate Entry
201.13(HAZARDOUS SITUATIONS and fault conditions)	-	0.01	Duplicate Entry
12.11.6.6(Cleaning and disinfection of ME equipment or ME system)	-	0.01	Duplicate Entry

03 Feb, 2027

-
-

1579

TUV Rheinland (India) Pvt. Ltd.

IS 17334 (2019)

Medical textiles – Surgical gowns and surgical drapes – Specification

75000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1, Table 1 (i.)(Impact penetration)	-	5000	10 % Discount for BIS Sample
7.1 Table 1 (vii.)(bursting strength (dry and wet) (kPa))	-	5000	10 % Discount for BIS Sample
7.1 Table 1 (vi.)(tensile strength (dry and wet) (N))	-	5000	10 % Discount for BIS Sample
7.1 Table 1 (v.)(Particle release)	-	5000	10 % Discount for BIS Sample
7.1 Table 1 (iii.)(Blood resistance)	-	0	Excluded
7.1 Table 1 (ii.)(Hydrostatic resistance (cmwc))	-	5000	10 % Discount for BIS Sample
7.1 Table 1 (xi.)(Biocompatability evaluation Cytotoxicity, Irritation and skin sensitization)	-	25000	10 % Discount for BIS Sample
7.1 Table 1 (xii.)(Moisture vapour transmission rate (Max.))	-	0	excluded
7.1 Table 1 (x.)(Resistance to microbial penetration — Wet (IB))	-	0	Excluded
7.1 Table 1 (ix.)(Resistance to microbial penetration — Dry (CFU))	-	10000	10 % Discount for BIS Sample
7.1 Table 1 (viii.)(Cleanliness–microbial (CFU/100 cm2))	-	15000	10 % Discount for BIS Sample
7.1 Table 1 (iv.)(Viral resistance)	-	0	Excluded

03 Feb, 2027

-
-

1580

TUV Rheinland (India) Pvt. Ltd.

IS 16289 (2014)

Medical textiles - Surgical face masks - Specification

Medical Textile - Sugical face mask

22000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(Materials and Construction)	-	2000	10 % Discount for BIS Sample
4.2 Table 1 i)(Bacterial Filtration Efficiency)	-	5000	10 % Discount for BIS Sample
4.2 Table 1 ii)(Differential Pressure)	-	5000	10 % Discount for BIS Sample
4.2 Table 1 iii)(Splash Resistance)	-	5000	10 % Discount for BIS Sample
4.2 Table 1 iv)(Sub-micron particulate filtration efficiency at 0.1 µ)	-	5000	10 % Discount for BIS Sample

03 Feb, 2027

-
-

1581

TUV Rheinland (India) Pvt. Ltd.

IS 9473 (2002)

Respiratory protective devices - Filtering half masks to protect against particles - Specification (First Revision)

55000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.1(Material)	-	0	Nil
Cl 5.2(Cleaning and Disinfecting)	-	4000	10 % Discount for BIS Sample
Cl 5.3(Practical Performance Test)	-	4000	10 % Discount for BIS Sample
Cl 5.4(Leakage)	-	5000	10 % Discount for BIS Sample
Cl 5.5(Compatibility with Skin)	-	4000	10 % Discount for BIS Sample
Cl 5.6(Flammability)	-	5000	10 % Discount for BIS Sample
Cl 5.7(Carbon Dioxide Content of the Inhalation Air)	-	5000	10 % Discount for BIS Sample
Cl 5.8(Head Harness)	-	4000	10 % Discount for BIS Sample
Cl 5.9(Field of Vision)	-	4000	10 % Discount for BIS Sample
Cl 5.10(Inhalation and Exhalation Valves)	-	5000	10 % Discount for BIS Sample
Cl 5.11(Breathing Resistance)	-	5000	10 % Discount for BIS Sample
Cl 5.12(Clogging (Coal & Dolomite))	-	8000	10 % Discount for BIS Sample
5.13(Demountable Parts, Visual Inspection )	-	2000	10 % Discount for BIS Sample

03 Feb, 2027

-
-

1582

DELHI TEST HOUSE, Azadhpur

IS 17782 (2021)

FORTIFIED RICE KERNELS-SPECIFICATION

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Description)	-	500	-
4.1.1(length, breadth, and thickness)	-	1500	-
4.1.2(length, breadth, thickness, thousand kernel weight, and true density)	-	1000	-
4.1.6(ree from added colouring matter, metal peices and other impurities)	-	1000	-
Table-1, (4.1.3, 4.1.5 and 8)(i) Iron, mg/100 g)	-	2000	-
Table-1, (4.1.3, 4.1.5 and 8)(ii) Folic acid, μg/100 g)	-	2000	-
Table-1, (4.1.3, 4.1.5 and 8)(iii) Vitamin B12, μg/100 g)	-	2000	-
Table-2, 4.1.4, 4.1.5 and 8(i) Zinc, mg/100 g)	-	2000	-
Table-2, 4.1.4, 4.1.5 and 8(ii) Vitamin A, μg/100 g)	-	2000	-
Table-2, 4.1.4, 4.1.5 and 8(iii) Thiamine)	-	2500	-
Table-2, 4.1.4, 4.1.5 and 8(iv) Riboflavin (Vitamin B2), mg/100 g)	-	2500	-
Table-2, 4.1.4, 4.1.5 and 8(v) Niacin (Vitamin B3), mg/100 g)	-	2500	-
Table-2, 4.1.4, 4.1.5 and 8(vi) Pyridoxine (Vitamin B6), mg/100 g)	-	2500	-
Table-3, 4.1.6 and 8(i) Moisture content,)	-	1000	-
Table-3, 4.1.6 and 8(ii) Broken fortified rice kernels,)	-	1000	-
Table-3, 4.1.6 and 8(iii) Foreign matter,)	-	1000	-
Table-3, 4.1.6 and 8(iv) Damaged grains)	-	1000	-
Table-3, 4.1.6 and 8(v) Discolored grains)	-	1000	-
Table-3, 4.1.6 and 8(vi) Chalky grains)	-	1000	-
Table-3, 4.1.6 and 8(vii) Admixture)	-	1000	-
Table-4, 4.7 and 8(i) Total plate count,)	-	3000	-
Table-4, 4.7 and 8(ii) Yeasts and moulds,)	-	3000	-
Table-4, 4.7 and 8(iii) Coliform count,)	-	3000	-
4.5(Cooking Quality)	-	1000	-

-
Exclusion: Cl.4.5.3 (Texture of the cooked fortified rice)

1583

Alpha Test House Services LLP

IS 3650 (1981)

Specification for combination side cutting pliers (Second Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3 Table 1(Dimensions- L)	-	25000	-
3 Table 1(Dimensions- a)	-	25000	-
3 Table 1(Dimensions- b)	-	25000	-
3 Table 1(Dimensions- c1)	-	25000	-
3 Table 1(Dimensions- e)	-	25000	-
3 Table 1(Dimensions- h)	-	25000	-
3 Table 1(Dimensions- h1)	-	25000	-
3 Table 1(Dimensions- t)	-	25000	-
4(Hardness- Near cutting edges)	-	25000	-
4(Hardness- Body gripping surfce)	-	25000	-
8.1(Cutting Test)	-	25000	-
8.1(Cutting Test)	-	25000	-
8.2(Tube Gripping Test)	-	25000	-
8.3(Shock Test)	-	25000	-
8.4(Torsion Test)	-	25000	-
8.5(Handle Load Test)	-	25000	-
8.5(Handle Load Test)	-	25000	-
8.6(Bend Test)	-	25000	-
8.7(Insulation Test)	-	25000	-
6(Insulation)	-	25000	-
5(Material testing (Chemical composition))	-	25000	-
5(Workmanship & Finish test)	-	25000	-

31 Dec, 2026

-
-

1584

Alpha Test House Services LLP

IS 1363 : Part 3 (2018)

Hexagon Head Bolts, Screws and Nuts of Product Grade ˜C ™ Part 3 (Style 1) Hexagon Nuts ( Size Range M 5 to M 64 ) ( Fifth Revision )

M5-M64

16000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3-Table 1(Dimensions-D)	-	16000	-
3-Table 1(Dimensions-P)	-	16000	-
3-Table 1(Dimensions-dw(minimum))	-	16000	-
3-Table 1(Dimensions-e(minimum))	-	16000	-
3-Table 1(Dimensions-m(minimum))	-	16000	-
3-Table 1(Dimensions-m(maximum))	-	16000	-
3-Table 1(Dimensions-mw(minimum))	-	16000	-
3-Table 1(Dimensions-s(minimum))	-	16000	-
3-Table 1(Dimensions-s(maximum))	-	16000	-
3-Table 2(Dimensions-D)	-	16000	-
3-Table 2(Dimensions-P)	-	16000	-
3-Table 2(Dimensions-dw(minimum))	-	16000	-
3-Table 2(Dimensions-e(minimum))	-	16000	-
3-Table 2(Dimensions-m(minimum))	-	16000	-
3-Table 2(Dimensions-m(maximum))	-	16000	-
3-Table 2(Dimensions-mw(minimum))	-	16000	-
3-Table 2(Dimensions-s(minimum))	-	16000	-
3-Table 2(Dimensions-s(maximum))	-	16000	-
4-Table 3(General requirements)	-	16000	-
4-Table 3(Threads-ISO 724 & 965(1))	-	16000	-
4-Table 3(Mechanical property-Property class (ISO 898-1))	-	16000	-
4-Table 3(Mechanical property-Tensile strength (ISO 898-1))	-	16000	-
4-Table 3(Mechanical property-Lower yield strength (ISO 898-1) )	-	16000	-
4-Table 3(Mechanical property-Stress at 0,2 % non-proportional elongation (ISO 898-1))	-	16000	-
4-Table 3(Mechanical property-Stress at 0,0048d non-proportional elongation for full-size fasteners (ISO 898-1))	-	16000	-
4-Table 3(Mechanical property-Stress under proof load (ISO 898-1))	-	16000	-
4-Table 3(Mechanical property-Proof strength ratio (ISO 898-1))	-	16000	-
4-Table 3(Mechanical property-Percentage elongation after fracture for machined test pieces (ISO 898-1))	-	16000	-
4-Table 3(Mechanical property-Percentage reduction of area after fracture for machined test pieces (ISO 898-1))	-	16000	-
4-Table 3(Mechanical property-Elongation after fracture for full-size fasteners (ISO 898-1))	-	16000	-
4-Table 3(Mechanical property-Head soundness (ISO 898-1))	-	16000	-
4-Table 3(Mechanical property-Vickers hardness (ISO 898-1))	-	16000	-
4-Table 3(Mechanical property-Brinell hardness (ISO 898-1))	-	16000	-
4-Table 3(Mechanical property-Rockwell hardness (ISO 898-1) HRB)	-	16000	-
4-Table 3(Mechanical property-Rockwell hardness (ISO 898-1) HRC)	-	16000	-
4-Table 3(Mechanical property-Surface hardness (ISO 898-1))	-	16000	-
4-Table 3(Mechanical property-Non-carburization (ISO 898-1))	-	16000	-
4-Table 3(Mechanical property-Height of non-decarburized thread zone (ISO 898-1))	-	16000	-
4-Table 3(Mechanical property-Depth of complete decarburization in the thread (ISO 898-1))	-	16000	-
4-Table 3(Mechanical property-Reduction of hardness after retempering (ISO 898-1))	-	16000	-
4-Table 3(Mechanical property-Breaking torque (ISO 898-1))	-	16000	-
4-Table 3(Mechanical property-Impact strength (ISO 898-1))	-	16000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Quench Cracks(ISO 6157-1))	-	16000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging cracks (ISO 6157-1))	-	16000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts (ISO 6157-1)- Chamfer Circle)	-	16000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts (ISO 6157-1))	-	16000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts-Hexagon head screw (ISO 6157-1))	-	16000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts-Circular head screws (ISO 6157-1))	-	16000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging Bursts-Circular head screws (ISO 6157-1))	-	16000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts (ISO 6157-1) (Chamfer Circle))	-	16000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts (ISO 6157-1))	-	16000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Hexagon head screw (ISO 6157-1))	-	16000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear Bursts-Circular head screws (ISO 6157-1))	-	16000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Circular head screws (ISO 6157-1))	-	16000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Raw material seams and laps (ISO 6157-1))	-	16000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Voids (ISO 6157-1))	-	16000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Folds (ISO 6157-1))	-	16000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Tool marks (ISO 6157-1))	-	16000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Damages (ISO 6157-1) (Impairs Usability))	-	16000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Damages (ISO 6157-1))	-	16000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-- Quench cracks (ISO 6157-3))	-	16000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks - (ISO 6157-3))	-	16000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts (ISO 6157-3) Chamfer Circle)	-	16000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts (ISO 6157-3))	-	16000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts-Hexagon head screw (ISO 6157-3))	-	16000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts-Circular head screws (ISO 6157-3))	-	16000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts-Circular head screws (ISO 6157-3))	-	16000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Hexagon head screws-Width (ISO 6157-3))	-	16000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Hexagon head screws-Depth (ISO 6157-3))	-	16000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Hexagon head screws (ISO 6157-3))	-	16000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Hexagon head screws (ISO 6157-3))	-	16000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Hexagon head screws (ISO 6157-3))	-	16000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Circular head screws - (ISO 6157-3))	-	16000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Circular head screws - (ISO 6157-3))	-	16000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	16000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	16000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	16000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	16000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	16000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	16000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	16000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Raw material, seams and laps- (ISO 6157-3))	-	16000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Voids- (ISO 6157-3))	-	16000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Folds- (ISO 6157-3))	-	16000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Tool marks - (ISO 6157-3))	-	16000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Laps on the thread - (ISO 6157-3))	-	16000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Laps on the thread - (ISO 6157-3))	-	16000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Damages - (ISO 6157-3))	-	16000	-

31 Dec, 2026

-
-

1585

Winwall Technology India Private Limited

IS 2553 : Part 1 (2018)

Safety glass - Specification: Part 1 architectural, building and general uses (Fourth Revision)

Toughened Glass, Laminated Glass

95000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.2.1( Dimensions- Length)	-	5011	-
5.2.2.1( Dimensions- Width )	-	5011	-
5.2.2.2( Squareness)	-	5011	-
5.2.1 (Thickness -IS 17004 & IS 14900)	-	5124	-
5.2.3 (Fragmentation Test- IS 17004)	-	6271	-
5.2.4-a( Flatness-Overall bow-IS 17004)	-	6423	-
5.2.4-b( Flatness-Roller wave distortion-IS 17005)	-	6423	-
5.2.4-c( Flatness-Edge lift-IS 17006)	-	6423	-
5.2.4-d( Flatness-Local distortion-IS 17007)	-	6423	-
5.2.5.1( Resistance to shock- IS 17004)	-	5571	-
5.2.7( Mechanical Strength — Four Point Bending Test (Optional)- IS 17004)	-	9998	-
5.2.5.2( Resistance to human impact- IS 17004)	-	9998	-
5.2.6( Surface Compression (Optional)- IS 17004)	-	6423	-
5.3.1 (Thickness-IS 17004 & IS 14900)	-	5124	-
5.3.2.1( Dimensions and squareness- Width )	-	5149	-
5.3.2.1( Dimensions and squareness- Length)	-	5149	-
5.3.2.1( Dimensions and squareness-Squareness)	-	5149	-
5.3.2.2 (Edge displacement)	-	5149	-
5.3.3( Light Stability Test-IS 17004)	-	26840	-
5.3.4( Boil and Bake Tests-IS 17004)	-	8611	-
5.3.5( Fracture and Adhesion Test-IS 17004)	-	7157	-
5.3.6.1( Spot defects in the central area)	-	4920	-
5.3.6.2 (Linear defects in the central area)	-	4920	-
5.3.8(Resistance to human impact)	-	9998	-
5.3.7( Humidity Test – Optional)	-	80172	-
5.2.8.1 & 5.2.8.3-Table 7(Diameter of Holes & Deviations on holes )	-	5124	-
5.2.4.1 (Other distortions)	-	5124	-
5.3.6.3( Defects in the outer area for framed edges)	-	5124	-
5.3.5( Fracture and Adhesion Test-IS 17004)	-	7157	-
5.1.2(Optical Faults-IS 14900)	-	6039	-
5.1.2(Spot Faults of category A/B/C/D -IS 14900)	-	6039	-
5.1.2(Reams, Strings and Lines-IS 14900)	-	6039	-
5.1.2(Linear / Extended Faults -IS 14900)	-	6039	-
4(Types)	-	1000	-
5.1.1(General)	-	1000	-
Cl. No. 5.2.2.3.1, Table No. 1A(Shape accuracy, girth and length)	-	10000	-
Cl. No. 5.2.2.3.2(Edge straightness deviation)	-	10000	-
Cl. No. 5.2.2.3.3(Maximum cross-curve deviation)	-	10000	-
5.3.6.4( Vents)	-	5000	Combined test charges for Clause 5.3.6.4, Clause 5.3.6.5 and Clause 5.3.6.6
As per Clause 5.3.6.5(Laminated Glass)	-	5000	Combined test charges for Clause 5.3.6.4, Clause 5.3.6.5 and Clause 5.3.6.6
As per Clause 5.3.6.6(Laminated Glass)	-	5000	Combined test charges for Clause 5.3.6.4, Clause 5.3.6.5 and Clause 5.3.6.6
As per Clause 5.2.9(Toughened)	-	3000	-
As per Clause 5.2.8.2(Toughened)	-	3000	-
As per Clause 5.2.8.4(Toughened)	-	3000	-
As per Clause 5.3.9(Laminated Glass)	-	5000	-

10 Apr, 2026

-
-

1586

Alpha Test House Services LLP

IS 1363 : Part 2 (2023)

Hexagon head bolts, screws and nuts of product grade C Part 2 Hexagon head screws (Size range M5 to M64) (sixth revision)

Size range M5 to M64

17500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Dimensions)	-	17500	-
5- Table 4 -(i)(General requirements)	-	17500	-
5- Table 4 -(ii)(Thread)	-	17500	-
5- Table 4 -(iii)(Mechanical properties)	-	17500	-
5- Table 4 -(iv)(Tolerances)	-	17500	-
5- Table 4 -(v)(Surface condition)	-	17500	-
5- Table 4 -(vi)(Surface integrity)	-	17500	-
5- Table 4 -(vii)(Acceptability)	-	17500	-
6(Marking and labelling)	-	17500	-
7(Designation)	-	17500	-
4(Finish -Electrolite zinc coating)	-	17500	-

31 Dec, 2026

-
-

1587

Atmy Analytical Labs Pvt. Ltd.

IS 17636 (2021)

Bunk Beds - Specification

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CLAUSE 4(DESIGN AND WORKMANSHIP)	-	45000	-
CLAUSE 5(DIMENSIONS)	-	45000	-
CLAUSE 6(SURFACE PERFORMANCE)	-	45000	-
CLAUSE 6.2(Fabric and Leather (Synthetic and Natural) Performance)	-	45000	-
CLAUSE 7.5.1(Attachment, Deflection and Strength of Ladder and Treads)	-	45000	-
CLAUSE 7.6(Strength of Frame and Fastenings)	-	45000	-
CLAUSE 7.7(Stability Test)	-	45000	-
CLAUSE 7.8(Fastening of Upper Bed to Lower Bed)	-	45000	-
Cl-5(Dimensions)	-	45000	-
Cl-6.1 (a)(Resistance to mechanical damage)	-	45000	-
Cl-6.1 (b)(Pencil hardness)	-	45000	-
Cl-6.1 (c)(Resistance to wet heat)	-	45000	-
Cl-6.1 (d)(Resistance to dry heat)	-	45000	-
Cl-6.1 (e)(Resistance to marking by cold liquids)	-	45000	-
Cl-6.1 (f)(Resistance to marking by cold oils and fats)	-	45000	-
Cl-6.1 (g)(Adhesive performance)	-	45000	-
Cl-6.2 (a) 1(Breaking load)	-	45000	-
Cl-6.2 (a) 2(Elongation at break)	-	45000	-
Cl-6.2 (a) 3(Tear strength)	-	45000	-
Cl-6.2 (a) 5(Colour fastness to rubbing)	-	45000	-
Cl-6.2 (a) 4(Colour fastness to light)	-	45000	-
Cl-6.2 (a) 6(Colour fastness to perspiration)	-	45000	-
Cl-6.2 (a) 7(Colour fastness to water)	-	45000	-
Cl-6.2 (a) 8(Pilling resistance)	-	45000	-
Cl-6.2 (a) 9(Coating adhesion strength)	-	45000	-
Cl-6.2 (a) 10(Seam slippage)	-	45000	-
Cl-6.2 (a) 11(Resistance to damage by flexing)	-	45000	-
Cl-6.2 (a) 12(Abrasion resistance)	-	45000	-
Cl-6.2 (a) 13(Bursting strength)	-	45000	-
Cl-6.2 (a) 14(Resistance to cold)	-	45000	-
Cl-6.2 (b) 1(Tear strength)	-	45000	-
Cl-6.2 (b) 2(Flexing endurance)	-	45000	-
Cl-6.2 (b) 3(Finish adhesion)	-	45000	-
Cl-6.2 (b) 4(Colour fastness to artificial light)	-	45000	-
Cl-6.2 (b) 5(Colour fastness to rubbing)	-	45000	-
Cl-6.2 (b) 6(Colour fastness to water spotting)	-	45000	-
Cl-6.2 (b) 7(Water vapour permeability)	-	45000	-
Cl-6.2 (b) 8(Colour fastness to water)	-	45000	-
Cl-7.1(general test conditions)	-	45000	-
Cl-7.2.1(Top Bed Safety Barriers)	-	45000	-
Cl-7.2.2(Top Bed Safety Barriers)	-	45000	-
Cl-7.2.3(Top Bed Safety Barriers)	-	45000	-
Cl-7.2.4(Top Bed Safety Barriers)	-	45000	-
Cl-7.3.1(Gaps)	-	45000	-
Cl-7.3.2(Gaps)	-	45000	-
Cl-7.4.1(Bed Base)	-	45000	-
Cl-7.4.2(Bed Base)	-	45000	-
Cl-7.5.1(Attachment, Deflection and Strength of Ladder and Treads)	-	45000	-
Cl-7.5.2(Dimensions of Treads)	-	45000	-
Cl-7.6(Strength of Frame and Fastenings)	-	45000	-
Cl-7.7(Stability)	-	45000	-
Cl-7.8(Fastening of Upper Bed to Lower Bed)	-	45000	-
Cl-10(Marking)	-	45000	-
CLAUSE 4(DESIGN AND WORKMANSHIP)	-	45000	-
CLAUSE 5(DIMENSIONS)	-	45000	-
CLAUSE 6(SURFACE PERFORMANCE)	-	45000	-
CLAUSE 6.2(Fabric and Leather (Synthetic and Natural) Performance)	-	45000	-
CLAUSE 7.5.1(Attachment, Deflection and Strength of Ladder and Treads)	-	45000	-
CLAUSE 7.6(Strength of Frame and Fastenings)	-	45000	-
CLAUSE 7.7(Stability Test)	-	45000	-
CLAUSE 7.8(Fastening of Upper Bed to Lower Bed)	-	45000	-
Cl-5(Dimensions)	-	45000	-
Cl-6.1 (a)(Resistance to mechanical damage)	-	45000	-
Cl-6.1 (b)(Pencil hardness)	-	45000	-
Cl-6.1 (c)(Resistance to wet heat)	-	45000	-
Cl-6.1 (d)(Resistance to dry heat)	-	45000	-
Cl-6.1 (e)(Resistance to marking by cold liquids)	-	45000	-
Cl-6.1 (f)(Resistance to marking by cold oils and fats)	-	45000	-
Cl-6.1 (g)(Adhesive performance)	-	45000	-
Cl-6.2 (a) 1(Breaking load)	-	45000	-
Cl-6.2 (a) 2(Elongation at break)	-	45000	-
Cl-6.2 (a) 3(Tear strength)	-	45000	-
Cl-6.2 (a) 5(Colour fastness to rubbing)	-	45000	-
Cl-6.2 (a) 4(Colour fastness to light)	-	45000	-
Cl-6.2 (a) 6(Colour fastness to perspiration)	-	45000	-
Cl-6.2 (a) 7(Colour fastness to water)	-	45000	-
Cl-6.2 (a) 8(Pilling resistance)	-	45000	-
Cl-6.2 (a) 9(Coating adhesion strength)	-	45000	-
Cl-6.2 (a) 10(Seam slippage)	-	45000	-
Cl-6.2 (a) 11(Resistance to damage by flexing)	-	45000	-
Cl-6.2 (a) 12(Abrasion resistance)	-	45000	-
Cl-6.2 (a) 13(Bursting strength)	-	45000	-
Cl-6.2 (a) 14(Resistance to cold)	-	45000	-
Cl-6.2 (b) 1(Tear strength)	-	45000	-
Cl-6.2 (b) 2(Flexing endurance)	-	45000	-
Cl-6.2 (b) 3(Finish adhesion)	-	45000	-
Cl-6.2 (b) 4(Colour fastness to artificial light)	-	45000	-
Cl-6.2 (b) 5(Colour fastness to rubbing)	-	45000	-
Cl-6.2 (b) 6(Colour fastness to water spotting)	-	45000	-
Cl-6.2 (b) 7(Water vapour permeability)	-	45000	-
Cl-6.2 (b) 8(Colour fastness to water)	-	45000	-
Cl-7.1(general test conditions)	-	45000	-
Cl-7.2.1(Top Bed Safety Barriers)	-	45000	-
Cl-7.2.2(Top Bed Safety Barriers)	-	45000	-
Cl-7.2.3(Top Bed Safety Barriers)	-	45000	-
Cl-7.2.4(Top Bed Safety Barriers)	-	45000	-
Cl-7.3.1(Gaps)	-	45000	-
Cl-7.3.2(Gaps)	-	45000	-
Cl-7.4.1(Bed Base)	-	45000	-
Cl-7.4.2(Bed Base)	-	45000	-
Cl-7.5.1(Attachment, Deflection and Strength of Ladder and Treads)	-	45000	-
Cl-7.5.2(Dimensions of Treads)	-	45000	-
Cl-7.6(Strength of Frame and Fastenings)	-	45000	-
Cl-7.7(Stability)	-	45000	-
Cl-7.8(Fastening of Upper Bed to Lower Bed)	-	45000	-
Cl-10(Marking)	-	45000	-

25 Feb, 2027

-
Included w.e.f 04.06.2025

1588

INDIAN TESTING LABORATORY PRIVATE LIMITED

IS 14756 (2024)

Stainless Steel Utensils - Specification (THIRD REVISION)

28500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 3.1(Material used for manufacturing utensils)	-	500	-
Cl 3.2(Material used for composite bottom)	-	500	-
Cl 3.3(Material used for body of utensil of 3-ply construction)	-	500	-
Cl 3.4(Material used for stainless steel lid)	-	500	-
Cl 3.5(Material used for tempered glass lid)	-	500	-
Cl 3.5(Material used for stainless steel rim)	-	500	-
Cl 4.2 & Table 1(Minimum Sheet Thickness for Body of Utensil)	-	500	-
Cl 4.2 & Table 2(Minimum Sheet Thickness for Lid of Utensil)	-	500	-
Cl 4.2(Thickness of the finished utensil)	-	500	-
Cl 4.3(Classification)	-	100	-
Cl 4.4 (i)(Thickness of Aluminium disc/core)	-	500	-
Cl 4.4 (ii)(Thickness of Protector/cowl)	-	500	-
Cl 4.5(Minimum sheet thickness (3-ply utensil))	-	500	-
Cl 4.5(Thickness of finished utensil (3-ply utensil))	-	500	-
Cl 5.1(Manufacturing defect & visual appearance)	-	100	-
CL 5.2(Accessibility for cleaning)	-	100	-
Cl 5.3(Joining of handles to the utensils)	-	100	-
Cl 5.4(Requirement for handles)	-	1000	-
Cl 5.5(Welding (Finish))	-	500	-
Cl 5.6(Finish of 3-ply utensil)	-	500	-
Cl 5.7(Requirement for coating)	-	500	-
Cl 5.8(Coating thickness test)	-	500	-
Cl 5.8(Coating adhesion test)	-	500	-
Cl 5.8.1(Thermal shock test (Coating))	-	500	-
Cl 6.1(Staining Test (Type Test - Frequency Once in a Year))	-	500	-
Cl 6.2(Mechanical Shock Test (for Cladded Utensils Only))	-	1000	-
Cl 6.3(Thermal Shock Test (for Cladded Utensils Only))	-	1000	-
Cl 6.4(Dry Heat Test (for Cladded Utensils Only))	-	500	-
Cl 6.5(Coating Thickness Test (for Copper Deposit))	-	500	-
Cl 6.6(Thermal shock test (3-ply construction utensil body))	-	500	-
Cl 6.7(Nominal Capacity Test)	-	500	-
Cl 8(Marking)	-	500	-
3.1(a) Carbon)	-	1000	-
3.1(b) Silicon)	-	1000	-
3.1(c)Manganese)	-	1000	-
3.1(d) Nickel)	-	1000	-
3.1(Chromium)	-	1000	-
3.1(Sulphu)	-	1000	-
3.1(Phosphorus)	-	1000	-
Stainless Steel Utensils - Specification (THIRD REVISION)(Copper)	-	500	-
3.1(Nitrogen)	-	1000	-
3.2 a(a) Carbon)	-	1000	-
3.2 a(b) Silicon)	-	1000	-
68995(Manganese)	-	1000	-
3.2 a(d) Nickel)	-	1000	-
3.2 a(Chromium)	-	1000	-
3.2 a(Sulphur)	-	1000	-
3.2 a(g) Phosphorus)	-	1000	-
3.2 a(h) Copper)	-	1000	-
3.2 a(Nitrogen)	-	1000	-
3.2 b(a) Aluminium)	-	1000	-
3.2 b(b) Copper)	-	1000	-
3.2 b(c) Magnesium)	-	1000	-
3.2 b(d) Silicon)	-	1000	-
3.2 b(e) Iron)	-	1000	-
3.2 b(f) Manganese)	-	1000	-
3.2 b(d) Silicon)	-	1000	-
3.2 b(f) Manganese)	-	1000	-
3.2 b(g) Zinc)	-	1000	-
3.2 b(h) Titanium)	-	1000	-
3.2 b(i) Chromium)	-	1000	-
3.2 b(j) Cu+Si+Fe+Mn+Zn+mg)	-	1000	-
3.2 b(k) Lead)	-	1000	-
3.2 c(a) Carbon)	-	1000	-
3.2 c(b) Silicon)	-	1000	-
3.2 c(c) Manganese)	-	1000	-
3.2 c(d) Nickel)	-	1000	-
3.2 c(e) Chromium)	-	1000	-
3.2 c(f) Sulphur)	-	1000	-
3.2 c(g) Phosphorus)	-	1000	-
3.3(a) Inner layer)	-	500	-
3.3(b) Middlelayer)	-	500	-
3.3(c) Outerlayer)	-	500	-
3.4(a) Carbon)	-	1000	-
3.4(b) Silicon)	-	1000	-
3.4(c) Manganese)	-	1000	-
3.4(d) Nickel)	-	1000	-
3.4(e) Chromium)	-	1000	-
3.4(f) Sulphur)	-	1000	-
3.4(g) Phosphorus)	-	1000	-
3.4(h) Copper)	-	1000	-
3.4(i) Nitrogen)	-	1000	-
3.4(Thickness stainless steel lid)	-	500	-
3.5(If the utensils provided with tempered glass lid)	-	500	-
4.1(Shapes and Dimensions)	-	1000	-
4.2(Thickness of the sheet)	-	500	-
4.3(Classifications)	-	100	-
4.3(Core Thickness for 3-ply Construction (asper IS15960))	-	500	-
4.3(Thickness of protective layer (as per IS 15960))	-	500	-
4.4(Thickness of 3ply full body utensil)	-	500	-
5(Workmanship and finish)	-	500	-
5.4(Handles)	-	2000	-
4.1 of IS 13395(Construction)	-	500	-
4.2 of IS 13395(Materials)	-	2000	-
4.3 of IS 13395(Selection and Size)	-	500	-
4.4 of Is 13395(Position of Handle and Knob with Respect to Cookware)	-	500	-
4.5 of IS 13395(Attachment to Cookware)	-	500	-
5.2 of IS 13395(Bending Strength)	-	1000	-
5.3 of IS 13395(Torque Strength)	-	1000	-
5.4 of IS 13395(Impact Strength)	-	1000	-
5.5 of IS 13395(Fatigue Resistance 15 000 cycles withstand)	-	1000	-
5.6 of IS 13395(Leakage)	-	1000	-
5.7 of IS 13395(Thermal Insulation)	-	1000	-
5.8 of IS 13395(Heat Resistance)	-	1000	-
5.9 of IS 13395(Washing Resistance)	-	1000	-
5.10 of IS 13395(Burning Resistance)	-	1000	-
5.5(Material comes in contact with food)	-	500	-
6.1(Staining Test)	-	1000	-
6.2(Mechanical Shock Test)	-	1000	-
6.3(Thermal Shock Test)	-	1000	-
6.4(Dry Heat Test)	-	1000	-
6.6(Heat test)	-	1000	-
6.7.1(Nominal Capacity Test)	-	500	-
6.7.2(Internal diameter of utensil)	-	500	-
3.2 b(e) Iron)	-	1000	-
Cl 3.1(Material used for manufacturing utensils)	-	0	-
Cl 3.2(Material used for composite bottom)	-	0	-
Cl 3.3(Material used for body of utensil of 3-ply construction)	-	0	-
Cl 3.4(Material used for stainless steel lid)	-	0	-
Cl 3.5(Material used for tempered glass lid)	-	0	-
Cl 3.5(Material used for stainless steel rim)	-	0	-
Cl 4.2 & Table 1(Minimum Sheet Thickness for Body of Utensil)	-	0	-
Cl 4.2 & Table 2(Minimum Sheet Thickness for Lid of Utensil)	-	0	-
Cl 4.2(Thickness of the finished utensil)	-	0	-
Cl 4.3(Classification)	-	0	-
Cl 4.4 (i)(Thickness of Aluminium disc/core)	-	0	-
Cl 4.4 (ii)(Thickness of Protector/cowl)	-	0	-
Cl 4.5(Minimum sheet thickness (3-ply utensil))	-	0	-
Cl 4.5(Thickness of finished utensil (3-ply utensil))	-	0	-
Cl 5.1(Manufacturing defect & visual appearance)	-	0	-
CL 5.2(Accessibility for cleaning)	-	0	-
Cl 5.3(Joining of handles to the utensils)	-	0	-
Cl 5.4(Requirement for handles)	-	0	-
Cl 5.5(Welding (Finish))	-	0	-
Cl 5.6(Finish of 3-ply utensil)	-	0	-
Cl 5.7(Requirement for coating)	-	0	-
Cl 5.8(Coating thickness test)	-	0	-
Cl 5.8(Coating adhesion test)	-	0	-
Cl 5.8.1(Thermal shock test (Coating))	-	0	-
Cl 6.1(Staining Test (Type Test - Frequency Once in a Year))	-	0	-
Cl 6.2(Mechanical Shock Test (for Cladded Utensils Only))	-	0	-
Cl 6.3(Thermal Shock Test (for Cladded Utensils Only))	-	0	-
Cl 6.4(Dry Heat Test (for Cladded Utensils Only))	-	0	-
Cl 6.5(Coating Thickness Test (for Copper Deposit))	-	0	-
Cl 6.6(Thermal shock test (3-ply construction utensil body))	-	0	-
Cl 6.7(Nominal Capacity Test)	-	0	-
Cl 8(Marking)	-	0	-
3.1(a) Carbon)	-	0	-
3.1(b) Silicon)	-	0	-
3.1(c)Manganese)	-	0	-
3.1(d) Nickel)	-	0	-
3.1(Chromium)	-	0	-
3.1(Sulphu)	-	0	-
3.1(Phosphorus)	-	0	-
Stainless Steel Utensils - Specification (THIRD REVISION)(Copper)	-	0	-
3.1(Nitrogen)	-	0	-
3.2 a(a) Carbon)	-	0	-
3.2 a(b) Silicon)	-	0	-
68995(Manganese)	-	0	-
3.2 a(d) Nickel)	-	0	-
3.2 a(Chromium)	-	0	-
3.2 a(Sulphur)	-	0	-
3.2 a(g) Phosphorus)	-	0	-
3.2 a(h) Copper)	-	0	-
3.2 a(Nitrogen)	-	0	-
3.2 b(a) Aluminium)	-	0	-
3.2 b(b) Copper)	-	0	-
3.2 b(c) Magnesium)	-	0	-
3.2 b(d) Silicon)	-	0	-
3.2 b(e) Iron)	-	0	-
3.2 b(f) Manganese)	-	0	-
3.2 b(d) Silicon)	-	0	-
3.2 b(f) Manganese)	-	0	-
3.2 b(g) Zinc)	-	0	-
3.2 b(h) Titanium)	-	0	-
3.2 b(i) Chromium)	-	0	-
3.2 b(j) Cu+Si+Fe+Mn+Zn+mg)	-	0	-
3.2 b(k) Lead)	-	0	-
3.2 c(a) Carbon)	-	0	-
3.2 c(b) Silicon)	-	0	-
3.2 c(c) Manganese)	-	0	-
3.2 c(d) Nickel)	-	0	-
3.2 c(e) Chromium)	-	0	-
3.2 c(f) Sulphur)	-	0	-
3.2 c(g) Phosphorus)	-	0	-
3.3(a) Inner layer)	-	0	-
3.3(b) Middlelayer)	-	0	-
3.3(c) Outerlayer)	-	0	-
3.4(a) Carbon)	-	0	-
3.4(b) Silicon)	-	0	-
3.4(c) Manganese)	-	0	-
3.4(d) Nickel)	-	0	-
3.4(e) Chromium)	-	0	-
3.4(f) Sulphur)	-	0	-
3.4(g) Phosphorus)	-	0	-
3.4(h) Copper)	-	0	-
3.4(i) Nitrogen)	-	0	-
3.4(Thickness stainless steel lid)	-	0	-
3.5(If the utensils provided with tempered glass lid)	-	0	-
4.1(Shapes and Dimensions)	-	0	-
4.2(Thickness of the sheet)	-	0	-
4.3(Classifications)	-	0	-
4.3(Core Thickness for 3-ply Construction (asper IS15960))	-	0	-
4.3(Thickness of protective layer (as per IS 15960))	-	0	-
4.4(Thickness of 3ply full body utensil)	-	0	-
5(Workmanship and finish)	-	0	-
5.4(Handles)	-	0	-
4.1 of IS 13395(Construction)	-	0	-
4.2 of IS 13395(Materials)	-	0	-
4.3 of IS 13395(Selection and Size)	-	0	-
4.4 of Is 13395(Position of Handle and Knob with Respect to Cookware)	-	0	-
4.5 of IS 13395(Attachment to Cookware)	-	0	-
5.2 of IS 13395(Bending Strength)	-	0	-
5.3 of IS 13395(Torque Strength)	-	0	-
5.4 of IS 13395(Impact Strength)	-	0	-
5.5 of IS 13395(Fatigue Resistance 15 000 cycles withstand)	-	0	-
5.6 of IS 13395(Leakage)	-	0	-
5.7 of IS 13395(Thermal Insulation)	-	0	-
5.8 of IS 13395(Heat Resistance)	-	0	-
5.9 of IS 13395(Washing Resistance)	-	0	-
5.10 of IS 13395(Burning Resistance)	-	0	-
5.5(Material comes in contact with food)	-	0	-
6.1(Staining Test)	-	0	-
6.2(Mechanical Shock Test)	-	0	-
6.3(Thermal Shock Test)	-	0	-
6.4(Dry Heat Test)	-	0	-
6.6(Heat test)	-	0	-
6.7.1(Nominal Capacity Test)	-	0	-
6.7.2(Internal diameter of utensil)	-	0	-
3.2 b(e) Iron)	-	0	-

15 Aug, 2028

-
Included w.e.f 11.02.2025

1589

INDIAN TESTING LABORATORY PRIVATE LIMITED

IS 4990 (2024)

PLYWOOD FOR CONCRETE SHUTTERING WORKS SPECIFICATION (Fourth Revision)

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Timber)	-	0	-
Cl-5.2(Adhesives for Bonding of Veneers)	-	0	-
Cl-6.1(Manufacture)	-	0	-
Cl-6.2(Manufacture ( Thickness of veneers))	-	0	-
Cl-6.3(Manufacture ( Physical and mechanical properties of veneers))	-	0	-
Cl-6.4, 6.7(Manufacture (Plywood for concrete shuttering))	-	0	-
Cl-6.5(Manufacture (Scarf joints))	-	0	-
Cl-6.6(Manufacture ( Preservative treatment))	-	0	-
Cl-7.1(Dimensions -length)	-	1000	-
Cl-7.2(Thickness)	-	500	-
Cl-7.3(Squareness)	-	500	-
Cl-8.1, 8.2(Workmanship and finish)	-	500	-
Cl-10.3(Moisture Content)	-	1000	-
Cl-10.4.1(Glue Adhesion in Dry State - Glue Shear Strength)	-	1000	-
Cl-10.4.2(Glue Adhesion in Dry State - Adhesion of Plies)	-	1000	-
Cl-10.5, 10.5.1(Resistance to Water Test)	-	1000	-
Cl-10.5.1.1(Water Resistance Test-Glue shear strength)	-	1000	-
Cl-10.5.1.2(Water Resistance Test-Adhesion of plies)	-	1000	-
Cl-10.5.2(Water Resistance Test (Alternate method))	-	1000	-
Cl-10.6(Water resistance test (Concrete shuttering Plywood))	-	1000	-
Cl-10.7.1, Table-2(Mycological Test- Glue shear strengt)	-	1000	-
Cl-10.7.2(Mycological Test- Adhesion of plies)	-	1000	-
Cl-10.8(Tensile Strength)	-	1000	-
Cl-10.9, Table-3 (i)(Along (parallel to the grain direction of the face veneer))	-	1000	-
Cl-10.9, Table-3 (ii)(Across (perpendicular to the grain direction of the face veneer))	-	1000	-
Cl-10.10, Table-4 (i) a(Wet Bending Strength -Modulus of Elasticity (MOE),- Average)	-	1000	-
Cl-10.10, Table-4 (i) b(Wet Bending Strength - Modulus of Elasticity (MOE),- Minimum individual)	-	1000	-
Cl-10.11(Retention of Preservative)	-	1000	-
Cl-10.12(Formaldehyde Content Test)	-	2000	-

15 Aug, 2028

-
Included w.e.f 24.02.2025 Exclusion : Cl 10.13 Steady-State Formaldehyde Emission Test

1590

JBS TESTING SOLUTIONS PVT LTD

IS 2028 (2004)

Open jaw wrenches (Spanners) - Specification (Fijih Revision)

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Dimensions- a)	-	8500	-
3.1(Dimensions- b)	-	8500	-
3.1(Dimensions- l)	-	8500	-
3.2, 3.3, 3.4(Dimensions- a)	-	8500	-
3.2, 3.3, 3.4(Dimensions- b1)	-	8500	-
3.2, 3.3, 3.4(Dimensions- b2)	-	8500	-
3.2, 3.3, 3.4(Dimensions- l)	-	8500	-
5(Hardness- upto 32 mm)	-	8500	-
5(Hardness- over 32 mm)	-	8500	-
6(Workmanship And Finish)	-	8500	-
6(Workmanship And Finish)	-	8500	-
6(Workmanship And Finish)	-	8500	-
8(Tourque test)	-	8500	-
4(Chemical Composition)	-	8500	-
3.1(Dimensions- a)	-	0	-
3.1(Dimensions- b)	-	0	-
3.1(Dimensions- l)	-	0	-
3.2, 3.3, 3.4(Dimensions- a)	-	0	-
3.2, 3.3, 3.4(Dimensions- b1)	-	0	-
3.2, 3.3, 3.4(Dimensions- b2)	-	0	-
3.2, 3.3, 3.4(Dimensions- l)	-	0	-
5(Hardness- upto 32 mm)	-	0	-
5(Hardness- over 32 mm)	-	0	-
6(Workmanship And Finish)	-	0	-
6(Workmanship And Finish)	-	0	-
6(Workmanship And Finish)	-	0	-
8(Tourque test)	-	0	-
4(Chemical Composition)	-	0	-

04 Dec, 2028

-
Included w.e.f. 28.03.2025

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number